Toshiba DVR SD 36VESE User Manual

DVD VIDEO PLAYER &

VIDEO CASSETTE RECORDER

SD-36VESE

User’s Manual

PAL

Download from Www.Somanuals.com. All Manuals Search And Download.

Disc Type and Characteristics

This DVD-VCR is capable of playing the following types of discs with the corresponding logos:

Recording Types

Disc Size

Max. Playing Time

Characteristics

Disc Types (Logos)

DVD contains excellent sound and

video due to Dolby Digital, DTS and

MPEG-2 system.

Single-sided 240 min.

Double-sided 480 min.

DVD

12 Cm

Audio

Various screen and audio functions

can be easily selected through the on-

screen menu.

Video

Single-sided 80 min.

8 Cm

Double-sided 160 min.

CD is recorded as a Digital Signal with

better audio quality, less distortion and

less deterioration of audio quality over

time.

AUDIO-CD

VIDEO-CD

12 Cm

8 Cm

74 min.

20 min.

Audio

Video with CD sound, VHS quality &

MPEG-1 compression technology.

74 min.

20 min.

12Cm

8 Cm

Audio

Video

DO NOT play CD-ROM, CD-I and DVD-ROM in this player!

(CDGs play audio only, not graphics.)

It may not play CD-R,CD-RW and DVD-R, -RW, DVD+R, +RW in all cases due to the type of disc or condition of the recording.

The recorded disc may not run as playback depends on the recording speed.

Do not run the player with two discs loaded at the same time.

Play Region Number

Disc Markings

Both the DVD-VCR and the

discs are coded by region.

These regional codes must

match in order for the disc to

play. If the codes do not match,

the disc will not be played.

Play Region Number

PAL

PAL colour system in Europe, Australia, New Zealand, etc.

NTSC

NTSC broadcast system in U.S.A, Canada, Korea, Japan, etc.

Dolby Digital disc

Stereo disc

The Region Number for this

player is described on the

rear panel of the player.

STEREO

DIGITAL

SOUND

Digital Audio disc

DTS disc

Disc contains a Divx software product

English - 3

Download from Www.Somanuals.com. All Manuals Search And Download.

Screen Messages . . . . . . . . . . . . . . . . . . . . . . 24

Selecting the Cassette Type . . . . . . . . . . . . . . 25

Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Selecting the Recording Speed . . . . . . . . . . . . 26

Protecting a Recorded Cassette . . . . . . . . . . . 26

Recording a Programme Immediately . . . . . . . 27

Recording a Programme with

Contents

Automatic Stop . . . . . . . . . . . . . . . . . . . . . . . . 27

Recording from Another VCR or Camcorder . . . . . 28

Using the Assemble Edit Function . . . . . . . . . . 28

Using the Timer Programming Feature . . . . . . 29

Checking a Preset Recording . . . . . . . . . . . . . 31

Cancelling a Preset Recording . . . . . . . . . . . . 31

ꢀ

Getting Started

Safety Precautions . . . . . . . . . . . . . . . . . . . . . 2

Disc Type and Characteristics . . . . . . . . . . . . . 3

Overviews . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Front View of the DVD-VCR . . . . . . . . . . . . . . . . .

Rear View of the DVD-VCR . . . . . . . . . . . . . . . . .

Display Indicators . . . . . . . . . . . . . . . . . . . . . . . .

ꢀ

Playing Back

Playing a Cassette . . . . . . . . . . . . . . . . . . . . . 32

Adjusting Picture Alignment Manually . . . . . . . 32

Selecting the Audio Output Mode . . . . . . . . . . 33

Playing a Cassette in Slow Motion . . . . . . . . . 33

Playing a Sequence Frame by Frame . . . . . . . 33

Playing a Sequence at Variable Speeds . . . . . 33

Searching for a Specific Sequence . . . . . . . . . 34

Using the Tape Counter . . . . . . . . . . . . . . . . . 36

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Inserting Batteries in the Remote Control . . . . 6

Tour of the Remote Control . . . . . . . . . . . . . . . . .

ꢀ

Connections

Quick Overview . . . . . . . . . . . . . . . . . . . . . . .

Connecting DVD-VCR to the TV using the

RF Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Connecting DVD-VCR to the TV using the

SCART Cable . . . . . . . . . . . . . . . . . . . . . . . . .

Connecting DVD-VCR to a Satellite Receiver

ꢀ

DVD Fuctions

Setting Up the Language Features . . . . . . . . . 37

Setting Up the Audio Options . . . . . . . . . . . . . 39

Setting Up the Display Options . . . . . . . . . . . . 40

Setting Up the Parental Control . . . . . . . . . . . 41

DivX(R) Registration . . . . . . . . . . . . . . . . . . . . 43

Setting Up the DVD Function . . . . . . . . . . . . . 43

Special Playback Features . . . . . . . . . . . . . . . 44

Using the Display Function . . . . . . . . . . . . . . . 45

Adjusting the Aspect Ratio (EZ View) . . . . . . . 46

Selecting the Subtitle Language . . . . . . . . . . . 47

Selecting the Audio Language . . . . . . . . . . . . 47

Changing the Camera Angle . . . . . . . . . . . . . . 48

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Repeat Chapter/Title . . . . . . . . . . . . . . . . . . . . 49

A to B Repeat . . . . . . . . . . . . . . . . . . . . . . . . . 50

MP3 Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Program & Random Play (CD/MP3) . . . . . . . . . . . 52

Picture CD Playback . . . . . . . . . . . . . . . . . . . . 53

DivX/MPEG4 Playback . . . . . . . . . . . . . . . . . . 55

DivX/MPEG4 Special Playback Features . . . . 55

or Other Equipment . . . . . . . . . . . . . . . . . . . . 10

Connecting DVD-VCR to the TV using the

Audio/Video Cable . . . . . . . . . . . . . . . . . . . . . 10

Connecting DVD-VCR to the TV using the

S-Video Cable . . . . . . . . . . . . . . . . . . . . . . . . 11

AV Receiver Connections . . . . . . . . . . . . . . . . 11

Connecting an Audio/Video Input Cable . . . . . 12

Plug & Auto Setup . . . . . . . . . . . . . . . . . . . . . 12

ꢀ

Settings

Tuning Your Television for the DVD-VCR . . . . 14

Setting the Date and Time . . . . . . . . . . . . . . . 15

Setting the Menu Language . . . . . . . . . . . . . . 16

Presetting the Stations Automatically . . . . . . . 16

Presetting the Stations Manually . . . . . . . . . . . 18

Clearing a Preset Station . . . . . . . . . . . . . . . . 19

Changing the Preset Station Table . . . . . . . . . 20

Selecting the RF OUT Sound Mode(B/G-D/K) . 21

Setting the VCR Output Channel . . . . . . . . . . 21

ꢀ

Reference

ꢀ

VCR Functions

Technical Specifications . . . . . . . . . . . . . . . . . 58

Troubleshooting Guide (VCR) . . . . . . . . . . . . . 59

Troubleshooting Guide (DVD) . . . . . . . . . . . . . 60

Selecting the Colour Mode . . . . . . . . . . . . . . . 22

NICAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Intelligent Picture Control . . . . . . . . . . . . . . . . 23

Auto Power off . . . . . . . . . . . . . . . . . . . . . . . . 24

4 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Overviews

Front View of the DVD-VCR

9 10 11

13 14

15 16

1. DVD DECK

9. FAST FORWARD / SKIP NEXT BUTTON

10. RECORD BUTTON

2. OPEN/CLOSE BUTTON

3. VIDEO CASSETE COMPARTMENT

4. EJECT BUTTON

11. EZ VIEW BUTTON

12. FRONT PANEL DISPLAY

5. ON/STANDBY BUTTON

6. REWIND/SKIP BACK BUTTON

7. STOP BUTTON

13. PROGRAMME SELECTION BUTTON

14. DVD/VCR SELECTION BUTTON

15. AUX VIDEO INPUT JACK

16. AUX AUDIO L/R INPUT JACK

8. PLAY/STILL BUTTON

Rear View of the DVD-VCR

1. AUDIO L, R OUT JACKS

2. AERIAL IN CONNECTOR

7. AV1 (EURO AV) IN/OUT SCART

(EURO-21) JACK

3. AV2 (DEC./EXT.) SCART (EURO-21) JACK

4. AUDIO L, R OUT JACKS (DVD ONLY)

5. VIDEO OUT JACK

8. DIGITAL AUDIO OUT JACKS (COAXIAL)

9. S-VIDEO OUT JACK

6. OUT TO TV CONNECTOR

Display Indicators

1. The DVD Deck is active.

2. Disc is loaded.

3. The time, counter position, current deck

status is displayed.

4. VHS tape is inserted.

5. The VCR Deck is active.

6. A Timer Recording is programmed or in

progress.

English - 5

Download from Www.Somanuals.com. All Manuals Search And Download.

Accessories

Inserting Batteries in

the Remote Control

You have just purchased a TOSHIBA DVD-VCR.

Together with your DVD-VCR, you will find the following

accessories in the box.

You must insert or replace the batteries in the remote

control when you:

• Purchase the DVD-VCR

• Find that the remote control is no longer working

correctly

Push the tab in the direction of the arrow to

release the battery compartment cover on the

rear of the remote control.

Batteries for

Remote

Control

Remote Control

Insert two AA, R6 or equivalent batteries, taking

care to respect the polarities:

• + on the battery with + on the remote control

• – on the battery with – on the remote control

RF Cable

Owner’s

Instructions

• Do not mix different battery types

(manganese and alkaline for example).

Replace the cover by aligning it with the base of

the remote control and pushing it back into

place.

6 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

6. CLEAR

Used to clear a preset TV station.

Tour of the Remote Control

Used to cancel a preset recording.

Used to cancel a preset mark.

Used to set the tape counter to zero.

Used to resume normal play during repeat play.

7. DVD

Used to operate DVD.

8. VCR

Used to operate VCR.

9. AUDIO

Used to access various audio functions.

10. TRK … / †

Used to adjust picture alignment manually to

obtain the best possible picture during playback.

11. SEARCH/SKIP (œœ

√√

lœœ √√l)

Used to search forward or backward through a disc.

Used to skip the title, chapter, or track.

12. STOP (

)

■

Used to stop during playback.

13. MENU

Used to display the on-screen menu.

14. OK œ / √

… / †

Used to control the cursor in the on-screen menu

and confirm your choice.

15. REC (

)

Used to make a recording on cassette.

●

16. SPEED

Used to select the recording speed.

17. OPEN/CLOSE

Used to open and close the disc and video

cassette tray.

18. DISPLAY

Used to display the current setting or disc status.

19. SHUTTLE

Used to play a sequence at variable speeds.

20. TIMER

Used to activate the timer recording of a

programme.

21. ANGLE

Used to access various camera angles on a DVD.

IPC (Intelligent Picture Control)

Used to adjust the sharpness of the picture.

22. TV/VCR

1. ON/STANDBY

Used to turn the power on or off.

Used to select TV or VCR.

23. INPUT SEL.

Used to select an external input signal.

2. Number Buttons

3. EZ VIEW

24. PROG /

Used to select a TV programme.

Used to adjust the aspect ratio on a disc.

4. MODE

25. F.ADV/STEP

Used to advance a sequence frame by frame.

Used to select the programme or random play.

REPEAT

Used to allow the repeat play a title, chapter,

track, disc or A-B.

26. PLAY/PAUSE ( √ll

Used to play or pause during playback.

27. RETURN

)

5. MARK

Used to return to a previous menu.

Used to mark a position during playback a disc.

28. DISC MENU

Used to display a disc menu.

Used to search for a specific sequence.

29. SUBTITLE

Used to change the DVD’s subtitle language.

English - 7

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Overview

Connections

A Quick overview presented in this guide will give

you enough information to start using the DVD-VCR.

