Toshiba Blu ray Player BDX1100KC User Manual
Blu-ray Disc Player  
BDX1100KC  
Owner’s Manual  
TM  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Important  
IMPORTANT SAFETY INSTRUCTIONS  
1. Read these instructions.  
2. Keep these instructions.  
3. Heed all warnings.  
4. Follow all instructions.  
Safety and important notice  
5. Do not use this apparatus near water.  
6. Clean only with dry cloth.  
7. Do not block any ventilation openings. Install in  
accordance with the manufacturer’s instructions.  
8. Do not install near any heat sources such as  
radiators, heat registers, stoves, or other apparatus  
(including amplifiers) that produce heat.  
WARNING:TO REDUCE THE RISK OF FIRE OR  
ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS  
TO RAIN OR MOISTURE.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
9. Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug has  
two blades and a third grounding prong. The wide blade  
or the third prong are provided for your safety. If the  
provided plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet.  
10. Protect the power cord from being walked on or  
pinched particularly at plugs, convenience receptacles,  
and the point where they exit from the apparatus.  
11. Only use attachments/accessories specified by the  
manufacturer.  
CAUTION:  
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT  
REMOVE COVER (OR BACK). NO USER SERVICEABLE  
PARTS INSIDE. REFER SERVICING TO QUALIFIED  
SERVICE PERSONNEL.  
The important note is located on the rear or  
bottom of the cabinet.  
12. Use only with the cart,  
stand, tripod, bracket, or table  
specified by the manufacturer,  
or sold with the apparatus.  
When a cart is used, use caution when moving the cart/  
apparatus combination to avoid injury from tip-over.  
13. Unplug this apparatus during lightning storms or  
when unused for long periods of time.  
The lightning flash with arrowhead symbol, within an  
equilateral triangle, is intended to alert the user of the  
presence of uninsulated 'dangerous voltage' within the  
product' s enclosure that may be of sufficient magnitude  
to constitute a risk of electric shock to people.  
14. Refer all servicing to qualified service personnel.  
Servicing is required when the apparatus has been  
damaged in any way, such as power-supply cord or plug  
is damaged, liquid has been spilled or objects have fallen  
into the apparatus, the apparatus has been exposed to  
rain or moisture, does not operate normally, or has been  
dropped.  
The exclamation point within an equila-teral triangle is  
intended to alert the user of the presence of important  
operating and maintenance (servicing) instructions in the  
literature accompanying the appliance.  
Additional Safety Instructions  
15. Do not overload wall outlets; extension cords, or  
integral convenience receptacles as this can result in a  
risk of fire or electric shock.  
The symbol for CLASS II (Double Insulation)  
16. Apparatus shall not be exposed to dripping or  
splashing and no objects filled with liquids, such as  
vases, shall be placed on the apparatus.  
17. Keep your fingers well clear of the disc tray as it is  
closing. Neglecting to do so may cause serious personal  
injury.  
18. Do not place a heavy object on or step on the  
apparatus. The object may fall, causing serious personal  
injury and serious damage to the apparatus.  
19. Do not use a cracked , deformed, or repaired disc.  
These discs are easily broken and may cause serious  
personal injury and apparatus malfunction.  
ENERGY STAR® qualified DVD. Products that earn the  
ENERGY STAR prevent green house gas emissions by  
meeting strict energy efficiency guidelines set by the U.S.  
Environmental Protection Agency and the U.S.  
Department of Energy. ENERGY STAR and the ENERGY  
STAR mark are registered U.S. marks.  
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC  
SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR  
MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT  
INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET.  
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.  
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH  
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.  
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES,  
INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE  
DANS LA BORNE CORRESPONDANTE DE LA PRISE ET  
POUSSER JUSQU' AU FOND.  
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS  
AND INSTRUCTIONS GIVEN IN THIS OWNER' S MANUAL  
AND THOSE MARKED ON THE UNIT. RETAIN THIS  
BOOKLET FOR FUTURE REFERENCE.  
CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR  
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN  
MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.  
20. If the apparatus should smoke or smell,immediately  
disconnect the power cord from the wall outlet. Wait until  
the smoke or smell stops, then ask your dealer for a  
check and repair. Neglecting to do so may cause fire.  
21. While it is thundering, do not touch the connecting  
cables or the apparatus.  
22. Warning: To prevent the spread of fire, keep candles  
or other open flames away from this product at all times.  
CAUTION:  
- This Digital Video Disc Player employs a Laser System.  
- To ensure proper use of this product, please read this  
owner’s manual carefully and retain for future reference  
Should the unit require maintenance, contact an  
authorized service location.  
- Use of controls or adjustments or performance of  
procedures other than those specified herein may result  
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.  
in hazardous radiation exposure.  
- To prevent direct exposure to laser beam, do not try to  
open the enclosure.  
Notice for Trademark  
- Visible and invisible laser radiation when open and  
interlocks defeated.  
DO NOT STARE INTO BEAM.  
HDMI, the HDMI logo and High-Definition Multimedia  
Interface are trademarks or registered trademarks of HDMI  
Licensing LLC in the United States and other countries.  
FCC NOTICE:  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to part 15 of the FCC Rule.  
These limits are designed to provide reasonable  
protection against harmful interference in a residential  
installation. This equipment generates, uses, and can  
radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause  
harmful interference to radio communications.However,  
there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause  
harmful interference to radio or television reception,  
which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the  
interference by one or more of the following  
measures:  
‘Blu-ray Disc’ and ‘Blu-ray Disc’ logo are trademarks.  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D  
symbol are trademarks of Dolby  
Laboratories.  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and  
receiver.  
- Connect the equipment into an outlet on a circuit  
different from that to which the receiver is connected.  
- Consult the dealer or an experienced radio/TV  
technician for help.  
Changes or modifications made to this equipment,  
not expressly approved by Toshiba, or parties authorized  
by Toshiba, could void the user' s authority to operate  
the equipment.  
Manufactured under license under U.S. Patent #’s:  
5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616;  
6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872  
& other U.S. and worldwide patents issued & pending.  
DTS and the Symbol are registered trade-marks, & DTS-  
HD, DTS-HD Master Audio | Essential and the DTS logos  
are trademarks of DTS, Inc. Product includes software. ©  
DTS, Inc. All Rights Reserved.  
Be aware that this equipment is still powered when in  
standby mode. To disconnect this equipment completely  
from the mains power, pull out the power plug from the  
wall outlet.  
The mains plug is used as the disconnect device, the  
disconnect device shall remain readily operable.  
BONUSVIEW ™  
‘BD-Live’ and the ‘BONUSVIEW’ are trademarks of Blu-ray  
Disc Association.  
Note about Recycling  
This unit’s packaging materials are recyclable and can be  
reused. Please dispose of any materials in accordance  
with your local recycling regulations.  
‘AVCHD’ and the ‘AVCHD’ logo are trademarks of  
Panasonic Corporation and Sony Corporation.  
Batteries should never be thrown away or incinerated but  
disposed of inaccordance with your local regulations  
concerning chemical wastes.  
‘DVD Video’ is a trademark of DVD Format/Logo Licensing  
Corporation.  
Copyright notice  
This product incorporates copyright  
protection technology that is protected by U.S. patents  
and other intellectual property rights. Use of this  
copyright protection technology must be authorized by  
Rovi Corporation, and is intended for home and other  
limited viewing uses only unless otherwise authorized by  
Rovi Corporation. Reverse engineering or disassembly is  
prohibited.  
Oracle and Java are registered trademarks of Oracle  
and/or its affiliates. Other names may be trademarks  
of their respective owners.  
ꢂ
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 Your Product  
BD discs that  
can be played  
Region  
Regions Codes  
North America,  
Central America,  
South America,  
Korea, Japan, Taiwan,  
Hong Kong and  
South East Asia.  
Both the Blu-ray Disc player and the discs  
are coded by region. These regional codes  
must match in order to play the disc. If the  
codes do not match, the disc will not play.  
The Region Number for this Blu-ray Disc  
player is described on the rear panel of the  
Blu-ray Disc player.  
Europe, Greenland,  
French territories,  
Middle East, Africa,  
Australia and  
Region  
DVD discs that  
can be played  
New Zealand.  
U.S.A. and  
Canada regions  
ALL  
ALL  
ALL  
ALL  
ALL  
ALL  
1
2
3
4
5
6
India, China, Russia,  
Central and  
South Asia.  
U.K.,  
Europe regions and  
Japan  
Asia Pacific,  
Taiwan, Korea  
Feature highlights  
High-Definition entertainment  
Australia,  
New Zealand,  
Latin America  
Watch high-definition content disc with  
HDTV (High Definition Television). Connect  
it through a high speed HDMI cable (1.3 or  
category 2). You can enjoy excellent  
picture quality up to 1080p  
resolution with the frame rate of 24 frames  
per second with progressive scan output.  
BD-Live  
Connect this player to the movie studios  
website via the LAN jack to access a  
variety of up-to-date content (e.g.  
refreshed previews and exclusive special  
features).  
Russia and  
India regions  
China, Calcos Islands,  
Walls and Futuna  
Islands  
Blu-ray Disc Java  
Blu-ray Disc Java(BD-J) Application  
The BD-ROM format supports Java for  
interactive functions. “BD-J” offers content  
providers almost unlimited functionality  
when creating interactive BD-ROM titles.  
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product overview  
Main Unit  
8
7
6
5
4
3
2
1
NO  
a
b
c
d
e
f
g
h
Control  
Function  
Insert an SD card  
SD card slot  
Turns the power on or restores the unit to the standby mode.  
Playback/Pause.  
1
B/X  
Stop play.  
x
Display panel  
IR Sensor  
Show information about the current status of this unit.  
Point the remote control at the IR sensor.  
Open or close the disc compartment.  
Loads a disc into the disc drive.  
Z
Disc compartment  
1
2
3
4
5
6
NO  
a
Control  
Function  
Connects to a standard AC outlet.  
AC power cord  
COAXIAL jack  
b
Output digital audio signals when connecting the coaxial digital cable.  
ANALOG AUDIO OUTPUT  
jacks  
c
Outputs audio signals to a connected TV or AV amplifier.  
d
e
f
VIDEO OUTPUT jack  
HDMI OUTPUT jack  
LAN jack  
Output video signals to a connected TV.  
Outputs video/audio signals to a connected TV, monitor or AV amplifier.  
Connect to a TV, monitor or AV amplifier equipped with HDMI input.  
Use this to connect to a network with an always-on broadband connection. It is  
reserved for future usage of BD-Live..  
ꢄ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
REMOTE SIGNAL EMITTER  
• Point remote control to the sensor on  
the front panel  
ON / STANDBY  
• To switch the BD player to ON or  
standby mode  
OPEN/CLOSE  
• Open/ Close the disc tray  
SETUP  
AUDIO  
Enters or exits the system setup menu  
• To select the sound stream; press  
repeatedly to select different audio  
streams available in your disc  
MC(Media Center)  
To OPEN/CLOSE Media Center  
•
SUBTITLE  
PIP AUDIO  
• To display subtitle; press repeatedly  
to select different subtitles available  
in your disc  
Switch the secondary audio  
of secondary video(PIP) to on or off  
SEARCH  
ANGLE  
• To search a title, chapter track or  
,
Switch the camera angle during playback  
•
playing time  
CLEAR  
HDMI  
•
To clear an entry or the bookmark and program you set  
To change resolution of HDMI video  
output to fit TV. Such as 1080P,  
REPEAT  
•
Selects various repeat mode.  
1080i… etc.  
PREV & NEXT  
REPEAT A-B  
• To repeat from A to B  
•
Skip to previous/next chapter/ title/track  
PIP (Picture in Picture)  
STOP  
• Stop playback  
/
• Switch on or off the secondary video  
Instant replay/instant search  
F.R & F.F  
Fast reverse/ fast forward  
RETURN  
PLAY/PAUSE  
•
Return to previous menu  
• Start/Pause playback  
POP MENU/MENU  
PROGRAM  
• To display a menu included on many  
BD/DVD video discs  
To access program list.  
•
BOOKMARK  
TOP MENU  
To bookmark at any point during playback  
•
• To display the disc title during playback  
DISPLAY  
ZOOM  
• To display a window to locate a title,  
chapter or track  
To zoom out/in  
•
DIGEST  
To access JPEG thumbnail  
view during playback  
OK  
•
• Acknowledge/ Confirm menu selection  
Number Buttons  
• Navigation/ Cursor buttons for moving  
to the left / right / up / down  
Select numbered items in a menu  
Press to enter track/ chapter/ title  
numbers/password directly  
• Press  
during JPEG playback to rotate the  
current photo track, but the JPEG playback will  
be paused  
•
Do a slow forward during normal  
playback  
Advance the picture frame by  
frame during pause mode  
ꢀꢀꢀ  
•
ꢅ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Option 2: Connect to the HDMI Jack  
This type of connection provides better  
picture quality  
3 Connections  
Make the following connection to use this  
product.  
Connecting to a TV  
Connect the product to TV to view disc play,  
Select the best video connection that TV  
can support:  
Option 1: Connect to the composite video  
jack(VIDEO)  
HDMI IN  
Option 2: Connect to the HDMI Jack  
1. Connect a HDMI cable from the HDMI  
output jack on this product to the HDMI  
input jack on the TV.  
Option 1: Connect to the composite  
video jack (VIDEO)  
You can connect this product to a TV  
through the composite video cable which  
provides standard picture quality.  
Notes:  
– If the TV has a DVI connector only, connect  
via an HDMI/DVI adapter. Connect an audio  
cable for sound output.  
AUDIO IN  
– You can opꢀmize the video output by  
pressing the HDMI buꢁon repeatedly to select  
the best resoluꢀon which the TV can support.  
– When the player is connected to both VIDEO  
OUTPUT jack and HDMI OUTPUT jack, resoluꢀon is  
set to 720p/1080i/1080p, there will be no video  
output through VIDEO OUTPUT jack.  
VIDEO IN  
1. Connect a composite cable from the  
VIDEO OUTPUT jack and analogue AUDIO  
OUTPUT jacks on this product to the video  
input jack(yellow) and audio input  
jacks(white/red) on the TV.  
Note:  
-Connect this unit directly to the TV. If the  
composite Audio / video cables are connected  
to a VCR, pictures may be distorted due to the  
copy right protecꢀon system.  
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inserting an SD Card  
Optional Connection  
An SD card provides an additional memory  
to software upgrade and enjoy BD-Live  
bonus content. You can also enjoy playing  
back MP3/JPEG/MPEG4 files stored in the  
card.  
Option 1: Connect to digital amplifier/  
receiver  
Option 2: Connect to analogue stereo  
system  
Option 3: Connect to network  
Option 1: Connect to the digital  
amplifer/receiver  
Route the sound from this player to other  
device to enhance audio output.  
DIGITAL AUDIO  
INPUT  
COAXIAL  
1. Gently push the SD card, with its label  
side facing up, into the SD card slot until it  
clicks.  
Notes:  
- Insert only SD Card to the SD card slot on this  
product.  
- When you enjoy BD-live bonus content, as  
your local storage, use a 1 GB or larger SD  
Card.  
- TOSHIBA does not guarantee 100%  
compaꢀbility with all SD Cards.  
1. Connect a coaxial cable from the  
COAXIAL jack on this product to the  
COAXIAL jack on the device.  
Connect Power  
Option 2: Connect to an analogue  
stereo system  
1. Connect the AC power cable to:  
- the wall socket.  
AUDIO IN  
• The product is ready to be set up for use.  
Notes:  
– Before connecꢀng the AC power cord, ensure  
you have completed all other connecꢀons.  
– Risk of product damage! Ensure that the power  
supply voltage corresponds to the voltage printed  
on the back of the unit.  
– The type plate is located on the back of the unit.  
1. Connect the audio cable from the  
analogue AUDIO OUT jacks on this product  
to the audio input jacks on the system.  
Option 3: Connect to network  
Connect this product to the network to  
enjoy BD-Live bonus content.  
1. Connect the network cable from the LAN  
jack on the product to the LAN jack on the  
network system.  
ꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Preparation  
Setting up the player  
Always follow the instructions in this chapter  
in sequence.  
Note:  
Find the correct viewing channel  
1.Press 1 to turn on this product.  
2.Turn on the TV and switch to the correct  
video-in channel (refer to the TV user  
manual on how to select the correct  
channel).  
- Use of controls or adjustments or  
performance of procedures other than herein  
may result in hazardous radiaꢀon exposure or  
other unsafe operaꢀon.  
Prepare the remote control  
Initial Setting  
When you turn on this unit for the first time,  
you need to follow these steps.  
1. A welcome page will be displayed when  
this product is powered on.  
2. Press OK to enter language setting.  
3. Select your desired language,  
resolution and aspect ratio using /, then  
press OK.  
4. Press SETUP to exit the Setup menu.  
1.Open the battery compartment.  
2.Insert two R03 batteries with correct  
polarity (+/-) as indicated.  
3 Close the battery compartment.  
Notes:  
- If you are not going to use the remote control  
for a long ꢀme, remove the baꢁeries.  
- Do not use old and new or different types of  
baꢁeries in combinaꢀon.  
Use the SETUP menu  
1.Press SETUP to display the Setup menu  
when the BD Player is playing or no disc.  
