Toshiba CRT Television 36A11 User Manual

TM  
36A11  
© TOSHIBA CORPORATION, 2001  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A polarized alternating current line plug having one blade wider  
than the other. This plug will fit into the power outlet only one way. If  
you are unable to insert the plug into the outlet, try reversing the plug.  
A product and cart combination  
should be moved with care. Quick  
stops, excessive force, and uneven  
surfaces may cause the product  
and cart combination to overturn.  
Un enchufe de línea de corriente alterna polarizado posee una  
cuchilla más ancha que la otra. Este enchufe entrará en la toma de la  
red de una sola forma. Si no puede inertar el enchufe en la toma de la  
red, trate de invertirlo.  
La combinación de un producto y  
un carrito deberá moverse con  
cuidado. Las paradas repentinas,  
la fuerza excesiva, y las superficies  
desiguales pondrían hacer que  
volcase la combinación del carrito  
y del producto.  
Alternate Warnings A three-wire grounding-type plug a plug  
having a third (grounding) pin. This plug will only fit into grounding-  
type power outlet.  
Advertencias alternativas Enchufe de tippo puesta a tierra de tres  
conductores enchufe que posee un tercer terminal (de puesta a  
tierra). Este enchufe solamente encajará en una toma de la red de tipo  
puesta a tierra.  
USE / UTILIZACIÓN  
Overloading Do not overload wall outlets, extension cords or  
convenience receptacles beyond their capacity, since this can result in  
fire or electric shock.  
Water and Moisture Do not use the TV set near water for  
example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a  
wet basement; or near a swimming pool; and the like.  
Sobrecarga No sobrecargue las tomas de la red, los cables  
prolongadores, ni los adaptadores para múltiples tomas, ya que esto  
supondría el riesgo de incendios o de descargas eléctricas.  
Agua y humedad No utilice el televisor cerca del agua por  
ejemplo, cerca de una bañera, un lavabo, un fregadero, una lavadora, en  
un sótano húmedo, cerca de una piscina, ni lugares por el estilo.  
During lightning storms, or when the TV set will be left unattended  
and unused for a long period of time, unplug the power cord from the  
wall outlet and disconnect the antenna or cable system. This will  
prevent damage to the TV set due to lightning and power-line surges.  
Ventilation The slots and openings in the cabinet and in the back or  
bottom are provided for necessary ventilation. Never block or cover  
these slots and openings to ensure reliable operation of the TV set and  
to protect it from overheating.  
Durante tormentas eléctricas, o cuando no vaya a utilizar el televisor  
durante mucho tiempo, desenchufe el cable de alimentación de la toma  
de la red y desconecte la antena o el sistema de cablevisión. Esto evitará  
que se dañe el televisor debido a rayos y a sobretensiones repentinas en  
la red.  
Ventilación Las ranuras y aberturas de la caja y de la parte posterior  
o de la base son para proporcionar la ventilación necesaria. Para  
asegurar la operación fiable del televisor para protegerlo contra el  
recalentamiento. No bloquee ni cubra nunca estas ranuras y aberturas.  
a. Never cover the slots and openings with a cloth or other materials.  
a. No cubra nunca las ranuras ni las aberturas con paños ni otros  
materiales.  
b. Never block the slots and openings by placing the TV set on a bed,  
sofa, rug or other similar surface.  
Object and Liquid Entry Never push objects of any kind into the  
TV set through the cabinet slots as they may touch dangerous voltage  
points or short out parts that could result in a fire or electric shock.  
Never spill liquid of any kind on the TV set.  
Entrada de objetos y líquidos No introduzca nunca objetos de  
ningún tipo en este televisor a través de las aberturas, ya que podrían  
tocar puntos de tensión peligrosa o cortocircuitar piezas, lo que podría  
resultar en incendio o descarga eléctrica. No vierta nunca liquidos de  
ningún tipo sobre este televisor.  
b. No bloquee nunca las ranuras ni las aberturas colocando el televisor  
sobre una cama, un sofá, una alfombra, ni demás superficies similares.  
c. Never place the TV set in a confined space such as a bookcase, built-  
in cabinet, or any other place of poor ventilation.  
c. No coloque nunca el televisor en un espacio cubierto, como una  
librería o un estante empotrados, nien un lugar de mala ventilación.  
Cleaning Unplug the TV set from the wall outlet before cleaning or  
polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth  
lightly dampened with water for cleaning the exterior of the TV set.  
Heat Do not place the TV set near or over a radiator or heat  
register, or where it is exposed to direct sunlight.  
Limpieza Desenchufe el televisor de la toma de la red antes de  
limpiarlo. No utilice limpiadores líquidos ni aerosoles. Para limpiar el  
exterior del televisor, utilice un paño ligeramente humedecido en agua.  
Calor No coloque el televisor cerca ni sobre un radiador ni un  
registro de calor, ni expuesto a la luz solar directa.  
Power-Cord Protection Do not allow anything to rest on or roll  
over the power cord, and do not place the TV set where the power cord  
is subject to wear or abuse.  
Attachments Never add accessories that have not been specifically  
designed for the TV set. Never remodel the TV set by yourself as this  
can result in a fire hazard or electric shock.  
Protección del cable de alimentación No coloque ni pase sobre el  
cable de alimentación, ni coloque el telivisor donde su cable de  
alimentación pueda sufir cualquier tipo de daños.  
Aditamentos No utilice aditamentos no recomendados por el  
fabricante del televisor, ya que podrían suponer un peligro. No  
remodele nunca el televisor usted mismo, ya que esto podría causar el  
riesgo de incendios o descargas eléctricas.  
Accessories Do not place the TV set on an unstable cart, stand,  
tripod, bracket, or table. The TV set may fall, causing serious injury to  
a child or adult, and serious damage to the TV set. Use only with a cart,  
stand, tripod, bracket, or table recommended by the manufacturer, or  
sold with the TV set, and should use a mounting accessory recom-  
mended by the manufacturer.  
If a snapping or popping sound from a TV set is heard continuously or  
frequently while the TV set is operated, unplug the TV set and consult  
your dealer or service technician. It is normal for some TV sets to make  
occasional snapping or popping sounds, particularly when being turned  
on or off.  
Accesorios No coloque el televisor sobre un carrito, una base, un  
trípode, un soporte ni una mesea inestable. El televisor podría caerse,  
causando serios daños a niños o adultos, o al propio televisor. Utilice  
solamente el carrito, la base, el trípode, el soporte, o la mesa que  
recomiende el fabricante, o que se venda con el televisor, y utilice un  
accesorio de montaje recomendado por el fabricante.  
Si se oye un sonido seco de un televisor continuo o frecuente mientras  
el televisor esté funcionando, desenchúfelo y consulte a su proveedor o  
a un técnico de servicio. Es normal que algunos televisores produzcan  
sonidos secos, particularmente cuando conecte o desconecte su  
alimentación.  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SERVICE / SERVICIO DE REPARACIÓN  
When the TV set reaches the end of its useful life, improper disposal  
could result in a picture tube implosion. Ask a qualified service  
technician to dispose of the TV set.  
Damage Requiring Service Unplug the TV set from the wall outlet  
and refer servicing to qualified service personnel under the following  
conditions:  
Cuando el televisor llegue al final de su vida útil, si se deshace de él de  
forma inapropiada, el tubo de imagen puede explotar. Cuando desee  
deshacerse de un televisor, solicite este servicio a un técnico de  
reparación especializado.  
Daños que requieren el servicio de reparación En los casos  
siguientes, desenchufe el televisor de la toma de la red y solicite los  
servicios de personal de reparación especializado:  
a. When the power cord or plug is damaged or frayed.  
a. Cuando se haya dañado el cable de alimentación o el enchufe.  
b. When liquid has been spilled into the TV set.  
ANTENNA / ANTENA  
Outdoor Antenna Grounding If an outdoor antenna is installed,  
follow the precautions below.  
b. Cuando se haya vertido líquido dentro del televisor.  
c. When the TV set has been exposed to rain or water.  
c. Cuando el televisor haya estado expuesto a la lluvia o al agua.  
An outdoor antenna system should not be located in the vicinity of  
overhead power lines or other electric light or power circuits, or where  
it can come in contact with such power lines or circuits.  
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,  
EXTREME CARE SHOULD BE TAKEN TO KEEP FROM  
CONTACTING SUCH POWER LINES OR CIRCUITS AS  
CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.  
d. When the TV set has been subject to excessive shock by being  
dropped, or the cabinet has been damaged.  
d. Cuando el televisor haya estado expuesto a golpes excesivos o haya  
caído, o su caja se haya dañado.  
Be sure the antenna system is grounded so as to provide some  
protection against voltage surges and built-up static charges. Section  
810 of the National Electrical Code in the USA and Section 54 of the  
Canadian Electrical Code in Canada provides information with respect  
to proper grounding of the mast and supporting structure, grounding  
of the lead-in wire to an antenna discharge unit, size of grounding  
conductors, location of antenna discharge unit, connection to  
grounding electrodes, and requirements for the grounding electrode.  
e. When the TV set does not operate normally even though you follow  
the operating instructions. Adjust only those controls that are  
specified in the operating instructions. Improper adjustment of  
other controls may result in damage and will often require extensive  
work by a qualified technician to restore the TV set to normal  
operation.  
When the TV set exhibits a distinct change in performance. This  
indicates a need for service.  
Puesta a tierra de la antena exterior Cuando instale una antena  
exterior, tenga en cuenta las precauciones siguientes.  
e. Cuando el televisor no funcione normalmente incluso al seguir las  
instrucciones de operación. Ajuste solamente los controles indicados  
en las instrucciones de operación, ya que un ajuste inadecuado de  
otros controles podría resultar en daños y a menudo requerirán un  
trabajo difícil por un técnico cualificado para devolver el televisor a  
su funcionamiento normal.  
Un sistema de antena esterior no deberá colocarse cerca de líneas de alta  
tensión ni otros circuitos de iluminación o alimentación, ni donde  
pueda entrar en contacto con tales líneas o circuitos.  
CUANDO INSTALE UN SISTEMA DE ANTENA EXTERIOR,  
TENGA EXTREMADO CUIDADO PARA EVITAR QUE ENTRE  
EN CONTACTO CON TALES LÍNEAS DE ALIMENTACIÓN O  
CIRCUITOS, YA QUE TAL CONTACTO PODRÍA RESULTAR  
INVARIABLEMENTE FATAL.  
Cuando el funcionamiento del televisor haya cambiado  
notablemente esto indica la necesidad del servicio de reparación.  
Servicing Do not attempt to service the TV set yourself. To open or  
remove the covers may expose you to dangerous voltage or other  
hazards. Refer all servicing to qualified service personnel.  
Cerciórese de que el sistema de antena esté puesto a tierra a fin de que  
proporcione cierta protección contra sobretensiones y cargas estáticas.  
La Sección 810 del Código Eléctrico Nacional (NEC) de EE.UU. y la  
Sección 54 del Código Eléctrico Canadiense ofrecen informacón con  
respecto a la puesta a tierra adecuada de una unidad de descarga de  
antena, el tamaño de los conductores de puesta a tierra, la ubicación de  
la unidad de descarga de la antena, la conexión de los electrodos de  
puesta a tierra, y los requisitos de tales electrodos.  
Reparación No intente nunca reparar el televisor por sí mismo. La  
apertura o extracción de cubiertas podría exponerle a tensiones  
peligrosas u otros peligros. En caso de avería solicite los servicios de  
personal de reparación cualificado.  
Replacement Parts When replacement parts are required, be sure  
the service technician certifies in writing that he has used replacement  
parts specified by the manufacturer that have the same characteristics as  
the original parts. Unauthorized substitutions may result in fire, electric  
shock, or other hazards.  
Reemplazo de piezas Cuando sea necesario reemplazar piezas,  
cerciórese de que el técnico de reparación utilice las piezas de reemplazo  
especificadas por el fabricante u otras que posean las mismas  
características que las originales. Las substituciones no autorizadas  
podrían resultar en incendios, descargas eléctricas, u otros peligros.  
Safety Check Upon completion of any service or repairs to the TV  
set, ask the service technician to perform routine safety checks (as  
specified by the manufacturer) to determine that the TV set is in safe  
operating condition, and to so certify.  