Connecting DVD-VCR to the TV using the RF

Cable

Connecting DVD-VCR to the TV using the

SCART Cable

Connecting DVD-VCR to a Satellite

Receiver or Other Equipment

Connecting DVD-VCR to the TV using the

Audio/Video Cable

Connecting DVD-VCR to the TV using the

S-Video Cable

•

Quick Overview . . . . . . . . . . . . . . . . . . . . . 8

AV Receiver Connections

Connecting an Audio/Video Input Cable

Plug & Auto Setup

Connecting DVD-VCR to the TV using the

RF Cable . . . . . . . . . . . . . . . . . . . . . . . . . . 9

•

Connecting DVD-VCR to the TV using the

SCART Cable . . . . . . . . . . . . . . . . . . . . . . . 9

Connecting DVD-VCR to a Satellite Receiver or

Other Equipment . . . . . . . . . . . . . . . . . . . . 10

Connecting DVD-VCR to the TV using the

Audio/Video Cable . . . . . . . . . . . . . . . . . . 10

•

Connecting DVD-VCR to the TV using the

S-Video Cable . . . . . . . . . . . . . . . . . . . . . . 11

•

AV Receiver Connections . . . . . . . . . . . . . . 11

Connecting an Audio/Video Input Cable . . . . . 12

Plug & Auto Setup . . . . . . . . . . . . . . . . . . . 12

8 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting DVD-VCR

to the TV using the

SCART Cable

You can connect your DVD-VCR to the television

using the SCART cable if the appropriate input is

available on the television. You thus:

Connecting DVD-VCR

to the TV using the

RF Cable

To receive television programmes a signal must be

received from one of the following sources:

• An outdoor aerial

• An indoor aerial

• Obtain better quality sound and pictures

• Simplify the setting up procedure of your DVD-VCR

• A cable television network

• A satellite receiver

ꢁ Regardless of the type of connection chosen,

you must always connect the RF Cable

supplied. Otherwise, no picture will be visible on

the screen when the DVD-VCR is switched off.

ꢁ Make sure that both the television and the

DVD-VCR are switched off before connecting

the cables.

Note

ꢁ Make sure that both the television and the

DVD-VCR are switched off before

connecting the cables.

Note

Connect the Aerial Cable.

Remove the aerial or network input cable from

the television.

Connect one end of the SCART cable to the AV1

(EURO AV) jack on the rear of the DVD-VCR.

Connect this cable to the 75Ω coaxial jack

marked

on the rear of your DVD-VCR.

Plug the other end into the appropriate

connector on the television.

Plug the RF Cable supplied into

on your DVD-VCR.

, the jack

Connecting the Audio Output Cable

You can connect your DVD-VCR to a Hi-Fi system.

❚

Plug the other end of the RF Cable into the

connector previously used for the aerial on the

television.

Example:You wish to take advantage of the quality of

your Hi-Fi stereo system when watching a

disc play.

Plug the audio output cable into the audio

connectors on the rear of your DVD-VCR.

Plug the other end of the audio cable into the

appropriate input connectors on your Hi-Fi

stereo system.

Aerial

Aerial cable

Aerial

RF cable

SCART Cable

(not supplied)

English - 9

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting DVD-VCR

to the TV using the

Audio/Video Cable

You can connect your DVD-VCR to the television using

the audio/video cable if the appropriate input is available

on the television.

Connecting DVD-VCR to a

Satellite Receiver or Other

Equipment

You can connect your DVD-VCR to a Satellite

receiver or other DVD-VCR using the SCART cable

if the appropriate outputs are available on the

equipment chosen. The following illustrations give a

few examples of the connection possibilities.

Connect one end of the video cable into the

VIDEO output jack on the rear of the DVD-VCR.

AV2 IN: By means of 21-pin Scart Cable

Plug the SCART Cable with satellite receiver or

other equipment into the AV2 (DEC./EXT.) jack

on the rear of the DVD-VCR.

After making this connection, select the source

by pressing the INPUT SEL. button for the AV2

input sources.

Plug the other end of the video cable into the

appropriate input connector on the television.

Connect one end of the audio cable supplied into

the AUDIO output jacks on the rear of the DVD-

VCR.

•Take care to respect the colour coding of the

left and right channels.

AV(EURO AV) : By means of 21-pin Scart

Cable

Connect the end of the SCART cable to the

AV1(EURO AV) jack on the rear of the DVD-

VCR. Plug the other end into the appropriate

connector on the television. When using the

SCART cable, set the TV to audio/video mode

(AV).

Plug the other end of the audio cables into the

appropriate input connectors on the television.

By means of RF Cable

After making this connection, you must preset

the station received through the satellite tuner.

RF output channel of the satellite receiver

should be adjusted away from channel 36,

which is used by the DVD-VCR, e.g. re-adjust

to channel 33.

Aerial

Satellite Receiver or other Equipment

Aerial cable

SCART Cable

(not supplied)

RF cable

10 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting DVD-VCR to

the TV using the

AV Receiver

Connections

S-Video Cable

You will enjoy high quality images. S-Video seperates

the picture element into black and white(Y) and

colour(C) signals to present clearer images than regular

video input mode.

To take full advantage of the movie theater experience

that DVD offers, you may want to connect your DVD-

VCR to a complete Surround Sound system, including

an A/V Receiver and six Surround Sound speakers.

If your A/V receiver is equipped with a Dolby Digital

Decoder, you have the option to bypass the DVD-VCR’s

built-in Dolby Digital Decoder. Use the Digital Audio Out

connection below.

Connect one end of the S-Video cable into the

S-VIDEO output jack on the rear of the DVD-VCR.

Plug the other end of the S-Video cable into the

appropriate input connector on the television.

Connect a Digital Audio coaxial cable from the

Digital Audio Out jacks on the panel of the DVD-

VCR to their corresponding Digital Audio Input

jacks on your A/V Receiver:

Connect one end of the AUDIO LINE output cable

supplied into the AUDIO LINE output jacks on the

rear of the DVD-VCR.

•Take care to respect the colour coding of the left

and right channels.

Plug the other end of the audio cables into the

appropriate input connectors on the television.

ꢁ Use the S-Video connection method only for

the DVD.

Note

Digital Audio out

Jack

To Digital Audio Input of an A/V

Receiver with a Dolby, MPEG2, DTS,

Digital Decoder

English - 11

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting an

Audio/Video Input

Cable

Plug & Auto Setup

Your DVD-VCR will automatically set itself up when it

is plugged into the mains for the first time.

TV stations will be stored in memory. The process

takes a few minutes. Your DVD-VCR will then be

ready for use.

You can connect other audio/video equipment to your

DVD-VCR using audio/video cables if the appropriate

outputs are available on the equipment chosen.

Examples : • You wish to copy a video cassette with

the help of a second VCR.

• You wish to play back and/or copy

pictures taken with a camcorder

• Make sure that both the external devices

and the DVD-VCR are switched off

before connecting the cables.

Connect the RF Cable as indicated on page 9.

(Connecting Your DVD-VCR to the TV Using

the RF Cable)

Connect one end of the video cable into the

VIDEO input jack on the front of the DVD-VCR.

Plug the DVD-VCR into the mains.

• “AUTO” in the front panel display flickers.

Plug the other end of the video cable into the

appropriate output connector on the other

system (VCR or Camcorder etc).

Connect one end of the audio cable supplied into

the AUDIO input jacks on the front of the DVD-

VCR.

•Take care to respect the colour coding of the

left and right channels.

Start the auto setup.

Plug the other end of the audio cable into the

appropriate output connectors on the other

system (VCR, camcorder etc).

Auto Setup will be

started.

Check antenna and TV

cable connection.

RETURN

Start the auto scanning.

The number of stations automatically stored by

the DVD-VCR depends on the number of

stations that it has found.

Auto Setup

Please Wait

10%

√√

RETURN

12 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

The current time and date are displayed

automatically.

Clock Set

SETUP

Time

Date

Year

DVD

12 : 00

01 / JAN

/ 2005 SAT

: On

VCR

PROG

FUNC

Auto Clock

RETURN

Refer to “Setting the Date and Time” to change

the date and time. (See page 15)

ꢁNow, you only have to switch the DVD-VCR

on and it is ready for use.

Note

ꢁFunction for “Plug & Auto Set Up” is fixed

already. So if you want to change this fixed

one, you can change. (refer to “Presetting

the Stations Manually” page 18)

English - 13

Download from Www.Somanuals.com. All Manuals Search And Download.

Tuning Your Television

for the DVD-VCR

Settings

You must tune your television for the DVD-VCR only

if you are using the RF cable.

To view pictures from your DVD-VCR when a Scart

cable is used, the television must be set to the

audio/video mode (AV).

Switch on the television.

Switch on the DVD-VCR by pressing the

/I ON/STANDBY on the front of the DVD-VCR

or ON/STANDBY on the remote control.

Select a programme position on the television

to be reserved for use with your DVD-VCR.

Insert the video cassette in the DVD-VCR.

Check that the DVD-VCR starts reading the

cassette; if not, press the √II button.

Start a scan on your television or set the

television to UHF channel 36.

Fine tune the television until the pictures and

sound are obtained clearly.

When the picture and sound are perfectly clear,

store this channel at the desired programme

position on the television.

That programme is now reserved for use with

your DVD-VCR.

•Tuning Your Television for the DVD-VCR . . 14

•Setting the Date and Time . . . . . . . . . . . . . . 15

•Setting the Menu Language . . . . . . . . . . . . . 16

•Presetting the Stations Automatically . . . . . 16

•Presetting the Stations Manually . . . . . . . . . 18

•Clearing a Preset Station . . . . . . . . . . . . . . . 19

•Changing the Preset Station Table . . . . . . . . 20

•Selecting the RF OUT Sound Mode (B/G-D/K) . 21

•Setting the VCR Output Channel . . . . . . . . . 21

14 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the œ or √ button to select the hour,

minutes, day, month, and year.

The selected option is highlighted.

Press the … or † button to set them.

The day of the week is displayed automatically.

Press the OK button.

Setting the Date and

Time

Clock Set

Your DVD-VCR contains a 24-hour clock and

calendar used to:

SETUP

Time

Date

Year

DVD

• Automatically stop programme recording

• Preset your DVD-VCR to record a programme

automatically

12 : 00

01 / JAN

/ 2005 SAT

: On

VCR

PROG

FUNC

Auto Clock

You must set the date and time when:

• You purchase the DVD-VCR.

RETURN

• Do not forget to reset the time when you change

clocks from winter to summer time and vice versa.

• You can hold the … or † button to scroll

more quickly through the values.

• Press the MENU button to exit the menu.

Press the MENU button, then press the OK or

√ button.

Setup

Setting the Clock Automatically

❚

√

SETUP

DVD

Language

Clock

: English

Press the œ or √ button to select Auto Clock.

Press the … or † button to select On.

Install

User Set

VCR

PROG

FUNC

Auto Power Off : Off

Screen Messages : On

Clock Set

SETUP

RETURN

Time

Date

Year

DVD

12 : 00

01 / JAN

/ 2005 SAT

: On

VCR

PROG

FUNC

Auto Clock

Press the … or † button to select Clock, then

press the OK or √ button.

The Clock Set menu is displayed.

RETURN

Clock Set

SETUP

Time

Date

Year

DVD

12 : 00

01 / JAN

/ 2005 SAT

: On

VCR

PROG

FUNC

Auto Clock

RETURN

English - 15

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting the Menu

Language

Presetting the Stations

Automatically

You do not need to preset the stations if you have

already set them automatically (refer to “Plug & Auto

Set Up” on page 12).

Press the MENU button, then press the OK or

√ button.

The Language Set is highlighted.

Your DVD-VCR contains a built-in tuner used to

receive television broadcasts.

You must preset the stations received through the

tuner. This can be done:

Setup

• Plug & Auto Set up (refer to page 12)

• Automatically

• Manually (refer to page 18)

SETUP

DVD

Language

Clock

: English

√

Install

You can store up to 80 stations.

User Set

VCR

PROG

FUNC

Auto Power Off : Off

Screen Messages : On

Press the MENU button, then press the OK or

√ button.

RETURN

Setup

Language

Clock

: English

√

SETUP

Press the OK or √ button again.

The Language Set menu is displayed.

DVD

Install

User Set

VCR

PROG

FUNC

Auto Power Off : Off

Screen Messages : On

Language Set

√ English

Français

Deutsch

Español

Italiano

RETURN

Press the … or † button to select Install, then

press the OK or √ button.

Nederlands

The Install menu is displayed.

RETURN

Install

Auto Setup

√

SETUP

DVD

Press the … or † button to select desired

language, then press the OK or √ button.

Manual Setup

• Press the MENU button to exit the menu.

VCR

PROG

FUNC

RETURN

16 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the OK button to start the auto scanning.

The message Please Wait is displayed.

Press the … or † button to select Auto Setup,

then press the OK or √ button.

