Toshiba DVD Player SD4300 User Manual

SD4300KU

Owner’s Record

The model number and serial number are on the back

of your DVD Player. Record these numbers in the spaces

belowꢀ Refer to these numbers whenever you

communicate with your Toshiba dealer about this DVD

Player.

Model number:

Serial number:

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one

wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third

prong are provided for your safety. If the provided plug does not ﬁt into your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the

point where they exit from the apparatus.

11. Only use attachments/accessories speciﬁed by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold with

the apparatus. When a cart is used, use caution when moving the cart/apparatus combination

to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in

any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the

apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

Additional Safety Instructions

15. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in a risk of ﬁre

or electric shock.

16. Apparatus shall not be exposed to dripping or splashing and no objects ﬁlled with liquids, such as vases, shall be

placed on the apparatus.

17. Keep your ﬁngers well clear of the disc tray as it is closing. Neglecting to do so may cause serious personal injury.

18. Do not place a heavy object on or step on the apparatus. The object may fall, causing serious personal injury and

serious damage to the apparatus.

19. Do not use a cracked , deformed, or repaired disc. These discs are easily broken and may cause serious personal

injury and apparatus malfunction.

20. If the apparatus should smoke or smell,immediately disconnect the power cord from the wall outlet. Wait until the

smoke or smell stops, then ask your dealer for a check and repair. Neglecting to do so may cause ﬁre.

21. While it is thundering, do not touch the connecting cables or the apparatus.

22. Warning: To prevent the spread of ﬁre, keep candles or other open ﬂames away from this product at all times.

CAUTION:

This Digital Video Disc Player employs a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference

Should the unit require maintenance, contact an authorized service location.

Use of controls or adjustments or performance of procedures other than those speciﬁed herein may result in

hazardous radiation exposure.

To prevent direct exposure to laser beam, do not try to open the enclosure.

Visible and invisible laser radiation when open and interlocks defeated.

DO NOT STARE INTO BEAM.

Location of the required label:

CERTIFICATION:This product complies

with FDA Rule 21 CFR Subchapter J in

effect at date of manufacture.

CAUTION: These servicing instructions are for use by qualiﬁed service personnel only. To reduce the risk of

electric shock do not perform any servicing other than that contained in the operating instructions unless you are

qualiﬁed to do so.

Be aware that this equipment is still powered when in standby mode. To disconnect this equipment completely from the

mains power, pull out the power plug from the wall outlet.

The mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

Environmental Information

All unnecessary packaging has been omitted. The packaging has been made easy to separate into three materials;

cardboard (box), polystyrene foam (buffer) and polyethylene (bags, protective foam sheet).

Your DVD player consists of materials which can be recycled and reused if disassembled by a specialised company.

Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old

equipment.

LASER

Type

Semiconductor laser

InGaAIP(DVD)

AIGaAs(CD)

Wave length

657 nm(DVD)

790 nm(CD)

Output Power

5.5 mW(DVD)

7.0 mW(VCD/CD)

Beam divergence 60 degrees

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢁ

Introduction

CAUTION!

WARNING:

Do not use solvents such as benzene, thinner,

commercially available cleaners, or anti-static sprays

intended for analog discs. Since the optical unit

(laser) of the DVD system operates at a higher

power than regular DVD or CD players, cleaning

CDs intended for DVD or CD players may damage

the optical unit (laser). Therefore, refrain from using

a cleaning CD.

RISK OF ELECTRIC SHOCK!

Never attempt to service this product yourself.

Opening and removing the covers may expose you

to dangerous voltage or other hazards. Failure to

follow this WARNING may result in death or serious

injury. Refer all servicing not speciﬁed in this manual

to a Toshiba Authorized Service Center.

Moisture Condensation

Setup

Moisture condensation damages the DVD player.

Please read the following carefully. Moisture

condensation occurs, for example, when you pour a

cold drink into a glass on a warm day. Drops of water

form on the outside of the glass. In the same way,

moisture may condense on the optical pick-up lens

inside this unit, one of the most crucial internal parts

of the DVD player.

Finding a suitable location

-Place the set on a ﬂat, hard and stable surface.

-Do not place the set on a carpet.

-Do not position the set on top of other equipment

that might heat it up (e.g., receiver or ampliﬁer).

-Do not put anything under the set

(e.g.CDs, magazines).

-Install this unit near the AC outlet and where the

AC power plug can be reached easily.

If you use the DVD player in such a situation, it may

damage discs and internal parts. Remove the disc,

connect the power cord of the DVD player to the wall

outlet, turn on the DVD player, and leave it for two or

three hours. After two or three hours, the DVD player

will have warmed up and evaporated any moisture.

Keep the DVD player connected to the wall outlet

and moisture condensation will seldom occur.

Space for ventilation

-Place the apparatus in a location with adequate

ventilation to prevent internal heat build up. Allow at

least 10 cm (4.0'') clearance from the rear and the

top of the set and 5 cm (2.0'') from the left and right

to prevent overheating.

5cm (2.0")

10cm (4.0")

5cm (2.0")

10cm (4.0")

Region Codes

This DVD player is designed to support the Region

Management System. Check the regional code

number on the disc package. If the number does

not match the player' s region number (see table on

page 4), the player may be unable to playback the

disc.

Avoid high temperatures, moisture, water and

dust

-Apparatus shall not be exposed to dripping or

splashing.

-Do not place any sources of danger on the

apparatus (e.g., liquid ﬁlled objects, lighted candles).

Tips:

-It may not be possible to play CD-R/RW , DVD⁺R/

RW , or DVD⁺R DL in all cases due to the type of

disc or condition of the recording.

-If you are having trouble playing a certain disc,

remove the disc and try a different one. Improperly

formatted disc will not play on this DVD Player.

Cleaning discs

Some problems occur because the disc inside the

system is dirty (frozen picture, sound disruptions,

picture distortions). To avoid these problems, discs

should be cleaned on a regular basis.

To clean a disc, use a micro ﬁbre cleaning cloth

and wipe the disc from the center to the edge in a

straight line. Do not touch the playback side of the

disc.

ꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Discs that can

be played

Region

U.S.A. and

Canada regions

ALL

U.K.,

Europe regions and

Japan

ALL

Asia Paciﬁc,

Taiwan, Korea

Australia,

New Zealand,

Latin America

Russia and

India regions

China, Calcos Islands,

Walls and Futuna

Islands

This product incorporates copyright protection tech-

nology that is protected by method claims of certain

U.S. patents and other intellectual property rights

owned by Macrovision Corporation and other rights

owners. Use of this copyright protection technology

must be authorized by Macrovision Corporation, and

is intended for home and other limited viewing uses

only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is

prohibited.

