Toshiba Laptop 70Dt User Manual

User's Manual  
C70/C70t/C70D/C75/C75t/  
C75D/L70/L70t/L70D/L70Dt/  
S70/S70t/S70D/S70Dt  
Download from Www.Somanuals.com. All Manuals Search And Download.  
User's Manual  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1  
TOSHIBA Legal, Regulatory and  
Safety  
This chapter states the Legal, regulatory and safety information applicable  
to TOSHIBA computers.  
Copyright, Disclaimer and Trademarks  
Copyright  
© 2013 by TOSHIBA Corporation. All rights reserved. Under the copyright  
laws, this manual cannot be reproduced in any form without the prior  
written permission of TOSHIBA. No patent liability is assumed, with respect  
to the use of the information contained herein.  
First edition April 2013  
Copyright authority for music, movies, computer programs, databases and  
other intellectual property covered by copyright laws belongs to the author  
or to the copyright owner. Copyrighted material can be reproduced only for  
personal use or use within the home. Any other use beyond that stipulated  
above (including conversion to digital format, alteration, transfer of copied  
material and distribution on a network) without the permission of the  
copyright owner is a violation of copyright or author's rights and is subject  
to civil damages or criminal action. Please comply with copyright laws in  
making any reproduction from this manual.  
Disclaimer  
This manual has been validated and reviewed for accuracy. The  
instructions and descriptions it contains are accurate for your computer at  
the time of this manual’s production. However, succeeding computers and  
manuals are subject to change without notice. TOSHIBA assumes no  
liability for damages incurred directly or indirectly from errors, omissions or  
discrepancies between the computer and the manual.  
Trademarks  
Intel, Intel SpeedStep, Intel Core and Centrino are trademarks or registered  
trademarks of Intel Corporation.  
AMD, the AMD Arrow logo, PowerPlay, Vari-Bright and combinations  
thereof are trademarks of Advanced Micro Devices, Inc.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-1  
   
Windows, Microsoft and Windows logo are registered trademarks of  
Microsoft Corporation.  
The Bluetooth® word mark and logos are registered trademarks owned by  
Bluetooth SIG, Inc. and any use of such marks by Toshiba Corporation and  
its affiliates is under license.  
The terms HDMI and HDMI High-Definition Multimedia Interface, and the  
HDMI Logo are trademarks or registered trademarks of HDMI Licensing  
LLC.  
sMedio and sMedio TrueLink+ are trademarks or registered trademarks of  
sMedio, Inc.  
TouchPad is a trademark of Synaptics, Inc.  
Secure Digital and SD are trademarks of SD Card Association.  
MultiMediaCard and MMC are trademarks of MultiMediaCard Association.  
Blu-ray Disc™, Blu-ray™, BDXL™ and the logos are trademarks of the  
Blu-ray Disc Association.  
QUALCOMM is a trademark of Qualcomm Incorporated. ATHEROS is a  
trademark of Qualcomm Atheros, Inc.  
Realtek is a registered trademark of Realtek Semiconductor Corporation.  
DTS, the Symbol, & DTS and the Symbol together are registered  
trademarks and DTS Studio Sound is a trademark of DTS, Inc. © DTS, Inc.  
All Rights Reserved.  
All other product names and service names in this manual may be  
trademarks or registered trademarks of their respective companies.  
Regulatory Information  
FCC information  
FCC notice "Declaration of Conformity Information"  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to part 15 of the FCC rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance  
with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not  
occur in a particular installation. If this equipment does cause harmful  
interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-2  
 
Consult the dealer or an experienced radio/TV technician for help.  
Only peripherals complying with the FCC class B limits may be attached to  
this equipment. Operation with non-compliant peripherals or peripherals not  
recommended by TOSHIBA is likely to result in interference to radio and  
TV reception. Shielded cables must be used between the external devices  
and the computer’s External RGB monitor port, Universal Serial Bus (USB  
2.0 and 3.0) ports, HDMI port and microphone jack. Changes or  
modifications made to this equipment, not expressly approved by  
TOSHIBA or parties authorized by TOSHIBA could void the user’s authority  
to operate the equipment.  
FCC conditions  
This device complies with part 15 of the FCC Rules. Operation is subject to  
the following two conditions:  
1. This device may not cause harmful interference.  
2. This device must accept any interference received, including  
interference that may cause undesired operation.  
Contact  
Address:  
TOSHIBA America Information Systems, Inc.  
9740 Irvine Boulevard  
Irvine, California 92618-1697  
Telephone: (949) 583-3000  
This information is only applicable for the countries/regions where it is  
required.  
EU Declaration of Conformity  
This product is carrying the CE-Mark in  
accordance with the related European Directives.  
Responsible for CE-Marking is TOSHIBA EUROPE  
GMBH, Hammfelddamm 8, 41460 Neuss,  
Germany. The complete and official EU  
Declaration of Conformity can be found on  
TOSHIBA’s web site http://epps.toshiba-teg.com  
on the Internet.  
CE compliance  
This product is labeled with the CE Mark in accordance with the applicable  
European Directives, notably RoHS Directive 2011/65/EU, Radio  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-3  
Equipment and Telecommunications Terminal Directive 1999/5/EC,  
Ecodesign Directive 2009/125/EC (ErP) and the related implementing  
measures.  
This product and the original options are designed to observe the related  
EMC (Electromagnetic Compatibility) and safety standards. However,  
TOSHIBA cannot guarantee that this product still observes these EMC  
standards if options or cables not produced by TOSHIBA are connected or  
implemented. In this case the persons who have connected/implemented  
those options/cables have to provide assurance that the system (PC plus  
options/cables) still fulfils the required standards. To avoid general EMC  
problems, the following guidance should be noted:  
Only CE marked options should be connected/implemented  
Only best shielded cables should be connected  
Working environment  
This product was designed to fulfil the EMC (Electromagnetic Compatibility)  
requirements to be observed for so-called “Residential, commercial and  
light industry environments”. TOSHIBA do not approve the use of this  
product in working environments other than the above mentioned  
“Residential, commercial and light industry environments”.  
For example, the following environments are not approved:  
Industrial Environments (e.g. environments where a mains voltage of  
380 V three-phase is used)  
Medical Environments  
Automotive Environments  
Aircraft Environments  
Any consequences resulting from the use of this product in working  
environments that are not approved are not the responsibility of TOSHIBA.  
The consequences of the use of this product in non-approved working  
environments may be:  
Interference with other devices or machines in the near surrounding  
area.  
Malfunction of, or data loss from, this product caused by disturbances  
generated by other devices or machines in the near surrounding area.  
Therefore TOSHIBA strongly recommend that the electromagnetic  
compatibility of this product should be suitably tested in all non-approved  
working environments before use. In the case of automobiles or aircraft,  
the manufacturer or airline respectively should be asked for permission  
before use of this product.  
Furthermore, for general safety reasons, the use of this product in  
environments with explosive atmospheres is not permitted.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-4  
Canadian regulatory information (Canada only)  
This digital apparatus does not exceed the Class B limits for radio noise  
emissions from digital apparatus as set out in the Radio Interference  
Regulation of the Canadian Department of Communications.  
Note that Canadian Department of Communications (DOC) regulations  
provide, that changes or modifications not expressly approved by  
TOSHIBA Corporation could void your authority to operate this equipment.  
This Class B digital apparatus meets all requirements of the Canadian  
Interference-Causing Equipment Regulations.  
Cet appareil numérique de la class B respecte toutes les exgences du  
Règlement sur le matériel brouileur du Canada.  
Following information is only valid for EU-member  
States:  
Disposal of products  
The crossed out wheeled dust bin symbol indicates that  
products must be collected and disposed of separately  
from household waste. Integrated batteries and  
accumulators can be disposed of with the product. They  
will be separated at the recycling centres.  
The black bar indicates that the product was placed on the  
market after August 13, 2005.  
By participating in separate collection of products and  
batteries, you will help to assure the proper disposal of  
products and batteries and thus help to prevent potential  
negative consequences for the environment and human  
health.  
For more detailed information about the collection and  
recycling programmes available in your country, please  
visit our website (http://eu.computers.toshiba-europe.com)  
or contact your local city office or the shop where you  
purchased the product.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-5  
Disposal of batteries and/or accumulators  
The crossed out wheeled dust bin symbol indicates that  
batteries and/or accumulators must be collected and  
disposed of separately from household waste.  
If the battery or accumulator contains more than the  
specified values of lead (Pb), mercury (Hg), and/or  
cadmium (Cd) defined in the Battery Directive (2006/66/  
EC), then the chemical symbols for lead (Pb), mercury  
(Hg) and/or cadmium (Cd) will appear below the crossed  
out wheeled dust bin symbol.  
By participating in separate collection of batteries, you will  
help to assure the proper disposal of products and  
batteries and thus help to prevent potential negative  
consequences for the environment and human health.  
For more detailed information about the collection and  
recycling programmes available in your country, please  
visit our website (http://eu.computers.toshiba-europe.com)  
or contact your local city office or the shop where you  
purchased the product.  
These symbols may not stick depending on the country and region where  
you purchased.  
REACH - Compliance Statement  
The new European Union (EU) chemical regulation, REACH (Registration,  
Evaluation, Authorization and Restriction of Chemicals), entered into force  
on 1 June 2007. TOSHIBA will meet all REACH requirements and is  
committed to provide our customers with information about the chemical  
substances in our products according to REACH regulation.  
Please consult the following website www.toshiba-europe.com/computers/  
info/reach for information about the presence in our articles of substances  
included on the candidate list according to article 59(1) of Regulation (EC)  
No 1907/2006 („REACH“) in a concentration above 0.1 % weight by weight.  
Following information is only for Turkey:  
Compliant with EEE Regulations: TOSHIBA meets all requirements of  
Turkish regulation 26891 “Restriction of the use of certain hazardous  
substances in electrical and electronic equipment”.  
The number of possible pixel failures of your display is defined  
according to ISO 9241-307 standards. If the number of pixel failures is  
less than this standard, they will not be counted as defect or failure.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-6  
Battery is a consumption product, since the battery time depends on  
the usage of your computer. If the battery cannot be charged at all,  
then it is a defect or failure. The changes in battery time is not a defect  
or failure.  
Video Standard Notice  
THIS PRODUCT IS LICENSED UNDER THE AVC, THE VC-1 AND  
MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL  
AND NON-COMMERCIAL USE OF A CONSUMER FOR (I) ENCODING  
VIDEO IN COMPLIANCE WITH THE ABOVE STANDARDS ("VIDEO")  
AND/OR (II) DECODING AVC, VC-1 AND MPEG-4 VIDEO THAT WAS  
ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND  
NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A  
VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE SUCH  
VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY  
OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT  
RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES  
AND LICENSING MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE  
HTTP://WWW.MPEGLA.COM.  
OpenSSL Toolkit License Issues  
LICENSE ISSUES  
==============  
The OpenSSL toolkit stays under a dual license, i.e. both the conditions of  
the OpenSSL License and the original SSLeay license apply to the toolkit.  
See below for the actual license texts. Actually both licenses are BSD-style  
Open Source licenses. In case of any license issues related to OpenSSL  
please contact [email protected].  
OpenSSL License  
------------------------  
/*=====================================================  
Copyright (c) 1998-2011 The OpenSSL Project. All rights reserved.  
Redistribution and use in source and binary forms, with or without  
modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the above copyright notice,  
this list of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright  
notice, this list of conditions and the following disclaimer in the  
documentation and/or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software  
must display the following acknowledgment:  
"This product includes software developed by the OpenSSL Project for  
use in the OpenSSL Toolkit. (http://www.openssl.org/)"  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-7  
   
4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be  
used to endorse or promote products derived from this software  
without prior written permission. For written permission, please contact  
5. Products derived from this software may not be called "OpenSSL" nor  
may "OpenSSL" appear in their names without prior written permission  
of the OpenSSL Project.  
6. Redistributions of any form whatsoever must retain the following  
acknowledgment:  
"This product includes software developed by the OpenSSL Project for  
use in the OpenSSL Toolkit (http://www.openssl.org/)"  
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS''  
AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT  
NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN  
NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS  
BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,  
EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT  
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR  
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS  
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF  
LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT  
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY  
OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE  
POSSIBILITY OF SUCH DAMAGE.  
=====================================================  
This product includes cryptographic software written by Eric Young  
([email protected]). This product includes software written by Tim  
Hudson ([email protected]).  
*/  
Original SSLeay License  
----------------------------------  
/* Copyright (C) 1995-1998 Eric Young ([email protected])  
All rights reserved.  
This package is an SSL implementation written by Eric Young  
The implementation was written so as to conform with Netscapes SSL.  
This library is free for commercial and non-commercial use as long as the  
following conditions are aheared to. The following conditions apply to all  
code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code;  
not just the SSL code. The SSL documentation included with this  
distribution is covered by the same copyright terms except that the holder  
is Tim Hudson ([email protected]).  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-8  
Copyright remains Eric Young's, and as such any Copyright notices in the  
code are not to be removed.  
If this package is used in a product, Eric Young should be given attribution  
as the author of the parts of the library used.  
This can be in the form of a textual message at program startup or in  
documentation (online or textual) provided with the package.  
Redistribution and use in source and binary forms, with or without  
modification, are permitted provided that the following conditions are met:  
1. Redistributions of source code must retain the copyright notice, this list  
of conditions and the following disclaimer.  
2. Redistributions in binary form must reproduce the above copyright  
notice, this list of conditions and the following disclaimer in the  
documentation and/or other materials provided with the distribution.  
3. All advertising materials mentioning features or use of this software  
must display the following acknowledgement:  
"This product includes cryptographic software written by Eric Young  
The word 'cryptographic' can be left out if the rouines from the library  
being used are not cryptographic related :-).  
4. If you include any Windows specific code (or a derivative thereof) from  
the apps directory (application code) you must include an  
acknowledgement:  
"This product includes software written by Tim Hudson  
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY  
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED  
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO  
EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR  
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR  
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,  
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF  
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER  
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN  
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE  
OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS  
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGE.  
The licence and distribution terms for any publically available version or  
derivative of this code cannot be changed. i.e. this code cannot simply be  
copied and put under another distribution licence [including the GNU Public  
Licence.]  
*/  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-9  
ENERGY STAR® Program  
Your Computer model may be ENERGY STAR®  
compliant. If the model you purchased is compliant, it is  
labeled with the ENERGY STAR logo on the computer and  
the following information applies.  
TOSHIBA is a partner in the ENERGY STAR Program and  
has designed this computer to meet the latest ENERGY  
STAR guidelines for energy efficiency. Your computer  
ships with the power management options preset to a  
configuration that will provide the most stable operating  
environment and optimum system performance for both  
AC power and battery modes.  
To conserve energy, your computer is set to enter the low-  
power Sleep Mode which shuts down the system and  
display within 15 minutes of inactivity in AC power mode.  
TOSHIBA recommends that you leave this and other  
energy saving features active, so that your computer will  
operate at its maximum energy efficiency. You can wake  
the computer from Sleep Mode by pressing the power  
button.  
Products that earn the ENERGY STAR prevent  
greenhouse gas emissions by meeting strict energy  
efficiency guidelines set by the US EPA and the EU  
Commission. According to the EPA, a computer meeting  
the new ENERGY STAR specifications will use between  
20% and 50% less energy depending on how it is used.  
Visit http://www.eu-energystar.org or http://  
www.energystar.gov for more information regarding the  
ENERGY STAR Program.  
Disposing of the computer and the computer's  
batteries  
Discard this computer in accordance with applicable laws and  
regulations. For further information, contact your local government.  
This computer contains rechargeable batteries. After repeated use,  
the batteries will finally lose their ability to hold a charge and you will  
need to replace them. Under certain applicable laws and regulation, it  
may be illegal to dispose of old batteries by placing them in the trash.  
Please be kind to our shared environment. Check with your local  
government authority for details regarding where to recycle old  
batteries or how to dispose of them properly.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-10  
   
Optical disc drive safety instructions  
Be sure to check the precautions at the end of this section.  
The drive model employs a laser system. To ensure proper use of this  
product, please read this instruction manual carefully and retain for  
future reference. Should the unit ever require maintenance, contact an  
authorized service location.  
Use of controls, adjustments or the performance of procedures other  
than those specified may result in hazardous radiation exposure.  
To prevent direct exposure to the laser beam, do not try to open the  
enclosure.  
Location of the Required Label  
(Sample shown below. Location of the label and manufacturing information  
may vary.)  
Precautions  
CAUTION: This appliance contains  
a laser system and is classified as a  
“CLASS 1 LASER PRODUCT.” To  
use this model properly, read the  
instruction manual carefully and  
keep this manual for your future  
reference. In case of any trouble  
with this model, please contact your  
nearest “AUTHORIZED service  
station.” To prevent direct exposure  
to the laser beam, do not try to  
open the enclosure.  
General Precautions  
TOSHIBA computers are designed to optimize safety, minimize strain and  
withstand the rigors of portability. However, certain precautions should be  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-11  
   
observed to further reduce the risk of personal injury or damage to the  
computer.  
Be certain to read the general precautions below and to note the cautions  
included in the text of the manual.  
Provide adequate ventilation  
Always make sure your computer and AC adaptor have adequate  
ventilation and are protected from overheating when the power is turned on  
or when an AC adaptor is connected to a power outlet (even if your  
computer is in Sleep Mode). In this condition, observe the following:  
Never cover your computer or AC adaptor with any object.  
Never place your computer or AC adaptor near a heat source, such as  
an electric blanket or heater.  
Never cover or block the air vents including those located at the base  
of the computer.  
Always operate your computer on a hard flat surface. Using your  
computer on a carpet or other soft material can block the vents.  
Always provide sufficient space around the computer.  
Overheating your computer or AC adaptor could cause system failure,  
computer or AC adaptor damage or a fire, possibly resulting in serious  
injury.  
Creating a computer-friendly environment  
Place the computer on a flat surface that is large enough for the computer  
and any other items you are using, such as a printer.  
Leave enough space around the computer and other equipment to provide  
adequate ventilation. Otherwise, they may overheat.  
To keep your computer in prime operating condition, protect your work area  
from:  
Dust, moisture, and direct sunlight.  
Equipment that generates a strong electromagnetic field, such as  
stereo speakers (other than speakers that are connected to the  
computer) or speakerphones.  
Rapid changes in temperature or humidity and sources of temperature  
change such as air conditioner vents or heaters.  
Extreme heat, cold, or humidity.  
Liquids and corrosive chemicals.  
Stress injury  
Carefully read the Instruction Manual for Safety and Comfort. It contains  
information on the prevention of stress injuries to your hands and wrists  
that can be caused by extensive keyboard use. It also includes information  
on work space design, posture and lighting that can help reduce physical  
stress.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-12  
Heat injury  
Avoid prolonged physical contact with the computer. If the computer is  
used for long periods, its surface can become very warm. While the  
temperature will not feel hot to the touch, if you maintain physical  
contact with the computer for a long time, for example if you rest the  
computer on your lap or if you keep your hands on the palm rest, your  
skin might suffer a low-heat injury.  
If the computer has been used for a long time, avoid direct contact  
with the metal plate supporting the various interface ports as this can  
become hot.  
The surface of the AC adaptor can become hot when in use but this  
condition does not indicate a malfunction. If you need to transport the  
AC adaptor, you should disconnect it and let it cool before moving it.  
Do not lay the AC adaptor on a material that is sensitive to heat as the  
material could become damaged.  
Pressure or impact damage  
Do not apply heavy pressure to the computer or subject it to any form of  
strong impact as this can damage the computer's components or otherwise  
cause it to malfunction.  
Cleaning the computer  
To help ensure long, trouble-free operation, keep the computer free of dust  
and dirt, and use care with all liquids around it.  
Be careful not to spill liquids into the computer. If the computer does  
get wet, turn the power off immediately and let the computer dry  
completely - in these circumstance you should get the computer  
inspected by an authorized service provider in order to assess the  
scope of any damage.  
Clean the plastics of the computer using a slightly water dampened  
cloth.  
You can clean the display screen by spraying a small amount of glass  
cleaner onto a soft, clean cloth and then wiping the screen gently with  
the cloth.  
Never spray cleaner directly onto the computer or let liquid run into any part  
of it. Never use harsh or caustic chemical products to clean the computer.  
Moving the computer  
While the computer is designed for flexible day-to-day usage you should  
exercise a few simple precautions when moving it in order to help ensure  
trouble-free operation.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-13  
   
Make sure all disk/disc activity has ended before moving the  
computer.  
Turn off (shut down) the computer.  
Disconnect the AC adaptor and all peripherals before moving the  
computer.  
Close the display panel.  
Do not pick up the computer by its display panel.  
Before carrying your computer, shut it down, disconnect the AC  
adaptor and allow it to cool down - a failure to follow this instruction  
may result in minor heat injury.  
Be careful not to subject the computer to impact or shock - a failure to  
follow this instruction could result in damage to computer, computer  
failure or loss of data.  
Never transport your computer with any cards installed - this may  
cause damage to either the computer and/or the card resulting in  
computer failure.  
Always use a suitable carry case when transporting the computer.  
When carrying your computer, be sure to hold it securely so that it  
does not fall or hit anything.  
Do not carry your computer by holding any of its protruding elements.  
Mobile phones  
Please be aware that the use of mobile phones can interfere with the audio  
system. The operation of the computer will not be impaired in any way, but  
it is recommended that a minimum distance of 30cm is maintained between  
the computer and a mobile phone that is in use.  
Instruction Manual for Safety and Comfort  
All important information on the safe and proper use of this computer is  
described in the enclosed Instruction Manual for Safety and Comfort. Be  
sure to read it before using the computer.  
Safety Icons  
Safety icons are used in this manual to bring important information to your  
attention. Each type of message is identified as shown below.  
Indicates a potentially hazardous situation, which could result in death or  
serious injury, if you do not follow instructions.  
A caution informs you that improper use of equipment or failure to follow  
instructions may cause data loss, equipment damage, or may result in  
minor or moderate injury.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-14  
 
Please read. A note is a hint or advice that helps you make best use of  
your equipment.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1-15  
Chapter 2  
Getting Started  
This chapter provides an equipment checklist, and basic information to  
start using your computer.  
Some of the features described in this manual may not function properly if  
you use an operating system that was not pre-installed by TOSHIBA.  
Equipment checklist  
Carefully unpack your computer, taking care to save the box and  
packaging materials for future use.  
Hardware  
Check to make sure you have all the following items:  
TOSHIBA Portable Personal Computer  
AC adaptor and power cord (2-pin plug or 3-pin plug)  
Documentation  
Quickstart  
Instruction Manual for Safety and Comfort  
Warranty information  
If any of the items are missing or damaged, contact your dealer  
immediately.  
Conventions  
This manual uses the following formats to describe, identify, and highlight  
terms and operating procedures.  
Click  
Tap the Touch Pad or click the left Touch  
Pad control button once.  
Left-click the mouse once.  
Tap the touch screen once (only for touch  
screen models).  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-1  
         
Right-click  
Double-click  
Charm  
Click the right Touch Pad control button  
once.  
Right-click the mouse once.  
Press and hold on the touch screen (only for  
touch screen models).  
Tap the Touch Pad or click the left Touch  
Pad control button twice.  
Left-click the mouse twice.  
Tap the touch screen twice (only for touch  
screen models).  
By swiping in from the right edge (only for touch  
screen models) or pointing the mouse pointer to  
the lower-right (or upper-right) corner of your  
screen, you will find a list of charms: Search,  
Share, Start, Devices and Settings.  
Desktop  
Click the Desktop tile from the Start screen to  
access the desktop.  
Start screen  
You can go to the Start screen by clicking the  
Start charm. You can also use the Windows®  
logo key (  
) on your keyboard to go to Start  
screen. For detailed information, please refer to  
the Windows Help and Support.  
Using your computer for the first time  
Be sure to read the enclosed Instruction Manual for Safety and Comfort for  
information on the safe and proper use of this computer. It is intended to  
help you be more comfortable and productive while using a notebook  
computer. By following the recommendations in it you may reduce your  
chance of developing a painful or disabling injury to your hand, arms,  
shoulders or neck.  
This section provides basic information to start using your computer. It  
covers the following topics:  
Connecting the AC adaptor  
Opening the display  
Turning on the power  
Initial setup  
Getting to know Windows  
Use a virus-check program and make sure it is updated regularly.  
Never format storage media without checking its content - formatting  
destroys all stored data.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-2  
 