The Country Selection menu is displayed.

Press the œ/√, …/† buttons to select your

country.

Auto Setup

Please Wait

10%

Country Selection

√√

FIN

Others

RETURN

•The first frequency band is scanned and the

first station found is displayed and stored.

Then the DVD-VCR searches for the second

station and so on.

When the automatic scanning procedure has

finished, the DVD-VCR switches automatically

to programme 1.

RETURN

•Refer to following abbreviation table when

selecting “Country”.

A(Austria)

NL(Netherlands) S(Sweden) PL(Poland)

B(Belgium)

I(Italy)

CH(Swiss) CZ(Czech)

TR(Turkey) Others

GR(Greece)

•If you wish to cancel the auto scanning before

the end, press the MENU button.

DK(Denmark) N(Norway)

FIN(Finland) P(Portugal)

D(Deutschland) E(Spain)

HU(Hungary)

ꢁ The number of stations automatically stored

by the DVD-VCR depends on the number

of stations that it has found.

Press the OK button.

A message is displayed, indicating that any

channels already preset on your DVD-VCR will

be deleted.

Note

ꢁ The time and date are set automatically

from the broadcast signal. If the signal is

weak or ghosting occurs, the time and date

may not be set automatically. In this case,

they should be set manually (refer to page

16).

Auto Setup

Your data will be lost

Press OK to continue

MENU to exit

ꢁ Once the auto scanning procedure has

finished, some stations may have been

stored more than once; select the stations

with the best reception and delete the ones

no longer required (refer to page 18).

RETURN

English - 17

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the … or † button to select the required

programme number.

Press the √ button to preset the station.

The MANUAL TUNING menu will be display.

Presetting the Stations

Manually

Press the œ or √ button to start scanning the

channels.

The frequency band is scanned and the first

station found is displayed.

You do not need to preset the stations manually if

you have already set them automatically.

❉ ❉ MANUAL TUNING ❉ ❉

Press the MENU button, then press the OK or

√ button.

- - -

MFT

DECODER

NAME

OFF

- - - -

Setup

Language

Clock

: English

√

SETUP

DVD

…† œ √

MEMORY : OK

RETURN

Install

User Set

VCR

PROG

FUNC

Auto Power Off : Off

Screen Messages : On

If necessary, press the … or † button to select

MFT, then press the œ or √ button to adjust the

picture.

RETURN

❉ ❉ MANUAL TUNING ❉ ❉

Press the … or † button to select Install, then

press the OK or √ button.

The Install menu is displayed.

021

MFT

DECODER

NAME

OFF

- - - -

Install

Auto Setup

√

SETUP

DVD

Manual Setup

TV System

…† œ √

MEMORY : OK

RETURN

VCR Output CH

:CH36

VCR

PROG

FUNC

Press the … or † button to select DECODER,

then press the œ or √ button to select decoder

ON or OFF.

RETURN

Press the … or † button to select Manual

Setup, then press the OK or √ button.

The TV STATION TABLE menu is displayed.

❉ ❉ MANUAL TUNING ❉ ❉

021

MFT

❉ ❉ TV STATION TABLE ❉ ❉

DECODER

NAME

OFF

- - - -

NAME

DEC

…† œ √

MEMORY : OK

RETURN

…†

√

SWAPPING : OK

RETURN

DELETE : CLEAR

18 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the … or † button to select NAME.

The station name is set automatically from the

broadcast signal.

Clearing a Preset

Station

❉ ❉ MANUAL TUNING ❉ ❉

021

MFT

If you have stored a TV station:

DECODER

NAME

OFF

- - - -

• That you do not require

• At the wrong programme position, you can cancel it.

…† œ √

MEMORY : OK

RETURN

Press the MENU button, then press the OK or

√ button.

•To change the programme’s name, press the

√ button. The first letter of the name flashes.

Press the … or † button to select Install, then

press the OK or √ button.

The Install menu is displayed.

To...

Then...

Select a character

in the name

Press the …, †button until the

required character is displayed

(letters, numbers or “-” character).

Install

Auto Setup

√

SETUP

DVD

Move to the next

previous or

Press the œ or √ button

respectively.

Manual Setup

TV System

character

VCR Output CH

:CH36

VCR

PROG

FUNC

If you...

Then...

Wish to store the

station displayed

•

Press OK to store the station.

RETURN

•

Press the … or † button until the

CH is selected.

Press the œ or √ button to go on

scanning the frequency band and

display the next station.

Do not wish to

store the station

displayed

Press the … or † button to Select Manual

Setup, then press the OK or √ button.

The TV STATION TABLE menu is displayed.

❉ ❉ TV STATION TABLE ❉ ❉

Repeat this procedure from step 4 onwards,

until all the required stations have been stored.

NAME

- - - -

DEC

OFF

021

Press the MENU button to exit the menu.

…†

√

SWAPPING : OK

RETURN

DELETE : CLEAR

Press the … or † button to select required

preset TV station.

Press the CLEAR button to delete.

Repeat the same procedure from step 4

onwards until all the required stations have

been cleared.

English - 19

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the … or † button to select required

preset TV station.

The selected station is displayed at the same

time on the television screen.

Changing the Preset

Station Table

Press the OK button to change the programme

number assigned to a station.

You can rearrange the station table and give different

programme numbers to the stations listed according

to your own preferences.

❉ ❉ TV STATION TABLE ❉ ❉

NAME

- - - -

DEC

OFF

021

Press the MENU button, then press the OK or

√ button.

Setup

…†

SWAPPING : OK

RETURN

Language

Clock

: English

√

SETUP

DVD

Install

User Set

VCR

PROG

FUNC

Press the … or † button to select required

position, then press the OK button to swap the

position.

For example, To move a TV station in

programme 1 to programme 3.

Auto Power Off : Off

Screen Messages : On

RETURN

❉ ❉ TV STATION TABLE ❉ ❉

Press the … or † button to select Install, then

press the OK or √ button.

The Install menu is displayed.

NAME

DEC

021

- - - -

OFF

Install

Auto Setup

√

SETUP

DVD

Manual Setup

TV System

…†

√

SWAPPING : OK

RETURN

DELETE : CLEAR

VCR Output CH

:CH36

VCR

PROG

FUNC

• Press the MENU button to exit the menu.

RETURN

Press the … or † button to Select Manual

Setup, then press the OK or √ button.

The TV STATION TABLE menu is displayed.

❉ ❉ TV STATION TABLE ❉ ❉

NAME

- - - -

DEC

OFF

021

…†

√

SWAPPING : OK

RETURN

DELETE : CLEAR

20 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the RF OUT

Sound Mode (B/G-D/K)

Setting the VCR Output

Channel

Your DVD-VCR output channel may need to be

changed if the pictures suffer from interference or if your

TV cannot find the pictures.

You can choose the sound mode (B/G or D/K)

according to the TV set connected to your VCR.

Press the MENU button, then press the OK or

√ button.

Press the MENU button, then press the OK or

√ button.

Press the … or † button to select Install, then

press the OK or √ button.

The Install menu is displayed.

Setup

√

SETUP

Language

Clock

: English

DVD

Install

User Set

Install

VCR

PROG

FUNC

Auto Power Off : Off

Screen Messages : On

√

SETUP

DVD

Auto Setup

Manual Setup

TV System

: G

VCR Output CH

: CH36

VCR

PROG

FUNC

RETURN

Press the … or † button to select Install, then

press the OK or √ button.

The Install menu is displayed.

RETURN

Press the … or † button to select VCR Output CH.

Install

Auto Setup

√

SETUP

DVD

Manual Setup

TV System

Install

: G

SETUP

DVD

Auto Setup

√

VCR Output CH

: CH36

VCR

PROG

FUNC

Manual Setup

TV System

: G

VCR Output CH

: CH36

VCR

PROG

FUNC

RETURN

Press the … or † button to select TV System,

then press the OK or √ button to select G or K.

Press the OK or œ / √ button to select the

required output channel (CH21~CH69).

Install

Auto Setup

√

SETUP

DVD

Manual Setup

TV System

➝ CH21 ➝ ..CH36 ➝ ..CH69

: G

VCR Output CH

: CH36

VCR

PROG

FUNC

• Press the MENU button to exit the menu.

Then tune your television again (see page 14).

RETURN

ꢁ You can select the required output channel

directly by using the number button.

Note

• Press the MENU button to exit the menu.

English - 21

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the Colour

Mode

VCR

Functions

Before recording or playing back a cassette, you can

select the required system standard.

Otherwise, the system automatically selects the

reception standard when you select AUTO.

• When playing back a cassette, the standard is

automatically selected by the DVD-VCR.

• When you playback an NTSC-recorded tape on this

DVD-VCR make a setting on the colour system

according to your TV. If your TV is a PAL system only

TV, set NTPB. If your TV is multi system TV (NTSC

4.43 compatible), set NT4.43 and you can record

NT4.43.

Press the MENU button, then press the OK or √

button.

Setup

Language

Clock

: English

√

SETUP

DVD

Install

User Set

VCR

PROG

FUNC

Auto Power Off : Off

Screen Messages : On

RETURN

Press the … or † button to select User Set,

then press the OK or √ button.

The User Set menu is displayed.

• Selecting the Colour Mode . . . . . . . . . . . . . 22

•NICAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

•Intelligent Picture Control . . . . . . . . . . . . . . 23

•Auto Power off . . . . . . . . . . . . . . . . . . . . . . 24

•Screen Messages . . . . . . . . . . . . . . . . . . . . . 24

•Selecting the Cassette Type . . . . . . . . . . . . . 25

•Repeat Play . . . . . . . . . . . . . . . . . . . . . . . . 25

•Selecting the Recording Speed . . . . . . . . . . 25

•Protecting a Recorded Cassette . . . . . . . . . . 26

•Recording a Programme Immediately . . . . . 26

•Recording a Programme with Automatic Stop . 27

•Recording from Another VCR or Camcorder . . . 27

•Using the Assemble Edit Function . . . . . . . . 28

•Using the Timer Programming Feature . . . . 29

•Checking a Preset Recording . . . . . . . . . . . . 31

•Cancelling a Preset Recording . . . . . . . . . . . 31

User Set

SETUP

DVD

Colour System

NICAM

: Auto

: On

√

IPC

: On

VCR

PROG

FUNC

RETURN

Press the OK or √ button to select required colour

system.

Auto ➝ PAL ➝ B/W

•Auto : When playing back a cassette, the

system standard is automatically selected

by the DVD-VCR.

•B/W : Black and White

22 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

NICAM

Intelligent Picture

Control

NICAM programmes are divided into 3 types. NICAM

Stereo, NICAM Mono and Bilingual (transmission in

another language).

This feature allows you to adjust the sharpness of the

image automatically, according to your own preferences.

NICAM programmes are always accompanied by a

standard mono sound broadcast and you can select the

desired sound. Please refer to page 33.

During playback press the MENU button, then

press the OK or √ button.

Press the MENU button, then press the OK or √

button.

Press the … or † button to select User Set, then

press the OK or √ button.

The User Set menu is displayed.

Setup

SETUP

DVD

Language

Clock

: English

√

Press the … or † button to select IPC (Intelligent

Picture Control), then press the OK or √ button to

select IPC option.

Install

User Set

VCR

PROG

FUNC

Auto Power Off : Off

Screen Messages : On

User Set

SETUP

DVD

Colour System

NICAM

: Auto

: On

√

RETURN

IPC

: On

VCR

PROG

FUNC

Press the … or † button to select User Set, then

Press the OK or √ button.

The User Set menu is displayed.

RETURN

User Set

SETUP

DVD

Colour System

NICAM

: Auto

: On

√

• You can select the modes simply by pressing

the IPC button.

IPC

: On

VCR

PROG

FUNC

To adjust the sharpness manually, press the

† button to turn the IPC mode OFF.

The sharpness of the picture is adjusted

manually.

RETURN

Press the œ or √ buttons until the picture is

displayed according to your preferences.

Press the … or † button to select NICAM, then

press the OK or √ button to select On or Off.

❉ ❉ PICTURE ❉ ❉

• On (for NICAM mode):

Normally set at this position

• Off (for MONO mode):

IPC : OFF

Only set at this position to record the standard

mono sound during a NICAM broadcast if the

stereo sound is distorted due to inferior

reception conditions.

SOFTEN

SHARPEN

❉

œ √

ON/OFF

†

English - 23

Download from Www.Somanuals.com. All Manuals Search And Download.