Comprobación de seguridad Al finalizar cualquier reparación de  
este televisor, solicite al técnico de reparación que realice las  
comprobaciones de sguridad (especificadas por el fabricante) para  
determinar y certificar si el producto se encuentra en las condiciones de  
operación apropiadas.  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Welcome to Toshiba ..............................................................................................................................1  
Exploring your new TV............................................................................................................................... 1  
Selecting a location for the TV .................................................................................................................... 1  
Connecting your TV ...............................................................................................................................2  
Connecting a VCR...................................................................................................................................... 2  
Connecting a cable converter box................................................................................................................ 3  
Connecting a cable converter box and a VCR ............................................................................................. 3  
Connecting a DVD/satellite receiver and a VCR ......................................................................................... 4  
Connecting a DVD with ColorStreamand a VCR ................................................................................. 4  
Connecting two VCRs ................................................................................................................................ 5  
Connecting a camcorder ............................................................................................................................. 6  
Connecting an audio amplifier .................................................................................................................... 6  
Using the remote control .....................................................................................................................7  
Preparing the remote control for use............................................................................................................ 7  
Installing the remote control batteries ......................................................................................................... 7  
Using the remote control with a VCR or a cable TV converter .................................................................... 7  
Programming the remote control for use with a VCR or a cable TV converter ............................................ 8  
VCR code table ..................................................................................................................................... 9  
Cable TV converter code table .............................................................................................................. 9  
Location of controls .................................................................................................................................. 11  
Setting up your TV .............................................................................................................................. 12  
Changing the on-screen display language .................................................................................................. 12  
Selecting the antenna input ....................................................................................................................... 12  
Using the TV/VIDEO button ............................................................................................................. 12  
Adding channels to the TVs memory ....................................................................................................... 13  
Programming channels automatically .................................................................................................. 13  
Adding and erasing channels manually ................................................................................................ 14  
Changing channels .................................................................................................................................... 14  
Using the TVs features...................................................................................................................... 15  
Adjusting the channel settings ................................................................................................................... 15  
Switching between two channels ......................................................................................................... 15  
Programming your favorite channels ................................................................................................... 15  
Using the V-Chip ...................................................................................................................................... 16  
Selecting a PIN code ........................................................................................................................... 16  
Blocking programs by ratings .............................................................................................................. 17  
Blocking unrated movies or programs ................................................................................................. 20  
Blocking channels ............................................................................................................................... 20  
Video Lock ............................................................................................................................................... 21  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
Labeling channels ...................................................................................................................................... 22  
Video Label ............................................................................................................................................... 23  
Watching picture-in-picture (PIP) ............................................................................................................. 24  
Switching the main and small pictures ................................................................................................ 25  
Changing the position of the small picture .......................................................................................... 25  
Freezing the small picture .................................................................................................................... 25  
Watching multi-window PIP ..................................................................................................................... 25  
Adjusting the picture ................................................................................................................................. 26  
Adjusting the picture quality ............................................................................................................... 26  
Selecting the color temperature ........................................................................................................... 27  
Adjusting the picture preferences......................................................................................................... 27  
Watching video input ................................................................................................................................ 27  
Displaying on-screen information ............................................................................................................. 27  
Setting the off-timer .................................................................................................................................. 27  
Auto power off .......................................................................................................................................... 28  
Using the closed caption feature ................................................................................................................ 28  
Adjusting the sound .................................................................................................................................. 29  
Muting the sound ............................................................................................................................... 29  
Selecting stereo/SAP broadcasts ........................................................................................................... 29  
Adjusting the sound quality................................................................................................................. 30  
Using the surround sound feature ....................................................................................................... 31  
Viewing the demonstration mode ............................................................................................................. 31  
Understanding the last mode memory feature ........................................................................................... 31  
Appendix............................................................................................................................................... 32  
Cleaning and care...................................................................................................................................... 32  
Troubleshooting ........................................................................................................................................ 32  
Specifications ............................................................................................................................................ 33  
Limited United States warranty ................................................................................................................. 34  
Attention Canadian customers ............................................................................................................ 35  
Index ...................................................................................................................................................... 36  
vi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Welcome to Toshiba  
Congratulations! You have purchased one of the finest color TVs on the market. The goal of this manual is to  
guide you through setting up and operating your Toshiba TV as quickly as possible. Please make sure you’ve  
received the following items: TV, remote control, batteries, manual, registration card, and extended service plan  
literature. If you did not receive all of the items, or any of the items are damaged or broken, please contact your  
Toshiba dealer. In addition, you may need to purchase other audio or video cables to connect your equipment.  
See “Connecting your TV” on page 2 for more information.  
Please read all the safety and operating instructions carefully before you begin.  
Exploring your new TV  
You can operate your TV by using the buttons on the front panel or the remote control. The back panel provides  
all the terminal connections you will need to connect other equipment to your TV.  
36A11  
POWER  
RECALL  
MUTE  
2
5
8
3
6
1
4
7
9
CH RTN  
ENT  
100  
0
CH  
MENU/  
ENTER  
VOL  
VOL  
CH  
TV  
CABLE  
VCR  
EXIT  
FAV CH  
TV/VIDEO  
REC TV/VCR STOP PLAY  
STILL SOURCE PIP  
SLOW PAUSE REW  
FF  
PIP CH LOCATE SWAP  
Caution:  
Selecting a location for the TV  
The plug has one prong wider than the other  
and will fit only one way into a standard  
electrical outlet (120 volt AC, 60 Hz). If the  
plug does not fit into the outlet, try turning it  
around. If the plug still does not fit, the outlet  
is probably non-standard and must be  
replaced by a qualified electrician. Do not  
tamper with the plug or try to force it  
into a non-standard outlet.  
• Place the TV on the floor or on a sturdy platform in a location  
where light does not directly hit the screen.  
• Place the TV far enough from the walls to allow proper ventila-  
tion. Inadequate ventilation may cause overheating, which may  
damage the TV.  
The model number and serial number are on the back of your TV.  
Record these numbers in the spaces below. Refer to these numbers  
whenever you communicate with your Toshiba dealer about this TV.  
wide prong  
Model number: ________________________  
Serial number: ________________________  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting your TV  
If you havent connected electronic equipment before, or you have  
been frustrated in the past, you may wish to read this section. (Cables  
are not supplied.)  
A coaxial cable is the standard cable that comes in from your  
antenna or cable converter box. Coaxial cables use Fconnectors.  
Audio and video cables are usually color coded according to use:  
yellow for video and red and white for audio. The red audio cable  
is for the stereo right channel, and the white audio cable is for the  
stereo (or mono) left channel. If you look at the rear panel of the  
TV, you will see that the terminals are color coded in the same  
manner as the cables.  
S-video cables provide better picture performance. S-video cables  
can only be used with S-video compatible components.  
ColorStreamTM cables come in sets of three and provide the best  
picture performance. ColorStream cables can only be used with  
ColorStream compatible components.  
S-Video  
Cable  
ANTENNA  
Coaxial Cable  
Caution:  
Do not plug the TV in until you have finished  
connecting all of your equipment.  
ColorStream  
Cable  
AUDIO  
Cable  
VIDEO  
Cable  
Connecting a VCR  
This connection allows you to watch local channels and video pro-  
grams, play or record on the VCR while watching TV, and to record  
from one channel while watching another channel.  
You will need:  
one coaxial cable  
one pair of audio cables (only one cable for a mono VCR)  
one video cable  
Cable Lead-in from Cable Box  
or Antenna  
TV  
ANT (75)  
Caution:  
ANT-1  
OUT  
ANT-2  
If using a mono VCR, connect L/Mono to  
VCR Audio OUT using only one audio cable. If  
you have a S-VHS VCR, use the S-video  
connections and remove the video cable.  
DVD IN  
OUT  
VIDEO  
IN  
VIDEO 2 VIDEO 1  
COLOR  
STREAM  
INPUT  
Y
VIDEO  
L
MONO  
L/MONO  
Cb  
L
S VIDEO  
AUDIO  
R
AUDIO  
R
AUDIO  
R
Do not connect the video cable and the  
S-video cable to Video-1 simultaneously.  
Cr  
Stereo VCR  
VIDEO  
AUDIO  
L
R
IN  
IN from ANT OUT to TV  
CH 3  
CH 4  
OUT  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a cable converter box  
This connection allows you to watch cable and premium channels.  
You should keep your TV selected to ANT-1 so that you can use the  
TV features. When viewing premium channels, select ANT-2 and  
tune the TV to channel 3 or 4 (whichever channel is vacant in your  
area), then use the converter box to change channels.  
You will need two coaxial cables.  
From Cable  
ANT (75)  
ANT-1  
OUT  
ANT-2  
DVD IN  
OUT  
VIDEO  
IN  
DEO 2 EO 1  
COLOR  
STREAM  
INPUT  
Y
VIDEO  
L
MONO  
L/MONO  
Cb  
L
S VIDEO  
AUDIO  
R
AUDIO  
R
AUDIO  
R
Cr  
IN  
OUT  
cable converter box  
Connecting a cable converter box and a VCR  
This connection allows you to watch and record basic and premium  
cable channels, as well as watch videotapes. Change the TV to video  
mode. Tune the VCR to channel 3 or 4 (the same channel as the cable  
box output switch). Use the cable convertor box to change channels.  
The PIP source should be set to TV mode. (see page 24)  
You will need:  
three coaxial cables  
one pair of audio cables (only one cable for a mono VCR)  
one video cable  
cable splitter  
From Cable  
Caution:  
IN  
If you have a mono VCR, connect L/Mono to  
VCR Audio OUT using only one audio cable.  
If you have a S-VHS VCR, use the S-video  
connections and remove the video cable. Do  
not connect the video cable and the  
S-video cable to Video-1 simultaneously.  
cable splitter  
OUT  
OUT  
cable converter box  
TV  
ANT (75)  
ANT-1  
OUT  
ANT-2  
DVD IN  
OUT  
VIDEO  
IN  
VIDEO 2 VIDEO 1  
COLOR  
STREAM  
INPUT  
Y
VIDEO  
L
MONO  
L/MONO  
Cb  
L
S VIDEO  
AUDIO  
R
AUDIO  
R
AUDIO  
R
Cr  
Stereo VCR  
VIDEO  
AUDIO  
L
R
IN  
IN from ANT OUT to TV  
CH 3  
CH 4  
OUT  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a DVD/satellite receiver and a VCR  
This connection allows you to watch DVD/satellite, video and TV  
programs. You can record from the DVD/satellite receiver and TV, as  
well as record one TV channel while watching another channel.  
You will need:  
one coaxial cable  
three pairs of audio cables (only one cable for a mono VCR)  
two video cables  
one S-video cable  
To Satellite  
DVD / Satellite Receiver  
AUDIO  
OUT  
L
VIDEO  
OUT  
Caution:  
S VIDEO  
Satellite IN  
R
You can use a video cable instead of the  
S-video cable, but the picture quality will  
decrease. If you use a S-video cable between  
the TV and DVD/satellite receiver, make the  
audio connections only and remove the video  
connection.  
TV  
ANT (75)  
Do not connect the video cable and the  
S-video cable to Video-1 simultaneously.  
ANT-1  
OUT  
ANT-2  
DVD IN  
OUT  
VIDEO  
IN  
VIDEO 2 VIDEO 1  
COLOR  
STREAM  
INPUT  
Y
VIDEO  
L
MONO  
L/MONO  
Cb  
L
S VIDEO  
AUDIO  
R
AUDIO  
R
AUDIO  
R
Cr  
Stereo VCR  
VIDEO  
AUDIO  
L
R
IN  
IN from ANT OUT to TV  
CH 3  
CH 4  
OUT  
Connecting a DVD with ColorStreamand a VCR  
This connection allows you to watch DVD, video or TV programs  
and to record DVD or TV programs. You can record from one source  
and watch a program from another source. Your TV is capable of using  
ColorStream (color difference). Connecting your TV to a ColorStream  
compatible DVD, such as a Toshiba DVD, can greatly enhance  
picture quality and performance.  
