,
OWNER S MANUAL
2.4GHz DIGITAL SPREAD SPECTRUM CORDLESS TELEPHONE
-
SG 1801
The FIRST thing to do after unpacking your new
cordless telephone is:
CHARGE THE BATTERY !
Please read and follow the few instructions on
PAGE 2
BEFORE YOU DO ANYTHING ELSE.
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
FEATURES
Toshiba America Consumer Products, Inc., takes pride in presenting
the new 2.4 GHz digital spread spectrum cordless telephone. The
Toshiba cordless telephone features a 16-digit x 3-line dot matrix liquid
crystal display (LCD) for caller ID on Call Waiting and speed-dial
programming and calling. The sleek new design provides face-up
battery charging even when wall mounted. Other features are
summarized below.
•2.4 GHz Digital Spread Spectrum
Transmission with Extended Talk
Range
•35 Channel Auto Scanning
•50 Name & Number Caller ID
•Caller ID on Call Waiting
•Call Waiting Options
•Digital Call Protect Privacy
Scrambling and Digital Security
Code
•Digital Security Code (about 65,000)
•20 Speed Dial (20 digits each)
•Long Standby Battery Life (10 days)
•One Way Page/Handset Locator
•3-Number Redial (32 digits)
•Any-Key Answer
•Reversible Charging System
•Hearing Aid Compatible/HAC
Volume
•Desk/Wall Mountable (Bracket
included)
•Headset Jack
•Backlit 3-Line Alphanumeric LCD
Display
•Volume Control (4 Level)
•Ringer Volume and Tone Control
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Preparation
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . .6
LOCATION OF CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Base unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Setting up the base unit (Desk top mounting) . . . . . . . . . . . . . . . . . .10
AC adaptor information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Setting up the base unit (Wall mounting) . . . . . . . . . . . . . . . . . . . . .11
Charging the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Setting the tone/pulse switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Setting or canceling the Auto Talk function . . . . . . . . . . . . . . . . . . . .15
Setting or canceling caller ID on call waiting . . . . . . . . . . . . . . . . . . .15
Setting the area code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Using the headset and belt clip (option) . . . . . . . . . . . . . . . . . . . . . .17
Basics
BASIC OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Receiving a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
3-number redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Out of range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Handset earpiece volume setting . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Handset ringer volume setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Ringer off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Tone/Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Interference or static . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Paging the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
MEMORY DIALING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Storing numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Steps for entering names and special characters . . . . . . . . . . . . . . .24
If you make a mistake while entering a name . . . . . . . . . . . . . . . . . .25
Dialing a stored number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Editing and deleting stored numbers . . . . . . . . . . . . . . . . . . . . . . . .26
Caller ID/Call waiting
CALLER ID/CALL WAITING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Answering a call with caller ID service . . . . . . . . . . . . . . . . . . . . . . .28
Searching caller ID memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Calling back from the caller ID list . . . . . . . . . . . . . . . . . . . . . . . . . .29
Editing caller ID data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Transfering CID number to speed-dial memory . . . . . . . . . . . . . . . . .30
Deleting caller ID data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Call waiting options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Additional Information
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
WARRANTY/SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
WALL MOUNT TEMPLATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment,
9 Never push objects of any kind into
this product through cabinet slots as
they may touch dangerous voltage
points or short out parts that could
result in a risk of fire or electric shock.
Never spill liquid of any kind on the
product.
basic safety precautions should always
be followed to reduce the risk of fire,
electric shock and injury.
1 Read and understand all instructions.
2 Follow all warnings and instructions
marked on the product.
10 Do not disassemble this product.
Opening or removing covers puts you
at risk of electrical shock, and incorrect
reassembly can cause shocks, sparks
or other damage during subsequent
use.
3 Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Use a dry cloth for cleaning.
4 Do not use this product near water
sources, such as bath tubs, wash
bowls, kitchen sinks, laundry tubs, wet
basements, or swimming pools.
11 Take this product to a qualified service
technician under any of the following
conditions:
5 Do not place this product on an
unstable cart, stand, or table. The
telephone may fall, causing serious
damage to the telephone.
A. When the power supply cord is
damaged or frayed.
B. If liquid has been spilled into the
product.
6 Slots and openings in the cabinet and
the back or bottom are provided for
ventilation. To protect it from
C. If the product has been exposed to
rain or water.
D. If the product does not operate
normally according to the operating
instructions. Adjust only those
controls covered by this manual.
Improper adjustment of other
controls may result in serious
damage to the unit or your home.
E. If the product has been dropped or
the cabinet has been damaged.
F. If the product exhibits a distinct
change in performance.
overheating, these openings must not
be blocked or covered. The openings
should never be blocked by placing
the product on a bed, sofa, rug, or
other similar surface. This product
should never be placed near or over a
radiator or heat register. This product
should not be placed in a built-in
installation unless proper ventilation is
provided.
7 Do not allow anything to rest on the
power cord. Do not locate this product
where the cord can be stepped on or
tripped over.
12 Do not use the telephone in the
vicinity of a gas leak.
8 Do not overload wall outlets and
extension cords as this can result in
the risk of fire or electric shock.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
The RBRCTM Seal
The RBRCTM Seal on the (easily removable) nickel-cadmium battery
(contained in our product) indicates that Toshiba America Consumer
Products, Inc. (TACP) is voluntarily participating in an industry program
to collect and recycle these batteries at the end of their useful lives,
when taken out of service within the United States. The RBRCTM
program provides a convenient alternative to placing used nickel-
cadmium batteries into the trash or municipal waste, which is illegal in some areas.
TACP’s payments to RBRCTM make it easy for you to drop off the spent battery at
local retailers of replacement nickel-cadmium batteries, or at authorized TACP product
service centers. You may also contact your local recycling center for information on
where to return the spent battery. Please call 1-800-8-BATTER for information on Ni-
Cd battery recycling in your area. TACP’s involvement in this program is part of its
commitment to protecting our environment and conserving natural resources.
RBRCTM is a trademark of Rechargeable Battery Recycling Corporation.
CAUTION: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS BY THE
BATTERY, READ AND FOLLOW THESE INSTRUCTIONS.
4 Exercise care in handling the
batteries. Contact with conductive
materials such as rings, bracelets and
BATTERIES
keys may cause the battery to short
out, resulting in overheating which
could burn.
1 Use only the appropriate type and
size battery pack specified in the
instruction manual provided for this
5 Charge the battery pack provided with
or identified for use with this product
only in accordance with the
product.
2 Do not dispose of the battery pack in
a fire. The cell may explode. Check
with State and local codes for
instructions and limitations specified
in the instruction manual provided for
this product.
possible special disposal instructions.