Auto Power off

Screen Messages

Your DVD-VCR displays most information on both the

DVD-VCR and the television.

This feature automatically turns off your DVD-VCR if no

signal is received and you do not press any button for

the selected time.

You can choose to display or hide this information on the

television screen (If you configure the Screen Message

to Off, the Fast Forward and Rewind messages will not

be displayed on the screen. However, the Search

message will not be displayed on the screen regardless

of the Screen Message configuration).

Press the MENU button, press the OK or √

button.

Setup

Press the MENU button, then press the OK or √

button.

SETUP

DVD

Language

Clock

: English

√

Install

User Set

VCR

PROG

FUNC

Setup

Auto Power Off : Off

Screen Messages : On

√

SETUP

DVD

Language

Clock

: English

Install

RETURN

User Set

VCR

PROG

FUNC

Auto Power Off : Off

Screen Messages : On

Press the … or † button to select Auto Power

Off.

RETURN

Setup

Press the … or † button to select Screen

Messages.

SETUP

DVD

Language

Clock

: English

√

Install

User Set

VCR

PROG

FUNC

Setup

Auto Power Off : Off

Screen Messages : On

√

SETUP

DVD

Language

Clock

: English

Install

RETURN

User Set

VCR

PROG

FUNC

Auto Power Off : Off

Screen Messages : On

Press the OK or √ button to select the preset

interval.

RETURN

➝ Off ➝ 1 Hour ➝ 2 Hour ➝ 3 Hour

Press the OK or √ button to select On or Off.

• Press the MENU button to exit the menu.

• On : Select to display on-screen information.

• Off : Select to hide on-screen information.

• Press the MENU button to exit the menu.

24 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the Cassette

Type

Repeat Play

If you wish to use the tape counter to display the time

remaining on a cassette, you must indicate the type of

cassette inserted.

You can set repeat play to repeat the tape continuously

from beginning to end.

Press the MENU button, then press the … or †

button to select VCR.

Press the MENU button, then press the … or †

button to select VCR.

VCR Setup

SETUP

DVD

Tape Select

Repeat Play

: E180

: Off

√

SETUP

DVD

Tape Select

Repeat Play

: E180

: Off

√

VCR

PROG

FUNC

VCR

PROG

FUNC

RETURN

Press the OK or √ button.

The Tape Select is selected.

Press the OK or √ button.

The Tape Select is selected.

VCR Setup

Tape Select

Repeat Play

: E180

: Off

√

SETUP

DVD

Tape Select

Repeat Play

: E180

: Off

√

SETUP

DVD

VCR

PROG

FUNC

VCR

PROG

FUNC

RETURN

Press the … or † button to select Repeat Play.

Press the OK or √ button to select On or Off.

Press the OK or √ button to select the correct

cassette length.

➝ E180 ➝ E240 ➝ E260 ➝ E300

VCR Setup

SETUP

DVD

Tape Select

Repeat Play

: E180

: Off

√

• Press the MENU button to exit the menu.

VCR

PROG

FUNC

RETURN

• On : Repeat play.

• Off : Do not wish to repeat play.

English - 25

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the

Recording Speed

Protecting a Recorded

Cassette

You can record a cassette at two different speeds:

Video cassettes have a safety tab to prevent accidental

erasure. When this tab has been removed, you cannot

record on the tape.

• SP (Standard Play)

• LP (Long Play)

In Long Play modes:

• Each cassette lasts twice as long

• The recording is of a slightly lower quality

If you wish to protect a cassette, break off the tab

using a small screwdriver.

Press the SPEED button to select SP or LP.

• The selected record speed will appear on the

front panel display.

To re-record over a protected cassette (safety tab

broken), cover the hole with adhesive tape.

Type

E180

E240

E260

E300

Recording Time (in SP)

180 mins. or 3 hours

240 mins. or 4 hours

260 mins. or 4 hours and 20 mins.

300 mins. or 5 hours

26 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording a Programme

Immediately

Recording a Programme

with Automatic Stop

Before recording a programme, you must have preset

the corresponding station (unless you are recording via

an external video source). If you have not done so, refer

to pages 15~19.

This function enables you to record up to nine hours

(LP) of programmes.

Your DVD-VCR stops automatically after the requested

length of time.

Switch on the television.

Insert the cassette on which the programme is to be

recorded, with the window visible and the safety tab

intact or the opening covered with adhesive tape.

The DVD-VCR is switched on automatically.

Insert the video tape in to the VCR deck, with the

window visible and the safety tab intact or the

opening covered with adhesive tape. The DVD-

VCR is switched on automatically.

Select the station to be recorded by pressing the

PROG or

button or select the source (AV1,

AV2, or AUX) by pressing the INPUT SEL. button

for a satellite tuner or external video source.

The station number is displayed and the

programme can be seen on the television.

Select the station by pressing the PROG or

button or select the source (AV1, AV2, or AUX) by

pressing the INPUT SEL. button for a satellite

tuner or external video source. The station number

is displayed and the programme can be seen on

the television.

Select the recording speed by pressing the SPEED

button (refer to page 26).

Hold down the REC ( ) button for a while to start

●

recording.

The record indicator appears on the television

screen and DVD-VCR display. An index is

recorded on the tape (refer to page 34).

Select the recording speed by pressing the

SPEED button as many times as required (refer to

page 26).

Press the REC ( ) button several times to

●

increase the recording time in:

• 30-minute intervals up to four hours

• 1-hour intervals up to nine hours

Hold down the REC ( ) button for a while to start

●

recording.

The record indicator appears on the television and

DVD-VCR display. An index is recorded on the

tape (refer to page 34).

The length is displayed on the television displays.

The selected programme is recorded for the length

of time requested. At the end of that time, the

DVD-VCR stops recording automatically and

power off.

To stop recording, press the button once.

■

• If your DVD-VCR ejects the cassette when you

start recording, check to make sure that the

cassette’s safety tab is intact or that the opening

(created by a broken safety tab) is covered with

adhesive tape.

LENGTH 2:30

SET LENGTH :

• If you reach the end of the tape while recording,

the cassette rewinds automatically.

PRESS REC

●

If you wish to cancel the recording before the end,

press the ON/STANDBY button.

• If the end of the tape is reached while recording,

the recording stops and power off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Recording from Another

VCR or Camcorder

Using the Assemble

Edit Function

You can copy a cassette to your DVD-VCR from another

video source, such as another VCR or a Camcorder etc.

This function allows you to start a new recording at a

specific position on the cassette while

maintaining a very smooth scene change.

• It is an infringement of copyright laws to copy

prerecorded cassettes or to re-record them in any

form without the permission of the owners of the

corresponding copyright.

Insert the cassette to be edited in your DVD-VCR.

Connect the output jack of your External devices to

the SCART input connector or AUX on the front or

rear of the DVD-VCR.

Press the √ll button to start playback.

When you reach the position from which you wish

to start the new recording, press the √ll button.

Insert a blank cassette in your DVD-VCR.

Press the F.ADV/STEP button as often as

necessary to advance frame by frame, until the

exact recording position is located.

Insert the pre-recorded cassette in the other video

source (VCR or Camcorder etc).

Press the INPUT SEL. button to select the

appropriate input on your DVD-VCR:

While the DVD-VCR is in still mode, hold down the

REC ( ) button for a while to activate the

●

assemble edit function.

• AV1, AV2 for the SCART input

• AUX for the RCA input

Select the source from which you wish to record

by pressing:

Start playing back the cassette to be copied.

• The PROG

channels

button for television

• The INPUT SEL. button for the AV1, AV2 or

AUX input source.

Hold down the REC ( ) button for a while to start

●

recording on your DVD-VCR.

Press the √ll button to start recording.

When you have finished recording, press the

button on both VCR and DVD-VCR.

■

button.

■

• If you wish to view the cassette being copied, your

DVD-VCR must be connected as usual to the

television (refer to page 9 for further details).

28 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the OK or √ button to select PR, then

press the … or † button to select the required

station.

Using the Timer

Programming Feature

PR Day

Start

Stop

Speed

V/P

The Timer Programming feature allows you to preset the

DVD-VCR to record a programme up to one month

before that programme is to be broadcast. Up to six

programmes can be preset.

• Before presetting a recording, check that the date and

time are correct.

RETURN

• You must check that the cassette tape is loaded.

• Press the INPUT SEL. button to select an input

source (AV1, AV2, or AUX) other than the tuner.

Press the MENU button, then press the … or †

button to select PROG, then press OK or √ button,

The Timer Method menu is displayed.

Press the √ button to select Day, then press the …

or † button to select the required day.

Timer Method

SETUP

PR Day

Start

Stop

Speed

V/P

DVD

If you want to set the

timer program, press

the OK key.

01 SA 01

VCR

PROG

FUNC

RETURN

Press the OK or √ button again.

The timer programming menu is displayed.

•

DLY

W-SU

W-MO

: Daily

: Weekly Sunday

Weekly Monday

PR Day

Start

Stop

Speed

V/P

W-SA

SA 01

Weekly Saturday

: Saturday 01

•

Press the √ button to select Start (recording start

time).

PR Day

Start

Stop

Speed

V/P

RETURN

01 SA 01 13 : 25

• It can be displayed simply by pressing the TIMER

button on the remote control.

RETURN

• Press the œ or √ button to select the hour or

minute.

• Press the … or † button to set the stop time.

English - 29

Download from Www.Somanuals.com. All Manuals Search And Download.

• VPS (Video Programme System) /

Press the √ button to select Stop (recording stop

time).

PDC (Programme Delivery Control System)

Depending on TV stations, VPS/PDC signals are

transmitted with TV programmes. The VCR can

control the timer recording start and end times by the

VPS/PDC signals to assure the recording of a whole

programme, covering any changes in the published

broadcast time, that is, time shift, extension or

interruption of the programme. lf the TV programme

is interrupted, during the VPS/PDC controlled timer

recording,the recording will be automatically

interrupted and resumed when the programme

continues.

PR Day

Start

Stop

Speed

V/P

01 SA 01 13 : 25 19 : 57

RETURN

Important: The VPS/PDC function only works when

the VPS/PDC signal is transmitted with the TV

programme to be recorded. If the broadcasting

station does not transmit the VPS/PDC signal, the

timer recording will be done in the normal mode

even if it was programmed in the VPS/PDC mode.

•Press the œ or √ button to select the hour or

minute.

•Press the … or † button to set the stop time.

Press the √ button to select Speed (recording

speed).

When you have finished, press the MENU button

to exit the menu.

PR Day

Start

Stop

Speed

V/P

01 SA 01 13 :

25 19 :

Press the ON/STANDBY button to activate the

timer.

RETURN

•Press the … or † button to select the required

recording speed.

• Auto ➝ SP (Standard Play) ➝ LP (Long Play)

• Auto Tape Speed Select

The DVD-VCR’s “Auto Tape Speed Select”

function compares the duration of the timer

recording to the actual recording time remaining

on the tape loaded. If there is insufficient tape

to complete a timer recording in Auto mode,

the DVD-VCR automatically switches to LP

mode to record the whole programme.

Before starting recording, the DVD-VCR compares

the timer duration with the remaining time on the

cassette.

•Press the ON/STANDBY button to stop Timer

programming recording.

Press the √ button to select V/P (recording

VPS/PDC).

PR Day

Start

Stop

Speed

V/P

Off

01 SA 01 13 : 25 19 : 57

RETURN

• Press the … or † button to select On or Off.

30 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Cancelling a Preset

Recording

Checking a Preset

Recording

You can cancel any programmes that are:

You can check your preset recordings:

• Incorrect

• No longer required

• When you have finished presetting the DVD-VCR

• If you have forgotten which programmes will be

recorded

Press the MENU button, then press the … or †

button to select PROG, then press the OK or √

button.

The Timer Method menu is displayed.

Press the MENU button, then press the … or †

button to select PROG, then press the OK or √

button.

The Timer Method menu is displayed.

Timer Method

SETUP

DVD

If you want to set the

timer program, press

the OK key.

Timer Method

VCR

PROG

FUNC

SETUP

DVD

If you want to set the

timer program, press

the OK key.

VCR

PROG

FUNC

RETURN

The list of preset recodings is displayed with the

corresponding information.

RETURN

PR Day

Start

Stop

Speed

V/P

Off

01 SA 01 13 :

:25 19 :

The list of preset recodings is displayed with the

corresponding information.

