READ AND SAVE THESE INSTRUCTIONS
WARNING: A risk of fire and electrical shock exists in all electrical appliances
and may cause personal injury or death. Please follow all safety instructions.
Stea m Xtreme Iron
Use and Care Guide - Models 3342 and 3342CAN
• INSTANT HEAT UP. REACHES MAXIMUM SETTING IN LESS THAN
45 SECONDS
• EXTRA POWERFUL STEAM OUTPUT
• EXTRA POWERFUL HORIZONTAL AND VERTICAL STEAM ACTION
• DESCALING CARTRIDGE REMOVES MINERAL DEPOSITS THAT CAN
CLOG IRON
• VARIABLE STEAM CONTROL
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
5
6
4
3
7
1. Water fill cover
2. Spray nozzle
3. Variable steam dial
4. Spray button
5. Burst of steam button
6. Power On/ Ready Light
7. Pivot cord
2
1
8. Temperature Dial
9. See-through water reservoir
10. Non-stick soleplate
8
9
10
TEMPERATURE AND STEAM GUIDE
Temperature/ Steam
Fabric
Delicates
Nylon
Acetate
Silk
Low
Medium
High
Polyester
Wool
Cotton
Linen
USING YOUR IRON FOR THE FIRST TIME
1. Remove any protective coverings from the soleplate and the body of
the iron.
2. Unwind and straighten the power cord.
NOTE: Before you use your iron for the first time, you should flush the
soleplate steam vents to ensure that no stain is transferred onto fabric
from residue possibly left in the vents from the manufacturing process.
To do that, see SELF CLEANING/ FLUSHING.
3. Fill the reservoir with tap water or distilled water. Do not use
chemically descaled water or any other liquids for refilling, see
FILLING THE WATER RESERVOIR.
4. Stand the iron on its heel in an upright position on a heat resistant
surface and plug into a 120V ~ 60 Hz outlet.
. The ready light will
5. Turn the temperature dial to maximum setting • • •
come on.
6. The ready light will turn off when the desired temperature is reached.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Turn the variable steam dial 90° counter-clockwise to
maximum
steam position. Steam will begin to come through the vents of the
soleplate.
For best results, check garment labels for the temperature and steam setting
recommended by the fabric manufacturer, or consult the enclosed garment
care tips pamphlet for additional information.
To prevent damaging garments from too hot of an iron, it is best to first iron
garments that require a low temperature. If you should need to switch from
a high setting to a lower temperature, for example
allow the iron about 5 minutes to reach the lower temperature.
Cotton to Nylon,
• • •
•
Tips: If you are unsure of a garment’s fabric content, start on a low setting
and test the iron on an area of the garment that does not show, such as a
seam. Gradually increase the heat setting until wrinkles remove without
damaging the fabric. Sort out the garments to be ironed according to the
type of fabric. This will minimize the frequency of temperature adjustment
for different garments.
To prevent shine, iron dark garments or those made of silk, acetate or rayon
inside out.
USING AS A DRY IRON
The iron can be used on the dry setting with or without water in the
reservoir. However, it is best to avoid having the reservoir too full of water
while dry ironing.
1. Position temperature dial to MIN, lowest setting.
2. Turn the variable steam dial to O for no steam.
3. Stand the iron on its heel in an upright position on a heat resistant
surface and plug into a 120V ~ 60 Hz outlet.
4. Turn the temperature dial clockwise to the desired setting.
5. When the ready light goes off, the iron has reached the desired
temperature.
6. When finished, turn temperature dial to MIN, lowest setting and
unplug. Allow the iron to cool before cleaning the exterior or storing.
NOTE: During ironing, the ready light may cycle on again which indicates
the iron is heating to maintain the proper temperature.
CAUTION: If the iron is hot, DO NOT fill it with water.
USING AS A STEAM IRON
When using as a steam iron, be sure the temperature setting on the
temperature dial is on the maximum steam setting
other setting for steam ironing.
. Do not use any
• • •
1. Unplug the iron from the outlet.
2. Fill the water reservoir, see FILLING THE WATER RESERVOIR.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Stand the iron on its heel in an upright position on an iron-safe
surface and plug into a 120V ~ 60 Hz outlet.