And press SETUP to exit the Setup menu.  
Tip:  
- When playing a high-definiꢀon sources, you must  
press STOP buꢁon to enter SETUP interface.  
- Risk of explosion! Keep baꢁeries away from  
heat, sunshine or fire. Never discard baꢁeries in  
fire.  
Select menu display language  
1.Press SETUP  
[General Setting] menu is displayed  
2.Select [Language], then press   
3.Select [OSD], then press .  
- The language options may vary for  
different regions.  
• The maximum operable ranges from  
the unit are as follows.  
- Line of sight: approx. 9 m  
- Either side of the centre: approx. 7 m  
within 30°  
- Above: approx. 7 m within 30°  
- Below: approx. 7 m within 30°  
4.Press /to select a language, then  
press OK  
Note:  
- If this disc player is connected to a HDMI CEC  
compliant TV, skip this setting. It switches  
automatically to the same OSD menu language  
as per your TV setting.  
7 m  
9 m  
7 m  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press F.R m to fast reverse through the  
disc. The fast reverse speed changes based on  
how many times you pressed the button.  
The speed will increase through the  
following sequence:  
5 Playback  
Playback Functions  
2X, 4X, 8X, 16X, 32X  
Basic Playback  
4. Press B/X to resume playback.  
1. Press button on the front panel or the  
remote control, your BD player will turn on.  
The unit will take around 20 seconds to  
warm up.  
2. Turn on the TV, and then select the input  
setting on the TV that matches the  
connection method you used to connect your  
player.  
Instant Search and Instant Replay  
1.During playback, press and hold Mbutton,  
you can skip 30 seconds forward.  
2.During playback, press and hold m  
button, you can instant replay the content  
from 10 seconds before.  
3. Press OPEN/CLOSE Z to slide out the disc  
tray.  
Previous and Next  
4. Place a disc on the disc tray with the label  
facing up, and then press OPEN/CLOSE Z to  
slide back and close the disc tray.  
The disc loading time depends on the types  
of disc you are loading, and loading a Blu-ray  
Disc will take longer time.  
5. If the disc does not start playing  
automatically, please press B/X to start  
playback.  
During playback, press PREV . button,  
and you can skip back to the previous  
chapter or track. Each press of this button  
will allow you to skip a chapter or track till  
the beginning of the disc.  
Press of NEXT > button during playback  
will allow you to skip the playback to next  
chapter or track.  
Slow Forward  
6. If a Blu-ray disc or DVD menu displays,  
use cursor buttons to select PLAY. Then,  
press OK to confirm.  
1. Press =B during normal playback. The slow  
forward speed is 1/16 in default.  
2. To change slow forward speed, press =B  
repeatedly, and the slow forward speed will be  
changed in the following sequence: 1/16, 1/8,  
1/4, 1/2, normal.  
7. To eject the disc, press OPEN/CLOSE Z.  
Pause playback  
1. Press B/X to pause playback. The  
sound will be muted.  
2. Press B/X to resume the playback.  
3. To exit slow forward mode and return to  
normal playback, press B/X.  
Step Forward  
Stop playback  
Use this feature to help you to enjoy the  
video frame by frame.  
1. Press B/X during normal playback, then  
playback will change to pause state.  
2. Press =B repeatedly to advance the  
picture frame by frame.  
1. Press STOP button once to go to resume  
mode, the TV screen will show the resume logo.  
2. Press STOP twice to stop the playback  
completely.  
3. Press B/X to resume playback from the  
point where playback is stopped or from the  
beginning of the disc after the playback is  
completely stopped.  
3. Press B/X to resume normal playback.  
HDMI  
When there is file or disc being played, it is  
not allowed to switch resolution through  
the HDMI button of the Remote Control.  
Not all Blu-ray Discs support the resume feature.  
Fast Forward and Fast Reverse  
1. Press F.F M to fast forward through the  
disc. The fast forward speed changes based on  
how many times you pressed the button. The  
speed will increase through the following  
sequence:  
2X, 4X, 8X, 16X, 32X  
2. Press B/X to resume playback.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
current number of angle, and the second “X”  
indicates total number of angle.  
Not all BD or DVD has the multi-angle  
feature. The screen will take around 5  
seconds to change.  
Advanced Playback  
DISPLAY  
Press this button and the screen will display  
some information about disc, such as: Title  
number, Chapter number, Track number,  
Elapsed Time, Mode, Audio, Angle, and  
Subtitle languages. Press this button again to  
turn off the information display.  
During DVD/CD playback, you may edit the  
chapter and track.  
TOP MENU  
You may press this button at any time, and  
the BD or DVD video disc playback will pop  
up the disc menu.  
POP MENU/MENU  
During Blu-ray Disc playback, press POP  
MENU/MENU to display the disc title, and the  
playback will not be stopped even the menu is  
on the screen.  
REPEAT  
Press REPEAT repeatedly to select different  
repeat modes.  
1. Press the / / / buttons to select  
an option, then press OK to confirm.  
2. Press POP MENU/MENU to close the  
menu.  
DuringDVDplayback, pressPOPMENU/MENU  
to open the disc menu.  
During VCD playback, press POP MENU/MENU  
to switch PBC On/Off.  
During displaying SD card and Data Disc file  
content in media center, press POP MENU/  
MENU to add the Photo/Music/Video files to  
the playlist.  
DVD:Repeat Chapter, Repeat Title, and All.  
VCD PBC Off/CD/JPEG/MP3:Repeat Track and  
All.  
A-B  
To play certain section within the video or  
song, press A-B button to set the start-point.  
Then, press A-B button again to set the end-  
point and complete the setting. The selected  
section will be played repeatedly.  
Press A-B button the third time to cancel this  
function.  
The end point cannot be set until 5 seconds  
of playback has elapsed from the start point.  
SEARCH  
During playback, press SEARCH button to  
edit Title, Chapter, and Time.  
Press / and OK button on the remote  
control to select Title, Chapter, or Time. Then  
press the numeric buttons or / and then  
press OK. The playback will skip to the  
desired location.  
1.Press / / / buttons to select an  
option under the Photo/Music/Video files.  
2. In the file browser, press to select the  
file(s) to be added to the playlist. "√ "  
will appear beside the selected files.  
3. Press POP MENU/MENU button, a pop up  
menu will appear, then press / and OK  
button to select "Add to Playlist" to add the  
files to the Playlist. "Select all" and "Clear all"  
options are also available. Select "Cancel" to  
exit the pop up menu.  
For Time Search, press / to select Title  
or Chapter time search.  
SUBTITLE  
All the selected files will be added to the  
"Playlist" folder. You can play or delete the  
files in the playlist.  
Press this button repeatedly and the screen  
will display “X/XX XXX” or “Off”. The “X”  
indicates the current number of this  
language; “XX” indicates the total number of  
language; “XXX” indicates the language.  
The number of available languages depends  
on the disc.  
Press POP MENU/MENU to delete the selected  
files in"Playlist"  
SETUP  
Press the SETUP button, and the screen will  
display some information about the player,  
such as:  
• General Setting  
RETURN  
• Display Setting  
Press this button to return to the previous  
on-screen menu in setup menu such as  
Information, Parental Control, Country Code  
etc.  
• Audio Setting  
• System Information  
PROGRAM  
During CD/DVD/VCD playback, you can press  
this button to edit the sequence of the  
playlist.  
During MP3/JPEG/VIDEO playback , press  
return once, it will return back to Media  
Center page.  
BOOKMARK  
During VCD disc playback and PBC On is  
selected, press the button to return to PBC  
Menu.  
During VCD/DVD disc playback,press the  
BOOKMARK button to add the bookmark;  
press and hold for a few seconds to display  
the list of bookmark which you added before  
on the screen, then you can press the OK  
button to select the bookmark or CLEAR  
button to delete the bookmark.  
ANGLE  
During playback, press this button to change  
the angle of the picture. The screen will  
display “Angle X/X.” The first “X” indicates the  
1ꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
AUDIO  
[Subtitle Style]: When you play the BD or DVD  
disc and if it has external subtitle, you will see  
it in OSC menu.  
Press AUDIO button on the remote control to  
select the audio streams that set within the  
Blu-ray or DVD disc.  
[Bitrate]:Use/toselectyourdesiredBitrate.  
[Still Off]: Close the Still feature of DVD disc.  
For some DVD discs, a certain video picture  
will be freeze as a still picture during the  
process of playback to let user better view the  
certain picture. To continue playback, select  
Still Off.  
The screen will display:  
AUDIO: X / XX XXX XXXX  
“X” - the Current Audio Stream Number  
“XX” - The total number of Audio Stream  
“XXX” - Audio Language  
“XXXX” - Audio Technology  
MC  
[Ins Search]: Instant skip 30 seconds for  
search.  
Press this button to play media files in the SD  
card.  
[Ins Replay]: Replay the content from 10  
seconds before.  
ZOOM  
Tip:  
1. Press ZOOM button repeatedly to Zoom in/  
out playback in the video.  
- The specified operaꢀon for each item will vary with  
disc types. And some items are available only when  
the disc is supportable.  
Zoom mode : Zoom 2x -> Zoom 3x -> Zoom  
4x -> Zoom 1/2 -> Zoom 1/3 -> Zoom 1/4.  
DIGEST  
Blu-ray Disc Bonus View  
During playback of JPEG disc, press DIGEST  
to view a page of 12 thumbnail images.  
- Use / / / to select an image.  
Press OK to view the selected image in full-  
screen and subsequent images will be  
displayed one after another automatically.  
- Press PREV  
previous or next thumbnail screen.  
PIP AUDIO  
Playing Secondary Video (Picture-in-Picture)  
and Secondary Audio is for Blu-ray Disc only.  
Secondary video can be played from a disc  
compatible with the Picture-in-Picture (PIP)  
function.  
For the playback method, refer to the  
instructions for the disc.  
1. Turn on secondary video by pressing the  
PIP button.  
2. Press the PIP AUDIO button to select the  
secondary audio, and select an option except  
Off. The secondary audio is opened, you can  
hear the disc secondary video sound.  
In order to hear the secondary audio, the PIP  
feature on the disc must be turned on.  
3. Press the PIP AUDIO button again to turn  
off the secondary video.  
/ NEXT  
to view the  
Press PIP AUDIO button to open the  
secondary audio of secondary video(PIP’s  
sub-window video).  
OSC  
Press OSC to open On Screen Control menu  
during playback. In this menu, you can make  
some playback-related control.  
The on screen control contains following  
items:  
[Title]: The title in current playback/titles in  
total. Select your desired title to playback.  
[Chapter]: The chapter in current playback/  
chapters in total. Select your desired chapter  
to playback.  
Primary video  
[Time]: View the elapsed/remaining playback  
time of title/chapter. Use / to view: the  
elapsed playback time of title, the remaining  
playback time of title, the elapsed playback  
time of chapter, and the remaining playback  
time of chapter.  
[Mode]: Select playback mode among  
shuffle, random, and normal.  
[Audio]: The BD/DVD disc’s soundtrack  
language. Use / to view the audio  
available in the disc and select your desired  
Audio type.  
[Angle]: The angle view of current playback/  
the angles in total. Please reference  
Playback>Angle to see more detailed info.  
Use / to select your desired angle view.  
[Subtitle]: The Subtitle in current playback.  
Use / to view the subtitles available in  
the disc and select your desired subtitle type  
or turn it off.  
Secondary video  
with Secondary Audio  
This function is not available when the  
primary video is played in Search, Slow-  
Motion, or Frame-by-Frame or Fast Forward/  
Reverse mode.  
To listen to the secondary audio, the digital  
audio output must be set to "Bitstream",  
"Re-encode" or "PCM". Otherwise, only the  
primary audio can be heard.  
Notes:  
-Not all the BD discs can support this funcꢀon.  
-High Definiꢀon PIP (Second Video) is not supported.  
1ꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
use one single remote control to control  
all REGZA-LINK-compliant devices that  
are connected through HDMI connectors.  
{On} - Turns on REGZA-LINK features.  
-With CEC on, during TV standby with  
the BD player on, pressing SETUP, PLAY/  
PAUSE will power on the TV.  
6 Customizing  
This section describes the various setting  
option of this BD player.  
If the setup option is grayed out, it means  
the setting cannot be changed at the  
current state.  
{Off} - Disables REGZA-LINK features.  
• [Easy Setup]  
General Setting  
Re-configure some settings. It is the same  
as "Load Default" of steps 4-8.  
Tip:  
1. Press SETUP button on the remote  
control.The Setup Menu appears.  
For seꢂng osd and TV resoluꢀon and TV aspect.  
[Load Default]  
... General Setting ...  
•
Screen Saver  
Disc Auto Playback  
CEC  
On  
System  
Reset all settings of BD player to initial  
default state.  
- Follow the instruction on the TV screen  
to confirm the default setting operation.  
1. Select Load Default.  
2. A dialogue box pops up shown as  
below. Select OK .  
Load Default  
On  
Language  
Playback  
Security  
Network  
On  
Easy Setup  
Load Default  
More...  
More...  
Move cursor key to select menu option  
then use “OK” key to select  
SETUP Exit  
2. Press to select an option, then press  
to access.  
3. Press /to select a setup option and  
press   
Do you want to load default?  
4. Select the setting you wish to change  
and press OK to confirm.  
- Press to return to the previous menu.  
Cancel  
OK  
3.It may take awhile when loading  
default is in progress. Please wait...  
[System]  
Load Default  
To change the following system option to  
personalize your BD player.  
Loading default, please wait...  
30%  
•
[Screen Saver]  
Turn On or Off the screen saver mode.  
It helps to protect the TV screen.  
{ On } – Set the screen saver active  
after approximately 10 minutes with no  
operation.  
4. TV will display as follow:  
Welcome  
to the Toshiba BD Player Setting Wizard.  
Some simple settings are suggested before you  
begin. You can also access detailed settings  
from the Setup Menu.  
- The BD player will switch to standby  
mode if there is no operation after the  
screen saver is engaged for  
approximately 10 minutes.  
{ Off } – Turn off the screen saver  
mode .  
OK  
Next  
5. Press OK, enter language setting.  
Press/to select a language option.  
•
•
[Disc Auto Playback]  
Choose  
EnJlish  
Turn On or Off the disc automatic  
playback switching mode.  
{On} – The disc playback automatically  
after loading.  
{Off} – Turn off disc auto playback  
mode.  
an OSD language before starting.  
Français  
The language selected will be applied not only  
here but also in other OSD windows, menus  
etc.  
Español  
Previous  
OK  
Next  
[CEC]  
This player supports REGZA-LINK which  
uses the HDMI CEC (Consumer  
Electronics Control) protocol. You can  
1ꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes:  
6. Press OK, enter Resolution setting.  
- If set [Disc Auto Playback]to [Off], aſter you insert  
the disc that contains the upgraded informaꢀon  
toupgradesystem, youhavetostartupgradefrom  
thisopꢀonofSETUPMenu.  
-Iftheupgradefilepackagedidnotpassthe  
verificaꢀon, errorpromptisdisplayed, checkthe  
packageagain(suchasthepackageisnotcomplete)  
-Makesurethefirmwareversionisnotanold  
version.  
Auto  
Choose  
480I/576I  
480P/576P  
720P  
a resolution that fits your TV.  
Change will be applied immediately, you have  
15s to determine whether to save the setting  
or rollback to prior resolution. Better  
performance will be provided by an HDMI  
connection!  
1080I  
1080P  
Previous  
OK Next  
Press /to select an option. Press OK.  
Select "Yes" or "No" using /.  
-WhenyouupgradethesystemusingSDcard, you  
shouldmakeanewfoldernamedUPG_ALL, and  
copytheupgradefileintothisfolder.  
Note:  
-When the player is connected to both VIDEO  
OUTPUT jack and HDMI OUTPUT jack, resoluꢀon is  
set to 720p/1080i/1080p, there will be no video  
output through VIDEO OUTPUT jack.  
•
[Disc Auto Upgrade]  
Turn On or Off the disc automatic upgrade  
switching mode.  
{On} - Start upgrading from the insert  
disc.  
Resolution  
14s  
has been changed!  
Does everything looks all right with this  
resolution? Press Yes if you want to apply it.  
Yes  
No  
Press No to rollback to previous one.  
{Off} - Disable disc auto upgrade mode.  
• [External Memory]  
External Memory would be used in BD  
Live function. When you plug in the SD  
card which has at least 1GB free space to  
play BD-Live function, the BD system  
would make a directory named BUDA  
automatically. Information will display  
the Free size.  
Previous  
OK  
Next  
7. Press OK, enter Aspect ratio setting.  
16:9 Full  
Choose  
an aspect ratio that fits your TV.  
16:9 Normal  
4:3 Pan&Scan  
The change will be applied in the next page.  
Determine whether to save the setting or  
rollback to the previous aspect ratio.  
4:3 Letterbox  
1. Press OK.  
2. Follow the instruction on the TV  
OK  
Next  
Previous  
screen to select {Information}.  
Press /to select an option. Press OK.  
... General Setting ...  
Information  
System  
Setting  
Language  
Playback  
Security  
Network  
wizard is complete!  
Free size is : 0MB  
Now press the OK button to finish and return  
to the Setup Menu.  
