OWNER'S MANUAL
Color Television
TM
27A40
32A40
36A40
© TOSHIBA CORPORATION, 2000
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Set Up
Basic Operation
Introduction ................................................................... 4
Exploring your new TV ............................................... 4
Installing Your TV ........................................................ 4
Connecting Your TV..................................................... 5
Connecting a VCR ....................................................... 5
Connecting a cable converter box ............................... 5
Watching TV Programs or Video Input ................... 18
Selecting the TV channels ......................................... 18
Selecting the video input source ................................ 18
Convenient Remote Functions ................................... 19
Displaying on-screen information ............................. 19
Muting the Sound ...................................................... 19
Changing quickly between two channels .................. 19
Adjusting the Picture .................................................. 20
Adjusting the picture quality ..................................... 20
Selecting the color temperature...................................... 21
Selecting the picture preference function....................... 21
Adjusting the Sound ................................................... 22
Adjusting the sound quality ....................................... 22
Using the Timer (Sleep Timer) .................................. 23
Setting the timer......................................................... 23
Selecting Stereo/SAP Broadcasts ............................... 24
Listening to stereo sound ........................................... 24
Activating the surround sound effect......................... 24
Listening to second language .................................... 25
Connecting a cable converter box and a VCR .......................
6
Connecting a satellite receiver and a VCR .................. 6
Connecting a DVD with component video
and VCR ................................................................... 7
Connecting two VCRs ................................................. 7
Preparation
Preparing the Remote Control for Use ....................... 8
Installing the Remote Control batteries ....................... 8
Location of Controls ..................................................... 9
Using the Remote with VCR or Cable TV
Converter ................................................................ 10
Programming the Remote Control ............................ 11
Controlling other brands of VCR’s and
cable TV converters ............................................... 11
Menu function (General Instructions) ...................... 14
First-Time Operation.................................................. 15
Turning the TV set on................................................ 15
Selecting the on-screen display language .................. 15
Programming Channel Memory ............................... 16
TV/CABLE function ................................................. 16
CH PROGRAM function........................................... 16
ADD/ERASE function .............................................. 17
Advanced Operation
Programming Your Favorite Channels .................... 26
Programming your favorite channels ........................ 26
Selecting your favorite channels................................ 26
Operating Closed Caption Feature ........................... 27
Viewing captions or text ............................................ 27
Using V-CHIP Control ............................................... 28
Selecting the V-CHIP CONTROL menu .................. 28
Adjusting the V-CHIP CONTROL menu ................. 29
Unblocking programs temporarily............................. 31
BLOCK CHANNEL function ................................... 31
Reference Section
Cleaning and Care ...................................................... 32
Specifications ............................................................... 33
Before Calling Service Personnel .............................. 34
Limited United States Warranty ............................... 35
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
This manual applies to models 27A40, 32A40 and 36A40, and there are slight differences among them.
Check the model of your TV before using this manual.
The 32A40 is the model used for illustration purposes. Illustrations in this manual are based on using the Remote
Control.
Exploring your new TV
You can operate your TV using the buttons on the front panel or the Remote Control.
The back panel provides all the terminal connections you will need to connect other equipment to your TV.
POWER
RECALL
MUTE
o
1
4
3
6
2
5
8
0
POWER
MENU
TV/VIDEO VOLUME
CHANNEL
T
S
t
s
7
9
CH RTN
100
ENT
CH
MENU/
ENTER
VOL
VOL
IN
OUT
ANT
COLOR
STREAM
INPUT
CH
VIDEO
VIDEO
VIDEO
TV
CABLE
VCR
Y
L
L/
MONO
L/
EXIT
MONO
FAV CH
TV/VIDEO
A
S-VIDEO
C
AUDIO
R
AUDIO
R
AUDIO
R
B
R
TV/VCR
PLAY
FF
REC
STOP
SLOW PAUSE REW
C
VIDEO-1 VIDEO-2
Installing Your TV
Where to install
Place the TV on the floor or on a sturdy platform. The
WARNING : TO AVOID PERSONAL INJURY
Do not stand or climb on the TV.
G
G
mounting surface should be flat and steady.
Do not put a VCR or any heavy object on top of the
TV.
Lighting
CAUTION :
Do not place the TV in a room where direct lighting
strikes the screen. Use soft and indirect lighting.
As a safety feature, the plug has one prong wider than
the other. It will fit only one way into a standard
electrical outlet. If the plug will not fit into the outlet,
try turning it around. If the plug will not fit either way,
the outlet is probably old and non-standard.
You will need to have a new outlet installed by an
electrician.
Air circulation
Place the TV far enough from the walls to allow
proper ventilation. This will prevent the TV from
overheating and avoid possible damage to the TV.
Avoid dusty places too.
Wide prong
DO NOT CHANGE
THE SAFETY
FEATURE OF THE
PLUG.
Power supply
Plug into an electrical outlet with standard household
power (120 volt AC, 60Hz). Do not change the plug’s
safety prong. See the right column.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your TV
If you haven’t connected electronic equipment before, or you have been frustrated in the past, you may wish to read this
section. (Cables are not supplied.)
G
A coaxial cable is the standard cable that comes in from your
antenna or cable converter box. Coaxial cables use “F”
connectors.
Antenna Coaxial Cable
AUDIO/VIDEO Cables
G
Audio and video cables are usually color coded according to
use: yellow for video and red and white for audio. The red
audio cable is for the stereo right channel, and the white audio
cable is for the stereo (or mono) left channel. If you look at
the rear panel of the TV, you will see that the terminals are
color coded in the same manner as the cables.
S-Video Cable
G
G
S-video cables provide better picture performance. S-video
cables can only be used with S-video compatible components.
ColorStream™ cables come in sets of three and provide the
best picture performance. ColorStream cables can only be
used with ColorStream compatible components.
ColorStream Cable
Caution:
Do not plug the TV in until you have finished
connecting all of your equipment.
Connecting a VCR
This connection allows you to watch local channels and video
programs, play or record on the VCR while watching TV, and to
record from one channel while watching another channel.
Cable lead-in or
antenna
Stereo VCR
S-VIDEO
VIDEO
OUT
Caution:
L
R
IN
IN from ANT OUT to TV
CH3
IfusingamonoVCR,connectL/MonotoVCR
AudioOUTusingonlyoneaudiocable.
IfyouhaveaS-VHSVCR,usetheS-video
connectionsandremovethevideocable.
DonotconnectthevideocableandtheS-video
cabletoVIDEO1simultaneously.
OUT
CH4
TV
IN
OUT
ANT
COLOR
STREAM
INPUT
VIDEO
VIDEO
VIDEO
Y
L
L/
L/
MONO
MONO
Note:
OR
S-V
AUDIO
TheVIDEO2jackscanalsobeusedforconnect-
ingasecondpieceofvideoequipment,suchasa
videodiscplayerorcamcorderetc.withaudio/
videooutputs.
C
AUDIO
R
AUDIO
R
B
R
R
C
VIDEO-1 VIDEO-2
Connecting a cable converter box
This connection allows you to watch cable and premium channels.
Tune the TV to channel 3 or 4 (whichever channel is vacant in your
broadcast area), then use the converter box to change channels.
From cable
TV
Note:
IN
OUT
IN
OUT
ANT
COLOR
STREAM
INPUT
VIDEO
When you use a converter box with your TV,
there may be features that you cannnot
program using the Remote Control, such as
blocking channels, and programming your
favorite channels.
VIDEO
VIDEO
Y
L
L/
L/
MONO
MONO
Cable converter
box
S-VIDEO
C
C
AUDIO
R
AUDIO
R
AUDIO
R
B
R
VIDEO-1 VIDEO-2
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting Your TV (continued)
Connecting a cable converter box and a VCR
This connection allows you to watch and record basic and premium cable channels, as well as watch video tapes. Tune the TV
and VCR channels to 3 or 4 (whichever channel is vacant in your broadcast area), then use the converter box to change chan-
nels.
From Cable
Stereo VCR
S-VIDEO
VIDEO
AUDIO
IN
OUT
L
R
IN
IN from ANT OUT to TV
CH3
OUT
CH4
Cable converter box
Caution:
TV
G
If you have a mono VCR, connect L/Mono to VCR Audio
OUT using only one audio cable.
IN
OUT
ANT
COLOR
STREAM
INPUT
VIDEO
VIDEO
VIDEO
If you have a S-VHS VCR, use the S-video connections and
remove the video cable. Do not connect the video cable and
the S-video cable to VIDEO 1 simultaneously.
When you use a converter box with your TV, there may be
features that you cannot program using the remote control,
such as blocking channels, and programming your favorite
channels.
Y
L
L/
L/
MONO
MONO
OR
S-V
AUDIO
C
AUDIO
R
AUDIO
R
B
R
G
R
C
VIDEO-1 VIDEO-2
Connecting a satellite receiver and a VCR
This connection allows you to watch satellite, video and TV programs.
You can record one TV channel while watching another channel.
From Satellite dish
Caution:
G
Satellite Receiver
You can use a video cable instead of the S-video
cable, but the picture quality will decrease.
Do not connect the video cable and the S-video
cable to VIDEO 1 simultaneously.
VIDEO
AUDIO
S-VIDEO
OUT
Satellite IN
L
R
OUT
Notes:
TV
G
To watch from the Satellite Receiver, the TV
IN
OUT
ANT
COLOR
STREAM
INPUT
must select VIDEO 1.
