IMPORTANT FOR FUTURE REFERENCE
Please complete this information and retain
this manual for the life of the equipment:
Model #: _________________________
Serial #: _________________________
Date Purchased: _________________
Installation & Operations Manual
Oven Range
Model RH36, MH36
Manual 2M-1189333 Rev P (12/09)
$30.00
Oven Range
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS, QUESTIONS or CONCERNS
Before you proceed consult you authorized Toastmaster service agent directory
or
Call the Technical Service & Parts Department at 1-800-807-9054.
Table of Contents
SECTION 1
DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
A. Oven Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
B. Range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
C. Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
SECTION2
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
A. Inspection For Shipping Damage . . . . . . . . . . . . . 9
B. Installation of Oven Range . . . . . . . . . . . . . . . . . .10
C. Assembling of Oven Range. . . . . . . . . . . . . . . . . .11
D. Electrical Connection. . . . . . . . . . . . . . . . . . . . . . .11
E. Initially Cleaning the Griddle and/or Hot Plates. . .11
F. Testing the Installation. . . . . . . . . . . . . . . . . . . . . .12
G. Marine Oven Range Installation On Curb . . . . . . .12
H. Dimension Drawings . . . . . . . . . . . . . . . . . . . . . 13-14
SECTION 3
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
I. Component Function and Location . . . . . . . . . . . .15
II. Control Functions and Location. . . . . . . . . . . . . . .16
III. Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
IV. Time and Temperature Charts. . . . . . . . . . . . . . . .24
SECTION 4
PARTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Overall Drawing Parts List . . . . . . . . . . . . . . . . . . . . .30
Convection Oven . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Deck Oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Vents and Marine Rails. . . . . . . . . . . . . . . . . . . . . . . .38
SECTION 5
SCHEMATICS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Electrical Schematics & Wiring. . . . . . . . . . . . . . . . 41-83
ꢀꢀ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank
ꢀꢀꢀ
ꢀꢀꢀ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 1
DESCRIPTION
I. Description
Toastmaster Model RH36 and MH36 electric oven ranges are rated heavy duty for commercial use. The oven
range consists of a range top fastened to an oven base. There is a marine kit available which qualify it for
shipboard use. The marine features are an oven door latch, grease tray latch, bolt-down legs , range top
adjustable sea rails and a grab bar across the front.
A. OVEN BASE
the oven base can be either a deck oven or convection oven.
1. Deck Oven (“D” in Model #, example RH36D1)
The deck oven base has an aluminized steel inner lining, removable deck of rigidized steel, vent with
damper and fully gasketed landing shelf type stainless steel lined door. The oven is insulated on all
sides and is equipped with one slide-in rack. Heating is accomplished with top and bottom formed
tubular heating elements which are each controlled by a 3-heat (low, medium, high) switch. The deck
oven has a thermostatic control with a temperature range of 200oF to 550oF (93oC to 287oC). The
oven will preheat to 450oF (232oC) in 20 minutes.
2. Convection Oven (“A” in Model #, example RH36C1)
The convection oven has removable stainless steel oven liners, vent damper and fully gasketed
landing shelf type stainless steel lined door. The oven is insulated on all sides. Removable rack
supports can accommodate six racks. The heating element is enclosed in the side of the oven cavity
and encircles the oven blower fan. The convection oven has a thermostatic control with a
temperature range of 150oF to 450oF (65oC to 232oC). The oven will preheat to 450oF (232oC) in 15
minutes.
Figure 1-1
ꢁ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1 - Description
B. RANGE
The range can consist of up to 3 different components and the components can be configured in six
ways. Troughs with drip chutes are located at the front and rear for draining into two wide drawer type
receptacles
1. Range Components Descriptions
a. Griddle for griddling. The griddle can be either 24”x24” or 24” x 36”. The griddles are controlled by
thermostats. The 24”x24” griddle has a thermostat control for each of two 12”x24” zones and the 24”x
36” griddle has a thermostat for each of four 9”x24” zones. The griddle zones have a temperature
range of 150oF to 450oF (65oC to 232oC) and will preheat to 400oF (204oC) in 12 minutes.
Figure 1-2
Griddle
ꢂ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1 - Description
b. 12”x24” Hot Plate for stock pot cooking (Not recommended for griddling). The hot plates are thermo-
statically controlled and have a temperature range of 250oF to 850oF (121oC to 454oC) and will preheat to
400oF (204oC) in 12 minutes
Figure 1-3
Hot Plate
c. Round Hot Plate for stock pot cooking. The twin hot plates have a 9” diameter and are controlled by 3-
heat (low, medium, high) switches.
Figure 1-4
Round Hot Plate
ꢃ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1 - Description
2. Range Top Configurations
a. All purpose TOP RH36C1, RH36D1. The all purpose top consists of three 12”x 24” hot plates. The
all purpose top is not recommended for griddling
Figure 1-5
All Purpose Plate
b. Multi-Purpose Top RH36C2, RH36D2 The multi purpose top consists of two 12”x 24” hot plates
and two 9” round hot plates. The multipurpose top is not recommended for gridling.
Figure 1-6
Multi-Purpose Top
ꢄ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
c. Griddling Top RH36C3, RH36D3. the griddle top consists of one 36”x24” griddle plate.
Figure 1-7
Griddle Top
d. Round Hot Plate Top RH36C4, RH36D4. The round hot plate top consists of six 9” hot plates.
Figure 1-8
Round Hot Plate
ꢅ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1 - Description
e. Griddle/Round Hot Plate Top RH36C6, RH36D6. The griddle/round hot plate top consists of one
24”x24” griddle and two 9” round hot plates.
Figure 1-9
Griddle/Round Hot Plate
f. Griddle 12”x24” Hot Plate Top RH36C7, RH36D7. The griddle 12” x 24” hot plate top consists of
one 24” x24” griddle and one 12”x24” hot plate.
