Instruction Manual
SMB-623
Please read before using this unit.
TOP LOADING CD PLAYER
WITH STEREO AM/FM
RADIO CD ALARM CLOCK
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
CAUTION:
To avoid electric shock, this appliance must not be exposed to dripping or splashing water
Maintain a minimum clearance around the appliance for sufficient ventilation;
Ventilation should not be impeded by covering the ventilation openings with items such as
newspapers, table-cloths, curtains, etc.
Do not place any source of open flame, such as a lighted candle, on the appliance;
Before discardingthe appliance, remove the batteries and place them in a proper battery
collection container.
CAUTION
LASER SAFETY
CLASS 1 LASER PRODUCT
Use of controls or adjustments, or
performance of procedures other than
those specified herein, may result in
hazardous radiation exposure.
This appliance contains a laser. Only qualified
service personnel should attempt to repair it.
DANGER: INVISIBLE LASER RADIATION
WHEN THE APPLIANCE IS OPEN AND
THE INTERLOCK IS FAILED OR
DEFEATED. AVOID DIRECT EXPOSURE
TO THE BEAM.
CAUTION: HAZARDOUS LASER
RADIATION WHEN THE APPLIANCE IS
OPEN AND THE INTERLOCK IS
DEFEATED.
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT
CAUTION
CLEANING:Always disconnect the appliance from the power supply before attempting to clean it.
Use a soft cloth moistened with soapy water, and wipe gently.
Do not use solvents or abrasive materials.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
5
4
6
8
7
3
1
9
10
12
2
11
19
17
15
13
18
16
14
20
21
12.
1. FUNCTION Switch (CD/RADIO/BUZZER)
2. PLAY/PAUSE Button
3. VOLUME Control
4. LED Display
5. CD Door/REPEAT ALARM
6. CD Door Open Lid
7. POWER Button
8. TUNING Control
9. ALARM 2 Button
10. ALARM 1 Button
11. DISPLAY Button
BAND Switch (AM/FM)
SLEEP Button
PROG Button
RANDOM/REPEAT Button
CLOCK Button
SKIP FORWARD Button
SKIP BACKWARD Button
STOP Button
13.
14.
15.
16.
17.
18.
19.
20.
21.
FM Antenna Wire
AC Power Cord
3
Download from Www.Somanuals.com. All Manuals Search And Download.
22.
23.
Battery Compartment
AUX IN Jack
22
23
POWER SUPPLY
This unit works with AC 120V~60 Hz.
Connect AC power cable to wall outlet with 120V supply.
Insert two 1.5V batteries into battery compartment (22) for time back up in case of
power failure.
1.
2.
RADIO OPERATION
1. Press POWER button (7).
2. Set FUNCTION switch (1) to RADIO position.
3. Tune to your desired station with TUNING Control (8).
4. Adjust VOLUME (3) to suit your personal listening preference.
5. To turn off the unit, press POWER button (7) again.
ANTENNA
This unit has a built-in Ferrite Antenna. For best results - turn unit to improve reception.
AM:
FM:
For FM reception, fully extend the external FM wire antenna (20) and adjust direction for
optimum reception. Do not connect this wire to any outdoor antenna.
CD OPERATION
This unit is capable of playing standard CDs.
1. Press POWER button (7).
2. Select FUNCTION switch (1) to CD position.
3. Lift up the CD door open lid (6) to open CD door (5).
4. Insert a CD disc in the CD compartment with label facing upwards.
5. Close the CD door (5). The total number of tracks will be displayed. If a disc is inserted
incorrectly, dirty, damaged or not music CD - display will show “no” and player will stop.
6. Press PLAY/PAUSE button
(2) to begin playback.
7. Press STOP button (19) to stop playback.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PAUSE
The PLAYBACK can be stopped temporarily at any time by pressing PLAY/PAUSE button
(2) once. Press PLAY/PAUSE button (2) once more to resume playback.
FORWARD/REVERSE/SKIP
1.
Press SKIP FORWARD button
(17) to skip ahead to the beginning of the next track.
Press this button again for each additional track you want to skip.
2.
Press SKIP BACKWARD button
(18) to skip back to beginning of the current track.
Press this button again to the beginning of the previous track.