Erase  
Move cursor key to select menu option  
then use “OK” key to select  
RETURN Return  
Previous  
OK Finish  
3.Press OK to select "Erase", the data in  
the BUDA folder will be cleared.  
[Language]  
Select the OSD(On-Screen Display), set up  
Menu, Audio, Subtitle default language for  
8. Press OK to return to [General Setting]  
Menu.  
[Upgrade]  
For software upgrades to enhance  
performance, you could select the  
following upgrade method and start to  
upgrade.  
{ Disc }/{SD CARD}  
Upgrade the software from the disc or  
SD card.  
•
the player.  
... General Setting ...  
OSD  
(QJOLVK  
(QJOLVK  
(QJOLVK  
(QJOLVK  
System  
Menu  
Audio  
Subtitle  
Language  
Playback  
Security  
Network  
1. Insert the disc or connect the SD  
card which contains the upgrade file  
package.  
Move cursor key to select menu option  
then use “OK” key to select  
Exit  
SETUP  
2. Follow the instruction on the TV  
screen to confirm upgrade operation.  
- The system will reboot after 5 seconds  
or OK key is pressed.  
• [OSD]  
Select the default on-screen display language.  
1ꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
{On} – Active Last Memory feature.  
{Off} – Disable Last Memory feature.  
Note:  
-Not all the BD discs can support this funcꢀon.  
[PBC]  
VCD2.0 has PBC control (Playback  
Control) menu, which allow you to  
interact with the system via menu.  
{On} – Display playback control menu,  
use NUMBER keys to select desired option.  
{Off} – Hide playback control menu and  
start playback from track1 automatically.  
•
[Menu]  
Select the menu language.  
• [Audio]  
Select the default audio language.  
• [Subtitle]  
•
Select the default subtitle language.  
[Playback]  
... General Setting ...  
Closed Caption  
Angle Mark  
On  
On  
On  
On  
On  
System  
Language  
Playback  
Security  
Network  
PIP Mark  
Secondary Audio...  
Last Memory  
[Security]  
Move cursor key to select menu option  
then use “OK” key to select  
Exit  
SETUP  
... General Setting ...  
Change Password  
Parental Control  
More...  
More...  
System  
• [Closed Caption]  
Language  
Playback  
Security  
Network  
Allow people who are deaf or hearing  
impaired, to have access to television  
programming by displaying the audio  
portion of a televison programme as text  
on the screen.  
More...  
Country Code  
Move cursor key to select menu option  
then use “OK” key to select  
SETUP  
Exit  
{On} – Display the Closed Caption .  
{Off} – Hide the Closed Caption.  
• [Angle Mark]  
Some BDs/DVDs contain the scenes  
recorded with multiple angles, which allow  
you to enjoy the videos with your desired  
angles, therefore the angle mark is  
displayed only when the BD/DVD disc is  
supportable for multi-angle and Angle  
Mark is set to ON.  
•
[Change Password]  
Follow the instruction on the TV set or  
change the password for locked discs  
and play restricted BDs/DVDs.  
... General Setting ...  
ceen Sve  
f
System  
Change Password  
Language  
Playback  
Security  
Network  
Pleaseentercurrentpassword:
{On} – Display the angle mark.  
{Off} – Hide the angle mark.  
Move cursor key to select menu option  
then use “OK” key to select  
RETURN Return  
• [PIP Mark]  
1. Use NUMBER keys to enter four digit  
old password. The default password  
is "0000".  
The Picture -In- Picture (PIP) mode display  
two pictures on the TV screen at the same  
time, the full screen picture is called Main  
Window and the small inset window is  
called Sub Window. The PIP mark is  
displayed when in PIP mode and PIP Mark  
is set to ON.  
2. Enter the new password  
... General Setting ...  
ceen Sve  
f
System  
Change Password  
Language  
Playback  
Security  
Network  
Newpassword:
Confirm password :  
{On} – Display the PIP mark.  
{Off} – Hide the PIP mark.  
Note:  
Move cursor key to select menu option  
then use “OK” key to select  
RETURN Return  
3. Enter the new password again to confirm.  
[Parental Control]  
Restricts access to discs that are  
unsuitable for children. These discs  
must be recorded with rating.  
1. Press OK.  
-High Definiꢀon PIP (Second Video) is not supported.  
• [Secondary Audio Mark]  
{On} – Display Secondary Audio Mark.  
{Off} – Hide the Secondary Audio Mark.  
• [Last Memory]  
If you open the disc tray or switch this BD  
player to standby state during normal  
playback, the BD Player can memorize the  
end playing point, the BD player will start  
playback from the memorized point next  
time.  
•
2. Use NUMBER keys to enter the  
password  
1ꢄ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
then press .  
... General Setting ...  
Screen Sve  
Of
3. Select [IP Setting] in the menu, then  
press OK to select [Auto]. An IP  
address is obtained automatically.  
If no IP address is obtained, select  
[Manual] to input IP Address, Subnet  
Mask, Default Gateway, DNS and  
press OK to re-connect again to the  
network. It will try to obtain the IP  
address again.  
4. Press RETURN or press OK to exit.  
Notes:  
-Acontractwiththeproviderisneededtoconnectto  
theInternet.  
System  
Parental Control  
Language  
Playback  
Security  
Network  
Enter password:  
Move cursor key to select menu option  
then use “OK” key to select  
Return  
RETURN  
3. Select a rating level, then press OK.  
... General Setting ...  
Screen Save  
Off  
System  
Parental Control  
Language  
Playback  
Security  
Network  
Select level:  
Off  
[1] KID SAFE  
[2] G  
Return  
RETURN  
-Thisplayerdoesnotsupportautomaꢀcdetecꢀonof  
cross-cables. Usethestraight(standard)LANcable.  
-LoadingBD-Livecontentfromtheinternetmaytake  
someꢀme, dependingonthefilesizeandthespeed  
oftheinternetconnecꢀon.  
Off  
Items  
Description  
KID SAFE Safe for kids  
G
All children and general guidance  
Parental guidance  
•
[Internet Connection]  
PG  
{Enable} – Enable connection to internet.  
{Disable} – Disable connection to  
internet.  
[Information]  
Display all Network Informaion.  
[Connection Test]  
Display Network connection status  
information.  
[IP Setting]  
{Auto} – Auto obtain network information.  
{Manual} – Manual setup network  
information.  
PG-13  
PGR  
R
Parental guidance for children under 13  
Parental guidance Recommended  
Restricted viewing  
•
•
NC-17  
ADULT  
Notes:  
No one 17 and under allowed  
Adult only  
- Rated discs above the level you set in  
[Parental Control] require a password to be  
entered.  
- The raꢀngs are country-depended. To allow  
all discs to play, select 'Off'.  
•
•
[BD-Live Connection]  
• [Country Code]  
{Permitted} – During playback of BD-  
Live disc, the disc may automatically  
download all information from appointed  
network.  
{Partial Permitted} – During  
playback of BD-Live disc, the disc may  
automatically download partial of the  
information from appointed network.  
{Prohibited} – Disable downloading  
information from network.  
This ensures that you will be able to see  
the scenes intended for your current  
residential Country/Area.  
Use NUMBER Keys to enter your password,  
then you can choose your Country/Area.  
[Network]  
... General Setting ...  
Internet Connection  
Information  
Enable  
System  
Language  
Playback  
Security  
Network  
Connection Test  
IP Setting  
BD-Live Connection  
Premitted  
Move cursor key to select menu option  
then use “OK” key to select  
SETUP Exit  
To enjoy BD-Live bonus contents, set up  
the network connection.  
Note:  
- Ensure that the network cable is properly  
connected and the router is switched on.  
1. Connect the BD player to the  
broadband modem or router.  
2. In the Setup menu, select [Network],  
1ꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note:  
Display Setting  
-When resoluꢀon is set to 720p/1080i/1080p:  
(1) If only CVBS connected, the resoluꢀon of CVBS  
video output will be set to 480i/576i automaꢀcally.  
(2) If HDMI and CVBS are both connected, there will  
be no CVBS video output, instead, a message will be  
shown as follows:  
1. Press SETUP  
[General Setting] menu is displayed.  
2. Press to select [Display Setting],  
then press .  
3. Select an option, press to access.  
Out Of Range:Check Display Resoluꢀon  
... Display Setting...  
•
[Color Space]  
TV Screen  
Resolution  
16:9 Normal  
480I/576I  
TV  
Select a predefined Color space of  
picture.  
{RGB} – select RGB Color space.  
{YCbCr} – select YCbCr Color space.  
{YCbCr422} – Select YCbCr422 Color  
space.  
Video Process  
Motion Vide...  
Color Space  
YCbCr422  
HDMI Deep Color  
HDMI 1080P 24F  
Off  
On  
Move cursor key to select menu option  
then use “OK” key to select  
Exit  
SETUP  
4. Press /to select a setup option and  
press   
5. Select the setting you wish to change  
and press OK to confirm.  
- Press to return to the previous  
menu.  
{Full RGB} – select Full RGB Color  
space.  
[HDMI Deep Color]  
•
This feature is available only when the  
display device is connected by a HDMI  
cable, and when it supports deep Color  
feature.  
{30 bits} – Output 30 bits Color.  
{36 bits} – Output 36 bits Color.  
{Off} – Output standard 24 bit Color.  
Note:  
- Press SETUP to exit the menu.  
[TV]  
•
[TV Screen]  
Select the screen format according to  
how you want the picture to appear on  
the TV.  
{16:9 Full} – for a disc with the aspect  
ratio of 4:3, the output video is stretched  
into 16:9 full screen.  
{16:9 Normal} – for a disc with the  
aspect ratio of 4:3, the output video is  
resized vertically to match what will be  
seen on the display.  
{4:3 Pan&Scan} – for standard TV,  
Display a wide picture on the entire  
screen and cuts off the redundant  
portions.  
-When the color space is "YCbCr422", even if HDMI  
DeepColorissetto30bits/36bits,itisnotoutputwith  
Deep Color.  
•
[HDMI 1080p 24F]  
{On}–Enable1080p24Fvideoresolution  
setting.  
{Off} – Disable 1080p 24F video  
resolution setting.  
About HDMI 1080p 24F Notes:  
If you want the 24Hz output, it should fulfill below 3  
conditions:  
1.TV supports the 24Hz display:  
2.Player choose the 24Hz option in the setup menu;  
{4:3 Letterbox} – for standard TV,  
Display a wide picture with two black  
borders on the top and bottom of 4:3  
screen.  
3N.oMteedsi:a must be the 24Hz video.  
- This resoluꢀon becomes effecꢀve only when the  
playing BD-Disc contents are Film source.  
- During HDMI 1080p 24F playback, there will be no  
composite output.  
•
[Resolution]  
Select a video output resolution that is  
compatible with your TV display  
capability.  
{Auto} – Select the most suitable  
resolution according to the TV .  
{480I/576I}, {480P/576P}, {720P},  
{1080I}, {1080P}  
[Video Process]  
... Display Setting...  
Video Adjust  
Sharpness  
More...  
Low  
TV  
Video Process  
Motion Video...  
– Select a video resolution setting that is  
best supported by the TV. See TV manual  
for details.  
Move cursor key to select menu option  
then use “OK” key to select  
SETUP Exit  
1ꢆ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
•
[Video Adjust]  
Select a predefined setting of the video.  
1. Press OK .  
Audio Setting  
1. Press SETUP  
2. Press/to adjust the video  
Brightness, Contrast, Hue and Saturaꢀon.  
{Brightness}- press /to adjust  
the brightness of display, goes left  
means dark and right means bright.  
{Contrast}- press /to adjust the  
contrast of display, goes left means  
low contrast and right means high  
contrast.  
[General Setting] menu is displayed.  
2. Press to select [Audio Setting],  
then press .  
3. Select an option, press to access.  
... Audio Setting...  
PCM  
Audio Output  
Spdif  
HDMI  
PCM  
48K  
Off  
Down_samp  
DRC  
{Hue}- press /to adjust the Hue  
of display, goes left means low hue  
and right means high hue.  
{Saturation}- press /to adjust  
the saturation of display, goes left  
means low Saturation and right means  
high saturation.  
Move cursor key to select menu option  
then use “OK” key to select  
Exit  
SETUP  
4. Press /to select a setup option and  
press   
5. Select the setting you wish to change  
and press OK to confirm.  
- Press to return to the previous  
menu.  
- Press SETUP to exit the menu.  
[Audio Output]  
[Spdif]  
3. Press RETURN to exit.  
Brightness  
Contrast  
Hue  
•
Select the output mode of COAXIAL  
jack, options include Bitstream, PCM,  
Re-encode and Off.  
Saturation  
Change  
Exit  
RETURN  
{Bitstream} – Output digital signal  
without any processing.  
{PCM} – Output digital signal with  
processing, only two channels export.  
{Re-encode} – Auto select signal type  
from COAXIAL jack according to the  
Audio stream on disc.  
{Off} – No output for S/PDIF.  
[HDMI]  
Select the output mode of HDMI Out  
jack, options include Bitstream, PCM,  
Re-encode and Off.  
{Bitstream} – Output HDMI digital  
signal without any processing.  
{PCM} – Output HDMI digital signal  
with processing, only two channels  
export.  
•
[Sharpness]  
Select the level of sharpness: High,  
Medium, Low  
{High} - Select High sharpness level  
{Medium} - Select Medium sharpness  
level  
{Low} - Select Low sharpness level  
•
[Motion Video Process]  
... Display Setting...  
Video Mode  
TV  
Video Process  
Motion Video...  
Move cursor key to select menu option  
then use “OK” key to select  
Exit  
SETUP  
{Re-encode} – Auto select signal type  
from HDMI Out jack according to the  
Audio stream on disc.  
{Off} – No output for HDMI.  
[Down_samp]  
Select the digital audio signal sampling  
frequency.  
{48K} – For discs recorded at sampling  
rate of 48 kHz.  
•
[Video Mode]  
Select the output mode of video,options  
include: Standard, Vivid, Smooth, these  
can change the output display.  
{Standard} output video signal without  
any processing and in standard mode.  
{Vivid} output video signal in vibrant color  
mode.  
•
{Smooth} output video signal in smooth  
mode.  
{96K} – For discs recorded at sampling  
rate of 96 kHz.  
1ꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
{192K} – For discs recorded at sampling  
rate of 192 kHz.  
[DRC]  
•
Select the Dynamic Range Control mode  
which makes it available to listen to a  
movie at a low volume without losing  
sound clarity.  
{Off} – Non-dynamic range compress.  
{On} – Dynamic range compress.  
{Auto} – Adjust the DRC according to  
input audio.  
The setting of Auto is effective for Dolby  
TrueHD.  
System Information  
1. Press SETUP  
[General Setting] menu is displayed.  
2. Press to select [System  
Information],  
- The current software version and MAC  
address display  
- Press to return to the previous  
menu.  
- Press SETUP to exit the menu.  
... System Information ...  
Software version: V XX  
MAC: E8-9D-87-XX-XX-XX  
Move cursor key to select menu option  
then use “OK” key to select  
Exit  
SETUP  
ꢀ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 Specification  
Playable media  
JPEG  
This product can play:  
• BD-Video, BD-R/RE2.0, BDAV  
• DVD, DVD-Video, DVD+R/+RW,  
DVD-R/-RW, DVD+R/-R DL (Dual Layer)  
• Video CD/SVCD  
• Audio CD, CD-R/CD-RW  
• AVCHD, AVCREC disc  
• SD card  
• Supported file extension: '.jpg' or ‘. jpeg'  
• JPEG/ISO format  
• Does not support Picture CD  
Main Unit  
• Power supply rating:  
120V 60Hz  
• Power consumption: 20W  
• Power consumption in standby mode:  
<1W  
• Dimensions (w x h x d):  
360 x 54 x 232 (mm)  
Video  
Signal system:NTSC  
Composite video output: 1Vp-p (75  
ohm).  
• Net Weight: 1.7 kg  
• Operating temperature:5°C to 35°C  
• Operating humidity:Less than 80 % (no  
condensation)  
HDMI Output: 480i/576i,480p/  
576p,720p,1080i,1080p,1080P/24F.  
Audio  
• 2 Channel analog output  
- Audio L&R : 2 Vrms (> 1 kohm)  
Signal-to-noise Ratio ≥ 95 dB  
THD+N 1kHz ≤ -85 dB  
Dynamic Range 1kHz ≥85 dB  
Crosstalk 1kHz ≤ -95dB  
• Digital output (Coaxial):  
0.5 Vp-p (75 ohm)  
Accessories supplied  
• Remote control and Size 'R03' carbon  
zinc batteries (Two)  
• Owner's manual  
• HDMI output  
LAN  
• LAN terminal 10BASE-T/100BASE-TX  
SD  
• SD, SDHC  
• mini-SD, mini-SDHC, micro-SD,  
micro-SDHC (adapter is necessary)  
• Maximum size: 32GB  
• Supported file systems: FAT16/32  
• Type of files supported: MP3/JPEG/MPEG4  
• Maximum No. of folders supported: 1000  
MP3 tracks  
• Supported file extension: '.mp3'  
• Supported audio codec : MP3  
• ISO format  
•
Supported corresponding bitrate:8kbps-320  
kbps  
•
Supported sampling frequencies :  
32kHz,44.1kHz, 48kHz  
ꢀ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8 Troubleshooting  
If you experience any of the following difficulties while using this unit, check the list below  
before consulting your nearest TOSHIBA dealer.  
