OWNER'S MANUAL
Color Television
I
Owner's Record
The model number and serial number are on the back
of your TV. Record these numbers in the spaces below.
Refer to these numbers whenever you communicate
with your Toshiba dealer about this TV.
32HF73
36HF73
Model number:
Serial number:
23565661
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Installation, Care, and Service
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
Installation
Follow these recommendations and precautions and heed all
warnings when installing your TV:
4) Follow all instructions.
16) Never modify this equipment. Changes or modifications
may void: a) the warranty, and b) the user’s authority to
operate this equipment under the rules of the Federal
Communications Commission.
5) Do not use this apparatus near
water.
17)
DANGER: RISK OF SERIOUS PERSONAL
INJURY, DEATH, OR EQUIPMENT
DAMAGE! Never place the TV on
6) Clean only with a dry cloth.
an unstable cart, stand, or table. The TV
may fall, causing serious personal injury,
death, or serious damage to the TV.
7) Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
18) Never place or store the TV in direct
sunlight; hot, humid areas; areas
subject to excessive dust or vibration;
or locations with temperatures at or
below 41°F (5°C).
8) Do not install near any heat
sources such as radiators,
heat registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has
two blades and a third grounding
19) Always place the TV on the floor
or a sturdy, level, stable surface that
can support the weight of the unit.
Wide plug
prong. The wide blade or the third
prong are provided for your safety.
If the provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete outlet.
20) Never place items such as vases,
aquariums, or candles on top of the TV.
10) Protect the power cord from being
walked on or pinched, particularly at
plugs, convenience receptacles, and
the point where it exits the apparatus.
11) Only use attachments/accessories specified by the
21) Never block or cover the slots or
openings in the TV cabinet back,
bottom, and sides. Never place
the TV:
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
• on a bed, sofa, rug, or similar
surface;
• too close to drapes, curtains,
or walls; or
apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
• in a confined space such as a
bookcase, built-in cabinet, or any
other place with poor ventilation.
The slots and openings are provided
to protect the TV from overheating
and to help maintain reliable
operation of the TV.
13) Unplug this apparatus during
lightning storms or when
unused for long periods
of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power supply
cord or plug is damaged, liquid has
22) Never allow anything to rest on or roll over the power
cord, and never place the TV where the power cord is
subject to wear or abuse.
been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not
QUALIFIED
SERVICE
operate normally, or has been dropped.
TECHNICIAN
23) Never overload wall outlets and
extension cords.
15) CAUTION: To reduce the risk of electric shock, do not
use the polarized plug with an extension cord, receptacle,
or other outlet unless the blades can be inserted
completely to prevent blade exposure.
0303
3
Download from Www.Somanuals.com. All Manuals Search And Download.
30) [This item applies to projection TVs only.] If the air
temperature rises suddenly (for example, when the TV is
first delivered), condensation may form on the lenses. This
can make the picture appear distorted or the color appear
faded. If this happens, turn off the TV for 6 to 7 hours to
allow the condensation to evaporate.
24) Always operate this equipment from
a 120 VAC, 60 Hz power source only.
31) For added protection of your TV from lightning and power
surges, always unplug the power cord and disconnect the
antenna from the TV if you leave the TV unattended or
unused for long periods of time.
25) Always make sure the antenna system is properly
grounded to provide adequate protection against voltage
surges and built-up static charges (see Section 810 of the
National Electric Code).
Antenna lead-in wire
32) During normal use, the TV may make
occasional snapping or popping
Antenna discharge unit
(NEC Section 810-20)
Ground clamp
sounds. This is normal, especially
when the unit is being turned on or
off. If these sounds become frequent
or continuous, unplug the power cord
and contact a Toshiba Authorized Service Center.
Grounding conductors
(NEC Section 810-21)
Electric service equipment
Power service grounding
33) Possible Adverse Effects on TV Picture Tube: If a fixed
(non-moving) pattern remains on the TV screen for long
periods of time, the image can become permanently
engrained in the picture tube and cause subtle but
permanent ghost images. This type of damage is NOT
COVERED BY YOUR WARRANTY. Never leave your TV
on for long periods of time while it is displaying the
following formats or images:
electrode system (NEC Art 250 Part H)
Ground clamps
26)
DANGER: RISK OF SERIOUS PERSONAL
INJURY OR DEATH!
• Use extreme care to make sure you are never in
a position where your body (or any item you are in contact
with, such as a ladder or screwdriver) can accidentally
touch overhead power lines. Never locate the antenna
near overhead power lines or other electrical circuits.
• Never attempt to install any of the following during
lightning activity:
a) an antenna system; or b) cables, wires, or any home
theater component connected to an antenna or phone
system.
• Fixed Images, such as PIP/POP windows, stock tickers,
video game patterns, TV station logos, and websites.
• Special Formats that do not use the entire screen. For
example, viewing letterbox style (16:9) media on a
normal (4:3) display (gray bars at top and bottom of
screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (gray bars on left and right
sides of screen).
Care
Service
34)
For better performance and safer operation of your TOSHIBA
TV, follow these recommendations and precautions:
WARNING: RISK OF ELECTRIC
SHOCK! Never attempt to service the
TV yourself. Opening and
27) Always sit approximately 10–25 feet away from the TV and
as directly in front of it as possible. The picture can appear
dull if you sit too far to the left or right of the TV, or if
sunlight or room lights reflect on the screen. Turn the TV
off to check for reflections on the screen, and then remove
the source of reflections while viewing the TV.
removing the covers may expose
you to dangerous voltage or other
hazards. Refer all servicing to a
Toshiba Authorized Service Center.
QUALIFIED
SERVICE
TECHNICIAN
35) If you have the TV serviced:
• Ask the service technician to use only replacement parts
specified by the manufacturer.
• Upon completion of service, ask
the service technician to perform
routine safety checks to determine
that the TV is in safe operating
condition.
28) Always unplug the TV before
cleaning. Never use liquid or
aerosol cleaners.
36) When the TV reaches the end of its useful life, ask a
qualified service technician to properly dispose of the TV.
Improper disposal may result in a picture tube implosion
and possible personal injury.
29)
WARNING: RISK OF ELECTRIC SHOCK!
Never spill liquids or push objects of any kind
into the TV cabinet slots.
4
0303
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the size of the double-window................. 32
Double-Window with keeping aspect ratio ............. 33
Using the programmed channel search function............. 33
Using the favorite channel search function .............. 34
About the auto favorite feature................................ 34
Using the LOCKS menu ............................................... 35
Entering the PIN code ............................................ 35
If you cannot remember your PIN code .................. 35
Using the V-CHIP menu ............................................... 36
ENABLE BLOCKING .......................................... 36
Important Safety Information ............................. 2-4
Introduction................................................................ 6
Welcome to Toshiba......................................................... 6
Exploring your new TV ................................................... 6
Note regarding Quick Connect Guide........................ 6
Connecting your TV .................................................. 7
Connecting a VCR .......................................................... 7
Connecting a cable converter box .................................... 8
Connecting a cable converter box and VCR ..................... 8
Connecting a DVD player or satellite receiver and
a VCR.............................................................................. 9
Connecting a DVD player with ColorStream®
TV RATING (Independent rating system for
broadcasters) ........................................................... 36
MPAA RATING (Independent rating system for
movies) ................................................................... 37
(component video) and a VCR ...................................... 10
Connecting a DTV receiver/set-top box with
BLOCKING OPTION .......................................... 37
Unlocking programs temporarily ............................ 38
Locking channels ........................................................... 38
Locking video inputs ..................................................... 39
Using the game timer ..................................................... 40
Using the front panel lock feature .................................. 40
Changing the PIN code ................................................. 40
Adjusting the picture ..................................................... 41
Selecting the picture mode ...................................... 41
Adjusting the picture quality ................................... 41
Saving new preference ............................................. 42
Using the flesh tone feature ..................................... 42
Using the CableClear™ DNR feature .................... 42
Selecting the color temperature ............................... 43
Selecting the display format (540p/1080i) .............. 43
Resetting picture adjustments ................................. 43
Selecting the video input source ..................................... 44
Labeling the video input sources .................................... 44
Using the closed caption feature ..................................... 45
Setting the ON-timer .................................................... 46
Setting the sleep timer.................................................... 46
Setting the clock ............................................................ 47
Selecting the background of the menu display ............... 47
Adjusting the sound ....................................................... 48
Muting the sound ................................................... 48
Selecting stereo/SAP broadcasts .............................. 48
Using the WOW™ surround sound feature ........... 49
Adjusting the sound quality .................................... 49
Resetting your audio adjustments ........................... 50
Using the sub-bass system (SBS) ............................. 50
Turning off the built-in speakers ............................. 51
Selecting the Audio OUT sound ............................. 51
Using the StableSound® feature .............................. 52
Displaying on-screen information .................................. 52
Viewing the demo mode ................................................ 53
Understanding the auto power off feature ...................... 53
Understanding the last mode memory feature ................ 53
ColorStream® (component video) and a VCR ................ 11
Connecting two VCRs ................................................... 12
Connecting a camcorder ................................................ 12
Connecting a device to the DVI/HDCP input .............. 13
Connecting an audio system .......................................... 14
Connecting an A/V receiver ........................................... 14
Using the remote control ...................................... 15
Preparing the remote control for use .............................. 15
Installing the remote control batteries ............................ 15
Programming the remote control to operate a cable
converter box, satellite receiver, VCR, DVD player, or
HTIB (home theater in a box) ....................................... 16
Remote control codes .................................................... 16
Remote control codes (cont.) ......................................... 17
Using the remote control to operate a cable converter
box, satellite receiver, VCR, DVD player, or HTIB
(home theater in a box) .................................................. 18
Learning about the remote control ................................. 19
Setting up your TV .................................................. 20
Learning about the menu system ................................... 20
Changing the on-screen display language ....................... 21
Selecting the antenna input............................................ 21
Adding channels to the TV’s memory ............................ 22
Programming channels automatically...................... 22
Adding and erasing channels manually.................... 22
Using the Quick Connect Guide ................................... 23
Changing channels ........................................................ 24
Changing channels using SpeedSurf ........................ 24
Adjusting the tilt correction feature................................ 24
Using the TV’s features.......................................... 25
Adjusting the channel settings........................................ 25
Switching between two channels using Channel
Return .................................................................... 25
Switching between two channels using SurfLock™ .. 25
Programming your favorite channels ....................... 25
Labeling channels ................................................... 27
Viewing the wide-screen picture formats ........................ 28
Selecting the image shape........................................ 28
Using the auto aspect feature .................................. 30
Selecting the cinema mode...................................... 30
Using the POP double-window feature .......................... 31
Switching the main and POP pictures..................... 32
Freezing the POP picture ........................................ 32
Appendix................................................................... 54
Specifications ................................................................. 54
Troubleshooting ............................................................. 55
Limited United States Warranty ..................................... 56
Limited Canada Warranty .............................................. 57
Index .......................................................................... 58
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Welcome to Toshiba
Congratulations! You have purchased one of the finest color TVs on
the market. The goal of this manual is to guide you through setting
up and operating your Toshiba TV as quickly as possible.
This manual applies to models 32HF73 and 36HF73. Before you
start reading, check your model number on the back of the TV.
Instructions in this manual are based on using the remote control.
You can also use the controls on the TV if they have the same name as
those on the remote control.
Please read all the safety and operating instructions carefully, and keep
the manual for future reference.
Note regarding
Quick Connect Guide
The Quick Connect Guide
automatically appears on-screen
the first time the TV is turned on.
This feature provides on-screen
instructions to guide you through
initial setup of your TV.
To stop the Quick Connect
Guide, either press EXIT or turn off
the TV.
Exploring your new TV
See page 23 for details.
You can operate your TV using the buttons on the front panel or the
remote control. The back panel and front panel (behind the door)
provide all the terminal connections you will need to connect other
equipment to your TV. See “Connecting your TV” on page 7.
Illustrations represent 32HF73.
Remote control
Video-3
MENU
Video/audio inputs
VOLUME x •
(behind the door)
POWER
RECALL
INFO
TV/VIDEO
Front
CHANNEL zy
1
4
2
5
8
3
6
DEMO
MENU TV/VIDEO
VOLUME
CHANNEL
AUDIO
VIDEO-3 IN
S-VIDEO V I DEO L/MONO
R
9
CHRTN
7
+10
100
0
ENT
MENU x •zy
POWER
FAV
DEMO
Remote sensor
Power indicator
TV/VIDEO
MENU
DVDMENU
FAV
ANT OUT
ANT-2 IN
TV
ANT-1 IN
DVI/HDCP IN
CBL/SAT CH
VCR
VOL
DVD
(
)
ANT 75
DVI/HDCP IN
POP DIRECT CH MUTE
SLEEP
ANT-1
OUT
ANT-2
TV/VCR PAUSE
STOP
PLAY
SPLIT
Back
FREEZE SOURCE
REW
FF
SKIP/SEARCH
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
CH SCAN
REC
SWAP
POP CH
LIGHT
Y
Y
AUDIO
R
L
PB
PB
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
PR
PR
L/
L/
L/
MONO
MONO
MONO
L
L
L
VAR
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
AUDIO
ON OFF
R
R
R
R
IN
OUT
Video/
Audio OUT
VIDEO 1/2
Audio Center Channel IN
Variable Audio OUT
ColorStream
HD-1
ColorStream
HD-2
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting your TV
Note: Cables are not supplied with your TV.
●
Coaxial cable is the cable that comes in from your antenna, cable TV
service, or cable converter box. Coaxial cable uses “F” connectors.
Coaxial (antenna) cable
●
Standard A/V (audio/video) cables usually come in sets of three, and
are typically color-coded according to use: yellow for video, red for
stereo right audio, and white for stereo left (or mono) audio.
On your TV’s back panel, the standard A/V inputs are color-coded in
the same manner as the cables.
Standard A/V cables (red/white/yellow)
S-video cable
●
S-Video cable is for use with video equipment that has an S-Video input.
●
Component video cables come in sets of three, and are for use with
video equipment that has component video inputs. (ColorStream® is
Toshiba’s brand of component video.)
●
DVI-D digital single-link cable is for use with video equipment that
has a DVI-D digital single-link connector (see page 13).
Component video cables
NOTE REGARDING PICTURE QUALITY
When connecting video equipment to your Toshiba TV:
●
For GOOD picture quality: Use a standard yellow video cable.
●
DVI-D digital single-link cable
For BETTER picture quality: If your equipment has an S-video
input, use an S-video cable instead of a standard yellow video cable.
(You still must connect the standard red and white audio cables for full
system connection, but do not connect the standard yellow video cable
at the same time, or the picture performance will be unacceptable.)
CAUTION:
Do not plug in any power cords until you have
finished connecting all equipment.
●
For BEST picture quality: If your equipment has component video (or
DVI) inputs, use either component video cables (or a DVI cable) instead
of a standard video or S-video cable. (You still must connect the standard
red and white audio cables for full system connection, but do not connect
the standard yellow video cable or an S-Video cable at the same time.)
Connecting a VCR
This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
• two coaxial cables
• one set of A/V cables
Note:
From Cable Box or Antenna
Stereo VCR
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
VIDEO
AUDIO
If you have a VCR with S-video, use an S-
video cable (in the S-video jacks) instead of
the regular video cable.
L
R
IN
OUT to TV
IN from ANT
CH 3
CH 4
OUT
Do not connect a regular video cable and an
S-video cable to Video 1 (or Video 2) at the
same time, or the picture performance will be
unacceptable.
(
)
ANT 75
DVI/HDCP IN
A1
OUT
ANT-2
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
Y
Y
AUDIO
R
L
PB
PB
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
PR
PR
L/
L/
L/
MONO
MONO
MONO
L
L
L
VAR
AUDIO
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
ON OFF
R
R
R
R
IN
OUT
TV
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a cable converter box
This connection allows you to watch basic and premium cable channels
.
Note:
When you use a converter box with your TV,
the remote control will not operate some
features, such as programming your favorite
channels, labeling channels, and locking
channels.
To watch basic cable and use the TV’s features, select ANT-1. To view
premium channels, select ANT-2, tune the TV to channel 3 or 4
(whichever channel is vacant in your area), and use the converter box
to change channels.
You will need:
• three coaxial cables
From Cable
TV
(
)
ANT 75
DVI/HDCP IN
ANT-1
A2
OUT IN
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
Y
Y
AUDIO
R
L
Cable converter box
PB
PR
PB
PR
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
L/
L/
L/
MONO
MONO
MONO
L
L
L
VAR
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
AUDIO
ON OFF
R
R
R
R
IN
OUT
Connecting a cable converter box and VCR
This connection allows you to watch and record basic and premium
cable channels, watch videotapes, and record one channel while
watching another channel. To watch basic cable and use the TV’s
features, select ANT-1.
To view premium channels or record with the VCR, select ANT-2,
tune the TV to channel 3 or 4 (whichever channel is vacant in your
area), and use the converter box to change channels.
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a VCR with S-video, use an S-
video cable (in the S-video jacks) instead of a
regular video cable. Do not connect a regular
video cable and an S-video cable to Video 1
(or Video 2) at the same time.
You will need:
• four coaxial cables
• one set of A/V cables
When you use a converter box with your TV,
the remote control will not operate some
features, such as programming your favorite
channels, labeling channels, and locking
channels.
From Cable
TV
(
)
ANT 75
DVI/HDCP IN
A1
ANT-2
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
IN
Y
Y
AUDIO
R
L
OUT
PB
PB
Cable converter box
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
PR
PR
L/
L/
L/
MONO
MONO
MONO
L
L
L
VAR
AUDIO
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
ON OFF
R
R
R
R
IN
OUT
L
L
R
IN
OUT to TV
IN from ANT
OUT
CH 3
CH 4
R
VIDEO
AUDIO
Stereo VCR
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD player or satellite receiver
and a VCR
This connection allows you to watch DVD/satellite, VCR, and TV
programs, and record one TV channel while watching another
channel.
