Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
FEATURES
Toshiba America Consumer Products Inc. takes pride in presenting the
cordless telephone and digital answering system. An all digital
answering device provides many new conveniences not available on
tape machines, such as repeat, skip and individual message delete.
•900MHz analog transmission with
extended talk range
•40 channel auto scanning
•All digital recording system
(approx. 15min. recording time)
TALK
B
A
T
T
L
O
W
•Advanced compandor noise
reduction
•Advanced message management
design
•Voice guidance/time stamp
•Long standby battery life (14 days)
•One way page/handset locator
•Last number redial (32 digits)
•10 speed-dial 16 digits each
•Mute on handset
•Any-key answer
•Reversible charging system
•Hearing aid compatible/HAC volume
•Desk/Wall mountable
(bracket included)
•Custom greeting message /
pre-recorded greeting message
•Memo recording
•Volume control (3 level)
•Digital security code (65,536 codes)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Preparation
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . .6
LOCATION OF CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Base unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Setting up the base unit (Desk top mounting) . . . . . . . . . . . . . . . . .10
AC adaptor information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Setting up the base unit (Wall mounting) . . . . . . . . . . . . . . . . . . . . .11
Charging the battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Setting the dial mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Basics
BASIC OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Making a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Receiving a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Redial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Out of range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Handset earpiece volume setting . . . . . . . . . . . . . . . . . . . . . . . . . .16
Handset ringer volume setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Base speaker volume setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Tone/Entering a pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Interference or static . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Paging the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
MEMORY DIALING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Storing numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Inserting a pause in memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Dialing a stored number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Answering system
USING THE MENU MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Recording the greeting message . . . . . . . . . . . . . . . . . . . . . . . . . . .21
To change the greeting message . . . . . . . . . . . . . . . . . . . . . . . . . .21
Setting the clook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Setting the security code (PIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Setting the base ringer volume . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Setting the number of rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Setting the recording time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
USING THE ANSWERING MACHINE . . . . . . . . . . . . . . . . . . . . . . . . .25
Turning the answering machine ON & OFF . . . . . . . . . . . . . . . . . . .25
Checking and switching greeting message . . . . . . . . . . . . . . . . . . .25
Checking clock setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Playing recorded messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Deleting recorded message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Screening incomming calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Leaving a memo message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Recording a phone conversation (2WAY REC) . . . . . . . . . . . . . . . .28
Calling in from a remote location . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Table of commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Additional information
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
WARRANTY/SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
WALL MOUNT TEMPLATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
REMOTE OPERATION CARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment,
basic safety precautions should always
be followed to reduce the risk of fire,
electric shock and injury.
9 Never push objects of any kind into
this product through cabinet slots as
they may touch dangerous voltage
points or short out parts that could
result in a risk of fire or electric shock.
Never spill liquid of any kind on the
product.
1 Read and understand all instructions.
2 Follow all warnings and instructions
marked on the product.
10 Do not disassemble this product.
Opening or removing covers puts you
at risk of electrical shock, and incorrect
reassembly can cause shocks, sparks
or other damage during subsequent
use.
3 Unplug this product from the wall
outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners.
Use a dry cloth for cleaning.
4 Do not use this product near water
sources, such as bath tubs, wash
bowls, kitchen sinks, laundry tubs, wet
basements, or swimming pools.
11 Take this product to a qualified service
technician under any of the following
conditions:
5 Do not place this product on an
unstable cart, stand, or table. The
telephone may fall, causing serious
damage to the telephone.
A. When the power supply cord is
damaged or frayed.
B. If liquid has been spilled into the
product.
6 Slots and openings in the cabinet and
the back or bottom are provided for
ventilation. To protect it from
C. If the product has been exposed to
rain or water.
D. If the product does not operate
normally according to the operating
instructions. Adjust only those
controls covered by this manual.
Improper adjustment of other
controls may result in serious
damage to the unit or your home.
E. If the product has been dropped or
the cabinet has been damaged.
F. If the product exhibits a distinct
change in performance.
overheating, these openings must not
be blocked or covered. The openings
should never be blocked by placing
the product on a bed, sofa, rug, or
other similar surface. This product
should never be placed near or over a
radiator or heat register. This product
should not be placed in a built-in
installation unless proper ventilation is
provided.
7 Do not allow anything to rest on the
power cord. Do not locate this product
where the cord can be stepped on or
tripped over.
12 Do not use the telephone in the
vicinity of a gas leak.
8 Do not overload wall outlets and
extension cords as this can result in
the risk of fire or electric shock.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
The RBRCTM Seal
The RBRCTM Seal on the (easily removable) nickel-cadmium battery
(contained in our product) indicates that Toshiba America Consumer
Products, Inc. (TACP) is voluntarily participating in an industry program
to collect and recycle these batteries at the end of their useful lives,
when taken out of service within the United States. The RBRCTM
program provides a convenient alternative to placing used nickel-
cadmium batteries into the trash or municipal waste, which is illegal in some areas.
TACP’s payments to RBRCTM make it easy for you to drop off the spent battery at
local retailers of replacement nickel-cadmium batteries, or at authorized TACP product
service centers. You may also contact your local recycling center for information on
where to return the spent battery. Please call 1-800-8-BATTER for information on Ni-
Cd battery recycling in your area. TACP’s involvement in this program is part of its
commitment to protecting our environment and conserving natural resources.
RBRCTM is a trademark of Rechargeable Battery Recycling Corporation.
