Color Television
32AX60/36AX60
Owner’s Manual
© 2000 TOSHIBA CORPORATION
All Rights Reserved
Download from Www.Somanuals.com. All Manuals Search And Download.
A polarized alternating current line plug — having one blade wider
than the other. This plug will fit into the power outlet only one way. If
you are unable to insert the plug into the outlet, try reversing the plug.
A product and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
surfaces may cause the product
and cart combination to overturn.
Un enchufe de línea de corriente alterna polarizado — posee una
cuchilla más ancha que la otra. Este enchufe entrará en la toma de la
red de una sola forma. Si no puede inertar el enchufe en la toma de la
red, trate de invertirlo.
La combinación de un producto y
un carrito deberá moverse con
cuidado. Las paradas repentinas,
la fuerza excesiva, y las superficies
desiguales pondrían hacer que
volcase la combinación del carrito
y del producto.
Alternate Warnings — A three-wire grounding-type plug — a plug
having a third (grounding) pin. This plug will only fit into grounding-
type power outlet.
Advertencias alternativas — Enchufe de tippo puesta a tierra de tres
conductores — enchufe que posee un tercer terminal (de puesta a
tierra). Este enchufe solamente encajará en una toma de la red de tipo
puesta a tierra.
USE / UTILIZACIÓN
Overloading — Do not overload wall outlets, extension cords or
convenience receptacles beyond their capacity, since this can result in
fire or electric shock.
Water and Moisture — Do not use the TV set near water — for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
Sobrecarga — No sobrecargue las tomas de la red, los cables
prolongadores, ni los adaptadores para múltiples tomas, ya que esto
supondría el riesgo de incendios o de descargas eléctricas.
Agua y humedad — No utilice el televisor cerca del agua — por
ejemplo, cerca de una bañera, un lavabo, un fregadero, una lavadora, en
un sótano húmedo, cerca de una piscina, ni lugares por el estilo.
During lightning storms, or when the TV set will be left unattended
and unused for a long period of time, unplug the power cord from the
wall outlet and disconnect the antenna or cable system. This will
prevent damage to the TV set due to lightning and power-line surges.
Ventilation — The slots and openings in the cabinet and in the back or
bottom are provided for necessary ventilation. Never block or cover
these slots and openings to ensure reliable operation of the TV set and
to protect it from overheating.
Durante tormentas eléctricas, o cuando no vaya a utilizar el televisor
durante mucho tiempo, desenchufe el cable de alimentación de la toma
de la red y desconecte la antena o el sistema de cablevisión. Esto evitará
que se dañe el televisor debido a rayos y a sobretensiones repentinas en
la red.
Ventilación — Las ranuras y aberturas de la caja y de la parte posterior
o de la base son para proporcionar la ventilación necesaria. Para
asegurar la operación fiable del televisor para protegerlo contra el
recalentamiento. No bloquee ni cubra nunca estas ranuras y aberturas.
a. Never cover the slots and openings with a cloth or other materials.
a. No cubra nunca las ranuras ni las aberturas con paños ni otros
materiales.
b. Never block the slots and openings by placing the TV set on a bed,
sofa, rug or other similar surface.
Object and Liquid Entry — Never push objects of any kind into the
TV set through the cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the TV set.
Entrada de objetos y líquidos — No introduzca nunca objetos de
ningún tipo en este televisor a través de las aberturas, ya que podrían
tocar puntos de tensión peligrosa o cortocircuitar piezas, lo que podría
resultar en incendio o descarga eléctrica. No vierta nunca liquidos de
ningún tipo sobre este televisor.
b. No bloquee nunca las ranuras ni las aberturas colocando el televisor
sobre una cama, un sofá, una alfombra, ni demás superficies similares.
c. Never place the TV set in a confined space such as a bookcase, built-
in cabinet, or any other place of poor ventilation.
c. No coloque nunca el televisor en un espacio cubierto, como una
librería o un estante empotrados, nien un lugar de mala ventilación.
Cleaning — Unplug the TV set from the wall outlet before cleaning or
polishing it. Do not use liquid cleaners or aerosol cleaners. Use a cloth
lightly dampened with water for cleaning the exterior of the TV set.
Heat — Do not place the TV set near or over a radiator or heat
register, or where it is exposed to direct sunlight.
Limpieza — Desenchufe el televisor de la toma de la red antes de
limpiarlo. No utilice limpiadores líquidos ni aerosoles. Para limpiar el
exterior del televisor, utilice un paño ligeramente humedecido en agua.
Calor — No coloque el televisor cerca ni sobre un radiador ni un
registro de calor, ni expuesto a la luz solar directa.
Power-Cord Protection — Do not allow anything to rest on or roll
over the power cord, and do not place the TV set where the power cord
is subject to wear or abuse.
Attachments — Never add accessories that have not been specifically
designed for the TV set. Never remodel the TV set by yourself as this
can result in a fire hazard or electric shock.
Protección del cable de alimentación — No coloque ni pase sobre el
cable de alimentación, ni coloque el telivisor donde su cable de
alimentación pueda sufir cualquier tipo de daños.
Aditamentos — No utilice aditamentos no recomendados por el
fabricante del televisor, ya que podrían suponer un peligro. No
remodele nunca el televisor usted mismo, ya que esto podría causar el
riesgo de incendios o descargas eléctricas.
Accessories — Do not place the TV set on an unstable cart, stand,
tripod, bracket, or table. The TV set may fall, causing serious injury to
a child or adult, and serious damage to the TV set. Use only with a cart,
stand, tripod, bracket, or table recommended by the manufacturer, or
sold with the TV set, and should use a mounting accessory recom-
mended by the manufacturer.
If a snapping or popping sound from a TV set is heard continuously or
frequently while the TV set is operated, unplug the TV set and consult
your dealer or service technician. It is normal for some TV sets to make
occasional snapping or popping sounds, particularly when being turned
on or off.
Accesorios — No coloque el televisor sobre un carrito, una base, un
trípode, un soporte ni una mesea inestable. El televisor podría caerse,
causando serios daños a niños o adultos, o al propio televisor. Utilice
solamente el carrito, la base, el trípode, el soporte, o la mesa que
recomiende el fabricante, o que se venda con el televisor, y utilice un
accesorio de montaje recomendado por el fabricante.
Si se oye un sonido seco de un televisor continuo o frecuente mientras
el televisor esté funcionando, desenchúfelo y consulte a su proveedor o
a un técnico de servicio. Es normal que algunos televisores produzcan
sonidos secos, particularmente cuando conecte o desconecte su
alimentación.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE / SERVICIO DE REPARACIÓN
When the TV set reaches the end of its useful life, improper disposal
could result in a picture tube implosion. Ask a qualified service
technician to dispose of the TV set.
Damage Requiring Service — Unplug the TV set from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
Cuando el televisor llegue al final de su vida útil, si se deshace de él de
forma inapropiada, el tubo de imagen puede explotar. Cuando desee
deshacerse de un televisor, solicite este servicio a un técnico de
reparación especializado.
Daños que requieren el servicio de reparación — En los casos
siguientes, desenchufe el televisor de la toma de la red y solicite los
servicios de personal de reparación especializado:
a. When the power cord or plug is damaged or frayed.
a. Cuando se haya dañado el cable de alimentación o el enchufe.
b. When liquid has been spilled into the TV set.
ANTENNA / ANTENA
Outdoor Antenna Grounding — If an outdoor antenna is installed,
follow the precautions below.
b. Cuando se haya vertido líquido dentro del televisor.
c. When the TV set has been exposed to rain or water.
c. Cuando el televisor haya estado expuesto a la lluvia o al agua.
An outdoor antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or where
it can come in contact with such power lines or circuits.
WHEN INSTALLING AN OUTDOOR ANTENNA SYSTEM,
EXTREME CARE SHOULD BE TAKEN TO KEEP FROM
CONTACTING SUCH POWER LINES OR CIRCUITS AS
CONTACT WITH THEM IS ALMOST INVARIABLY FATAL.
d. When the TV set has been subject to excessive shock by being
dropped, or the cabinet has been damaged.
d. Cuando el televisor haya estado expuesto a golpes excesivos o haya
caído, o su caja se haya dañado.
Be sure the antenna system is grounded so as to provide some
protection against voltage surges and built-up static charges. Section
810 of the National Electrical Code in the USA and Section 54 of the
Canadian Electrical Code in Canada provides information with respect
to proper grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.
e. When the TV set does not operate normally even though you follow
the operating instructions. Adjust only those controls that are
specified in the operating instructions. Improper adjustment of
other controls may result in damage and will often require extensive
work by a qualified technician to restore the TV set to normal
operation.
When the TV set exhibits a distinct change in performance. This
indicates a need for service.
Puesta a tierra de la antena exterior — Cuando instale una antena
exterior, tenga en cuenta las precauciones siguientes.
e. Cuando el televisor no funcione normalmente incluso al seguir las
instrucciones de operación. Ajuste solamente los controles indicados
en las instrucciones de operación, ya que un ajuste inadecuado de
otros controles podría resultar en daños y a menudo requerirán un
trabajo difícil por un técnico cualificado para devolver el televisor a
su funcionamiento normal.
Un sistema de antena esterior no deberá colocarse cerca de líneas de alta
tensión ni otros circuitos de iluminación o alimentación, ni donde
pueda entrar en contacto con tales líneas o circuitos.
CUANDO INSTALE UN SISTEMA DE ANTENA EXTERIOR,
TENGA EXTREMADO CUIDADO PARA EVITAR QUE ENTRE
EN CONTACTO CON TALES LÍNEAS DE ALIMENTACIÓN O
CIRCUITOS, YA QUE TAL CONTACTO PODRÍA RESULTAR
INVARIABLEMENTE FATAL.
Cuando el funcionamiento del televisor haya cambiado
notablemente — esto indica la necesidad del servicio de reparación.
Servicing — Do not attempt to service the TV set yourself. To open or
remove the covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
Cerciórese de que el sistema de antena esté puesto a tierra a fin de que
proporcione cierta protección contra sobretensiones y cargas estáticas.
La Sección 810 del Código Eléctrico Nacional (NEC) de EE.UU. y la
Sección 54 del Código Eléctrico Canadiense ofrecen informacón con
respecto a la puesta a tierra adecuada de una unidad de descarga de
antena, el tamaño de los conductores de puesta a tierra, la ubicación de
la unidad de descarga de la antena, la conexión de los electrodos de
puesta a tierra, y los requisitos de tales electrodos.
Reparación — No intente nunca reparar el televisor por sí mismo. La
apertura o extracción de cubiertas podría exponerle a tensiones
peligrosas u otros peligros. En caso de avería solicite los servicios de
personal de reparación cualificado.
Replacement Parts — When replacement parts are required, be sure
the service technician certifies in writing that he has used replacement
parts specified by the manufacturer that have the same characteristics as
the original parts. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
Reemplazo de piezas — Cuando sea necesario reemplazar piezas,
cerciórese de que el técnico de reparación utilice las piezas de reemplazo
especificadas por el fabricante u otras que posean las mismas
características que las originales. Las substituciones no autorizadas
podrían resultar en incendios, descargas eléctricas, u otros peligros.
Safety Check — Upon completion of any service or repairs to the TV
set, ask the service technician to perform routine safety checks (as
specified by the manufacturer) to determine that the TV set is in safe
operating condition, and to so certify.