Figure 1-10
Griddle/Hot Plate
ꢆ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1 - Description
C. Specifications
OVEN RANGE MODELS
Overall Dimensions
SE36
Width
Depth
36” (91.5cm)
38-3/4” (96.4cm)
38-1/4” (97cm)
Height
Net Weight
Model RH36C1 & MH36C1
569 lb (258 kg)
515 lb (234 kg)
588 lb(267 kg)
455 lb (207 kg)
515 lb (234 kg)
545 lb (247 kg)
569 lb (258 kg)
515 lb (234 kg)
588 lb (267 kg)
497 lb (226 kg)
515 lb (234 kg)
545 lb (247 kg)
Model RH36C2 & MH36C2
Model RH36C3 & MH36C3
Model RH36C4 & MH36C4
Model RH36C6 & MH36C6
Model RH36C7 & MH36C7
Model RH36D1 & MH36D1
Model RH36D2 & MH36D2
Model RH36D3 & MH36D3
Model RH36D4 & MH36D4
Model RH36D6 & MH36D6
Model RH36D7 & MH36D7
Shipping Weight
Model RH36C1 & MH36C1
Model RH36C2 & MH36C2
Model RH36C3 & MH36C3
Model RH36C4 & MH36C4
Model RH36C6 & MH36C6
Model RH36C7 & MH36C7
Model RH36D1 & MH36D1
Model RH36D2 & MH36D2
Model RH36D3 & MH36D3
Model RH36D4 & MH36D4
Model RH36D6 & MH36D6
Model RH36D7 & MH36D7
610 lb (227 kg)
570 lb (259 kg)
610 lb(277 kg)
485 lb (220 kg)
570 lb (259 kg)
545 lb (247 kg)
569 lb (258 kg)
515 lb (234 kg)
588 lb (267 kg)
497 lb (226 kg)
515 lb (234 kg)
545 lb (247 kg)
Construction
Finish:
----------- Welded Angle Iron ----------
---------- Stainless Steel Front Sides and Top ----------
---------- Aluminized Steel Back ----------
Refer to Section 5
Electrical Specifications
NOTICE
Toastmaster (Manufacturer) reserves
the right to change specifications and
product design without notice. Such
revisions do not entitle the buyer to
corresponding changes, improvements,
additions or replacements for previously
purchased equipment.
ꢇ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1 - Description
NOTES
ꢈ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTꢀON ꢂ
1
INSTALLATION
A. Inspect for Shipping Damage
All shipping containers should be examined for damage before and during unloading. This equipment was
carefully inspected and packaged at the factory. the freight carrier has assumed responsibility for its safe
transit and delivery. If equipment is received in damaged condition, either apparent or concealed, a claim
must be made with the delivering carrier.
1. Apparent Damage or Loss - If damage or loss is apparent it must be noted on the freight bill or express
receipt at the time of delivery, and must be signed by the carrier’s agent (driver). If this is not done , the
carrier may refuse the claim. The carrier will supply the necessary claim forms.
2. Concealed Damage or Loss - If damage or loss is NOT apparent until after equipment is unpacked, a
request for inspection of concealed damage must be made with the carrier within 15 days. The carrier will
make an inspection and will supply necessary claim forms. Be certain to retain all contents plus external and
internal packaging materials for inspection.
ꢉ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2 - INSTALLATION
Figure 2-1
B. Inspect of Oven Range
The oven range can be shipped assembled or the range top module and the oven can be packed in separate
cartons. If the oven range is shipped assembled simply remove the metal banding straps and packing materi-
als and move it to the permanent location.
If the oven range is packed in two separate cartons and must be moved through a narrow passage follow the
Pre-Installation instructions located on the outside of the carton. If the oven range does not have to be moved
through a narrow doorway then simply remove the metal banding straps and packing materials and move
each carton to the permanent location. Use the following procedure to assemble the range top and oven
modules.
ꢁ0
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2 - INSTALLATION
C. Assembling (Stacking) the Oven Module and Range Module
1. Move the range top module and the oven module to the area of their permanent location as directed in the
previous Paragraph “B” or the Pre-installation Instructions on the outside of the shipping carton.
2. Remove the following (refer to Figure 2-1):
• Two drip pans
• Two side panels
• Back cover
• Front louvered panel located below control panel
3. Place range top module in position on oven module.
4. Attach range top to oven using two 5/16” hex bolts on each side of the oven (4 bolts total, furnished).
Refer to Figure 2-1
5. Thread jumper wire harness from range top through oven base frame opening and connect wires marked
201, 202 and 203 to terminal block as shown in Figure 2-1.
6. Remove all remaining packing materials.
7. On Marine Oven Ranges bolt the oven range to the floor/deck using the leg brackets.
D. Electrical Connection
1. Remove the right side panel and the front louvered panel located below the control panel if they have not
already been removed.
2. Remove knockout plate located below terminal block on oven floor as shown in Figure 2-1. Knockout
desired hole in knockout plate. Reassembled knockout plate to floor of oven.
3. Connect main power wires from circuit breaker to terminal block as shown in Figure 2-1.
4. Reinstall all panels and drip pans that were removed.
E. Initially Clean the Griddle and/or 12” x 24” Hot Plate(s)
1. Remove the rust preventative material from the surface with a nonflammable grease solvent.
2. Wash the surface with warm water and a mild detergent.
3. Rinse with a damp cloth and wipe dry.
4. Griddle must then be seasoned immediately. Refer to Section 3, Operation, for procedure to follow.
ꢁꢁ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2 - INSTALLATION
F. Testing the Installation
1. Turn all range and oven controls to the OFF position.
2. Turn main power disconnect switch to ON
3. Check range top components by turning on one control at a time starting at the left side of the control
panel. Check that the component is starting to heat and then turn it off.
4. Check the oven controls.
a. Deck oven - Set thermostat control at 300°F (149°C). turn both the upper and lower heating element
switches to LOW. Check that both the upper and lower elements are starting to heat and then turn them
to OFF.
b. Convection oven - Set thermostat control to 300°F(149°C). Push fan switch LOW position. Turn oven
power switch ON. After a few minutes open oven door and check for heat. If oven is heating turn all
controls to OFF
G. Marine Oven Range Installation on Curb
1. Installation of Oven Range on metal curb (shipped separately)
a. Bolt or weld base flange of metal curb (P/N33669) to floor of ship. See figure 2-2.
b. Position oven range on curb as shown in figure 2-3.
c. Remove oven side covers and use existing mounting holes to bolt oven range to top flange of curb.
2. Installation of Oven Range on existing curb.
a. Existing curb must be ventilated as shown on metal curb in Figure 2-3. The opening for circulation
must equal 8 square ft. (0.74 square meters).
b. Remove oven side covers and use existing mounting holes to bolt oven range to top of curb.
ꢁꢂ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2 - INSTALLATION
H. Dimension Drawings
Figure 2-4
ꢁꢃ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2 - INSTALLATION
Figure 2-5
ꢁꢄ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTꢀON ꢃ
OPERATION
I. COMPONENT FUNCTION AND LOCATION
A. OVEN BASE Module - either a convection oven or deck oven base.
Convection Oven heating element located on side of oven cavity with the blower fan.