4. Turn the temperature dial to maximum position.
5. Allow approximately 1 minute for the iron to reach the desired
temperature. The ready light will turn off.
6. Turn the variable steam dial clockwise for more steam and counter
clockwise for less steam. Turn the variable steam dial to
for max steam.
position
7. When finished, turn temperature dial to MIN, turn variable steam dial
to O and unplug iron. Allow iron to cool before cleaning the exterior
of the iron or storing.
CAUTION: Avoid coming in contact with escaping steam.
BURST OF STEAM
For a penetrating burst of steam to iron faster and to smooth difficult
wrinkles, firmly depress the burst of steam button. Between the individual
bursts of steam, pause for at least 3 seconds to let the iron reheat for
maximum additional steam.
SPRAY
For a mist of water to moisten dry and difficult fabrics such as linen,
cotton or wool, or to handle stubborn wrinkles, press the spray button. The
spray function is also handy to moisten creases accidentally ironed into the
fabric. The spray function can be used on any setting and does not affect
the ironing temperature.
NOTE: You may have to pump the spray button several times the first time
you use the iron in order to start the spraying action.
USING THE VERTICAL STEAM FUNCTION
The vertical steam features allows you to eliminate wrinkles from drapes
without having to take them off the rod or to freshen the appearance of
clothing while on the hanger.
1. Unplug the iron from the outlet.
2. Fill the reservoir with water, see FILLING THE WATER RESERVOIR.
3. Position temperature control dial to MAX setting.
4. Stand the iron on its heel in an upright position on an iron-safe
surface and plug into 120V ~ 60 Hz outlet.
5. Allow approximately 1 minute for the iron to reach the desired
temperature. The ready light will turn off.
6. Hold the iron 7-15 inches away from the garment and press the burst
of steam button once.
7. Wait a few seconds before pressing the burst of steam button again.
The ready light will cycle on and then off during this process. Do not
press the burst of steam button more than three times successively
when ready light is ON. For best results, keep reservoir at least half
full.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
8. When finished, turn temperature dial to MIN, turn variable steam dial
to O and unplug iron. Allow iron to cool before cleaning the exterior
of the iron or storing.
CAUTION: Avoid coming in contact with escaping steam.
CLEANING STEAM VALVE
1. Turn the variable steam dial counter-clockwise to the descaling
position
and pull out to remove from the iron.
2. Dip the steam valve into white vinegar to dissolve calcium and mineral
deposits.
3. Never use any sharp or rough objects to remove the deposits from the
Steam Valve.
4. Rinse the steam valve with tap water.
5. Replace the variable steam dial in the descaling position and gently
press down until in position.
6. Turn the variable steam dial to ‘O’ position.
DO NOT pour any chemicals into the water reservoir as they can damage
the iron.
FILLING THE WATER RESERVOIR
NOTE: FILL THE RESERVOIR WITH TAP WATER OR DISTILLED WATER. DO
NOT USE CHEMICALLY DESCALED WATER OR ANY OTHER LIQUIDS.
1. Unplug and allow the iron to cool before filling.
2. Turn the variable steam dial to no steam setting.
3. Hold the iron upright but slightly tipped.
4. Open the water fill cover by placing fingernail under one tab and lift
up.
5. Using the enclosed beaker or a measuring cup, slowly pour water into
the water fill. Do not fill past the maximum line on the water reservoir.
6. Close the water fill cover.
EMPTYING THE WATER RESERVOIR
NOTE: The water tank should be emptied after each use.
1. When finished, turn temperature control dial to MIN, turn the variable
steam dial to ‘O’ position and unplug the iron from the electrical outlet.
2. While the iron is still warm, hold the iron over a sink and allow the
iron to drain by tipping the point of the iron down.
3. Gently shake the iron to loosen any water drops that may be trapped.
The warmth of the iron should dry out any remaining water.
4. Press the burst of steam and spray buttons to release any water
remaining.
NOTE: If you empty the water reservoir after the iron has cooled, set the
iron in an upright position on its heel, plug it in and set the temperature dial
to maximum heat for 2 minutes. Then unplug the iron and let it cool before
storing it.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
SELF CLEANING/ FLUSHING
Flushing the iron is advised after every 5 uses or more regularly to prevent
harmful mineral build-up that can clog the iron and prevent it from heating
and steaming properly.