3 Do not open or mutilate the battery
pack. Released electrolytes are
corrosive and may cause damage to
the eyes or skin. It may be toxic if
swallowed.
6 Observe proper polarity orientation
between the battery pack and the
battery charger.
ATTENTION: THE PRODUCT THAT YOU HAVE PURCHASED CONTAINS A
RECHARGEABLE BATTERY. UNDER VARIOUS STATE AND LOCAL LAWS, IT MAY
BE ILLEGAL TO DISPOSE OF THIS BATTERY INTO THE MUNICIPAL WASTE
STREAM. PLEASE CHECK WITH YOUR LOCAL GOVERNMENT FOR DETAILS IN
YOUR AREA REGARDING RECYCLING OPTIONS OR PROPER DISPOSAL.
SAVE THESE INSTRUCTIONS
TO HELP PROTECT THE ENVIRONMENT, THIS PRODUCT MAY CONTAIN
RECYCLED OR RECONDITIONED PARTS AND MATERIALS.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
HANDSET
Antenna
VOL (VOLUME/RINGERL) button
Headset jack
(Up arrow button)
(VOLUME/RINGERM) button
(Down arrow button) (page 19)
VOL
CID
MEM
(Memory) button (page 22)
(Caller ID) button (page 28 to 32
)
TALK
L.D./1
button (page 18)
CID
button (page 30)
FLASH
button (page 32)
LOCAL
L.D.
button (page 30)
LOCAL/3
TONE/
(TONE) button (page 20)
(
) button (Left arrow button)
#
(
) button (Right arrow button)
(page 22 to 26)
(page 22 to 26)
TONE
RDL/P (Redial/Pause) button
RDL/P FUNCTION
SELECT
DELETE
(page 19)
DELETE
button (page 25 to 27, 31 to 32)
SELECT button (page 22 to 27, 32 to 33)
FUNCTION button (page 15 to 16, 33)
CHANNEL button (page 20)
SUPPLIED ACCESSORIES:
Modular Line Cord
Part # RC008231
Wall Mount Bracket
Part #.RC009262
AC Adaptor
TAC-2981
Part # RC009792
8
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
BASE UNIT
DC IN 9V jack (page 10)
LINE modular jack (page 10)
Tone/Pulse switch (page 14)
Hook
IN USE/CHARGE LED
PAGE
button (page 21)
Antenna
Charging contacts
For purchase of accessories, please call 1-877-644-7373.
Owner’s manual
Part # RC009816
Quick Reference Guide
Part # RC009817
Rechargeable Battery Pack
Toshiba TRB-1981
Part # RC009814
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
SETTING UP THE BASE UNIT (DESK TOP MOUNTING)
For setting up the base unit follow the instructions below.
Snap the bracket’s tab into the notches on the base.
Fasten the AC adaptor
cord to prevent it from
being disconnected.
Raise the
antenna to
vertical
position.
Single-Line
Telephone Jack
Telephone Line Cord
(RJ11C)
Power Outlet
(AC 120 V, 60 Hz)
AC Adaptor
• Plug the AC adaptor firmly into the base unit and the AC 120V outlet.
• USE ONLY WITH Supplied AC ADAPTOR (TAC-2981 power source
AC 120V 60Hz/DC9V).
• Connect the AC adaptor to a continuous power supply.
AC ADAPTOR INFORMATION
Use only the supplied AC adaptor, or
one matching its specifications exactly
with this product. Incorrect voltage may
damage the unit or cause it to function
improperly.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
SETTING UP THE BASE UNIT (WALL MOUNTING)
MOUNTING ON A STANDARD WALL PLATE:
Insert the bracket’s tabs into the base’s lower
tab slots, then press down on the top of the
bracket to snap it into the clip slots.
Flip the hook tab over
so the tab holds the
handset.
Raise the antenna.
Single-Line
Telephone Jack
(RJ11C)
Power Outlet
(AC 120 V, 60 Hz)
• Route the cords through the guides.
• Place the base unit on the posts of the
AC Adaptor
wall plate and push down until it is firmly seated.
NOTES:
• Do not use any outlet controlled by a wall switch.
• If you don’t have a standard wall plate, cut out the template on this page and
use it to position two screws (minimum length of 13/8 inches) into the wall
with the heads protruding about 1/4 inch.
CUT
CUT
Wall mount template
IMPORTANT:
• Before mounting, select a wall area of sufficient
strength. If mounting on wallboard or in an area
of questionable strength, locate a stud for
maximum support of your telephone.
• Avoid electrical cables, pipes, or other items
behind the mounting location that could cause a
hazard.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
CHARGING THE BATTERY PACK
It is important to charge the battery for 12-16 hours continuously
without any interruption before you use the handset for the first
time.
Black
Red
1
2
Remove the battery cover on the
back of the handset by sliding it
down.
Plug the battery pack cord into the
connector with the correct polarity.
(black and red wires).
3
4
Place the battery pack in the battery
compartment.
Put the battery cover back by
sliding until it snaps into place.
Make sure not to get the wires of
the battery pack caught in the
cover.
5
Place the handset on the base unit.
Be sure the IN USE/CHARGE LED
lights.
If the IN USE/CHARGE LED does
not light, make sure the AC adaptor
is plugged in securely.
IN USE/
CHARGE
LED
Charging contacts
NOTES:
• Use only the supplied battery pack (TRB-1981 power source 800mAh, 3.6VDC)
• The battery pack is not charged properly if the charging contacts are dirty or
tarnished. Clean the contacts occasionally with a dry cloth.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
After the battery pack is fully charged;
Operation
Approx. battery life
up to 6 hours
While in use (Talk mode)
While not in use (Standby mode)
up to 10 days
When "Low Battery" blinks on the LCD, all handset buttons except
TALK
are disabled and the battery needs to be charged. If this occurs
during a call, you hear short beeps. Finish the call as soon as possible
and place the handset on the base unit.
Low Battery
NOTES:
• If a call comes in when the battery is too low to operate properly, you will be
unable to answer the call or the call will be disconnected.
• The redial memory numbers backup for up to 2 minutes while you replace
the battery pack.
• If you must replace the battery pack during a telephone call, complete the
replacement of the battery pack within 30 seconds, and you can return to the
original call.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Before using the Handset, make sure to read the following instructions.
VOL
(
(
)
)
VOL
SELECT/CHANNEL
FUNCTION
SETTING THE TONE/PULSE SWITCH
Set the TONE/PULSE switch to TONE.
Place a call.
If the call does not connect with the TONE setting, set the
TONE/PULSE switch to PULSE.