CAUTION: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS BY THE
BATTERY, READ AND FOLLOW THESE INSTRUCTIONS.
4 Exercise care in handling the
batteries. Contact with conductive
materials such as rings, bracelets and
BATTERIES
keys may cause the battery to short
out, resulting in overheating which
could burn.
1 Use only the appropriate type and
size battery pack specified in the
instruction manual provided for this
5 Charge the battery pack provided with
or identified for use with this product
only in accordance with the
product.
2 Do not dispose of the battery pack in
a fire. The cell may explode. Check
with State and local codes for
instructions and limitations specified
in the instruction manual provided for
this product.
possible special disposal instructions.
3 Do not open or mutilate the battery
pack. Released electrolytes are
corrosive and may cause damage to
the eyes or skin. It may be toxic if
swallowed.
6 Observe proper polarity orientation
between the battery pack and the
battery charger.
ATTENTION: THE PRODUCT THAT YOU HAVE PURCHASED CONTAINS A
RECHARGEABLE BATTERY. UNDER VARIOUS STATE AND LOCAL LAWS, IT MAY
BE ILLEGAL TO DISPOSE OF THIS BATTERY INTO THE MUNICIPAL WASTE
STREAM. PLEASE CHECK WITH YOUR LOCAL GOVERNMENT FOR DETAILS IN
YOUR AREA REGARDING RECYCLING OPTIONS OR PROPER DISPOSAL.
SAVE THESE INSTRUCTIONS
TO HELP PROTECT THE ENVIRONMENT, THIS PRODUCT MAY CONTAIN
RECYCLED OR RECONDITIONED PARTS AND MATERIALS.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
HANDSET
Antenna
Speed Dial Index Card (back)
Write down numbers stored in
memory
TALK/BATT LOW LED
T
A
L
L
K
W
B
A
T
T
O
RDL/P
(Redial/Pause) button
(page 16, 17)
FLASH
T
ALK
RDL/P
TALK
button (page 15)
button (page 14, 16)
FLASH
1
4
ABC2
JKL 5
TUV 8
OPER0
DEF
3
G
HI
MNO
6
P
R
Q
S
7
W
Y
X
Z
9
TO
NE
TONE
/TONE MODE button
#
M
EM
#
/PULSE MODE button (page 14)
(page 14, 17)
MEM
(page 18)
MUTE
VO
L/R
ING
CH
VOL/RING
button (page 16)
Battery Compartment (page 12)
(Memory) button
MUTE
button (page 17)
CH
Charging Contacts
(Channel) button (page 17)
SUPPLIED ACCESSORIES:
Modular Line Cord
Part # RC008231
Wall Mount Bracket
Part # RC009245
AC Adaptor
TAC-8930
Part # RC009255
8
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION OF CONTROLS
BASE UNIT
DC IN 9v jack (page 10)
LINE modular jack (page 10)
PAGE
button (page 17)
Antenna
ANSWER
(page 25), ANSWER
LED
button
POWER LED
IN USE LED
CHARGE LED
Speaker
MENU
(page 20 to 24)
button
P
O
W
E
R
I
N
U
S
E
C
H
P
A
A
R
G
G
E
E
M
E
N
U
R
O
M
E
E
C
A
M
SET
(page 20 to 24)
/2
W
button
S
E
Y
T
REC MEMO/2WAY
button (page 21, 28)
S
E
L
E
C
T
W
E
R
V
O
L
U
G
M
VOLUME
R
E
E
buttons (page 20 to26)
E
T
IN
G
S
E
F
F
L
E
C
T
M
IC
T
IM
SKIP FF
SELECT
E
button (page 26)
/
TIME
button (page 26)
PLAY/STOP
button (page 26)
SELECT
REW REPEAT
button (page 20 to 26)
/
DELETE
button (page 26, 27)
GREETING button (page 25)
Microphone
For purchase of accessories, please call 1-877-644-7373.
Owner's manual
Part # RC009793
SPEED DIAL INDEX
1
3
5
7
9
2
4
6
8
0
Quick Reference Guide
Part # RC009794
Speed Dial Index Card
Part # RC005157
Rechargeable Battery Pack
Toshiba TRB-8000
Part # RC004931
9
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
SETTING UP THE BASE UNIT (DESK TOP MOUNTING)
For setting up the base unit follow the instructions below.
Raise the
antenna to a
vertical position.
Single-Line
Telephone Jack
(RJ11C)
Fasten the AC adaptor
cord to prevent it from
being disconnected.
Telephone Line Cord
Power Outlet
(AC 120V, 60Hz)
AC Adaptor
• Plug the AC adaptor firmly into the base unit and the AC 120V outlet.
• USE ONLY WITH Supplied AC ADAPTOR (TAC-8930 power source
AC 120V 60Hz/DC9V).
• The AC adapter must remain connected at all times.
(It is normal for the adaptor to feel warm during use.)
AC ADAPTOR INFORMATION
Use only the supplied AC adaptor, or
one matching its specifications exactly
with this product. Incorrect voltage may
damage the unit or cause it to function
improperly.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
SETTING UP THE BASE UNIT (WALL MOUNTING)
MOUNTING ON A STANDARD WALL PLATE:
Insert the bracket’s tabs into the
notches on the base.
Flip the switch hook tab
Raise the antenna.
over so the tab holds the
handset.
Single-Line
Telephone Jack
(RJ11C)
Telephone
Line Cord
Power Outlet
(AC 120V, 60Hz)
AC Adaptor
• Route the cords through the guides.
