NETWORK CAMERA
Model: IK-WD31A
Quick Start Guide and Important Safeguards
This guide describes the hardware installation.
Refer to the user's manual (PDF file) contained in the CD-ROM for settings, operations
and other information.
The application Adobe® Reader® is needed to view PDF files. If you do not have this
application, download it from the Adobe Systems Incorporated website.
For information on our latest products and peripheral devices, refer to the following
Website:
If the URL changes, refer to the Toshiba website (http://www.toshiba.com).
Download from Www.Somanuals.com. All Manuals Search And Download.
Thank you for purchasing the IK-WD31A Network Camera. Before using the
camera, read this quick start guide carefully to ensure correct usage. After reading
this quick start guide, save it for future reference.
The design, specifications, software, and quick start guide contents are subject to
change without prior notice.
Terms
The term "OS" is used in this manual to indicate operating systems compatible
with this product.
l
-- Microsoft® Windows Vista® Business Edition
-- Microsoft® Windows® 7 Professional Edition
NOTE
l The performance of the network camera may vary depending on the network
environment.
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Table of Contents
Introduction
2
FCC (USA)-INFORMATION.......................................................................................2
Terms .........................................................................................................................3
Table of Contents.............................................................................................. 4
Important Safeguards....................................................................................... 5
Important Safeguards (Cont.)........................................................................... 7
Notes on Use and Installation........................................................................... 8
Setting the Network Camera Environment....................................................... 9
Items needed for network camera monitoring...........................................................9
Contents......................................................................................................... 10
Physical Description .......................................................................................11
Hardware Installation ..................................................................................... 13
Network Deployment ..................................................................................... 15
Assigning IP Address...................................................................................... 17
Retrieving Images........................................................................................... 18
Adjusting the Lens.......................................................................................... 19
Dome cover .................................................................................................... 20
Adjusting the Zoom and Focus....................................................................... 21
Trademarks .................................................................................................... 22
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Important Safeguards
1. Read Instructions
Read all the safety and operating instructions before operating the product.
2. Retain Instructions
Retain the safety instructions and user's manual for future reference.
3. Warnings
Comply with all warnings on the product and in the user's manual.
4. Follow Instructions
Follow all operating and use instructions.
5. Cleaning
Disconnect this camera from the power supply before cleaning.
6. Attachments
Do not use attachments not recommended by the camera manufacturer as they may pose
safety risks.
7. Water and Moisture
Do not use this camera near water. Some examples are: near a bath tub, wash bowl,
kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.
8. Accessories
Do not place this camera on an unstable cart, stand, tripod, bracket or table. The camera
may fall, causing serious injury to a person, or serious damage to the product. Use only
with stand, tripod,bracket,or table recommended by the manufacturer, or sold with the
camera. Any mounting of the product should follow the manufacturer's instructions, and
should use a mounting accessory recommended by the manufacturer.
9. Ventilation
This camera should never be placed near or over a radiator or heat register. If this product
is placed in a built-in installation, verify that there is proper ventilation so that the camera
temperature operates within the recommended temperature range.
10. Power Sources
This camera should be operated only from the type of power source indicated on the
information label. If you are not sure of the type of power supply at your location, consult
your product dealer.
11. Power-Cord Protection
Power cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them. Pay particular attention to cords at plugs, screws and
the point where they exit the product.
12. Installation
Install this camera on a secure part of the ceiling or wall. If installed on an unsecured
location, the camera could fall causing injury and damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
13. Lightning
For additional protection on this camera during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the wall outlet and
disconnect the power supply and cable system. This will prevent damage to the camera
due to lightning and power-line surges. If lightning occurs, do not touch the unit or any
connected cables in order to avoid electric shock.
14. Overloading
Do not overload the power supply or extension cords as this can result in a risk of fire or
electric shock.
15. Object and Liquid Entry
Never push objects of any kind into this camera through openings as they may touch
dangerous electrical points or short-out parts that could result in a fire or electrical shock.
Never intentionally spill liquid of any kind on the camera.
16. Servicing
Do not attempt to service this camera yourself as opening or removing covers may expose
you to dangerous electrical or other hazards. Refer all servicing to qualified service
personnel.
17. Damage Requiring Service
Disconnect this camera from the power supply and refer servicing to qualified service
personnel under the following conditions.
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the camera.
c. If the camera has been submerged in water.
d. If the camera does not operate normally by following the operating instructions in the
user's manual. Adjust only those controls that are covered by the user's manual as
an improper adjustment of other controls may result in damage and will often require
extensive work by a qualified technician to restore the camera to its normal operation.
e. If the camera has been dropped or the cabinet has been damaged.
f. When the camera exhibiting a distinct change in performance which indicates a need for
service.
g. Other trouble.