Comprobación de seguridad — Al finalizar cualquier reparación de
este televisor, solicite al técnico de reparación que realice las
comprobaciones de sguridad (especificadas por el fabricante) para
determinar y certificar si el producto se encuentra en las condiciones de
operación apropiadas.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome to Toshiba .............................................................................................................................. 1
Exploring your new TV............................................................................................................................... 1
Selecting a location for the TV .................................................................................................................... 1
Connecting your TV ............................................................................................................................... 2
Connecting a VCR...................................................................................................................................... 2
Connecting a cable converter box................................................................................................................ 3
Connecting a cable converter box and VCR ................................................................................................ 3
Connecting a DVD/satellite receiver and VCR ........................................................................................... 4
Connecting a DVD with ColorStream™ and a VCR ................................................................................. 4
Connecting two VCRs ................................................................................................................................ 5
Connecting a camcorder ............................................................................................................................. 6
Connecting an audio amplifier .................................................................................................................... 6
Using the remote control ..................................................................................................................... 7
Preparing the remote control for use ........................................................................................................... 7
Installing the remote control batteries ......................................................................................................... 7
Using the remote control with a VCR or cable TV converter ...................................................................... 7
Programming the remote control for use with a VCR or cable TV converter ............................................... 8
VCR code table ..................................................................................................................................... 8
Cable TV converter code table .............................................................................................................. 9
Learning about the remote control ............................................................................................................ 10
Setting up your TV .............................................................................................................................. 11
Changing the on-screen display language .................................................................................................. 11
Selecting the antenna input ....................................................................................................................... 11
Using the TV/VIDEO button on the TV............................................................................................ 12
Adding channels to the TV’s memory ....................................................................................................... 12
Programming channels automatically .................................................................................................. 12
Adding and erasing channels manually ................................................................................................ 13
Changing channels .................................................................................................................................... 13
Using the TV’s features ...................................................................................................................... 13
Adjusting the channel settings ................................................................................................................... 13
Switching between two channels ......................................................................................................... 13
Programming your favorite channels ................................................................................................... 14
Using the V-Chip ...................................................................................................................................... 15
Selecting a PIN code ........................................................................................................................... 15
Blocking programs by ratings .............................................................................................................. 17
Ratings definitions (MPAA, Youth TV, TV) ........................................................................................ 17
Blocking unrated movies and programs ............................................................................................... 19
Blocking channels ............................................................................................................................... 20
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Lock ............................................................................................................................................... 21
Channel labels ........................................................................................................................................... 22
Video labels............................................................................................................................................... 23
Watching picture-in-picture (PIP) ............................................................................................................. 24
Switching the main and small pictures ................................................................................................ 24
Changing the position of the small picture .......................................................................................... 25
Freezing the small picture .................................................................................................................... 25
Watching multi-window PIP ..................................................................................................................... 25
Adjusting the picture ................................................................................................................................. 26
Adjusting the picture quality ............................................................................................................... 26
Selecting the color temperature ........................................................................................................... 26
Adjusting the picture preference .......................................................................................................... 27
Watching video input ................................................................................................................................ 27
Displaying on-screen information ............................................................................................................. 27
Setting the off-timer .................................................................................................................................. 27
Auto power off .......................................................................................................................................... 27
Using the closed caption feature ................................................................................................................ 28
Adjusting the sound .................................................................................................................................. 29
Muting the sound ............................................................................................................................... 29
Selecting stereo/SAP broadcasts ........................................................................................................... 29
Adjusting the sound quality................................................................................................................. 30
Using the surround sound feature ....................................................................................................... 30
Using the sub-bass system (SBS) ......................................................................................................... 31
Viewing the demonstration (DEMO) mode.............................................................................................. 31
Understanding the last mode memory feature ........................................................................................... 31
Appendix ............................................................................................................................................... 32
Cleaning and care...................................................................................................................................... 32
Troubleshooting ........................................................................................................................................ 32
Specifications ............................................................................................................................................ 33
Limited United States warranty ................................................................................................................. 34
Attention Canadian customers ............................................................................................................ 35
Index ...................................................................................................................................................... 36
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome to Toshiba
Congratulations! You have purchased one of the finest color TVs on
the market. The goal of this manual is to guide you through setting up
and operating your Toshiba TV as quickly as possible. Please make sure
you have received the following items: TV, remote control, batteries,
manual, registration card, and extended service plan literature. If you
did not receive all of the items or if any of the items are damaged or
broken, please contact your Toshiba dealer. In addition, you may need
to purchase other audio or video cables to connect your equipment.
See “Connecting your TV” on page 2 for more information.
Please read all safety and operating instructions carefully before you
begin.
POWER
TIMER
LIGHT RECALL
MUTE TV/VIDEO
TV
CABLE
VCR
Exploring your new TV
You can operate your TV using the buttons on the front panel or the
remote control. The back panel provides all the terminal connections
you will need to connect other equipment to your TV.
2
5
8
0
3
6
1
4
CH
9
7
VOL
MENU
CH RTN
Power Indicator (Red)
ENT
100
ADV/
MENU TV/VIDEO
VOLUME
CHANNEL
PIP CH
AUDIO
VIDEO-3 IN
C.CAPT
VIDEO L/MONO
R
POWER
ENTER
FAV
FAV
32AX60
Video 3
Menu
Volume Channel
POWER
RESET
EXIT
TV/Video
Remote Sensor
ADV/
PIP CH
STOP SOURCE
PLAY PIP
REC TV/VCR REW
FF
Power Indicator (Red)
POWER
STILL LOCATE SWAP
VOLUME
CHANNEL
TV/VIDEO
MENU
AUDIO
VIDEO-3 IN
VIDEO L/MONO
R
36AX60
Video 3
Menu
Volume
Channel
POWER
TV/Video
Remote Sensor
ANT (75Ω)
ANT-1
OUT
ANT-2
DVD IN
COLOR
OUT
VIDEO
IN
VIDEO 2 VIDEO 1
Caution:
Y
STREAM
INPUT
VIDEO
L
The plug has one prong wider than the other
and will fit only one way into a standard
electrical outlet (120 volt AC, 60 Hz). If the
plug does not fit into the outlet, try turning it
around. If the plug still does not fit, the outlet
is probably non-standard and must be
replaced by a qualified electrician. Do not
tamper with the plug or try to force it
into a non-standard outlet.
MONO
L/MONO
Cb
L
ANT (75Ω)
S VIDEO
ANT-1
OUT
OUT
ANT-2
DVD IN
COLOR
IN
VIDEO
VIDEO
2
VIDEO
1
AUDIO
R
Y
VIDEO
SYSTEM
AUDIO
R
AUDIO
R
INPUT
L
Cr
MONO
L/MONO
UDIO
Cr
A
S
VIDEO
AUDIO
Cb
A
UDIO
R
R
Selecting a location for the TV
• Place the TV on the floor or on a sturdy platform in a location
where light does not directly hit the screen.
• Place the TV far enough from the walls to allow proper ventila-
tion. Inadequate ventilation may cause overheating, which may
damage the TV.
wide prong
The model number and serial number are on the back of your TV.
Record these numbers in the spaces below. Refer to these numbers
whenever you communicate with your Toshiba dealer about this TV.
Model number: ________________________
Serial number: ________________________
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting your TV
If you have not connected electronic equipment before, or you have
been frustrated in the past, you may wish to read this section.
Note: Cables are not supplied.
• A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cables use “F” connectors.
• Audio and video cables are usually color coded according to use:
yellow for video; red and white for audio. The red audio cable is
for the stereo right channel; the white audio cable is for the stereo
(or mono) left channel. If you look at the rear panel of the TV,
you will see that the terminals are color coded in the same manner
as the cables.
• S-video cables provide better picture performance. S-video cables
can be used only with S-video compatible components.
• ColorStreamTM cables come in sets of three and provide the best
picture performance. ColorStream cables can be used only with
ColorStream compatible components.
Caution:
S-Video
Cable
ANTENNA
Do not plug in the TV power cord until
you have finished connecting all of your
equipment.
Coaxial Cable
ColorStream
Cable
AUDIO
Cable
VIDEO
Cable
Connecting a VCR
This connection allows you to watch local channels and video pro-
grams, play or record on the VCR while watching TV, and record
from one channel while watching another channel.
You will need:
• one coaxial cable
• one pair of audio cables (only one cable for a mono VCR)
• one video cable
Cable Lead-in from Cable Box
or Antenna
Caution:
TV
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
ANT (75Ω)
If you have an S-VHS VCR, use the S-video
connections and omit the video cable.
ANT-1
OUT
ANT-2
DVD IN
COLOR
OUT
VIDEO
IN
VIDEO 2 VIDEO 1
Y
STREAM
INPUT
Do not connect the video cable and the
S-video cable to Video-1 simultaneously.
VIDEO
L
MONO
L/MONO
Cb
L
S VIDEO
AUDIO
R
AUDIO
R
AUDIO
R
Cr
Stereo VCR
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a cable converter box
Note:
This connection allows you to watch cable and premium channels.
To use the TV features (such as PIP swap, Channel y z, channel
block, favorite channels, or channel labels ), select ANT-1. To view
premium channels, select ANT-2, tune the TV to channel 3 or 4
(whichever channel is vacant in your area), and use the converter box
to change channels.
When you use a converter box with your TV,
there may be features you will not be able to
program using the remote control, such as
such as PIP swap, Channel y z, channel
block, favorite channels, or channel labels.
You will need:
• two coaxial cables
From Cable
ANT (75Ω)
ANT-1
OUT
ANT-2
DVD IN
COLOR
OUT
VIDEO
IN
DEO 2 EO 1
Y
STREAM
INPUT
VIDEO
L
MONO
L/MONO
Cb
L
S VIDEO
AUDIO
R
AUDIO
R
AUDIO
R
Cr
IN
OUT
cable converter box
Connecting a cable converter box and VCR
This connection allows you to watch and record basic and premium
cable channels, as well as watch videotapes. Change the TV to Video
mode. Tune the VCR to channel 3 or 4 (the same channel as the
converter box output switch). Use the cable converter box to change
channels. Set the PIP source to TV mode (see page 24).
You will need:
• three coaxial cables
• one pair of audio cables (one single cable for a mono VCR)
• one video cable
• one cable splitter
From Cable
IN
cable splitter
OUT
OUT
cable converter box
TV
ANT (75Ω)
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
ANT-1
OUT
ANT-2
DVD IN
OUT
VIDEO
IN
VIDEO 2 VIDEO 1
If you have an S-VHS VCR, use the S-video
connections and omit the video cable.
COLOR
STREAM
INPUT
Y
VIDEO
L
MONO
L/MONO
Cb
L
Caution:
S VIDEO
AUDIO
R
AUDIO
R
AUDIO
R
Cr
Do not connect the video cable and the
S-video cable to Video-1 simultaneously.
Stereo VCR
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD/ satellite receiver and VCR
This connection allows you to watch DVD/satellite, video, or TV
programs. You can record from the DVD/satellite receiver and TV, as
well as record one TV channel while watching another channel.
You will need:
• one coaxial cable
• three pairs of audio cables (one pair and two single cables for a
mono VCR)
• two video cables
• one S-video cable
To Satellite
DVD / Satellite Receiver
AUDIO
OUT
L
VIDEO
OUT
S VIDEO
Satellite IN
R
TV
Note:
ANT (75Ω)
You can use a video cable instead of the
S-video cable, but the picture quality will
decrease.
ANT-1
OUT
ANT-2
DVD IN
COLOR
OUT
VIDEO
IN
VIDEO 2 VIDEO 1
If you use an S-video cable between the TV
and DVD/satellite receiver, make the audio
connections only and omit the video
connection.
Y
STREAM
INPUT
VIDEO
L
MONO
L/MONO
Cb
L
S VIDEO
AUDIO
R
AUDIO
R
AUDIO
R
Cr
Caution:
Do not connect the video cable and the
S-video cable to Video-1 simultaneously.
Stereo VCR
VIDO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
Connecting a DVD with ColorStream™ and a VCR
This connection allows you to watch DVD, video, or TV programs,
and record DVD or TV programs. You can record from one source
and watch a program from another source. Your TV is capable of using
ColorStream (color difference). Connecting your TV to a ColorStream
compatible DVD, such as a Toshiba DVD, can greatly enhance
picture quality and performance.
You will need:
• one coaxial cable
• three pairs of audio cables (one pair and two single cables for a
mono VCR)
• two video cables
• one set of ColorStream video cables
4
Download from Www.Somanuals.com. All Manuals Search And Download.
To Antenna
DVD Player with ColorStreamTM
AUDIO
OUT
L
L
VIDEO
OUT
COLORSTREAMTM
S VIDEO
R
R
Y
Cb
Cr
TV
ANT (75Ω)
Note:
To play from the DVD, the DVD and TV must
use ColorStream connections. To record from
the DVD, the DVD and TV must select Video.
ANT-1
OUT
ANT-2
DVD IN
OUT
VIDEO
IN
VIDEO 2 VIDEO 1
COLOR
STREAM
INPUT
Y
VIDEO
L
MONO
L/MONO
Cb
Cr
L
S VIDEO
AUDIO
R
AUDIO
R
AUDIO
R
Stereo VCR
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
Connecting two VCRs
This connection allows you to record from one VCR to another VCR
while watching a video program. You also will be able to record from
one TV channel while watching another channel.