• Place the base unit on the posts of the wall plate and push down until it is
firmly seated.
• USE ONLY WITH Supplied AC ADAPTOR (TAC-8930 power source AC
120V, 60 Hz/DC 9V).
NOTES:
• Do not use any outlet controlled by a wall switch.
• If you don’t have a standard wall plate, cut out the template on this page and
use it to position two screws (minimum length of 13/8 inches) into the wall
with the heads protruding about 1/4 inch.
CUT
CUT
Wall mount template
IMPORTANT:
•
Before mounting, select a wall area of sufficient
strength. If mounting on wallboard or in an area
of questionable strength, locate
maximum support of your telephone.
a
stud for
•
Avoid electrical cables, pipes, or other items
behind the mounting location that could cause a
hazard.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
CHARGING THE BATTERY PACK
It is important to charge the battery for 12 to 16 hours
continuously without any interruption before you use the handset
for the first time.
1
Remove the battery cover on the
back of the handset by sliding it
down.
Red
Black
2
Plug the battery pack cord into the
connector with the correct polarity.
(black and red wires).
3
4
Place the battery pack in the battery
compartment.
Put the battery cover back by
sliding until it snaps into place.
Make sure not to get the wires of
the battery pack caught in the
cover.
TALK/BATT LOW
LED
T
ATT LOW
B
A
L
K
5
Place the handset on the base unit.
Be sure the CHARGE LED lights.
POWER If the CHARGE LED does not light,
LED
make sure the AC adaptor is
plugged in securely.
CHARGE
LED
Charging contacts
NOTES:
• Use only the supplied battery pack (TRB-8000 power source 600mAh, 3.6VDC)
• The battery pack is not charged properly if the charging contacts are dirty or
tarnished. Clean the contacts occasionally with a dry cloth.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
After the battery pack is fully charged;
Operation
Approx. battery life
up to 7 hours
While in use (Talk mode)
While not in use (Standby mode)
up to 14 days
When the TALK/BATT LOW LED blinks, all handset buttons are
disabled and the battery needs to be charged. If this occurs during a
call, you hear short beeps. Finish the call as soon as possible and
place the handset on the base unit.
NOTES:
• If a call comes in when the battery is too low to operate properly, you will be
unable to answer the call or the call will be disconnected.
• The redial memory numbers backup for up to one minute while you replace
the battery pack.
• If you must replace the battery pack during a telephone call, complete the
replacement of the battery pack within 30 seconds, and you can return to the
original call.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
INSTALLATION
Before using the handset, make sure to read the following instructions.
FLASH
TONE/
SETTING THE DIAL MODE
Depending on your dialing system, set the mode as follows:
1
2
Press and hold
until you hear a confirmation tone.
FLASH
To set the dial mode for pulse dialing, press
mode for tone dialing press TONE/
A confirmation tone sounds to indicate the setting is complete.
Or to set the dial
.
.
Note:
Most phone systems use tone dialing.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
Before using the handset, make sure to read the following instructions.
RDL/P
FLASH
(Redial/Pause)
TALK
TONE/
VOL/RING
CH
MUTE
MAKING A CALL
Handset On The Base
Handset Off The Base
TALK
1) Pick up the handset.
TALK
1) Press
.
2) Press
.
2) Listen fot the dial tone.
3) Dial the number.
3) Listen for the dial tone.
4) Dial the number.
TALK
To hang up: Press
, or return the handset to the base (Auto Standby).
RECIEVING A CALL
Handset On The Base
Handset Off The Base
Pick up the handset (Auto Talk).
Press any button (Any-key answer).
TALK
To hang up: Press
, or return the handset to the base (Auto Standby).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
REDIAL
Handset On The Base
Handset Off The Base
TALK
TALK
1) Pick up the handset and press
2) Listen for the dial tone.
.
1) Press
.
2) Listen for the dial tone.
3) Press RDL/P .
RDL/P
3) Press
.
OUT OF RANGE
During a call, as you begin to move too far from the base unit, the
noise increases. Then, you should move close to the base unit. If you
travel out-of-range, your call terminates.(See page 17 “Interference or
static”)
CALL WAITING
To use this feature, you must subscribe to the Call Waiting Service.
1
2
When you hear a call-waiting tone during your conversation on the
FLASH
phone, simply press
.
FLASH
To return to the first caller, press
again.
NOTE:
Pressing
without receiving a Call Waiting signal may disconnect the
FLASH
current caller.
HANDSET EARPIECE VOLUME SETTING
VOL/RING
To adjust the earpiece volume, press
during a call.
HANDSET RINGER VOLUME SETTING
VOL/RING
To adjust the ringer volume, press
during standby mode.
NOTE:
When the handset is on the base, the handset ringer volume is disabled
.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC OPERATION
BASE SPEAKER VOLUME SETTING
VOLUME/+
VOLUME/–
To adjust the base unit speaker volume, press
while speaking.
or
MUTE
MUTE
To mute a conversation, press
during a conversation.
TALK
MUTE
To resume normal conversation, press
or
.
TONE/ENTERING A PAUSE
To
Do this
TONE/
To temporarily switch to tone dial
Press
. The following numbers
(When the base is set to pulse mode)
will be sent as tone dialing (See page 14).
To enter a pause within the dialing
sequence
Press RDL/P (See page 19).
INTERFERENCE OR STATIC
CH
If you hear noise during a call, press
to select another channel.
The TALK/BATT LOW LED blinks while changing a channel.
