PurepowerTM Series
Unmatched
Performance
C
Copyright
2009 Thermaltake Technology Co., Ltd. All Rights Reserved.
All trademarks are the property of their respective owners.
Reproduction in whole or in part without written permission is prohibited.
Download from Www.Somanuals.com. All Manuals Search And Download.
PurepowerTM Series
PurepowerTM Series
1. Warnings and Caution
2. Components Check
1. Do not unplug the AC power cord when the power supply is in
use. Doing so may cause damage to your components.
2. Do not place the power supply in a high humidity and/or
temperature environment.
- Power supply unit
- User manual
3. High voltages exist in the power supply. Do not open the
power supply case unless you are an authorized service
technician or electrician. Doing so will void the warranty.
4. PSU should be powered by the source indicated on the rating
label.
- AC power cord
- Mounting screws
5. All warranties and guarantees will be voided, if failure to
comply with any of the warnings and cautions covered in this
manual.
01
02
Download from Www.Somanuals.com. All Manuals Search And Download.
PurepowerTM Series
PurepowerTM Series
3. Power Connector Introduction
4. Installation Steps
Cable
Note: Make sure that your system is turned off and unplugged.
Disconnect the AC power cord from your old power supply.
P/N Model
20+4pin Main 4pin +12V CPU
SATA
Peripheral
Connector
Floppy
6pin PCI-E
Connector
Connector
1
Connector
1
Connector
Connector
W0330 550W
W0329 450W
W0328 350W
4
2
2
6
5
5
2
1
1
1
1
0
1
1
1
1
1. Open your computer case; please refer to the direction in your
case manual.
2. Install the PSU into the case with the four screws provided.
3. Connect the 24 pin Main Power Connector to your
motherboard and peripheral. If your motherboard uses a 20-pin
MODELS
Connector Type
Connectors & Cable length
1 x 24pin Main connector
20+4pin
W0330
W0329
W0328
(400mm)
1 x ATX 12V 4pin connector
(400mm)
connector, detach the 4-pin attachment on the 24-pin connector.
Note: The detachable 4-pin section cannot be used in place of a 4-pin +12V
connector.
ATX 12V 4pin
3 x Peripheral, 1 x FDD connectors
(400mm + 150mm + 150mm + 150mm)
3 x Peripheral, 1 x FDD connectors
(400mm + 150mm + 150mm + 150mm)
W0330
W0329
W0328
W0330
4. Connect the 8-pin or 4-pin connector for the CPUs.
5. Connect other peripheral power connectors to devices such as
hard drives, optical drives, etc.
3 x Peripheral, 1 x FDD connectors
(400mm + 150mm + 150mm + 150mm)
2 x Peripheral connectors
Molex & FDD
(400mm + 150mm)
3 x Peripheral connectors
6. Close your computer case and connect the AC power cord to
the power supply AC inlet.
(400mm + 150mm + 150mm)
2 x Peripheral, 1 x FDD connectors
(400mm + 150mm + 150mm)
2 x SATA connectors
(400mm +150mm)
2 x SATA connectors
(400mm +150mm)
SATA
2 x SATA connectors
(400mm + 150mm)
W0329
W0328
SATA
1 x 6pin PCI-E connectors
(400mm)
W0330
W0329
PCI-E 6pin
03
04
Download from Www.Somanuals.com. All Manuals Search And Download.
PurepowerTM Series
PurepowerTM Series
5. Product Features
6. Output Specification
INPUT VOLTAGE: 115V/230V, FREQUENCY:47HZ-63HZ
OUTPUT
PEAK
MODEL DC OUTPUT +3.3V +5V +12V1 +12V2 -12V +5Vsb
POWER POWER
MAX Current 18A
28A
18A
1.0A 1.0A
15A 15A 0.3A 2.5A
0A 0A
10A 0.3A 2.5A
0.5A 0.5A 0.5A 0A 0A
18A 0.3A 2.0A
W0330
W0329
W0328
405W
355W
255W
550W
450W
350W
MIN Current
MAX Current
MIN Current
2A
0A 0A
0.3A
21A
18A
- Ultra-efficient circuitry design.
0.3A 0.5A 0.5A 0.5A
18A 10A
- Near-silent thermal engineering.
MAX Current 19A
MIN Current
- Stable true power output.
0.3A
- Intel ATX 12V 2.2 Compatible
- Dual +12V output circuit provides outstanding steady output
for system.
- Adjustable AC input (115V/230V) for different country.
- Intel & AMD CPU compliance.
7. Total Protection
- Compatible with latest PCI-Express (450W / 550W).
- Super quiet and stable 8cm fan.
Over Voltage Protection
- High reliability: MTBF>100,000 hours.
- Protections: Over Power, Over Voltage, and Short-Circuit
protection.
Voltage Source
+3.3V
Protection Point
4.5V Max.
+5V
7.0V Max.
- Safety / EMI Approvals: UL and FCC certified.
+12V
15.6V Max.
Short Circuit Protection
A short circuit placed between dc return and output rail (Approximately
0.03ohm) shall cause no damage to power supply and the main output
shall shut down and latch off, but the 5Vsb might recovery automatically.
05
06
Download from Www.Somanuals.com. All Manuals Search And Download.
|