English
OWNER’S MANUAL
DLP™ PROJECTOR
TDP-MT200
Download from Www.Somanuals.com. All Manuals Search And Download.
English
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
RESPONSIBLE PARTY: Toshiba America Consumer Products LLC
82 Totowa Road, Wayne, New Jersey, 07470
Phone: (973)628-8000
WARNING:
USA only
Changes or modifications made to this equipment, not expressly approved by
Toshiba, or parties authorized by Toshiba, could void the user’s authority to
operate the equipment.
Notice:
CANADA only
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la classe B est conforme à la norme NMB-003 du Canada.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND
INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE
MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE
REFERENCE.
This set has been designed and manufactured to assure personal safety. Improper use can
result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you
if you observe the following procedures for installation, use and servicing. This unit is fully
transistorized and does not contain any parts that can be repaired by the user.
DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EXPOSED TO
DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL ONLY.
1. Read Owner's Manual
3. Source of Light
After unpacking this product, read
the owner's manual carefully, and
follow all the operating and other
instructions.
Do not look into the lens while the
lamp is on. The strong light from
the lamp may cause damage to
your eyes or sight.
4. Ventilation
2. Power Sources
Openings in the cabinet are
This product should be operated
only from the type of power source
indicated on the marking label.
If you are not sure of the type of
power supply to your home,
consult your product dealer or
local power company.
For products intended to operate
from battery power, or other
sources, refer to the operating
instructions.
provided for ventilation and to
ensure reliable operation of the
product and to protect it from
overheating, and these openings
must not be blocked or covered.
The openings should never be
blocked by placing the product on
a bed, sofa, rug or other similar
surface. This product should not
be placed in a built-in installation
such as a bookcase or rack unless
proper ventilation is provided or
the manufacturer's instructions
have been adhered to.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
English
5. Heat
8. Power-Cord Protection
The product should be situated
Power-supply cords should be
routed so that they are not likely to
be walked on or pinched by items
placed upon or against them,
paying particular attention to cords
at plugs, convenience receptacles,
and the point where they exit from
the product.
away from heat sources such as
radiators, heat registers, stoves, or
other products (including
amplifiers) that produce heat.
6. Water and Moisture
Do not use this product near water.
- for example, near a bath tub,
wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a
swimming pool and the like.
9. Overloading
Do not overload wall outlets;
extension cords, or integral
convenience receptacles as this
can result in a risk of fire or
electric shock.
7. Cleaning
Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Use a soft cloth for cleaning.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS (Continued)
10. Lightning storms
12. Do not place the product
vertically
For added protection for this
product during storm, or when it is
left unattended and unused for
long periods of time, unplug it from
the wall outlet. This will prevent
damage to the product due to
lightning and power-line surges.
However, while it is thundering or
lightning, do not touch the
Do not use the product in the
upright position to project the
pictures at the ceiling, or any other
vertical positions. It may fall down
and dangerous.
apparatus and any connected
cable and/or equipment.
This will prevent you from
receiving the electric shock by an
electric surge.
13. Stack Inhibited
Do not stack other equipment on
this product or do not place this
product on the other equipment.
Top and bottom plates of this
product develops heat and may
give some undesirable damage to
other unit.
11. Object and Liquid Entry
Never push objects of any kind
into this product through openings
as they may touch dangerous
voltage points or short-out parts
that could result in a fire or electric
shock. Never spill liquid of any
kind on the product.
14. Attachments
Do not use attachments not
recommended by the product
manufacturer as they may cause
hazards.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
English
e) If the product has been dropped or
damaged in any way.
f) When the product exhibits a
distinct change in performance -
this indicates a need for service.
15. Accessories
Do not place this product on an
unstable cart, stand, tripod,
bracket, or table. The product may
fall, causing serious injury to a
child or adult, and serious damage
to the product. A product and cart
combination should be moved with
care. Quick stops, excessive
force, and uneven surfaces may
cause the product and cart
17. If glass components,
including lens and lamp,
should break, contact your
dealer for repair service.
combination to overturn.
This product incorporates glass
components, including a lens and
a lamp. If such parts should
break, please handle with care to
avoid injury and contact your
dealer for repair service. The
broken pieces of glass may cause
to injury. In the unlikely event of
the lamp rupturing, thoroughly
clean the area around the
S3125A
16. Damage Requiring Service
projector and discard any edible
items placed in that area.
Unplug this product from the wall
outlet and refer servicing to
qualified service personnel under
the following conditions:
18. Servicing
Do not attempt to service this
product yourself as opening or
removing covers may expose you
to dangerous voltage or other
hazards. Refer all servicing to
qualified service personnel.
a) When the power-supply cord or
plug is damaged.
b) If liquid has been spilled, or
objects have fallen into the
product.
c) If the product has been exposed to
rain or water.
d) If the product does not operate
normally by following the operating
instructions. Adjust only those
controls that are covered by the
operating instructions as an
improper adjustment of other
controls may result in damage and
will often require extensive work by
a qualified technician to restore
the product to its normal
operation.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS (Continued)
19. Replacement Parts
22. Do not use the product in
a closed installation state.
When replacement parts are
required, be sure the service
technician has used replacement
parts specified by the
manufacturer or have the same
characteristics as the original part.
Unauthorized substitutions may
result in fire, electric shock, or
other hazards.
Do not place the product in a box
or in any other closed installation
state. Otherwise it may overheat.
This could result in a risk of fire.
(Replacement of the lamp only
should be made by users.)
20. Safety Check
Upon completion of any service or
repairs to this product, ask the
service technician to perform
safety checks to determine that
the product is in proper operating
condition.
21. Do not leave thermal-paper
documents or easily
deformed items on top of
the unit or near the air
exhaust for long periods of
time.
The heat from the unit could erase
the information on the thermal
paper, or cause deformation or
warping.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
English
POWER SUPPLY CORD SELECTION
If your line voltage is 220 to 240V, use one of the following types of cable.
Plug
Plug
configuration Plug type
Line voltage
220 – 240V
configuration Plug type
Line voltage
200 – 240V
Australian
240V
10A
EURO
UK
Switzerland 200 – 240V
220 – 240V
240V
6A
Use a 5A fuse which is approved by ASTA
or BSI to BSI362.
Always replace the fuse cover after
changing the fuse.
North American 200 – 240V
240V
15A
IMPORTANT PRECAUTIONS
Save Original Packing Materials
The original shipping carton and packing materials will come in handy if you ever have to
ship your projector. For maximum protection, repack the set as it was originally packed at
the factory.
Moisture Condensation
Never operate this unit immediately after moving it from a cold location to a warm location.
When the unit is exposed to such a change in temperature, moisture may condense on
the crucial internal parts. To prevent the unit from possible damage, do not use the unit for
at least 2 hours when there is an extreme or sudden change in temperature
.
Place and Manner of Installation
• Do not place in hot locations, such as near heating equipment. Doing so could cause
malfunction, and shorten the life of the projector.