To watch from the VCR, the TV must select
VIDEO 2.
VIDEO
VIDEO
VIDEO
G
Y
L/
MONO
L/
MONO
S-
C
AUDIO
R
AO
R
AUDIO
R
B
R
C
VIDEO-1 VIDEO-2
Stereo
VCR
S-VIDEO
VIO
UDI
OUT
IN from ANT OUT to TV
CH3
IN
CH4
From antenna
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD with component video and VCR
This connection allows you to watch DVD, video or TV programs and to record TV programs. Your TV is capable of using
ColorStream (component video). Connecting your TV to a ColorStream compatible DVD can greatly enhance picture quality
and performance.
From Antenna
Stereo VCR
S-VIDEO
VIDEO
AUDIO
L
R
IN
Caution:
IN from ANT OUT to TV
CH3
The unauthorized recording of television pro-
grams, video tapes and other materials may
infringe upon the provisions of copyright laws.
OUT
CH4
TV
IN
OUT
ANT
COLOR
STREAM
INPUT
VIDEO
VIDEO
VIDEO
Notes:
Y
L
L/
MONO
L/
G
To watch from the VCR, the TV must select
MONO
OR
VIDEO 1.
S-V
AUDIO
C
AUDIO
R
AUDIO
R
B
G
To watch from DVD, the TV must select VIDEO 2.
R
C
R
VIDEO-1 VIDEO-2
DVD
Cr
C
b
Y
1
2
L
L
R
R
VIDEO
VIDEO OUT
S
COMPONENT VIDEO OUT
AUDIO OUT
Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR to another VCR while watching a video program.
You will also be able to record from one TV channel while watching another channel.
From Antenna
VCR1
S-VIDEO
VIDEO
AUDIO
L
R
IN
IN from ANT OUT to TV
CH3
Caution:
OUT
CH4
Theunauthorizedrecordingoftelevisionprograms,
videotapesandothermaterialsmayinfringeuponthe
provisionsofcopyrightlaws.
TV
IN
OUT
ANT
COLOR
STREAM
INPUT
VIDEO
VIDEO
VIDEO
Y
L
L/
MONO
L/
Note:
MONO
OR
S-V
AUDIO
TheTVmustselectVideo1toduboreditfromVCR1
toVCR2. VCR2mustselectLineInwheneditingor
dubbingfromVCR1.
C
AUDIO
R
AUDIO
R
B
R
R
C
VIDEO-1 VIDEO-2
VCR2
VO
UDI
IN
IN from ANT OUT to TV
CH3
OUT
CH4
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparing the Remote Control for Use
With the Remote Control, you can operate your TV, most VCR models, and cable TV converters together, even if they are
different brands. If you will be using your TV with a Toshiba VCR, your Remote Control is already programmed and ready
to use. If you own different brands of VCR's and/or converters, you first have to program your Remote Control.
(See “Programming the Remote Control” on page 11.)
Installing the Remote Control batteries
1 Slide the battery cover off of the back of the Remote Control.
Caution:
G
Dispose of your batteries in a designated
Press and slide to remove.
disposal area. Do not throw your batteries into
a fire.
G
G
Do not mix battery types or combine used
batteries with new ones.
Remove dead batteries immediately to prevent
battery acid from leaking into the battery
compartment.
G
If you do not intend to use the remote control
for a long time, remove the batteries.
2 Install two “AA” size batteries. Match the + and – signs on the batteries to
the signs on the battery compartment.
Note:
This Remote Control’s functions may or may not
operate your VCR or cable TV converter.
Refer to the owner’s manuals supplied with the
equipment to see which features are available. In
addition, the original controllers may have
features not available on this Remote Control. If
you would like to continue to use these features,
you may want to use the original remote control.
3 Slide the battery cover back on to the Remote Control until the lock
snaps.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of Controls
For details on the use of each control, refer to pages in brackets.
TV front panel (represents 32A40)
TV/VIDEO [18]
VOLUME T/S[15]
CHANNEL s/t[18]
POWER
MENU
TV/VIDEO VOLUME
CHANNEL
T
S
t
s
T/S/t/s[14]
POWER [15]
Remote sensor
MENU [14]
POWER indicator
Remote Control
Only the buttons that are used to operate the TV set are described here.
MUTE [19]
POWER
RECALL
MUTE
RECALL [19]
o
POWER [15]
3
6
1
4
2
5
8
0
Channel Number [18]
9
7
CH RTN
100
CH RTN [19]
ENT
MENU [14]
CH
MENU/
ENTER
CHANNEL s/t[18]
VOL
VOL
Menu s/t[14]
VOLUME T/S[15]
Menu T/S[14]
CH
TV
CABLE
VCR
TV/CABLE/VCR[15]
Set to “TV” to control the TV.
EXIT [14]
EXIT
FAV CH
TV/VIDEO
A
TV/VIDEO [18]
FAV CH t/ s[26]
REC TV/VCR STOP
SLOW PAUSE REW
PLAY
FF
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote with VCR or Cable TV Converter
G
To control a TOSHIBA VCR, first set the TV/CABLE/VCR switch to “VCR” position. The buttons shown
below will then control the VCR. The rest of the buttons operate the TV as usual.
If you have another brand of VCR, you can probably program your Remote to control it.
Details are on page 11.
G
To control a cable TV converter, this Remote Control must be programmed to recognize the brand of your
converter. See page 11.
The shaded buttons can be used to control the cable TV converter.
Set the TV/CABLE/VCR switch to “CABLE” position whenever you control the cable TV converter.
Aim at the VCR or cable TV converter
POWER
RECALL
MUTE
o
POWER
Press the button to turn the VCR
(or converter) on.
Press again to turn off.
3
6
1
4
2
5
8
0
Channel Number
Press the numbers desired
for direct access.
9
7
CH RTN
100
ENT
ENTER
Some VCR's and Cable TV
converters require “ENT” to
change channel number.
CH
MENU/
ENTER
VOL
VOL
CHANNEL s/ t
Press sto select next higher channel.
Press tto select next lower channel.
TV/CABLE/VCR
“CABLE”: To control the
cable box
CH
TV
CABLE
VCR
EXIT
STOP
Press to stop the tape.
“VCR”:
To control the VCR
TV/VCR
FAV CH
TV/VIDEO
A
Press to select the TV mode to
view one program while
recording another program.
PLAY
REC TV/VCR STOP
PLAY
Press to begin tape playback.
FF (fast forward)
REC (record)
Press to rapidly advance the tape.
In playback mode, press to view the
picture moving rapidly in forward
direction.
Press to start recording.
SLOW
Press to view a slow-motion
picture in playback mode.
REW (rewind)
PAUSE
Press to rewind the tape.
In playback mode, press to view
picture moving rapidly in
reverse.
Press to freeze the picture during
playback or recording.
Press again to release.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming the Remote Control
G
This Remote Control is preprogrammed to operate TOSHIBA VCR’s.
G
To use VCR’s other than TOSHIBA models (or cable converter), perform the following procedures before
operating.
Controlling other brands of VCR’s and cable TV converters
1 Refer to the “VCR code table” (or “Cable TV converter code
RECALL
POWER
table”) on pages 12 and 13 to find the code number that corresponds to
RECALL
MUTE
the brand name of your VCR (or converter).
o
POWER
3
6
1
4
2
5
8
0
If more than one number is listed, try each one separately until you find
the one that works.
Number
2 Set the TV/CABLE/VCR switch to “VCR” (or “CABLE”).
9
7
CH RTN
3 Hold down RECALL while pressing the Number buttons for the three
100
ENT
digit code number for your brand of VCR (or converter).
CH
4 Point the Remote Control at the VCR (or at the converter) and press
POWER to test the code number.
MENU/
ENTER
VOL
VOL
–If the right number was entered, the VCR (or the converter) should
turn off.
CH
–If the VCR (or the converter) does not respond to the Remote
Control, repeat steps 1 to 4 with another code number.
TV
CABLE
VCR
EXIT
FAV CH
TV/VIDEO
A
For future reference, write down the code numbers you used:
REC TV/VCR STOP
SLOW PAUSE REW
PLAY
FF
VCR CODE
CABLE CODE
Notes:
G
You have to reprogram the Remote Control when you change its batteries.
G
Some newer VCR’s are capable of working on either of two remote codes. These
VCR’s have a switch labeled “VCR1/VCR2”.
If your VCR has this kind of switch, and does not respond to all the code numbers
for your VCR brand name, set the switch to another position (“VCR1” or “VCR2”)
and reprogram the Remote Control.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming the Remote Control (Continued)
G
In some rare cases, you may not be able to operate your non-Toshiba equipment with the supplied Remote
Control. This is because your equipment may use a code that is not provided with this Remote Control. In this
case, please use the equipment’s own remote control.
