Instruction Manual
STVG-707
Please read before using this unit.
Semi-Pro Compact Disc +
Graphics With Built-In TV, Video
Camera Karaoke Center
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
1. Read Instructions - All the safety and operating instructions should be read before the product is operated.
2. Retain Instructions- The safety and operating instructions should be retained for future reference.
3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions- All operating and use instructions should be followed.
5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol
cleaners. Useadampclothforcleaningtheexterioronly. DoNOTattempttocleantheinside.
6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause
hazards.
7. Water and Moisture - Do not use this product near water - for example, near a bath tub, wash bowl, kitchen
sink, orlaundrytub;inawetbasement, ornearaswimmingpool, andthelike.
8. Accessories - Do not place this product on an unstable cart, stand tripod, bracket, or table. The product may
fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand,
tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the
product should follow the manufacturer's instructions, and should use a mounting accessory recommended by
the manufacturer.
9. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces
maycausetheapplianceandcartcombinationtooverturn.
10. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of
the product and to protect it from overheating, and these openings must not be blocked or covered. The
openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This
product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is
provided.
11. Power Sources - This product should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other sources, refer to the operating
instruction.
12. Grounding or Polarization - This product may be equipped with a polarized alternating current line plug (a
plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to
fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized
plug.
Alternate Warnings - This product may be equipped with a three-wire grounding-type plug, a plug having a
third (grounding) pin. This plug will only fit into a grounding-type power outlet. This is a safety feature. If you are
unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat
thesafetypurposeofthegrounding-typeplug.
13. Power-Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
14. Protective Attachment Plug - The product is equipped with an attachment plug having overload protection.
This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If
replacement of the plug is required, be sure the service technician has used a replacement plug specified by
themanufacturerthathasthesameoverloadprotectionastheoriginalplug.
E2
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
15. OutdoorAntennaGrounding - If an outside antenna is connected to the receiver, be sure the antenna system
is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of
the National Electrical Code, ANSI/NFPA70, provides information with regard to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding
conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the
groundingelectrode. Seefigure:
ANTENNA
LEAD IN
WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
NEC-NATIONAL ELECTRICAL CODE
S2898A
16. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This
willpreventdamagetotheproductduetolightningandpower-linesurges.
17. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact
withthemmightbefatal.
18. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
resultinariskoffireorelectricshock.
19. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may
touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of
any kind on the product.
20. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to
dangerousvoltageorotherhazards. Referallservicingtoqualifiedservicepersonnel.
21. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service
personnelunderthefollowingconditions:
a) Whenthepower-supplycordorplugisdamaged,
b) Ifliquidhasbeenspilled, orobjectshavefallenintotheproduct,
c) Iftheproducthasbeenexposedtorainorwater,
d) If the product does not operate normally by following the operating instructions. Adjust only those controls
that are covered by the operating instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to restore the product to its normal
operation.
e) Iftheproducthasbeendroppedordamagedinanyway, and
f) Whentheproductexhibitsadistinctchangeinperformance-thisindicatesaneedforservice.
22. Replacement Parts - When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as the original part.
Unauthorizedsubstitutionsmayresultinfire, electricshock, orotherhazards.
23. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform
safetycheckstodeterminethattheproductisinproperoperatingcondition.
24. Wall or Ceiling Mounting - The product should be mounted to a wall or ceiling only as recommended by the
manufacturer.
25. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
E3
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
Your STVG-707 Semi-Pro Compact Disc+Graphics With Built-In TV, Video Camera Karaoke
Center will provide you with many years of fun and entertainment. It can let you be the "star"
as you sing along with your favorite recordings and hear your voice with the music through
the system's speaker.
This Karaoke System is made up of compact designs and full of features, yet it is easy to
use. Just a few simple instructions and you will become an expert. Before you use your unit,
please glance through this manual to familiarize yourself with all the features available and
the sections of the manual that describe their operation. Next go to the section for the
specific operation you wish to perform.
For your easy reference, listed here are some of the main features of this Karaoke Center:
Lyrics on TV screen - displays the lyrics with the tempo of music when playing CD+G discs.
Auto Voice Control (A.V.C.) - lets you replace the original singer's voice with your own
voice when any prerecorded multiplex karaoke disc or tape is played. To activate, just rotate
Mic Volume to a comfortable listening level, and Auto Voice Control for the best balance
between playback and microphone levels.
Balance Control - lets you adjust the balance between the prerecorded original singer's
voice and the music if you use a multiplex karaoke tape or disc.
Echo Control - lets you add an echo to enrich your voice for a concert hall effect.
Multiple Karaoke music center - it plays audio Compact Discs, CD+Graphics discs and
Cassette tapes in its cassette deck.
- lift up camera lens to display your image on the Singing Machine’s monitor.
Built-In Speaker - lets you share the music with your family or friends.
Auxiliary Output Jacks - let you connect another audio output component, such as an
equalizer/booster or a PAsystem.