TONE/PULSE switch
14
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
SETTING OR CANCELING THE AUTO TALK FUNCTION
If the handset is placed on the base unit, you can answer a call by
lifting the handset from the base unit (Auto Talk). If the handset is not
on the base unit, you can answer a call by pressing any one of the
buttons (Any-key Answer function). When the Auto Talk function is set
to ON, the Any-key Answer function is also set to ON.
When the Auto Talk function is set to OFF, you can lift the handset and
view the caller ID information before taking the call. This function is
factory preset to OFF.
FUNCTION
1
2
3
Press
. The LCD displays the
1
s
Auto Talk:Off
2 CIDCW :On
3 Area Code:
current setting.
SELECT/CHANNEL
Press
. Each time you press
, the On/Off setting will be switched.
SELECT/CHANNEL
FUNCTION
Press
. The handset returns to
1
s
Auto Talk:On
2 CIDCW :On
3 Area Code:
standby mode.
SETTING OR CANCELING CALLER ID ON CALL WAITING
This function is preset to ON so that you will receive caller ID on Call
Waiting when you subscribe to both local telephone company services.
When you set this function to Opt, you can use seven pre-programmed
call waiting options (See page 33, “Call Waiting Options”).
If you do not subscribe to these services, be sure to set this function to
OFF.
FUNCTION
1
2
Press
. The LCD displays the
current setting.
1
s
Auto Talk:Off
2 CIDCW :On
3 Area Code:615
2
Press
or
to move the pointer to
SELECT/CHANNEL
CIDCW and press
time you press
On/Off/Opt setting will be switched.
. Each
1 Auto Talk:Off
SELECT/CHANNEL
2
s
CIDCW
:On
, the
3 Area Code:615
FUNCTION
3
Press
and replace the handset on the base unit.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
SETTING THE AREA CODE
It is necessary to program your area code so that local calls will be
displayed properly on caller ID.
1
s
Auto Talk:Off
2 CIDCW
3 Area Code:
:On
FUNCTION
1
2
3
Press
.
1 Auto Talk:Off
2 CIDCW
:On
3
Press
Code.
or
to move the pointer to Area
s
3 Area Code:
1 Auto Talk:Off
2 CIDCW :On
3 Area Code:615
SELECT/CHANNEL
Press
.
Enter your 3-digit area code. For example, enter “615.”
If you enter a wrong number, press
DELETE
.
1 Auto Talk:Off
2 CIDCW :On
Area Code:615
SELECT/CHANNEL
4
5
Press
.
3
s
Confirmation tone sounds.
FUNCTION
Press
.
The handset returns to the standby mode.
NOTES:
• Change your area code when you move to another location that has a
different area code.
• When you make a call or redial to a number within your area code, only the
last 7 digits of the phone number are dialed when you set the area code.
• During call-back, however, the phone will include the area code from where
the call originated when it automatically redials the number. To avoid this
problem, always be sure to set the area code of your phone so that the phone
will automatically exclude the area code when the incoming code is the same
as that of the phone.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
USING THE HEADSET AND BELT CLIP (OPTION)
For purchase of an optional accessory, please call 1-877-644-7373.
HEADSET
You can use an optional headset (part#: RC 008260) that has a 3/32-
inch (2.5mm) plug.
To connect the headset, open the rubber
cover on the left side of the handset, then
insert the headset's plug into the jack.
With a headset connected, you can make or
answer calls as usual using the keys on the
handset.
When you finish using the headset,
disconnect it from the handset and close the
rubber cover to protect the jack.
NOTES:
• The handset's earspeaker and microphone are turned off with a headset
connected.
VOL
• Pressing the
(L,M) button of the handset also controls the connected
headset's volume.
• If you place the handset on the base unit while the headset is connected, be
sure the handset is placed properly.
BELT CLIP
You can attach an optional Belt Clip (part # RC009263) to the handset in
order to carry it on your belt.
Attaching the Belt Clip to the Handset
Insert the Belt Clip tabs into the holes on
each side of the handset until they click.
NOTE:
Be sure to insert the tabs properly into each hole to
prevent the Belt Clip from falling off.
Removing the Belt Clip from the Handset
Pull both sides of the Belt Clip to release the tabs from the grooves.
NOTE:
Remove the Belt Clip carefully from the handset, taking care not to hurt your
fingers or damage your nails.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
Before using the Handset, make sure to read the following instructions.
(
)
VOL
FLASH
VOL (
TALK
)
TONE/
/
/
RDL/P
DELETE
MAKING A CALL
Handset On The Base
Handset Off The Base
TALK
1) Pick up the handset.
1) Press
.
TALK
2) Press
.
2) Listen for the dial tone.
3) Dial the number.
OR
3) Listen for the dial tone.
4) Dial the number.
OR
TALK
Dial the number, then press
.
1) Pick up the handset.
2) Dial the number, then press
TALK
.
TALK
To hang up: press
, or return the handset to the base (Auto Standby).
NOTE:
DELETE
To delete a wrong number, press
. To delete all the wrong numbers,
DELETE
press and hold
.
RECEIVING A CALL
Handset On The Base
Handset Off The Base
TALK
Pick up the handset (AutoTalk) or press
.
Press any button (Any-Key Answer) or press
TALK
.
TALK
To hang up: press
, or return the handset to the base (Auto Standby).
NOTE:
To use Any-key Aunswer and Auto Talk functions, set the Auto Talk to ON
(See page 15).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
3-NUMBER REDIAL
You can redial any of the last three numbers dialed from the handset:
RDL/P
1
Press
in standby mode. The last dialed number (Redial 1)
appears.
Each time you press
RDL/P
, the LCD displays one of the three last
2 dialed numbers (Redial 1 to Redial 3).
After the desired number has been selected, press
connected.
. The call will be
TALK
NOTES:
• The handset redials only up to 32 digits even for a number that exceeds this limit.
RDL/P
• When you press
after pressing
, the latest dialed number will
TALK
be dialed automatically.
OUT OF RANGE
During a call, as you begin to move too far from the base unit, the
noise increases. Then, you should move close to the base unit. If you
travel out-of-range, your call terminates.(See page 20 “Interference or
static”).
HANDSET EARPIECE VOLUME SETTING
VOL
To adjust the earpiece volume, press
(
or ) during a call.
HANDSET RINGER VOLUME SETTING
VOL
To adjust the ringer volume, press
mode.
(
or ) during standby
RINGER OFF
You can turn off the handset ringer volume.
During standby mode or when you set the ringer volume, press and
VOL
hold
(
) till “Ringer Off” appears.
Ringer Off
VOL
To resume the Ringer, press
(
or ).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
TONE/PAUSE
To
Do this
TONE/
To temporarily switch to tone dial
(When the base is set to pulse mode),
see page 14.