Notes on copyright

The unauthorized recording, use, distribution, or revision

of television programs, videotapes, DVDs and other

materials, is prohibited under the Copyright Laws of the

United States and other countries, and may subject you

to civil and/or criminal liability.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢃ

Introduction

Table of Contents

Introduction

SAFETY PRECAUTIONS

IMPORTANT SAFETY INSTRUCTIONS

Setup

1-2

Cleaning discs

Moisture Condensation

Region Codes

Table of Contents

3-4

Connections

Connecting to television

Connecting to a Stereo System

Connecting to a Digital AV Receiver

Connecting the power cord

Product Overview

Front and Rear panels

Remote Control

Getting Started

Inserting Batteries

Finding your viewing channel

Setting up Progressive Scan feature

Setting the language

11-12

^.Playback from Disc

Playable discs

12-13

Playback Feature

Starting disc playback

Basic playback control

13-14

14-15

Operations for video playback (DVD/VCD/SVCD)

Selecting various repeat functions

Viewing the disc playback Information

Special DVD Features

Special VCD and SVCD Features

Playing MP3/JPEG/Kodak picture CD

16-17

DVD Menu Options

Using the Language setup menu

Using the Video setup menu

Using the Audio setup menu

Using the Rating setup menu

Using the Misc (Miscellaneous) setup menu

Tray Lock

17-18

18-19

19-20

Others

Speciﬁcations

Troubleshooting

Glossary

22-23

Limited United States Warranty

Canadian Warranty Information

26-27

ꢄ

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

corresponding Component video input jacks (or

labeled as Y, Pb, Pr) on the TV (cable not supplied).

Use the audio cables (white/red) to connect AUDIO

OUT (L/R) jacks of the DVD player to the

corresponding AUDIO IN jacks on the TV (cable not

supplied).

Connecting to television

IMPORTANT!

– You only need to make one video connection

from the following options, depending on the

capabilities of your television.

– Connect the DVD player directly to the

television.

Proceed to page 11 for detailed Progressive Scan set

up.

Using a RF modulator

Using Composite Video Jack(CVBS)

Use the composite video cable (yellow) to connect

the DVD player' s VIDEO(CVBS) jack to the video

input jack(or labeled as A/V in, Video In or

Composite) on the TV(cable supplied).

To hear the sound of this DVD player through your

TV, use the audio cables(white/red)to connect

AUDIO OUT(L/R)jacks of the DVD player to

corresponding AUDIO IN jacks on the TV(cable

supplied).

IMPORTANT!

-If your TV only has a single Antenna In jack (or

labeled as 75 ohm or RF In), you will need an RF

modulator in order to view the DVD playback on

the TV.

Use the composite video cable (yellow) to connect

the DVD player' s VIDEO (CVBS) jack to the video

input jack on the RF modulator (cable supplied).

To hear the sound of this DVD player through your

TV, use the audio cables(white/red) to connect

AUDIO OUT (L/R) jacks of the DVD player to the

corresponding AUDIO IN jacks on the RF modulator

(cable supplied).

Using Component Video Jacks(Y, PB, PR)

Use the RF coaxial cable (not supplied) to connect

ANTENNA OUT or TO TV jack on the RF modulator

to the ANTENNA IN jack on the television.

Connect the Antenna or Cable TV service signal to

the ANTENNA IN or RF IN jack on the RF modulator.

(It may have been connected to your TV previously.

Disconnect it from the TV.)

IMPORTANT!

-The progressive scan video quality is only

possible when using Y, PB, PR and a progressive

scan TV is required.

Use the component video cables (red/blue/green) to

connect the DVD player' s Y, PB, PR jacks to the

Helpful hint: Before making or changing any connections, make sure that all the devices are

disconnected from the power outlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ

Connections

Connecting to a Stereo System

Connecting to a Digital AV Receiver

Receiver has a PCM, Dolby Digital or MPEG

decoder

Stereo System with Left/Right Audio In Jacks

Select one of the video connections (CVBS VIDEO

IN or COMPONENT VIDEO IN)

depending on the options available on your TV.

Use the audio cables (white/red) to connect AUDIO

OUT (L/R) jacks of the DVD Player to the

Select one of the video connections (CVBS VIDEO IN

or COMPONENT VIDEO IN)

depending on the options available on your TV.

Connect the COAXIAL jack of the DVD player to the

corresponding Digital Audio In jack on your Receiver

(cable not supplied).

Set the DVD Player' s Digital Output to PCM or All

depending on the capabilities of your Receiver (see

page 19 {Digital Output}).

corresponding AUDIO IN jacks on the stereo system.

Tip:

-If the audio format of the Digital Output does not

match the capabilities of your receiver, the receiver

will produce a strong, distorted sound or no sound at

all.

Helpful hint: Before making or changing any connections, make sure that all the devices are

disconnected from the power outlet.

ꢅ

Download from Www.Somanuals.com. All Manuals Search And Download.

Connections

Connecting the power cord

After everything is connected properly, plug in the AC

power cord to the power outlet.

Never make or change any connections with the

power switched on.

Helpful hint: Before making or changing any connections, make sure that all the devices are

disconnected from the power outlet.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢆ

Product Overview

Front and Rear panels

I/2ON/STANDBY

-Turns the player on or switches it to

standby mode

Disc tray

- Place a disc here

B/X PLAY/ PAUSE

-Starts or pauses playback

çOPEN/CLOSE

- Opens or closes the disc tray

STOP

- Stops playback

IR Sensor

- Points the remote control towards this sensor

Display

- Shows information about the current status

of the DVD Player

MAINS ~

- Connects to a standard AC outlet

AUDIO OUT (Left/Right)

- Connects to Audio input of a TV, an ampliﬁer,

receiver or stereo system

Y, PB, PR Component Video Out

- Connects to Y, PB, PR input of a TV

COAXIAL(Digital audio out)

- Connects to coaxial Audio input of a digital audio

equipment

VIDEO Out (CVBS)

- Connects to CVBS Video input of a TV

DVD display

The indicators vary depending on the kinds of disc you play.

Chapter/Track

number indicator

DVD video disc

VIDEO CD

Audio CD

•During playback:

Example

•During playback:

Example

•During playback:

Example

The Chapter number The track number is The track number is

is displayed.

displayed.

Multifunctional indicator (indicates

operating status or messages, etc.)

Power Off

Open

No disc

Bad disc

"----" may also appear in other situation.

ꢇ

Download from Www.Somanuals.com. All Manuals Search And Download.

Product Overview

Remote Control

See the page in [ ] for details.