Note:
For the highest possible picture quality from a
non-ColorStream DVD player/satellite
receiver, you must use an S-video cable
between the TV and DVD player/satellite
receiver. (If your DVD player or satellite
receiver is ColorStream-compatible, see page
10).
You will need:
• two coaxial cables (three if satellite receiver is used)
• one set of A/V cable
• one pair of audio cables
Do not connect both an S-video cable and a
regular video cable between the TV and DVD
player/satellite receiver at the same time.
Doing so will distort the picture.
• one S-video cable (between the TV and DVD player/satellite
receiver)
Stereo VCR
Do not connect the DVD player/satellite
receiver and VCR to the same video channel
on the TV. (See the illustrations, which show
the DVD player/satellite receiver connected to
Video 1 on the TV, and the VCR connected to
Video 2 on the TV.)
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
From
Antenna
OUT
TV
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
(
)
ANT 75
DVI/HDCP IN
A1
OUT
ANT-2
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
Y
Y
AUDIO
R
L
PB
P
B
R
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
P
L/
L/
L/
MONO
MONO
MONO
L
L
VAR
DIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
AUDIO
ON OFF
R
R
R
R
IN
OUT
DVD Player
AUDIO
OUT
L
R
S-VIDEO VIDEO
OUT OUT
From
Satellite
Dish
Satellite Receiver
AUDIO
OUT
L
IN from ANT
R
S-VIDEO VIDEO
OUT OUT
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD player with ColorStream®
(component video) and a VCR
Note:
This connection allows you to watch DVD, VCR, and TV programs,
and record TV programs.
For the highest possible picture quality, use
component video cables between the TV and
DVD player. You can connect the component
video cables from the DVD player to either
ColorStream jack on the TV (HD-1 or HD-2).
Your TV has ColorStream® (component video) inputs. Connecting
your TV to a DVD player with component video inputs (such as a
Toshiba DVD player with ColorStream®) can greatly enhance picture
quality and realism.
The ColorStream HD-1 and HD-2 jacks can
be used with Progressive (480p, 720p) and
Interlace (480i,1080i) scan systems.
– To record one TV program while watching another TV program,
tune the VCR to the channel to record, and tune the TV to the
channel to watch.
If your DVD player does not have component
video inputs, use the S-video connections
(plus the standard audio connections) instead
of the ColorStream connections; however, do
not connect both S-Video and standard video
cables between the TV and DVD player at the
same time. See page 9.
– To record a TV program while watching a DVD, tune the VCR to
the channel to record, and select ColorStream HD-1 on the TV (see
“Selecting the antenna input” on page 21).
You will need:
• two coaxial cables
• one set of A/V cable
• one pair of audio cable
• one set of component video cables (one S-video cable for a DVD
player without component video inputs; see notes at right)
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
Stereo VCR
IN from ANT OUT to TV
VIDEO
AUDIO
L
R
From Antenna
IN
CH 3
CH 4
OUT
TV
(
)
ANT 75
DVI/HDCP IN
A
OUT
ANT-2
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
Y
Y
AUDIO
R
L
PB
PB
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
PR
PR
L/
L/
L/
MONO
MONO
MONO
L
L
L
VAR
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
AUDIO
ON OFF
R
R
R
R
IN
OUT
AUDIO
OUT
L
L
Y
P
B
PR
R
R
VIDEO
OUT
S-VIDEO
COMPONENT VIDEO
DVD Player with component video
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DTV receiver/set-top box with
ColorStream® (component video) and a VCR
Note:
This connection allows you to watch DTV (digital TV), VCR, and
TV programs, and record DTV and TV programs.
For the highest possible picture quality, use
component video cables between the TV and
DTV receiver. You can connect the
component cables from the DTV receiver to
either ColorStream jack on the TV (HD-1 or
HD-2).
Your TV has ColorStream (component video) inputs. Connecting
your TV to a DTV receiver with component video inputs can greatly
enhance picture quality and realism.
– To record and watch a DTV program, select LINE IN on the
VCR, and select ColorStream HD-2 (or VIDEO 1 for a non-
ColorStream connection) on the TV (see “Selecting the antenna
input” on page 21).
The ColorStream HD-1 and HD-2 jacks can
be used with Progressive (480p, 720p) and
Interlace (480i,1080i) scan systems.
– To record a TV program while watching a DTV program, tune the
VCR to the channel to record, and select ColorStream HD-2 on
the TV.
– To record and watch the same TV program, tune the VCR to the
channel to record, and select VIDEO 1 on the TV.
If your DTV receiver does not have
component video inputs, use the S-video and
standard audio connections instead of the
ColorStream connections. Do not connect
both an S-video and a standard video cable
between the TV and DTV receiver at the same
time.
– To record one TV program while watching another TV program,
tune the VCR to the channel to record, and tune the TV to the
channel to watch.
To monitor recording, set the TV to VIDEO 1.
You will need:
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
• three coaxial cables
• two sets of A/V cables
• one pair of audio cables
• one set of component video cables (one S-video cable for a DTV
receiver without component video; see notes at right)
Stereo VCR
IN from ANT OUT to TV
From
Antenna
VIDEO
AUDIO
L
R
IN
CH 3
CH 4
OUT
TV
(
)
ANT 75
DVI/HDCP IN
A1
OUT
ANT-2
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
Y
Y
AUDIO
R
L
PB
PR
PB
PR
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
L/
L/
L/
MONO
MONO
MONO
L
L
L
VAR
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
AUDIO
ON OFF
R
R
R
R
IN
OUT
AUDIO
OUT
From
DTV Antenna
L
L
Y
PB
PR
Satelite IN
R
R
IDEO
OUT
S-VIDEO
COMPONENT VIDEO
DTV Receiver with component video
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR to
another VCR while watching a videotape. You can also record from
one TV channel while watching another TV channel.
You will need:
• two coaxial cables
• two sets of A/V cables
VCR1
IN from ANT OUT to TV
VIDEO
AUDIO
Note:
L
R
From Antenna
If you have VCRs with S-video, use S-video
cables instead of standard video cables for
better picture performance. Do not connect
both a standard video cable and an S-video
cable to Video 1 (or Video 2) at the same
time, or the picture performance will be
unacceptable.
IN
CH 3
CH 4
OUT
TV
(
)
ANT 75
DVI/HDCP IN
Do not connect the same VCR to the output
and input jacks on the TV at the same time.
A
OUT
ANT-2
To dub or edit, VCR 2 must select Line IN,
and the TV must select VIDEO 1 (see
“Selecting the antenna input” on page 21).
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
Y
Y
AUDIO
R
L
PB
PB
VIDEO
VIDEO
VIDEO
The Video OUT jack does not output the
AUDIO CENTER
CHANNEL IN
PR
PR
*
L/
L/
L/
POP picture.
MONO
MONO
MONO
L
L
L
VAR
**The Audio OUT jacks can output the sound
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
AUDIO
ON OFF
R
R
R
R
of either the Main or POP picture (see
IN
OUT
“Selecting the Audio OUT sound” on page
51).
VCR2
VIDEO
AUDIO
L
R
IN
CH 3
CH 4
OUT
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under the
Copyright Laws of the United States and
other countries, and may subject you to
civil and criminal liability.
*
**
Connecting a camcorder
This connection allows you to watch video materials recorded on a
camcorder.
You will need:
• one set of A/V cables
Camcorder
Note:
If you have a camcorder with S-video, use an
S-video cable between the S-video jacks on
the camcorder and TV instead of a standard
video cable. Do not connect both a standard
video cable and an S-video cable at the same
time, or the picture performance will be
unacceptable.
VIDEO UDIO
OUT
L
R
V
AUDIO
VIDEO-3 IN
S-VIDEO VIDEO L/MONO
R
Video-3 (front panel)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a device to the DVI/HDCP input
The DVI/HDCP1 input on your TV is designed to accept HDCP
program material in digital form from EIA/CEA-861–compliant2
consumer electronic devices, such as a set-top box or DVD player
equipped with a DVI-D digital single-link output connection.3
Note:
1
DVI/HDCP = Digital Visual Interface/
High-bandwidth Digital Content Protection.
2
EIA/CEA-861 compliance covers the
transmission of uncompressed digital
video with high-bandwidth digital content
protection, which is being standardized for
future reception of high-definition video
signals.
The DVI/HDCP input is designed for best performance with 1080i
high-definition video signals. The DVI/HDCP input also will accept
and display 480p and 480i picture signals.
Note: This TV is not intended for connection to
and should not be used with a PC (personal
computer).
3
Consult your consumer electronics dealer
for availability.
You will need:
• one DVI-D digital single-link cable
Caution:
Note: For proper operation, the DVI-D cable length
should not exceed 3m (9.8 ft). The recommended
length is 2m (6.6 ft).
To ensure that the DVI/HDCP device is reset
properly, it is recommended that you follow
these procedures:
• When turning on your electronic
components, turn on the TV first,
and then the DVI/HDCP device.
• When turning off your electronic
components, turn off the DVI/HDCP
device first, and then the TV.
• one pair of standard audio cables
DVI/HDCP device
(for example, set-top box or DVD player)
DVI/HDCP
OUT
VIDEO
AUDIO
L
R
IN
OUT
TV
(
)
ANT 75
DVI/HDCP IN
ANT-1
OUT
ANT-2
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
Y
Y
AUDIO
P
B
R
P
B
R
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
P
P
L/
L/
L/
MONO
MONO
MONO
L
L
L
VAR
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
AUDIO
ON OFF
R
R
R
R
IN
OUT
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting an audio system
Amplifier
This connection allows you to use an audio amplifier to adjust the
audio level. This also allows you to use external speakers.
LINE IN
L
R
To control the audio, turn on the TV and the stereo amplifier, and
turn off the built-in speakers (see “Turning off the built-in speakers”
on page 51).
TV
You will need:
(
)
ANT 75
DVI/HDCP IN
ANT-1
OUT
ANT-2
• one pair of audio cables
Note:
COLOR
COLOR
VIDEO
1
VIDEO
2
STREAM HD-1 STREAM HD-2
S-VIDEO S-VIDEO
Y
Y
AUDIO
To hear sound when using an external audio amplifier, the
volume of both the TV and the amplifier must be set
above 0 (zero).
R
L
P
B
R
P
B
R
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
P
P
L/
L/
L/
MONO
MONO
MONO
L
L
L
For example, if the volume of the TV is set to 0, you will
not be able to hear any sound, even the volume of the
amplifier is at its highest level.
VAR
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
AUDIO
ON OFF
R
R
R
R
IN
OUT
Connecting an A/V receiver
This connection allows you to use an audio/video (A/V) receiver to
enhance your TV’s sound.
If you have a sound system with “Dolby Surround Pro Logic”, you
can add to the realism of the sound by using the TV’s internal
speakers as center channel speakers.
Caution:
To avoid damaging the speakers, turn the TV
off before connecting or disconnecting the
Audio Center Channel audio cable.
You will need:
• one set of A/V cables
• one single audio cable for the audio center channel
To A/V Receiver
From
From
Center OUT
To TV IN
“Dolby Surround Pro Logic”* sound
system connection example
Video OUT
TV
Audio
Video
Video
Audio
(
)
ANT 75
DVI/HDCP IN
ANT-1
OUT
ANT-2
VCR
LDP/DVD
COLOR
COLOR
VIDEO 1 VIDEO 2
S-VIDEO S-VIDEO
STREAM HD-1 STREAM HD-2
Y
Y
AUDIO
R
L
PB
PB
A/V receiver
VIDEO
VIDEO
VIDEO
AUDIO CENTER
CHANNEL IN
P
R
P
R
L/
L/
L/
MONO
MONO
MONO
ON
OFF
L
L
L
VAR
AUDIO
AUDIO
R
AUDIO AUDIO
AUDIO
AUDIO
R
ON OFF
R
R
R
R
IN
OUT
T V
Note:
Left
speaker
Right
speaker
Refer to the instructions provided with your A/V receiver
for details about your surround sound system.
When the Audio Center Channel ON/OFF switch is in
the ON position, the TV speakers will function only as
center channel speakers. At this time, the SBS feature
should be set OFF. See page 50.
Surround
speaker L
Surround
speaker R
Adjust the volume for the center channel speakers
using the center level control on the A/V receiver.
_________
* “Dolby” and “Pro Logic” are trademarks of
Dolby Laboratories.
To use the TV speakers as normal speakers, set the
Audio Center Channel ON/OFF switch to the OFF
position.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the remote control
Preparing the remote control for use
Your TV remote control can operate your TV and most cable
converter boxes, satellite receivers, VCRs, DVD players, and HTIBs
(home theater in a box), even if they are different brands.
If you have a Toshiba device:
Your TV remote control is preprogrammed to operate most Toshiba
devices. See page 18.
If you have a non-Toshiba device or a Toshiba device
that the remote control is not preprogrammed to
operate:
You can program the TV remote control so it will operate the other
device. See pages 16–18.
Installing the remote control batteries
1. Remove the battery cover from the back of the remote control.
Caution:
• Dispose of batteries in a designated
disposal area. Do not throw batteries into a
fire.
• Do not mix battery types or combine used
batteries with new ones.
Squeeze tab and
lift cover.
• If the remote control does not operate
correctly, or if the operating range becomes
reduced, replace both batteries with new
ones.
2. Install two “AA” size batteries, making sure to match the + and –
signs on the batteries to the signs on the battery compartment.
• If the batteries are dead or if you will not
use the remote control for a long time,
remove the batteries to prevent battery acid
from leaking into the battery compartment.
Note:
If your Toshiba TV remote control does not
operate all the features of your other device,
use the original remote control for that device.
3. Reinsert the battery cover in the remote control until the tab
snaps.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming the remote control to operate a
cable converter box, satellite receiver, VCR,
DVD player, or HTIB (home theater in a box)
Your Toshiba TV remote control is preprogrammed to operate most
Toshiba devices. To program your TV remote control to operate a
non-Toshiba device (or a Toshiba device that it is not preprogrammed
to operate), follow the steps below. For details on using the remote
control to operate the device, see page 18.
RECALL
POWER
POWER
RECALL
INFO
TV/VIDEO
1
4
2
5
8
3
6
Channel
Number
1. In the remote control code table (below and on the next page),
find the code for your device. If more than one code is listed, try
each one separately until you find one that works.
9
CHRTN
7
+10
100
0
ENT
FAV
PIC
2. Set the Device Switch to the type of device you are programming
the remote control to operate — CBL/SAT (for a cable converter
box or satellite receiver), VCR (for a VCR or TV/VCR combo),
or DVD (for a DVD player or HTIB [home theater in a box]).
SI
ZE
FAVORITE
MENU
DVDMENU
ENTER
EXIT
3. While holding down RECALL, press the Channel Number
FAV
buttons to enter the 3-digit code for your device.
TV
Device Switch
CBL/SAT CH
VCR
VOL
4. To test the code, turn on the device, point the remote control at
DVD
it, and press POWER.
• If the correct code was entered, the device will turn off.
• If the device does not respond, repeat steps 1 – 4 using
another code.
Note:
Every time you change the batteries, you will
• If the device does not respond to another code, you will need
to use the remote control that came with the device.
need to reprogram the remote control.
Some newer VCRs respond to either of two
codes. These VCRs have a switch labeled
“VCR1/VCR2.” If your VCR has this kind of
switch and does not respond to the codes for
your VCR brand, set the switch to the other
position (“VCR1” or “VCR2”) and reprogram
the remote control.
5. Remember to set the Device Switch back to TV to control the TV.
6. For future reference, write down the code(s) you used:
DEVICE
CODE
DEVICE
CODE
Remote control codes
In some cases you may not be able to operate your device with the TV
remote control. Your other device may use a code that is not
recognized by the TV remote control. If this happens, you will need
to use the remote control provided with the device.
Hamlin: 093
Hitachi: 062, 095, 096
Jasco: 097
RCA: 064, 081
Realistic: 065
Recoton: 102
Samsung: 077, 090
Scientific Atlanta: 063,
078, 079, 080, 088,
098, 101, 105
Sears: 095
Signature: 062
Signature 2000: 096
Sprucer: 081, 085
Starcom: 069, 082, 087,
096, 103, 104
Stargate: 069, 090
Sylvania: 095, 100
TeleView: 090
U. S. Electronics: 087,
096, 098
United Cable: 082
Universal: 065, 092, 097, Hitachi: 033
099, 102, 103
Wards: 096
General Instruments:
010, 011, 012, 022,
023, 031, 049
Cable converter
box
ABC: 061, 062, 063,
082, 084, 087, 091,
092, 096, 098
Archer: 065, 092, 097,
099
Cableview: 064, 094
Century: 092
Citizen: 090, 092, 097
Contec: 083, 085, 086,
088, 093, 098
Diamond: 093
Eagle: 091
GE: 061, 062
Gemini: 069, 070, 094
General Instruments:
062, 089, 096
Jerrold: 062, 069, 071,
082, 086, 089, 091,
096
Magnavox: 072, 096
Memorex: 091, 092, 104
Multi Canal: 090
Novavision: 101
Panasonic: 081, 083, 085
Philco: 087
Philips: 066, 067, 068,
070, 072, 073, 074,
075, 091, 092
Pioneer: 076, 077
Proscan: 061, 062
Radio Shack: 092, 097,
099
Hughes: 033
Hughes Network
Systems: 019
Intersat: 048
Janeil: 027
JVC: 017, 057
Kenwood: 029
Magnavox: 060
Optimus: 058
Pansat: 036, 052
Primestar: 015, 042
Proscan: 008, 009, 013
Radio Shack: 022, 023,
030
Satellite receiver
Alphastar: 038, 059
Chaparral: 034
DISH Network: 057
Drake: 020, 040, 044,
046, 050, 053
Echostar: 018, 041, 051
Express Vu: 057
Fujitsu: 027
GE: 008, 009, 013
Texscan: 100
Tocom: 071, 084, 085
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control codes (cont.)