18. Other trouble. Replacement Parts
When replacing parts, be sure the service technician uses parts specified by the
manufacturer or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
19. Safety Check
Upon completion of any service or repairs to this camera, ask the service technician to
perform safety checks to determine that the camera is in proper operating condition.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Important Safeguards (Cont.)
CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral
triangle, is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
FIELD INSTALLATION MARKING:
WORDED: “THIS INSTALLATION SHOULD BE MADE BY A QUALIFIED SERVICE
PERSON AND SHOULD CONFORM TO ALL LOCAL CODES.”
This product is intended to be supplied by a Listed Power Adapter with LPS, rated PoE 36~57V,
0.35~0.15A or 12V DC, 1.0A minimum.
The product is not likely to require connection to an Ethernet network with outside plant routing,
including campus environment; and the installation instructions clearly state that the ITE is to be
connected only to PoE networks without routing to the outside plant.
Ce produit est conçu pour être alimenté par un adaptateur secteur Listed avec LPS, classé PoE
36~57V, 0.35~0.15A ou 12V DC, 1.0A minimum.
Le produit ne est pas susceptible de nécessiter une connexion à un réseau Ethernet avec
l'extérieur routage des plantes, y compris l'environnement de campus; et les instructions
d'installation clairement que l' état ITE doit être raccordé uniquement aux réseaux PoE sans
routage vers le installations extérieures.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Notes on Use and Installation
Do not aim the camera at the sun
l
Never aim the camera at the sun even with the camera power off.
Do not shoot intense light
l
Intense light such as a spotlight may cause a bloom or smear. A vertical stripe
may appear on the screen. However, this is not a malfunction.
Treat the camera with care
l
Dropping or subjecting the camera to intense vibration may cause it to
malfunction.
Never touch internal parts
l
l
Do not touch the internal parts of the camera other than the parts specified.
Keep the camera installation away from video noise
If cables are wired near electric lighting wires or a TV set, noise may appear in
images. In this event relocate cables or reinstall equipment.
Check the ambient temperature and humidity
l
l
Avoid using the camera where the temperature is hotter or colder than the
specified operating range. Doing so could affect the internal parts or cause the
image quality to deteriorate. Special care is required to use the camera at high
temperature and humidity.
Should you notice any trouble
If any trouble occurs while you are using the camera, turn off the power and
contact your dealer. If you continue to use the camera when there is something
wrong with it, the trouble may get worse and an unpredictable problem may
occur.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Setting the Network Camera Environment
Items needed for network camera monitoring
Administrator's personal computer
l
The personal computer that allows setting, operating, monitoring and other
functions with the network camera is called the "administrator's personal
computer" in this guide.
* The personal computer for viewing monitored images is called the "user's
personal computer" in this quick start guide. The network camera can be
viewed by more than one personal computer at the same time.
Recommended personal computer system requirements:
-- Windows Vista® Business, or Windows® 7 professional.
-- Internet Explorer® Ver 8.0
l
-- CPU: Intel® CoreTM 2 Duo 2GHz or greater
-- Memory: 1GB RAM or greater
Connection equipment such as LAN cables, and switch or router.
-- The LAN cable type differs depending on the connection method.
Camera search application "Installation Wizard"
l
l
-- Install this application from the CD-ROM supplied as an accessory (Double-click
"Setup.exe" in the CD-ROM and install the application by following the onscreen
instructions.)
-- This application is the tool to discover the IP address of a camera. Using this
application, the IP address of a camera can be easily determined.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Contents
IK-WD31A
AV Out cable
l
l
CD-ROM
Alignment Sticker
l
l
P/N : 62XXXXXXXG
Warranty Card
Quick Start Guide and Important
Safeguards
l
l
NETWORK CAMERA
Model: IK-WD31A
Quick Start Guide and Important Safeguards
This guide describes the hardware installation.
Refer to the user's manual (PDF file) contained in the CD-ROM for settings, operations
and other information.
The application Adobe® Reader® is needed to view PDF files. If you do not have this
application, download it from the Adobe Systems Incorporated website.
n
For information on our latest products and peripheral devices, refer to the following
Website:
n
If the URL changes, refer to the Toshiba website (http://www.toshiba.com).