Problem  
Tip  
No reaction to the  
remote control.  
Connect the product to the power outlet.  
Point the remote control at the product.  
Insert the batteries correctly.  
Insert new batteries in the remote control.  
Turn on the TV.  
No video signal on the  
display device.  
Set the TV to the correct external input.  
Select the correct video resolution.  
Set TV System of TV correctly.  
No video output through Set Resolution of HDMI to 480i/576i or 480p/576p.  
VIDEO OUTPUT jack.  
No audio / video signal  
If the unit is connected to the unauthorized display device with  
on the display device via an HDMI cable, the audio/video signal may not be output.  
HDMI cable.  
No high-definition video  
signal on the TV.  
Does the disc contain high-definition video? High-definition  
video is not available when the disc does not contain it.  
Does the TV support high-definition video? High-definition video  
is not available when the TV does not support it.  
No audio signal from the Assign the audio input of the TV to the corresponding video  
loudspeakers of the TV. input.  
No audio signal from the Turn on the audio system.  
loudspeakers of the  
Set the audio system to the correct external input.  
audio system.  
Increase the volume level of the audio system.  
ꢀꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cannot play back a disc. Make sure that the BD Player supports the disc.  
Make sure that the Blu-ray Disc player supports the region code  
of the DVD or BD.  
For DVD+RW/+R or DVD-RW/-R, make sure that the disc is  
finalized.  
Clean the disc.  
Cannot play back JPEG  
files from a disc.  
Make sure that the disc was recorded in the UDF, ISO9660 or  
JOLIET format.  
Cannot play MP3 files  
from a disc.  
Make sure that the disc was recorded in the UDF, ISO9660 or  
JOLIET format.  
Make sure that the bit rate of the MP3 files is between 8 and  
320 kbps.  
Make sure that the sample rate of the MP3 files is 32kHz,  
44.1kHz or 48kHz.  
Cannot find a JPEG file.  
Cannot find a MP3 file.  
Cannot upgrade SW  
Make sure that the selected group (folder) does not contain  
more than 9,999 files for DVD, and 999 files for CD.  
Make sure that the file extension is .jpg, .JPG, .jpeg or .JPEG.  
Make sure that the selected folder does not contain more than  
9,999 files for DVD, and 999 files for CD.  
Make sure that the file extension is .mp3 or .MP3.  
When you upgrade the system with SD card, you should make a  
new folder named UPG_ALL, and copy the upgrade file into this  
folder.  
Sometimes the options  
of setup menu cannot  
be selected.  
When playing a DVD disc or BD disc, press STOP button  
once, the player will go into stop resume mode, meanwhile  
you cannot change some settings in setup menu such as  
language subitem menu, audio, subtitle etc.  
If you want to change that, press STOP button twice, the  
player will go into full stop mode, then you can do it.  
ꢀꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DTS®  
9 Glossary  
DTS is a multi-channel surround sound  
system. By connecting to DTS decoder,  
you can enjoy movie dynamic and realistic  
sound like movie theater. DTS surround  
sound technologies were developed by  
DTS, Inc.  
Aspect ratio  
Aspect ratio refers to the length to height  
ratio of TV screens. The ratio of a standard  
TV is 4:3, while the ratio of a high-  
definition or wide TV is 16:9. The letter  
box allows you to enjoy a picture with a  
wider perspective on a standard 4:3  
screen.  
DTS-HD®  
DTS-HD is a lossless coding technology  
developed as an extension of the original  
DTS Coherent Acoustics format.  
Blu-ray Disc supports 7.1 multi-channel  
surround sound output.  
Blu-ray Disc (BD)  
Blu-ray Disc is a next generation optical  
video disc capable of storing five times  
more data than a conventional DVD. The  
large capacity makes it possible to benefit  
from the features such as high-definition  
videos, multichannel surround sound,  
interactive menus and so on.  
DTS-HD Master AudioTM  
A disc encoded with DTS-HD Master Audio  
delivers ALL of the information from the  
original master recording — bit-for-bit, it's  
identical to what the sound engineers laid  
down. Audio doesn't get any better than  
this.  
BONUSVIEWTM  
This is a BD-Video (Final Standard Profile  
or Profile 1.1) that supports interactive  
content encoded on the disc, such as  
picture-in-picture. This means you can play  
the primary video and secondary video  
simultaneously.  
HDCP  
High-bandwidth Digital Content Protection.  
This is a specification that provides a  
secure transmission of digital contents  
between different devices (to prevent  
unauthorized copyright.)  
Digital Audio  
Digital Audio is a sound signal that has  
been converted into numerical values.  
Digital sound can be transmitted through  
multiple channels. Analogue sound can  
only be transmitted through two channels.  
HDMI®  
High-Definition Multimedia Interface  
(HDMI) is a high-speed digital interface  
that can transmit uncompressed high  
definition video and digital multichannel  
audio. It delivers high quality picture and  
sound quality. HDMI is fully backward-  
compatible with DVI. As required by the  
HDMI standard, connecting to HDMI or  
DVI products without HDCP (High-  
bandwidth Digital Content Protection) will  
result in no Video or Audio output.  
Dolby® Digital  
The system to compress digital sound  
developed by Dolby Laboratories. It offers  
you sound of stereo (2ch) or multichannel  
audio.  
Dolby® Digital Plus  
Dolby Digital Plus is the next generation  
digital audio compression technology  
developed as an extension to Dolby Digital.  
Blu-ray Disc supports 7.1 multi-channel  
surround sound output.  
JPEG  
Dolby® TrueHD  
A very common digital still picture format.  
A still-picture data compression system  
proposed by the Joint Photographic Expert  
Group, which features small decrease in  
image quality in spite of its high  
Dolby TrueHD is a lossless coding  
technology developed for next generation  
optical discs. Blu-ray Disc supports 7.1  
multi-channel surround sound output.  
ꢀꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
compression ratio. Files are recognized by  
their file extension ‘.jpg’ or ‘.jpeg.’  
LAN (Local Area Network)  
A group of linked devices in a company,  
school or home. Indicates the boundaries  
of a particular network.  
Local storage  
This storage area is used as destination for  
storing additional contents from BD-Live  
enabled BD-Video.  
MP3  
A file format with a sound data  
compression system. MP3 is the  
abbreviation of Motion Picture Experts  
Group 1 (or MPEG-1) Audio Layer 3. With  
the MP3 format, one CD-R or CD-RW can  
contain about 10 times more data than a  
regular CD.  
PBC  
Playback Control. A system where you  
navigate through a Video CD/Super VCD  
with on-screen menus that are recorded  
onto the disc. You can enjoy interactive  
playback and search.  
PCM  
Pulse Code Modulation. A digital audio  
encoding system.  
Region code  
A system that allows discs to be played  
only in the region designated. This unit  
only plays discs that have compatible  
region codes. You can find the region code  
of your unit on the product label. Some  
discs are compatible with more than one  
region (or ALL regions.)  
ꢀꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
License Information on the Software Used in This Product  
This document is statement purpose only. Not concerned with operation of this product.  
The software pre-installed in this product consists of multiple, independent software components.  
Each software component is copyrighted by a third party. This product uses software components  
that are distributed as freeware under a third-party end-user license agreement or copyright notice  
(hereinafter referred to as a “EULA”).  
Some EULAs require that the source code of the applicable component be disclosed as the condi-  
tion for distributing the software component in executable format. You can check the software  
components subject to such EULA requirements on the following phone number:  
Phone number: 1-800-268-3404  
TOSHIBA provides a warranty for this product you have purchased under conditions set forth by  
TOSHIBA. However, some of the software components distributed under an EULA are made avail-  
able for use by the user on the assumption that they are not copyrighted or warranted by a third  
party. These software components are licensed to the user free of charge and therefore not cov-  
ered by any warranty within the scope of the applicable laws. These software components are not  
subject to any copyrights or other third-party rights and are provided in “as is” condition without  
any warranty, whether express or implied. “Warranty” here includes, but not limited to, an implied  
warranty for marketability or fitness for specific uses. All risks associated with the quality or  
performance of these software components are assumed by the user. TOSHIBA shall not be liable  
whatsoever for any cost of repair or correction or other incidental expense incurred in connection  
with a defect found in any of these software components. Unless specified under the applicable  
laws or in a written agreement, a party who changes or redistributes the software with consent  
from the copyright holders or based on the aforementioned licenses shall not be held liable what-  
soever for any loss arising from the use of or inability to use such software components. The  
same applies even when the copyright holders or relevant third parties have been informed of the  
possibility of such loss. “Loss” here includes normal, special, incidental and indirect loss (includ-  
ing, but not limited to, the loss of data or its accuracy; loss incurred by the user or any third  
party; and interface incompatibility with other software). Please read each EULA for details on the  
use conditions and items that must be observed regarding these software components.  
The table below lists the software components pre-installed in this product, which are subject  
to EULAs. The user should read the applicable EULAs carefully before using these software  
components. The EULAs are exhibited in their original text (English) as exactly written by the  
respective parties.  
Project license  
Project name  
Linux kernel  
GPLv2  
Busybox  
GPLv2  
U-boot  
GPLv2  
glibc  
LGPLv2.1  
SquashFS  
GPLv2  
International Components for Unicode  
ICU License  
OpenSSL  
OpenSSL License and SSLeay License  
zlib license  
zlib  
FreeType  
FreeType License  
Expat license  
Expat  
CURL  
curl license  
Independent JPEG group  
LIRC  
IJG license  
GPLvꢀ  
ꢀꢄ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GNU GENERAL PUBLIC LICENSE  
Version 2, June 1991  
Copyright (C) 1989, 1991 Free Software  
Foundation, Inc.,  
51 Franklin Street, Fifth Floor, Boston, MA  
02110-1301 USA  
Everyone is permitted to copy and distribute  
verbatim copies  
Also, for each author's protection and ours,  
we want to make certain that everyone under-  
stands that there is no warranty for this free  
software. If the software is modified by some-  
one else and passed on, we want its recipients  
to know that what they have is not the original,  
so that any problems introduced by others will  
not reflect on the original authors' reputations.  
of this license document, but changing it is  
not allowed.  
Finally, any free program is threatened con-  
stantly by software patents. We wish to avoid  
the danger that redistributors of a free program  
will individually obtain patent licenses, in effect  
making the program proprietary. To prevent  
this, we have made it clear that any patent  
must be licensed for everyone's free use or not  
licensed at all.  
Preamble  
The licenses for most software are designed to  
take away your freedom to share and change  
it. By contrast, the GNU General Public Li-  
cense is intended to guarantee your freedom  
to share and change free software--to make  
sure the software is free for all its users. This  
General Public License applies to most of the  
Free Software Foundation's software and to any  
other program whose authors commit to us-  
ing it. (Some other Free Software Foundation  
software is covered by the GNU Lesser General  
Public License instead.) You can apply it to your  
programs, too.  
The precise terms and conditions for copying,  
distribution and modification follow.  
GNU GENERAL PUBLIC LICENSE  
TERMS AND CONDITIONS FOR COPYING,  
DISTRIBUTION AND MODIFICATION  
0. This License applies to any program or oth-  
er work which contains a notice placed by the  
copyright holder saying it may be distributed  
under the terms of this General Public License.  
The "Program", below, refers to any such pro-  
gram or work, and a "work based on the Pro-  
gram" means either the Program or any deriva-  
tive work under copyright law: that is to say, a  
work containing the Program or a portion of it,  
either verbatim or with modifications and/or  
translated into another language. (Hereinaf-  
ter, translation is included without limitation in  
the term "modification".) Each licensee is ad-  
dressed as "you".  
When we speak of free software, we are refer-  
ring to freedom, not price. Our General Public  
Licenses are designed to make sure that you  
have the freedom to distribute copies of free  
software (and charge for this service if you  
wish), that you receive source code or can get it  
if you want it, that you can change the software  
or use pieces of it in new free programs; and  
that you know you can do these things.  
To protect your rights, we need to make re-  
strictions that forbid anyone to deny you these  
rights or to ask you to surrender the rights.  
These restrictions translate to certain respon-  
sibilities for you if you distribute copies of the  
software, or if you modify it.  
Activities other than copying, distribution and  
modification are not covered by this License;  
they are outside its scope. The act of running  
the Program is not restricted, and the output  
from the Program is covered only if its con-  
tents constitute a work based on the Program  
(independent of having been made by running  
the Program). Whether that is true depends on  
what the Program does.  
For example, if you distribute copies of such a  
program, whether gratis or for a fee, you must  
give the recipients all the rights that you have.  
You must make sure that they, too, receive or  
can get the source code. And you must show  
them these terms so they know their rights.  
We protect your rights with two steps: (1)  
copyright the software, and (2) offer you this li-  
cense which gives you legal permission to copy,  
distribute and/or modify the software.  
1. You may copy and distribute verbatim cop-  
ies of the Program's source code as you receive  
it, in any medium, provided that you conspicu-  
ously and appropriately publish on each copy  
ꢀꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
an appropriate copyright notice and disclaimer  
of warranty; keep intact all the notices that re-  
fer to this License and to the absence of any  
warranty;and give any other recipients of the  
Program a copy of this License along with the  
Program.  
ute the same sections as part of a whole which  
is a work based on the Program, the distribu-  
tion of the whole must be on the terms of this  
License, whose permissions for other licensees  
extend to the entire whole, and thus to each  
and every part regardless of who wrote it.  
You may charge a fee for the physical act of  
transferring a copy, and you may at your op-  
tion offer warranty protection in exchange for  
a fee.  
Thus, it is not the intent of this section to claim  
rights or contest your rights to work written en-  
tirely by you; rather, the intent is to exercise the  
right to control the distribution of derivative or  
collective works based on the Program.  
2. You may modify your copy or copies of  
the Program or any portion of it, thus forming  
a work based on the Program, and copy and  
distribute such modifications or work under the  
terms of Section 1 above, provided that you  
also meet all of these conditions:  
In addition, mere aggregation of another work  
not based on the Program with the Program (or  
with a work based on the Program) on a volume  
of a storage or distribution medium does not  
bring the other work under the scope of this  
License.  
a) You must cause the modified files to carry  
prominent notices stating that you changed the  
files and the date of any change.  
3. You may copy and distribute the Program  
(or a work based on it, under Section 2) in ob-  
ject code or executable form under the terms of  
Sections 1 and 2 above provided that you also  
do one of the following:  
b) You must cause any work that you dis-  
tribute or publish, that in whole or in part con-  
tains or is derived from the Program or any  
part thereof, to be licensed as a whole at no  
charge to all third parties under the terms of  
this License.  
a) Accompany it with the complete corre-  
sponding machine-readable source code, which  
must be distributed under the terms of Sections  
1 and 2 above on a medium customarily used  
for software interchange; or,  
c) If the modified program normally reads  
commands interactively when run, you must  
cause it, when started running for such inter-  
active use in the most ordinary way, to print  
or display an announcement including an ap-  
propriate copyright notice and a notice that  
there is no warranty (or else, saying that you  
provide  
a warranty) and that users may redistribute the  
program under these conditions, and telling  
the user how to view a copy of this License.  
(Exception: if the Program itself is interactive  
but does not normally print such an announce-  
ment, your work based on the Program is not  
required to print an announcement.)  
b) Accompany it with a written offer, valid  
for at least three years, to give any third party,  
for a charge no more than your cost of physi-  
cally performing source distribution, a complete  
machine-readable copy of the corresponding  
source code, to be distributed under the terms  
of Sections 1 and 2 above on a medium custom-  
arily used for software interchange; or,  
c) Accompany it with the information you re-  
ceived as to the offer to distribute correspond-  
ing source code. (This alternative is allowed  
only for noncommercial distribution and only if  
you received the program in object code or ex-  
ecutable form with such an offer, in accord with  
Subsection b above.)  
These requirements apply to the modified work  
as a whole.  
If identifiable sections of that work are not de-  
rived from the Program, and can be reasonably  
considered independent and separate works in  
themselves, then this License, and its terms, do  
not apply to those sections when you distribute  
them as separate works. But when you distrib-  
The source code for a work means the preferred  
form of the work for making modifications to  
it. For an executable work, complete source  
code means all the source code for all modules  
it contains, plus any associated interface defini-  
ꢀꢆ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
tion files, plus the scripts used to control compi-  
lation and installation of the executable. How-  
ever, as a special exception, the source code  
distributed need not include anything that is  
normally distributed (in either source or binary  
form) with the major components (compiler,  
kernel, and so on) of the operating system on  
which the executable runs, unless that compo-  
nent itself accompanies the executable.  
conditions are imposed on you (whether by  
court order, agreement or otherwise) that con-  
tradict the conditions of this License, they do  
not excuse you from the conditions of this Li-  
cense. If you cannot distribute so as to satisfy  
simultaneously your obligations under this  
License and any other pertinent obligations,  
then as a consequence you may not distribute  
the Program at all. For example, if a patent  
license would not permit royalty-free redistribu-  
tion of the Program by all those who receive  
copies directly or indirectly through you, then  
the only way you could satisfy both it and this  
License would be to refrain entirely from distri-  
bution of the Program.  