PAGING THE HANDSET
To locate the handset while it is off the
PAGE
base, press
. The handset
beeps for 60 seconds.
PAGE
To stop paging, press
or any
PAGE
key at the handset, or return the
handset to the base unit.
NOTE:
You cannot page the handset during a call.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING
You can store up to 10 telephone numbers in the memory.
NOTES:
• Always press a button within 20 seconds or the phone will return to standby.
• If you press a wrong button, an error tone sounds and the handset returns to
standby mode.
• If you receive an incoming call or a pager call from the base unit during the
operation, the operation will be cancelled.
TALK
(Redial/Pause)
RDL/P
MEM (Memory)
STORING NUMBERS
You can store up to 16 digits including #, , and PAUSE as a
telephone number.
MEM
1
2
3
Pick up the handset and press
.
Dial the telephone number you wish to store (up to 16 digits)
MEM
Press
18
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMORY DIALING
4
Enter the memory address (0 to 9) at which you wish to store the
phone number stored in step 3.
You will hear a long beep when the number is successfully stored.
To store more telephone number, repeat steps 1 to 4.
5
6
Return the handset to the base unit.
Record the telephone numbers on the SPEED DIAL INDEX CARD,
and place it on the back of the handset.
EXAMPLE: To store 9012345 in memory address 3
MEM
MEM
0
1
2
3
4
5
3
9
Replacing a telephone number
Just store the new number following the same steps in “STORING
NUMBERS.”
The new number will replace the previously stored one.
INSERTING A PAUSE IN MEMORY
Use
(redial/pause) to make an outgoing call through a PBX or
RDL/P
long distance. Each time you press RDL/P , a pause of about two
seconds is inserted during the dialing sequence. If more than two
seconds are needed, press
twice.
RDL/P
EXAMPLE: To store “0 PAUSE 1234567890” in memory address 4,
press:
MEM
9
MEM
0
1
2
3
4
5
6
7
8
0
4
RDL/P
DIALING A STORED NUMBER
TALK
1
2
3
Pick up the handset and press
Press the
.
.
MEM
Press the memory location number (0-9).
The stored number will be dialed.
NOTE:
If you enter a memory address which does not have any stored number, error
beeps sound.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MENU MODE
Menu mode allows you to setting following Answering System
functions.
REC MEMO/2WAY
MENU
SET
VOLUME/+
VOLUME/–
SELECT
SELECT
REW REPEAT SELECT
SKIP FF
SELECT
/
/
LED display
PLAY/STOP
TIME
DELETE
GREETING
Menu No. Function
LED display
-- --
Menu1
Menu2
Menu3
Menu4
Menu5
Menu6
Standby
Greeting message
Clock
[
[
[
[
[
[
] - [ ], [ ], [
] - [
]
Security code (PIN)
Ringer volume
Ring time
]
], [ ], [
]
], [ ], [ ], [
]
Recording time
Return to standby
], [ ], [
] - [
]
]
NOTES:
• If you make no entries within 20 seconds, or 20 seconds pass after a voice
prompt/guidance or greeting, you will hear a long beep and the answering
machine return to standby. Note that time out for clock setting is 2 minutes.
• Receiving a call or pressing talk will cancel setting. If you press PLAY/STOP ,
the setting is canceled and return to standby.
MENU
• You can scroll to the next menu option by pressing
• You can use or to adjust the
.
VOLUME/+
VOLUME/–
announcement volume level during voice prompt/guidance.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MENU MODE
RECORDING THE GREETING MESSAGE
You can record a personalized greeting message (up to 30 seconds)
or use the pre-recorded message. When a call is received, the
answering machine answers the call and plays the greeting message.
MENU
1
2
Press
once.
You hear the pre-recorded message or current greeting
message.
Press
and you will hear the guidance.
REC MEMO/2WAY
Start to record your message.
For example:
“I can not come to the phone right now. Please leave a
message after the tone”.
3
To finish recording your message, press
or
REC MEMO/2WAY
PLAY/STOP
.
You hear a long beep and your greeting plays back.
NOTE:
You can delete your greeting message by pressing
after step 1.
DELETE
TO CHANGE THE GREETING MESSAGE
You can change between the pre-recorded greeting message and your
own recorded greeting message.
1
Press GREETING .
The current greeting message will be played.
2
3
Press
Press
or
to change to the other.
SELECT
SELECT
PLAY/STOP
to exit the system.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MENU MODE
SETTING THE CLOCK
The answering machine announces the day and time that each
message was recorded during a play back.
MENU
1
2
Press
twice.
The system announces the current time.
Press
.
SET
You hear the current day and the LED display shows the
numbers [ ] through [ ].
SELECT
3
Press
SELECT
or
until the correct day is
announced.
4
5
Press
Press
.
SET
SELECT
or
SELECT
until you hear the correct hour
setting. The LED display shows the numbers [ ] through
[
] as each hour is announced.
6
7
Press
Press
.
SET
SELECT
or
SELECT
until you hear the correct
minute setting. The LED display shows the numbers [
through [ ] as each minute is announced.
]
8
9
Press
Press
.
SET
SELECT
or
SELECT
until you hear AM or PM.
The LED display shows [ ] or [ ].
10
Press
.
SET
The answering machine announces the time that you
have set.
NOTE:
• You can hear the time currently set by pressing
TIME
.