Torx driver
Screws and Anchors
l
l
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Physical Description
Dome cover
Internal microphone
Cover screws
Clear cover
Knock out
Tilt adjustment screws
Lens cover
Mounting holes
Download from Www.Somanuals.com. All Manuals Search And Download.
11
CAMERA MAIN UNIT
Front View
l
IR LEDs
Lens
Light Sensor
Focus Button
Built-in
Microphone
Status LED
Rear View
l
General IO
Terminal Block
Micro SD/
SDHC/SDXC
Card Slot
1. GND
2. Power input (12V DC)
3. Do not use
4. Do not use
5. Signal GND
6. Digital Input
7. Digital output
8. 12V DC Output
Recessed
Reset Button
DIP switch
10/100BaseT
Video Output
Microphone
Ethernet Socket
NTSC
60Hz
internal
MIC In
(Printed "Audio In")
Audio/Video Out
(Printed "AV Out")
external
PAL
50Hz
1
2
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Hardware Installation
First, use the supplied driver to detach the dome cover from the camera base.
Then, follow the steps below to install the camera; either to a ceiling or to a wall.
Bottom of the
Camera
Dome
Cover
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Alignment sticker
Notes:
Alignment sticker
l The included screws and anchors are used to install the
camera to a solid surface. (e.g. concrete) If installing on loose
or thin material surfaces , use the appropriate anchors (not
included) with the screws.
l Generally the camera turns a built-in microphone in the
direction of object.
l Install the camera securely.
l Use Category (Cat) 5e or higher cable.
Mounting the camera to a solid surface
(1) Attach the Alignment Sticker to the surface.
(2) Drill three pilot holes (Ø0.28inch×1.57inches(D)
(Ø7mm×40mm(D))) through the three circles on the sticker.
(3) Hammer the supplied plastic anchors into the holes.
(4) Drill a hole (Ø1.0inch(Ø25mm)) behind the camera
body on the sticker, and lead the cables through this hole.
(5) Align the three mounting holes of the Camera with the three plastic
anchors; insert the included three screws to the corresponding holes and
tighten them with a driver.
Cable installation
If possible, lead all cables behind the camera body through a wall or ceiling.
If this is not possible, use the knock out on the camera cover to route the
cables through the side.
CAUTION
Installation should be done only by qualified personnel and conform to all local codes.
l
l Install this camera on a firm and solid part of the ceiling or wall.
If installed improperly or on a weak surface, the camera could fall causing injury and
damage.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Network Deployment
Power over Ethernet (PoE)
l
When using a PoE-enabled switch
The camera is PoE-compliant, allowing transmission of power and data via single LAN
cable. See the following illustration to connect the camera to a PoE switch via LAN
cable.
Client PC
R
O
(not supplied)
PoE switch
(not supplied)
l
When using a non-PoE switch
Use a PoE power injector (not supplied) to connect between the camera and a non-PoE
switch.
PoE power injector
(not supplied)
T
IO
I
N
non-PoE switch
(not supplied)
Client PC
(not supplied)
Download from Www.Somanuals.com. All Manuals Search And Download.
15
General Connection (without PoE)
1. Connect the camera to an Ethernet switch via LAN cable.
2. Connect the power cable from a power unit (not supplied) to the appropriate port of
the general I/O terminal.
(See page 12).
3. Connect the PC to an Ethernet switch via Ethernet cable.
Ethernet switch
(not supplied)
3
LINK
R
E
C
E
IV
P
OW
E
R
C
OLL
ISION
E
1
2
P
3
AR
T
IT
4
ION
5
1
Client PC
(not supplied)
2
120V AC
12V DC adapter
UL Listed power supply (not supplied)
NOTE
l Recommended power cord is twisted pair line with a minimum wire size of 18 AWG.
l The recommended power supply for this camera is 15 watts minimum.
l When PoE is connected, do not supply 12V DC to the I/O terminal.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Assigning IP Address
1. Install the "Installation Wizard" under the Software Utility directory from the CD-
ROM.
2. The program will analyze your network environment. After your network is
analyzed, please click on the "Next" button to continue the program.
Installation
Wizard
3. The program searches for other Network Cameras on the same network.
4. After searching, the main installer window will pop up. Double click on the MAC
address of the appropriate device to connect to the Network Camera.