E4
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL LOCATIONS
(Fig. 1)
1 2
3
4
5
6
7
8
9 10
STVG-707
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
FRONT VIEW
1. BAND Selector
2. Monitor
3. FM (ST.) Indicator
4. Dial Pointer
5. PROGRAM LED
6. PLAY/PAUSE LED
7. Model Number
8. TUNING Knob
9. LED Display
11. CD Compartment
12. ON/OFF Button
13. ON/OFF LED
14. MEGA BASS Button
15. FUNCTION Selector
16. MONITOR Selector
17. VIDEO OUT Selector
18. BALANCE Control
19. REPEAT LED
21. AUTO VOICE CONTROL
22. MIC Holder
23. PITCH Control
24. Cassette Door
25. RECORD Button
26. PLAY Button
27. REWIND Button
28. SKIP Button
29. SKIP Button
10. VIDEO CAMERA
20. ECHO Control
30. PLAY/PAUSE Button
E5
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL LOCATIONS
(Fig. 2)
47
48
49
50
51
55
56
57
52
53
54
58
FRONT VIEW
31. STOP Button
32. PROGRAM Button
33. REPEAT Button
34. OPEN/CLOSE Button
35. MASTER VOLUME
Control
41. HEADPHONE Jack
42. MIC 1 Jack
43. PAUSE Button
44. STOP/EJECT Button
45. FAST FORWARD
Button
49. AUX OUTPUT Jack (L)
50. VIDEO IN Jack
51. Antenna Jack
52. VIDEO OUT Jack
53. AUX OUTPUT Jack (R)
54. AUX INPUT Jack (R)
55. VERTICAL HOLD
Control
36. CDG LED
46. Loudspeaker
37. MIC 1 Volume
38. MIC 2 Volume
39. MIC Holder
REAR VIEW
47. Rod Antenna
48. AUX INPUT Jack (L)
56. BRIGHTNESS Control
57. CONTRAST Control
58. AC POWER Cord
40. MIC 2 Jack
E6
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING THE CONNECTIONS
CONNECTINGPOWER
You can power the system from a standardAC outlet by using the supplied power cord.
CAUTION: The supplied AC power cord has a polarized plug that fits into the wall outlet only one
way. If the plug does not fit properly, turn it over and try again. Do not force it.
CONNECTING TO YOUR TV
The Singing Machine provides a patch cord to give you the option of connecting your STVG-707
to an external audio/sound system and video device. The patch cord has three RCA jacks at
each end. White and Red are for left and right audio connections and the yellow is for connecting
thevideo.
Make sure that you have a CDG disc in the Singing Machine and playing when you are making
this connection. You will know you have the proper settings on your TV or VCR as soon as you
seetheSingingMachinelogoorlyricsonthescreen!
NOTE: Occasionally, a black shadow might appear on the background image of the TV screen.
This is due to an interference of the frequency signal. It is not a defect.
VIDEO CONNECTION
PleasefollowthestepsbelowtodisplayCDGlyricsontheTVscreen:
(1) Locatethemulticoloredpatchcords.
(2) Connectvideocable(yellow)totheVideoOutofthebackoftheSingingMachine.
(3) Connect the other end of the video cable (yellow) to the Video Input on your TV or
VCR.
REAR VIEW OF
SINGING MACHINE
REAR VIEW OF TV
VIDEO
IN
AUX
OUT
IN
L
VIDEO IN
R
VIDEO
OUT
VIDEO OUTPUT
(Yellow Jack)
VIDEO INPUT
(Yellow Jack)
If your television does not have the required Video Input, you will need an RF Modulator (Radio
Frequency Modulator), which connects through your TV Antenna or cable line and serves as
Video Input.
An RF Modulator can be purchased at almost any consumer electronics retailer. If you are
connecting the video from the Singing Machine to either a television or a VCR video input jack,
you must specify the source the TV or VCR is to display.Your TV or VCR user guide can tell you
howtodisplaythevideosignalfromthe‘VideoIn’jack.
If you don’t have the manual for your TV or VCR we suggest calling the TV or VCR
manufacturer’s customer service department. Only the manufacturer will be able to tell you very
quickly how to configure your TV or VCR to display the video signal coming from the ‘Video
Input’jack.
D Note: Some projection TV sets do not display the standard blue background used on most
CDGs properly. If the background color is inconsistent or flashing, please try connecting your
SingingMachinetoastandardtubetelevision.
E7
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING THE CONNECTIONS
COMMONWAYSTOCONFIGUREYOURTVORVCR
Your Singing Machine is designed to connect to your TV the same way you would connect a
video camera, VCR or video game. The Singing Machine is constantly sending the video and
audio signals to the 'Video Out' and 'AUX OUT' jacks whenever you play a CDG. So, load a CDG
into your Singing Machine before you start making these connections. You will see lyrics on the
TVscreenassoonasyougetthesetupcompletedcorrectly.
We refer to TV/VCR because manufacturers use very similar ways to connect TVs and VCRs
and you can connect your Singing Machine to a TV, VCR or satellite system.The setup of your
TV/VCR is the most difficult part of making the connection for displaying your Singing Machine
lyrics. In most homes, the TV has either a cable connected or antennae in use. Once you
connect your Singing Machine to the TV/VCR, you must 'tell' your TV/VCR to display the input
fromtheSingingMachineinsteadoftheusualinputfromthecableorantennae.