If distribution of executable or object code is  
made by offering access to copy from a des-  
ignated place, then offering equivalent access  
to copy the source code from the same place  
counts as distribution of the source code, even  
though third parties are not compelled to copy  
the source along with the object code.  
If any portion of this section is held invalid or  
unenforceable under any particular circum-  
stance, the balance of the section is intended to  
apply and the section as a whole is intended to  
apply in other circumstances.  
4. You may not copy, modify, sublicense, or  
distribute the Program except as expressly pro-  
vided under this License. Any attempt other-  
wise to copy, modify, sublicense or distribute  
the Program is void, and will automatically ter-  
minate your rights under this License.  
However, parties who have received copies,  
or rights, from you under this License will not  
have their licenses terminated so long as such  
parties remain in full compliance.  
It is not the purpose of this section to induce  
you to infringe any patents or other property  
right claims or to contest validity of any such  
claims; this section has the sole purpose of pro-  
tecting the integrity of the free software distri-  
bution system, which is implemented by public  
license practices. Many people have made  
generous contributions to the wide range of  
software distributed through that system in reli-  
ance on consistent application of that system;  
it is up to the author/donor to decide if he or  
she is willing to distribute software through any  
other system and a licensee cannot impose that  
choice.  
5. You are not required to accept this License,  
since you have not signed it. However, nothing  
else grants you permission to modify or distrib-  
ute the Program or its derivative works. These  
actions are prohibited by law if you do not ac-  
cept this License. Therefore, by modifying or  
distributing the Program (or any work based on  
the Program), you indicate your acceptance of  
this License to do so, and all its terms and con-  
ditions for copying, distributing or modifying  
the Program or works based on it.  
This section is intended to make thoroughly  
clear what is believed to be a consequence of  
the rest of this License.  
6. Each time you redistribute the Program (or  
any work based on the Program), the recipient  
automatically receives a license from the origi-  
nal licensor to copy, distribute or modify the  
Program subject to these terms and conditions.  
You may not impose any further restrictions on  
the recipients' exercise of the rights granted  
herein. You are not responsible for enforcing  
compliance by third parties to this License.  
8. If the distribution and/or use of the Program  
is restricted in certain countries either by pat-  
ents or by copyrighted interfaces, the original  
copyright holder who places the Program under  
this License may add an explicit geographical  
distribution limitation excluding those coun-  
tries, so that distribution is permitted only in  
or among countries not thus excluded. In such  
case, this License incorporates the limitation as  
if written in the body of this License.  
7. If, as a consequence of a court judgment  
or allegation of patent infringement or for any  
other reason (not limited to patent issues),  
9. The Free Software Foundation may publish  
revised and/or new versions  
ꢀꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
of the General Public License from time to time.  
Such new versions will be similar in spirit to the  
present version, but may differ in detail to ad-  
dress new problems or concerns.  
INCLUDING ANY GENERAL, SPECIAL, INCIDEN-  
TAL OR CONSEQUENTIAL DAMAGES ARISING  
OUT OF THE USE OR INABILITY TO USE THE  
PROGRAM (INCLUDING BUT NOT LIMITED  
TO LOSS OF DATA OR DATA BEING RENDERED  
INACCURATE OR LOSSES SUSTAINED BY  
YOU OR THIRD PARTIES OR A FAILURE OF THE  
PROGRAM TO OPERATE WITH ANY OTHER  
PROGRAMS), EVEN IF SUCH HOLDER OR OTH-  
ER PARTY HAS BEEN ADVISED OF THE  
Each version is given a distinguishing version  
number. If the Program specifies a version  
number of this License which applies to it and  
"any later version", you have the option of fol-  
lowing the terms and conditions either of that  
version or of any later version published by the  
Free Software Foundation. If the Program does  
not specify a version number of this License,  
you may choose any version ever published by  
the Free Software Foundation.  
POSSIBILITY OF SUCH DAMAGES.  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Pro-  
grams  
10. If you wish to incorporate parts of the  
Program into other free programs whose distri-  
bution conditions are different, write to the au-  
thor to ask for permission. For software which  
is copyrighted by the Free Software Founda-  
tion, write to the Free Software Foundation;  
we sometimes make exceptions for this. Our  
decision will be guided by the two goals of pre-  
serving the free status of all derivatives of our  
free software and of promoting the sharing and  
reuse of software generally.  
If you develop a new program, and you want  
it to be of the greatest possible use to the pub-  
lic, the best way to achieve this is to make it  
free software which everyone can redistribute  
and change under these terms.  
To do so, attach the following notices to the  
program. It is safest to attach them to the start  
of each source file to most effectively convey  
the exclusion of warranty; and each file should  
have at least the "copyright" line and a pointer  
to where the full notice is found.  
NO WARRANTY  
11. BECAUSE THE PROGRAM IS LICENSED  
FREE OF CHARGE, THERE IS NO WARRANTY  
FOR THE PROGRAM, TO THE EXTENT PERMIT-  
TED BY APPLICABLE LAW. EXCEPT WHEN  
OTHERWISE STATED IN WRITING THE COPY-  
RIGHT HOLDERS AND/OR OTHER PARTIES  
PROVIDE THE PROGRAM "AS IS" WITH-  
OUT WARRANTY OF ANY KIND, EITHER EX-  
PRESSED OR IMPLIED, INCLUDING, BUT NOT  
LIMITED TO, THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PAR-  
TICULAR PURPOSE. THE ENTIRE RISK AS  
TO THE QUALITY AND PERFORMANCE OF THE  
PROGRAM IS WITH YOU. SHOULD THE  
PROGRAM PROVE DEFECTIVE, YOU ASSUME  
THE COST OF ALL NECESSARY SERVICING,  
REPAIR OR CORRECTION.  
<one line to give the program's name and a  
brief idea of what it does.>  
Copyright (C) <year> <name of author>  
This program is free software; you can re-  
distribute it and/or modify it under the terms  
of the GNU General Public License as published  
by the Free Software Foundation; either ver-  
sion 2 of the License, or (at your option) any  
later version.  
This program is distributed in the hope that it  
will be useful, but WITHOUT ANY WARRANTY;  
without even the implied warranty of MER-  
CHANTABILITY or FITNESS FOR A PARTICULAR  
PURPOSE. See the GNU General Public License  
for more details.  
12. IN NO EVENT UNLESS REQUIRED BY AP-  
PLICABLE LAW OR AGREED TO IN WRITING  
WILL ANY COPYRIGHT HOLDER, OR ANY OTH-  
ER PARTY WHO MAY MODIFY AND/OR  
REDISTRIBUTE THE PROGRAM AS PERMITTED  
ABOVE, BE LIABLE TO YOU FOR DAMAGES,  
You should have received a copy of the GNU  
General Public License along with this program;  
if not, write to the Free Software Foundation,  
Inc.,51 Franklin Street, Fifth Floor, Boston, MA  
02110-1301 USA.  
ꢁ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Also add information on how to contact you by  
electronic and paper mail.  
Everyone is permitted to copy and distribute  
verbatim copies of this license document, but  
changing it is not allowed.  
If the program is interactive, make it output a  
short notice like this when it starts in an inter-  
active mode:  
[This is the first released version of the Lesser  
GPL. It also counts as the successor of the GNU  
Library Public License, version 2, hence the ver-  
sion number 2.1.]  
Gnomovision version 69, Copyright (C) year  
name of author  
Gnomovision comes with ABSOLUTELY NO  
WARRANTY; for details type `show w'.  
This is free software, and you are welcome  
to redistribute it under certain conditions; type  
`show c' for details.  
Preamble  
The licenses for most software are designed to  
take away your freedom to share and change it.  
By contrast, the GNU General Public  
Licenses are intended to guarantee your free-  
dom to share and change  
The hypothetical commands `show w' and  
`show c' should show the appropriate  
parts of the General Public License. Of course,  
the commands you use may  
be called something other than `show w' and  
`show c'; they could even be  
free software--to make sure the software is free  
for all its users.  
This license, the Lesser General Public License,  
applies to some specially designated software  
packages--typically libraries--of the Free Soft-  
ware Foundation and other authors who decide  
to use it. You can use it too, but we suggest  
you first think carefully about whether this li-  
cense or the ordinary General Public License is  
the better strategy to use in any particular case,  
based on the explanations below.  
mouse-clicks or menu items--whatever suits  
your program.  
You should also get your employer (if you work  
as a programmer) or your school, if any, to sign  
a "copyright disclaimer" for the program, if  
necessary. Here is a sample; alter the names:  
Yoyodyne, Inc., hereby disclaims all copyright  
interest in the program ‘Gnomovision’ (which  
makes passes at compilers) written by James  
Hacker.  
When we speak of free software, we are refer-  
ring to freedom of use, not price. Our General  
Public Licenses are designed to make sure that  
you have the freedom to distribute copies of  
free software (and charge for this service if you  
wish); that you receive source code or can get  
it if you want it; that you can change the soft-  
ware and use pieces of it in new free programs;  
and that you are informed that you can do  
these things.  
<signature of Ty Coon>, 1 April 1989  
Ty Coon, President of Vice  
This General Public License does not permit in-  
corporating your program into proprietary pro-  
grams. If your program is a subroutine library,  
you may consider it more useful to permit link-  
ing proprietary applications with the library. If  
this is what you want to do, use the GNU Lesser  
General Public License instead of this License.  
To protect your rights, we need to make re-  
strictions that forbid distributors to deny you  
these rights or to ask you to surrender these  
rights. These restrictions translate to  
certain responsibilities for you if you  
distribute copies of the library or if  
you modify it.  
LGPLv2.1  
For example, if you distribute cop-  
ies of the library, whether gratis or for  
a fee, you must give the recipients all  
the rights that we gave  
GNU LESSER GENERAL PUBLIC LICENSE  
Version 2.1, February 1999  
Copyright (C) 1991, 1999 Free Software Foun-  
dation, Inc.  
51  
Franklin  
you. You must make sure that they, too, re-  
Street, Fifth Floor, Boston, MA 02110-1301  
USA  
ceive or can get the source  
other code with the library, you must provide  
code. If you link  
ꢁ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
complete object files to the recipients, so that  
they can relink them with the library after mak-  
ing changes to the library and recompiling it.  
And you must show them these terms so they  
know their rights.  
ing non-free programs. These disadvantages  
are the reason we use the ordinary General  
Public License for many libraries. However, the  
Lesser license provides advantages in certain  
special circumstances. For example, on rare  
occasions, there may be a special need to  
encourage the widest possible use of a certain  
library, so that it becomes a de-facto standard.  
To achieve this, non-free programs must be  
allowed to use the library. A more frequent  
case is that a free library does the same job  
as widely used non-free libraries. In this case,  
there is little to gain by limiting the free library  
to free software only, so we use the Lesser  
We protect your rights with a two-step meth-  
od: (1) we copyright the library, and (2) we of-  
fer you this license, which gives you legal  
permission to copy, distribute and/or modify the  
library.  
To protect each distributor, we want to make  
it very clear that there is no warranty for the  
free library. Also, if the library is modified  
by someone else and passed on, the re-  
cipients should know that what they have is  
not the original version, so that the original  
author's reputation will not be affected by  
problems that might be introduced by oth-  
General Public License.  
In other cases,  
permission to use a particular library in non-  
free programs enables a greater number of  
people to use a large body of free software.  
For example, permission to use the GNU C  
Library in non-free programs enables many  
more people to use the whole GNU operating  
system, as well as its variant, the GNU/Linux  
ers.  
Finally, software patents pose a  
constant threat to the existence of  
any free program. We wish to make sure  
that a company cannot effectively restrict  
the users of a free program by obtaining  
a restrictive license from a patent holder.  
Therefore, we insist that any patent license  
obtained for a version of the library must be  
consistent with the full freedom of use  
specified in this license.  
Most GNU software, including some li-  
braries, is covered by the ordinary GNU  
General Public License. This license, the  
GNU Lesser General Public License, ap-  
plies to certain designated libraries, and  
is quite different from the ordinary General  
Public License. We use this license for certain  
libraries in order to permit linking those librar-  
ies into non-free programs.  
operating system.  
Although the Lesser  
General Public License is Less protective of the  
users' freedom, it does ensure that the user  
of a program that is linked with the Library  
has the freedom and the wherewithal to run  
that program using a modified version of the  
Library.  
The precise  
terms and conditions for copying, distribution  
and modification follow. Pay close attention  
to the difference between a "work based on  
the library" and a "work that uses the library".  
The former contains code derived from the  
library, whereas the latter must be combined  
with the library in order to run.  
GNU LESSER GENERAL PULIC LICENSE  
When a program is linked with a library,  
whether statically or using a shared library, the  
combination of the two is legally speaking a  
combined work, a derivative of the original li-  
brary. The ordinary General Public License  
therefore permits such linking only if the  
entire combination fits its criteria of freedom.  
The Lesser General Public License permits  
more lax criteria for linking other code with  
TERMS AND CONDITIONS FOR COPYING,  
DISTRIBUTION AND MODIFICATION  
0. This License Agreement applies to any  
software library or other program which con-  
tains a notice placed by the copyright holder or  
other authorized party saying it may be  
distributed under the terms of this Lesser  
General Public License (also called "this  
License").Each licensee is addressed as "you".  
A "library" means a collection of software  
functions and/or data prepared so as to be  
conveniently linked with application programs  
(which use some of those functions and data)  
to form executables.  
the library.  
We  
call this license the "Lesser" General Public  
License because it does Less to protect the us-  
er's freedom than the ordinary General Public  
License. It also provides other free software  
developers Less of an advantage over compet-  
ꢁꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The "Library", below, refers to any such  
software library or work which has been  
distributed under these terms. A "work based  
on the Library" means either the Library or any  
derivative work under copyright law: that is to  
say, a work containing the Library or a portion  
of it, either verbatim or with modifications and/  
or translated straightforwardly into another  
language. (Hereinafter, translation is included  
without limitation in the term "modification".)  
"Source code" for a work means the preferred  
form of the work for making modifications to  
it. For a library, complete source code means  
all the source code for all modules it contains,  
plus any associated interface definition files,  
plus the scripts used to control compilation and  
installation of the library.  
Activities other than copying, distribution and  
modification are not covered by this License;  
they are outside its scope. The act of running  
a program using the Library is not restricted,  
and output from such a program is covered  
only if its contents constitute a work based  
on the Library (independent of the use of the  
Library in a tool for writing it). Whether that  
is true depends on what the Library does and  
what the program that uses the Library does.  
1. You may copy and distribute verbatim  
copies of the Library's complete source code  
as you receive it, in any medium, provided  
that you conspicuously and appropriately  
publish on each copy an appropriate copy-  
right notice and disclaimer of warranty; keep  
intact all the notices that refer to this License  
and to the absence of any warranty; and  
distribute a copy of this License along with  
the Library.  
work to be licensed at no charge to all third  
parties under the terms of this License.  
d) If a facility in the modified Library  
refers to a function or a table of data to  
be supplied by an application program that  
uses the facility, other than as an argu-  
ment passed when the facility is invoked,  
then you must make a good faith effort  
to ensure that, in the event an application  
does not supply such function or table, the  
facility still operates, and performs whatever  
part of its purpose remains meaningful.  
(For example, a function in a library to  
compute square roots has a purpose that is  
entirely well-defined independent of the ap-  
plication. Therefore, Subsection 2d requires  
that any application-supplied function or table  
used by this function must be optional: if the  
application does not supply it, the square root  
function must still compute square roots.)  
These requirements apply to the modified  
work as a whole. If identifiable sections of  
that work are not derived from the Library, and  
can be reasonably considered independent  
and separate works in themselves, then this  
License, and its terms, do not apply to those  
sections when you distribute them as separate  
works. But when you distribute the same  
sections as part of a whole which is a work  
based on the Library, the distribution of the  
whole must be on the terms of this License,  
whose permissions for other licensees extend  
to the entire whole, and thus to each and  
every part regardless of who wrote it. Thus, it  
is not the intent of this section to claim rights  
or contest your rights to work written entirely  
by you; rather, the intent is to exercise the  
right to control the distribution of derivative or  
collective works based on the Library. In ad-  
dition, mere aggregation of another work not  
based on the Library with the Library (or with  
a work based on the Library) on a volume of a  
storage or distribution medium does not bring  
the other work under the scope of this License.  
3. You may opt to apply the terms of the  
ordinary GNU General Public License instead  
of this License to a given copy of the Library.  
To do this, you must alter all the notices that  
refer to this License, so that they refer to the  
ordinary GNU General Public License, ver-  
sion 2, instead of to this License. (If a newer  
version than version 2 of the ordinary GNU  
General Public License has appeared, then  
you can specify that version instead if you  
You may charge a fee for the physi-  
cal act of transferring a copy, and you  
may at your option offer warranty pro-  
tection in exchange for a fee.  
2. You may modify your copy or cop-  
ies of the Library or any portion of it, thus  
forming a work based on the Library, and  
copy and distribute such modifications or  
work under the terms of Section 1 above,  
provided that you also meet all of these  
conditions:  
a) The modified work must itself be a soft-  
ware library.  
b) You must cause the files modified to  
carry prominent notices stating that you  
changed the files and the date of any change.  
c) You must cause the whole of the  
ꢁꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
wish.) Do not make any other change in these  
notices. Once this change is made in a given  
copy, it is irreversible for that copy, so the  
ordinary GNU General Public License applies  
to all subsequent copies and derivative works  
made from that copy. This option is useful  
when you wish to copy part of the code of the  
Library into a program that is not a library.  