You will need:  
one coaxial cable  
three pairs of audio cables (only one cable for a mono VCR)  
two video cables  
one set of ColorStream video cables  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
To Antenna  
TM  
DVD Player with ColorStream  
AUDIO  
OUT  
L
L
VIDEO  
OUT  
COLORSTREAMTM  
S VIDEO  
R
R
Y
Cb  
Cr  
TV  
ANT (75)  
Caution:  
ANT-1  
OUT  
ANT-2  
To play from the DVD, the DVD and TV must  
use ColorStream connections. To record from  
the DVD, the DVD and TV must select Video.  
DVD IN  
OUT  
VIDEO  
IN  
VIDEO 2 VIDEO 1  
COLOR  
STREAM  
INPUT  
Y
VIDEO  
L
MONO  
L/MONO  
Cb  
Cr  
L
S VIDEO  
AUDIO  
R
AUDIO  
R
AUDIO  
R
Stereo VCR  
VIDEO  
AUDIO  
L
R
IN  
IN from ANT OUT to TV  
CH 3  
CH 4  
OUT  
Connecting two VCRs  
This connection allows you to record from one VCR to another VCR  
while watching a video program. You will also be able to record from  
one TV channel while watching another channel.  
You will need:  
one coaxial cable  
two pairs of audio cables (only two cables for mono VCRs)  
two video cables  
Caution:  
Do not connect one VCR to the output and  
input jacks on the TV at the same time. If you  
are using a S-VHS VCR, use the S-video  
connections and remove the video cable. Do  
not connect the video cable and the S-video  
cable to Video-1 simultaneously.  
Stereo VCR / Playback  
VIDEO  
AUDIO  
L
R
IN  
IN from ANT OUT to TV  
CH 3  
CH 4  
OUT  
TV  
ANT (75)  
ANT-1  
OUT  
ANT-2  
DVD IN  
OUT  
IN  
VIDEO 2 VIDEO 1  
VIDEO  
COLOR  
STREAM  
Y
VIDEO  
INPUT  
L
L
MONO  
L/MONO  
Cb  
S VIDEO  
AUDIO  
R
AUDIO  
R
AUDIO  
R
Cr  
Stereo VCR / Recording  
VIDO  
AUDIO  
L
R
IN  
IN from ANT OUT to TV  
CH 3  
CH 4  
OUT  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a camcorder  
This connection allows you to watch video materials recorded on a  
camcorder.  
Caution:  
If you are using a S-VHS camcorder with a  
S-video output, connect this to the S-video  
input on the TV and remove the video cable.  
Do not connect the video cable and the  
S-video cable to Video-1 simultaneously.  
You will need:  
one pair of audio cables  
one video cable  
Camcorder  
VIDEO AUDIO  
OUT  
L
R
TV Back  
ANT (75)  
ANT-1  
OUT  
ANT-2  
DVD IN  
OUT  
VIDEO  
IN  
VIDEO 2 VIDEO 1  
COLOR  
STREAM  
INPUT  
Y
VIDEO  
L
MONO  
L/MONO  
Cb  
L
S VIDEO  
AUDIO  
R
AUDIO  
R
AUDIO  
R
Cr  
Connecting an audio amplifier  
This connection allows you to use an audio amplifier to adjust the  
audio level. This also allows you to use external speakers.  
To control the audio, turn on the TV and the stereo amplifier.  
You will need one pair of audio cables.  
To Cable, Cable Box  
or Antenna  
Audio Amplifier  
AUDIO  
L
R
IN  
OUT  
TV  
ANT (75)  
ANT-1  
OUT  
ANT-2  
DVD IN  
OUT  
IN  
VIDEO 2 VIDEO 1  
VIDEO  
COLOR  
STREAM  
INPUT  
Y
VIDEO  
L
MONO  
L/MONO  
Cb  
L
S VIDEO  
AUDIO  
R
AUDIO  
R
AUDIO  
R
Cr  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the remote control  
Preparing the remote control for use  
Note:  
With the remote control, you can operate your TV, most VCR  
models, and cable TV converters together, even if they are different  
brands. If you will be using your TV with a Toshiba VCR, your  
remote control is already programmed and ready to use. If you own  
different brands of VCRs and/or converters, you first have to program  
your remote control. (See Programming the remote control for use  
with a VCR or a cable TV converteron page 8.)  
This remote control’s functions may or may  
not operate your VCR or cable TV converter.  
Refer to the owner’s manuals supplied with  
the equipment to see which features are  
available. In addition, the original controllers  
may have features not available on this  
remote control. If you would like to continue  
to use these features, you may want to use  
the original remote control.  
Installing the remote control batteries  
To install the batteries:  
Caution:  
• Dispose of your batteries in a designated  
disposal area. Do not throw your batteries  
into a fire.  
1. Slide the battery cover off of the back of the remote control.  
• Do not mix battery types or combine used  
batteries with new ones.  
• Remove dead batteries immediately to  
prevent battery acid from leaking into the  
battery compartment.  
• If you do not intend to use the remote  
control for a long time, remove the  
batteries.  
2. Install two AAsize batteries. Match the + and - signs on the  
batteries to the signs on the battery compartment.  
POWER  
RECALL  
MUTE  
POWER  
2
5
8
3
6
1
4
7
Channel  
Number  
9
CH RTN  
3. Slide the battery cover back on to the remote control until the  
lock snaps.  
ENT  
100  
0
Enter  
Channel  
CH  
Using the remote control with a VCR or a cable  
TV converter  
MENU/  
ENTER  
VOL  
VOL  
CH  
To control a Toshiba VCR:  
TV/Cable/VCR  
TV/VCR  
TV  
CABLE  
VCR  
Set the TV/CABLE/VCR switch to the VCR position. The  
buttons shown to the right will then control the VCR. The  
rest of the buttons will operate the TV as usual.  
EXIT  
FAV CH  
TV/VIDEO  
Play  
Stop  
To control a cable TV converter:  
REC TV/VCR STOP PLAY  
STILL SOURCE PIP  
Program the remote control to recognize the brand of your  
converter (see Programming the remote control for use with a  
VCR or cable TV converter,page 8). The shaded buttons shown  
on the right will control the cable TV converter.  
Record  
Fast Forward  
Rewind  
Pause  
SLOW PAUSE REW  
FF  
PIP CH LOCATE SWAP  
Slow  
Set the TV/CABLE/VCR switch to the CABLE position.  
Note:  
Some cable/TV converters may require the  
ENT key to be pressed after pressing channel  
numbers. (i.e. 0 – 2 – ENT)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programming the remote control for use with a  
VCR or a cable TV converter  
Recall  
POWER  
POWER  
RECALL  
MUTE  
This remote control is pre-programmed to operate Toshiba VCRs. To  
use VCRs or cable converters other than Toshiba models, you must  
follow the steps below before you operate your remote control.  
2
5
8
3
6
1
4
7
1. Refer to the VCR code tableor Cable TV converter code  
tableon pages 9-10 to find the number that corresponds to the  
brand name of your VCR or converter.  
Number  
9
CH RTN  
ENT  
100  
0
If more than one number is listed, try each one separately until  
you find the one that works.  
CH  
2. If you are reprogramming the remote control to operate your:  
VCR, set the TV/CABLE/VCR switch on the remote control  
to VCR.  
MENU/  
ENTER  
VOL  
VOL  
CH  
cable converter, set the TV/CABLE/VCR switch on the  
remote control to CABLE.  
TV  
CABLE  
VCR  
EXIT  
3. Hold down the RECALL button while using the Number buttons  
to enter the three-digit code number of your brand of VCR or  
converter.  
4. Point the remote control at the VCR or converter and press  
POWER to test the code number.  
Note:  
If the VCR or converter turns on, you have entered the right  
number.  
Each time you replace the batteries, you  
must reprogram the remote control.  
If the VCR or converter does not respond to the remote control,  
you may have entered the wrong number. Repeat steps 1-4 with  
another code number.  
Some newer VCRs are capable of working  
on either of two remote codes. These  
VCRs have a switch labeled VCR1/VCR2.”  
If your VCR has this kind of switch, it may  
not respond to any of the code numbers for  
your VCR brand name. In this case, set the  
switch to the other position (VCR1 or  
For future reference, write down the code numbers you used:  
VCR code _____________________  
Cable code _____________________  
VCR2) and reprogram the remote control.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR code table  
Brand name  
Code number  
Scott  
Sears  
062, 064, 140, 203,  
229, 230, 231  
054, 056, 061, 065,  
066, 073, 085, 123,  
124  
Adventura  
Aiko  
Aiwa  
019  
297  
019  
Magnavox  
054, 058, 100, 129,  
168  
259  
054, 100  
Magnin  
Marantz  
Marta  
Akai  
060, 068, 080, 125,  
261  
056  
Sharp  
067, 081  
091  
259  
091  
051, 052, 053, 054  
061  
American High  
Asha  
Audiovox  
Beaumark  
Bell & Howell  
Brandt  
054  
259  
056  
259  
123  
206  
Matsushita  
MEI  
Memorex  
054  
054  
Shintom  
Shogun  
Singer  
Sony  
019, 054, 056, 058,  
065, 066, 067, 123,  
259  
STS  
MGA  
062, 080  
Sylvania  
019, 054, 062, 100,  
129  
Broksonic  
140, 203, 230, 314,  
380  
MGN Technology 259  
Minolta  
061, 124  
Symphonic  
Tatung  
019, 344  
060  
Calix  
Canon  
056  
054  
Mitsubishi  
062, 080, 086, 094,  
192, 233, 261  
Teac  
019, 060  
054, 181  
019, 054, 056, 071  
206  
227, 259  
Capehart  
Carver  
CCE  
Citizen  
Colt  
039  
100  
091, 297  
056, 297  
Motorola  
MTC  
Multitech  
NAD  
054, 067  
019, 259  
019, 091  
077  
Technics  
Teknika  
Telefunken  
TMK  
091  
NEC  
057, 059, 060, 069,  
Toshiba  
062, 064, 085, 229,  
231, 385  
056, 259  
259  
064  
057, 059  
059, 064, 080  
259  
019, 054, 061, 066,  
067, 081, 091, 168,  
231, 259  
019, 054, 091  
057  
Craig  
056, 066, 091, 259  
054, 060, 079  
259  
039, 064, 297  
039  
019  
056  
056  
051  
019, 021, 056, 062,  
080, 087, 140, 203,  
227, 228, 230, 231,  
297, 313, 314, 380,  
498  
066, 073, 085, 123  
052, 054  
019, 344  
086  
056  
259  
054  
Curtis Mathes  
Cybernex  
Daewoo  
Daytron  
Dynatech  
Electrohome  
Electrophonic  
Emerex  
Nikko  
Noblex  
Olympus  
Optimus  
Optonica  
Orion  
Totevision  
Unitech  
Vector  
Vector Research  
Video Concepts  
Videosonic  
Wards  
056, 067, 077, 123  
081  
498  
Panasonic  
054, 096, 181, 244,  
473  
054, 056, 057, 059,  
061, 073, 259  
061, 084, 124  
054  
054, 081, 100, 129  
056  
077, 086  
039  
091  
058  
065  
065  
054, 096  
019, 056, 344  
056  
056  
061, 079, 084, 096,  
124, 125, 168, 221  
019, 054, 056, 065,  
066, 067, 081, 085,  
123, 259  
Emerson  
Penney  
XR-1000  
Yamaha  
Zenith  
Pentax  
Philco  
Philips  
Pilot  
Pioneer  
Portland  
Protec  
052, 053, 058  
Fisher  
Fuji  
Funai  
Garrard  
GE  
Goldstar  
Gradiente  
Cable TV converter  
code table  
Brand name  
019, 344  
Code number  
020, 022, 026, 027,  
030, 032, 033, 036,  
066  
041  
041, 058, 172  
075  
075  
041  
041  
172  
172  
044, 050  
059, 079  
038  
027  
021  
054, 079, 084, 221  
037, 056, 057  
019  
Pulsar  
ABC  
Quarter  
Quartz  
Quasar  
Radio Shack  
Radix  
Harley Davidson 019  
Antronix  
Archer  
Belcor  
Harman/Kardon  
Harwood  
Headquarter  
HI-Q  
057, 094  
087, 091  
065  
Randex  
RCA  
Cable Star  
Cabletenna  
Cableview  
Century  
Citizen  
Colour Voice  
Comtronics  
Contec  
066  
Hitachi  
060, 061, 084, 124,  
185, 254  
060  
027, 060, 086  
057, 060, 086  
091  
054, 056  
019, 227  
091  
Realistic  
Jensen  
JVC  
Kenwood  
KLH  
Kodak  
Lloyd  
Logik  
LXI  
Ricoh  
053  
058  
064, 259  
058, 067  
060, 086  
065, 066, 123, 259  
Runco  
Samsung  
Sanky  
Sansui  
Sanyo  
DaeRyung  
Eastern  
Focus  
419  
056  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cable TV converter  
code table (continued)  
Brand name  
Code number  
Garrard  
172  
CG Electronics  
Gemini  
075  
034, 089  
General Instrument 030, 295  
Gold Star  
Hamlin  
059, 163  
028, 039, 053, 278,  
292  
Hitachi  
Hytex  
Jasco  
030  
026  
172  
Jerrold  
022, 030, 031, 033,  
034, 066, 295  
052  
046  
019  
Macom  
Magnavox  
Memorex  
Movie Time  
NSC  
175  
089, 175  
026, 038, 267  
019, 040, 126  
019  
044, 046, 047, 048,  
049, 050, 172  
042, 163, 552  
Oak  
Panasonic  
Paragon  
Philips  
Pioneer  
Popular Mechanics 419  
Pulsar  
019  
RCA  
040  
Regal  
039, 278, 292  
419  
021  
030, 089  
019  
Recoton  
Regency  
Rembrandt  
Runco  
Samsung  
059, 163  
Scientific Atlanta 025, 027, 036, 296  
Signal  
034, 059  
030  
059  
Signature  
SL Marx  
Sprucer  
Standard  
040  
Components  
174  
Starcom  
Stargate  
Starquest  
Sylvania  
Teleview  
Texscan  
022, 034, 066  
034, 059  
034  
020  
059  
020  
Tocom  
Toshiba  
031, 032, 078  
019  
Tusa  
034  
Unika  
041, 172  
026  
022  
041, 058, 075, 096,  
172, 210  
046, 079, 230  
019  
United Artists  
United Cable  
Universal  
Viewstar  
Zenith  
Zentek  
419  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Location of Controls  
For details on the use of each control, refer to pages in brackets.  