• If you do not complete the setting procedure within 2 minutes, the setting
precedure is cancelled.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE MENU MODE
SETTING THE SECURITY CODE (PIN)
To access to your answering machine when you are away from home,
you need to identify yourself with a security code or Personal
Identification Number (PIN). You can select any two digit number
between 00 and 99 as your security code (PIN).
MENU
1
Press
three times.
You hear the current the current setting, and the LED display
shows the current security code (PIN).
2
3
4
Press
to change the security code (PIN). The system
SET
announces current security code (PIN).
SELECT
or
SELECT
until the desired number
Press
appears.
Press
to set the security code (PIN).
SET
The answering machine announces new security code (PIN).
SETTING THE BASE RINGER VOLUME
Select one of three ringer volume setting (
: High,
: Low,
: off).
MENU
1
Press
four times.
You hear the current ringer volume, and the LED display
shows the ringer volume.
SET
2
3
Press
Press
.
SELECT
SELECT
or
: High,
until the desired ringer volume
: Low, : off)
appears.(
SET
4
Press
to set the ringer volume.
The system announces the ringer volume that you have set.
NOTE:
If the base ringer is set to off, and the handset is on the base, both the base
and handset ringer is disabled.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
USING MENU MODE
SETTING THE NUMBER OF RINGS
Select one of four ring time setting ( : 2rings, : 4rings, :6rings,
: Toll server).
MENU
1
Press
five times.
The current ring time is displayed on the LED display.
2
3
Press
Press
to change the ring time.
SET
SELECT
SELECT
or
or until the desired ring time
appears. ( : 2rings, : 4rings, :6rings,
: Toll Server)
SET
4
Press
to set the new ring time.
The answering machine announces the ring time that you
have set.
TS (TOLL SAVER MODE): The phone answers at the second ring
when there are new messages, and the fourth ring when there are no
new messages.
When you check the message from the outside phone, hang up if you
hear the third ring to save the toll charge.
SETTING THE RECORDING TIME
Select one of two maximum recording times or Announce Only ( : 1
minute, : 4 minutes, : Announce only).
MENU
1
Press
six times.
The LED display shows the current recording time.
2
3
Press SET to change the recording time.
SELECT
SELECT
Press
or
until the desired time appears.
(
: 1 minute, : 4 minutes, : Announce only).
4
Press SET to set the new recording time.
The system announces the recording time that you have set.
A (Announce Only): If you set the recording time to A, the selected
greeting message will be announced and no incoming message will be
accepted. The LED display shows " ".
24
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE ANSWERING MACHINE
VOLUME/+
REW REPEAT SELECT
VOLUME/–
/
ANSWER
LED display
DELETE
SKIP FF SELECT
/
PLAY/STOP
GREETING
TIME
TURNING THE ANSWERING MACHINE ON & OFF
ANSWER
Press
to turn the answering machine on. The ANSWER LED
will light, and the number of messages appears on the LED display. The
greeting message will be played and you hear a long beep.
ANSWER
To turn off the answering machine, press
off.
. The LED display turns
NOTE:
If the message storage area is full, the LED display shows "
" and the
system announces "No remaining time" after the greeting message. You
should delete messages (see page 27). Or, the system cannot record any
message.
CHECKING AND SWITCHING GREETING MESSAGE
You can check the message and switch from the Pre-recorded
message to the user greeting message.
GREETING
1
2
3
Press
.
The current greeting message will be played.
SELECT
or
SELECT
to switch the greeting message, and
Press
the greeting message will be announced.
PLAY/STOP
Press
to exit the system.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE ANSWERING MACHINE
CHECKING CLOCK SETTING
You can check the time (day, hour, minute, AM, and PM) by using the
Time stamp.
TIME
To check the time, press
. The time will be announced.
PLAYING RECORDED MESSAGES
The display shows the total number of recorded messages.
If new messages have been recorded, the number blinks.
To listen to the messages, press PLAY/STOP . Messages will be played
in the order they were received. During playback, see the table below
for more operation.
PLAY/STOP
To playback the message
Press
Press
.
REW REPEAT
To repeat the previous message
(within 2 seconds
after the beginning of message).
REW REPEAT
To repeat the current message
Press
(after 2 seconds
after the beginning of message).
SKIP FF
To skip the message
Press
.
REW REPEAT
To rewind the message in double
speed.
Press and hold
.
SKIP FF
To play back the message in
double speed
Press and hold
.
DELETE
To delete a message
Press
during playback of the
message you want to delete.
PLAY/STOP
To stop playback
Press
.
To delete all messages
Finish the playback of all messages.
DELETE
Then, press and hold
beep sounds.
till a
To adjust the speaker volume
(0-9)
Press VOLUME/+ or VOLUME/–
repeatedly.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE ANSWERING MACHINE
DELETING RECORDED MESSAGES
To delete all messages:
Press and hold
messages.
DELETE
till a beep sounds after playback of all
If there are messages that you have not listened to, an errer tone
sounds and the messages will not be deleted.
To delete individual messages:
While playing back the message you want to delete, press
.
DELETE
The message is deleted and the next message will be played.
NOTE: To maintain maximum record time, it is a good idea to delete the old
messages.
SCREENING INCOMING CALLS
You can screen calls when the answering machine is on.
1
2
After the answering machine answers, the base speaker lets you
hear the caller as the machine records the message.
To answer the call immediately, simply pick up the handset or
press
if the handset is away from the base. The answering
TALK
machine will disconnect automatically.