You will need:
• one coaxial cable
• two pairs of audio cables (two single cables for mono VCRs)
• two video cables
Stereo VCR / Playback
Note:
VIDEO
AUDIO
L
R
If you are using an S-VHS VCR, use the
S-video connections and omit the video
cable.
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
Caution:
TV
Do not connect one VCR to the output and
input jacks on the TV at the same time.
ANT (75Ω)
Do not connect the video cable and the
S-video cable to Video-1 simultaneously.
ANT-1
OUT
ANT-2
DVD IN
OUT
VIDEO
IN
VIDEO 2 VIDEO 1
COLOR
STREAM
Y
VIDEO
INPUT
L
MONO
L/MONO
Cb
L
S VIDEO
AUDIO
R
AUDIO
R
AUDIO
R
Cr
Stereo VCR / Recording
VIDO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH 3
CH 4
OUT
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a camcorder
This connection allows you to watch videos recorded on a camcorder.
Note:
You will need:
If you are using an S-VHS camcorder with an
S-video output, connect this to the S-video
input on the TV and omit the video cable.
• one pair of audio cables
• one video cable
Caution:
Do not connect the video cable and the
S-video cable to Video-1 simultaneously.
Camcorder
Camcorder
VIDEO AUDIO
VIDEO AUDIO
OUT
L
OUT
L
R
R
TV Back
ANT (75Ω)
ANT-1
OUT
ANT-2
DVD IN
OUT
VIDEO
IN
VIDEO 2 VIDEO 1
COLOR
STREAM
INPUT
Y
VIDEO
TV Front
L
MONO
L/MONO
Cb
L
MENU TV/VIDEO
VOLUME
S VIDEO
AUDIO
R
AUDIO
R
AUDIO
R
Cr
VIDEO 3
VIDEO L/MONO
R
Connecting an audio amplifier
This connection allows you to use an audio amplifier to adjust the
audio level. This connection also allows you to use external speakers.
To control the audio, turn on the TV and the stereo amplifier.
You will need:
• one pair of audio cables
To Cable, Cable Box
or Antenna
Audio Amplifier
AUDIO
L
R
IN
OUT
TV
ANT (75Ω)
ANT-1
OUT
ANT-2
DVD IN
OUT
IN
VIDEO 2 VIDEO 1
VIDEO
COLOR
STREAM
INPUT
Y
VIDEO
L
MONO
L/MONO
Cb
L
S VIDEO
AUDIO
R
AUDIO
R
AUDIO
R
Cr
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the remote control
Preparing the remote control for use
Note:
The remote control will operate your TV, most VCR models, and
most cable TV converters together, even if they are different brands. If
you will be using your TV with a Toshiba VCR, your remote control
is already programmed and ready to use. If you own different brands
of VCRs and/or converters, you will need to program your remote
control (see “Programming the remote control for use with a VCR or
cable TV converter” on page 8).
The remote control provided with your TV
may or may not operate certain features on
your VCR, cable TV converter, or other
electronic components. Refer to the owner’s
manuals provided with your other
components to see which features are
available. In addition, the other remote
controls may have buttons not available on
your TV’s remote control. If you would like to
use those features or buttons, you may need
to use the original remote controls for your
other components.
Installing the remote control batteries
To install the batteries:
1. Slide the battery cover off the back of the remote control.
Caution:
• Dispose of batteries in a designated
disposal area. Do not throw batteries
into a fire.
• Do not mix battery types or combine used
batteries with new ones.
2. Install two “AA” size batteries. Match the + and – symbols on the
batteries to the symbols on the battery compartment.
• Remove dead batteries immediately to
prevent battery acid from leaking into the
battery compartment.
• If you do not intend to use the remote
control for a long time, remove the
batteries.
POWER
3. Slide the battery cover back onto the remote control until the
lock snaps.
LIGHT RECALL
POWER
TV
MUTE TV/VIDEO
TIMER
CABLE
VCR
TV/Cable/VCR
switch
Using the remote control with a VCR
or cable TV converter
2
5
8
0
3
6
1
4
CH
Channel
Number
To control a Toshiba VCR:
9
7
Set the TV/CABLE/VCR switch to the VCR position. The
shaded buttons in the illustration at right will then control the
VCR. The unshaded buttons will operate the TV as usual.
VOL
MENU
CH RTN
ENT
100
Enter
ADV/
PIP CH
To control a cable TV converter:
C.CAPT
Program the remote control to recognize the brand of your
converter (see “Programming the remote control for use with a
VCR or cable TV converter” on page 8). Set the TV/CABLE/
VCR switch to the CABLE position. The shaded buttons in the
top portion of the illustration at right will then control the cable
TV converter.
ENTER
FAV
FAV
RESET
EXIT
ADV/
PIP CH
STOP SOURCE
PLAY PIP
Play
Stop
REC TV/VCR REW
FF
Fast Forward
Rewind
STILL LOCATE SWAP
TV/VCR
Record
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming the remote control for use
with a VCR or cable TV converter
The remote control provided with your Toshiba TV is preprogrammed
to operate Toshiba VCRs also.
POWER
TIMER
LIGHT RECALL
MUTE TV/VIDEO
POWER
Recall
TV
CABLE
VCR
To operate non-Toshiba components using
the remote control provided with your TV:
TV/Cable/VCR
switch
1. Refer to the VCR and cable TV converter code table below to
find the corresponding code for your VCR or cable TV converter
brand.
2
3
1
4
CH
5
8
0
6
Channel
Number
9
7
If more than one code is listed, try each one separately until you
find the one that works.
VOL
CH RTN
ENT
100
ADV/
PIP CH
2. If you are reprogramming the remote control to operate your:
• VCR: Set the TV/CABLE/VCR switch on the remote control
to VCR.
FAV
FAV
ENTER
• Cable TV converter: Set the TV/CABLE/VCR switch on the
remote control to CABLE.
ADV/
PIP CH
3. Hold down the RECALL button while using the Channel
Number buttons to enter the three-digit code of your VCR or
cable TV converter brand.
STOP SOURCE
PLAY PIP
4. Point the remote control at the VCR or converter and press
POWER to test the code.
Note:
•
Every time you replace the batteries, you
will need to reprogram the remote control.
• If the VCR or converter turns on, you have entered the
correct code.
•
Some newer VCRs are capable of working
on either of two remote codes. These
VCRs have a switch labeled “VCR1/VCR2.”
If your VCR has this kind of switch, it may
not respond to any of the codes for your
VCR brand. In this case, set the switch to
the other position (VCR1 or VCR2) and
reprogram the remote control.
• If the VCR or converter does not respond to the remote
control, you may have entered the incorrect code.
Repeat steps 1–4 using another code.
5. Reset the TV/CABLE/VCR switch to TV to control the TV.
For future reference, write down the codes you used:
VCR code _____________________
Cable TV converter code _____________________
VCR code table
Brand
Code
Adventura
Aiko
019
297
CCE
Citizen
091, 297
056, 297
Fisher
Fuji
066, 073, 085, 123
052, 054
Aiwa
019
Colt
091
Funai
019, 344
Akai
060, 068, 080, 125,
261
054
259
056
259
123
206
Craig
056, 066, 091, 259
054, 060, 079
259
039, 064, 297
039
019
056
056
051
019, 021, 056, 062,
080, 087, 140, 203,
227, 228, 230, 231,
297, 313, 314, 380,
498
Garrard
GE
Go Video
Goldstar
Gradiente
019, 344
054, 079, 084, 221
251, 298
037, 056, 057
019
Curtis Mathes
Cybernex
Daewoo
Daytron
Dynatech
Electrohome
Electrophonic
Emerex
American High
Asha
Audiovox
Beaumark
Bell & Howell
Brandt
Harley Davidson 019
Harman/Kardon
Harwood
Headquarter
HI-Q
057, 094
087, 091
065
Broksonic
140, 203, 230, 314,
380
056
054
039
100
Emerson
066
Calix
Hitachi
060, 061, 084, 124,
185, 254
060
027, 060, 086
057, 060, 086
Canon
Capehart
Carver
Jensen
JVC
Kenwood
8
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR code table (cont.)
Brand
Code
KLH
Kodak
Lloyd
Logik
LXI
Magnavox
091
054, 056
019, 227
091
Sanky
Sansui
Sanyo
Scott
058, 067
060, 086
Garrard
CG Electronics
Gemini
General Instrument 030, 295
Gold Star
Hamlin
172
075
034, 089
065, 066, 123, 259
062, 064, 140, 203,
229, 230, 231
054, 056, 061, 065,
066, 073, 085, 123,
124
067, 081
091
259
091
051, 052, 053, 054
061
019, 054, 062, 100,
129
019, 344
060
019, 060
054, 181
019, 054, 056, 071
206
227, 259
056
059, 163
028, 039, 053, 278,
292
030
026
054, 058, 100, 129,
168
259
054, 100
056
054
054
019, 054, 056, 058,
065, 066, 067, 123,
259
Sears
Magnin
Marantz
Marta
Matsushita
MEI
Hitachi
Hytex
Jasco
Sharp
Shintom
Shogun
Singer
Sony
STS
Sylvania
172
Jerrold
022, 030, 031, 033,
034, 066, 295
052
046
019
Memorex
Macom
Magnavox
Memorex
Movietime
NSC
MGA
MGN Technology 259
Minolta
Mitsubishi
062, 080
175
Symphonic
Tatung
Teac
Technics
Teknika
Telefunken
TMK
089, 175
026, 038, 267
019, 040, 126
019
044, 046, 047, 048,
049, 050, 172
042, 163, 552
061, 124
062, 080, 086, 094,
192, 233, 261
054, 067
019, 259
019, 091
077
Oak
Panasonic
Paragon
Philips
Motorola
MTC
Multitech
NAD
Pioneer
Popular Mechanics 419
Pulsar
Toshiba
062, 064, 085, 229,
231, 385
NEC
057, 059, 060, 069,
019
086
056
259
054
Totevision
Unitech
Vector
Vector Research
Video Concepts
Videosonic
Wards
056, 259
259
064
057, 059
059, 064, 080
259
019, 054, 061, 066,
067, 081, 091, 168,
231, 259
019, 054, 091
057
052, 053, 058
RCA
Regal
Recoton
Regency
Rembrandt
Runco
040
039, 278, 292
419
021
030, 089
019
Nikko
Noblex
Olympus
Optimus
Optonica
Orion
056, 067, 077, 123
081
498
054, 096, 181, 244,
473
054, 056, 057, 059,
061, 073, 259
Samsung
059, 163
Panasonic
Scientific Atlanta 025, 027, 036, 296
Signal
Signature
SL Marx
Sprucer
Standard
034, 059
030
059
Penney
XR-1000
Yamaha
Zenith
Pentax
Philco
061, 084, 124
054
040
Philips
Pilot
Pioneer
Portland
Protec
054, 081, 100, 129
056
077, 086
039
091
058
065
065
Components
174
022, 034, 066
034, 059
034
020
059
020
031, 032, 078
019
034
041, 172
026
Cable TV converter
code table
Starcom
Stargate
Starquest
Sylvania
Teleview
Texscan
Tocom
Toshiba
Tusa
Brand
Code
ABC
020, 022, 027, 030,
Pulsar
032, 033, 036, 066
Quarter
Quartz
Quasar
Radio Shack
Radix
Antronix
Archer
Belcor
041
041, 058, 172
075
054, 096
019, 056, 344
056
Cable Star
Cabletenna
Cableview
Century
Citizen
075
041
041
172
Unika
Randex
RCA
056
United Artists
United Cable
Universal
061, 079, 084, 096,
124, 125, 168, 221
019, 054, 056, 065,
066, 067, 081, 085,
123, 259
053
058
064, 259
022
041, 058, 075, 096,
172, 210
046, 079, 230
019
172
Realistic
Colour Voice
Comtronics
Contec
044, 050
059, 079
038
Viewstar
Zenith
Zentek
Ricoh
Runco
Samsung
419
Dae Ryung
Eastern
027
021
Focus
419
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Learning about the remote control
Light
Recall
POWER turns the TV on and off (page 8)
POWER
LIGHT RECALL
TV/VIDEO selects input source (page 12)
POWER
TV
TV/Cable/VCR
switch
MUTE TV/VIDEO TIMER
CABLE
VCR
Channel y z cycles through programmed channels
(page 12)
Timer
Mute
TV/Video
2
5
8
0
3
6
1
4
TV/Cable/VCR switch switches between TV, Cable, and VCR
(page 7)
CH
Channel
Channel
Numbers
9
7
Channel Numbers allow direct access to channels (page 13)
Volume
VOL
CH RTN
ENT
100
Channel
Return
Volume y z adjusts the volume level (page 29)
ADV/
PIP CH
MENU
Menu
Closed
Caption
Channel Return returns to the last viewed channel
(page 13)
C.CAPT
PIP Channel
Favorite Channels
Enter
FAV
ENTER
FAV
MENU allows access to programming menus (page 11)
RESET
Favorite Channels y z cycles through channels programmed
as favorite channels (page 14)
Reset
EXIT
Exit
ADV/
PIP CH
STOP SOURCE
PLAY PIP
ENTER sets programmed menu information (page 13)
PIP Buttons
REC TV/VCR REW
FF
EXIT exits programming menus (page 11)
STILL LOCATE SWAP
PIP Buttons allow access to PIP functions (pages 24–25)
STILL freezes the small PIP
SOURCE selects the PIP input source
PIP selects the picture-in-picture (PIP) mode
PIP CH yz changes the small PIP channel
LOCATE changes the position of the small PIP
SWAP switches the main picture and small PIP
STOP stops a videotape
REC starts recording a videotape
PLAY plays a videotape
FF fast forwards a videotape
REW rewinds a videotape
TV/VCR toggles between TV and VCR when viewing
while recording
MUTE mutes the sound (page 29)
RECALL displays on-screen information (page 27)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting up your TV
MENU TV/VIDEO
VOLUME
CHANNEL
After you have installed the batteries and programmed the remote
control, you will need to use the menu to set some preferences on
your TV. You can access the menu using the buttons on your TV or
remote control.