• Avoid locations with oil or cigarette smoke. Doing so will dirty the optical parts,
shortening their lives, and darkening the screen.
• Do not use the product vertically in any upright position or slantwise in an angle of 20
degrees or more.
• Using this instrument near a TV or radio may cause interference to the images or audio
sound. If this happens, move it away from the TV or radio.
• Moving the projector from a low-temperature room to a high-temperature room may
cause condensation on the lens or internal parts in the instrument. If you continue to use
it in that situation, the malfunction may result. Ensure to wait until the condensation
naturally disappears.
• In a high altitude location where air is thin, cooling efficiency is reduced so use it with the
ambient temperature being lowered.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT PRECAUTIONS (Continued)
Avoid Volatile Liquid
Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or
plastic products touching the unit for a long time. They will leave marks on the finish.
If cleaning with a chemically saturated cloth, be sure to follow the product's precautions.
In the spaces provided below, record the Model and Serial No. located at the bottom of your
projector.
Model No.
Serial No.
Retain this information for future reference.
EXEMPTION CLAUSES
• Toshiba Corporation bears no responsibility in the case of damages arising from natural
disaster such as earthquakes, lightning, etc., fire not liable to Toshiba Corporation,
operation, theft or mischief by third parties, other accidents, or use under abnormal
conditions including erroneous or improper operation and other problems.
• Toshiba Corporation bears no responsibility for incidental damages (lost profit, work
interruption, corruption or loss of the memory contents, etc.) arising from the use of or the
inability to use this unit.
• Toshiba Corporation accepts no liability whatsoever for any damages arising from not
having followed the descriptions in this Instruction Manual.
• Toshiba Corporation accepts no liability whatsoever for any damages arising from
malfunctions arising from combination with equipment or software that is not related to
Toshiba Corporation.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
English
OTHER CAUTIONS AND INFORMATIONS
Copyrights
Showing or transmitting commercial imaging software or broadcast or cable-broad
casting programs with the purpose of other than the personal and private viewing,
including modifying images using the freeze or resize functions, or displaying with the
varying aspect ratio of the images, could violate the direct or indirect copyrights of the
imaging software or broadcast program, etc., if done without first consulting with the
copyright holder. For this reason, please take appropriate measures before performing
one of the actions listed above, including obtaining a license from the copyright holder.
Disposal
This product contains substances which are harmful to humans and the environment.
• Solder used in the internal parts contains the lead.
• The lamp contains inorganic mercury.
Please dispose of this product or used lamps in accordance with local regulations.
Trademarks
• VGA, SVGA, XGA, SXGA, UXGA are trademarks or registered trademarks of
International Business Machines Corporation.
• Digital Light Processing, Digital Micromirror Device and DMD are trademakes of Texas
Instruments.
• Macintosh is a registered trademark of Apple Computer, Inc.
• Windows is a registered trademark of Microsoft Corporation in the U.S. and other countries.
• Adobe is a registered trademark and Acrobat Reader is a trademark of Adobe Systems
Incorporated.
Notational Conventions Used in This Manual
• References to pages with related information are annotated as follows.
p.36
For example, if making a reference to page 36:
• The illustrations in this document are for reference purposes only and may not reflect
your package exactly.
REMOTE CONTROL BATTERIES
Caution
• Never throw batteries into a fire.
Notes
• Be sure to use AA batteries.
• Dispose of batteries in a designated disposal area.
• Attention should be drawn to the environmental aspects of battery disposal.
• Do not mix different battery types or combine used batteries with new ones.
• If the remote control does not operate correctly, or if the operating range becomes
reduced, replace both batteries with new ones.
• If the batteries are dead or if you will not be using the remote control for a long time,
remove the batteries to prevent battery acid from leaking into the battery compartment.
Using the batteries improperly may cause them to explode or leak and lead to burn or injury. If
battery-leaking fluid contacts skin, wash the fluid off immediately with clean water and consult a
doctor. If the fluid is spilt on an instrument, avoid contact and wipe it off using tissue paper.
(Dispose of the used tissue paper as flammable garbage after moistening with water.)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Before Using
SAFETY PRECAUTIONS ..................................................................................
IMPORTANT SAFETY INSTRUCTIONS ...........................................................
POWER SUPPLY CORD SELECTION..............................................................
IMPORTANT PRECAUTIONS ...........................................................................
2
4
9
9
EXEMPTION CLAUSES .................................................................................... 10
OTHER CAUTIONS AND INFORMATIONS ...................................................... 11
REMOTE CONTROL BATTERIES .................................................................... 11
CONTENTS ....................................................................................................... 12
Preparations
Checking the package contents ......................................................................... 14
Names of each part on the main unit................................................................. 15
Names of each part on the control panel and remote control ............................ 16
Parts on the rear panel ...................................................................................... 17
Preparing and using the remote control............................................................. 18
Placement .......................................................................................................... 19
Connection......................................................................................................... 20
Operations
Turning the power on and off ............................................................................. 21
Basic operations ................................................................................................ 23
Using handy features ......................................................................................... 25
Using auto setting........................................................................................... 25
Cutting off the picture temporarily (Mute) ....................................................... 27
Freezing the image (Freeze) .......................................................................... 27
Using the menus ................................................................................................ 28
How to use the menus .................................................................................... 28
The image adjustment menu .......................................................................... 29
The display setting menu................................................................................ 30
The default setting menu ................................................................................ 31
Displaying Information (Status display) .......................................................... 32
Maintenance
About lamp......................................................................................................... 33
Lamp replacement ............................................................................................. 33
Lens and main unit cleaning .............................................................................. 35
12
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Others
Trouble indications ............................................................................................. 36
Before calling service personnel ........................................................................ 37
Specifications..................................................................................................... 38
List of general specifications .......................................................................... 38
Separately sold product.................................................................................. 38
List of supported signals (RGB signals) ......................................................... 39
List of supported signals (DVI signals) ........................................................... 40
List of supported signals (Y/PB/PR signals) .................................................... 41
List of supported signals (Video, S-Video signals) ......................................... 41
Pin assignment of COMPUTER terminal ....................................................... 41
Pin arrangement for the DVI-D terminal ......................................................... 42
CONTROL terminal ........................................................................................ 43
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparations
Checking the package contents
Please make sure that the following items are included in the box, along with the main unit. If
any item is missing, please contact the store immediately where you purchased the product.
(1)
(4)
(5)
(6)
(2)
(3)
■ (1) Remote control
■ (2) R6 (SIZE AA) batteries for remote control (2)
■ (3) Owner’s Manual
■ (4) Video cable
■ (5) S-Video cable
■ (6) Power cord (See note)
Note
The shape and number of supplied power cords vary depending on the product destination.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Names of each part on the main unit
(6)
(5)
(4)
(3)
(1)
(2)
(7)
(11) (12)
(8)
Back
(9)
(10)(8)
Front
Name
: Function
p.24
(1) Foot adjuster release button : Press to stow the foot adjuster.
p.18
(2) Infrared remote sensor
(3) Lens
: Senses commands from the remote control.
