Blu-ray Disc
™
Player
BDX1200KU
Owner’s Manual
TM
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
1 Important
3. Heed all warnings.
4. Follow all instructions.
Safety and important notice
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The important note is located on the rear or
bottom of the cabinet.
12. Use only with the cart,
stand, tripod, bracket, or table
specified by the manufacturer,
or sold with the apparatus.
When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
The lightning flash with arrowhead symbol, within
anequilateral triangle, is intended to alert the user of the
presence of uninsulated 'dangerous voltage' within the
product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to people.
14. Refer all servicing to qualified service personnel
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.
The exclamation point within an equilateral triangle is
intended to alert the user of the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
Additional Safety Instructions
15. Do not overload wall outlets; extension cords, or
integral convenience receptacles as this can result in a risk
of fire or electric shock.
The symbol for CLASS II (Double Insulation)
16. Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be
placed on the apparatus.
17. Keep your fingers well clear of the disc tray as it is
closing. Neglecting to do so may cause serious personal
injury.
18. Do not place a heavy object on or step on the
apparatus. The object may fall, causing serious personal
injury and serious damage to the apparatus.
19. Do not use a cracked, deformed or repaired disc
These discs are easily broken and may cause serious
personal injury and apparatus malfunction.
20. If the apparatus should smoke or smell, immediately
disconnect the power cord from the wall outlet. Wait until
the smoke or smell stops, then ask your dealer for a check
and repair. Neglecting to do so may cause fire.
21. While it is thundering, do not touch the connecting
cables or the apparatus.
ENERGY STAR® qualified DVD. Products that earn the
ENERGY STAR prevent green house gas emissions by
meeting strict energy efficiency guidelines set by the U.S.
Environmental Protection Agency and the U.S. Department
of Energy. ENERGY STAR and the ENERGY STAR mark are
registered U.S. marks.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT
INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET.
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET
POUSSER JUSQU'AU FOND.
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS
AND INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL
AND THOSE MARKED ON THE UNIT. RETAIN THIS
BOOKLET FOR FUTURE REFERENCE.
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
22. Warning: To prevent the spread of fire, keep candles
or other open flames away from this product at all times.
CAUTION:
- This Player employs a Laser System.
- To ensure proper use of this product, please read this
owner’s manual carefully and retain for future reference
Should the unit require maintenance, contact an authorized
service location.
- Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
- To prevent direct exposure to laser beam, do not try to
open the enclosure.
Notice for Trademark
- Visible and invisible laser radiation when open and
interlocks defeated.
DO NOT STARE INTO BEAM.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
FCC NOTICE:
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rule.
LLC in the United States and other countries.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is
no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
BONUSVIEW ™
Blu-ray Disc™, Blu-ray™, BD-Live™,
BONUSVIEW™, and the logos are
trademarks of the Blu-ray Disc Association.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D
symbol are trademarks of Dolby
Laboratories.
Changes or modifications made to this equipment, not
expressly approved by Toshiba, or parties authorized by
Toshiba, could void the user's authority to operate the
equipment.
Be aware that this equipment is still powered when in
standby mode. To disconnect this equipment completely
from the mains power, pull out the power plug from the
wall outlet.
The mains plug is used as the disconnect device, the
disconnect device shall remain readily operable.
Manufactured under license under U.S.
Patent #’s: 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,226,616;
6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 & other U.S. and
worldwide patents issued & pending. DTS and the
Symbol are registered trademarks, & DTS-HD,
DTS-HD Master Audio | Essential and the DTS
logos are trademarks of DTS, Inc. Product includes
software. © DTS, Inc. All Rights Reserved.
Note about Recycling
This unit’s packaging materials are recyclable and can be
reused. Please dispose of any materials in accordance with
your local recycling regulations.
Batteries should never be thrown away or incinerated but
disposed of inaccordance with your local regulations
concerning chemical wastes.
‘AVCHD’ and the ‘AVCHD’ logo are
trademarks of Panasonic Corporation and
Sony Corporation.
Copyright notice
This product incorporates copyright
protection technology that is protected by U.S. patents
and other intellectual property rights. Use of this copyright
protection technology must be authorized by Rovi
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Rovi
Corporation. Reverse engineering or disassembly is
prohibited.
‘DVD Video’ is a trademark of DVD Format/Logo
Licensing Corporation.
Oracle and Java are registered trademarks of
Oracle and/or its affiliates. Other names may
be trademarks of their respective owners.
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Your Product
Blu-ray™ discs that
Region
can be played
Regions Codes
North America,
Central America,
South America,
Korea, Japan, Taiwan,
Hong Kong and
South East Asia.
Both the Blu-ray Disc™ Player and the
discs are coded by region. These regional
codes must match in order to play the disc.
If the codes do not match, the disc will not
play.
The Region Number for this Blu-ray Disc™
Player is described on the rear panel of the
Blu-ray Disc™ player.
Europe, Greenland,
French territories,
Middle East, Africa,
Australia and
Region
New Zealand.
DVD discs that
can be played
U.S.A. and
Canada regions
ALL
ALL
ALL
ALL
ALL
ALL
1
2
3
4
5
6
India, China, Russia,
Central and
South Asia.
U.K.,
Europe regions and
Japan
Asia Pacific,
Taiwan, Korea
Feature highlights
High-Definition entertainment
Watch high-definition content disc with
HDTV (High Definition Television). Connect
it through a high speed HDMI cable (1.3 or
category 2). You can enjoy excellent picture
quality up to 1080p resolution with the
frame rate of 24 frames per second with
progressive scan output.
Australia,
New Zealand,
Latin America
Russia and
India regions
BD-Live™
Connect this player to the movie studios
website via the LAN jack to access a variety
of up-to-date content (e.g. refreshed
previews and exclusive special features).
China, Calcos Islands,
Walls and Futuna
Islands
Blu-ray Disc™ Java
Blu-ray Disc™ Java (BD-J) Application
The BD-ROM format supports Java for
interactive functions. “BD-J” offers content
providers almost unlimited functionality
when creating interactive BD-ROM titles.
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Main Unit
8
7
6
5
4
3
2
1
NO
a
b
c
d
e
f
g
h
Control
1
Function
Turns the power on or restores the unit to the standby mode.
Playback/Pause.
B/X
x
Stop play.
Open or close the disc compartment.
Connect a USB flash drive.
Z
USB jack
Display panel
IR Sensor
Disc compartment
Show information about the current status of this unit.
Point the remote control at the IR sensor.
Loads a disc into the disc drive.
5
1
2
3
4
6
NO
a
Control
Function
Connects to a standard AC outlet.
AC power cord
COAXIAL jack
b
Output digital audio signals when connecting the coaxial digital cable.
ANALOG AUDIO OUTPUT
jacks
c
Outputs audio signals to a connected TV or AV amplifier.
d
e
f
VIDEO OUTPUT jack
HDMI OUTPUT jack
LAN jack
Output video signals to a connected TV.
Outputs video/audio signals to a connected TV, monitor or AV amplifier.
Connect to a TV, monitor or AV amplifier equipped with HDMI input.
Use this to connect to a network with an always-on broadband connection. It is
reserved for future usage of BD-Live™.
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
REMOTE SIGNAL EMITTER
• Point remote control to the sensor on
the front panel
ON / STANDBY
To switch the Blu-ray Disc™ Player to ON or
standby mode
•
OPEN/CLOSE
• Open/ Close the disc tray
SETUP
AUDIO
Enters or exits the system setup menu
• To select the sound stream; press
repeatedly to select different audio
streams available in your disc
MC(Media Center)
To open/close Media Center
•
SUBTITLE
PIP AUDIO
• To display subtitle; press repeatedly
to select different subtitles available
in your disc
Switch the secondary audio
of secondary video(PIP) to on or off
SEARCH
ANGLE
• To search a title, chapter track or
,
Switch the camera angle during playback
•
playing time
HDMI
CLEAR
•
To clear an entry or the bookmark and program you set
To change resolution of HDMI video
REPEAT
output to fit TV. Such as 1080p,
•
Selects various repeat mode.
1080i… etc.
REPEAT A-B
PREV & NEXT
• To repeat from A to B
•
Skip to previous/next chapter/ title/track
PIP (Picture in Picture)
STOP
• Switch on or off the secondary video
Stop playback
•
/
Instant replay/instant search
F.R & F.F
Fast reverse/ fast forward
RETURN
PLAY/PAUSE
•
Return to previous menu
• Start/Pause playback
POP MENU/MENU
PROGRAM
• To display a menu included on many
Blu-ray Disc™/DVD video discs
To access program list.
•
BOOKMARK
TOP MENU
To bookmark at any point during playback
•
• To display the disc title during playback
DISPLAY
ZOOM
• To display a window to locate a title,
chapter or track
To zoom out/in
•
DIGEST
To access JPEG thumbnail
view during playback
OK
•
• Acknowledge/ Confirm menu selection
Number Buttons
• Navigation/ Cursor buttons for moving
to the left / right / up / down
Select numbered items in a menu
Press to enter track/ chapter/ title
numbers/password directly
• Press
during JPEG playback to rotate the
current photo track, but the JPEG playback
will be paused
Do a slow forward during normal
playback
•
•
Advance the picture frame by
frame during pause mode
ꢀꢀꢀ
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Connections
Make the following connection to use this
product.
Option 2: Connect to the HDMI Jack
This type of connection provides better
picture quality.
Connecting to a TV
Connect the product to TV to view disc play.
Select the best video connection that TV
can support:
Option 1: Connect to the composite video
jack (VIDEO)
HDMI IN
Option 2: Connect to the HDMI Jack
1. Connect a HDMI cable from the HDMI
output jack on this product to the HDMI
input jack on the TV.
Option 1: Connect to the composite
video jack (VIDEO)
You can connect this product to a TV
through the composite video cable which
provides standard picture quality.
AUDIO IN
Notes:
– If the TV has a DVI connector only, connect via
an HDMI/DVI adapter (not included). Connect
an audio cable for sound output.
VIDEO IN
– You can opꢀmize the video output by pressing
the HDMI buꢁon repeatedly to select the best
resoluꢀon which the TV can support.
– When the player is connected to both VIDEO
OUTPUT jack and HDMI OUTPUT jack, resoluꢀon is
set to 720p/1080i/1080p, there will be no video
output through VIDEO OUTPUT jack.
1. Connect a composite cable from the
VIDEO OUTPUT jack and analog AUDIO
OUTPUT jacks on this product to the video
input jack (yellow) and audio input
jacks (white/red) on the TV.
Note:
-Connect this unit directly to the TV. If the
composite Audio / video cables are connected
to a VCR, pictures may be distorted due to the
copy right protecꢀon system.
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Connect USB device
Optional Connection
A USB device provides an additional memory
to software upgrade and enjoy BD-Live™
bonus content.
You can also enjoy playing back MP3/JPEG/
MPEG4 files stored in the USB flash device.
Option 1: Connect to the digital amplifier⁄
receiver
Option 2: Connect to an analog stereo
system
Option 3: Connect to network
Option 1: Connect to the digital
amplifier/receiver
Route the sound from this player to other
device to enhance audio output.
1. Connect the USB Flash device to the USB
jack on this product.
Notes:
DIGITAL AUDIO
INPUT
COAXIAL
- Connect only a USB Flash device to the USB
jack on this product.
- To enjoy BD-Live™ bonus content, as your local
storage, use a 1 GB or larger USB
memory.
- TOSHIBA does not guarantee 100%
compaꢀbility with all USB Flash devices.
1. Connect a coaxial cable from the
COAXIAL jack on this product to the
Connect Power
COAXIAL jack on the device.
1. Connect the AC power cable to:
- the wall socket.
• The product is ready to be set up for use.
Notes:
Option 2: Connect to an analog
stereo system
AUDIO IN
– Before connecꢀng the AC power cord, ensure you
have completed all other connecꢀons.
– Risk of product damage! Ensure that the power
supply voltage corresponds to the voltage printed
on the back of the unit.
– The type plate is located on the back of the unit.
1. Connect the audio cable from the
analog AUDIO OUTPUT jacks on this
product to the audio input jacks on the
system.
Option 3: Connect to network
Connect this product to the network to
enjoy BD-Live™ bonus content.
1. Connect the network cable from the
LAN jack on the product to the LAN jack
on the network system.
ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Preparation
Setting up the player
Always follow the instructions in this chapter
in sequence.
Find the correct viewing input
Note:
- Use of controls or adjustments or
performance of procedures other than herein
may result in hazardous radiaꢀon exposure or
other unsafe operaꢀon.
1. Press 1 to turn on this product.
2. Turn on the TV and switch to the correct
video-in input (refer to the TV user manual
on how to select the correct input).
Initial Setting
Prepare the remote control
When you turn on this unit for the first time,
you need to follow these steps.
1. A welcome page will be displayed when
this product is powered on.
2. Press OK to enter language setting.
3. Select your desired language,
resolution and aspect ratio using /, then
press OK.
4. Press SETUP to exit the Setup menu.
1. Open the battery compartment.
2. Insert two R03 (AAA Size) batteries with
correct polarity (+/-) as indicated.
3. Close the battery compartment.
Notes:
- If you are not going to use the remote control
for a long ꢀme, remove the baꢁeries.
- Do not use old and new or different types of
baꢁeries in combinaꢀon.
Use the SETUP menu
1. Press SETUP to display the Setup menu
when the Blu-ray Disc™ Player is playing or
no disc. And press SETUP to exit the Setup
menu.
Tip:
- When playing high-definiꢀon sources, you must press
STOP buꢁon to enter SETUP interface.
- Risk of explosion! Keep baꢁeries away from
heat, sunshine or fire. Never discard baꢁeries in
fire.
Select menu display language
1. Press SETUP, [General Setting] menu
is displayed.
• The maximum operable ranges from
the unit are as follows.
2. Select [Language], then press .
3. Select [OSD], then press .
- The language options may vary for
different regions.
4. Press / to select a language, then
press OK.
- Line of sight: approx. 10 m
- Either side of the centre: approx. 7 m
within 30°
- Above: approx. 7 m within 30°
- Below: approx. 7 m within 30°
Note:
- If this disc player is connected to a HDMI®-
CEC compliant TV, skip this setting. It switches
automatically to the same OSD menu language
as per your TV setting.