TV front panel  
TV/VIDEO [12]  
VOLUME T/S  
CHANNEL s/t[14]  
POWER  
MENU  
TV/VIDEO VOLUME  
CHANNEL  
T
S
t
s
T/S/t/s[14]  
POWER [8, 28]  
MENU [12]  
Remote sensor  
POWER indicator  
Remote Control  
G
This Remote Control is equipped with buttons (marked G) that glow in the dark.  
G
Only the buttons that are used to operate the TV set are described here.  
Recall [27]  
Mute [29]  
POWER  
RECALL  
MUTE  
POWER  
2
5
8
3
6
1
4
7
Channel  
Numbers [14]  
9
CH RTN  
Channel  
Return [15]  
ENT  
100  
0
Channel  
[14]  
CH  
Volume  
MENU/  
ENTER  
VOL  
VOL  
Menu/Enter  
CH  
TV  
TV  
Cable  
VCR  
CABLE  
VCR  
Exit [12]  
EXIT  
Fav Ch  
FAV CH  
TV/VIDEO  
TV/Video [12]  
REC TV/VCR STOP PLAY  
STILL SOURCE PIP  
PIP Functions [24-26]  
SLOW PAUSE REW  
FF  
PIP CH LOCATE SWAP  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your TV  
After youve installed the batteries and programmed the remote  
control, you need to set some preferences on the TV using the menu.  
You can access the menu with the buttons on your TV or by using the  
remote control.  
When you make a menu selection, your changes occur immediately.  
You do not have to press MENU or EXIT to see your changes.  
After fifteen seconds, the menu screen will automatically disappear if  
you do not make a selection. Your changes will still be saved.  
TV/VIDEO  
VOLUME T/S  
CHANNEL s/t  
When you are finished programming the menus, press EXIT.  
Changing the on-screen display language  
You can choose from three different languages (English, French and  
Spanish) for the on-screen displays. Adjustment menus and messages  
will appear in the language of your choice.  
MENU  
TV/VIDEO VOLUME  
CHANNEL  
T
S
t
s
To select a language:  
T/S/t/s  
1. Press MENU, then press x or until the SET UP menu appears.  
MENU  
PICTURE AUDIO  
LANGUAGE:  
SETUP PREFER C.CAPT  
PICTURE AUDIO  
LANGUAGE:  
SETUP PREFER C.CAPT  
ENGLISH[FRANCAIS]  
ESPANOL  
[ENGLISH]FRANCAIS  
ESPANOL  
[ANT1]ANT2  
[ANT1]ANT2  
ANT1/2:  
ANT1/2:  
[TV]CABLE  
TV/CABLE:  
[TV]CABLE  
PROGRAMME CAN  
TV/CABLE:  
CH PROGRAM  
ADD/ERASE:  
MORE  
[ADD]ERASE  
[ADD]EFF  
ADD/EFF:  
MORE  
POWER  
RECALL  
MUTE  
SELECT[  
]
BOUGER[  
] CHOISIR[  
]
2
5
8
3
6
1
4
7
2. Press y or z to highlight LANGUAGE.  
3. Press x or to highlight your desired language.  
9
CH RTN  
Selecting the antenna input  
ENT  
100  
0
You can connect to two different signal sources by choosing the  
antenna input (ANT 1 or ANT 2).  
CH  
Menu/Enter  
To select the antenna input:  
MENU/  
ENTER  
VOL  
VOL  
1. Press MENU, then use x or to highlight the SET UP menu.  
2. Press y or z to highlight ANT 1/2.  
CH  
TV  
CABLE  
VCR  
Exit  
EXIT  
PICTURE AUDIO  
LANGUAGE:  
SETUP PREFER C.CAPT  
[ENGLISH]FRANCAIS  
ESPANOL  
[ANT1]ANT2  
ANT1/2:  
[TV]CABLE  
TV/CABLE:  
CH PROGRAM  
ADD/ERASE:  
MORE  
[ADD]ERASE  
SELECT[  
]
3. Press x or to highlight either ANT 1 or ANT 2, depending on  
the antenna terminal you wish to use.  
Using the TV/VIDEO button  
You can monitor or change the signal source that is connected to the TV.  
By pressing the TV/VIDEO button on your TV, you can select the  
VIDEO 1, VIDEO 2, ColorStream, ANT 1 or ANT 2 mode. The signal  
source you are currently connected to will be displayed in purple.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To select the antenna input:  
TV/VIDEO  
1. Press the TV/VIDEO button on the TV. The signal source you  
are connected to is displayed in purple.  
TV  
VIDEO 1 ANT 1  
VIDEO 2 ANT 2  
POWER  
MENU  
TV/VIDEO VOLUME  
CHANNEL  
COLOR  
STREAM  
T
S
t
s
TO SELECT PUSH TV/VIDEO  
2. Press the button until ANT 1 or ANT 2 is displayed in purple,  
indicating the antenna terminal you wish to use.  
Adding channels to the TVs memory  
Your TV will stop on specific channels that are stored in the TVs  
channel memory when you press Channel L or M. Use the steps below  
to set all active channels in your area automatically.  
Programming channels automatically  
Your TV can automatically detect all active channels and store them in  
its memory. After the TV has stored the channels in its memory, you  
can erase channels or add your favorite channels. If you use both  
ANT-1 and ANT-2 terminals, you must program channels for each  
input source.  
To add channels:  
1. Press MENU, then press x or to highlight the SET UP menu.  
2. Press y or z until the TV/CABLE selection is highlighted.  
3. Press x or to highlight either TV or CABLE, depending on  
POWER  
RECALL  
MUTE  
which you use.  
2
5
8
3
6
1
4
7
PICTURE AUDIO  
LANGUAGE:  
SETUP PREFER C.CAPT  
[ENGLISH]FRANCAIS  
ESPANOL  
[ANT1]ANT2  
9
ANT1/2:  
[TV]CABLE  
TV/CABLE:  
CH PROGRAM  
ADD/ERASE:  
MORE  
CH RTN  
ENT  
100  
[ADD]ERASE  
0
SELECT[  
]
CH  
If you use an antenna, choose TV.  
If you use cable, choose CABLE.  
4. Press z to select CH PROGRAM.  
Menu/Enter  
MENU/  
ENTER  
VOL  
VOL  
CH  
5. Press x or to start channel programming. The TV will automati-  
cally cycle through all the TV or Cable channels (depending on  
which you selected), and store all active channels in the  
channel memory.  
TV  
CABLE  
VCR  
Exit  
EXIT  
While the TV is cycling through the channels, the message CH  
PROGRAMappears.  
6. When channel programming is complete, the message CH  
Completed (channel or cable number)appears.  
7. Press Channel L or M to view the programmed channels.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV/VIDEO  
VOLUME T/S  
CHANNEL s/t  
Adding and erasing channels manually  
After youve programmed the channels, you can add or erase specific  
channels.  
To add or erase channels:  
1. Select the channel you want to add or erase using Channel y or z. If  
adding channels, you must select the channel to add by using the  
Channel Number buttons.  
MENU  
TV/VIDEO VOLUME  
CHANNEL  
T
S
t
s
2. Press MENU, then press x or to highlight the SET UP menu.  
3. Press y or z to highlight ADD/ERASE.  
T/S/t/s  
PICTURE AUDIO  
LANGUAGE:  
SETUP PREFER C.CAPT  
MENU  
[ENGLISH]FRANCAIS  
ESPANOL  
[ANT1]ANT2  
ANT1/2:  
[TV]CABLE  
TV/CABLE:  
CH PROGRAM  
ADD/ERASE:  
MORE  
[ADD]ERASE  
POWER  
RECALL  
MUTE  
SELECT[  
]
4. Press x or to select ADD or ERASE, whichever function you  
2
5
8
3
6
1
4
7
want to perform.  
5. Repeat steps 1-4 for other channels you want to add or erase.  
Channel  
Number  
9
CH RTN  
ENT  
Changing channels  
100  
0
To change the channel, you can:  
CH  
change the programmed channels using the remote control  
select a channel directly using the remote control  
scan the channels using the TV buttons  
Menu/Enter  
MENU/  
ENTER  
VOL  
VOL  
CH  
To change to the next programmed channel:  
TV  
Press Channel y or z on the TV or remote control.  
To change to a specific channel (programmed or unprogrammed):  
Press the Channel Number buttons (0-9 and 100).  
CABLE  
VCR  
Exit  
EXIT  
For example, to select channel 125, press the 100 button, the 2  
button, and the 5 button.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the TVs features  
POWER  
RECALL  
MUTE  
Adjusting the channel settings  
Switching between two channels  
You can switch between two channels without entering an actual  
channel number each time.  
2
5
8
3
6
1
4
7
Channel  
Number  
9
To switch between two channels:  
CH RTN  
ENT  
1. Select the first channel you want to view.  
100  
0
Channel  
Return  
2. Select a second channel with the Channel Number buttons (0-9,  
100).  
CH  
3. Press CH RTN. The previous channel will be displayed.  
MENU/  
ENTER  
VOL  
VOL  
Each time you press CH RTN, the TV will switch back and forth  
between the two channels.  
CH  
Programming your favorite channels  
TV  
CABLE  
VCR  
EXIT  
You can preset up to 12 of your favorite channels using the Favorite  
Channel Programming feature. Because this feature scans through  
only your favorite channels, it allows you to skip other channels you  
do not normally watch.  
You can still use Channel LM to scan through all the channels you  
POWER  
RECALL  
MUTE  
programmed in the TVs memory.  
