Download from Www.Somanuals.com. All Manuals Search And Download.
TIMEX is a registered trademark of Timex Corporation. ©2003 Timex Corporation.
How It Works
The Speed and Distance Monitor
uses information from 24 GPS
satellites to accurately and
The Timex® Speed and Distance Watch receives and displays your speed
and distance right on your watch.
continuously calculate your speed
and distance. That information is
then transmitted to the Timex®
Speed & Distance Watch.
Speed and Distance
Transceiver
Timex® Speed and
Distance Watch
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Sport Watch Features
All by itself, this is a great sport watch with:
• Time and date
• Month, day and date display
• Hourly chime
Speed and Distance System Features
When you add the Speed and Distance Transceiver, you have so
much more:
• Speed — View your current Speed, Average Speed and
Maximum Speed
• Distance — Measure your Workout Distance
• Pace — Monitor your real-time Pace, Average Pace and
Best Pace
• 12- or 24-hour format
• Two time zones
Chronograph
• Odometer — Have your very own Odometer
• 50- or 100-lap memory
• View lap and split times
• Memory recall
• Automatic Time Correction — GPS adjusts Time of Day
for accuracy
Useful Applications of the Speed and
Distance System
Countdown Timer
• Countdown timer with stop, repeat or start chronograph at end
• Time of Day and Monitor modes: See speed and
distance data that tracks your total travel
Alarm
• Chrono: View Speed and Distance for an event
you time
• Separate daily, weekday and weekend alarms
• 5-minute backup alarm
• Timer: View Speed and Distance data that accumulates
for the duration of the Timer
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
A True Multi-Sport System
The Timex® Speed and Distance System can be used to enhance your
enjoyment of a wide variety of outdoor sports including:
The Buttons: Watch
• Running
• Walking
• Hiking
• Paddling
• Boating
• Biking
• In-line skating
• Ice skating
• Skiing
• Soccer
• Horseback riding
• …and more!
INDIGLO
START/STOP
OR
STOP/RESET
• Sailing
SET
MODE
SPEED/DISTANCE
DISPLAY
SPLIT/RESET
SET
OR START/SPLIT
NOTE: Button positions/labels may vary according to watch model.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Operating the Speed & Distance Watch
Displaying Speed + Distance Data
Press the SPEED/DISTANCE DISPLAY button while standing 6 feet from
other users of this system to begin displaying data. The watch will display
a wave symbol in the upper left part of the watch display. If the Transceiver
is still searching for satellites, the watch shows SEARCHING. Once the
search is complete you can use the Speed and Distance features of the
watch.
Push MODE to scroll through the following modes in this order:
Time of Day • Chronograph • Chronograph Recall • Countdown Timer
• Speed and Distance Monitor • Odometer • Alarm • Options
Automatic Time Correction and Setting:
If the watch is receiving GPS data from the transmitter, the system
automatically corrects the time and sets the date based on the highly
accurate time used by the GPS satellites.
• If you have never set the time on the watch, the system will set the watch
to UTC (Greenwich Mean Time).
• If you have set the time before first using the Transceiver, it will change
your time to UTC time. You may then need to adjust for your time zone.
• If you have adjusted the time since using the Transceiver, the system will
maintain your adjustment and only correct itself for time it has drifted
since you last used the Transceiver. (For example, if you set your watch
five minutes fast, the system will adjust the time so it is exactly five
minutes fast.)
In Time, Chronograph, Timer, and Monitor modes, press SPEED/
DISTANCE DISPLAY button repetitively to view information in this order:
SPEED (current), AVERAGE SPEED, MAXIMUM SPEED, PACE, AVERAGE
PACE, BEST PACE, DISTANCE.
Information in each mode is accumulated independently.
You can manually turn off Speed and Distance data by holding down the
SPEED/DISTANCE DISPLAY button for 2 seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
9
To Set or Adjust Time Zone 1:
Chrono Mode (Chronograph or Stopwatch)
A. Press SET. Hold to Set appears.
B. Continue holding until Set Time appears. Hours will begin flashing.
Press START to advance the flashing digits.