Press
. The following numbers will
be sent as tone dialing.
RDL/P
To enter a pause within the dialing sequence
Press
. “P” appears in the display
which represents a pause.
PAUSE
EXAMPLE : To make a call “0
12345678” with tone dialing in
0
1
2
3
4
5
6
TONE/
RDL/P
pulse mode, press
7
8
.
INTERFERENCE OR STATIC
If you hear noise during a call, press
Talk
0:15
SELECT/CHANNEL
to select another channel.
Scanning
The LCD displays “Scanning” while changing
channels.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
PAGING THE HANDSET
PAGE
1
To locate the handset while it is off the base,
Paging
PAGE
press
. The handset beeps for 60
seconds.
PAGE
To stop paging, press
or any key at the handset, or
return the handset to the base unit.
NOTES:
• You cannot page the handset during a call.
• Be careful not to get your ear too close to the ringer on the back side of the
handset while paging, as the paging tone may be too loud.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING
You can store up to 20 telephone numbers and their associated
names in the memory.
NOTES:
• Always press a button within 20 seconds or the phone will return to standby.
• If you press a wrong button, an error tone sounds and the handset returns to
standby mode.
• If you receive an incoming call or a pager call from the base unit during the
operation, the operation will be cancelled.
MEM
(
)
)
VOL
TALK
VOL (
RDL/P
DELETE
SELECT/CHANNEL
STORING NUMBERS
You can store up to 20 digits including #, , and PAUSE as a
telephone number, and up to 13 characters as a name in one memory
address.
MEM
1
2
Pick up the handset and press and hold
till a beep sounds.
Memory Store
s
01
02
Enter a two-digit number (01-20), or press
to select a free memory location number.
,
22
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING
SELECT/CHANNEL
3
4
Press
.
Store Name
To enter a name, use the number keys.
• See the steps for storing names and special characters. (see page 24)
• If a name is not required, go to step 5.
SELECT/CHANNEL
5
6
Press
.
Store Number
Enter a telephone number to be stored.
NOTES:
Store Number
1P1234567890
RDL/P
• By pressing
, you can insert a 2-second
pause in the memory dial to make a long distance
call or call through a PBX.
DELETE
• Press
to delete characters as needed.
SELECT/CHANNEL
7
8
Press
. A confirmation beep
sounds and the number is stored.
Memory01 Stored
The LCD returns to Memory Store screen. To store more names
and numbers, return to step 2.
If you do not store a name, only the memory
location <Memory01> appears.
Memory Store
01
02
s
<Memory01>
MEM
9
To finish the operation, press
the handset to the base unit.
or return
23
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING
STEPS FOR ENTERING NAMES AND SPECIAL CHARACTERS
Refer to the letters on the number buttons to select the desired letter.
Each button selects a character as shown below.
Number of times key is pressed
Keys
1
1
A
D
G
J
M
P
T
W
2
3
4
5
6
7
8
9
1
ABC
2
B
E
H
K
N
Q
U
X
#
C
F
I
L
O
R
V
Y
–
a
d
g
j
m
S
t
Z
&
b
e
h
k
n
p
u
w
(
c
f
i
l
o
q
v
x
)
2
3
4
5
6
r
8
y
DEF
3
GHI
4
JKL
5
MNO
6
PQ
RS
7
s
z
7
9
TUV
8
WX
Y Z
9
0
blank 0
For example, to enter “Ted Doe” and 1 - 1 2 3 - 4 5 6 - 7 8 9 0
MEM
1
Pick up the handset and press and hold
till a beep
2 sounds.
Enter a number or press
,
to select a free memory
3 location number.
.
SELECT/CHANNEL
4 Press
Press
once.
8
3
5
Press
five times then press
to move the cursor to
twice to enter a space.
the right.
3
3
6
6
four times then press
once.
7 Press
Press
8
Press
six times.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING
3
9
Press
five times.
SELECT/CHANNEL
11 When finished, press
Press
to be
10
.
2
3
4
5
6
7
8
9
0
1
1
12stored.
Press
.
SELECT/CHANNEL
IF YOU MAKE A MISTAKE WHILE ENTERING A NAME
Use
or
to move the cursor to the incorrect character. Press
DELETE
to erase the wrong entry, then enter the correct character. To
DELETE
delete all characters, press and hold
.
DIALING A STORED NUMBER
MEM
1
2
Pick up the handset and press
.
01 Ted Doe
s
02 DOE JOHN
03 MOM AND DAD
Press or enter a two-digit number
(01-20) to display the desired destination.
,
NOTES:
SELECT/CHANNEL
• When you press
telephone number.
, the LCD displays both the name and the
• When the stored phone number has 14 or more
digits, is displayed next to the 12th digit. Press
Ted Doe
1234567890
➡
to see the rest of the numbers, and
return.
to
3
Press TALK . The selected number will be dialed.
NOTE:
If you press
MEM
while you are selecting a location, memory selection is
cancelled and the handset returns to standby.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING
EDITING AND DELETING STORED NUMBERS
You can delete a number or simply store another one in its place.
When you store a new phone number, the data stored in that memory
location is deleted automatically.
MEM
1
2
Pick up the handset and press and hold
The confirmation tone sounds.
.
Memory Store
Ted Doe
02 DOE JOHN
01
s
Enter a two-digit number (01-20) or press
,
to select the memory location you
want to edit/delete.
s
Edit Memory01
SELECT/CHANNEL
3
4
Press
.
Delete Memory01
Go Back
Press
or
to select the desired function and press
. To edit the stored data, select “Edit
SELECT/CHANNEL
Memory.” To delete the data, select “Delete
Memory.” To return to the previous screen,
select “Go Back.”
s
Edit Memory01
Delete Memory01
Go Back
5
a
To edit data, go to step a. To delete data, go to step b.
EDITING THE NAME AND TELEPHONE NUMBER
Use the number buttons and
or
buttons to edit the
name. (See “Storing Numbers” on page 22 for instructions
on how to enter names).
DELETE
(1) Press
to erase a character at the
Store Name
Ted Doe
cursor position.
The next character on the right moves to
the cursor position.
SELECT/CHANNEL
(2) Press
.
Store Number
1234567890
DELETE
(3) Press
to erase numbers, and enter
the correct number.
SELECT/CHANNEL
(4) Press
. A confirmation tone
sounds and the number is stored. Press
Memory01 Stored
MEM
or return the handset to the base unit.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING
b
DELETING THE STORED DATA
(1) Press
select
or
or
to move the pointer to
.
Delete Memory01?