4. You may copy and distribute the Library  
(or a portion or derivative of it, under Section  
2) in object code or executable form under  
the terms of Sections 1 and 2 above provided  
that you accompany it with the complete  
corresponding machine-readable source code,  
which must be distributed under the terms  
of Sections 1 and 2 above on a medium  
customarily used for software interchange.  
If distribution of object code is made by  
offering access to copy from a designated  
place, then offering equivalent access to copy  
the source code from the same place satisfies  
the requirement to distribute the source code,  
even though third parties are not compelled to  
copy the source along with the object code.  
5. A program that contains no derivative of  
any portion of the Library, but is designed to  
work with the Library by being compiled or  
linked with it, is called a "work that uses the  
Library". Such a work, in isolation, is not a  
derivative work of the Library, and therefore  
falls outside the scope of this License. How-  
ever, linking a "work that uses the Library"  
with the Library creates an executable that  
is a derivative of the Library (because it  
contains portions of the Library), rather than  
a "work that uses the library". The execut-  
able is therefore covered by this License.  
Section 6 states terms for distribution of  
such executables. When a "work that uses  
the Library" uses material from a header file  
that is part of the Library, the object code  
for the work may be a derivative work of the  
Library even though the source code is not.  
Whether this is true is especially significant  
if the work can be linked without the Library,  
or if the work is itself a library. The threshold  
for this to be true is not precisely defined by  
law. If such an object file uses only numeri-  
cal parameters, data structure layouts and  
accessors, and small macros and small inline  
functions (ten lines or less in length), then  
the use of the object file is unrestricted,  
regardless of whether it is legally a deriva-  
tive work. (Executables containing this object  
code plus portions of the Library will still fall  
under Section 6.) Otherwise, if the work is  
a derivative of the Library, you may distribute  
the object code for the work under the terms  
of Section 6.Any executables containing that  
work also fall under Section 6, whether or not  
they are linked directly with the Library itself.  
6. As an exception to the Sections above, you  
may also combine or link a "work that uses  
the Library" with the Library to produce a work  
containing portions of the Library, and distrib-  
ute that work under terms of your choice, pro-  
vided that the terms permit modification of the  
work for the customer's own use and reverse  
engineering for debugging such modifications.  
You must give prominent notice with each  
copy of the work that the Library is used in it  
and that the Library and its use are covered  
by this License. You must supply a copy of  
this License. If the work during execution  
displays copyright notices, you must include  
the copyright notice for the Library among  
them, as well as a reference directing the user  
to the copy of this License. Also, you must do  
one of these things:  
a) Accompany the work  
with the complete corresponding machine-  
readable source code for the Library including  
whatever  
changes were used in the work  
(which must be distributed under Sections 1  
and 2 above); and, if the work is an execut-  
able linked with the Library, with the complete  
machine-readable "work that uses the Library",  
as object code and/or source code, so that the  
user can modify the Library and then relink to  
produce a modified executable containing the  
modified Library. (It is understood that the  
user who changes the contents of definitions  
files in the Library will not necessarily be able  
to recompile the application  
to use the mod-  
ified definitions.) b) Use a suitable shared  
library mechanism for linking with the Library.  
A suitable mechanism is one that (1) uses at  
run time a copy of the library already present  
on the user's computer system, rather than  
copying library functions into the executable,  
and (2) will operate properly with a modified  
version of the library, if the user installs one,  
as long as the modified version is interface-  
compatible with the version that the work was  
made with. c) Accompany the work with a  
written offer, valid for at least three years, to  
give the same user the materials specified in  
Subsection 6a, above, for a charge no more  
than the cost of performing this distribution.  
ꢁꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
d) If distribution of the work is made by offer-  
ing access to copy from a designated place,  
offer equivalent access to copy the above  
specified materials from the same place.  
e) Verify that the user has already received  
a copy of these materials or that you have  
already sent this user a copy. For an execut-  
able, the required form of the "work that  
uses the Library" must include any data and  
utility programs needed for reproducing the  
executable from it. However, as a special  
exception, the materials to be distributed  
need not include anything that is normally  
distributed (in either source or binary form)  
with the major components (compiler, kernel,  
and so on) of the operating system on which  
the executable runs, unless that compo-  
nent itself accompanies the executable.  
It may happen that this requirement contra-  
dicts the license restrictions of other propri-  
etary libraries that do not normally accompany  
the operating system. Such a contradiction  
means you cannot use both them and the  
Library together in an executable that you  
distribute.  
7. You may place library facilities that are a  
work based on the Library side-by-side in a  
single library together with other library facili-  
ties not covered by this License, and distribute  
such a combined library, provided that the  
separate distribution of the work based on  
the Library and of the other library facilities is  
otherwise permitted, and provided that you do  
these two things:  
a) Accompany the combined library with a  
copy of the same work based on the Library,  
uncombined with any other library facilities.  
This must be distributed under the terms  
of the Sections above.  
9. You are not required to accept this  
License, since you have not signed it.  
However, nothing else grants you permis-  
sion to modify or distribute the Library or  
its derivative works. These actions are  
prohibited by law if you do not accept this  
License. Therefore, by modifying or distrib-  
uting the Library (or any work based on the  
Library), you indicate your acceptance of this  
License to do so, and all its terms and condi-  
tions for copying, distributing or modifying  
the Library or works based on it.  
10. Each time you redistribute the Library  
(or any work based on the Library), the  
recipient automatically receives a license from  
the original licensor to copy, distribute, link  
with or modify the Library subject to these  
terms and conditions. You may not impose  
any further restrictions on the recipients'  
exercise of the rights granted herein. You  
are not responsible for enforcing compli-  
ance by third parties with this License.  
11. If, as a consequence of a court judgment  
or allegation of patent infringement or for any  
other reason (not limited to patent issues),  
conditions are imposed on you (whether by  
court order, agreement or otherwise) that con-  
tradict the conditions of this License, they do  
not excuse you from the conditions of this Li-  
cense. If you cannot distribute so as to satisfy  
simultaneously your obligations under this Li-  
cense and any other pertinent obligations, then  
as a consequence you may not distribute the  
Library at all. For example, if a patent license  
would not permit royalty-free redistribution  
of the Library by all those who receive copies  
directly or indirectly through you, then the only  
way you could satisfy both it and this License  
would be to refrain entirely from distribution of  
the Library.  
b) Give prominent notice with the com-  
bined library of the fact that part of it is  
a work based on the Library, and explain-  
ing where to find the accompanying  
If any portion of this section is held in-  
valid or unenforceable under any particular  
circumstance, the balance of the section is  
intended to apply, and the section as a whole  
is intended to apply in other circumstances. It  
is not the purpose of this section to induce you  
to infringe any patents or other property right  
claims or to contest validity of any such claims;  
this section has the sole purpose of protecting  
the integrity of the free software distribution  
system which is implemented by public license  
practices. Many people have made generous  
contributions to the wide range of software  
distributed through that system in reliance  
uncombined form of the same work.  
8. You may not copy, modify, sublicense,  
link with, or distribute the Library except as  
expressly provided under this License. Any  
attempt otherwise to copy, modify, sublicense,  
link with, or distribute the Library is void, and  
will automatically terminate your rights under  
this License. However, parties who have re-  
ceived copies, or rights, from you under this Li-  
cense will not have their licenses terminated so  
long as such parties remain in full compliance.  
ꢁꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
on consistent application of that system; it is  
up to the author/donor to decide if he or she  
is willing to distribute software through any  
other system and a licensee cannot impose  
that choice. This section is intended to make  
thoroughly clear what is believed to be a  
consequence of the rest of this License.  
12. If the distribution and/or use of the Li-  
brary is restricted in certain countries either by  
patents or by copyrighted interfaces, the origi-  
nal copyright holder who places the Library  
under this License may add an explicit geo-  
graphical distribution limitation excluding those  
countries, so that distribution is permitted only  
in or among countries not thus excluded. In  
such case, this License incorporates the limita-  
tion as if written in the body of this License.  
13. The Free Software Foundation may  
publish revised and/or new versions of the  
Lesser General Public License from time to  
time. Such new versions will be similar in  
spirit to the present version, but may differ in  
detail to address new problems or concerns.  
Each version is given a distinguishing version  
number. If the Library specifies a version  
number of this License which applies to it and  
"any later version", you have the option of  
following the terms and conditions either of  
that version or of any later version published  
by the Free Software Foundation. If the  
Library does not specify a license version  
number, you may choose any version ever  
published by the Free Software Foundation.  
14. If you wish to incorporate parts of the  
Library into other free programs whose distri-  
bution conditions are incompatible with these,  
write to the author to ask for permission. For  
software which is copyrighted by the Free Soft-  
ware Foundation, write to the Free Software  
Foundation; we sometimes make exceptions  
for this. Our decision will be guided by the two  
goals of preserving the free status of all de-  
rivatives of our free software and of promoting  
the sharing and reuse of software generally.  
ANY KIND, EITHER EXPRESSED OR IMPLIED,  
INCLUDING, BUT NOT LIMITED TO, THE IM-  
PLIED WARRANTIES OF MERCHANTABILITY  
AND FITNESS FOR A PARTICULAR PURPOSE.  
THE ENTIRE RISK AS TO THE QUALITY AND  
PERFORMANCE OF THE LIBRARY IS WITH  
YOU. SHOULD THE LIBRARY PROVE DEFEC-  
TIVE, YOU ASSUME THE COST OF ALL NECES-  
SARY SERVICING, REPAIR OR CORRECTION.  
16. IN NO EVENT UNLESS REQUIRED BY AP-  
PLICABLE LAW OR AGREED TO IN WRITING  
WILL ANY COPYRIGHT HOLDER, OR ANY OTH-  
ER PARTY WHO MAY MODIFY AND/OR REDIS-  
TRIBUTE THE LIBRARY AS PERMITTED ABOVE,  
BE LIABLE TO YOU FOR DAMAGES, INCLUDING  
ANY GENERAL, SPECIAL, INCIDENTAL OR CON-  
SEQUENTIAL DAMAGES ARISING OUT OF THE  
USE OR INABILITY TO USE THE LIBRARY (IN-  
CLUDING BUT NOT LIMITED TO LOSS OF DATA  
OR DATA BEING RENDERED INACCURATE OR  
LOSSES SUSTAINED BY YOU OR THIRD PAR-  
TIES OR A FAILURE OF THE LIBRARY TO OPER-  
ATE WITH ANY OTHER SOFTWARE), EVEN IF  
SUCH HOLDER OR OTHER PARTY HAS BEEN  
ADVISED OF THE POSSIBILITY OF SUCH DAM-  
AGES.  
END OF TERMS AND CONDITIONS  
How to Apply These Terms to Your New Librar-  
ies  
If you develop a new library, and you want it  
to be of the greatest possible use to the pub-  
lic, we recommend making it free software that  
everyone can redistribute and change. You can  
do so by permitting redistribution under these  
terms (or, alternatively, under the terms of the  
ordinary General Public License). To apply  
these terms, attach the following notices to the  
library. It is safest to attach them to the start  
of each source file to most effectively convey  
the exclusion of warranty; and each file should  
have at least the "copyright" line and a pointer  
to where the full notice is found.  
<one line to give the library's name and a  
brief idea of what it does.>  
NO WARRANTY  
Copyright (C) <year> <name of author>  
15. BECAUSE THE LIBRARY IS LICENSED FREE  
OF CHARGE, THERE IS NO WARRANTY FOR  
THE LIBRARY, TO THE EXTENT PERMITTED BY  
APPLICABLE LAW. EXCEPT WHEN OTHERWISE  
STATED IN WRITING THE COPYRIGHT HOLD-  
ERS AND/OR OTHER PARTIES PROVIDE THE  
LIBRARY "AS IS" WITHOUT WARRANTY OF  
This library is free software; you can redis-  
tribute it and/or modify it under the terms of  
the GNU Lesser General Public License as pub-  
lished by the Free Software Foundation; either  
version 2.1 of the License, or (at your option)  
any later version.  
This library is distributed in the hope that it  
ꢁꢄ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
will be useful, but WITHOUT ANY WARRANTY;  
without even the implied warranty of MER-  
CHANTABILITY or FITNESS FOR A PARTICULAR  
PURPOSE. See the GNU Lesser General Public  
License for more details. You should have re-  
ceived a copy of the GNU Lesser General Public  
License along with this library; if not, write to  
the Free Software Foundation, Inc., 51 Frank-  
lin Street, Fifth Floor, Boston, MA 02110-1301  
USA Also add information on how to contact you  
by electronic and paper mail. You should also  
get your employer (if you work as a program-  
mer) or your school, if any, to sign a "copyright  
disclaimer" for the library, if necessary. Here  
is a sample; alter the names: Yoyodyne, Inc.,  
hereby disclaims all copyright interest in the li-  
brary `Frob' (a library for tweaking knobs) writ-  
ten by James Random Hacker.  
RECT OR CONSEQUENTIAL DAMAGES, OR ANY  
DAMAGES WHATSOEVER RESULTING FROM  
LOSS OF USE, DATA OR PROFITS, WHETHER  
IN AN ACTION OF CONTRACT, NEGLIGENCE OR  
OTHER TORTIOUS ACTION, ARISING OUT OF  
OR IN CONNECTION WITH THE USE OR PER-  
FORMANCE OF THIS SOFTWARE.  
Except as contained in this notice, the name  
of a copyright holder shall not be used in ad-  
vertising or otherwise to promote the sale, use  
or other dealings in this Software without prior  
written authorization of the copyright holder.  
All trademarks and registered trademarks men-  
tioned herein are the property of their respec-  
tive owners.  
<signature of Ty Coon>, 1 April 1990  
Ty Coon, President of Vice  
That's all there is to it!  
LICENSE ISSUES  
LICENSE ISSUES  
==============  
ICU License - ICU 1.8.1 and later  
The OpenSSL toolkit stays under a dual li-  
cense, i.e. both the conditions of  
COPYRIGHT AND PERMISSION NOTICE  
the OpenSSL License and the original SSLeay  
license apply to the toolkit.  
See below for the actual license texts. Actually  
both licenses are BSD-style  
Copyright (c) 1995-2009 International Business  
Machines Corporation and others  
All rights reserved.  
Open Source licenses. In case of any license  
issues related to OpenSSL  
Permission is hereby granted, free of charge,  
to any person obtaining a copy of this software  
and associated documentation files (the "Soft-  
ware"), to deal in the Software without restric-  
tion, including without limitation the rights to  
use, copy, modify, merge, publish, distribute,  
and/or sell copies of the Software, and to per-  
mit persons to whom the Software is furnished  
to do so, provided that the above copyright  
notice(s) and this permission notice appear in  
all copies of the Software and that both the  
above copyright notice(s) and this permission  
notice appear in supporting documentation.  
please contact [email protected].  
OpenSSL License  
---------------  
/* ===========================  
============================  
=============  
* Copyright (c) 1998-2008 The OpenSSL Proj-  
ect. All rights reserved.  
*
* Redistribution and use in source and binary  
forms, with or without  
* modification, are permitted provided that the  
following conditions  
* are met:  
*
THE SOFTWARE IS PROVIDED "AS IS", WITH-  
OUT WARRANTY OF ANY KIND, EXPRESS OR  
IMPLIED, INCLUDING BUT NOT LIMITED TO  
THE WARRANTIES OF MERCHANTABILITY, FIT-  
NESS FOR A PARTICULAR PURPOSE AND NON-  
INFRINGEMENT OF THIRD PARTY RIGHTS. IN  
NO EVENT SHALL THE COPYRIGHT HOLDER OR  
HOLDERS INCLUDED IN THIS NOTICE BE LI-  
ABLE FOR ANY CLAIM, OR ANY SPECIAL INDI-  
* 1. Redistributions of source code must retain  
the above copyright  
*
notice, this list of conditions and the follow-  
ing disclaimer.  
*
* 2. Redistributions in binary form must repro-  
ꢁꢅ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
* HOWEVER CAUSED AND ON ANY THEORY  
OF LIABILITY, WHETHER IN CONTRACT,  
* STRICT LIABILITY, OR TORT (INCLUDING  
NEGLIGENCE OR OTHERWISE)  
* ARISING IN ANY WAY OUT OF THE USE OF  
THIS SOFTWARE, EVEN IF ADVISED  
* OF THE POSSIBILITY OF SUCH DAMAGE.  
* ===========================  
============================  
=============  
*
*
* This product includes cryptographic software  
written by Eric Young  
*
for use in the OpenSSL Toolkit. (http://  
* ([email protected]). This product includes  
software written by Tim  
www.openssl.org/)"  
*
* Hudson ([email protected]).  
*
* 4. The names "OpenSSL Toolkit" and "OpenS-  
SL Project" must not be used to  
*/  
*
endorse or promote products derived from  
this software without  
*
Original SSLeay License  
-----------------------  
prior written permission. For written per-  
mission, please contact  
*
*
[email protected].  
/* Copyright (C) 1995-1998 Eric Young (eay@  
cryptsoft.com)  
* 5. Products derived from this software may  
not be called "OpenSSL"  
* All rights reserved.  
