Timex Watch 558 095002 User Manual

558-095002  
THANK YOU FOR PURCHASING YOUR TIMEX WATCH.  
EXTENDED WARRANTY  
Available in U.S. only. Extend your warranty for an additional 4 years from date of purchase  
for $5. You can pay with AMEX, Discover, Visa or MasterCard by calling 1 800-448-4639 during  
normal business hours. Payment must be made within 30 days of purchase. Name, address,  
telephone number, purchase date, and 5-digit model number required. You can also mail a  
check for $5 to: Timex Extended Warranty, P.O. Box 1676, Dept. EF, Little Rock, AR 72203.  
Please read instructions carefully to understand how to operate your Timex watch.  
Your model may not have all of the features described in this booklet.  
FEATURES  
• Analog and digital time display • Auto calendar 2000-2099 • Two time zones • Two daily  
alarms linked to time zone •Three linked countdown timers • Chronograph with 42-lap memory  
BASIC OPERATIONS  
SET/INDIGLO  
MODE  
START/STOP  
CROWN  
LAP/RESET  
A. In TIME mode, press and hold START/STOP to shut off digital display. Press once to turn  
back on.  
B
Press SET/INDIGLO to illuminate watch face.  
C. Press MODE to cycle through CHRONO, RECALL, TIMER, ALARM and TIME modes. Press and  
hold MODE in any mode to return to TIME display.  
D. When setting digits, press START/STOP to go forward or LAP/RESET to go backward or  
hold to change rapidly.  
ANALOG TIME  
Pull crown and turn to set HOUR and MINUTE hands. Push crown in to complete setting.  
DIGITAL TIME AND DATE  
A. Press MODE until TIME appears. Press and hold SET/INDIGLO to begin setting time.  
B. Press START/STOP or LAP/RESET to set SECONDS to 0.  
C. Press MODE to select HOURS digits.  
D. Press START/STOP or LAP/RESET to advance. Go through 12 hours for AM or PM.  
E. Press MODE to select MINUTES, YEAR, MONTH, DAY, 12- or 24-time display, MONTH-DAY or  
DAY-MONTH date display. Press START/STOP or LAP/RESET to advance selected item.  
F. Press SET/INDIGLO when done.  
G. Press and hold LAP/RESET and wait for beep to change display to second TIME ZONE.  
Repeat above to set time.  
Note: once date is set, calendar runs automatically.  
CHRONOGRAPH  
A. Press MODE until CHRONO appears. Watch will briefly display available storage (1-42).  
B. Press START/STOP to start CHRONO.  
C. Press LAP/RESET to take a lap. Display of running time resumes after 5 seconds.  
D. Press START/STOP to stop timing. Press again to resume.  
E. While CHRONO is stopped, press MODE to enter RECALL mode. Press START/STOP repeat-  
edly to recall stored lap and split times.  
F. Press and hold LAP/RESET to clear stored times. Chrono will automatically clear. OR  
G. In CHRONO mode, press and hold LAP/RESET to reset and stored laps/splits will automati-  
cally clear.  
COUNTDOWN TIMERS  
A. Press MODE until TIMER appears. Press LAP/RESET to select LOOP 1, 2 or 3. Timers will  
count upwards starting with last LOOP TIMER set, unless last LOOP TIMER set is 3 (timers  
will then count backwards from LOOP 3).  
B. Press and hold SET/INDIGLO to set LOOP TIMER. Press START/STOP or LAP/RESET to set  
seconds.  
C. Press MODE to select MINUTES, press START/STOP or LAP/RESET to set minutes.  
D. Press MODE and then START/STOP or LAP/RESET to select next LOOP.  
E. Repeat above steps to set each additional LOOP.  
F. Press SET/INDIGLO when done.  
G. Press START/STOP to start or stop LOOP TIMER.  
H. With TIMER stopped, press and hold SET/INDIGLO to reset all LOOPS to zero.  
At end of timed LOOP, next LOOP TIMER starts. Cycle is continuous for up to 30 loops.  
ALARM  
A. Press MODE until ALARM appears.  
B. Press LAP/RESET to select ALARM 1 or 2.  
C. Press and hold SET/INDIGLO to set.  
D. Press START/STOP or LAP/RESET to set HOURS. Go through 12 hours for AM or PM.  
E. Press MODE to select MINUTES, press START/STOP or LAP/RESET to set  
F. Press MODE to select TIME ZONE for alarm, press START/STOP or LAP/RESET to set.  
G. Repeat to select MONTH and DAY. Leave blank for daily alarm.  
H. Press SET/INDIGLO when done.  
I. Repeat for second ALARM.  
J. Press START/STOP to turn ALARM on or off.  
Alarm symbol (  
) will appear in TIME display when ALARM is armed for that TIME ZONE.  
Beep will sound when ALARM time is reached. Press any button to silence alarm.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Targus PDAs Smartphones iPAQ3900 User Manual
Tekkeon MP3 Docking Station ND2000 User Manual
Toastmaster Griddle 24 User Manual
Toshiba VCR KV 6200A User Manual
Transition Networks Switch MIL SM808GPXX User Manual
TRENDnet Network Card TEW 630APB User Manual
Tricity Bendix Cooktop SIE556 User Manual
Tripp Lite Network Cables N201 010 GY User Manual
Villaware Cookware 8 280 User Manual
Vulcan Hart Convection Oven ET10 User Manual