Deck Oven has a heating element at both the top and bottom of the oven cavity.
B. OVEN CONTROL PANEL - All Oven operating controls and indicators.
C. RANGE TOP - Configured six different ways which consist of griddle, round hot plate, and/or 12” x
24” hot plate.
D. RANGE TOP CONTROL PANEL - Contains all operator controls for range top operation
E. GREASE TROUGHS - In front and behind the Range Top cooking surfaces. (Grease chutes
provide drainage into the grease drawers)
F. GREASE DRAWERS - Containers for grease draining through the grease chutes from grease
troughs.
G. VENT DAMPER CONTROL - Controls the amount of moisture that can be vented from the oven.
ꢁꢅ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - OPERATION
II. Control Functions and Locations
A. Convection Oven Control Panel
Figure 3-2
Convection Control Panel
1. Temperature Thermostat Control - adjustable from 150°F to 450°F(65°C to 232°C). The thermostat is
also provided with ON/OFF position. The oven will preheat to 450°F(232°C) in 15 minutes.
2. Heating Light - Amber light signals when oven is coming up to set temperature and heating element is
energized.
3. Power Switch - turns ON or OFF.
4. On Light - Green light signals when power is on.
5. Timer - Adjustable from 6 to 120 minutes.
6. Fan Switch - turns fan to LOW or HIGH speed and turns fan OFF. If fan switch is turned OFF the
heating element will not heat. Fan switch must be positioned in LOW or HIGH for oven to function.
7. Fuse Holders - Contains fuses.
ꢁꢆ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - OPERATION
B. Deck Oven Control Panel
Figure 3-3
Deck Control Panel
1. Temperature Thermostat Control - adjustable from 200°F to 500°F(93°C to 287°C). The thermostat is
also provided with ON/OFF position. The oven will preheat to 450°F(232°C) in 20 minutes.
2. Upper and Lower Heating Element Switches - are 3 position switches which adjust the heating
elements at low, medium or high. The heating element switches also have an OFF position.
3. Heating Light - Amber light signals when oven is coming up to set temperature and heating
element(s) is energized.
4. Timer - Adjustable from 6 to 120 minutes.
ꢁꢇ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - OPERATION
C. Range Top Controls
Figure 3-4
Range Top with Griddle Control
1. Griddle is controller by a Temperature Thermostat Control (see Figure 3-4) adjustable from 150°F to
450°F(65°C to 232°C). The griddle will preheat to 400°F(204°C) in 12 minutes. Adjacent green light
remains on while heating elements are energized and griddle is coming up to set temperature.
Griddles have independent heat zones each with its own heating element and temperature control. The
24” x 24” griddle has two 12” heat zones and the 24” x 36” griddle has four 9” heat zones.
2. 12” x 24” Hot Plate is controlled by a Temperature Thermostat Control (see Figure 3-5) adjustable from
250°F to 850°F (121°C to 455°C). The 12” x 24” hot plate will preheat to 400°F(204°C) in 12 minutes.
Adjacent green light remains on while heating elements are energized and griddle is coming up to set
temperature.
3. Round Hot Plate is controlled by a 3-heat switch. The switch positions are LOW, MEDIUM, HIGH and
OFF. Adjacent green light is always on while hot plate is on.
Figure 3-5
Range Top with Hot Plate Control
ꢁꢈ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - OPERATION
III. Operation
A. Convection Oven Operation
1. Set temperature control knob to the desired tenperature.
2. Push the oven power switch to the ON position.
3. Push the fan switch to the HIGH or LOW position. The LOW fan speed should be used for
delicate products or products with loose toppings such as pepperoni on a pizza. Use HIGH fan
speed for all other products that will not be affected by a fast air movement.
4. Allow oven to preheat to the set tmerpature. The amber signal light will remian on until the
temperature has been reached.
5. Place pans containing food products inot oven ans set timer for desired cook time. Refer to the
Time and Temperature Cahrts on the following pages for suggested cook times and tempera-
tures. When placing pans in oven do not block air flow on sides or in back of oven cavity.
Blocking the air flow can cuase uneven cooking.
Opening the oven door too often will also cause uneven cooking. Keep oven door closed except
for necessary checking of food products.
6. Flue vent damper should be opened when cooking high moisture content foods. Pull the flue
vent handle to open the vent damper.
7. When timer signal that cooking time has elapsed remove food product and turn power switch,
temperture control and fna switch to OFF.
8. CONVECTION OVEN CLEANING
a. At the end of the day’s operation be sure the oven is turned off.
b. Open the oven door and allow it to cool down.
c. Remove the oven racks.
d. Remove the oveb rack hangers by lifting up and off the screw studs holding them in place.
e. Remove the baffle surrounding the fan by removeing the three screws on the front and pulling the
baffle forward.
f. All racks, rack hangers and fan baffle can be washed in warm soapy water, rinsed and wiped dry.
g. Wash the blower wheel.
h. Using a stiff brush (not sire), clean the interiot of baked on food particles. Using a mild detergent
and damp sponge wipe down the inside of the oven and door. Rinse and wipe dry. If these proce-
dures are followed daily, it will prevent food particles from building up and creating hard to remove
stains. Do not use strong abrasives as they will scrathc the finish.
ꢁꢉ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - OPERATION
B. Deck Oven Operation
1. Set temperature control knob to the desired temperature.
2. Turn both Upper and Lower element switches to HIGH.
3. Allow oven to preheat to the set temperature. The amber signal light will remain on until the set tem-
perature has been reached.
4. After oven is preheated set Upper and Lower element switches to desired setting (LOW, MEDIUM or
HIGH).
When roasting, the nest results are obtained by using balanced heat with both the Upper and Lower
element switches on HIGH. A measured top heat provides excellent coloring and a caramelized finish
to the meats, but where a seared or browned appearance is not desired, as in roasting fowl, the upper
oven element switch should be set on MEDIUM, LOW or OFF.
5. Place pans containing food products into oven. For baking and roasting, pans should be placed on the
intermediate rack. When roasting and baking pans are on both the deck and the rack the pans should
be rotated halfway through the cooking cycle.
When placing pans in oven do not block air flow on sides or in back of oven cavity. Blocking the air
flow can cause uneven cooking.
Opening the oven door too often will also cause uneven cooking. Keep oven door closed except for
necessary checking of food products.
6. Set timer for desired cook time. Refer to the Time and Temperature charts on the following pages for
suggested cook times and temperatures.