*
*
nor may "OpenSSL" appear in their names  
* This package is an SSL implementation writ-  
ten  
without prior written  
*
*
permission of the OpenSSL Project.  
* by Eric Young ([email protected]).  
* The implementation was written so as to con-  
form with Netscapes SSL.  
* 6. Redistributions of any form whatsoever  
must retain the following  
*
*
*
acknowledgment:  
"This product includes software developed  
* This library is free for commercial and non-  
commercial use as long as  
by the OpenSSL Project  
for use in the OpenSSL Toolkit (http://www.  
openssl.org/)"  
* the following conditions are aheared to. The  
following conditions  
* apply to all code found in this distribution, be  
it the RC4, RSA,  
*
*
* THIS SOFTWARE IS PROVIDED BY THE  
OpenSSL PROJECT ``AS IS'' AND ANY  
* EXPRESSED OR IMPLIED WARRANTIES, IN-  
CLUDING, BUT NOT LIMITED TO, THE  
* IMPLIED WARRANTIES OF MERCHANTABIL-  
ITY AND FITNESS FOR A PARTICULAR  
* PURPOSE ARE DISCLAIMED. IN NO EVENT  
SHALL THE OpenSSL PROJECT OR  
* ITS CONTRIBUTORS BE LIABLE FOR ANY DI-  
RECT, INDIRECT, INCIDENTAL,  
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  
DAMAGES (INCLUDING, BUT  
* NOT LIMITED TO, PROCUREMENT OF SUB-  
STITUTE GOODS OR SERVICES;  
* lhash, DES, etc., code; not just the SSL code.  
The SSL documentation  
* included with this distribution is covered by  
the same copyright terms  
* except that the holder is Tim Hudson (tjh@  
cryptsoft.com).  
*
* Copyright remains Eric Young's, and as such  
any Copyright notices in  
* the code are not to be removed.  
* If this package is used in a product, Eric  
Young should be given attribution  
* as the author of the parts of the library  
used.  
* LOSS OF USE, DATA, OR PROFITS; OR BUSI-  
NESS INTERRUPTION)  
* This can be in the form of a textual message  
at program startup or  
ꢁꢆ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
* in documentation (online or textual) provided  
with the package.  
*
* Redistribution and use in source and binary  
forms, with or without  
LIGENCE OR OTHERWISE) ARISING IN ANY  
WAY  
* OUT OF THE USE OF THIS SOFTWARE, EVEN  
IF ADVISED OF THE POSSIBILITY OF  
* SUCH DAMAGE.  
*
* The licence and distribution terms for any  
publically available version or  
* derivative of this code cannot be changed.  
i.e. this code cannot simply be  
* copied and put under another distribution  
licence  
* 2. Redistributions in binary form must repro-  
duce the above copyright  
* [including the GNU Public Licence.]  
*/  
*
notice, this list of conditions and the follow-  
ing disclaimer in the  
documentation and/or other materials pro-  
*
zlib  
vided with the distribution.  
* 3. All advertising materials mentioning fea-  
tures or use of this software  
/* zlib.h -- interface of the 'zlib' general purpose  
compression library  
*
must display the following acknowledge-  
version 1.2.3, July 18th, 2005  
ment:  
*
"This product includes cryptographic soft-  
Copyright (C) 1995-2005 Jean-loup Gailly and  
ware written by  
Mark Adler  
*
*
Eric Young ([email protected])"  
The word 'cryptographic' can be left out if  
This software is provided 'as-is', without any  
express or implied  
the routines from the library  
*
:-).  
being used are not cryptographic related  
warranty. In no event will the authors be held  
liable for any damages  
* 4. If you include any Windows specific code  
(or a derivative thereof) from  
arising from the use of this software.  
*
the apps directory (application code) you  
must include an acknowledgement:  
"This product includes software written by  
Permission is granted to anyone to use this  
software for any purpose,  
including commercial applications, and to alter  
it and redistribute it  
*
Tim Hudson ([email protected])"  
*
freely, subject to the following restrictions:  
* THIS SOFTWARE IS PROVIDED BY ERIC  
YOUNG ``AS IS'' AND  
* ANY EXPRESS OR IMPLIED WARRANTIES,  
INCLUDING, BUT NOT LIMITED TO, THE  
* IMPLIED WARRANTIES OF MERCHANTABIL-  
ITY AND FITNESS FOR A PARTICULAR PUR-  
POSE  
* ARE DISCLAIMED. IN NO EVENT SHALL THE  
AUTHOR OR CONTRIBUTORS BE LIABLE  
* FOR ANY DIRECT, INDIRECT, INCIDENTAL,  
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL  
* DAMAGES (INCLUDING, BUT NOT LIMITED  
TO, PROCUREMENT OF SUBSTITUTE GOODS  
* OR SERVICES; LOSS OF USE, DATA, OR  
PROFITS; OR BUSINESS INTERRUPTION)  
* HOWEVER CAUSED AND ON ANY THEORY OF  
LIABILITY, WHETHER IN CONTRACT, STRICT  
* LIABILITY, OR TORT (INCLUDING NEG-  
1. The origin of this software must not be  
misrepresented; you must not  
claim that you wrote the original software. If  
you use this software  
in a product, an acknowledgment in the  
product documentation would be  
appreciated but is not required.  
2. Altered source versions must be plainly  
marked as such, and must not be  
misrepresented as being the original soft-  
ware.  
3. This notice may not be removed or altered  
from any source distribution.  
Jean-loup Gailly [email protected]  
Mark Adler [email protected]  
*/  
ꢁꢇ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The FreeType Project LICENSE  
compliance with this license. We thus  
encourage you to use the following text:  
2006-Jan-27  
Copyright 1996-2002, 2006 by David Turner,  
Robert Wilhelm, and Werner Lemberg  
"""  
Portions of this software are copyright ©  
<year> The FreeType Project (www.freetype.  
org). All rights reserved.  
Introduction  
============  
"""  
The FreeType Project is distributed in several  
archive packages;  
some of them may contain, in addition to the  
FreeType font engine,various tools and contri-  
butions which rely on, or relate to, the FreeType  
Project.  
Please replace <year> with the value from the  
FreeType version you actually use.  
Legal Terms  
===========  
This license applies to all files found in  
such packages, and which do not fall under  
their own explicit license. The license affects  
thus the FreeType font engine, the test  
programs,documentation and makefiles, at the  
very least.  
0. Definitions  
Throughout this license, the terms `package',  
`FreeType Project', and `FreeType archive' re-  
fer to the set of files originally distributed  
by the authors (David Turner, Robert Wilhelm,  
and Werner Lemberg) as the `FreeType Project',  
be they named as alpha, beta or final release.  
This license was inspired by the BSD,  
Artistic, and IJG (Independent JPEG Group)  
licenses, which all encourage inclusion and use  
of free software in commercial and freeware  
products alike. As a consequence, its main  
points are that:  
`You' refers to the licensee, or person us-  
ing the project, where`using' is a generic term  
including compiling the project's source code  
as well as linking it to form a `program' or  
`executable'.  
This program is referred to as `a program  
using the FreeType engine'.  
We don't promise that this software works.  
However, we will be interested in any kind of  
bug reports. (`as is' distribution)  
You can use this software for whatever you  
want, in parts or full form, without having to  
pay us. (`royalty-free' usage)  
This license applies to all files distributed in  
the original FreeType Project, including all  
source code, binaries and documentation,  
unless otherwise stated in the file in its  
original, unmodified form as distributed in the  
original archive.  
If you are unsure whether or not a particular  
file is covered by this license, you must contact  
us to verify this.  
You may not pretend that you wrote this  
software. If you use it, or only parts of it, in  
a program, you must acknowledge somewhere  
in your documentation that you have used  
the FreeType code. (`credits')  
We specifically permit and encourage the  
inclusion of this software, with or without  
modifications, in commercial products. We dis-  
claim all warranties covering The FreeType  
Project and assume no liability related to The  
FreeType Project.  
The FreeType Project is copyright (C) 1996-  
2000 by David Turner,  
Robert Wilhelm, and Werner Lemberg. All  
rights reserved except as  
specified below.  
1. No Warranty  
Finally, many people asked us for a pre-  
ferred form for a credit/disclaimer to use in  
THE FREETYPE PROJECT IS PROVIDED `AS  
ꢂ0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
one or more of the following phrases to refer  
to this software in your documentation or adver-  
tising materials: `FreeType Project', `FreeType  
Engine', `FreeType library', or `FreeType Distri-  
bution'.  
IS' WITHOUT WARRANTY OF ANY  
KIND, EITHER EXPRESS OR IMPLIED, IN-  
CLUDING, BUT NOT LIMITED TO,  
WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR  
PURPOSE. IN NO EVENT WILL ANY OF THE  
AUTHORS OR COPYRIGHT HOLDERS  
BE LIABLE FOR ANY DAMAGES CAUSED BY  
THE USE OR THE INABILITY TO  
As you have not signed this license, you  
are not required to accept it. However, as  
the FreeType Project is copyrighted material,  
only this license, or another one contracted  
with the authors, grants you the right to use,  
distribute, and modify it.  
USE, OF THE FREETYPE PROJECT.  
2. Redistribution  
Therefore, by using, distributing, or modi-  
fying the FreeType Project, you indicate that  
you understand and accept all the terms of this  
license.  
This license grants a worldwide, royalty-free,  
perpetual and irrevocable right and license to  
use, execute, perform, compile,display, copy,  
create derivative works of, distribute and  
sublicense the FreeType Project (in both  
source and object code forms) and deriva-  
tive works thereof for any purpose; and to  
authorize others to exercise some or all of the  
rights granted herein, subject to the following  
conditions:  
4. Contacts  
There are two mailing lists related to  
FreeType:  
[email protected]  
Discusses general use and applications of  
FreeType, as well as future and wanted addi-  
tions to the library and distribution.  
If you are looking for support, start in  
this list if you  
haven't found anything to help you in the  
documentation.  
Redistribution of source code must re-  
tain this license file (`FTL.TXT') unaltered; any  
additions, deletions or changes to the original  
files must be clearly indicated in accompanying  
documentation. The copyright notices of the  
unaltered,original files must be preserved in  
all copies of source files.  
[email protected]  
Redistribution in binary form must provide  
a disclaimer that states that the software is  
based in part of the work of the FreeType Team,  
in the distribution documentation. We also  
encourage you to put an URL to the FreeType  
web page in your documentation, though this  
isn't mandatory.  
Discusses bugs, as well as engine internals,  
design issues,specific licenses, porting, etc.  
Our home page can be found at  
http://www.freetype.org  
These conditions apply to any software de-  
rived from or based on the FreeType Project,  
not just the unmodified files. If you use our  
work, you must acknowledge us. However, no  
fee need be paid to us.  
Expat  
Copyright (c) 1998, 1999, 2000 Thai Open  
Source Software Center Ltd and Clark Cooper  
Copyright (c) 2001, 2002, 2003, 2004, 2005,  
2006 Expat maintainers.  
3. Advertising  
Neither the FreeType authors and contribu-  
tors nor you shall use the name of the other  
for commercial, advertising, or promotional pur-  
poses without specific prior written permission.  
Permission is hereby granted, free of charge,  
to any person obtaining a copy of this software  
and associated documentation files (the Soft-  
ware), to deal in the Software without restric-  
tion, including without limitation the rights to  
We suggest, but do not require, that you use  
ꢂ1  
Download from Www.Somanuals.com. All Manuals Search And Download.  
use, copy, modify, merge, publish, distribute,  
sublicense, and/or sell copies of the Software,  
and to permit persons to whom the Software  
is furnished to do so, subject to the following  
conditions:  
Except as contained in this notice, the name of  
a copyright holder shall not  
be used in advertising or otherwise to promote  
the sale, use or other dealings  
in this Software without prior written authoriza-  
tion of the copyright holder.  
The above copyright notice and this permission  
notice shall be included in all copies or substan-  
tial portions of the Software.  
IJG  
THE SOFTWARE IS PROVIDED "AS IS", WITH-  
OUT WARRANTY OF ANY KIND,  
EXPRESS OR IMPLIED, INCLUDING BUT NOT  
LIMITED TO THE WARRANTIES OF  
1. We don't promise that this software works.  
(But if you find any bugs,please let us know!)  
2. You can use this software for whatever you  
want. You don't have to pay us.  
MERCHANTABILITY, FITNESS FOR A PARTICU-  
LAR PURPOSE AND NONINFRINGEMENT.  
IN NO EVENT SHALL THE AUTHORS OR COPY-  
RIGHT HOLDERS BE LIABLE FOR ANY  
CLAIM, DAMAGES OR OTHER LIABILITY,  
WHETHER IN AN ACTION OF CONTRACT,  
TORT OR OTHERWISE, ARISING FROM, OUT  
OF OR IN CONNECTION WITH THE  
3. You may not pretend that you wrote this soft-  
ware. If you use it in a program, you must ac-  
knowledge somewhere in your documentation  
that you've used the IJG code.  
In legalese:  
The authors make NO WARRANTY or represen-  
tation, either express or implied,with respect to  
this software, its quality, accuracy, merchant-  
ability, or fitness for a particular purpose. This  
software is provided "AS IS", and you, its user,  
assume the entire risk as to its quality and ac-  
curacy.  
SOFTWARE OR THE USE OR OTHER DEALINGS  
IN THE SOFTWARE.  
Curl  
COPYRIGHT AND PERMISSION NOTICE  
Copyright (c) 1996 - 2008, Daniel Stenberg,  
<[email protected]>.  
This software is copyright (C) 1991-1998,  
Thomas G. Lane.  
All Rights Reserved except as specified below.  
All rights reserved.  
Permission is hereby granted to use, copy,  
modify, and distribute this software (or portions  
thereof) for any purpose, without fee, subject  
to these conditions:  
(1) If any part of the source code for this soft-  
ware is distributed, then this README file must  
be included, with this copyright and no-warranty  
notice unaltered; and any additions, deletions,  
or changes to the original files must be clearly  
indicated in accompanying documentation.  
(2) If only executable code is distributed, then  
the accompanying documentation must state  
that "this software is based in part on the work  
of the Independent JPEG Group".  
Permission to use, copy, modify, and distribute  
this software for any purpose with or without  
fee is hereby granted, provided that the above  
copyright notice and this permission notice ap-  
pear in all copies.  
THE SOFTWARE IS PROVIDED "AS IS", WITH-  
OUT WARRANTY OF ANY KIND, EXPRESS OR  
IMPLIED, INCLUDING BUT NOT LIMITED TO  
THE WARRANTIES OF MERCHANTABILITY,  
FITNESS FOR A PARTICULAR PURPOSE AND  
NONINFRINGEMENT OF THIRD PARTY RIGHTS.  
IN  
NO EVENT SHALL THE AUTHORS OR COPY-  
RIGHT HOLDERS BE LIABLE FOR ANY CLAIM,  
DAMAGES OR OTHER LIABILITY, WHETHER IN  
AN ACTION OF CONTRACT, TORT OR  
(3) Permission for use of this software is granted  
only if the user accepts full responsibility for any  
undesirable consequences; the authors accept  
NO LIABILITY for damages of any kind.  
OTHERWISE, ARISING FROM, OUT OF OR IN  
CONNECTION WITH THE SOFTWARE OR THE  
USE OR OTHER DEALINGS IN THE SOFTWARE.  
These conditions apply to any software derived  
from or based on the IJG code, not just to the  
ꢂꢀ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
unmodified library. If you use our work, you  
ought to acknowledge us.  
To avoid entanglement with the Unisys LZW  
patent, GIF reading support has  
been removed altogether, and the GIF writer  
has been simplified to produce  
uncompressed GIFs. This technique does not  
use the LZW algorithm; the  
resulting GIF files are larger than usual, but are  
readable by all standard  
GIF decoders.  
Permission is NOT granted for the use of any IJG  
author's name or company name in advertising  
or publicity relating to this software or products  
derived from it. This software may be referred  
to only as "the Independent JPEG Group's  
software".  
We specifically permit and encourage the use  
of this software as the basis of commercial  
products, provided that all warranty or liability  
claims are assumed by the product vendor.  
We are required to state that "The Graphics  
Interchange Format(c) is the Copyright prop-  
erty of CompuServe Incorporated. GIF(sm) is  
a Service Mark property of CompuServe Incor-  
porated."  
ansi2knr.c is included in this distribution by per-  
mission of L. Peter Deutsch, sole proprietor of  
its copyright holder, Aladdin Enterprises of Men-  
lo Park, CA. ansi2knr.c is NOT covered by the  
above copyright and conditions, but instead  
by the usual distribution terms of the Free Soft-  
ware Foundation; principally,that you must in-  
clude source code if you redistribute it. (See the  
file ansi2knr.c for full details.) However, since  
ansi2knr.c is not needed as part of any program  
generated from the IJG code, this does not limit  
you more than the foregoing paragraphs do.  
CharisSIL OFL  
SIL OPEN FONT LICENSE Version 1.1 - 26 Feb-  
ruary 2007  
PREAMBLE  
The goals of the Open Font License (OFL) are to  
stimulate worldwide development of collabora-  
tive font projects, to support the font creation  
efforts of academic and linguistic communities,  
and to provide a free and open framework in  
which fonts may be shared and improved in  
partnership with others.  