7 m
10 m
7 m
10
Download from Www.Somanuals.com. All Manuals Search And Download.
sequence:
2X, 4X, 8X, 16X, 32X
5 Playback
2. Press B/X to resume playback.
3. Press F.R m to fast reverse through the
disc. The fast reverse speed changes based on
how many times you pressed the button.
The speed will increase through the
following sequence:
Playback Functions
Basic Playback
1. Press button on the front panel or the
remote control, your Blu-ray Disc™ player
will turn on.
2X, 4X, 8X, 16X, 32X
4. Press B/X to resume playback.
The unit will take around 20 seconds to
warm up.
Instant Search and Instant Replay
2. Turn on the TV, and then select the input
setting on the TV that matches the
connection method you used to connect your
player.
3. Press OPEN/CLOSE Z to slide out the disc
tray.
1. During playback, press and hold Mbutton,
you can search 30 seconds forward.
2. During playback, press and hold m
button, you can instant replay the content
from 10 seconds before.
4. Place a disc on the disc tray with the label
facing up and then press OPEN/CLOSE Z to
slide back and close the disc tray.
The disc loading time depends on the types
of disc you are loading, and loading a Blu-ray
Disc™ will take longer time.
5. If the disc does not start playing
automatically, please press B/X to start
playback.
Previous and Next
During playback, press PREV . button,
and you can skip back to the previous
chapter or track. Each press of this button
will allow you to skip a chapter or track till
the beginning of the disc.
Press of NEXT > button during playback
will allow you to skip the playback to next
chapter or track.
6. If a Blu-ray Disc™ or DVD menu displays,
use cursor buttons to select PLAY. Then,
press OK to confirm.
Slow Forward
7. To eject the disc, press OPEN/CLOSE Z.
1. Press =B during normal playback. The slow
forward speed is 1/16 in default.
2. To change slow forward speed, press =B
repeatedly, and the slow forward speed will be
changed in the following sequence: 1/16, 1/8,
1/4, 1/2, normal.
Pause playback
1. Press B/X to pause playback. The
sound will be muted.
2. Press B/X to resume the playback.
3. To exit slow forward mode and return to
normal playback, press B/X.
Stop playback
Step Forward
1. Press STOP button once to go to resume
mode, the TV screen will show the resume logo.
2. Press STOP twice to stop the playback
completely.
3. Press B/X to resume playback from the
point where playback is stopped or from the
beginning of the disc after the playback is
completely stopped.
Use this feature to help you to enjoy the
video frame by frame.
1. Press B/X during normal playback,
then playback will change to pause state.
2. Press =B repeatedly to advance the
picture frame by frame.
3. Press B/X to resume normal playback.
Not all Blu-ray™ discs support the resume
feature.
HDMI
When there is file or disc being played, it is
not allowed to switch resolution through
the HDMI button of the Remote Control.
Fast Forward and Fast Reverse
1. Press F.F M to fast forward through the
disc. The fast forward speed changes based on
how many times you pressed the button. The
speed will increase through the following
11
Download from Www.Somanuals.com. All Manuals Search And Download.
current number of angle, and the second “X”
indicates total number of angle.
Not all Blu-rayTM or DVD has the multi-angle
feature. The screen will take around 5
seconds to change.
Advanced Playback
DISPLAY
Press this button and the screen will display
some information about disc, such as: Title
number, Chapter number, Track number,
Elapsed Time, Mode, Audio, Angle, and
Subtitle languages. Press this button again to
turn off the information display.
During DVD/CD playback, you may edit the
chapter and track.
TOP MENU
You may press this button at any time, and
the Blu-ray Disc™ or DVD video disc
playback will pop up the disc menu.
POP MENU/MENU
During Blu-ray DiscTM playback, press POP
MENU/MENU to display the disc title, and the
playback will not be stopped even the menu
is on the screen.
REPEAT
Press REPEAT repeatedly to select different
repeat modes.
1. Press the /// buttons to select an
option, then press OK to confirm.
2. Press POP MENU/MENU to close the
menu.
During DVD playback, press POP MENU/
MENU to open the disc menu.
DuringVCDplayback, pressPOPMENU/MENU
to switch PBC On/Off.
During displaying USB and Data Disc file
content in media center, press POP MENU/
MENU to add the Photo/Music/Video files to
the playlist.
DVD:Repeat Chapter, Repeat Title, and All.
VCD PBC Off/CD/JPEG/MP3:Repeat Track and
All.
A-B
To play certain section within the video or
song, press A-B button to set the start-point.
Then press A-B button again to set the end
point and complete the setting. The selected
section will be played repeatedly.
Press A-B button the third time to cancel this
function.
The end point cannot be set until 5 seconds
of playback has elapsed from the start point.
SEARCH
During playback, press SEARCH button to
edit Title, Chapter, and Time.
Press / and OK button on the remote
control to select Title, Chapter, or Time. Then
press the numeric buttons or / and then
press OK. The playback will skip to the
desired location.
1. Press /// buttons to select an
option under the Photo/Music/Video files.
2. In the file browser, press to select the
file(s) to be added to the playlist. "√ "
will appear beside the selected files.
3. Press POP MENU/MENU button, a pop up
menu will appear, then press / and OK
button to select "Add to Playlist" to add the
files to the Playlist. "Select all" and "Clear all"
options are also available. Select "Cancel" to
exit the pop up menu.
For Time Search, press / to select Title
or Chapter time search.
SUBTITLE
All the selected files will be added to the
"Playlist" folder. You can play or delete the
files in the playlist.
Press this button repeatedly and the screen
will display “X/XX XXX” or “Off”. The “X”
indicates the current number of this
language; “XX” indicates the total number of
language; “XXX” indicates the language.
The number of available languages depends
on the disc.
Press POP MENU/MENU to delete the
selected files in"Playlist"
SETUP
Press the SETUP button, and the screen will
display some information about the player,
such as:
• General Setting
RETURN
• Display Setting
Press this button to return to the previous
on-screen menu in setup menu such as
External Memory Information, Parental
Control, Country Code, etc.
• Audio Setting
• System Information
PROGRAM
During CD/DVD/VCD playback, you can press
this button to edit the sequence of the
playlist.
During MP3/JPEG/VIDEO playback, press
RETURN once, it will return back to Media
Center page.
BOOKMARK
During VCD disc playback and PBC On is
selected, press the button to return to PBC
Menu.
During VCD/DVD disc playback, press
the BOOKMARK button to add the
bookmark; press and hold for a few
seconds to display the list of bookmark
which you added before on the screen,
then you can press the OK button to select
the bookmark or CLEAR button to delete
the bookmark.
ANGLE
During playback, press this button to change
the angle of the picture. The screen will
display “Angle X/X.” The first “X” indicates the
1ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
[Subtitle Style]: When you play the Blu-ray Disc™ or
DVD disc and if it has external subtitle, you will see it
in OSC menu.
[Bitrate]: Use/ toselectyourdesiredBitrate.
[Still Off]: Close the Still feature of DVD disc.
For some DVD discs, a certain video picture will be
frozenasastillpictureduringtheprocessofplayback
to let the user has a better view of certain picture. To
continue playback, select Still Off.
AUDIO
Press AUDIO button on the remote control to
select the audio streams that set within the
Blu-rayTM or DVD disc.
The screen will display:
AUDIO: X / XX XXX XXXX
“X” - the Current Audio Stream Number
“XX” - The total number of Audio Stream
“XXX” - Audio Language
[Ins Search]: Instant search 30 seconds forward.
[Ins Replay]: Replay the content from 10 seconds
before.
“XXXX” - Audio Technology
MC
Press this button to play media files in the USB.
ZOOM
Tip:
-
The specified operaꢀon for each item will vary with
Press ZOOM button repeatedly to Zoom in/out
playback in the video.
disc types. And some items are available only when
the disc is supportable.
Zoom mode : Zoom 2x -> Zoom 3x -> Zoom
4x -> Zoom 1/2 -> Zoom 1/3 -> Zoom 1/4.
DIGEST
Blu-ray Disc™ BONUSVIEW™
During playback of JPEG disc, press DIGEST
to view a page of 12 thumbnail images.
- Use /// to select an image.
Press OK to view the selected image in full-
screen and subsequent images will be
displayed one after another automatically.
Playing Secondary Video (Picture-in-Picture) and
Secondary Audio is for Blu-ray Disc™ only.
Secondary video can be played from a disc
compatible with the Picture-in-Picture (PIP) function.
For the playback method, refer to the instructions
for the disc.
1. Turn on secondary video by pressing the PIP
button.
2. Press the PIP AUDIO button to select the
secondary audio, and select an option except Off.
The secondary audio is opened, you can hear the
disc secondary video sound.
- Press PREV /NEXT
to view the
previous or next thumbnail screen.
PIP AUDIO
Press PIP AUDIO button to open the
secondary audio of secondary video(PIP’s
sub-window video).
OSC
In order to hear the secondary audio, the PIP
feature on the disc must be turned on.
3. Press the PIP button again to turn off the
Press OSC to open On Screen Control menu
during playback. In this menu, you can make
some playback-related control.
secondary video.
The on screen control contains following
items:
Primary video
[Title]: The title in current playback/titles in
total. Select your desired title to playback.
[Chapter]: The chapter in current playback/
chapters in total. Select your desired chapter
to playback.
[Time]: View the elapsed/remaining playback
time of title/chapter. Use / to view: the
elapsed playback time of title, the remaining
playback time of title, the elapsed playback
time of chapter, and the remaining playback
time of chapter.
Secondary video
with Secondary Audio
This function is not available when the primary
video is played in Search, Slow-Motion, or Frame-
by-Frame or Fast Forward/ Reverse mode.
To listen to the secondary audio, the digital audio
output must be set to "Bitstream",
"Re-encode" or "PCM". Otherwise, only the primary
audio can be heard.
[Mode]: Select playback mode among
shuffle, random, and normal.
[Audio]: The Blu-ray DiscTM/DVD disc’s
soundtrack language. Use / to view the
audio available in the disc and select your
desired Audio type.
[Angle]: The angle view of current playback/
the angles in total. Please reference
Playback > Angle to see more detailed info.
Use / to select your desired angle view.
[Subtitle]: The Subtitle in current playback.
Use / to view the subtitles available in
the disc and select your desired subtitle type
or turn it off.
Notes:
- Not all the Blu-ray™ discs can support this
funcꢀon.
- High Definiꢀon PIP (Second Video) is not
supported.
1ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Electronics Control) protocol. You can
use one single remote control to control
all REGZA-LINK-compliant devices that
are connected through HDMI
connectors.
{On} - Turns on REGZA-LINK features.
- With CEC on, during TV standby with
the Blu-ray Disc™ Player on, pressing
SETUP, PLAY/PAUSE will power on the
TV. When you turn the TV off, this unit
will automatically turn off.
6 Customizing
This section describes the various setting
option of this Blu-ray Disc™ player.
If the setup option is grayed out, it means
the setting cannot be changed at the
current state.
General Setting
1. Press SETUP button on the remote
control. The Setup Menu appears.
{Off} - Disables REGZA-LINK features.
[Load Default]
•
Reset all settings of Blu-ray Disc™ Player
to initial default state.
- Follow the instruction on the TV screen
to confirm the default setting operation.
1. Select Load Default.
General Setting
Screen Saver
Disc Auto Playback
CEC
On
System
On
Language
Playback
Security
Network
On
Load Default
Upgrade
More...
More...
2. A dialog box pops up shown as
below. Select OK.
Move cursor key to select menu option
then use “OK” key to select
SETUP Exit
Load Default
2. Press to select an option, then press
to access.
Do you want to load default?
Cancel
3. Press / to select a setup option and
press .
4. Select the setting you wish to change
and press OK to confirm.
3.It may take awhile when loading
default is in progress. Please wait...
Load Default
- Press to return to the previous menu.
[System]
Loading default, please wait...
30%
To change the following system option to
personalize your Blu-ray Disc™ player.
•
[Screen Saver]
4. TV will display as follow:
Turn On or Off the screen saver mode.
It helps to protect the TV screen.
{ On } – Set the screen saver active
after approximately 5 minutes with no
operation. You can turn off the screen
saver by pressing the SETUP button.
- The Blu-ray Disc™ Player will switch to
standby mode if there is no operation
after the screen saver is engaged for
approximately 15 minutes.
Welcome
to the Toshiba Blu-ray Disc Player Setting
Wizard.
Some simple settings are suggested before you
begin. You can also access detailed settings
from the Setup Menu.
OK
Next
5. Press OK, enter language setting.
Press/ to select a language option.
{ Off } – Turn off the screen saver
mode.
[Disc Auto Playback]
Turn On or Off the disc automatic
playback switching mode.
{On} – The disc playback automatically
after loading.
{Off} – Turn off disc auto playback
mode.
[CEC]
Choose
English
Français
Español
an OSD language before starting.
The language selected will be applied not only
here but also in other OSD windows, menus
etc.
•
•
Previous
OK
Next
This player supports REGZA-LINK which
uses the HDMI®-CEC (Consumer
1ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Press OK, enter Resolution setting.
- The system will reboot after 5 seconds or
OK key is pressed.
Notes:
Auto
480i
Choose
a resolution that fits your TV.
Change will be applied immediately, you have
15s to determine whether to save the setting
or rollback to prior resolution. Better
performance will be provided by an HDMI
connection!
480p
720p
1080i
1080p
- If set [Disc Auto Playback]to [Off], aſter you
insert the disc that contains the upgraded
informaꢀon to upgrade system, you have to start
upgrade from this opꢀon of SETUP Menu.
- If the upgrade file package did not pass the
verificaꢀon, error prompt is displayed , check the
package again (such as the package is not
complete)
Previous
OK Next
Press / to select an option. Press OK.
Select "Yes" or "No" using /.
Note:
-When the player is connected to both VIDEO
OUTPUT jack and HDMI OUTPUT jack, resoluꢀon is
set to 720p/1080i/1080p, there will be no video
output through VIDEO OUTPUT jack.
- Make sure the firmware version is not an old
version.
- When you upgrade the system using USB Flash
device, you should make a new folder named
UPG_ALL, and copy the upgrade file into this
folder.
Resolution
has been changed!
14s
Yes
No
Does everything looks all right with this
resolution? Press Yes if you want to apply it.
Press No to rollback to previous one.
• [External Memory]
External Memory would be used in BD-
Live™ function. When you plug in the
USB flash device which has at least 1GB
free space to play BD-Live™ function,
the Blu-ray Disc™ system would make a
directory named BUDA automatically.