[ 15 ]

REMOTE SIGNAL EMITTER

DISPLAY

[ 11 ]

-Displays information on

-Point remote control to the sensor on

the front panel

TV screen during playback

[ 11, 13 ]

ON / STANDBY

[ 13 ]

OPEN/CLOSE

-To switch the DVD player to ON or

-Open/close the disc tray

standby mode

[ 13, 15, 20 ]

-Selects numbered items in a menu

Number Buttons

[ 15 ]

T - SEARCH

-Start playback from a designated

-Press to enter track/chapter/title

numbers or password directly

point

[ 11, 17 ]

SETUP

-Enters or exits the system setup

[ 13 ]

+10 button

-Press to enter number greater than 9

-Press +10 button repeatedly to select

10,20,30...etc

   [ 14, 16, 17 ]

-Cursor buttons for moving to the left

/ right / up / down

-To rotate the JPEG picture during

playback

[ 14, 15 ]

-Enters or exits the disc menu

-Switches on or off the Playback

Control (PBC) mode (for VCD 2.0 /

SVCD only)

STEP

-Play video frame by frame

[ 13, 14 ]

-Starts or pauses playback

[ 14 ]

PLAY/PAUSE

[ 12 ]

-Acknowledge menu selection

STOP



-Stops play

[ 15 ]

RETURN

-To go back to previous menu

[ 15, 16 ]

-Show title menu

-Press to view a page of 9 thumbnail

images during JPEG playback

[ 15 ]

SUBTITLE

TITLE

-To access subtitle language

[ 15 ]

ANGLE

-Switch the camera angle during

playback

[ 15 ]

AUDIO

[ 14, 16 ]

-Do a forward/reverse search

F.R & F.F

-Selects an audio setting (DVD) or an

audio channel (VCD)

[ 13, 15, 16 ]

-Skip to previous / next chapter /track

PREV & NEXT

[ 14, 17 ]

ZOOM

-Enlarge a picture on the TV

[ 14 ]

REPEAT

-Selects various repeat mode

[ 15 ]

-Repeats playback from point A to B on

[ 16 ]

RANDOM

-Toggles between Normal and

Random playback

A-B

a disc

[ 14 ]

PROG

-To program playback or cancel the

program playback

[ 14 ]

SLOW

-Do a slow forward

[ 14 ]

CLEAR

-Delete the mistyped entries or cancel

some functions

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀ0

Getting Started

and highest channels and may be called FRONT,

A/V IN or VIDEO. See your TV' s manual for more

details.

Inserting Batteries

Or, you may go to channel 1 on your TV, then

press the Channel down button repeatedly until you

see the Video In channel.

Or, the TV remote control may have a button that

chooses different video modes.

Or, set the TV to channel 3 or 4 if you are using an

RF modulator.

If you are using external equipment, (such as

audio system or receiver), turn it on and select the

appropriate input source for the DVD player output.

Refer to the equipment user’s manual for detail.

Open the battery compartment.

Insert two batteries type R03 or AAA, following the

indications (+ / - ) inside the compartment.

Close the cover.

Setting up Progressive Scan feature

CAUTION:

Never throw batteries into a ﬁre.

Note:

(For Progressive Scan TV only)

The progressive scan display twice the number

of frames per seconds than interlaced scanning

(ordinary normal TV system). With nearly double

the number of lines, progressive scan offers higher

picture resolution and quality.

- Be sure to use AAA size batteries.

- Dispose of batteries in a designated disposal area.

- Batteries should always be disposed of with the

environment in mind. Always dispose of batteries in

accordance with applicable laws and regulations.

- If the remote control does not operate correctly, or if

the operating range becomes reduced, replace batteries

with new ones.

- When necessary to replace batteries in the remote

control, always replace both batteries with new ones.

Never mix battery types or use new and used batteries

in combination.

- Always remove batteries from remote control if they

are dead or if the remote control is not to be used for an

extended period of time. This will prevent battery acid

Before you start...

-Ensure that you have connected this DVD player

to a progressive scan TV using the Y, PB, PR

connection (see page 6).

-Ensure that you have completed the basic

installation and set up.

Turn on your TV and select the video input

connected to the DVD player (refer to your TV user

manual).

Press 2ON/STANDBY on the remote control to turn

on the DVD player.

from leaking into the battery compartment.

The blue DVD background screen will appear on

the TV.

Press SETUP.

Using the Remote Control to Operate

the System

Press / to select { Video }, then press .

Aspect Ratio

View Mode

: 4:3

Language

Video

:Auto Fit

Video Out

Component

P-Scan

Within about 6m (19 feet)

Smart Picture

JPEG Interval

:5 Seconds

Audio

OPEN/CLOSE DISPLAY

ON/STANDBY

Rating

Misc

Aim the Remote Control directly at the remote sensor

(IR) on the front panel.

Do not put any objects between the Remote Control

and DVD Player while operating the DVD Player.

Press / to select { Video Out }, then press .

Select { P- Scan }, then press OK to conﬁrm.

The menu will appear on the TV.

Video Out

Activating Progressive Scan 1. Ensure

your TV supports Progressive Mode

2. If there is a distorted picture on the

TV, wait 15 seconds for automatic

recover

Finding your viewing channel

Press I/2ON/STANDBY on the DVD player to turn it

on.

Turn on the TV and set it to the correct video-in

channel. You should see the blue DVD background

screen.

Yes

Usually these channels are between the lowest

Helpful hint: Press  to go back to previous menu item.

Press SETUP to exit the menu item.

ꢀꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Getting Started/Playback from disc

on the disc, the disc’s default language will be used

instead.

Press  to highlight { Yes } and press OK to conﬁrm.

 The reconﬁrmation menu will appear on the TV.

Video Out

OSD language : English

Language

Subtitle

: Off

Confirm again to use new setting

14 Seconds

Video

Audio

English

Audio

DVD Menu

French

Spanish

Yes

Rating

Misc

Press  to highlight { Yes } and press OK to conﬁrm.

 The setup is now completed and you can start

enjoying the high quality picture.

Press SETUP.

To deactivate Progressive Scan

manually:

Wait for 15 seconds for the auto recovery.

Press / to select { Language }, then press .

Press / to highlight one of the options below,

then press .

{ Subtitle }

Select this to change the subtitle language.

{ Audio }

Select this to change the disc soundtrack language.

{ DVD Menu }

Select this to change the language of the disc menu.

Use / to select a language and press OK to

conﬁrm.

Press OPEN/CLOSE çon the DVD player to open

the disc tray.

Press number button ' 1 ' on the remote control for a

few seconds.

The DVD background screen appears.

Tip:

Repeat steps C - D for other language settings.

-There are some progressive scan TVs and High-

Deﬁnition TVs that are not fully compatible with this

unit, resulting in the unnatural picture when playing

back a DVD VIDEO disc in the progressive scan

mode. In such a case, turn off the progressive scan

feature on both the DVD player and your TV.

IMPORTANT!

- DVD discs and players are designed with regional

restrictions. Before playing a disc, make sure the

disc is for the same zone as your player.

- If ' 'appears on the TV screen when a button is

pressed, it means the function is not available on

the current disc or at the current time.

Setting the language

Choose your desired On-Screen Display(OSD)language

including English, French and Spanish.

Playable discs

On-Screen Display (OSD) Language

Using this DVD player, you can playback on the

following discs. Some of these discs may be

incompatible.

The On-screen language for the system setup menu

will remain as you set it, regardless of various disc

languages.

DVD Video disc(Digital Versatile Disc)

OSD language

Subtitle

English

Language

Français

Español

: English

Video

Audio

DVD⁺R/RW (DVD Recordable / Re-

writable), DVD⁺R DL (Dual layer) of

DVD Video format or Audio/Video

formats (e.g., MP3 and JPEG ﬁles).

DVD Menu

: English

Audio

Rating

Misc

Press SETUP.

Press / to select { Language }.

Press  to highlight { OSD language }, then press

.

CD-R (CD-Recordable)

Audio/Video formats (e.g., MP3 and

JPEG ﬁles).

