Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
Page
TO THE PURCHASER
4
4
4
4
ILLUSTRATIONS
DIRECTION REFERENCE
WARRANTY
SAFETY PRECAUTIONS
SAFETY FIRST
5
5
6
CHILDREN
CAB SAFETY
6
6
6
BEFORE OPERATION
CAB OPERATION
MAINTENANCE
DECALS
9
10
CAB OPERATING INSTRUCTIONS
11
11
11
11
11
12
12
12
12
13
13
13
14
14
14
14
14
14
DOORS AND WINDOWS
Locking and Un-locking the Door
Opening the Door
Opening Escape Window
Opening Side Window
DOME LIGHT
CAB SWITCHPLATE
Front Wiper/Washer Switch
Using the Wipers in Winter
Front Work Lights
Rear Work Light (Optional)
HEATER/PRESSURIZING FAN
Airflow Direction
Air Control Louvers
HEATER CONTROLS ON SWITCH PLATE
Fan Control
Temperature Control
PARTS
15
16
17
18
19
20
21
22
23
24
FIXED GLASS
ROPS MOUNTING ASSEMBLY
FRAME PARTS
BODY PANELS
DOOR ASSEMBLY
ACCESSORIES ASSEMBLY
ESCAPE WINDOW ASSEMBLY
OPENING SIDE WINDOW ASSEMBLY
ROOF/HEADLINER
3
Download from Www.Somanuals.com. All Manuals Search And Download.
TO THE PURCHASER
All products are designed to give safe, dependable service if they are operated and
maintained according to instructions. Read and understand this manual before
operation.
This manual has been prepared to assist the owner and operators in the safe operation
and suitable maintenance of the cab. The information is applicable to products at the
time of manufacture and does not include modifications made afterwards.
Read and understand this operator’s manual before attempting to put equipment into
service. Familiarize yourself with the operating instructions and all the safety
recommendations contained in this manual and those labeled on the equipment and on
the tractor. Follow the safety recommendations and make sure that those with whom you
work follow them.
ILLUSTRATIONS
The illustrations may not necessarily reproduce the full detail and the exact shape of the
parts or depict the actual models, but are intended for reference only.
DIRECTION REFERENCE
All references to right and left, forward or rearward, are from the operator’s seat, facing
the steering wheel.
WARRANTY
You are responsible for notifying the Commercial Products Distributor or Authorized
Commercial Products Dealer from whom you purchased this product as soon as you
believe a warrantable condition exists.
If you need help locating a Commercial Products Distributor or Authorized Commercial
Products Dealer, or if you have questions regarding your warranty rights or
responsibilities, you may contact us at:
Jodale Perry Corporation
Box 909
300 Route 100
Morden, Manitoba, Canada
R6M 1A8
To assist your dealer in handling your needs, please record hereafter the model number
and serial number of your cab and tractor. It is also advisable to supply them to your
insurance company. It will be helpful in the event that the cab or tractor is lost or stolen.
TRACTOR CAB: __________________________________________________
MODEL: _________________________________________________________
SERIAL NUMBER: ________________________________________________
DATE OF PURCHASE: _____________________________________________
DEALER NAME: __________________________________________________
4
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFETY PRECAUTIONS
SAFETY FIRST
This symbol, the industry’s “Safety Alert Symbol”, is used throughout this
manual and on labels on the machine itself to warn of the possibility of personal injury.
Read these instructions carefully. It is essential that you read the instructions and safety
regulations before you attempt to assemble or use this cab.
Indicates an immediate hazardous situation which, if not avoided,
will result in death or serious injury.
DANGER:
WARNING:
CAUTION:
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
may result in minor or moderate injury.
Indicates that the cab or property damage could result if
instructions are not followed.
IMPORTANT:
NOTE:
Gives helpful information.
All products are designed to give safe, dependable service if they are operated and
maintained according to instructions. It is the owner’s responsibility to be certain anyone
operating this product reads this manual, and all other applicable manuals, to become
familiar with this cab and all safety precautions. Failure to do so could result in serious
personal injury or cab damage. If you have any questions, consult your dealer.
Read and understand this manual before operation.
NOTE
A safe operator is the best assurance against accidents. All operators, no matter how
experienced they may be, should read this operator’s manual and all other related
manuals before attempting to operate the cab. Please read the following section and pay
particular attention to all safety recommendations contained in this manual and those
labeled on the cab and on the tractor.