It is a good idea to periodically back up the internal Hard Disk Drive or  
other main storage device to external media. General storage media is  
not durable or stable over long periods of time and under certain  
conditions may result in data loss.  
Before you install a device or application, save any data in memory to  
the Hard Disk Drive or other storage media. Failure to do so may  
result in the loss of data.  
Connecting the AC adaptor  
Attach the AC adaptor when you need to charge the battery or you want to  
operate from AC power. It is also the fastest way to get started, because  
the battery pack will need to be charged before you can operate from  
battery power.  
The AC adaptor can automatically adjust to any voltage ranging from 100  
to 240 volts and to a frequency of either 50 or 60 hertz, enabling you to use  
this computer in almost any country/region. The adaptor converts AC  
power to DC power and reduces the voltage supplied to this computer.  
Always use the TOSHIBA AC adaptor that was included with your  
computer, or use AC adaptors specified by TOSHIBA to avoid any risk  
of fire or other damage to the computer. Use of an incompatible AC  
adaptor could cause fire or damage to the computer possibly resulting  
in serious injury. TOSHIBA assumes no liability for any damage  
caused by use of an incompatible adaptor.  
Never plug the AC adaptor into a power source that does not  
correspond to both the voltage and the frequency specified on the  
regulatory label of the unit. Failure to do so could result in a fire or  
electric shock, possibly resulting in serious injury.  
Always use or purchase power cables that comply with the legal  
voltage and frequency specifications and requirements in the country  
of use. Failure to do so could result in a fire or electric shock, possibly  
resulting in serious injury.  
The supplied power cord conforms to safety rules and regulations in  
the region the computer is bought and should not be used outside this  
region. For use in other regions, please buy power cords that conform  
to safety rules and regulations in the particular region.  
Do not use a 3-pin to 2-pin conversion plug.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-3  
 
When you connect the AC adaptor to the computer, always follow the  
steps in the exact order as described in this User’s Manual.  
Connecting the power cable to a live electrical outlet should be the last  
step otherwise the adaptor DC output plug could hold an electrical  
charge and cause an electrical shock or minor bodily injury when  
touched. As a general safety precaution, avoid touching any metal  
parts.  
Never place your computer or AC adaptor on a wooden surface,  
furniture, or any other surface that could be marred by exposure to  
heat since the computer base and AC adaptor's surface increase in  
temperature during normal use.  
Always place your computer or AC adaptor on a flat and hard surface  
that is resistant to heat damage.  
Refer to the enclosed Instruction Manual for Safety and Comfort for  
detailed precautions and handling instructions.  
1. Connect the power cord to the AC adaptor.  
Figure 2-1 Connecting the power cord to the AC adaptor (2-pin plug)  
Figure 2-2 Connecting the power cord to the AC adaptor (3-pin plug)  
Either a 2-pin or 3-pin adaptor/cord will be included with the computer  
depending on the model.  
2. Connect the AC adaptor’s DC output plug to the DC IN 19V jack on  
your computer.  
Figure 2-3 Connecting the DC output plug to the computer  
1
2
1. DC IN 19V jack  
2. DC output plug  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-4  
3. Plug the power cord into a live wall outlet - the DC IN/Battery indicator  
should glow.  
Opening the display  
The display panel can be opened to a wide range of angles for optimal  
viewing.  
While holding down the palm rest with one hand so that the main body of  
the computer is not raised, slowly lift the display panel - this will allow the  
angle of the display panel to be adjusted to provide optimum clarity.  
Figure 2-4 Opening the display panel  
1
1. Display panel  
Product appearance depends on the model you purchased.  
Use reasonable care when opening and closing the display panel. Opening  
it vigorously or slamming it shut could damage the computer.  
Be careful not to open the display panel too far as this could put stress  
on the display panel’s hinges and cause damage.  
Do not press or push on the display panel.  
Do not lift the computer by the display panel.  
Do not close the display panel with pens or any other objects left in  
between the display panel and the keyboard.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-5  
 
When opening or closing the display panel, place one hand on the  
palm rest to hold the computer in place and use the other hand to  
slowly open or close the display panel (Do not use excessive force  
when opening or closing the display panel).  
Turning on the power  
This section describes how to turn on the power - the Power indicator will  
then indicate the status. Please refer to the Power Condition Descriptions  
section for more information.  
After you turn on the power for the first time, do not turn it off until you  
have set up the operating system.  
Volume cannot be adjusted during Windows Setup.  
1. Open the display panel.  
2. Press the computer's power button.  
Figure 2-5 Turning on the power  
1
1. Power button  
Initial setup  
The Windows 8 Startup Screen will be the first screen displayed when you  
turn on the power. Follow the on-screen instructions on each screen in  
order to properly install the operating system.  
When it is displayed, be sure to read the License Terms carefully.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-6  
   
Getting to know Windows  
For detailed information on what is new and how to operate Windows 8,  
please refer to the Windows Help and Support.  
Start screen  
The Start screen is the launching pad for everything you can do in the  
Windows operating system, providing new and easy ways to access  
everything from your favorite apps and Web sites to your contacts and  
other important information.  
From the Start screen, you can just start typing to search for what you  
want. From there, you can easily switch between results for apps, files, and  
more.  
Charms  
Use the Windows Charms to start apps, find documents, set up system  
components, and perform most other computing tasks.  
By pointing the mouse pointer to the upper or lower right corner of your  
screen, you will find a list of charms: Search, Share, Start, Devices and  
Settings.  
Search  
This Charm allows you to locate items on your  
computer. It can help you find apps, documents,  
photos, and your favorite music.  
Share  
Start  
This Charm allows you to share music and  
photos with your favorite social Web sites.  
This Charm takes you to the Start screen or, if  
already on the Start screen, returns you to your  
last app.  
Devices  
Settings  
This Charm allows you to manage your hardware  
devices.  
This Charm allows you to manage your system  
settings.  
Tiles  
Tiles can be accessed and launched from the Start screen.  
Typical Start screen tiles are the Desktop tile and Mail tile, as well as tiles  
representing all other applications downloaded to your system.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-7  
Windows Store  
Although many applications will be pre-installed or built-in to your  
computer, you will also have the ability to download many other  
applications at the click of your mouse.  
In the Windows Store you can search for and browse thousands of apps,  
all grouped into easy to find categories.  
Turning off the power  
The power can be turned off in one of the following modes, either Shut  
Down Mode, Sleep Mode or Hibernation Mode.  
Shut Down Mode  
When you turn off the power in Shut Down Mode, no data will be saved  
and the computer will boot to the operating system's main screen the next  
time it is turned on.  
1. If you have entered data, either save it to the Hard Disk Drive or to  
other storage media.  
2. Make sure all disk/disc activity has stopped before removing the disk/  
disc.  
If you turn off the power while a disk (disc) is being accessed, you may  
lose data or damage the disk.  
Never turn off the power while an application is running. Doing so  
could cause loss of data.  
Never turn off the power, disconnect an external storage device or  
remove storage media during data read/write. Doing so can cause  
data loss.  
3. Click the Settings charm.  
4. Click Power and then select Shut down.  
5. Turn off any peripheral devices connected to your computer.  
Do not turn the computer or peripheral devices back on immediately - wait  
a short period to avoid any potential damage.  
Restarting the computer  
Certain conditions require that you reset the computer, for example if:  
You change certain computer settings.  
If you need to restart the computer, there are two ways this can be  
achieved:  
In the Settings charm, click Power and then select Restart.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-8  
       
Press CTRL, ALT and DEL simultaneously (once) to display the menu  
window, and then select Restart by clicking the power icon ( ) in the  
lower-right corner.  
Sleep Mode  
If you have to interrupt your work, you are able to turn off the power without  
exiting from your software by placing the computer into Sleep Mode. In this  
mode data is maintained in the computer's main memory so that when you  
turn on the power again, you can continue working right where you left off.  
When you have to turn off your computer aboard an aircraft or in places  
where electronic devices are regulated or controlled, always completely  
shut down the computer. This includes turning off any wireless  
communication functionalities, and cancelling settings that reactivate the  
computer automatically, such as a timer recording function. Failure to  
completely shut down the computer in this way could allow the operating  
system to reactivate and run pre-programmed tasks or preserve unsaved  
data, which could interfere with aviation or other systems, possibly causing  
serious injury.  
Before entering Sleep Mode, be sure to save your data.  
Do not switch to Sleep Mode while transferring data to external media,  
such as USB devices, memory media or other external memory  
devices, as data will be lost.  
Do not install or remove a memory module while the computer is in  
Sleep Mode. The computer or the memory module could be damaged.  
When the AC adaptor is connected, the computer will go into Sleep  
Mode according to the settings in the Power Options (to access it,  
click Desktop -> Desktop Assist (in taskbar) -> Control Panel ->  
System and Security -> Power Options).  
To restore the operation of the computer from Sleep Mode, press and  
hold the power button or any key on the keyboard for a short amount  
of time. Please note that keyboard keys can only be used if the Wake-  
up on Keyboard option is enabled within the TOSHIBA System  
Settings.  
If the computer enters Sleep Mode while a network application is  
active, the application might not be restored when the computer is  
next turned on and the system returns from Sleep Mode.  
To prevent the computer from automatically entering Sleep Mode,  
disable Sleep Mode within the Power Options.  
To use the Hybrid Sleep function, configure it in the Power Options.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-9  
 
Benefits of Sleep Mode  
The Sleep Mode feature provides the following benefits:  
Restores the previous working environment more rapidly than the  
Hibernation Mode feature.  
Saves power by shutting down the system when the computer  
receives no input or hardware access for the time period set by the  
System Sleep Mode feature.  
Allows the use of the panel power off feature.  
Executing Sleep Mode  
You can enter Sleep Mode in one of three ways:  
In the Settings charm, click Power and then select Sleep.  
Close the display panel. Please note that this feature must be enabled  
within the Power Options.  
Press the power button. Please note that this feature must be enabled  
within the Power Options.  
When you turn the power back on, you can continue where you left off  
when you shut down the computer.  
When the computer is in Sleep Mode, the Power indicator will blink  
white.  
If you are operating the computer on battery power, you can lengthen  
the overall operating time by turning it off into Hibernation Mode -  
Sleep Mode will consume more power while the computer is off.  
Sleep Mode limitations  
Sleep Mode will not function under the following conditions:  
Power is turned back on immediately after shutting down.  
Memory circuits are exposed to static electricity or electrical noise.  
Hibernation Mode  
The Hibernation Mode feature saves the contents of memory to the Hard  
Disk Drive when the computer is turned off so that, the next time it is turned  
on, the previous state is restored. Please note that the Hibernation Mode  
feature does not save the status of any peripheral devices connected to the  
computer.  
Save your data. While entering Hibernation Mode, the computer saves  
the contents of memory to the Hard Disk Drive. However, for safety  
sake, it is best to save your data manually.  
Data will be lost if you disconnect the AC adaptor before the save is  
completed.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-10  
 
Do not install or remove a memory module while the computer is in  
Hibernation Mode, as data will be lost.  
Do not switch to Hibernation Mode while transferring data to external  
media, such as USB devices, memory media or other external  
memory devices, as data will be lost.  
Benefits of Hibernation Mode  
The Hibernation Mode feature provides the following benefits:  
Saves data to the Hard Disk Drive when the computer automatically  
shuts down because of a low battery condition.  
You can return to your previous working environment immediately  
when you turn on the computer.  
Saves power by shutting down the system when the computer  
receives no input or hardware access for the time period set by the  
System Hibernate feature.  
Allows the use of the panel power off feature.  
Starting Hibernation Mode  
To enter Hibernation Mode, follow the steps below.  
1. Click the Settings charm.  
2. Click Power and then select Hibernate.  
In order to show Hibernate in Power menu, you need to setup according to  
the following steps:  
1. Click Desktop -> Desktop Assist (in taskbar) -> Control Panel ->  
System and Security -> Power Options.  
2. Click Choose what the power button does or Choose what closing  
the lid does.  
3. Click Change settings that are currently unavailable.  
4. Select the Hibernate check box from Shutdown settings.  
5. Click the Save changes button.  
Automatic Hibernation Mode  
The computer can be configured to enter Hibernation Mode automatically  
when you press the power button or close the lid. In order to define these  
settings, you can follow the steps as described below:  
1. Click Power Options and then click Choose what the power button  
does or Choose what closing the lid does.  
2. Enable the desired Hibernation Mode settings for When I press the  
power button and When I close the lid.  
3. Click the Save changes button.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-11  
Data save in Hibernation Mode  
When you turn off the power in Hibernation Mode, the computer will take a  
moment to save the current data in memory to the Hard Disk Drive.  
After you turn off the computer, and the content of memory has been saved  
to the Hard Disk Drive, turn off the power to any peripheral devices.  
Do not turn the computer or devices back on immediately. Wait a moment  
to let all capacitors fully discharge.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2-12  
Chapter 3  
The Grand Tour  
This chapter identifies the various components of the computer - it is  
recommended that you become familiar with each before you operate the  
computer.  
Legal Footnote (Non-applicable Icons)  
For more information regarding Non-applicable Icons, please refer to the  
Legal Footnotes section.  
Please handle your computer carefully to avoid scratching or damaging the  
surface.  
Front with the display closed  
The following figure shows the front of the computer with its display panel  
in the closed position.  
Figure 3-1 Front of the computer with display panel closed  
1
2
3
4
1. DC IN/Battery indicator  
2. Power indicator  
3. Wireless communication indicator  
4. Memory media slot  
Product appearance depends on the model you purchased.  
DC IN/Battery  
indicator  
The DC IN/Battery indicator shows the condition  
of the DC IN and the battery's charge - white  
indicates the battery is fully charged while the  
power is being correctly supplied from the AC  
power adaptor.  
section for more information on this feature.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-1  
     
Power indicator  
The Power indicator glows white when the  
computer is turned on. However, if you turn the  
computer off into Sleep Mode, this indicator will  
blink white.  
Wireless  
communication  
indicator  
The Wireless communication indicator glows  
amber when the Bluetooth or Wireless LAN  
functions are turned on.  
Only some models are equipped with Bluetooth  
and Wireless LAN functions.  
Memory media slot  
This slot lets you insert an SD™/SDHC™/  
SDXC™ memory card, miniSD™/microSD™  
Card and MultiMediaCard™. Refer to the  
Memory media section for more information.  
Keep foreign metal objects, such as screws, staples and paper clips, out of  
the Memory media slot. Foreign metal objects can create a short circuit,  
which can cause damage and fire, possibly resulting in serious injury.  
Left side  
The following figure shows the left side of the computer.  
Figure 3-2 The left side of the computer  
1
2
3
4
1. DC IN 19V jack  
2. Universal Serial Bus (USB 2.0) port  
3. Universal Serial Bus (USB 2.0) port*  
4. Optical disc drive  
* Provided with some models.  
Product appearance depends on the model you purchased.  
DC IN 19V jack  
The AC adaptor connects to this jack in order to  
power the computer and charge its internal  
batteries. Please note that you should only use  
the model of AC adaptor supplied with the  
computer at the time of purchase - using the  
wrong AC adaptor can cause damage to the  
computer.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-2  
   
Universal Serial Bus One or two Universal Serial Bus ports, which  
(USB 2.0) port  
comply to the USB 2.0 standard, are provided on  
the left side of the computer.  
The USB 2.0 port is not compatible with USB 3.0  
devices.  
Please note that it is not possible to confirm the operation of all functions of  
all USB devices that are available. Some functions associated with a  
specific device might not operate properly.  
Keep foreign metal objects, such as screws, staples and paper clips, out of  
the USB port. Foreign metal objects can create a short circuit, which can  
cause damage and fire, possibly resulting in serious injury.  
Optical disc drive  
The computer may be configured with a DVD  
Super Multi drive, Blu-ray™ Combo drive or Blu-  
ray™ Writer drive.  
2.6GB and 5.2GB DVD-RAM media cannot be read from or written to.  
Right side  
The following figure shows the right side of computer.  
Figure 3-3 The right side of the computer  
1
2
3
4
5
6
7
8
9
1. Headphone jack  
2. Microphone jack  
3. Universal Serial Bus (USB 3.0) port  
4. Universal Serial Bus (USB 3.0) port  
5. HDMI out port*  
6. LAN jack  
7. External RGB monitor port*  
8. Cooling vents  
9. Security lock slot  
* Provided with some models.  
Product appearance depends on the model you purchased.  
Headphone jack  
A 3.5 mm mini headphone jack enables  
connection of stereo headphones.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-3  
 
Microphone jack  
A 3.5 mm mini microphone jack enables  
connection of a mini jack for monaural  
microphone input.  
The integrated sound system provides support for the computer's internal  
speakers and microphone, as well as allowing an external microphone and  
headphones to be connected via the appropriate jacks.  
Universal Serial Bus Two Universal Serial Bus ports, which comply to  
(USB 3.0) ports  
the USB 3.0 standard, are provided on the right  
side of the computer.  
The USB 3.0 port is compliant with USB 3.0  
standard and backward compatible with USB 2.0  
devices.  
The port with the icon ( ) has Sleep and Charge  
function.  
USB 3.0 port(s) may work as USB 2.0 port(s) when operating in USB  
Legacy Emulation mode.  
HDMI out port  
LAN jack  
HDMI out port can connect with Type A  
connector HDMI cable.  
This jack lets you connect to a LAN. The adaptor  
has built-in support for Ethernet LAN (10  
megabits per second, 10BASE-T), or Fast  
Ethernet LAN (100 megabits per second,  
100BASE-TX). Some models are equipped with  
a Gigabit Ethernet LAN (1000 megabits per  
second, 1000BASE-T). Refer to Operating  
Basics, for details.  
Do not connect any cable other than a LAN cable to the LAN jack. It could  
cause damage or malfunction.  
External RGB monitor This port provides 15-pin, analog RGB port.  
port  
assignment section for information on external  
RGB monitor port pin assignment. This port  
allows you to connect an external RGB monitor  
to the computer.  
Cooling vents  
The cooling vents help the processor to avoid  
overheating.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-4  
   
Security lock slot  
A security cable can be attached to this slot and  
then connected to a desk or other large object in  
order to deter theft of the computer.  
Back  
The following figure shows the back of computer.  
Figure 3-4 The back of the computer  
1
1. Battery pack  
Battery pack  
The rechargeable lithium-ion battery pack  
provides power to the computer when the AC  
adaptor is not connected.  
For more detailed information on the use and  
operation of the battery pack please refer to the  
Battery section.  
Underside  
The following figures show the underside of the computer. You should  
ensure that the display is closed before the computer is turned over to  
avoid causing any damage.  
Figure 3-5 The underside of the computer  
1
2
4
1. Battery lock  
3. Cooling vents  
2. Battery release latch  
4. Memory module slot  
Product appearance depends on the model you purchased.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-5  
   
Battery lock  
Slide the battery lock to release the battery pack  
ready for removal.  
Battery release latch Slide and hold this latch into its "Unlock" position  
in order to release the battery pack for removal.  
For more detailed information on removing the  
battery pack please refer to the Battery section.  
Memory module slot The memory module slot allows for the  
installation, replacement and removal of  
additional memory module.  
The size of the memory modules varies  
depending on the model. The actual amount of  
useable system memory will be less than the  
installed memory modules.  
Refer to the Additional memory module section.  
Cooling vents  
The cooling vents help the processor to avoid  
overheating.  
Do not block the cooling vents. Keep foreign metal objects, such as  
screws, staples and paper clips, out of the cooling vents. Foreign metal  
objects can create a short circuit, which can cause damage and fire,  
possibly resulting in serious injury.  
Carefully clean the dust on the cooling vents’ surface using a soft cloth.  
Front with the display open  
This section shows the computer with the display panel open. In order to  
open the display, lift the display panel up and position it at a comfortable  
viewing angle for you.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-6  
   
Figure 3-6 The front of the computer with the display panel open  
3
2
4
5
1
9
7
6
7
10  
11  
13  
12  
14  
8
3
2
4
5
1
9
7
6
7
10  
11  
13  
12  
14  
8
1. Wireless communication antennas  
(not shown)*  
8. Keyboard  
2. Microphone*  
9. Stereo speakers  
3. Web Camera LED*  
4. Web Camera*  
10. Power button  
11. Touch Pad  
5. Microphone*  
6. Display screen  
7. Display hinges  
12. Touch Pad control button  
13. Touch Pad control button  
14. Touch Pad ON/OFF indicator  
* Provided with some models.  
Product appearance depends on the model you purchased.  
Wireless  
communication  
antennas  
Some computers in this series are equipped with  
the Wireless LAN/Bluetooth antennas.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-7  
Legal Footnote (Wireless LAN)  
For more information regarding Wireless LAN, please refer to the Legal  
Footnotes section.  
Microphone  
The built-in microphone allows you to import and  
record sounds for your application - please refer  
to the Sound System and Video mode section for  
more information.  
Web Camera LED  
Web Camera  
The Web Camera LED glows when the Web  
Camera is operating.  
Web Camera is a device that allows you to  
record video or take photographs with your  
computer. You can use it for video chatting or  
video conferences using a communication tool.  
Do not point the web camera directly at the sun.  
Do not touch or press strongly on the web camera lens. Doing so may  
reduce image quality. Use an eyeglass cleaner (cleaner cloth) or other  
soft cloth to clean the lens if it becomes dirty.  
Display screen  
41.3cm (17.3") LCD screen, configured with the  
following resolutions:  
HD, 1600 horizontal x 900 vertical pixels  
FHD, 1920 horizontal x 1080 vertical pixels  
Please be aware that, when the computer is  
operating on the AC adaptor, the image  
displayed on the internal screen will be  
somewhat brighter than when it operates on  
battery power. This difference in brightness  
levels is intended to save power when operating  
on batteries.  
Legal Footnote (LCD)  
For more information regarding LCD, please refer to the Legal Footnotes  
section.  
Display hinges  
Keyboard  
The display hinges allow the display panel to be  
positioned at a variety of easy-to-view angles.  
Your computer’s keyboard contains character  
keys, control keys, function keys, and special  
Windows keys, providing all the functionality of a  
full-size keyboard.  
Refer to the The Keyboard section for details.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-8  
     
Stereo speakers  
The speakers emit sound generated by your  
software as well as audio alarms, such as low  
battery condition, generated by the system.  
Power button  
Touch Pad  
Press this button to turn the computer's power on  
or off.  
The Touch Pad located in the palm rest is used  
to control the movement of the on-screen pointer.  
To use the Touch Pad, simply touch and move  
your fingertip across it in the direction you want  
the on-screen pointer to go.  
Touch Pad control  
buttons  
The two buttons located on the bottom of the  
Touch Pad are used like the buttons on a  
standard mouse - press the left button to select a  
menu item or to manipulate text or graphics  
designated by the pointer, and press the right  
button to display a menu or other function  
depending on the software you are using.  
Touch Pad ON/OFF  
indicator  
Double tap this indicator to enable/disable the  
Touch Pad. It also shows the status of the Touch  
Pad:  
Enabled: off  
Disabled: glows white  
Internal Hardware Components  
This section describes the internal hardware components of your computer.  
The actual specifications may vary depending on the model you  
purchased.  
Battery pack  
This computer includes a battery pack inside.  
However, please do not attempt to dismount or  
replace it by yourself. Please contact an  
authorized TOSHIBA service provider, if  
necessary.  
The rechargeable lithium-ion battery pack  
provides power to the computer when the AC  
adaptor is not connected.  
For more detailed information on the use and  
operation of the battery pack please refer to the  
Battery section.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-9  
     
Legal Footnote (Battery Life)  
For more information regarding Battery Life, please refer to the Legal  
Footnotes section.  
CPU  
The processor type varies depending on model.  
To check which type of processor is included in  
your model, open the TOSHIBA PC Health  
Monitor utility by clicking Desktop -> Desktop  
Assist (in taskbar) -> Support & Recovery ->  
PC Health Monitor, and then click PC  
Information. .  
Legal Footnote (CPU)  
For more information regarding CPU, please refer to the Legal Footnotes  
section.  
Hard Disk Drive  
The capacity of the hard disk drive varies  
depending on the model.  
To check which type of HDD is included in your  
model, open the TOSHIBA PC Health Monitor  
utility by clicking Desktop -> Desktop Assist (in  
taskbar) -> Support & Recovery -> PC Health  
Monitor, and then click PC Information.  
Please note that part of the hard disk's overall  
capacity is reserved as administration space.  
Legal Footnote (Hard Disk Drive (HDD) Capacity)  
For more information regarding Hard Disk Drive (HDD) Capacity, please  
refer to the Legal Footnotes section.  
RTC battery  
The internal RTC battery backs up the Real Time  
Clock (RTC) and calendar.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-10  
 