: Projects expanded image.
(4) Air intake
: Draws in air from outside the projector.
p.16
(5) Control panel
(6) Zooming lever
(7) Air exhaust
(8) Tilt adjuster
(9) Rear panel
: Operates the projector.
p.24
: Adjusts screen size.
: Expels air that has grown hot inside the projector.
p.24
: Adjusts the projector’s horizontal tilt.
p.17
: Connects external devices.
p.24
(
(
(
10) Focusing lever
11) Foot adjuster
12) Lamp cover
: Adjusts screen focus.
p.24
: Adjusts the vertical projection angle.
p.34
: Remove to replace lamp.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Names of each part on the control panel and remote control
Control panel
Remote Control
Remote control
transmitter
(9) (10) (11)
(4)
(2)
(12)
(3)
(6)
(1)
(2)
(8)
(13)
(1)
(8)
(7)
(6)
(3)
(4)
(7)
(5)
Name
: Main Function
(1) ENTER button
(2) MENU button
(3) SET UP button
(4) ON/STANDBY button
(5) ON indicator
: Accepts the selected mode.
p.28
: Displays menus.
p.25
: Sets up image and mode.
p.21
: Turns the power on/off (standby).
: Displays whether power is on or off.
p.21
p.23
(6) INPUT button
(7) RETURN button
(8) Selection button
(9) LAMP indicator
: Selects input.
: Goes back one screen.
: Menu selections and adjustments,etc.
: Displays lamp mode.
p.29
p.22
p.36
(
(
(
(
10) TEMP indicator
11) FAN indicator
12) FREEZE button
13) MUTE button
: Lights when internal temperature too high.
p.36
: Displays cooling fan mode.
p.27
: Pauses image.
p.27
: Cuts off the picture temporarily.
Note
• For the remainder of this manual, buttons are referred to as follows:
Selection buttons ⇒
; ENTER button ⇒
16
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Parts on the rear panel
(7)
(2)
(3) (4)
(5)
(6)
(1)
(10)
(9) (8)
Name
: Main Function
: Senses commands from the remote control.
: When operating the projector via a computer, connect
p.18
(1) Infrared remote sensor
(2) CONTROL terminal
p.43
this to the controlling computer’s RS-232C port.
(3) S-VIDEO terminal
(4) VIDEO terminal
(5) Component video terminal
: Input S video signals from video equipment.
: Input video signals from video equipment.
: Input component video signal (Y/PB/PR) from a video
equipment or other source.
(6) COMPUTER terminal
(7) DVI-D terminal
: Input RGB signal from a computer or other source.
: Input digital RGB signal from a computer or other
source.
(8) Main power switch
(9) AC IN socket
: AC power line ON (standby)/OFF.
: Connect the supplied power cord here.
: Attach a safety cable or any other antitheft device.
(
10) Antitheft lock hole
Notes
• Although this owner’s manual abbreviates component video signals as Y/PB/PR, the
product also supports signals from video equipment marked “Y/CB/CR.”
• Input signal specifications for the DVI terminal complies with the DVI 1.0 Specifications.
• Please note that the operations for the functions not covered in these specifications are
not guaranteed. Because this is an evolving technology, it is possible that some devices
may not operate properly with the projector.
• This supports HDCP (High-bandwidth Digital Content Protection).
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing and using the remote control
■ Loading dry-cell batteries
into the remote control
■ Operating the remote
control
q Remove the battery cover.
Point the remote control toward the
projector’s infrared remote sensor,
and press a button on the remote
control.
• Operating the projector from the front
w Insert the dry-cell batteries.
Be sure to align the plus and minus
ends of the batteries properly.
Approx. 15°
Approx. 5m
• Operating the projector from the rear
Two batteries (R6, SIZE AA) are used.
e Replace the battery cover.
Approx. 15°
Approx. 5m
Dry-cell batteries
• Before using the batteries, be sure to observe the Safety Precautions described in
previous pages.
• Remove batteries from remote control when not using for extended periods.
• If the remote control stops working, or if its range decreases, replace all the batteries with
new ones.
The remote control
• The remote control may fail to operate if the infrared remote sensor is exposed to bright
sunlight or fluorescent lighting.
• Do not drop or bang.
• Do not leave in hot or humid locations.
• Do not get wet or place on top of wet objects.
• Do not take apart.
• In rare cases, ambient conditions could impede the operation of the remote control. If this
happens, point the remote control at the main unit again, and repeat the operation.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Placement
Placement Styles
As shown in the figures below, this device can be placed in 4 different styles.
The factory setting is “floor-mounted front projection.” Set the Projection mode in the
p.31
default setting menu
, in accordance with your needs.
Floor-mounted front projection
Floor-mounted rear projection
Ceiling-mounted front projection
Ceiling-mounted rear projection
WARNING
• Always obey the instructions listed in IMPORTANT SAFETY INSTRUCTIONS when placing the unit.
Attempting to clean/replace the lamp at a high site by yourself may cause you to drop down, thus
resulting in injury.
• If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so. Mounting the
projector on a ceiling requires special ceiling brackets (sold separately) and specialized knowledge.
Improper mounting could cause the projector to fall, resulting in an accident.
• If the projector is ceiling-mounted, install the breaker for turning off the power in case of anomaly. Let
everyone involved with the use of the projector know that fact.
Projection Distance and Size
Use the figures, tables, and formulas below to determine the projection size and projection distance.
(Projection sizes are approximate values for full-size picture with no keystone adjustment.)
Screen
As seen from above
a (min length) = projection size (inches) × 0.0414
°
90
a (max length) = projection size (inches) × 0.0498
projection distance a (m)
projection
size (cm)
height (H)
(cm)
min length
max length
As seen from the side
(zooming max) (zooming min)
Lens center
24.1 (61)
40 (102)
60 (152)
80 (203)
100 (254)
150 (381)
200 (508)
290 (736)
—
1.20
1.99
2.99
3.98
4.98
7.47
9.96
—
16
27
40
53
67
100
134.4
195
1.66
2.48
3.31
4.14
6.21
8.28
12.00
H
°
90
a
a is the distance (m) between the lens and the
screen, and corresponds to a range of 1.20 m to
12.00 m. H is the height from the image bottom to
the center of the lens.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
Before connection
• Read the owner’s manual of the device you are connecting to the projector.
• Some types of computer cannot be used or connected to this projector.
p.39
Check for an RGB output terminal, supported signal
• Turn off the power of both devices before connecting.
, etc.
• The figure below is a sample connection. This does not mean that all of these devices
can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)
Computer (for control)
Video recorder,
DVD player, etc.