C. Press MODE to set (in order): MINUTES; DAY OF THE WEEK; MONTH;
DATE; 12- OR 24-HOUR FORMAT; HOURLY BEEP ON/OFF; BUTTON
BEEP WHEN PRESSED ON/OFF. The selected item will flash. Press
START to change. In 12-hour format, go through 24 hours to change
from AM to PM.
The Chronograph (Chrono) will
time events up to 100 hours. It will
store to memory the lap number,
lap time, split time, average speed,
average pace and distance for each
lap taken.
A lap time is the time for a segment
of an event. A split time is the total
time from the beginning of an
event.
D. Press SET to save changes and exit Set Time.
To Change Time Zone Display:
A. Press START to view Time Zone 2 display. Release the button if you
only want to peek at Time Zone 2.
B. Press and hold START for 6 seconds and Time Zone 2 becomes primary
display.
C. Follow steps A through D above to set Time Zone 2.
NOTE: Seconds cannot be manually changed.
Data displayed in CHRONO mode for Average Speed, Maximum Speed,
Average Pace, Best Pace and Distance are based only on information
received since the chrono was started.
You can go to other modes while the Chronograph is running. In the Time
display, a stopwatch symbol will appear on the display to indicate the
Chrono is running.
A. Press START to begin timing.
B. Press STOP to stop timing.
C. Press START to resume timing OR
D. With Chrono stopped, press and hold RESET to reset display to zero.
To View Time of Day and Speed and Distance:
With the Transceiver functioning and while six feet from other people, press
SPEED/DISTANCE DISPLAY button to begin displaying data. Press it
repeatedly to select the data to view.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
11
Split or Lap Timing
Recall Mode
Note. The Display can show either
Lap or Split time. Press STOP with
chrono reset to choose lap or split
display.
A. Press START to begin timing.
During the timing of a lap, the
upper part of the display can show
speed and distance data if the
Transceiver is operating.
Chrono Recall allows you to review stored lap information while the Chrono
is running or stopped.
B. Press SPLIT to store LAP and SPLIT. The main display freezes while the
watch continues timing the next segment. After 10 seconds the Lap or
Split time is again shown in the main display. If the watch is set to show
speed or pace, then the average value for the current lap is displayed
during the hold period and AV appears in the display.
A. In Recall mode, press STOP repeatedly to display, in order, Average
Speed, Average Pace, Distance and Lap and Split times for the first lap.
Lap time appears in upper line of display. The lap number display has an
R in front of it to indicate recall. Continue to press STOP to display
information for successive laps until the final lap. Press START to go
back to previous display.
B. If no speed and data information was recorded for a lap, then only the
lap time (in upper line of display) and split time are displayed.
C. Press MODE button at any time to return to Time mode.
C. Press SPLIT again to store another lap. With the 50-Lap model, if you
take more than 50 laps the watch will display the lap count up to 99 laps
and store information from the last 50 laps to the watch’s memory.
D. At any time, press SPEED/DISTANCE DISPLAY to cycle though time and
distance information that is displayed in upper line during timing.
D. To rapidly scroll through multiple laps, press and hold STOP or START.
E. Press STOP to end timing. The display will show either final lap time or
final event time.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
13
Timer Mode (Countdown Timer)
D. Press MODE to view options for end of countdown (stop, repeat, start
Chrono). Press START to select action.
The Timer will count down from a set length of time up to 100 hours.
At the end of the countdown, the Timer will optionally a) Stop at End,
b) Repeat at End or c) Stop and Start the Chronograph (Chrono must be
reset). It will also display selected speed or distance information for the
timed interval.
E. Press SET to save changes and exit SET mode.
F. Press SPEED/DISTANCE DISPLAY button to cycle through type of speed
and distance information to be displayed in upper row of Timer.
Timer Operation:
A. Press START to start Timer. Original time or speed and distance will be
shown in upper display, while remaining time will be shown in main
display.
B. Press STOP to stop Timer. Press START to resume or RESET to reset to
original setting.
OR
At the conclusion of the timed period, the watch will play alert melody,
INDIGLO® will flash, and timer display will appear in any other watch mode
for 10 seconds. The speed or distance information is displayed if watch is
receiving data. Display will then return to original mode and Timer is reset.