Video RAM  
The memory in a computer's graphics adaptor,  
used to store the image displayed on a bitmap  
display.  
The amount of Video RAM available is  
dependent on the computer's system memory.  
Desktop -> Desktop Assist (in taskbar) ->  
Control Panel -> Appearance and  
Personalization -> Display -> Adjust  
resolution.  
The amount of Video RAM can be verified by  
clicking the Advanced settings button in the  
Screen Resolution window.  
Legal Footnote (Memory (Main System))  
For more information regarding Memory (Main System), please refer to the  
Legal Footnotes section.  
Display controller  
The display controller interprets software  
commands into hardware commands that turn  
particular parts on the screen on or off.  
The display controller also controls the video  
mode and uses industry standard rules to govern  
the screen resolution and the maximum number  
of colors that can be displayed at a time.  
Therefore, software written for a given video  
mode will run on any computer that supports that  
mode.  
Legal Footnote (Graphics Processing Unit (GPU))  
For more information regarding Graphics Processing Unit (GPU), please  
refer to the Legal Footnotes section.  
Graphics Control  
Some NVIDIA graphics models may include NVIDIA® Optimus™  
technology feature.  
NVIDIA® Optimus™ technology intelligently optimizes notebook  
performance by seamlessly switching between a discrete NVIDIA GPU for  
great graphics performance and an Intel integrated graphics chip for  
sustained battery life. Switching is automatic and does not require the user  
to reboot the computer.  
In the Manage 3D Settings menu of NVIDIA Control Panel, you can change  
the global 3D settings and create overrides for specific programs. The  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-11  
   
overrides will be used automatically each time the specified programs are  
launched.  
Please use the default setting for NVIDIA Optimus technology.  
If the program does not run normally after the setting has been  
changed, please restore the program to the default setting.  
If the program does not run normally, please restore the Preferred  
graphics processor to the default setting.  
When you use some video playback programs to play video files, the  
preferred graphics processor in the "Program Settings" tab cannot be  
changed to the graphics other than "Integrated Graphics".  
To access the Program Settings, click "NVIDIA Control Panel" ->  
"Manage 3D settings" -> "Program Settings".  
To launch the NVIDIA Control Panel, Click Desktop -> Desktop Assist  
(in taskbar) -> Control Panel -> Hardware and Sound -> NVIDIA  
Control Panel.  
For more information about the NVIDIA Control Panel system, please refer  
to the NVIDIA Control Panel Help. To access it, click Help from the main  
menu and then select NVIDIA Control Panel Help.  
On Optimus models, two kinds of Display Drivers are installed: “Intel® HD  
Graphics Driver” and “NVIDIA Graphics Driver XXX.XX”.  
Do not uninstall the display driver from “Uninstall Program” in the Control  
Panel.  
If you have to uninstall the display driver, please follow the steps below:  
1. Uninstall “NVIDIA Graphics Driver XXX.XX”.  
2. Then uninstall “Intel® HD Graphics Driver”.  
Intel® Display Power Saving Technology  
Intel GPU models may include the Display Power Saving Technology  
feature that can save the computer's power consumption by optimizing  
picture contrast on the internal LCD.  
This feature can be used if the computer is:  
running under battery mode  
using the internal LCD display only  
The Display Power Saving Technology feature is enabled as the factory  
default. If you want to disable this feature, you can disable it.  
The Display Power Saving Technology feature can be disabled in the Intel®  
HD Graphics Control Panel/Intel® Graphics and Media Control Panel.  
You can access this control panel in the following way:  
Right-click on the desktop and click Graphics Properties...  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-12  
In Intel® HD Graphics Control Panel:  
1. Click Power and select On battery.  
2. Click Off under Display Power Saving Technology.  
3. Click Apply.  
If you want to enable this feature, under the conditions mentioned above,  
click On under Display Power Saving Technology.  
In Intel® Graphics and Media Control Panel:  
1. Click Power.  
2. Select On battery from the drop-down menu in Power Source.  
3. Clear the Display Power Saving Technology check box.  
4. Click OK.  
If you want to enable this feature, under the conditions mentioned above,  
select the Display Power Saving Technology check box.  
AMD® Vari-Bright™  
AMD GPU models may include the AMD® Vari-Brightfeature that can  
save the computer's power consumption by optimizing picture contrast on  
the internal LCD.  
This feature can be used if the computer is:  
running under battery mode  
using the internal LCD display only  
The Vari-Bright feature can be enabled in the AMD VISION Engine Control  
Center/Catalyst Control Center. You can access the center in the following  
way:  
Right-click on the desktop and click AMD VISION Engine Control  
Center/Catalyst Control Center.  
In this control panel:  
1. Select PowerPlay™ under Power.  
2. Select Enable PowerPlay™ check box, and then select the Enable  
Vari-Bright™ check box.  
If you want to improve the picture quality under the conditions mentioned  
above, adjust the setting towards Maximize Quality or disable this feature.  
Power Condition Descriptions  
Power conditions  
The computer's operating capability and battery charge status are affected  
by different power conditions, including whether an AC adaptor is  
connected and what the charge level is for that battery.  
The LED in the table below refers to the DC IN/Battery indicator.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-13  
   
Power on  
Power off  
(no operation)  
AC adaptor Battery fully  
connected charged  
• Operates  
• No charge  
• LED: white  
• No charge  
• LED: white  
Battery partially • Operates  
• Quick charge  
• LED: amber  
charged or no  
charge  
• Charge  
• LED: amber  
AC adaptor Remaining  
• Operates  
• LED: off  
not  
battery capacity  
connected  
is above low  
battery trigger  
point  
Remaining  
battery capacity  
is below low  
battery trigger  
point  
• Operates  
• LED: flashes  
amber  
Remaining  
Computer shuts  
battery capacity down  
is exhausted  
DC IN/Battery indicator  
Check the DC IN/Battery indicator to determine the status of the battery  
pack and the power status with the AC adaptor connected. The following  
indicator conditions should be noted:  
Flashing amber  
The battery charge is low. The AC adaptor must  
be connected in order to recharge the battery.  
Amber  
Indicates the AC adaptor is connected and the  
battery is charging.  
White  
Indicates the AC adaptor is connected and the  
battery is fully charged.  
No light  
Under any other conditions, the indicator does  
not light.  
If the battery pack becomes too hot while it is being charged, the charge  
will stop and the DC IN/Battery indicator will go out. When the battery  
pack's temperature falls to a normal range, charging will resume - this  
process will occur regardless of whether the computer's power is on or off.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-14  
 
Power indicator  
Check the Power indicator to determine the power status of the computer -  
the following indicator conditions should be noted:  
White  
Indicates power is being supplied to the  
computer and the computer is turned on.  
Flashing white  
Indicates that the computer is in Sleep Mode and  
that there is sufficient power available (AC  
adaptor or battery) to maintain this condition.  
No light  
Under any other conditions, the indicator does  
not light.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-15  
Chapter 4  
Operating Basics  
This chapter describes the basic operations of your computer, and  
highlights the precautions that should be taken when using it.  
Using the Touch Screen  
Some models are equipped with a touch screen.  
You can use your finger to manipulate icons, buttons, menu items, the  
onscreen keyboard, and other items on the touch screen.  
Tap  
Simply tap your finger once on the touch screen  
to activate an item, such as an app.  
Press and hold  
Pinch or stretch  
Press your finger down and leave it there for a  
few seconds. This will show information to help  
you learn more about an item or will open a  
menu specific to what you are doing.  
Touch the screen or an item with two or more  
fingers, and then move the fingers toward each  
other (pinch) or away from each other (stretch).  
This will show different levels of information or  
visually zooms in or out.  
Rotate  
Slide  
Put two or more fingers on an item and then turn  
your hand to rotate things in the direction you  
turn your hand. Only some items can be rotated.  
Drag your finger on the touch screen to move  
through what's on the screen.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-1  
   
Swipe  
Quickly move your finger in from the edge of the  
screen, without pausing when you first touch it.  
Swipe from the left edge: shows your recently  
opened apps, and so on.  
Swipe from the right edge: opens or closes the  
charms (Search, Share, Start, Devices, Settings).  
Swipe from the top edge: opens or closes the  
app command bar.  
For details and more advanced touch screen gestures to interact with  
Windows 8, please refer to Help and Support.  
Using the Touch Pad  
The Touch Pad located in the palm rest may support the following  
gestures:  
Tap  
Tap once on the Touch Pad to activate an item,  
such as an app.  
Two-Finger Tap  
Tap once on the Touch Pad with two fingers  
together to display a menu or other function  
depending on the software you are using.  
(Similar to right-click)  
Pinch or stretch  
Place two or more fingers down on the Touch  
Pad and move them toward each other (pinch) or  
away from each other (stretch). This will show  
different levels of information or visually zooms in  
or out.  
Two-Finger Scroll  
Place two fingers down and slide them vertically  
or horizontally from anywhere on the Touch Pad.  
This allows you to operate the scroll bars of a  
window.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-2  
 
Swipe  
Quickly move your finger in from the edge of the  
Touch Pad, without pausing when you first touch  
it.  
Swipe from the left edge: shows your recently  
opened apps.  
Swipe from the right edge: opens or closes the  
charms (Search, Share, Start, Devices, Settings).  
Swipe from the top edge: opens or closes the  
app command bar.  
Some of the Touch Pad operations described in this section are only  
supported in certain applications.  
The Keyboard  
The number of keys available on your keyboard will depend on which  
country/region your computer is configured for, with keyboards being  
available for numerous languages.  
There are different types of keys, specifically typewriter keys, function keys,  
soft keys, Windows special keys and the keypad overlay.  
Never remove the key caps on your keyboard. Doing so could cause  
damage to the parts under the key caps.  
Keyboard indicator  
The following figure shows the position of the CAPS LOCK indicator and  
NUM LOCK indicator which show the following conditions:  
When the CAPS LOCK indicator glows, the keyboard will produce  
capitals when any letter is typed.  
When the NUM LOCK indicator glows, the ten key allows you to enter  
numbers.  
Figure 4-1 Keypad indicators  
2
1
1. CAPS LOCK indicator  
2. NUM LOCK indicator  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-3  
 
CAPS LOCK  
NUM LOCK  
This indicator glows green when letter keys are  
locked into their uppercase format.  
When the NUM LOCK indicator glows, you can  
use the number keys on the keyboard for number  
entry.  
Function Key  
The function keys (F1 ~ F12) are the twelve keys at the top of your  
keyboard.  
You can configure the function keys’ mode as "Special function mode" or  
"Standard F1-F12 mode" by clicking Desktop -> Desktop Assist (in  
taskbar) -> Tools & Utilities -> System Settings -> Keyboard.  
"Special function mode" allows you to use special functions without  
pressing the FN key.  
Special  
Standard F1-  
Function  
function mode F12 mode  
F1  
F2  
F3  
F4  
FN + F1  
FN + F2  
FN + F3  
FN + F4  
Launches the help file supplied with  
the software.  
Decreases the computer's display  
panel brightness in individual steps.  
Increases the computer's display  
panel brightness in individual steps.  
Changes the active display device.  
To use a simultaneous mode, you  
must set the resolution of the internal  
display panel to match the resolution  
of the external display device.  
F5  
FN + F5  
FN + F6  
FN + F7  
FN + F8  
FN + F9  
FN + F10  
FN + F11  
FN + F12  
Enables or disables the Touch Pad.  
Moves media backward.  
F6  
F7  
Plays or pauses media playback.  
Moves media forward.  
F8  
F9  
Decreases the computer's volume.  
Increases the computer's volume.  
Turns the sound on or off.  
F10  
F11  
F12  
Turns the Airplane mode on or off.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-4  
     
Special  
Standard F1-  
Function  
function mode F12 mode  
FN + 1  
FN + 2  
FN + 1  
FN + 2  
Reduces the icon size on the desktop  
or the font sizes within one of the  
supported application windows.  
Enlarges the icon size on the desktop  
or the font sizes within one of the  
supported application windows.  
FN + Space  
FN + Z  
FN + Space  
FN + Z  
Changes the display resolution.  
Turns the keyboard backlight on or  
off. This function is supported with  
some models.  
Some functions will show the toast notification at the edges of the screen.  
Those toast notifications are disabled at factory default. You can enable  
them in the TOSHIBA Function Key application.  
To access it, click Desktop -> Desktop Assist (in taskbar) -> Tools &  
Utilities -> Function Key.  
Windows special keys  
The keyboard provides two keys that have special functions in Windows,  
the Windows Start Button key activates the Start screen while the  
application key has the same function as the secondary (right) mouse  
button.  
This key activates the Windows Start screen .  
This key has the same function as the secondary (right) mouse button.  
Generating ASCII characters  
Not all ASCII characters can be generated using normal keyboard  
operation, but you are able to generate these characters using their  
specific ASCII codes.  
1. Hold down the ALT key.  
2. Using the numeric keypad, type the ASCII code of the character you  
require.  
3. Release ALT - the ASCII character will appear on the display screen.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-5  
   
Optical disc drives  
The computer may be installed with a DVD Super Multi drive, Blu-ray™  
Combo drive or Blu-ray™ Writer drive (BDXL™). When the computer is  
accessing an optical disc, the indicator on the drive glows.  
Formats  
The drives support the following formats.  
DVD Super Multi drive  
The drive supports the following formats: CD-ROM, DVD-ROM, DVD-  
Video, CD-DA, CD-Text, Photo CD™ (single/multi-session), CD-ROM  
Mode 1/Mode 2, CD-ROM XA Mode 2 (Form1, Form2), Enhanced CD (CD-  
EXTRA), Addressing Method 2, DVD-R, DVD-RW, DVD+R, DVD+RW,  
DVD-RAM, DVD-R DL (Format1), DVD+R DL.  
Blu-ray™ Combo drive  
In addition to the above formats, Blu-ray™ Combo drive supports BD-ROM  
and BD-ROM DL.  
Blu-ray™ Writer drive  
In addition to the above formats, Blu-ray™ Writer drive supports BD-R, BD-  
R DL, BD-RE and BD-RE DL.  
Blu-ray™ Writer drive BDXL™  
In addition to the above formats, Blu-ray™ Writer drive BDXL™ supports  
BD-R TL, BD-R QL and BD-RE TL.  
Some types and formats of DVD-R DL and DVD+R DL discs may be  
unreadable.  
Using the optical disc drive  
The full-size drive provides high-performance execution of disc based  
programs. You can run either 12 cm (4.72") or 8 cm (3.15") discs without  
an adaptor.  
Use the DVD playback application to view DVD-Video discs.  
For precautions on writing to discs, refer to the Writing discs section.  
To load discs, follow the steps as detailed below:  
1. When the computer’s power is on, press the eject button to open the  
disc tray slightly.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-6  
 
2. Grasp the disc tray gently and pull until it is fully opened.  
Figure 4-2 Pressing the eject button and pulling the disc tray open  
1
2
1. Eject button  
2. Disc tray  
3. Lay the disc, label side up, in the disc tray.  
Figure 4-3 Inserting a disc  
1
1. Laser lens  
When the disc tray is fully opened, the edge of the computer will cover the  
disc tray slightly. Therefore, you will need to turn the disc at an angle when  
you place it in the disc tray. After seating the disc, however, make sure it  
lies flat.  
Do not touch the laser lens or any portion of its surrounding casing as  
this could cause misalignment.  
Prevent foreign objects from entering the drive. Check the surface of  
the disc tray, especially the area behind the front edge of the disc tray,  
to make sure there are no such objects before closing the drive.  
4. Press gently at the center of the disc until you feel it click into place.  
The disc should lie below the top of the spindle, flush with the spindle  
base.  
5. Push the center of the disc tray to close it. Press gently until it locks  
into place.  
If the disc is not seated properly when the disc tray is closed, the disc might  
be damaged. Also, the disc tray might not open fully when you press the  
eject button.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-7  
Removing discs  
To remove the disc, follow the steps as detailed below:  
Do not press the eject button while the computer is accessing the optical  
disc drive. Wait for the optical disc drive indicator to go out before you open  
the disc tray. Also, if the disc is spinning when you open the disc tray, wait  
for it to stop before you remove it.  
1. To pop the disc tray partially open, press the eject button. Gently pull  
the disc tray out until it is fully opened.  
When the disc tray pops open slightly, wait a moment to make sure the  
disc has stopped spinning before pulling the disc tray fully open.  
2. The disc extends slightly over the sides of the disc tray so you can  
grasp it. Gently lift out the disc.  
3. Push the center of the disc tray to close it. Press gently until it locks  
into place.  
How to remove disc when the disc tray will not open  
Pressing the eject button will not open the disc tray when the computer  
power is off. If the power is off, you can open the disc tray by inserting a  
slender object (about 20 mm) such as a straightened paper clip into the  
manual eject hole near the eject button.  
Figure 4-4 Manual release with the eject hole  
Φ1.0mm  
1
1. Manual eject hole  
Turn off the power before you use the manual eject hole. If the disc is  
spinning when you open the disc tray, the disc could fly off the spindle and  
cause injury.  
Writable discs  
This section describes the types of writable discs. Check the specifications  
of your drive to see the types of discs it can write.  
CDs  
CD-R discs can be written only once. The recorded data cannot be  
erased or changed.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-8  
CD-RW discs including multi speed CD-RW discs, high-speed CD-RW  
discs and ultra-speed CD-RW discs can be recorded more than once.  
DVDs  
DVD-R, DVD+R, DVD-R DL and DVD+R DL discs can be written only  
once. The recorded data cannot be erased or changed.  
DVD-RW, DVD+RW and DVD-RAM discs can be recorded more than  
once.  
Blu-ray™ discs  
BD-R, BD-R DL, BD-R TL and BD-R QL discs can be written only  
once. The recorded data cannot be erased or changed.  
BD-RE, BD-RE DL and BD-RE TL discs can be recorded more than  
once.  
Writing discs  
You can use the DVD Super Multi drive or Blu-ray™ Combo drive to write  
data to either CD-R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD  
+R DL, DVD+RW or DVD-RAM discs.  
You can use the Blu-ray™ Writer drive to write data to either CD-R, CD-  
RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW, DVD-  
RAM, BD-R, BD-R DL, BD-RE or BD-RE DL discs.  
You can use the Blu-ray™ Writer drive BDXL™ to write data to either CD-  
R, CD-RW, DVD-R, DVD-R DL, DVD-RW, DVD+R, DVD+R DL, DVD+RW,  
DVD-RAM, BD-R, BD-R DL, BD-RE, BD-RE DL,BD-R TL, BD-R QL or BD-  
RE TL discs.  
When writing information to media using an optical drive, you should  
always ensure that you connect the AC adaptor to a live electrical outlet. It  
is possible that, if data is written while powered by the battery pack, the  
write process may sometimes fail due to low battery power - in these  
instances data loss may occur.  
Important message  
Before you write or rewrite to any of the media supported by the optical  
disc drive, please read and follow all of the setup and operating instructions  
in this section. If you fail to do so, you may find that the optical disc drive  
may not function properly, and you may fail to write or rewrite information  
successfully - this may cause you to either lose data or incur other damage  
to the drive or media.  
Disclaimer  
TOSHIBA does not assume responsibility for the following:  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-9  
 
Damage to any disc that may be caused by writing or rewriting with  
this product.  
Any change or loss of the recorded contents of media that may be  
caused by writing or rewriting with this product, or for any business  
profit loss or business interruption that may be caused by the change  
or loss of the recorded contents.  
Damage that may be caused by using third party equipment or  
software.  
Given the technological limitations of current optical disc writing drives, you  
may experience unexpected writing or rewriting errors due to disc quality or  
problems with hardware devices. In view of this, it is good practice to make  
two or more copies of important data, in case of any undesired change or  
loss of the recorded contents.  
Before writing or rewriting  
Based on TOSHIBA's limited compatibility testing, we suggest the  
following manufacturers of disc media, however, it must be noted that  
disc quality can affect write or rewrite success rates. Please also be  
aware that in no event does TOSHIBA guarantee the operation,  
quality or performance of any disc.  
CD-R:  
TAIYO YUDEN CO., Ltd.  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
CD-RW: (Multi-Speed, High-Speed and Ultra-Speed)  
MITSUBISHI KAGAKU MEDIA CO., LTD.  
DVD-R:  
DVD Specifications for Recordable Disc for General Version 2.0  
TAIYO YUDEN Co.,Ltd. (for 8x and 16x speed media)  
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media)  
Hitachi Maxell, Ltd. (for 8x and 16x speed media)  
DVD-R DL:  
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media)  
DVD+R:  
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x and 16x speed media)  
TAIYO YUDEN CO., Ltd. (for 8x and 16x speed media)  
DVD+R DL:  
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 8x speed media)  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-10  
DVD-RW:  
DVD Specifications for Recordable Disc for Version 1.1 or version  
1.2  
Victor Company of Japan, Ltd. (JVC) (for 2x, 4x and 6x speed media)  
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 2x, 4x and 6x speed  
media)  
DVD+RW:  
MITSUBISHI KAGAKU MEDIA CO., LTD. (for 4x and 8x speed media)  
DVD-RAM: (DVD Super Multi drive only)  
DVD Specifications for DVD-RAM Disc for Version 2.0, Version 2.1 or  
Version 2.2  
Panasonic Corporation (for 3x and 5x speed media)  
Hitachi Maxell, Ltd. (for 3x and 5x speed media)  
BD-R:  
Panasonic Corporation  
BD-R DL:  
Panasonic Corporation  
BD-RE:  
Panasonic Corporation  
BD-RE DL:  
Panasonic Corporation  
BD-R TL:  
TDK.  
SHARP  
BD-RE TL:  
Panasonic Corporation  
Some types and formats of DVD-R DL and DVD+R DL discs may be  
unreadable.  
Disc created in DVD-R DL format4 (Layer Jump Recording) cannot be  
read.  
When writing or rewriting  
Please observe the following points while you write or rewrite data to a  
media:  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-11  
Always copy data from the hard disk drive to the optical media - do not  
use the cut-and-paste function as the original data will be lost if there  
is a write error.  
Do not perform any of the following actions:  
Change users in the Operating Systems.  
Operate the computer for any other function, including such tasks  
as using a mouse or Touch Pad, or closing/opening the display  
panel.  
Start a communication application.  
Apply impact or vibration to the computer.  
Install, remove or connect external devices, including such items  
as a memory media card, USB device, external monitor or an  
optical digital device.  
Use the audio/video control button to reproduce music or voice.  
Open the optical disc drive.  
Do not use shut down, log off, Sleep Mode or Hibernation Mode  
functions while writing or rewriting.  
Make sure that the write/rewrite operation is completed before going  
into either Sleep Mode or Hibernation Mode (You can remove an  
optical media on the optical disc drive after writing is completed).  
If the media is of poor quality, or is dirty or damaged, writing or  
rewriting errors may occur.  
Set the computer on a level surface and avoid places subject to  
vibration such as airplanes, trains or cars. In addition, do not use the  
computer on an unstable surface such as a stand.  
Keep mobile phones and other wireless communication devices away  
from the computer.  
TOSHIBA VIDEO PLAYER  
Please be aware of the following limitations when you use the TOSHIBA  
VIDEO PLAYER:  
Notes on use  
This software can only be used on Windows 8.  
TOSHIBA VIDEO PLAYER software is supported for playback of DVD  
and video file.  
Frame dropping, audio skipping or out of sync audio and video may  
occur during playback of some video titles.  
Close all other applications when using the TOSHIBA VIDEO  
PLAYER. Do not open any other applications or carry out any other  
operations during video playback. Playback may stop or not function  
properly in some situations.  
Unfinalized DVDs created on home DVD recorders may not be  
playable on the computer.  
Use DVD-Video discs with a region code which is either "the same as  
the factory default setting" (if applicable) or "ALL".  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-12  
 