VCR, etc
To S-Video
output
To video
output
To RS-232C
terminal
p.43
S-Video cable
(supplied)
Control cable
Video cable (supplied)
DVI cable
(not supplied)
RGB component video cable
(not supplied)
To Y/CB/CR output
RGB cable
(not supplied)
Green (Y)/Blue (CB)/Red (CR)
To DVI output
DVD video recorder, etc.
To RGB output
Computer
Computer
Notes
• If you want to feed the digital RGB signal, separately available DVI cable is needed.
• If you are using the digital RGB signal for input to this unit, some computer models or a
certain type of DVI cable may cause on rare occasions noise on the screen. If such is a
case, decrease your computer’s refresh rate or the resolution. It is also recommended to
use a DVI cable in 2 m or less in length.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
English
■ Connecting the power cord
Insert the power cord connector into the
AC IN socket of the projector.
1
Insert the power cord plug into a wall or
other power outlet.
2
Power cord connector
(Supplied)
■ Removing the lens cover
Be sure to remove the lens cover when the power is
turned on. If it is left on, it could become deformed due
to heat.
■ Turning the power on
1
Turn on the main power switch
The ON indicator will change to
orange, indicating standby mode.
• After the main power switch is turned
on, the inner cooling fan starts
cooling.
(Orange)
Remote
Control
2
Press the ON/STANDBY
button.
Start-up screen
Control panel
The power turns on, and the following
3 green indicators light: ON, LAMP,
and FAN. After a moment, the start-up
screen appears.
CAUTION
• Do not look into the lens while the lamp is on. The strong light from the lamp may cause
damage to your eyes or sight.
• Do not block the air intake or exhaust. Doing so could cause a fire due to internal overheating.
• Do not place your hands, face, or other objects near the air exhaust. Doing so could cause
burns, deform/break the object.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the power on and off (Continued)
Notes
• The start-up screen will disappear after a moment.You can dismiss the start-up screen
before this by performing any operation.You can also configure the start-up screen not to
p.30
appear via the Display setting menu
.
• The first time you use the projector after purchase, after the start-up screen disappears,
p.23
the Language menu is displayed
.
■ Turning the power off
1
Press the ON/STANDBY button.
A message appears on the screen, confirming that you wish to shut off the power. This
message will disappear after a moment. (This operation is no longer valid after the
message disappears.)
Press the ON/STANDBY button again.
2
The screen turns off, but the internal cooling fan continues to operate for a short while.
Then, the projector goes into standby mode.
When cooling lamp
During internal cooling
After cooling complete
(Green)
Flashing
(Green)
(Off)
(Green)
(Off)
(Off)
(Orange)
(Orange)
(Orange)
A
B
C
During cooling, the LAMP indicator flashes. In this state, the power cannot be
turned back on.
A
B
After the LAMP indicator goes off, the cooling fan continues to operate for a
short while, in order to expel excess internal heat. If you are in a hurry, there is
no problem with unplugging the power cord or turning off the main power switch
in this state.
In standby mode
C
Note
• The projector consumes about 12W of power in standby. We recommend that you unplug
the power cord or turn off the main power switch if you will not be using the projector for
an extended period.
PRECAUTION
• If the power cord is unplugged before cooling is complete, give the lamp time (about 5
minutes) to cool before plugging it back in. If the lamp overheats, it may fail to light, and
its lifetime will be shortened.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Basic operations
Turn on the power.
Turn on the power by following the instructions in “Turning the power on”
1
p.21
.
2
Select the language and the lamp power (When using the
first time).
When the projector is used for the first time after purchase, menu for language and
lamp power selection and configuration is displayed in English. (If the screen is out of
focus, adjust it according to the step .)
6
English
French
German
q Use the
or
button to select the
button.
desired language and press the
Message for setup confirmation is displayed in a
selected language.
Then, the menu for lamp power selection and
configuration is displayed. It is automatically set as
Standard. To change the setting, follow the step w.
Italian
Spanish
Portuguese
Russian
Swedish
Turkish
Japanese
Chinese (simplified)
Chinese (traditional)
Korean
w Using the
or
button, select the lamp
button.
power and press the
The lamp power, if selected, will be toggled without
pressing the button. The display automatically
disappears in a few seconds.
Notes
• When the projector is turned on the next time, the Language and Lamp power
menus do not appear upon startup. However, if “Reset all” is executed from the
p.31
Default setting menu
, the Language and Lamp power menus will be
displayed the next time when the power is turned on.
p.30
• The language can also be set via the Display setting menu
and Lamp power
p.31
via the Default setting menu
.
• This owner’s manual assumes that English has been selected.
Activate the connected device.
Turn on and start the connected device such as a computer.
3
4
Press the INPUT button.
An image of the connected equipment is projected.
Each time you press the INPUT button, it switches to the input of the connected
equipment.
Notes
p.31
• When [Auto input search] is set to [On] in the default setting menu
, the image of
the equipment which is connected and turned on is projected.
• Moving pictures generated with the DVD software for computers may appear unnatural if
it is projected with this projector, but it is not a malfunction.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations (Continued)
5
Projector placement angle adjustments
The placement angle and the height of the projected image can be adjusted by the foot
adjuster.
q Lift up the front of the projector to
1
the desired angle, then press the
foot adjuster release button.
The foot adjuster extends. Release the
button to lock the position.
w To adjust the horizontal angle, use
the tilt adjuster.
To stow the foot adjuster, hold up the projector
while pressing the foot adjuster release button,
then slowly lower the projector.
2
Adjusting the screen size and focus
6
q
Use the zooming lever to adjust the screen size.
1
2
w Use the focusing lever to adjust the focus.
Readjusting the projection size with the
zooming lever after focusing will cause the
projected image to be out of focus. In that case,
perform focusing again.
Notes
• Note that a lamp characteristics may rarely cause the brightness to fluctuate slightly.
• A lamp is consumable item. If used for extended periods, images will appear dark, and
the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The
lifetime of the lamp depends on conditions of use.)
• The DMDTM is made using extremely advanced technology, but there may be black spots
(pixels that do not light) or bright spots (pixels that are constantly lit) on the panel. Please
note that these are not malfunctions.
p.39
• Although this projector supports a wide range of RGB signals
be expanded or shrunk, which will affect image quality slightly.
, any resolutions will
• With some models of computer having LCD displays or the like, displaying images
simultaneously on the projector and the monitor’s display may prevent the images from
displaying properly. If this happens, turn off the computer’s LCD display. For information
on how to turn off the LCD display, see the owner’s manual of your computer.
• If a signal not supported by the projector is input, the “Unsupported signal” will appear.
• If no signal is being input from the connected device, the “No signal” will appear.
• If an unavailable operation button is pressed, the
icon will appear.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Using handy features
■ Using auto setting
Remote
This function sets up the projector to the optimum state for
each type of the input signal by using simple operations.
Control panel
Control
1
Press the SET UP button.
The Set up menu appears.
2
Press the SET UP button again.