Check your TV/VCR user manual for the easiest way to setup your particular entertainment
system. If you don't have your manual you can always call your TV/VCR manufacturer for that
information or try hitting their website for online assistance. We've listed below the most
commonwaysofsettingupaTV/VCR:
(1) In the setup menu for configuring the TV/VCR there may be an option on 'Input Selection'
whereyoumaychoosebetween'Cable/Ant.', 'Video1', or'Video2'etc. astheinputsource.
(2) Try looking for a 'Video' channel between the highest channel and the lowest channel on
yourTVorVCR. (i.e. Between99and2maybe'VIDEO'or'INPUT'or'GAME')
(3) Look for a button on the remote control for the TV/VCR you are connecting to that says
'VIDEO', 'VIDEO 1', 'Game', 'AUX', 'EXT', 'LINE1', 'LINE-IN' or occasionally the 'VCR'
buttonwilldisplaytheVideoinputsource.
CONNECTINGAVIDEOCOMPONENTFORINPUT
Please follow the steps below to display CDG lyrics on the Singing Machine’s monitor from
anothervideosource:
(1) Locate the multicolored patch cords.
(2) Connectvideocable(yellow)totheVideoInofthebackoftheSingingMachine.
(3) Connect the other end of the video cable (yellow) to the Video Output on another video
sourcesuchasaVCR.
(4) Set the FUNCTION Selector to AUX and the MONITOR Selector to CDG.
(5) Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD Controls at the back of
the Singing Machine to have the best picture quality.
REAR VIEW OF
SINGING MACHINE
REAR VIEW OF VCR
VIDEO
IN
AUX
OUT
IN
L
VIDEO OUT
VIDEO INPUT
(Yellow Jack)
R
VIDEO
OUT
VIDEO OUTPUT
(Yellow Jack)
E8
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING THE CONNECTIONS
AUDIO CONNECTION
Connect the STVG-707 to your TV or home stereo system using the White and Red connections
on the supplied patch cord. Plug the white end of the patch cord into the white AUX OUT jack on
the STVG-707. Plug the red end of the patch cord into the red AUX OUT jack on STVG-707. Now
connect the other end of the cable’s white (left channel) and red (right channel) plugs to your TV
orhomestereosystem’s‘AUDIOIN’or‘AUXIN’jacks.
REAR VIEW OF
SINGING MACHINE
REAR VIEW OF TV
AUX
R
L
OUT
IN
L
AUDIO IN
R
AUX OUTPUT
L
(White Jack)
AUX OUTPUT
R
(Red Jack)
AUDIO INPUT AUDIO INPUT
R
(Red Jack) (White Jack)
L
CONNECTINGANAUDIOCOMPONENTFORINPUT
To connect another audio source (such as a Tuner, an AV Receiver or a VCR) so you can sing
along with its music, simply connect the Audio Output jacks (Red & White RCA jacks) to the
SingingMachine’sAUXINL&Rjacks.
REAR VIEW OF
SINGING MACHINE
ANOTHER
AUDIO COMPONENT
AUX
R
L
OUT
IN
L
AUDIO OUT
R
AUX INPUT
R
(Red Jack)
AUX INPUT
L
(White Jack)
AUDIO OUTPUT AUDIO OUTPUT
R
(Red Jack)
L
(White Jack)
E9
Download from Www.Somanuals.com. All Manuals Search And Download.
MAKING THE CONNECTIONS
ANTENNA CONNECTION
1. RODANTENNA(75OHM)
In a normal reception area, the built-in Rod Antenna will deliver a sharp clear picture. When
operation, extendit'slengthandadjustit'sdirect&anglefortheclearestpicture.
2. Externalantennaadaptor(PAD).
VIDEO
IN
AUX
OUT
IN
L
CONTRAST BRIGHT V-HOLD
ANT
R
VIDEO
OUT
300 OHM FEEDER CONNECTION
75 OHM COAXIAL CABLE CONNECTION
MONITORSelector
!
!
!
!
!
To display image on the monitor from another video source, set the MONITOR Selector to
CDGmodeandsettheFUNCTIONSelectortoAUXmode.
To display CDG lyrics on the Singing Machine’s monitor, set the MONITOR Selector and
FUNCTIONSelectortoCDGmode.
To display your image on the Singing Machine’s monitor, set the MONITOR Selector to
CAMERAmode.
To turn off the monitor on the Singing Machine, set the MONITOR Selector to TV-OFF
mode.
Adjust the BRIGHTNESS, CONTRAST and VERTICAL HOLD controls at the back of the
Singing Machine to have the best picture quality.
VIDEO OUT Selector
!
!
!
To display your image on the other machine, set the VIDEO OUT Selector to CAMERA
mode.
To display CDG lyrics on the other machine, set the VIDEO OUT Selector and FUNCTION
SelectortoCDGmode.
To display image on the other machine from another video source, set the VIDEO OUT
SelectorandFUNCTIONSelectortoAUXmode.
E10
Download from Www.Somanuals.com. All Manuals Search And Download.