VCR code table
BRAND NAME
CODE NUMBER
BRAND NAME
CODE NUMBER
BRAND NAME
CODE NUMBER
Adventura ............... 019
Aiko ........................ 297
Aiwa ....................... 019
Akai ........................ 060,068,080,125,
261
American High ....... 054
Asha ........................ 259
Audiovox ................ 056
Beaumark................ 259
Bell & Howell ........ 123
Brandt ..................... 206
Broksonic................ 140,203,230,314,
380
Calix ....................... 056
Canon...................... 054
Capehart.................. 039
Carver ..................... 100
CCE ........................ 091,297
Citizen .................... 056,297
Colt ......................... 091
Craig ....................... 056,066,091,259
Curtis Mathes ......... 054,060,079
Cybernex................. 259
Daewoo ................... 039,064,297
Daytron ................... 039
Dynatech ................. 019
Electrohome............ 056
Electrophonic.......... 056
Emerex.................... 051
Emerson .................. 019,021,056,062,
080,087,140,203,
Radio Shack ............ 019,056,344
Radix ...................... 056
Randex .................... 056
RCA ........................ 061,079,084,096,
124,125,168,221
Jensen ..................... 060
JVC ......................... 027,060,086
Kenwood ................ 057,060,086
KLH ........................ 091
Kodak ..................... 054,056
Lloyd ...................... 019
Lloyd’s.................... 227
Logik ...................... 091
LXI ......................... 056
Magnavox ................... 054,058,100,129,168
Magnin.................... 259
Marantz ................... 054,100
Marta....................... 056
Matsushita .............. 054
MEI ......................... 054
Memorex................. 019,054,056,058,
065,066,067,123,
Realistic .................. 019,054,056,065,
066,067,081,085,
123,259
Ricoh ...................... 053
Runco...................... 058
Samsung ................. 064,259
Sanky ...................... 058,067
Sansui ..................... 060,086
Sanyo ...................... 065,066,123,259
Scott ........................ 062,064,140,203,
229,230,231
Sears ....................... 054,056,061,065,
066,073,085,123,
259
124
MGA ....................... 062,080
MGN Technology... 259
Minolta ................... 061,124
Mitsubishi ............... 062,080,086,094
192,233,261
Motorola ................. 054,067
MTC ....................... 019,259
Multitech ................ 019,091
NAD ....................... 077
NEC ............................ 057,059,060,069,086
Nikko ...................... 056
Noblex .................... 259
Olympus ................. 054
Optimus .................. 056,067,077,123
Optonica ................. 081
Orion ....................... 498
Panasonic .................... 054,096,181,244,473
Penney .................... 054,056,057,059,
061,073,259
Pentax ..................... 061,084,124
Philco ...................... 054
Philips ..................... 054,081,100,129
Pilot ........................ 056
Pioneer .................... 077,086
Portland .................. 039
Protec ...................... 091
Pulsar ...................... 058
Quarter .................... 065
Quarts ..................... 065
Sharp ....................... 067,081
Shintom .................. 091
Shogun .................... 259
Singer...................... 091
Sony ........................ 051,052,053,054
STS ......................... 061
Sylvania .................. 019,054,062,100,
129
Symphonic .............. 019,344
Tatung ..................... 060
Teac ........................ 019,060
Technics.................. 054,181
Teknika ................... 019,054,056,071
Telefunken .............. 206
TMK ....................... 227,259
Toshiba ................... 062,064,085,229,
231,385
Totevision ............... 056,259
Unitech ................... 259
Vector ..................... 064
Vector Research...... 057,059
Video Concepts ...... 059,064,080
Videosonic .............. 259
Wards...................... 019,054,061,066,
067,081,091,168,
227,228,230,231,
297,313,314,380,
498
Fisher ...................... 066,073,085,123
Fuji.......................... 052,054
Funai ....................... 019,344
Garrard.................... 019,344
GE ........................... 054,079,084,221
Goldstar .................. 037,056,057
Gradiente ................ 019
Harley Davidson ..... 019
Harman/Kardon ...... 057,094
Harwood ................. 087,091
Headquarter ............ 065
HI-Q........................ 066
Hitachi .................... 060,061,084,124,
185, 254
231,259
XR-1000 ................. 019,054,091
Yamaha ................... 057
Zenith...................... 052,053,058
Quasar ..................... 054,096
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Cable TV converter code table
BRAND NAME
CODE NUMBER
BRAND NAME
CODE NUMBER
ABC ........................ 020,022,026,027,
030,032,033,036,
Regency .................. 021
Rembrandt .............. 030,089
Runco...................... 019
Samsung ................. 059,163
Scientific Atlanta .... 025,027,036,296
Signal ...................... 034,059
Signature ................. 030
SL Marx .................. 059
Sprucer.................... 040
Standard
066
Antronix.................. 041
Archer ..................... 041,058,172
Belcor ..................... 075
Cable Star ............... 075
Cabletenna .............. 041
Cableview ............... 041
Century ................... 172
Citizen .................... 172
Colour Voice .......... 044,050
Comtronics ............. 059,079
Contec ..................... 038
Dae Ryung .............. 027
Eastern .................... 021
Focus ...................... 419
Garrard.................... 172
GC Electronics........ 075
Gemini .................... 034,089
General
Instrument ........... 030,295
Goldstar .................. 059,163
Hamlin .................... 028,039,053,278,
292
Hitachi .................... 030
Hytex ...................... 026
Jasco ....................... 172
Jerrold ..................... 022,030,031,033
034,066,295
Components ........ 174
Starcom ................... 022,034,066
Stargate ................... 034,059
Starquest ................. 034
Sylvania .................. 020
Teleview ................. 059
Texscan ................... 020
Tocom ..................... 031,032,078
Toshiba ................... 019
Tusa ........................ 034
Unika ...................... 041,172
United Artists.......... 026
United Cable ........... 022
Universal................. 041,058,075,172
Viewstar.................. 046,079,230
Zenith...................... 019
Zentek ..................... 419
Macom .................... 052
Magnavox ............... 046
Memorex................. 019
Movie Time ............ 175
NSC ........................ 089,175
Oak ......................... 026,038,267
Panasonic ................ 019,040,126
Paragon ................... 019
Philips ..................... 044,046,047,048
049,050,172
Pioneer .................... 042,163,552
Popular Mechanics ..... 419
Pulsar ...................... 019
RCA ........................ 040
Recoton ................... 419
Regal ....................... 039,278,292
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Function (General Instructions)
We suggest you familiarize yourself with this procedure before using the Menu function.
To adjust any TV feature, the use of the Menu function is required. The adjustments that can be made to the TV appear on
the screen.
POWER
MENUbutton(onTVandonRemote)
MENU
TV/VIDEO VOLUME
CHANNEL
Each time you press MENU, the Picture 1, Picture 2, Audio, Setup or
T
S
t
s
Option menu on-screen display is selected in order, then press tor s.
Picture 1
MENU
T/S
t/s
CONTRAST
–
–
+
+
+
+
+
BRIGHTNESS
SHARPNESS –
COLOR
TINT
–
–
Picture 2
RESET
COLOR
MOVE[t s] AD
TEMPERATURE:[COOL]MEDIUM WARM
PICTURE
POWER
Audio
RECALL
MUTE
PREFERENCE:
[NORMAL]THEATER
M
o
MTS:
[STR]SAP MONO
–
–
–
+
+
+
BASS
MOVE[t s] SELEC
3
6
1
4
2
TREBLE
Setup
BALANCE
SURROUND
[ON]
5
TIMER:
0 MIN
MOVE[t s] SELEC
TV/CABLE:
CH PROGRAM
ADD/ERASE:
TV[CABLE]
8
9
7
Option
CH RTN
[ADD]ERASE
V-CHIP CONTRO
FAVORITE CH
100
0
ENT
LANGUAGE:[ENGLISH]FRANCAIS
ESPANOL
MOVE[t s] SEL
DEMO:
START[STOP]
C1 C2 C3 C4 T1
T2 T3 T4[OFF]
CH
C.CAPT:
T/S
MENU/
ENTER
VOL
VOL
s/t
MOVE[t s] SELECT[T S
]
CH
MENU
TV
CABLE
VCR
EXIT
EXIT
FAV CH
TV/VIDEO
A
REC TV/VCR STOP
SLOW PAUSE REW
PLAY
FF
M/L buttons (on TV and on Remote)
Use tor safter you have selected the on-screen menu you want to adjust
withtheMENUbutton.
Each time you press tor s, the function to be adjusted will be selected in
order.
tbutton........................ from top to bottom
sbutton........................ from bottom to top
The selected function will be displayed in purple.
Notes:
G
The T/Sbuttons will function as the VOL-
UME T/Sbuttons when no menu display is on
the screen.
T/Sbuttons (on TV and on Remote)
G
Use Tor Sto adjust the function you have selected with the t/sbuttons.
The s/tbuttons will function as the CHAN-
NEL s/tbuttons when no menu display is on
the screen.
EXIT button (on Remote)
The above five menu displays will automatically disappear from the screen
if no control has been operated for about 15 seconds.
If you want to clear the screen of all on-screen menus instantly, press
EXIT.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
First-Time Operation
Turning the TV set on
VOLUME T/S
1 Set the TV/CABLE/VCR switch on the
Remote Control to “TV” position.
POWER
MENU
TV/VIDEO VOLUME
CHANNEL
2 Press POWER to turn on the TV.
T
S
t
s
To turn off the TV, press POWER again.
TV 4
T/S
t/s
MENU
POWER
POWER
3 Press VOLUME T/Sto adjust the volume.
To increase the volume, press S.
To decrease the volume, press T.
POWER
RECALL
MUTE
VOLUME
o
+
–
TO CONTROL PUSH VOL
3
6
1
4
2
5
8
0
Selecting the on-screen display language
9
7
1 Press MENU until the Option menu is
CH RTN
displayed on the screen.