The Unix configuration script "configure" was  
produced with GNU Autoconf.  
It is copyright by the Free Software Foundation  
but is freely distributable.  
The same holds for its supporting scripts (con-  
fig.guess, config.sub,ltconfig, ltmain.sh). An-  
other support script, install-sh, is copyright  
by M.I.T. but is also freely distributable.  
The OFL allows the licensed fonts to be used,  
studied, modified and redistributed freely as  
long as they are not sold by themselves. The  
fonts, including any derivative works, can be  
bundled, embedded, redistributed and/or sold  
with any software provided that any reserved  
names are not used by derivative works. The  
fonts and derivatives,however, cannot be re-  
leased under any other type of license. The  
requirement for fonts to remain under this li-  
cense does not apply to any document created  
using the fonts or their derivatives.  
It appears that the arithmetic coding option of  
the JPEG spec is covered by patents owned by  
IBM, AT&T, and Mitsubishi. Hence arithmetic  
coding cannot legally be used without obtaining  
one or more licenses. For this reason,support  
for arithmetic coding has been removed from  
the free JPEG software.  
DEFINITIONS  
(Since arithmetic coding provides only a mar-  
ginal gain over the unpatented Huffman mode,  
it is unlikely that very many implementations  
will support it.)  
Font Software refers to the set of files released  
by the Copyright Holder(s) under this license  
and clearly marked as such. This may include  
source files, build scripts and documentation.  
So far as we are aware, there are no patent  
restrictions on the remaining code.  
Reserved Font Name refers to any names speci-  
fied as such after the copyright statement(s).  
The IJG distribution formerly included code to  
read and write GIF files.  
Original Version refers to the collection of Font  
ꢂꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Software components as distributed by the  
Copyright Holder(s).  
under any other license. The requirement for  
fonts to remain under this license does not ap-  
ply to any document created using the Font  
Software.  
Modified Version refers to any derivative made  
by adding to, deleting,or substituting -- in part  
or in whole -- any of the components of the  
Original Version, by changing formats or by  
porting the Font Software to a new environ-  
ment.  
TERMINATION  
This license becomes null and void if any of the  
above conditions are not met.  
DISCLAIMER  
Author refers to any designer, engineer, pro-  
grammer, technical writer or other person who  
contributed to the Font Software.  
THE FONT SOFTWARE IS PROVIDED "AS IS",  
WITHOUT WARRANTY OF ANY KIND,EXPRESS  
OR IMPLIED, INCLUDING BUT NOT LIMITED  
TO ANY WARRANTIES OF MERCHANTABILITY,  
FITNESS FOR A PARTICULAR PURPOSE AND  
NONINFRINGEMENT OF COPYRIGHT, PAT-  
ENT, TRADEMARK, OR OTHER RIGHT. IN NO  
EVENT SHALL THE COPYRIGHT HOLDER BE LI-  
ABLE FOR ANY CLAIM, DAMAGES OR OTHER  
LIABILITY,INCLUDING ANY GENERAL, SPECIAL,  
INDIRECT, INCIDENTAL, OR CONSEQUENTIAL  
DAMAGES, WHETHER IN AN ACTION OF CON-  
TRACT, TORT OR OTHERWISE, ARISING  
FROM, OUT OF THE USE OR INABILITY TO USE  
THE FONT SOFTWARE OR FROM OTHER DEAL-  
INGS IN THE FONT SOFTWARE.  
PERMISSION & CONDITIONS  
Permission is hereby granted, free of charge,  
to any person obtaining a copy of the Font  
Software, to use, study, copy, merge, embed,  
modify, redistribute, and sell modified and un-  
modified copies of the Font Software, subject to  
the following conditions:  
1) Neither the Font Software nor any of its indi-  
vidual components,in Original or Modified Ver-  
sions, may be sold by itself.  
2) Original or Modified Versions of the Font Soft-  
ware may be bundled,redistributed and/or sold  
with any software, provided that each copy  
contains the above copyright notice and this  
license. These can be included either as stand-  
alone text files, human-readable headers or  
in the appropriate machine-readable metadata  
fields within text or binary files as long as those  
fields can be easily viewed by the user.  
3) No Modified Version of the Font Software  
may use the Reserved Font Name(s) unless ex-  
plicit written permission is granted by the corre-  
sponding Copyright Holder. This restriction only  
applies to the primary font name as presented  
to the users.  
4) The name(s) of the Copyright Holder(s) or  
the Author(s) of the Font Software shall not be  
used to promote, endorse or advertise any  
Modified Version, except to acknowledge the  
contribution(s) of the Copyright Holder(s) and  
the Author(s) or with their explicit written  
permission.  
5) The Font Software, modified or unmodified,  
in part or in whole,must be distributed entirely  
under this license, and must not be distributed  
ꢂꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Limited Canadian Warranty  
For Toshiba Brand Digital Audio/Video Products  
Toshiba of Canada Limited ("TCL") makes the following limited warranties to original consumers in  
Canada. THESE LIMITED WARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER  
OR ANY PERSON RECEIVING THIS TOSHIBA BRAND DIGITALAUDIO/VIDEO PRODUCT (the "DAV  
PRODUCT(S)" or "DAV Product(s)") AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND TO  
NO OTHER PURCHASER OR TRANSFEREE.  
DAV PRODUCTS PURCHASED IN CANADA, AND USED ANYWHERE OUTSIDE OF CANADA INCLUDING,  
WITHOUT LIMITATION, THE UNITED STATES AND MEXICO, ARE NOT COVERED BY THESE WARRAN-  
TIES.  
DAV PRODUCTS PURCHASED ANYWHERE OUTSIDE OF CANADA, INCLUDING, WITHOUT LIMITA-  
TION, THE UNITED STATES AND MEXICO, AND USED IN CANADA, ARE NOT COVERED BY THESE  
WARRANTIES.  
▪ Limited One (1) Year Warranty on Parts and Labour  
TCL warrants the DAV Product and its parts against material defects in materials or workmanship that  
result in the DAV Product failing for a period of one (1) year after the date of original retail purchase.  
DURING THIS PERIOD, TCL WILL, AT TCL’S OPTION, REPAIR OR REPLACE A DEFECTIVE  
PART WITH A NEW OR REFURBISHED PART, WITHOUT CHARGE TO YOU FOR PARTS OR  
LABOUR.  
▪ Rental Units  
▪ The warranty for DAV Product rental units begins with the date of first rental or thirty (30) days from the  
date of shipment to the rental firm, whichever comes first.  
▪ Your Responsibility  
▪ Read the owner’s manual thoroughly before operating this DAV Product. Complete and mail the  
enclosed product registration card or register your DAV Product online at www.toshiba.ca/warranty.  
Registration of your DAV Product will enable TCL to contact you in the unlikely event of a product  
safety notice. Failure to complete the product registration does not diminish your warranty rights.  
▪ THE ABOVE WARRANTIES ARE SUBJECT TO THE FOLLOWING CONDITIONS:  
1. You must provide your bill of sale or other proof of purchase.  
2. The warranties from TCL are effective only if the DAV Product is (i) purchased as new and unopened  
from TCL or from TCL’s authorized distributors, dealers or resellers ("ADR’s") and (ii) located/operated  
in Canada.  
3. Warranties extend only to material defects in materials or workmanship as limited above, and do not  
extend to:  
a. Service, repairs or replacement made necessary by accident, misuse, abuse, moisture, liquids, dust, dirt,  
neglect, accident, damage, 24/7 applications, improper installation, improper operation, improper  
cleaning, improper maintenance, normal wear and tear, or any other external cause or event, act or  
omission outside the control of TCL, including fire, theft, acts of God, alteration, power failures, power  
surges or power shortages, lightning, other electrical faults, or repairs, modifications or replacements  
by persons other than those authorized by TCL to service the DAV Product;  
b. Replacement of missing, discarded or lost parts, the provision of retrofits, or preventive maintenance;  
c. Repair of damage that is cosmetic only or does not affect the DAV Product functionality, such as wear  
and tear, scratches and dents;  
d. Service on Toshiba-branded accessory items (such accessory items may be covered by their own war  
ranty);  
e. Service on third party products or service made necessary by use of incompatible third party products;  
f. Service made necessary by the simultaneous use of this DAV Product and connected equipment;  
g. Modifications to the DAV Product not approved in writing by TCL, and service made necessary by the  
use or installation of non-Toshiba modifications to the DAV Product;  
ꢀꢁ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
h. Service of a DAV Product on which the TOSHIBA label or logo, rating label or serial number have  
been defaced or removed;  
i. Damage to the DAV Product caused by failure to follow the specifications, User manuals or guides as  
to usage and/or storage.  
j. Firmware updates that are posted to the Toshiba Support website and can be performed by the end  
user  
Disclaimer and Limitation of Remedy  
TO THE EXTENT NOT PRECLUDED BY LAW, ALL OTHER EXPRESS AND IMPLIED WAR-  
RANTIES, CONDITIONS AND REPRESENTATIONS FOR THIS DAV PRODUCT, INCLUDING  
THE IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED AND EXCLUDED. IF THE  
APPLICABLE LAW, STATUTORY OR OTHERWISE, PRECLUDES THE EXCLUSION OF ANY  
IMPLIED WARRANTIES, CONDITIONS AND REPRESENTATIONS THEN SUCH IMPLIED  
WARRANTIES, CONDITIONS AND REPRESENTATIONS ARE OTHERWISE LIMITED IN  
DURATION TO THE TERM OF THIS EXPRESS WRITTEN LIMITED WARRANTY. TO THE  
EXTENT NOT PRECLUDED BY LAW, STATUTORY OR OTHERWISE, THIS WRITTEN  
WARRANTY SUPERCEDES AND SPECIFICALLY DISCLAIMS ANY OTHER WARRANTY,  
CONDITION OR REPRESENTATION NOT STATED IN THIS WARRANTY, WHETHER MADE  
BY TCL, TOSHIBA CORPORATION, THEIR AFFILIATES, ADRs AND ASPs AND WHETHER  
MADE ORALLY OR IN WRITING (INCLUDING ANY STATEMENT IN ANY BROCHURE,  
PRESS RELEASE, ANNOUNCEMENT, ADVERTISEMENT, POINT OF SALE DISPLAY, ETC.).  
YOU MUST READ AND FOLLOW ALL SET-UP AND USAGE INSTRUCTIONS IN THE APPLI-  
CABLE USER GUIDES AND/OR MANUALS. IF YOU FAIL TO DO SO, THIS DAV PRODUCT MAY  
NOT FUNCTION PROPERLY AND YOU MAY SUFFER DAMAGE. THIS WARRANTY WILL NOT  
COVER ANY SERVICE THAT IS REQUIRED, IN PART OR IN WHOLE, AS A RESULT OF ANY  
FAILURE TO FOLLOW THE SET-UP AND USAGE INSTRUCTIONS. THIS WARRANTY DOES  
NOT APPLY AND SHALL BE VOID AND UNENFORCEABLE IF THE DAV PRODUCT IS OPENED,  
SERVICED, OR REPAIRED BY PERSONS OTHER THAN THOSE AUTHORIZED BY TCL TO SER-  
VICE OR REPAIR THE DAV PRODUCT.  
IF THE DAV PRODUCT FAILS TO WORK AS WARRANTED ABOVE, YOUR SOLE AND EX-  
CLUSIVE REMEDY SHALL BE REPAIR OR REPLACEMENT OF THE DEFECTIVE PART. IN NO  
EVENT WILL TCL, TOSHIBA CORPORATION, THEIR AFFILIATES, ADRs OR ASPs (THE "RE-  
LATED PARTIES") BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DAMAGES, MONEY,  
REIMBURSEMENT, COSTS OR EXPENSES. THIS LIMITATION APPLIES TO DAMAGES,  
MONEY, REIMBURSEMENT, COSTS OR EXPENSES OF ANY KIND WHATSOEVER INCLUDING  
ANY DIRECT OR INDIRECT DAMAGES, DAMAGE TO PROPERTY OR PERSON, LOST PROFITS,  
LOST SAVINGS, INCONVENIENCE OR OTHER SPECIAL, INCIDENTAL, EXEMPLARY OR CON-  
SEQUENTIAL DAMAGES, WHETHER FOR BREACH OF WARRANTY, BREACH OF CONTRACT,  
TORT (INCLUDING NEGLIGENCE), UNDER A STATUTE OR UNDER ANY OTHER LAW OR  
FORM OR ACTION, OR WHETHER ARISING OUT OF THE USE OF OR INABILITY TO USE THE  
DAV PRODUCT, EVEN IF ANY OF THE RELATED PARTIES HAS BEEN ADVISED OF THE POS-  
SIBILITY OF SUCH DAMAGES OR OF ANY CLAIM BY ANY OTHER PARTY.  
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of  
these warranties in any manner whatsoever.  
Arbitration and Dispute Resolution  
To the extent not precluded by law, any claim, dispute, controversy or disagreement (whether for breach of  
warranty, breach of contract, tort (including negligence), under a statute or under any other law or form of  
action) against any of the Related Parties arising out of, or otherwise relating to: (i) this warranty; (ii) the  
DAV Product; (iii) any oral or written representations, statements, brochures, press releases, advertising,  
ꢀꢂ  
Download from Www.Somanuals.com. All Manuals Search And Download.  
announcement, point of sale display, or promotional material relating to the DAV Product; (iv) the relation-  
ships that result from this warranty, (the foregoing claims, disputes controversies and disagreements are  
collectively referred to as the "Dispute"), shall be referred to and resolved by final and binding arbitration  
(to the exclusion of the courts). To the extent not precluded by law, you agree to waive any right that you  
may have to commence or participate in any representative or class proceeding against the Related Parties  
relating to any Dispute. If and where applicable and to the extent not precluded by law, you further agree to  
opt out of any such representative or class proceedings. Arbitration of any Dispute will be conducted in the  
forum and in the manner as agreed to between you and TCL. Failing such agreement, the arbitration will  
be conducted by one arbitrator pursuant to the laws and rules relating to arbitration generally in force in  
the jurisdiction in which you reside at the time that the Dispute arises. To the extent not precluded by law,  
no claim, dispute, controversy or disagreement of any other person may be joined or combined with any  
Dispute by you, without the prior written consent of TCL.  
Critical Applications  
The DAV Product you have purchased is not designed for any “critical applications.” “Critical applications”  
means life support systems, medical applications, connections to implanted medical devices, commercial  
transportation, nuclear facilities or systems or any other applications where DAV Product failure could lead  
to injury to persons or loss of life or catastrophic property damage.  
IF THE CUSTOMER USES THE DAV PRODUCT IN ANY CRITICAL APPLICATION, THE CUSTOM-  
ER – AND NOT TCL, ITS AFFILIATES, ADRs OR ASPs – ASSUME SOLE AND FULL RESPONSIBIL-  
ITY FOR SUCH USE. TCL RESERVES THE RIGHT TO REFUSE TO SERVICE ANY DAV PRODUCT  
USED IN A CRITICAL APPLICATION. TCL, ITS AFFILIATES, ADRs AND ASPs HEREBY DIS-  
CLAIM ANY AND ALL LIABILITY, DAMAGES AND CONSEQUENCES ARISING OUT OF THE  
SERVICE OR REFUSAL TO SERVICE SUCH DAV PRODUCT AND FURTHER DISCLAIM ANY AND  
ALL LIABILITY, CONSEQUENCES AND DAMAGES THAT MAY ARISE OR RESULT FROM THE  
USE OF THE DAV PRODUCT IN ANY CRITICAL APPLICATIONS.  
General Provisions  
If and to the extent that any provision of this limited warranty should generally be found to be unenforce-  
able, the unenforceable provision shall be severed from the warranty and deemed not to form part of the  
warranty. The remaining provisions of this warranty shall be and remain valid and enforceable. If and to  
the extent that any provision of this limited warranty as it relates to any of the Related Parties is found  
to be invalid or unenforceable in respect of that party (the "Excluded Party"), the Excluded Party shall be  
deemed to be severed or excluded from the provision, and the provision shall remain valid, enforceable and  
applicable in respect of the other or remaining Related Parties.  
To the extent permitted by law, this limited warranty shall be governed and construed in accordance with  
the laws of Ontario.  
If there is any inconsistency between this limited warranty, on the one hand, and any statement in the pack-  
aging of the DAV Product or in any other document enclosed with, or used in the context of the promotion  
or sale of, the DAV Product, on the other hand, the provisions of this limited warranty shall prevail.  
▪ How to Obtain Warranty Services  
If, after following all of the operating instructions in this manual, checked the "Troubleshooting" section,  
and have visited www.toshiba.ca/support for additional information, you find that service is needed, please  
contact TCL Customer Support toll free at 1 800 268-3404.  
ꢀꢃ  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Toshiba Telephone Strata DKT User Manual
Tripp Lite Computer Accessories N54901K User Manual
Uniden Digital Camera UDC 5M User Manual
Uniden Scanner BC245XLT User Manual
Univex CD Player DXZ775USB User Manual
Univex CRT Television 21PT6441 User Manual
ViewSonic Flat Panel Television VS12120 1M User Manual
Viking Ventilation Hood F20039C User Manual
Vizio Blu ray Player VBR100 User Manual
Wagner SprayTech Power Roller PaintMate User Manual