00-02-D1-71-42-70
169.254.0.99
IK-WD31A
0002D1714270
NOTE
l If "Installation Wizard" does not find the camera during the search, try turning off the
wireless LAN of a PC.
l Installation Wizard can search the location of the Network Camera even though
DHCP is not used on the network. In this scenario, assign the camera a static
IP address because the IP address of the Network Camera has been assigned
169.254.*.* by default.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Retrieving Images
1. Access the Network Camera from the network.
2. Retrieve live video through Internet Explorer®.
For more information on camera configuration, please refer to user's
manual on the CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Adjusting the Lens
Based on the live image retrieved from the camera, adjust the camera lens by
performing the following:
To adjust the viewing angle
1. Turn the lens module left and right.
2. Loosen the tilt adjustment screws on both side of the camera and then turn the lens
module up and down. Upon completion, tighten the screws.
3. Turn the lens cover to adjust the image orientation.
2
3
Tilt 65o
1
DO NOT over rotate the lens. Doing
so will damage the camera lens
module
Pan 350o
Wall mounting
This camera is adjusted to the optimal position for ceiling mounting by default.
When installing to the wall, don't turn a lens cover 180 degrees.
And change the "Video orientation" of the camera.
Audio and Video>Image>General settings>Video settings> Video orientation:
Monitoring on the television
This camera is able to output an analog NTSC or PAL video signal and sound from the
Audio/Video Out jack.
Adjustment of Viewing angle is possible using a portable monitor without using a
personal computer when installing.
Use the included AV Out cable for this purpose.
Focus button
When adjusting the viewing angle, the camera focus may shift.
In this case, push the focus button on the camera body for 2 seconds or more. The
zoom lens will move to a wide position and the focus will move to the optimal position.
NOTE
l Depending on an object's conditions, the focus may not move to the optimal position.
In this case, focus the lens manually from your personal computer.
IMPORTANT:
Zoom and Focus adjustment is made via the Remote Focus function on
your web browser. There is no mechanical zoom or focus adjustment for the
camera.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Dome cover
1. Attach the dome cover to the camera.
NOTE
l Don't touch the lens and clear cover when installing. Clean the clear cover if
you touch it. After attaching the dome cover, make sure not to cover the light
sensor with dome cover.
2. Secure the two dome screws with a screwdriver. Make sure all parts of the
camera are securely installed.
2
1
Light
sensor
Dome
cover
The supplied screwdriver is exclusively
designed to match the dome screws. Do
not discard the screwdriver.
Clear
cover
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Adjusting the Zoom and Focus
Access to the Network Camera from the network, and click the configuration button on
the main page. Then click the following:
Audio and Video
Image
Zoom and Focus
To adjust the zoom factor and focus range
1. Use the Zoom slide bar to find an optimal view of the area of interest where you want
to adjust its focus. Click and drag the double-triangle pointer to rapidly adjust the
zoom ratio. Use the "W", "<" or "T", ">" button to adjust the zoom ratio definitely. The
Focus pointer moves with the Zoom pointer correspondingly.
2. Select Full view from the bottom of the screen.
3. Click on the Iris "Open" button, and wait 5 seconds. Lens iris will be open.
4. Click on the Focus "Start" button or "Full-range scan" button, and wait for the scan to
complete. When selected "Full-range scan", a full-range scan through the camera's
entire focal length can take about 80 seconds. When selected "Start", the focus scan
will only go through the length where optimal focus may occur, and that takes about
25 seconds.
5. After a short while, the clearest image obtained should be displayed. Then, click on
the Iris "Enable" button. Use the "N", "<" or "F", ">" button to fine tune the focus if
you are not satisfied with the results.
NOTE
l The focus may shift due to the refractive index of the dome cover.
To avoid this, verify the zoom and focus from your personal computer after
installation.
l Due to a change in temperature, the focus may shift after installation. Verify the
focus after installation and periodically.
l (One-Touch Focus) Depending on an object's conditions, focus may not
move to the optimal position. In this case, adjust the focus manually via the browser.
l For more information, please refer to user's manual on the CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Trademarks
Microsoft, Windows, Windows Vista and Intemet Explorer are trademarks or
registered trademarks of Microsoft Corporation in the United States and other
countries.
l
l Intel and Intel Core are trademarks or registered trademarks of
Intel Corporation or its subsidiaries in the United States and other
countries.
Adobe and Reader are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
l
Other product names appearing in this quick start guide may be trademarks or
registered trademarks of their respective holders.
l
Download from Www.Somanuals.com. All Manuals Search And Download.
22
TOSHIBA AMERICA INFORMATION SYSTEMS, INC.
Surveillance & IP Video Products
9740 Irvine Boulevard,
Irvine, CA 92618-1697
Phone Number: (877) 855-1349
625026700G
Download from Www.Somanuals.com. All Manuals Search And Download.
|