Setting the Timer:
A. In Timer mode, press SET button. The TENS OF HOURS value will flash.
Pressing any button during the 10 seconds silences the alert and resets
timer.
Press START to increase setting.
B. Press MODE. HOURS display will flash. Press START to increase setting.
When the Timer is running, an hourglass icon will appear on the display in
Time of Day Mode.
C. Repeat for minutes and seconds.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
15
Monitor Mode
Odometer Mode
In this mode you can view both speed and distance information as you
travel while the GPS receiver is receiving data. Entering this mode
automatically activates the receiver.
The watch keeps track of total distance received by the watch when the
Transceiver is functioning for up to 10,000 miles or kilometers.
In Odometer mode, press and hold RESET to clear accumulated data back
to zero.
A. While in Monitor Mode, press SPEED/DISTANCE DISPLAY button to
select SPEED, AVERAGE SPEED, MAXIMUM SPEED, PACE, AVERAGE
PACE, BEST PACE, and GPS BATTERY LEVEL. Current speed, pace and
GPS battery level are available only if receiver is active.
The last choice displayed will be selected and the information will appear in
upper line of Monitor. Main display will show distance traveled.
B. Press START to pause data accumulation.
C. To clear accumulated data, press and hold RESET.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
17
Alarm Mode
Options Mode
The watch has a variety of options
designed to make the Speed and
Distance System more useful.
You can set the alarm for every
day, for only weekdays, or for
only weekends. The alarm will
operate for whichever Time Zone
In Options Mode, press
SPEED/DISTANCE DISPLAY to
review the option settings.
is selected as the primary time
display. At the set time, the alarm
tone will sound for 20 seconds,
To adjust non-numeric options (like
On/Off, Units, Speed or Pace, etc.),
you can simply press START to choose the correct setting.
INDIGLO® display will flash, and
the alarm display will pop up for
20 seconds. If no action is taken, a backup alarm will sound 5 minutes
later. When the alarm sounds, pressing any button will silence the alarm.
To change numeric settings:
1. Press and hold SET to start the set sequence. The value (or some part of
A. In Alarm mode, press SET. The HOURS value will flash.
B. Press START to change the flashing display.
C. Press MODE to change TENS OF MINUTES, then again to set MINUTES,
and again to set Alarm type (Daily, Weekday or Weekend).
it) will begin to flash.
2. Press START to set the flashing value, and use MODE to select the next
digit. Note that some options only have one setting or digit, so MODE
does nothing.
D. Press SET to save and exit Set Alarm mode.
3. When you are done setting, press SET to save the changes and exit
setting.
Alarm ON or OFF Setting:
SMOOTHING – This feature makes pace and speed values easier to read
while using the watch by “smoothing” out any small variations in speed.
You might want to enable this feature if you are viewing pace information
and the displayed numbers appear too “jumpy.” Smoothing has no effect
on the accuracy of the data displayed, nor any effect on the distance
accumulated.
In Alarm mode, press START to turn alarm ON or OFF. When Alarm is ON,
an alarm clock icon appears on the watch display in Time of Day Mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
19
UNITS – Choose to have the watch display distance and pace based in
Miles, Kilometers (KM) or Nautical Miles (NM). For Nautical Miles, speed
will be displayed in knots (KTs). (Knot=one Nautical Mile per hour).
System Messages
The Timex® Speed and Distance System is a sophisticated system. During
operation messages on the watch will help you maximize the system’s
performance.
ZONE ALERTS (Speed or Pace) – This feature is only available on the
100-Lap model.
SEARCHING – The GPS Transceiver has just been turned on and is search-
ing the sky trying to acquire signals from enough satellites to function
accurately. If the watch displays SEARCHING for too long, try moving to a
more open outdoor area, move away from metal objects, or try new batteries.
ZONE ALERTS will sound if you are outside a zone defined by a minimum
and maximum value for speed or pace (one or the other, not both
simultaneously). You may also turn this feature off.
DISTANCE ALERTS – This Feature is only available on the 100-Lap model.
WEAK GPS SIGNAL – The GPS Transceiver is losing its signals from the
satellites. Move to an area that is more open and free of metal objects.