• When you make a menu selection, your changes occur immediately.
You do not have to press MENU or EXIT to save your changes.
Menu
TV/Video
• When you are finished programming the menus, you can press
EXIT to clear the on-screen display, or wait 15 seconds and the
on-screen display will disappear automatically. Your changes are
automatically saved either way.
POWER
LIGHT RECALL
TV
MUTE TV/VIDEO
TIMER
CABLE
VCR
TV/Video
Changing the on-screen display language
You can choose from three different languages (English, French, and
Spanish) for the on-screen displays. Menus and messages will appear in
the language you select.
2
5
8
0
3
6
1
4
CH
9
7
VOL
CH RTN
To select an on-screen display language:
1. Press MENU.
ENT
100
ADV/
PIP CH
MENU
Menu
Exit
2. Press x or • until the SET UP menu appears.
3. Press y or z to highlight LANGUAGE.
4. Press x or • to highlight your desired language.
.CAPT
C
ENTER
FAV
FAV
RESET
EXIT
ADV/
PICTURE AUDIO
LANGUAGE:
SETUP PREFER C.CAPT
PICTURE AUDIO
LANGUE:
SETUP PREFER C.CAPT
PIP CH
[ENGLISH]FRANCAIS
ESPANOL
[ANT1]ANT2
[TV]CABLE
ENGLISH[FRANCAIS]
ESPANOL
[ANT1]ANT2
[TV]CABLE
ANT1/2:
TV/CABLE:
CH PROGRAM
ANT1/2:
TV/CABLE:
PROGRAMME CAN
ADD/ERASE: [ADD]ERASE
MORE
ADD/EFF:
MORE
[ADD]EFF
[
SELECT
]
[
MOVE
]
[
]
[
CHOISIR
]
BOUGER
Selecting the antenna input
You can connect to one of two different antenna input sources using
the antenna input (ANT 1 or ANT 2).
To select the antenna input:
1. Press MENU.
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight ANT 1/2.
4. Press x or • to highlight either ANT 1 or ANT 2, depending on
the antenna terminal you wish to use.
PICTURE AUDIO
LANGUAGE:
SETUP PREFER C.CAPT
[ENGLISH]FRANCAIS
ESPANOL
ANT1/2:
TV/CABLE:
CH PROGRAM
[ANT1]ANT2
[TV]CABLE
ADD/ERASE: [ADD]ERASE
MORE
[
SELECT
]
[
MOVE
]
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the TV/ VIDEO button on the TV
Use the TV/VIDEO button on the TV to monitor or change the signal
source connected to your TV.
To select the signal source:
MENU TV/VIDEO
VOLUME
CHANNEL
Press the TV/VIDEO button on the TV to select either VIDEO 1,
VIDEO 2, VIDEO 3, ColorStream, ANT 1, or ANT 2.
Repeatedly press the TV/VIDEO button on the TV until the
signal source you wish to use displays in purple.
Menu
VIDEO 1
TV/Video
VIDEO 2 ANT 1
VIDEO 3
COLOR
STREAM
ANT 2
TO SELECT PUSH TV/VIDEO
Adding channels to the TV’s memory
When you press Channel ▲ or ▼ on the TV or remote control,
the TV stops only on the channels stored in the TV’s memory.
Note: To tune the TV to a channel not programmed in the TV’s
memory, use the Channel Number buttons on the remote control.
Follow the steps below and on the next page to program channels into
the TV’s memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them in the TV’s memory. After the channels are stored auto-
matically, you can manually add or erase individual channels (see page
13. If you use both ANT-1 and ANT-2 terminals, you will need to
program channels for each input source.
POWER
TIMER
LIGHT RECALL
MUTE TV/VIDEO
To program channels automatically:
1. Press MENU.
TV
CABLE
VCR
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight TV/CABLE.
TV/Video
Channel
2
5
8
0
3
6
1
4
4. Press x or • to highlight either TV or CABLE, depending on
which you use. If you use an antenna, highlight TV. If you use
cable, highlight CABLE.
CH
9
7
VOL
CH RTN
5. Press z to highlight CH PROGRAM.
ENT
100
ADV/
PIP CH
MENU
Menu
Exit
PICTURE AUDIO
LANGUAGE:
SETUP PREFER C.CAPT
PICTURE AUDIO
LANGUAGE:
SETUP PREFER C.CAPT
C.CAPT
[ENGLISH]FRANCAIS
ESPANOL
[ANT1]ANT2
[TV]CABLE
[ENGLISH]FRANCAIS
ESPANOL
[ANT1]ANT2
[TV]CABLE
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE: [ADD]ERASE
MORE
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE: [ADD]ERASE
MORE
ENTER
FAV
FAV
RESET
EXIT
[
MOVE
]
[
START
]
[
SELECT
]
[
MOVE
]
ADV/
PIP CH
6. Press x or • to start automatic channel programming. The TV
automatically cycles through every TV or cable channel
(depending on which you selected), and stores all active channels
in the TV’s memory.
7. When automatic channel programming is complete, the message
“CH Programming Completed” appears.
8. Press Channel ▲ or ▼ to view the programmed channels.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding and erasing channels manually
MENU TV/VIDEO
VOLUME
CHANNEL
After you have automatically programmed the channels into the TV’s
memory, you can manually add and erase individual channels.
To add a channel to or erase a channel from the TV’s memory:
Menu
1. Tune the TV to the channel you want to add or erase. If you are
adding a channel, you will need to use the Channel Number
buttons to select the channel.
2. Press MENU.
3. Press x or • to highlight the SET UP menu.
4. Press y or z to highlight ADD/ERASE.
POWER
LIGHT RECALL
TV
PICTURE AUDIO
LANGUAGE:
SETUP PREFER C.CAPT
MUTE TV/VIDEO
TIMER
CABLE
VCR
[ENGLISH]FRANCAIS
ESPANOL
ANT1/2:
TV/CABLE:
CH PROGRAM
ADD/ERASE: [ADD]ERASE
MORE
[ANT1]ANT2
[TV]CABLE
Channel
2
5
8
0
3
6
1
4
CH
Channel
Number
[
SELECT
]
[
MOVE
]
9
7
VOL
CH RTN
5. Press x or • to highlight ADD or ERASE, whichever function
ENT
100
you want to perform.
ADV/
PIP CH
MENU
Menu
Exit
6. Press ENTER.
.CAPT
C
7. Press EXIT to return to normal TV viewing.
8. Repeat steps 1–7 for other channels you want to add or erase.
ENTER
FAV
FAV
RESET
Changing channels
EXIT
ADV/
PIP CH
To change to the next programmed channel:
STOP SOURCE
PLAY PIP
Press Channel y or z on the TV, or CH y or z on the remote
control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100). Note:For
channels 100 and higher, press the 100 button, then the next
two channel numbers (for example, to select channel 100, press
100–0–0; to select channel 125, press 100–2–5).
POWER
TIMER
LIGHT RECALL
Using the TV’s features
TV
MUTE TV/VIDEO
CABLE
VCR
Adjusting the channel settings
2
5
8
0
3
6
1
4
Switching between two channels
CH
You can switch between two channels without entering an actual
channel number each time.
Channel
Number
9
7
VOL
CH RTN
To switch between two channels:
ENT
100
Channel
Return
1. Select the first channel you want to view.
ADV/
PIP CH
MENU
2. Select a second channel using the Channel Number buttons
(0–9 and 100).
C.CAPT
ENTER
FAV
FAV
3. Press CH RTN. The previous channel will display.
Every time you press CH RTN, the TV will switch back and forth
between the last two channels you tuned the TV to.
RESET
EXIT
ADV/
PIP CH
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming your favorite channels
POWER
TIMER
LIGHT RECALL
MUTE TV/VIDEO
The Favorite Channel feature allows you to use the FAV y z buttons
on the remote control to cycle through your favorite channels and
skip over channels you do not normally watch. You can program a
maximum of 12 favorite channels.
TV
CABLE
VCR
Channel
2
5
8
0
3
6
1
4
Note: You can still use Channel ▲▼ to cycle through all the channels
you programmed into the TV’s memory.
CH
Channel
Number
9
7
To program your favorite channels:
VOL
CH RTN
1. Tune the TV to a channel you want to program as a favorite
channel.
ENT
100
ADV/
PIP CH
Menu
2. Press MENU.
3. Press x or • to highlight the SET UP menu.
4. Press y or z to highlight FAVORITE CH.
ENTER
FAV
FAV
Enter
Exit
PICTURE AUDIO
SETUP PREFER C.CAPT
ADV/
PIP CH
MORE
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER:
DEMO:
Favorite
Channel
0 MIN
[START]STOP
[
START
]
[
MOVE
]
5. Press x or • to display the FAVORITE CH menu. SET/CLEAR
will be highlighted.
6. Press x or • to highlight SET.
7. Press z to add the current channel to the list.
8. Press ENTER.
PICTURE AUDIO
SETUP PREFER C.CAPT
FAVORITE CH
[SET]CLEAR
2
0
0
5
0
0
6
0
0
11
0
0
[TV:CYAN, CABLE:BLUE]
[
]
[
SET
]
SELECT
9. Press EXIT to close the on-screen display.
10. Repeat steps 1–9 for a maximum of 12 channels.
To select your favorite channels:
Press FAV y or z on the remote control to cycle through the
favorite channels you programmed.
Note: The Favorite Channel feature will not work unless you
program at least one favorite channel.
To clear a favorite channel:
1. Tune the TV to the channel you want to clear from your favorite
channel list.
2. Press MENU.
3. Press x or • to highlight the SET UP menu.
4. Press y or z to highlight FAVORITE CH.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press x or • to display the FAVORITE CH menu. SET/CLEAR
POWER
TIMER
LIGHT RECALL
MUTE TV/VIDEO
will be highlighted.
TV
6. Press x or • to highlight CLEAR.
CABLE
VCR
PICTURE AUDIO
SETUP PREFER C.CAPT
Channel
2
5
8
0
3
6
1
4
CH
FAVORITE CH
SET[CLEAR]
Channel
Number
2
0
0
5
0
0
6
0
0
0
0
0
9
7
[TV:CYAN, CABLE:BLUE]
VOL
CH RTN
ENT
100
[
]
[
CLEAR
]
SELECT
ADV/
PIP CH
Menu
7. Press z, which clears the current channel number from the list.
8. Press ENTER.
ENTER
FAV
FAV
9. Press EXIT to close the on-screen display.
Enter
Exit
10. Repeat steps 1–9 for other channels you want to clear from your
favorite channel list.