Information will display the Free size.
1. Press OK.
Previous
OK
Next
7. Press OK, enter Aspect ratio setting.
Choose
an aspect ratio that fits your TV.
16:9 Full
16:9 Normal
4:3 Pan&Scan
The change will be applied in the next page.
Determine whether to save the setting or
rollback to the previous aspect ratio.
4:3 Letterbox
2. Follow the instruction on the TV
screen to select {Information}.
General Setting
OK
Next
Previous
Information
System
Press / to select an option. Press OK.
Language
Playback
Security
Network
Free size is : 0MB
Setting
Erase
wizard is complete!
Now press the OK button to finish and return
to the Setup Menu.
Move cursor key to select menu option
then use “OK ” key to select
RETURN Return
3. Press OK to select "Erase", the data
in the BUDA folder will be cleared.
[Language]
Set up the OSD (On-Screen Display),
Menu, Audio and Subtitle default language
for the player.
Previous
OK Finish
8. Press OK to return to [General Setting]
Menu.
[Upgrade]
•
For software upgrades to enhance
performance, you could select the
following upgrade method and start to
upgrade.
{Disc}/{USB Storage}
Upgrade the software from the disc or USB
Flash device.
General Setting
OSD
English
English
English
English
System
Menu
Audio
Subtitle
Language
Playback
Security
Network
Move cursor key to select menu option
then use “OK ” key to select
Exit
SETUP
1. Insert the disc or connect the USB Flash
device which contains the upgrade file
package.
2. Follow the instruction on the TV
screen to confirm upgrade operation.
• [OSD]
Select the default on-screen display language.
•
[Menu]
Select the default menu language.
1ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
{On} – Display playback control menu, use
NUMBER keys to select desired option.
{Off} – Hide playback control menu and
• [Audio]
Select the default audio language.
• [Subtitle]
start playback from track1 automatically.
Select the default subtitle language.
[Playback]
• [Closed Caption]
General Setting
Allow people who are deaf or hearing
impaired, to have access to television
programming by displaying the audio
portion of a television programme as text
on the screen.
On
On
On
On
On
System
Angle Mark
PIP Mark
Language
Playback
Security
Network
Secondary Audio...
Last Memory
PBC
{On} – Display the Closed Caption .
{Off} – Hide the Closed Caption.
Move cursor key to select menu option
then use “OK ” key to select
SETUP Exit
[Security]
• [Angle Mark]
General Setting
Some Blu-ray discs/DVDs contain the
scenes recorded with multiple angles,
which allow you to enjoy the videos with
your desired angles, therefore the angle
mark is displayed only when the Blu-ray
Disc™/DVD disc is supportable for multi-
angle and Angle Mark is set to ON.
{On} – Display the angle mark.
{Off} – Hide the angle mark.
• [PIP Mark]
The Picture -In- Picture (PIP) mode display
two pictures on the TV screen at the same
time, the full screen picture is called Main
Window and the small inset window is
called Sub Window. The PIP mark is
displayed when in PIP mode and PIP Mark
is set to ON.
Change Password
Country Code
More...
More...
System
Language
Playback
Security
Network
Parental Control
More...
Move cursor key to select menu option
then use “OK ” key to select
SETUP
Exit
•
[Change password]
Follow the instruction on the TV set or
change the password for locked discs
and play restricted DVDs.
General Setting
Screen Save
Off
System
Change Password
Language
Playback
Security
Network
Pleaseentercurrentpassword:
Move cursor key to select menu option
then use “OK ” key to select
RETURN Return
{On} – Display the PIP mark.
{Off} – Hide the PIP mark.
Note:
-High Definiꢀon PIP (Second Video) is not supported.
• [Secondary Audio Mark]
{On} – Display Secondary Audio Mark.
{Off} – Hide the Secondary Audio Mark.
• [Last Memory]
If you open the disc tray or switch this Blu-
ray Disc™ player to standby state during
normal playback, the Blu-ray Disc™ player
can memorize the end playing point, the
player will start playback from the
memorized point next time.
{On} – Active Last Memory feature.
{Off} – Disable Last Memory feature.
Note:
- Not all the Blu-ray™ discs can support this
funcꢀon.
[PBC]
VCD2.0hasPBCcontrol(PlaybackControl)
menu, which allow you to interact with
the system via menu.
1. Use NUMBER keys to enter four digit
old password. The default password
is "0000".
2. Enter the new password
General Setting
Screen Save
Off
System
Change Password
Language
Playback
Security
Network
Newpassword:
Confirm password :
Move cursor key to select menu option
then use “OK ” key to select
RETURN Return
3. Enter the new password again to confirm.
• [Country Code]
This ensures that you will be able to see
the scenes intended for your current
residential Country/Area.
Use NUMBER Keys to enter your
password, then you can choose your
Country/Area.
•
[Parental Control]
•
Restricts access to discs that are
unsuitable for children. These discs must
be recorded with rating.
1ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
[Manual] to input IP Address, Subnet
Mask, Default Gateway, DNS and press
OK to re-connect again to the network.
It will try to obtain the IP address again.
4. Press RETURN or press OK to exit.
Notes:
-During[Manual]mode, ifthenumberisentered
incorrectly, presstoerasethenumber.
-Acontractwiththeproviderisneededtoconnectto
theInternet.
-Thisplayerdoesnotsupportautomaꢀcdetecꢀonof
cross-cables. Usethestraight(standard)LANcable.
-LoadingBD-Live™contentfromtheinternetmay
takesomeꢀme, dependingonthefilesizeandthe
speedoftheinternetconnecꢀon.
1. Press OK.
2. Use NUMBER keys to enter the
password.
General Setting
ScreeSave
Of
System
Parental Control
Language
Playback
Security
Network
Enter password:
Move cursor key to select menu option
then use “OK ” key to select
Return
RETURN
3. Select a rating level, then press OK.
General Setting
Screen Save
Off
System
Parental Control
Language
Playback
Security
Network
Select level:
Off
[1] KID SAFE
[2] G
•
[IP Setting]
{Auto} – Auto obtain network information.
{Manual} – Manual setup network
information.
[Connection Test]
Display Network connection status
information.
Off
Return
RETURN
Items
Description
•
•
KID SAFE Safe for kids
G
All children and general guidance
Parental guidance
[BD-Live Connection]
PG
{Permitted} – During playback of BD-
Live™ disc, the disc may automatically
download all information from appointed
network.
PG-13
PGR
R
Parental guidance for children under 13
Parental guidance Recommended
Restricted viewing
NC-17
ADULT
No one 17 and under allowed
Adult only
{Partial Permitted} – During
playback of BD-Live™ disc, the disc may
automatically download partial of the
information from appointed network.
{Prohibited} – Disable downloading
information from network.
[Information]
Notes:
- Rated discs above the level you set in [Parental
Control] require a password to be entered.
- The raꢀngs are country-depended. To allow all
discs to play, select 'Off'.
•
Display all Network Information.
[Network]
General Setting
Display Setting
System
IP Setting
Language
Playback
Security
Network
Connection Test
BD-Live Connecti...
Information
1. Press SETUP, [General Setting] menu
is displayed.
2. Press to select [Display Setting],
then press .
Move cursor key to select menu option
then use “OK ” key to select
SETUP Exit
3. Select an option, press to access.
Display Setting
To enjoy BD-Live™ bonus contents, set up
the network connection.
TV Screen
Resolution
16:9 Full
Auto
TV
Video Process
Motion Vide...
Note:
Color Space
YCbCr422
HDMI Deep Color
HDMI 1080/24p
- Ensure that the network cable is properly
connected and the router is switched on.
1. Connect the Blu-ray Disc™ player to
the broadband modem or router.
2. In the Setup menu, select [Network],
then press .
3. Select [IP Setting] in the menu, then
press OK to select [Auto]. An IP address
is obtained automatically.
Off
On
Move cursor key to select menu option
then use “OK ” key to select
Exit
SETUP
4. Press / to select a setup option and
press .
5. Select the setting you wish to change
and press OK to confirm.
- Press to return to the previous
menu.
If no IP address is obtained, select
- Press SETUP to exit the menu.
1ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
[TV]
• [TV Screen]
Select the screen format according to
how you want the picture to appear on
the TV.
{16:9 Full} – for a disc with the aspect
ratio of 4:3, the output video is
stretched into 16:9 full screen.
{16:9 Normal} – for a disc with the
aspect ratio of 4:3, the output video is
resized vertically to match what will be
seen on the display.
{30 bits} – Output 30 bits Color.
{36 bits} – Output 36 bits Color.
{Off} – Output standard 24 bits Color.
Note:
- When the color space is "YCbCr422", even if HDMI
Deep Color is set to 30bits/36bits, it is not output
with Deep Color.
[HDMI 1080/24p]
{On} – Enable 1080/24p video
resolution setting.
•
{Off} – Disable 1080/24p video
resolution setting.
{4:3 Pan&Scan} – for standard TV,
Display a wide picture on the entire
screen and cuts off the redundant
portions.
{4:3 Letterbox} – for standard TV,
Display a wide picture with two black
borders on the top and bottom of 4:3
screen.
Notes about HDMI 1080/24p:
If you want the 24Hz output, it should fulfill below
3 conditions:
1.TV supports the 24Hz display;
2.Player choose the 24Hz option in the setup
menu;
3.Media must be the 24Hz video.
Notes:
- This resoluꢀon becomes effecꢀve only when
the playing Blu-ray Disc™ contents are Film
source.
- During HDMI 1080/24p playback, there will
be no composite output.
•
[Resolution]
Select a video output resolution that is
compatible with your TV display
capability.
{Auto} – Select the most suitable
resolution according to the TV .
{480i}, {480p}, {720p}, {1080i},
{1080p}
[Video Process]
Display Setting
Video Adjust
Sharpness
More...
Low
TV
Video Process
– Select a video resolution setting that
is best supported by the TV. See TV
manual for details.
Motion Video...
Note:
Move cursor key to select menu option
then use “OK ” key to select
SETUP Exit
-When resoluꢀon is set to 720p/1080i/1080p:
(1) If only CVBS connected, the resoluꢀon of CVBS
video output will be set to 480i automaꢀcally.
(2) If HDMI and CVBS are both connected, there will
be no CVBS video output, instead, a message will be
shown as follows:
•
[Video Adjust]
Select a predefined setting of the video.
1. Press OK .
2. Press/ to adjust the video
Brightness, Contrast, Hue and Saturaꢀon.
{Brightness} - press / to adjust
the brightness of display, goes left
means dark and right means bright.
{Contrast} - press / to adjust
the contrast of display, goes left
means low contrast and right means
high contrast.
{Hue} - press / to adjust the Hue
of display, goes left means low hue
and right means high hue.
{Saturation} - press / to adjust
the saturation of display, goes left
means low Saturation and right means
high saturation.
Out Of Range:Check Display Resoluꢀon
•
[Color Space]
Select a predefined Color space of
picture.
{RGB} – Select RGB Color space.
{YCbCr} – Select YCbCr Color space.
{YCbCr422} – Select YCbCr422 Color
space.
{Full RGB} – Select Full RGB Color
space.
[HDMI Deep Color]
•
This feature is available only when the
display device is connected by a HDMI
cable, and when it supports deep Color
feature.
1ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press RETURN to exit.
[Audio Output]
•
[Spdif]
Brightness
Contrast
Hue
ꢀ
ꢀ
Select the output mode of COAXIAL
jack, options include Bitstream, PCM,
Re-encode and Off.
{Bitstream} – Output digital signal
without any processing.
{PCM} – Output digital signal with
processing, only two channels export.
{Re-encode} – Auto select signal type
from COAXIAL jack according to the
Audio stream on disc.
ꢀ
ꢀ
Saturation
Change
Exit
RETURN
•
[Sharpness]
Select the level of sharpness: High,
Middle, Low
{High} - Select High sharpness level
{Middle} - Select Middle sharpness
level
{Off} – No output for S/PDIF.
[HDMI]
•
Select the output mode of HDMI Out
jack, options include Bitstream, PCM,
Re-encode and Off.
{Bitstream} – Output HDMI digital
signal without any processing.
{PCM} – Output HDMI digital signal
with processing, only two channels
export.
{Low} - Select Low sharpness level
[Motion Video Process]
Display Setting
Video Mode
Standard
TV
Video Process
Motion Video...
{Re-encode} – Auto select signal type
from HDMI Out jack according to the
Audio stream on disc.
{Off} – No output for HDMI.
[Down_samp]
Select the digital audio signal sampling
frequency.
{48K} – For discs recorded at sampling
rate of 48 kHz.
{96K} – For discs recorded at sampling
rate of 96 kHz.
{192K} – For discs recorded at sampling
rate of 192 kHz.
Move cursor key to select menu option
then use “OK ” key to select
Exit
SETUP
•
[Video Mode]
Select the output mode of video, options
include: Standard, Vivid, Smooth, these
can change the output display.
{Standard} - output video signal without
any processing and in standard mode.
{Vivid} - output video signal in vibrant
color mode.
•
{Smooth} - output video signal in
smooth mode.
Audio Setting
•
[DRC]
Select the Dynamic Range Control mode
which makes it available to listen to a
movie at a low volume without losing
sound clarity.
1. Press SETUP, [General Setting] menu
is displayed.
2. Press to select [Audio Setting],
then press .
{Off} – Non-dynamic range compress.
{On} – Dynamic range compress.
{Auto} – Adjust the DRC according to
input audio.
The setting of Auto is effective for Dolby
TrueHD.
3. Select an option, press to access.
Audio Setting
PCM
Audio Output
Spdif
HDMI
PCM
48K
Off
Down_samp
DRC
Move cursor key to select menu option
then use “OK ” key to select
Exit
SETUP
4. Press / to select a setup option and
press .
5. Select the setting you wish to change
and press OK to confirm.
- Press to return to the previous
menu.
- Press SETUP to exit the menu.
1ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
System Information
1. Press SETUP, [General Setting] menu
is displayed.
2. Press to select [System
Information].
- The current software version and MAC
address will be displayed.
- Press to return to the previous
menu.
- Press SETUP to exit the menu.