-- -- -- --

-- --

-- -- --

PR Day

Start

Stop

: 57

Speed

V/P

Off

01 SA 01 13 :

25 19

-- -- -- --

-- --

-- -- --

RETURN

• It can be displayed simply by pressing the

TIMER button on the remote control.

Press the … or † button to select the programme

to be cancelled, then press the CLEAR button.

RETURN

• It can be displayed simply by pressing the

TIMER button on the remote control.

PR Day

Start

Stop

Speed

V/P

-- -- -- --

-- --

-- -- --

To change any values, select the required

programme by pressing the … or † button, then

change any values as required. For more details

refer to page 29. (Step 2 to 9)

• Press the MENU button to exit the menu.

RETURN

•All the recording information is deleted and the

broadcast will not be recorded.

• Press the MENU button to exit the menu.

English - 31

Download from Www.Somanuals.com. All Manuals Search And Download.

Playing a Cassette

Playing

Back

This function allows you to play back any pre-recorded

cassette.

Switch on both the television and your DVD-VCR.

Insert the video cassette. If the safety tab on the

cassette is intact, press the √ll (play/pause)

button. Otherwise, the cassette is played

automatically.

• When a cassette is loaded, the tape position

is optimized automatically to reduce

disturbance (Digital Auto Tracking).

When playing a cassette, if the end of the

tape is reached, the cassette is rewound

automatically. NTSC tapes can be played back

but cannot be recorded with this DVD-VCR.

Press the (stop) button to stop the playback.

■

Press the

(eject) button to eject the playback.

Adjusting Picture

Alignment Manually

This feature allows you to adjust the alignment manually

to obtain the best possible picture.

When noise bars or streaks appear during playback,

• Playing a Cassette . . . . . . . . . . . . . . . . . . . . 32

•Adjusting Picture Alignment Manually . . . . . 32

•Selecting the Audio Output Mode . . . . . . . . 33

•Playing a Cassette in Slow Motion . . . . . . . . 33

•Playing a Sequence Frame by Frame . . . . . . 33

•Playing a Sequence at Variable Speeds . . . . 33

•Searching for a Specific Sequence . . . . . . . . 34

•Using the Tape Counter . . . . . . . . . . . . . . . 36

adjust alignment manually by pressing the TRK

button until the picture is clear and stable.

…

†

◆ The tracking bar appears.

◆ The image is adjusted.

32 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the Audio

Output Mode

Playing a Sequence

Frame by Frame

You can select the mode in which the sound is

reproduced on the loudspeakers and AV outputs.

The following options are available.

You can

• Stop the cassette at a given frame (image)

• Advance one frame at a time

No sound is heard when playing back frame by frame.

Press the AUDIO button on the remote control until the

required option is displayed.

Option

Description

Press the :

• √ll button to start playing the cassette.

• √ll button again to make still mode.

• F.ADV button to advance frame by frame.

• √ll button to return to normal playback.

• Vertical stability: When playing back frame by

frame, interference may be seen on the screen.

Used to listen to the sound on the left Hi-Fi channel.

Used to listen to the sound on the right Hi-Fi channel.

MIX

Used to listen to the mixed sound of the Hi-Fi and

normal channels.

MONO

L R

Used to listen to the sound on the normal mono

channel.

Used to listen to Hi-Fi stereo sound on the left

and right channels

Press the TRK

effect.

…

†

button to minimize this

•

When playing back tapes recorded in Hi-Fi, the

sound switches to Hi-Fi after five seconds of Mono.

To select the sound mode, simply press the AUDIO button on

the remote control until the required option is displayed.

➝

R ➝ MIX

➝

MONO

➝

Playing a Sequence

at Variable Speeds

L R

Playing a Cassette in

Slow Motion

You can vary the playback speed using the Shuttle

function (up to nine times the normal speed).

Example: You wish to analyse a sportsperson’s

technique, movement by movement.

You can play a cassette in slow motion.

• No sound is heard when playing a sequence at

variable speeds.

• No sound is heard when playing back a cassette

in slow motion.

Press the :

• √ll button to start playing the cassette.

• √ll button again to make still mode.

• √√ button to start slow mode.

• œœ or √√ button as many times as required

to decrease or increase the speed respectively.

• √ll button twice to return to the normal speed.

• The slow motion feature does not support running

video backwards.

• SHUTTLE (<<) button to play the cassette

backwards.

• SHUTTLE (>>) button to play the cassette

forwards.

Each time you press the SHUTTLE button, the

speed is changed as shown in the following

illustration.

When playing back in slow motion, picture

interference may occur.

Press the TRK

effect.

• When you have been using the Slow Motion

function for more than about two minutes, the

DVD-VCR will automatically play to protect the:

…

†

button to minimize this

REVERSE REVERSE REVERSE

SLOW

MOTION MOTION

X1/10 X1/5

SLOW

PLAY PLAY PLAY

STILL

PLAY

- Cassette

- Video heads

English - 33

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the … or † button to select VCR Function

then press the OK or √ button.

The VCR Function menu is displayed with the Go

To [0:00:00] selected.

Searching for a

Specific Sequence

VCR Function

SETUP

DVD

Go To [0:00:00]

End Search

Intro Scan

Each time you record a cassette on this DVD-VCR,

an “index” is automatically marked on the tape when

recording starts.

The Search function allows you to fast-forward or rewind

to a specific index and start playback from that point.

Depending on the direction selected, the indexes are

numbered as follows:

VCR

PROG

FUNC

RETURN

• It can be displayed simply by pressing the

SEARCH button.

Seq.

Seq. being

played

Seq.

etc.

Press the OK or √ button again.

• This DVD-VCR uses a standard indexing system

(VISS). As a result, it will recognize any indexes

marked by other VCRs using the same system

and vice versa.

End Search

❚

Use this feature when you want to search for a blank

position to record a program on a cassette.

The VCR will fast forward, searching for a blank position,

and then automatically stop at that position.

If the VCR reaches the end of the tape during end

search, the tape will be ejected.

Go To [0:00:00] Stop

❚

Use this feature when you want to search for the 0:00:00

counter position on a cassette.

Press the CLEAR button at the point on the tape where

you want to set the counter to 0:00:00.

Press the SEARCH button.

The VCR Function menu is displayed.

Press the … or † button to select End Search.

The VCR will rewind or fast forward, searching for the

0:00:00 counter position, and then automatically stop at

that position.

VCR Function

Press the MENU button, then press the … or †

button to select FUNC.

Press the OK or √ button.

The Function menu is displayed.

SETUP

DVD

Go To [0:00:00]

End Search

Intro Scan

VCR

PROG

FUNC

Function

DVD Function

VCR Function

√

SETUP

DVD

RETURN

VCR

PROG

FUNC

Press the OK or √ button.

RETURN

34 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Intro Scan

Index Skip Search

❚

This feature will enable you to fast forward/rewind to

a specific point on a tape: e.g. if you have recorded 3

different programmes on a tape and you have rewound

the tape to the beginning, by using this feature you can

go directly to the start of programme 2 simply by

pressing the SEARCH button.

Press the SEARCH button.

The VCR Function menu is displayed.

Press the … or † button to select Intro Scan.

VCR Function

SETUP

DVD

Go To [0:00:00]

End Search

Intro Scan

Press the SEARCH button.

The VCR Function menu is displayed.

Press the … or † button to select Intro Scan.

VCR

PROG

FUNC

VCR Function

SETUP

DVD

Go To [0:00:00]

End Search

Intro Scan

RETURN

VCR

PROG

FUNC

Press the OK or √ button.

RETURN

Press the œœ or √√ button depending on the

direction where your desired programme is located.

Press the OK or √ button.

Press the œœ or √√ button twice more.

INTRO SCAN: œœ √√

These Index searches can be made forwards

(press the √√ button) or backwards (press the œœ

button).

●

(œœ -20

+20 √√)

This will take you directly to the start of the desired

programme is located.

When an Index mark is found the DVD-VCR will

playback the tape for 5 seconds, after which it will

continue searching for the next Index mark.

INDEX SEARCH : œœ -06

INTRO SCAN : œœ

To cancel an Index search simply press the √ll or

button.

■

If you want to watch the tape from a particular

Index, press the √ll button twice.

English - 35

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Tape Counter

The tape counter:

• Indicates the elapsed time in the play and record

modes (hours, minutes and seconds)

• Is reset when a cassette is inserted in the DVD-VCR

• Allows you to find the beginning of a sequence easily

• If the remaining time is to be calculated correctly, you

must indicate the type of cassette being used.

Insert a cassette in your DVD-VCR.

To set the tape counter to zero at the beginning of

a sequence:

0:00:00

• Press the DISPLAY button twice to display the

counter

• Press the CLEAR button when you want to set

the tape counter to zero

When you are ready,

•Start playback or Recording.

• Press the button.

■

• To fast-froward or rewind to the sequence at

which the counter was set to zero, press the

œœ or √√ button.

• Some DVD-VCR information, such as the

counter, can be displayed on the television

screen (unless you have deactivated the

Screen Messages mode; refer to page 24).

Press the DISPLAY button:

• Once to display the current function, programme

number, recording speed, date, time and counter

• Twice to display the counter only

• Three times to display the time remaining on the

cassette

• Four times to clear the display

36 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting Up the

Language Features

If you set disc menu, audio and subtitle language in

advance, it will come up automatically every time you

watch a movie.

DVD

Functions

Using the Disc Menu Language

❚

Press the MENU button in the stop mode.

Press the … or † button to select DVD, then press

the OK or √ button.

DVD Setup

SETUP

DVD

Language Setup

Audio Setup

√

Display Setup

VCR

PROG

FUNC

Parental Setup :

DivX(R) Registration

RETURN

Press the OK or √ button again.

Press the … or † button to select Disc Menu,

then press the OK or √ button.

• Setting Up the Language Features . . . . . . . . 37

• Setting Up the Audio Options . . . . . . . . . . . 39

• Setting Up the Display Options . . . . . . . . . . 40

• Setting Up the Parental Control . . . . . . . . . 41

• DivX(R) Registration . . . . . . . . . . . . . . . . . . 43

• Setting up the DVD function . . . . . . . . . . . 43

• Special Playback Features . . . . . . . . . . . . . . 44

• Using the Display Function . . . . . . . . . . . . . 45

• Adjusting the Aspect Ratio (EZ View) . . . . . 46

• Selecting the Subtitle Language . . . . . . . . . . 47

• Selecting the Audio Language . . . . . . . . . . . 47

• Changing the Camera Angle . . . . . . . . . . . . 48

• Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

• Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

• Repeat Chapter/Title . . . . . . . . . . . . . . . . . 49

• A to B Repeat . . . . . . . . . . . . . . . . . . . . . . . 50

• MP3 Play . . . . . . . . . . . . . . . . . . . . . . . . . . 51

• Program & Random Play (CD/MP3) . . . . . . . . . 52

• Picture CD Playback . . . . . . . . . . . . . . . . . . 53

• DivX/MPEG4 Playback . . . . . . . . . . . . . . . . 55

• DivX/MPEG4 Special Playback Features . . . 55

Language Setup

Disc Menu

Audio

: English

: Automatic

√

Subtitle

RETURN

Press the … or † button to select the required

language.

Disc Menu Language

√ English

Français

Deutsch

Español

Italiano

Disc Menu

Nederlands

Others

RETURN

•

Select Others if the language you want is not listed.

Press the OK button.

English - 37

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Audio Language

Using the Subtitle Language

❚

Press the MENU button in the stop mode.

Press the … or † button to select DVD, then press

the OK or √ button.

Press the MENU button in the stop mode.

Press the … or † button to select DVD, then press

the OK or √ button.

DVD Setup

SETUP

DVD

Language Setup

Audio Setup

√

SETUP

DVD

Language Setup

Audio Setup

√

Display Setup

VCR

PROG

FUNC

Parental Setup :

DivX(R) Registration

VCR

PROG

FUNC

Parental Setup :

DivX(R) Registration

RETURN

Press the OK or √ button again.

Press the … or † button to select Subtitle, then

press the OK or √ button.

Press the OK or √ button again.

Press the … or † button to select Audio, then

press the OK or √ button.

Language Setup

Disc Menu

Audio

: English

: Automatic

√

Disc Menu

Audio

: English

: Automatic

√

Subtitle

RETURN

Press the … or † button to select the required

language.