CD OR CD+G OPERATION
PREPARATION
! This unit is designed to play CD’s bearing the identification logo "
conformtotheCDstandard, theymaynotplayproperly.
". If CD’s do not
! Fingerprints and dust should be carefully wiped off with a soft cloth. Wipe in a straight motion
fromthecenterofthedisctotheoutsideedge.
! Never use chemicals, such as record cleaning sprays, antistatic sprays or fluids, benzene or
thinner to clean compact discs. These chemicals will permanently damage the plastic
surfaceofthedisc.
! Always place the compact disc on the disc tray with the label facing upward. Compact discs
canbeplayedononlyoneside.
! To remove a disc from its storage case, press down on the center of the case and lift the disc
out, holdingitcarefullybytheedges.
! Discsshouldbereturnedtotheircasesafterusetoprotectthemfromdustandscratches.
! To prevent warping the disc, do not expose it to direct sunlight, high humidity or high
temperaturesforextendedperiodsoftime.
! Do not apply paper or write anything on either side of the disc. The inks used in some felt-tips
pensmaydamagethesurfacesofthedisc.
PLAYINGCDORCD+GDISC
Reminders:
! Adjust MASTER VOLUME control on your STVG-707, TV or audio system to a comfortable
level.
! Adjust MIC/ECHO/BALANCE controls as needed to achieve the desired mix of music and
vocalsthroughyourTVorsoundsystem.
! Never place anything except a compact disc on the disc tray. Foreign objects can damage
the unit.
! Only place one disc on the disc tray at a time.
TURNING POWER ON/OFF
! To turn on the Karaoke center, press the ON/OFF button, the ON/OFF LED will light up.
! To turn off the system, press the ON/OFF button again, the ON/OFF LED will turn off.
FUNCTION SELECT
Set the FUNCTION Selector to CD+G.
LOADINGADISC
! Press the
OPEN/CLOSE button to open the CD compartment. Place a disc on the
compartmentwiththeprintingsidefacingupwardandtheshinysidefacingdown.
! Press the OPEN/CLOSE button again to close the CD compartment. The LED window will
displaytotalnumberoftracks. (Ifnodiscisloaded, itwilldisplay“ ”).
(Refer to the Trouble Shooting Guide on page E17 if a disc is loaded but the total tracks
do not appear.)
E11
Download from Www.Somanuals.com. All Manuals Search And Download.
CD OR CD+G OPERATION
PLAY/PAUSEMODE
! To start playing, press the PLAY/PAUSE button. The first track [ ] and the PLAY/PAUSE
LED will be lit.
! To temporarily stop playing, press the PLAY/PAUSE button. The PLAY/PAUSE LED
Indicatorwillflash.
! Toresumeplay, pressthisbuttonagain.
STOP MODE
If the STOP button is pressed in the course of playing, the disc will cease to play. (The total
numberoftrackswillbeshownontheLEDwindow).
SKIPPLAY(FORBOTHCDANDCDGDISCS)
! During STOP mode, you can skip up or down to your desired track number by pressing a
SKIPbutton (
-SKIP-
).
! Toresumeplayingtheselectedsong, pressPLAY/PAUSEbutton.
SEARCH(FORAUDIOCDDISCONLY)
When playing any audio CD, press and hold the SKIP button (
-SKIP-
). The CD will
search at high speed in the forward or backward direction. Normal play will continue when you
releasethebutton.
REPEAT
! To repeat the track currently playing, press the REPEAT button once.The REPEAT LED will
start to flash.
! To repeat all tracks, press the REPEAT button twice. The REPEATLED will light up and stay
lit.
! To clear the repeat function. Press the REPEAT button again. The REPEATLED will turn off.
PROGRAM
! Use this button to program and play back songs in a preselected order.
Step 1: Programming should be done in the stop mode only. Press the PROGRAM key
until the PROGRAM LED flashes, the track will read [
Step 2: Press the double arrow keys ( -SKIP- ) to select a desired track.
].
Step 3: Press PROGRAM key to confirm entry. You can repeat the same steps up to a
maximum of 30 tracks.
Step 4: Press PLAY to activate PROGRAM.
! PresstheSTOPbuttontoclearalltheprogrammedentries.
MONITOR (FORCDGONLY)
! Set MONITOR Selector to CDG if you want to display a CDG lyrics on the Singing Machine’s
monitor.
MEGABASS
When playing CD disc, Radio, AUX or Cassette Tape, you can press the MEGA BASS button,
the mega bass effect will be turned on and press the MEGA BASS button again, the mega bass
effect will be turned off.
E12
Download from Www.Somanuals.com. All Manuals Search And Download.
TV OPERATIONS
TV BROADCASTING RECEPTION
1. Press the ON/OFF button.
2. Switch FUNCTION Selector to TV/RADIO position.
3. Switch MONITOR Selector to TV position.
4. Turn TUNING knob to select desired TV channel with LO VHF/HI VHF/UHF channel
selector.
5. For the best signal, connect the unit to an aerial antenna using the external antenna
jack or use the directional antenna on the back of the unit.