ADV/
PIP CH
Using the V-Chip
You can use the V-Chip feature to block certain programs or channels,
thereby preventing others from viewing them.
Favorite
Channel
Selecting a PIN code
Before you can block programs and channels, you need to select a
personal identification number (PIN) code. The PIN code you select
allows you to access the V-Chip menu and prevents others from
changing the rating and blocking limits you set.
To select your PIN code and access the V-Chip menu:
1. Press MENU.
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight V-CHIP CONTROL.
4. Press x or • to display the Enter PIN Code screen.
PICTURE AUDIO
SETUP PREFER C.CAPT
PICTURE AUDIO
SETUP PREFER C.CAPT
MORE
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE
––––
V-CHIP CONTROL
FAVORITE CH
CH LABEL
VIDEO LABEL
TIMER:
0 MIN
DEMO:
[START]STOP
[
START
]
[
MOVE
]
SELECT [0-9]
END[EXIT]
5. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, select a
four-digit number to be your PIN code. After the code is entered,
the V-Chip Control menu appears.
6. Press y or z to highlight ENABLE BLOCKING.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Press x or • to highlight “Y,” which enables all blocking by
activating the V-Chip. See “Blocking programs by ratings” on
page 17, “Blocking unrated movies or programs” on page 19,
and “Blocking channels” on page 20.
(Note: Highlight “N” to deactivate the V-Chip and disable
blocking.)
PICTURE AUDIO
SETUP PREFER C.CAPT
ENABLE BLOCKING [Y]N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK
OFF
[
MOVE
]
[
SELECT
]
Note:
To change your PIN code:
If you forget your PIN code, follow steps 1–4
under “To change your PIN code” at left, then
press RECALL four times within five seconds.
This allows you to proceed to the
1. Press MENU.
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight V-CHIP CONTROL.
4. Press x or • to display the Enter PIN Code screen.
V-Chip Control menu and reset your PIN code.
5. Use the Channel Number buttons (0–9) to enter your existing
PIN code. After the code is entered, the V-Chip Control menu
appears.
POWER
LIGHT RECALL
6. Press y or z to highlight NEW PIN CODE.
TV
MUTE TV/VIDEO
TIMER
CABLE
VCR
7. Press x or • to display the New PIN Code screen.
2
5
8
0
3
6
1
4
PICTURE AUDIO
SETUP PREFER C.CAPT
PICTURE AUDIO
SETUP PREFER C.CAPT
CH
Channel
Number
ENABLE BLOCKING [Y]N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK
PLEASE ENTER NEW PIN CODE
––––
9
7
VOL
CH RTN
ENT
100
OFF
ADV/
PIP CH
[
MOVE
]
[
SELECT
]
SELECT [0-9]
END[EXIT]
Menu
8. Use the Channel Number buttons (0–9) to enter a new code.
After the new code is entered, the V-Chip Control menu appears.
ENTER
FAV
FAV
Enter
Exit
9. Press EXIT to return to normal TV viewing.
ADV/
PIP CH
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Blocking programs by ratings
Note:
The Motion Picture Association of America (MPAA) uses a rating
system to qualify motion picture content. Television broadcasters
employ a similar rating system to qualify the content of television
programs. The MPAA, Youth TV, and TV ratings work with the
V-Chip feature to allow you to block access to programs that exceed
the rating limits you set.
Press RECALL to see the rating of the program
you are viewing.
Ratings definitions
MPAA Ratings
X
For adults only.
NC17
R
Not intended for anyone 17 or under.
Restricted. Under 17 requires an accompanying parent or adult
guardian.
PG13
PG
G
Parents strongly cautioned. Some material may not be appropriate
for children under 13.
Parental guidance suggested. Some material may not be appropri-
ate for children.
General audience. Appropriate for all ages.
Youth TV Ratings
Y7, Y7FV
Directed to older children. Programs rated Y7 are designed for
children 7 and above. Programs in which fantasy violence may be
more intense or combative than other programs in this category
are rated Y7FV.
Y
For all children. Programs rated Y are designed to be appropriate
for all children.
TV Ratings
MA
Mature audience only. This program is specifically designed to be
viewed by adults and therefore may be unsuitable for children
under 17.
Language
Sex
Crude or indecent language.
Explicit sexual activity.
Graphic violence.
Violence
14
Parents strongly cautioned. This program contains some material
that many parents would find unsuitable for children under 14
years of age.
Dialog
Intensely suggestive dialog.
Strong, coarse language.
Intense sexual situations.
Intense violence.
Language
Sex
Violence
PG
Parental guidance suggested. This program contains material that
parents may find unsuitable for younger children.
Dialog
Some suggestive dialog.
Infrequent coarse language.
Some sexual situations.
Moderate violence
Language
Sex
Violence
G
General audience. Most parents would find this program suitable
for all ages.
No DLSV
Programs without any Dialog, Language, Sex, or
Violence ratings.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
To use the V-Chip to block programs by rating:
1. Press MENU.
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight V-CHIP CONTROL.
4. Press x or • to display the Enter PIN Code screen.
Not all programs are rated. To block programs
or movies that are unrated, see “Blocking
unrated movies and programs” on page 19.
5. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, select a
four-digit number to be your PIN code. After the code is entered,
the V-Chip Control menu appears.
6. Press y or z to highlight ENABLE BLOCKING.
7. Press x or • to highlight “Y,” which enables all blocking by
POWER
LIGHT RECALL
TV
MUTE TV/VIDEO
TIMER
CABLE
VCR
activating the V-Chip.
(Note: Highlight “N” to deactivate the V-Chip and disable
blocking.)
2
5
8
0
3
6
1
4
CH
Channel
Number
9
7
VOL
CH RTN
PICTURE AUDIO
SETUP PREFER C.CAPT
ENT
100
ADV/
PIP CH
ENABLE BLOCKING [Y]N
SET RATING
Menu
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK
OFF
ENTER
FAV
FAV
[
]
[
SELECT
]
MOVE
Enter
Exit
8. Press y or z to highlight SET RATING.
ADV/
PIP CH
9. Press x or • to display the Set Rating menu.
10. Press y or z to highlight MPAA Rating, Youth TV Rating, or
TV Rating.
11. Press • to select (or x to deselect) the ratings to be blocked.
Blocked ratings are signified with the symbol “x.” Unblocked
ratings are signified with the symbol “✔.” As you block ratings,
all ratings higher than the ones you select are blocked as well.
For example, if you block the MPAA rating R, the higher ratings
NC17 and X will also be blocked.
PICTURE AUDIO
SETUP PREFER C.CAPT
PICTURE AUDIO
SETUP PREFER C.CAPT
MPAA RATING:
X NC17 R PG13 PG
TV RATING: MA
DIALOG:
14
x
PG
G
G
x
x
LANGUAGE:
SEX:
YOUTH TV RATING:
Y7FV Y7
Y
VIOLENCE:
NO DLSV:
TV RATING
BACK TO V-CHIP MENU
[
MOVE
]
[
SELECT
]
[
MOVE
]
[
SELECT
]
12. When you finish selecting the ratings to be blocked:
• To return to the V-Chip menu, press y or z to highlight
BACK TO V-CHIP MENU, then press x or •.
• To return to normal TV viewing, press EXIT.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: When you try to view a program with a ratings block, a message
appears stating that the program has been blocked because the
program’s rating exceeds the set limits. To temporarily override the
block and view the program, press MUTE and enter your PIN code.
To reset your original ratings blocks, turn the TV off and then on
again.
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE
TO TEMPORARILY UN-BLOCK
––––
THIS PROGRAM HAS BEEN BLOCKED
TV-PG L V
EXCEEDS SET LIMITS
PUSH MUTE TO ENTER PIN
SELECT [0-9]
END[EXIT]
Caution:
Blocking unrated movies and programs
Blocking unrated television programs (with a
rating of “TV NONE”) may block emergency
messages.
Some movies and programs are not rated. You can use the V-Chip to
block unrated movies and programs.
To block unrated movies and programs:
1. Press MENU.
POWER
LIGHT RECALL
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight V-CHIP CONTROL.
4. Press x or • to display the Enter PIN Code screen.
TV
MUTE TV/VIDEO
TIMER
CABLE
VCR
5. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, select a
four-digit number to be your PIN code. After the PIN code is
entered, the V-Chip Control menu appears.
2
5
8
0
3
6
1
4
CH
Channel
Number
9
7
VOL
CH RTN
6. Press y or z to highlight ENABLE BLOCKING.
ENT
100
7. Press x or • to highlight “Y,” which enables all blocking by
ADV/
PIP CH
Menu
activating the V-Chip.
(Note: Highlight “N” to deactivate the V-Chip and disable
blocking.)
ENTER
FAV
FAV
Enter
Exit
8. Press y or z to highlight SET BLOCKING OPTIONS.
9. Press x or • to display the unrated movie/program blocking
ADV/
PIP CH
menu.
10. Press y or z to highlight BLOCK TV NONE RATING.
11. Press x or • to highlight “Y” to block movies/programs rated
“TV None.” (Note: Highlight “N” to unblock unrated programs.)
12. Press EXIT to return to normal TV viewing.
PICTURE AUDIO
SETUP PREFER C.CAPT
PICTURE AUDIO
SETUP PREFER C.CAPT
ENABLE BLOCKING [Y]N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK MPAA UNRATED:
BLOCK TV NONE RATING: [Y]N
BACK TO V-CHIP MENU
[Y]N
BLOCK CHANNEL
VIDEO LOCK
NOTICE: ENABLING THIS OPTION
MAY BLOCK EMERGENCY
MESSAGES
OFF
[
MOVE
]
[
]
[
MOVE
]
[
SELECT
]
SELECT
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Blocking channels
POWER
TIMER
LIGHT RECALL
MUTE TV/VIDEO
You can block a maximum of four TV channels and four cable
channels. Blocked channels cannot be viewed regardless of their
ratings. If you try to display a blocked channel, the TV will display the
nearest unblocked channel.
TV
CABLE
VCR
2
5
8
0
3
6
1
4
CH
To block a channel:
Channel
Number
1. Tune the TV to the channel you want to block.
2. Press MENU.
9
7
VOL
CH RTN
ENT
100
3. Press x or • to highlight the SET UP menu.
4. Press y or z to highlight V-CHIP CONTROL.
5. Press x or • to display the Enter PIN Code screen.
ADV/
PIP CH
Menu
6. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, choose a
four-digit number to be your PIN code. After entering the code,
the V-Chip Control menu appears.
ENTER
FAV
FAV
Enter
Exit
ADV/
PIP CH
7. Press y or z to highlight ENABLE BLOCKING.
8. Press x or • to highlight “Y,” which enables all blocking by
activating the V-Chip.
(Note: Highlight “N” to deactivate the V-Chip and disable
blocking.)
9. Press y or z to highlight BLOCK CHANNEL.
10. Press x or • to display the BLOCK CHANNEL menu.
SET/CLEAR will be highlighted.
11. Press x or • to highlight SET.
12. Press z to add the current channel to the list.
13. Press ENTER.
Note:
After programming CHANNEL BLOCK,
change channels before turning off the
television.
PICTURE AUDIO
SETUP PREFER C.CAPT
BLOCK CHANNEL
[SET]CLEAR
0
0
0
6
[
]
[
CLEAR
]
SELECT
END[EXIT]
14. Press EXIT.
15. Repeat steps 1–14 to block additional channels.
To unblock all blocked channels:
Note: This will unblock every channel you have blocked. You cannot
unblock individual channels.
1. Press MENU.
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight V-CHIP CONTROL.
4. Press x or • to display the Enter PIN Code screen.
5. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, choose a
four-digit number to be your PIN code. After entering the code,
the V-Chip Control menu appears.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Press y or z to highlight BLOCK CHANNEL.
POWER
TIMER
LIGHT RECALL
MUTE TV/VIDEO
7. Press x or • to display the BLOCK CHANNEL menu.
TV
SET/CLEAR will be highlighted.
CABLE
VCR
8. Press x or • to highlight CLEAR.
9. Press z to clear all blocked channels from the list.
10. Press ENTER.
2
5
8
0
3
6
1
4
CH
11. Press EXIT to return to normal TV viewing.
Channel
Number
9
7
VOL
CH RTN
Video Lock
ENT
100
ADV/
PIP CH
You can use the Video Lock feature to block the input sources
Menu
(Video 1, Video 2, Video 3, and ColorStream) and channels 3 and 4.