Press the … or † button to select the required

language.

Subtitle Language

Audio Language

√ Automatic

English

Subtitle

√ English

Français

Deutsch

Español

Italiano

Français

Audio

Deutsch

Español

Italiano

Nederlands

Others

Nederlands

Original

Others

RETURN

•Select Automatic if you want the subtitle language

to be the same as the language selected as the

audio language.

•Select Original if you want the default soundtrack

language to be the original language the disc is

recorded in.

•Select Others if the language you want is not listed.

•Select Others if the language you want is not

listed.

Press the OK button.

ꢀ Some discs may not contain the language you

select as your initial language; in that case the

disc will use its original language setting.

Note

38 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Dolby Digital Out

❚

Setting Up the Audio

Options

• PCM : Converts to PCM (2CH) audio.

Select PCM when using the Analog Audio

Outputs.

• Bitstream : Converts to Dolby Digital Bitstream (5.1CH).

Select Bitstream when using the Digital

Audio Output.

Press the MENU button in the stop mode.

Press the … or † button to select DVD, then press

the OK or √ button.

Be sure to select the correct Digital Output or no

audio will be heard.

Note

DVD Setup

MPEG-2 Digital Out

SETUP

❚

Language Setup

Audio Setup

√

DVD

• PCM : Converts to PCM (2CH) audio.

Select PCM when using the Analog Audio

Outputs.

Display Setup

VCR

PROG

FUNC

Parental Setup :

DivX(R) Registration

• Bitstream : Converts to MPEG-2 Digital Bitstream

(5.1CH or 7.1CH). Select Bitstream when

using the Digital Audio Output.

RETURN

Press the … or † button to select Audio Setup,

then press the OK or √ button.

DTS

❚

• Off : Doesn’t output digital signal.

DVD Setup

• On : Outputs DTS Bitstream via digital output only.

Select DTS when connecting to a DTS Decoder.

SETUP

DVD

Language Setup

Audio Setup

√

Display Setup

VCR

PROG

FUNC

Parental Setup :

DivX(R) Registration

Dynamic Compression

❚

• On : To select dynamic compression.

• Off : To select the standard range.

RETURN

PCM Down Sampling

❚

The Audio Setup menu is displayed.

• On : Select this when the amplifier connected to the

player is not 96KHz compatible. In this case, the

96KHz signals will be down converted to 48KHZ.

Audio Setup

Dolby Digital Out

MPEG-2 Digital Out

DTS

: PCM

: Off

√

• Off : Select this when the amplifier connected to the

player is 96KHz compatible. In this case, all

signals will be output without any changes.

Dynamic Compression

PCM Down Sampling

: On

ꢀ How to make the DVD menu disappear or

RETURN

return to menu screen during set up; Press

Note

RETURN or œ button.

ꢀ Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

ꢀ “DTS” and “DTS Digital Out” are trademarks of

Digital Theater Systems, Inc.

Press the … or † button to select the required item.

Press the OK or √ button to select the required

option.

English - 39

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Aspect

❚

Setting Up the Display

Options

Depending on the type of television you have, you

may want to adjust the screen setting (aspect ratio).

• 4:3 Letter Box :

Select when you want to see the total 16:9 ratio

screen DVD supplies, even though you have a

TV with a 4:3 ratio screen. Black bars will appear

at the top and bottom of the screen.

• 4:3 Pan Scan :

Press the MENU button in the stop mode.

Press the … or † button to select DVD, then press

the OK or √ button.

Select this for conventional size TVs when you

want to see the central portion of the 16:9 screen.

(Extreme left and right side of movie picture will

be cut off.)

DVD Setup

SETUP

DVD

Language Setup

Audio Setup

√

• 16:9 Wide :

You can view the full 16:9 picture on your

widescreen TV.

Display Setup

VCR

PROG

FUNC

Parental Setup :

DivX(R) Registration

Black Level

❚

RETURN

Adjusts the brightness of the screen. (On/Off)

- Black level function works on NTSC system only.

Press the … or † button to select Display Setup,

then press the OK or √ button.

NTSC Disc Output

“NTSC” if the screen only has one NTSC-video

entrance. If this is not the case, you can choose to

leave “PAL60” as is.

Display Setup

TV Aspect

: 4:3 L-Box

: Off

√

Black Level

NTSC Disc Output

DVD Out

: PAL60

: RGB

DVD Out

❚

• RGB : Sends RGB signal from the SCART

socket (AV1).

RETURN

• S-Video : Sends S-VIDEO signal from the

S-Video jack.

Press the … or † button to select TV Aspect,

press the OK or √ button.

TV Aspect

√ 4:3 Letter Box

4:3 Pan Scan

16:9 Wide

RETURN

Press the … or † button to select the required

item, then press the OK button to select the

required option.

40 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the OK or √ button again if you want to use

a password.

The Enter Password menu is displayed.

Enter your password by pressing the number

buttons.

Setting Up the Parental

Control

Create Password

Enter Passaword

The Parental Control function works in conjunction with

DVDs that have been assigned a rating - which helps

you control the types of DVDs that your family watches.

There are up to 8 rating levels on a disc.

–

Press the MENU button in the stop mode.

RETURN

Press the … or † button to select DVD, then press

the OK or √ button.

Press the … or † button to select Parental Setup.

The Re-enter Password menu is displayed to

confirm the password.

DVD Setup

Create Password

SETUP

DVD

Language Setup

Audio Setup

√

Display Setup

Re-enter Passaword

VCR

PROG

FUNC

Parental Setup :

DivX(R) Registration

–

RETURN

Press the OK or √ button.

The Use Password menu is displayed.

Enter your password again.

The Use Password is set to Yes and the Parental

Setup menu is displayed.

The DVD-VCR is locked (

Parental Setup

Use Password

: No

√

Parental Setup

Use Password

Rating Level

: Yes

: 1

√

Change Password

RETURN

English - 41

Download from Www.Somanuals.com. All Manuals Search And Download.

Setting up the Rating Level

Changing the Password

❚

Press the … or † button to select Rating Level,

then press the OK or √ button.

Press the … or † button to select Change

password, then press the OK or √ button.

Parental Setup

Use Password

Rating Level

: Yes

: 1

√

Use Password

Rating Level

: Yes

: 1

√

Change Password

RETURN

Press the OK or √ button.

The Enter New Password is displayed.

Enter your password by pressing the number

buttons.

Rating Level

Level 8 Adult

Level 7

Level 6

Level 5

Change Password

Level 4

Level 3

Enter New Passaword

Level 2

Level 1 Kids Safe

–

RETURN

Press the … or † button to select the required

level (e.g. Level 6).

Press the OK or √ button.

The Re-enter Password is displayed to confirm

the password.

•Discs that contain Level 7 will now not play.

Rating Level

Change Password

Re-enter Password

Level 8 Adult

Level 7

Level 6

Level 5

–

Level 4

Level 3

Level 2

Level 1 Kids Safe

RETURN

Enter your password again.

•How to make the DVD menu disappear or return

to menu screen during set up;

Press the RETURN or œ button.

•If you have forgotten your password, refer to

Forgot Password in the Troubleshooting Guide

(See page 59).

Parental Setup

Use Password

Rating Level

: Yes

: 6

√

Change Password

RETURN

42 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

DivX, DivX Certified, and

associated logos are

trademarks of

DivX(R) Registration

DivXNetworks, Inc and are

used under license.

Please use your registration code to register this player

with the DivX(R) Video On Demand service. This will

allow you to rent and purchase videos using the DivX(R)

Video On Demand format. To learn more go to

www.divx.com/vod.

Setting up the DVD

function

Press the MENU button in the stop mode.

Press the … or † button to select DVD.

The DVD Setup menu is displayed.

During playback, press the MENU button.

Press the corresponding … , † buttons to select

FUNC, then press the OK or √ button.

DVD Setup

SETUP

DVD

Language Setup

Audio Setup

√

Display Setup

Press the … or † button to select DVD Function,

then press the OK or √ button.

VCR

PROG

FUNC

Parental Setup :

DivX(R) Registration

Press the … or † button to select the desired

function, then press the OK or √ button.

RETURN

DVD Function

SETUP Title Menu

Disc Menu

Press the OK or √ button.

Press the … or † button to select DivX(R)

Registration.

DVD

Info

Zoom

VCR

Bookmark

Repeat

PROG

FUNC

DVD Setup

Ez View

SETUP

DVD

Language Setup

Audio Setup

√

RETURN

Display Setup

VCR

PROG

FUNC

Parental Setup :

DivX(R) Registration

• Title menu

Two or more titles are recorded on some discs. If the

title menu is recorded on the disc, you can select the

desired title.

RETURN

• Disc menu

You can display the menu included on many DVD

Video discs. Use the … , † or œ , √ buttons to select

the item you want to view, then press OK to execute

the item.

Press the OK or √ button.

A message is displayed.

DivX(R) Registration

Your Registration code is: ZD7A8VD5 .

• DISPLAY

Similar to Display Function, see page 45.

Please use this code to register this

player with the DivX(R) Video On Demand

service. This will allow you to rent and

purchase videos using the DivX(R) Video

On Demand format. To learn more go to

www.divx.com/vod.

• Zoom

See page 48.

• Book mark : See page 49.

• Repeat : See page 49.

• EZ View : See page 46.

RETURN

English - 43

Download from Www.Somanuals.com. All Manuals Search And Download.

Slow Motion

During playback, press the √ll button to still the image.

Then press the √√ button to play in slow motion at

variable speeds.

❚

Special Playback

Features

• Each press increases the slow motion speed playback

to 1/8, 1/4 or 1/2 normal speed.

• Audio is muted during slow motion playback.

During DVD/CD playback you can select from the

following special playback options.

To resume normal playback, press the √ll button.

ꢀ Slow motion operates only in the forward

direction. Slow motion is not available for CD.

Note

Still

❚

Press the √ll button during playback.

• The picture will still and the audio will mute.

• To resume playback, press the √ll button.

• If the player is left in still mode for 5 minutes, it will stop

automatically.

Stop/Resume

❚

• Press the button once to stop playback. To resume

■

the DVD/CD from the point where the disc stopped,

press the √ll button.

• Press the button twice to completely stop playback.

■

The next time you press the √ll button, the disc will

start over from the beginning.

Frame Advance (Step)

While in playback mode, press the F.ADV/STEP button

on the remote control to advance one frame at a time.

• Audio is muted during frame advance mode.

❚

• Press the √ll button to resume normal playback.

ꢀ Frame Advance operates only in the forward

direction.

Note

Skip Forward/Back

❚

While a DVD or VCD/CD disc is in play mode, press the

lœœ or √√l button to jump forward and backward

through disc chapters/tracks.

• Skip Forward (√√l) will jump to the next chapter/track.

• Skip Back (lœœ) will jump to the beginning of the

current chapter/track.

• Press the lœœ button again in quick succession to

jump to the beginning of the previous chapter/track.

Search Forward/Back

While a disc is in play mode, press and hold the œœ

or √√ button to visually search forward/backward at

2X - 4X - 8X - 16X - 32X - 128X speed.

❚

Press the √ll button to resume normal speed.

• CD : 2X - 4X - 8X - 16X - 32X

44 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

To make the screen disappear, press the DISPLAY

button again.

Using the Display

Function

To access the desired title when there is

more than one in the disc.

For example, if there is more than one

movie on a DVD, each movie will be

identified. A DVD may contain several

different titles. For example, if a disc contains

four different movies, each might be

considered a title.

To view the current Title, Chapter/Track, and counter

position, press the DISPLAY button during DVD

playback. The Display screen can also be used to

quickly choose a title, chapter/track, or playing time.

View the Display

During DVD/VCD/CD playback, press the

Most of DVD discs are recorded in

chapters so that you can quickly find a

specific passage.

Each Title on a DVD is usually divided into

chapters (similar to tracks on VCD and

audio CD).

DISPLAY button.

•To make the screen disappear, press the DISPLAY

button again.

DVD

Allows playback of the film from a desired

time.

Refers to the language of the film

soundtrack. In the example, the

soundtrack is played in English 5.1CH.

A DVD disc can have up to eight different

soundtracks.

ENG 5.1CH

ENG

MOVE

Refers to the subtitle languages available

in the disc.

VCD

You will be able to choose the subtitles

language or, if you prefer, turn them off

from the screen.