The displayed menu item is automatically adjusted/set.
For computer input, the
processing.
For manual adjustment and setting, see the following table
icon will appear during
p.26
.
Notes
• The image may not be projected or auto adjustment/setting may not be performed
p.39 p.40
correctly for input signals other than those supported by the projector
,
,
p.41
.
• Keystone adjustment cannot be corrected automatically.
●Correcting the keystone distortion
p.24
When the foot adjuster
is used to change the projector placement angle while
projecting the image, the picture will undergo keystone (trapezoidal) distortion.
This projector is capable of correcting this keystone distortion
.
Before correction After correction
● Manual adjustment
Press the SET UP button to display the Set up menu and select [Keystone]. Use
the buttons for keystone adjustment. When the adjustment is finished, press
the RETURN button.The menu disappears.
Notes
• Depending on the amount of keystone adjustment and the content of images, some
information may be lost, or the picture quality may suffer.
• Keystone adjustment is available for the keystone distortion in a slant angle of ±15
degrees.
• Keystone adjustment will not change the shape of the menus, the start-up screen,
and the background (with no signal input).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using handy features (Continued)
● Manual adjustments and settings
The menu items of the Set up menu vary depending on the input type, as shown in
the table below.
Use the
buttons to adjust the items in the table below, then press
the RETURN button when you are finished.
Video
S-video
Select Item
Keystone
Description
Computer Y/PB/PR
DVI
Yes
Correct the keystone (trapezoid) distortion of the
screen.
Yes
Yes
Yes
No
Yes
Screen shrinking
downward
Screen shrinking
upward
Auto setting Automatically adjusts items such as the sampling
phase depending on the type of input signal.
Press the SET UP button.
No
No
Phase
Adjust with
to eliminate flicker.
Yes
Yes
No
No
No
No
No
No
Frequency Adjust with
to eliminate periodic patterns
and flickering when many vertical lines appear
on the screen.
Image’s
Adjust the horizontal position of the image.
Yes
No
No
No
H-position Move left
Image’s Adjust the vertical position of the image.
V-position Move down Move up
Adjusts the clamp pulse position.
Lower Higher
Adjusts the clamp pulse width.
Narrower Wider
Move right
Yes
Yes
No
No
No
No
No
No
Clamp 1
Clamp 2
Yes
No
No
No
26
Download from Www.Somanuals.com. All Manuals Search And Download.
English
■ Cutting off the picture temporarily (Mute)
Remote
Control
When you want to project the images of another projector, overhead
projector, etc. temporarily, this projector’s images can be turned off.
Press the remote control’s MUTE button.
The picture is cut off. (The Mute function is released when pressing
the MUTE button again.)
Notes
• The
icon will appear while mute is in effect.
• Operating any other functions will also cancel the muting.
■ Freezing the image (Freeze)
Remote
Control
The image being projected can be frozen. This function is to be used to
pause a video during a presentation, etc.
Press the remote control’s FREEZE button.
The picture pauses. (The Freeze function is released when pressing
the FREEZE button again.)
Notes
• The
icon will appear while freeze is in effect.
• Other operation will also release the freeze.
• Even if an image is frozen on the projector, the pictures are running on the video or
other equipment.
• If you use this function on video software sold on the market, broadcast or
broadcast on cable except for the purpose of your private viewing and listening, it
may infringe the copyright protected by the copyright laws.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menus
You can call up on-screen menus, and conduct a number of adjustments and settings using
p.16
the operation buttons
on the control panel (main unit side) and remote control.
■ How to use the menus
The menu shown below is for operation instructions purposes and might differ from the
actual display.
Display the Setting display menu
1. Press the MENU button
2. Select a Category
Select a category by using
.
Displays the current
adjustments and settings of
selected category.
There are following four
categories:
Item shown with gray cannot
be adjusted with the current
input source.
p.29
Image adjustment menu
p.30
p.31
p.32
Display setting menu
Default setting menu
Status display menu
3. Adjustments & Settings
Press
to open the menu.
Item
Adjustment/Setting Value
5. End
Press the MENU
button
The menu disappears.
These marks signify the
items can be adjusted/set
This mark signfy that
there are options.
by using
.
Press
to display a
list of options.
These marks signify the items can
be selected from the list by using
.
After an item is selected, apply it
by pressing
.
The figure shows displays given for operation instructions purposes. As the display
may differ depending on the item, use the following pages as a reference.
4. Back
Return button
Note
• Menu adjustments and settings are saved when the power is turned off via the ON/
STANDBY button. If the power cable is disconnected before this, or the power goes out,
then the data will not be saved.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
English
■ The image adjustment menu
Use this menu to adjust image-related items.
Items that can be adjusted are marked with “Yes”, and those that cannot are marked with “No”.
Video
S-video
Item
Contrast
Description
Computer Y/PB/PR
DVI
Adjust the image contrast.
Yes
Yes
No
No
No
Yes
Yes
Yes
No
Yes
Yes
Lower
Brightness Adjust the brightness of the image.
Darker Brighter
Adjust the color of the image.
Lighter Deeper
Adjust the tint of the image color.
Reddish Greenish
Sharpness Adjust the sharpness of the image.
Softer Sharper
Set the function to reduce screen noise. No
On (Enable) Off (Disable)
Press . Toggle the picture mode with
Higher
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
Yes
Color
Tint *1
Yes
Yes
Yes
Noise
reduction
Picture
mode
Yes
/
.
Dynamic/Standard/Theater
R-level
G-level
B-level
Adjust red of the image color.
Yes
Yes
Yes
No
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Less red
Adjust green of the image color.
Less green More green
Adjust blue of the image color.
Less blue More blue
NTSC mode*1 Set the black level with
US: NTSC (US) mode
Japan: NTSC (JAPAN) mode
More red
/
button.
*1: [Tint] and [NTSC mode] can be displayed and adjusted only when the video signal is set to
[NTSC] and [NTSC4.43]. (NTSC mode is set to JAPAN when the language is set to Japanese. It is
set to US for other languages.)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menu (Continued)
■ The display setting menu
Use this menu to set screen display-related items.
Description
Zoom
Item
Screen size
Full
4:3
Full : This mode is best for squeeze-signal video images.
4:3 : This mode is best for 4:3-signal video images on the 4:3-size screen.
Zoom : This mode is best for video images of letter-box or cinema signals.
Language
Select one of the languages below to use for displaying the menu and messages
[
: Enter setting mode]
English/Français/Deutsch/Italiano/Español/Português/
Svenska/Türkçe/
[
:Selection]
[Apply:
]
/
/
/
/
Background
Icon
Screen to display when there is no input signal
(Logo) (Blue)
(Black)
On
Display icons as function guides
Off
Off
Start-up screen Display start-up screen when power is turned on On
●Screen size
The screen size of this unit is 16:9, but the screen size can be changed according to
the input signal.