100
LANGUAGE:[ENGLISH]FRANCAIS
ESPANOL
ENT
DEMO:
C.CAPT:
START[STOP]
C1 C2 C3 C4 T1
T2 T3 T4[OFF]
2 Press sor trepeatedly until
s/t
CH
“LANGUAGE” is displayed in purple.
MENU/
ENTER
VOL
VOL
MOVE[t s] SELECT[T S
]
CH
TV
CABLE
VCR
3 Press Tor Suntil your desired language is
displayed in purple.
T/S
VOLUME
T/S
EXIT
LANGUE:
DEMO:
ENGLISH[FRANCAIS]
ESPANOL
If you select “FRANCAIS” for example, the
display language changes to French.
MARCHE[ARRET]
FAV CH
TV/VIDEO
A
S.TITRA: C1 C2 C3 C4 T1
T2 T3 T4[ARRET]
REC TV/VCR STOP
SLOW PAUSE REW
PLAY
FF
BOUGER[t s] CHOISIR[T S
]
Understanding Auto-Power-Off feature
If a vacant channel is tuned or TV broadcast for a day is finished, the TV will
automatically turn off after about 15 minutes.
This feature does not operate in the VIDEO mode.
Understanding Last Mode Memory feature
If the power is cut off while you are viewing the TV and the power is
resupplied, the TV is turned on automatically by the Last Mode Memory
feature. If the power is going to be off or when you leave home for a long
time, remove the power plug from the wall outlet to prevent the TV from
turning on in your absence.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Channel Memory
The channel memory is the list of TV channel numbers your TV will stop on when you press the CHANNEL L or M button.
First, use the TV/CABLE and CH PROGRAM functions to preset all active channels in your area.
If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into only desired channels.
CHANNEL t/s
TV/CABLE function
1 Press MENU until the Setup menu is
displayed on the screen.
TIMER:
0 MIN
POWER
TV/CABLE:
CH PROGRAM
[TV]CABLE
MENU
TV/VIDEO VOLUME
CHANNEL
ADD/ERASE:
[ADD]ERASE
2 Press sor tuntil “TV/CABLE” is
V-CHIP CONTROL
FAVORITE CH
T
S
t
s
displayed in purple.
MOVE[t s] SELECT[T S
]
3 Press Tor Suntil the mode that corre-
sponds to your TV signal system is dis-
played in purple.
T/S
t/s
MENU
TIMER:
0 MIN
TV/CABLE:
CH PROGRAM
TV[CABLE]
ADD/ERASE:
[ADD]ERASE
TV: TV broadcast signals.
V-CHIP CONTROL
FAVORITE CH
(VHF channels 2 through 13 and UHF
channels 14 through 69)
MOVE[t s] SELECT[T S
]
CABLE: Cable TV signals.
(Cable channels 1 through 125)
POWER
RECALL
MUTE
o
CH PROGRAM function
3
6
1
4
2
1 Press MENU until the Setup menu is
Channel
Number
displayed on the screen.
TIMER:
0 MIN
5
TV/CABLE:
CH PROGRAM
TV[CABLE]
ADD/ERASE:
[ADD]ERASE
2 Press sor trepeatedly until “CH PRO-
8
9
7
V-CHIP CONTROL
FAVORITE CH
CH RTN
GRAM” is displayed in purple.
100
0
ENT
MOVE[t s] START[T S
]
CH
T/S
MENU/
ENTER
3 Press Tor Sto start channel programming.
The TV will automatically cycle through all
the TV or CABLE channels depending on
the mode selected, and store active channels
in the channel memory.
VOL
VOL
s/t
CHANNEL
s/t
CH
MENU
TV
CABLE
VCR
EXIT
CH PROGRAM
CABLE 24
FAV CH
TV/VIDEO
A
REC TV/VCR STOP
SLOW PAUSE REW
PLAY
FF
4 When channel programming is complete,
you will see the message at the right.
CH PROGRAMMING
COMPLETED
CABLE 4
5 Press CHANNEL sor tto make sure the channel programming has
been done properly.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CABLE channel reference chart
ADD/ERASE function
Correspond-
ing CABLE
channel
Correspond-
ing CABLE
channel
Number on
this TV
Number on
this TV
After performing the CH PROGRAM function, you can add or erase specific
channels.
1
5
A-8
5(A-7)
6(A-6)
A
67
68
69
67
68
69
1 Select the channel you want to erase using the CHANNEL L or M
button, or select the channel you want to add using the Channel
Number buttons.
2 Press MENU repeatedly until the Setup
6
TIMER:
0 MIN
menu is displayed on the screen.
TV/CABLE:
CH PROGRAM
[TV]CABLE
ADD/ERASE:
[ADD]ERASE
14
15
16
3 Press sor trepeatedly until “ADD/
V-CHIP CONTROL
FAVORITE CH
ERASE” is displayed in purple.
B
92
93
92
MOVE[t s] SELECT[T S
]
C
93
4 Press Tor S:
TIMER:
0 MIN
To erase the channel
TV/CABLE:
CH PROGRAM
[TV]CABLE
94
94
Press the button until “ERASE” is displayed
in purple indicating that the channel has
been erased from the memory.
ADD/ERASE:
ADD[ERASE]
V-CHIP CONTROL
FAVORITE CH
34
35
36
37
38
U
V
95
A-5
A-4
A-3
A-2
A-1
100
101
102
MOVE[t s] SELECT[T S
]
96
To add the channel
W
97
TIMER:
0 MIN
Press the button until “ADD” is displayed in
purple indicating that the channel has been
memorized.
TV/CABLE:
CH PROGRAM
[TV]CABLE
ADD/ERASE:
[ADD]ERASE
AA
BB
98
V-CHIP CONTROL
FAVORITE CH
99
MOVE[t s] SELECT[T S
]
100
101
102
5 Repeat steps 1 to 4 for other channels.
60
61
62
63
64
65
66
XX
YY
ZZ
You have now completed the channel programming.
AAA
BBB
65
123
124
125
123
124
125
66
The above chart is typical of many cable
system channel allocations. If in doubt,
consult your cable company.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV Programs or Video input
Selecting the TV channels
CHANNEL t/s
Select a channel in one of the following two ways.
G
To scan the memorized channels in numerical sequence
POWER
MENU
TV/VIDEO VOLUME
CHANNEL
Press CHANNEL sto select the next higher channel.
Press CHANNEL tto select the next lower channel.
Press the button again to select the next memorized channels.
T
S
t
s
G
MENU
To select a channel directly
Press the Channel Number buttons (0-9 and 100).
To select channel 4, press “4” (or press “0”, “4”).
To select channel 38, press “3”, “8”.
t/s
TV/VIDEO T/S
To select channel 125, press “100”, “2”, “5” in sequence.
If you cannot select certain channels, either TV (off the air) or CA-
BLE channels
Check if the TV/CABLE function is properly set. See page 16.
RECALL
POWER
RECALL
MUTE
o
Selecting the video input source
3
6
1
4
2
5
8
0
You can use the TV/VIDEO button to view signal coming from other
devices, such as VCR's or video disc players that may be connected to your
TV. (See “Connecting Your TV” on page 5.)
Channel
Number
9
7
Note:To operate your TV and video equipment properly, refer to the instructions
CH RTN
furnished with the video equipment.
100
ENT
1 Turn the TV and the video equipment ON.
CH
2 Press TV/VIDEO on the Remote Control or
MENU/
ENTER
VOL
VOL
CHANNEL
s/t
on the TV to select “VIDEO 1” or “VIDEO
2”.
TV
CH
The selected source will be displayed in
VIDEO1
VIDEO2
TV
CABLE
VCR
purple.
EXIT
EXIT
TO SELECT PUSH TV/VIDEO
FAV CH
TV/VIDEO
A
TV/VIDEO
REC TV/VCR STOP
SLOW PAUSE REW
PLAY
FF
3 Operate the video equipment normally.
About the Demonstration Mode
When this function is activated, your TV will automatically display a
variety of its on-screen menus and special features. This function is pro-
vided for demonstration purposes only.
1 Press MENU, then sor tuntil “DEMO”
LANGUAGE:[ENGLISH]FRANCAIS
in the Option menu is displayed in purple.
ESPANOL
DEMO:
[START]STOP
C.CAPT:
C1 C2 C3 C4 T1
T2 T3 T4[OFF]
2 Press T or Sto select “START”.
The on-screen demonstration will start after
about 15 seconds.
MOVE[t s] SELECT[T S
]
Tostopthedemonstration
Press EXIT or RECALL on the Remote or select “STOP” in the menu.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Convenient Remote Functions
Displaying on-screen information
Press RECALL to display the following on-
screen information.
RECALL
MUTE
STEREO TV-PG
POWER
SAP
L V
RECALL
MUTE
CAPTION
TEXT
o
G
Channel number or VIDEO mode selected
G
Stereo or SAP audio status
3
6
1
4
2
5
8
0
CABLE 4
G
V-CHIP rating
Channel
Number
9
7
CH RTN
Muting the sound
100
ENT
CH RTN
Press MUTE to mute the sound. The word
“MUTE” will be displayed on the screen as
shown. This is useful during telephone calls or
other interruptions.
CH
MENU/
ENTER
VOL
VOL
To restore the sound, press MUTE again.