Cab recommended for use on 4WD units only.
Weight Requirements for compliance with ANSI B71.4-2004
Groundsmaster 3280-D 4WD Serial Numbers (250000001 – 250999999 205 lbs.
Qty. (1) Toro Part 24-5780 Rear Weight Kit, Qty. (1) Toro Part 108-9682 Rear Weight
Kit, and Qty. (1) Toro 24-5790 Rear Weight 35 lbs.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
CHILDREN
Tragic accidents can occur if the operator is not alert to the presence of children.
Children are generally attracted to machines and the work being done. Never assume
children will remain where you last saw them.
1. Keep children out of the operating area and under the watchful eye of another
responsible adult.
2. Be alert and turn machine off if children enter the work area.
3. Before and when backing up, look behind for small children.
4. Never carry children while operating the machine. They may fall off and be
seriously injured or interfere with the safe operation of the machine.
5. Never allow children to play on the machine or cab even though they are turned
off.
6. Never allow children to operate the machine even under adult supervision.
7. Use extra care when approaching blind corners, shrubs, trees, or other
obstructions that might hide children from sight.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
CAB SAFETY
BEFORE OPERATION
Read and understand both the tractor and this operator’s manual before operating the
equipment. Know how to operate all controls and how to stop the unit and
disengage controls quickly. Lack of knowledge could lead to accidents.
1. Never wear loose, torn, or bulky clothing around the tractor and cab. They can
catch on moving parts or controls, causing injury.
2. Before and during seasons, thoroughly inspect the area where the cab is to be
used and remove all objects that may be blown or cause damage to the cab.
3. Do not operate cab in wintertime without wearing adequate winter garments.
Always wear protective clothing.
4. Never attempt to make any adjustments while engine is running, Read this
manual carefully to acquaint yourself with the cab as well as the tractor
operator’s manual. Working with an unfamiliar cab can lead to accidents. Be
thoroughly familiar with the controls and proper use of the cab.
5. Keep all safety guards in place and verify hardware for proper tightening.
6. Check for moving parts excessive wear regularly. Replace worn parts with
genuine parts.
7. Replace all missing, illegible, or damaged safety and warning decals. See list of
decals in operator’s manual.
8. Do not modify or alter this cab or any of its components or any cab function
without first consulting your dealer.
9. Keep safety decals clean of dirt and grime.
10. Make sure tractor is counterweighted as recommended by your dealer. Weights
provide the necessary balance to improve stability, traction and steering.
CAB OPERATION
1. Before leaving the tractor unattended, take all possible precautions. Park the
tractor/cab on level ground, place the transmission in neutral, set the parking
brake, disengage the PTO, lower all attachments to the ground, place all levers
including the auxiliary control levers in neutral, shut off the engine and remove
the ignition key.
2. Before starting the tractor/cab, inspect and clean all moving parts.
3. Be sure the PTO switch/lever is in OFF position before starting engine.
4. Exercise extreme caution when operating on or crossing a gravel drive, walks, or
roads. Stay alert for hidden hazards or traffic.
5. Do not carry passengers.
6. Keep clear of all rotating parts. Do not put hands or feet under or into tractor
attachments with engine running.
7. Park the tractor/cab on level ground, place the transmission in neutral, set the
parking brake, disengage the PTO, lower tractor attachments to the ground,
place all control levers in neutral, shut off the engine, remove the ignition key and
allow any moving parts to stop BEFORE making any repairs, adjustments, or
inspections.
8. Do not run engine indoors except when starting engine and transporting
attachment in or out of building. Carbon monoxide gas is colorless, odorless, and
deadly.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Never operate cab without guards, and other safety protective devices in place.
All tractor and cab covers must be correctly installed at all times. When
necessary to remove these, they must be re-installed immediately.
10. Never operate cab/tractor at high transport speeds on a slippery surface.
11. Use extra caution when backing up.
12. Disengage power to cab when transporting or when not in use.
13. Never operate cab/tractor without good visibility and lighting.
14. Prolonged exposure to loud noise can cause hearing impairment or loss of
hearing. Wear a suitable hearing protective device such as earmuffs or earplugs
to protect against objectionable or uncomfortable noises.
15. Never allow anyone near the work area.
16. Never allow anyone to operator the cab until they have read the manual
completely and are familiar with basic tractor and cab operation.