NOTE: If the speaker volume is set to 0, you can not use the screening calls feature.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE ANSWERING MACHINE
LEAVING A MEMO MESSAGE
You can use the base unit to record a memo (up to 10 minutes), as a
reminder to yourself or as a message for someone else in the
household. A memo is stored and played back like any other incoming
message, and the LED display will blink to indicate that a message
has been received.
1
Press and hold
till a beep sounds.
REC MEMO/2WAY
You hear “Record your message after the tone” and a long beep.
2
3
Begin speaking close to the microphone.
When you finish recording, press
or PLAY/STOP .
REC MEMO/2WAY
RECORDING A PHONE CONVERSATION (2WAY REC)
You can record a telephone conversation that is already in progress
with the handset (up to 10 minutes). The conversation is stored and
played back like an incoming message.
1
2
During a call with the handset, press and hold
beep sounds. Recording starts and both parties hear the
intermittent beeps.
till a
REC MEMO/2WAY
To stop recording, press
You hear a long beep.
or PLAY/STOP .
REC MEMO/2WAY
FLASH
NOTE: When recording a conversation, all handset keys, except
are
disabled. Stop recording if you need to use any other handset keys.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE ANSWERING MACHINE
CALLING IN FROM A REMOTE LOCATION
You can retrieve messages or change answering machine settings by
calling your phone from a touch-tone phone. Even if the answering
machine has been left off, you can still access it by turning it on first.
1
IF THE ANSWERING MACHINE IS OFF:
Let the phone ring at least 10 times. The line will connect and you
#
will hear several short beeps. Press
code (PIN).
and enter your security
IF THE ANSWERING MACHINE IS ON:
After playing your greeting message, press
security code (PIN).
#
and enter your
2
3
The answering machine announces the number of new and old
messages. The unit automatically starts playing the Help guidance.
#
Press
and the appropriate number button that corresponds to
the operation you want (see TABLE OF COMMANDS on next
page).
#
5
4
When you have finished, press
system.
and
or hang up to exit the
NOTES:
• When entering your security code (PIN), the second digit must be entered
within 2 seconds after the first one.
• If you enter a wrong security code (PIN) 3 times, the line will be
disconnected.
• Enter the command within 15 seconds while you hear intermittent beeps.
Otherwise, the line is disconnected.
• When you call your phone while the message storage area is full, you will
#
hear several short beeps after the 10th ring. Enter
(PIN), then you can continue to enter the commands.
and your security code
• During a operation from a remote location, [
], appears on the LED display.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
USING THE ANSWERING MACHINE
TABLE OF COMMANDS
OPERATION
Press
Remarks
#
To repeat an incoming message;
(during playback)
1
Enter the command within 4
seconds after the beginning of
the message to repeat the
previous message, and after 4
seconds to repeat the current
message.
#
2
To playback an incoming message
(up to 4 minutes)
For longer playback,
#
2
press
at the end of
the message.
#
#
To skip to the next message
(during playback)
3
4
To delete individual messages
(during playback)
#
#
#
To stop operation
5
6
7
To turn the answering system on
To record a memo message
(up to 4 minutes)
After you finish recording a
memo message, press
#
#
#
7
#
5
#
7
To stop recording
5 or
or
.
#
8
To record your greeting message
After you finish recording your
greeting message, press
#
9
0
#
#
8
8
To stop recording
5 or
5 or
.
#
#
To turn the answering system off
To play Help Guidance
For your handy reference guide, cut out the remote operation cards on
page 35.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
Should any problem occur with the unit, use the following simple tests to determine
whether or not servicing is required.
PROBLEM
SOLUTION
The handset battery
pack does not charge.
• The charging contacts of the handset and base are not clean.
→ Clean them with a dry cloth.
• The battery is not connected with correct polarity.
→ Install the battery pack correctly.
• The battery is several years old.
→ Replace with a new battery.
Battery pack becomes
low quickly.
• The battery was not fully charged at the initial charging.
→ Charge the battery for 12 to 16 hours without any
interruption.
• The battery is several years old.
→ Replace with a new battery.
Can not make or
receive calls
Can not hear dial tone.
• The AC adaptor of the base unit is disconnected.
→ Plug the AC adaptor into the base unit and the AC 120V
outlet.
• The battery is low.
→ Place the handset on the base unit to recharge.
• Telephone line cord is disconnected.
→ Check both ends of the telephone jack.
• The previous call was not disconnected.
TALK
→ Press
to disconnect the line.
• Trouble with the telephone line.
→ Check an extension line.
• Outlet used is controlled by a wall switch in its OFF position.
→ Relocate it to another outlet.
• The handset is too far from the base unit.
→ Bring the handset near the base unit.
• Dial setting needs to be changed
FLASH
→ Press and hold
key then choose the appropriate
setting.
Low battery blinks on
the display.
• The battery is low.
→ Return the handset to the base.
The handset does not
ring or receive a page.
• The handset is located away from the base or the battery has
been discharged.
→ Return the handset to charge when finished your call.
• The digital security code is changed.
→ Remove the handset from the base unit and press and
PAGE
hold
. While the handset is emitting, return the
handset to the base unit.
• The battery is low.
→ Place the handset on the base unit to recharge.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING
PROBLEM
SOLUTION
The handset does not
ring when it is on the
base.
• Ringer Volume setting is OFF position.
→ Set the Ringe Volume to Hi or Lo
• The charging contacts of the handset and the base are not
clean.
→ Clean them with a dry cloth.
• The battery is several years old.
→ Replace with a new battery.
CHARGE LED will not
light when the handset
is placed on the base.
• The charging contacts of the handset and the base are not
clean.