A DVD disc can have up to 32 different

subtitles.

ꢀ

When in VCD 2.0 MODE (Menu On), this

function does not work. Use the DISC MENU

button in the VCD 2.0 mode to select Menu

On or Off.

MOVE

Note

Use the … , † buttons to select the desired item.

Use the œ , √ buttons to make the desired setup.

• You may use the number buttons of the remote

control to directly access a title, chapter or to start

the playback from the desired time.

English - 45

Download from Www.Somanuals.com. All Manuals Search And Download.

If you are using a 4:3 TV

❚

Adjusting the Aspect

Ratio (EZ View)

For 16:9 aspect ratio discs

- 4:3 Letter Box

Displays the content of the DVD title in 16:9

aspect ratio. The black bars will appear at the

top and bottom of the screen.

This function may behave differently depending on the

type of disc.

- 4:3 Pan Scan

The left and right portions of the screen are cut

off and the central portion of the 16:9 screen is

displayed.

- Screen Fit

To play back using aspect ratio (DVD)

❚

The top and bottom portions of the screen are

cut off and a full screen appears.

Press the EZ VIEW button.

•The screen size changes when the button is

pressed repeatedly.

•The screen zoom mode operates differently

depending on the screen setting in the initial

DVD menu.

•To ensure correct operation of the EZ VIEW

button, you should set the correct aspect ratio

in the initial setup.

The picture will look vertically stretched.

- Zoom Fit

When a 4:3 DVD is viewed on a 16:9 TV, black

bars will appear at the left and right of the

screen in order to prevent the picture from

looking horizontally stretched.

For 4:3 aspect ratio discs

- Normal Screen

If you are using a 16:9 TV

❚

Displays the content of the DVD title in 4:3

aspect ratio.

For 16:9 aspect ratio discs

- Screen Fit

- Wide Screen

Displays the content of the DVD title in 16:9

aspect ratio.

The top and bottom portions of the screen are

cut off and the full screen appears.

The picture will look vertically stretched.

- Screen Fit

The top and bottom portions of the screen are

cut off. When playing a 2.35:1 aspect ratio disc,

the black bars at the top and bottom of the

screen will disappear. The picture will look

vertically stretched. (Depending on a type of

disc, the black bars may not disappear

completely.)

- Zoom Fit

The top, bottom, left and right portions of the

screen are cut off and the central portion of the

screen is enlarged.

- Zoom Fit

The top, bottom, left and right of the screen are

cut off and the central portion of the screen is

enlarged.

For 4:3 aspect ratio discs

- Normal Screen

Displays the content of the DVD title in 16:9

aspect ratio. The picture will look horizontally

stretched.

- Screen Fit

The top and bottom portions of the screen are

cut off and the full screen appears.

The picture will look vertically stretched.

- Zoom Fit

The top, bottom, left and right portions of the

screen are cut off and the central portion of the

screen is enlarged.

46 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting the Audio

Language

Selecting the Subtitle

Language

Some DVDs provide subtitles in one or more languages.

You can use the SUBTITLE button to quickly view and

change settings.

Multiple language/audio setup options, such as Dolby

Digital 5.1, Dolby Pro Logic or LPCM 2 Channel audio

are available on some DVDs. You can use the AUDIO

button to quickly view and select the options available

on a disc.

During playback, press the SUBTITLE button.

During playback, press the AUDIO button.

DVD

ENG

Off

Press the œ or √ button to select the desired

subtitle language

• The default is Off.

VCD, CD

Stereo

Press the … or † button to select On.

ENG

Off

•

Press the

Right.

√

button to select stereo Left or

• To make the menu bar disappear, press the

SUBTITLE button again.

Press the

language or audio setup on the DVD.

√

button to select the desired

•

Languages are represented by abbreviations, e.g.

ENG for English.

ꢀ The subtitle languages are represented by

abbreviations.

Note

ꢀ This function depends on what languages are

encoded on the disc and may not work with all

DVDs.

ꢀ This function depends on what languages are

encoded on the disc and may not work with all

DVDs.

Note

ꢀ A DVD disc can contain up to 32 subtitle

languages.

ꢀ A DVD disc can contain up to 8 audio

languages.

ꢀ How to have the same subtitle language come

up whenever you play a DVD; Refer to “Setting

Up the Language Features” on page 38.

ꢀ How to have the same audio language come

up whenever you play a DVD ; Refer to “Setting

Up the Language Features” on page 38.

English - 47

Download from Www.Somanuals.com. All Manuals Search And Download.

Changing the Camera

Angle

Zoom

Some DVD Movies provide you with various camera

angle views on the same scene while they are showing.

To activate the feature press the ANGLE button.

During playback, press the MENU button.

Press the … or † button to select FUNC, then

press the OK or √ button.

The Function menu is displayed.

You’ll see the angle icon while watching a DVD

with multi angles available.

Function

SETUP

DVD

DVD Function

VCR Function

√

VCR

PROG

FUNC

When the angle icon comes up to the screen press

the ANGLE button to see the angle menu.

RETURN

Press the … or † button to select DVD Function,

then press the OK or √ button.

Press the … or † button to select ZOOM, then

press the OK or √ button.

DVD Function

SETUP Title Menu

Disc Menu

DVD

Info

Zoom

VCR

Press the œ or √ button to select a camera angle

you may wish to see.

Bookmark

Repeat

PROG

FUNC

Ez View

RETURN

Press the … / † or œ / √ buttons to select the part

of the screen you want to zoom in on, then press

the OK button.

• Press the OK button to zoom in

2X/4X/2X/Normal in order.

ꢀ

Depending on a disc, the Zoom function may

not work.

Note

48 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Marks

Repeat Chapter/Title

Up to three Bookmarks can be inserted for a given DVD/

VCD , allowing you to quickly jump to your favourite

scene or song.

You can repeat a single chapter or a complete title.

Press the REPEAT button while in playback mode

to open the repeat menu.

The current repeat mode is displayed.

During playback, press the MARK button.

Press the œ or √ button to select Chapter/Title.

Press the OK button to repeat the current

chapter/Title.

DVD

Chapter Title A - B

Chapter

Title

Press the œ or √ button to select one of the three

mark placeholders (- - -).

Keep on playing the DVD up to the scene you

want to mark, then press the OK button. The

placeholder (-) is changed to a number (1, 2 or 3).

VCD, CD

Tra

pter

istl

A - B

O^Off^ff

CLEAR

–

• The menu will display Track/Disc in place of

Chapter/Title if you are playing a VCD/CD.

• You may continue to set up to three marks.

Press the MARK button when complete.

Cancel Chapter/Title

❚

Recalling a Marked Scene

❚

1 During playback, press the MARK button.

Press the REPEAT button to open the repeat

menu.

2 Press the √ll button to play the mark.

Press the œ or √ button to selected Off, then

press the OK button.

Clearing Mark

❚

DVD

1 During playback, press the MARK button.

2 Press the œ or √ button to select the mark you want

to delete.

3 Press the CLEAR button to delete the mark.

• Press the MARK button again to exit the mark menu.

Chapter

Chapter Title A - B

Title

Off

VCD, CD

ꢀ Up to three scenes may be marked at a time.

ꢀ When in VCD 2.0 mode (MENU ON mode), this

Note

function does not work.

Track

Chapter Title A - B

Disc

Off

ꢀ Use the DISC MENU button in the VCD 2.0

mode to select MENU ON or OFF.

ꢀ Depending on the disc, the mark function may

not work.

• It is available to press the CLEAR button in order

to stop repeat play.

English - 49

Download from Www.Somanuals.com. All Manuals Search And Download.

Press the OK button again at the end of the

segment you want to repeat (Point B).

The segment will begin repeating in a continuous

loop.

A to B Repeat

Cancel A-B Repeat

❚

A to B Repeat feature enables you to repeat the

designated section on a DVD or VCD/CD. To activate,

mark where to start (A) and where to end (B) of the

section you want to watch.

Press the REPEAT button to open the repeat

menu.

Press the œ or √ button to selected Off, then

press the OK button.

Press the REPEAT button while in playback mode,

then press the œ or √ button to select A-.

DVD

Off

Chapter Title

Chapter Title A - B

Off

Chapter

Title

Chapter Title AA --BB

VCD, CD

Off

Track

Chapter Title A - B

Disc

Off

Track

Disc

Chapter Title AA --BB

• It is available to press the CLEAR button in order

to stop repeat play.

Press the OK button at the beginning of the

segment you want to repeat (Point A).

The B is selected.

ꢀ When in VCD 2.0 mode (MENU ON mode), this

function does not work.

Note

DVD

ꢀ Use the DISC MENU button in the VCD 2.0

mode to select MENU ON or OFF.

Off

ter TTitlietle AA --BB

VCD, CD

Off

rackapter DiTscitle AA --BB

• The minimum A-B Repeat time is 5 seconds.

50 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

CD-R MP3 discs

❚

MP3 Play

When playing CD-R/MP3 discs, please follow all

the recommendations for CD-R above, plus the

comments below:

Your MP3 files should be ISO 9660 or

JOLIET format.

If you insert an MP3 Disc into the DVD-VCR, you can see

the folder directory.

ISO 9660 format and Joliet MP3 files are

compatible with Apple's Mac. These two formats

are the most widely used.

MP3 Play Function

Press the … or † button to select the desired

music folder, then press the OK button.

❚

When naming your MP3 files do not

exceed 8 characters, and place ".mp3"

as the file extension.

General name format of: Title.mp3..

Total : 3/4

When composing your title, make sure that you

use 8 characters or less, have no spaces in the

name, and avoid the use of special characters

including: (.,/,\,=,+).

ROOT

AVI

JPEG

MP3

WMA

Use a decompression transfer rate of at least

128Kbps when recording MP3 files.

Sound quality with MP3 files basically depends

on the rate of compression/decompression you

choose. Getting audio CD quality sound requires

an analog/digital sampling rate, that is conversion

to MP3 format, of at least 128Kbps and up to

160Kbps. However, choosing higher rates, like

192Kbps or more, only rarely give better sound

quality. Conversely, files with decompression

rates below 128Kbps will not be played properly.

• Up to 8 music folders can be displayed at a time.

If you have more than 8 folders on a disc, press

the † button to display them.

Press the … or † button again to select a music

file. Press the OK button to begin playback of a

music file.

Do not try recording copyright protected MP3

files.

Total : 1/3

ROOT

AVI

Certain "securized" files are encrypted and code

protected to prevent illegal copying. These files

are of the following types: Windows MediaTM

(registered trade mark of Microsoft Inc) and

SDMITM (registered trade mark of The SDMI

Foundation). You cannot copy such files.

MP3

JPEG

MP3

WMA

Important :

The above recommendations cannot be taken as

a guarantee that the DVD-VCR will play MP3

recordings, or as an assurance of sound quality.

You should note that certain technologies and

methods for MP3 file recording on CD-Rs prevent

optimal playback of these files on your DVD

player (degraded sound quality and in some

cases, inability of the player to read the files).

Repeat

❚

Press the REPEAT button in play mode to hear

only music continuously and press it once again to

release.

Total : 1/3

ROOT

AVI

MP3

JPEG

MP3

WMA

Repeat file

Download from Www.Somanuals.com. All Manuals Search And Download.

Random Play

❚

Program & Random Play

(CD/MP3)

Press the MODE button in the stop mode.

Press the œ or √ button to select RANDOM.

Press the OK button.

The disc will be played in random order.

You can listen to songs randomly or in the desired

sequence.

PROGRAM

RANDOM

Program Play

❚

Press the MODE button in the stop mode.

Press the œ or √ button to select PROGRAM.

Press the OK button.

RETURN

PROGRAM

RANDOM

ROOT

AVI

MP3

JPEG

MP3

WMA

RETURN

Press the …/†,œ/√ buttons to select the first track

to add to the program.

Press the OK button.

The selection numbers are displayed in the

Program Order box.

• Depending on the disc, the Program and

Random Play functions may not work.

• The MODE button is prohibited in MP3 disc if a

file is not highlighted.

PROGRAM 01

• To resume normal play, press the CLEAR button.

Track

Program Order

- - - - - - - -

01 02 03 04

05 06 07 08

09 10 11 12

13 14 15 16

RETURN

CLEAR

Press the √ll button.

The disc will be played in programmed order.

Cancel Program play

❚

During playback, press the CLEAR button.