7. Flue vent damper should be opened when cooking high moisture content foods. Pull the flue vent
handle to open the vent damper.
8. When the timer signals that cooking time has elapsed remove food product and turn temperature
control and Upper and Lower element switches to OFF.
9. DECK OVEN CLEANING
a. At the end of the day’s operation be sure the oven is turned OFF.
b. Open the oven door and allow it to cool down.
c. Remove the oven rack and the oven deck at the bottom of the oven.
d. Oven rack and deck can be washed in warm soapy water, rinsed and wiped dry.
e Using a stiff brush (not wire), clean the interior of baked on food particles. Using a mild detergent
and damp sponge wipe down the inside of the oven and the oven door. Rinse and wipe dry. If these
procedures are followed daily, it will prevent food particles from building up and creating hard to
remove stains. Do not use strong abrasives as they will scratch the finish.
ꢂ0
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - OPERATION
C. Griddle Operation
IMPORTANT: Do not turn griddle on before seasoning procedure has been completed.
IMPORTANT: If your griddle is new you must remove the rust preventative material before turning the
griddle on. Refer to Section 2, Installation, Paragraph E.
1. Griddle Seasoning Procedure.
a. Preheat the griddle to 300°F(149°C) and spread a light film of unsalted cooking oil or fat over the
surface with a soft cloth.
b. Allow griddle to stand this way for two minutes to give the oil an opportunity to work into the pores of
the metal and to form a smooth coating over the outside.
c. Wipe off excess oil and repeat Steps 1 and 2 at 350°F(175°C).
d. After the second step is complete wipe off excess cooking oil, set thermostat control knob for desired
temperature. The griddle is now ready for use.
2. Operating Hints and Safety
Although the finest materials, engineering and manufacturing facilities have provided for safety and
trouble -free operation, only proper use and maintenance will assure personnel safety and long life of the
equipment. The following are a few precautions and operating suggestions for use of the griddle.
a. Disconnect power to the griddle at the disconnect switch at the end of each day of operation.
b. Do not leave the griddle in operation without an attendant.
c. Turn thermostat dials down to 200°F(93°C) during idle periods. It takes only a few minutes to regain
operating temperatures.
d. Do not heat the entire griddle for cooking small amounts of food.
e. Various kinds of foods can be cooked at the same time by setting each section of the griddle at
different temperatures.
f. Use a spatula to push excess grease into troughs after each load of food is cooked. This will reduce
smoking of hot grease and carbonizing.
g. Do not leave griddle at high temperature when not in use or during idle periods. This will cause food
particles and grease film to carbonize.
3. Daily Griddle Operation and Maintenance.
Daily Pre-Operation
a. Season the griddle before operation daily, as described in Step 1 above.
b. Turn the temperature controls to the desired temperature and allow 15 minutes or preheat time
before loading griddle with food. Green signal light will remain on while heating elements are
energized and griddle is coming up to set temperature. This will allow time for the griddle surface to
be saturated with heat. Failure to allow sufficient preheat time will result in unsatisfactory cooking of
the first load. The following chart indicates cooking time and temperature for various type of food.
c. If a portion of the griddle is to be used for holding, then set the temperature controls for different
temperatures.
ꢂꢁ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - OPERATION
Daily Post Operations:
a. Cleaning the Griddle Surface
AA. Good cooking requires clean equipment. To provide evenly cooked and perfectly
browned foods, keep the griddle surface free fo carbonized grease. Carbonized grease
on the griddle surface hinders the transfer of heat from the griddle surface to the food.
This also results un spotty browning, decreased cooking efficiency, and worst of all,
carbonized brease tends to cling to the griddled foods, giving them a highly unsatisfac-
tory and unappetizinf appearance.
BB. At the end of each day of operation or at the end of each shirt, thoroughly clean the front
and rear grease troughs and the chutes into grease drawers.
CC. Clean the griddle surface woth a pumice or griddle stone by rubbing with the grain of the
metal while the griddle surface is still warm. Wipe griddle clean of residue from the
griddle stone.
b. Clening - Wipe down sides of griddle and all areas around griddle to keep them free of splashed
grease.
AA. Clean all surrounding surfaces of the griddle with warm water and a mild detergent daily.
BB. Rinse and wipe off excess water.
CC. Polish with a dry soft cloth.
NOTE: This simple treatment not only keeps the equipment dirt free and sparkling, it also
eliminates the danger of grease accumulation forming hard to remove stains.
c. Cleaning the grease drawer - Empty each gresae drawer as often as necessary, but they must be
emptied at the end of ech day of operation or the end of each shift. Also wash out grease drawers
with hot water and a mild detergent. Wipe dry and replace in range. NOTE: Marine ranges are
equipped with a grease drawer latch which must be held depressed as the grease drawers are
removed.
ꢂꢂ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - OPERATION
D. 12” x 24” Hot Plate Operation
IMPORTANT: If your hot plate is new you must remove the rust preventative material before turning
the griddle on. Refer to Section 2, Instalaltion, Paragraph E.
1. Turn the termperature controls to the desired temperature and allow 15 minutes of preheat timer
before using the hot plate. the green signal light will remain on while the heating elements are
eneergized and the hit plate is coming up to set temperature.
2. When hot plate is preheated place pots or vessels onto hot plate for cooking.
3. HOT PLATE CLEANING.
a. Wash range with warm soapy water, rinse and wipe dry.
b. Be sure to clean all surfaces around and on the hot plates.
c. Polish with a soft cloth.
E. Round Hot Plate Operation
1. Turn the 3-heat switch to LOW, MEDIUM or HIGH. Allow the hot plate to preheat for 10 minutes
and then place pots or vessels onto hot plate for cooking.
2. Green signal light will remian on until 3-heat switch is turned to the OFF position.
3. ROUND HOT PLATE CLEANING
a. Wash range with warm soapy water, rinse and wipe dry.
b. Be sure to clean all surfaces around and on the hot plates.
c. Polish with a soft dry cloth.
F. Marine Ranges
Marine ranges are provided with a full width grab bar, 6” marine bolt down legs, and oven door latch and sea
rails to prevent movement of pots on range top.
The range top sea rails may have to be repositioned when various size pots or vessels are used.