To program your favorite channels:  
2
5
8
3
6
1
4
7
1. Select a channel you want to program.  
2. Press MENU, then press x or to highlight the SET UP menu.  
3. Press y or z to highlight FAVORITE CH.  
Channel  
Number  
9
CH RTN  
ENT  
100  
0
PICTURE AUDIO  
SETUP PREFER C.CAPT  
CH  
MORE  
V-CHIP CONTROL  
FAVORITE CH  
CH LABEL  
VIDEO LABEL  
TIMER:  
Menu/Enter  
MENU/  
ENTER  
VOL  
VOL  
0 MIN  
DEMO:  
START[STOP]  
CH  
MOVE[  
] START[  
]
4. Press x or to display the FAVORITE CH menu.  
TV  
CABLE  
VCR  
Exit  
EXIT  
SET/CLEAR will be highlighted.  
Favorite  
Channel  
FAV CH  
TV/VIDEO  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
FAVORITE CH  
[SET]CLEAR  
2
0
0
7 14 18  
0
0
0
0
0
0
[TV:CYAN, CABLE:BLUE]  
SELECT[  
]
SET[  
]
5. Press x or to highlight SET and press y or z.  
6. Press EXIT to clear the screen.  
7. Repeat steps 1 through 6 for up to 11 other channels.  
To select your favorite channels:  
Press the FAV CH yz buttons on the remote control to select  
your favorite channels.  
The FAV CH yz buttons will not work until you have pro-  
grammed your favorite channels.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To clear your favorite channels:  
POWER  
RECALL  
MUTE  
1. Select a channel you want to clear.  
2. Press MENU, then press x or to highlight the SET UP menu.  
3. Press y or z to highlight FAVORITE CH.  
4. Press x or to display the FAVORITE CH menu.  
SET/CLEAR will be highlighted.  
2
5
8
3
6
1
4
7
Channel  
Number  
9
CH RTN  
ENT  
100  
0
PICTURE AUDIO  
SETUP PREFER C.CAPT  
CH  
FAVORITE CH  
[SET]CLEAR  
7 14 18  
Menu/Enter  
2
0
0
MENU/  
ENTER  
VOL  
VOL  
0
0
0
0
0
0
[TV:CYAN, CABLE:BLUE]  
CH  
SELECT[  
]
SET[  
]
TV  
CABLE  
VCR  
5. Press the x or to highlight CLEAR.  
Exit  
EXIT  
Favorite  
Channel  
FAV CH  
TV/VIDEO  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
REC TV/VCR STOP PLAY  
FAVORITE CH  
SET[CLEAR]  
7 14 18  
2
0
0
0
0
0
0
0
0
[TV:CYAN, CABLE:BLUE]  
SELECT[  
]
SET[  
]
6. Press y or z until 0replaces the channel number you want  
to erase.  
7. Press EXIT to clear the screen.  
8. Repeat steps 1 through 6 for the other channels.  
Using the V-Chip  
You can prevent others from viewing certain programs or channels by  
using the V-Chip feature.  
Selecting a PIN code  
Before you can block programs and channels, though, you must select  
a personal identification number (PIN) code. The PIN code you  
select prevents others from changing the rating limits you set.  
POWER  
RECALL  
MUTE  
2
5
8
3
6
1
4
7
To select your PIN code and access the V-Chip menus:  
1. Press MENU, then press x or to highlight the SET UP menu.  
2. Press y or z to highlight V-CHIP CONTROL.  
Channel  
Number  
9
CH RTN  
ENT  
100  
0
PICTURE AUDIO  
SETUP PREFER C.CAPT  
CH  
MORE  
V-CHIP CONTROL  
FAVORITE CH  
CH LABEL  
VIDEO LABEL  
TIMER:  
Menu/Enter  
MENU/  
ENTER  
VOL  
VOL  
0 MIN  
DEMO:  
START[STOP]  
CH  
MOVE[  
] START[  
]
TV  
CABLE  
VCR  
Exit  
EXIT  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press x or to display the V-CHIP menu.  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
BLOCKING IS ACTIVE  
- - - -  
PIN CODE  
SELECT [0-9]  
END[EXIT]  
4. Use the Channel Number buttons (0-9) to enter your PIN code.  
If you are accessing the V-Chip menus for the first time, select a  
four-digit number to be your PIN code. Wait 2 seconds for the  
BLOCKING menu to appear.  
Note:  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
If you forget your PIN code, press RECALL four  
times within five seconds from the V-CHIP  
menu. This allows you to proceed to the  
BLOCKING menu and reset your PIN code.  
ENABLE BLOCKING : [Y]N  
SET RATING  
SET BLOCKING OPTIONS  
NEW PIN CODE  
BLOCK CHANNEL  
VIDEO LOCK  
[OFF]  
MOVE[  
] SELECT[  
]
5. You may now enable blocking — “Blocking programs by ratings”  
(see below), Blocking channels(see page 20), To change your  
PIN code(below) or Blocking unrated movies or programs(see  
page 20).  
To change your PIN code:  
POWER  
1. Press MENU, then press x or to highlight the SET UP menu.  
2. Press y or z to highlight V-CHIP CONTROL.  
3. Press x or to display the V-CHIP menu.  
RECALL  
MUTE  
2
5
8
3
6
1
4
7
4. Use the Channel Number buttons (0-9) to enter your PIN code.  
If you are accessing the V-Chip menus for the first time, select a  
four-digit number to be your PIN code. Wait 2 seconds for the  
BLOCKING menu to appear.  
Channel  
Number  
9
CH RTN  
ENT  
100  
0
5. Press y or z to highlight NEW PIN CODE and press x or to  
display the NEW PIN CODE menu.  
CH  
6. Use the Channel Number buttons (0-9) to enter a new code. Wait  
2 seconds for the BLOCKING menu to appear.  
Menu/Enter  
MENU/  
ENTER  
VOL  
VOL  
CH  
7. Press EXIT to return to normal viewing.  
Blocking programs by ratings  
TV  
CABLE  
VCR  
Exit  
EXIT  
The Motion Picture Association of America (MPAA) uses a rating  
system to qualify motion picture content. Television broadcasters  
employ a rating system to qualify the content of television programs,  
as well. The MPAA, Youth TV and TV ratings work with the V-Chip  
feature and allow you to block out programming above the rating  
limits you determine.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MPAA Ratings  
X
For adults only.  
NC17  
R
Not intended for anyone 17 or under.  
Restricted. Under 17 requires an accompanying parent or  
adult guardian.  
PG13  
PG  
Parents strongly cautioned. Some material may be  
inappropriate for children under 13.  
Parental guidance suggested. Some material may not be  
appropriate for children.  
G
General audience. Appropriate for all ages.  
Youth TV Ratings  
Y7, Y7 FV Directed to older children. This program is designed  
for children age 7 and above. For those programs where  
fantasy violence may be more intense or more combative  
than other programs in this category, such programs are  
designated TV-Y7-FV.  
Y
All children. This program is designed to be appropriate  
for all children.  
Note:  
To see the rating of the program you are  
viewing, press RECALL at any time.  
TV Ratings  
MA  
Mature audience only. This program is specifically  
designed to be viewed by adults and therefore may be  
unsuitable for children under 17.  
Language  
Sex  
Crude or indecent language.  
Explicit sexual activity.  
Graphic violence.  
Violence  
14  
PG  
G
Parents strongly cautioned. This program contains some  
material that many parents would find unsuitable for  
children under 14 years of age.  
Dialog  
Language  
Sex  
Intensely suggestive dialog.  
Strong, coarse language.  
Intense sexual situations.  
Intense violence.  
Violence  
Parental guidance suggested. This program contains  
material that parents may find unsuitable for younger  
children.  
Dialog  
Language  
Sex  
Some suggestive dialog.  
Infrequent coarse language.  
Some sexual situations.  
Moderate violence  
Violence  
General audience. Most parents would find this program  
suitable for all ages.  
No DLSV Programs without any Dialog, Language, Sex or Violence  
ratings.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To use the V-Chip to block programs by rating:  
1. Press MENU, then press x or to highlight the SET UP menu.  
2. Press y or z to highlight V-CHIP.  
POWER  
RECALL  
MUTE  
2
5
8
3
6
1
4
7
3. Press x or to display the V-CHIP menu.  
4. Use the Channel Number buttons (0-9) to enter your PIN code.  
If you are accessing the V-Chip menus for the first time, select a  
four-digit number to be your PIN code. Wait 2 seconds for the  
BLOCKING menu to appear.  
Channel  
Number  
9
CH RTN  
ENT  
100  
0
CH  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
Menu/Enter  
MENU/  
ENTER  
VOL  
VOL  
ENABLE BLOCKING : [Y]N  
SET RATING  
SET BLOCKING OPTIONS  
NEW PIN CODE  
CH  
BLOCK CHANNEL  
TV  
VIDEO LOCK  
[OFF]  
CABLE  
VCR  
Exit  
EXIT  
MOVE[  
] SELECT[  
]
5. Press y or z to highlight ENABLE BLOCKING.  
Press x or to highlight ON to enable the V-Chip and  
program blocking by rating.  
Press x or to highlight OFF to disable the V-Chip and  
program blocking by rating.  
6. Press y or z to highlight SET RATING. Then, press x or to  
display the SET RATING menu.  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
MA 14 PG G  
CLASSIF. TV  
MPAA RATING:  
DIALOGUE:  
LANGAGE:  
SEXE:  
X NC17 R PG13 PG G  
VIOLENCE:  
PAS DE DLSV:  
RETOUR AU MENU PUCE  
YOUTH TV RATING  
Y7FV Y7  
Y
TV RATING  
BOUGER[ ] CHOISIR[ ]  
7. Press y or z to highlight MPAA Rating, Youth TV Rating or  
individual TV Ratings.  
Note:  
8. Press x or to select the ratings which will be blocked. Blocked  
ratings are signified by a red X.Unblocked ratings are signified  
by a green .As you block ratings, all ratings higher than the  
ones you select are blocked, as well. For example, if you choose to  
block the MPAA rating R, the higher ratings, NC17 and X, are  
automatically blocked, too.  
Not all programs are rated. To block programs  
or movies that are unrated, see Blocking  
unrated movies or programs,page 20.  
9. When you are done selecting the ratings to be blocked, press  
EXIT to return to normal viewing.  
When you try to view a program with a ratings block, a message will  
appear listing the programs ratings. The program can still be viewed if  
you press MUTE and then enter your PIN code to temporarily bypass  
the block.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Blocking unrated movies or programs  
Some movies and programs are not rated. You can block these movies  
and programs using the V-Chip.  
To block unrated movies or programs:  
1. Press MENU, then press x or to highlight the SET UP menu.  
2. Press y or z to highlight V-CHIP.  
3. Press x or to display the V-CHIP menu.  
4. Use the Channel Number buttons (0-9) to enter your PIN code.  
If you are accessing the V-Chip menus for the first time, select a  
four-digit number to be your PIN code. Wait 2 seconds for the  
BLOCKING menu to appear.  
5. Press y or z to select SET BLOCKING OPTIONS.  
6. Press x or to display the BLOCKING OPTION menu.  
7. Press y or z to highlight MPAA UNRATED.  
Press x or to highlight Y to block unrated movies.  
Press x or to highlight N to unblock unrated movies.  
8. Press y or z to highlight TV NONE RATING.  
Note:  
Blocking television programs with a rating of  
TV NONEmay block emergency messages.  
Press x or to highlight Y to block programs with a rating of  
TV NONE.”  
Press x or to highlight N to unblock programs with a rating  
of TV NONE.”  
9. Press EXIT to return to normal viewing.  
Blocking channels  
You can also choose to block individual channels. These channels will  
not be seen regardless of the ratings of their programming. You can  
choose to block up to four TV channels and four cable channels.  
To block channels:  
1. Use the Channel Number Buttons (0-9) to display the television  
channel you wish to block.  
2. Press MENU, then press x or to highlight the SET UP menu.  
3. Press y or z to highlight V-CHIP and then press x or to display  
the V-CHIP menu.  
4. Use the Channel Number buttons (0-9) to enter your PIN code.  
If you are accessing the V-Chip menus for the first time, choose a  
four-digit number to be your PIN code. Wait 2 seconds for the  
BLOCKING menu to appear.  
POWER  
RECALL  
MUTE  
2
5
8
3
6
1
4
7
5. Press y or z to highlight BLOCK CHANNEL and then press  
x or to display the BLOCK CHANNEL menu.  