DISTANCE ALERTS allow you to have the watch alert you when you have
traveled a set distance value. Note that this alert will sound only if the
Chronograph is running and the watch is receiving speed and distance
information form the Transceiver. The alert repeats until it is turned off.
If the signal is weak or totally lost for short periods of time, the system has
a technique to maintain reliable speed and distance information.
To conserve battery power, the Transceiver will shut off if it does not detect
any movement or cannot acquire satellites after 15 minutes.
INDIGLO® night-light
Press INDIGLO button to activate light.
RADIO LINK BROKEN – The watch is no longer receiving any speed and
distance data from the Transceiver over the radio link. Check to make sure
that the Transceiver is powered up and that the watch is not more than 1
meter (about 3 feet) away from it.
Electroluminescent technology used in the
INDIGLO night-light illuminates entire watch face at night and in low light
conditions. Press and hold INDIGLO button for 3 seconds, until watch
beeps, to activate NIGHT-MODE®. Once
activated, any button pushed will cause the INDIGLO night-light to stay on
for 3 seconds. NIGHT-MODE will stay activated for 3 hours or until you
deactivate it by pressing and holding INDIGLO button again for 3 seconds.
RADIO LINK NOISY – The watch is having difficulty receiving speed and
distance data. Make sure the watch is within 1 meter of the Transceiver.
Move away from sources of electrical interference like power lines, motors,
exercise equipment, etc. Change the orientation of the Transceiver from
vertical to horizontal or vise versa.
FATAL GPS ERROR – The GPS Transceiver is damaged. Contact Timex
customer service.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
21
Water-Resistance
TIMEX INTERNATIONAL WARRANTY
Your 50 Meter Water-Resistant watch withstands water pressure up to
86 p.s.i. (equals immersion to 164 feet or 50 meters below sea level).
(U.S. – LIMITED WARRANTY)
Your TIMEX® product is warranted against manufacturing defects by Timex
Corporation for a period of ONE YEAR from the original purchase date.
Timex and its worldwide affiliates will honor this International Warranty.
WARNING: THIS UNIT WILL NOT DISPLAY SPEED AND DISTANCE WHEN
OPERATED UNDER WATER.
WARNING: TO MAINTAIN WATER RESISTANCE, DO NOT PRESS ANY
BUTTONS UNDER WATER.
Please note that Timex may, at its option, repair your product by installing new
or thoroughly reconditioned and inspected components or replace it with
an identical or similar model. IMPORTANT – PLEASE NOTE THAT THIS
WARRANTY DOES NOT COVER DEFECTS OR DAMAGES TO YOUR PRODUCT:
1) after the warranty period expires;
2) if the product was not originally purchased from an authorized Timex retailer;
3) from repair services not performed by Timex;
4) from accidents, tampering or abuse; and
1.Watch is water-resistant only as long as lens, pushbuttons and case
remain intact.
2.Even though the watch may be water-resistant to a significant depth (100
or 200 meters), it is not a diver watch and should not be used for diving.
3.Timex recommends rinsing your watch with fresh water after exposure to
salt water.
5) lens or crystal, strap or band, watch or Transceiver case, attachments or
battery. Timex may charge you for replacing any of these parts.
Watch Battery Replacement
THIS WARRANTY AND THE REMEDIES CONTAINED HEREIN ARE
EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR PARTICULAR PURPOSE. TIMEX IS NOT LIABLE FOR ANY
SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some countries
and states do not allow limitations on implied warranties and do not allow
exclusions or limitations on damages, so these limitations may not apply to
you. This warranty gives you specific legal rights and you may also have
other rights which vary from country to country and state to state.