ꢂꢃ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - OPERATION
IV. Time and Temperature Charts
DECK OVEN BAKING TIME AND TEMPERATURE
TOP
SWITCH
BOTTOM
SWITCH
TIME IN
MINUTES
PRODUCT
Two Crust Pies
Open Face Pies
Pumpkin Pies
Custard Pies
Meringue Pie (Brown)
Pie Shells
TEMPERATURE
400F° - 425°F(204C° - 218°C)
400F° - 425°F(204C° - 218°C)
375°F - 400°F(190°C - 204°C)
375°F - 400°F(190°C - 204°C)
425°F - 450°F(218°C - 232°C)
400°F - 425°F(204°C - 218°C)
400°F - 425°F(204°C - 218°C)
375°F - 400°F(190°C - 204°C)
375°F - 400°F(190°C - 204°C)
375°F - 400°F(190°C - 204°C)
375°F - 400°F(190°C - 204°C)
375°F - 400°F(190°C - 204°C)
400°F - 425°F(204°C - 218°C)
400°F - 425°F(204°C - 218°C)
350°F - 375°F(176°C - 190°C)
350°F - 375°F(176°C - 190°C)
300°F - 325°F(149°C - 163°C)
325°F - 375°F(163°C - 190°C)
300°F - 325°F(149°C - 163°C)
Medium
Medium
Medium
Medium
High
High
40-60
35-50
35-50
35-50
5-6
High
Medium
Medium
Off
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Off
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Medium
Low
20-30
20-30
20-30
20-30
20-30
10-15
20-25
25-35
15-20
20-30
45-60
40-50
35-60
60-70
Parker House Rolls
Whole Wheat Rolls
Danish Rolls
Sweet Rolls
Kolacky
Tea Biscuits
Corn Bread
Cup Cakes
Layer Cakes
Loaf Cakes
Angel Food Cakes
Puddings
Medium
Medium
Low
Baked Apples
* Used when the crust and filling are baled as a unit. When the crust is pre-baked most bakers use a temperature
of approximately 300°F - 350°F(149°C - 176°C).
NOTE: The data in this chart is of a general nature and is suggested for use as a guide only. Experience will, of
course, dictate variations that best fit your baking requirement.
ꢂꢄ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - OPERATION
DECK OVEN ROASTING TIME AND TEMPERATURE
CONTROL
INTERNAL MEAT
MINUTES
PRODUCT
SETTING
TEMPERATURE
PER POUND
Beef
Standing Rib. 3 Rib. 6-8 Pounds
300°F(149°C)
Rare 140°F(60°C)
Med. 160°F(71°C)
20
25
Well 170°F(77°C)
30
Standing Rib. 7 Rib. 20-25 pounds
300°F(149°C)
Rare 125°F(52°C)
13
Med. 140°F(60°C)
15
Well 150°F(65°C)
17
Rolled Rib. 7 Rib. 16-18 pounds
Rump or Chuck. 8-23 pounds
Round Rump. shank off. 50 pounds
250°F(121°C)
300°F(149°C)
300°F(149°C)
Well 150°F(65°C)
140°F - 170°F(60°C - 77°C)
140°F - 170°F(60°C - 77°C)
25
20 - 30
12 - 16
Lamb
Leg. 7-8 pounds
Leg. 15-20 pounds
Shoulder
300°F(149°C)
300°F(149°C)
300°F(149°C)
300°F(149°C)
180°F(82°C)
160°F(71°C)
180°F(82°C)
30 - 35
20 - 30
40 - 45
30 - 35
Breast, Stuffed
175°F - 180°F(79°C - 82°C)
Pork
Ham Leg, 15 pounds
Ham Leg, 25 pounds
Ham Boned, 15 pounds
Loin
Boston Butt
Ham. Cured. 20 pounds
350°F(176°C)
350°F(176°C)
350°F(176°C)
350°F(176°C)
350°F(176°C)
300°F(149°C)
185°F(85°C)
185°F(85°C)
185°F(85°C)
185°F(85°C)
185°F(85°C)
160°F(71°C)
30 - 35
30 - 35
30 - 35
45 - 50
15 - 18
Veal
Leg. 16 pounds
Leg. 25 pounds
Shoulder. 15 pounds
Shoulder. Rolled. 15 pounds
Loin. 10 pounds
300°F(149°C)
300°F(149°C)
300°F(149°C)
300°F(149°C)
300°F(149°C)
170°F(77°C)
170°F(77°C)
170°F(77°C)
170°F(77°C)
170°F(77°C)
22
18 - 20
25
35 - 40
25 - 30
Fowl
Chicken. Dressed. 4-6 pounds
Duck. Dressed. 5-8 pounds
Turkey. Dressed. 14-19 pounds
Turkey. Dressed. 27-33 pounds
250°F - 300°F(121°C - 149°C)
300°F(149°C)
190°F(88°C)
190°F(88°C)
190°F(88°C)
190°F(88°C)
35 - 40
25 - 30
20 -25
15 - 20
300°F(149°C)
300°F(149°C)
NOTE: The above data is of general nature. Many factors such as size of bone, thickness of meat, temperature at
time of roasting, individual taste as to degree of doneness, seasoning, etc., must be taken into consideration. Pan
selection and cooking times will also be governed by total weight, number of pieces in load. Preheating for
roasting is unnecessary.
ꢂꢅ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - OPERATION
CONVECTION OVEN BAKING
TIME & TEMPERATURE
This chart provides recommended temperature and time settings plus a number of racks per oven for specific
food products. The times and temperature may, however, vary considerably due to weight of load, type of
utensils and recipe.
NO. OF
TEMP
TIME
PRODUCT
SIZE OF PAN
9” dia
RACKS YIELD
SETTING
SETTING
Frozen Berry Pies, 22 oz,
Frozen Fruit Pies, 46 oz
Frozen Apple Pies, 22 oz
Sheet Cake
3
3
3
3
3
2
3
3
3
3
2
3
5
3
3
3
3
2
2
3
18
12
18
3
350°F(176°C)
350°F(176°C)
350°-375°F(176°-190°C)
335°F(168°C)
335°F(168°C)
340°F(171°C)
300°F(149°C)
350°F(176°C)
400°F(204°C)
400°F(176°C)
350°F(176°C)
400°F(204°C)
400°F(204°C)
350°F(176°C)
350°F(176°C)
450°F(232°C)
350°F(176°C)
300°F(149°C)
325°F(163°C)
400°F(204°C)
34min
45-50min
25-30min
16-18min
25min
9” dia
9” dia
18” x 26”
18” x 26”
Corn Bread
3
Bread, 1lb Loaves
Sugar Cookies, 3” dia
Brownies
16
144
6
30min
18” x 26”
12” x 20” x 2”
5” dia
15min
15min
Beef Pot Pies, 5” dia
Turkey or Chicken Pot Pies
Stuffed Peppers
60
60
30-35min
30-35min
15-20min
8min
5” dia
Toasted Cheese Sandwiches 12” x 20”
90
144
75
Hamburger Patties, 5 per lb.