System Information
Software version: V XX
MAC: E8-9D-87-XX-XX-XX
Move cursor key to select menu option
then use “OK ” key to select
Exit
SETUP
ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Specification
MP3 tracks
Playable media
• Supported file extension: '. mp3'
• Supported audio codec : MP3
• ISO format
• Supported corresponding bitrate: 8kbps-
320 kbps
This product can play:
• Blu-ray Disc™-Video, BD-R/RE2.0, BDAV
• DVD, DVD-Video, DVD+R/+RW,
DVD-R/-RW, DVD+R/-R DL (Dual Layer)
• Video CD/SVCD
• Supported sampling frequencies: 32kHz,
44.1kHz, 48kHz
• Audio CD, CD-R/CD-RW
• AVCHD, AVCREC disc
• USB flash device
JPEG
• Supported file extension: '.jpg' or ‘.jpeg'
• JPEG/ISO format
• Does not support Picture CD
Video
Signal system: NTSC
Composite video output: 1Vp-p (75
ohm).
HDMI Output: 480i, 480p, 720p, 1080i,
1080p, 1080/24p.
Main Unit
• Power supply rating:
120V, 60Hz
• Power consumption: 18W
• Power consumption in standby mode:
<1W
• Dimensions (w x h x d):
430 × 42.5 × 200 (mm)
• Net Weight: 1.52 kg
• Operating temperature: 5°C to 35°C
• Operating humidity: Less than 80 %
(no condensation)
Audio
• 2 Channel analog output
- Audio L&R : 2 Vrms (< 2.2 kohm)
Signal-to-noise Ratio ≥ 95 dB
THD+N 1kHz ≤ -85 dB
Dynamic Range 1kHz ≥85 dB
Crosstalk 1kHz ≤ -95dB
• Digital output (Coaxial):
0.5 Vp-p (75 ohm)
• HDMI output
Accessories supplied
• Remote control
• Two R03 (AAA size) batteries
• Audio/Video cable
• Owner's Manual
• QSG
LAN
• LAN terminal 10BASE-T/100BASE-TX
USB
• USB 1.1 / USB 2.0 Full-speed / USB
2.0 High-speed
• Supporting range: flash disk, card reader,
4 ports USB HUB, USB Mass Storage Class
Device.
• Supported file system: FAT32
• Maximum size supported: 32GB
• Does not support unpowered HDD
ꢀ1
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Troubleshooting
If you experience any of the following difficulties while using this unit, check the list below
before consulting your nearest TOSHIBA dealer.
Problem
Tip
No reaction to the
remote control.
Connect the product to the power outlet.
Point the remote control at the product.
Insert the batteries correctly.
Insert new batteries in the remote control.
Turn on the TV.
No video signal on the
display device.
Set the TV to the correct external input.
Select the correct video resolution.
Set TV System of TV correctly.
No video output through Set Resolution of HDMI to 480i or 480p.
VIDEO OUTPUT jack.
Incorrect or no audio /
video signal on the
amplifier/display device
via HDMI cable.
If the unit is connected to the unauthorized display device with
an HDMI cable, the audio/video signal may not be output.
Ensure the amplifier/display devices setting match the Blu-ray
Disc™ player.
No high-definition video
signal on the TV.
Does the disc contain high-definition video? High-definition
video is not available when the disc does not contain it.
Does the TV support high-definition video? High-definition video
is not available when the TV does not support it.
No audio signal from the Assign the audio input of the TV to the corresponding video
loudspeakers of the TV. input.
No audio signal from the Turn on the audio system.
loudspeakers of the
Set the audio system to the correct external input.
audio system.
Increase the volume level of the audio system.
ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Cannot play back a disc.
Make sure that the Blu-ray Disc™ player supports the disc.
Make sure that the Blu-ray Disc™ player supports the region
code of the DVD or Blu-ray Disc™.
For DVD+RW/+R or DVD-RW/-R, make sure that the disc is
finalized.
Clean the disc.
Cannot play back JPEG
files from a disc.
Make sure that the disc was recorded in the UDF, ISO9660 or
JOLIET format.
Cannot play MP3 files
from a disc.
Make sure that the disc was recorded in the UDF, ISO9660 or
JOLIET format.
Make sure that the bit rate of the MP3 files is between 8 and
320 kbps.
Make sure that the sample rate of the MP3 files is 32kHz,
44.1kHz or 48kHz.
Cannot find a JPEG file.
Cannot find a MP3 file.
Cannot upgrade SW.
Make sure that the selected group (folder) does not contain
more than 9,999 files for DVD and 999 files for CD.
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.
Make sure that the selected folder does not contain more than
9,999 files for DVD and 999 files for CD.
Make sure that the file extension is .mp3 or .MP3.
When you upgrade the system with USB Flash device, you
should make a new folder named UPG_ALL, and copy the
upgrade file into this folder.
The USB Flash Device
cannot be played.
Use USB Flash Device corresponding to the Mass Storage
Class Driver.
Sometimes the options
of setup menu cannot
be selected.
When playing a DVD disc or Blu-ray Disc™, press STOP
button once, the player will go into stop resume mode,
meanwhile you cannot change some settings in setup menu
such as language subitem menu, audio, subtitle etc.
If you want to change that, press STOP button twice, the
player will go into full stop mode, then you can do it.
ꢀꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Glossary
Dolby® TrueHD
Aspect ratio
Aspect ratio refers to the length to height
ratio of TV screens. The ratio of a standard
TV is 4:3, while the ratio of a high
definition or wide TV is 16:9. The letterbox
allows you to enjoy a picture with a wider
perspective on a standard 4:3 screen.
Dolby TrueHD is a lossless coding
technology developed for next generation
optical discs. Blu-ray DiscTM supports 7.1
multi-channel surround sound output.
DTS®
DTS is a multi-channel surround sound
system. By connecting to DTS decoder,
you can enjoy movie dynamic and realistic
sound like movie theater. DTS surround
sound technologies were developed by
DTS, Inc.
Blu-ray DiscTM
Blu-ray DiscTM is a next generation optical
video disc capable of storing five times
more data than a conventional DVD. The
large capacity makes it possible to benefit
from the features such as high-definition
videos, multichannel surround sound,
interactive menus and so on.
DTS-HD®
DTS-HD is a lossless coding technology
developed as an extension of the original
DTS Coherent Acoustics format.
Blu-ray DiscTM supports 7.1 multi-channel
surround sound output.
BONUSVIEWTM
This is a Blu-ray DiscTM-Video (Final Standard
Profile or Profile 1.1) that supports
interactive content encoded on the disc,
such as picture-in-picture. This means you
can play the primary video and secondary
video simultaneously.
DTS-HD Master AudioTM
A disc encoded with DTS-HD Master Audio
delivers ALL of the information from the
original master recording — bit-for-bit, it's
identical to what the sound engineers laid
down. Audio doesn't get any better than
this.
Digital Audio
Digital Audio is a sound signal that has
been converted into numerical values.
Digital sound can be transmitted through
multiple channels. Analog sound can
only be transmitted through two channels.
HDCP
High-bandwidth Digital Content Protection.
This is a specification that provides a
secure transmission of digital contents
between different devices (to prevent
unauthorized copyright.)
Dolby® Digital
The system to compress digital sound
developed by Dolby Laboratories. It offers
you sound of stereo (2ch) or multichannel
audio.
HDMI®
High-DefinitionMultimediaInterface (HDMI)
is a high-speed digital interface that can
transmit uncompressed high definition
video and digital multichannel audio. It
delivers high quality picture and sound
quality. HDMI is fully backward compatible
with DVI. As required by the HDMI standard,
connecting to HDMI or DVI products without
HDCP (High bandwidth Digital Content
Protection) will result in no Video or Audio
output.
Dolby® Digital Plus
Dolby Digital Plus is the next generation
digital audio compression technology
developed as an extension to Dolby Digital.
Blu-ray DiscTM supports 7.1 multi-channel
surround sound output.
ꢀꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
JPEG
A very common digital still picture format.
A still-picture data compression system
proposed by the Joint Photographic Expert
Group, which features small decrease in
image quality in spite of its high compression
ratio. Files are recognized by their file
extension ‘.jpg’ or ‘.jpeg.’
LAN (Local Area Network)
A group of linked devices in a company,
school or home. Indicates the boundaries
of a particular network.
Local storage
This storage area is used as destination for
storing additional contents from BD-Live™
enabled Blu-ray Disc™-Video.
MP3
A file format with a sound data
compression system. MP3 is the
abbreviation of Motion Picture Experts
Group 1 (or MPEG-1) Audio Layer 3. With
the MP3 format, one CD-R or CD-RW can
contain about 10 times more data than a
regular CD.
PBC
Playback Control. A system where you
navigate through a Video CD/Super VCD
with on-screen menus that are recorded
onto the disc. You can enjoy interactive
playback and search.
PCM
Pulse Code Modulation. A digital audio
encoding system.
Region code
A system that allows discs to be played
only in the region designated. This unit
only plays discs that have compatible
region codes. You can find the region code
of your unit on the product label. Some
discs are compatible with more than one
region (or ALL regions).
ꢀꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
License Information on the Software Used in This Product
This document is statement purpose only. Not concerned with operation of this
product.
The software pre-installed in this product consists of multiple, independent software components. Each software
component is copyrighted by a third party. This product uses software components that are distributed as freeware
under a third-party end-user license agreement or copyright notice (hereinafter referred to as a “EULA”).
Some EULAs require that the source code of the applicable component be disclosed as the condition for distribut-
ing the software component in executable format. You can check the software components subject to such EULA
requirements on the following phone number:
Phone number: 1-800-631-3811
TOSHIBA provides a warranty for this product you have purchased under conditions set forth by TOSHIBA. However,
some of the software components distributed under an EULA are made available for use by the user on the assump-
tion that they are not copyrighted or warranted by a third party. These software components are licensed to the user
free of charge and therefore not covered by any warranty within the scope of the applicable laws. These software
components are not subject to any copyrights or other third-party rights and are provided in “as is” condition without
any warranty, whether express or implied. “Warranty” here includes, but not limited to, an implied warranty for mar-
ketability or fitness for specific uses. All risks associated with the quality or performance of these software compo-
nents are assumed by the user. TOSHIBA shall not be liable whatsoever for any cost of repair or correction or other
incidental expense incurred in connection with a defect found in any of these software components. Unless specified
under the applicable laws or in a written agreement, a party who changes or redistributes the software with consent
from the copyright holders or based on the aforementioned licenses shall not be held liable whatsoever for any loss
arising from the use of or inability to use such software components. The same applies even when the copyright
holders or relevant third parties have been informed of the possibility of such loss. “Loss” here includes normal,
special, incidental and indirect loss (including, but not limited to, the loss of data or its accuracy; loss incurred by the
user or any third party; and interface incompatibility with other software). Please read each EULA for details on the
use conditions and items that must be observed regarding these software components.
The table below lists the software components pre-installed in this product, which are subject to EULAs. The user
should read the applicable EULAs carefully before using these software components. The EULAs are exhibited in their
original text (English) as exactly written by the respective parties.
Project name
Linux kernel
SquashFS
Busybox
Project license
GPLv2
GPLv2
GPLv2
U-boot
GPLv2
gcc libgcc
GPLv3.txt and gcc-exception.txt (GPLv3 with GCC Runtime
Library Exception)
gcc libstdc++
GPLv3.txt and gcc-exception.txt (GPLv3 with GCC Runtime
Library Exception)
glibc
LGPLv2.1
LIRC
GPLv2
International Components for Unicode
ICULicense.txt
openssl.txt
zlib.txt
OpenSSL
zlib
FreeType
FreeType.txt
expat.txt
Expat
cURL
libcurl.txt
Independent JPEG group
libjpeg.txt
c-ares
c-arse.txt
mtd-utils
GPLv2
libmtp
LGPLv2.1
libusb
LGPLv2.1
libusb-compat
Unicode Bidirectional Algorithm
HarfBuzz
LGPLv2.1
Unicode_Bidirectional_Algorithm.txt
HarfBuzz.txt
ꢀꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software
Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA
02110-1301 USA
Everyone is permitted to copy and distribute
verbatim copies
Also, for each author's protection and ours,
we want to make certain that everyone under-
stands that there is no warranty for this free
software. If the software is modified by some-
one else and passed on, we want its recipients
to know that what they have is not the original,
so that any problems introduced by others will
not reflect on the original authors' reputations.
of this license document, but changing it is
not allowed.
Finally, any free program is threatened con-
stantly by software patents. We wish to avoid
the danger that redistributors of a free program
will individually obtain patent licenses, in effect
making the program proprietary. To prevent
this, we have made it clear that any patent
must be licensed for everyone's free use or not
licensed at all.
Preamble
The licenses for most software are designed to
take away your freedom to share and change
it. By contrast, the GNU General Public Li-
cense is intended to guarantee your freedom
to share and change free software--to make
sure the software is free for all its users. This
General Public License applies to most of the
Free Software Foundation's software and to any
other program whose authors commit to us-
ing it. (Some other Free Software Foundation
software is covered by the GNU Lesser General
Public License instead.) You can apply it to your
programs, too.
The precise terms and conditions for copying,
distribution and modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING,
DISTRIBUTION AND MODIFICATION
0. This License applies to any program or oth-
er work which contains a notice placed by the
copyright holder saying it may be distributed
under the terms of this General Public License.
The "Program", below, refers to any such pro-
gram or work, and a "work based on the Pro-
gram" means either the Program or any deriva-
tive work under copyright law: that is to say, a
work containing the Program or a portion of it,
either verbatim or with modifications and/or
translated into another language. (Hereinaf-
ter, translation is included without limitation in
the term "modification".) Each licensee is ad-
dressed as "you".
When we speak of free software, we are refer-
ring to freedom, not price. Our General Public
Licenses are designed to make sure that you
have the freedom to distribute copies of free
software (and charge for this service if you
wish), that you receive source code or can get it
if you want it, that you can change the software
or use pieces of it in new free programs; and
that you know you can do these things.
To protect your rights, we need to make re-
strictions that forbid anyone to deny you these
rights or to ask you to surrender the rights.
These restrictions translate to certain respon-
sibilities for you if you distribute copies of the
software, or if you modify it.
Activities other than copying, distribution and
modification are not covered by this License;
they are outside its scope. The act of running
the Program is not restricted, and the output
from the Program is covered only if its con-
tents constitute a work based on the Program
(independent of having been made by running
the Program). Whether that is true depends on
what the Program does.
For example, if you distribute copies of such a
program, whether gratis or for a fee, you must
give the recipients all the rights that you have.
You must make sure that they, too, receive or
can get the source code. And you must show
them these terms so they know their rights.