Note: The Video Lock feature is independent of the Enable Blocking
option of V-Chip control.
ENTER
FAV
FAV
Enter
Exit
The Video Lock options are:
ADV/
PIP CH
Video: Blocks Video 1, Video 2, Video 3, and ColorStream.
Video+: Blocks Video 1, Video 2, Video 3, ColorStream, and
channels 3 and 4.
Note:
Off:
Disables the Video Lock feature.
In normal TV viewing, if you cannot access the
input sources (Video 1, Video 2, Video 3, and
ColorStream) or channels 3 and 4, check the
Video Lock setting and highlight OFF if
necessary.
To set up video lock:
1. Press MENU.
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight V-CHIP CONTROL.
4. Press x or • to display the Enter PIN Code screen.
5. Use the Channel Number buttons (0–9) to enter your PIN code.
If you are accessing the V-Chip menu for the first time, choose a
four-digit number to be your PIN code. After entering the code,
the V-Chip Control menu appears.
6. Press y or z to highlight VIDEO LOCK.
7. Press x or • to select the desired level of video locking (Video,
Video+, or Off).
PICTURE AUDIO
SETUP PREFER C.CAPT
ENABLE BLOCKING [Y]N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
VIDEO LOCK VIDEO VIDEO+[OFF]
[
MOVE
]
[
SELECT
]
8. Press EXIT to return to normal TV viewing.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Channel labels
A channel label displays on the screen above the channel number
every time you turn the TV on, change the channel, or press
RECALL. You can choose up to four characters for a channel label.
POWER
TIMER
LIGHT RECALL
MUTE TV/VIDEO
TV
CABLE
VCR
To create a channel label:
2
5
8
0
3
6
1
4
CH
1. Tune the TV to the channel you want to label.
2. Press MENU.
Channel
Number
9
7
3. Press x or • to highlight the SET UP menu.
4. Press y or z to highlight CH LABEL.
VOL
CH RTN
ENT
100
ADV/
PIP CH
Menu
PICTURE AUDIO
SETUP PREFER C.CAPT
ENTER
FAV
MORE
FAV
V-CHIP CONTROL
FAVORITE CH
CH LABEL
Enter
Exit
VIDEO LABEL
TIMER:
DEMO:
0 MIN
[START]STOP
ADV/
PIP CH
[
START
]
[
MOVE
]
5. Press x or • to display the CH LABEL menu. SET/CLEAR will
be highlighted.
6. Press x or • to highlight SET.
7. Press z to highlight LABEL.
PICTURE AUDIO
SETUP PREFER C.CAPT
PICTURE AUDIO
SETUP PREFER C.CAPT
CH LABEL
SET/CLEAR
LABEL
CH LABEL
SET/CLEAR
LABEL
[SET]CLEAR
----
[SET]CLEAR
Z---
SET UP MENU
SET UP MENU
[
MOVE
]
[
]
[
MOVE
]
[
SELECT
]
SELECT
8. Press x or • repeatedly to scan through the list of available
characters until the desired character appears in the first space.
9. Press ENTER.
10. Repeat steps 8 and 9 to enter the rest of the characters.
Note: For a blank space in the label name, you need to choose an
empty space from the list of characters; otherwise, a dash will
appear in the space.
11. Press EXIT to return to normal TV viewing.
12. Repeat steps 1–11 for other channels. You can assign labels to a
maximum of 32 channels.
To erase a channel label:
1. Select the channel whose label you want to erase.
2. Press MENU.
3. Press x or • to highlight the SET UP menu.
4. Press y or z to highlight CH LABEL.
5. Press x or • to display the CH LABEL menu. SET/CLEAR will
be highlighted.
6. Press x or • to highlight CLEAR.
7. Press ENTER.
8. Press EXIT to return to normal TV viewing.
9. Repeat steps 1–8 to erase other channel labels.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Video labels
POWER
TIMER
LIGHT RECALL
MUTE TV/VIDEO
The Video Label feature allows you to label each input source for your
TV from the following preset list of labels:
TV
CABLE
VCR
–:
Uses the default label name
VCR: Video cassette recorder
DVD: Digital video disc or digital versatile disc
DTV: Digital TV set-top box
SAT: Satellite box
2
5
8
0
3
6
1
4
CH
Channel
Number
9
7
VOL
CH RTN
ENT
100
CBL: Cable box
ADV/
PIP CH
Menu
To set up video labels:
1. Press MENU.
ENTER
FAV
FAV
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight VIDEO LABEL.
4. Press x or • to display the Video Label screen.
5. Press y or z to highlight the input source to be labeled.
6. Press x or • to select the desired label for that input source.
Enter
Exit
ADV/
PIP CH
PICTURE AUDIO
SETUP PREFER C.CAPT
VIDEO LABEL
VIDEO1
VIDEO2
VIDEO3
– VCR DVD DTV[SAT]CBL
–
–
ColorStream –
SET UP MENU
[
MOVE
]
[
SELECT
]
7. Repeat steps 1–6 to label the other input sources.
8. When you finish setting up video labels:
• To return to the previous menu, press y or z to highlight
SET UP MENU, then press x or •.
• To return to normal TV viewing, press EXIT.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching picture-in-picture (PIP)
POWER
TIMER
LIGHT RECALL
MUTE TV/VIDEO
The picture-in-picture (PIP) feature allows you to watch two pictures
at the same time. The small picture can come from a TV broadcast or
an external source, such as a VCR.
TV
CABLE
VCR
(Note: ColorStream cannot be accessed in PIP mode.)
2
5
8
0
3
6
1
4
Channel
CH
To display a TV broadcast as a small picture:
1. Tune the TV to the program you want to watch.
9
7
VOL
CH RTN
2. Press the PIP button once to display a small picture. A window
1/9 the size of the screen will appear. Press PIP a second time to
display a 1/16-size window.
ENT
100
ADV/
PIP CH
MENU
.CAPT
C
1/16
1/9
FAV
FAV
ENTER
PIP Channel
RESET
EXIT
ADV/
PIP CH
PIP
7
STOP SOURCE
PLAY PIP
PIP
Source
REC TV/VCR REW
FF
3. Press PIP Channel y or z to choose the program you want to
STILL LOCATE SWAP
Swap
Locate
Still
display as a small picture.
To display a picture from an external source as a small picture:
1. Make sure you have connected the external source equipment
properly. For more information, see “Connecting your TV” on
page 2.
Note:
PIP cannot be turned on when the
ColorStream input is being viewed.
2. Turn on the TV and select the program you want to watch.
3. Press the PIP button once to display a small picture. A window
1/9 the size of the screen will appear. Press PIP a second time to
display a 1/16-size window.
You cannot display the signal sources input
through the ANT-2 terminal as a small picture.
4. Press SOURCE to select the input source (TV, VIDEO 1,
VIDEO 2, or VIDEO 3) for the small picture. The selected
source will be displayed in purple.
PIP
TV
VIDEO1
VIDEO2
VIDEO3
TO SELECT PUSH SOURCE
To turn PIP off:
Press PIP two or threee times, depending on the size of the small
picture screen you selected.
Switching the main and small pictures
With the TV in PIP mode, press SWAP to switch the main and small
pictures. The main and small pictures switch every time you press the
SWAP button.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the position of the small picture
POWER
TIMER
LIGHT RECALL
MUTE TV/VIDEO
With the TV in PIP mode, press LOCATE to change the display
position of the small picture. Every time you press LOCATE, the
small picture display changes position in a counter-clockwise manner.
TV
CABLE
VCR
2
5
8
0
3
6
1
4
Channel
CH
9
7
VOL
CH RTN
ENT
100
ADV/
PIP CH
MENU
.CAPT
C
FAV
FAV
ENTER
Freezing the small picture
PIP Channel
With the TV in PIP mode, press STILL to freeze the small picture.
The small picture becomes a still picture (outlined in red in the on-
screen display). Press STILL again to return to the moving picture
(outlined in green in the on-screen display).
RESET
EXIT
ADV/
PIP CH
STOP SOURCE
PLAY PIP
PIP
Source
REC TV/VCR REW
FF
STILL LOCATE SWAP
Swap
Locate
Still
Still
Watching multi-window PIP
Multi-window PIP appears as six small boxes across the bottom of the
screen. Multi-window PIP cannot be viewed unless channels are
programmed into the TV’s memory (see “Adding channels to the TV’s
memory” on page 12).
Note:
Multi-window PIP shows channels
programmed for the signal source you are
currently viewing (ANT-1 or Cable).
Note: The LOCATE, SWAP, PIP CH yz, SOURCE, and STILL
buttons do not work in Multi-window PIP mode.
To view multi-window PIP:
Press PIP three times.
The TV cycles through the programmed channels and shows a few
seconds of each channel’s programming, then freezes the image and
moves on to the next channel in a continuous cycle. The channel
number appears above each small PIP window.
14
23
27
30
43
56
To turn multi-window PIP off:
Press PIP again or change the channel.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the picture
Adjusting the picture quality
MENU TV/VIDEO
VOLUME
CHANNEL
You can adjust the picture quality to your personal preferences,
including the contrast, brightness, sharpness, color, and tint. Your
picture quality adjustments are stored automatically in the TV’s
memory. You can keep these settings or choose preset options under
the PREFERENCES menu. (See “Selecting the color temperature”
below, and “Adjusting the picture preference” on the following page.)
Menu
TV/Video
To adjust the picture quality:
POWER
LIGHT RECALL
1. Press MENU.
TV
2. Press x or • to highlight the PICTURE menu.
3. Press y or z until the quality you want to adjust is highlighted.
MUTE TV/VIDEO
TIMER
CABLE
VCR
2
5
8
0
3
6
1
4
CH
PICTURE AUDIO
SETUP PREFER C.CAPT
CONTRAST
–
9
7
BRIGHTNESS–
SHARPNESS –
VOL
CH RTN
COLOR
TINT
–
–
ENT
100
RESET
ADV/
PIP CH
[
]
[
ADJUST
]
MOVE
MENU
Menu
.CAPT
C
4. Press x or • to adjust the level.
ENTER
FAV
FAV
Selection
Pressing
Exit
Reset
RESET
Contrast
Brightness
Sharpness
Color
Lower
Darker
Softer
Paler
Higher
EXIT
ADV/
PIP CH
Lighter
Sharper
Deeper
Greenish
Note:
Tint
Reddish
To reset the picture adjustments to the factory
settings, select RESET from the PICTURE
menu.
Selecting the color temperature
You can change the quality of the picture by selecting from three
preset color temperatures: cool, medium, and warm.
Mode
Picture Quality
Cool
Medium
Warm
Blueish
Neutral
Reddish
To select the color temperature:
1. Press MENU.
2. Press x or • to highlight the Preferences (“PREFER”) menu.
3. Press y or z to highlight COLOR TEMPERATURE.
4. Press x or • to highlight the mode you prefer.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the picture preference
MENU TV/VIDEO
VOLUME
CHANNEL
You can select your desired picture type from four picture modes:
Sports, Standard, Movie, and Memory, as described in the following
table:
Menu
Mode
Picture Quality
TV/Video
Sports
Bright and dynamic picture (factory-set)
Standard picture quality (factory-set)
Standard
Movie
POWER
Movie-like picture setting (factory-set)
Your personal preferences (set by you; see
“Adjusting the picture quality” on page 26.)
LIGHT RECALL
MUTE TV/VIDEO
Memory
TV
Recall
TIMER
CABLE
VCR
TV/Video
To select your picture preference:
2
5
8
0
3
6
1
4
1. Press MENU.
CH
2. Press x or • to highlight the Preferences (“PREFER”) menu.
3. Press y or z to highlight PICTURE PREFERENCES.
4. Press x or • to highlight the mode you prefer.
9
7
VOL
CH RTN
ENT
100
ADV/
PIP CH
Watching video input
Press the TV/VIDEO button on the remote control or TV to view a
signal coming from other devices connected to your TV, such as a
VCR or video disc player (see “Connecting your TV” on page 2).
FAV
FAV
ENTER
ADV/
Displaying on-screen information
PIP CH
Press RECALL to display the following on-screen information:
• Antenna mode (when in TV mode)
• Channel number or video mode
• Channel label (if set)
• Audio status (stereo or SAP)
• Rating of current program (if rated)
Setting the off-timer
POWER
TIMER
LIGHT RECALL
You can set the off-timer to turn the TV off automatically.