Chicken, Qtrs. (2-1/2lb avg)
Chicken Breast - Thigh
Individual Pizza (Frozen)
Halibut Steaks (5oz Frozen)
Rolled Roast Beef (20lb. Avg)
Meat Loaf
18” x 26”
18” x 26”
18” x 26”
5” dia
8-10min
30min
40min
60
90
80
5min
18” x 26”
20min
4 hours
40-45min
50min
Idaho Potatoes (8oz Avg)
20 per rack
60
ꢂꢆ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - OPERATION
GRIDDLE TIME AND TEMPERATURE
NOTE: All cooking times are approximate
CONTROL TIME ADVANCE
PRODUCT
SETTING
IN MINUTES
PREPARATIONS
Canadian Bacon
350°F(176°C)
3 - 4
Slice (not too far in advance as meat will
darken) - Split edges to prevent curling.
Hamburgers
350°F(176°C)
350°F(176°C)
375°F(190°)
3 - 4
3 -4
Prepare recipe - Form patties - Seperate
with waxed paper - Refrigerate.
Cheeseburgers
Corned Beef Patties
Sausage Patties
A hamburger patty plus melt a slice of
cheese on top just before serving.
3 - 4
3 - 4
Open both ends of can - Slide out
contents of can - Cut into 3/8” slices.
350°F(176°C)
Form patties - Seperate with waxed
paper - Refrigerate.
Sausage Links
Poatato Patties
350°F(176°C)
375°F(190°)
3
Refrigerate for best results.
3 - 4
Cook-Mash-Season-Form patties using
1/4 cup measure.
American Fries Potatoes
French Toast
375°F(190°)
400°F(204°C)
300°F(149°C)
375°F(190°)
3 - 4
4 -5
3 - 4
2
Cook - Slice - Season.
Prepare egg batter.
Prepare recipe
Scarmabled Eggs
Pancakes
Prepare recipe.
Frankfurters
375°F(190°)
400°F(204°C)
400°F(204°C)
400°F(204°C)
400°F(204°C)
375°F(190°)
2 - 5
3 - 4
3 - 5
10
Minute Steaks
Club Steaks
Ham Steaks
Beef Tenderloin
Boiled Ham
5 - 7
2
Bacon
350°F(176°C)
300°F(149°C)
300°F(149°C)
300°F(149°C)
6
Hard Fried Eggs
Sofr Fried Eggs
Sunny-Side Up Eggs
3
2
3
ꢂꢇ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3 - OPERATION
NOTES
ꢂꢈ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 4
PARTS LIST
Order parts by calling your
authorized Toastmaster Parts
Distributor, who has a complete
inventory of parts for all Toastmaster
equipment.
ꢂꢉ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4 - PARTS LIST
ꢃ0
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4 - PARTS LIST
RHꢃꢆ & MHꢃꢆ
OVERALL PARTS LꢀST
Description
Item
No
Item
No
Qty Part No
Qty Part No
Description
N2-7600083
12x24 PLATE CMPLT - RIGHT DRAIN 208V
12X24 PLATE CMPLT - RIGHT DRAIN 240V
12X24 PLATE CMPLT - RIGHT DRAIN 480V
12X24 PLATE CMPLT - LEFT DRAIN 208V
12X24 PLATE CMPLT - LEFT DRAIN 240V
12X24 PLATE CMPLT - LEFT DRAIN 480V
12X24 PLATE CMPLT - CENTER 208V
12X24 PLATE CMPLT - CENTER 240V
12X24 PLATE CMPLT - RIGHT DRAIN 480V
N2-20G1A32
36X24 GRIDDLE PLATE CMPLT 208V
N2-7600084
N2-7600086
N2-7600087
N2-7600088
N2-7600090
N2-7600074
N2-7600075
N2-7600077
26
1
N2-20G1A302 36X24 GRIDDLE PLATE CMPLT 240V
N2-20G1A306 36X24 GRIDDLE PLATE CMPLT 480V
27
28
1
4
N2-20G1A36
2T-3004257
36X24 GRIDDLE PLATE ONLY
THERMOSTAT
2R-2100059
2N-7D1E1
2N-7D1E29
T-STAT KNOB 150°F (66°C) - 450°F (232°C)
ELEMENT 208V
ELEMENT 240V
29
4
1
1
2N-7D1E28
N2-20G1A37
N2-20G1A38
ELEMENT 480V
30
31
32
33
34
35
36
37
4
4
ELEMENT CLAMP PLATE
ELEMENT BAFFLE
12X24 PLATE CMPLT - DRAIN BOTH SIDES
208V (USED ON MODELS RH36O7 & RH36D7)
N2-7601872
N2-7601873
N2-7601875
24 2C-F706A8802 WASHER 11/32 X 1-1/4
48 2C-F706A8807 HEX NUT, BRASS 1/4-20
24 2A-F706A8811 SPACER
12X24 PLATE CMPLT - DRAIN BOTH SIDES
240V (USED ON MODELS RH36O7 & RH36D7)
12X24 PLATE CMPLT - DRAIN BOTH SIDES
480V (USED ON MODELS RH36O7 & RH36D7)
28 2C-F706A8805 WASHER 1/4”
4
4
N2-7002270
1O-8500079
N2-7603538
N2-7603539
N2-7603541
N2-7603536
2T-3004257
2R-2100059
THERMOSTAT BULB CLAMP
INSULATION
1
2
1
N2-20XA1G1 12X24 PLATE ONLY DRAIN BOTH SIDES
2
3
4
N2-20A2G8
N2-20A2G9
2T-3004281
2R-2100094
12X24 PLATE ONLY RIGHT OR LEFT
12X24 PLATE ONLY CENTER
THERMOSTAT
24X24 GRIDDLE PLATE CMPLT 208V
24X24 GRIDDLE PLATE CMPLT 240V
24X24 GRIDDLE PLATE CMPLT 480V
24X24 GRIDDLE PLATE ONLY
THERMOSTAT
38
1
3
T-STAT KNOB 250°F (121°C) - 850°F (454°C)
39
40
41
1
2
4
2N-F706A8703 ELEMENT 208V
2N-F706A8731 ELEMENT 240V
2N-F706A8729 ELEMENT 480V
3
T-STAT KNOB 150°F (66°C) - 450°F (232°C)
N2-F706A1013 THERMOSTAT BULB CLAMP
2N-F706A8703 ELEMENT 208V
5
6
3
3
4
4
4
4
2
6
N2-20A2G1
1O-8500079
ELEMENT CLAMP PLATE
INSULATION
6
42
2
2N-F706A8731 ELEMENT 240V
7
N2-F706A107 BAFFLE
2N-F706A8729 ELEMENT 480V
8
2C-20A2G7
N2-20A2G6
2A-20A1G7
N2-34284
LATCH SCREW
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
4
N2-20A2G1
ELEMENT CLAMP PLATE
9
LATCH PLATE
26 2C-B301A8817 HEX NUT 1/4-20
20 2C-F706A8809 WASHER 1-1/4” OD
10
11
12
13
14
15
16
17
18
19
LATCH PIN
CLIP, RETAINING 12X24 HOTPLATE
KEY STRIP
8
2A-F706A8811 SPACER