Yes
s
No
DELETE
(2) Press SELECT/CHANNEL or
.
If is selected: a confirmation tone
sounds and the number is erased.
Memory01 Deleted
Memory Store
If
is selected: the LCD returns to the
“Memory Store” display.
01
s
Ted Doe
02 DOE JOHN
MEM
(3) Press
, or return the handset to the base unit.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID/CALL WAITING
VOL
(
)
VOL
(
)
CID
TALK
FLASH
L.D./1
LOCAL/3
SELECT/CHANNEL
DELETE
FUNCTION
NOTES
• Before you can take advantage of the Caller ID and Call Waiting features, you
must subscribe to these services from your local telephone company.
• Name and number caller ID only work in conjunction with service provided by
your local telephone company.
ANSWERING A CALL WITH CALLER ID SERVICE
1
When the caller ID message is received, the display shows the
caller's phone number along with the date and time. The incoming
call information is stored in the Caller ID record.
If the Caller ID service includes the caller's name, the caller's name
appears on the display (up to 15 characters).
Incoming Call
Caller's name
Caller's phone number
SMITH JOHN
123-456-7890
You may receive any one of the following messages;
When invalid data is received . . . . . . . . . . . . .Incomplete Data
When a private name is received . . . . . . . . .Private Name
When a private number is received . . . . . . . . .Private Number
When an unknown name is received . . . . . . .Unknown Name
Unknown Number
2 When an unknown number is received . . . . . .
• If you answer a call before the Caller ID message is
received (for example, before the second ring), the
Caller ID message will not appear and store.
When you pick up the phone, the display changes to "Talk."
NOTES:
Talk
0:00
Volume Medium
• When the call is received via a telephone company that does not offer Caller
ID service, the caller's phone number and name do not appear and store.
(This includes international calls).
• When the call is via a Private Branch exchange (PBX), the caller's phone
number and name may not appear and store.
• Data errors appear as “ ."
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID/CALL WAITING
SEARCHING CALLER ID MEMORY
To review who has called, follow the steps below.
The caller ID memory retains a listing of the 50 most recent callers.
1
Pick up the handset and press
.
CID
If new caller ID data does not exist:
Total:02
If there is new caller ID data:
New :01
Total:02
1/7
9:30AM 12
2
3
Press
Press
to display the latest incoming call.
to see the previous incoming call.
DOE JOHN
555-2563
Press CID to return to standby mode.
CALLING BACK FROM THE CALLER ID LIST
CID
1
2
Pick up the handset and press
. Then,
1/7
9:30AM 12
press
or
to display the number you SMITH JOHN
456-7890
wish to call.
Press TALK .
TALK
4567890
The displayed number will be dialed.
NOTE:
To enter a number for a long distance call, see “EDITING CALLER ID DATA,” page
30. It is not necessary to add a “1” when dialing some area codes. If in doubt,
check your local telephone directory.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID/CALL WAITING
EDITING CALLER ID DATA
You can edit the Caller ID data.
1
2
Pick up the handset and press CID . Then, press
or
repeatedly to display the Caller ID data you want to edit.
L.D./1
LOCAL/3
Press
for a long distance call prefix “1” and
for area code setting and cancellation.
LOCAL/3
key
1/7
9:30AM 12
1/7
9:30AM 12
Ted Doe
Ted Doe
456-7890
123-456-7890
L.D./1
L.D./1
key
key
1/7
Ted Doe
1-456-7890
9:30AM 12
1/7
9:30AM 12
Ted Doe
1-123-456-7890
LOCAL/3
key
NOTE:
Before you use
LOCAL/3
for area code setting and cancellation, make sure the
AREA CODE is set. (See page 16)
3
After editing Caller ID data, you can make the call or store procedures.
To make a call, press TALK .
MEM
To store into memory dial, press
location with or and press
. Then, select memory
SELECT/CHANNEL
.
TRANSFERING CID NUMBER TO SPEED-DIAL MEMORY
CID
1
Pick up the handset and press
. Then, press
or
to indicate the number you want to store in the memory.
Select Location
MEM
2
3
Press
.
01
02
s
Enter a two-digit number (01-20) or press
to select memory location.
,
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID/CALL WAITING
SELECT/CHANNEL
4
Press
. A confirmation tone sounds and the Caller
CID
ID data is stored. Press
to return to standby.
If you select a memory location which is already stored:
Press
to select “
and press
Replace Memory?
Yes
s
No
”
SELECT/CHANNEL
.
A confirmation tone sounds and the new data overwrites the
old data. The LCD returns to
the Caller ID display screen.
If you select
:
The LCD returns to the Caller ID display screen.
CID
Press
to return to standby mode.
DELETING CALLER ID DATA
DELETE INDIVIDUAL CALLER ID DATA:
CID
1
Pick up the handset and press
. Then, press
or
to display the caller ID number you want to delete from the
memory.
DELETE
2
3
Press
Press
.
Delete Message?
Yes
No
s
or
to select Yesor No.
DELETE
SELECT/CHANNEL
Press
select “
or
. If you
, you hear a confirmation tone and the LCD
”
displays the next caller ID data. If there is none, the LCD
displays the number of calls.
If you select “
screen.
, the LCD returns to the Call ID display
”
CID
4
Press
to return to standby.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID/CALL WAITING
DELETE ALL CALLER ID DATA:
CID
1
Press
.
New :01
Total:02
DELETE
2
3
Press
Press
.
Delete All?
Yes
or
to select Yesor No.
s
No
SELECT/CHANNEL
DELETE
Press
or
, a confirmation tone
sounds and the LCD displays “Total:00.”
.
If you select
Total:00
If you select
, the LCD displays the
New :01
Total:02
number of Caller ID calls.
CID
4
Press
to return to the standby mode.
CALL WAITING
"Caller ID" and "Call waiting" are separate services. CIDCW (Caller ID on
Call Waiting) performs the same as regular Caller ID on a call waiting
number. You must subscribe to the CIDCW services before you can use
the following features. The "Call waiting" service can also be used
independently. Please contact your local telephone company for details.
With Caller ID on call waiting, you can see who is calling to decide if you
want to interrupt your current conversation to answer the incoming call.
1
Before answering a call, check to see that the caller’s name
and telephone number are displayed on the screen. To
switch to the waiting call, press FLASH on the handset. The
first caller is put on hold.
2
To switch back to the first caller, press FLASH again.
NOTES:
FLASH
• Pressing
without having received a Call Waiting signal may
disconnect the current line.