Do not playback video while watching or recording television programs  
using other applications. Doing so may cause video playback or  
television program recording errors. In addition, if prescheduled  
recording starts during video playback it may cause video playback or  
television program recording errors. Please view video during times  
when there is no recording prescheduled.  
The resume function cannot be used with some discs on the  
TOSHIBA VIDEO PLAYER.  
It is recommended the AC adaptor be connected when playing video.  
Power saving features may interfere with smooth playback. When  
playing video using battery power, set the Power Options to "Balance".  
The screen saver is disabled during video playback using the  
TOSHIBA VIDEO PLAYER. The computer will not automatically go  
into Hibernation, Sleep, or shut-down mode.  
Do not configure the Display automatic power off function to run while  
the TOSHIBA VIDEO PLAYER is running.  
Do not switch to Hibernation or Sleep Mode when running the  
TOSHIBA VIDEO PLAYER.  
Do not lock the computer using the Windows logo (  
when running the TOSHIBA VIDEO PLAYER.  
) + L keys  
The TOSHIBA VIDEO PLAYER does not have a parental control  
function.  
In order to protect copyrights, the Windows Print Screen function is  
disabled when TOSHIBA VIDEO PLAYER is running.  
(Print Screen functions are disabled even when running other  
applications besides TOSHIBA VIDEO PLAYER and when TOSHIBA  
VIDEO PLAYER is minimized.) Please close the TOSHIBA VIDEO  
PLAYER to use the Print Screen function.  
Carry out the installation/uninstallation of the TOSHIBA VIDEO  
PLAYER under a user account with administrator rights.  
Do not change Windows Users while TOSHIBA VIDEO PLAYER is  
running.  
For some DVD or video files, using the control window to change the  
audio track will also change the subtitle track.  
This software can only playback MPEG2, MP4 and WTV files created  
by the preinstalled applications on the same computer. Playback may  
not function properly if you use the files other than these types.  
Display Devices & Audio  
If the video image is not displayed on an external display or television,  
stop the TOSHIBA VIDEO PLAYER, and change the screen  
resolution. To change the screen resolution, click Desktop ->  
Desktop Assist (in taskbar) -> Control Panel -> Appearance and  
Personalization -> Display -> Adjust resolution. However, video  
cannot be output to some external displays and televisions due to  
output or playback conditions.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-13  
When viewing video on an external display or TV, change the display  
device before playing. Video can be played only on internal LCD  
displays or external displays. In Clone mode (Dual View), TOSHIBA  
VIDEO PLAYER may not function properly.  
Do not change the screen resolution while running the TOSHIBA  
VIDEO PLAYER.  
Do not change the display device while running the TOSHIBA VIDEO  
PLAYER.  
Starting TOSHIBA VIDEO PLAYER  
Use the following procedure to start TOSHIBA VIDEO PLAYER.  
1. Insert a DVD-Video in the optical disc drive while the operating system  
is running.  
When a DVD-Video disc is set in the DVD drive (for models with DVD  
drive), TOSHIBA VIDEO PLAYER may start automatically.  
2. Click Desktop -> Desktop Assist (in taskbar) -> Media &  
Entertainment -> TOSHIBA VIDEO PLAYER to start TOSHIBA  
VIDEO PLAYER.  
Operating TOSHIBA VIDEO PLAYER  
Notes on Using TOSHIBA VIDEO PLAYER.  
Screen display and available features may vary amongst videos and  
scenes.  
If the menu is opened in the Display Area using the Control window's  
Top Menu or Menu buttons, touch pad and mouse menu operations  
may not be able to be used.  
Open TOSHIBA VIDEO PLAYER Manual  
TOSHIBA VIDEO PLAYER features and instructions are explained in  
details in TOSHIBA VIDEO PLAYER Manual. Use the following procedure  
to open TOSHIBA VIDEO PLAYER Manual.  
Press the F1 key when TOSHIBA VIDEO PLAYER is launched and click  
the Help button.  
TOSHIBA Blu-ray Disc Player  
Please be aware of the following limitations when you use TOSHIBA Blu-  
ray Disc Player.  
Notes on Use  
This software can only be used on Windows 8.  
Playback of high bit rate content may cause frame dropping, audio  
skipping or decrease in computer performance.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-14  
 
Close all other applications before playing back video. Do not open  
any other applications or carry out any other operations during video  
playback.  
Do not switch to Hibernation or Sleep Mode when running the  
TOSHIBA Blu-ray Disc Player.  
Because Blu-ray Disc™ playback operates according to programs  
built into the content, operation methods, operation screens, sound  
effects, icons and other features may vary from disc to disc. For more  
information on these items refer to instructions included with content  
or contact the content manufacturers directly.  
Make sure to connect the computer's AC adapter when playing a  
video.  
TOSHIBA Blu-ray Disc Player supports AACS (Advanced Access  
Control System) copy protection technology. Renewal of the AACS  
key integrated into this product is required for uninterrupted enjoyment  
of Blu-ray Disc™. An Internet connection is required for renewal.  
AACS key renewal is provided free of charge for 5 years after the  
purchase of this product, however renewal beyond 5 years is subject  
to conditions specified by the software provider, TOSHIBA  
Corporation.  
Do not playback video while recording television programs using other  
applications. Doing so may cause video playback or television  
program recording errors. In addition, if pre-scheduled recording starts  
during video playback it may cause video playback or television  
program recording errors. Please view video during times when there  
is no recording prescheduled.  
While playing a BD-J title, keyboard shortcut is ineffective.  
Resume play function cannot be used with some discs on TOSHIBA  
Blu-ray Disc Player.  
The interactive function on Blu-ray™ discs may not work depending  
on the contents or network situation.  
Blu-ray™ drives and their associated media are manufactured  
according to the specifications of three marketing regions. Region  
codes can be set from TOSHIBA Blu-ray Disc Player. (Click the  
Setting button in the Display Area. And click the Region Menu).  
When you purchase Blu-ray™ Video, make sure it matches your drive,  
otherwise it will not play properly.  
To playback video on an external display or TV using TOSHIBA Blu-  
ray Disc Player, use output devices like external displays or TV that  
have HDCP supported HDMI port. The video cannot be displayed on  
an external display or TV connected to the RGB connector.  
The Blu-ray Disc™ movie can be played only on internal LCD displays  
or external devices connected via an HDMI output. In Clone mode  
(Dual View), TOSHIBA Blu-ray Disc Player may not function properly.  
This product does not play HD DVD discs. Blu-ray™ discs with high  
definition content are required for HD viewing.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-15  
This software can only playback MPEG2, MP4 and WTV files created  
by the preinstalled applications on the same computer. Playback may  
not function properly if you use the files other than these types.  
Starting TOSHIBA Blu-ray Disc Player  
Use the following procedure to start TOSHIBA Blu-ray Disc Player.  
Insert a Blu-ray™ Movie Disc in the optical disc drive while the  
operating system is running.  
When a Blu-ray™ Movie Disc is set in the Blu-ray™ drive (for models  
with Blu-ray™ drive), TOSHIBA Blu-ray Disc Player may start  
automatically.  
Click Desktop -> Desktop Assist (in taskbar) -> Media &  
Entertainment -> TOSHIBA Blu-ray Disc Player.  
Operating TOSHIBA Blu-ray Disc Player  
Notes on using TOSHIBA Blu-ray Disc Player.  
Screen display and available features may vary amongst Blu-ray™  
Videos and scenes.  
If the menu is opened in the Display Area using the Control window's  
Top Menu or Menu buttons, Touch Pad and mouse menu operations  
may not be able to be used.  
Open TOSHIBA Blu-ray Disc Player Manual  
TOSHIBA Blu-ray Disc Player features and instructions are explained in  
details in TOSHIBA Blu-ray Disc Player Manual.  
Use the following procedure to open TOSHIBA Blu-ray Disc Player Manual.  
Press the F1 key when TOSHIBA Blu-ray Disc Player is launched and  
click the Help button.  
3D Playback on an External 3D Device  
3D playback on an external 3D device feature is only provided with some  
models.  
Effect of 3D can be shown only on an external 3D devices connected via  
an HDMI output. It cannot be shown on the internal display. In order for 3D  
playback to work on external display/TV, you need a 3D enabled display/  
TV that has an HDCP compliant HDMI port.  
3D playback feature supports the following resolutions:1920x1080 24Hz  
and 1280x720 60Hz.  
Please change the Screen Resolution to one of the above before using 3D  
playback function.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-16  
 
Important Safety Information for 3D Function  
Please refrain from or stop viewing if you feel ill or experience  
discomfort before or while watching 3D video images.  
Please refrain from viewing 3D video images if you experience  
convulsions, photosensitivity reaction, or heart disease.  
Due to the possibility of impact on vision development, viewers of 3D  
video images should be aged 6 or older. Children and teenagers may  
be more susceptible to health issues associated with viewing in 3D  
and should be closely supervised to avoid prolonged viewing without  
rest.  
Avoid use of the 3D function when under the influence of alcohol.  
Please read the user’s manual that comes with the computer carefully  
before using the 3D playback function.  
The 3D effect differs between individuals.  
Notes on 3D Playback for TOSHIBA VIDEO PLAYER  
TOSHIBA VIDEO PLAYER has 3D playback function, which can playback  
3D video content, and 2D home video content (DVD or video file) in 3D  
using real-time 2Dto3D conversion.  
Effect of 3D can be shown only on an external 3D devices connected  
via an HDMI output. It cannot be shown on the internal display.  
The 2Dto3D conversion function uses TOSHIBA's original algorithm to  
apply a 3D effect to your own 2D videos. However, note that this  
function does not provide the same video content as a video originally  
provided in 3D, and does not create a new video in the 3D format but  
only plays 2D videos in a 3D like mode.  
The 2Dto3D conversion function is meant for the enjoyment of your  
own 2D home video and other 2D contents you created, in 3D  
according to your personal preferences.  
The TOSHIBA VIDEO PLAYER is set by default in the 2D format. By  
pressing the 2Dto3D conversion function button, you decide to  
activate the 2Dto3D conversion function and therefore decide to watch  
your 2D content in 3D. The TOSHIBA VIDEO PLAYER will not run the  
2Dto3D conversion function automatically. Please see the warnings in  
this section as regard to potential copyright infringement and confirm  
you have any necessary authorization.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-17  
The TOSHIBA VIDEO PLAYER is intended for playing DVD-Video,  
DVD-VR and video files and for viewing 2D home video content in 3D.  
The 3D playback of any video content not created by the user may  
require the permission of third parties, where such content is protected  
by copyright. The protection of intellectual property rights is essential  
for TOSHIBA. In this respect, TOSHIBA underlines that the Player  
should not be used in a manner infringing such rights. It is your  
responsibility to ensure that you do not infringe any applicable  
intellectual property laws when you decide to use the Player and,  
more specifically, the 2Dto3D conversion function of the TOSHIBA  
VIDEO PLAYER.  
Some functions are not functionable during 3D playback. In such  
cases, any corresponding buttons will be disabled.  
You may experience some time lag if you perform any of the following  
operations when the “Video Display Window” is at full-screen size.  
Bring up windows such as [Right-Click Menu], [Settings Window],  
[Title/Chapter Search], [File Select] or [Error Message].  
Operate on Windows  
Operate on other applications  
Please make sure AC adapter is used when playing with the enabled  
3D playback feature.  
3D playback occurs only in full-screen size. When you enable 3D  
playback, the “Video Display Window” automatically enlarges to  
fullscreen size.  
In order for 3D playback to work on external display/TV, you need a  
3D enabled display/TV that has an HDCP compliant HDMI port.  
3D video content can only be displayed on external display using  
HDMI "with 3D".  
The 3D effect differs among individuals.  
Viewing 3D playback may cause discomfort. In this case, please stop  
viewing and consult your doctor.  
Please consider if it is suitable or a need for time limit before allowing  
your child to watch a 3D content.  
Depending on the lighting condition of your room, you may experience  
some flickerings when you have the 3D glasses on.  
Upconvert and 3D Playback functions cannot be used at the same  
time. Switching to 3D playback while upconvert is running will cause  
the upconvert function to switch off automatically.  
Depending on the video content, it might not be able to playback in  
3D.  
Only Side-by-Side and Interleave 3D video formats are supported for  
playback of 3D video content.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-18  
Notes on 3D Playback for TOSHIBA Blu-ray Disc Player  
The 3D playback function can playback 3D video content, and your 2D  
home video content and other 2D content created by you (DVD or video  
file) in 3D using real-time 2Dto3D conversion.  
The 3D playback function CANNOT be used to playback 2D video  
contents of Blu-ray Disc or AVCHD in 3D using real-time 2Dto3D  
conversion.  
The Player's 3D playback function is meant for only personal home  
use. Please take note that applicable copyright laws may prohibit the  
public display when you offer 3D viewing of third party video contents  
to unidentified personels or mass public.  
The 2Dto3D conversion function uses TOSHIBA's original algorithm to  
apply a 3D effect to your own 2D videos. However, note that this  
function does not provide the same video content as a video originally  
provided in 3D, and does not create a new video in the 3D format but  
only plays 2D videos in a 3D like mode.  
The picture generated by 2Dto3D conversion function is not the same  
as a picture produced for 3D playback use. The 2Dto3D conversion  
function simply uses TOSHIBA's original algorithm to apply pseudo 3D  
effect to the 2D content.  
The Player is set by default in the 2D format. By pressing the 2Dto3D  
conversion function button, you decide to activate the 2Dto3D  
conversion function and therefore decide to watch your 2D content in  
3D. The Player will not run the 2Dto3D conversion function  
automatically. Please see the warnings in this section as regards  
potential copyright infringement and confirm you have any necessary  
authorization.  
The Player is intended for playing DVD-Video, DVD-VR and video files  
and for viewing 2D home video content and other 2D content created  
by you in 3D. The 3D playback of any video content not created by the  
user may require the direct or indirect permission of third parties,  
where such content is protected by copyright, unless otherwise  
permitted under applicable law. The protection of intellectual property  
rights is essential for TOSHIBA. In this respect, TOSHIBA underlines  
that the Player should not be used in a manner infringing such rights.  
It is your responsibility to ensure that you do not infringe any  
applicable intellectual property laws when you decide to use the  
Player and, more specifically, when you decide to activate the 2Dto3D  
conversion function of the Player.  
Some functions cannot be used during 3D playback. In such cases,  
any buttons used for those functions may be disabled.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-19  
Depending on the system environment, the player may automatically  
switch into 2D if you perform any of the following operations during 3D  
playback. Furthermore, you may experience some time lag when the  
switching occurs.  
- Opening windows or pop-ups such as [Right-Click Menu], [Settings  
Window], [File Select] or [Error Message].  
- Using Windows features.  
- Using any other applications.  
Please make sure to use AC adapter when playing with 3D playback  
feature enabled.  
Depending on the system environment, 3D playback may only be  
used when the "Video Display Window" is at full-screen. 3D playback  
may not function when windowed.  
In order for the 3D playback to work on an external display/TV, you  
need a 3D enabled display/TV that has an HDCP compliant HDMI  
port.  
3D video content can only be displayed on an external display  
connected using HDMI "with 3D".  
3D Settings can be changed on the "Settings" Screen, but the default  
settings are highly recommended. Changing the settings may cause  
the 3D stereoscopic effect to become stronger, which in turn may  
cause eye fatigue.  
The 3D effect differs between individuals. Please refrain from or stop  
viewing and check your equipment settings, if you can see doubly-  
substituted video images or cannot feel the 3D stereoscopic effect  
when watching 3D video images. Still, if you cannot see correctly,  
please refrain from or stop viewing.  
Please refrain from or stop viewing if you feel ill or experience  
discomfort before or while watching 3D video images.  
Please position yourself directly in front of the display when watching  
3D video images. And please take regular breaks in between.  
Due to the possibility of impact on vision development, viewers of 3D  
video images should be aged 6 or older.  
Please consider whether it is suitable or is there a need for limiting the  
viewing time before allowing your child to watch a 3D content.  
This software does not have parental lock for 3D video viewing.  
Please use the login-password functions of Windows if you are  
worried about the effect of 3D playback on your child's visual function.  
This software can playback MPEG2, MP4, and WTV files. Your own  
2D video contents recorded using home video camcorder and other  
content created by you can be played in either 2D, or 3D using real-  
time 2Dto3D conversion. As for playback of 3D video content, only  
Side-by-Side and Interleave 3D video formats are supported.  
Not all files can be played.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-20  
Battery  
This section explains battery types, use, recharging methods and handling.  
Battery types  
The computer has different types of batteries.  
Battery pack  
When the AC adaptor is not connected, the computer's main power source  
is a removable lithium ion battery pack, also referred to in this manual as  
the main battery. You can purchase additional battery packs for extended  
use of the computer away from an AC power source although you should  
not change the battery pack while the AC adaptor is connected.  
Before you remove the battery pack, save your data and shut down the  
computer, or place the computer into Hibernation Mode. Please be aware  
that, when placing the computer into Hibernation Mode, the contents of  
memory will be saved to the hard disk drive, although for safety sake, it is  
best to also save your data manually.  
Real Time Clock (RTC) battery  
The Real Time Clock (RTC) battery provides power for the internal real  
time clock and calendar function and also maintains the system  
configuration while the computer is turned off. If the RTC battery becomes  
completely discharged, the system will lose this information and the real  
time clock and calendar will stop working.  
You can change the Real Time Clock settings in the BIOS setup utility.  
Please refer to Troubleshooting for further information.  
Care and use of the battery pack  
This section provides the important safety precautions in order to handle  
your battery pack properly.  
Refer to the enclosed Instruction Manual for Safety and Comfort for  
detailed precautions and handling instructions.  
Make sure the battery is securely installed in the computer before  
attempting to charge the battery pack. Improper installation could  
generate smoke or fire, or cause the battery pack to rupture.  
Keep the battery pack out of reach of infants and children. It can  
cause injury.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-21  
     
The lithium ion battery pack can explode if not replaced, used,  
handled or disposed of properly. Dispose of the battery as required by  
local ordinances or regulations. Use only batteries recommended by  
TOSHIBA as replacements.  
The computer's RTC battery is a lithium battery and should be  
replaced only by your dealer or by a TOSHIBA service representative.  
The battery can explode if not properly replaced, used, handled or  
disposed. Dispose of the battery as required by local ordinances or  
regulations.  
Charge the battery pack only in an ambient temperature between 5  
and 35 degrees Celsius. Otherwise, the electrolyte solution might leak,  
battery pack performance might deteriorate and the battery life might  
be shortened.  
Never install or remove the battery pack without first turning off the  
power and disconnecting the AC adaptor. Never remove the battery  
pack while the computer is in Sleep Mode. Data could be lost.  
Never remove the battery pack while the Wake-up on LAN function is  
enabled, as data will be lost. Before you remove a battery pack, disable the  
Wake-up on LAN function.  
Charging the batteries  
When the power in the battery pack becomes low, the DC IN/Battery  
indicator will flash amber to indicate that only a few minutes of battery  
power remain. If you continue to use the computer while the DC IN/Battery  
indicator flashes, the computer will enable Hibernation Mode so that you do  
not lose any data, and automatically turn itself off.  
You must recharge a battery pack when it becomes discharged.  
Procedures  
To recharge a battery pack, connect the AC adaptor to the DC IN 19V jack  
and plug the other end into a working outlet - the DC IN/Battery indicator  
will glow amber while the battery is being charged.  
Use only the computer connected to an AC power source or optional  
TOSHIBA Battery charger to charge the battery pack. Never attempt to  
charge the battery pack with any other charger.  
Charging Time  
The following table shows the approximate time required to fully charge a  
discharged battery.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-22  
Battery type  
Power off  
Power on  
Battery pack  
About 3 hours max  
About 3~5 hours  
(24Wh, 3 cell)  
Battery pack  
About 3 hours max  
About 4 hours max  
About 3~5 hours  
About 4~6 hours  
(48Wh, 6 cell)  
Battery pack  
(66Wh, 6 cell high  
capacity)  
Please be aware that the charging time when the computer is on is affected  
by ambient temperature, the temperature of the computer and how you are  
using the computer - if you make heavy use of external devices for  
example, the battery might scarcely charge at all during operation.  
Battery charging notice  
The battery may not begin charging immediately under the following  
conditions:  
The battery is extremely hot or cold (if the battery is extremely hot, it  
might not charge at all). To ensure the battery charges to its full  
capacity, you should charge it at room temperature of between 5°C to  
35°C (41°F to 95°F).  
The battery is nearly completely discharged. In this instance you  
should leave the AC adaptor connected for a few minutes and the  
battery should begin charging.  
The DC IN/Battery indicator may show a rapid decrease in battery  
operating time when you try to charge a battery under the following  
conditions:  
The battery has not been used for a long time.  
The battery has completely discharged and been left in the computer  
for a long time.  
In such cases you should follow the steps as detailed below:  
1. Fully discharge the battery by leaving it in the computer with the power  
on until the system automatically turns itself off.  
2. Connect the AC adaptor to the DC IN 19V jack of the computer, and to  
a wall outlet that is supplying power.  
3. Charge the battery until the DC IN/Battery indicator glows white.  
Repeat these steps two or three times until the battery recovers normal  
capacity.  
Monitoring battery capacity  
Remaining battery power can be monitored using the following methods.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-23  
 
Clicking the battery icon on the Taskbar  
Via the Battery Status in the Windows Mobility Center window  
You should wait at least 16 seconds after turning on the computer  
before trying to monitor the remaining operating time. This is because  
the computer needs this time to check the battery's remaining capacity  
and then calculate the remaining operating time, based on this  
together with the current power consumption.  
Please be aware that the actual remaining operating time may differ  
slightly from the calculated time.  
With repeated discharges and recharges, the battery's capacity will  
gradually decrease. In view of this it will be noted that an often used,  
older battery will not operate for as long as a new battery even when  
both are fully charged.  
Maximizing battery operating time  
A battery's usefulness depends on how long it can supply power on a  
single charge, while how long the charge lasts in a battery depends on:  
Processor speed  
Screen brightness  
System Sleep Mode  
System Hibernation Mode  
Display power off period  
Hard Disk Drive power off period  
How often and for how long you use the Hard Disk Drive and external  
disk drives, for example, optical disc.  
How much charge the battery contained to begin with.  
How you use optional devices, such as a USB device, to which the  
battery supplies power.  
Whether you enable Sleep Mode, which can conserve battery power if  
you are frequently turning the computer off and on.  
Where you store your programs and data.  
Whether you close the display panel when you are not using the  
keyboard - closing the display saves power.  
The environmental temperature - operating time decreases at low  
temperatures.  
The condition of the battery terminals - you should always ensure the  
terminals stay clean by wiping them with a clean dry cloth before  
installing the battery pack.  
Whether you enable Sleep and Charge function.  
Batteries exhausted time  
When you turn off the power of your computer with batteries fully charged,  
the batteries will be exhausted within the following approximate period.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-24  
Battery type  
Sleep Mode  
Shut Down Mode  
Battery pack  
About 2 days  
About 22 days  
(24Wh, 3 cell)  
Battery pack  
About 4 days  
About 43 days  
About 60 days  
(48Wh, 6 cell)  
Battery pack  
About 5.5 days  
(66Wh, 6 cell high  
capacity)  
Extending battery life  
To maximize the life of your battery packs:  
At least once a month, disconnect the computer from a power source and  
operate it on battery power until the battery pack fully discharges. Before  
doing so, follow the steps as detailed below.  
1. Turn off the computer's power.  
2. Disconnect the AC adaptor and turn on the computer's power - if it  
does not turn on then go to Step 4.  
3. Operate the computer on battery power for five minutes. If you find  
that the battery pack has at least five minutes of operating time,  
continue operating until the battery pack is fully discharged, however, if  
the DC IN/Battery indicator flashes or there is some other warning to  
indicate a low battery condition, go to Step 4.  
4. Connect the AC adaptor to the DC IN 19V jack of the computer, and  
to a wall outlet that is supplying power. The DC IN/Battery indicator  
should glow amber to indicate that the battery pack is being charged,  
however, in the event that DC IN/Battery indicator does not glow this  
indicates that power is not being supplied - check the connections for  
the AC adaptor and the power cord.  
5. Charge the battery pack until the DC IN/Battery indicator glows  
white.  
Replacing the battery pack  
Please be aware that the battery pack is classified as a consumable item.  
The operating life of the battery pack will gradually reduce through  
repeated charging and discharging, and will need to be replaced when it  
reaches the end of its operating life. In addition to this, you might also  
replace a discharged battery pack with a charged spare when you are  
operating your computer away from an AC power source for an extended  
period of time.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-25  
     