N2-20A1G8
16 2C-F706A8805 WASHER 1/4”
N2-F706A1013 BULB CLAMP
2
2
1
1
1
1
1
1
1
1
2
1
1O-8500079
INSULATION
27 2C-F716A8803 CAP SCREW 1/4-20 X 3/8
30 2C-F706A8809 WASHER 1-1/4”
N2-F706A1017 BAFFLE
N2-33617
N2-33618
N2-32849
2E-30905
N2-33616
N2-7007442
WELDMENT, EXT. PANEL LEFT HAND
12 2C-2001184
STUD 1/4-20 X 1-5/8
WELDMENT, EXT. PANEL RIGHT HAND
REAR PANEL
12 2A-F706A8811 SPACER
30 2C-F706A8805 WASHER 1/4”
24 2C-F706A8807 HEX NUT 1/4-20, BRASS
TERMINAL BLOCK, 3-POLE
PLATE COVER
N2-34797
TWIN PLATE ASSEMBLY 208V, 2600W
KNOCKOUT PLATE
20 1/3 N2-33850
N2-34278
TWIN PLATE ASSEMBLY 240V, 2600W
TWIN PLATE ASSEMBLY 480V
N2-MALG06F KIT, MARINE LEG 6” SS ADJ.
N2-7007992
N2-7601840
N2-32691
ACCESS PANEL
2N-1132B8701 SOLID RND HEATING UNIT 208V ECO-2600W
GREASE DRAWER, HANDLE & ASSEMBLY
LATCH, MARINE
21 2/6 2N-1132B8703 SOLID RND HEATING UNIT 240V ECO-2600W
2N-34127
SOLID RND HEATING UNIT 480V ECO-2600W
TWIN PLATE PANEL
N2-34743
LATCH, GREASE DRAWER
RECIEVER FOR LATCH
DOOR BUSHING
22 1/3 N2-7610114
60
2
N2-34741
23 1/3 N2-1132B8901 RETAINER BAR MOUNTING BRACKET
61
62
2
4
2A-33621
24 2/6 N2-34285
25 1/3 N2-30999
RETAINING CLIP
BOTTOM. PLATE
N2-7610657
WELDMENT, SPOUT GREASE
ꢃꢁ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4 - PARTS LIST
RHꢃꢆ & MHꢃꢆ CONTꢀNUED
Item
No
63
Qty Part No
Description
4
1
1
2
1
2
4
2
2I-2700090
N2-33693
N2-32692
2A-34081
GASKET, SPOUT GREASE
ASSEMBLY, DOOR
64
65
66
67
68
69
70
PLATE, LATCH
SPACER, STEPPED - MARINE LATCH
ASSEMBLY, HANDLE DOOR
SPACER, DOOR & DRAWER HANDLE
HANDLE SCREWS 10/32 X 3-12
BLACK HANDLE PLUG
N2-32572
2A-3103164
2V-2000320
2V-3000058
2M-31795
DECAL RH36C3, RH36D3 CONTROL PANEL
2M-31796
DECAL RH36C4, RH36D4 CONTROL PANEL
DECAL RH36C2&C6, RH36D2&D6 CONTROL
PANEL
2M-31794
NI
--
DECAL RH36C1&C7, RH36D1&D7 CONTROL
PANEL
2M-31793
N2-30926
N2-31623
CONTROL PANEL RH36D4
CONTROL PANEL RH36C3
ꢃꢂ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4 - PARTS LIST
NOTES
ꢃꢃ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4 - PARTS LIST
ꢃꢄ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4 - PARTS LIST
RHꢃꢆ & MHꢃꢆ
CONVECTꢀON OVEN PARTS LꢀST
Item No
1
Qty
1
Part No
Description
2N-3027A8701
2N-3027A8711
2N-3027A8709
N2-3027A3083
N2-30919
2U-3002761
2R-3103902
N2-7610513
N2-3102541
2B-3102540
2E-30905
2E-28082-0010
2E-34401
2P-30368
2C-43685
N2-30369
2R-7007809
2A-30359
2C-3102937
2E-3003770
N2-32762
2I-34404
2E-30519
2E-32941
2R-33365
ELEMENT 6000W-208V
ELEMENT 6000W-240V
ELEMENT 6000W-480V
ELEMENT SUPPORT
MOTOR BLOWER & ASSEMBLY 240V-480V
BLOWER MOTOR ONLY 208V-240V
BLOWER WHEEL
ELEMENT COVER, BLOWER BAFFLE
SHELF ASSEMBLY
SIDE RACK
TERMINAL BLOCK, 3-POLE
TRANSFORMER 480V ONLY
CONTACTOR 208V-240V COIL
DOOR SPRING
EYE BOLT
CABLE ASSEMBLY
PULLEY
AXLE
RETAINER RING
MICRO SWITCH
MOTOR DUCT
MOTOR DUCT SEAL
HIGH LIMIT SENSOR
SWITCH 3HT
2
3
3A
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
4
1
1
1
1
3
2
1
1
1
1
1
1
1
1
2
1
1
1
1
AR
AR
KNOB SWITCH
2E-33413
2E-33414
2E-33415
2E-33417
2E-33418
2E-33419
2T-2662A8701
2R-A710E8771
2P-3004536
2R-2100088
2E-33436
SIGNAL LIGHT, GREEN 250V
SIGNAL LIGHT, AMBER 250V
SIGNAL LIGHT, WHITE 250V
SIGNAL LIGHT, GREEN 480V
SIGNAL LIGHT, AMBER 480V
SIGNAL LIGHT, WHITE 480V
THERMOSTAT, C.O. OVEN 150F (66C)-450F (232C)
THERMOSTAT KNOB, C.O. OVEN 150°F (66°C) - 450°F (232°C)
TIMER
23
AR
24
25
26
27
28
29
1
1
1
1
1
1
OVEN TIMER KNOB
SWITCH, ROCKER, DP/ST
SWITCH, ROCKER DP/DT
FUSE HOLDER ASSEMBLY 480V
FUSE HOLDER ASSEMBLY 240V
FUSE 240V-10A
FUSE 480V-10A
DECAL CONTROL PANEL (not shown)
BOLT
2E-33437
2E-1455A0341
2E-1455A0339
2E-1455A8793
2E-1455A8794
2M-91783
30
31
2
2
32
33
34
35
36
1
AR
AR
AR
AR
34700
3024A3141
18A1S-2
21176-0001
BUSHING
COTTER PIN
LOCK NUT
SUPPORTED BY SOUTHBEND
ꢃꢅ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4 - PARTS LIST
ꢃꢆ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4 - PARTS LIST
RHꢃꢆ & MHꢃꢆ
DECK OVEN PARTS LꢀST
Description
Item No Qty Part No
2N-3001761
INNER ELEMENT 1500W-208V
INNER ELEMENT 1500W-240V
INNER ELEMENT 1500W-480V
OUTER ELEMENT 1500W-208V
OUTER ELEMENT 1500W-240V
OUTER ELEMENT 1500W-480V
OVEN DECK
1
2
2N-3001762
2N-3001764
2N-3001765
2N-3001766
2N-3001768
N2-30692
2
2
3
4
5
6
7
1
1
1
1
1
1
1
1
1
2
N2-30372
OVEN SHELF
N2-3024A3217
2P-30368
GUARD THERMOSTAT BULB
SPRING, DOOR
2C-43685
N2-30369
2E-30905
EYEBOLT
CABLE ASSEMBLY
8
9
TERMINAL BLOCK, 3POLE
SHEAVE, 3/16 DIA. CABLE (PULLEY)
AXLE
10
11
12
13
14
2ER-7007809
2A-30359
2C-3102937
RETAINER RING
2/6 2E-32941
2/6 2R-33365
2E-33413
SWITCH 3HT
KNOB SWITCH
SIGNAL LIGHT, GREEN 250V