1. Fill the water reservoir half full, see FILLING THE WATER RESERVOIR.
2. Stand the iron on its heel in an upright position on an iron-safe
surface and plug into a 120V ~ 60 Hz. outlet.
3. Turn the temperature dial clockwise to the maximum setting
4. The ready light will turn off when the iron has reached the desired
.
• • •
setting.
5. Wait for one more cycle–the ready light will cycle on and back off
again.
6. Turn the temperature dial counter-clockwise to MIN.
7. Remove the cord from the outlet by grasping the plug rather than
pulling the cord.
8. Turn the steam control knob counter-clockwise to descaling position
The knob will raise slightly.
.
9. Steam and hot water will flow through the vents until the water reservoir
is emptied.
10. Gently move the iron back and forth until the water reservoir is empty.
11. Turn the steam control knob to ‘O’ position.
STORING THE IRON
Remove the cord from the outlet by grasping the plug rather than pulling the
cord. Empty the water reservoir after each use, see EMPTYING THE WATER
RESERVOIR. Wrap the cord around the cooled iron as shown
. Allow
the iron to COOL COMPLETELY before putting away. To protect the soleplate,
place the iron in an upright position on its heel.
CLEANING AND CARE
CAUTION: Unplug the iron from the electrical outlet and allow to cool before
cleaning the exterior of the iron and storing. Never immerse the iron in water.
NOTE: Do not put any chemical cleaning agents or solvents in the water
reservoir.
If starch or other residues cling to the soleplate, use hot iron cleaner
according to directions. Hot iron cleaner is available at mass merchandise,
discount or hardware stores.
IMPORTANT: Any servicing that requires disassembly must be performed by
an authorized service center.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE INFORMATION
Please refer to warranty statement to determine if in-warranty service
applies.
This appliance must be serviced by a Toastmaster authorized service center.
Unauthorized service will void warranty. Consult your phone directory
under “Appliances-Household-Small-Service and Repair,” or call
1-800-947-3744 in the U.S. and Canada, 52-5-397-2848 in Mexico.
If an authorized service center is not available locally, your appliance may
be returned postage prepaid to our National Service Center at the address
shown in the warranty statement.
Products must be adequately protected to avoid shipping damage.
Surround your appliance with three inches of protective padding and
include a copy of your dated sales receipt and a note explaining the
problem you have experienced. We recommend insuring your package.
No CODs accepted.
KEEP DATED SALES RECEIPT FOR WARRANTY SERVICE.
Keep this booklet. Record the following for reference:
Date purchased
Model number
Date code (stamped on bottom)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED ONE-YEAR GUARANTEE
Toastmaster Inc. warrants this product, to original purchaser, for one year from purchase date to be free of defects in material
and workmanship.
This warranty is the only written or express warranty given by Toastmaster Inc. This warranty gives you specific legal rights. You
may have other rights which vary from state to state. ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED IN DURATION TO THE DURATION OF
THIS WARRANTY.
Defective product may be brought or sent (freight prepaid) to an authorized service center listed in the phone book, or to Service
Department, Toastmaster Inc., 708 South Missouri St., Macon, MO 63552, for free repair or replacement at our option.
Your remedy does not include: cost of inconvenience, damage due to product failure, transportation damages, misuse, abuse, acci-
dent or the like, or commercial use. IN NO EVENT SHALL TOASTMASTER INC. BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
Some states do not allow limitations on how long an implied warranty lasts, or allow the exclusion or limitation of incidental
or consequential damages, so the above limitations or exclusions may not apply to you.
For information, write Consumer Claims Manager, at the Macon address. Send name, address, zip, telephone area code and
daytime number, model, serial number, and purchase date.
EVERYBODY EATS. It’s a fact of life.
But sometimes preparing
meals can become a chore.
That’s why TOASTMASTER has been invited
into millions of kitchens just like yours
so we can HELP YOU MASTER your
mixing, baking, grilling, toasting,
brewing, heating and serving
tasks WITH EASE AND STYLE.
The TOASTMASTER name stands for a
CELEBRATION of INNOVATION designed
to serve your life and keep you
COOKIN’ IN STYLE.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|