CH
MUTE
Note: WhentheMUTEbuttonispressed,theClosed-
Captionedfeature“C1”isactivated.(“MUTE”
on-screen-displaywilldisappear.)Todeactivate,
presstheMUTEbuttonagainorpresstheVolume
buttontorestorethesound.(Thisfeatureonly
functionswhentheClosedCaptionmodeissetto
“OFF”.)
TV
CABLE
VCR
EXIT
FAV CH
TV/VIDEO
A
REC TV/VCR STOP
SLOW PAUSE REW
PLAY
FF
Changing quickly between two channels
Press CH RTN to return to the last channel viewed.
This is useful should you want to view two channels. This allows you to view
two programs without entering an actual channel number each time.
To operate this function
1 Select the first channel you want to view.
(Viewing channel)
4
2 Select the other channel with the Channel
Number buttons.
3 Press CH RTN.
The previous channel will return.
(Previous channel)
Each time you press CH RTN, the TV will
6
switch back and forth between the two
channels.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture
You can adjust the picture quality (CONTRAST, BRIGHTNESS, SHARPNESS, COLOR and TINT) to suit your taste.
Adjusting the picture quality
POWER
MENU
TV/VIDEO VOLUME
CHANNEL
1 Press MENU repeatedly until the Picture 1
CONTRAST
–
–
+
+
+
+
+
T
S
t
s
menu is displayed on the screen.
BRIGHTNESS
SHARPNESS –
COLOR
TINT
–
–
2 Press sor tuntil the item you want to
RESET
adjust is displayed in purple.
MOVE[t s] ADJUST[T S
]
MENU
T/S
t/s
3 Press Tor Sto adjust the level.
CONTRAST
–
–
+
+
+
+
+
BRIGHTNESS
SHARPNESS –
Example: CONTRAST
COLOR
TINT
–
–
RESET
MOVE[t s] ADJUST[T S
]
POWER
RECALL
MUTE
o
3
6
1
4
2
Pressing
Selection
5
T
S
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
lower
darker
softer
paler
higher
8
9
7
lighter
sharper
deeper
greenish
CH RTN
100
0
ENT
CH
TINT
reddish
T/S
MENU/
ENTER
VOL
VOL
s/t
To reset the Picture and Sound adjustments to the factory-preset status
(maximum CONTRAST and all other adjustments centered)
CH
MENU
TV
CABLE
VCR
EXIT
1 Press MENU until the Picture 1 menu is
FAV CH
TV/VIDEO
A
displayed on the screen.
CONTRAST
–
–
+
+
+
+
+
BRIGHTNESS
PLAY
FF
SHARPNESS –
REC TV/VCR STOP
SLOW PAUSE REW
COLOR
TINT
–
–
2 Press sor tuntil “RESET” is displayed
in purple.
RESET
MOVE[t s] ADJUST[T S
]
3 Press Tor S.
RESET
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the color temperature
Note:
The RESET function adjusts the following picture
and audio functions.
These selections change the appearance of gray and white tones of the
picture.
G
CONTRAST ............................................... Max.
G
BRIGHTNESS ........................................ Center
1 Press MENU repeatedly until the Picture
G
COLOR................................................... Center
TINT ....................................................... Center
2 menu is displayed on the screen.
COLOR
G
TEMPERATURE:[COOL]MEDIUM WARM
G
PICTURE
SHARPNESS .......................................... Center
COLOR TEMPERATURE ....................... COOL
PREFERENCE:
NORMAL THEATER
2 Press tor suntil “COLOR TEMPERA-
G
[MEMORY]
G
TURE” is displayed in purple.
PICTURE PREFERENCE ................ NORMAL
BASS ....................................................... Center
G
MOVE[t s] SELECT[T S
]
G
TREBLE ................................................. Center
G
BALANCE .............................................. Center
3 Press Tor Suntil the mode you want is
displayed in purple.
COLOR
TEMPERATURE: COOL MEDIUM [WARM]
PICTURE
Mode
COOL
Picture quality
Bluish
PREFERENCE:
NORMAL THEATER
[MEMORY]
MEDIUM
WARM
Neutral
Reddish
MOVE[t s] SELECT[T S
]
Selecting the picture preference function
You can select a desired picture tone from three picture preset modes
(NORMAL, THEATER, MEMORY) instantly.
1 Select “PICTURE PREFERENCE”
following the steps 1 and 2 above.
COLOR
TEMPERATURE:[COOL]MEDIUM WARM
PICTURE
PREFERENCE:
[NORMAL] THEATER
MEMORY
MOVE[t s] SELECT[T S
]
2 Press Tor Suntil the mode you want is
displayed in purple.
COLOR
TEMPERATURE:[COOL]MEDIUM WARM
PICTURE
PREFERENCE:
NORMAL THEATER
[MEMORY]
MOVE[t s] SELECT[T S
]
Mode
NORMAL
Picture quality
The picture quality preset at the factory
THEATER
MEMORY
Movie-like picture setting
The picture quality you set (First follow page 20.)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Sound
You can adjust the sound quality (BASS, TREBLE and BALANCE) to suit your taste.
Adjusting the sound quality
POWER
MENU
TV/VIDEO VOLUME
CHANNEL
1 Press MENU until the Audio menu is
MTS:
[STR]SAP MONO
T
S
t
s
displayed on the screen.
–
–
–
+
+
+
BASS
TREBLE
BALANCE
2 Press sor tuntil the item you want to
SURROUND: [ON]OFF
adjust is displayed in purple.
MOVE[t s] SELECT[T S
]
MENU
T/S
t/s
3 Press Tor Sto adjust the level.
MTS:
[STR]SAP MONO
–
–
–
+
+
+
BASS
Example: BASS
TREBLE
BALANCE
SURROUND: [ON]OFF
POWER
RECALL
MUTE
o
MOVE[t s] ADJUST[T S
]
3
6
1
4
2
5
Pressing
Selection
T
S
8
9
7
CH RTN
BASS
weaker
weaker
stronger
stronger
100
0
ENT
TREBLE
decreases the
right channel
decreases the
left channel
BALANCE
CH
T/S
MENU/
ENTER
VOL
VOL
s/t
CH
MENU
TV
CABLE
VCR
EXIT
FAV CH
TV/VIDEO
A
REC TV/VCR STOP
SLOW PAUSE REW
PLAY
FF
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timer (Sleep Timer)
With the timer, you can set the TV to turn off automatically after a pre-determined period of time (up to 3 hours, in 10 minutes
increments).
Setting the timer
POWER
MENU
TV/VIDEO VOLUME
CHANNEL
1 Press MENU until the Setup menu is
T
S
t
s
displayed on the screen.
TIMER:
0 MIN
TV/CABLE:
CH PROGRAM
[TV]CABLE
ADD/ERASE:
[ADD]ERASE
V-CHIP CONTROL
FAVORITE CH
MOVE[t s] SELECT[T S
]
T/S
MENU
t/s
POWER
2 Press sor tuntil “TIMER” is displayed in
TIMER:
0 MIN
purple.
TV/CABLE:
CH PROGRAM
[TV]CABLE
ADD/ERASE:
[ADD]ERASE
V-CHIP CONTROL
FAVORITE CH
POWER
RECALL
MUTE
o
MOVE[t s] SELECT[T S
]
POWER
3
6
1
4
2
5
8
0
3 Press Tor Sto enter the length of time you
want the TV to stay on.
TIMER:
30 MIN
TV/CABLE:
CH PROGRAM
[TV]CABLE
Each time you press the button, the time
display will increase (S)or decrease (T) by
10 minutes.
9
7
ADD/ERASE:
[ADD]ERASE
V-CHIP CONTROL
FAVORITE CH
CH RTN
100
ENT
MOVE[t s] SELECT[T S
]
0
10
170
180 MIN
CH
T/S
MENU/
ENTER
VOL
VOL
s/t
CH
MENU
To cancel the setting
Press POWER twice, once to turn the TV off and once to turn it on again.
TV
CABLE
VCR
EXIT
FAV CH
TV/VIDEO
A
REC TV/VCR STOP
SLOW PAUSE REW
PLAY
FF
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Stereo/SAP Broadcasts
The MTS (Multi-channel TV Sound) feature allows you to improve your TV viewing with high fidelity stereo sound.
This TV also allows you to activate or deactivate the stereo surround sound effect.
MTS also provides for an extra channel, SAP (Second Audio Program), used to transmit a second language or other audio
information.
Listening to stereo sound
POWER
MENU
TV/VIDEO VOLUME
CHANNEL
1 When the TV receives a stereo broadcast,
the word “STEREO” is displayed on the
screen whenever the TV is turned on, a
channel is selected, or the RECALL button
is pressed.
T
S
t
s
STEREO
SAP
TV 4
MENU
T/S
t/s
2 Press MENU until the Audio menu is
displayed on the screen.
MTS:
STR SAP[MONO]
–
+
+
+
BASS
TREBLE
BALANCE
SURROUND:
–
–
3 Press sor tuntil “MTS” is displayed in
purple.
ON[OFF]
POWER
RECALL
MUTE
o
If a stereo broadcast is received, “STR” will
be displayed in yellow.
MOVE[t s] SELECT[T S
]
3
6
1
4
2
4 Press Tor Suntil “STR” (stereo) is
5
MTS:
[STR]SAP MONO
displayed in purple.