We protect your rights with two steps: (1)
copyright the software, and (2) offer you this li-
cense which gives you legal permission to copy,
distribute and/or modify the software.
1. You may copy and distribute verbatim cop-
ies of the Program's source code as you receive
it, in any medium, provided that you conspicu-
ously and appropriately publish on each copy
ꢀꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
an appropriate copyright notice and disclaimer
of warranty; keep intact all the notices that re-
fer to this License and to the absence of any
warranty;and give any other recipients of the
Program a copy of this License along with the
Program.
ute the same sections as part of a whole which
is a work based on the Program, the distribu-
tion of the whole must be on the terms of this
License, whose permissions for other licensees
extend to the entire whole, and thus to each
and every part regardless of who wrote it.
You may charge a fee for the physical act of
transferring a copy, and you may at your op-
tion offer warranty protection in exchange for
a fee.
Thus, it is not the intent of this section to claim
rights or contest your rights to work written en-
tirely by you; rather, the intent is to exercise the
right to control the distribution of derivative or
collective works based on the Program.
2. You may modify your copy or copies of
the Program or any portion of it, thus forming
a work based on the Program, and copy and
distribute such modifications or work under the
terms of Section 1 above, provided that you
also meet all of these conditions:
In addition, mere aggregation of another work
not based on the Program with the Program (or
with a work based on the Program) on a volume
of a storage or distribution medium does not
bring the other work under the scope of this
License.
a) You must cause the modified files to carry
prominent notices stating that you changed the
files and the date of any change.
3. You may copy and distribute the Program
(or a work based on it, under Section 2) in ob-
ject code or executable form under the terms of
Sections 1 and 2 above provided that you also
do one of the following:
b) You must cause any work that you dis-
tribute or publish, that in whole or in part con-
tains or is derived from the Program or any
part thereof, to be licensed as a whole at no
charge to all third parties under the terms of
this License.
a) Accompany it with the complete corre-
sponding machine-readable source code, which
must be distributed under the terms of Sections
1 and 2 above on a medium customarily used
for software interchange; or,
c) If the modified program normally reads
commands interactively when run, you must
cause it, when started running for such inter-
active use in the most ordinary way, to print
or display an announcement including an ap-
propriate copyright notice and a notice that
there is no warranty (or else, saying that you
provide
a warranty) and that users may redistribute the
program under these conditions, and telling
the user how to view a copy of this License.
(Exception: if the Program itself is interactive
but does not normally print such an announce-
ment, your work based on the Program is not
required to print an announcement.)
b) Accompany it with a written offer, valid
for at least three years, to give any third party,
for a charge no more than your cost of physi-
cally performing source distribution, a complete
machine-readable copy of the corresponding
source code, to be distributed under the terms
of Sections 1 and 2 above on a medium custom-
arily used for software interchange; or,
c) Accompany it with the information you re-
ceived as to the offer to distribute correspond-
ing source code. (This alternative is allowed
only for non-commercial distribution and only
if you received the program in object code or
executable form with such an offer, in accord
with Subsection b above.)
These requirements apply to the modified work
as a whole.
If identifiable sections of that work are not de-
rived from the Program, and can be reasonably
considered independent and separate works in
themselves, then this License, and its terms, do
not apply to those sections when you distribute
them as separate works. But when you distrib-
The source code for a work means the preferred
form of the work for making modifications to it.
For an executable work, complete source code
means all the source code for all modules it
contains, plus any associated interface defini-
ꢀꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
tion files, plus the scripts used to control compi-
lation and installation of the executable. How-
ever, as a special exception, the source code
distributed need not include anything that is
normally distributed (in either source or binary
form) with the major components (compiler,
kernel, and so on) of the operating system on
which the executable runs, unless that compo-
nent itself accompanies the executable.
conditions are imposed on you (whether by
court order, agreement or otherwise) that con-
tradict the conditions of this License, they do
not excuse you from the conditions of this Li-
cense. If you cannot distribute so as to satisfy
simultaneously your obligations under this
License and any other pertinent obligations,
then as a consequence you may not distribute
the Program at all. For example, if a patent
license would not permit royalty-free redistribu-
tion of the Program by all those who receive
copies directly or indirectly through you, then
the only way you could satisfy both it and this
License would be to refrain entirely from distri-
bution of the Program.
If distribution of executable or object code is
made by offering access to copy from a des-
ignated place, then offering equivalent access
to copy the source code from the same place
counts as distribution of the source code, even
though third parties are not compelled to copy
the source along with the object code.
If any portion of this section is held invalid or
unenforceable under any particular circum-
stance, the balance of the section is intended to
apply and the section as a whole is intended to
apply in other circumstances.
4. You may not copy, modify, sublicense, or
distribute the Program except as expressly pro-
vided under this License. Any attempt other-
wise to copy, modify, sublicense or distribute
the Program is void, and will automatically ter-
minate your rights under this License.
However, parties who have received copies,
or rights, from you under this License will not
have their licenses terminated so long as such
parties remain in full compliance.
It is not the purpose of this section to induce
you to infringe any patents or other property
right claims or to contest validity of any such
claims; this section has the sole purpose of pro-
tecting the integrity of the free software distri-
bution system, which is implemented by public
license practices. Many people have made
generous contributions to the wide range of
software distributed through that system in reli-
ance on consistent application of that system;
it is up to the author/donor to decide if he or
she is willing to distribute software through any
other system and a licensee cannot impose that
choice.
5. You are not required to accept this License,
since you have not signed it. However, nothing
else grants you permission to modify or distrib-
ute the Program or its derivative works. These
actions are prohibited by law if you do not ac-
cept this License. Therefore, by modifying or
distributing the Program (or any work based on
the Program), you indicate your acceptance of
this License to do so, and all its terms and con-
ditions for copying, distributing or modifying
the Program or works based on it.
This section is intended to make thoroughly
clear what is believed to be a consequence of
the rest of this License.
6. Each time you redistribute the Program (or
any work based on the Program), the recipient
automatically receives a license from the origi-
nal licensor to copy, distribute or modify the
Program subject to these terms and conditions.
You may not impose any further restrictions on
the recipients' exercise of the rights granted
herein. You are not responsible for enforcing
compliance by third parties to this License.
8. If the distribution and/or use of the Program
is restricted in certain countries either by pat-
ents or by copyrighted interfaces, the original
copyright holder who places the Program under
this License may add an explicit geographical
distribution limitation excluding those coun-
tries, so that distribution is permitted only in
or among countries not thus excluded. In such
case, this License incorporates the limitation as
if written in the body of this License.
7. If, as a consequence of a court judgment
or allegation of patent infringement or for any
other reason (not limited to patent issues),
9. The Free Software Foundation may publish
revised and/or new versions
ꢀꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
of the General Public License from time to time.
Such new versions will be similar in spirit to the
present version, but may differ in detail to ad-
dress new problems or concerns.
INCLUDING ANY GENERAL, SPECIAL, INCIDEN-
TAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE
PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED
INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE
PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTH-
ER PARTY HAS BEEN ADVISED OF THE
Each version is given a distinguishing version
number. If the Program specifies a version
number of this License which applies to it and
"any later version", you have the option of fol-
lowing the terms and conditions either of that
version or of any later version published by the
Free Software Foundation. If the Program does
not specify a version number of this License,
you may choose any version ever published by
the Free Software Foundation.
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Pro-
grams
10. If you wish to incorporate parts of the
Program into other free programs whose distri-
bution conditions are different, write to the au-
thor to ask for permission. For software which
is copyrighted by the Free Software Founda-
tion, write to the Free Software Foundation;
we sometimes make exceptions for this. Our
decision will be guided by the two goals of pre-
serving the free status of all derivatives of our
free software and of promoting the sharing and
reuse of software generally.
If you develop a new program, and you want
it to be of the greatest possible use to the pub-
lic, the best way to achieve this is to make it
free software which everyone can redistribute
and change under these terms.
To do so, attach the following notices to the
program. It is safest to attach them to the start
of each source file to most effectively convey
the exclusion of warranty; and each file should
have at least the "copyright" line and a pointer
to where the full notice is found.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED
FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMIT-
TED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPY-
RIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITH-
OUT WARRANTY OF ANY KIND, EITHER EX-
PRESSED OR IMPLIED, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PAR-
TICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE
PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME
THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
<one line to give the program's name and a
brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can re-
distribute it and/or modify it under the terms
of the GNU General Public License as published
by the Free Software Foundation; either ver-
sion 2 of the License, or (at your option) any
later version.
This program is distributed in the hope that it
will be useful, but WITHOUT ANY WARRANTY;
without even the implied warranty of MER-
CHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU General Public License
for more details.
12. IN NO EVENT UNLESS REQUIRED BY AP-
PLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTH-
ER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED
ABOVE, BE LIABLE TO YOU FOR DAMAGES,
You should have received a copy of the GNU
General Public License along with this program;
if not, write to the Free Software Foundation,
Inc.,51 Franklin Street, Fifth Floor, Boston, MA
02110-1301 USA.
ꢁ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Also add information on how to contact you by
electronic and paper mail.
verbatim copies of this license document, but
changing it is not allowed.
[This is the first released version of the Lesser
GPL. It also counts as the successor of the GNU
Library Public License, version 2, hence the ver-
sion number 2.1.]
If the program is interactive, make it output a
short notice like this when it starts in an inter-
active mode:
Gnomovision version 69, Copyright (C) year
name of author
Gnomovision comes with ABSOLUTELY NO
WARRANTY; for details type `show w'.
This is free software, and you are welcome
to redistribute it under certain conditions; type
`show c' for details.
Preamble
The licenses for most software are designed to
take away your freedom to share and change it.
By contrast, the GNU General Public
Licenses are intended to guarantee your free-
dom to share and change
free software--to make sure the software is free
for all its users.
The hypothetical commands `show w' and
`show c' should show the appropriate
parts of the General Public License. Of course,
the commands you use may
be called something other than `show w' and
`show c'; they could even be
This license, the Lesser General Public License,
applies to some specially designated software
packages--typically libraries--of the Free Soft-
ware Foundation and other authors who decide
to use it. You can use it too, but we suggest
you first think carefully about whether this li-
cense or the ordinary General Public License is
the better strategy to use in any particular case,
based on the explanations below.
mouse-clicks or menu items--whatever suits
your program.
You should also get your employer (if you work
as a programmer) or your school, if any, to sign
a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
When we speak of free software, we are refer-
ring to freedom of use, not price. Our General
Public Licenses are designed to make sure that
you have the freedom to distribute copies of
free software (and charge for this service if you
wish); that you receive source code or can get
it if you want it; that you can change the soft-
ware and use pieces of it in new free programs;
and that you are informed that you can do
these things.
Yoyodyne, Inc., hereby disclaims all copyright
interest in the program ‘Gnomovision’ (which
makes passes at compilers) written by James
Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit in-
corporating your program into proprietary pro-
grams. If your program is a subroutine library,
you may consider it more useful to permit link-
ing proprietary applications with the library. If
this is what you want to do, use the GNU Lesser
General Public License instead of this License.
To protect your rights, we need to make re-
strictions that forbid distributors to deny you
these rights or to ask you to surrender these
rights. These restrictions translate to
certain responsibilities for you if you
distribute copies of the library or if
you modify it.
LGPLv2.1
For example, if you distribute cop-
ies of the library, whether gratis or for
a fee, you must give the recipients all
the rights that we gave
GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foun-
dation, Inc. 51 Franklin Street, Fifth Floor, Bos-
ton, MA 02110-1301 USA
you. You must make sure that they, too, re-
ceive or can get the source
code. If you link
other code with the library, you must provide
complete object files to the recipients, so that
Everyone is permitted to copy and distribute
ꢁ1
Download from Www.Somanuals.com. All Manuals Search And Download.
they can relink them with the library after mak-
ing changes to the library and recompiling it.
And you must show them these terms so they
know their rights.
are the reason we use the ordinary General
Public License for many libraries. However, the
Lesser license provides advantages in certain
special circumstances. For example, on rare
occasions, there may be a special need to
encourage the widest possible use of a certain
library, so that it becomes a de-facto standard.
To achieve this, non-free programs must be
allowed to use the library. A more frequent
case is that a free library does the same job
as widely used non-free libraries. In this case,
there is little to gain by limiting the free library
to free software only, so we use the Lesser
We protect your rights with a two-step meth-
od: (1) we copyright the library, and (2) we of-
fer you this license, which gives you legal
permission to copy, distribute and/or modify the
library.
To protect each distributor, we want to make
it very clear that there is no warranty for the
free library. Also, if the library is modified
by someone else and passed on, the re-
cipients should know that what they have is
not the original version, so that the original
author's reputation will not be affected by
problems that might be introduced by oth-
General Public License.
In other cases,
permission to use a particular library in non-
free programs enables a greater number of
people to use a large body of free software.
For example, permission to use the GNU C
Library in non-free programs enables many
more people to use the whole GNU operating
system, as well as its variant, the GNU/Linux
ers.
Finally, software patents pose a
constant threat to the existence of
any free program. We wish to make sure
that a company cannot effectively restrict
the users of a free program by obtaining
a restrictive license from a patent holder.
Therefore, we insist that any patent license
obtained for a version of the library must be
consistent with the full freedom of use
specified in this license.
Most GNU software, including some li-
braries, is covered by the ordinary GNU
General Public License. This license, the
GNU Lesser General Public License, ap-
plies to certain designated libraries, and
is quite different from the ordinary General
Public License. We use this license for certain
libraries in order to permit linking those librar-
ies into non-free programs.
operating system.
Although the Lesser
General Public License is Less protective of the
users' freedom, it does ensure that the user
of a program that is linked with the Library
has the freedom and the wherewithal to run
that program using a modified version of the
Library.
The precise
terms and conditions for copying, distribution
and modification follow. Pay close attention
to the difference between a "work based on
the library" and a "work that uses the library".
The former contains code derived from the
library, whereas the latter must be combined
with the library in order to run.
GNU LESSER GENERAL PULIC LICENSE
When a program is linked with a library,
whether statically or using a shared library, the
combination of the two is legally speaking a
combined work, a derivative of the original li-
brary. The ordinary General Public License
therefore permits such linking only if the
entire combination fits its criteria of freedom.
The Lesser General Public License permits
more lax criteria for linking other code with
TERMS AND CONDITIONS FOR COPYING,
DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any
software library or other program which con-
tains a notice placed by the copyright holder or
other authorized party saying it may be
distributed under the terms of this Lesser
General Public License (also called "this
License").Each licensee is addressed as "you".