52 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Album Mode

❚

Picture CD Playback

Press the œ or √ button to select

Press the OK button.

The album mode is displayed.

Album

Photo : 1/215

If you insert a Picture (JPEG) CD Disc into the DVD-

VCR, you can see the folder directory.

Press the … or † button to select the picture you

want to view, then press the OK button.

The selected picture is displayed.

Total : 1/215

ROOT

• Press the …/†,œ/√ buttons to select the required

picture, then press the OK button.

The selected picture is displayed.

• Press the lœœ or √√l button to display the

previous or next 6 pictures.

ROOT

JPEG

JPEG01

JPEG02

JPEG03

JPEG04

JPEG05

JPEG06

JPEG07

Rotation

❚

Press the œ or √ button to select

Each time the OK button is pressed, the picture

rotates 90 degrees clockwise.

Press the lœœ or √√l button to display the

previous or next picture.

Photo : 1/215

RETURN

Photo : 1/215

RETURN

Zoom

❚

Press the œ or √ button to select

Each time the OK button is pressed, the picture is

enlarged up to 4X.

(Normal ➝ 2X ➝ 4X ➝ Normal)

ꢀ

If no buttons on the remote control are

pressed for 10 seconds, the menu bar will

disappear. Press the DISC MENU button on

the remote control to display the menu bar.

Note

Photo : 1/215

RETURN

English - 53

Download from Www.Somanuals.com. All Manuals Search And Download.

Slide show

CD-R JPEG Discs

❚

Press the œ or √ button to select

Press the OK button.

The 3 icons are displayed for time interval.

• Only files with the “.jpg” and “.JPG” extensions can be

played.

• If the disc is not closed, it will take longer to start

playing and not all of the recorded files may be played.

Photo : 1/215

• Only CD-R discs with JPEG files in ISO 9660 or Joliet

format can be played.

RETURN

• The name of the JPEG file may not be longer than 8

characters and should contain no blank spaces or

special characters (. / = +).

• Only a consecutively written multisession disc can be

played. If there is a blank segment in the multisession

disc, the disc can be played only up to the blank

segment.

• When playing a Kodak Picture CD, only the JPEG files

in the pictures folder can be played.

Timer :

RETURN

• Picture discs other than Kodak Picture CD may take

longer to start playing or may not play at all.

• If a number of files in 1 Disc is over 500, only 500

JPEG file can be played.

• If a number of folders in 1 Disc is over 300, only

JPEG files in 300 folders can be played.

• Si un disco contiene más de 500 archivos, sólo se

podrán reproducir 500 archivos JPEG.

• Si un disco contiene más de 300 carpetas, sólo se

podrán reproducir los archivos JPEG de las 300

carpetas.

Press the œ or √ button to select one of these.

Press the OK button.

When this icon is selected and the OK button is

pressed, the pictures change automatically with

about an 6 interval of 6 secords.

The pictures change automatically with about an

interval of 12 seconds.

The pictures change automatically with about an

interval of 18 seconds.

• Depending on the file size, each interval

between images may take longer or shorter

than the manual suggests.

54 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

DivX/MPEG4 Special

Playback Features

DivX/MPEG4 Playback

When the disc is inserted, the file structure of

the disc will be shown. Depending on the file

format, a different icon will appear next to each

During DivX/MPEG4 playback you can select from

the following special playback options.

To resume normal playback, press the √ll button.

file. The

files will have been highlighted.

Use … or † button to select the movie file, and

then press OK or √ll.

Result : When the 'Reading Index......' message

is displayed, wait for a second or two.

The movie will be played back.

Still

Press the √ll button on the remote control during

playback.

• The picture will still and the audio will mute.

• To resume playback, press the √ll button.

• If the player is left in Still mode for 5 minutes, it

will stop automatically.

DivX

Frame Advance (Step)

While in playback mode, press the F.ADV/STEP

button on the remote control to advance one frame

at a time.

• Audio is muted during Frame Advance mode.

• Press √ll to resume normal playback.

ꢀ

Frame Advance operates only in the forward

direction.

Note

If the "Cannot Support" message is displayed, the

selected file cannot be played back.

Slow Motion

During playback, press the √ll button to Still the

image. Then use the Search √√ to play in forward

slow motion at variable speeds.

To navigate to a specific time while viewing the

movie, press the DISPLAY key.

The file format of the current file (

information will be displayed.

•Each press increases the slow motion speed

playback to 1/8, 1/4 or 1/2 normal speed.

•Audio is muted during slow motion playback.

•The Search function may not operate depending

on the condition of the disc.

) and time

Use the number keys on the remote control to

enter the time to jump to that time in the movie.

Stop/Resume

• Press the button once to stop playback. To

■

resume the DivX/MPEG4 from the point where

the disc stopped, press the √ll button.

DivX

English - 55

Download from Www.Somanuals.com. All Manuals Search And Download.

Zoom

During play, press the MENU button on the remote

control. Then press the … or † button to select the

FUNC, then press the OK or √ button.

The Function menu is displayed.

Press the … or † button to select DVD Function.

Press the OK or √ button.

Function

SETUP

DVD

DVD Function

VCR Function

√

VCR

PROG

FUNC

RETURN

• Press the … or † button to select ZOOM, then

press the OK button.

DVD Function

SETUP Title Menu

Disc Menu

DVD

Info

Zoom

VCR

Bookmark

Repeat

PROG

FUNC

Ez View

RETURN

Auto Scaling : CIF(100kbps)~D1(784kbps)

resolution. If the file resolution is

small, it scales up to 2 times

automatically. So you can see the

more larger screen.

56 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Reference

Technical Specifications

Troubleshooting Guide (VCR)

Troubleshooting Guide (DVD)

• Technical Specifications . . . . . . . . . . . . . . . 58

• Troubleshooting Guide (VCR) . . . . . . . . . . . 59

• Troubleshooting Guide (DVD) . . . . . . . . . . . 60

English - 57

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical Specifications

Rated voltage

Power consumption

Weight

AC 220 - 240V, 50Hz

19 Watts

3.6 Kg

General

Size

430mm X 282mm X 82mm

+5°C ~ +40°C

Operating ambient temperature

Installation conditions

Operation position : Horizontal,

Relative humidity : Below 75%

Euro Scart socket : 1.0Vp-p (unbalanced) 75Ω

Euro Scart socket : -8dBm, 47Kohm unbalanced

RCA jack

Video input (Rear)

Audio input (Rear)

Input (Front)

Input

RF out

UHF 21-69 (Initial CH60)

RCA jack, Euro Scart socket

COAXIAL, RCA jack

Audio (DVD, VCR)

Audio (DVD only)

Video (DVD, VCR)

Video (DVD only)

Output

RCA jack, Euro Scart socket

S-Video out

RGB out : Euro Scart socket

VHS type video tape

Tape format

Colour system

Tuning system

Video S/N

PAL, NTSC4.43, NTSC playback on PAL TV

B/G, D/K

VCR

Above 43dB (standard recording)

Above 240 lines (standard recording)

Above 68dB (Hi-Fi), 39dB (Mono)

20Hz - 20KHz (Hi-Fi)

Resolution

Audio S/N

Audio frequency characteristics

Disc

DVD, CD (12cm, 8cm), VCD

100dB

DVD

Audio S/N

Audio dynamic range

95dB

58 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting Guide (VCR)

Before contacting the Toshiba after-sales service, perform the following simple checks.

If you are unable to solve the problem after reading the below instructions, note:

•

The model and serial number on the rear of your DVD-VCR

The warranty information

A clear description of the problem

Then contact your nearest TOSHIBA after-sales service.

Problem

Solution

No power

◆ Check that the power plug is connected to a wall outlet.

◆ Have you pressed the ON/STANDBY button?

You cannot insert a video cassette

◆ A video cassette can only be inserted with the window

side up and the safety tab facing you.

The television programme

was not recorded

◆ Check the DVD-VCR aerial connections.

◆ Is the DVD-VCR tuner properly set?

◆ Check if the safety tab is intact on the cassette.

Timer recording was unsuccessful

◆ Was the ON/STANDBY button pressed to activate the timer?

◆ Re-check the recording start/stop time settings.

◆ If there was a power failure or interruption during timer recording, the

recording will have been cancelled.

No playback picture or the picture

is distorted

◆ Check to see if you are using a prerecorded tape.

You cannot see normal broadcasts

Noise bars or streaks on playback

◆ Check the tuner or external setting. It should be on tuner.

◆ Check the TV or VCR aerial connections.

◆ Press the TRK (

…

†

)

buttons to minimize this effect.

When the

during playback, the still picture

has severe “noise bars” streaks

button is pressed

◆ A still picture may have “noise bars”, depending on the condition of the tape.

Press the TRK ( or buttons during slow motion to minimize this effect.

√

…

†)

Video Head Cleaning

◆ If poor pictures appear on a variety of cassettes, the video heads may need

cleaning. This is not a common problem and unless it appears, the heads

should not be cleaned. When cleaning the video heads, read all instructions

provided with the head cleaning cassette. Incorrect head cleaning can

permanently damage the video heads.

1. Remove the aerial input plug from the socket marked (aerial symbol) on

the rear of the DVD-VCR.

2. Carry out the instructions “Tuning Your Television for the DVD-VCR” (see

page 14).

3. Carry out the instructions “Setting the DVD-VCR output Channel” (see

page 21), move the channel number several channels down from the

original setting.(example: from 36 to 37).

4. Replace the aerial plug into the socket marked (aerial symbol) on the rear

of the DVD-VCR.

5. Re-tune your TV to the DVD-VCR again by following instructions “Tuning

Your Television for the DVD-VCR” (see page 14).

6. If the problem still exists repeat steps 1 to 5 moving several more

channels away from the original setting.

If when tuning in your TV to the

DVD-VCR TV does not find the Screen

or the pattern when found suffers from

interference, it may be due to the DVD-VCR

output channel clashing with the normal

TV transmissions in your area.

To prevent this you will need to change the

DVD-VCR output channel in the following way

English - 59

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting Guide (DVD)

Problem

Solution

Page

◆ Ensure that the disc is installed with the label side facing up.

◆ Check the region number of the DVD.

◆ This player cannot play CD-ROMs, DVD-ROMs, etc. Insert a DVD,

or a CD.

Disc does not play.

◆ 5.1 channel sound is reproduced only when the following

conditions are met. :

1) The DVD-VCR player is connected with the proper amplifier

2) The disc is recorded with 5.1 channel sound.

◆ Check whether the disc being played has the “5.1 ch” mark on the

outside.

5.1 channel sound is not

being reproduced.

P11

P39

◆ Check if your audio system is connected and working properly.

◆ The features or action cannot be completed at this time because:

1. The DVD’s software restricts it.

2. The DVD’s software doesn’t support the feature (e.g., angles).

3. The feature is not available at the moment.

4. You’ve requested a title or chapter number or search time that is

out of range.

The

screen.

icon appears on

P37~55

Playback mode differs from

the Setup menu selection.

◆ Some of the functions selected in the Setup menu may not work

properly if the disc is not encoded with the corresponding function.

P37~42

P40

The screen ratio cannot be

changed.

◆ The screen ratio is fixed on your DVDs.

◆ Make sure you have selected the correct Digital Output in the

Audio Options Menu.

No audio.

P39

◆ With no disc in the unit, press the œœ and √√ buttons

simultaneously on the front panel for five seconds. Power off and

on the DVD-VCR by pressing ON/STANDBY button. The parental

mode is now unlocked as indicated on the display. You can now

set your rating level and change your password to a new number.

Forgot password

P41-42

◆ Go to the contents and find the section of the instruction book that

contains the explanations regarding the current problem, and

follow the procedure once again.

◆ If the problem still cannot be solved, please contact your nearest

authorized service center.

If you experience other

problems.

60 - English

Download from Www.Somanuals.com. All Manuals Search And Download.

Thermos Gas Grill 465630003 User Manual
Toastmaster Oven 389U User Manual
Tokina Camera Accessories TC1214DC User Manual
Toshiba Digital Camera IK HR1D User Manual
Tribest Food Saver SD P9000GP User Manual
Tyan Computer Network Card S2721 User Manual
UTStarcom Cell Phone CDM8964VM User Manual
VeriFone Video Games PCC 5 7 1h User Manual
VistaQuest Digital Camera PC30I User Manual
Weed Eater Blower 530088127 User Manual