Press / to select a language and press OK to

conﬁrm.

CD-RW (CD-Rewritable)

Audio/Video formats (e.g., MP3 and

JPEG ﬁles).

Subtitle, Audio and DVD Menu

language

Audio CD (Compact Disc

Digital Audio)

You can choose your own preferred language or

soundtrack from Subtitle, Audio and DVD Menu

languages. If the language selected is not available

Helpful hint: Press  to go back to previous menu item.

Press SETUP to exit the menu item.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀꢁ

Playback from disc/Playback Feature

– For DVD+R and DVD+RW multi border, both

Video CD

ﬁnalized and unﬁnalized disc cannot be supported.

(Formats 1.0, 1.1, 2.0)

Starting disc playback

Super Video CD

MP3-Disc

Turn on the TV and select the video input connected

to the DVD player.

Press 2ON/STANDBY to turn on the DVD player.

Press OPEN/CLOSE to open the disc tray.

Place a disc onto the disc tray with the label facing

up, then press OPEN/CLOSE.

is a trademark of DVD Format/Logo Licensing

Corporation.

Because of problems and errors that can occur

during the creation of DVD and CD software and/or

the manufacture of DVD and CD discs, Toshiba

cannot assure that this DVD player will successfully

play every disc bearing the DVD and CD logos. If you

happen to experience any difﬁculty playing a DVD

and/or CD disc on this DVD player, please contact

Toshiba Customer Service.

For double-sided discs, load the side which you

want to play facing up.

Playback may start automatically. If not, press PLAY/

PAUSE

If a disc menu appears on the TV, see page 14

'Using the disc menu'.

If the parental control was activated for the

inserted disc, you have to enter your four-digit

This DVD player requires discs/recordings to meet

certain technical standards in order to achieve

optimal playback quality. There are many different

types of recordable disc formats (including CD-R

containing MP3 ﬁles). Not all recordable discs will

operate or produce optimal playback quality. The

technical criteria set forth in this owner's manual are

meant only as a guide. Use of CD-RW for MP3 ﬁles

is not recommended.

password, see page 19.

For more playback features, see pages 13 - 17.

Tips:

-Do not overturn the DVD player while disc loading,

playing or ejecting.

-Do not close the disc tray manually even if the

power is switched off.

You must obtain any required permission from

content. Toshiba cannot and does not grant such

permission.

Basic playback control

Unless otherwise stated, all operations described are

based on Remote Control use.

Supported Formats

Pausing playback

MP3 tracks

During playback, press PLAY/PAUSE

playback and display a still picture.

to pause

-The ﬁle extensions have to be '.mp3 '.

-ISO format.

-Maximum 8 characters display for folder name.

-Maximum 14 characters display for ﬁle name.

-Supported sampling frequencies & corresponding

bit-rates;

Sound will be muted.

To resume normal playback, press PLAY/PAUSE

again.

Skipping chapter/track

32kHz, 64-320 kbps

 Press PREV

/ NEXT

to go to the previous

44.1kHz, 48kHz 80-320 kbps

JPEG/Pictures

or next chapter/track during playback.

When PREV

is pressed after the 5 seconds

-The ﬁle extensions has to be '.JPG ' and not

'.JPEG' .

of playback, playback will start from the beginning

of the current chapter/track. If you press the button

within the 5 seconds, playback will start from the

beginning of the preceding chapter/track.

-JPEG/ISO format.

-Maximum of 5760×3840 resolution can be

supported.

-Maximum ﬁle size: 5 Mbytes.

-Maximum of 500 ﬁles and 200 folders are

supported.

-When the number of ﬁles(or folders) reaches the

maximum limit, the rest of the ﬁles(or folders) cannot

be displayed.

-It can only display DCF-standard still pictures or

JPEG pictures such as TIFF.

Tips:

 Press DISPLAY to display the disc

information for title/chapter/track.

 Use Number buttons to enter valid chapter / track

number directly. For the track/chapter numbers which

are greater than ＂9＂, use ＂+10＂ button. Each

press increases the number by 10. Then press the

second digit of track/Chapter number.

The playback skips to the selected chapter / track.

Tip:

- For VCD 2.0 / SVCD discs, accessing tracks using

number buttons is not possible if the PBC mode is

turned on.

– Maximum 100 sessions for CD and 10 multi border

for DVD are supported.

– For DVD-R and DVD-RW multi border, only

ﬁnalized disc can be supported.

Helpful hint: Some discs cannot be played on this DVD player due to the conﬁguration and characteristics

of the disc, or due to the condition of recording and authorizing software.

ꢀꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback Feature

Stopping playback

ybac

Operations for video playback (DVD/

VCD/SVCD)

During playback, press STOP



The DVD player memorises the stopped point.

Press PLAY/ PAUSE

to resume playback from the

Using the disc menu

location where you stopped playback.

If you press STOP again, the DVD player will

cancel the resume function.



Depending on the disc, a menu may appear on the

TV screen once you load in the disc.

Tips:

To select a playback feature or item

Use / or number buttons on the remote control,

then press OK to start playback.

To access or remove the menu.

Press MENU on the remote control.

-Screen saver will start automatically if the disc

playback is stopped for about 2 minutes.

-The player will automatically switch to Power

Standby mode if you do not press any buttons for

about 22 minutes after the disc has stopped playing.

Zooming In

Program playback

This function allows you to enlarge the picture on the

TV screen and to pan through the enlarged picture.

During playback, press PROG, then the OSD will

appear as below:

During playback, press ZOOM repeatedly to display

the picture with different scales.

For VCD:

Program

Use /// to pan through the enlarged picture.

Playback will continue.

Press ZOOM repeatedly to return to the original size.

Track

Slow Motion

Track

Press SLOW during playback to select the required

speed: 1/2, 1/4, 1/8( forward only ).

Sound will be muted.

To return to normal speed, press PLAY/ PAUSE

Clear

Play

Clear All

Forward/ Reverse Searching

For DVD:

Program

You can fast forward or fast reverse a disc during

playback and select a desired search speed.

For DVD,VCD, SVCD,CD, MP3

Title

During playback, press F.R/ F.F to select the required

speed: X2, X8, X30, X100(backward or forward).

Sound will be muted (DVD/VCD/SVCD/MP3) or

intermittent (CD).

To return to normal speed, press PLAY / PAUSE

Clear

Play

Clear All

Selecting various repeat functions

Repeat play mode

Use the / and OK button to select your desired

title/chapter/track in the list.

When you have ﬁnished programming, press  to

move the cursor to the 'Play', then press the OK

button or directly press PLAY/PAUSE

start the program playback.

Press CLEAR or select ' Clear ' to delete one by one

from last chosen track / title /chapter or select 'Clear

All' to clear all the programmed tracks/titles/chapters.

Press STOP twice to cancel program playback.

button to

The repeat play options vary depending on the disc

type.

While playing a disc, press REPEAT repeatedly to

choose a repeat option.