–
–
–
+
+
+
BASS
8
9
7
TREBLE
BALANCE
SURROUND:
CH RTN
You should leave your TV on “STR” so you
can automatically receive stereo or
ON[OFF]
100
0
ENT
monaural sound, depending on the
MOVE[t s] SELECT[T S
]
broadcast type. If the stereo sound is noisy,
select “MONO” to reduce the noise.
CH
T/S
MENU/
ENTER
VOL
VOL
s/t
CH
Activating the surround sound effect
MENU
TV
CABLE
VCR
1 Select the Stereo mode as described above.
EXIT
FAV CH
TV/VIDEO
A
2 Press MENU until the Audio menu is
MTS:
[STR]SAP MONO
displayed on the screen.
REC TV/VCR STOP
SLOW PAUSE REW
PLAY
FF
–
–
–
+
+
+
BASS
TREBLE
BALANCE
3 Press sor tuntil “SURROUND” is
SURROUND: ON[OFF]
displayed in purple.
MOVE[t s] SELECT[T S
]
4 Press Tor Sto select “ON”.
MTS:
[STR]SAP MONO
–
–
–
+
+
+
BASS
TREBLE
BALANCE
In general, you should leave your TV on
SURROUND [ON] so it can automatically
produce surround stereo or monaural sound,
depending on the broadcast type.
SURROUND: [ON]OFF
Note: “MTS” function is not available while in the
MOVE[t s] SELECT[T S
]
VIDEO mode.
To deactivate the surround effect
Select “OFF” in step 4 above.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to second language
1 When the TV receives a SAP broadcast,
STEREO
SAP
the word “SAP” is displayed on the screen.
TV 6
2 Press MENU until the Audio menu is
displayed on the screen.
MTS:
[STR]SAP MONO
–
+
+
+
BASS
TREBLE
BALANCE
–
–
3 Press tor suntil “MTS” is displayed in
purple.
SURROUND: [ON]OFF
If a SAP broadcast is received, “SAP”
will be displayed in yellow.
MOVE[t s] SELECT[T S
]
4 Press Tor Suntil “SAP” is displayed in
purple.
MTS:
STR[SAP]MONO
–
–
–
+
+
+
BASS
You will hear only the second language
from the left and right speakers.
TREBLE
BALANCE
SURROUND: [ON]OFF
MOVE[t s] SELECT[T S
]
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Your Favorite Channels
The Favorite Channel Programming feature allows you to program up to 12 of your favorite channels.
Once programmed, you can use the FAV CH t/s buttons on the Remote Control to scan through only your favorite chan-
nels, skipping other channels you do not normally view.
You can use the CHANNEL s/tbuttons to scan through all the channels you have programmed into the TV’s memory.
POWER
Programming your favorite channels
MENU
TV/VIDEO VOLUME
CHANNEL
1 Select a channel you want to program.
(You must be on the channel you want
to set or clear.)
T
S
t
s
Example: channel 2
t/s
T/S
2
MENU
2 Press MENU until the Setup menu is
TIMER:
0 MIN
displayed on the screen.
TV/CABLE:
CH PROGRAM
[TV]CABLE
ADD/ERASE:
[ADD]ERASE
3 Press sor tuntil “FAVORITE CH” is
V-CHIP CONTROL
FAVORITE CH
displayed in purple.
POWER
RECALL
MUTE
o
MOVE[t s] START[T S
]
3
6
1
4
2
5
8
0
4 Press Tor Sto display the FAVORITE CH
program menu.
FAVORITE CH
[SET]CLEAR
0
0
0
0
0
0
0
0
0
0
0
0
Each time you press Tor S, you are guided
between “SET” and “CLEAR”.
9
7
CH RTN
[TV:CYAN,CABLE:BLUE]
100
ENT
SELECT[T S] SET[t s
]
CH
T/S
MENU/
ENTER
s/t
VOL
VOL
5 To program channels:
FAVORITE CH
SET[CLEAR]
Select “SET”. Then press sor tuntil the
channel number to be programmed (“2” in
this example) replaces “0” on the display.
CH
MENU
2
0
0
0
0
0
0
0
0
0
0
0
TV
CABLE
VCR
[TV:CYAN,CABLE:BLUE]
EXIT
To erase channels:
SELECT[T S] CLEAR[t s]
FAV CH
TV/VIDEO
A
Select “CLEAR”. Then press sor tuntil
“0” replaces the channel number to be
erased, “2” for example.
FAV CH
t/s
REC TV/VCR STOP
SLOW PAUSE REW
PLAY
FF
6 Repeat steps 1 to 5 for other channels.
Selecting your favorite channels
To select the favorite channels you have programmed, use the FAV CH
t/s buttons on the Remote Control instead of using the CHANNEL s/t
buttons.
Note: The FAV CH t/sbuttons cannot function if you have not programmed your
favorite channels.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Closed Caption Feature
You have two options with the closed caption feature: captions or text.
A caption is a printed version of the dialogue, narration and/or sound effect of a TV program.Text is information not related to
the program that appears on the lower half of the screen.
Viewing captions or text
POWER
MENU
TV/VIDEO VOLUME
CHANNEL
1 Select the desired program.
The captioned programs are usually noted
in your local TV listings by service marks
such as “CC”.
T
S
t
s
2 Press MENU until the Option menu is
t/s
MENU
T/S
LANGUAGE:[ENGLISH]FRANCAIS
ESPANOL
displayed on the screen.
DEMO:
START[STOP]
C.CAPT:
C1 C2 C3 C4 T1
T2 T3 T4[OFF]
3 Press sor tuntil “C.CAPT” is displayed
in purple.
MOVE[t s] SELECT[T S
]
POWER
RECALL
MUTE
o
4 Press Tor Sto select the closed caption
LANGUAGE:[ENGLISH]FRANCAIS
ESPANOL
mode.
3
6
1
4
2
5
8
0
DEMO:
START[STOP]
C.CAPT: [C1]C2 C3 C4 T1
T2 T3 T4 OFF
MOVE[t s] SELECT[T S
]
9
7
CH RTN
100
ENT
G
G
Select C1, C2, C3, or C4 to
view captions. Select C1 for
translation of the primary
language in your area.
Select T1, T2, T3, or T4 to
view Text.
CH
T/S
MENU/
ENTER
VOL
VOL
s/t
CH
MENU
TV
CABLE
VCR
EXIT
WORLD WEATHER
FAV CH
TV/VIDEO
A
Temps
F
Current
Weather
Clear
C
LONDON
MOSCOW
PARIS
51
11
14
12
19
18
57
Cloudy
Clear
REC TV/VCR STOP
SLOW PAUSE REW
PLAY
FF
53
66
The top of the mountain is covered
with snow all the year round.
ROME
TOKYO
Cloudy
Rain
65
To turn off the closed-captioned feature
Select “OFF” in step 4 above.
Notes:
G
A closed-captioned signal may not be decoded in the following situations.
– When a video tape has been dubbed.
– When the signal reception is weak.
– When the signal reception is non-standard.
G
If you select a closed-captioned channel and the Text mode, the text screen always
appears.
However, text characters are not displayed when no signal is aired.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Using V-CHIP Control
Some TV programs and movies include signals that classify the content of the program (violence, sex, dialog, language).
The V-CHIP Control feature in this TV detects the signals and blocks the programs according to your selections.
To use this feature, perform the following setup.
Selecting the V-CHIP CONTROL menu
1 Press MENU then sor trepeatedly until
POWER
TIMER:
0 MIN
“V-CHIP CONTROL” in the Set up menu
RECALL
MUTE
TV/CABLE:
CH PROGRAM
[TV]CABLE
o
is displayed in purple.
RECALL
ADD/ERASE:
[ADD]ERASE
V-CHIP CONTROL
FAVORITE CH
3
6
1
4
2
5
8
0
MOVE[t s] START[T S
]
Number
buttons
9
7
2 Press Tor Sto display the pin code
CH RTN
entering mode.
100
ENT
G
Factory reset status
BLOCKING IS RESET
PLEASE ENTER NEW PIN CODE
Set your 4 digit code by pressing the
CH
Number buttons (0-9).
1110
T/S
MENU/
ENTER
VOL
VOL
s/t
Example:To enter “1110”
CH
Press 1, 1, 1, and 0 in order.
MENU
SELECT[0-9] END[EXIT]
TV
CABLE
VCR
EXIT
EXIT
G
When the pin code is already stored
FAV CH
TV/VIDEO
A
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE
Press the Number buttons (0-9) to
enter the 4-digit pin code used to
block channels.
REC TV/VCR STOP
SLOW PAUSE REW
PLAY
FF
1234
SELECT[0-9] END[EXIT]
Ifawrongpincodehasbeenentered
This message will appear. Try to enter
the correct code again.
INCORRECT PIN CODE
PLEASE ENTER PIN CODE
1235
If you can not remember the pin code you
have stored, while in the pin code entering
mode, press the RECALL button four
times within 5 seconds.
SELECT[0-9] END[EXIT]
The pin code you have stored will be
released. (Factory reset status).
3 After about 1 second, the screen changes
to the V-CHIP CONTROL menu as
shown.
ENABLE BLOCKING : Y[N]
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
To return to the normal picture
BLOCK CHANNEL
Press EXIT.
MOVE[t s ] SELECT[T S ]
Continue to set each item following the steps
on the next page.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the V-CHIP CONTROL menu
ENABLE BLOCKING
V-CHIP CONTROL menu
Press Tor S to select “Y” or “N”.