Hitachi: 005, 032, 033,
034, 035
JVC: 003, 007, 036,
Colortyme: 005
Craig: 009, 010, 016,
061, 065, 079
Curtis Mathes: 001, 005,
009, 012, 014, 040,
048, 053, 056, 057
Daewoo: 011, 013, 015,
017, 018, 019, 057,
078
Daytron: 078
Denon: 063
Dimensia: 001, 048
Electrohome: 010, 020,
065
Emerson: 003, 008, 010,
011, 017, 018, 020,
028, 039, 054, 057,
062, 065, 068, 072
Fisher: 007, 016, 021,
022, 023, 057, 064,
068, 070, 071, 079
Fuji: 004, 041
Memorex: 007, 009,
010, 016, 018, 034,
049, 063, 065, 066,
068, 075, 079
MGA: 020, 028, 039
MGN: 056
Minolta: 024, 025, 035,
063
Mitsubishi: 020, 024,
025, 028, 039, 043,
065
Sanyo: 007, 009, 016,
054, 064, 068, 071,
075, 079, 085
Scott: 008, 011, 017,
028, 030, 057, 065,
072
Sears: 007, 010, 016,
021, 022, 023, 024,
025, 035, 053, 057,
063, 064, 065, 068,
071, 075, 079
Sharp: 013, 020, 031,
049, 051, 060, 066
Shintom: 004, 025, 032,
061
Satellite receiver
(cont.)
RCA: 008, 009, 013, 016
042, 088
Realistic: 030
Kenwood: 037
Samsung: 059
Sony: 014, 055
Konka: 008, 009
Magnavox: 004, 038
Star Choice: 057
Memorex: 039
Star Trak: 025, 026, 037,
Mintek: 040
054
STS: 024
Toshiba: 000, 001, 002,
NAD: 026
Nakamichi: 041
Norcent: 043
Montgomery Ward: 049
Motorola: 049
003, 004, 005, 006,
Onkyo: 044
007, 020, 031, 056
Oritron: 058
MTC: 009, 046, 061
Multitech: 009, 012, 018
NEC: 005, 006, 007,
012, 014, 037, 043,
053, 054, 067, 070
Nikko: 010
Noblex: 009
Optimus: 010, 049, 065
Optonica: 031
Orion: 054, 057, 062,
065, 068, 072
Panasonic: 036, 045,
046, 057, 061, 072,
079
Pentax: 012, 024, 025,
035, 042, 053, 063
Pentex Research: 014
Philco: 026, 027, 063
Philips: 026, 031, 044,
057
Pioneer: 006, 024, 043,
055
Portland: 012, 013, 015
Proscan: 001, 002, 048
Proton: 061
Quasar: 045
Radio Shack: 010, 031,
065
Radio Shack/Realistic:
007, 009, 010, 016,
018, 020, 021, 022,
031, 049
Uniden: 021, 028, 030,
Panasonic: 010, 045,
032, 035, 039, 043,
046, 047, 048, 049,
Signature: 049
045, 047, 058
Zenith: 027
050
Signature 2000: 075
Singer: 047, 061
Sony: 004, 032, 033,
041, 052, 058, 070,
074, 076, 077, 080
STS: 035
Sylvania: 018, 026, 027,
028, 044, 072
Symphonic: 018, 050,
051, 053, 073, 079
Tandy: 007
Tashiko: 010
Tatung: 037
Teac: 018, 029, 037
Technics: 036
Teknika: 010, 018, 065
Toshiba: 000, 011, 021,
023, 024, 028, 030,
039, 057, 074, 078,
079
Totevision: 009, 010,
065
Unitec: 073
Philips: 004, 051
Pioneer: 052, 053, 054,
TV/VCR Combo
055
Proscan: 001, 056
Qwestar: 057, 058
RCA: 001, 002, 059, 089 Funai: 018, 073
Sampo: 060
Samsung: 061, 062, 086,
090
Action: 078
GE: 059, 062
Goldstar: 065
Panasonic: 065
Precision: 078
Quasar: 065
Realistic: 079
Sony: 074
Garrard: 018
GE: 001, 002, 009, 040,
042, 048, 056
Go Video: 056, 059,
061, 081
Goldstar: 005, 010, 014,
054, 056, 065, 067
Gradiente: 018, 065
Harman Kardon: 005
Hitachi: 024, 025, 035,
037, 042, 063, 070,
080
Sansui: 073
Sanyo: 063, 091
Sharp: 064, 067
Sherwood: 074
Sony: 011, 012, 065,
066, 068, 069, 070
Sylvania: 027
Toshiba: 057
Zenith: 065
DVD/VCR Combo
Go Video:
DVD=087, VCR=081
JVC:
DVD=088, VCR=082
RCA:
DVD=089, VCR=083
Samsung:
DVD=090, VCR=084
Sanyo:
DVD=091, VCR=085
Zenith:
Teac: 071
Technics: 072
Techwood: 075
Toshiba: 000, 013, 076,
077, 078
Yamaha: 079, 080, 081
Zenith: 014, 082, 092
JBL: 076
JC Penney: 005, 006,
007, 008, 009, 010,
023, 024, 025, 026,
035, 056, 061, 063,
065
Unitech: 009
Vector Research: 005,
006, 011, 012, 053
Video Concepts: 005,
006, 011, 012, 039,
053
Wards: 009, 010, 011,
016, 018, 020, 024,
025, 031, 035, 049,
051, 056, 057, 060,
065, 066, 079
White Westinghouse:
073
XR-1000: 018
Yamaha: 005, 006, 007,
014, 037, 053
Zenith: 004, 032, 034,
041, 047, 069, 086
Jensen: 024, 025, 037,
050
Portable DVD player
Aiwa: 093
JVC: 005, 006, 007,
014, 037, 043, 050,
062, 063, 068, 082
Kenwood: 005, 006,
007, 012, 014, 037,
043, 050, 053, 068,
071
Kodak: 010
LG: 010
Lloyds: 053, 073, 079
Logik: 061
LXI: 010
Magnasonic: 061, 065,
078
Magnavox: 026, 027,
034, 044, 057, 061,
072
Marantz: 005, 006, 007,
012, 014, 026, 053,
067
Audiovox: 094, 095
Panasonic: 024, 096, 099
RCA: 098
DVD=092, VCR=086
Radix: 010
DVD player
RCA: 001, 002, 003,
009, 024, 025, 029,
035, 040, 042, 045,
048, 055, 056, 063,
071, 083
Realistic: 007, 009, 010,
011, 016, 018, 020,
021, 022, 031, 049,
051, 056, 060, 065,
075, 079
Ricoh: 047
Runco: 034
Samsung: 009, 011, 038,
056, 073, 084
Sansui: 006, 037, 043,
061
Aiwa: 006, 015
Apex: 016, 017
BOSE: 097
Broksonic: 018
Clarion: 019
Classic: 020
Daewoo: 021
Denon: 022, 023, 024,
025
Emerson: 026, 027
Fisher: 028
VCR
Admiral: 049
Aiko: 019
Aiwa: 018
Akai: 003, 004, 037,
038, 039, 058, 069
Audiovox: 010
Bell & Howell: 007, 068
Broksonic: 008, 017
Calix: 010
Carver: 026
CCE: 019
Citizen: 009, 010, 011,
012, 013, 014, 015,
019, 057, 073
Funai: 027
HTIB
GE: 001, 029, 030
Go Video: 087
GPX: 031
Lasonic: 083
Panasonic: 084
Venturer: 085
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the remote control to operate a cable
converter box, satellite receiver, VCR, DVD
player, or HTIB (home theater in a box)
If you have a non-Toshiba device or a Toshiba device that the remote
control is not preprogrammed to operate, you must first program the
remote control to recognize the device (if you have not already done
so). See pages 16 and 17.
Note:
Even after the TV remote control is
programmed, it may not operate certain
features on your other device. If this happens
and you wish to use those features, you will
need to use the device’s original remote
control.
To use your TV remote control to operate a:
• cable converter box or satellite receiver, set the Device Switch to
CBL/SAT.
• VCR, set the Device Switch to VCR.
• DVD player or HTIB, set the Device Switch to DVD.
Point the remote control
directly at the device.
POWER
RECALL
INFO
TV / VIDEO
POWER
Turns the selected device on and off.
INFO (CBL/SAT only)
Displays on-screen information.
1
4
2
5
8
3
6
Channel Numbers (0-9)
Press to directly access channels (as
opposed to CH y z).
9
CHRTN
7
+10
+10 (DVD only)
Press to directly access
100
0
ENT
DVD chapters higher than 10.
FAV
PI
C
S
GUIDE (CBL/SAT only)
I
ZE
Displays channel guide.
FAVORITE
TOP MENU (DVD only)
Accesses a DVD’s top menu.
MENU
DVDMENU
y z x • (DVD only)
Press to navigate DVD menus (may not
ENTER
Required by some VCRs and cable
converter boxes to change the channel.
work on some DVD players).
ENTER
CLEAR (DVD only)
Press to reset the title and chapter
number.
EXIT
FAV
Device Switch
Set to “TV” to control the TV; “CBL/SAT” to
control a cable converter box or satellite
receiver; “VCR” to control a VCR; “DVD” to
control a DVD player or HTIB.
TV
CBL/SAT CH
VCR
VOL
CH y z
DVD
y selects the next higher channel;
z selects the next lower channel.
POP DIRECT CH MUTE
SLEEP
PAUSE
Press during play or record mode to
pause the picture; press again to restart.
TV/VCR PAUSE
STOP
PLAY
SPLIT
PLAY
FREEZE SOURCE
TV/VCR (VCR only)
To view one program while recording
another, press to select TV mode.
Begins playback of a tape or DVD.
REW
FF
SKIP/SEARCH
STOP
CH SCAN
REC
SWAP
POP CH
LIGHT
Stops the tape or DVD.
REW
Rewinds the tape or DVD. (Press during play mode
to view the picture moving rapidly backward.)
SKIP/SEARCH
Skips forward to locate later DVD
(DVD only)
chapters.
REC (VCR only)
Starts tape recording.
SKIP/SEARCH
Skips back to beginning of current DVD
chapter or locates previous chapters.
(DVD only)
FF
Fast-forwards the tape or DVD.
(Press during play mode to view the
picture moving rapidly forward.)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Learning about the remote control
The buttons used for operating the TV only are described here.
POWER turns the TV on and off
POWER
RECALL
INFO
TV / VIDEO
RECALL displays screen information (page 52)
SLEEP sets the TV to turn off at a specific time (page 46)
TV/VIDEO selects video input source (page 44)
MUTE mutes the sound (page 48)
1
4
2
5
8
3
6
9
CHRTN
7
Device Switch switches between TV, CLB/SAT, VCR, and DVD (Pages 16-18)
+10
Set to “TV” to control the TV.
100
0
ENT
CH (channel) y z cycles through programmed channels (page 24)
Channel Numbers (0-9, 100) allow direct access to channels (page 24)
VOL (volume) y z adjusts the volume level
FAV
PIC SIZE
FAVORITE
MENU
DVDMENU
CH RTN returns to the memorized channel (page 25)
ENTE
R
MENU allows access to on-screen programming menus (page 20)
ENTER sets programmed menu information (page 20)
y z x • select or adjust programming menus (page 20)
POP CH y z selects the POP (picture-out-picture) channel (page 31)
FAV y z cycles through favorite channels (page 26)
T
EXI
FAV
TV
CBL/SAT CH
VCR
VOL
DVD
POP DIRECT CH MUTE
SLEEP
TV/VCR PAUSE
STOP
PLAY
SPLIT
FAVORITE allows access to the favorite channel search function (page
FREEZE SOURCE
FF
34)
REW
SKIP/SEARCH
CH SCAN
REC
SWAP
POP CH
LIGHT
PIC SIZE cycles through the three picture sizes: Normal,
Compression, and Zoom (page 28)
EXIT exits programming menus (page 20)
SPLIT turns the POP feature on and off (page 31)
SOURCE selects the POP picture source (page 31)
FREEZE freezes the POP picture (page 32)
SWAP switches the main and POP pictures (page 32)
POP DIRECT CH allows direct access to POP channels (page 31)
CH SCAN allows access to the programmed channel search function (page 33)
LIGHT illuminates the keypad for five seconds
Note:
The error message “Not Available” will appear
if you press a key for a function that is not
available.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV
Learning about the menu system
Note regarding
After you have installed the batteries and programmed the remote
control, you will need to set some preferences on the TV using the
menu system. You can access the menu using the buttons on your TV
or remote control.
1. Press MENU to display the menu system.
2. Press x or • to select menu.
Quick Connect Guide
The Quick Connect Guide
automatically appears on-screen the
first time the TV is turned on. This
feature provides on-screen
instructions to guide you through
initial setup of your TV.
3. Press y or z select an item.
4. Press x or • to select or adjust a setting.
To stop the Quick Connect Guide,
either press EXIT or turn off the TV.
See page 23 for details.
P I CTURE ANTENNA
MODE
SPORTS
CONTRAST
BR IGHTNESS
COLOR
1 0 0
5 0
5 0
0
T I NT
5 0
SHARPNESS
RESET
SAVE NEW PREFEREN
TV front panel
P I CTURE ANTENNA
MODE
SPORTS
: SELECT
EXIT : E
FLESH TONE
CableClear DNR
COLOR
ON/ OFF
OFF
DEMO
MENU TV/VIDEO
VOLUME
CHANNEL
TEMPERATURE
DISPLAY FORMAT
SAVE NEW PREFEREN
AUDI O
: S
: MOVE
MTS
STEREO
BASS
50
50
0
TREBLE
BALANCE
RESET
x •zy
MENU
AUDI O
: SELECT
EXIT : E
SBS
ON/ OFF
7 0
SBS LEVEL
SPEAKERS
AUDI O OUT
ON
MAI N
STABLE SOUND ON
POWER
RECALL
INFO
TV/VIDEO
: MOVE
: SELECT
1
4
2
5
8
3
6
9
CHRTN
THEATER
7
WOW
+10
SRS 3D
OFF
OFF
O
FOCUS
TruBass
I MAGE SHAPE
AUTO ASPECT
C I NEMA MODE
100
0
ENT
O
VI
FAV
PIC
SI
ZE
ORITE
FAV
SET UP
LANGUAGE
ENGL I SH
- - : - -
:
CLOCK SET
EXI
SELECT
MENU
yzx •
ANT1 / 2
ANT1
MENU
DVDMENU
TV / CABLE
CH PROGRAM
ADD / ERASE
CABLE
T I LT CORRECT I ON
QU I CK CONNECT
ENTER
EXIT
EXIT
FAV
CUSTOM
EX
:
SELECT
T I MER
ON
0 0 h 0 0 m
0 h 0 0 m
OFF
TV
SLEEP
CC
CBL/SAT CH
VCR
VOL
ENTER
FAVOR I TE CH1
FAVOR I TE CH2
CH LABEL I NG
DVD
V I
LABEL
DEO
POP DIRECT CH MUTE
SLEEP
BACKGROUND
LOCKS
: SELECT
EXIT :
TV/VCR PAUSE
STOP
PLAY
SPLIT
V–CH I P
ENABLE BLOCK I NG OFF
TV RAT I NG
FREEZE SOURCE
REW
FF
SKIP/SEARCH
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
CH SCAN
REC
SWAP
POP CH
LIGHT
V I DEO LOCK
OFF
OFF
OFF
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
:
SELECT
EXIT : END
• Press ENTER to activate the function settings in the menus.
• The main menu display will disappear automatically if you do
not make a selection within 15 seconds. If you want to close all
the on-screen displays instantly, press EXIT.
Note:
You can change the background of the
menu. See page 47 for details.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the on-screen display language
You can choose from three different languages (English, French and
Spanish) for the on-screen display of adjustment menus and messages.
TV front panel
DEMO
MENU TV/VIDEO
VOLUME
CHANNEL
To select a language:
1. Press MENU, and then press x or • until the SET UP menu
appears.
2. Press y or z to highlight LANGUAGE.
x •zy
MENU
SET UP
LANGUAGE ENGL I SH FRANCA I S ESPANOL
/
/ - - : - -
CLOCK SET
ANT1 / 2
ANT1
TV / CABLE
CABLE
CH PROGRAM
ADD / ERASE
T I LT CORRECT I ON
ADD
0
POWER
QU I C K CONNECT GU I DE
RECALL
INFO
TV/VIDEO
TV/VIDEO
Number
1
4
7
2
5
8
3
6
3. Press x or • to highlight your desired language.
9
CHRTN
Selecting the antenna input
You can connect to two different antenna input sources (ANT 1 or
ANT 2).
+10
100
0
ENT
FAV
PIC
SI
ORITE
ZE
FAV
To select the antenna input using the menu system:
MENU
yzx •
MENU
DVDMENU
1. Press MENU, and then press x or • to highlight the SET UP
menu.
ENTER
EXIT
FAV
2. Press y or z to highlight ANT 1/2.
TV
CBL/SAT CH
VCR
DVD
VOL
SET UP
LANGUAGE
ENGL I SH
- - : - -
CLOCK SET
ANT1 / 2
ANT1 / ANT2
CABLE
TV / CABLE
CH PROGRAM
ADD / ERASE
T I LT CORRECT I ON
ADD
0
QU I C K CONNECT GU I DE
3. Press x or • to highlight either ANT 1 or ANT 2, depending on
the antenna terminal you wish to use.
To select the antenna input using the TV/VIDEO button:
1. Press the TV/VIDEO button on the remote control or TV (see
illustrations below). The current signal source displays in purple.
TV front panel
2. Continue pressing the TV/VIDEO button to select ANT 1 or
ANT 2.
DEMO
MENU TV/VIDEO
VOLUME
CHANNEL
SOURCE SELECT ION
SOURCE SELECT ION
0 : ANT
1 : V IDEO
2 : V IDEO
V IDEO
1
ANT
1
V IDEO
V IDEO
V IDEO
1
2
3
1
2
3
TV/VIDEO
3 :
Col orSt ream HD1
Col orSt ream HD2
DVI
4 : Col orSt ream HD1
5 : Col orSt ream HD2
:
:
6
7
DVI
ANT
ANT
2
2
:
TV / V I DEO TO SELECT
0
-
7 : TO SELECT
Please note the following regarding
the DVI source selection:
Pressing TV/VIDEO on the
remote control displays the
current signal source (press TV/
VIDEO again or 0-7 to change)
Pressing TV/VIDEO on the TV
changes the current signal source
This TV is not intended for connection
to and should not be used with a PC
(personal computer). See “Connecting
a device to the DVI/HDCP input” on
page 13 for details.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding channels to the TV’s memory
Note:
When you press Channel y or z, your TV will stop only on the
To tune the TV to a channel not programmed
in the channel memory, you must use the
Channel Number buttons on the remote
control.
channels stored in the TV’s channel memory.