A "library" means a collection of software
functions and/or data prepared so as to be
conveniently linked with application programs
(which use some of those functions and data)
to form executables.
the library.
We
call this license the "Lesser" General Public
License because it does Less to protect the us-
er's freedom than the ordinary General Public
License. It also provides other free software
developers Less of an advantage over compet-
ing non-free programs. These disadvantages
The "Library", below, refers to any such
ꢁꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
software library or work which has been
distributed under these terms. A "work based
on the Library" means either the Library or any
derivative work under copyright law: that is to
say, a work containing the Library or a portion
of it, either verbatim or with modifications and/
or translated straightforwardly into another
language. (Hereinafter, translation is included
without limitation in the term "modification".)
"Source code" for a work means the preferred
form of the work for making modifications to
it. For a library, complete source code means
all the source code for all modules it contains,
plus any associated interface definition files,
plus the scripts used to control compilation and
installation of the library.
Activities other than copying, distribution and
modification are not covered by this License;
they are outside its scope. The act of running
a program using the Library is not restricted,
and output from such a program is covered
only if its contents constitute a work based
on the Library (independent of the use of the
Library in a tool for writing it). Whether that
is true depends on what the Library does and
what the program that uses the Library does.
1. You may copy and distribute verbatim
copies of the Library's complete source code
as you receive it, in any medium, provided
that you conspicuously and appropriately
publish on each copy an appropriate copy-
right notice and disclaimer of warranty; keep
intact all the notices that refer to this License
and to the absence of any warranty; and
distribute a copy of this License along with
the Library.
parties under the terms of this License.
d) If a facility in the modified Library
refers to a function or a table of data to
be supplied by an application program that
uses the facility, other than as an argu-
ment passed when the facility is invoked,
then you must make a good faith effort
to ensure that, in the event an application
does not supply such function or table, the
facility still operates, and performs whatever
part of its purpose remains meaningful.
(For example, a function in a library to
compute square roots has a purpose that is
entirely well-defined independent of the ap-
plication. Therefore, Subsection 2d requires
that any application-supplied function or table
used by this function must be optional: if the
application does not supply it, the square root
function must still compute square roots.)
These requirements apply to the modified
work as a whole. If identifiable sections of
that work are not derived from the Library, and
can be reasonably considered independent
and separate works in themselves, then this
License, and its terms, do not apply to those
sections when you distribute them as separate
works. But when you distribute the same
sections as part of a whole which is a work
based on the Library, the distribution of the
whole must be on the terms of this License,
whose permissions for other licensees extend
to the entire whole, and thus to each and
every part regardless of who wrote it. Thus, it
is not the intent of this section to claim rights
or contest your rights to work written entirely
by you; rather, the intent is to exercise the
right to control the distribution of derivative or
collective works based on the Library. In ad-
dition, mere aggregation of another work not
based on the Library with the Library (or with
a work based on the Library) on a volume of a
storage or distribution medium does not bring
the other work under the scope of this License.
3. You may opt to apply the terms of the
ordinary GNU General Public License instead
of this License to a given copy of the Library.
To do this, you must alter all the notices that
refer to this License, so that they refer to the
ordinary GNU General Public License, ver-
sion 2, instead of to this License. (If a newer
version than version 2 of the ordinary GNU
General Public License has appeared, then
you can specify that version instead if you
wish.) Do not make any other change in these
You may charge a fee for the physi-
cal act of transferring a copy, and you
may at your option offer warranty pro-
tection in exchange for a fee.
2. You may modify your copy or cop-
ies of the Library or any portion of it, thus
forming a work based on the Library, and
copy and distribute such modifications or
work under the terms of Section 1 above,
provided that you also meet all of these
conditions:
a) The modified work must itself be a soft-
ware library.
b) You must cause the files modified to
carry prominent notices stating that you
changed the files and the date of any change.
c) You must cause the whole of the
work to be licensed at no charge to all third
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
notices. Once this change is made in a given
copy, it is irreversible for that copy, so the
ordinary GNU General Public License applies
to all subsequent copies and derivative works
made from that copy. This option is useful
when you wish to copy part of the code of the
Library into a program that is not a library.
4. You may copy and distribute the Library
(or a portion or derivative of it, under Section
2) in object code or executable form under
the terms of Sections 1 and 2 above provided
that you accompany it with the complete
corresponding machine-readable source code,
which must be distributed under the terms
of Sections 1 and 2 above on a medium
customarily used for software interchange.
If distribution of object code is made by
offering access to copy from a designated
place, then offering equivalent access to copy
the source code from the same place satisfies
the requirement to distribute the source code,
even though third parties are not compelled to
copy the source along with the object code.
5. A program that contains no derivative of
any portion of the Library, but is designed to
work with the Library by being compiled or
linked with it, is called a "work that uses the
Library". Such a work, in isolation, is not a
derivative work of the Library, and therefore
falls outside the scope of this License. How-
ever, linking a "work that uses the Library"
with the Library creates an executable that
is a derivative of the Library (because it
contains portions of the Library), rather than
a "work that uses the library". The execut-
able is therefore covered by this License.
Section 6 states terms for distribution of
such executables. When a "work that uses
the Library" uses material from a header file
that is part of the Library, the object code
for the work may be a derivative work of the
Library even though the source code is not.
Whether this is true is especially significant
if the work can be linked without the Library,
or if the work is itself a library. The threshold
for this to be true is not precisely defined by
law. If such an object file uses only numeri-
cal parameters, data structure layouts and
accessors, and small macros and small inline
functions (ten lines or less in length), then
the use of the object file is unrestricted,
regardless of whether it is legally a deriva-
tive work. (Executables containing this object
code plus portions of the Library will still fall
under Section 6.) Otherwise, if the work is
a derivative of the Library, you may distribute
the object code for the work under the terms
of Section 6.Any executables containing that
work also fall under Section 6, whether or not
they are linked directly with the Library itself.
6. As an exception to the Sections above, you
may also combine or link a "work that uses
the Library" with the Library to produce a work
containing portions of the Library, and distrib-
ute that work under terms of your choice, pro-
vided that the terms permit modification of the
work for the customer's own use and reverse
engineering for debugging such modifications.
You must give prominent notice with each
copy of the work that the Library is used in it
and that the Library and its use are covered
by this License. You must supply a copy of
this License. If the work during execution
displays copyright notices, you must include
the copyright notice for the Library among
them, as well as a reference directing the user
to the copy of this License. Also, you must do
one of these things:
a) Accompany the work
with the complete corresponding machine-
readable source code for the Library including
whatever
changes were used in the work
(which must be distributed under Sections 1
and 2 above); and, if the work is an execut-
able linked with the Library, with the complete
machine-readable "work that uses the Library",
as object code and/or source code, so that the
user can modify the Library and then relink to
produce a modified executable containing the
modified Library. (It is understood that the
user who changes the contents of definitions
files in the Library will not necessarily be able
to recompile the application
to use the mod-
ified definitions.) b) Use a suitable shared
library mechanism for linking with the Library.
A suitable mechanism is one that (1) uses at
run time a copy of the library already present
on the user's computer system, rather than
copying library functions into the executable,
and (2) will operate properly with a modified
version of the library, if the user installs one,
as long as the modified version is interface-
compatible with the version that the work was
made with. c) Accompany the work with a
written offer, valid for at least three years, to
give the same user the materials specified in
Subsection 6a, above, for a charge no more
than the cost of performing this distribution.
d) If distribution of the work is made by offer-
ꢁꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
ing access to copy from a designated place,
offer equivalent access to copy the above
specified materials from the same place.
e) Verify that the user has already received
a copy of these materials or that you have
already sent this user a copy. For an execut-
able, the required form of the "work that
uses the Library" must include any data and
utility programs needed for reproducing the
executable from it. However, as a special
exception, the materials to be distributed
need not include anything that is normally
distributed (in either source or binary form)
with the major components (compiler, kernel,
and so on) of the operating system on which
the executable runs, unless that compo-
nent itself accompanies the executable.
It may happen that this requirement contra-
dicts the license restrictions of other propri-
etary libraries that do not normally accompany
the operating system. Such a contradiction
means you cannot use both them and the
Library together in an executable that you
distribute.
7. You may place library facilities that are a
work based on the Library side-by-side in a
single library together with other library facili-
ties not covered by this License, and distribute
such a combined library, provided that the
separate distribution of the work based on
the Library and of the other library facilities is
otherwise permitted, and provided that you do
these two things:
a) Accompany the combined library with a
copy of the same work based on the Library,
uncombined with any other library facilities.
This must be distributed under the terms
of the Sections above.
License, since you have not signed it.
However, nothing else grants you permis-
sion to modify or distribute the Library or
its derivative works. These actions are
prohibited by law if you do not accept this
License. Therefore, by modifying or distrib-
uting the Library (or any work based on the
Library), you indicate your acceptance of this
License to do so, and all its terms and condi-
tions for copying, distributing or modifying
the Library or works based on it.
10. Each time you redistribute the Library
(or any work based on the Library), the
recipient automatically receives a license from
the original licensor to copy, distribute, link
with or modify the Library subject to these
terms and conditions. You may not impose
any further restrictions on the recipients'
exercise of the rights granted herein. You
are not responsible for enforcing compli-
ance by third parties with this License.
11. If, as a consequence of a court judgment
or allegation of patent infringement or for any
other reason (not limited to patent issues),
conditions are imposed on you (whether by
court order, agreement or otherwise) that con-
tradict the conditions of this License, they do
not excuse you from the conditions of this Li-
cense. If you cannot distribute so as to satisfy
simultaneously your obligations under this Li-
cense and any other pertinent obligations, then
as a consequence you may not distribute the
Library at all. For example, if a patent license
would not permit royalty-free redistribution
of the Library by all those who receive copies
directly or indirectly through you, then the only
way you could satisfy both it and this License
would be to refrain entirely from distribution of
the Library.
b) Give prominent notice with the com-
bined library of the fact that part of it is
a work based on the Library, and explain-
ing where to find the accompanying
If any portion of this section is held in-
valid or unenforceable under any particular
circumstance, the balance of the section is
intended to apply, and the section as a whole
is intended to apply in other circumstances. It
is not the purpose of this section to induce you
to infringe any patents or other property right
claims or to contest validity of any such claims;
this section has the sole purpose of protecting
the integrity of the free software distribution
system which is implemented by public license
practices. Many people have made generous
contributions to the wide range of software
distributed through that system in reliance
on consistent application of that system; it is
uncombined form of the same work.
8. You may not copy, modify, sublicense,
link with, or distribute the Library except as
expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense,
link with, or distribute the Library is void, and
will automatically terminate your rights under
this License. However, parties who have re-
ceived copies, or rights, from you under this Li-
cense will not have their licenses terminated so
long as such parties remain in full compliance.
9. You are not required to accept this
ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
up to the author/donor to decide if he or she
is willing to distribute software through any
other system and a licensee cannot impose
that choice. This section is intended to make
thoroughly clear what is believed to be a
consequence of the rest of this License.
12. If the distribution and/or use of the Li-
brary is restricted in certain countries either by
patents or by copyrighted interfaces, the origi-
nal copyright holder who places the Library
under this License may add an explicit geo-
graphical distribution limitation excluding those
countries, so that distribution is permitted only
in or among countries not thus excluded. In
such case, this License incorporates the limita-
tion as if written in the body of this License.
13. The Free Software Foundation may
publish revised and/or new versions of the
Lesser General Public License from time to
time. Such new versions will be similar in
spirit to the present version, but may differ in
detail to address new problems or concerns.
Each version is given a distinguishing version
number. If the Library specifies a version
number of this License which applies to it and
"any later version", you have the option of
following the terms and conditions either of
that version or of any later version published
by the Free Software Foundation. If the
Library does not specify a license version
number, you may choose any version ever
published by the Free Software Foundation.
14. If you wish to incorporate parts of the
Library into other free programs whose distri-
bution conditions are incompatible with these,
write to the author to ask for permission. For
software which is copyrighted by the Free Soft-
ware Foundation, write to the Free Software
Foundation; we sometimes make exceptions
for this. Our decision will be guided by the two
goals of preserving the free status of all de-
rivatives of our free software and of promoting
the sharing and reuse of software generally.
INCLUDING, BUT NOT LIMITED TO, THE IM-
PLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE LIBRARY IS WITH
YOU. SHOULD THE LIBRARY PROVE DEFEC-
TIVE, YOU ASSUME THE COST OF ALL NECES-
SARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY AP-
PLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTH-
ER PARTY WHO MAY MODIFY AND/OR REDIS-
TRIBUTE THE LIBRARY AS PERMITTED ABOVE,
BE LIABLE TO YOU FOR DAMAGES, INCLUDING
ANY GENERAL, SPECIAL, INCIDENTAL OR CON-
SEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE LIBRARY (IN-
CLUDING BUT NOT LIMITED TO LOSS OF DATA
OR DATA BEING RENDERED INACCURATE OR
LOSSES SUSTAINED BY YOU OR THIRD PAR-
TIES OR A FAILURE OF THE LIBRARY TO OPER-
ATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN
ADVISED OF THE POSSIBILITY OF SUCH DAM-
AGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Librar-
ies
If you develop a new library, and you want it
to be of the greatest possible use to the pub-
lic, we recommend making it free software that
everyone can redistribute and change. You can
do so by permitting redistribution under these
terms (or, alternatively, under the terms of the
ordinary General Public License). To apply
these terms, attach the following notices to the
library. It is safest to attach them to the start
of each source file to most effectively convey
the exclusion of warranty; and each file should
have at least the "copyright" line and a pointer
to where the full notice is found.
<one line to give the library's name and a
brief idea of what it does.>
NO WARRANTY
Copyright (C) <year> <name of author>
15. BECAUSE THE LIBRARY IS LICENSED FREE
OF CHARGE, THERE IS NO WARRANTY FOR
THE LIBRARY, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE
STATED IN WRITING THE COPYRIGHT HOLD-
ERS AND/OR OTHER PARTIES PROVIDE THE
LIBRARY "AS IS" WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESSED OR IMPLIED,
This library is free software; you can redis-
tribute it and/or modify it under the terms of
the GNU Lesser General Public License as pub-
lished by the Free Software Foundation; either
version 2.1 of the License, or (at your option)
any later version.