SIGNAL LIGHT, AMBER 250V
SIGNAL LIGHT, GREEN 480V
SIGNAL LIGHT, AMBER 480V
THERMOSTAT DECK OVEN
THERMOSTAT KNOB DECK OVEN 200°F-550°F
TIMER
KNOB, TIMER
SWITCH 3HT
2E-33414
2E-33417
15
AR
2E-33418
16
17
18
19
20
21
22
1
1
1
1
2
2
1
2T-3004238
2R-A710E8739
2P-3004536
2R-210088
2E-32941
2R-33365
2M-31784
KNOB SWITCH
DECAL CONTROL PANEL DECK OVEN
ꢃꢇ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4 - PARTS LIST
ꢃꢈ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4 - PARTS LIST
RHꢃꢆ & MHꢃꢆ
VENTS & MARꢀNE RAꢀLS PARTS LꢀST
Item No Qty
Part No
N2-33194
N2-33195
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
2
1
2
6
2
1
1
1
2
1
1
1
1
1
1
1
1
4
2
RAIL, SEA FRONT TO BACK LOOSE
RAIL, SEA LEFT TO RIGHT LOOSE
RAIL, SEA FIXED RIGHT LEFT
ANLE, SEA RAIL SECURITY
RAIL, SEA FIXED FRONT BACK
RAIL, HAND
BRACKET, RAIL LIT MARINE
BRACKET, RAIL RT MARINE
POST, SEEA RACKS
N2-20A2C77
N2-20A2C76
N2-20A2C75
N2-20A2C82
N2-7001408
N2-7001409
N2-7004267
2V-7000071
2R-2100053
N2-7610705
N2-30412
N2-30415
N2-32792
2A-2002305
2C-18A12
2C-2000552
2C-4113A8801
ROD, VENT RA
KNOB, VENT “T” PULL/OPEN
WELDMENT, FLAP VENT
WELDMENT, FLUE - OVEN SECTION
WELDMENT, FLUE - TOP SECTION
WELDMENT, FLUE - TOP SECTION
VENT KNOB PIN
COTTER PIN
SCREW 5/16-18 X 3/4
SCREW FHM 1/4-20 X 1/2
SCREW 5/16-18 X 7/16
LOCKWASHER 5/16
HEX NUT 5/16-18
16 2C-2281
16 2C-4039A8803
12 2C-1411D8815
1
N2-34518
STAINLESS STEEL LINER KIT
ꢃꢉ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 5
SCHEMATICS
ꢄ0
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢄꢁ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢄꢂ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
RH36D2 SCHEMATIC
208/240V
ꢄꢃ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢄꢄ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢄꢅ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢄꢆ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
RH36D4 SCHEMATIC
208/240V
ꢄꢇ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢄꢈ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
RH36D6 SCHEMATIC
208/240V
ꢄꢉ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢅ0
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢅꢁ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢅꢂ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢅꢃ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢅꢄ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢅꢅ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢅꢆ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢅꢇ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢅꢈ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
RH36C2 SCHEMATIC
208/240V
ꢅꢉ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢆ0
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
RH36C2 SCHEMATIC
480V
ꢆꢁ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢆꢂ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢆꢃ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢆꢄ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢆꢅ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢆꢆ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
RH36C4 SCHEMATIC
208/240V
ꢆꢇ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢆꢈ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
RH36C4 SCHEMATIC
480V
ꢆꢉ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢇ0
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
RH36C6 SCHEMATIC
208/240V
ꢇꢁ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢇꢂ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
RH36C6 SCHEMATIC
480V
ꢇꢃ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢇꢄ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢇꢅ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢇꢆ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢇꢇ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢇꢈ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢇꢉ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢈ0
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢈꢁ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5 - SCHEMATICS
ꢈꢂ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
This page intentionally left blank
ꢈꢃ
RH36 & MH36 INSTALLATION & OPERATIONS MANUAL 2M-1189333
Download from Www.Somanuals.com. All Manuals Search And Download.
STAR INTERNATIONAL HOLDINGS INC. COMPANY
Star - Holman - Lang - Wells - Bloomfield - Toastmaster
10 Sunnen Drive, St. Louis, MO 63143 U.S.A.
(800) 807-9054
(314) 781-2777
Parts & Service (800) 807-9054
Download from Www.Somanuals.com. All Manuals Search And Download.
|