This section explains how to remove and install the battery pack, and  
begins with the removal process which is detailed through the following  
steps.  
Do not remove the battery pack while the computer is in Sleep Mode.  
Data is stored in RAM, so if the computer loses power it could be lost.  
In Hibernation Mode, data will be lost if you remove the battery pack or  
disconnect the AC adaptor before the save is completed.  
Do not touch the battery release latch while holding the computer or  
the battery pack might fall out due to the unintentional release of the  
battery release latch and cause injuries.  
Removing the battery pack  
To remove a discharged battery, follow the steps as detailed below:  
1. Save your work.  
2. Click Power in the Settings charm, and then click Shut down while  
holding down the SHIFT key - ensure that the Power indicator is off.  
3. Remove all cables and peripherals that are connected to the  
computer.  
4. Close the display panel and turn the computer upside down.  
5. Slide the battery lock into its unlock ( ) position.  
6. Slide and hold the battery release latch to disengage the battery pack  
and then lift it up to remove it from the computer.  
Figure 4-5 Releasing the battery pack -1  
3
1
2
3
1
2
Figure 4-6 Releasing the battery pack -2  
1. Battery lock  
2. Battery release latch  
3. Battery pack  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-26  
Installing the battery pack  
To install a battery pack, follow the steps as detailed below:  
Do not touch the battery release latch while holding the computer or the  
battery pack might fall out due to the unintentional release of the battery  
release latch and cause injuries.  
1. Insert the battery pack as far as it will go into the computer.  
2. Ensure that the battery pack is securely in place and the battery lock is  
in its locked position.  
3. Turn your computer over.  
LAN  
The computer has built-in support for Ethernet LAN (10 megabits per  
second, 10BASE-T), Fast Ethernet LAN (100 megabits per second,  
100BASE-TX) or Gigabit Ethernet LAN (1000 megabits per second,  
1000BASE-T).  
This section describes how to connect/disconnect to a LAN.  
Do not install or remove a memory module while Wake-up on LAN is  
enabled.  
The Wake-up on LAN function consumes power even when the  
system is off. Leave the AC adaptor connected while using this  
feature.  
The Link speed (10/100/1000 megabits per second) changes  
automatically depending on the network conditions (connected device,  
cable or noise and so on).  
LAN cable types  
The computer must be configured properly before connecting to a LAN.  
Logging onto a LAN using the computer’s default settings could cause a  
malfunction in LAN operation. Check with your LAN administrator regarding  
set-up procedures.  
If you are using Gigabit Ethernet LAN (1000 megabits per second,  
1000BASE-T), be sure to connect with a CAT5e cable or higher. You  
cannot use a CAT3 or CAT5 cable.  
If you are using Fast Ethernet LAN (100 megabits per second, 100BASE-  
TX), be sure to connect with a CAT5 cable or higher. You cannot use a  
CAT3 cable.  
If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you  
can connect with a CAT3 or higher cable.  
User's Manual  
4-27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting the LAN cable  
To connect the LAN cable, follow the steps as detailed below:  
Connect the AC adaptor before connecting the LAN cable. The AC  
adaptor must remain connected during LAN use. If you disconnect the  
AC Adaptor while the computer is accessing a LAN, the system may  
hang up.  
Do not connect any other cable to the LAN jack except the LAN cable.  
Otherwise, malfunctions or damage may occur.  
Do not connect any power supplying device to the LAN cable that is  
connected to the LAN jack. Otherwise, malfunctions or damage may  
occur.  
1. Turn off the power to all external devices connected to the computer.  
2. Plug one end of the cable into the LAN jack. Press gently until you  
hear the latch click into place.  
Figure 4-7 Connecting the LAN cable  
2
1
1. LAN jack  
2. LAN cable  
3. Plug the other end of the cable into a LAN hub connector or router.  
Check with your LAN administrator and hardware or software vendor  
before using or configuring a network connection.  
Additional memory module  
You can install additional memory into the computer in order to increase  
the amount of system memory that is available. This section describes how  
to install and remove optional memory modules.  
You should place a mat beneath the computer in order to prevent the  
computer's lid from becoming scratched or damaged when you are  
installing/replacing the memory module. In this instance you should  
avoid mats that are made of materials that hold or generate static  
electricity.  
When installing or removing a memory module, you must ensure that  
you do not touch any other internal areas of the computer.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-28  
   
Use only memory modules approved by TOSHIBA.  
Do not try to install or remove a memory module under the following  
conditions.  
a. The computer is turned on.  
b. The computer was shut down in either Sleep or Hibernation Mode.  
c. Wake-up on LAN is enabled.  
d. The wireless communication function is on.  
Be careful not to let screws or other foreign matter fall into the  
computer. It could cause malfunction or electric shock.  
Additional memory module is a precision electronic component that  
may be fatally damaged by static electricity. Since the human body  
can carry static electricity, it is important that you discharge yourself  
before touching or installing any additional memory modules. To  
discharge your body’s static electricity, simply touch any metal close to  
you with bare hands.  
Use a point size 0 Phillips screwdriver to remove and fasten the screws -  
the use of an incorrect screwdriver can damage the screw heads.  
Installing memory module  
To install memory module, follow the steps as detailed below:  
1. Click Power in the Settings charm, and then click Shut down while  
holding down the SHIFT key - ensure that the Power indicator is off.  
2. Remove the AC adaptor and all cables and peripherals connected to  
the computer.  
3. Close the display panel.  
4. Turn the computer upside down and remove the battery pack (refer to  
Replacing the battery pack section, if required).  
5. Loosen the screw securing the memory module cover in place -  
please note that the screw is attached to the cover in order to prevent  
it from being lost.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-29  
 
6. Slide your fingernail or a thin object under the cover and lift it off.  
Figure 4-8 Removing the memory module cover  
1
2
1. Screw  
2. Memory module cover  
Product appearance depends on the model you purchased.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-30  
7. Align the notch of the memory module with that of the memory slot  
and gently insert the module into the slot at about a 30 degree angle  
before holding it down until the latches on either side snap into place.  
Figure 4-9 Seating the memory module  
1
2
3
1. Notch  
2. Upper slot  
3. Lower slot  
Product appearance depends on the model you purchased.  
Never allow metal objects, such as screws, staples and paper clips, to  
enter the computer. Foreign metal objects can create a short circuit,  
which can cause computer damage and fire, possibly resulting in  
serious injury.  
Do not touch the connectors on the memory module or on the  
computer. Debris on the connectors may cause memory access  
problems.  
The lower slot is reserved for the first memory module. Use the upper  
slot for expanded memory. If only one module is installed, use the  
lower slot .  
Align the grooves along the edges of the memory module with the  
locking tabs on the connector and insert the module into the connector  
firmly - if you find it difficult to install the memory module, gently prise  
the locking tabs outwards using the tip of your finger.  
Please also ensure that you hold the memory module along its left and  
right hand edges - the edges with the grooves in.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-31  
8. Seat the memory module cover in place and secure it with the screw.  
Take care to ensure that the memory module cover is firmly closed.  
Figure 4-10 Seating the memory module cover  
2
1
1. Memory module cover  
2. Screw  
Product appearance depends on the model you purchased.  
9. Install the battery pack - refer to Replacing the battery pack section, if  
required.  
10. Turn your computer over.  
11. Turn the computer on and make sure the added memory is recognized  
- to confirmed it, click Desktop -> Desktop Assist (in taskbar) ->  
Control Panel -> System and Security -> System.  
Removing memory module  
To remove the memory module, follow the steps as detailed below:  
1. Click Power in the Settings charm, and then click Shut down while  
holding down the SHIFT key - ensure that the Power indicator is off.  
2. Remove the AC adaptor and all cables and peripherals connected to  
the computer.  
3. Close the display panel.  
4. Turn the computer upside down and remove the battery pack.  
5. Loosen the screw securing the memory module cover in place -  
please note that the screw is attached to the cover in order to prevent  
it from being lost.  
6. Slide your fingernail or a thin object under the cover and lift it off.  
7. Push the latches away from the module in order to release it - a spring  
will force one end of the module up at an angle.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-32  
 
8. Grasp the module by its edges and remove it from the computer.  
If you use the computer for a long time, the memory modules and the  
circuits locating close to the memory modules will become hot. In this  
case, let them cool to room temperature before you replace them. Or  
you will get burnt if you touch any of them.  
Do not touch the connectors on the memory module or on the  
computer. Debris on the connectors may cause memory access  
problems.  
Figure 4-11 Removing the memory module  
2
1
1
3
1. Latches  
Product appearance depends on the model you purchased.  
9. Seat the memory module cover in place and secure it with the screw.  
Take care to ensure that the memory module cover is firmly closed.  
10. Install the battery pack.  
11. Turn the computer over.  
Memory media  
The computer is equipped with a memory media slot that can  
accommodate some kinds of memory media with various memory  
capacities so that you can easily transfer data from devices, such as digital  
cameras and Personal Digital Assistants.  
Keep foreign objects out of the memory media slot. Never allow metal  
objects, such as screws, staples and paper clips, to enter the computer or  
Keyboard. Foreign metal objects can create a short circuit, which can  
cause computer damage and fire, possibly resulting in serious injury.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-33  
   
Please note that an adaptor is required to use miniSD/microSD Card.  
Please note that not all memory media have been tested and verified  
to work correctly. Therefore, it is not possible to guarantee that all  
memory media will operate properly.  
The slot does not support Magic Gate functions.  
Figure 4-12 Examples of memory media  
Secure Digital (SD) Card  
MultiMediaCard (MMC)  
microSD card adaptor and  
microSD card  
Points to note about the memory media card  
SD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music  
Initiative), which is a technology adopted to prevent unlawful copy or  
playback of digital music. For this reason, you cannot copy or playback  
protected material on another computer or other device, and you may not  
reproduce any copyrighted material except for your personal enjoyment.  
Below is a simple explanation for distinguishing SD memory cards from  
SDHC memory cards and SDXC memory cards.  
SD, SDHC and SDXC memory cards appear the same externally.  
However, the logo on memory cards is different, so pay careful  
attention to the logo when purchasing.  
The SD memory card logo is (  
The SDHC memory card logo is (  
The SDXC memory card logo is (  
).  
).  
).  
The maximum capacity of SD memory cards is 2GB. The maximum  
capacity of SDHC memory cards is 32GB. The maximum capacity of  
SDXC memory cards is 64GB.  
Memory media format  
New media cards are formatted according to specific standards. If you wish  
to reformat a media card, be sure to do so with a device that uses media  
cards.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-34  
 
Formatting a memory media card  
Memory media cards are sold already formatted in conformity to specific  
standards. If you reformat a memory card, be sure to reformat it with a  
device such as digital camera or digital audio player that uses the memory  
cards, not with the format command provided within Windows.  
Should you need to format all areas of the memory card, including the  
protected area, you will need to obtain an appropriate application that  
applies the copy protection system.  
Media care  
Observe the following precautions when handling the card.  
Do not twist or bend cards.  
Do not expose cards to liquids or store in humid areas or lay media  
close to containers of liquid.  
Do not touch the metal part of a card or expose it to liquids or let it get  
dirty.  
After using card, return it to its case.  
The card is designed so that it can be inserted only one way. Do not  
try to force the card into the slot.  
Do not leave a card partially inserted in the slot. Press the card until  
you hear it click into place.  
Set the write-protect switch to the lock position, if you do not want to  
record data.  
Memory cards have a limited lifespan, so it is important to backup  
important data.  
Do not write to a card if the battery power is low. Low power could  
affect writing accuracy.  
Do not remove a card while read/write is in progress.  
For more details on using memory cards, see manuals accompanying the  
cards.  
About the write-protect feature  
Memory media cards have a write-protect function.  
SD Card (SD memory card, SDHC memory card and SDXC memory  
card)  
Set the write-protect switch to the lock position, if you do not want to record  
data.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-35  
     
Inserting memory media  
The following instructions apply to all types of supported media devices. To  
insert memory media, follow the steps as detailed below:  
1. Turn the memory media so that the contacts (metal areas) face down.  
2. Insert the memory media into the memory media slot on the front of  
the computer.  
3. Press the memory media gently to ensure a firm connection is made.  
The memory media will be partially out of the slot.  
Figure 4-13 Inserting memory media  
2
1
1. Memory media slot  
2. Memory media  
Make sure the memory media is oriented properly before you insert it.  
If you insert the media in wrong direction, you may not be able to  
remove it.  
When inserting the memory media, do not touch the metal contacts.  
You could expose the storage area to static electricity, which can  
destroy data.  
Do not turn the computer off or switch to Sleep Mode or Hibernation  
Mode while files are being copied - doing so may cause data to be  
lost.  
Removing memory media  
The following instructions apply to all types of supported media devices. To  
remove memory media, follow the steps as detailed below:  
1. Click the Desktop tile and open the Safely Remove Hardware and  
Eject Media icon on the Windows Taskbar.  
2. Select memory media.  
3. Grasp the media and remove it.  
If you remove the memory media or turn off the power while the  
computer is accessing the memory media, you may lose data or  
damage the media.  
Do not remove the memory media while the computer is in Sleep or  
Hibernation Mode. The computer could become unstable or data in  
the memory media could be lost.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-36  
   
Do not remove only the miniSD/microSD Card while leaving the  
adaptor in the memory media slot.  
External Display  
Your computer video capabilities can be enhanced with additional displays.  
External displays allows you to share your desktop or extend the desktop  
area.  
Connecting an external display  
Your computer comes with a built-in display, but you can also connect  
other external displays via available ports on the computer.  
Some models may include the Triple Monitor function that can display  
image on Triple Monitor independently.  
External RGB monitor port  
An external analog monitor can be connected to the External RGB monitor  
port on the computer. To connect an external analog monitor, follow the  
steps as detailed below:  
1. Connect the RGB cable to the External RGB monitor port.  
Figure 4-14 Connecting the RGB cable to the External RGB monitor port  
2
1
1. External RGB monitor port  
2. RGB cable  
There are no fastening screws for an external monitor cable on the  
External RGB monitor port. However, external monitor cables which have  
connectors with fastening screws can still be used.  
2. Turn the external monitor's power on.  
When you turn on the power, the computer will automatically recognize the  
monitor and determine whether it is a color or monochrome device.  
When displaying desktop on an external analog monitor, desktop is  
sometimes displayed on the center of the monitor with black bars around  
desktop (with small size).  
At that time, please read the manual of the monitor and set the display  
mode which is supporting at the monitor. Then it will be displayed with  
suitable size with correct aspect ratio.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-37  
 
The HDMI out port  
HDMI (High-Definition Multimedia Interface) port digitally transfers both  
video and audio data without reducing the quality. HDMI-compatible  
external display devices including televisions can be connected via the  
HDMI port.  
To connect an HDMI-compatible display device, follow the steps as  
detailed below:  
As the port operation of all HDMI display devices have not been confirmed,  
some HDMI display devices may not function properly.  
To connect a device to the HDMI out port, you must purchase an HDMI  
cable.  
1. Plug one end of the HDMI cable into the HDMI in port of the HDMI  
display device.  
2. Plug the other end of the HDMI cable into the HDMI out port on your  
computer.  
3. Turn the HDMI display device’s power on.  
Figure 4-15 Connecting the HDMI out port  
1
2
1. HDMI out port  
2. HDMI cable  
Please do not plug/unplug an HDMI device under the following conditions:  
The system is starting up.  
The system is shutting down.  
When you connect a television or external monitor to the HDMI port, the  
display output device is set to HDMI.  
When you unplug the HDMI cable and re-plug it, please wait at least 5  
seconds before you re-plug the HDMI cable again.  
When you change the display output device, the playback device may not  
switch automatically. In this case, in order to set the playback device to the  
same device as the display output device, please adjust the playback  
device manually by the following steps:  
1. Click Desktop -> Desktop Assist (in taskbar) -> Control Panel ->  
Hardware and Sound -> Sound.  
2. In the Playback tab, select the playback device which you want to  
switch to.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-38  
3. To use the internal speakers on your computer, select Speakers. To use  
the television or the external monitor that you have connected to the  
computer, select a different playback device.  
4. Click the Set Default button.  
5. Click OK to close the Sound dialog.  
Settings for display video on HDMI  
To view video on the HDMI display device, be sure to configure the  
following settings otherwise you may find that nothing is displayed.  
Be sure to use the function key to select the display device before starting  
to play video. Do not change the display device while playing video.  
Do not change the display device under the following conditions.  
While data is being read or written.  
While communication is being carried out.  
Selecting HD Format  
To select the display mode, follow the steps as detailed below:  
1. Click Desktop -> Desktop Assist (in taskbar) -> Control Panel.  
2. Click Appearance and Personalization.  
3. Click Display.  
4. Click Change display settings.  
5. Click Advanced settings.  
6. Click List All Modes.  
7. Select one of the mode at List All Modes.  
Wireless display  
Some models support Intel Wireless Display (Intel WiDi), a wireless  
technology which utilizes Wi-Fi to allow the computer to be wirelessly  
connected to external displays including TVs as extended screens. With  
Intel WiDi, documents, streamed/local media contents or other online  
contents can be shared wirelessly with others.  
To use Intel WiDi, either one of the following devices is required:  
A compatible external display with built-in support for Intel WiDi.  
An external display with HDMI port and a digital adaptor featuring Intel  
WiDi.  
The adaptor is a device that connects to the external display via HDMI  
port and can receive Wi-Fi signals from your computer.  
Type "Intel WiDi" from the Start screen and click Intel(R) WiDi. Intel WiDi  
application will launch and you are ready to start the connection.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-39  
To learn more details on how to complete the connection, please refer to  
the application help.  
Some copy protected media contents may not play on the external displays  
via Intel WiDi.  
Changing the display settings  
After one or more external displays are connected, the operating system  
can automatically detect, identify and setup the display settings.  
You can also manually manage how the external displays will work and  
change the display settings by pressing P while holding down the  
Windows (  
) key. If you disconnect the external display before you turn  
the computer's power off, be sure to switch to the internal display.  
Security lock  
A security lock enables you to anchor your computer to a desk or other  
heavy object in order to help prevent unauthorized removal or theft. The  
computer has a security lock slot on its right side into which you can attach  
one end of the security cable, while the other end attaches to a desk or  
similar object. The methods used for attaching security cables differ from  
product to product. Please refer to the instructions for the product you are  
using for more information.  
Connecting the security lock  
In order to connect a security cable to the computer, follow the steps as  
detailed below:  
1. Turn the computer so its right side faces you.  
2. Align the security cable with the lock slot and secure it in place.  
Figure 4-16 Security lock  
2
1
1. Security lock slot  
2. Security lock  
Optional TOSHIBA Accessories  
You are able to add a number of options and accessories in order to make  
your computer even more powerful and convenient to use. For reference,  
the following list details some of the items that are available from your  
reseller or TOSHIBA dealer:  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-40  
     
Memory Kit  
DDR3/DDR3L-1600/1866 memory modules can  
easily be installed in the computer.  
The available option memory depends on  
TOSHIBA authorization.  
Universal AC Adaptor If you frequently use your computer at more than  
one site, it may be convenient to purchase an  
additional AC adaptor to be kept at each site in  
order to remove the need to always carry the  
adaptor with you.  
Battery pack  
An additional battery pack can be purchased for  
use as either a spare or replacement. Please  
refer to the Battery section for further information.  
Sound System and Video mode  
This section describes some of the audio control functions.  
Volume Mixer  
The Volume Mixer utility lets you control the audio volume for playback of  
devices and applications under Windows.  
To launch the Volume Mixer utility, click Desktop and right click on the  
speaker icon on the Taskbar, and then select Open Volume Mixer  
from the sub menu.  
To adjust the volume level of speakers or headphones, move the  
Speakers slider.  
To adjust the volume level of an application that you are using, move  
the slider for the corresponding application.  
Microphone Level  
Follow the steps below to change the microphone recording level.  
1. Right click on the speaker icon on the Taskbar, and select Recording  
devices from the sub menu.  
2. Select Microphone, and click Properties.  
3. On the Levels tab move the Microphone slider to increase or  
decrease the microphone volume level.  
If you feel the microphone volume level is inadequate, move the  
Microphone Boost slider to a higher level.  
DTS Studio Sound  
DTS Studio Sound™ is a premium audio enhancement suite that utilizes  
revolutionary audio technology to provide the most immersive and realistic  
listening experience ever offered for a two speaker playback environment.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-41  
   
DTS Studio Sound is provided with some models. It provides the following  
features:  
Advanced audio rendering to match 2D and 3D video content for  
enveloping surround sound  
Accurate placement of audio cues for immersive surround sound from  
any PC speaker configuration laptop/desktop speakers or headphones  
Broad sweet spot with elevated sound image  
Maximum volume output delivering maximum volume without creating  
clipping or distortion  
Dialog enhancement for clear and intelligible vocals  
Bass enhancement for rich, low frequency production  
High frequency definition for crisp details  
Consistent volume level across content  
To access the utility, Click Desktop -> Desktop Assist (in taskbar) ->  
Media & Entertainment -> DTS Studio Sound.  
U.S. patents apply to this product. See http://patents.dts.com.  
Manufactured under license from DTS Licensing Limited.  
DTS Sound  
DTS Sound™ utilizes advanced patented techniques to retrieve audio cues  
buried in the original source material and deliver immersive surround sound  
complete with deep, rich bass and crystal clear dialog.  
DTS Sound is provided with some models. It provides the following  
features:  
Immersive surround sound with bass and dialog enhancement  
Broad sweet spot with elevated sound image  
Improved volume output delivering maximum volume without creating  
clipping or distortion  
Dialog enhancement for clear and intelligible vocals  
Bass enhancement for rich, low frequency production  
High frequency definition for crisp details  
To access the utility, Click Desktop -> Desktop Assist (in taskbar) ->  
Media & Entertainment -> DTS Sound.  
U.S. patents apply to this product. See http://patents.dts.com.  
Manufactured under license from DTS Licensing Limited.  
Video mode  
Video mode settings are configured via the Screen Resolution dialog.  
To open the Screen Resolution dialog, click Desktop -> Desktop Assist  
(in taskbar) -> Control Panel -> Appearance and Personalization ->  
Display -> Change display settings.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-42  
 
If you are running some applications (for example a 3D application or video  
playback), you may see some disturbance, flickering or frame dropping on  
your screen.  
If that occurs, adjust the resolution of display, lowering it until the screen is  
displayed properly.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-43  
Chapter 5  
Utilities and Advanced Usage  
This chapter describes the utilities and special features of this computer,  
and the advanced usage of some utilities.  
Utilities and Applications  
This section describes the pre-installed utilities that come with the  
computer and details how to start them. For further information on their  
operation, you may refer to each utility's online manual, help files or  
README.TXT file (if applicable).  
All the utilities described here can be accessed from Desktop -> Desktop  
Assist (in taskbar).  
Furthermore, some utilities can also be launched from Start screen and  
desktop shortcut.  
TOSHIBA Desktop  
Assist  
TOSHIBA Desktop Assist is a graphical user  
interface that provides access to specific tools  
and TOSHIBA utilities and applications that make  
the use and configuration of the computer easier.  
To access this utility, click Desktop -> Desktop  
Assist (in taskbar).  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-1  
     