Follow the steps below and on the next page to program all active
channels into the TV’s memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them in its memory. After the channels are stored automatically,
you can manually add or erase individual channels (see “Adding and
erasing channels manually,” below).
To program channels automatically:
POWER
RECALL
INFO
TV/VIDEO
1. Press MENU, and then press x or • until the SET UP menu
appears.
1
4
2
5
8
3
6
2. Press y or z until the TV/CABLE is highlighted.
3. Press x or • to highlight either TV or CABLE, depending on
which you use. If you use an antenna, highlight TV; if you use
cable, highlight CABLE.
Channel
Number
9
CHRTN
7
+10
100
0
ENT
FAV
PIC
SI
ZE
ORITE
FAV
MENU
yzx •
MENU
DVDMENU
SET UP
LANGUAGE
ENGL I SH
- - : - -
CLOCK SET
ANT1 / 2
ANT1
ENTER
TV / CABLE
TV / CABLE
EXIT
CH PROGRAM
ADD / ERASE
T I LT CORRECT I ON
FAV
ADD
0
QU I C K CONNECT GU I DE
TV
Channel yz
CBL/SAT CH
VCR
VOL
DVD
4. Press z to select CH PROGRAM.
TV front panel
DEMO
MENU TV/VIDEO
VOLUME
CHANNEL
SET UP
LANGUAGE
ENGL I SH
- - : - -
CLOCK SET
ANT1 / 2
ANT1
TV / CABLE
CABLE
CH PROGRAM
ADD / ERASE
T I LT CORRECT I ON
ADD
0
QU I C K CONNECT GU I DE
x •zy
MENU
5. Press x or • to start channel programming. The TV will
automatically cycle through all the TV or Cable channels
(depending on which you selected), and store all active channels
in the channel memory.
While the TV is cycling through the channels, the message
“Programming Now—Please Wait” appears.
6. When channel programming is complete,the message
“Completed” appears.
7. Press Channel y or z to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can
manually add or erase specific channels.
To add or erase channels:
1. Select the channel you want to add or erase. If you are adding a
channel, you must select the channel using the Channel Number
buttons.
2. Press MENU, and then press x or • until the SET UP menu
appears.
(continued on next page)
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press y or z to highlight ADD/ERASE.
SET UP
LANGUAGE
ENGL I SH
- - : - -
CLOCK SET
ANT1 / 2
ANT1
TV / CABLE
CABLE
CH PROGRAM
ADD / ERASE
T I LT CORRECT I ON
ADD / ERASE
0
QU I C K CONNECT GU I DE
4. Press x or • to select ADD or ERASE, depending on the
function you want to perform.
5. Repeat steps 1-4 for other channels you want to add or erase.
POWER
RECALL
INFO
TV/VIDEO
Using the Quick Connect Guide
The Quick Connect Guide automatically starts the first time the TV
is turned on.
1
4
2
5
8
3
6
You can change the current settings any time.
9
CHRTN
7
1. Press MENU, and then press x or • until the SET UP menu
+10
100
0
ENT
appears.
FAV
PIC
2. Press y or z to highlight “QUICK CONNECT GUIDE”.
SIZE
ORITE
FAV
MENU
yzx •
MENU
DVDMENU
ENTER
SET UP
EXIT
FAV
LANGUAGE
ENGL I SH
- - : - -
CLOCK SET
ANT1 / 2
ANT1
TV
TV / CABLE
CABLE
CBL/SAT CH
VCR
VOL
CH PROGRAM
ADD / ERASE
T I LT CORRECT I ON
ADD
0
DVD
QU I C K CONNECT GU I DE
Note:
3. Press x or • to enter the Quick Connect Guide mode. Advance
the setup according to the guide displayed on the screen.
You can set up the following items.
To stop the Quick Connect Guide, press EXIT
or turnoff the TV.
On-screen display language selection
▼
Yes
No
Cable box selection (Yes/No)
▼
▼
Cable box connection
Cable or Antenna connection
▼
▼
Cable box output channel selection
(ch3/ch4)
TV (antenna)/Cable source selection
▼
▼
Select channels using Cable box
(Confirmation only)
Automatic channel programming
Clock setting
▼
Picture mode selection
▼
Basic setup has been completed
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing channels
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100).
For channels 100 and higher, press the 100 button, and then the
next two numbers. For example, to select channel 125, press 100,
2, 5.
POWER
RECALL
INFO
TV/VIDEO
1
4
2
5
8
3
6
Channel
Number
To change to the next programmed channel:
9
CHRTN
7
Press Channel y or z on the TV or remote control.
+10
100
0
ENT
Changing channels using SpeedSurf
To use SpeedSurf to change to a specific programmed channel:
FAV
PIC
SI
ZE
ORITE
FAV
MENU
DVDMENU
1. Press and hold Channel y or z for about one second. The TV
will enter the SpeedSurf mode.
ENTER
EXIT
FAV
TV
Channel yz
CBL/SAT CH
VCR
VOL
DVD
Upper channels
↑
16
13
11
7
TBS
ESPN
FOX
CBS
CNN
Current channel (highlighted)
4
TV front panel
↓
Lower channels
DEMO
MENU TV/VIDEO
VOLUME
CHANNEL
Channel label (if set)
2. Repeatedly press or hold Channel y or z while the SpeedSurf
mode is on-screen to scroll the channel list. Release the button to
display the highlighted channel.
x •zy
MENU
Channel zy
Adjusting the tilt correction feature
When you install the TV or change the direction of the TV, the
picture may suffer from color shading and/or tilt of the picture by the
terrestrial magnetism. If so, the following adjustment should be made
for the best possible picture.
POWER
RECALL
INFO
TV/VIDEO
1
4
7
2
5
8
3
6
To adjust the tilt correction:
1. Press MENU, then press x or • until the SET UP menu
9
CHRTN
appears.
+10
2. Press y or z to highlight TILT CORRECTION.
100
0
ENT
FAV
PIC
3. Press x or • to correct any tilt of the picture between +10 and
SI
ZE
ORITE
V
FA
-10.
MENU
yzx •
MENU
DVDMENU
ENTER
N
EXIT
FAV
SET UP
LANGUAGE
CLOCK SET
ANT1 / 2
ENGL I SH
- - : - -
ANT1
TV
CBL/SAT CH
VCR
VOL
DVD
TV / CABLE
CH PROGRAM
ADD / ERASE
CABLE
ADD
+
T I LT
CORRECT ION
7
GU I DE
QU I CK CONNECT
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV’s features
Adjusting the channel settings
Switching between two channels using Channel Return
The Channel Return feature allows you to switch between two
channels without entering an actual channel number each time.
POWER
RECALL
INFO
TV/VIDEO
TV/VIDEO
1
4
2
5
8
3
6
1. Select the first channel (or video mode) you want to view.
2. Select a second channel using the Channel Number buttons
(0–9, 100).
Channel
Number
9
CHRTN
7
+10
3. Press CH RTN. The previous channel will display.
100
0
ENT
CH RTN
Each time you press CH RTN, the TV will switch back and forth
between the last two channels that were selected.
FAV
PIC
SI
ZE
FAVORITE
MENU
DVDMENU
Switching between two channels using SurfLock™
The SurfLock™ feature temporarily “memorizes” one channel in the
CH RTN button, so you can return to that channel quickly from any
other channel by pressing CH RTN.
ENTER
EXIT
FAV
TV
CBL/SAT CH
VCR
VOL
DVD
To memorize a channel in the CH RTN button:
1. Select the channel you want to
program into the CH RTN
button.
2. Press and hold CH RTN for about
2 seconds until the message
CHANNEL MEMOR I ZED
ANT
1
“Channel Memorized” appears
(flashing) on the screen. The
channel has been programmed
into the CH RTN button.
CABLE
6
POWER
RECALL
TV/VIDEO
3. Continue to change channels until your desired channel is
selected.
INFO
1
4
7
2
3
6
4. Press CH RTN. The memorized channel will be selected.
5
8
The TV will return to the memorized channel one time only. Once
you press CH RTN and then change channels again, the CH RTN
button memory will be cleared and the button will function as
Channel Return, by switching back and forth between the last two
channels that were selected.
9
CHRTN
+10
100
0
ENT
FAV
PIC
SI
ZE
FAVORITE
MENU
yzx •
Programming your favorite channels
MENU
DVDMENU
You can preset up to 7 of your favorite channels each for FAVORITE
CH1 and FAVORITE CH2 modes using the Favorite Channel
Programming feature. Because this feature scans through only your
favorite channels, it allows you to skip other channels you do not
normally watch.
ENTER
EXIT
FAV
TV
CBL/SAT CH
VCR
VOL
DVD
To program your favorite channels:
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
2. Press y or z to highlight FAVORITE CH1 or FAVORITE CH2.
CUSTOM
T I MER
CUSTOM
T I MER
00h00m
0h00m
OFF
00h00m
0h00m
OFF
ON
SLEEP
CC
FAVOR I TE
FAVOR I TE CH2
CH LABEL I NG
V I
LABEL
ON
SLEEP
CC
FAVOR I TE
FAVOR I TE CH2
CH LABEL I NG
V I
LABEL
CH1
CH1
DEO
BACKGROUND
DEO
BACKGROUND
(continued on next page)
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
3. Press x or • to display the FAVORITE CH1 menu, for example.
• The FAV yz buttons operate as
MENU yz buttons when a menu is on-
screen.
CH INPUT will be highlighted.
• The favorite channel feature is not available
in ANT2 mode.
CUSTOM
T I MER
00h00m
0h00m
ON
SLEEP
CC
OFF
CH1
CH I NPUT
FAVOR I TE
FAVOR I TE CH2
CH LABEL I NG
0
0
0
0
0
0
0
V I
LABEL
DEO
TV CABLE
CLEAR ALL
BACKGROUND
4. Press the Channel Number buttons to enter one of your favorite
channels.
5. Press ENTER.
6. Repeat steps 4 and 5 for other channels.
To select your favorite channels:
Press FAV y or z.
POWER
RECALL
INFO
TV/VIDEO
To quickly scan through your favorite channels in a seven-picture
multi-window:
1
4
2
5
8
3
6
Press FAVORITE (see page 34).
Channel
Number
9
CHRTN
7
+10
To clear a favorite channel:
100
0
ENT
FAVORITE
1. Press MENU, and then press x or • until the CUSTOM menu
FAV
PIC
SI
ZE
appears.
FAVORITE
2. Press y or z to highlight FAVORITE CH2, for example.
MENU
MENU
DVDMENU
yzx •
3. Press x or • to display the FAVORITE CH2 menu.
ENTER
FAV yz
EXIT
FAV
ENTER
TV
CBL/SAT CH
VCR
VOL
CUSTOM
T I MER
DVD
00h00m
0h00m
ON
SLEEP
CC
OFF
CH1
FAVOR I TE
FAVOR I TE CH2
CH LABEL I NG
CH I NPUT
2
6
18
8
20
V I
LABEL
DEO
15
0
BACKGROUND
TV CABLE
CLEAR ALL
4. Press yzx • to highlight the channel you want to clear, then
press ENTER.
CUSTOM
T I MER
00h00m
0h00m
ON
SLEEP
CC
OFF
CH1
FAVOR I TE
FAVOR I TE CH2
CH LABEL I NG
CH I NPUT
2
6
18
8
20
V I
LABEL
DEO
15
0
BACKGROUND
TV CABLE
CLEAR ALL
5. Repeat step 4 for other channels.
To clear all favorite channels at once:
Press y or z to highlight CLEAR ALL in step 4 above, and then
press x or • to clear all favorite channels at once.
CUSTOM
T I MER
00h00m
0h00m
OFF
ON
SLEEP
CC
CH1
FAVOR I TE
FAVOR I TE CH2
CH LABEL I NG
CH I NPUT
0
0
0
0
0
0
0
V I
LABEL
DEO
BACKGROUND
TV CABLE
CLEAR ALL
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Labeling channels
Channel labels appear above the on-screen channel number display
each time you turn on the TV, change a channel, or press RECALL.
You can choose any four characters to identify a channel.
POWER
RECALL
INFO
TV/VIDEO
RECALL
To create channel labels:
1
4
2
5
8
3
6
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
Channel
Number
9
CHRTN
7
2. Press y or z to highlight CH LABELING.
3. Press x or • to display the CH LABELING menu.
CH INPUT will be highlighted.
+10
100
0
ENT
FAV
PIC
SI
ZE
FAVORITE
MENU
MENU
DVDMENU
yzx •
ENTER
CUSTOM
T I MER
EXIT
FAV
00h00m
0h00m
ON
ENTER
SLEEP
CC
OFF
TV
CBL/SAT CH
VCR
VOL
CH1
FAVOR I TE
FAVOR I TE CH2
DVD
LABEL I NG
LABEL
CH I NPUT
LABEL
CLEAR
CH
V I
– – – –
DEO
BACKGROUND
4. Press the Channel Number buttons to select a channel you want
to label.
CUSTOM
T I MER
00h00m
0h00m
ON
SLEEP
CC
OFF
CH1
FAVOR I TE
FAVOR I TE CH2
LABEL I NG
LABEL
CH I NPUT
LABEL
CLEAR
6
CH
V I
– – – –
DEO
BACKGROUND
5. Press z to highlight LABEL.
6. Press x or • repeatedly to select a character for the first space,
and then press ENTER.
CUSTOM
T I MER
00h00m
0h00m
ON
SLEEP
CC
OFF
CH1
FAVOR I TE
FAVOR I TE CH2
LABEL I NG
LABEL
CH I NPUT
LABEL
CLEAR
6
CH
V I
A– – –
DEO
BACKGROUND
7. Repeat step 6 to enter the rest of the characters.
If you would like a blank space in the label name, you must
choose an empty space from the list of characters. Otherwise, a
dash “–” will appear in that space.
8. Repeat steps 4–7 for other channels. You can assign labels to a
maximum of 32 channels.
To erase channel labels:
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
2. Press y or z to highlight CH LABELING.
3. Press x or • to display the CH LABELING menu.
4. Select the channel you want to clear with the Channel Number
buttons.
(continued on next page)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press z to highlight CLEAR.
CUSTOM
T I MER
00h00m
0h00m
ON
SLEEP
CC
OFF
CH1
FAVOR I TE
FAVOR I TE CH2
LABEL I NG
LABEL
CH I NPUT
LABEL
CLEAR
6
CH
V I
ABCD
DEO
BACKGROUND
6. Press x or • to erase the channel label.
7. Repeat steps 4–6 to erase other channel labels.
Viewing the wide-screen picture formats
POWER
RECALL
INFO
TV/VIDEO
You can view programs that have the conventional TV picture
format (4:3 aspect ratio) and the wide-screen format (16:9 aspect
ratio). This feature is available for TV or DVD video signals input
from the VIDEO 1-3, ColorStream HD1, HD2 and DVI jacks.
1
4
2
5
8
3
6
Number
9
CHRTN
7
Selecting the image shape
1. Make sure the VIDEO 1-3, ColorStream HD1, HD2 or DVI
mode is selected. (See page 44 for details.)
+10
100
0
ENT
FAV
P
IC
SIZE
PIC SIZE
FAVORITE
2. Press PIC SIZE repeatedly to select either Normal, Compression,
or Zoom image shape, as described below.
MENU
DVDMENU
yzx •
• 480i/480p signal source/VIDEO 1-3:
→ NORMAL → COMPRESSION → ZOOM
ENTER
EXIT
FAV
TV
• 1080i/720p signal source:
CBL/SAT CH
VCR
VOL
DVD
→ NORMAL → COMPRESSION
Note: The message “Not Available” will appear when the PIC SIZE button
is pressed in the TV mode.
HD1 I MAGE SHAPE
:
:
:
0
1
2
NORMAL
COMPRESS I ON
ZOOM
-
0
2 : TO SELECT
While the above menu is on-screen, select the desired picture size by
pressing the corresponding number button (0–2).
Normal mode
The Normal picture size displays the picture in the conventional 4:3
aspect ratio. A wide (16:9) picture signal is stretched vertically to fill
the screen.
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
Wide (16:9) signal
Normal mode
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Compression
Note:
• The picture is vertically compressed, with black bars at the top
and bottom.
You can also change the image shape using
the menu system. Select IMAGE SHAPE in
the THEATER menu.
•
The exact image is reproduced and the picture quality is better
because of more effective use of scanning lines.
THEATER
WOW
SRS 3D
FOCUS
OFF
OFF
OFF
TruBass
I MAGE SHAPE
AUTO ASPECT
C I NEMA MODE
OFF
V I DEO
Squeezed signal
Compression mode
Zoom
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
A picture is expanded by 1.33 times.
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
Wide (16:9) signal
Zoom mode
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the auto aspect feature
When receiving 480i signal, the TV will automatically change the
Note:
image shape by reading aspect information (ID-1 data) from the input • This feature does not operate for the
antenna (cable) and DVI input sources.
signal. If the signal does not include aspect information (ID-1 data),
the image shape mode you set is selected.
• The image shape selection is possible even
when the auto aspect is active (ON). In this
case, the image shape you selected is valid
until the input source is changed or auto
aspect is turned ON again.
To turn on the auto aspect:
1. Press MENU, and then press x or • until the THEATER menu
appears.
• If the signal includes incorrect aspect
information (ID-1 data), the picture will
deteriorate and auto aspect may not
operate correctly. In such a case, turn OFF
the auto aspect.
THEATER
WOW
OFF
OFF
OFF
SRS 3D
FOCUS
T r u B a s s
I MAGE SHAPE
AUTO ASPECT
C I NEMA MODE
OFF
VIDEO
2. Press y or z to highlight AUTO ASPECT, and then press x or
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
• to select ON.
