Register your product at
W-210 688-095000 NA
THANK YOU FOR PURCHASING YOUR TIMEX® WATCH.
EXTENDED WARRANTY
Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase for $5. You
can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during normal business hours.
Payment must be made within 30 days of purchase. Name, address, telephone number, purchase date,
and 5-digit model number required. You can also mail a check for $5 to: Timex Extended Warranty,
P.O. Box 1676, Dept. EF, Little Rock, AR 72203.
Please read instructions carefully to understand how to operate your Timex® watch. Your model may
not have all of the features described in this booklet.
FEATURES AND BASIC OPERATION
•
•
•
•
•
•
•
•
•
•
Time with 12- or 24-hour format
Date with MM-DD or DD.MM format
3 time zones
Optional hourly chime
100-hour chronograph with memory for 50 laps/splits
24-hour countdown timer (count down and stop or repeat)
3 daily/weekday/weekend alarms with 5-minute backup
Customizable mode set
INDIGLO® night-light with NIGHT-MODE® feature
Solar cell and rechargeable battery
Watch includes a built-in solar cell that charges the battery. Expose watch to bright sunlight or
fluorescent light to charge the battery prior to use. See CHARGING BATTERY section below.
Press MODE repeatedly to step through modes: Chrono, Timer, Alarm 1, Alarm 2, and Alarm 3. Press
MODE to exit current mode and return to Time mode.
SET·RECALL
INDIGLO® NIGHT-LIGHT
(DONE)
CHR
TMR
OCC
GOLF ALM
1
2
3
STOP·RESET
(–)
MODE
(NEXT)
START·SPLIT
(+)
Button functions shown with secondary functions in parentheses
TIME
To set time, date, and options:
1) With time and date showing, press and hold SET·RECALL.
2) Current time zone (1, 2, or 3) flashes. Press + or – to select time zone to set, if desired.
3) Press NEXT. Hour flashes. Press + or – to change hour (including AM/PM); hold button to scan values
4) Press NEXT. Minutes flash. Press + or – to change minutes
5) Press NEXT. Seconds flash. Press + or – to set seconds to zero.
6) Press NEXT. Month flashes. Press + or – to change month.
7) Press NEXT. Day flashes. Press + or – to change day.
8) Press NEXT. Year flashes. Press + or – to change year.
9) Press NEXT to set options. Press + or – to change value and then press NEXT to go to next option.
Press DONE at any step to exit and save settings. Available options are 12- or 24-hour time format,
MM-DD or DD.MM date format, hourly chime N, beep for button presses, mode customization (Select
“HIDE” for unwanted modes – they are removed from mode sequence – Select “ON” to view a mode).
Press START·SPLIT once and hold to see 2nd time zone. Press START·SPLIT twice and hold to see third
time zone. Continue to hold button for 4 seconds to switch to displayed time zone.
CHRONOGRAPH
This mode provides a chronograph (stopwatch) function. Press MODE to go to Chrono mode.
To start, press START·SPLIT. Chrono counts up by hundredths of a second up to one hour, then by
seconds up to 100 hours. Stopwatch icon wflashes to indicate chrono is running.
To stop, press STOP·RESET. Stopwatch icon wfreezes to indicate chrono is stopped.
To resume, press START·SPLIT, or to reset (clear) chrono, press and hold STOP·RESET.
Chrono continues to run if you exit mode. Stopwatch icon wappears in TIME mode.
While chrono is running, press START·SPLIT to take a split. Lap and split times will be displayed with lap
number.
If feature available, to recall split times during or after workout, press SET·RECALL. Then, press + or – to
step through splits. Press DONE to exit.
Lap and split times are stored in memory until a new workout is started (chrono started from zero).
LAP 1 = 7.11
LAP 2 = 7.50
LAP 3 = 7.08
LAP 4 = 7.30
SPLIT 1 = 7.11
SPLIT 2 = 15.01
SPLIT 3 = 22.09
SPLIT 4 = 29.39
To set display format, press SET·RECALL. Then, press + or – to select desired format. Press DONE to exit.
NOTES:
• When a split is taken, times are frozen on the display for 10 seconds. Press MODE to release display
and show running chrono immediately.
• Press NEXT to switch between recall and format setting.
TIMER
Timer mode provides a countdown timer with alert. Press MODE repeatedly until TIMER appears.
To set countdown time:
1) Press SET·RECALL. Hours flash. Press + or – to change hours; hold button to scan values.
2) Press NEXT. Minutes flash. Press + or – to change minutes.
3) Press NEXT. Seconds flash. Press + or – to change seconds.
4) Press NEXT. Action at end of countdown flashes. Press + or –
to select STOP or REPEAT, indicated by hourglass icon with arrow h.
5) Press DONE at any step when done setting.
To start timer, press START·SPLIT. Timer counts down every second from countdown time. Hourglass icon
Hflashes to indicate timer is running.
To pause countdown, press STOP·RESET. Hourglass icon H freezes to indicate timer is stopped.
To resume countdown, press START·SPLIT, or to reset countdown, press STOP·RESET.
Watch beeps and night-light flashes when countdown ends (timer reaches zero). Press any button to
silence. If REPEAT AT END selected, timer repeats countdown indefinitely.
Timer continues to run if you exit mode. Hourglass icon Happears in Time mode.
ALARM
The watch has three alarms. Press MODE repeatedly until ALM 1, ALM 2, or ALM 3 appears.
To set alarm:
1) Press SET·RECALL. Hour flashes. Press + or – to change hour; hold button to scan values.
2) Press NEXT. Minutes flash. Press + or – to change minutes.
3) Press NEXT. AM/PM flashes if in 12-hour time format. Press
+ or – to change.
4) Press NEXT. Alarm day setting flashes. Press + or – to select DAILY, WKDAYS, or WKENDS.
5) Press DONE at any step when done setting.
To turn alarm on/off, press START·SPLIT.
When alarm sounds, night-light flashes. Press any button to silence. If no button is pressed, alarm will
sound for 20 seconds.
If alarm is not acknowledged alarm icon will blink and alarm will sound again in 5 minutes.
Each of the three alarms has a different alert melody.
Alarm clock icon aappears when alarm is on in this mode and in Time mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
|