TOSHIBA Display  
Utility  
TOSHIBA Display Utility includes Desktop Text  
Size utility, Split Screen utility and Other Settings.  
Desktop Text Size allows you to make the text  
size bigger or smaller on the desktop according  
to your usage and favorite. You can change the  
text size on the display and on the title bar of  
windows by changing the scaling of the text size.  
When the scaling is smaller, more information will  
appear on the display simultaneously but the text  
size becomes smaller. When the scaling is  
larger, less information will appear on the display  
simultaneously but the text size becomes larger.  
You can install Split Screen utility by yourself.  
Split Screen utility enables you to create multiple  
display zones on a screen and to fit the active  
windows to within those zones.  
To access this utility, click Desktop -> Desktop  
Assist (in taskbar) -> Tools & Utilities ->  
Display Utility.  
For details on Desktop Text Size utility and Split  
Screen utility, see the help file.  
TOSHIBA Password  
Utility  
This utility allows you to set a password in order  
to restrict access to the computer.  
To access this utility, click Desktop -> Desktop  
Assist (in taskbar) -> Tools & Utilities ->  
Password Utility.  
TOSHIBA System  
Settings  
This utility allows you to customize your  
hardware settings according to the way you work  
with the computer and the peripherals you use.  
To access this utility, click Desktop -> Desktop  
Assist (in taskbar) -> Tools & Utilities ->  
System Settings.  
TOSHIBA HDD  
Accelerator  
TOSHIBA HDD Accelerator is a utility that can  
improve hard drive access performance by using  
part of the main memory of the computer as a  
cache.  
To access this utility, click Desktop -> Desktop  
Assist (in taskbar) -> Tools & Utilities ->  
System Settings -> HDD Accelerator.  
TOSHIBA VIDEO  
PLAYER  
This software is provided for playback of DVD  
Video. To access this utility, click Desktop ->  
Desktop Assist (in taskbar) -> Media &  
Entertainment -> TOSHIBA VIDEO PLAYER.  
For details on how to use TOSHIBA VIDEO  
PLAYER, see the help file.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-2  
TOSHIBA eco Utility This computer is equipped with "eco mode". This  
mode slightly lowers performance of some  
devices to reduce electric power consumption.  
You can realize measurable power savings by  
using it continuously.  
TOSHIBA eco Utility helps control the power  
consumption of your computer. Various  
information can help you understand your degree  
of contribution to the environment.  
Furthermore, this utility contains Peak shift  
function that can help reduce power usage during  
periods of peak demand by shifting some power  
consumption to periods when demand is lower.  
To access this utility, click Desktop -> Desktop  
Assist (in taskbar) -> Tools & Utilities -> eco  
Utility.  
For details on TOSHIBA eco utility, see the help  
file.  
TOSHIBA Blu-ray  
Disc Player  
This software is provided for playback of Blu-ray  
Disc™. It has an on-screen interface and  
functions. To start this utility, click Desktop ->  
Desktop Assist (in taskbar) -> Media &  
Entertainment -> TOSHIBA Blu-ray Disc  
Player. For details on how to use TOSHIBA Blu-  
ray Disc Player, see the help file.  
TOSHIBA Media  
Player by sMedio  
TrueLink+  
This software is a multimedia player which can  
be used to play back video, music and photo.  
TOSHIBA Media Player can play back contents  
on a local library/home network/SkyDrive.  
To access it, click the Media Player icon on the  
Start screen.  
For details, please refer to the Tutorial and  
Online help.  
TOSHIBA Function  
Key  
This utility allows you to perform some features  
by pressing a specified key or combined with the  
FN key.  
To setup this utility, click Desktop -> Desktop  
Assist (in taskbar) -> Tools & Utilities ->  
Function Key.  
For details, please refer to the Function Key  
section.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-3  
TOSHIBA Service  
Station  
This application allows your computer to  
automatically search for TOSHIBA software  
updates or other alerts from TOSHIBA that are  
specific to your computer system and its  
programs. When enabled, this application  
periodically transmits to our servers a limited  
amount of system information, which will be  
treated in strict accordance with the rules and  
regulations as well as applicable data protection  
law.  
To access this utility, click Desktop -> Desktop  
Assist (in taskbar) -> Support & Recovery ->  
Service Station.  
TOSHIBA PC Health  
Monitor  
The TOSHIBA PC Health Monitor application  
proactively monitors a number of system  
functions such as power consumption, battery  
health and system cooling, informing you of  
significant system conditions. This application  
recognizes the system and individual component  
serial numbers and will track specific activities  
related to their usage.  
To access this utility, click Desktop -> Desktop  
Assist (in taskbar) -> Support & Recovery ->  
PC Health Monitor.  
For details on TOSHIBA PC Health Monitor, see  
the help file.  
TOSHIBA Resolution+ The plug-in lets you upconverts wmv and mp4  
Plug-in for Windows videos on Windows Media Player.  
Media Player  
For more information, please refer to the  
TOSHIBA Resolution+ Plug-in for Windows  
Media Player Help.  
To access it, click Desktop -> Desktop Assist  
(in taskbar) -> Media & Entertainment ->  
TOSHIBA Resolution+ Plug-in for Windows  
Media Player - Help.  
You may not have all the software listed above depending on the model  
you purchased.  
Special features  
The following features are either unique to TOSHIBA computers or are  
advanced features which make the computer more convenient to use.  
Access each function using the following procedures.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-4  
 
*1 To access the Power Options, click Desktop -> Desktop Assist (in  
taskbar) -> Control Panel -> System and Security -> Power Options.  
Display automatic  
power off *1  
This feature automatically cuts off power to the  
computer's display panel when there is no  
keyboard input for a specified time, with power  
being restored the next time a key is pressed.  
This can be specified in the Power Options.  
HDD automatic power This feature automatically cuts off power to the  
off *1  
hard disk drive when it is not accessed for a  
specified time, with power being restored when  
the hard disk drive is next accessed. This can be  
specified in the Power Options.  
System automatic  
Sleep/Hibernation  
Mode *1  
This feature automatically shuts down the system  
into either Sleep Mode or Hibernation Mode  
when there is no input or hardware access for a  
specified time. This can be specified in the Power  
Options.  
Power on password  
Two levels of password security, supervisor and  
user, are available to prevent unauthorized  
access to your computer.  
Intelligent power  
supply *1  
A microprocessor in the computer's intelligent  
power supply detects the battery's charge,  
automatically calculates the remaining battery  
capacity and protects electronic components  
from abnormal conditions such as a voltage  
overload from the AC adaptor. This can be  
specified in the Power Options.  
Battery save mode *1  
Panel power on/off *1  
This feature lets you configure the computer in  
order to save battery power. This can be  
specified in the Power Options.  
This feature automatically turns power to the  
computer off when the display panel is closed,  
and turns it back on when the display panel is  
opened. This can be specified in the Power  
Options.  
Low battery  
When battery power is exhausted to the point  
automatic Hibernation that computer operation cannot be continued, the  
Mode *1  
system automatically enters Hibernation Mode  
and shuts itself down. This can be specified in  
the Power Options.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-5  
           
Sleep Mode  
If you have to interrupt your work, you can use  
this feature to allow you to turn off power to the  
computer without exiting from your software.  
Data is maintained in the computer's main  
memory so that when you next turn on the  
power, you can continue working right where you  
left off.  
Hibernation Mode  
This feature lets you turn off the power to the  
computer without exiting from your software. The  
contents of main memory are automatically  
saved to the Hard Disk Drive so that when you  
next turn the power on again, you can continue  
working right where you left off. Refer to the  
Turning off the power section, for more details.  
USB Wakeup function This function restores the computer from Sleep  
Mode depending on the external devices  
connected to the USB ports.  
For example, if a mouse or USB keyboard is  
connected to a USB port, clicking the mouse  
button or pressing the keyboard will wake up the  
computer.  
Heat dispersal *1  
To protect against overheating, the processor is  
equipped with an internal temperature sensor  
which activates a cooling fan or lowers the  
processing speed if the computer's internal  
temperature rises to a certain level. You are able  
to select whether to control this temperature by  
either turning on the fan first, then if necessary  
lowering the processor speed, or by lowering the  
processor speed first, then if necessary turning  
on the fan. Both of these functions are controlled  
through the Power Options.  
When the processor's temperature falls within  
normal range, the fan and the processor  
operation will return to its standard speed.  
If the processor's temperature reaches an  
unacceptably high level with either setting, the  
computer automatically shuts down to prevent  
any damage. In this instance all unsaved data in  
memory will be lost.  
TOSHIBA Password Utility  
The TOSHIBA Password Utility provides two levels of password security:  
User and Supervisor.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-6  
 
Passwords set by the TOSHIBA Password Utility function are different from  
the Windows password.  
User Password  
To start the utility, click the following items:  
Desktop -> Desktop Assist (in taskbar) -> Tools & Utilities ->  
Password Utility -> User Password  
User authentication may be required to validate user rights when using  
TOSHIBA Password Utility to delete or change passwords, etc.  
Set (button)  
Click this button to register a password. After a password is set, you  
will be prompted to enter it when you start the computer.  
After you set the password, a dialog box will be displayed asking  
whether you want to save it to other media. If you forget the password,  
you can open the password file on another computer. Be sure to keep  
the media in a safe place.  
When entering the character string to register the password, enter  
from the keyboard character by character and do not enter as ASCII  
code or copy-and-paste the character string. In addition, ensure that  
the registered password is correct by outputting the character string to  
the password file.  
When entering a password, do not enter any characters (for example  
"!" or "#") produced by pressing the SHIFT or ALT keys.  
Delete (button)  
Click this button to delete a registered password. Before you can  
delete a password, you must first enter the current password correctly.  
Change (button)  
Click this button to change a registered password. Before you can  
change a password, you must first enter the current password  
correctly.  
Owner String (text box)  
You can use this box to associate text with the password. After you  
enter text, click Apply or OK. When the computer is started, this text  
will be displayed together with the prompt asking you to enter a  
password.  
You can use BIOS Setup to set, change or delete the HDD Password or  
HDD Master Password.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-7  
 
To start BIOS Setup.  
1. In the Settings charm, click Power and then select Restart.  
2. Hold down the F2 key and then release this key one second after  
the computer is power on - the BIOS setup utility will load.  
To end the BIOS Setup, press F10, and then press ENTER to accept  
the changes. The computer will restart.  
If you forget your HDD User Password, TOSHIBA will NOT be able to  
assist you, and your HDD will be rendered COMPLETELY and  
PERMANENTLY INOPERABLE. TOSHIBA will NOT be held  
responsible for any loss of any data, any loss of use or access to your  
HDD, or for any other losses to you or any other person or  
organization that result from the loss of access to your HDD. If you  
can’t accept this risk, don’t register the HDD User Password.  
When saving the HDD User Password shut down or restart the  
computer. If the computer is not shut down or restarted, the saved  
data may not be correctly reflected. For more information on shutting  
down or restarting the computer, refer to Turning on the power.  
Supervisor Password  
If you set a Supervisor Password, some functions might be restricted when  
a user logs on with the User Password. To set a Supervisor Password:  
Desktop -> Desktop Assist (in taskbar) -> Tools & Utilities ->  
Password Utility -> Supervisor Password  
This utility lets you do the following:  
Register or delete the Supervisor Password.  
Specify restrictions for general users.  
Starting the computer using a password  
If you have already registered a user password, there is one way to start  
the computer:  
Enter the password manually.  
The password is necessary only if the computer was shut down in  
Hibernation mode or boot mode. It is not needed in Sleep mode and  
Restart.  
To enter a password manually, follow the steps as detailed below:  
1. Turn on the power as described in the Getting Started section. The  
following message will appear in the screen:  
Enter Password [ ]  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-8  
   
At this point, the function keys do not work. They will function after you  
enter the password.  
2. Enter the Password.  
3. Press ENTER.  
If you enter the password incorrectly three times in a row, or if you don’t  
enter the password within 1 minute, the computer shuts off. In this case,  
some features that can power on the computer automatically (Wake-up on  
LAN, Task Scheduler, etc) may not work. You must turn the computer back  
on to retry password entry.  
TOSHIBA System Settings  
TOSHIBA System Settings is the TOSHIBA configuration management tool  
available through the Windows operating system.  
To run TOSHIBA System Settings, click Desktop -> Desktop Assist (in  
taskbar) -> Tools & Utilities -> System Settings.  
The TOSHIBA System Settings window contains a number of tabs to allow  
specific functions of the computer to be configured.  
In addition there are also three buttons: OK, Cancel and Apply.  
OK  
Accepts your changes and closes the TOSHIBA  
System Settings window.  
Cancel  
Apply  
Closes the window without accepting your  
changes.  
Accepts all your changes without closing the  
TOSHIBA System Settings window.  
Some options shown in grey are possible to confirm their status.  
TOSHIBA System Settings screen may have the following tabs:  
General—Allows you to view the current BIOS version or change  
certain settings back to their default values  
Sleep and Charge/Sleep and Music—Allows you to set advanced  
features for sleep mode, hibernate mode, and shutdown state  
CPU—Allows you to set conditions for the CPU  
Display—Allows you to select the internal LCD and/or external monitor  
when the computer boots up  
Boot Options—Allows you to change the sequence in which your  
computer searches the drives for the operating system  
Keyboard—Allows you to access the wake-on keyboard function, or to  
configure the function keys  
USB—Allows you to set conditions for USB  
SATA—Allows you to set conditions for SATA  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-9  
 
LAN—Allows you to set conditions for LAN  
The settings or options explained here may vary depending on the model  
you purchased.  
After you changed the settings, a dialog box may appear to prompt you that  
the changes will take effect after the computer is restarted. Make sure to  
restart your computer immediately to apply these changes.  
USB Charge  
Your computer can supply USB Bus power (DC5V) to the USB port.  
The port with the icon ( ) (hereinafter called "compatible port") supports  
the following feature:  
USB Sleep and Charge  
System ON CDP Charge  
USB Sleep and Charge  
You can use the Sleep and Charge function to charge certain USB-  
compatible external devices such as mobile phones or portable digital  
music players. Your computer can supply USB bus power (DC5V) to the  
compatible port even when the computer is turned OFF. "Power OFF"  
includes Sleep Mode, Hibernation Mode or shutdown state.  
To set USB Sleep and Charge feature, click Desktop -> Desktop Assist  
(in taskbar) -> Tools & Utilities -> System Settings -> Sleep and  
Charge.  
Move the slider to enable or disable the Sleep and Charge function.  
The Sleep and Charge function may not work with certain external  
devices even if they are compliant with the USB specification. In those  
cases, turn the power of the computer ON to charge the device.  
When Sleep and Charge function is enabled, USB bus power (DC5V)  
will be supplied to compatible ports even when the power of the  
computer is turned OFF. USB bus power (DC5V) is similarly supplied  
to the external devices which are connected to the compatible ports.  
However, some external devices cannot be charged solely by  
supplying USB bus power (DC5V). As for the specifications of the  
external devices, please contact the device manufacturer or check the  
specifications of the external devices thoroughly before use.  
Using the sleep and charge function to charge external devices will  
take longer than charging the devices with their own chargers.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-10  
   
If Sleep and Charge function is enabled, the computer’s battery will  
discharge during hibernation or when the computer is turned off. It is  
recommended that you connect the AC adaptor to the computer while  
using Sleep and Charge function.  
External devices connected to the USB bus power (DC5V) function  
that interfaces with the power ON/OFF of the computer may always be  
in an operational state.  
When there is a current overflow of the external devices connected to  
the compatible ports, USB bus power (DC5V) supply may be stopped  
for safety reasons.  
When Sleep and Charge function is enabled, the USB Wakeup  
function may not work for compatible ports. In that case, if there is a  
USB port that does not have the Sleep and Charge function, attach  
the mouse or keyboard to it. If all USB ports have the Sleep and  
Charge function, change to disable Sleep and Charge function. The  
USB Wakeup function will now work, but the Sleep and Charge  
function will be disabled.  
Metal paper clips or hair pins/clips will generate heat if they come into  
contact with USB ports. Do not allow USB ports to come into contact with  
metal products, for example when carrying the computer in your bag.  
Your PC has multiple charging modes so that many different USB devices  
can be supported for Sleep and Charge function.  
Auto Mode (Default) is suitable for a wide range of digital audio players.  
While using Auto Mode, your computer can supply USB bus power at  
maximum 2.0A to the compatible ports while the computer is turned off.  
When USB device cannot be charged by Auto Mode, change to Alternate  
Mode.  
This function may not be able to be used with some connected external  
devices even if the appropriate mode is selected. In this situation, disable  
and stop using this function.  
Some external devices cannot use Auto Mode. As for the specifications of  
the external devices, please contact the device’s manufacture or check the  
specifications of the external device thoroughly before use.  
Always use the USB cable that was included with your USB device.  
Function under Battery Mode  
This option can be used to enable/disable sleep and charge under battery  
mode. It also displays the remaining battery capacity.  
Move the slider to enable or disable this function.  
Enabled  
Enables Sleep and Charge function under battery  
mode.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-11  
Disabled  
Enables Sleep and Charge function only when  
the AC adaptor is connected.  
Disable features when Specifies the lower limit of remaining battery life  
the battery level  
reaches  
by moving the slider bar. If the remaining battery  
life falls below the setting, the Sleep and Charge  
function will be stopped.  
This setting is only available when the Function  
under Battery Mode is enabled.  
System ON CDP Charge  
This function enable/disable CDP (Charging Downstream Port) to use rapid  
USB charge while the computer is powered on. When "System ON CDP  
Charge Mode" is enabled, your computer can supply USB bus power  
(DC5V, 1.5A) to the compatible ports while the computer is turned on.  
To set System ON CDP Charge Mode, click Desktop -> Desktop Assist  
(in taskbar) -> Tools & Utilities -> System Settings -> USB.  
Enabled  
Rapid USB battery charge at maximum 1.5A  
while PC is powered On.  
Disabled  
Conventional USB battery charge while PC is  
powered On.  
The "System ON CDP Charge Mode" may not work with certain external  
devices even if they are compliant with the USB specifications. In those  
cases, use a USB port without "USB Sleep and Charge function" or disable  
“System ON CDP Charge Mode”.  
It is recommended that AC adaptor be connected to the computer while  
supplying USB bus power (DC5V, 1.5A).  
When your computer battery capacity is too low to continue, "System ON  
CDP Charge Mode" may not work. In those cases, connect the AC adaptor  
and reboot the computer.  
Always use the USB cable that was included with your USB device.  
When "System ON CDP Charge Mode" or “USB Sleep and Charge  
function” is enabled, the “USB Wakeup” function may not work. In that  
case, use a USB port without "USB Sleep and Charge function" or disable  
both “System ON CDP Charge Mode” and “USB Sleep and Charge  
function”.  
TOSHIBA Media Player by sMedio TrueLink+  
Please be aware of the following limitations when you use the TOSHIBA  
Media Player by sMedio TrueLink+:  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-12  
 
Notes on use  
This software is a multimedia player which can be used to play back video,  
music and photo. However, some files may not be able to play back  
normally.  
It is recommended that the AC adaptor be connected while TOSHIBA  
Media Player is running. Power saving features may interfere with  
smooth playback. When TOSHIBA Media Player is used with a battery  
power, set the Power Options to "Balance".  
The screen saver is disabled while TOSHIBA Media Player is playing  
a video file or slideshows of photos.  
The computer will not enter Sleep, Hibernation and shut-down mode  
automatically, while TOSHIBA Media Player is running.  
The display automatic power off function is disabled while TOSHIBA  
Media Player is playing a video file or slideshows of photos.  
The Resolution+ function was specially adjusted for the internal  
monitor. Hence, please turn OFF Resolution+ when viewing on  
external monitor.  
Playback of high bit rate content may cause frame dropping, audio  
skipping or decrease in computer performance.  
The above problems could be remedied by turning Resolution+ off.  
Tap/click the Refresh button on app commands to refresh the content  
displayed on Library Screen. It won’t be refreshed automatically.  
If sleep, hibernation, shutdown or reboot operation is in process during  
uploading the files to SkyDrive, the operation will not be properly  
completed.  
This app doesn’t support to playback content protected by DRM. If you  
try to play DRM protected content with Resolution+ On state, this app  
may be closed.  
Photos uploaded to SkyDrive are limited to a maximum resolution of  
2048 x 2048 pixels. Any photo over that resolution will be scaled  
proportionally to a maximum size of 2048 x 2048 pixels.  
This app doesn't support DMS.  
Operating TOSHIBA Media Player by sMedio TrueLink+  
The steps for playing a video file on a local library:  
1. Click My Local Library on the Start Page of TOSHIBA Media Player.  
2. Click a video file to playback.  
The steps for playing a music file on a local library:  
1. Click My Local Library on the Start Page of TOSHIBA Media Player.  
2. Click Music in the upper-left corner of the screen.  
3. Select an artist icon or album icon for playback.  
4. Click a music file to playback.  
The steps for playing a photo file on a local library:  
1. Click My Local Library on the Start Page of TOSHIBA Media Player.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-13  
2. Click Photos in the upper-left corner of the screen.  
3. Select a folder icon or date icon for playback.  
4. Click a photo file to playback.  
Opening TOSHIBA Media Player by sMedio TrueLink+  
Manual  
The features and operations about TOSHIBA Media Player are explained  
in the TOSHIBA Media Player Manual.  
Use the following procedure to open TOSHIBA Media Player Manual:  
Click the Tutorials icon on the Start Page of TOSHIBA Media Player.  
Use the following procedure to open TOSHIBA Media Player Online help:  
When TOSHIBA Media Player is running, click Help of the Settings Charm.  
TOSHIBA PC Health Monitor  
The TOSHIBA PC Health Monitor application proactively monitors a  
number of system functions such as power consumption, battery health  
and the system cooling, informing you of significant system conditions. This  
application recognizes the system and individual component serial  
numbers, and will track specific activities related to the computer and their  
usage.  
The collected information includes device operation time and number of  
actuations or status changes (i.e.: number of power button and FN key  
combination uses, AC adaptor, battery, LCD, fan, HDD/SSD, sound  
volume, wireless communication functionalities and USB information), date  
of initial system use, and also computer and device usage (i.e.: power  
settings, battery temperature and recharging, CPU, memory, backlight  
illumination time, and temperatures for various devices). The stored data  
uses a very small portion of the total hard disk capacity, approximately  
10MB or less per year.  
This information is used to identify and provide a notification of system  
conditions which may effect the performance of your TOSHIBA computer. It  
may also be used to help diagnose problems should the computer require  
service by TOSHIBA or TOSHIBA's authorized service providers.  
Additionally, TOSHIBA may also use this information for quality assurance  
analysis.  
Subject to the use restrictions above, the HDD data logged may be  
transferred to entities located outside of your country or region of residence  
(e.g., European Union). Those countries may or may not have the same  
data protection laws or data protection levels as required by your home  
country or region.  
Once enabled, you may disable the TOSHIBA PC Health Monitor at any  
time by uninstalling the software via Uninstall a program in the Control  
Panel. Doing so will automatically delete all collected information from the  
HDD/SSD.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-14  
 
The TOSHIBA PC Health Monitor software does not extend or modify  
TOSHIBA's obligations under its standard limited warranty in any way.  
TOSHIBA's standard limited warranty terms and limitations apply.  
Starting the TOSHIBA PC Health Monitor  
The TOSHIBA PC Health Monitor can be started by clicking Desktop ->  
Desktop Assist (in taskbar) -> Support & Recovery -> PC Health  
Monitor.  
The TOSHIBA PC Health Monitor main screen will be displayed and on  
clicking Please click here to enable TOSHIBA PC Health Monitor, the  
"PC Health Monitor Software Notice & Acceptance" screen will be  
displayed. Please carefully read the information displayed. Selecting  
ACCEPT and clicking OK will enable the program. By enabling the  
TOSHIBA PC Health Monitor software, you agree with these terms and  
conditions and to the use and sharing of the collected information. Once  
the program is enabled, the TOSHIBA PC Health Monitor screen is  
displayed, and the program will begin monitoring system functions and  
collecting information.  
A message will be displayed if any changes which may interfere with the  
operation of the program are detected. Follow the instructions displayed on  
screen in the message.  
System Recovery  
There is a hidden partition allocated on the Hard Disk Drive for the System  
Recovery Options in the event of a problem.  
You can also create recovery media and restore the system.  
The following items will be described in this section:  
Creating Recovery Media  
Restoring the pre-installed software from your created Recovery  
Media  
Restoring the pre-installed software from the Recovery Hard Disk  
Drive  
Ordering Recovery Discs from TOSHIBA  
Creating Recovery Media  
This section describes how to create Recovery Media.  
Be sure to connect the AC adaptor when you create Recovery Media.  
Be sure to close all other software programs except the Recovery  
Media Creator.  
Do not run software such as screen savers which can put a heavy  
load on the CPU.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-15  
 
Operate the computer at full power.  
Do not use power-saving features.  
Do not write to the media when the virus check software is running.  
Wait for it to finish, then disable virus detection programs including any  
software that checks files automatically in the background.  
Do not use utilities, including those intended to enhance Hard Disk  
Drive access speed. They may cause unstable operation and damage  
data.  
Do not shut down/log off or Sleep/Hibernate while writing or rewriting  
the media.  
Set the computer on a level surface and avoid places subjected to  
vibrations such as airplanes, trains, or cars.  
Do not use on an unstable surface such as a stand.  
A recovery image of the software on your computer is stored on the Hard  
Disk Drive, and can be copied to either disc media or USB Flash Memory  
by using the following steps:  
1. Select either blank disc or USB Flash Memory.  
The application will allow you to choose from a variety of different  
media onto which the recovery image can be copied including disc  
media and USB Flash Memory.  
Please note that some of the disc media may not be compatible with  
the optical disc drive connected to your computer. You should  
therefore verify the optical disc drive supports the blank media you  
have chosen before proceeding.  
USB Flash Memory will be formatted and all the data in the USB Flash  
Memory will be lost when proceeding.  
2. Turn on your computer and allow it to load the Windows operating  
system from the Hard Disk Drive as normal.  
3. Insert the first blank disc into the optical disc drive tray or insert the  
USB Flash Memory into one available USB port.  
4. Click Desktop -> Desktop Assist (in taskbar) -> Support &  
Recovery -> Recovery Media Creator.  
5. After Recovery Media Creator starts, select the type of media and the  
title you wish to copy, and then click the Create button.  
Restoring the pre-installed software from your created  
Recovery Media  
If the pre-installed files are damaged, you are able to use the Recovery  
Media you have created to restore the computer to the state it was in when  
you originally received it. To perform this restoration, follow the steps  
below:  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-16  
 