Channel  
Number  
9
CH RTN  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
ENT  
100  
0
BLOCK CHANNEL  
SET[CLEAR]  
CH  
0
0
0
0
Menu/Enter  
MENU/  
ENTER  
VOL  
VOL  
SELECT[  
END[EXIT]  
]
SET[  
]
CH  
6. Press x or .  
TV  
CABLE  
VCR  
y or z on SET will set current channel to be blocked.  
Exit  
EXIT  
y or z on CLEAR will clear all channels from the list of blocked  
channels.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Repeat steps 1 through 7 to block other channels. When you are  
finished blocking channels, press EXIT to return to normal  
viewing.  
Note:  
After programming BLOCK CHANNEL,  
change channels before turning off the  
television.  
If you try to display a blocked channel, the TV will not display it, but  
will display the nearest unblocked channel.  
To unblock channels:  
1. Press MENU, then press x or to highlight the SET UP menu.  
2. Press y or z to highlight V-CHIP and then press x or to  
display the V-CHIP menu.  
3. Use the Channel Number buttons (0-9) to enter your PIN code.  
If you are accessing the V-Chip menus for the first time, choose a  
four-digit number to be your PIN code. Wait 2 seconds for the  
BLOCKING menu to appear.  
4. Press y or z to highlight BLOCK CHANNEL and then press  
x or to display the BLOCK CHANNEL menu.  
5. Press x or to highlight CLEAR and clear all channels from the  
list of blocked channels. Press y or z.  
6. Press EXIT to return to normal viewing.  
Video Lock  
Video locks allow the user to lock out the input sources (Video 1,  
Video 2, ColorStream) and channels 3 and 4.  
The possible options are listed below:  
Video: This option blocks out Video 1, Video 2 and ColorStream  
Video+: This option blocks out Video 1, Video 2, ColorStream,  
channels 3 and 4  
Off:  
Disables the video lock feature  
Note: In normal TV viewing, if you cannot access the input  
sources (Video 1, Video 2, ColorStream, Channel 3 or 4)  
please check that this feature has been disabled.  
To setup the video lock, follow the steps below:  
1. Press the MENU button. Press x or to select SETUP.  
2. Press y or z to select the V-Chip Controlmenu item.  
POWER  
RECALL  
MUTE  
2
5
8
3
6
1
4
7
PICTURE AUDIO  
SETUP PREFER C.CAPT  
BLOCKING IS ACTIVE  
- - - -  
Channel  
Number  
9
PIN CODE  
CH RTN  
ENT  
100  
0
SELECT [0-9]  
END[EXIT]  
CH  
Menu/Enter  
3. Press x or to activate the menu. At the prompt, enter the  
correct pin code number to access the V-Chip control menu. See  
the section on V-Chip controlon steps for entering the pin  
code number. (pag e16)  
MENU/  
ENTER  
VOL  
VOL  
CH  
TV  
CABLE  
VCR  
4. If the correct pin code has been entered, press y or z to select the  
Exit  
EXIT  
menu item Video Lock.”  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
ENABLE BLOCKING : [Y]N  
SET RATING  
SET BLOCKING OPTIONS  
NEW PIN CODE  
BLOCK CHANNEL  
VIDEO LOCK  
VIDEO VIDEO+[OFF]  
MOVE[  
] SELECT[  
]
5. Press x or to select the desired level of blocking option. This  
feature is independent of the Enable blockingoption of the V-  
Chip control.  
6. Press the EXIT Button to exit the menu.  
Labeling channels  
Channel labels will appear over the channel number display each time  
you turn on the TV, select a channel, or press the Recall button. You  
can choose any four characters to identify the channels.  
To create channel labels:  
1. Select a channel you want to label.  
2. Press MENU then press x or until the SET UP menu appears.  
3. Press y or z to highlight CH LABEL.  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
MORE  
V-CHIP CONTROL  
FAVORITE CH  
CH LABEL  
VIDEO LABEL  
TIMER:  
0 MIN  
DEMO:  
START[STOP]  
MOVE[  
] START[  
]
4. Press x or to display the CH LABEL menu.  
SET/CLEAR will be highlighted.  
5. Press x or to highlight SET.  
POWER  
RECALL  
MUTE  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
CH LABEL  
SET/CLEAR  
LABEL  
2
5
8
3
6
1
4
7
[SET]CLEAR  
----  
SET UP MENU  
Channel  
Number  
9
MOVE[  
]SELECT[  
]
CH RTN  
ENT  
100  
0
6. Press z to highlight LABEL.  
CH  
Menu/Enter  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
MENU/  
ENTER  
VOL  
VOL  
CH LABEL  
SET/CLEAR  
LABEL  
CH  
[SET]CLEAR  
----  
SET UP MENU  
TV  
CABLE  
VCR  
Exit  
EXIT  
MOVE[  
]SELECT[  
]
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. Assign the label to the channel. Press x or to enter a character  
in the first space. Press the button repeatedly until the character  
you want appears on the screen. Press ENTER.  
8. Repeat step 7 to enter the rest of the characters.  
If you would like a blank space in the label name, you must  
choose an empty space from the list of characters. Otherwise, a  
dash will appear in that space.  
9. Press EXIT to clear the screen.  
10. Repeat steps 1 through 8 for other channels. You can assign up to  
32 labels.  
To erase channel labels:  
1. Select a channel with a label.  
2. Press MENU then press x or until the SET UP menu appears.  
3. Press y or z to highlight CH LABEL.  
4. Press x or to display the CH LABEL menu.  
SET/CLEAR will be highlighted.  
5. Press x or to highlight CLEAR.  
6. Press ENTER.  
7. Repeat steps 1 through 6 to erase other channel labels.  
Video Label  
This feature allows you to rename the input sources for your TV. The  
available video label names include -, VCR, DVD, DTV,  
SATand CBLwhere the symbol denotes the following:  
: uses the default label name  
VCR: Video Cassette Recorder  
DVD: Digital Video Disc or Digital Versatile Disc  
SAT: Satellite box  
DTV: Digital TV Set Top Box  
CBL: Cable box  
To setup your own video label names, follow the steps below:  
1. Press the MENU button  
2. Press x or to select the SETUP menu.  
POWER  
3. Press y or z to highlight the Video labelmenu item, then press  
RECALL  
MUTE  
x or .  
2
5
8
3
6
1
4
7
PICTURE AUDIO  
SETUP PREFER C.CAPT  
Channel  
Number  
9
VIDEO LABEL  
VIDEO1 - VCR DVD DTV[SAT]CBL  
VIDEO2  
CH RTN  
ENT  
100  
0
ColorStream  
SET UP MENU  
CH  
MOVE[  
] SELECT[  
]
Menu/Enter  
MENU/  
ENTER  
VOL  
VOL  
4. Press y or z to select the input source. Then, press x or to label  
the input source selected.  
CH  
5. Finish labeling the other video sources as desired. To return to the  
previous menu, press y or z to highlight the SET UP MENU”  
and press x or . To exit the menu, press the EXIT button.  
TV  
CABLE  
VCR  
Exit  
EXIT  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching picture-in-picture (PIP)  
The picture-in-picture (PIP) feature allows you to watch two pictures  
at the same time. The smaller picture can be a TV broadcast or come  
from an external source, such as a VCR.  
To display a TV broadcast as a small picture:  
1. Turn on the TV and select the program you want to watch.  
2. Press the PIP button once to display a small picture. A window  
1/9 the size of the screen will appear. Press PIP a second time to  
display a 1/16 size window.  
1/16  
1/9  
POWER  
RECALL  
MUTE  
PIP  
7
2
5
8
3
6
1
4
7
Channel  
Number  
9
3. Press PIP CH yz to choose the program you want to be dis-  
CH RTN  
played as a small picture.  
ENT  
100  
0
To display a picture from an external source as a small picture:  
1. Make sure you have connected the external source equipment  
properly. For more information, see the Connecting your TV”  
on page 2.  
CH  
MENU/  
ENTER  
VOL  
VOL  
2. Turn on the TV and select the program you want to watch.  
CH  
3. Press the PIP button once to display a small picture. A window  
1/9 the size of the screen will appear. Press PIP a second time to  
display a 1/16 size window.  
TV  
CABLE  
VCR  
EXIT  
4. Press SOURCE repeatedly to select the input source (VIDEO 1  
or VIDEO 2) for the small picture. The selected source will be  
displayed in purple. ColorStream cannot be selected.  
FAV CH  
TV/VIDEO  
REC TV/VCR STOP PLAY  
STILL SOURCE PIP  
Source  
PIP  
SLOW PAUSE REW  
FF  
PIP CH LOCATE SWAP  
PIP CH z y  
PIP  
TV  
VIDEO 1  
VIDEO 2  
TO SELECT PUSH SOURCE  
Note:  
To turn PIP off:  
PIP cannot be turned on when the  
ColorStream input is being viewed.  
Press PIP once or twice, depending on the size of the small  
picture screen you selected.  
You cannot display the signal sources input  
through the ANT-2 terminal as a small picture.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Switching the main and small pictures  
Press SWAP while you are using the PIP feature to switch the main  
and small pictures. The main and small pictures will switch each time  
you press the SWAP button.  
Changing the position of the small picture  
Press LOCATE repeatedly while you are watching a small picture.  
The display position of the small picture will change in the following  
order:  
Freezing the small picture  
Press STILL while you are watching a small picture. The small picture  
will become a still picture. To return to the moving picture, press  
STILL again.  
POWER  
RECALL  
MUTE  
2
5
8
3
6
1
4
7
9
CH RTN  
ENT  
100  
0
Still  
CH  
MENU/  
ENTER  
VOL  
VOL  
Watching multi-window PIP  
CH  
Multi-window PIP appears as six small boxes across the bottom of the  
screen. You must program channels first (see page 13, Programming  
channels automatically).  
TV  
CABLE  
VCR  
EXIT  
The TV cycles through all of the programmed channels and shows a  
few seconds of each channels programming, then freezes the image  
and moves onto the next channel in a continuous cycle. The channel  
numbers appear above each PIP window. The LOCATE, SWAP, PIP  
CHANNEL yz, SOURCE and STILL buttons do not work with  
this PIP feature.  
FAV CH  
TV/VIDEO  
REC TV/VCR STOP PLAY  
STILL SOURCE PIP  
Still  
Swap  
Locate  
PIP CH z y  
SLOW PAUSE REW  
FF  
PIP CH LOCATE SWAP  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To view the multi-window picture-in-picture (PIP) feature:  
Press PIP three times.  
14  
23  
27  
30  
43  
56  
To turn multi-window PIP off:  
Press PIP again or change the channel using the CH yz buttons.  
Adjusting the picture  
MENU  
MENU  
RECALL  
TV/VIDEO VOLUME  
CHANNEL  
T
S
t
s
Adjusting the picture quality  
You can adjust the picture quality to your personal preferences,  
including the contrast, brightness, color, tint, and sharpness. The  
qualities you choose will be stored automatically in your TVs memory  
so you can recall them at any time.  
T/S/t/s  
To adjust the picture quality:  
1. Press MENU, then press x or to highlight the PICTURE  
menu.  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
POWER  
MUTE  
CONTRAST  
--------------|+  
BRIGHTNESS -------|-------+  
SHARPNESS -------|-------+  
COLOR  
TINT  
RESET  
-------|-------+  
-------|-------+  
2
5
8
3
6
1
4
7
SELECT[  
]
9
CH RTN  
2. Press y or z until the item you want to adjust is highlighted.  
ENT  
100  
0
3. Press x or to adjust the level.  
The PICTURE items you have adjusted will be stored in the TVs  
memory automatically. You can keep these settings or choose preset  
options under the PREFERENCES menu. (See Selecting the color  
temperatureand Adjusting the picture preferences,below and on  
page 27.)  
CH  
Menu/Enter  
MENU/  
ENTER  
VOL  
VOL  
CH  
TV  
CABLE  
VCR  
Exit  
Selection  
contrast  
brightness  
color  
tint  
sharpness  
Pressing  
lower  
EXIT  
higher  
lighter  
darker  
paler  
Note:  
deeper  
greenish  
sharper  
To reset the picture adjustments to the factory  
settings, select RESET from the PICTURE  
menu.  
reddish  
softer  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the color temperature  
You can change the quality of the picture by selecting from three  
preset color temperatures: cool, medium, and warm.  