• When CIDCW is set to Opt in the Caller ID setup menu (See page 15), if you
FUNCTION
press
after receiving a call waiting call, you can view a list of
ways to handle the new call. Choose an option using the
and and
,
SELECT/CHANNEL
press
to activate.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID/CALL WAITING
CALL WAITING OPTIONS
Your phone gives you new options for call waiting. At the touch of a
button, you can ask the caller to hold, send them to your voice mail
service,or conference them into your current call. You may be required
to subscribe to a voice mail service, call waiting, and call waiting
options to use these features.
Follow these steps to use call waiting options. This is an example for
“Conference.”
You receive a call waiting call.
Talk
0:02
TOSHIBA CORP
817-858-3300
FUNCTION
Press
.
A list of options appears.
(For more information on the options, see
the table on page 34).
1
s
Ask to Hold
2 Tell Busy
3 Take Message
Press
or
,
or number key (1-7).
Select one of seven options.
5
s
Conference
6 Drop First
7 Drop Last
5
To select “Conference,” press
down to “Conference.”
or scroll
Press
SELECT/CHANNEL
.
Allows you to speak with your first and
second caller to have a 3-way conference
call.
Talk
0:03
Conferenced
FUNCTION
Press
.
The list of options appears.
1
s
Ask to Hold
2 Tell Busy
3 Take Message
6
• To drop 1st caller, press
down to “Drop First,” then
• To drop 2nd caller, press
down to “Drop Last,” then
or scroll
5 Conference
6 Drop First
SELECT/CHANNEL
.
.
7
or scroll
SELECT/CHANNEL
7
s
Drop Last
A confirmation screen appears.
Talk
2:30
Call Dropped
33
Download from Www.Somanuals.com. All Manuals Search And Download.
CALLER ID/CALL WAITING
The options you can choose are shown below:
No.
Option
Meaning
1
Ask to Hold
Prerecorded message asks 2nd caller to
hold, and the waiting call is put on hold.
2
Tell Busy
Prerecorded message tells 2nd caller you
are busy, and the waiting call is
disconnected.
3
4
Take Message
Send 2nd caller to your voice mail service.
Answer / Drop 1 Disconnects 1st caller and answers 2nd
caller.
5
Conference
Starts a 3-way conference call with both
callers.
6
7
Drop First
Drop Last
Disconnects 1st caller.
Disconnects 2nd caller.
NOTES:
• When using each of the options listed above, an extra charge might apply.
• Not all options are available in all areas. Check with your local telephone
company for details.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Should any problem occur with the unit, use the following simple tests to determine
whether or not servicing is required.
PROBLEM
SOLUTION
The handset battery pack
does not charge.
• The charging contacts of the handset and base are not clean.
→ Clean them with a dry cloth.
• The battery is not connected with correct polarity.
→ Install the battery pack correctly.
• The battery is several years old.
→ Replace with a new battery.
• The battery was not fully charged at the initial charging.
→ Charge the battery for 12-16 hours without any
interruption.
Battery pack becomes low
quickly.
• The battery is several years old.
→ Replace with a new battery.
• The AC adaptor of the base unit is disconnected.
→ Plug the AC adaptor into the base unit and the AC 120V outlet.
Can not make or
receive calls.
Can not hear dialtone.
• The battery is low.
→ Place the handset on the base unit to recharge.
• Telephone line cord is disconnected.
→ Check both ends of the telephone jack.
• The previous call was not disconnected.
TALK
→ Press
to disconnect the line.
• Trouble with the telephone line.
→ Check an extension line.
• Outlet used is controlled by a wall switch in its OFF position.
→ Relocate it to another outlet.
• The handset is too far from the base unit.
→ Bring the handset near the base unit.
• The battery is low.
→ Return the handset to the base.
Low battery blinks on the
display.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
PROBLEM
SOLUTION
The handset does not ring
or receive a page.
• The handset is located away from the base or the battery has been
discharged.
→ Return the handset to charge when finished with your call.
• The digital security code is changed.
→ Remove the handset from the base unit and press and hold
PAGE
. While the handset is emitting, return the handset to the
base unit.
• The battery is low.
→ Place the handset on the base unit to recharge.
The handset does not
ring.
• The ringer volume is set to OFF.
→ Turn the ringer volume ON.
• The charging contacts of the handset and the base are not
clean.
CHARGE LED will not light
when the handset is
→ Clean them with a dry cloth.
placed on the base.
• The AC adaptor of the base unit is disconnected.
→ Plug the AC adaptor firmly into the base unit and AC 120V outlet.
• The handset is not on the base.
→ Place the handset on the base properly.
• The handset is too far from the base unit.
→ Bring the handset near the base unit.
Noise or interference
• The battery is low.
→ Place the handset on the base unit to recharge.
• The base unit is located in a place with high interference.
→ Relocate to another outlet.
• Interference from TV, Microwave oven, computer and electrical
appliances.
SELECT/CHANNEL
→ Press
to select a clearer channel, or relocate
the base unit.
• Excessive line noise.
→ Check with another telephone.
• The volume control is set too high.
→ Reduce volume to a lower setting.
• The base antenna is not in a vertical position.
→ Lift the antenna to a vertical position.
• The phone needs to be reset.
→ Disconnect the AC adaptor and reconnect it within 2 minutes to
avoid memory loss.
The unit does not operate
properly.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
PROBLEM
SOLUTION
When the handset is
• This is normal.
returned to the base unit
with the volume level set at
High, a momentary squeal
or howling sound may
sometimes be heard.
→ It may be prevented by changing the volume setting to
Medium or Low before returning the handset to the base unit.
The phone does not
display the Caller ID/Call
Waiting data.
• You have to subscribe to Caller ID/Caller ID on Call Waiting services.
→ Check with your local telephone company.
• You answered the call before Caller ID data was received.
→ Let the phone ring twice before you answer the call.
• The call is via PBX.
→ See page 28.
• The battery is not fully charged.
→Charge the battery.
Auto talk and Any-key
feature do not work.
• Auto talk feature has been set to OFF.
→ Set this feature to ON (Any-key feature automatically set to ON).
Can not use call waiting
options.
• You have to subscribe to Caller ID/Caller ID on Call Waiting services.
→ Check with your local telephone company.
• CIDCW is not set to Opt.
→ Set this feature to Opt.
See page 15.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
SETTING / USING THE PHONE
CALLER ID SERVICE
QUICK
REFERENCE
GUIDE
CALLER ID CORDLESS TELEPHONE
SG-1801
Setting The Tone/Pulse Switch
Set the TONE/PULSE switch to TONE.
Setting Up Caller ID
Making a Call with Caller ID Data
CID
To use Caller ID/Caller ID on Call Waiting features, you must subscribe to both Caller
ID/Caller ID on Call Waiting services provided by your local telephone company.