When you reinstall the Windows operating system, the hard disk will  
be reformatted and all data will be lost.  
Please make sure that the Boot Speed is set to Normal. (To access it,  
click Desktop -> Desktop Assist (in taskbar) -> Tool & Utilities ->  
System Settings -> Boot Options.)  
Please make sure to use the default Boot Mode option in the BIOS  
setup utility before restoring.  
1. In the Settings charm, click Power and then select Restart.  
2. Hold down the F2 key and then release this key one second after  
the computer is power on - the BIOS setup utility will load.  
In the BIOS setup screen, select Advanced -> System Configuration  
-> Boot Mode -> UEFI Boot (Default).  
If you set the Boot Mode as CSM Boot, the recovery media created by  
Recovery Media Creator will NOT be able to restore.  
If you create a recovery image using advanced recovery tools from  
Control Panel, please also make sure to use the default Boot Mode  
option (UEFI Boot) in the BIOS setup utility before restoring.  
1. Load the Recovery Media into the Optical Disc Drive or insert the  
recovery USB Flash Memory into one available USB port.  
2. In the Settings charm, click Power and then select Restart.  
3. Hold down the F12 key and then release this key one second after the  
computer is power on.  
4. Use the up and down cursor key to select the appropriate option from  
the menu according to your actual recovery media.  
5. A menu will be displayed from which you should follow the on-screen  
instructions.  
If you have previously chosen to remove the recovery partition and are  
trying to create "Recovery Media", you will see the following message: "The  
Recovery Media Creator can not be launched because there is no recovery  
partition."  
When there is no recovery partition, the Recovery Media Creator cannot  
make Recovery Media.  
However, if you have already created a "Recovery Media", you can use it  
to restore the recovery partition.  
If you have not created "Recovery Media", please contact TOSHIBA  
support for assistance.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-17  
Restoring the pre-installed software from the  
Recovery Hard Disk Drive  
A portion of the total Hard Disk Drive space is configured as a hidden  
recovery partition. This partition stores files which can be used to restore  
pre-installed software in the event of a problem.  
If you subsequently set up your Hard Disk Drive again, do not change,  
delete or add partitions in a manner other than specified in the manual,  
otherwise you may find that space for the required software is not  
available.  
In addition, if you use a third-party partitioning program to reconfigure the  
partitions on your Hard Disk Drive, you may find that it becomes impossible  
to setup your computer.  
Make sure that the AC adaptor is connected during the restoring process.  
When you reinstall the Windows operating system, the hard disk may be  
reformatted and all data may be lost.  
1. In the Settings charm, click Power and then select Restart.  
2. Hold down 0 (zero) key and then release this key one second after the  
computer is power on.  
3. Select Troubleshoot.  
4. Select Reset your PC.  
5. Follow the on screen instructions to finish the recovery.  
You can also perform the restoration through PC settings in the operating  
system:  
1. Click the Settings charm and click Change PC settings.  
2. Click General under PC settings.  
3. Scroll down to Remove everything and reinstall Windows and click  
Get started.  
4. Follow the on screen instructions to finish the recovery.  
Ordering Recovery Discs from TOSHIBA*  
You can order Product Recovery discs for your notebook from the  
TOSHIBA Europe Backup Media Online Shop.  
* Please note that this service is not free-of-charge.  
1. Visit https://backupmedia.toshiba.eu on the Internet.  
2. Follow the on-screen instructions. You will receive your Recovery  
Discs within two weeks after placing your order.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5-18  
   
Chapter 6  
Troubleshooting  
TOSHIBA has designed this computer for durability, however, should  
problems occur you are able to use the procedures detailed in this chapter  
to help determine the cause.  
All users should become familiar with this chapter as knowing what might  
go wrong can help prevent problems from occurring in the first place.  
Problem solving process  
Resolving problems will be much easier if you observe the following  
guidelines:  
Stop immediately when you recognize a problem exists as taking  
further action may result in data loss or damage, or you may destroy  
valuable problem related information that can help solve the problem.  
Observe what is happening - write down what the system is doing and  
what actions you performed immediately before the problem occurred.  
Make a screenshot of the current display.  
Please also be aware that the questions and procedures described in this  
chapter are meant only as a guide, they are not definitive problem solving  
techniques. In reality many problems can be solved simply, but a few may  
require help from TOSHIBA Support - if you find you need to consult  
others, be prepared to describe the problem in as much detail as possible.  
Preliminary checklist  
You should always consider the simplest solution first - the items detailed  
in this checklist are easy to fix and yet can cause what appears to be a  
serious problem:  
Make sure you turn on all peripheral devices before you turn on the  
computer - this includes your printer and any other external device you  
are using.  
Before you attach an external device you should first turn the  
computer off, then when you turn the computer back on again it will  
recognize the new device.  
Make sure all optional accessories are configured properly in the  
computer's setup program and that all required driver software has  
been loaded (please refer to the documentation included with the  
optional accessories for further information on its installation and  
configuration).  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-1  
   
Check all cables to ensure they are correctly and firmly attached to the  
computer - loose cables can cause signal errors.  
Inspect all connecting cables for loose wires and all connectors for  
loose pins.  
Check that your disc media is correctly loaded  
Always try to make detailed notes of your observations and keep them in a  
permanent error log - this will help you to describe your problems to  
TOSHIBA Support. In addition, if a problem recurs, the log you have made  
will help to identify the problem faster.  
Analyzing the problem  
Sometimes the computer will give you clues that can help you identify why  
it is malfunctioning. In view of this you should keep the following questions  
in mind:  
Which part of the computer is not operating properly - keyboard, Hard  
Disk Drive, display panel, Touch Pad, Touch Pad control buttons - as  
each device will produce different symptoms.  
Check the options within the operating system to ensure that its  
configuration is set properly.  
What appears on the display? Does it display any messages or  
random characters? Make a screenshot of the current display and, if  
possible, look up the messages in the documentation included with the  
computer, software or operating system.  
Check that all connecting cables are correctly and firmly attached as  
loose cables can cause erroneous or intermittent signals.  
Do any indicators light, if so, which ones, what color are they and do  
they stay on or blink? Write down what you see.  
Do you hear any beeps, if so how many, are they long or short and are  
they high pitched or low pitched? In addition, is the computer making  
any unusual noises? Write down what you hear.  
Record your observations so you can describe them in detail to TOSHIBA  
Support.  
Software  
The problems may be caused by your software  
or disk. If you cannot load a software package,  
the media may be damaged or the program  
might be corrupted - in these instances try  
loading another copy of the software if possible.  
If an error message appears while you are using  
a software package you should refer to the  
documentation supplied with it as this will usually  
include a problem solving section or a summary  
of error messages.  
Next, you should check any error messages  
against the operating system documentation.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-2  
 
Hardware  
If you cannot find a software problem, you should  
then check the setup and configuration of your  
hardware. First run through the items in the  
preliminary checklist as described previously  
then, if you still cannot correct the problem, try to  
identify the source - the next section provides  
checklists for individual components and  
peripherals.  
Before using a peripheral device or application software that is not an  
authorized TOSHIBA part or product, make sure the device or software can  
be used with your computer. Use of incompatible devices may cause injury  
or may damage your computer.  
If something goes wrong  
Your computer does not respond to the keyboard commands  
If an error occurs and the computer does not respond to your keyboard  
commands, follow the steps below:  
Press the power button and hold it down for five seconds. Once the  
computer has turned itself off, wait between ten and fifteen seconds before  
turning the power on again by pressing the power button.  
Your program stops responding  
If you are working with a program that suddenly freezes all operations,  
chances are the program has stopped responding. You can exit the failed  
program without shutting down the operating system or closing other  
programs.  
To close a program that has stopped responding:  
1. Press CTRL, ALT, and DEL simultaneously (once), then click Task  
Manager. The Windows Task Manager window appears.  
2. Select the program you want to close, then click End Task. Closing  
the failed program should allow you to continue working. If it does not,  
continue with the next step.  
3. Close the remaining programs one by one by selecting the program  
name, then End Task. Closing all programs should allow you to  
continue working. If it does not, power off your computer and then  
restart it.  
The computer will not start  
Make sure you attached the AC adaptor and power cord/cable properly.  
If you are using the AC adaptor, check that the wall outlet is working by  
plugging in another device, such as a lamp.  
Verify that the computer is on by looking at the Power indicator.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-3  
If the indicator is glowing, the computer is on. Also, try turning the computer  
off and then on.  
If you are using an AC adaptor, verify that the computer is receiving power  
from the external power source by looking at the DC IN/Battery indicator. If  
the indicator is glowing, the computer is connected to a live external power  
source.  
The computer will not load advanced options during startup  
By holding down one of the following keys during startup, your computer  
will load advanced options as shown below.  
Key  
Advanced option  
BIOS utility  
F2  
F12  
Boot menu  
0 (zero)  
Recovery options  
If your computer starts to load the Operating System instead of desired  
advanced options, follow the steps below:  
1. In the Settings charm, click Power and then select Restart.  
2. Hold down the corresponding key and then release this key one  
second after the computer is power on.  
3. Follow the on-screen instructions to proceed.  
Hardware and system checklist  
This section discusses problems caused by your computer’s hardware or  
attached peripherals. Basic problems may occur in the following areas:  
Power  
USB device  
Keyboard  
Additional memory module  
Sound system  
External monitor  
LAN  
Wireless LAN  
Bluetooth  
Internal display panel  
Hard Disk Drive  
Optical Disc Drive  
Memory Media Card  
Pointing Device  
Power  
When the computer is not plugged into an AC power outlet, the battery  
pack is the primary power source. However, your computer also has a  
number of other power resources, including an intelligent power supply and  
a Real Time Clock (RTC) battery, all of which are interrelated with any one  
having the ability to produce apparent power problems.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-4  
     
Overheating power down  
If the processor's temperature reaches an unacceptably high level with  
either setting, the computer will automatically shut down to prevent any  
damage - in this instance all unsaved data in memory will be lost.  
Problem  
Procedure  
Computer shuts  
Leave the computer off until it reaches room  
down automatically. temperature. If the computer has reached room  
temperature and it still does not start, or if it starts  
but shuts down quickly, contact TOSHIBA Support.  
AC power  
If you have trouble turning on the computer with the AC adaptor connected  
you should check the status of the DC IN/Battery indicator. Please refer to  
the Power Condition Descriptions section for further information.  
Problem  
Procedure  
AC adaptor doesn’t Check the connections to make sure that the  
power the computer power cord/adaptor is firmly connected to the  
computer and a working power outlet.  
Check the condition of the cord and terminals. If  
the cord is frayed or damaged it should be  
replaced, while if the terminals are soiled, they  
should be cleaned with a clean cotton cloth.  
If the AC adaptor still does not power the  
computer, you should contact TOSHIBA Support.  
Battery  
If you suspect a problem with the battery, you should check the status of  
the DC IN/Battery indicator.  
Problem  
Procedure  
Battery doesn’t  
The battery may be discharged - connect the AC  
power the computer adaptor to recharge the battery.  
Battery doesn’t  
If the battery is completely discharged, it will not  
charge when the AC begin charging immediately, in these instances you  
adaptor is attached. should wait a few minutes before trying again. If  
the battery still does not charge, you should check  
that the power outlet the AC adaptor is connected  
to is supplying power - this can be tested by  
plugging another appliance into it.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-5  
     
Problem  
Procedure  
Battery doesn’t  
If you frequently recharge a partially charged  
power the computer battery, the battery might not charge to its full  
as long as expected potential - in these instances you should fully  
discharge the battery and then attempt to charge it  
again.  
Check the Power saver option under Select a  
power plan in the Power Options.  
Real Time Clock  
Problem  
Procedure  
The BIOS setting  
and system date/  
time are lost.  
The charge in the Real Time Clock (RTC) battery  
has run out - you will need to set the date and time  
in the BIOS setup application by using the  
following steps:  
1. In the Settings charm, click Power and then  
select Restart.  
2. Hold down the F2 key and then release this  
key one second after the computer is power  
on - the BIOS setup utility will load.  
3. Set the date in the System Date field.  
4. Set the time in the System Time field.  
5. Press F10 - a confirmation message will be  
displayed.  
6. Press the ENTER key - the BIOS setup  
application will end and the computer will  
restart.  
Keyboard  
Keyboard problems can be caused by the setup and configuration of the  
computer - please refer to the The Keyboard section for further information.  
Problem  
Procedure  
Output to screen is  
garbled  
Please refer to your software's documentation to  
ensure that it is not remapping the keyboard in any  
way (remapping involves changing or reassigning  
the function of each key).  
If you are still unable to use the keyboard, you  
should contact TOSHIBA Support.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-6  
   
Internal display panel  
Apparent computer's display panel problems may be related to the  
computer's setup and configuration.  
Problem  
Procedure  
No display  
Press the function keys to adjust the display  
priority, and to make sure it is not set for output to  
an external monitor.  
Markings appear on These marks may have come from contact with the  
the computer's  
display panel.  
keyboard and Touch Pad while the display panel  
has been closed. You should try to remove the  
marks by gently wiping the display panel with a  
clean dry cloth or, if this fails, with a good quality  
LCD screen cleaner. In this latter instance you  
should always follow the instructions with the  
screen cleaner and always ensure you let the  
display panel dry properly before closing it.  
Hard Disk Drive  
Problem  
Procedure  
Computer does not  
Check to see whether there is a disc in the optical  
boot from Hard Disk disc drive - if so remove it and try to start the  
Drive  
computer again.  
If this has no effect, check the Boot Priority  
Options setting within the TOSHIBA System  
Settings.  
Slow performance  
The files on the Hard Disk Drive may be  
fragmented - in this instance you should run the  
disk Defragmentation utility to check the condition  
of your files and the Hard Disk Drive. Please refer  
to the operating system's documentation or online  
Help File for further information on operating and  
using the Defragmentation utility.  
As a last resort you should reformat the Hard Disk  
Drive and then reload the operating system and all  
other files and data. If you are still unable to  
resolve the problem, contact TOSHIBA Support.  
Optical Disc Drive  
For further information, please refer to Operating Basics.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-7  
   
Problem  
Procedure  
You cannot access a Make sure the drive’s disc tray is securely closed.  
CD/DVD/Blu-ray  
Press gently until it clicks into place.  
Disc™ in the drive  
Open the disc tray and make sure the disc is  
properly seated. It should lie flat with the label  
facing up.  
A foreign object in the disc tray could block laser  
light from reading the disc. Make sure there is no  
obstruction. Remove any foreign object.  
Check whether the disc is dirty. If it is, wipe it with  
a clean cloth dipped in water or a neutral cleaner.  
Memory Media Card  
For further information, please refer to Operating Basics.  
Problem Procedure  
Memory media card Remove the memory media card from the  
error occurs  
computer and then reinsert it in order to ensure it is  
firmly connected.  
If the problem persists, then you should refer to the  
documentation supplied with your memory media  
card for further information.  
You cannot write to Remove the memory media card from the  
a memory media  
card  
computer and check to ensure that it is not write  
protected.  
You cannot read a  
file  
Check to ensure the required file is actually on the  
memory media card that is inserted into the  
computer.  
If you are still unable to resolve the problem,  
contact TOSHIBA Support.  
Pointing device  
If you are using a USB mouse, you should also refer to both the USB  
mouse section and the documentation supplied with your mouse.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-8  
   
Touch Pad  
Problem  
Procedure  
The Touch Pad does Check the Device Select settings.  
not work.  
Click Desktop -> Desktop Assist (in taskbar) ->  
Control Panel -> Hardware and Sound ->  
Mouse.  
On-screen pointer  
In this instance the system might be busy - Try  
does not respond to moving the mouse again after waiting a short  
pointing device  
operation  
while.  
Double-tapping  
(Touch Pad) does  
not work  
In this instance, you should initially try changing  
the double-click speed setting within the Mouse  
Control utility.  
1. To access this utility, click Desktop ->  
Desktop Assist (in taskbar) -> Control  
Panel -> Hardware and Sound -> Mouse.  
2. Within the Mouse Properties window, click the  
Buttons tab.  
3. Set the double-click speed as required and  
click OK.  
The on-screen  
pointer moves too  
fast or too slow  
In this instance, you should initially try changing  
the speed setting within the Mouse Control utility.  
1. To access this utility, click Desktop ->  
Desktop Assist (in taskbar) -> Control  
Panel -> Hardware and Sound -> Mouse.  
2. Within the Mouse Properties window, click the  
Pointer Options tab.  
3. Set the pointer speed as required and click  
OK.  
The reaction of  
Adjust the touch Sensitivity.  
Touch Pad is either  
too sensitive or not  
sensitive enough.  
To access it, click Desktop -> Desktop Assist (in  
taskbar) -> Control Panel -> Hardware and  
Sound -> Mouse.  
If you are still unable to resolve the problem,  
contact TOSHIBA Support.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-9  
 
USB mouse  
Problem  
Procedure  
On-screen pointer  
In this instance the system might be busy - Try  
does not respond to moving the mouse again after waiting a short  
mouse operation  
while.  
Remove the mouse from the computer and then  
reconnect it to a free USB port in order to ensure it  
is firmly attached.  
Double-clicking does In this instance, you should initially try changing  
not work  
the double-click speed setting within the Mouse  
Control utility.  
1. To access this utility, click Desktop ->  
Desktop Assist (in taskbar) -> Control  
Panel -> Hardware and Sound -> Mouse.  
2. Within the Mouse Properties window, click the  
Buttons tab.  
3. Set the double-click speed as required and  
click OK.  
The on-screen  
pointer moves too  
fast or too slow  
In this instance, you should initially try changing  
the speed setting within the Mouse Control utility.  
1. To access this utility, click Desktop ->  
Desktop Assist (in taskbar) -> Control  
Panel -> Hardware and Sound -> Mouse.  
2. Within the Mouse Properties window, click the  
Pointer Options tab.  
3. Set the pointer speed as required and click  
OK.  
The on-screen  
pointer moves  
erratically  
The elements of the mouse responsible for  
detecting movement might be dirty - please refer to  
the documentation supplied with the mouse for  
instructions on how to clean it.  
If you are still unable to resolve the problem,  
contact TOSHIBA Support.  
USB device  
In addition to the information in this section, please also refer to the  
documentation supplied with your USB device.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-10  
     
Problem  
Procedure  
USB device does not Remove the USB device from the computer and  
work  
then reconnect it to a free port in order to ensure it  
is firmly attached.  
Ensure that any required USB device drivers are  
properly installed - to achieve this you should refer  
to both the device documentation and the  
operating system documentation.  
Sleep and Charge function  
For more information and settings, please refer to the USB Sleep and  
Charge section.  
Problem  
Procedure  
I cannot use the  
Sleep and Charge  
function.  
Sleep and Charge function may be disabled.  
Enable the Sleep and Charge function in the  
TOSHIBA System Settings.  
When there is a current overflow of the external  
device connected to the compatible port, USB bus  
power (DC5V) supply may be stopped for safety  
reasons. When this happens, disconnect an  
external device if some external devices are  
connected. After that, turn the power of the  
computer ON/OFF to restore the function. If this  
function can not be still used even if only one  
external device is connected, stop using the  
external device because its current is over the  
acceptable value of this computer.  
Some external devices may not be able to use the  
Sleep and Charge function. In this case, please try  
one or more of the following methods.  
Turn OFF the computer while external devices  
are connected.  
Connect external devices after turning OFF of  
the computer.  
If this function cannot be still used, change the  
setting to disable the function and stop using this  
function.  
The battery depletes If Sleep and Charge function is enabled, the  
quickly even when I computer's battery will discharge during  
turned OFF the  
power of the  
computer.  
hibernation or when the computer is turned off.  
Connect the AC adaptor to the computer or disable  
the Sleep and Charge function.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-11  
Problem  
Procedure  
External devices  
connected to the  
Some external devices may not work when  
connected to a compatible port if the Sleep and  
compatible ports do Charge function is enabled.  
not work when  
Reconnect the external device after turning the  
computer ON.  
connected to a  
compatible port.  
If the external device still does not work, connect  
device to an USB port that does not have the  
Sleep and Charge function or change to disable  
the Sleep and Charge function.  
The "USB Wakeup  
function" does not  
work.  
When Sleep and Charge function is enabled, the  
"USB WakeUp" function does not work for ports  
that support the Sleep and Charge function.  
In that case, use an USB port that does not have  
the USB Sleep and Charge function or change to  
disable Sleep and Charge function.  
Sound system  
In addition to the information in this section, please also refer to the  
documentation supplied with your audio device.  
Problem  
Procedure  
No sound is heard  
Press the function keys to increase or decrease  
volume.  
Check the software volume settings.  
Please check to see if Mute is turned to Off  
Check to make sure the headphone connection is  
secure.  
Check within the Windows Device Manager  
application to ensure the sound device is enabled  
and that the device is properly working.  
Annoying sound is  
heard  
In this instance you may be experiencing feedback  
from either the internal microphone or an external  
microphone connected to the computer - please  
refer to Sound System and Video mode for further  
information.  
Volume cannot be adjusted during Windows start  
up or shut down.  
If you are still unable to resolve the problem,  
contact TOSHIBA Support.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-12  
 
External monitor  
Please also refer to Operating Basics, and to the documentation supplied  
with your monitor for further information.  
Problem  
Procedure  
Monitor does not  
turn on  
After confirming that the monitor's power switch is  
on, you should check the connections to make  
sure that the power cord/adaptor is firmly  
connected to the monitor and to a working power  
outlet.  
No display  
Try adjusting the contrast and brightness controls  
on the external monitor.  
Press the function key in order to change the  
display priority and ensure that it is not set for the  
internal display only.  
Check to see if the external monitor is connected.  
When the external monitor is set as the primary  
display device in extended desktop mode, it will not  
display when the computer wakes up from Sleep  
Mode if the external monitor has been  
disconnected while in Sleep Mode.  
To keep this from happening, do not disconnect  
the external monitor while the computer is in Sleep  
or Hibernation Mode.  
Remember to turn off the computer before  
disconnecting the external monitor.  
When the display panel and an external monitor  
are set to clone mode and they are turned off by  
the timer, the display panel or the external monitor  
may not display when turned on again.  
If this occurs, press the function key to re-set the  
display panel and external monitor to clone mode.  
Display error occurs Check that the cable connecting the external  
monitor to the computer is firmly attached.  
If you are still unable to resolve the problem,  
contact TOSHIBA Support.  
LAN  
Problem  
Procedure  
Cannot access LAN Check for a firm cable connection between the  
LAN jack and the LAN hub.  
User's Manual  
6-13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Problem  
Procedure  
Wake-up on LAN  
does not work  
Make sure the AC adaptor is connected. The  
Wake-up on LAN function consumes power even  
when the system is off.  
If problems persist, consult your LAN administrator.  
Wireless LAN  
Problem  
Procedure  
Cannot access  
Wireless LAN  
Make sure the computer's Wireless communication  
function is on.  
If problems persist, contact your LAN  
administrator.  
Bluetooth  
Problem  
Procedure  
Cannot access  
Bluetooth device  
Check to ensure the computer's Wireless  
Communication function is on.  
Check to ensure the Bluetooth Manager  
application is running on the computer and that  
power to the external Bluetooth device is turned  
on.  
Check to ensure that no optional Bluetooth Adaptor  
is installed in the computer - the built-in Bluetooth  
hardware cannot operate simultaneously with  
another Bluetooth controller.  
If you are still unable to resolve the problem,  
contact TOSHIBA Support.  
TOSHIBA support  
If you require any additional help using your computer or if you are having  
problems operating the computer, you may need to contact TOSHIBA for  
additional technical assistance.  
Before you call  
Some problems you experience may be related to software or the  
operating system so it is important that you investigate other sources of  
assistance first. Before contacting TOSHIBA, try the following:  
Review troubleshooting sections in the documentation supplied with  
your software and/or peripheral devices.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-14  
   
If a problem occurs when you are running software applications,  
consult the software documentation for troubleshooting suggestions  
and consider calling the software company's technical support  
department for assistance.  
Consult the reseller or dealer from where you purchased your  
computer and/or software - they are your best resource for current  
information and support.  
TOSHIBA technical support  
If you are still unable to solve the problem and suspect that it is hardware  
related, read the enclosed warranty booklet or visit www.toshiba-  
europe.com on the Internet.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6-15  
Chapter 7  
Appendix  
Specifications  
This section summarizes the computer’s technical specifications.  
Physical Dimensions  
Physical Dimensions shown below do not include parts that extend beyond  
the main body. The physical dimensions may vary depending on the model  
you purchased.  
Size  
Approximately 413.0 (w) x 268 (d) x 31.31~33.70  
(h) millimeters  
Approximately 413.0 (w) x 268 (d) x 30.66~33.05  
(h) millimeters  
(not including parts that extend beyond the main body).  
Environmental Requirements  
Conditions  
Operating  
Ambient temperature Relative humidity  
5°C (41°F) to 35°C  
(95°F)  
20% to 80%  
(noncondensing)  
Non-operating  
-20°C (-4°F) to 60°C  
(140°F)  
10% to 90%  
(noncondensing)  
Wet-bulb temperature 29°C maximum  
Conditions  
Altitude (from sea  
level)  
Operating  
-60 to 3,000 meters  
Non-operating  
-60 to 10,000 meters  
maximum  
Power Requirements  
AC adaptor  
100-240V AC  
50 or 60 Hz (cycles per second)  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-1  
   