To select the color temperature:  
1. Press MENU, then press x or to highlight the  
PREFERENCES menu.  
2. Press y or z to highlight COLOR TEMPERATURE.  
3. Press x or to highlight the mode you want.  
Mode  
cool  
Picture Quality  
blueish  
medium  
warm  
neutral  
reddish  
Adjusting the picture preferences  
You can select your desired picture type from three preset picture  
modes: Sports, Standard, and Movie.  
To select the picture preferences:  
1. Press MENU, then press x or to highlight the  
PREFERENCES menu.  
2. Press y or z to highlight PICTURE PREFERENCES.  
3. Press x or to highlight the mode you want.  
The table below describes the effects of the different preferences.  
TV/VIDEO  
Mode  
Picture Quality  
sports  
standard  
movie  
bright and dynamic picture (factory setting)  
standard picture setting  
movie-like picture setting  
your personal preference*  
memory  
POWER  
*(see Adjusting the picture qualityon page 26)  
MENU  
TV/VIDEO VOLUME  
CHANNEL  
T
S
t
s
Watching video input  
You can use the TV/VIDEO button on the remote control or the TV/  
VIDEO button on the TV to view a signal coming from other devices,  
such as VCRs or video disc players that may be connected to your TV.  
(See Connecting your TVon page 2.)  
Recall  
Power  
POWER  
RECALL  
MUTE  
2
5
8
3
6
1
4
7
Displaying on-screen information  
Press RECALL to display the following on-screen information:  
Antenna mode (when in TV mode)  
Channel number or VIDEO mode selected  
Channel label (if preset)  
9
CH RTN  
ENT  
100  
0
CH  
Stereo or SAP (second audio program) audio status  
V-Chip rating status  
yz x •  
MENU/  
ENTER  
VOL  
VOL  
Menu  
CH  
Setting the off-timer  
TV  
CABLE  
VCR  
You can set the TV so it turns off automatically.  
To set the off-timer:  
Exit  
EXIT  
FAV CH  
TV/VIDEO  
1. Press MENU, then press x or to select the SET UP menu.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Press y or z to select the TIMER.  
3. Press x or to select the off time (10-180 minutes, in 10-minute  
increments).  
4. Press EXIT to exit the menu.  
To cancel the off-timer:  
Press POWER twice, once to turn the TV off, and once to turn it  
on again.  
Auto power off  
The TV will automatically turn itself off after approximately 15  
minutes if it is tuned to a vacant channel or if a station completes its  
broadcast for the day and stops broadcasting on that channel. This  
feature, however, does not work in the VIDEO mode.  
Using the closed caption feature  
POWER  
RECALL  
MUTE  
You have two options with the closed caption feature: captions or text.  
A caption is a printed version of the dialogue, narration and/or sound  
effects of a TV program. Text is information not related to the  
program that appears on half of the TV screen.  
2
5
8
3
6
1
4
7
To view captions or text:  
9
CH RTN  
1. Select the desired program. The captioned programs are usually  
ENT  
100  
0
marked in your local TV listing by CC.”  
2. Press MENU, then press x or until the C.CAPT menu appears.  
CH  
Menu/Enter  
MENU/  
ENTER  
VOL  
VOL  
PICTURE AUDIO  
C.CAPT:  
SETUP PREFER C.CAPT  
CH  
C1 C2 C3 C4 T1  
T2 T3 T4[OFF]  
TV  
CABLE  
VCR  
Exit  
EXIT  
SELECT[  
]
Note:  
3. Press y or z to highlight C.CAPT.  
A closed caption signal may not be decoded  
in the following situations:  
PICTURE AUDIO  
C.CAPT:  
SETUP PREFER C.CAPT  
when a video tape has been dubbed  
when the signal reception is weak  
C1 C2 C3 C4 T1  
T2 T3 T4[OFF]  
when the signal reception is non-  
standard  
When you choose a closed captioned channel  
and the text mode, the text screen always  
appears. When there is no signal, however,  
the text screen will not display text characters.  
SELECT[  
]
4. Press x or to select the closed caption mode.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select C1, C2, C3, or C4 to view captions. Select C1 for  
translation of the primary language in your area.  
The top of the mountain is covered  
with snow all the year round.  
Select T1, T2, T3, or T4 to view Text.  
WORLD WEATHER  
Temps  
F
Current  
Weather  
Clear  
C
LONDON  
MOSCOW  
PARIS  
51  
11  
14  
12  
19  
18  
57  
Cloudy  
Clear  
53  
66  
ROME  
TOKYO  
Cloudy  
Rain  
65  
5. To turn off the closed-captioned feature, select OFF in step 4.  
Adjusting the sound  
Mute  
POWER  
Muting the sound  
RECALL  
MUTE  
Press MUTE to temporarily turn off the sound. While the sound is  
off, the screen will display the word MUTE in the lower right-hand  
corner. To restore the sound, press MUTE again.  
2
5
8
3
6
1
4
7
When you press the MUTE button, you automatically activate the  
closed caption feature. To deactivate this feature, press the MUTE  
button again. This feature only works when the closed caption mode is  
set to off. See Using the closed captioned featureon page 28 for  
more information.  
9
CH RTN  
ENT  
100  
0
CH  
Selecting stereo/SAP broadcasts  
MENU/  
ENTER  
VOL  
VOL  
You can enjoy watching TV while you listen to high-fidelity stereo  
sound with the Multi-channel TV Sound (MTS) feature. MTS can  
also transmit a second audio program (SAP) containing a second  
language or other audio information.  
CH  
TV  
CABLE  
VCR  
EXIT  
When the TV receives a stereo or SAP broadcast, the word STEREO  
or SAP appears on the screen when the TV is on, you change the  
channel, or press the RECALL button.  
The MTS feature is not available while in the VIDEO mode.  
To listen to stereo sound:  
1. Press MENU, then press x or until the AUDIO menu appears.  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
MTS:  
[STR]SAP MONO  
BASS  
TREBLE  
BALANCE  
-------|-------+  
-------|-------+  
-------|-------+  
SURROUND: ON[OFF]  
SELECT[  
]
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. Press y or z to highlight MTS.  
3. Press x or to highlight STR.  
POWER  
RECALL  
MUTE  
2
5
8
3
6
1
4
7
PICTURE AUDIO  
SETUP PREFER C.CAPT  
MTS:  
[STR]SAP MONO  
BASS  
TREBLE  
BALANCE  
-------|-------+  
-------|-------+  
-------|-------+  
9
CH RTN  
SURROUND: ON[OFF]  
ENT  
100  
0
SELECT[  
]
CH  
When you are watching a stereo broadcast, the word STR is  
displayed in yellow. You should leave your TV set to STEREO so  
you can automatically receive stereo or monaural sound, depend-  
ing on the broadcast type. If the stereo sound is noisy, select  
MONO to reduce the noise. The word STR or SAP is displayed  
in yellow when the TV receives the signal, and in purple when  
you have selected the feature.  
Menu/Enter  
MENU/  
ENTER  
VOL  
VOL  
CH  
TV  
CABLE  
Exit  
VCR  
EXIT  
To listen to a second audio program:  
1. Press MENU, then press x or until the AUDIO menu appears.  
2. Press y or z to highlight MTS.  
3. Press x or to highlight SAP. You will hear only the second audio  
program from the left and right speakers.  
Adjusting the sound quality  
You can change the sound quality of your TV by adjusting the bass,  
treble, and balance.  
To adjust the sound quality:  
1. Press MENU, then press x or until the AUDIO menu appears.  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
MTS:  
[STR]SAP MONO  
BASS  
TREBLE  
BALANCE  
-------|-------+  
-------|-------+  
-------|-------+  
SURROUND: ON[OFF]  
SELECT[  
]
2. Press y or z to highlight the item you want to adjust.  
3. Press x or to adjust the level.  
Note:  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
To reset the audio adjustments to the factory  
settings, select RESET from the PICTURE  
menu.  
MTS:  
BASS  
TREBLE  
BALANCE  
[STR]SAP MONO  
-------|-------+  
-------|-------+  
-------|-------+  
SURROUND: ON[OFF]  
SELECT[  
]
x makes the sound quality weaker or decreases the balance in  
the right channel, depending on the item selected.  
makes the sound quality stronger or decreases the balance  
in the left channel, depending on the item selected.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the surround sound feature  
The surround sound feature expands the audio listening field wider and  
deeper to create exceptional sound quality from the TVs speakers. The  
feature uses stereo signals from a TV broadcast or video input.  
To turn on the surround sound feature:  
1. Select the STEREO mode following the steps under Selecting  
stereo/SAP broadcastson page 29.  
2. Press MENU, then press x or until the AUDIO menu appears.  
3. Press y or z to highlight SURROUND.  
4. Press x or to highlight ON.  
PICTURE AUDIO  
SETUP PREFER C.CAPT  
MTS:  
[STR]SAP MONO  
BASS  
TREBLE  
BALANCE  
-------|-------+  
-------|-------+  
-------|-------+  
SURROUND: ON[OFF]  
SELECT[  
]
To turn off the surround sound feature:  
Choose OFF in step 4 above.  
In general, you should leave your TV set to SURROUND so it  
can automatically produce surround stereo or monaural sound,  
depending on the broadcast type.  
Viewing the demonstration mode  
The demonstration mode (DEMO) is an option available on the  
SET UP menu. If you select this mode, the TV will demonstrate  
several of the TVs features.  
To stop the demonstration mode:  
Select DEMO STOP in the SET UP menu, or press the  
RECALL, EXIT, or POWER buttons.  
Understanding the last mode memory feature  
If the power is cut off while you are viewing the TV and the power  
is resupplied, the last mode memory feature will turn the TV on  
automatically.  
If the power is going to be off for a long time or you are going to be  
away from home for a long time, remove the power plug from the wall  
outlet to prevent the TV from turning on in your absence.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Cleaning and care  
WARNING:  
TV sets use high voltage. Do not try to remove the cabinet back. Refer servicing to qualified service technicians.  
To clean the TV screen:  
1. Unplug the TV to avoid possible shock hazard.  
2. Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water  
to clean the TV screen and trim. Do not use too much water because water spills into the cabinet can cause  
damage to the TV.  
3. Wipe off any excess moisture with a clean dry cloth.  
4. Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.  
Caution:  
Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet. These chemicals can damage the finish  
of the cabinet.  
Troubleshooting  
Before calling a service technician, please check the following table for a possible cause of the problem and  
some solutions.  
Problem  
Solution  
TV will not turn on  
Make sure the power cord is plugged in, then press POWER.  
The remote control batteries may be dead. Replace the batteries.  
No picture, no sound  
No sound, picture OK  
Check the antenna/cable connections.  
The sound may be muted. Press VOLUME.  
The station may have broadcast difficulties. Try another channel.  
Poor sound, picture OK  
Poor picture, sound OK  
The station may have broadcast difficulties. Try another channel.  
Check the antenna connections.  
The station may have broadcast difficulties. Try another channel.  
Adjust the PICTURE menu.  
Poor reception of broadcast channels  
Cannot receive above channel 13  
The station may have broadcast difficulties. Try another channel.  
Check the antenna connections.  
If you are using a VCR, make sure the TV/VCR button is set  
correctly.  
Make sure TV/CABLE is set to TV mode.  
Unable to select a certain channel  
or video input  
The channel may be locked out with the channel lock feature, video  
lock feature, or erased with the add/erase feature.  
Multiple images  
The station may have broadcast difficulties. Try another channel.  
Use a highly directional outdoor antenna.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Poor color or no color  
The station may have broadcast difficulties. Try another channel.  
Adjust the TINT and/or COLOR in the PICTURE menu.  
If you change the direction of the TV while it is turned on, the  
picture could suffer from color shading. If so, turn off the TV and  
allow it to cool down for several hours before turning it on again.  
No stereo or SAP sound from a  
known MTS broadcast  
Make sure the MTS feature is set properly.  
The remote control does not operate  
Check if the TV/CABLE/VCR switch is properly set.  
There may be an obstruction between the remote control and the  
remote control sensor.  
The remote control batteries may be dead. Replace the batteries.  