DISPLAY
In CD or RADIO mode, press the DISPLAY button (11), the display will shown the number of
current tracks and the current station.
RANDOM/REPEAT
The CD player can play “RANDOM”, “REP.”, “REP. ALL” and “RANDOM REP. ALL” by press
RANDOM/REPEAT button (15) repeatedly.
PROGRAM
The programming function is used to pre-set the order of the tracks to be played.
Press the POWER button (7).
Set the FUNCTION switch (1) to the CD position.
1.
2.
3.
4.
5.
Lift up the CD door lid (6) in order to open the CD door (5).
Insert the CD, with the label facing upward.
Close the CD door (5). The total number of tracks on the CD will be shown on the display.
If the disc is inserted incorrectly, or if it is dirty or damaged, or if it is not a music CD, the
display will show “nocd”, and the player will stop.
Press the PROG. button (14). The “01 ” and “PROG ” icon will be shown on the display,
and will be blinking.
6.
7.
Press the SKIP
/
button (17)/(18) in order to choose the track that you would like to
play. Press the PROG. button (14) again in order to finish the programming for the first
track.
Repeat step “ 7 ” in order to program the other tracks. A maximum of 20 tracks can be
programmed.
8.
To clear the program memory, press the STOP button (19).
Once you have finished programming, press the PLAY/PAUSE button (2). The tracks
will play in the programmed order, and the corresponding track number will be displayed.
You can move forward and backwards through the programmed tracks (see Forward/
Backward/SKIP), or temporary stop playback (see Pause). To stop playback, press the
STOP button (19).
9.
10.
11.
Note: Pressing the SKIP
/
button (17)/(18) during programmed playback
will only skip through the tracks that have been programmed.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
AUX IN
You can connect an external audio player to this jack in order to use the playback function.
Note: When a device is connected to the AUX IN jack, the current source from the CD or
RADIO will be cut off automatically.
SETTING THE CLOCK TIME
1.
The CLOCK uses the 12 HR format.
Press and hold the CLOCK button (16). The hour digit will begin to flash. Press the SKIP
2.
/
button (17)/(18) in order to adjust the hour.
Press the CLOCK button (16) again, the minute digit will begin to flash. Press the SKIP
button (17)/(18) in order to adjust the minutes.
3.
/
4. Press the CLOCK button (16) once more in order to confirm the clock setting.
SETTING THE ALARM TIME
1.
This appliance can be set to two ALARM times for CD or RADIO or BUZZER.
2. Set the FUNCTION switch (1) to the CD or RADIO or BUZZER position.
3. Press and hold the ALARM 1 or ALARM 2 button (10) or (9). The hour digit will begin to
flash.
4. Set the ALARM 1 and ALARM 2 time following the same procedure used to set the clock
time.
5.
While CD track flashing, press
/
button to select your desired track for alarm wake-up
Note:
To cancel the ALARM for next day, press the ALARM buttons until the “AL1” or “AL2”
icons disappear from the display.
REPEAT ALARM
When the buzzer sounds or your CD or Radio comes on, you can press the REPEAT ALARM
(5) to turn them off for 6 minutes. The alarm buzzer or radio or CD will then turn itself on
again. This function can be repeated for 60 minutes, it will then be silent until the next alarm
or until the CD/Radio On/Off button has been pressed (this means that your Alarm, Radio or
CD is set to wake you up the same time the following day).
SLEEP
Press the SLEEP button (13), the display will show
“90”
“80” “70”
“10”. Select
the amount of time that you desire. The power will will be turned off when the selected
amount of time has elapsed.
TECHNICAL DETAILS:
Power:
AC 120 V ~ 60 Hz
AM: 540 - 1700 kHz
FM: 88 - 108 MHz
2 x 8 Ohm
Radio Frequency:
Speakers:
6
Download from Www.Somanuals.com. All Manuals Search And Download.
C
TM & MGA Entertainment,Inc.
All Right Reserved. Used under license by
The Singing Machine Co., Inc.
The Singing Machine Company, Inc.
623-0706-ENG01
PRINTED IN CHINA
6601 Lyons Road, Bldg. A7, Coconut Creek, FL33073-9902, USA.
TEL: (954) 596-1000 FAX: (954)596-2000
Download from Www.Somanuals.com. All Manuals Search And Download.
|