To avoid the possibility of permanently damaging the watch, TIMEX STRONGLY
RECOMMENDS TAKING YOUR WATCH TO A LOCAL RETAILER OR JEWELER
TO HAVE THE BATTERY REPLACED. After battery replacement, a DEMO mode
will appear after TIME OF DAY mode. This mode is used to demonstrate
features at point-of-sale and will disappear once TIME OF DAY has been set.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
23
To obtain warranty service, please return your watch and Transceiver to
Timex, one of its affiliates or the Timex retailer where the product was
purchased, together with a completed original Product Repair Coupon or, in
the U.S. and Canada only, the completed original Product Repair Coupon or
a written statement identifying your name, address, telephone number and
date and place of purchase. Please include the following with your watch
and Transceiver to cover postage and handling (this is not a repair charge):
a US$ 7.50 check or money order in the U.S.; a CAN$6.00 cheque or money
order in Canada; and a UK£ 2.50 cheque or money order in the U.K. In other
countries, Timex will charge you for postage and handling. NEVER INCLUDE
A SPECIAL WATCHBAND OR ANY OTHER ARTICLE OF PERSONAL VALUE
IN YOUR SHIPMENT.
TIMEX INTERNATIONAL WARRANTY — WATCH REPAIR COUPON
Original Purchase Date:
(Attach copy of sales receipt, if available)
Purchased by:
(Name, address and telephone number)
Place of Purchase:
(Name and address)
Reason for Return:
For the U.S., please call 1-800-448-4639 for additional warranty information.
For Canada, call 1-800-263-0981. For Brazil, call 0800-168787. For Mexico,
call 01-800-01-060-00. For Central America, the Caribbean, Bermuda and the
Bahamas, call (501) 370-5775 (U.S.). For Asia, call 852-2815-0091. For the
U.K., call 44 208 687 9620. For Portugal, call 351 212 946 017. For France,
call 33 3 81 63 42 00. For Germany, call +43 662 88 92130. For the Middle
East and Africa, call 971-4-310850. For other areas, please contact your local
Timex retailer or Timex distributor for warranty information.
THIS IS YOUR WATCH REPAIR COUPON. PLEASE KEEP IT IN A SECURE PLACE.
Download from Www.Somanuals.com. All Manuals Search And Download.
24
25
FCC Notice (U.S.) / IC Notice (Canada)
Product Name:
Watch Receivers – HRM/Speed+Distance Series M8xx/M5xx
Data Recorders – HRM/Speed+Distance Series M5xx
Timex Corporation declares that the following products, which include all
components of the Timex Bodylink System, are compliant to the relevant
FCC Part 15 and Industry Canada rules for Class B devices as follows:
Product Type: Unintentional Radiator
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not used in accordance with the
instruction manual, may cause harmful interference to radio communications.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by reorienting or
relocating the receiving antenna; or by increasing the separation between
the equipment and receiver.
Product Name:
Speed + Distance System - GPS Transceiver Series M8xx/M5xx
Heart Rate Monitor System – HRM Transmitter Series M8xx/M5xx
Product Type: Intentional Radiator
Model
FCC ID No.
IC Certification No.
M821 Heart Rate Monitor
M515 Heart Rate Monitor
EP9TMXHRM
33481021492A
EP9TMXM515 3348A-M515
Caution: Any changes or modifications to the equipment listed above, not
expressly approved by Timex Corporation, could void the user’s authority
to operate this equipment.
M850 Speed + Distance Monitor EP9TMXM850 3348A-12181
These devices comply with Part 15 of the FCC rules. Operation is subject
to the following two conditions: (1) The device may not cause harmful
interference, and (2) the device must accept any interference received,
including interference that may cause undesired operation.
Industry Canada Notice: This Class B digital apparatus complies with
Canadian ICES-003. Cet appariel numérique de la classe B est conforme
à la norme NMB-003 du Canada.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
27
Service
If your TIMEX® watch should ever need servicing, send it to Timex as set
forth in the Timex International Warranty or addressed to HOTLINE WATCH
SERVICE, P.O. Box 2740, Little Rock, AR 72203.
For service questions, call 1-800-448-4639
For your convenience in obtaining factory service, participating Timex
retailers can provide you with a pre-addressed Watch Repair Mailer.
See the Timex International Warranty for specific instructions on the care
and service of your Timex® watch.
Should you need a replacement strap or band, call 1-800-448-4639.
TIMEX, NIGHT-MODE,
and the TRIATHLON watch design are
registered trademarks of Timex Corporation in the U.S. and other countries.
INDIGLO is a registered trademark of Indiglo Corporation in the U.S. and
other countries.
© 2003 Timex Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
28
29
|