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
THEATER
WOW
OFF
OFF
OFF
SRS 3D
FOCUS
T r u B a s s
I MAGE SHAPE
AUTO ASPECT
C I NEMA MODE
ON
VIDEO
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
Aspect information (ID-1 data) Image shape to be selected
4:3 Normal
16:9 Full
4:3 Letter box
Not Defined
Normal
Compression
Normal
User-set mode
POWER
RECALL
INFO
TV/VIDEO
1
4
2
5
8
3
6
Selecting the cinema mode
When you view a DVD movie (3-2 pulldown processed) from a DVD
player connected to the ColorStream (component video) or DVI/
HDCP inputs on the TV, smoother and more natural motion can be
obtained by setting the CINEMA MODE to FILM (auto).
9
CHRTN
7
+10
100
0
ENT
FAV
PIC
SI
ORITE
V
ZE
To set the CINEMA MODE to FILM (auto):
FA
1. Press MENU, and then press x or • until the THEATER menu
MENU
yzx •
MENU
DVDMENU
appears.
ENTER
2. Press y or z to highlight CINEMA MODE.
N
EXIT
FAV
3. Press x or • to select FILM (auto).
TV
CBL/SAT CH
VCR
VOL
DVD
THEATER
WOW
OFF
OFF
OFF
SRS 3D
FOCUS
T r u B a s s
I MAGE SHAPE
AUTO ASPECT
C I NEMA MODE
OFF
FILM / VIDEO
To set the CINEMA MODE to VIDEO (off):
Press x or • to select VIDEO in step 3 above.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
Using the POP double-window feature
• The SPLIT buttons on the remote control
operate the TV’s POP features.
The POP (picture-out-picture) feature splits the screen into a double
window that allows you to watch two programs at the same time. The
POP program can come from a TV broadcast or an external source,
such as a VCR.
• You cannot access POP features when
viewing DVI input.
• You cannot display the ANT-2 signal source
in the POP window.
To display a TV broadcast in the POP window:
1. Press SPLIT to display the POP window.
• You can choose to hear the sound of either
the main or POP program (see “Selecting
dthe Audio OUT sound” on page 51).
Main window
POP window
1
4
2
5
8
3
6
POP
12
Channel
Number
9
CHRTN
7
+10
100
0
ENT
2. Select channels of the POP window in the following two ways:
FAV
PI
C
S
IZE
VORITE
FA
• To change to a specific channels, press POP DIRECT CH.
While “POP” is on the screen, press the Channel Number
buttons (0-9 and 100).
MENU
DVDMENU
ENTER
• To change the next programmed channels, press POP CH
EXIT
EXIT
FAV
zy.
TV
If the V-CHIP feature is active and you try to watch a TV
program that exceeds your set rating limits, the program will be
blocked (see “Using the V-CHIP menu” on page 36).
CBL/SAT CH
VCR
VOL
DVD
POP DIRECT CH
SPLIT
POP DIRECT CH MUTE
SLEEP
TV/VCR PAUSE
STOP
PLAY
SPLIT
FREEZE SOURCE
REW
FF
SKIP/SEARCH
SOURCE
CH SCAN
REC
SWAP
POP CH
LIGHT
POP CH zy
POP
24
BLOCKED
To display a picture from an external source in the POP window:
1. Connect the external source equipment (see “Connecting your
TV” on page 7).
2. Select the TV program you want to watch in the main window.
3. Press SPLIT to display the POP window.
4. Repeatedly press SOURCE to select the input source for the POP
window (VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1,
or ColorStream HD2 only; you cannot select DVI in POP
mode). The current source will display in purple.
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
5. You can play a tape as the POP picture, or select a channel for the
POP window using the VCR’s channel keys.
POP SOURCE SELECT I ON
0 : TV
1 : V IDEO
V IDEO
1
2
3
2 :
3 : V IDEO
4 : Color Stream HD1
5 : Color Stream HD2
0 - 5 : TO SELECT
While the above menu is on the screen, you can select the desired signal
input source by pressing the corresponding number button (0-5).
To close the POP window:
Press SPLIT again or EXIT.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the main and POP pictures
Press SWAP while you are using the POP feature to switch the main
and POP pictures.
FAV
PI
C
S
IZE
FAVORITE
MENU
DVDMENU
x •
ENTER
EXIT
EXIT
FAV
Freezing the POP picture
1. Press FREEZE while the POP is not on the screen.
The POP window will appear with a still picture.
TV
CBL/SAT CH
VCR
VOL
DVD
POP DIRECT CH MUTE
SLEEP
FREEZE
SWAP
2. Press FREEZE again to renew the still picture.
TV/VCR PAUSE
STOP
PLAY
SPLIT
FREEZE SOURCE
REW
FF
SKIP/SEARCH
CH SCAN
REC
SWAP
POP CH
LIGHT
To erase the still POP window:
Press EXIT.
Still picture
Note:
If the signal format other than 480i is
received, this feature is not available. “Not
available” will appear on the screen.
Adjusting the size of the double-window
When the input signals of the main and POP pictures are 480i, you
can adjust the size of each window. Continuously pressing x or •
changes the size in 9 steps.
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Double-Window with keeping aspect ratio
The Double-Window displays the pictures with various aspect ratio
according to the input signal format.
Note:
The auto aspect feature does not operate in
the Double-Window mode.
FAV
PI
C
S
IZE
480i
480i
FAVORITE
480p/720p/1080i
480i
MENU
DVDMENU
yzx •
ENTER
EXIT
FAV
ENTER
TV
CBL/SAT CH
VCR
VOL
DVD
POP DIRECT CH MUTE
SLEEP
TV/VCR PAUSE
STOP
PLAY
SPLIT
480i
480p/720p/1080i
480p/720p/1080i 480p/720p/1080i
FREEZE SOURCE
CH SCAN
REW
FF
SKIP/SEARCH
CH SCAN
REC
SWAP
POP CH
LIGHT
Using the programmed channel search function
You can use the programmed channel search function to quickly scan
your programmed channels (see “Adding channels to TV’s memory ”
on page 22).
Note:
1. Press CH SCAN.
This feature does not operate in the DVI
mode.
The TV automatically enters POP mode, and begins a seven-
picture scan of your programmed channels in the POP window.
3
4
5
6
7
8
9
CABLE
10
10
2. Press yzx • to select one of the seven pictures (becomes a
moving picture). The main picture is an always moving picture.
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
3. Press ENTER to display the channel you selected in step 2 as a
normal picture.
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
Moving picture
3
4
5
6
7
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
8
9
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the favorite channel search function
You can use the favorite channel search function to quickly scan your
favorite channels (see “Programming your favorite channels” on page
25).
POWER
RECALL
INFO
TV/VIDEO
1
4
2
5
8
3
6
1. Press FAVORITE.
The TV automatically enters POP mode, and begins a seven-
picture scan of your favorite channels in the POP window.
9
CHRTN
7
+10
3
4
5
6
7
100
0
ENT
FAVORITE
FAV
PIC
SIZE
FAVORITE
MENU
DVDMENU
8
9
yzx •
ENTER
EXIT
FAV
CABLE
6
6
ENTER
TV
CBL/SAT CH
VCR
VOL
DVD
2. Press yzx • to select one of the seven pictures (becomes a
moving picture). The main picture is an always moving picture.
3. Press ENTER to display the channel you selected in step 2 as a
normal picture.
Moving picture
Note:
3
4
5
6
7
This feature does not operate in the DVI
mode.
8
9
6
Every time you press FAVORITE, the POP window scans your
favorite channels in the following order:
FAVORITE CH1 — FAVORITE CH2 — Off
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON TV PICTURE TUBE
About the auto favorite feature
If your TV is in the program lock mode, after 4 seconds, the TV starts
the auto favorite channel search function. See page 38 for details.
Avoid displaying stationary images on
your TV screen for extended periods of
time. Fixed (non-moving) images (such
as still PIP/POP windows or black/gray
bars in wide-screen picture or PIP/POP
formats) can become permanently
engrained in the picture tube. This type
of damage is NOT COVERED BY
YOUR WARRANTY because it is the
result of misuse. See item 33 on page 4.
3
4
5
6
7
TH IS PROGRAM
HAS BEEN BLOCKED!
TV–PG
L
V
8
EXCEEDS SET L I M I TS
PUSH MUTE
TO ENTER PIN
CABLE
9
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the LOCKS menu
Note:
The LOCKS menu includes the V-Chip, CH Lock, Video Lock, and
New PIN Code functions. You can use these functions after entering
the correct PIN code.
The V-Chip function is available only for the
U.S. V-Chip system. The Canadian V-Chip
system is not supported.
Entering the PIN code
1. Press MENU, and then press x or • until the LOCKS menu
appears.
POWER
RECALL
INFO
TV/VIDEO
RECALL
Number
1
4
2
5
8
3
6
LOCKS
V–CH I P
ENABLE BLOCK I NG OFF
TV RAT I NG
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
9
CHRTN
7
+10
V I DEO LOCK
OFF
OFF
OFF
GAME TIMER
100
0
ENT
FRONT PANEL LOCK
NEW P I N CODE
FAV
PIC
SI
ZE
FAVORITE
2. Press y or z to display the PIN code entering mode.
MENU
MENU
DVDMENU
• Blocking Reset status:
• When the PIN code is already stored:
yzx •
ENTER
Set your 4-digit code by pressing
the Number buttons (0–9), and
then press ENTER.
Press the Number buttons (0-9) to enter
the 4-digit PIN code used for blocking
channels, and then press ENTER.
EXIT
FAV
ENTER
TV
CBL/SAT CH
VCR
VOL
DVD
LOCKS
LOCKS
BLOCK I NG RESET
P I N CODE
BLOCK I NG ACT I VE
P I N CODE 1 23 4
11 10
If the wrong PIN code is entered, the message “Incorrect”
appears. Enter the code again, and then press ENTER.
If you cannot remember your PIN code
While the PIN code entering screen is displayed, press RECALL
four times within five seconds. The PIN code will be released
(Blocking Reset status restored).
LOCKS
V–CH I P
ENABLE BLOCK I NG ON/OFF
TV RAT I NG
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
V I DEO LOCK
OFF
OFF
OFF
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
Continue to set each item following the steps on the next page.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the V-CHIP menu
Note:
Some TV programs and movies include signals that classify the
content of the program (violence, sex, dialog, language). The V-CHIP
conrol feature in this TV detects the signals and blocks the programs
according to your selections. To use this feature, perform the
following setup.
The V-Chip function is available only for the
U.S. V-Chip system. The Canadian V-Chip
system is not supported.
ENABLE BLOCKING
1. From the LOCKS menu, select ENABLE BLOCKING.
2. Press x or • to select ON or OFF.
LOCKS menu
LOCKS
ON : To enable your setting (Lock)
V–CH I P
ENABLE BLOCK I NG ON/OFF
TV RAT I NG
OFF: To release your setting (Unlock)
Note: The CH LOCK function is not affected with this selection.
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
OFF
OFF
OFF
V I DEO LOCK
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
TV RATING (Independent rating system for
broadcasters)
1. From the LOCKS menu, select TV RATING.
To select each item:
Press z or y .
2. Press x or • to display
the TV RATING menu.
LOCKS
3. Press z or y to select item.
TV RAT I NG MA 14 PG
DI ALOG
LANGUAGE
G
Y
POWER
RECALL
INFO
TV/VIDEO
4. Press • to lock (display “X” )
SEX
V I OLENCE
NO DLSV
YOUTH TV RAT I NG
Y7FV Y7
RECALL
Press x to unlock (display “✓ ”)
1
4
2
5
8
3
6
V–CH I P MENU
5. Repeat steps 3 and 4 to set
the next item.
9
CHRTN
7
The TV age-based ratings and content themes you can be lock are
listed in the table below.
+10
100
0
ENT
FAV
PIC
SI
ZE
Ratings
MA
Description and Content themes
FAVORITE
Mature Audience Only (This program is specifically
designed to be viewed by adults and therefore may be
unsuitable for children under 17.)
MENU
DVDMENU
yzx •
ENTER
L) Crude or indecent language S) Explicit sexual activity
V) Graphic violence
EXIT
FAV
TV
CBL/SAT CH
VCR
VOL
14
Parents Strongly Cautioned (This program contains some
material that many parents would find unsuitable for
children under 14 years of age.)
D) Intensely suggestive dialog L) Strong, coarse language
S) Intense sexual situations V) Intense violence
DVD
Press RECALL to display the rating of
the TV program you are currently
PG
Parental Guidances Suggested (This program contains
material that parents may find unsuitable for younger
children.)
D) Some suggestive dialog L) Infrequent coarse
language S) Some sexual situations V) Moderate
violence
watching.
STEREO
SAP
TV – PG
L
V
PG
L
V
G
General Audience (Most parents would find this program
suitable for all ages.)
ANT
1
NORMAL
CLOCK
9
: 2 5
CABLE
6
33 34 35
Y7,
Directed to Older Children (This program is designed for
Y7FV children age 7 and above. Note: Programs in which fantasy
violence may be more intense or more combative than other
programs in this category are designated Y7FV.)
Y
All Children (This program is designed to be appropriate for
all children.)
36
Download from Www.Somanuals.com. All Manuals Search And Download.
MPAA RATING (Independent rating system for movies)
1. From the LOCKS menu, select MPAA RATING.
LOCKS menu
2. Press x or • to display the MPAA RATING menu, then press z
or y to highlight MPAA RATING.
LOCKS
V–CH I P
ENABLE BLOCK I NG ON
TV RAT I NG
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
LOCKS
V I DEO LOCK
OFF
OFF
OFF
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
MPAA RAT I NG
X
NC17
R
PG13 PG
G
V–CH I P MENU
To select each item:
Press z or y .
3. Press • to lock (“X”) or press x to unlock (“✓”).
The movie ratings you can lock are described as follows:
X
: X-rated (For adults only)
NC17: Not intended for anyone 17 and under
R
: Restricted (Under 17 requires accompanying parent or adult
guardian.)
PG13 : Parents Strongly Cautioned (Some material may be
inappropriate for children under 13)
PG : Parental Guidance Suggested (Some material may not be
suitable for children)
G
: General Audience (Appropriate for all ages)
POWER
RECALL
INFO
TV/VIDEO
BLOCKING OPTION
1
4
2
5
8
3
6
1. From the LOCKS menu, select BLOCKING OPTION.
2. Press x or • to display the BLOCKING OPTION menu,
then press y or z to select item.
9
CHRTN
7
+10
MPAA UNRATED:
100
0
ENT
Press x or • to select ON (Lock) or OFF (Unlock) for unrated
programs in the MPAA rating system.
FAV
PIC
SI
ZE
FAVORITE
MENU
DVDMENU
yzx •
ENTER
LOCKS
V–CH I P
LOCKS
N
EXIT
FAV
BLOCK I NG OPT I ON
MPAA UNRATED
TV NONE RATING
V–CH I P MENU
ENABLE BLOCK I NG ON
TV RAT I NG
ON
/OFF
OFF
TV
MPAA RAT I NG
CBL/SAT CH
VCR
VOL
BLOCK I NG OPT I ON
CH LOCK
DVD
V I DEO LOCK
OFF
OFF
OFF
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
Caution
TV NONE RATING
Be aware that setting the TV None Rating to
Press x or • to select ON (Lock) or OFF (Unlock) for programs
rated NONE in the TV PARENTAL GUIDELINES.
ON may block the broadcast of emergency
information.The menu will display the note,
“Enabling this option may block emergency
messages” to warn you of this possibility.
LOCKS
BLOCK I NG OPT I ON
ON
ON
MPAA UNRATED
TV NONE RATING
V–CH I P MENU
/OFF
NOTE : ENABL I NG TH I S
OPT I ON MAY BLOCK
EMERGENCY MESSAGES
V-CHIP MENU:
Press x or • to return to the LOCKS menu.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Unlocking programs temporarily
1. If you try to watch a TV program that exceeds the rating limits
you set, the TV enters program lock mode. After 4 seconds, the
TV starts the auto favorite channel search function (see page 34).
You can either unlock the program temporarily (see steps 2-4) or
select a non-locked program to watch.
After 4 seconds
3
4
5
6
7
THIS PROGRAM HAS BEEN BLOCKED!
TV–PG
TH IS PROGRAM
HAS BEEN BLOCKED!
L
V
EXCEEDS SET L I M I TS
TV–PG
L
V
8
EXCEEDS SET L I M I TS
PUSH MUTE TO ENTER PIN
PUSH MUTE
TO ENTER PIN
CABLE
9
CABLE
9
POWER
2. To temporarily unlock the program, press MUTE.
RECALL
INFO
TV/VIDEO
3. Press the Number buttons (0-9) to enter your 4-digit PIN code.
1
4
2
5
8
3
6
BLOCKI NG ACTI VE
Channel
Number
9
CHRTN
7
ENTER P I N CODE
+10
TO TEMPORARI LY UN–BLOCK
100
0
ENT
––––
FAV
PIC
SI
ZE
FAVORITE
0 –9 : TO SELECT ENTER: TO SET
MENU
DVDMENU
yzx •
4. Press ENTER.
ENTER
EXIT
FAV
If the correct code is entered, the program lock mode is released
and the normal picture appears.
ENTER
TV
CBL/SAT CH
VCR
VOL
DVD
All locking is disabled until the TV is turned off, and will be
enabled when the TV is turned on again.
POP DIRECT CH MUTE
SLEEP
MUTE
Locking channels
With the CH LOCK feature, you can lock specific channels. The TV
will not be able to tune locked channels with the Channel y z
buttons or Channel Number buttons, unless you clear the setting.
LOCKS menu
You can lock a maximum of nine channels.
To lock channels:
LOCKS
V–CH I P
1. From the LOCKS menu, select CH LOCK.
ENABLE BLOCK I NG ON
TV RAT I NG
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
2. Press x or • to display the CH LOCK menu.
V I DEO LOCK
OFF
OFF
OFF
CH INPUT will be highlighted.
