Register your product at
W92 905-095025 NA
THANK YOU FOR PURCHASING YOUR TIMEX® WATCH.
EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years
from date of purchase for $5. You can pay with AMEX, Discover, Visa or
MasterCard by calling 1 800-448-4639 during normal business hours.
Payment must be made within 30 days of purchase. Name, address,
telephone number, purchase date, and 5-digit model number required.
You can also mail a check for $5 to: Timex Extended Warranty, P.O. Box
1676, Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your
Timex® watch. Your model may not have all of the features
described in this booklet.
START WATCH
Important: Set day and date first! Remove guard from crown and
push in. For screw-in setting crown, turn COUNTERCLOCKWISE to
loosen. Note: Crown can be located at 3 o’clock or 6 o’clock position.
SET TIME
Pull crown all the way out and turn to correct time. Push crown in to
restart. For screw-in setting crown, push crown in while turning
CLOCKWISE to tighten.
Watches with date: Note correct time of day (A.M. or P.M.) for proper
date function.
SET DAY
Pull crown to “middle” position and turn CLOCKWISE until correct day
appears. If day does not change, pull crown to “out” position and turn
CLOCKWISE or COUNTERCLOCKWISE through necessary number of
24 hour periods until correct day appears.
IN
MIDDLE
OUT
WED 14
WED 14
WED 14
SET DATE
Caution: Wearing or storing the watch with the crown in the “middle”
position will cause damage to the movement. Always return the crown
to the normal position, or if you wish to save the battery life while
storing the watch, in the “out” position.
The date function advances the date between the hours of 10 PM and
2 AM. Avoid setting the date during this time frame. If you attempt to set
the date during this time period, rotate the crown at a very slow rate to
avoid damaging the watch.
SET DATE QUICK-DATE® FEATURE
3-Position Crown: Pull crown to “MIDDLE” position and turn CLOCK-
WISE or COUNTERCLOCKWISE until correct date appears.
2-Position Crown: Pull crown to “OUT” position and turn CLOCKWISE
until date changes. Repeat until correct date appears. Adjust date when
month has less than 31 days. Push crown in when finished.
NOTE: Date may need to be manually
updated at the end of each month by
following above procedure (otherwise
14
it will continue to 39 and then roll
over to 00).
ROTATING TIME RING (OPTIONAL)
Position symbol ( L) at desired time
to start or end activity.
Tide ring
Elapsed ring
COMPASS DIRECTIONAL RING (OPTIONAL)
To get approximate compass reading, point hour hand
at sun. Adjust ring so S (South) is halfway between
hour hand and 12. Adjust every hour. Make sure hour
hand is always pointed towards the sun.
12
11
1
5
2
3
4
10
9
8
7
6
N
INDIGLO® NIGHT-LIGHT
Press button or crown to activate light. Electroluminescent technology used
in the INDIGLO® night-light illuminates entire watch face at night and in
low light conditions.
TACHYMETER
The tachymeter feature can be used to measure speed in miles per hour
(MPH), nautical miles per hour (knots) or kilometers per hour (KPH) using
the sweep second hand and the tachymeter scale. You need to know the
actual distance you are covering in miles or km. To prepare the watch to
use this feature, let the second hand reach the 12 o’clock position, and
pull the crown to the “OUT” position to stop the watch. As the object
passes the start line of your pre-determined distance, push the crown
to the “IN” position to start the second hand. As the object passes the
finish line of your pre-determined distance, pull the crown to the “OUT”
position to stop the second hand. Within the first minute, the second
hand will point to the rate for a one-mile (or one kilometer) course: if it
takes 45 seconds, the hand will point to 80 at that position – 80 MPH or
80 KPH. Any pre-determined distance longer than one-mile (or one kilo-
meter) will require the calculation to be adjusted for the actual distance.
Note: When you are finished using the tachymeter feature, you will need
to reset the watch to the correct time.
(continued on reverse)
Download from Www.Somanuals.com. All Manuals Search And Download.
|