→ Clean them with a dry cloth.
• The AC adaptor of the base unit is disconnected.
→ Plug the AC adaptor firmly into the base unit and AC 120V
outlet.
• The handset is not on the base.
→ Place the handset on the base properly
Noise or interference.
• The handset is too far from the base unit.
→ Bring the handset near the base unit.
• The battery is low.
→ Place the handset on the base unit to recharge.
• The base unit is located in a place with high interference.
→ Relocate to another outlet.
• Interference from TV, Microwave oven, computer and
electrical appliances.
CH
→ Press
to select a clearer channel, or relocate the
base unit.
• Excessive line noise.
→ Check with another telephone.
• The volume control is set too high.
→ Reduce volume to a lower setting.
• The base antenna is not in a vertical position.
→ Lift the antenna to a vertical position.
• The phone needs to be reset.
→ Disconnect the AC adaptor and reconnect it to within
few seconds.
The unit does not
operate properly.
When the handset is
returned to the base
unit with the volume
level set at High, a
momentary squeal or
howling sound may
sometimes be heard.
• This is normal.
→ It may be prevented by changing the volume setting to
Medium or Low before returning the handset to the base
unit
32
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY/SERVICE
PROBLEM
SOLUTION
The answering
machine does not
answer the call.
• The recording capacity is full.
→ Delete the unnecessary message.
Aanswering machine
does not play.
• No message is recorded.
→ This is normal.
The messages are not
recorded/incomplete.
• The message was too long or too short.
→ The message should not be longer than the recording
time (1 or 4 minutes), or shorter than 2 seconds.
• The recording capacity became full.
→ Delete recorded messages.
• The phone was answered during recording.
• The recording time is set to A (announce only).
→ Set the REC TIME to 1 or 4 minute setting.
• You are not calling from a touch tone phone.
→ Call from a touch tone phone.
The answering
machine does not
respond to remote
operation.
• The security code (PIN) you entered was wrong.
→ Make sure you entered the correct security code (PIN).
→ If the answering machine is turned off, the phone will
answer and the greeting message will be played after 10
#
rings. After you hear several short beeps, enter
your security code (PIN).
and
The LED display shows
•
This is normal. The recording time is set to A (announce only).
→ Set the REC TIME to 1 or 4 minute setting.
"A" (Announce only)
.
Can not delete
messages.
• There is a message has not been played.
→ Play the new message then delete message.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY/SERVICE
SERVICE REQUIREMENTS
If the cordless telephone should malfunction, or need changes or modifications, all
repairs will be performed by an authorized Toshiba Service Station. This unit has been
registered with the FCC for direct connection to the telephone network. Under the
FCC program, no customer is authorized to repair this unit. This applies to units either
in or out of warranty. If an unauthorized repair is performed, the registration of the unit
for direct connection to the network will be null and void. If the unit is still in warranty,
the remainder of the warranty period will also be null and void.
It is the responsibility of users requiring service to report the need for service to the Toshiba
dealer.
IMPORTANT INSTRUCTIONS TO USERS
Your telephone equipment has been designed and constructed to conform to federal
regulations and can be connected to the phone line as described in this manual.
Please note that each product connected to the telephone line places a certain load
on the line. We designate this as the unit’s “Ringer Equivalence Number.”
It is most unlikely, but...If your telephone equipment should cause problems on the
phone line, the phone company has the right to temporarily discontinue your service. If
this happens, the phone company will notify you and give you the opportunity to
correct the problem. Also, you need to know that the phone company does have the
right to make changes in their lines and/or equipment.
If these changes might affect your telephone equipment (or require changes in the
telephone equipment or its connection), the phone company will notify you in writing,
so you have the chance to take whatever action necessary to ensure uninterrupted
phone service.
FCC REQUIREMENTS
You are no longer required by the FCC to notify your local telephone company of your
intent to connect a new telephone. Your local telephone company may call you and
request information about your phone such as: the brand name, model number,
registration number, and ringer equivalence number. This information is provided on a
label located at the bottom of the base unit and handset.
You may not directly connect your telephone equipment to coin telephone services.
Check with your local telephone company if you wish to connect your telephone
equipment to a party line service. Some party line services require a special adaptor
or modification to your telephone.
It should be noted that some cordless telephones operate at frequencies that may
cause interference to nearby TVs and VCRs; to minimize or prevent such interference,
the base of the cordless telephone should not be placed near or on top of a TV or
VCR; and, if interference is experienced, moving the cordless telephone farther away
from the TV or VCR will often reduce or eliminate the interference.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY/SERVICE
TELEPHONE/TELEPHONE ANSWER MACHINE LIMITED WARRANTY
Toshiba America Consumer Products.Inc(“TACP”) and Toshiba Hawaii,Inc.(“THI”) make the following
limited warranties. These limited warranties extend to the original consumer purchaser or any person
receiving this set as a gift from the original consumer purchaser and to no other purchaser or transferee.
(3) Within the continental U.S.A., if you should
find a defective product within the warranty period
please call 1-877-644-7373.
Limited One(1) Year Warranty of Labor
and parts
TACP/THI warrant this product and its parts
against defects in materials or workmanship for a
period of one(1) year after the date of original retail
purchase. During this period, TACP/THI will repair
or replace your defective product with a new or
refurbished unit at our option.