6. Adjust BRIGHTNESS (55), CONTRAST (56) and VERTICAL HOLD (54) volume to have
the best picture quality. (Fig.2)
7. Adjust MASTER VOLUME to your pleasure.
8. To turn the TV off, set FUNCTION Selector to TAPE/AUX position.
SING ALONG - TV BROADCASTING
1. Follow operating instructions for TV broadcasting.
2. Follow operating instructions for MICROPHONES/ECHO on page E14.
3. Adjust MASTER VOLUME, MIC VOLUME and ECHO controls. Your voice will be
combined with the TV broadcasting channel output and will be heard through the
loudspeaker.
RECORDING SING ALONG - TVBROADCASTING
1. Follow operating instructions for TV broadcasting.
2. Follow instructions for Sing Along-TV Broadcasting, including adjusting Volume,
ECHO controls.
3. Load a blank cassette.
4. Press both RECORD and PLAY buttons of Cassette Deck at the same time. The
combined output of your voice and the playback of TV broadcasting will be
recorded on theblank tape in Cassette Deck.
Note: If you want to record a TV broadcast without Sing Along, load a blank tape in
Cassette Deck. Unplug the microphone.
E13
Download from Www.Somanuals.com. All Manuals Search And Download.
CASSETTE OPERATIONS
LOADING AND UNLOADING CASSETTES
Follow these steps to load and unload
cassette:
1. Press STOP/EJECT button (12).
2. Insert cassette with desired side facing
you, tape surface down. Avoid touching
tape.
3. Close cassette holder/tape deck cover.
To ensure firm locking of cassette
holder/tape covers, please press the
cassette door(s) at the centre point
(or the rightmost positions) until a
'click' sound isHeard.
Note: To unload, press STOP/EJECT button
(12), remove cassette and close
cover.
PLAYBACK
1. Press the ON/OFF button (1) and set the
FUNCTION Selector (2) to TAPE mode.
2. Load cassette into the cassette
compartment.
3. Depress PLAY button (7).
4. Adjust MASTER VOLUME (10), and
BALANCE (5) controls to your pleasure.
5. To stop tape, press STOP/EJECT button
(12) on that Deck once. (Press a second
time to eject the tape.) Or, when the tape
reaches its end, that deck will
automatically stop and its PLAY button
(7) will be released.
8
MICROPHONES/ECHO/PITCH
1. When either or both Microphone are
plugged into the Microphone jacks (13),
their output is mixed with the playback from
Radio/TV/Cassette tapes/CD/CDG discs.
2. Adjust MIC VOLUME (11) for best balance
between playback and microphone levels.
3. Adjust ECHO (6) to add depth and richness
to vocals, and PITCH (14) to control the
speed of cassette playback.
1
2
3
4
9
10
5
SING ALONG - TAPE
1. Follow instructions for PLAYBACK.
2. F o l l o w i n s t r u c t i o n s f o r
MICROPHONES/ECHO/PTICH.
3. Adjust MASTER VOLUME (10), PTICH (14)
and ECHO controls (6). Your voice will be
combined with the playback output and will
be heard through the loudspeaker.
6
7
11
12
13
14
E14
Download from Www.Somanuals.com. All Manuals Search And Download.
RADIO AND OTHER OPERATIONS
AM/FM RADIO
3. Switch the FUNCTION Selector (2) to
AUX position.
4. Press the ON/OFF button (1).
5. Plug in the microphone(s) into either of
the MIC jacks.
6. Load the video cassette and then start
playback.
7. F o l l o w i n s t r u c t i o n s f o r
MICROPHONES/ECHO.
8. Adjust MASTER VOLUME (10) and
ECHO controls (6). Your voice will be
combined with the playback output and
will be heard through the loudspeaker.
9. With Singing Machine or similar
multiplex cassettes, you can sing duets
along with the recorded artist and
background music. Or by turning the
BALANCE control (5), you can
eliminate the vocal track and do a solo
performance with the background
music.
1. Press the ON/OFF button (1).
2. Switch FUNCTION Selector (2) to
TV/RADIO position.
3. Switch MONITOR Selector (3) to radio
position.
4. Switch BAND selector (4) to either AM,
FM or FM (ST.) radio position.
5. For FM or FM (ST.) reception, use
directional antenna on back of unit (8)
for best signal. (AM antenna is built-in).
6. Turn TUNING knob (9) to select desired
station as indicated on dial.
7. Adjust MASTER VOLUME (10) to your
pleasure.
8. To turn the radio off, set FUNCTION
Se le ct or (2 ) to CD G/ TAP E/ AU X
position.
SING ALONG - RADIO
1. Follow operating instructions for AM/FM
radio.
2. Follow operating instructions for
MICROPHONES/ECHO.
P U B L I C A D D R E S S
MICROPHONE
-
U S I N G
A
3. Adjust MASTER VOLUME (10), MIC
VOLUME (11) and ECHO (6) controls.
Your voice will be combined with the
radio station output and will be heard
through the loudspeaker.
The STVG-707 can be used as a PA
(PublicAddress System).
Public Address (PA) Operation Procedures
1. Connect the supplied Microphone to
either one of the MIC input sockets.