TV
POWER
Timer
MUTE TV/VIDEO
To set the off-timer:
CABLE
VCR
1. Press TIMER.
2. Press • to increase and x to decrease the off time in 10-minute
2
5
8
0
3
6
1
4
CH
increments to a maximum of 180.
3. Press EXIT to exit the menu and return to normal TV viewing.
Channel
Number
9
7
To cancel the off-timer:
VOL
CH RTN
ENT
100
Set the off-timer to 0 (zero) minutes, or turn the TV off and then
on again.
ADV/
PIP CH
Menu
Exit
Auto power off
ENTER
FAV
FAV
The TV turns itself off automatically after approximately 15 minutes if
it is tuned to a vacant channel or a station that stops broadcasting for
the day.
ADV/
PIP CH
Note: This feature does not work in Video mode.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the closed caption feature
The Closed Caption feature has two options:
POWER
TIMER
• Captions—An on-screen display of the dialogue, narration, and
sound effects of programs and videos that are closed-captioned
(usually identified in your local TV listing as “CC”).
LIGHT RECALL
MUTE TV/VIDEO
TV
CABLE
VCR
• Text—An on-screen display of information not related to the
program, such as weather or stock data (if available in your
viewing area).
2
5
8
0
3
6
1
4
CH
To view captions or text:
1. Tune the TV to the desired program or video.
2. Press MENU.
9
7
VOL
CH RTN
ENT
100
3. Press x or • to highlight the C.CAPT menu.
4. Press y or z to highlight CC.
Closed
ADV/
PIP CH
MENU
Captioning
C.CAPT
Menu
ENTER
FAV
FAV
PICTURE AUDIO
SETUP PREFER C.CAPT
RESET
CC:
C1 C2 C3 C4 T1
T2 T3 T4 OFF
EXIT
ADV/
PIP CH
[
SELECT
]
[
MOVE
]
Note:
5. Press x or • to select the desired Closed Caption mode, as
A closed caption signal may not display in the
following situations:
follows:
• To view captions, select C1, C2, C3, or C4 (C1 displays
translation of the primary language in your area). Note: If the
program or video you selected is not closed-captioned, no
captions will display on the screen.
•
•
•
When a videotape has been dubbed
When the signal reception is weak
When the signal reception is non-
standard
The top of the mountain is covered
with snow all the year round.
• To view text, select T1, T2, T3, or T4. Note: If text is not
available in your viewing area, a black rectangle may appear on
your screen. If this occurs, turn the Closed Caption feature off.
WORLD WEATHER
Temps
F
Current
Weather
Clear
C
LONDON
MOSCOW
PARIS
51
11
14
12
19
18
57
Cloudy
Clear
53
ROME
Cloudy
Rain
66
TOKYO
65
• To turn the Closed Caption feature off, highlight OFF in the
Closed Caption menu.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound
POWER
TIMER
LIGHT RECALL
MUTE TV/VIDEO
Muting the sound
TV
CABLE
VCR
Press MUTE to temporarily turn the sound off. While the sound is off,
the screen displays the word MUTE in the lower right corner. To
restore the sound, press MUTE or VOL y z.
2
5
8
0
3
6
1
4
CH
When you press the MUTE button, the Closed Caption feature is
automatically activated. To deactivate captions, press the MUTE
button again. This feature works only when the Closed Caption mode
is set to OFF. See “Using the closed captioned feature” on page 28 for
more information about closed caption settings.
9
7
VOL
CH RTN
ENT
100
ADV/
PIP CH
Selecting stereo/ SAP broadcasts
Menu
Exit
Use the multi-channel TV sound (MTS) feature to listen to high-
fidelity stereo sound while watching TV. MTS also can transmit a
second audio program (SAP) containing a second language or other
audio information. Note: The MTS feature is not available in Video
mode.
ENTER
FAV
FAV
ADV/
PIP CH
In general, you can leave your TV in Stereo mode because the TV
automatically outputs either stereo or monaural (“mono”) sound,
depending on the broadcast type. If the stereo sound is noisy, select
MONO to reduce the noise.
When the TV receives a stereo or SAP broadcast, the word “STEREO”
or “SAP” displays on the screen every time you turn the TV on,
change the channel, or press RECALL.
To listen to stereo sound:
1. Press MENU.
2. Press x or • to highlight the AUDIO menu.
3. Press y or z to highlight MTS.
4. Press x or • to highlight STR (stereo). The STR and SAP menu
items display in yellow when the TV receives the signal (if
available), and in purple when the feature is selected.
PICTURE AUDIO
SETUP PREFER C.CAPT
MTS:
[STR]SAP MONO
BASS
TREBLE
BALANCE
–
–
–
+
+
+
POWER
TIMER
LIGHT RECALL
SURROUND: [ON]OFF
SBS: [ON]OFF
SBS LEVEL –
+
TV
Recall
MUTE TV/VIDEO
CABLE
VCR
[
]
[
SELECT
]
MOVE
Mute
2
5
8
0
3
6
1
4
To listen to a second audio program:
1. Press MENU.
CH
2. Press x or • to highlight the AUDIO menu.
3. Press y or z to highlight MTS.
9
7
Volume
VOL
CH RTN
ENT
100
4. Press x or • to highlight SAP. The TV speakers will output only
ADV/
PIP CH
the second audio program.
ENTER
FAV
FAV
ADV/
PIP CH
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the sound quality
MENU TV/VIDEO
VOLUME
CHANNEL
You can change the sound quality of your TV by adjusting the bass,
treble, and balance.
To adjust the sound quality:
Menu
1. Press MENU.
2. Press x or • to highlight the AUDIO menu.
3. Press y or z to highlight the quality you want to adjust.
4. Press x or • to adjust the level:
POWER
LIGHT RECALL
• x makes the sound quality weaker or decreases the balance in
the right channel, depending on the item selected.
TV
MUTE TV/VIDEO
TIMER
CABLE
VCR
• • makes the sound quality stronger or decreases the balance in
the left channel, depending on the item selected.
2
5
8
0
3
6
1
4
CH
PICTURE AUDIO
SETUP PREFER C.CAPT
9
7
VOL
CH RTN
ENT
100
MTS:
[STR]SAP MONO
BASS
TREBLE
BALANCE
–
–
–
+
+
+
ADV/
PIP CH
MENU
Menu
SURROUND: [ON]OFF
SBS: [ON]OFF
SBS LEVEL –
.CAPT
C
+
[
MOVE
]
[
]
ADJUST
ENTER
FAV
FAV
Using the surround sound feature
RESET
EXIT
The surround sound feature expands the audio listening field wider and
deeper to create exceptional sound quality from the TV speakers.
This feature uses stereo signals from a TV broadcast or video input.
ADV/
PIP CH
To turn the surround sound feature on:
1. If you have not already done so, select Stereo mode (see “Select-
ing stereo/SAP broadcasts” on the previous page).
Note:
To reset the audio adjustments to the
factory settings, select RESET from the
PICTURE menu.
2. Press MENU.
3. Press x or • to highlight the AUDIO menu.
4. Press y or z to highlight SURROUND.
5. Press x or • to highlight ON.
PICTURE AUDIO
SETUP PREFER C.CAPT
MTS:
[STR]SAP MONO
BASS
TREBLE
BALANCE
–
–
–
+
+
+
SURROUND: [ON]OFF
SBS: [ON]OFF
SBS LEVEL –
+
MOVE[
] SELECT[
]
To turn the surround sound feature off:
Highlight OFF in step 5 above. Note: In general, you can leave the
surround sound feature on because it automatically outputs surround
stereo or monaural sound, depending on the broadcast or video type.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the sub-bass system (SBS)
MENU TV/VIDEO
VOLUME
CHANNEL
The sub-base system (SBS) allows you to enhance bass performance,
even when the volume is low.
To turn the sub-bass system on [or off]:
1. Press MENU.
Menu
2. Press x or • to highlight the AUDIO menu.
3. Press y or z to highlight SBS.
4. Press x or • to highlight ON [or OFF].
POWER
LIGHT RECALL
TV
MUTE TV/VIDEO
TIMER
CABLE
VCR
PICTURE AUDIO
SETUP PREFER C.CAPT
MTS:
[STR]SAP MONO
BASS
TREBLE
BALANCE
SURROUND: [ON]OFF
SBS: [ON]OFF
SBS LEVEL –
–
–
–
+
+
+
2
5
8
0
3
6
1
4
CH
+
[
MOVE
]
[
SELECT
]
9
7
VOL
CH RTN
ENT
100
To adjust the sub-bass system:
ADV/
PIP CH
MENU
Menu
1. Turn the sub-bass system on, as instructed above.
2. Press MENU.
.CAPT
C
ENTER
FAV
FAV
3. Press x or • to highlight the AUDIO menu.
4. Press y or z to highlight SBS LEVEL.
5. Press x or • to adjust the SBS level.
RESET
EXIT
ADV/
PIP CH
PICTURE AUDIO
SETUP PREFER C.CAPT
MTS:
[STR]SAP MONO
BASS
TREBLE
BALANCE
–
–
–
+
+
+
SURROUND: [ON]OFF
SBS: [ON]OFF
SBS LEVEL –
+
[
MOVE
]
[
ADJUST
]
Viewing the demonstration (DEMO) mode
POWER
TIMER
LIGHT RECALL
POWER
Recall
The demonstration (DEMO) mode is an option available on the
SET UP menu that will demonstrate several features of your TV.
TV
MUTE TV/VIDEO
CABLE
VCR
To start the demonstration mode:
1. Press MENU.
2
5
8
0
3
6
1
4
CH
2. Press x or • to highlight the SET UP menu.
3. Press y or z to highlight DEMO.
4. Press x or • to start the demo.
To stop the demonstration mode:
Press RECALL, EXIT, or POWER.
9
7
VOL
CH RTN
ENT
100
ADV/
PIP CH
Understanding the last mode memory feature
FAV
FAV
ENTER
If the power is cut off while you are viewing the TV, the Last Mode
Memory feature turns the TV on automatically when the power is
resupplied.
ADV/
Exit
PIP CH
If the power is going to be off for a long time and you are going to be
away from your TV, unplug the power cord to prevent the TV from
turning on in your absence.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Cleaning and care
WARNING: TV sets use high voltage. Do not remove the cabinet back.
Refer all servicing to qualified service technicians.
To clean the TV screen and cabinet:
1. Unplug the power cord to avoid possible shock hazard.
2. Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm water
to clean the TV screen and trim. Do not use too much water; liquid spilling into the cabinet can damage
the TV.
3. Wipe off excess moisture with a clean dry cloth.
4. Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.
Caution:
Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.
These chemicals can damage the cabinet’s finish.
Troubleshooting
Before calling a service technician, please check the following table for possible causes of the problem and
some solutions.
Problem
Solution
TV will not turn on
• Make sure the power cord is plugged in, then press POWER.
• The remote control batteries may be dead. Replace the batteries or
press the POWER button on the TV.
No picture, no sound
No sound, picture OK
• Check the antenna/cable connections.
• The sound may be muted. Press MUTE or VOL y z.
• The station may have broadcast difficulties. Try another channel.
Poor sound, picture OK
Poor picture, sound OK
• The station may have broadcast difficulties. Try another channel.
• Check the antenna connections.
• The station may have broadcast difficulties. Try another channel.
• Adjust the PICTURE menu.
Poor reception of broadcast channels
• The station may have broadcast difficulties. Try another channel.
• Check the antenna connections.
• If you are using a VCR, make sure the TV/VCR button is set
correctly.
Cannot receive above channel 13
Unable to select a certain channel
• Make sure TV/CABLE is set to TV mode.
• The channel may be locked out with the channel lock feature, or
erased with the add/erase feature.
Multiple images
• The station may have broadcast difficulties. Try another channel.
• Use a highly directional outdoor antenna.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Poor color or no color
• The station may have broadcast difficulties. Try another channel.
• Adjust the TINT and/or COLOR in the PICTURE menu.
• If you change the direction of the TV while it is turned on, the
picture could suffer from color shading. If so, turn the TV off and
allow it to cool down for several hours before turning it on again.
No stereo or SAP sound from a
known MTS broadcast
• Make sure the MTS feature is set properly.