Computer  
19V DC  
External RGB monitor port pin assignment  
5
1
10  
6
11  
15  
Pin  
1
Signal Name  
CRV  
Description  
I/O  
O
Red Video Signal  
Green Video Signal  
Blue Video Signal  
Reserved  
2
CGV  
O
3
CBV  
O
4
Reserved  
GND  
5
Ground  
6
GND  
Ground  
7
GND  
Ground  
8
GND  
Ground  
9
+5V  
Power Supply  
Ground  
10  
11  
12  
13  
14  
15  
GND  
Reserved  
SDA  
Reserved  
Data Signal  
I/O  
O
HSYNC  
VSYNC  
SCL  
Horizontal Sync Signal  
Vertical Sync Signal  
Data Clock Signal  
O
O
I/O (I): Input to computer  
I/O (O): Output from computer  
AC Power Cord and Connectors  
The power cord’s AC input plug must be compatible with the various  
international AC power outlets and the cord must meet the standards for  
the country/region in which it is used. All cords must meet the following  
specifications:  
Minimum 0.75 mm2  
Wire size:  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-2  
   
Current rating:  
Minimum 2.5 amperes  
Certification agencies  
China:  
CQC  
U.S. and Canada:  
UL listed and CSA certified  
No. 18 AWG, Type SVT or SPT-2  
Australia:  
Japan:  
AS  
DENANHO  
Europe:  
Austria:  
Belgium:  
Denmark:  
Finland:  
France:  
OVE  
Italy:  
IMQ  
CEBEC  
DEMKO  
FIMKO  
LCIE  
The Netherlands:  
Norway:  
KEMA  
NEMKO  
SEMKO  
SEV  
Sweden:  
Switzerland:  
United Kingdom:  
Germany:  
VDE  
BSI  
In Europe, two conductors power cord must be VDE type, H05VVH2-F or  
H03VVH2-F and for three conductors power cord must be VDE type,  
H05VV-F.  
For the United States and Canada, two pin plug configuration must be a  
2-15P (250V) or 1-15P (125V) and three pin plug configuration must be  
6-15P (250V) or 5-15P (125V) as designated in the U.S. National Electrical  
code handbook and the Canadian Electrical Code Part II.  
The following illustrations show the plug shapes for the U.S.A. and  
Canada, the United Kingdom, Australia, Europe and China.  
USA  
United Kingdom  
UL approved  
BS approved  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-3  
Australia  
Europe  
AS approved  
Approved by the appropriate  
agency  
Canada  
China  
CSA approved  
CCC approved  
Information for Wireless Devices  
Wireless Technology Interoperability  
The Wireless LAN is compatible with other LAN systems Direct Sequence  
Spread Spectrum (DSSS) /Orthogonal Frequency Division Multiplexing  
(OFDM) radio technology, and is compliant to:  
The IEEE 802.11 Standard on Wireless LANs (Revision a/b/g/n or b/g/  
n), as defined and approved by the Institute of Electrical and  
Electronics Engineers.  
Bluetooth® Cards are designed to be interoperable with any product with  
Bluetooth wireless technology that is based on Frequency Hopping Spread  
Spectrum (FHSS) radio technology, and is compliant to:  
Bluetooth Specification (depending on the model you purchased), as  
defined and approved by the Bluetooth Special Interest Group.  
Logo certification with Bluetooth wireless technology as defined by the  
Bluetooth Special interest Group.  
This Bluetooth product is not compatible with devices using Bluetooth  
Version 1.0B specifications.  
The wireless devices have not completed verification of connection and  
operation with all devices which are using the Wireless LAN or Bluetooth  
radio technology.  
Bluetooth and Wireless LAN devices operate within the same radio  
frequency range and may interfere with one another. If you use Bluetooth  
and Wireless LAN devices simultaneously, you may occasionally  
experience a less than optimal network performance or even lose your  
network connection.  
If you should experience any such problem, immediately turn off either one  
of your Bluetooth or Wireless LAN.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-4  
 
Please visit http://www.pc.support.global.toshiba.com, if you have any  
questions about using Wireless LAN or Bluetooth Card from TOSHIBA.  
In Europe visit http://www.toshiba-europe.com/computers/tnt/bluetooth.htm  
Wireless Devices and your health  
Wireless products, like other radio devices, emit radio frequency  
electromagnetic energy. The level of energy emitted by Wireless products  
however is far much less than the electromagnetic energy emitted by  
wireless devices like for example mobile phones.  
Because Wireless products operate within the guidelines found in radio  
frequency safety standards and recommendations, TOSHIBA believes  
Wireless products is safe for use by consumers. These standards and  
recommendations reflect the consensus of the scientific community and  
result from deliberations of panels and committees of scientists who  
continually review and interpret the extensive research literature.  
In some situations or environments, the use of Wireless products may be  
restricted by the proprietor of the building or responsible representatives of  
the organization. These situations may for example include:  
Using the Wireless products equipment on board of airplanes, or  
In any other environment where the risk of interference to other  
devices or services is perceived or identified as harmful.  
If you are uncertain of the policy that applies on the use of wireless devices  
in a specific organization or environment (e.g. airports), you are  
encouraged to ask for authorization to use the Wireless device prior to  
turning on the equipment.  
Wireless LAN Technology  
The computer’s wireless communication function supports some wireless  
communication devices.  
Only some models are equipped with both Wireless LAN and Bluetooth  
functions.  
Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a  
microwave oven or in areas subject to radio interference or magnetic  
fields. Interference from a microwave oven or other source can disrupt  
Wi-Fi or Bluetooth operation.  
Turn all wireless functionalities off when near a person who may have  
a cardiac pacemaker implant or other medical electric device. Radio  
waves may affect pacemaker or medical device operation, possibly  
resulting in serious injury. Follow the instruction for your medical  
device when using any wireless functionality.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-5  
 
Always turn off wireless functionality if the computer is near automatic  
control equipment or appliances such as automatic doors or fire  
detectors. Radio waves can cause malfunction of such equipment,  
possibly resulting in serious injury.  
It may not be possible to make a network connection to a specified  
network name using the ad hoc network function. If this occurs, the  
new network (*) will have to be configured for all computers connected  
to the same network in order to re-enable network connections.  
* Please be sure to use new network name.  
Security  
TOSHIBA strongly recommend that you enable encryption  
functionality, otherwise your computer will be open to illegal access by  
an outsider using a wireless connection. If this occurs, the outsider  
may illegally access your system, eavesdrop, or cause the loss or  
destruction of stored data.  
TOSHIBA is not liable for the loss of data due to eavesdropping or  
illegal access through the wireless LAN and the damage thereof.  
Card Specifications  
Form Factor  
Compatibility  
PCI Express Mini Card  
IEEE 802.11 Standard for Wireless LANs  
Microsoft Windows Networking  
Network Operating  
System  
Media Access  
Protocol  
CSMA/CA (Collision Avoidance) with  
Acknowledgment (ACK)  
Radio Characteristics  
Radio Characteristics of Wireless LAN module may vary according to:  
Country/region where the product was purchased  
Type of product  
Wireless communication is often subject to local radio regulations.  
Although Wireless LAN wireless networking products have been designed  
for operation in the license-free 2.4GHz and 5GHz band, local radio  
regulations may impose a number of limitations to the use of wireless  
communication equipment.  
Radio Frequency  
Band 5GHz (5150-5850 MHz) (Revision a  
and n)  
Band 2.4GHz (2400-2483.5 MHz) (Revision  
b/g and n)  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-6  
The range of the wireless signal is related to the transmit rate of the  
wireless communication. Communications at lower transmit range may  
travel larger distances.  
The range of your wireless devices can be affected when the  
antennas are placed near metal surfaces and solid high-density  
materials.  
Range is also impacted due to "obstacles" in the signal path of the  
radio that may either absorb or reflect the radio signal.  
Bluetooth wireless technology  
Some computers in this series have Bluetooth wireless communication  
function which eliminates the need for cables between electronic devices  
such as computers, printers and mobile phones. When it is enabled,  
Bluetooth provides the wireless personal area network environment which  
is safe and trustworthy, that is quick and easy.  
You cannot use the computer's built-in Bluetooth functions and an external  
Bluetooth adaptor simultaneously. For reference, Bluetooth wireless  
technology has the following features:  
Security  
Two advanced security mechanisms ensure a high level of security:  
Authentication prevents access to critical data and makes it impossible  
to falsify the origin of a message.  
Encryption prevents eavesdropping and maintains link privacy.  
Worldwide operation  
The Bluetooth radio transmitter and receiver operate in the 2.4GHz band,  
which is license-free and compatible with radio systems in most countries  
in the world.  
Radio links  
You can easily establish links between two or more devices, with these  
links being maintained even if the devices are not within a line-of-sight of  
each other.  
Radio Frequency Interference Requirements  
This device is restricted to indoor use due to its operation in the 5.15 to  
5.25GHz frequency range.  
Radio Regulatory Information  
The Wireless device must be installed and used in strict accordance with  
the manufacturer’s instructions as described in the user documentation that  
comes with the product. This product complies with the following radio  
frequency and safety standards.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-7  
 
Europe  
Restrictions for Use of 2400.0-2483.5MHz Frequencies in Europe  
France:  
Outdoor use  
Military Radiolocation  
limited to 10mW use.Refarming of the 2.4GHz band  
e.i.r.p. within the has been ongoing in recent years to  
band  
allow current relaxed regulation Full  
2454-2483.5MHz implementation planned 2012.  
Italy:  
-
For private use, a general  
authorization is required if WAS/  
RLAN’s are used outside own  
premises. For public use, a general  
authorization is required.  
Luxembourg:  
Norway:  
Implemented  
Implemented  
General authorization required for  
network and service supply.  
This subsection does not apply for  
the geographical area within a  
radius of 20 km from the centre of  
Ny-Alesund.  
Russian  
-
Only for indoor applications.  
Federation:  
Restrictions for Use of 5150-5350MHz Frequencies in Europe  
Italy:  
-
For private use, a general  
authorization is required if WAS/  
RLAN’s are used outside own  
premises.  
Luxembourg:  
Implemented  
General authorization required for  
network and service supply.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-8  
Russian  
Federation:  
Limited  
e.i.r.p 100mW. Permitted to use  
only for indoor applications, closed  
industrial and warehouse areas,  
and on board aircraft.  
1. Permitted to use for local  
networks of aircraft crew  
service communications on  
board aircraft in area of the  
airport and at all stages of  
flight.  
2. Permitted to use for public  
wireless access local networks  
on board aircraft during a flight  
at the altitude not less than  
3000m.  
Restrictions for Use of 5470-5725MHz Frequencies in Europe  
Italy:  
-
For private use, a general  
authorization is required if WAS/  
RLAN’s are used outside own  
premises.  
Luxembourg:  
Implemented  
Limited  
General authorization required for  
network and service supply  
Russian  
Federation:  
e.i.r.p 100mW. Permitted to use  
only for indoor applications, closed  
industrial and warehouse areas,  
and on board aircraft.  
1. Permitted to use for local  
networks of aircraft crew  
service communications on  
board aircraft in area of the  
airport and at all stages of  
flight.  
2. Permitted to use for public  
wireless access local networks  
on board aircraft during a flight  
at the altitude not less than  
3000m.  
To remain in conformance with European spectrum usage laws for  
Wireless LAN operation, the above 2.4GHz and 5GHz channel limitations  
apply for outdoor usage. The user should use the wireless LAN utility to  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-9  
check the current channel of operation. If operation is occurring outside of  
the allowable frequencies for outdoor use, as listed above, the user must  
contact the applicable national spectrum regulator to request a license for  
outdoor operation.  
Canada - Industry Canada (IC)  
This device complies with RSS 210 of Industry Canada. Operation is  
subject to the following two conditions: (1) this device may not cause  
interference, and (2) this device must accept any interference, including  
interference that may cause undesired operation of this device.  
The term “IC” before the equipment certification number only signifies that  
the Industry Canada technical specifications were met.  
USA-Federal Communications Commission (FCC)  
This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation.  
Refer to the FCC information section for the detailed information.  
The radiated output power of the Wireless device is far below the FCC  
radio frequency exposure limits. Nevertheless, the Wireless device shall be  
used in such a manner that the potential for human contact during normal  
operation is minimized.  
In the usual operating configuration, the distance between the antenna and  
the user should not be less than 20cm. Please refer to the computer user’s  
manual for the details regarding antenna location.  
The installer of this radio equipment must ensure that the antenna is  
located or pointed such that it does not emit RF field in excess of Health  
Canada limits for the general population; consult Safety Code 6, obtainable  
from Health Canada’s website www.hc-sc.gc.ca  
Taiwan  
Article 12  
Without permission granted by the NCC, any  
company, enterprise, or user is not allowed to  
change frequency, enhance transmitting power or  
alter original characteristic as well as performance  
to an approved low power radio frequency devices.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-10  
Article 14  
The low power radio-frequency devices shall not  
influence aircraft security and interfere legal  
communications;  
If found, the user shall cease operating  
immediately until no interference is achieved.  
The said legal communications means radio  
communications is operated in compliance with the  
Telecommunications Act.  
The low power radio-frequency devices must be  
susceptible with the interference from legal  
communications or ISM radio wave radiated  
devices.  
Using this equipment in Japan  
In Japan, the frequency bandwidth of 2,400MHz to 2,483.5MHz for second  
generation low-power data communication systems such as this equipment  
overlaps that of mobile object identification systems (premises radio station  
and specified low-power radio station).  
1. Important notice  
The frequency bandwidth of this equipment may operate within the same  
range as industrial devices, scientific devices, medical devices, microwave  
ovens, licensed radio stations and non-licensed specified low-power radio  
stations for mobile object identification systems (RFID) used in factory  
production lines (Other Radio Stations).  
1. Before using this equipment, ensure that it does not interfere with any  
of the equipment listed above.  
2. If this equipment causes RF interference to other radio stations,  
promptly change the frequency being used, change the location of  
use, or turn off the source of emissions.  
3. Contact an authorized TOSHIBA service provider if you have  
problems with interference caused by this product to Other Radio  
Stations.  
2. Indication for Wireless LAN  
The indication shown below appears on this equipment.  
(1) (2) (3) (4)  
DS/O
(5)  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-11  
1. 2.4 : This equipment uses a frequency of 2.4GHz.  
2. DS : This equipment uses DS-SS modulation.  
3. OF : This equipment uses OFDM modulation.  
4. 4 : The interference range of this equipment is less than 40m.  
5.  
: This equipment uses a frequency bandwidth from 2,400MHz  
to 2,483.5MHz. It is possible to avoid the band of mobile object  
identification systems.  
3. Indication for Bluetooth  
The indication shown below appears on this equipment.  
(1) (2) (3)  
2.4 FH  
(4)  
1. 2.4 : This equipment uses a frequency of 2.4 GHz.  
2. FH : This equipment uses FH-SS modulation.  
3. 1 : The interference range of this equipment is less than 10m.  
4.  
: This equipment uses a frequency bandwidth from 2,400 MHz  
to 2,483.5 MHz. It is impossible to avoid the band of mobile object  
identification systems.  
4. About the JEITA  
5GHz Wireless LAN supports W52/W53/W56 Channel.  
Device Authorization  
This device obtains the Technical Regulation Conformity Certification and it  
belongs to the device class of radio equipment of low-power data  
communication system radio station stipulated in the Telecommunications  
Business Law of Japan.  
Intel® Centrino® Wireless-N 2230 Wireless LAN and Bluetooth  
The Name of the radio equipment: 2230BNHMW  
DSP Research, Inc.  
Approval Number: D111287003  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-12  
Realtek® RTL8188EE 802.11b/g/n Wireless LAN  
The Name of the radio equipment: RTL8188EE  
DSP Research, Inc.  
Approval Number: D120135003  
Atheros WB222 802.11a/b/n Wireless LAN  
The Name of the radio equipment: WB222  
DSP Research, Inc.  
Approval Number: D111398003  
Atheros QCWB335 Wireless Network Adapter b/g/n and Bluetooth  
The Name of the radio equipment: QCWB335  
DSP Research, Inc.  
Approval Number: D120156003  
The following restrictions apply:  
Do not disassemble or modify the device.  
Do not install the embedded wireless module into other device.  
Radio approvals for wireless devices  
This equipment is approved to the radio standard by the countries/regions  
in the following table.  
If you use this equipment in the countries/regions which are not listed in the  
table blow, please contact TOSHIBA Support.  
As of March 2013  
Austria  
Belgium  
Bulgaria  
Denmark  
Germany  
Iceland  
Italy  
Canada  
Estonia  
Greece  
India  
Cyprus  
Czech Rep  
France  
Finland  
Hong Kong  
Indonesia  
Korea  
Hungary  
Ireland  
Japan  
Latvia  
Liechtenstein  
Monaco  
Poland  
Lithuania  
Netherlands  
Portugal  
Spain  
Luxemburg  
Norway  
Malta  
Philippines  
Slovak Republic  
Switzerland  
Romania  
Sweden  
Slovenia  
UK  
USA  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-13  
Legal Footnotes  
Non-applicable Icons  
Certain computer chassis are designed to accommodate all possible  
configurations for an entire product series. Therefore, please be aware that  
your selected model may not have all the features and specifications  
corresponding to all of the icons or switches shown on the computer  
chassis.  
CPU  
Central Processing Unit (CPU) Performance Legal Footnotes.  
CPU performance in your computer product may vary from specifications  
under the following conditions:  
use of certain external peripheral products  
use of battery power instead of AC power  
use of certain multimedia, computer generated graphics or video  
applications  
use of standard telephone lines or low speed network connections  
use of complex modeling software, such as high end computer aided  
design applications  
use of several applications or functionalities simultaneously  
use of computer in areas with low air pressure (high altitude >1,000  
meters or >3,280 feet above sea level)  
use of computer at temperatures outside the range of 5°C to 30°C  
(41°F to 86°F) or >25°C (77°F) at high altitude (all temperature  
references are approximate and may vary depending on the specific  
computer model - please refer to your computer documentation or visit  
the TOSHIBA website at www.pcsupport.toshiba.com for details).  
CPU performance may also vary from specifications due to design  
configuration.  
Under some conditions, your computer product may automatically shut-  
down. This is a normal protective feature designed to reduce the risk of lost  
data or damage to the product when used outside recommended  
conditions. To avoid risk of lost data, always make back-up copies of data  
by periodically storing it on an external storage medium. For optimum  
performance, use your computer product only under recommended  
conditions. Read additional restrictions in your product documentation.  
Contact TOSHIBA technical service and support, refer to TOSHIBA support  
section for more information.  
64-Bit Computing  
Certain 32-bit device drivers and/or applications may not be compatible  
with a 64-bit CPU/operating system and therefore may not function  
properly.  
User's Manual  
7-14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Memory (Main System)  
Part of the main system memory may be used by the graphics system for  
graphics performance and therefore reduce the amount of main system  
memory available for other computing activities. The amount of main  
system memory allocated to support graphics may vary depending on the  
graphics system, applications utilized, system memory size and other  
factors.  
If your computer is configured with more than 3 GB memory, the memory  
might be displayed as approximately 3 GB only (depending on the  
computer’s hardware specifications).  
This is correct because the operating system usually displays the available  
memory instead of the physical memory (RAM) built into the computer.  
Various system components (like the video adapter’s GPU and PCI  
devices like Wireless LAN, etc.) require their own memory space. Since a  
32-bit operating system cannot address more than 4 GB of memory, these  
system resources overlap the physical memory. It is a technical limitation  
that the overlapped memory is not available to the operating system. Even  
though some tools might display the actual physical memory built into your  
computer, the memory available to the operating system will still be  
approximately 3 GB only.  
Computers configured with a 64-bit operating system can address 4 GB or  
more of system memory.  
Battery Life  
Battery life may vary considerably depending on product model,  
configuration, applications, power management settings and features  
utilized, as well as the natural performance variations produced by the  
design of individual components. Published battery life numbers are  
achieved on select models and configurations tested by TOSHIBA at the  
time of publication. Recharge time varies depending on usage. Battery may  
not charge while computer is consuming full power.  
After going through many charge and discharge cycles, the battery will lose  
its ability to perform at maximum capacity and will need to be replaced.  
This is a normal phenomenon for all batteries. To purchase a new battery  
pack, see the accessories information that is shipped with your computer.  
Hard Disk Drive (HDD) Capacity  
1 Gigabyte (GB) means 109 = 1,000,000,000 bytes using powers of 10.  
The computer operating system, however, reports storage capacity using  
powers of 2 for the definition of 1 GB = 230 = 1,073,741,824 bytes, and  
therefore shows less storage capacity. Available storage capacity will also  
be less if the product includes one or more pre-installed operating systems,  
such as Microsoft Operating System and/or pre-installed software  
applications, or media content. Actual formatted capacity may vary.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-15  
LCD  
Over a period of time, and depending on the usage of the computer, the  
brightness of the LCD screen will deteriorate. This is an intrinsic  
characteristic of LCD technology.  
Maximum brightness is only available when operating in AC power mode.  
Screen will dim when the computer is operated on battery power and you  
may not be able to increase the brightness of the screen.  
Graphics Processing Unit (GPU)  
Graphics processing unit (GPU) performance may vary depending on  
product model, design configuration, applications, power management  
settings and features utilized. GPU performance is only optimized when  
operating in AC power mode and may decrease considerably when  
operating in battery power mode.  
Total Available Graphics Memory is the total of, as applicable, Dedicated  
Video Memory, System Video Memory and Shared System Memory.  
Shared System Memory will vary depending on system memory size and  
other factors.  
Wireless LAN  
The transmission speed over the wireless LAN and the distance over which  
wireless LAN can reach may vary depending on surrounding  
electromagnetic environment, obstacles, access point design and  
configuration, and client design and software/hardware configurations.  
The actual transmission speed will be lower than the theoretical maximum  
speed.  
Copy Protection  
Applicable copy protection standards included in certain media may  
prevent or limit recording or viewing of the media.  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-16  
Index  
opening 2-5  
A
AC adaptor  
additional 4-41  
connecting 2-3  
DC IN 19V jack 3-2  
Display controller 3-11  
Documentation list 2-1  
Dual Pointing Device  
B
DVD Super Multi drive  
using  
Battery  
writing  
extending life 4-25  
monitoring capacity 4-23  
real time clock 3-10, 4-21  
save mode 5-5  
E
H
K
Equipment checklist 2-1  
Battery indicator  
External monitor  
problems 6-13  
Battery pack  
replacing 4-25  
Hard disk drive  
C
D
Cleaning the computer 1-13  
Keyboard  
function keys 4-4  
problems 6-6  
DC IN  
Windows special keys 4-5  
Display  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index-1  
 
Hibernation Mode 2-10  
Shut Down mode 2-8  
Sleep Mode 2-9  
L
LAN  
turning on 2-6  
Problems  
AC power 6-5  
M
Analyzing the problem 6-2  
Dual Pointing device 6-8  
External monitor 6-13  
Hardware and system  
Internal display panel 6-7  
Keyboard 6-6  
Media care  
Card care 4-35  
Memory card care 4-35  
Memory  
installing 4-29  
removing 4-32  
Memory Media Card 6-8  
Overheating power  
down 6-5  
memory media card  
inserting 4-36  
removing 4-36  
Real Time Clock 6-6  
USB device 6-10  
Memory media slot 4-33  
Moving the computer 1-13  
MultiMediaCard  
removing 4-36  
R
S
P
Recovery hard disk drive 5-18  
Recovery Media 5-16, 5-18  
Restarting the computer 2-8  
Password  
power on 5-5  
Starting the computer by  
password 5-8  
Supervisor 5-8  
SD/SDHC/SDXC Card  
Pointing Device  
Sleep Mode  
Power  
conditions 3-13  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index-2  
Sound system  
problems 6-12  
T
U
USB device  
problems 6-10  
V
Video mode 4-42  
W
Web Camera 3-8  
Wireless communication 7-5  
User's Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index-3  

Techno Source Handheld Game System 31050 User Manual
Teledyne Work Light t100h User Manual
Toro Marine Radio P220G series User Manual
Toshiba All in One Printer E STUDIO190F User Manual
Toshiba Computer Drive U2P User Manual
Toshiba CRT Television 27A62 User Manual
Toshiba Home Theater System SD C67HTSU User Manual
Tricity Bendix Cooktop SE554 User Manual
Uniden Scanner UBC92XLT User Manual
ViewSonic Crib Toy VS11949 User Manual