17. Make sure the tractor is counterweighted as recommended by your dealer.
Weights provide the necessary balance to improve stability, traction, and
steering.
18. Always make sure all cab components are properly installed and securely
fastened BEFORE operation.
19. Make sure nobody is in the working area of the tractor/cab as serious personal
injury could occur.
20. Do not allow passengers on the tractor/cab at any time. There is no safe place
for passengers in the cab. The operator MUST sit in the tractor seat.
21. Eye and hearing protection is recommended when operating the cab.
22. Inspect the cab after striking and foreign object to assure that all cab parts are
safe and secure and not damaged.
23. Be especially observant of operating area and terrain. Watch for holes, rocks, or
other hidden hazards. ALWAYS inspect area prior to operating cab/tractor.
24. DO NOT operate cab near the edge of drop-offs or banks.
25. DO NOT operate cab on steep slopes as overturn may result.
26. Operate up and down (not across) intermediate slopes. Avoid sudden starts and
stops.
27. Slow down before you change directions on any slope.
28. Never stand alongside the tractor/cab while the engine is running.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
ALWAYS USE GENUINE PARTS WHEN REPLACEMENT PARTS ARE REQUIRED.
1. Keep the tractor and cab properly maintained.
2. Park the tractor/cab on level ground, place the transmission in neutral, set the parking brake,
disengage the PTO, lower all tractor attachments to the ground, place all control levers in
neutral, shut off the engine and remove the ignition key and allow all moving parts to stop
BEFORE making any tractor/cab adjustments.
3. To avoid injury, do not adjust, unblock the driving system, or service the cab with the tractor
engine running. Make all moving parts have completely stopped before leaving the
operator’s seat.
4. Keep the tractor/cab clean. Snow, dirt, or ice build-up can lead to malfunction or personal
injury from thawing and refreezing in the garage.
5. Always were eye protection when cleaning or servicing the cab.
6. DO NOT service the tractor while the engine is running or hot, or if the unit is in motion.
Always lower tractor attachments to the ground. If necessary to service attachments in
raised position, securely support with stands or suitable blocking before working underneath.
Do not rely on hydraulically supported devices for your safety. They can settle suddenly, leak
down, or be accidentally lowered.
7. Do not attempt to service machine, clear obstructions, or unclog drive system with the engine
running. Always shut off engine and allow all motion to cease.
8. The manufacturer will not claim responsibility for fitment of unapproved parts and/or
accessories and any damages as a result of their use.
9. Make sure all shields and guards are securely in place following all service, cleaning, or
repair work.
10. Do not modify or alter cab or any of its components or operating functions. If you have any
questions concerning modifications, consult with your dealer.
11. Do not operate a cab that is defective or has missing parts. Make sure all recommended
maintenance procedures are completed before operating cab.
12. Check all controls regularly and adjust where necessary. Make sure that the brakes are
evenly adjusted.
13. Periodically check all nuts and bolts for tightness, especially wheel hub and rim nuts.
14. To avoid serious personal injury: Escaping hydraulic/diesel fluid under pressure can
penetrate the skin causing serious injury. Do not use your hands to check for leaks. Use a
piece of cardboard or paper to search for leaks.
15. Stop engine and relieve pressure before connecting or disconnecting hydraulic hoses.
Tighten all connections before starting engine or pressurizing hoses.
16. Ensure cab hinges are properly lubricated. If hinges are closing hard, or partially seized,
lubrication is required. Remove door/escape window/side vent windows to grease each part
of the hinge separetely. This should occur semi-annually.
Download from Www.Somanuals.com. All Manuals Search And Download.
DECALS
Replace immediately if damaged or missing. Contact Jodale Perry for replacement
decals.
CAUTION
The resulting noise levels when
using this product will exceed
OSHA standards for an 8 hour
workday and hearing protection
with a Noise Reduction Rating
(NRR) of 22 or higher is
required.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
CAB OPERATING INSTRUCTIONS
DOORS AND WINDOWS
Locking and Un-locking the Door
From the outside: Insert key into the door lock. Turn key clockwise to unlock the door.
Turn key the counter-clockwise to lock the door. When the key is in the vertical position,
it can be removed from the lock. The cab door is not lockable from the inside of the cab.
———————————————————————————————
Opening the Door
From the outside: Unlock the door and push the round button. From the inside: Push the
door latch handle down and push open the door so that the gas shock opens the door.