1 Press
, then press
or
to display the number you want to dial.
Place a call.
Read the Owner’s Manual for details.
TALK
2 Press
, then the displayed number will be dialed.
If the call does not connect with the TONE setting, set the
TONE/PULSE switch to PULSE
Note: For long distance calls, you need a prefix “1” and the area code.
SETTING UP THE BASE UNIT
L.D./1
LOCAL/3
Press
and
to add or cancel “1” and the area code
TALK
before you press
.
Raise the antenna to
vertical position.
Fasten the AC
adaptor cord.
TONE/PULSE switch
Storing Caller ID Data to Speed-Dial Memory
Area Code
CID
1 Press
, then press
or
to display the number you want to store into
3
1 Press
, then press
.
FUNCTION
Speed-dial memory.
2 Press SELECT/CHANNEL and enter your 3-digit area
,
2 Press MEM , then press
,
or enter a memory location number.
Single-Line
Telephone Jack
(RJ11C)
code.
MEM
CID
3
Press SELECT/CHANNEL . A confirmation beep sounds and the Caller ID data is
stored.
3 Press SELECT/CHANNEL , then press
.
FUNCTION
Telephone Line Cord
CID
TALK
Power Outlet
(AC 120V, 60Hz)
FLASH
Press CID to return to standby mode.
LOCAL
L.D.
AC Adaptor
3
Making a Call
NOTE: Plug the AC adaptor firmly into the base unit and the AC 120V outlet.
1
TONE
Deleting Caller ID Data
1
2
3
Dial the phone number.
TALK
RDL/P FUNCTION
SELECT
DELETE
DELETE
CID
1
Press
, then press
or
to display the Caller ID number you want to
Press
Press
.
CHARGING THE BATTERY PACK
FUNCTION
delete from the memory.
DELETE
SELECT/CHANNEL
TALK
to hang up.
Black
2
3
Press
, then press
or to select Yes or No.
1 Remove the battery cover by sliding it down.
Red
FLASH
TALK
DELETE
Press SELECT/CHANNEL or
CID
.
2 Plug the battery pack cord into its socket, observing
the correct polarity.
4 Press
to return to standby mode.
CID
Selecting Caller ID Options
3 Place the battery pack, then close the battery
Answering a Call
LOCAL
L.D.
compartment cover.
FUNCTION
1
Press
.
3
4 Place the handset on the base unit. You can place
TALK
Press
and speak.
Call Waiting Options
2
the handset with the dialpad facing up or down.
2 Press
,
, or
to move the pointer to CIDCW.
NOTE: To indicate Caller ID data, let the
phone ring twice before you answer the call.
TONE
TONE/
3 Press SELECT/CHANNEL to change the option setting.
FUNCTION
for a list of options.
1 When you receive a call waiting call, press
2 Press or to select an option.
RDL/P FUNCTION
SELECT
DELETE
IMPORTANT
Charge the battery pack for at least 12 to 16 hours.
FUNCTION
SELECT/CHANNEL
FUNCTION
4 Press
and return the handset to the base.
See page 15 in the owner’s manual for more information.
3 Press SELECT/CHANNEL to confirm.
IN USE/
CHARGE
LED
TALK
4 Press
or return the handset to the base to end the call.
Charging contacts
UCZZ69738BZ
See page 33 in the owner’s manual for more information.
For more detailed instructions and examples, please refer to the owner’s manual.
RC009817
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
AJUSTE/UTILIZACIÓN DEL TELÉFONO
SERVICIO DE IDENTIFICACIÓN DEL QUE LLAMA
REFERENCIA
RÁPIDA
CALLER ID CORDLESS TELEPHONE
SG-1801
Realización de llamadas con los datos de
Ajuste del dato de identificación del que llama
Ajuste del selector de tono/pulso
Ajuste el selector TONE/PULSE a TONE.
identificación del que llama
Para utilizar el dato de identificación del que llama/dato de identificación del que llama
Para los detalles, lea el manual de instrucciones (en inglés).
Realice una llamada.
con la llamada en espera, deberá subscribirse a ambos servicios de identificación del
que llama/dato de identificación del que llama con la llamada en espera provisto por su
compañía telefónica.
CID
1
Presione
, después presione
o
para visualizar el número que desee marcar.
Si la llamada no se conecta con el ajuste en TONE,
cambie el selector TONE/PULSE a PULSE.
TALK
2
Presione
, después se marcará el número visualizado.
INSTALACIÓN DE LA UNIDAD BASE
Nota: Para llamadas de larga distancia, necesitará fijar de antemano “1” y el código de
L.D./1
LOCAL/3
área. Presione
TALK
y
para añadir o cancelar “1” y el código de área antes
Afirme el cable
del adaptador
de CA.
de presionar
.
Levante la antena
en posición vertical.
Selector TONE/PULSE
Código de área
Almacenamiento de datos de identificación del
3
1 Presione
, después presione
.
FUNCTION
que llama para la memoria de marcación rápida
2
3
Presione SELECT/CHANNEL e introduzca un código de área de 3 dígitos.
CID
1 Presione
, después presione
o
para visualizar el número que desee
Toma telefónica
de línea única
almacenar en la memoria de marcación rápida.
Presione SELECT/CHANNEL , después presione
.
FUNCTION
,
(RJ11C)
2 Presione MEM , después presione
,
o introduzca un número de asignación de la
MEM
TALK
Cable de la línea telefónica
memoria.
CID
Toma de
CID
electricidad (120V
CA, 60Hz)
SELECT/CHANNEL
3 Presione
. Sonará un pitido de confirmación y el dato de
Adaptador de CA
FLASH
LOCAL
L.D.
identificación del que llama se almacenará. Presione CID para volver al modo de
espera.
NOTA: Enchufe firmemente el adaptador de CA en la unidad base y la toma de 120V CA.
3
Realización de una llamada
1
TONE
Borrado de un dato de identificación del que
1 Marque el número de teléfono.
RDL/P FUNCTION
SELECT
DELETE
CARGA DE LA BATERÍA
DELETE
llama
TALK
2 Presione
.
FUNCTION
CID
1 Presione
, después presione
o
para visualizar la identificación del que
TALK
3 Presione
para cortar.
SELECT/CHANNEL
Negro
1 Quite la tapa del compartimiento de la batería
llama cuyo número desee borrar de la memoria.
Rojo
deslizándola hacia abajo.
FLASH
TALK
3
DELETE
2 Presione
, después presione
o
.
para seleccionar Yes (sí) o No.
2 Conecte el cable de la batería en el enchufe,
DELETE
3 Presione SELECT/CHANNEL
o
observando la polaridad correcta.