This library is distributed in the hope that it
will be useful, but WITHOUT ANY WARRANTY;
ꢁꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
without even the implied warranty of MER-
CHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE. See the GNU Lesser General Public
License for more details. You should have re-
ceived a copy of the GNU Lesser General Public
License along with this library; if not, write to
the Free Software Foundation, Inc., 51 Frank-
lin Street, Fifth Floor, Boston, MA 02110-1301
USA Also add information on how to contact you
by electronic and paper mail. You should also
get your employer (if you work as a program-
mer) or your school, if any, to sign a "copyright
disclaimer" for the library, if necessary. Here
is a sample; alter the names: Yoyodyne, Inc.,
hereby disclaims all copyright interest in the li-
brary `Frob' (a library for tweaking knobs) writ-
ten by James Random Hacker.
DAMAGES WHATSOEVER RESULTING FROM
LOSS OF USE, DATA OR PROFITS, WHETHER
IN AN ACTION OF CONTRACT, NEGLIGENCE OR
OTHER TORTIOUS ACTION, ARISING OUT OF
OR IN CONNECTION WITH THE USE OR PER-
FORMANCE OF THIS SOFTWARE.
Except as contained in this notice, the name
of a copyright holder shall not be used in ad-
vertising or otherwise to promote the sale, use
or other dealings in this Software without prior
written authorization of the copyright holder.
All trademarks and registered trademarks men-
tioned herein are the property of their respec-
tive owners.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That's all there is to it!
LICENSE ISSUES
LICENSE ISSUES
==============
ICU License - ICU 1.8.1 and later
The OpenSSL toolkit stays under a dual li-
cense, i.e. both the conditions of
COPYRIGHT AND PERMISSION NOTICE
the OpenSSL License and the original SSLeay
license apply to the toolkit.
See below for the actual license texts. Actually
both licenses are BSD-style
Copyright (c) 1995-2009 International Business
Machines Corporation and others
All rights reserved.
Open Source licenses. In case of any license
issues related to OpenSSL
Permission is hereby granted, free of charge,
to any person obtaining a copy of this software
and associated documentation files (the "Soft-
ware"), to deal in the Software without restric-
tion, including without limitation the rights to
use, copy, modify, merge, publish, distribute,
and/or sell copies of the Software, and to per-
mit persons to whom the Software is furnished
to do so, provided that the above copyright
notice(s) and this permission notice appear in
all copies of the Software and that both the
above copyright notice(s) and this permission
notice appear in supporting documentation.
please contact [email protected].
OpenSSL License
---------------
/* ===========================
============================
=============
* Copyright (c) 1998-2008 The OpenSSL Proj-
ect. All rights reserved.
*
* Redistribution and use in source and binary
forms, with or without
* modification, are permitted provided that the
following conditions
* are met:
*
THE SOFTWARE IS PROVIDED "AS IS", WITH-
OUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO
THE WARRANTIES OF MERCHANTABILITY, FIT-
NESS FOR A PARTICULAR PURPOSE AND NON-
INFRINGEMENT OF THIRD PARTY RIGHTS. IN
NO EVENT SHALL THE COPYRIGHT HOLDER OR
HOLDERS INCLUDED IN THIS NOTICE BE LI-
ABLE FOR ANY CLAIM, OR ANY SPECIAL INDI-
RECT OR CONSEQUENTIAL DAMAGES, OR ANY
* 1. Redistributions of source code must retain
the above copyright
*
notice, this list of conditions and the follow-
ing disclaimer.
*
* 2. Redistributions in binary form must repro-
duce the above copyright
ꢁꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.
*
notice, this list of conditions and the follow-
OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF
THIS SOFTWARE, EVEN IF ADVISED
* OF THE POSSIBILITY OF SUCH DAMAGE.
* ===========================
============================
=============
ing disclaimer in
*
provided with the
*
*
* 3. All advertising materials mentioning fea-
tures or use of this
*
the documentation and/or other materials
distribution.
software must display the following ac-
*
* This product includes cryptographic software
written by Eric Young
*
for use in the OpenSSL Toolkit. (http://
software written by Tim
www.openssl.org/)"
*
* Hudson ([email protected]).
*
* 4. The names "OpenSSL Toolkit" and "OpenS-
SL Project" must not be used to
*/
*
endorse or promote products derived from
this software without
*
Original SSLeay License
-----------------------
prior written permission. For written per-
mission, please contact
*
*
/* Copyright (C) 1995-1998 Eric Young (eay@
cryptsoft.com)
* 5. Products derived from this software may
not be called "OpenSSL"
* All rights reserved.
*
*
nor may "OpenSSL" appear in their names
* This package is an SSL implementation writ-
ten
without prior written
*
*
permission of the OpenSSL Project.
* by Eric Young ([email protected]).
* The implementation was written so as to con-
form with Netscapes SSL.
* 6. Redistributions of any form whatsoever
must retain the following
*
*
*
acknowledgment:
"This product includes software developed
* This library is free for commercial and non-
commercial use as long as
by the OpenSSL Project
openssl.org/)"
* the following conditions are adhered to. The
following conditions
* apply to all code found in this distribution, be
it the RC4, RSA,
*
*
* THIS SOFTWARE IS PROVIDED BY THE
OpenSSL PROJECT ``AS IS'' AND ANY
* EXPRESSED OR IMPLIED WARRANTIES, IN-
CLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABIL-
ITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT
SHALL THE OpenSSL PROJECT OR
* ITS CONTRIBUTORS BE LIABLE FOR ANY DI-
RECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUB-
STITUTE GOODS OR SERVICES;
* lhash, DES, etc., code; not just the SSL code.
The SSL documentation
* included with this distribution is covered by
the same copyright terms
* except that the holder is Tim Hudson (tjh@
cryptsoft.com).
*
* Copyright remains Eric Young's, and as such
any Copyright notices in
* the code are not to be removed.
* If this package is used in a product, Eric
Young should be given attribution
* as the author of the parts of the library
used.
* LOSS OF USE, DATA, OR PROFITS; OR BUSI-
NESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY
* This can be in the form of a textual message
at program startup or
* in documentation (online or textual) provided
ꢁꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
with the package.
*
LIGENCE OR OTHERWISE) ARISING IN ANY
WAY
* Redistribution and use in source and binary
forms, with or without
* modification, are permitted provided that the
following conditions
* OUT OF THE USE OF THIS SOFTWARE, EVEN
IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* are met:
* The licence and distribution terms for any
publically available version or
* derivative of this code cannot be changed.
i.e. this code cannot simply be
* copied and put under another distribution
licence
* 1. Redistributions of source code must retain
the copyright
*
notice, this list of conditions and the follow-
ing disclaimer.
* 2. Redistributions in binary form must repro-
duce the above copyright
* [including the GNU Public Licence.]
*/
*
notice, this list of conditions and the follow-
ing disclaimer in the
documentation and/or other materials pro-
*
vided with the distribution.
zlib
* 3. All advertising materials mentioning fea-
tures or use of this software
/* zlib.h -- interface of the 'zlib' general purpose
compression library
*
must display the following acknowledge-
version 1.2.3, July 18th, 2005
ware written by
Copyright (C) 1995-2005 Jean-loup Gailly and
Mark Adler
*
Eric Young ([email protected])"
The word 'cryptographic' can be left out if
*
This software is provided 'as-is', without any
express or implied
:-).
warranty. In no event will the authors be held
liable for any damages
* 4. If you include any Windows specific code
(or a derivative thereof) from
arising from the use of this software.
*
the apps directory (application code) you
must include an acknowledgement:
"This product includes software written by
Permission is granted to anyone to use this
software for any purpose,
*
Tim Hudson ([email protected])"
*
including commercial applications, and to alter
it and redistribute it
* THIS SOFTWARE IS PROVIDED BY ERIC
YOUNG ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABIL-
ITY AND FITNESS FOR A PARTICULAR PUR-
POSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE
AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF
LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEG-
freely, subject to the following restrictions:
1. The origin of this software must not be
misrepresented; you must not
claim that you wrote the original software. If
you use this software
in a product, an acknowledgment in the
product documentation would be
appreciated but is not required.
2. Altered source versions must be plainly
marked as such, and must not be
misrepresented as being the original soft-
ware.
3. This notice may not be removed or altered
from any source distribution.
Jean-loup Gailly [email protected]
Mark Adler [email protected]
*/
ꢁꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
The FreeType Project LICENSE
compliance with this license. We thus
encourage you to use the following text:
2006-Jan-27
Copyright 1996-2002, 2006 by David Turner,
Robert Wilhelm, and Werner Lemberg
"""
Portions of this software are copyright ©
org). All rights reserved.
Introduction
============
"""
The FreeType Project is distributed in several
archive packages;
some of them may contain, in addition to the
FreeType font engine,various tools and contri-
butions which rely on, or relate to, the FreeType
Project.
Please replace <year> with the value from the
FreeType version you actually use.
Legal Terms
===========
This license applies to all files found in
such packages, and which do not fall under
their own explicit license. The license affects
thus the FreeType font engine, the test
programs,documentation and makefiles, at the
very least.
0. Definitions
Throughout this license, the terms `package',
`FreeType Project', and `FreeType archive' re-
fer to the set of files originally distributed
by the authors (David Turner, Robert Wilhelm,
and Werner Lemberg) as the `FreeType Project',
be they named as alpha, beta or final release.
This license was inspired by the BSD,
Artistic, and IJG (Independent JPEG Group)
licenses, which all encourage inclusion and use
of free software in commercial and freeware
products alike. As a consequence, its main
points are that:
`You' refers to the licensee, or person us-
ing the project, where`using' is a generic term
including compiling the project's source code
as well as linking it to form a `program' or
`executable'.
This program is referred to as `a program
using the FreeType engine'.
We don't promise that this software works.
However, we will be interested in any kind of
bug reports. (`as is' distribution)
You can use this software for whatever you
want, in parts or full form, without having to
pay us. (`royalty-free' usage)
This license applies to all files distributed in
the original FreeType Project, including all
source code, binaries and documentation,
unless otherwise stated in the file in its
original, unmodified form as distributed in the
original archive.
If you are unsure whether or not a particular
file is covered by this license, you must contact
us to verify this.
You may not pretend that you wrote this
software. If you use it, or only parts of it, in
a program, you must acknowledge somewhere
in your documentation that you have used
the FreeType code. (`credits')
We specifically permit and encourage the
inclusion of this software, with or without
modifications, in commercial products. We dis-
claim all warranties covering The FreeType
Project and assume no liability related to The
FreeType Project.
The FreeType Project is copyright (C) 1996-
2000 by David Turner,
Robert Wilhelm, and Werner Lemberg. All
rights reserved except as
specified below.
1. No Warranty
Finally, many people asked us for a pre-
ferred form for a credit/disclaimer to use in
THE FREETYPE PROJECT IS PROVIDED `AS
ꢂ0
Download from Www.Somanuals.com. All Manuals Search And Download.
IS' WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED, IN-
CLUDING, BUT NOT LIMITED TO,
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
one or more of the following phrases to refer
to this software in your documentation or adver-
tising materials: `FreeType Project', `FreeType
Engine', `FreeType library', or `FreeType Distri-
bution'.
PURPOSE. IN NO EVENT WILL ANY OF THE
AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY DAMAGES CAUSED BY
THE USE OR THE INABILITY TO
As you have not signed this license, you
are not required to accept it. However, as
the FreeType Project is copyrighted material,
only this license, or another one contracted
with the authors, grants you the right to use,
distribute, and modify it.
USE, OF THE FREETYPE PROJECT.
2. Redistribution
Therefore, by using, distributing, or modi-
fying the FreeType Project, you indicate that
you understand and accept all the terms of this
license.
This license grants a worldwide, royalty-free,
perpetual and irrevocable right and license to
use, execute, perform, compile,display, copy,
create derivative works of, distribute and
sublicense the FreeType Project (in both
source and object code forms) and deriva-
tive works thereof for any purpose; and to
authorize others to exercise some or all of the
rights granted herein, subject to the following
conditions:
4. Contacts
There are two mailing lists related to
FreeType:
Redistribution of source code must re-
tain this license file (`FTL.TXT') unaltered; any
additions, deletions or changes to the original
files must be clearly indicated in accompanying
documentation. The copyright notices of the
unaltered,original files must be preserved in
all copies of source files.
Discusses general use and applications of
FreeType, as well as future and wanted addi-
tions to the library and distribution.
If you are looking for support, start in
this list if you
haven't found anything to help you in the
documentation.
Redistribution in binary form must provide
a disclaimer that states that the software is
based in part of the work of the FreeType Team,
in the distribution documentation. We also
encourage you to put an URL to the FreeType
web page in your documentation, though this
isn't mandatory.
Discusses bugs, as well as engine internals,
design issues,specific licenses, porting, etc.
Our home page can be found at
These conditions apply to any software de-
rived from or based on the FreeType Project,
not just the unmodified files. If you use our
work, you must acknowledge us. However, no
fee need be paid to us.
Expat
Copyright (c) 1998, 1999, 2000 Thai Open
Source Software Center Ltd and Clark Cooper
Copyright (c) 2001, 2002, 2003, 2004, 2005,
2006 Expat maintainers.
3. Advertising
Neither the FreeType authors and contribu-
tors nor you shall use the name of the other
for commercial, advertising, or promotional pur-
poses without specific prior written permission.
Permission is hereby granted, free of charge,
to any person obtaining a copy of this software
and associated documentation files (the Soft-
ware), to deal in the Software without restric-
tion, including without limitation the rights to
We suggest, but do not require, that you use
ꢂ1
Download from Www.Somanuals.com. All Manuals Search And Download.
use, copy, modify, merge, publish, distribute,
sublicense, and/or sell copies of the Software,
and to permit persons to whom the Software
is furnished to do so, subject to the following
conditions:
Except as contained in this notice, the name of
a copyright holder shall not
be used in advertising or otherwise to promote
the sale, use or other dealings
in this Software without prior written authoriza-
tion of the copyright holder.
The above copyright notice and this permission
notice shall be included in all copies or substan-
tial portions of the Software.
IJG
THE SOFTWARE IS PROVIDED "AS IS", WITH-
OUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO THE WARRANTIES OF
1. We don't promise that this software works.
(But if you find any bugs,please let us know!)
2. You can use this software for whatever you
want. You don't have to pay us.