2. Press the ON/OFF button to turn the
unit on.
RECORDING SING ALONG - RADIO
1. Load a blank cassette.
2. Follow instructions for Sing Along-
Radio, including adjusting volume,
ECHO and Tape controls.
3. Press both RECORD and PLAY
buttons of Cassette Deck at the same
time. The combined output of your
voice and radio station output will be
recorded on the blank tape in Cassette
Deck.
3. Set the FUNCTION Selector to
CDG/TAPE /AUX. Move the MIC
VOLUME control to central position.
4. Move the ON/OFF switch located on
the Microphone to ON position and
speak or sing to the Microphone. The
Microphone sensitivity and loudness
could be adjusted as required by
turning the MIC VOLUME control
and/or MASTER VOLUME control.
5. To add depth or ambiance to your
voice, adjust the ECHO control until the
desired effect is obtained.
Note: If you want to record a radio
broadcast without Sing Along, load
a blank tape into Cassette Deck.
Unplug the microphone.
Note: To prevent feedback or whistling
from occurring, please be sure that
the microphone is not too close to
the STVG-707 unit.
SING ALONG WITH A VIDEO CASSETTE
Follow these steps to sing along with a
video cassette.
1. Connect a stereo VCR's Left and Right
audio output (AUX OUT) to the
system's AUX IN jacks (47,53). (Fig.2)
2. Connect a VCR's Video Out to the
system's VIDEO IN jack (49). (Fig.2)
E15
Download from Www.Somanuals.com. All Manuals Search And Download.
CARE AND MAINTENANCE
POWERSWITCH
After using the STVG-707, turn off the power
bypressingtheON/OFFbutton.
NOTE
D Screwdrivers and other metal objects
should never be allowed to come in
contact with tape heads. These will
scratch the sensitive surface causing
damage to your tapes.
D Magnets or magnetized objects
should not be placed near tape
heads.
CLEANINGTHEUNIT
To clean the exterior of the unit, simply wipe
with a soft clean cloth moistened with plain
lukewarmwater.
CLEANINGTAPEHEAD
When the tape is running, magnetic tape
residue, powder and dust naturally
accumulate on the tape deck heads, capstan
and pinch roller, when they become too dirty,
youwillfind:
To prevent fire or shock hazard,
disconnect your stereo system
from the AC power plug when
cleaning.
!
!
!
Soundqualitydeteriorates.
Theoutputsoundleveldrops.
The previous recording is not completely
erased.
COMPACT DISC
Handling Disc
Although the music tracks in the disc are
covered with a protective layer, it is still
advisable to treat the disc carefully.
Ensure that you always pick up discs by
the edge, and put them back in their
holders immediately after use.
!
Recordingisnotperformedsatisfactorily.
Therefore, for continued high
performance from the cassette section,
periodically clean the heads, pinch
rollers and capstans whenever an
accumulation of dust and red-brown
oxide particles is noticed. To do this open
the cassette compartments. Carefully
rub each head (4,5), pinch roller (3) and
capstan (2) with a cotton swab (1)
moistened with isopropyl alcohol or
specialhead-cleaningfluid.
CLEANING DISC
Cleaning will not normally be necessary.
However, should fingerprints, dust or
dirt appear, you can wipe them off with a
soft, lint-free cloth. Wipe the disc in a
straight line from center to edge. You
can moisten the disc first with ordinary
tap water if necessary.
1
2
5
3
4
Proprietary tape head cleaners are
available from most HI-FI retail outlets.
N O T E : D o n o t u s e t h e
d e t e r g e n t o r a b r a s i v e
cleaning agents, for they can
damage the disc.
CASSETTEDECKCARE
Use a clean soft cloth moistened with plain
lukewarm water and wrung dry. Never use
benzol, benzene or other strong chemical
cleaners since these could damage the finish
or your unit. It is important that no liquid
reaches the inside of the unit.
CD PLAYER
The player mechanism is fitted with self-
lubricating bearing and must not be
oiled or greased.
E16
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING GUIDE
If you have followed the instructions and are having difficulty operating the unit, locate the
PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to
locateandremedytheproblem.
PROBLEM
POSSIBLE CAUSE
SOLUTION
No power when ON/OFF No power plug connection at Insert the power plug into the AC
ispressed. the AC outlet. outlet.
No power when plugged The AC outlet may not have Check the outlet with a working
in.
power.
lamp or other electrical appliance.
Volume control is set to
minimum.
Turn up the volume.
Volume control on TV set/PA Turn up the volume at TV set/PA
system is set to minimum.
system.
TV set/PAsystem power is
OFF.
Turn on the power at TV set/PA
system.
No sound.
AUX OUT jacks not
connected.
Follow directions on page E9 for
“Audio Connection”.
The wrong function is
selected.
Select the correct function.
Insert disc correctly.
Disc is inserted upside
down.
Disc is dirty.
Wipe clean with soft cloth.
Use a new disc.
Disc is scratched.
Disc is warped.
CD PLAYER
Use a new disc.
cannot work normally or
“aai”, “aa” , or “aaa” are
displayed.
A nonstandard disc is
inserted.