The V-Chip PIN code does not work  
Change or reset your PIN code. (See page 16, Selecting a PIN  
code.)  
Specifications  
Television system  
Channel coverage  
NTSC standard  
VHF: 2 through 13  
UHF: 14 through 69  
Cable TV: mid band (A-8 through A-1, A through 1)  
super band (J through W)  
hyper band (AA through ZZ, AAA, BBB)  
ultra band (65 through 94, 100 through 125)  
120 AC, 60 Hz  
Power source  
Power consumption  
Audio power  
104 W  
5 W + 5 W  
Speaker type  
2-3/8 x 4-3/4 inches (60 x 120 mm)  
S-VIDEO INPUT  
Video/Audio terminals  
Y-INPUT: 1 V (p-p), 75 ohm, negative sync.  
C-INPUT: 0.286 V (p-p) (burst signal), 75 ohm  
VIDEO/AUDIO INPUT  
VIDEO: 1 V (p-p), 75 ohm, negative sync.  
AUDIO: 150 mV (rms) (30% modulation equivalent, 47 k ohm)  
VIDEO/AUDIO OUTPUT  
VIDEO: 1 V (p-p), 75 ohm, negative sync.  
AUDIO: 150 mV (rms) (30% modulation equivalent, 47 k ohm)  
Width: 34-9/16 inches (878 mm)  
Height: 30-1/2 inches (774 mm)  
Depth: 25-5/16 inches (642 mm)  
158.0 lbs. (71.6 kg)  
Dimensions  
Weight  
Supplied accessories  
Optional TV stand  
Remote control with two size AAbatteries  
ST3615  
Design and specifications are subject to change without notice.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited United States warranty  
Toshiba America Consumer Products, Inc. (TACP) and Toshiba Hawaii Inc. (THI) make the following  
limited warranties. These limited warranties extend to the original consumer purchaser or any person receiving  
this set as a gift from the original consumer purchaser and to no other purchaser or transferee.  
Limited one-year warranty  
TACP and THI warrant this product and its parts against defects in materials or workmanship for a period of  
one (1) year after the date of original retail purchase. During this period, TACP and THI will repair or replace a  
defective part, at their option, with a new or refurbished part, without charge to you. Authorized TACP/THI  
service station personnel will come to your home when warranty service is required. Depending on the type of  
repair required, the service will either be performed in your home or the set will be taken to the authorized  
TACP/THI service station for repair and returned to your home at no cost to you.”  
Limited two-year warranty of picture tube  
TACP and THI further warrant the picture tube in this product against defects in materials or workmanship for  
a period of two (2) years after the date of original retail purchase. During this period, TACP and THI will repair  
or replace a defective picture tube at their option, with a new or refurbished picture tube, without charge to you,  
except that if a defective picture tube is replaced after one (1) year from the date of the original retail purchase,  
you pay labor charges involved in the replacement.  
Rental units  
The warranty for rental units begins with the first rental of thirty (30) days from the date of shipment to the  
rental firm, whichever comes first.  
Commercial units  
Products sold and used for commercial use have a limited ninety (90) day warranty for all parts, labor and picture  
tube.  
Owners manual and registration card  
You should read this owners manual thoroughly before operating this product. You should complete and mail  
the enclosed registration card within ten days after you, or the person who has given you this product as a gift,  
purchased this product. This is one way to enable TACP/THI to provide you with better customer service and  
improved products. Failure to return the registration card will not affect your rights under this warranty.  
Your responsibility  
The above warranties are subject to the following conditions:  
You must retain your bill of sale or provide other proof of purchase.  
All warranty servicing of this product must be made by an Authorized TACP/THI Service Station.  
These warranties are effective only if the product is purchased and operated in the U.S.A. or Puerto Rico.  
Labor service charges for set installation, set up, adjustment of customer controls and installation or repair of  
antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems  
are your responsibility.  
Warranties extend only to defects in materials or workmanship as limited above and do not extend to any  
product or parts which have been lost or discarded by you or to damage to products or parts caused by  
misuse, accident, damage caused by Acts of God, such as lightning or fluctuations in electric power, im-  
proper installation, improper maintenance or use in violation of instructions furnished by us; or to units  
which have been modified or had the serial number removed, altered, defaced or rendered illegible.  
How to obtain warranty service  
If after following all of the operating instructions in this manual and checking the section Troubleshooting,”  
you find that service is needed;  
Call the TACP toll free number 1-800-631-3811 after you find a defective product or part to find the  
nearest Toshiba Authorized Service Station.  
Please present your bill of sale or other proof to the Authorized Service Station.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Authorized TACP/THI service station personnel will come to your home when warranty service is required.  
Depending on the type of repair required, the service will either be performed in your home or the set will be  
taken to the TACP/THI Authorized service station for repair and returned to your home at no cost to you.  
In Hawaii  
If your TV requires service, call:  
(808) 591-9281  
327 Kamakee Street, Honolulu, HI 96814  
Limitations  
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particu-  
lar purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of  
any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other  
warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or  
replacement of any parts. In no event shall TACP or THI be liable for consequential or incidental damages.  
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these  
warranties in any manner whatsoever. The time within which action must be commenced to enforce any obliga-  
tion of TACP or THI arising under this warranty or under any statute, or law of the United States or any state  
thereof, is hereby limited to 90 days from the date you discover or should have discovered, the defect. This  
limitation does not apply to implied warranties arising under state law.  
This warranty gives you specific legal rights and you may also have other rights which may vary from state to  
state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be  
brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may not  
apply to you.  
Attention Canadian customers  
Canadian consumers are requested to complete the special Canadian Warranty Registration Formenclosed,  
and forward this completed form with a copy of bill of sale to TOSHIBA OF CANADA to Register and  
Validatetheir warranty.  
Products purchased in the U.S.A. and used in Canada are not covered by these warranties.  
Products purchased in Canada and used in the U.S.A. are not covered by these warranties.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
connecting  
A
audio amplifier................................................................... 6  
cable converter box ......................................................... 3  
cable converter box and a VCR .................................. 3  
camcorder ........................................................................... 6  
DVD with ColorStream and a VCR ............................ 4  
DVD/satellite receiver and a VCR.............................. 4  
TV ............................................................................................ 2  
VCR ........................................................................................ 2  
VCRs, two ............................................................................ 5  
adding and erasing channels manually .....................14  
adding channels to the TV’s memory..........................13  
adjusting  
channel settings..............................................................15  
picture preferences .......................................................26  
picture quality ..................................................................25  
sound...................................................................................28  
antenna input, selecting ...................................................12  
audio amplifier, connecting............................................... 6  
auto power off ......................................................................26  
D
demonstration mode, viewing ....................................... 30  
displaying on-screen information.................................26  
DVD with ColorStream and a VCR, connecting ........ 4  
DVD/satellite receiver and a VCR, connecting ......... 4  
B
batteries, installing into the remote control ............... 7  
blocking  
channels .............................................................................20  
programs by ratings ......................................................17  
unrated movies or programs......................................20  
F
favorite channels, programming ...................................15  
freezing the small picture (PIP) .....................................24  
C
L
cable converter box and a VCR, connecting.............. 3  
cable converter box, connecting..................................... 3  
cable TV converter code table ......................................... 9  
camcorder, connecting ....................................................... 6  
care and cleaning of your TV ........................................ 31  
changing  
labeling channels ................................................................21  
language, changing the on-screen display ..............12  
last mode memory feature, understanding.............. 30  
location for TV, selecting .................................................... 1  
channels .............................................................................14  
on-screen display language.......................................12  
position of the small picture (PIP) ...........................23  
channel settings, adjusting .............................................15  
channels  
adding or erasing manually........................................14  
adding to the TV's memory ........................................13  
blocking with V-Chip.....................................................20  
changing ............................................................................14  
favorite, programming ..................................................15  
labeling ...............................................................................21  
programming automatically .......................................13  
switching between two ................................................15  
cleaning and care of your TV ........................................ 31  
closed caption feature, using .........................................27  
code table  
M
multi-window PIP ................................................................24  
muting the sound ................................................................28  
O
off-timer, setting ..................................................................26  
on-screen display language, changing ......................12  
on-screen information, displaying................................26  
P
picture  
adjusting ............................................................................24  
color temperature, selecting ......................................25  
preferences, adjusting ..................................................26  
quality, adjusting .............................................................25  
picture-in-picture (PIP)  
cable TV converter ........................................................... 9  
VCR ........................................................................................ 9  
color temperature, adjusting...........................................25  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
changing the position of the small picture ..........23  
freezing the small picture............................................24  
main and small pictures, switching.........................23  
watching.............................................................................22  
watching multi-window ...............................................24  
PIN code, selecting.............................................................16  
power, auto off......................................................................26  
programming  
T
troubleshooting ................................................................... 31  
TV  
connecting........................................................................... 2  
location, selecting ............................................................ 1  
setting up ...........................................................................12  
TV/VIDEO button, using ...................................................12  
channels automatically ................................................13  
favorite channels ............................................................15  
remote control for use with a VCR  
or cable TV converter................................................. 8  
programs, blocking with V-Chip....................................17  
V
V-Chip  
blocking channels ..........................................................20  
blocking programs by ratings....................................17  
selecting a PIN code .....................................................16  
using ....................................................................................16  
VCR and a cable converter box, connecting.............. 3  
VCR and a DVD with ColorStream, connecting ........ 4  
VCR and a DVD/satellite receiver, connecting.......... 4  
VCR, connecting .................................................................... 2  
VCRs, connecting two ......................................................... 5  
video input, watching ........................................................26  
video labeling........................................................................23  
video lock ...............................................................................21  
R
ratings  
blocking programs by ...................................................17  
MPAA ..................................................................................18  
TV ..........................................................................................18  
unrated movies or programs......................................20  
youth TV .............................................................................18  
remote control  
batteries, installing........................................................... 7  
learning about..................................................................11  
preparing for use .............................................................. 7  
programming for use with a VCR  
or cable TV converter................................................. 8  
using ...................................................................................... 7  
using with a VCR or cable TV converter ................. 7  
W
warranty ..................................................................................33  
watching  
multi-window picture-in-picture (PIP)...................24  
picture-in-picture (PIP) ................................................22  
video input.........................................................................26  
S
SAP, selecting .......................................................................28  
satellite receiver/DVD and a VCR, connecting ......... 4  
sound  
adjusting ............................................................................28  
muting .................................................................................28  
stereo/SAP broadcasts, selecting............................28  
surround, using ...............................................................29  
specifications ........................................................................32  
stereo sound, selecting .....................................................28  
surround sound, using ......................................................29  
switching between two channels .................................15  
switching the main and small pictures (PIP) ...........23  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Toshiba America  
Consumer Products, Inc.  
Head Office  
National Service Division  
82 Totowa Road  
Wayne, NJ 07470  
1420B Toshiba Drive  
Lebanon, TN 37087  
Head Office  
Toshiba Hawaii, Inc.  
327 Kamakee Street  
Honolulu, HI 96814  
Toshiba of Canada, Ltd.  
Head Office  
Service Centers  
191 McNabb Street  
Markham, Ontario L3R 8H2  
Canada  
Toronto  
191 McNabb Street  
Markham, Ontario L3R 8H2  
Canada  
Tel: (905) 470-5400  
Montreal  
1643 North Service Road  
Trans-Canada Highway  
Dorval, Quebec H9P 1J1  
Canada  
Tel: (514) 856-4100  
Vancouver  
22171 Fraserwood Way  
Richmond, British Columbia V6W 1J5  
Tel: (604) 303-2500  
Manufactured by:  
Toshiba America  
Consumer Products, Inc.  
PRINTED IN USA  
(01-06)B  
23565271  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Teac Stereo System TD X250I User Manual
Toshiba Personal Computer L310 User Manual
Toshiba Printer DRJST 51 User Manual
Toshiba Security Camera IKWB81A User Manual
TP Link Network Card TL PA4010P User Manual
Traulsen Refrigerator TR35786 User Manual
Tricity Bendix Cooktop SIE454 User Manual
Tripp Lite TV Cables N201 007 OR User Manual
Uniden Cell Phone D1364 User Manual
Universal Power Group Car Stereo System 04 0686B User Manual