Y: To enable your setting (Block)
N: To release your setting (Unblock)
Note: The BLOCK CHANNEL function is not affected with this
selection.
ENABLE BLOCKING : [Y]N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
SET RATING (Setting the movie or TV ratings for your choice)
1 Press Tor S to display the SET RATING menu.
2 Press t (or s) to select item.
MOVE[t s] SELECT[T S]
3 Press Sto block (display “✕”)
Press Tto unblock (display “ꢀ”)
To select each item
Press tor s.
4 Repeat steps 2 and 3 to set the next item.
1st menu
2nd menu
Press t
TV RATING MA 14 PG G
DIALOG:
MPAA RATING:
X NC17 R PG13 PG G
LANGUAGE:
SEX:
VIOLENCE:
NO DLSV:
YOUTH TV RATING:
Y7FV Y7 Y
Press s
t
BACK TO V-CHIP MENU
TV RATING
MOVE[t s ] SELECT[T S ]
MOVE[t s ] SELECT[T S ]
About Rating
MPAA RATING: Independent rating system for movies
G: General Audience (Appropriate for all ages)
PG: Parental Guidance Suggested (Some material may not be suitable for children)
PG13:Parents Strongly Cautioned (Some material may be inappropriate
for children under 13)
R: Restricted (Under 17 requires accompanying parent or adult guardian.)
NC17: Not intended for anyone 17 and under
X: X-rated (For adults only)
TV RATING: Independent rating system for Broadcasters
Y: All Children (This program is designed to be appropriate for all children)
Y7, Y7FV: Directed to Older Children (This program is designed for children
age 7 and above. Note: For those programs where fantasy violence
may be more intense or more combative than other programs in this
category, such programs will be designated TV-Y7-FV.)
The rating of the TV programs you are now
watching can be confirmed by pressing the
RECALL button.
G:General Audience (Most parents would find this program suitable for
all ages.)
PG: Parental Guidance Suggested (This program contains material that
parents may find unsuitable for younger children.)
TV-PG
PG
V
L V
L
D) Some suggestive dialog L) Infrequent coarse language
S) Some sexual situations V) Moderate violence
14: Parents Strongly Cautioned (This program contains some material that many
parents would find unsuitable for children under 14 years of age.)
D) Intensely suggestive dialog L) Strong coarse language
TV 6
S) Intense sexual situations
V) Intense violence
MA:Mature Audience Only (This program is specifically designed to be
viewed by adults and therefore may be unsuitable for children under 17.)
L) Crude or indecent language S) Explicit sexual activity
V) Graphic violence
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using V-CHIP Control (continued)
Adjusting the V-CHIP CONTROL menu (continued)
SET BLOCKING OPTIONS
V-CHIP CONTROL menu
Press Tor S to display the SET BLOCKING OPTIONS menu, then
press t or s to select item.
ENABLE BLOCKING : [Y]N
SET RATING
BLOCK MPAA UNRATED
Press Tor S to select “Y”(Block) or “N”(Unblock) for unrated pro-
grams on MPAA rating system.
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
BLOCK TV NONE RATING
Press Tor S to select “Y”(Block) or “N”(Unblock) for programs rated
NONE on TV PARENTAL GUIDELINES.
If you select “Y”, the NOTICE shown below will be displayed since the
emergency information may also be blocked.
MOVE[t s] START[T S]
SET BLOCKING OPTION menu
If you select “Y” on TV rating
To select each item
Press tor s.
BLOCK MPAA UNRATED: Y[N]
BLOCK TV NONE RATING:Y[N]
BACK TO V-CHIP MENU
BLOCK MPAA UNRATED:
BLOCK TV NONE RATING:[Y]N
BACK TO V-CHIP MENU
Y[N]
NOTICE:ENABLING THIS OPTION
MAY BLOCK EMERGENCY
MESSAGES
POWER
RECALL
MUTE
MOVE[t s] SELECT[T S]
MOVE[t s] SELECT[T S]
o
3
6
1
4
2
5
8
0
BACK TO V-CHIP MENU
Press Tor S to return to the V-CHIP CONTROL menu.
Number
buttons
NEW PIN CODE (Changing Pin Code)
9
7
CH RTN
1 Press Tor S to display the NEW PIN
100
ENT
CODE menu.
PLEASE ENTER NEW PIN CODE
––––
CH
T/S
MENU/
ENTER
VOL
VOL
s/t
SELECT[0-9] END[EXIT]
CH
MENU
TV
CABLE
VCR
2 Press the Number buttons (0-9) to enter
a 4-digit code.
EXIT
EXIT
FAV CH
TV/VIDEO
A
PLEASE ENTER NEW PIN CODE
1122
The numbers you enter will replace the
dashes in the display.
REC TV/VCR STOP
SLOW PAUSE REW
PLAY
FF
Example: To enter “1122”
SELECT[0-9] END[EXIT]
Press 1, 1, 2, and 2 in order.
3 After about 1 second, the display will
ENABLE BLOCKING : [Y]N
SET RATING
return to the V-CHIP CONTROL menu.
SET BLOCKING OPTIONS
NEW PIN CODE
BLOCK CHANNEL
MOVE[t s] SELECT[T S]
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Unblocking programs temporarily
BLOCK CHANNEL function
1 If you try to watch a TV program that exceeds the rating
limits you set, the TV will enter into the program block
mode.
With the CHANNEL BLOCK function, you can block
specific channels. The TV will not be able to tune these
channels with the CHANNEL s/tbuttons or Channel
Number buttons, unless you clear the setting.
This TV has 8 memory spaces total, 4 for TV mode and 4
for CABLE mode.
THIS PROGRAM HAS BEEN BLOCKED!
TV–PG
L
V
EXCEEDS SET LIMITS
PUSH MUTE TO ENTER PIN
To block channels
CABLE
4
1 Select a channel you want to block.
2 Select “BLOCK
2 If you want to watch the blocked program temporarily,
ENABLE BLOCKING : [Y]N
SET RATING
SET BLOCKING OPTIONS
NEW PIN CODE
CHANNEL” in the V-CHIP
press MUTE.
CONTROL menu by
BLOCK CHANNEL
pressing tor s.
Press the Number
buttons (0-9) to enter the
4-digit code you have
BLOCKING IS ACTIVE
PLEASE ENTER PIN CODE
TO TEMPORARILY UN-BLOCK
~~~–
MOVE[t s ] SELECT[T S ]
stored.
If the number is correct, the
block mode will be
released.
3 Press Tor S to display the
SELECT[0-9] END[EXIT]
BLOCK CHANNEL
[SET]CLEAR
BLOCK CHANNEL menu.
0
0
0
0
After 1 second, normal
picture will appear.
SELECT[T S ] SET[t s ]
END[EXIT]
All blocking is disabled until the TV is turned off.
It will be enabled when the power is reapplied.
4 Press Tor S to select
“SET”, then press tor s
until the channel number to
be blocked (“2” in this
example) replaces “0” on
the display.
If a wrong pin code is
entered, the message
appears.
Enter the correct code
BLOCK CHANNEL
[SET]CLEAR
INCORRECT PIN CODE
PLEASE ENTER PIN CODE
TO TEMPORARILY UN-BLOCK
~~~~
0
0
0
2
again.
SELECT[T S ] SET[t s ]
END[EXIT]
SELECT[0-9] END[EXIT]
5 Repeat steps 1 to 4 for other channels.
6 Select another channel before turning off the TV.
To restore channels
1 Select “CLEAR” following the
BLOCK CHANNEL
SET [CLEAR]
above steps 2 to 4.
15
10
6
2
2 Press tor suntil “0”
replaces the channel
numbers.
SELECT[T S ] CLEAR[t s ]
END[EXIT]
0
0
0
0
3 Press EXIT to erase the display.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning and Care
WARNING: TV sets use High Voltage. Do not try to remove the cabinet back. Refer servicing to qualified service
personnel.
I To clean the TV screen:
I To maintain the finish and appearance of the cabinet,
polish it from time to time with a quality furniture
polish.
1. First remove the plug from the power outlet to
avoid possible shock hazard.
2. Use a clean cellulose sponge or chamois cloth
dampened with a solution of mild detergent and
warm water to clean TV screen and trim. Do not
use too much water on the TV screen. Water spills
into the cabinet may cause damage to the TV.
Avoid excessive water.
Caution:Never use strong solvents such as thinner, benzene or
other chemicals on or near cabinet, as they might damage
the finish of the cabinet.
3. Remove any extra moisture with the same cloth or a
dry one.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Television system
Channel coverage
NTSC standard
VHF: 2 through 13
UHF: 14 through 69
Cable TV: mid band (A-8 through A-1, A through I)
super band (J through W)
hyper band (AA through ZZ, AAA, BBB)
ultra band (65 through 94, 100 through 125)
Power source
120V AC, 60Hz
Power consumption
27A40: 88 W (average)
32A40: 98 W (average)
36A40: 98 W (average)
Audio power
Speaker type
5W + 5W
27A40:
2-3/8 x 3-1/2 inches (60 x 90 mm)
32A40/36A40: 2-3/8 x 4-3/4 inches (60 x 120 mm)
Audio/Video terminals
S-VIDEO INPUT
Y-INPUT: 1V (p-p), 75 ohm, negative sync.