(4) Warranties extend only to defects in materials or
workmanship as limited above and do not extend to
any product or parts which have been lost or
discarded by you, or to damage to products or parts
caused by misuse, accident, damage caused by Acts
of God, such as lightning or fluctuations in electric
power, improper installation, improper maintenance
or use in violation of instructions furnished by us;
or to units which have been altered or modified
without authorization of TACP/THI, or to damage
to products or parts thereof which have had the
serial number removed, altered, defaced or
rendered illegible.
Owner’s Manual
You should read the owner’s manual thoroughly
before operating this product.
Your Responsibility
The above warranties are subject to the following
conditions.
(1) You must provide a copy of your bill of sale or
other proof of purchase.
(2) These warranties are effective only if the
product is purchased and operated within the USA
or Puerto Rico.
(5) Physically damaged products are not acceptable
for repair or exchange within or after the warranty
period expires.
How to Obtain Warranty Service
In the event a problem should develop with your product, please proceed as follows;
In The Continental United States contact: In Hawaii contact:
Toshiba Hawaii, Inc.
327 Kamakee Street,
Honolulu, HI 96814
(808)-591-8377
All warranties implied by state law, including the implied warranties of merchantability and fitness for a
particular purpose, are expressly limited to the duration of the limited warranties set forth above. With the
exception of any warranties implied by state law as hereby limited, the foregoing warranty is exclusive and
in lieu of all other warranties, guarantees, agreements and similar obligations of manufacturer or seller
with respect to the repair or replacement of any parts. In no event shall TACP/THI be liable for
consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the terms of
these warranties in any manner whatsoever. The time within which an action must be commenced to
enforce any obligation of TACP/THI arising under the warranty or under any statute, or law of the United
States or any state thereof, is hereby limited to ninety(90) days from the date you discover, or should have
dicovered, the defect. This limitation does not apply to implied warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights which may vary from state
to state. Some states do not allow limitation on how long an implied warranty lasts, when an action may be
brought, or the exclusion or limitation of incidental or consequential damages, so the above provisions may
not apply to you.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE OPERATION CARDS
CUT
REMOTE OPERATION OF FT-8901
during playback. To repeat, press #1
during playback. To delete, press #4
during playback.
C To record memo message, press #7.
To record greeting message, press
#8. To stop recording, press #5. To
turn on the answer mode, press #6.
To turn off the answer mode, press
#9.
A Call your machine from touch tone
phone. After your machine answers,
enter # and security code (PIN)
pressing each digit for at least 1
second. If you enter # and PIN
correctly, your machine sounds
invitation tone after the
announcement. Now enter the
command (# and number) by pressing
the keypad.
D To stop operation, press #5.
B To playback incoming and memo
messages, press #2. To skip, press #3
CORTE
OPERACIONES POR CONTROL REMOTO FT-8901
borrar presione #4 durante la
A
Llame a su teléfono desde un teléfono
de teclado. Después que su teléfono
conteste, introduzca # y el código de
seguridad (PIN) presionando cada
dígito durante 1 segundo como
mínimo. Si introduce correctamente #
y el PIN, su teléfono emitirá un tono de
invitación después del anuncio. Luego
introduzca el mandato (# y un número)
presionando las teclas.
reproducción.
C
Para grabar mensajes de memorando
presione #7. Para grabar un mensaje
de saludo presione #8. Para detener
la grabación presione #5. Para
activar o desactivar el modo de
contestación presione #6. Para
desactivar el modo de contestación
presione #9.
D
Para detener la operación presione
#5.
B
Para reproducir los mensajes recibidos
y los memorandos presione #2. Para
saltar presione #3 durante la
reproducción. Para repetir presione
#1 durante la reproducción. Para
37
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE OPERATION CARDS
CUT
#
WHILE PLAYING THE OGM, KEY-IN
AND PIN
MESSAGE
MESSAGE REPEAT
MESSAGE SKIP
PLAYBACK
(during
1
2
3
#
#
#
playback)
RECORD STOP/
OPERATION STOP
MESSAGE DELETE
ANSWER ON
(during
6
#
4
5
#
#
playback)
GREETING
RECORD
#
MEMO RECORD
ANSWER OFF
9
7
8
#
#
HELP GUIDANCE
REMOTE ACCESS
0
#
#
PIN
CORTE
DURANTE LA REPRODUCCIÓN DEL MENSAJE DE
#
CONTESTACIÓN, PRESIONE
Y PIN
REPETICIÓN DE
REPRODUCCIÓN
SALTO DE MENSAJE
MENSAJE
DE MENSAJE
(durante la
1
2
3
#
#
#
reproducción)
BORRADO DE
MENSAJE
ACTIVACIÓN DE
DETENCIÓN DE
CONTESTACIÓN
GRABACIÓN/OPERACIÓN
(durante la
6
#
4
5
#
#
reproducción)
DESACTIVACIÓN
GRABACIÓN DE MENSAJE GRABACIÓN DE MENSAJE
DE MEMORANDO
DE CONTESTACIÓN
DE CONTESTACIÓN
9
7
8
#
#
#
ACCESO AL
ASISTENCIA
ANUNCIO
CONTROL REMOTO
0
#
#
PIN
38
Download from Www.Somanuals.com. All Manuals Search And Download.
For technical assistance, purchase of accessories
IMPORTANT
We suggest you record the following information and retain for
your records along with your bill of sale or equipment document.
Model no.__________________ Serial no.______________
Purchase date______________ Dealer_________________
Dealer address _____________________________________
2001 TOSHIBA AMERICA CONSUMER PRODUCTS, INC.
©
UCZZ01315BZ
RC009793
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|