Exterior
interior
———————————————————————————————
Opening Escape Window
For ventilation: Grab the handle and pull out and away from window so that latch slides
on the pin. Slide on the pin until it reaches the end of travel on the handle and then
secure onto pin by pushing down on the handle.
For escape: Grab the handle and pull out and then slide latch down until the end of
travel. Pull handle away from pin and window is free from latch. Open window fully for
escape.
———————————————————————————————
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Opening Side Window
Pull the side window latch up to release from the pin, and push out to open window.
Push down on latch to secure open for ventilation.
———————————————————————————————
DOME LIGHT
The rocker switch on the domelight activates the light. Push switch down to turn on
domelight and to turn off downlight.
IMPORTANT: The cab is wired such that the ignition switch turns on all cab
electrical features.
———————————————————————————————
CAB SWITCHPLATE
IMPORTANT: Do not activate the wipers when the windows are dry as the glass
may get scratched.
Front Wiper/Washer Switch (Washer Optional)
When the top portion of the wiper switch is pressed down, the wiper is activated and
stays on. If the cab is equipped with the optional Washer Kit, then the bottom portion of
the rocker switch will activate the washer stream as well as the wiper motor in a
momentary state. Hold down the switch to continue a stream of washer fluid. If the cab is
not equipped with washer kit, then the bottom portion of the switch is a momentary wiper
motor speed.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
.
Using the Wipers in Winter
1. While not used in winter, keep the blades off the windshield to prevent them from
being stuck with ice.
2. If the windshield is covered with snow, scrape it off before using the wipers.
3. If the wiper blade is stuck to the windshield with ice and does not move, switch wiper
to the OFF position, and remove the ice from the wiper blade.
Front Work Lights
Ensure that the ignition switch is on and press the top portion of the front work light
switch. The work lights will turn on.
———————————————————————————————
Rear Work Light (Optional)
Ensure that the ignition switch is on and press the top portion of the rear work light
switch. The work light will turn on if equipped.
Ensure that the ignition switch is on and press the top portion of the hazard switch. The
beacon will turn on if equipped.
rear work light
beacon
———————————————————————————————
13
Download from Www.Somanuals.com. All Manuals Search And Download.
HEATER/PRESSURIZING FAN
CAUTION To avoid personal injury: Have the tractor repaired immediately if
any of the following defects are discovered. Such defects may cause burns or
injuries. They may also cause engine seizure or other serious failure.
Daily Inspection:
1. Check for scratches, cracks, or swelling in the water hoses.
2. Check for leakage at water hose joints.
3. Check for loose mounting bolts and damaged brackets.
Do not touch the water hoses and the heater with your hand. You may get burned.
Airflow Direction
Air in the cab is drawn through the filter in the rear of the cab and then is discharged
inside the cab through the three vents in the headliner.
———————————————————————————————
Air Control Louvers
The front three louvers can be adjusted individually as required. For windshield defrost,
rotate the louvers to face towards the windshield.
———————————————————————————————
HEATER CONTROLS ON SWITCH PLATE
Fan Control
The fan has three speeds and on off position. Turn the knob clockwise to increase fan
speed and maximum air flow output. If the windows fail to defrost in extreme conditions
or become cloudy when dehumidifying the cab, wipe off moisture with a soft cloth.
———————————————————————————————
Temperature Control
The heater control knob turns counter clockwise to open a water valve for more heat. To
reduce the level of heat, turn the knob clockwise to close the valve.
———————————————————————————————
14
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS
All parts are illustrated in ‘exploded views’ which show the individual parts in their normal
relationship to each other. Reference numbers are used in the illustrations. These
numbers correspond to those in the ‘Item #’ column, and are followed by the description
and quantity required.
Orders must give the complete description, correct part number, the total amount
required, cab serial number, method of shipment and the shipping address.
The manufacturer reserves the right to change, modify, or eliminate from time to time, for
technical or other reasons, certain or all data, specifications, or the product or products
themselves, without any liability or obligation.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Fixed Glass
Item #
Description
Qty. JDP P/N
1
n/a
2
n/a
3
n/a
4
5
Windshield Glass
Windshield Weatherstripping (16.04LF)
Rear Window
Rear Window Weatherstripping (11.09LF)
Lower Right Window
Lower Right Window Weatherstripping (7.43LF)
Nut, Flange, 1/4", Macro-black
Bolt, Step, 1/4" x 1 1/4", Macro-black
Bushing, Neoprene, 5MM, Black
Bushing, Neoprene, 8MM, Black
1
1
1
1
1
101454
101460
101457
101463
101459
101465
100223
100003
100382
100381
1
12
12
12
12
6
7
16
Download from Www.Somanuals.com. All Manuals Search And Download.