For DVD

-Repeat Chapter (currently playing chapter)

-Repeat Title (currently playing title)

-Off (cancel)

For Video CD, Audio CD

-Repeat Single (currently playing track)

-Repeat All (entire disc)

-Off (cancel)

Helpful hint：The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀꢃ

Playback Feature

For MP3, JPEG

Use the number buttons ( 0-9 ) to input a valid

number or time ("0" cannot be input as the ﬁrst

number). (This function only apply to DVD/VCD/CD/

SVCD.)

Press OK to conﬁrm.

The playback skips to the selected title/chapter/

track/time.

-Repeat Single (currently playing ﬁle)

-Repeat All (current folder)

-Off (cancel)

Tip:

-For VCD2.0/SVCD discs, repeat playback is not

possible if the PBC mode is turned on.

Angle

Repeating a section within a title/track

You can repeat the playback of a speciﬁc segment

within a title or track. To do this, you must mark the

start and end of the segment you want.

 When {Angle} information appears on the screen,

press ANGLE button on the remote control

repeatedly to switch between different angles.

Playback will go to the selected angle.

While playing a disc, press A - B at your chosen

starting point.

Press A - B again at your chosen end point.

Special DVD Features

 The section will now repeat continuously.

To exit the sequence, press A - B.

Playing a Title

Press TITLE.

Viewing the disc playback Information

The disc title menu appears on the TV screen.

Use /// or number buttons (0-9) to select a

play option.

You can view the disc information (such as current

title/chapter/track number, total playing time or

remaining time on the disc) without interrupting the

disc playback.

Press OK to conﬁrm.

Changing the Audio Language

During playback, press DISPLAY repeatedly on the

remote control.

The available disc information appears on the TV

screen with the following sequence.

For DVD：

Press AUDIO repeatedly to select different audio

languages.

Changing the Audio Channel

For VCD：

Press AUDIO to select the available audio channels

(DVD)

DVD Video

Time

00：03：33/01：24：46

provided by the disc (Left, Right, Mix, Stereo).

Title

Subtitles

Title 1/1

Chapter

Chapter 2/8

Audio

Press SUBTITLE repeatedly to select different

subtitle languages.

Audio 1/1

5.1Ch Eng

(DVD)

Special VCD and SVCD Features

Subtitle

1/8 Eng

Angle

Angle 1/4

VCD2.0

Time

For VCD with Playback Control ( PBC ) feature

(version 2.0 only)

(DVD)

(VCD)

Press MENU to toggle between ' PBC On ' and '

PBC Off '.

If you select ' PBC On ', the disc menu ( if

available ) will appear on the TV.

(VCD)

00：03：33/00：05：00

Track

3/24

(VCD PBC OFF)

Use the number buttons ( 0-9 ) to select a play

option.

Time

Press PREV

or next track.

When PREV

/ NEXT

to go to the previous

(VCD PBC ON)

Time

00：03：33/00：05：00

PBC On

is pressed after the 5 seconds

Title/Chapter/Track/Time selection

of playback, playback will start from the beginning of

the current track. If you press the button within the 5

seconds, playback will start from the beginning of the

preceding track.

Press T-SEARCH, then press / to select

{ Time }, { Title }, { Chapter } or { Track }.

For VCD：

PBC OFF

Track

During playback, pressing RETURN will return to

the menu screen (if PBC is on).

---

Time

--:--:--

If you want to skip the index menu and playback

directly from the beginning.

(desired time of the current track)

(desired time of the disc)

Disc Time

For DVD:

Title

Press MENU on the remote control to turn the PBC

off.

---

Chapter

Time

--:--:--

(desired time of the disc)

Helpful hint：The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the discs.

ꢀꢄ

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback Feature

Select Add To Program in the toolkit then press

OK. ' √ ' will disappear from screen. It means that the

ﬁles/tracks you have selected already added into the

Program View list.

Playing MP3/JPEG/ Kodak picture CD

Select Program View in the toolkit then press OK to

open the ﬁle/track in the Program View list that you

already selected in step B.

IMPORTANT!

You have to turn on your TV and set to

the correct Video In channel. (See page

11, ‘ Finding your viewing channel ‘ ).

Press PLAY / PAUSE

to playback all ﬁles/tracks

in the Program View list.

General Operation

Load a disc.

Filter

The disc reading time may exceed 30 seconds

due to the complexity of the directory/ﬁle

conﬁguration.

The data disc menu and ID3 (MP3) information

(including at least title, singer and album) appears

on the TV screen.

The Toolkit has the following play mode items:

 Filter ( Audio/Photo/Video ): Sets ﬁle ﬁlters

(Filter is not applicable to Audio CD.)

 Repeat (Off/Single/ All):

Filter

Off:

Resumes normal playback

Single: Repeats the current track/ﬁle.

All:

Repeats all ﬁles on the current folder or all

tracks on the disc.

 Mode(Normal/Random)

This mode can also be toggled by using RANDOM

button.

Normal: Resumes normal playback

Random: Playbacks track/ﬁle in random order.

During MP3/CD-DA/JPEG ﬁles playback;

- If Repeat All(or Repeat Off) and Random are

selected, all the tracks will be played randomly and

endlessly.

Press  /  to select the folder and press OK to

open the folder.

Press  /  to select a track/ﬁle.

Press OK to conﬁrm.

Tips:

- If you highlight on a jpeg ﬁle, a preview will appear.

- During MP3 playback, the LED will display the track

number.

- During JPEG playback, the LED will display the ﬁle

number.

- If Random is selected, Repeat Single cannot be

selected and vice versa.

 Edit Mode: Program operation works only when

Edit Mode is selected. After ﬁnished storing the ﬁles/

tracks you want into the Program View list, select

“Edit Mode” again and press OK to release edit

mode.

 Program View: To view tracks/ﬁles in the

Program View list. It is disabled if the Program View

list is empty.

 Add To Program: Add ﬁles/tracks to the Program

View list. It is disabled if Edit Mode is not selected.

(The maximum number of ﬁles/tracks can be added

is 30.)

 Browser View: To view ﬁles/tracks in the Original

View list.

Playback Selection

During playback, you can;

 Press PREV

/ NEXT

to select the

previous/next track/ﬁle in the current folder.

 Press PLAY/PAUSE

resume playback.

For MP3

repeatedly to pause/

 Within the 5 seconds, press PREV

back to the previous track.

to go

After the 5 seconds of playback, press PREV

to go back to the beginning of current track.

 During playback, press

forward or fast reverse with the required speed: X2,

X8, X30, X100.

to access fast

 Clear Program: Delete the ﬁles/tracks in the

Program View list.

Select a ﬁle/track or more you want to delete in

Play modes for MP3/Audio CD/JPEG

stop mode.' √ ' will appear besides the deleted ﬁle/

track.Select Clear Program and then press OK . It is

disabled if Edit mode is not selected.

You are able to modify the play modes through the

toolkit which appears on the right of below picture

on the screen. Press  /  to navigate between the

windows and  /  buttons to select ﬁles/ tracks or

play mode items. Then press OK . Please refer to

below steps to playback ﬁles /tracks in the Program

View list:

Select Edit Mode in the toolkit then press OK to

start edit mode.