Note
• Using these functions to change the picture size (i.e., changing the height/width
ratio) for any purpose other than your private viewing may be prohibited under the
Copyright Laws of the United States and other countries, and may subject you to
civil and criminal liability.
Projection screen
4:3 signal
Input signal
4:3 signal
Full
Zoom
Squeeze signal
Letter box signal
Cinema signal
Full (O)
Full
4:3
4:3
4:3
Zoom
Zoom (O)
Zoom (O)
Full
(O): Optimum screen size
Notes
•
The screen size cannot be changed when the 16:9 signal is input.
• You cannot select “Zoom” when the input is COMPUTER or DVI.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
English
■ The default setting menu
This menu shows placement status and other settings.
Description
Item
p.19
Sets projection mode in accordance with Placement Style.
Projection
mode
(Mounted
(Rear mounted
from ceiling)
(Standard)
(Rear)
from ceiling)
No signal
power off
Set the timer to wait for the power to be turned off after signal input stops.
Press . Switch with and
.
Off (not turned off)/1 min./5 min./10 min./30 min./60 min.
Auto input
search
Set whether the input with signals is only selected or not.
On
Off
Power on
Sets whether to turn on the power when the ON/STANDBY button is pressed
(Manual), or when the power cord is plugged in (Auto). Manual
Auto
Standard
High
Lamp power [Note 1]
Fan mode [Note 2]
Reset all
Sets the lamp power.
Low
Standard
Sets the cooling fan speed.
Press
.
Yes
No
Resets all adjustments and settings to their factory settings.
Notes
1: When Lamp power is set to Low, the screen becomes a little darker, but the cooling fan noise gets
quieter. This setting will be cleared when you turn the power off.
2: Setting [Fan mode] to [High] increases the cooling fan speed. Set this option to use the projector,
for example, at high altitude (over 1,500 meters above sea level).
Notes
•
Note that in the event of a power outage but the power is restored afterwards, the projector
power will come on if Power on is set to Auto, and the power cord is plugged in.
• When you turn off the projector even if Power on is set to Auto, you must press the ON/
STANDBY button to turn the power off.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the menu (Continued)
■ Displaying Information (Status display)
This displays information about the input signal, lamp use time, etc.
“Yes”: displayed, “No”: not displayed
Video
S-video
Yes
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Item
Description
Computer Y/PB/PR
DVI
Input
Input source name
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
No
No
No
No
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Mode name
H-resolution
V-resolution
H-frequency
V-frequency
Sync
Signal format
Video mode
Lamp time
RGB input mode [Note 1]
Horizontal resolution (in dots)
Vertical resolution (in dots)
Horizontal sync frequency
Vertical sync frequency [Note 2]
Sync signal polarity [Note 3]
Y/PB/PR signal format
Color method of video signal
No
No
Time of lamp use [Note 4]
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Lamp reset count The count for lamp replacement Yes
Total time
Version
The total time that this projector is used Yes
Firmware version [Note 5]
Yes
Notes
1: The mode of supported RGB signals
2: Same as the refresh rate of the computer signal.
3: Sync signal polarity shown as P (positive) or N (negative) for [H/V].
p.39
is shown.
4: Displays [Lamp time] as a measure of when the lamp should be replaced. (Cannot be used as
a counter of guaranteed lamp time.) When the displayed time approaches 2,000 hours, consult
with a store about getting a TLPLMT20 replacement lamp (sold separately) prepared.
5: [Version] shows the version of the projector’s internal control program. This version is referred
to for customer service, etc.
Note
• The displayed information will not be refreshed if the status changes. To refresh the
information, dismiss the display, then display it again.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Maintenance
About lamp
The product’s light source is a mercury lamp that lights at increased internal pressure. Be sure
to fully understand the following characteristics of the lamp and handle it with extreme care.
• The lamp may explode with a loud noise due to impact or deterioration, or fail to light at
the expiration of its life.
• How long it takes before the lamp explodes or the life expires may vary greatly by lamp.
Some may explode shortly after first use. (Free replacement is available if the lamp
explodes within the warranty period. Contact the dealer from whom you purchased the
product in such a case.)
•
Lamp rupture is more likely to happen if the lamp is used after the recommended
replacement period has elapsed.
• When the lamp explodes, the broken pieces of glass may get inside the product or be
released outside from the openings for ventilation.
• When the lamp explodes, a slight amount of mercury gas enclosed in the lamp along
with glass dust may be released from the openings for ventilation.
■
Immediately replace the lamp when a sign appears on the screen.
• When the replacement time approaches, a message will appear on the screen.
•
The risk of explosion will increase if the lamp is continuously used without being replaced.
• Frequently check the used hours and prepare spares when the replacement time
p.32
approaches. (Refer to “Status display”.
)
■
When the lamp is broken
• If glass components, including a lamp and a lens, should break, handle the broken
pieces with care to avoid injury and contact your dealer for repair service.
• In the event of lamp explosion, unplug the product from the wall outlet, leave and
completely ventilate the room. Then, thoroughly clean the area around the projector and
discard any edible items placed in that area.
Lamp replacement
A lamp is consumable supplies. If used for extended periods, images will appear dark, and
the lamp could burn out. This is characteristic of a lamp, and is not malfunction. (The lifetime
of the lamp depends on condition of use.) If this happens, replace it with a new one
.
WARNING
•
If the projector is mounted on a ceiling, request a lamp replacement from your projector dealership.
• When replacing, always use lamp “TLPLMT20” (sold separately).
CAUTION
•
•
If you have been using the projector, the lamp will be very hot, and may cause burn injuries
Wait for the lamp to cool (for longer than 1 hour) before replacing it.
If the lamp should break, please handle with care to avoid injury due to broken pieces and
contact your dealer for repair service.
.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Lamp replacement (Continued)
Unplug power cord.
1
2
Wait until lamp is sufficiently cooled.
Wait for at least 1 hour.
3
Remove the lamp cover.
3
Lamp cover
1
Loosen the 1 screw, then pull up to the direc-
tion of the arrow with your fingers as shown to
remove the lamp cover. Use care to avoid any
damage to nails and/or tip of your finger(s). If
you have any difficulty in removal, you can use
a screwdriver or any other smaller tool for your
convenience.
2
Pull out the lamp.
Loosen the 2 screws holding the lamp in place,
and pull up the handle to remove the lamp.
4
5
1
4
5
2
Mount the new lamp.
Align the orientation, press down until the bottom is
reached, and lock in place using the two lamp
locking screws.
2
Replace the lamp cover.
Align the cover, and press it in, then tighten the
6
7
1
3
screws loosened in step
no longer loose.
until the lamp cover is
Reset the lamp timer.
See the lamp’s manual for instructions on resetting
the lamp timer.
Notes and Precautions
• Press the
button twice to display (a rough guide) the time of lamp use, the Lamp time
p.32
item, in the Status display menu.