ROPS Mounting Assembly
Item #
Description
Qty. JDP P/N
1
2
3
4
5
6
7
8
9
Front Cab Bracket
Rear Left Bracket
Rear Right Bracket
1
1
1
4
8
4
4
4
4
2
2
101468
101469
101470
100121
100116
100450
100448
100449
100054
100886
100763
Bolt, Hex, 1/2" x 3", Gr. 8, YD
Nut, Hex, Locking, 1/2", Gr. 8, YD
Washer, Flat, Steel, 1/2" x 2 1/2", YD
Isolator, Rubber, 1/2" x 2 1/2", Black
Washer, Flat, Rubber, 1/2" x 2 1/2", YD
Bolt, Hex, 1/2" x 1 1/2", Gr. 8, YD
Bolt, Hex, 7/16" x 1 1/2", Gr. 8, YD
Nut, Flange, 7/16", Gr. 8, YD
10
11
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Frame Parts
Item #
Description
Qty. JDP P/N
1
2
3
4
5
6
7
8
9
10
11
12
13
n/a
Striker Pin
Striker Pin Nut
Bolt, Flange, 1/4" x 1/2", YD
Striker Plate
Washer, Flat, 1/2", Gr. 8, YD
Gas Shock
Gas Shock Ball Stud
Gas Shock Clip
Bolt, Hex, 5/16" x 1 1/2", YD
Latch Bushing
Nut, Flange, 5/16", YD
Window Arm Pin
Nut, Flange, M10 x 1.5
Lift Hole Plug Buttons
1
1
2
1
1
1
1
2
2
4
2
1
1
2
100013
100014
100278
100012
100431
100365
100366
100367
100376
100033
100005
100019
100020
100478
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Body Panels
Item #
Description
Qty. JDP P/N
1
2
3
4
5
Left Composite Side Panel
Right Composite Side Panel
Nut, Extruded-Panel, 1/4"
Screw, Button-Head, 1/4" x 1", Macro-black
Rear Shield
1
1
8
8
1
4
101471
101472
100042
100441
101482
101483
n/a
Nut, 4-Lobe, 1/4"
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Door Assembly
Item #
Description
Qty. JDP P/N
Item #
Description
Qty. JDP P/N
1
2
3
4
5
6
7
8
9
Door Glass
1
1
6
4
2
4
4
1
1
1
1
1
101455
101461
100223
100635
100003
100382
100362
101445
101397
101478
101476
101477
13 Bolt, Flange, M6 x 1.0 x 25mm, YD
14 Door Latch - Left
15 Nut, Flange, M6 x 1.0m YD
16 Gas Shock Ball Stud
17 Gas Shock Mount Plate
18 Nut, Flange, 5/16", YD
19 Door Hinge Support Weldment
20 Door Latch Support Weldment
21 Door Grab Handle Weldment
22 Door Hinge Weldment
3
1
2
1
1
1
1
1
1
2
2
100007
100006
100008
100366
100368
100005
100936
100937
100938
100377
100026
Door Glass Weatherstripping (13.57LF)
Nut, Flange, 1/4", Macro-black
Bolt, Step, 1/4" x 1 1/2", Marco-black
Bolt, Step, 1/4" x 1", Macro-black
Bushing, Neoprene, 5MM, Black
Neoprene, Injection Molded, 5MM, Black
Door Push-Button Handle
Door Handle Bushing
Washer, Flat, 3/16"
Nut, Coupler, 10-32 x 3/4"
Machine Screw, 10-32 x 1 1/4"
10
11
12
23 Hinge Brass Flat Washer
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories Assembly
Item #
Description
Qty. JDP P/N
1
2
3
n/a
4
5
6
7
8
9
Exterior Mirror
2
2
1
1
3
1
1
6
4
2
1
100440
101224
100438
100439
100731
100220
101481
100223
100384
100668
100822
Nut, Lock, Crimped, 1/2", YD
Mirror Bracket, Left
Mirror Bracket, Right
Worklamp
Washer Bottle w/Pump
Washer Bottle Mount Plate
Nut, Flange, 1/4", MB
Bolt, Flange, 1/4" x 1/2", YD
Bolt, Flange, 3/8" x 3/4", YD
Wet Arm Kit
n/a