Select a ﬁle/track or more ﬁles/tracks you want in the

original view list.

Preview ( JPEG)

During playback, press TITLE to view a page of 9

thumbnail images.

 Use  /  /  /  to select an image.

Press OK to view the selected image in full-screen

and subsequent images will be displayed one after

another automatically. See page 18 for JPEG Interval

setting.

Helpful hint：The operating features described here might not be possible for certain discs.

Always refer to the instructions supplied with the discs.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀꢁ

Playback Feature/DVD Menu Options

 Press PREV

or next thumbnail screen.

/ NEXT

to view the previous

-Some DVD video discs allow you to change subtitle

selections only via the disc menu. If this is the case,

press the MENU button and choose the appropriate

subtitle language from the selection on the disc

menu.

-Some DVD video discs may not be played in a

different audio language that you selected. A prior

language may be programmed on the disc.

-Some DVD discs may not include your pre-selected

language . In this case, the DVD player

Zoom picture ( JPEG)

 During playback, press ZOOM repeatedly to

display the picture with different scales.

 Use  /  /  /  to view the zoomed picture.

Rotate picture (JPEG)

 During playback, press  /  /  /  to rotate the

picture on the TV screen.

 / ：ﬂip the picture vertically by 180º

：rotate the picture anti-clockwise by 90º

：rotate the picture clockwise by 90º

Tip:

-It may not be possible to play certain MP3/JPEG

disc due to the conﬁguration and characteristics of

the disc or condition of the recording.

automatically displays discs menus consistent with

the disc’s initial language setting.

Using the Video setup menu

Press SETUP on the remote control.

The system setup menu appears.

This DVD Player setup is carried out via the TV,

enabling you to customise the DVD player to suit

your particular requirement.

Language

4:3

Aspect Ratio

View Mode

Video Out

: 4:3

:Auto Fit

:Component

:Standard

Video

Audio

Smart Picture

JPEG Interval

:5 Seconds

Using the Language setup menu

Rating

Misc

Press SETUP on the remote control.

 The system setup menu appears.

OSD language

Subtitle

:English

:Off

Language

Press  /  to select { Video }, then press 

Press  /  to select an item, then press  to

access.

Video

Audio

English

DVD Menu

English

Audio

Example: { Video Out }

Rating

Misc

The options for the selected item appears.

If the selection in the menu is greyed out, that

means the feature is not available or not possible to

change at the current state.

Use  /  to select a setting and press OK to

conﬁrm.

Press  /  to select {Language }, then press .

Press  /  to select an item, then press  to

access.

Example: { OSD language }

Example: { P-Scan }

The options for the selected item appears.

The setting is selected and setup is completed.

To exit, press SETUP.

If the selection in the menu is greyed out, that

means the feature is not available or not possible to

change at the current state.

Aspect Ratio

The picture shape can be adjusted to ﬁt your TV and

the format must be available on the playback disc.

Otherwise, the TV display will not affect the picture

during playback.

In ' Video ', press  /  to select {Aspect Ratio },

then press .

Use / to select a setting and press OK to

conﬁrm.

Example: { English }

The setting is selected and setup is completed.

To exit, press SETUP.

OSD Language

This menu contains various language options for the

language displayed on the screen.

{ 4:3 }

Select this if you have a normal TV. A 'wide-screen'

source display with black bars on the top and bottom

will be displayed on the TV screen.

{ 16:9 }

Subtitle/Audio/DVD Menu

These menus contain various language options

for subtitle, audio and DVD menu which may be

recorded on the DVD.

Select this for wide-screen TV (frame ratio 16:9).

Use  /  to select a setting and press OK to

conﬁrm.

Tips:

View Mode

Use view mode to scale an image that ﬁts to the TV

screen's width and height.

In ' Video ', press  /  to select { View Mode },

then press .

-Some DVD video discs may be set to display

subtitles in a different language other than

you selected. A prior subtitle language may be

programmed on the disc.

Helpful hint: Press  to go back to previous menu item.

Press SETUP to exit the menu item.

ꢀꢅ

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Menu Options

{ Fill }

Brightness

Fill the screen with decoded image.

{ Original }

Contrast

Tint

Display image as its original size.

Color

{ Height Fit }

Fit the screen height with image height.

{ Width Fit }

Press  /  to highlight one of the following options.

Brightness

Increase the value to brighten the picture or vice

versa. Choose zero (0) for average setting.

Contrast

Increase the value to sharpen the picture or vice

versa. Choose zero (0) to balance the contrast.

Tint

Fit the screen width with image width.

{ Auto Fit }

Automatically display the decoded image on screen

at a suitable size.

{ Pan Scan }

Automatically display decoded image on full screen

Increase the value to darken the picture or vice

versa. Choose zero (0) for average setting.

Color

Increase the value to enhance the color in your

picture or vice versa. Choose zero (0) to balance the

color.

Press  /  to adjust the setting that best suits

your personal preference.

Repeat steps D~ E to adjust your picture

preference.

without distortion.

Use  /  to select a setting and press OK to

conﬁrm.

Tip:

-Depending on the type of disc, you may not be able

to view the mode as selected.

Video Out

The video output of the DVD player can be selected

as “ Component “ or “ P-Scan”.

In ＇Video＇, press  /  to select { Video Out },

then press .

{ Component }

Select this for Video(CVBS) or component video

connection.

Press  /  to select ＇Close＇ and press OK to

conﬁrm.

JPEG Interval

You can continuously playback all JPEG ﬁles

automatically. Set “JPEG Interval” to “5 Seconds”,

“10 Seconds” or “15 Seconds”.

In ' Video ', press  /  to select { JPEG Interval },

then press .

{ P-Scan }

Select this when you connect your DVD player to

your TV, which has component video inputs that

supports progressive scan.

Use  /  to select a setting and press OK to

conﬁrm.

{ Off }

Plays back one ﬁle at a time.

 If the progressive scan feature is activated but

the connected TV does not support progressive

scan, press number button “1” with the disc tray

opened to set the video output of the DVD player to

“Component”.

{ 5 Seconds }

Plays back images in the form of a slide show at 5

seconds intervals.

{ 10 Seconds }

Plays back images in the form of a slide show at 10

seconds intervals

Smart Picture

{ 15 Seconds }

Plays back images in the form of a slide show at 15

seconds intervals

Use  /  to select a setting and press OK to

conﬁrm.

This DVD player provides four predeﬁned sets of

picture color settings.

In ' Video ', press  /  to select {Smart Picture },

then press .

{ Standard }

Select this for a preset standard picture setting.

{ Vivid }

Using the Audio setup menu

Select this to make the picture brighter.

{ Cool }

Press SETUP on the remote control.

Select this to make the picture softer.

The system setup menu appears.

{ Personal }

Select this to personalize your picture color by

adjusting the brightness, contrast, tint and color

Digital Output

: All

:Off

: On

:Off

Language

Night Mode

Down Sampling

Video

3D Effects

(saturation).

Use  /  to select a setting and press OK to

conﬁrm.

Audio

Rating

If you select { Personal }, then proceed to steps

Misc

D~G.

The setup menu appears.