• It is recommended that the lamp be replaced after 2,000 hours of use. When Lamp time
reaches 2,000 hours, the icon and a message will appear. This display disappears
when you press button.
• Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, the
p.36
lamp may fail to come on
, and the lamp’s lifetime may be shortened.
• Always replace the lamp with a new one.
• The lamp is made out of glass. Do not touch the glass surface with your bare hands,
bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Used Lamps
This projector’s lamps contain trace amounts of environmentally harmful inorganic
mercury. Be careful not to break used lamps, and dispose of them in accordance with
local regulations.
Lens and main unit cleaning
WARNING
•
Request cleaning and maintenance of a ceiling-mounted unit from your projector dealership
Attempting to clean/replace the lamp at a high site by yourself may cause you to fall
down, thus resulting in injury.
.
■ Lens cleaning
• Clean the lens with a commercially available blower and/or
lens cleaner.
• The lens is easily scratched, so do not rub it with hard objects,
or strike it.
■ Main unit cleaning
• Clean the main unit after unplugging the power cord.
• Wipe dirt off the main unit gently with a soft cloth.
• If the soiling is severe, dip the cloth in a neutral
detergent diluted in water, wring well, and gently wipe
off the dirt, then finish up by wiping with a dry cloth.
● Replacing cooling fans
To maintain the performance, it is recommended that cooling fans should be replaced
about every 2 to 3 years. Consult with your dealer for details.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Trouble indications
The indicator lights inform you of internal abnormalities.
No power
⇒ Problem with projector
• Unplug the power cord, and contact your dealer.
⇒ The lamp cover is not properly attached.
p.34
• Unplug the power cord, and reattach the lamp cover.
(Off)
Lamp went out during use, or won’t come on
⇒ Lamp temperature is high so that it is difficult to turn on, the lifetime of
the lamp has ended or the projector is malfunctioning.
(Red lit)
•
Unplug the power cord and wait for a short while, then turn the power back on.
• If a lamp burns out, replace it with a new one.
❈ After approx. one minute of abnormal display, the projector returns to
the standby state waiting for internal cool down.
(Red lit)
Power went out during use
⇒ Internal overheating, or the outside temperature is too high.
• Place the projector so that the air intake and exhaust are not blocked.
(Red lit or flashing)
Or (Orange lit)
(Green lit)
•
Unplug the power cord and wait for a short while, then turn the power back on.
❈ The icon will appear before the power goes out.
❈ After approx. one minute of abnormal display, the projector returns to
(Red lit)
the standby state waiting for internal cool down.
Power went out during use
⇒ Problem with internal cooling fan.
• Unplug the power cord, and contact your dealer.
(Red lit or flashing)
Or (Orange lit)
❈ The
icon will appear before the power goes out.
❈ After approx. one minute of abnormal display, the projector returns to
the standby state waiting for internal cool down.
(Red lit)
Power went out during use
⇒ Problem inside the projector.
(Green lit
or Off)
•
Unplug the power cord and wait for a short while, then turn the power back on.
• If the above action will not clear the problem, unplug the power cord,
and contact your dealer.
(Green lit
or Off)
(Green
flashing)
❈ After approx. one minute of abnormal display, the projector returns to
the standby state waiting for internal cool down.
(Red lit)
PRECAUTION
• Make sure to unplug the power cord if something goes wrong.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Before calling service personnel
If you think something is wrong, check the followings before contacting customer service.
p.36
Please see “Trouble indications”
as well.
If This Happens
Check
• Is the power cord plugged in? Is it connected to the projector?
• Is the lamp cover loose?
No power
p.34
p.36
• Is the ambient temperature high?
Power goes out
during use
p.36
• Is the air intake or air exhaust blocked?
p.23
• Is the projector turned on?
• Is the mute function on?
No picture
p.27
p.29
• Is the brightness setting minimized?
p.20
• Are the connections set up correctly?
• Are all the connected devices functioning properly?
p.39 p.40 p.41
• Is the input signal supported by the projector?
,
,
Picture not
displayed
correctly
• Is there something generating an abnormal video signal, for
instance the video tape?
p.35
• Is the lens dirty?
Picture blurred
Part of picture
out of focus
p.24
• Is the lens focus adjusted optimally?
• Is the projection distance within the projector’s supported range?
p.19
p.19
• Is the projector’s screen placement angle tilted too far?
p.26 p.29
• Are the sharpness or sampling phase adjustments off?
p.29
• Are the brightness or contrast adjustments off?
• Is the lamp nearing the end of its service life?
Image is dark
p.32
p.29
• Are the color, tint, R-level, G-level, or B-level adjustments off?
• Is the screen dirty?
• Is the lamp nearing the end of its service life?
Colors too light
Bad shading
p.32
• Are the remote control’s batteries drained?
Remote control
doesn’t work
p.18
• Are the batteries inserted into the remote control correctly?
• Is the remote control being used within the effective range?
• Are there any obstructions between the remote control and
projector?
p.18
• Are there any fluorescent or other bright lights shining at the
projector’s infrared remote sensor?
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
■ List of general specifications
Item
Specification
Consumption Power
Weight
300 W
2.8 kg
External Dimensions
(including protruding parts)
Cabinet material*
298 × 101.4 × 275.4 mm (W × H × D)
PC+ABS resin and ABS resin
Conditions for usage environment Temp: 5°C to 35°C; relative humidity: 30% to 70%
Display pixels
1 chip DMD™
Picture elements
Lens
409,920 pixels (854H × 480V)
Zoom lens
F=2.75-3.03 f=22.3-26.76 mm
Lamp
High-pressure mercury lamp
24-290 inches
1.20-12.00m
Mini D sub 15 pin Analog RGB
DVI connector Digital RGB
RCA Pin Jack, 1V(p-p), 75 Ω
RCA Pin Jack, 0.7V(p-p), 75 Ω
RCA Pin Jack, 0.7V(p-p), 75 Ω
RCA Pin Jack, 1 V (p-p), 75 Ω
Mini DIN 4 pin
Projection screen size
Projection distance
COMPUTER terminal
DVI-D terminal
Y terminal
PB/CB terminal
PR/CR terminal
VIDEO terminal
S-VIDEO terminal
CONTROL terminal
Mini DIN 8 pin (RS-232C)
Note
• This model complies with the above specifications.
• Designs and specifications are subject to change without notice.
• This model may not be compatible with features and/or specifications that may be added
in the future.
■ Separately sold product
Replacement Lamp
Model TLPLMT20
38
Download from Www.Somanuals.com. All Manuals Search And Download.
English
■ List of supported signals (RGB signals)
This projector supports the following RGB signals. Note, however, that depending on the
computer model, the screen may show flicker or streaking. Please adjust the projector if
this happens.
p.25 p.26
(Press the SET UP button, and adjust automatically or manually.