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
3. Press the Channel Number buttons to enter the channel you
want to lock.
To select each item:
4. Press ENTER.
Press z or y .
LOCKS
V–CH I P
LOCKS
V–CHIP
ENABLE BLOCK ING OFF
TV RATI NG
MPAARATI NG
ENABLE BLOCKING OFF
TV RAT I NG
MPAA RATI NG
BLOCK I NG OPTION
BLOCK ING OPTION
CH LOCK
CH INPUT
12
0
CH LOCK
CH INPUT
VIDEO LOCK
0
0
0
0
0
0
VIDEO LOCK
12
0
0
0
0
0
0
0
0
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
0
0
TV CABLE
TV CABLE
CLEAR ALL
CLEAR ALL
38
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Repeat steps 3 and 4 for other channels.
To unlock individual channels:
1. From the LOCKS menu, select CH LOCK.
2. Press x or • to display the CH LOCK menu.
3. Press yzx • to highlight the channel you want to unlock, then
press ENTER.
LOCKS
V–CHIP
LOCKS
V–CHIP
ENABLE BLOCK ING ON
TV RATI NG
ENABLE BLOCK ING ON
TV RATI NG
MPAA RATI NG
MPAA RAT I NG
NG
BLOCK I
CH LOCK
VIDEO LOCK
OPT ION
CH INPUT
12 18 26
33
BLOCK ING OPT ION
CH LOCK
CH INPUT
12 18 33
VIDEO LOCK
0
0
0
0
0
0
0
GAME TIMER
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
0
0
0
0
FRONT PANEL LOCK
NEW P I N CODE
TV CABLE
CLEAR ALL
TV CABLE
CLEAR ALL
POWER
RECALL
INFO
TV/VIDEO
4. Repeat step 3 for other channels.
To unlock all locked channels at once:
1
4
2
5
8
3
6
Press y or z to highlight CLEAR ALL, and then press x or •.
9
CHRTN
7
+10
100
0
ENT
FAV
PIC
SI
ZE
LOCKS
FAVORITE
V–CHIP
ENABLE BLOCK ING ON
TV RATI NG
MPAA RAT I NG
MENU
DVDMENU
NG
BLOCK I
OPT ION
yzx •
CH LOCK
VIDEO LOCK
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
CH INPUT
0
0
0
0
0
0
0
0
0
ENTER
N
EXIT
TV CABLE
FAV
CLEAR ALL
ENTER
TV
CBL/SAT CH
VCR
VOL
DVD
Locking video inputs
With the VIDEO LOCK feature, you can lock out the input sources
(Video 1, Video 2, Video 3, ColorStream HD1, ColorStream HD2,
DVI/HDCP) and channels 3 and 4.
You will not be able to select the input sources with the TV/VIDEO
button or Channel buttons unless you clear the setting.
To set up the video lock:
1. From the LOCKS menu, select VIDEO LOCK.
2. Press x or • to highlight the level of video locking you want
(Video, Video+, or Off), as follows:
VIDEO : Locks Video 1, Video 2, Video 3, ColorStream HD1,
HD2, and DVI/HDCP.
VIDEO+ : Locks Video 1, Video 2, Video 3, ColorStream,
HD1/HD2, DVI/HDCP, and channels 3 and 4. This
option should be used if you use the antenna terminal
to play a video tape.
Note: Make sure the POP is not on channel 3 or 4.
OFF
: Unlocks all video input sources.
LOCKS
V–CH I P
ENABLE BLOCK I NG ON
TV RAT I NG
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
+
V I DEO LOCK
V I DEO/ V I DEO / OFF
GAME TIMER
FRONT PANEL LOCK
OFF
NEW P I N CODE
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the game timer
Note:
This feature allows you to restrict the time which has chosen the video
mode. When the time set up beforehand is passed, the last tuned channel
will be selected automatically (The VIDEO LOCK is set to VIDEO).
After the game timer operates, set the VIDEO
LOCK to “OFF” if necessary.
To set the game timer:
1. From the LOCKS menu, select GAME TIMER.
2. Press x or • to select the length of time until the video mode is
blocked from among 30, 60, 90 and 120 minutes. When the
number is highlighted, the timer will start countdown.
LOCKS
V–CH I P
ENABLE BLOCK I NG ON
TV RAT I NG
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
OFF
V I DEO LOCK
OFF/ 30/ 60 / 90 / 120
OFF
GAME TIMER
FRONT PANEL LOCK
NEW P I N CODE
To cancel the timer:
Select OFF in step 2 above.
Using the front panel lock feature
TV front panel
Lock the front panel buttons to prevent the buttons from being
pressed accidentally (by children, for example). When the front panel
lock is in ON, all control buttons on the TV front panel (except
POWER) do not operate.
DEMO
MENU TV/VIDEO
VOLUME
CHANNEL
To lock the front panel:
1. From the LOCKS menu, select FRONT PANEL LOCK.
2. Press x or • to highlight ON.
Buttons to be locked
TV front panel
DEMO
MENU TV/VIDEO
VOLUME
CHANNEL
LOCKS
V–CH I P
ENABLE BLOCK I NG
TV RAT I NG
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
V I DEO LOCK
OFF
OFF
ON/OFF
GAME TIMER
FRONT RANEL LOCK
NEW P I N CODE
VOL x
If a button on the front panel is pressed, the message “Not
Available” appears.
To unlock the front panel:
POWER
RECALL
INFO
TV/VIDEO
Highlight OFF in step 2 above, or press and hold the VOL x
button on the TV for about 10 seconds until the message “Front
Panel Lock: Off” appears on the screen.
1
4
7
2
5
8
3
6
Number
9
CHRTN
Changing the PIN code
1. From the LOCKS menu, select NEW PIN CODE.
+10
100
0
ENT
FAV
PIC
SI
ZE
2. Press the Number buttons (0-9) to enter a 4-digit code.
The numbers you enter will replace the dashes in the display.
FAVORITE
MENU
DVDMENU
yzx •
ENTER
N
EXIT
FAV
LOCKS
ENTER
V–CH I P
ENABLE BLOCK I NG ON
TV RAT I NG
TV
CBL/SAT CH
VCR
VOL
MPAA RAT I NG
BLOCK I NG OPT I ON
CH LOCK
DVD
V I DEO LOCK
V I DEO
OFF
GAME TIMER
FRONT RANEL LOCK
OFF
NEW P I N CODE
2562
3. Press ENTER.
The new PIN code is now active.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the picture
Selecting the picture mode
Note:
You can select your desired picture type from four picture modes:
Sports, Standard, Movie, and Preference.
If you select one of the factory-set picture
modes (SPORTS, STANDARDS, or MOVIE)
and then change a picture quality setting (for
example, increase the contrast), the picture
mode automatically changes to
Mode
Picture Quality
Sports
Standard
Movie
Bright and dynamic picture (factory setting)
Standard picture setting (factory setting)
Movie-like picture setting (factory setting)
PREFERENCE in the Picture menu.
To save your new picture quality settings, you
must select SAVE NEW PREFERENCE (see
page 42) before closing the Picture menu or
the TV will return to the previous picture
mode.
Preference Your personal preference*
*(see “Saving new preference” on page 42.)
To select the picture mode:
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press z or y to select MODE.
TV front panel
3. Press x or • to highlight the mode you prefer.
DEMO
MENU TV/VIDEO
VOLUME
CHANNEL
P I CTURE ANTENNA
MODE
SPORTS / STANDARD / MOVI E / PREFERENCE
CONTRAST
BR IGHTNESS
COLOR
8 0
5 0
5 0
0
x •zy
MENU
T I NT
5 0
SHARPNESS
RESET
SAVE NEW
PREFERENCE
Adjusting the picture quality
POWER
RECALL
You can adjust the picture quality to your personal preferences,
including the contrast, brightness, color, tint, sharpness, flesh tone,
noise reduction and color temperature.
TV/VIDEO
INFO
1
2
3
6
4
7
5
8
Selection
x Pressing •
9
CHRTN
contrast
brightness
color
lower
darker
paler
higher
lighter
deeper
greenish
sharper
+10
100
0
ENT
FAV
PIC
SI
ZE
tint
sharpness
reddish
softer
FAVORITE
MENU
yzx •
MENU
DVDMENU
To adjust the picture quality:
ENTER
EXIT
FAV
1. Press MENU, and then press x or • until the PICTURE menu
TV
appears.
CBL/SAT CH
VCR
VOL
DVD
2. Press z or y until the item you want to adjust is highlighted.
3. Press x or • to adjust the level.
P I CTURE ANTENNA
MODE
PREFERENCE
CONTRAST
BR IGHTNESS
COLOR
7 5
5 0
5 0
0
T I NT
5 0
SHARPNESS
RESET
SAVE
PREFERENCE
NEW
The PICTURE qualities you adjusted can be saved in the TV’s
memory with the SAVE NEW PREFERENCE feature (see page 42).
You can keep these settings or choose factory set options, as described
under “Selecting the picture mode” above.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Saving new preference
You can save the PICTURE qualities (contrast, brightness, color, tint,
and sharpness) you adjusted in the picture preference mode.
POWER
RECALL
INFO
TV/VIDEO
To save your new preferences:
1
4
2
5
8
3
6
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight SAVE NEW PREFERENCE.
9
CHRTN
7
+10
3. Press x or •. When complete, the menu displays “DONE”.
100
0
ENT
FAV
PIC
SI
ZE
FAVORITE
MENU
yzx •
MENU
DVDMENU
P I CTURE ANTENNA
MODE
PREFERENCE
ENTER
CONTRAST
BR IGHTNESS
COLOR
7 5
5 0
5 0
0
EXIT
FAV
T I NT
5 0
SHARPNESS
RESET
SAVE NEW
TV
CBL/SAT CH
VCR
VOL
PREFERENCE
DONE
DVD
The mode automatically change to PREFERENCE (see “Selecting the
picture mode” on page 41).
Using the flesh tone feature
This feature displays natural flesh tones by correcting the tint.
To turn on the flesh tone feature:
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight FLESH TONE.
3. Press x or • to highlight ON.
P I CTURE ANTENNA
MODE
PREFERENCE
FLESH TONE
CableClear DNR
COLOR
ON/ OFF
OFF
TEMPERATURE
DISPLAY FORMAT
MEDIUM
1080 i
PREFERENCE
SAVE NEW
Using the CableClear™ DNR feature
This feature allows you to reduce visible interference in your TV
picture. This is useful when receiving a broadcast with a weak signal
(especially Cable channel) or playing back a video cassette or disc
damaged by repeated use.
Note:
• This feature is not available for the DVI
mode (fixed to OFF).
• “CableClear DNR” display will change to
“DNR” in the ColorStream mode.
To turn on CableClear™ DNR:
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight CableClear DNR.
3. Press x or • to highlight AUTO.
P I CTURE ANTENNA
MODE
PREFERENCE
FLESH TONE
CableClear DNR
COLOR
ON
AUTO / OFF
TEMPERATURE
DISPLAY FORMAT
MEDIUM
1080 i
PREFERENCE
SAVE NEW
To turn off CableClear DNR:
Highlight OFF in step 3 above.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the color temperature
You can change the quality of the picture by selecting from three
preset color temperatures: cool, medium, and warm.
POWER
RECALL
INFO
TV/VIDEO
To select the color temperature:
1
4
2
5
8
3
6
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight COLOR TEMPERATURE.
9
CHRTN
7
+10
3. Press x or • to highlight the mode you prefer.
100
0
ENT
FAV
PIC
SI
ZE
Mode
Picture Quality
FAVORITE
cool
blueish
MENU
yzx •
MENU
DVDMENU
P I CTURE ANTENNA
PREFERENCE
medium neutral
warm reddish
MODE
FLESH TONE
CableClaar DNR
COLOR
ON
ENTER
AUTO
EXIT
TEMPERATURE
DISPLAY FORMAT
COOL /MEDIUM /WARM
1080 i
FAV
PREFERENCE
SAVE NEW
TV
CBL/SAT CH
VCR
VOL
DVD
Selecting the display format (540p/1080i)
This feature is to convert the input signal 480p to 540p or 1080i.
To select the display format:
Note:
This feature is available only for 480p input.
1. Press MENU, and then press x or • until the PICTURE menu
1080i is always output when the signal other
than 480p is input.
appears.
2. Press y or z to highlight DISPLAY FORMAT.
3. Press x or • to select 540p or 1080i as you desire.
P I CTURE ANTENNA
MODE
MOVIE
FLESH TONE
CableClear DNR
COLOR
OFF
AUTO
TEMPERATURE
DISPLAY FORMAT
MEDIUM
540P/1080 i
PREFERENCE
SAVE NEW
Resetting picture adjustments
The RESET function adjusts the picture qualities to the following
factory settings:
Contrast ................ max (100)
Brightness ............ center (50)
Color ................... center (50)
Tint ....................... center (0)
Sharpness ............. center (50)
To reset the picture adjustments:
Color temperature........... cool
CableClear DNR ........... auto
Mode ........................... sports
1. Press MENU, and then press x or • until the PICTURE menu
appears.
2. Press y or z to highlight RESET.
3. Press x or •. The menu displays “DONE”.
P I CTURE ANTENNA
MODE
SPORTS
CONTRAST
BR IGHTNESS
COLOR
1 0 0
5 0
5 0
0
T I NT
5 0
SHARPNESS
RESET
SAVE NEW
DONE
PREFERENCE
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the video input source
Note:
Press the TV/VIDEO on the remote control or the TV to view a signal
coming from another device connected to your TV, such as a VCR or
video disc player (see illustrations below). You can select ANT 1,
VIDEO 1, VIDEO 2, VIDEO 3, ColorStream HD1, ColorStream
HD2, DVI, or ANT 2 depending on which input jacks are used for
connecting the devices (see “Connecting your TV” on page 7).
• When ColorStream HD 1 or HD 2 is
selected, the video OUT jack does not
output a signal. To receive a video OUT
signal, use a video or S-video IN
connection instead of the ColorStream
connection.
• If you select DVI while the POP picture is
active, the POP window will close.
SOURCE SELECT ION
SOURCE SELECT ION
0 : ANT
1 : V IDEO
2 : V IDEO
V IDEO
1
ANT
1
V IDEO
V IDEO
V IDEO
1
2
3
1
2
3
3 :
Col orSt ream HD1
Col orSt ream HD2
DVI
4 : Col orSt ream HD1
5 : Col orSt ream HD2
:
:
6
7
DVI
ANT
Please note the following regarding
the DVI source selection:
ANT
2
2
:
TV / V I DEO TO SELECT
0
-
7 : TO SELECT
This TV is not intended for connection
to and should not be used with a PC
(personal computer). See “Connecting
a device to the DVI/HDCP input” on
page 13 for details.
Pressing TV/VIDEO on the remote
control displays the current signal
source (press TV/VIDEO again or
0-7 to change)
Pressing TV/VIDEO on the TV changes
the current signal source
Labeling the video input sources
The video label feature allows you to label each input source for your
TV from the following preset list of labels:
TV front panel
–
: Uses the default label name
DEMO
MENU TV/VIDEO
VOLUME
CHANNEL
VCR : Video cassette recorder
DVD : DVD video
DTV : Digital TV set-top box
SAT
CBL
HD
: Satellite box
: Cable box
: DVI/HDCP device (see page 13.)
TV/VIDEO
To label the video input sources:
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
POWER
RECALL
INFO
TV/VIDEO
2. Press y or z to highlight VIDEO LABEL.
TV/VIDEO
Number
1
4
7
2
5
8
3
6
CUSTOM
T I MER
9
CHRTN
00h00m
0h00m
OFF
ON
+10
SLEEP
CC
C2
100
0
ENT
FAVOR I TE CH1
FAVOR I TE CH2
CH LABEL I NG
V I DEO LABEL
BACKGROUND
FAV
PIC
SI
ZE
FAVORITE
MENU
yzx •
MENU
DVDMENU
3. Press x or • to display the VIDEO LABEL menu.
ENTER
4. Press y or z to highlight the video source you want to label.
5. Press x or • to select the desired label for that input source.
N
EXIT
EXIT
FAV
TV
CBL/SAT CH
VCR
VOL
DVD
CUSTOM
V I DEO LABEL
Note:
–
V I DEO1
VCR/ DVD / DTV /SAT /CBL
–
–
–
–
–
V I DEO2
V I DEO3
The HD (high-definition) label is available for
Color Stream HD1
Color Stream HD2
DVI
DVI mode only (see “Selecting the video
input source” above, and “Connecting a
device to the DVI/HDCP input” on page 13).
CUSTOM MENU
6. Finish labeling the other video sources as desired. To return to the
previous menu, press y or z to highlight CUSTOM MENU,
and then press x or •.
7. To exit the menu, press EXIT.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the closed caption feature
The closed caption feature has two options:
• Captions—An on-screen display of the dialogue, narration, and
sound effects of TV programs and videos that are closed
captioned (usually marked as “CC” in TV listings).
• Text—An on-screen display of information not related to the
current program, such as weather or stock data (when provided
by individual stations).
To view captions or text:
POWER
RECALL
INFO
TV/VIDEO
1. Tune the TV to the desired program.
2. Press MENU, and then press x or • to display CUSTOM menu.
3. Press y or z to highlight CC.
1
4
2
5
8
3
6
9
CHRTN
7
+10
100
0
ENT
CUSTOM
T I MER
FAV
PIC
SI
ZE
00h00m
0h00m
ON
SLEEP
FAVORITE
CC C1 / C2 / C3 / C4 / T1 / T2 / T3 / T4 /OFF
FAVOR I TE CH1
FAVOR I TE CH2
MENU
yzx •
MENU
DVDMENU
CH LABEL I NG
V I
LABEL
DEO
BACKGROUND
ENTER
EXIT
FAV
4. Press x or • to highlight the desired closed caption mode, as
TV
CBL/SAT CH
VCR
VOL
follows:
DVD
• To view captions, highlight C1, C2, C3, or C4 (C1 displays
translation of the primary language in your area).
Note: If the program or video you selected is not closed captioned, no
captions will display on the screen.