C-INPUT: 0.286V (p-p) (burst signal), 75 ohm
AUDIO/VIDEO INPUT
VIDEO: 1V(p-p), 75 ohm, negative sync.
AUDIO: 150mV(rms) (30% modulation equivalent, 47k ohm)
ColorStream™ (component video) INPUT
Y: 1V (p-p), 75 ohm
C
C
R: 0.7 V (p-p), 75 ohm
B: 0.7 V (p-p), 75 ohm
AUDIO/VIDEO OUTPUT
VIDEO: 1V(p-p), 75 ohm, negative sync.
AUDIO: 150mV(rms) (30% modulation equivalent, 4.7k ohm)
Dimensions
27A40:
32A40:
36A40:
Width
Height
Depth
Width
Height
Depth
Width
Height
Depth
26-5/8 inches (676mm)
24-1/4 inches (617mm)
22-1/4 inches (565mm)
30-13/16 inches (783mm)
27-5/16 inches (694mm)
23-1/8 inches (587mm)
34-9/16 inches (878mm)
30-1/2 inches (775mm)
25-3/4 inches (654mm)
Mass
27A40: 75 lbs (34.0kg)
32A40: 125 lbs (56.7kg)
36A40: 158 lbs (71.7kg)
Supplied accessories
Optional TV stand
Remote Control with 2 size “AA” batteries
27A40:
—
32A40: ST3215
36A40: ST3615
Design and specifications are subject to change without notice.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Calling Service Personnel
Before calling service personnel, please check the following chart for a possible cause of the problem you are experiencing. A
minor adjustment on your part may eliminate the problem and restore your TV reception.
Problem
Checks and Adjustments
Page
G
TV will not turn on
Make sure the power cord is plugged in, then press POWER button.
Check battery in the Remote. (Maybe batteries are “dead”.)
15
8
G
G
No picture, no sound
No sound, picture OK
Check antenna/cable connections.
5
G
Maybe sound is muted. Try pressing VOLUME Sbutton.
15
G
Try another channel. (Maybe station trouble.)
G
Poor sound, picture OK
Poor picture, sound OK
Try another channel. (Maybe station trouble or local interference
from appliance.)
G
Check antenna/cable connections.
G
Try another channel. (Maybe station trouble or local interference.)
G
Adjust Picture menu.
20
G
Poor reception of broadcast channels
Try another channel.
G
Check antenna connections.
5
G
If using VCR, check TV/VCR button.
10
G
No UHF, VHF OK
Make sure TV/CABLE function is in “TV” mode.
16
27
G
Black box appears on the screen
Cannot select a certain channel
Captioning may be turned on
G
That channel may be locked out with BLOCK CHANNEL function, or
erased with the ADD/ERASE function.
31
17
G
Multiple images (ghosts)
Poor color or no color
Try another channel. (Maybe station trouble.)
Use a highly directional outdoor antenna.
G
G
Try another channel. (Maybe station trouble or local interference.)
G
Adjust TINT and/or COLOR in the Picture menu.
20
G
If you change the direction of the TV while the TV is activated, the
picture may suffer from color shading. If so, turn off the TV and allow
it to cool for about 30 minutes, then turn on the TV again.
The picture should improve.
G
No stereo or SAP sound from an MTS
broadcast
Check if MTS function is properly set.
24
G
The Remote Control does not operate
Check if TV/CABLE/VCR switch is properly set.
Maybe something was between the Remote and the remote sensor.
Maybe batteries are dead. Try replacing batteries with new ones.
9, 10
8
G
G
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited United States Warranty
Toshiba America Consumer Products, Inc. (“TACP”) and Toshiba Hawaii Inc. (“THI”) make the following limited warranties. These limited warranties extend
to the original consumer purchaser or any person receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee.
Owner’s Manual and Demographic Card
Limited One (1) Year Warranty
You should read this owner’s manual thoroughly before operating this product.
You should complete and mail the enclosed Demographic card within ten days
after you, or the person who has given you this product as a gift, purchased this
product. This is one way to enable TACP/THI to provide you with better
customer service and improved products. Failure to return the Demographic
card will not affect your rights under this warranty.
TACP and THI warrant this product and its parts against defects in materials or
workmanshipforaperiodofone(1)yearafterthedateoforiginalretailpurchase.
During this period, TACP and THI will repair or replace a defective part, at their
option, with a new or refurbished part, without charge to you. TACP/THI
Authorized Service Station personnel will come to your home when warranty
service is required. Depending on the type of repair required, the service will
either be performed in your home or the set will be taken to the TACP/THI
AuthorizedServiceStationforrepairandreturnedtoyourhomeatnocosttoyou.
Your Responsibility
The above warranties are subject to the following conditions:
(1) You must retain your bill of sale or provide other proof of purchase.
(2) All warranty servicing of this product must be made by an Authorized
TACP/THI Service Station.
(3) These warranties are effective only if the product is purchased and
operated in the U.S.A.or Puerto Rico.
(4) Labor service charges for set installation, set up, adjustment of customer
controlsandinstallationorrepairofantennasystemsarenotcoveredbythis
warranty. Reception problems caused by inadequate antenna systems are
your responsibility.
(5) Warranties extend only to defects in materials or workmanship as limited
above and do not extend to any product or parts which have been lost or
discarded by you or to damage to products or parts caused by misuse,
accident, damage caused by Acts of God, such as lightning or fluctuations
in electric power, improper installation, improper maintenance or use in
violation of instructions furnished by us; or to units which have been
modified or had the serial number removed, altered, defaced or rendered
illegible.
Limited Two (2) Year Warranty of Picture Tube
TACP and THI further warrant the picture tube in this product against defects
inmaterialsorworkmanshipforaperiodoftwo(2)yearsafterthedateoforiginal
retail purchase. During this period, TACP and THI will repair or replace a
defective picture tube, at their option, with a new or refurbished picture tube
without charge to you, except that if a defective picture tube is replaced after one
(1) year from the date of the original retail purchase, you pay labor charges
involved in the replacement.
Rental Units
The warranty for rental units begins with the first rental or thirty (30) days from
the date of shipment to the rental firm, whichever comes first.
Commercial Units
Products sold and used for commercial use have a limited ninety (90) day
warranty for all parts, labor and picture tube.
How to Obtain Warranty Service
Ifafterfollowingalloftheoperatinginstructionsinthismanualandcheckingthe
section “BEFORE CALLING SERVICE PERSONNEL”, you find that service
is needed;
In the Continental United States contact:
(1) Call the TACP toll free number 1-800-631-3811 after you find a defective
product or part to find the nearest TOSHIBA Authorized Service Station.
(2) Please present your bill of sale or other proof to the Authorized Service
Station.
Toll Free
1-800-631-3811
“TACP/THI Authorized Service Station personnel will come to your home
whenwarrantyserviceisrequired. Dependingonthetypeofrepairrequired,
the service will either be performed in your home or the set will be taken to
the TACP/THI Authorized Service Station for repair and returned to your
home at no cost to you.”
In Hawaii contact:
Toshiba Hawaii, Inc. 327 Kamakee Street, Honolulu, Hawaii
96814 (808) 591-8377
A
All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration
of the limited warranties set forth above. With the exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and in
lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no
event shall TACP or THI be liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these warranties in any manner whatsoever. The time within
which action must be commenced to enforce any obligation of TACP or THI arising under this warranty or under any statute, or law of the United States or any
state thereof, is hereby limited to 90 days from the date you discover or should have discovered, the defect. This limitation does not apply to implied warranties
arising under state law.
This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Some states do not allow limitation on how
long an implied warranty lasts, when an action may be brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may
not apply to you.
ATTENTION CANADIAN CONSUMERS:
Canadian consumers are requested to complete the special Canadian “Warranty Registration Form” enclosed, and forward this completed form
with a copy of bill of sale to TOSHIBA OF CANADA to “Register and Validate” their warranty.
Products purchased in the U.S.A. and used in Canada are not covered by these warranties.
Products purchased in Canada and used in the U.S.A. are not covered by these warranties.
Rev. 09-01-98
35
Download from Www.Somanuals.com. All Manuals Search And Download.
TOSHIBA AMERICA CONSUMER PRODUCTS, INC.
HEAD OFFICE/82 TOTOWA ROAD, WAYNE, NEW JERSEY 07470
FACTORY SERVICE CENTER/ 1420B TOSHIBA DRIVE, LEBANON, TENNESSEE 37087
TOSHIBA HAWAII, INC.
HEAD OFFICE/327 KAMAKEE STREET, HONOLULU, HAWAII 96814, U.S.A.
TOSHIBA OF CANADA LTD.
HEAD OFFICE/191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA TEL: (905) 470-5400
SERVICE CENTERS/TORONTO: 191 McNABB STREET, MARKHAM, ONTARIO, L3R 8H2, CANADA TEL: (905) 470-5400
MONTREAL: 1643, NORTH SERVICE RD., TRANS-CANADA HIGHWAY, DORVAL QUEBEC, H9P 1J1, CANADA
TEL: (514) 856-4100
VANCOUVER: 22171 FRASER WOOD WAY, RICHMOND, B.C., V6W 1J5 TEL: (604) 303-2500
MANUFACTURED BY
TOSHIBA AMERICA CONSUMER PRODUCTS, INC.
PRINTED IN USA
(00-05)B
23563899
Download from Www.Somanuals.com. All Manuals Search And Download.
|