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Item #
Description
Escape Window
Glass Weatherstripping (10.63LF)
Nut, Flange, 1/4", Macro-black
Bolt, Step, 1/4" x 1", Macro-black
Bolt, Step, 1/4" x 1 1/4", Macro-black
Bushing, Neoprene, 5MM, Black
Escape Window Latch Bracket
Window Arm
Bolt, Carriage, 3/8" x 2 1/2", YD
Nut, Serrated, Flange, 3/8", YD
Neoprene, Injection Molded, 5MM, Black
Escape Window Hinge Weldment
Washer, Flat, 1/4", Yellow Dichrome
Hinge Brass Flat Washer
Qty. JDP P/N
1
n/a
2
3
4
5
6
7
8
1
1
6
2
4
8
1
1
1
1
2
2
4
2
101458
101464
100223
100383
100003
100382
100385
100017
100399
100018
100362
100378
100380
100026
9
10
11
12
n/a
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Opening Side Window Assembly
Item #
Description
Qty. JDP P/N
Item #
Description
Qty. JDP P/N
1
n/a
2
3
4
5
6
7
8
Left Side Window
1
1
4
4
8
1
1
1
1
2
4
2
101456
101462
100223
100003
100382
100374
100027
100005
100375
100379
100026
100380
n/a Right Side Window
1
1
4
4
8
1
1
1
1
2
4
2
101456
101462
100223
100003
100382
100374
100028
100005
100375
100379
100026
100380
Glass Weatherstripping (8.43LF)
Nut, Flange, 1/4", Macro-black
Bolt, Step, 1/4" x 1", Macro-black
Bushing, Neoprene, 5MM, Black
Bolt, Carriage, 5/16" x 1", YD
Side Window Latch
n/a Glass Weatherstripping (8.43LF)
n/a Nut, Flange, 1/4", Macro-black
n/a Bolt, Step, 1/4" x 1", Macro-black
n/a Bushing, Neoprene, 5MM, Black
n/a Bolt, Carriage, 5/16" x 1", YD
n/a Side Window Latch
Nut, Flange, 5/16", YD
n/a Nut, Flange, 5/16", YD
Side Window Latch Bracket
Side Window Hinge Weldment
Hinge Brass Flat Washer
n/a Side Window Latch Bracket
n/a Side Window Hinge Weldment
n/a Hinge Brass Flat Washer
n/a Washer, Flat, 1/4", YD
9
n/a
10
Washer, Flat, 1/4", YD
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Roof/Headliner Assembly
Item #
Description
Qty. JDP P/N
Item #
Description
Qty. JDP P/N
1
2
3
4
n/a
5
6
7
8
9
Headliner
Roof
Air Filter Retainer
Domelight
1
1
1
1
1
2
2
4
2
2
2
1
5
5
101466
101467
101220
100402
100530
100374
101194
100005
100453
101269
101270
101261
100380
100727
14 Nut, Extruded-Panel, 1/4"
15 Bolt, Step, 1/4" x 1", Macro-black
16 Nut, Flange, 1/4", Macro-black
17 Bushing, Neoprene, 5MM, Black
18 Knob, 4-Lobe, 1/4" x 1"
19 Air Filter
20 Front Wiper Motor w/Bracket
21 Front Pantograph Wiper Arm, 22"
22 Front Wiper Blade, 24"
23 Pantograph Adapter Kit
24 Bolt, Hex, 1/4" x 2", UNF, YD
25 Louvre Assembly
7
1
1
5
2
1
1
1
1
1
2
3
100042
100003
100223
100382
100130
100782
100481
100490
100491
100532
100482
100405
Headliner Weatherstrip 1 (15.4 LF)
Bolt, Carriage, 5/16" x 1", YD
Bolt, Carriage, 5/16" x 2", YD
Nut, Flange, 5/16", YD
Fuse Blocks, ATO, 4-Port
Front Headliner Coupler Plate
Rear Headliner Coupler Plate
Rear Headliner Coupler Plate
Washer, Flat, 1/4", YD
Screw, Button-Head, 1/4" x 1 1/2"
10
11
12
13
24
Download from Www.Somanuals.com. All Manuals Search And Download.
|