Note:
A closed caption signal may not display in the
following situations:
• when a videotape has been dubbed
• when the signal reception is weak
• when the signal reception is nonstandard
Giant pandas eat leaves.
• To view text, highlight T1, T2, T3, or T4.
Note: If text is not available in your area, a black rectangle may appear on
your screen. If this happens, turn the Closed Caption feature OFF.
WORLD WEATHER
Temps
Current
Weather
Clear
F
C
LONDON
MOSCOW
PARIS
51
57
53
66
65
11
14
12
19
18
Cloudy
Clear
ROME
Cloudy
Rain
TOKYO
To turn off the Closed Caption feature:
Highlight OFF in step 4.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the ON-timer
To set the ON-timer to turn the TV on automatically:
POWER
RECALL
INFO
TV/VIDEO
1. Press MENU, and then press x or • until the CUSTOM menu
POWER
Number
appears.
1
4
2
5
8
3
6
2. Press y or z to highlight ON.
3. After the number position starts to blink, press the Number
buttons (0-9) to enter the length of time until the TV turns on
automatically.
9
CHRTN
7
+10
100
0
ENT
You can set the ON-timer by 10 minutes, up to 12h00m.
FAV
PIC
SI
ZE
4. Press ENTER to start the timer.
FAVORITE
MENU
yzx •
MENU
DVDMENU
ENTER
N
EXIT
CUSTOM
T I MER
FAV
10h30m
0h00m
OFF
ON
TV
SLEEP
CC
CBL/SAT CH
VCR
VOL
C2
ENTER
SLEEP
FAVOR I TE CH1
FAVOR I TE CH2
CH LABEL I NG
V I DEO LABEL
BACKGROUND
DVD
POP DIRECT CH MUTE
SLEEP
5. Press POWER to turn off the TV.
The TV will turn on automatically after the time you preset.
Setting the sleep timer
Note :
To set the sleep timer to turn the TV off automatically:
When an instant power failure occurs, the
timer setting may be cleared.
1. Press SLEEP to set the length of time until the TV turns off.
To display the amount of time left until the TV
turns on or off automatically, press RECALL.
T I MER
0 h 00m
Every time you press the button, the time display will increase by
10 minutes, up to 3 hours.
0h00m → 0h10m → 0h20m
2h50m → 3h00m → 0h00m
To cancel the sleep timer:
Press SLEEP until it is set to 0h00m.
The timer can also be set using the on-screen menu:
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
2. Press y or z to highlight SLEEP.
3. After the number position starts to blink, press the Number
buttons (0-9) to enter the length of time until the TV turns off
automatically.
4. Press ENTER to start the timer.
CUSTOM
T I MER
ON
SLEEP
CC
00h00m
2h00m
C1
FAVOR I TE CH1
FAVOR I TE CH2
CH LABEL I NG
V I DEO LABEL
BACKGROUND
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
To set the clock:
Note :
1. Press MENU, and then press x or • until the SET UP menu
If the TV’s power source is interrupted (the
power cord is unplugged or a power failure
occurs), the clock must be reset.
appears.
2. Press y or z to highlight CLOCK SET.
3. After the number position starts to blink, press the Number
buttons (0-9) to enter the correct time. The clock operates on a
24-hour cycle.
POWER
RECALL
INFO
TV/VIDEO
4. Press ENTER to start the clock.
RECALL
Number
1
4
2
5
8
3
6
SET UP
9
CHRTN
7
LANGUAGE
ENGL I SH
09 : 2 5
ANT1
+10
CLOCK SET
ANT1 / 2
100
0
ENT
TV / CABLE
CABLE
CH PROGRAM
ADD / ERASE
T I LT CORRECT I ON
FAV
ADD
0
PIC
SI
ZE
QU I C K CONNECT GU I DE
FAVORITE
MENU
yzx •
MENU
DVDMENU
To display the time on-screen:
Press RECALL.
ENTER
EXIT
FAV
ENTER
TV
CBL/SAT CH
VCR
VOL
DVD
Selecting the background of the menu display
You can change the background of the menu display by selecting from
two preset types: shaded and solid (gray).
To select the background:
1. Press MENU, and then press x or • until the CUSTOM menu
appears.
2. Press y or z to highlight BACKGROUND.
3. Press x or • to select either a SHADED or SOLID background.
CUSTOM
T I MER
00h00m
0h00m
C 1
ON
SLEEP
CC
FAVOR I TE CH1
FAVOR I TE CH2
CH LABEL I NG
V I DEO LABEL
BACKGROUND
SHADED / SOL I D
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound
Muting the sound
Press MUTE to temporarily reduce (1/2 MUTE) or turn off (MUTE)
the sound. While the sound is reduced, the screen will display “1/2
MUTE” or “MUTE” in the lower right corner. Every time you press
the button, the mute mode will change in the following order.
POWER
RECALL
INFO
TV/VIDEO
RECALL
1
4
2
5
8
3
6
→ Normal → 1/2 MUTE → MUTE
9
CHRTN
7
When you select “MUTE” mode, the closed caption feature is
automatically activated. To deactivate this feature, deactivate MUTE.
This feature works only when the closed caption mode is set to OFF.
See “Using the closed caption feature” on page 45 for more
information.
+10
100
0
ENT
FAV
PIC
SI
ZE
FAVORITE
MENU
yzx •
MENU
DVDMENU
Selecting stereo/SAP broadcasts
ENTER
N
EXIT
FAV
The multi-channel TV sound (MTS) feature allows you to listen to
high-fidelity stereo sound while watching TV. MTS can also transmit
a second audio program (SAP) containing a second language, music,
or other audio information (when provided by individual stations).
TV
CBL/SAT CH
VCR
VOL
DVD
POP DIRECT CH MUTE
SLEEP
MUTE
When the TV receives a stereo or SAP broadcast, the word STEREO
or SAP appears on-screen every time the TV is turned on, the channel
is changed, or the RECALL button is pressed.
TV front panel
The MTS feature is not available when the TV is in VIDEO mode.
To listen to stereo sound:
DEMO
MENU TV/VIDEO
VOLUME
CHANNEL
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight MTS.
x •zy
MENU
3. Press x or • to highlight STEREO.
AUDI O
Note :
MTS
STEREO / SAP / MONO
BASS
50
50
0
TREBLE
BALANCE
RESET
A second audio program (SAP) can be heard
only on those TV stations that offer it.
For example, a station might broadcast music
as a second audio program. If you have SAP
on, you will see the current program on the
screen but hear music instead of the
program’s normal audio.
You can leave your TV in STEREO mode because it will
automatically output the type of sound being broadcast (stereo or
monaural). The word “STEREO” or “SAP” displays in yellow in
the menu when the TV receives the signal.
If you have SAP on and the station you are
watching is not broadcasting a second audio
program, the station’s normal audio will be
output.
If the stereo sound is noisy, select MONO to reduce the noise.
To listen to SAP (if available):
However, occasionally there is no sound at all
in this instance.
1. Press MENU, and then press x or • until the AUDIO menu
appears.
If this happens, set the MTS feature to
STEREO mode.
2. Press y or z to highlight MTS.
3. Press x or • to highlight SAP. You will hear the station’s second
audio program (if available) from the speakers, while viewing the
original program’s picture (see note at right).
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the WOW™ surround sound feature
Note:
WOW is the latest audio enhancement technology combined with
SRS 3D and TruBass of SRS Labs individual technologies. The feature
uses stereo signals from a TV broadcast or video input.
If the broadcast is monaural, the SRS 3D
effect does not work.
To adjust the WOW feature:
1. Select STEREO mode (See “Selecting stereo/SAP broadcasts” on
page 48).
2. Press MENU, and then press x or • until the THEATER menu
appears.
3. Press y or z to highlight the desired WOW feature you want to
adjust, then press x or • to adjust the item.
POWER
RECALL
INFO
TV/VIDEO
THEATER
WOW
SRS 3D
ON OFF
/
1
4
2
5
8
3
6
FOCUS
T r u B a s s
IMAGE SHAPE
AUTO ASPECT
C I NEMA MODE
OFF
ON HIGH
OFF
VIDEO
9
CHRTN
7
+10
100
0
ENT
• SRS 3D — To turn on or off the surround sound effect.
• FOCUS — To turn on or off the vocal enphasis effect.
FAV
PIC
SI
ZE
ORITE
FAV
MENU
yzx •
MENU
DVDMENU
• TruBass — To select your desired bass expansion level (HIGH,
LOW or OFF).
ENTER
N
EXIT
FAV
Adjusting the sound quality
You can change the quality of your TV’s sound by adjusting the bass,
treble, and balance.
TV
CBL/SAT CH
VCR
VOL
DVD
To adjust the sound quality:
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight the item you want to adjust.
AUDI O
MTS
STEREO / SAP / MONO
BASS
50
50
0
TREBLE
BALANCE
RESET
3. Press x or • to adjust the level.
• x makes the sound quality weaker or decreases the balance in the
right channel, depending on the item selected.
• • makes the sound quality stronger or decreases the balance in
the left channel, depending on the item selected.
________
SRS WOW, SRS and
symbol are trademarks of SRS Labs, Inc.
SRS WOW technology is incorporated under license from SRS Labs, Inc.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting your audio adjustments
The RESET function returns the audio adjustments to the following
factory settings:
POWER
RECALL
INFO
TV/VIDEO
Bass.................. center (50)
Treble............... center (50)
Balance ............ center (0)
1
4
2
5
8
3
6
9
CHRTN
7
To reset the audio adjustments:
+10
100
0
ENT
1. Press MENU, and then press x or • until the AUDIO menu
FAV
appears.
PIC
SI
ZE
FAVORITE
2. Press y or z to highlight RESET.
MENU
yzx •
MENU
DVDMENU
3. Press x or •. The menu displays “DONE”.
ENTER
EXIT
FAV
TV
CBL/SAT CH
VCR
VOL
AUDI O
DVD
MTS
STEREO
BASS
50
50
0
TREBLE
BALANCE
RESET
DONE
Note:
While in the SBS OFF mode, if the SBS level
is adjusted, the SBS is automatically set ON.
Using the sub-bass system (SBS)
The sub-bass system allows you to enhance bass performance, even
when the sound volume is low.
To turn on the SBS:
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight SBS.
3. Press x or • to highlight ON.
AUDI O
SBS
ON/ OFF
7 0
SBS LEVEL
SPEAKERS
AUDI O OUT
ON
MA I N
STABLE SOUND OFF
To adjust the SBS level:
4. Press y or z to highlight SBS LEVEL.
5. Press x or • to adjust the SBS level.
AUDI O
SBS
ON
SBS LEVEL
SPEAKERS
AUDI O OUT
7 0
ON
MA I N
STABLE SOUND OFF
To turn off the SBS:
Highlight OFF in step 3 above.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning off the built-in speakers
Note:
Use this feature to turn the TV speakers off when you connect an
audio system (See “Connecting an audio system” on page 14).
• Make sure the volume control of your
audio amplifier is set to a moderate
listening level.
To turn off the built-in speakers:
1. Press MENU, then press x or • until AUDIO menu appears.
2. Press y or z to highlight SPEAKERS.
3. Press x or • to highlight OFF.
• When the POP is not on the screen, the
sound of the main program is output, even
if the POP sound is selected.
POWER
RECALL
INFO
TV/VIDEO
AUDI O
SBS
ON
SBS LEVEL
SPEAKERS
AUDI O OUT
7 0
ON/ OFF
MA I N
1
4
2
5
8
3
6
STABLE SOUND OFF
9
CHRTN
7
+10
To turn on the built-in speakers:
Highlight ON in step 3 above.
100
0
ENT
FAV
PIC
SIZE
FAVORITE
Selecting the Audio OUT sound
MENU
yzx •
MENU
DVDMENU
This feature allows you to select the sound source (MAIN or POP)
that is output from the Audio OUT jacks (See “Connecting two
VCRs” on page 12).
ENTER
EXIT
FAV
TV
CBL/SAT CH
VCR
VOL
This is useful when amplifying or recording the POP sound with
external equipment while hearing the sound of the main picture
through the built-in speakers.
DVD
To select the Audio OUT sound:
1. Press MENU, and then press x or • until the AUDIO menu
appears.
2. Press y or z to highlight AUDIO OUT.
3. Press x or • to select MAIN or POP.
AUDI O
SBS
ON
SBS LEVEL
SPEAKERS
AUDI O OUT
7 0
ON
MAIN / POP
STABLE SOUND OFF
• MAIN: Outputs the sound of the main program.
• POP : Outputs the sound of the POP program.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the StableSound® feature
When the signal source is changed, the StableSound® feature limits
the highest volume level to prevent extreme changes in volume (for
example, to prevent the sudden increase in volume that often happens
when a TV program switches to a commercial).
POWER
RECALL
INFO
TV/VIDEO
RECALL
1
4
2
5
8
3
6
To turn on the StableSound® feature:
1. Press MENU, and then press x or • until the AUDIO menu
9
CHRTN
7
appears.
+10
100
0
ENT
2. Press y or z to highlight STABLE SOUND.
FAV
PIC
SI
ZE
3. Press x or • to select ON.
FAVORITE
MENU
yzx •
MENU
DVDMENU
ENTER
AUDI O
EXIT
SBS
ON
7 0
FAV
SBS LEVEL
SPEAKERS
AUDI O OUT
ON
POP
TV
STABLE SOUND ON /OFF
CBL/SAT CH
VCR
VOL
DVD
To turn off the StableSound feature:
Highlight OFF in step 3 above.
Displaying on-screen information
Press RECALL to display the following information on-screen:
• Antenna mode (when in TV mode)
• Channel number or VIDEO mode selected
• Time (if set)
• Remaining time of ON/SLEEP timers (if set)
• Channel label (if set)
• Stereo or SAP audio status
• V-CHIP rating status
• Image shape
STEREO
SAP
TV – PG
L
V
TV – PG
L
V
ON T I MER
11h34m
1h23m
ON T I MER
11h34m
1h23m
SLEEP T I MER
SLEEP T I MER
ANT
1
NORMAL
ABCD
COMPRESS I ON
CLOCK
DVD
HD1
CLOCK
9
: 2 5
CABLE
6
9 : 2 5
ColorStream
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing the demo mode
The demo mode automatically demonstrates several of your TV’s
features. This function is provided for demonstration purposes only.
To start the demo:
Press DEMO on the TV front panel.
To stop the demo:
Press DEMO, RECALL, EXIT, or POWER.
Understanding the auto power off feature
The TV will automatically turn itself off after approximately 15
minutes if it is tuned to a vacant channel or a station that completes
its broadcast for the day. This feature does not work in VIDEO mode.
Understanding the last mode memory feature
If the power is cut off while you are viewing the TV, the Last Mode
Memory feature turns the TV on automatically when the power is
resupplied.
If the power is going to be off for a long time and you are going to be
away from your TV, unplug the power cord to prevent the TV from
turning on in your absence.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
Television System
NTSC standard
Dimensions
32HF73: Width
Height 26-3/8 inches (670 mm)
34-1/2 inches (875 mm)
Channel Coverage
VHF: 2 through 13
UHF: 14 through 69
Depth
36HF73: Width
22-5/8 inches (575 mm)
38-1/4 inches (972 mm)
Cable TV: Mid band (A-8 through A-1, A through I)
Super band (J through W)
Height 29-5/8 inches (753 mm)
Depth 24-1/4 inches (615 mm)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 125)
Mass
32HF73: 151.0 lbs (67 kg)
36HF73: 203.0 lbs (97 kg)
Power Source
120 V AC, 60 Hz
Supplied Accessories
Remote Control with 2 size “AA” alkaline batteries
Power Consumption
32HF73: 172 W (average)
36HF73: 174 W (average)
Optional Stand
32HF73: ST3263
Audio Power
10 W + 10 W
36HF73: ST3663
Design and specifications are subject to change without notice.
Speaker Type
Two 2-3/8 inches (60 × 120 mm)
Video/Audio Terminals
S-VIDEO INPUT
Y : 1 V(p-p), 75 ohm, negative sync.
C : 0.286 V(p-p) (burst signal), 75 ohm
VIDEO/AUDIO INPUT
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms) (30% modulation equivalent,
47 k ohm)
ColorStream® (component video) INPUT
Y : 1V(p-p), 75 ohm
PR: 0.7 V(p-p), 75 ohm
PB: 0.7 V(p-p), 75 ohm
AUDIO: 150 mV(rms), 47 k ohm
VIDEO/AUDIO OUTPUT
VIDEO: 1 V(p-p), 75 ohm, negative sync.
AUDIO: 150 mV(rms) (30% modulation equivalent,
4.7 k ohm)
VARIABLE AUDIO OUTPUT
0–300 mV(rms) (30% modulation equivalent, 4.7 k ohm)
AUDIO CENTER CHANNEL INPUT
300 mV(rms) (30% modulation equivalent, 10 k ohm)
DVI/HDCP INPUT
HDCP compliant
E-EDID* 1.3 compliant
DVI-D uncompressed, high-speed, digital single-link
connection
Suggested scan rates: 1080i, 480p, 480i
_________
* E-EDID = Enhanced-Extended Display Identification
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Before calling a service technician, please check the following table for a possible cause of the problem and
some solutions.
Problem
Solution
TV will not turn on
• Make sure the power cord is plugged in, then press POWER.
• The remote control batteries may be dead. Replace the batteries.
No picture, no sound
No sound, picture OK
• Check the antenna/cable connections.
• The sound may be muted. Press VOLUME.
• The station may have broadcast difficulties. Try another channel.
• Check that the SPEAKERS function in AUDIO menu is set properly.
• Check that the AUDIO CENTER CHANNEL switch is set
properly.
Poor picture, sound OK
• Check the antenna connections.
• The station may have broadcast difficulties. Try another channel.
• Adjust the PICTURE menu.
Poor reception of broadcast channels
• The station may have broadcast difficulties. Try another channel.
• Check the antenna connections.
• If you are using a VCR, make sure the TV/VCR button is set
correctly.