,
)
Refresh rate
(Hz)
H-frequency
Clock
(MHz)
Resolution
Mode
(kHz)
720 x 400
640 x 480
720x400_85
VGA_60
VGA_72
VGA_75
VGA_85
SVGA_56
SVGA_60
SVGA_72
SVGA_75
SVGA_85
MAC16"
85.039
59.940
72.809
75.000
85.008
56.250
60.317
72.188
75.000
85.061
74.550
60.004
70.069
75.029
84.997
74.700
75.000
60.000
85.002
60.020
75.025
85.024
60.012
37.927
31.469
37.861
37.500
43.269
35.156
37.879
48.077
46.875
53.674
49.725
48.363
56.476
60.023
68.667
60.134
67.500
60.000
85.938
63.981
79.976
91.146
63.973
35.500
25.175
31.500
31.500
36.000
36.000
40.000
50.000
49.500
56.250
57.283
65.000
75.000
78.750
94.500
79.857
108.000
108.000
148.500
108.000
135.000
157.500
118.094
800 x 600
832 x 624
1024 x 768
XGA_60
XGA_70
XGA_75
XGA_85
MAC19"
1152 x 864
1280 x 960
SXGA1_75
QuadVGA_60
QuadVGA_85
SXGA3_60
SXGA3_75
SXGA3_85
SXGA+
1280 x 1024
1400 x 1050
Note
• Signals which resolution exceeds the native resolution (854 × 480 pixels) will be
compressed. For this reason, some information may be lost, or image quality may be
affected.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (Continued)
■ List of supported signals (DVI signals)
This projector supports the following DVI signals. Note, however, that depending on the
computer model, the screen may show flicker or streaking. Please adjust the projector if
this happens.
Refresh rate
(Hz)
H-frequency
(kHz)
Clock
(MHz)
Resolution
640 x 480
Mode
59.940
72.809
60.317
72.188
74.550
60.004
70.069
75.029
75.000
60.000
60.020
31.469
37.861
37.879
48.077
49.725
48.363
56.476
60.023
67.500
60.000
63.981
25.175
31.500
40.000
50.000
57.283
65.000
75.000
78.750
108.000
108.000
108.000
VGA_60
VGA_72
SVGA_60
SVGA_72
MAC16"
XGA_60
XGA_70
XGA_75
800 x 600
832 x 624
1024 x 768
1152 x 864
1280 x 960
1280 x 1024
SXGA1_75
QuadVGA_60
SXGA3_60
Signal format
fh(kHz)
31.47
31.25
45.00
37.50
33.75
28.13
fv(Hz)
480p(525p)@60Hz
576p(625p)@50Hz
720p(750p)@60Hz
720p(750p)@50Hz
1080i(1125i)@60Hz
1080i(1125i)@50Hz
59.94
50.00
60.00
50.00
60.00
50.00
Note
• Signals which resolution exceeds the native resolution (854 × 480 pixels) will be
compressed. For this reason, some information may be lost, or image quality may be
affected.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
English
■ List of supported signals (Y/PB/PR signals)
Signal format
fh(kHz)
15.73
31.47
15.63
31.25
45.00
37.50
33.75
28.13
fv(Hz)
59.94
59.94
50.00
50.00
60.00
50.00
60.00
50.00
480i(525i)@60Hz
480p(525p)@60Hz
576i(625i)@50Hz
576p(625p)@50Hz
720p(750p)@60Hz
720p(750p)@50Hz
1080i(1125i)@60Hz
1080i(1125i)@50Hz
■ List of supported signals (Video, S-Video signals)
Video mode
NTSC
fh(kHz)
15.73
15.63
15.63
15.73
15.63
15.73
15.73
fv(Hz)
60
fsc(MHz)
3.58
PAL
50
4.43
SECAM
PAL-M
50
4.25 or 4.41
3.58
60
PAL-N
50
3.58
PAL-60
NTSC4.43
60
4.43
60
4.43
■ Pin assignment of COMPUTER terminal
5
1
Pin No.
Pin description
Video signal (R)
Video signal (G)
Video signal (B)
GND
1
2
3
4
10
15
6
5
GND
6
GND (R)
11
7
GND (G)
Mini D sub 15 Pin connector
8
GND (B)
9
N.C
Input Signal
• RGB input
RGB signals:
Horizontal sync signal: TTL level (Pos/neg polarity)
Vertical sync signal: TTL level (Pos/neg polarity)
10
11
12
13
14
15
GND
0.7V (p-p) 75 Ω
GND
N.C
Horizontal sync signal
Vertical sync signal
N.C
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (Continued)
■ Pin arrangement for the DVI-D terminal
D V I - D
1
8
24
16
9 17
DVI DIGITAL connector
Pin No.
Pin description
Pin No.
16
Pin description
Hot plug detection
1
2
T.M.D.S. data 2–
T.M.D.S. data 2+
17
T.M.D.S. data 0–
T.M.D.S. data 0+
T.M.D.S. data 0/5 shield
T.M.D.S. data 5–
T.M.D.S. data 5+
T.M.D.S. clock shield
T.M.D.S. clock+
3
T.M.D.S. data 2/4 shield
T.M.D.S. data 4–
18
4
19
5
T.M.D.S. data 4+
20
6
DDC clock
21
7
DDC data
22
8
Analog vertical sync signal
T.M.D.S. data 1–
23
9
24
T.M.D.S. clock–
10
11
12
13
14
15
T.M.D.S. data 1+
T.M.D.S. data 1/3 shield
T.M.D.S. data 3–
T.M.D.S. data 3+
+5V power supply
GND(+5V, H Sync & V Sync)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
English
■ CONTROL terminal
● Pin assignment
Pin No.
Signal Name
RXD
Description
1
2
3
4
5
6
7
8
Receiving data
Consent to send
Data set ready
Signal ground
Request to send
No connection
Sending data
7
CTS
DSR
GND
RTS
N.C
8
6
5
3
4
TXD
GND
2
1
Signal ground
Mini DIN 8 pin connector
● Interface format
1 Communication method RS-232C, 9600bps, No Parity, Data Length: 8 bits;
Stop Bit Length: 1 bit
2 Communication format
3 Data format
STX (02h) Command (3Byte) ETX (03h)
Only 1 command valid per communication.
For input commands, only ASCII-compliant all-uppercase
alphanumeric characters supported.
4 Replies
Acknowledge
ACK (06h) CR (0Dh) Data ... Normally ended
ACK (06h) ESC (1Bh)
NAK (15h)
... Aborted
No acknowledge
If commands are to be sent consecutively, wait for the response from the projector
before sending the next command.
● Main Commands
Item
Command
IN1
Item
Command
PON
Computer input select
DVI input select
Power on
Power off
Icon display on
IN2
PSD
Video input select
S-video input select
YPB/CBPR/CR input select
IN3
IN4
IN5
MO0
MO1
PAT
DON
Icon display off
Auto setting (RGB input)
Status display on
Status display off
DOF
Note
• Contact your dealer for control cable and other commands.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|