MERCHANTABILITY, FITNESS FOR A PARTICU-
LAR PURPOSE AND NONINFRINGEMENT.
IN NO EVENT SHALL THE AUTHORS OR COPY-
RIGHT HOLDERS BE LIABLE FOR ANY
CLAIM, DAMAGES OR OTHER LIABILITY,
WHETHER IN AN ACTION OF CONTRACT,
TORT OR OTHERWISE, ARISING FROM, OUT
OF OR IN CONNECTION WITH THE
3. You may not pretend that you wrote this soft-
ware. If you use it in a program, you must ac-
knowledge somewhere in your documentation
that you've used the IJG code.
In legalese:
The authors make NO WARRANTY or represen-
tation, either express or implied,with respect to
this software, its quality, accuracy, merchant-
ability, or fitness for a particular purpose. This
software is provided "AS IS", and you, its user,
assume the entire risk as to its quality and ac-
curacy.
SOFTWARE OR THE USE OR OTHER DEALINGS
IN THE SOFTWARE.
Curl
COPYRIGHT AND PERMISSION NOTICE
Copyright (c) 1996 - 2008, Daniel Stenberg,
This software is copyright (C) 1991-1998,
Thomas G. Lane.
All Rights Reserved except as specified below.
All rights reserved.
Permission is hereby granted to use, copy,
modify, and distribute this software (or portions
thereof) for any purpose, without fee, subject
to these conditions:
(1) If any part of the source code for this soft-
ware is distributed, then this README file must
be included, with this copyright and no-warranty
notice unaltered; and any additions, deletions,
or changes to the original files must be clearly
indicated in accompanying documentation.
(2) If only executable code is distributed, then
the accompanying documentation must state
that "this software is based in part on the work
of the Independent JPEG Group".
Permission to use, copy, modify, and distribute
this software for any purpose with or without
fee is hereby granted, provided that the above
copyright notice and this permission notice ap-
pear in all copies.
THE SOFTWARE IS PROVIDED "AS IS", WITH-
OUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO
THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF THIRD PARTY RIGHTS.
IN
NO EVENT SHALL THE AUTHORS OR COPY-
RIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
DAMAGES OR OTHER LIABILITY, WHETHER IN
AN ACTION OF CONTRACT, TORT OR
(3) Permission for use of this software is granted
only if the user accepts full responsibility for any
undesirable consequences; the authors accept
NO LIABILITY for damages of any kind.
OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE
USE OR OTHER DEALINGS IN THE SOFTWARE.
These conditions apply to any software derived
from or based on the IJG code, not just to the
ꢂꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
unmodified library. If you use our work, you
ought to acknowledge us.
To avoid entanglement with the Unisys LZW
patent, GIF reading support has
been removed altogether, and the GIF writer
has been simplified to produce
uncompressed GIFs. This technique does not
use the LZW algorithm; the
resulting GIF files are larger than usual, but are
readable by all standard
GIF decoders.
Permission is NOT granted for the use of any IJG
author's name or company name in advertising
or publicity relating to this software or products
derived from it. This software may be referred
to only as "the Independent JPEG Group's
software".
We specifically permit and encourage the use
of this software as the basis of commercial
products, provided that all warranty or liability
claims are assumed by the product vendor.
We are required to state that "The Graphics
Interchange Format(c) is the Copyright prop-
erty of CompuServe Incorporated. GIF(sm) is
a Service Mark property of CompuServe Incor-
porated."
ansi2knr.c is included in this distribution by per-
mission of L. Peter Deutsch, sole proprietor of
its copyright holder, Aladdin Enterprises of Men-
lo Park, CA. ansi2knr.c is NOT covered by the
above copyright and conditions, but instead
by the usual distribution terms of the Free Soft-
ware Foundation; principally,that you must in-
clude source code if you redistribute it. (See the
file ansi2knr.c for full details.) However, since
ansi2knr.c is not needed as part of any program
generated from the IJG code, this does not limit
you more than the foregoing paragraphs do.
CharisSIL OFL
SIL OPEN FONT LICENSE Version 1.1 - 26 Feb-
ruary 2007
PREAMBLE
The goals of the Open Font License (OFL) are to
stimulate worldwide development of collabora-
tive font projects, to support the font creation
efforts of academic and linguistic communities,
and to provide a free and open framework in
which fonts may be shared and improved in
partnership with others.
The Unix configuration script "configure" was
produced with GNU Autoconf.
It is copyright by the Free Software Foundation
but is freely distributable.
The same holds for its supporting scripts (con-
fig.guess, config.sub,ltconfig, ltmain.sh). An-
other support script, install-sh, is copyright
by M.I.T. but is also freely distributable.
The OFL allows the licensed fonts to be used,
studied, modified and redistributed freely as
long as they are not sold by themselves. The
fonts, including any derivative works, can be
bundled, embedded, redistributed and/or sold
with any software provided that any reserved
names are not used by derivative works. The
fonts and derivatives,however, cannot be re-
leased under any other type of license. The
requirement for fonts to remain under this li-
cense does not apply to any document created
using the fonts or their derivatives.
It appears that the arithmetic coding option of
the JPEG spec is covered by patents owned by
IBM, AT&T, and Mitsubishi. Hence arithmetic
coding cannot legally be used without obtaining
one or more licenses. For this reason,support
for arithmetic coding has been removed from
the free JPEG software.
DEFINITIONS
(Since arithmetic coding provides only a mar-
ginal gain over the unpatented Huffman mode,
it is unlikely that very many implementations
will support it.)
Font Software refers to the set of files released
by the Copyright Holder(s) under this license
and clearly marked as such. This may include
source files, build scripts and documentation.
So far as we are aware, there are no patent
restrictions on the remaining code.
Reserved Font Name refers to any names speci-
fied as such after the copyright statement(s).
The IJG distribution formerly included code to
read and write GIF files.
Original Version refers to the collection of Font
ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Software components as distributed by the
Copyright Holder(s).
under any other license. The requirement for
fonts to remain under this license does not ap-
ply to any document created using the Font
Software.
Modified Version refers to any derivative made
by adding to, deleting,or substituting -- in part
or in whole -- any of the components of the
Original Version, by changing formats or by
porting the Font Software to a new environ-
ment.
TERMINATION
This license becomes null and void if any of the
above conditions are not met.
DISCLAIMER
Author refers to any designer, engineer, pro-
grammer, technical writer or other person who
contributed to the Font Software.
THE FONT SOFTWARE IS PROVIDED "AS IS",
WITHOUT WARRANTY OF ANY KIND,EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED
TO ANY WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OF COPYRIGHT, PAT-
ENT, TRADEMARK, OR OTHER RIGHT. IN NO
EVENT SHALL THE COPYRIGHT HOLDER BE LI-
ABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY,INCLUDING ANY GENERAL, SPECIAL,
INDIRECT, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES, WHETHER IN AN ACTION OF CON-
TRACT, TORT OR OTHERWISE, ARISING
FROM, OUT OF THE USE OR INABILITY TO USE
THE FONT SOFTWARE OR FROM OTHER DEAL-
INGS IN THE FONT SOFTWARE.
PERMISSION & CONDITIONS
Permission is hereby granted, free of charge,
to any person obtaining a copy of the Font
Software, to use, study, copy, merge, embed,
modify, redistribute, and sell modified and un-
modified copies of the Font Software, subject to
the following conditions:
1) Neither the Font Software nor any of its indi-
vidual components,in Original or Modified Ver-
sions, may be sold by itself.
2) Original or Modified Versions of the Font Soft-
ware may be bundled,redistributed and/or sold
with any software, provided that each copy
contains the above copyright notice and this
license. These can be included either as stand-
alone text files, human-readable headers or
in the appropriate machine-readable metadata
fields within text or binary files as long as those
fields can be easily viewed by the user.
3) No Modified Version of the Font Software
may use the Reserved Font Name(s) unless ex-
plicit written permission is granted by the corre-
sponding Copyright Holder. This restriction only
applies to the primary font name as presented
to the users.
4) The name(s) of the Copyright Holder(s) or
the Author(s) of the Font Software shall not be
used to promote, endorse or advertise any
Modified Version, except to acknowledge the
contribution(s) of the Copyright Holder(s) and
the Author(s) or with their explicit written
permission.
5) The Font Software, modified or unmodified,
in part or in whole,must be distributed entirely
under this license, and must not be distributed
ꢂꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited United States Warranty for Digital Audio Video (“DAV”) Product
Toshiba America Information Systems, Inc. ("TAIS") makes the following limited warranties to original consum-
ers in the United States. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER
PURCHASER OR ANY PERSON RECEIVING THIS DAV PRODUCT AS A GIFT FROM THE ORIGINAL
CONSUMER PURCHASER AND TO NO OTHER PURCHASER OR TRANSFEREE. DAV PRODUCTS
PURCHASED IN THE U.S.A. OR PUERTO RICO AND USED ANYWHERE OUTSIDE OF THE U.S.A. OR
PUERTO RICO, INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, ARE NOT COVERED
BY THESE WARRANTIES. DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF THE U.S.A. OR
PUERTO RICO, INCLUDING, WITHOUT LIMITATION, CANADA AND MEXICO, AND USED IN THE
U.S.A., ARE NOT COVERED BY THESE WARRANTIES.
Limited 90-Day Warranty on Parts and Labor
TAIS WARRANTS THIS PRODUCT AND ITS PARTS AGAINST DEFECTS IN MATERIALS OR WORK-
MANSHIP FOR A PERIOD OF 90-DAYS FROM THE DATE OF ORIGINAL RETAIL PURCHASE. DUR-
ING THIS PERIOD, TAIS WILL, AT TAIS' SOLE DESCRETION, REPAIR OR REPLACE A DEFECTIVE
PART/PRODUCT WITH A NEW OR REFURBISHED PART/PRODUCT WITHOUT CHARGE TO YOU
FOR PARTS OR LABOR. ANY PART OR PRODUCT REPLACED UNDER THIS LIMITED WARRANTY
BECOMES THE PROPERTY OF TAIS. IN SOME CASES, YOU MAY BE RESPONSIBLE FOR DELIVERING
THE PRODUCT TO A SERVICE CENTER.
Rental Units – The limited warranty period begins on the date of the first rental or thirty (30) days after the
date of shipment to the rental firm, whichever comes first.
Your Responsibility - Read the owner’s manual thoroughly before installing or operating this Product.
Complete and mail the enclosed product registration card (if provided) or register your Product online at www.
support.toshiba.com. Registration of your Product will enable TAIS to contact you in the unlikely event a safety
notification is required under the U.S. Consumer Product Safety Act. Failure to complete and return the product
registration card does not diminish your warranty rights.
THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS:
(1) This Limited Warranty is extended only to the original purchaser and only covers product purchased as
new. (2) A purchase receipt or other proof of the original purchase date is required for warranty service. (3)
All warranty servicing of this Product must be performed by an Authorized TAIS Service Provider. (4) The war-
ranties from TAIS are effective only if this Product is purchased and operated in the U.S.A. or Puerto Rico. (5)
Removal and reinstallation of product that is mounted in such a manner as to impede normal service is not
covered under these warranties. This includes wall mounts, custom cabinets and other installation methods
that do not provide for direct and immediate access to the product for service purposes. Labor service charges
for set installation, setup, adjustment of customer controls, and installation or repair of antenna, satellite or
cable systems are not covered by this limited warranty. (6) Reception or other problems caused by inadequate
antenna systems, misaligned satellite dishes, improperly installed cable drops or use with non-standard signals
or sources are your responsibility and are not covered by this limited warranty. (7) This limited warranty is void
if the product is used outside the range of the temperature (heat/cold) and/or moisture operating conditions
as outlined in the product’s specification listed in the Owner’s manual, or if the product is exposed to excessive
smoke, dust, or other airborne contaminants or environmental conditions. (8) Warranties extend only to defects
in materials or workmanship as limited above, and do not extend to any Product or parts that have been lost
or discarded by you or to damage to the Product or parts caused by fires, misuse, abuse, accident, Acts of God
(such as lightning or fluctuations in electric power), improper installation, improper maintenance, or use in vio-
lation of instructions furnished by TAIS; use or malfunction through simultaneous use of this Product and con-
nected equipment; or to units that have been modified or had the serial number removed, altered, defaced, or
rendered illegible. (9) Product purchased “AS-IS” or “With known faults, defects or problems” are not covered
by this limited warranty. (10) Product previously owned or registered by a consumer and resold is not covered
by this limited warranty. (11) Product that is refurbished and resold is not covered under this limited warranty.
How to Obtain Warranty Service
After following all of the operating instructions in the Owner’s manual, review the section entitled "Concierge"
follow the instructions provided on the web site or please contact TAIS' Consumer Solution Center toll free at
1-800-631-3811. You must present upon request your original bill of sale or other proof of purchase including
the serial number for in warranty service.
ꢂꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
ALL WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A., INCLUDING THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE EX-
PRESSLY LIMITED TO THE DURATION OF THE LIMITED WARRANTIES SET FORTH ABOVE. WITH
THE EXCEPTION OF ANY WARRANTIES IMPLIED BY THE LAW OF ANY STATE OF THE U.S.A. AS
HEREBY LIMITED, THE FOREGOING LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES, GUARANTEES, AGREEMENTS, AND SIMILAR OBLIGATIONS OF TAIS WITH
RESPECT TO THE REPAIR OR REPLACEMENT OF ANY PARTS. IN NO EVENT SHALL TAIS BE LIABLE
FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, LOST
PROFITS, BUSINESS INTERRUPTION, OR MODIFICATION OR ERASURE OF RECORDED DATA
CAUSED BY USE, MISUSE OR INABILITY TO USE THIS PRODUCT).
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of these
warranties in any manner whatsoever. The time within which an action must be commenced to enforce any
obligation of TAIS arising under this limited warranty or under any statute, or law of the United States or any
state thereof, is hereby limited to ninety (90) days from the date you discover or should have discovered, the
defect. This limitation does not apply to implied warranties arising under the law of any state of the U.S.A.
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE
OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE IN THE U.S.A. SOME STATES OF THE
U.S.A. DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, WHEN AN
ACTION MAY BE BROUGHT, OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSE-
QUENTIAL DAMAGES. THEREFORE, THE ABOVE PROVISIONS MAY NOT APPLY TO YOU UNDER
SUCH CIRCUMSTANCES.
ꢂꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.
|