Only use discs bearing standard
logo as described on page E11.
Moisture has formed inside Wait about 20 to 30 minutes to let
it dry out.
the CD deck.
Singing Machine needs to
be reset.
Disconnect the machine from
power source for 30 seconds.
Source Selection on your
stereo is not set properly.
Select AUX IN as the source for
your home stereo.
No sound - If audio is
going through home
stereo.
Follow direction on page E9 for
connecting to a home stereo
system.
Improper Connection to
stereo system or PA.
E17
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE
SOLUTION
No sound - If audio is
going through TV or
VCR.
Source Selection on TV or
VCR is not correct.
Follow directions on page E7 for
“Video Connection”.
Dirty capstan.
Clean capstan.
Replace tape.
Irregular cassette tape
winding.
CASSETTE
unsteady tape sound.
Pitch control may be in
wrong position.
Adjust PITCH Control.
The erasure prevention tabs Replace tape or cover tab
are broken out. openings with adhesive tape.
Cannot record.
Play button and Record When recording, make sure that
button were not pressed both the Record and Play buttons
downsimultaneously.
are presseddown atthesametime.
Dirty head.
Clean capstan.
Recorded tape sound
is distorted.
Faulty cassette tape.
Replace tape.
Connect the video cable to the
Singing Machine’s VIDEO OUT
andtotheTVVIDEOIN.
Video cable is not connected
properly to the TV.
Source selector on TV is not Using your TV remote to select
VIDEO input.
set to VIDEO.
Connect from VIDEO OUT of the
system to the VIDEO IN of your
VCR or connect to an RF
No song lyrics appear
on screen.
TV does not have video line Modulator and then to the TV
input.
cable input. Refer to “Making the
Connections” on page E7.
Check the disc to be sure it is a
CDG. (See page E21 for details.)
Check disc to be sure it is clean.
(See page E16 for cleaning
instructions.)
A CDG is loaded but the
CDG indicator is not lit.
VERTICAL HOLD Control is Adjust the VERTICAL HOLD
not set correctly. Control.
Picture is jumping up.
E18
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLE SHOOTING GUIDE
PROBLEM
POSSIBLE CAUSE
SOLUTION
The Camera Lens is down. Lift up a Camera Lens.
No image display on
Singing Machine’s
monitor.
MONITOR Selector is not
set properly.
Set MONITOR Selector to
CAMERA mode.
Wait a minute for the camera to
warm up.
Camera has not warmed up.
Camera lens is dirty.
Clean the camera lens.
Image is blurry.
Adjust the lens of the camera by
slightly rotating either left or right
until the display is clear. Do not
overturn the lens.
Camera lens is out of focus.
Please call Customer Service at (866) 670-6888 if the Trouble Shooting Guide information
doesn’tcorrectyourproblem.
Servicing of a Singing Machine by an unauthorized repair facility will void your warranty. The
Singing Machine cannot guarantee future repairs on machines that have been tampered with by
unauthorizedpersonnel.
E19
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
AUDIO SECTION:
OUTPUT POWER (MAXIMUM)
OUTPUT IMPEDANCE
5 WATTS (RMS)
8 OHMS
CD PLAYER SECTION:
FREQUENCY RESPONSE
SIGNAL - TO - NOISE RATIO
WOW AND FLUTTER
100 Hz - 20 kHz (+/-3 dB)
50 dB
IMMEASURABLE
D - A CONVERSION
NUMBER OF PROGRAMS
SAMPLING SYSTEM
1-BIT DAC
30 STEPS RANDOM ACCESS PROGRAMMING
8 TIMES OVER SAMPLING
TV SECTION:
SYSTEM
LO VHF CHANNEL
HI VHF CHANNEL
UHF CHANNEL
NTSC
2-6
7-13
14-83
RADIO SECTION:
AM FREQUENCY RANGE
FM FREQUENCY RANGE
540-1700 kHz
88-108 MHz
CASSETTE DECK SECTION:
WOW AND FLUTTER
FREQUENCY RESPONSE
TAPE SPEED
0.35% (WRMS)
125 Hz - 6.3 kHz (+/- 5dB)
4.75 cm/sec.
-74 dB 600 OHMS IMPEDANCE WITH
6.3mm DYNAMIC MICROPHONE
MICROPHONE
POWER SECTION
(WHERE APPLICABLE)
AC 110V-120V~60Hz OR AC 220V-240V~50Hz
DIMENSIONS (H x W x D)
22.7 x 11.8 x 9.6 Inches / 57.6 x 30.0 x 24.5 cm
19.8 lbs / 9.0 kgs
WEIGHT
1. PRE-RECORDED KARAOKE CD+G DISC
2. AV CABLE
3. DYNAMIC MICROPHONE
ACCESSORIES
Specifications are typical, individual units might vary. They are subject to continuous
improvementwithoutnoticeandwithoutincurringanyobligation.
E20
Download from Www.Somanuals.com. All Manuals Search And Download.