Press  /  to select { Audio }, then press .

Press  /  to select an item, then press  to

access.

Helpful hint: Press  to go back to previous menu item.

Press SETUP to exit the menu item.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢀꢆ

DVD Menu Options

is down sampled to 48 KHz.

Example: { Night Mode }

Use  /  to select a setting and press OK to

conﬁrm.

Tip:

- When playing back disc with copyright protection,

the sound will be down sampled to 48 KHz even

when you select Down Sampling off.

The options for the selected item appears.

If the selection in the menu is greyed out, that

means the feature is not available or not possible to

change at the current state.

Use  /  to select a setting and press OK to

conﬁrm.

Example: { On }

3D Effects

The setting is selected and setup is completed.

To exit, press SETUP.

To obtain expansive virtual surround sound effects

from two speakers, set 3D Effects to on. This

enhancement sounds only output from the Analog

AUDIO OUT (L / R) jacks of the DVD player.

In 'Audio', press  /  to select { 3D Effects }, then

press .You can set to { Off } or { On }.

Use  /  to select a setting and press OK to

conﬁrm.

Digital Output

Select this if you connect to a multichannel decoder/

receiver.

In 'Audio', press  /  to select { Digital Output },

then press .

{ Off }

Tip:

To deactivate the digital audio output. For example, if

you use the AUDIO OUT jacks to connect to a TV or

stereo system.

- Only effective in playback of a DVD Video disc with

Dolby Digital 5.1 bitstream.

{ PCM }

Select this if the connected device is not capable of

decoding multichannel audio. The DVD player will

convert the Dolby Digital signal to PCM (Pulse Code

Modulation).

Using the Rating setup menu

Press SETUP on the remote control.

{ All }

The system setup menu appears.

Select this if the connected device has a built-in

multichannel decoder that supports one of the

multichannel audio format (Dolby Digital, DTS).

Use  /  to select a setting and press OK to

conﬁrm.

Parental control

: 8.Adult

Language

Video

Set Password

Audio

Rating

Tip:

-When playing MPEG, MP3 and set Digital Output to

{All}, the player will output PCM signals.

Misc

Press  /  to select {Rating }, then press .

Press  /  to select an item, then press  to

access.

Night Mode

This mode optimizes playback of sound at low

volume. High volume outputs will be softened and

low volume outputs are brought upward to an audible

level.

In ＇ Audio＇, press  /  to select { Night Mode },

then press .

Example: { Parental control }

The options for the selected item appears.

If the selection in the menu is greyed out, that

means the feature is not available or not possible to

change at the current state.

Use  /  to select a setting and press OK to

conﬁrm.

{ Off }

Turns off night mode feature. Select this to enjoy the

surround sound with its full dynamic range.

{ On }

Select this to set low volume output. This feature

is only available for movie discs with Dolby Digital

Example: { 8. Adult }

The setting is selected and setup is completed.

To exit, press SETUP.

mode.

Rating Level settings

Use  /  to select a setting and press OK to

Depending on the DVD, you may be asked to

change the parental level while playing the disc. The

rating levels are from 1 to 8 and are country

dependent. You can prohibit the playing of certain

discs that are not suitable for your children, or have

certain discs played with alternative scenes.

In ' Rating ', press  /  to select {Parental control },

then press .

conﬁrm.

Down Sampling

You can enable and disable the digital signal for

better sound output quality.

In ＇Audio＇, press  /  to select { Down

Sampling }, then press .

{ Off }

If your ampliﬁer / decoder is compatible with 96 KHz

PCM, select “ Off “ . Sound is sampled at 96 KHz.

{ On }

If your ampliﬁer / decoder is not compatible with 96

KHz PCM, select “ On “ . Sound recorded at 96 KHz

Use the number buttons to enter the four-digit

password, then press OK.(See ‘Changing the

Password’ on page 20.)

Press OK again to list the parental level.

{ 1.Kid Safe }

Suitable for children.

Helpful hint: Press  to go back to previous menu item.

Press SETUP to exit the menu item.

ꢀꢇ

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Menu Options

{ 2. G }

General Audience; recommended as acceptable for

viewers of all ages.

{ 3. PG }

Using the Misc (Miscellaneous) setup

Parental Guidance suggested.

{ 4. PG-13 }

Unsuitable for children under 13.

{ 5. PG-R }

Restoring to original settings

Setting the { Use Default Settings } function will reset

all options and your personal settings to the factory

defaults, except your password and rating level.

Parental Guidance Recommended.

{ 6. R }

Restricted; under 17 requires accompanying parent

or adult guardian.

{ 7. NC-17 }

No one under 17 admitted.

{ 8. Adult }

Press SETUP on the remote control.

 The system setup menu appears.

Use Default Settings

Language

Video

DVD softwares of any grades (adult/general/children)

can be played back. Should be viewed only by adults

due to graphic sexual material, violence or language.

Use  /  to select a rating level and press OK to

conﬁrm.

Audio

Rating

Misc

Press  /  to select { Misc }, then press .

{ Use Default Settings } will be highlighted, then

press OK.

Select { 8. Adult } to disable parental level and

allow all discs to play.

DVDs that are rated higher than the level you

selected will not play unless you enter your four-digit

password.

The menu will appear.

Use Default Settings

Tips:

-This feature will not limit viewing if the disc

manufacturer did not code the disc.

-VCD, SVCD, CD have no level indication, so

parental control has no effect on these type of discs.

This also applies to most illegal DVDs.

-Some DVDs are not coded with a rating though the

movie rating may be printed on the disc cover. The

rating level feature does not prohibit play of such

discs.

Yes

{ Yes }

Select this to reset to factory default settings.

{ No }

Select this to close the menu.

Use  /  to select a setting and press OK to

conﬁrm.

To exit, press SETUP.

Changing the Password

You need to enter your four-digit password to play a

prohibited disc or if prompted for a password.

In 'Rating', press  /  to select {Set Password },

then press OK.

Tray Lock

Press SETUP button, then press the number button

"2006" in sequence to lock the tray.

 All functionality of the player and playback remain

the same except for the OPEN/CLOSE button.

 After the tray is locked, "Tray Lock Is On" will

appear on the screen when OPEN/CLOSE is

pressed.

You will be prompted to enter your four-digit

password.

Enter Password

Use the number buttons ( 0-9 ) to enter the four-digit

password, then press OK.

 To unlock the tray, just follow the same procedure

as above.

When doing this for the ﬁrst time, enter the default

password ＇0000 ＇.

 If you forget your old four-digit password, enter the

default password ＇ 0000＇.

Press OK again to enter the new four-digit password.

The new four-digit password will now take effect.

Enter New Password

Press OK to conﬁrm.

Helpful hint: Press  to go back to previous menu item.

Press SETUP to exit the menu item.

