W-153-US 896-095000
THANK YOU FOR PURCHASING YOUR TIMEX WATCH.
EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase
for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during
normal business hours. Payment must be made within 30 days of purchase. Name, address,
telephone number, purchase date, and 5-digit model number required. You can also mail a
check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your Timex watch.
Your m odel m ay not have all of the features described in this booklet.
GENERAL OP ERATION-FEATURES
➢ INDIGLO button turns on the INDIGLO® night-light for
three seconds.
START/
STOP
➢ MODE button cycles through Tim e of Day, Tim er,
Chrono, Recall and Alarm modes.
➢ START/STOP button activates Timer and Chronograph,
turns Alarm on/off, allows you to view day or month
from Time display, and changes value of digits when
setting different functions.
INDIGLO
MODE
LAP/
CLEAR/
SET
➢ LAP/CLEAR/SET button sets digits for Time, Alarm, and
Timer and records lap times in Chronograph mode.
Features include:
• Countdown timer with preset times to 1 hour and bargraph display of remaining time
• Chronograph with lap storage • Alarm with 5-minute backup • 12- or 24-hour time format
• Day-Date or Month-Date date format • Automatic Set Return displays Time of Day if no
button is pushed for 2-3 minutes in Set function.
S ETTING TIM E OF DAY, DATE AND ALARM
We’ve built setting reminders into the watch to simplify setting the Time of Day and Alarm, and
made them consistent – once you know how to set Time, you can set the Alarm.
Press and hold LAP/CLEAR/SET to begin; a message will appear reminding you to hold button.
After 2 seconds, you’ll see a series of reminders, showing you functions of MODE and
START/STOP buttons and a reminder to press LAP/CLEAR/SET button when done.
➢ Press START/STOP to change value of flashing number.
➢ Press MODE to move to next digit (or digits) to continue setting time and date.
➢ When done, press LAP/CLEAR/SET to save changes and exit.
Notes on Setting Tim e of Day, Date and Alarm
•
Pressing any key during reminder messages will cancel them and let you start setting the
watch.
•
•
During setting, the reminder arrows will pop-up to help you remember which buttons to press.
You can set the watch to display time in 24-hour format, sometimes called “military” or
“international” time. Press START/STOP to change between 12 HR and 24 HR.
You can set the date to display Month/Date or Day/Date. In regular Time mode (not Set
mode), press and hold START/STOP for 3 seconds to change between Month/Date and
Day/Date format.
•
•
Whenever you set the Alarm, it will automatically arm itself. Refer to the Alarm section for
more details.
US ING THE TIM ER
➢ Press MODE until TIMER appears.
➢ Press LAP/CLEAR/SET to select pre-set countdown times (15 and 30 sec, 1, 3, 5, 10, 15, 20,
25, 30, 45 min.; 1 hour). If set time is more than 30 minutes, a tone will sound at the half-
way point.
➢ Press START/STOP to start or stop Timer.
➢ While Timer is stopped, press LAP/CLEAR/SET to set it to zero.
➢ When Timer count reaches zero, a melody will sound. Pressing any button stops it. A bar-
graph of time remaining in countdown appears in the Time display whenever the Timer is
running.
US ING THE CHRONOGRAP H
➢ Press MODE until CHR appears.
➢ Press START/STOP to begin running Chrono, press again to stop or pause. Chrono continues
to run even if you exit the mode.
➢ To take a lap, while Chrono is running, press LAP/CLEAR/SET. Lap time will appear frozen
for 10 seconds. Chrono will then return to overall running time.
➢ To clear Chrono to zero, with Chrono stopped, press and hold LAP/CLEAR/SET for
3 seconds.
RECALLING S TORED LAP S
➢ Press MODE until RCL appears.
➢ Total workout time will be displayed.
➢ Press START/STOP to scroll through stored laps.
➢ Stored laps will be cleared when Chrono is reset and started again.
US ING THE ALARM
➢ Press MODE until ALARM appears.
➢ Press LAP/CLEAR/SET to begin setting . Instructions for setting Alarm can be found above
in “Setting the Time of Day, Date and Alarm”.
➢ In regular Alarm mode (not Set mode), press START/STOP to turn Alarm feature on and off.
Display will show “ON” or “OFF” to right of Alarm minutes. If Alarm is “ON”, it will generate
a melody when Time of Day is the same as the Alarm time. As a reminder, when the Alarm
is ON, an Alarm clock symbol will appear to the left of the date while in Tim e of Day.
➢ Alarm melody will sound for 20 seconds, but can be stopped by pressing any button. If it is
allowed to sound for the full 20 seconds, a backup alarm will automatically sound after 5
more minutes, much like a snooze feature.
Download from Www.Somanuals.com. All Manuals Search And Download.
|