THE SINGING MACHINE KARAOKE GLOSSARY OF TERMS
In addition to all of the terminology associated with consumer electronics products, a few
additional terms are used almost exclusively in karaoke. These terms are meant to familiarize
you with the world of Karaoke. The features listed below may not necessarily pertain to the
particular model Singing Machine that you have. The following are some brief explanations of
karaoketerms:
Echo:
Echo adds depth and resonance to a singer's voice, without affecting the music. This echo is
producedbycreatingminorcontrolledfeedbackinthesinger'svoice.
Multiplex:
Our multiplex recordings contain 2 copies of the same song. One version is a stereo recording of
the song without the lead singer. The second version is recorded with the music and
background vocals on the left channel and the lead singer recorded on the right channel. This
‘split track’ recording allows you to control the volume of the lead singer by adjusting the balance
control. You can sing a duet with the lead singer or use the lead singer as a guide as you learn
the song, gradually fading them out with the balance control until you are able to sing the song
onyourown.
AutoVoiceControl(A.V.C.):
When the AVC function is activated, the vocals on a multiplex recording are eliminated as soon
as the singer begins singing into the microphone. When the singer stops singing, the vocals on
the multiplex recording are automatically re-activated. This useful function is used primarily
during practice sessions while a singer is learning a song. Please note that the AVC function
onlyworkswithmultiplexrecordingandnotwithstandardaudiorecordings.
PitchControl:
This function controls pitch of music by controlling the speed at which a cassette tape plays
back. By increasing the speed of the tape, the music sounds higher (sharp). By slowing the tape
speed, themusicsoundslower(flat).
KeyController:
Key Controller changes the key of the CD/CDG music (+ or - steps) to adjust to the singer’s
voice.
CDG:
This is an acronym for Compact Disc plus Graphics. You will also see variations CD+G, and
CD+Graphics. This is a regular audio CD with information stored on a data track simultaneous
to music. In laymen's terms, CDG has a video output for simple graphics (not full motion video).
In the case of karaoke, the graphics function is used to store song lyrics, and display the lyrics in
synch with music. In most cases, CDG software displays lyrics which change color as they are
to be sung. A regular television is all that is required to display CDG lyrics.
NOTE - CDG is a particular type of compact disc encoding system that is different from VCD or
DVD. Your Singing Machine can decode standard audio compact discs and CDG discs. It will
notreadVCDorDVDencodeddiscs.
Standard audio discs and cassette tapes will not display lyrics on your TV. Audio CDs do not
containthesoftwarenecessarytodisplaylyrics.
E21
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY and SERVICE
THE SINGING MACHINE COMPANY, INC. warrants this product to be free from defects in material
and workmanship for a period of Ninety (90) days from date of sale to the original consumer purchaser.
Product will be replaced or repaired free of charge if it has proven to be defective within the Ninety (90)
day period when said product is returned at customer expense within the warranty period. THIS
WARRANTY DOES NOT COVER ANY EXPENSES INCURRED IN THE REMOVAL AND
REINSTALLATIONOF THIS PRODUCT.
This warranty does not apply to any product damaged by accident, misuse, abuse, improper line voltage,
fire, water, lightning or other acts of God, or any parts or service furnished by anyone else. The warranty
does not cover cartons, carrying cases, batteries, broken or damaged cabinets, or any other items used in
connection with the product or consequential damages due to defect in the product. This warranty does
not cover products sold AS IS or Re-manufactured units or units sold outside the SMC distribution
channel.
ALLIMPLIEDWARRANTIESARELIMITEDTOTHEDURATIONOFTHISWARRANTY.THISIS
THE COMPLETE WARRANTY AND NO OTHER EXPRESSED WARRANTY IS VALID. SOME
STATES DO NOT ALLOW LIMITATIONS ON HOWLONG AN IMPLIED WARRANTY LASTS OR
AN EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THEABOVELIMITATIONSOREXCLUSIONSMAYNOTAPPLYTOYOU.
This warranty gives you specific legal rights and you may also have other rights, which may vary from
state to state.
TO OBTAIN WARRANTY OR OUT OF WARRANTY SERVICE - DO NOT RETURN YOUR
MACHINE BACK TO THE STORE, please call our Customer Service department at (866) 670-
6888 so that we can give you the necessary information on how to obtain your repair or
replacement. Do NOT send your machine to the corporate address listed on this card or on our
website. No repairs are done at this location and your machine will be returned to you at your
expense. Please keep a copy of your receipt. A copy of your receipt is required to obtain service
within the 90-day warranty.
ForCustomersin U.S.A
SERVICE CENTER:
THE SINGING MACHINE COMPANY
18375 S. Broadwick St.
Rancho Dominguez, CA 90220
U.S.A
For Customers in Canada
SERVICE CENTER:
An-Mar Service, Inc.
15 Cedar Point Dr Unit 3
Barrie, Ont, L4N-5R7
Canada
E22
Download from Www.Somanuals.com. All Manuals Search And Download.
The Singing Machine Company, Inc.
707-0307-ENG-SPA-FRE01
PRINTED IN CHINA
6601 Lyons Road, Bldg. A7, Coconut Creek, FL33073-9902, USA.
TEL: (954) 596-1000
FAX: (954) 596-2000
Download from Www.Somanuals.com. All Manuals Search And Download.
|