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢁ0

Speciﬁcations

DVD Player/Outputs/Supplied Accessories

DVD Player

Power supply

120 V AC, 60 Hz

Power Consumption

6W ( standby :<1W )

Net weight

1.45 kg

External dismensions

Signal System

Laser

430 X 43 X 209 mm (W/H/D)

Standard NTSC

Semiconductor laser, wavelength 657/790 nm

Frequency range

DVD linear sound : 48 kHz sampling 4 Hz to 22 kHz

96 kHz sampling 4 Hz to 44 kHz

Signal-to-noise ratio

Audio dynamic range

Harmonic distortion

Wow and ﬂutter

More than 90 dB

More than 80 dB

Less than -65 dB

Below measurable level [less than ＋ 0.001 % ( W.PEAK )]

Operating conditions

Temperature : 5 C to 35 C Operation status :Horizontal

Outputs

Video output

1.0 V ( p-p ) , 75 Ω, pin jack x 1

Component video output

(Y) 1.0 V (p-p), 75 Ω, pin jack x 1

(P B)/(P R) 700 mV (p-p), 75 Ω, pin jack x 2

Audio output (COAXIAL DIGITAL)

Audio output (ANALOG)

0.5 V (p-p) 75 Ω pin jack x 1

2.0 V (rms), 10K Ω, pin jacks (L/R) x 1

Supplied Accessories

Audio/Video cable

Remote control(SE-R0301)

Batteries(AAA)

The model complies with the above speciﬁcations.

Designs and speciﬁcations are subject to change without notice.

This model may not be compatible with features and /or speciﬁcations that may be added in the future.

ꢁꢀ

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting

WARNING

Under no circumstances should you try to repair the DVD player yourself, as this will invalidate the

warranty. Do not open the DVD player as there is a risk of electric shock.

If a fault occurs, ﬁrst check the points listed below before taking the DVD player for repair. If you are unable

to remedy a problem by following these guides, consult your dealer or TOSHIBA for help.

Problem

No power

Solution

-Check if theAC power cord is properly connected.

-Press the I/2ON/STANDBY on the front of the DVD player

to turn on the power.

-Refer to your TV' s manual for correct Video In channel

selection. Change the TV channel until you see the DVD

screen.

No picture

-Check if the TV is switched on.

-If the progressive scan feature is activated but the connected

TV does not support progressive signals or the cables are

not connected accordingly. See pages 11-12 for proper

progressive scan set up or deactivate the progressive scan

feature as follow:

1) Press OPEN/CLOSE on the DVD Player.

2) When the disc tray is opened, press number button＇1＇on

the remote control for a few seconds.

Distorted picture

Picture clipped

-Sometimes a small amount of picture distortion may

appear depending on the disc being played back. This is not

malfunction.

-May be caused by View Mode Setting (see page 18). Set to

Original for normal viewing.

-Connect DVD Player directly to the TV.

Completely distorted picture or

black /white picture with DVD.

-Make sure the disc is compatible with the DVD player.

-Ensure that the DVD Player's setting is set to match that of

the disc and your TV.

-Adjust the volume.

-Check that the speakers are connected correctly.

No sound / distorted sound

No audio at digital output

-Check the digital connections.

-Check if your receiver can decode MPEG-2 or DTS and if not,

please make sure the digital output is set to PCM.

-Check if the audio format of the selected audio language

matches your receiver capabilities.

-Check that the cable is connected to the correct device (See

Connecting to television).

No sound and picture

Disc cannot be played

-The DVD⁺R/RW must be ﬁnalized and in video mode

format.

-Ensure the disc label is facing up.

-Check if the disc is defective by trying another disc.

-Wrong region code.

Picture freezes momentarily during playback

-Check the disc for ﬁngerprint/scratches and clean with a soft

cloth wiping from centre to edge.

No return to start-up screen when disc is removed

The player does not respond to the Remote Control

-Reset the unit by switching the player off, then on again.

-Aim the Remote Control directly at the sensor on the front of

the player.

-Reduce the distance to the player.

-Replace the batteries in Remote Control.

-Re-insert the batteries with their polarities(+/- signs)as

indicated.

-To completely reset the player, unplug theAC cord fromAC

outlet for 5-10 seconds.

Buttons do not work

Download from Www.Somanuals.com. All Manuals Search And Download.

ꢁꢁ

Troubleshooting

Problem

Solution

Player does not respond to some operating

commands during playback.

-Operations may not be permitted by the disc.

Refer to the instructions of the disc jacket.

DVD Player cannot read CDs /DVDs

Menu items cannot be selected

-Use a commonly available cleaning CD/DVD to clean

the lens before sending the DVD Player for repair.

-Press STOP twice before selecting system setup

menu.

-Depending on the disc availability,some menu items

cannot be selected.

Unable to select Progressive Scan on/off

-Ensure that the output of the Video Out signal is

switch to P-Scan/Component.

ꢁꢂ

Download from Www.Somanuals.com. All Manuals Search And Download.

Glossary

Analog audio:

Progressive scan:

Dolby Digital:

An electrical signal that directly

represents sound. In contrast,

digital audio can also be an electrical

signal, but is an indirect

representation of sound. See also

Digital audio.

It displays all the horizontal lines

of a picture at one time, as a signal

frame. This system can convert

the interlaced video from DVD into

progressive format for connection to

a progressive display. It dramatically

increases the vertical resolution.

A system developed by Dolby

Laboratories that compresses

digital sound. It works with stereo

(2ch) or multi-channel audio.

DTS :

(Digital Theater System)

Aspect ratio:

DTS is a Multi-channel surround

Region code:

The width of a TV screen relative to

it is height. Conventional TVs are 4:3

(i.e., the screen is almost square).

Widescreen models are 16:9 (the

screen is almost twice as wide as its

height)

sound system, but it is different from

Dolby Digital. DTS format was devel-

oped by Digital Theater Systems, Inc.

Regions associate discs and

players with particular areas of the

world. This unit will only play back

JPEG:

discs that have compatible region

codes. You can ﬁnd the region code

of your unit by looking on the rear

panel. Some discs are compatible

with more than one region (or all

regions).

(Joint Photographic Experts Group)

JPEG is a method of compressing

still image ﬁles. You can copy JPEG

ﬁles on CD-RW / R or DVD+R / R

discs from a computer and play back

the ﬁles on this unit.

AUDIO OUT jacks:

Jacks on the back of the DVD System

that send audio to another system (TV,

Stereo, etc.)

Sampling frequency:

Bit rate:

MP3:

The rate at which sound is

The amount of data used to hold a

given length of music; measured in

kilobits per seconds, or kbps. Or, the

speed at which you record.Generally,

the higher the bit rate, or the higher the

recording speed, the better the sound

quality. However, higher bit rates use

more space on a disc.

(MPEG Audio Layer 3)

measured by a speciﬁed interval to

turn it into digital audio data. The

number of samples in one second is

deﬁned as the sampling frequency.

The higher the rate is, the better the

possible sound quality.

MP3 is a method of compressing

ﬁles. You can copy MP3 ﬁles on

CD-RW / R or DVD+R / RW discs from

a computer and play back the ﬁles on

this unit.

Multichannel:

Title:

DVD is speciﬁed to have each sound

track constitute one sound ﬁeld. Multi-

channel refers to a structure of sound

tracks having three or more channels.

Chapter:

(DVD)

A collection of chapters on a DVD.