The remote control does not operate
• Check that the TV/CABLE/VCR switch is properly set.
• There may be an obstruction between the remote control and the
remote control sensor.
• The remote control batteries may be dead. Replace the batteries.
The V-Chip PIN code does not work
• Change or reset your PIN code.
Specifications
Television system
Channel coverage
NTSC standard
VHF:
UHF:
2 through 13
14 through 69
Cable TV: Mid band (A-8 through A-1, A through 1)
Super band (J through W)
Hyper band (AA through ZZ, AAA, BBB)
Ultra band (65 through 94, 100 through 125)
120 AC, 60 Hz
Power source
Power consumption
Audio power
32AX60: 105 W; 36AX60: 105 W
5 W + 5 W
Speaker type
2-3/8 x 4-3/4 inches (60 x 120 mm)
S-VIDEO INPUT
Video/Audio terminals
Y-INPUT: 1 V (p-p), 75 ohm, negative sync.
C-INPUT: 0.286 V (p-p) (burst signal), 75 ohm
VIDEO/AUDIO INPUT
VIDEO: 1 V (p-p), 75 ohm, negative sync.
AUDIO: 150 mV (rms) (30% modulation equivalent, 47 k ohm)
VIDEO/AUDIO OUTPUT
VIDEO: 1 V (p-p), 75 ohm, negative sync.
AUDIO: 150 mV (rms) (30% modulation equivalent, 47 k ohm)
Dimensions
32AX60:
36AX60:
Width: 30-5/8 inches (778 mm)
Height: 27-5/16 inches (694 mm)
Depth: 22-11/16 inches (576 mm)
34-9/16 inches (878 mm)
30-1/2 inches (775 mm)
25-3/4 inches (654 mm)
Weight
32AX60: 123 lbs. (55.8 kg); 36AX60: 158 lbs. (71.7 kg)
Remote control with two size “AA” batteries
Supplied accessories
Optional TV stand
32AX60: ST-3230; 36AX60: ST-3615, ST-3640
Design and specifications are subject to change without notice.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited United States warranty
Toshiba America Consumer Products, Inc. (“TACP”) and Toshiba Hawaii Inc. (“THI”) make the following
limited warranties. These limited warranties extend to the original consumer purchaser or any person receiving
this set as a gift from the original consumer purchaser and to no other purchaser or transferee.
Limited one-year warranty
TACP and THI warrant this product and its parts against defects in materials or workmanship for a period of
one (1) year after the date of original retail purchase. During this period, TACP and THI will repair or replace a
defective part, at their option, with a new or refurbished part, at no cost to you. Authorized TACP/THI service
station personnel will come to your home when warranty service is required. Depending on the type of repair
required, either the service will be performed in your home or the set will be taken to the authorized TACP/THI
service station for repair and returned to your home at no cost to you.
Limited two-year warranty of picture tube
TACP and THI further warrant the picture tube in this product against defects in materials or workmanship for
a period of two (2) years after the date of original retail purchase. During this period, TACP and THI will repair
or replace a defective picture tube at their option, with a new or refurbished picture tube, at no cost to you,
except that, if a defective picture tube is replaced after one (1) year from the date of the original retail purchase,
you pay labor charges involved in the replacement.
Rental units
The warranty for rental units begins with the first rental or thirty (30) days from the date of shipment to the
rental firm, whichever comes first.
Commercial units
Products sold and used for commercial use have a limited ninety (90) day warranty for the picture tube and all
parts and labor.
Owner’s manual and registration card
You should read this owner’s manual thoroughly before operating this product. Complete and mail the enclosed
registration card within ten days after you, or the person who has given you this product as a gift, purchased this
product. This is one way to enable TACP/THI to provide you with better customer service and improved
products. Failure to return the registration card will not affect your rights under this warranty.
Your responsibility
The above warranties are subject to the following conditions:
• You must retain your bill of sale or provide other proof of purchase.
• All warranty servicing of this product must be made by an Authorized TACP/THI Service Station.
• These warranties are effective only if the product is purchased and operated in the U.S.A. or Puerto Rico.
• Labor service charges for set installation, setup, adjustment of customer controls, and installation or repair of
antenna systems are not covered by this warranty. Reception problems caused by inadequate antenna systems
are your responsibility.
• Warranties extend only to defects in materials or workmanship as limited above, and do not extend to any
product or parts that have been lost or discarded by you; to damage to products or parts caused by misuse,
accident, Acts of God (such as lightning), fluctuations in electric power, improper installation, improper
maintenance, or use in violation of instructions furnished by us; or to units that have been modified or had
the serial number removed, altered, defaced, or rendered illegible.
How to obtain warranty service
If, after following all operating instructions in this manual and checking the section “Troubleshooting,” you find
a that service is needed because of a defective product or part, call the TACP toll-free number 1-800-631-3811
to locate the nearest Toshiba Authorized Service Station. Please present your bill of sale or other proof to the
authorized service personnel.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
In the Continental U.S.
If your TV requires service, call toll free:
1-800-631-3811
Toll Free
1-800-631-3811
In Hawaii
If your TV requires service, call:
(808) 591-8377
327 Kamakee Street, Honolulu, HI 96814
Limitations
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particu-
lar purpose, are expressly limited to the duration of the limited warranties set forth above. With the exception of
any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in lieu of all other
warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or
replacement of any parts. In no event shall TACP or THI be liable for consequential or incidental damages.
No person, agent, distributor, dealer, or company is authorized to change, modify, or extend the terms of these
warranties in any manner whatsoever. The time within which action must be commenced to enforce any obliga-
tion of TACP or THI arising under this warranty or under any statute or law of the United States or any state
thereof is hereby limited to 90 days from the date you discover or should have discovered the defect. This
limitation does not apply to implied warranties arising under state law.
This warranty gives you specific legal rights. You also may have other rights, which may vary from state to state.
Some states do not allow limitation on how long an implied warranty lasts, when an action may be brought, or
the exclusion or limitation of incidental or consequential damages, so the above provisions may not apply to you.
Attention Canadian customers
Canadian consumers are requested to complete the special Canadian “Warranty Registration
Form” enclosed, and forward this completed form with a copy of the bill of sale to
TOSHIBA OF CANADA to “Register and Validate” their warranty.
Products purchased in the U.S.A. and used in Canada are not covered by these warranties.
Products purchased in Canada and used in the U.S.A. are not covered by these warranties.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
connecting
Index
audio amplifier ................................................................... 6
cable converter box ......................................................... 3
cable converter box and VCR ...................................... 3
camcorder ........................................................................... 6
DVD with ColorStream™ and a VCR ......................... 4
DVD/satellite receiver and VCR ................................. 4
TV ............................................................................................ 2
VCR ........................................................................................ 2
VCRs, two ............................................................................ 5
A
adding and erasing channels manually .....................13
adding channels to the TV’s memory..........................12
adjusting
channel settings ..............................................................13
picture preference ..........................................................27
picture quality ..................................................................26
sound ...................................................................................29
antenna input, selecting ...................................................11
audio amplifier, connecting ............................................... 6
auto power off ......................................................................27
D
demonstration (DEMO) mode, viewing ..................... 31
displaying on-screen information .................................27
DVD with ColorStream and a VCR, connecting ........ 4
DVD/satellite receiver and VCR, connecting ............. 4
B
batteries, installing in the remote control ................... 7
blocking
F
channels .............................................................................20
programs by ratings ...................................................... 17
unrated movies and programs ..................................19
favorite channels, programming ...................................14
freezing the small picture (PIP) .....................................25
L
C
labels
cable converter box and VCR, connecting ................. 3
cable converter box, connecting ..................................... 3
cable TV converter code table ......................................... 9
camcorder, connecting ....................................................... 6
care and cleaning of your TV .........................................32
changing
channel ...............................................................................22
video ....................................................................................23
language, changing the on-screen display ..............11
last mode memory feature, understanding .............. 31
location for TV, selecting .................................................... 1
channels .............................................................................13
on-screen display language .......................................11
position of the small picture (PIP) ...........................25
channel settings, adjusting .............................................13
channels
M
MPAA ratings ........................................................................ 17
multi-window PIP ................................................................25
muting the sound ................................................................29
adding and erasing manually ....................................13
adding to the TV’s memory ........................................12
blocking with V-Chip.....................................................20
changing ............................................................................13
favorite, programming ..................................................14
labels ...................................................................................22
programming automatically .......................................12
switching between two ................................................13
cleaning and care of your TV .........................................32
closed caption feature, using .........................................28
code table
O
off-timer, setting ..................................................................27
on-screen display language, changing ......................11
on-screen information, displaying ................................27
P
picture
adjusting ............................................................................26
color temperature, selecting ......................................26
preference, adjusting ....................................................27
quality, adjusting .............................................................26
cable TV converter ........................................................... 9
VCR ........................................................................................ 8
ColorStream™ DVD and VCR, connecting .................. 4
color temperature, selecting ...........................................26
36
Download from Www.Somanuals.com. All Manuals Search And Download.
picture-in-picture (PIP)
specifications ........................................................................33
stereo sound, selecting .....................................................29
surround sound, using ..................................................... 30
switch, TV/CABLE/VCR ...................................................... 7
switching between two channels .................................13
switching the main and small pictures (PIP) ...........24
changing the position of the small picture ..........25
freezing the small picture ............................................25
main and small pictures, switching .........................24
watching .............................................................................24
watching multi-window ...............................................25
PIN code, selecting .............................................................15
PIP (see “picture-in-picture”)
T
power, auto off......................................................................27
programming
channels automatically ................................................12
favorite channels ............................................................14
remote control for use with a VCR
troubleshooting ....................................................................32
TV
connecting........................................................................... 2
location, selecting ............................................................ 1
ratings .................................................................................17
setting up ...........................................................................11
TV/CABLE/VCR switch ....................................................... 7
TV/VIDEO button on the TV, using ..............................12
or cable TV converter................................................. 8
programs, blocking with V-Chip....................................15
R
V
ratings
blocking programs by ................................................... 17
MPAA .................................................................................. 17
TV .......................................................................................... 17
unrated movies or programs ......................................19
youth TV ............................................................................. 17
remote control
batteries, installing ........................................................... 7
learning about..................................................................10
preparing for use .............................................................. 7
programming for use with a VCR
V-Chip
blocking channels ..........................................................20
blocking programs by ratings .................................... 17
selecting a PIN code .....................................................15
using ....................................................................................15
VCR and cable converter box, connecting ................. 3
VCR and DVD with ColorStream, connecting ............ 4
VCR and DVD/satellite receiver, connecting ............. 4
VCR, connecting .................................................................... 2
VCRs, connecting two ......................................................... 5
video input, watching ........................................................27
video labels ............................................................................23
video lock ...............................................................................21
or cable TV converter................................................. 8
using ...................................................................................... 7
using with a VCR or cable TV converter ................. 7
S
W
SAP, selecting .......................................................................29
satellite receiver/DVD and VCR, connecting ............. 4
signal source, selecting ....................................................12
sound
adjusting ............................................................................29
muting .................................................................................29
stereo/SAP broadcasts, selecting ............................29
sub-bass system (SBS), using .................................. 31
surround, using .............................................................. 30
warranty ................................................................................. 34
watching
multi-window picture-in-picture (PIP)...................25
picture-in-picture (PIP) ................................................24
video input.........................................................................27
Y
youth TV ratings ................................................................... 17
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Toshiba America
Consumer Products, Inc.
Head Office
Factory Service Center
82 Totowa Road
Wayne, NJ 07470
1420B Toshiba Drive
Lebanon, TN 37087
Head Office
Toshiba Hawaii, Inc.
327 Kamakee Street
Honolulu, HI 96814
Toshiba of Canada, Ltd.
Head Office
Service Centers
191 McNabb Street
Markham, Ontario L3R 8H2
Canada
Toronto
191 McNabb Street
Markham, Ontario L3R 8H2
Canada
Tel: (905) 470-5400
Montreal
1643 North Service Road
Trans-Canada Highway
Dorval, Quebec H9P 1J1
Canada
Tel: (514) 856-4100
Vancouver
22171 Fraserwood Way
Richmond, British Columbia V6W 1J5
Tel: (604) 303-2500
Manufactured by:
Toshiba America
Consumer Products, Inc.
PRINTED IN USA
(00-06)B
23563919B
Download from Www.Somanuals.com. All Manuals Search And Download.
|