Selección de las opciones de la identificación
CID
CID
4 Presione
para volver al modo de espera.
3 Coloque la batería, luego cierre la tapa del
del que llama
LOCAL
L.D.
compartimiento de la batería.
Contestación de una
Opciones de la llamada en espera
1 Cuando reciba una llamada en espera, presione
FUNCTION
1 Presione
2 Presione
3 Presione
4 Presione
.
4 Coloque el microteléfono sobre la unidad base.
Usted podrá colocar el microteléfono con el teclado
de marcación encarado hacia arriba o abajo.
llamada
2
FUNCTION
para ver la lista de opciones.
,
, o
para mover el indicador hasta CIDCW.
TALK
Presione
para hablar.
TONE
TONE/
RDL/P FUNCTION
SELECT
DELETE
2
3
4
Presione
Presione
Presione
o
para seleccionar una opción.
NOTA: Para indicar el dato de identificación del que
llama, haga sonar dos veces el teléfono antes de
contestar a la llamada.
SELECT/CHANNEL
FUNCTION
para cambiar al ajuste de la opción.
FUNCTION
IMPORTANTE
SELECT/CHANNEL
TALK
para confirmar.
y regrese el microteléfono a la unidad base.
SELECT/CHANNEL
Cargue la batería durante 12 a 16 horas como mínimo.
IN USE/
CHARGE
LED
Consulte la página 15 del manual de instrucciones para más información.
o regrese el microteléfono a la unidad base para finalizar la llamada.
Consulte la página 33 del manual de instrucciones para más información.
Contactos de carga
UCZZ69738BZ
Para más instrucciones y ejemplos detallados, consulte el manual de instrucciones.
RC009817
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY/SERVICE
SERVICE REQUIREMENTS
If the cordless telephone should malfunction, or need changes or modifications, all
repairs will be performed by an authorized Toshiba Service Station. This unit has been
registered with the FCC for direct connection to the telephone network. Under the
FCC program, no customer is authorized to repair this unit. This applies to units either
in or out of warranty. If an unauthorized repair is performed, the registration of the unit
for direct connection to the network will be null and void. If the unit is still in warranty,
the remainder of the warranty period will also be null and void.
It is the responsibility of users requiring service to report the need for service to the Toshiba
dealer.
IMPORTANT INSTRUCTIONS TO USERS
Your telephone equipment has been designed and constructed to conform to federal
regulations and can be connected to the phone line as described in this manual.
Please note that each product connected to the telephone line places a certain load
on the line. We designate this as the unit’s “Ringer Equivalence Number.”
It is most unlikely, but...If your telephone equipment should cause problems on the
phone line, the phone company has the right to temporarily discontinue your service. If
this happens, the phone company will notify you and give you the opportunity to
correct the problem. Also, you need to know that the phone company does have the
right to make changes in their lines and/or equipment.
If these changes might affect your telephone equipment (or require changes in the
telephone equipment or its connection), the phone company will notify you in writing,
so you have the chance to take whatever action is necessary to ensure uninterrupted
phone service.
FCC REQUIREMENTS
You are no longer required by the FCC to notify your local telephone company of your
intent to connect a new telephone. Your local telephone company may call you and
request information about your phone such as: the brand name, model number,
registration number, and ringer equivalence number. This information is provided on a
label located at the bottom of the base unit and handset.
You may not directly connect your telephone equipment to coin telephone services.
Check with your local telephone company if you wish to connect your telephone
equipment to a party line service. Some party line services require a special adaptor
or modification to your telephone.
It should be noted that some cordless telephones operate at frequencies that may
cause interference to nearby TVs and VCRs; to minimize or prevent such interference,
the base of the cordless telephone should not be placed near or on top of a TV or
VCR; and, if interference is experienced, moving the cordless telephone farther away
from the TV or VCR will often reduce or eliminate the interference.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY/SERVICE
TELEPHONE/TELEPHONE ANSWER MACHINE LIMITED WARRANTY
Toshiba America Consumer Products, Inc. (“TACP”), and Toshiba Hawaii, Inc. (“THI”), make the following
limited warranties. These limited warranties extend to the original consumer purchaser or any person
receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee.
(3) Within the continental U.S.A., if you should
find a defective product within the warranty period
please call 1-877-644-7373.
Limited One (1) Year Warranty of Labor
and parts
TACP/THI warrant this product and its parts
against defects in materials or workmanship for a
period of one (1) year after the date of original
retail purchase. During this period, TACP/THI will
repair or replace your defective product with a new
or refurbished unit at TACP’s option.
(4) Warranties extend only to defects in materials or
workmanship as limited above and do not extend to
any product or parts which have been lost or
discarded by you, or to damage to products or parts
caused by misuse, accident, damage caused by Acts
of God, such as lightning or fluctuations in electric
power, improper installation, improper maintenance
or use in violation of instructions furnished by us;
or to units which have been altered or modified
without authorization of TACP/THI, or to damage
to products or parts thereof which have had the
serial number removed, altered, defaced or
rendered illegible.
Owner’s Manual
You should read the owner’s manual thoroughly
before operating this product.
Your Responsibility
The above warranties are subject to the following
conditions.
(1) You must provide a copy of your bill of sale or
other proof of purchase.
(2) These warranties are effective only if the
product is purchased and operated within the USA
or Puerto Rico.
(5) Physically damaged products are not acceptable
for repair or exchange within or after the warranty
period expires.
How to Obtain Warranty Service
In the event a problem should develop with your product, please proceed as follows;
In The Continental United States contact: In Hawaii contact:
Toshiba Hawaii, Inc.
327 Kamakee Street,
Honolulu, HI 96814
(808)-591-9261
All warranties implied by state law, including the implied warranties of merchantability and fitness for a
particular purpose, are expressly limited to the duration of the limited warranties set forth above. With the
exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and
in lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer or seller with
respect to the repair or replacement of any parts. In no event shall TACP/THI be liable for consequential or
incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of
these warranties in any manner whatsoever. The time within which an action must be commenced to
enforce any obligation of TACP/THI arising under the warranty or under any statute or law of the United
States or any state thereof, is hereby limited to ninety(90) days from the date you discover, or should have
dicovered, the defect. This limitation does not apply to implied warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights which may vary from state
to state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be
brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may
not apply to you.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
For technical assistance, purchase of accessories
IMPORTANT
We suggest you record the following information and retain for
your records along with your bill of sale or equipment document.
Model no.
Purchase date
Dealer address
Serial no.
Dealer
2001 TOSHIBA AMERICA CONSUMER PRODUCTS, INC.
©
UCZZ01738BZ
RC009816
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|