Cannot receive above channel 13
• Make sure the TV/CABLE switch is set to the mode that
corresponds with the signal source type (cable company or outside
antenna).
Black box appears on the screen
Unable to select a certain channel
Multiple images
• The closed caption feature may be set to one of the Text modes (T1,
T2, T3, or T4). Turn closed captioning OFF.
• The channel may be locked out with the CH LOCK feature, or
erased with the ADD/ERASE feature.
• The station may have broadcast difficulties. Try another channel.
• Antenna reception may be poor. Use a highly directional outdoor
antenna.
Poor color or no color
• The station may have broadcast difficulties. Try another channel.
• Adjust the TINT and/or COLOR in the PICTURE menu.
No stereo or SAP sound from a
known MTS broadcast
• Make sure the MTS feature is set properly.
The front panel buttons do not operate • Check the FRONT PANEL LOCK feature.
The remote control does not operate
• Check whether the appropriate device mode is selected.
• Remove all obstructions between the remote control and the remote
control sensor in the TV.
• The remote control batteries may be dead. Replace the batteries.
Cannot access signal input sources
(Video1, Video2, Video3,
• Check the VIDEO LOCK feature.
ColorStream HD1/HD2, DVI/HDCP)
and/or Channels 3 and 4.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited United States Warranty
for 27'' FST PURE® and All Larger Television Models
Toshiba America Consumer Products, Inc. (“TACP”) and Toshiba
systems are not covered by these warranties. Reception
problems caused by inadequate antenna systems are your
responsibility.
Hawaii, Inc. (“THI”) make the following limited warranties to
original consumers in the United States. THESE LIMITED
WARRANTIES EXTEND TO THE ORIGINAL CONSUMER
PURCHASER OR ANY PERSON RECEIVING THIS
TELEVISION AS A GIFT FROM THE ORIGINAL CONSUMER
PURCHASER AND TO NO OTHER PURCHASER OR
TRANSFEREE.
(5) Warranties extend only to defects in materials or
workmanship as limited above and do not extend to any
television or parts that have been lost or discarded by you or
to damage to television or parts caused by misuse, accident,
Acts of God (such as lightning or fluctuations in electric
power), improper installation, improper maintenance, or use
in violation of instructions furnished by TACP/THI; or to units
that have been modified or had the serial number removed,
altered, defaced, or rendered illegible.
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN
CANADA ARE NOT COVERED BY THESE WARRANTIES.
PRODUCTS PURCHASED IN CANADA AND USED IN THE
U.S.A. ARE NOT COVERED BY THESE WARRANTIES.
How to Obtain Warranty Services
Limited One (1) Year Warranty on Parts and Labor*
If, after following all of the operating instructions in this manual
and checking the “Troubleshooting” section, you find that service
is needed:
TACP/THI warrant this television and its parts against defects in
materials or workmanship for a period of one (1) year after the
date of original retail purchase. DURING THIS PERIOD, TACP/
THI WILL, AT TACP/THI’S OPTION, REPAIR OR REPLACE A
DEFECTIVE PART WITH A NEW OR REFURBISHED PART
WITHOUT CHARGE TO YOU FOR PARTS OR LABOR. TACP/
THI Authorized Service Station personnel will come to your home
when warranty service is required. Depending on the type of
repair required, either the service will be performed in your home
or the set will be taken to the TACP/THI Authorized Service
Station for repair and returned to your home at no cost to you.
(1) To find the nearest TACP/THI Authorized Service Station:
For televisions purchased in the United States, except
or call toll free 1-800-631-3811.
For televisions purchased in Hawaii, contact Toshiba Hawaii,
Inc., 327 Kamakee Street, Honolulu, HI 96814, (808) 591-
9281.
(2) Present your bill of sale or other proof of purchase to the
Authorized Service Station. Authorized TACP/THI Service
Station personnel will come to your home when warranty
service is required. Depending on the type of repair required,
either the service will be performed in your home or the set
will be taken to the Authorized Service Station for repair and
returned to your home at no cost to you.
Limited Two (2) Year Warranty on Picture Tube*
TACP/THI further warrant the picture tube in this television
against defects in materials or workmanship for a period of two
(2) years after the date of original retail purchase. DURING
THIS PERIOD, TACP/THI WILL, AT TACP/THI’S OPTION,
REPAIR OR REPLACE A DEFECTIVE PICTURE TUBE WITH A
NEW OR REFURBISHED PICTURE TUBE WITHOUT
CHARGE TO YOU, EXCEPT THAT, IF A DEFECTIVE PICTURE
TUBE IS REPAIRED OR REPLACED AFTER ONE (1) YEAR
FROM THE DATE OF THE ORIGINAL RETAIL PURCHASE,
YOU PAY LABOR CHARGES INVOLVED IN THE REPAIR OR
REPLACEMENT.
For additional information, visit TACP’s web site:
.
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE
OF THE U.S.A., INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE EXPRESSLY LIMITED TO THE DURATION
OF THE LIMITED WARRANTIES SET FORTH ABOVE. WITH
THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE
LAW OF ANY STATE OF THE U.S.A. AS HEREBY LIMITED,
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU
OF ALL OTHER WARRANTIES, GUARANTEES,
Rental Units
The warranty for rental units begins with the date of first rental or
thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
AGREEMENTS, AND SIMILAR OBLIGATIONS OF TACP OR
THI WITH RESPECT TO THE REPAIR OR REPLACEMENT OF
ANY PARTS. IN NO EVENT SHALL TACP OR THI BE LIABLE
FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES.
*Commercial Units
Televisions sold and used for commercial purposes have a limited
ninety (90) day warranty for all parts, labor, and picture tubes.
Owner’s Manual and Product Registration Card
No person, agent, distributor, dealer, or company is authorized to
change, modify, or extend the terms of these warranties in any
manner whatsoever. The time within which action must be
commenced to enforce any obligation of TACP or THI arising
under this warranty or under any law of the United States or of
any state thereof is hereby limited to 90 days from the date you
discover, or should have discovered, the defect. This limitation
does not apply to implied warranties arising under the law of any
state of the U.S.A.
Read this owner’s manual thoroughly before operating this
television. Complete and mail the enclosed product registration
card within ten days after you, or the person who has given you
this product as a gift, purchased this television. Returning the
product registration card will enable TACP/THI to provide you
with better customer service and improved product support.
Failure to return the product registration card will not affect your
rights under this warranty.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY
VARY FROM STATE TO STATE IN THE U.S.A. SOME STATES
OF THE U.S.A. DO NOT ALLOW LIMITATIONS ON THE
DURATION OF AN IMPLIED WARRANTY, LIMITATIONS ON
THE TIME WITHIN WHICH AN ACTION MAY BE BROUGHT,
OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES; THEREFORE, THE ABOVE
LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU
UNDER SUCH CIRCUMSTANCES.
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this television must be made by an
Authorized TACP/THI Service Station.
(3) The warranties from TACP and THI are effective only if the
television is purchased and operated in the U.S.A. or Puerto Rico.
(4) Labor service charges for set installation, setup, adjustment
of customer controls, and installation or repair of antenna
FST PURE® is a registered trademark of Toshiba America Consumer Products, Inc.
REV. MAR02
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Canada Warranty
for 27'' FST PURE® and All Larger Television Models
Toshiba of Canada Limited (“TCL”) makes the following limited
warranties to original consumers in Canada.
(5) Warranties extend only to defects in materials or
workmanship as limited above and do not extend to any
television or parts that have been lost or discarded by you or
to damage to television or parts caused by misuse, accident,
Acts of God (such as lightning or fluctuations in electric
power), improper installation, improper maintenance, or use
in violation of instructions furnished by TCL; or to units that
have been modified or had the serial number removed,
altered, defaced, or rendered illegible.
THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL
CONSUMER PURCHASER OR ANY PERSON RECEIVING
THIS TELEVISION AS A GIFT FROM THE ORIGINAL
CONSUMER PURCHASER AND TO NO OTHER
PURCHASER OR TRANSFEREE.
PRODUCTS PURCHASED IN THE U.S.A. AND USED IN
CANADA ARE NOT COVERED BY THESE WARRANTIES.
How to Obtain Warranty Services
If, after following all of the operating instructions in this manual
and checking the “Troubleshooting” section, you find that service
is needed:
PRODUCTS PURCHASED IN CANADA AND USED IN THE
U.S.A. ARE NOT COVERED BY THESE WARRANTIES.
Limited One (1) Year Warranty on Parts and Labor*
(1) To find the nearest TCL Authorized Service Depot, visit TCL’s
TCL warrants this television and its parts against defects in
materials or workmanship for a period of one (1) year after the
date of original retail purchase. DURING THIS PERIOD, TCL
WILL, AT TCL’S OPTION, REPAIR OR REPLACE A DEFECTIVE
PART WITH A NEW OR REFURBISHED PART WITHOUT
CHARGE TO YOU FOR PARTS OR LABOR. TCL Authorized
Service Depot personnel will come to your home when warranty
service is required. Depending on the type of repair required,
either the service will be performed in your home or the set will
be taken to the TCL Authorized Service Depot for repair and
returned to your home at no cost to you. IN-HOME SERVICE
ONLY APPLIES WITHIN 100 KILOMETERS OF AN
(2) Present your bill of sale or other proof of purchase to the
Authorized Service Depot. Authorized TCL Service Depot
personnel will come to your home when warranty service is
required. Depending on the type of repair required, either
the service will be performed in your home or the set will be
taken to the Authorized Service Depot for repair and
returned to your home at no cost to you. IN-HOME
SERVICE ONLY APPLIES WITHIN 100 KILOMETERS OF
AN AUTHORIZED TCL SERVICE DEPOT.
For additional information, visit TCL’s web site:
AUTHORIZED TCL SERVICE DEPOT.
Limited Two (2) Year Warranty on Picture Tube*
ALL WARRANTIES IMPLIED BY THE LAW OF ANY
PROVINCE OF CANADA, INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE, ARE EXPRESSLY LIMITED TO
THE DURATION OF THE LIMITED WARRANTIES SET FORTH
ABOVE. WITH THE EXCEPTION OF ANY WARRANTIES
IMPLIED BY THE LAW OF ANY PROVINCE OF CANADA AS
HEREBY LIMITED, THE FOREGOING WARRANTY IS
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES,
GUARANTEES, AGREEMENTS, AND SIMILAR
OBLIGATIONS OF TCL WITH RESPECT TO THE REPAIR OR
REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TCL
BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL
DAMAGES.
TCL further warrants the picture tube in this television against
defects in materials or workmanship for a period of two (2) years
after the date of original retail purchase. DURING THIS
PERIOD, TCL WILL, AT TCL’S OPTION, REPAIR OR REPLACE
A DEFECTIVE PICTURE TUBE WITH A NEW OR
REFURBISHED PICTURE TUBE WITHOUT CHARGE TO YOU,
EXCEPT THAT, IF A DEFECTIVE PICTURE TUBE IS REPAIRED
OR REPLACED AFTER ONE (1) YEAR FROM THE DATE OF
THE ORIGINAL RETAIL PURCHASE, YOU PAY LABOR
CHARGES INVOLVED IN THE REPAIR OR REPLACEMENT.
Rental Units
The warranty for rental units begins with the date of first rental or
thirty (30) days from the date of shipment to the rental firm,
whichever comes first.
No person, agent, distributor, dealer, or company is authorized to
change, modify, or extend the terms of these warranties in any
manner whatsoever. The time within which action must be
commenced to enforce any obligation of TCL arising under this
warranty or under any law of Canada or of any province thereof,
is hereby limited to 90 days from the date you discover, or should
have discovered, the defect. This limitation does not apply to
implied warranties arising under the law of any province of
Canada.
*Commercial Units
Televisions sold and used for commercial purposes have a limited
ninety (90) day warranty for all parts, labor, and picture tubes.
Owner’s Manual
Read this owner’s manual thoroughly before operating this
television.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH MAY
VARY FROM PROVINCE TO PROVINCE IN CANADA. SOME
PROVINCES OF CANADA DO NOT ALLOW LIMITATIONS
ON THE DURATION OF AN IMPLIED WARRANTY,
LIMITATIONS ON THE TIME WITHIN WHICH AN ACTION
MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES;
THEREFORE, THE ABOVE LIMITATIONS OR EXCLUSIONS
MAY NOT APPLY TO YOU UNDER SUCH
Your Responsibility
THE ABOVE WARRANTIES ARE SUBJECT TO THE
FOLLOWING CONDITIONS:
(1) You must provide your bill of sale or other proof of purchase.
(2) All warranty servicing of this television must be made by an
Authorized TCL Service Depot.
(3) The warranties from TCL are effective only if the television is
purchased in Canada from an authorized TCL dealer and
operated in Canada.
CIRCUMSTANCES.
(4) Labor service charges for set installation, setup, adjustment
of customer controls, and installation or repair of antenna
systems are not covered by these warranties. Reception
problems caused by inadequate antenna systems are your
responsibility.
FST PURE® is a registered trademark of Toshiba America Consumer Products, Inc.
REV. MAR02
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
O P
A
ON-timer .................................................................................46
Picture adjustments
A/V cables (standard) ......................................................... 7
A/V receiver connection ...................................................14
ANT 1/2 ...................................................................................21
Antenna cables (coaxial) ................................................... 7
AUDIO OUT sound, selecting ....................................... 51
Audio system connection.................................................14
Auto aspect........................................................................... 30
Auto favorite ..........................................................................34
Auto power off......................................................................53
COLOR TEMPERATURE ..............................................43
FLESH TONE ....................................................................42
Picture mode ....................................................................41
Picture quality ..................................................................41
Picture-out-picture (POP)
CH SCAN button ............................................................33
FREEZE button ................................................................32
POP CH zy buttons .................................................... 31
POP DIRECT CH button ...............................................31
SOURCE button ............................................................. 31
SPLIT button .................................................................... 31
SWAP button ....................................................................32
POP (also see “Picture-out-picture”) ..........................31
B
BACKGROUND selection ................................................47
Back of the TV ........................................................................ 6
C
CableClear™ DNR ...............................................................42
Cable converter box connection ..................................... 8
Camcorder connection......................................................12
CH yz buttons ....................................................................24
CH LABELING ......................................................................27
CH LOCK.................................................................................38
CH RTN button .....................................................................25
Channel Number buttons ................................................24
Channel programming
Q R
Quick connect guide..........................................................23
RECALL button ....................................................................52
Remote control
Battery installation .........................................................15
Learning about the buttons ........................................19
Programming ....................................................................16
RESET .............................................................................. 43, 50
ADD/ERASE .....................................................................22
Automatic programming .............................................22
TV/CABLE selection ......................................................22
Cinema mode........................................................................30
Clock, setting ........................................................................47
Closed caption......................................................................45
Color temperature ...............................................................43
ColorStream (component) cables................................... 7
S
SAP sound............................................................................. 48
Satellite receiver connection............................................. 9
Set-top box ............................................................................11
Size of Double-Window, adjusting ...............................32
Sleep timer .............................................................................46
Sound quality adjustments ..............................................49
SPEAKERS on/off ...............................................................51
Specifications........................................................................54
SpeedSurf mode ..................................................................24
SRS 3D surround.................................................................49
StableSound® ........................................................................52
Stereo sound .........................................................................48
Sub-bass system (SBS) ....................................................50
SurfLock™...............................................................................25
S-video cables ........................................................................ 7
D
DEMO button........................................................................53
Display format.......................................................................43
Double-window (“POP”) feature ...................................31
DTV receiver connection ..................................................11
DVD connection..............................................................9, 10
DVI cable .................................................................................. 7
DVI/HDCP connection ......................................................13
F G
T
FAV yz buttons ..................................................................26
FAVORITE button .................................................................34
Favorite channels, programming...................................25
FOCUS feature .................................................................... 49
Front of the TV........................................................................ 6
Front panel lock .................................................................. 40
Game timer ........................................................................... 40
Tilt correction ........................................................................24
Troubleshooting ...................................................................55
TruBass feature ....................................................................49
TV/VIDEO button......................................................... 25, 44
V
V-CHI P
BLOCKING OPTION ......................................................37
ENABLE BLOCKING .................................................... 36
MPAA RATING ................................................................37
NEW PIN CODE ............................................................. 40
TV RATING ........................................................................36
Unlocking programs temporarily..............................38
VCR connection ..................................................................... 7
VIDEO LABEL ...................................................................... 44
VIDEO LOCK .........................................................................39
I
Image shape selection ......................................................28
L M
Labeling channels ...............................................................27
Labeling video inputs ........................................................44
Language selection ............................................................21
Last mode memory .............................................................53
Locking channels ................................................................38
Locking video inputs ......................................................... 39
Locks menu ...........................................................................35
Menu system.........................................................................20
MTS feature ...........................................................................48
MUTE button .........................................................................48
W
Warranty.......................................................................... 56, 57
WOW surround sound feature .......................................49
58
Download from Www.Somanuals.com. All Manuals Search And Download.
HEAD OFFICE: 82 TOTOWA ROAD, WAYNE, NJ 07470, U.S.A.
NATIONAL SERVICE DIVISION:1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A.
HEAD OFFICE: 327 KAMAKEE STREET, HONOLULU, HI 96814, U.S.A. – TEL: (808) 591-9281
HEAD OFFICE: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA – TEL: (905) 470-5400
SERVICE CENTERS:
TORONTO:
191 McNABB STREET, MARKHAM, ONTARIO L3R 8H2, CANADA – TEL: (905) 470- 5400
MONTREAL: 1643 NORTH SERVICE RD., TRANS-CANADA HIGHWAY, DORVAL QUEBEC, H9P 1J1, CANADA – TEL: (514) 856-4100
VANCOUVER: 22171 FRASERWOOD WAY, RICHMOND, B.C., V6W 1J5, CANADA – TEL: (604) 303-2500
MANUFACTURED BY
ColorStream and StableSound are registered trademarks of Toshiba America Consumer Products, Inc.
CableClear and SurfLock are trademarks of Toshiba America Consumer Products, Inc.
PRINTED IN USA
(03-06)
Download from Www.Somanuals.com. All Manuals Search And Download.
|