TAS5508-5142K7EVM User’s Guide
Evaluation Module for the TAS5508B Digital Audio PWM
Processor and TAS5142 Digital Amplifier
Power Output Stage
User's Guide
June 2006
SLEU071
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1
2
Overview ................................................................................................................... 5
1.1
TAS5508-5142K7EVM Features.................................................................................. 6
PCB Key Map ....................................................................................................... 7
1.2
System Interfaces ...................................................................................................... 9
2.1
2.2
2.3
2.4
2.5
2.6
Power Supply (PSU) Interface (J901 and J900)................................................................ 9
PSU Control Interface (J902) .................................................................................... 10
Loudspeaker Connectors (J101 … J107) ...................................................................... 10
Headphone Connector (J700) ................................................................................... 11
Control Interface (J40)............................................................................................ 11
Digital Audio Interface (J60) ..................................................................................... 13
3
4
Protection ................................................................................................................ 15
3.1
Short-Circuit Protection and Fault-Reporting Circuitry ....................................................... 15
Fault Reporting .................................................................................................... 15
3.2
Related Documentation From Texas Instruments ......................................................... 17
Trademarks ........................................................................................................ 17
Important Notices............................................................................................................... 18
4.1
SLEU071–June 2006
Contents
3
Submit Documentation Feedback
Download from Www.Somanuals.com. All Manuals Search And Download.
List of Figures
1-1
1-2
2-1
2-2
2-3
2-4
2-5
Integrated PurePath Digital™ Amplifier System ......................................................................... 6
Physical Structure for TAS5508-5142K7EVM (Rough Outline) ....................................................... 7
Recommended Power-Up Sequence ..................................................................................... 9
J901 and J900 Pin Numbers ............................................................................................... 9
J902 Pin Numbers ......................................................................................................... 10
J101 . . . J107 Pin Numbers .............................................................................................. 11
J700 Pin Numbers ......................................................................................................... 11
List of Tables
2-1
2-2
2-3
2-4
2-5
2-6
2-7
2-8
3-1
Recommended Supply Voltages........................................................................................... 9
J901 Pin Description....................................................................................................... 10
J900 Pin Description....................................................................................................... 10
J902 Pin Description....................................................................................................... 10
J101 . . . J107 Pin Description............................................................................................ 11
J700 Pin Description....................................................................................................... 11
J40 Pin Description ........................................................................................................ 11
J60 Pin Description ........................................................................................................ 13
TAS5142 Warning/Error Signal Decoding .............................................................................. 15
4
List of Figures
SLEU071–June 2006
Submit Documentation Feedback
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
SLEU071–June 2006
Overview
The TAS5508-5142K7EVM PurePath Digital™ customer evaluation amplifier module
demonstrates two audio integrated circuits, TAS5508B and TAS5142, from Texas
Instruments (TI).
The TAS5508BPAG is a high-performance 32-bit (24-bit input) multichannel PurePath
Digital pulse width modulator (PWM) based on Equibit™ technology, with a fully
symmetrical AD modulation scheme. It accepts an input sample rate from 32 kHz to
192 kHz. The device also has digital audio processing (DAP) that provides 48-bit signal
processing, advanced performance, and a high level of system integration. The device
has interfaces for headphone output and power supply volume control (PSVC).
The TAS5142DKD is a compact, high-power, digital amplifier power stage designed to
drive a 4-Ω loudspeaker up to 100 W/10% THD+N. It contains integrated gate drivers,
four matched and electrically isolated enhancement-mode N-channel power DMOS
transistors, and protection/fault-reporting circuitry.
The DKD package has a PowerPAD™ on the top side for heat transfer through a
heatsink. The heatsink in this design is for evaluation purposes only.
This EVM, together with a TI input-USB board, is a complete 7-channel digital audio
amplifier system, which includes digital input (S/PDIF), analog inputs, interface to PC,
and DAP features, such as digital volume control, input and output mixers, auto mute,
equalization, tone controls, loudness, dynamic range compression, and PSVC output.
There are configuration options for stereo line level output, stereo headphone output,
and power-stage failure protection.
This 6.1 system is designed for home-theater applications, such as A/V receivers, DVD
minicomponent systems, home theater in a box (HTIB), DVD receivers, or plasma
display panels (PDPs).
PurePath Digital, Equibit, PowerPAD are trademarks of Texas Instruments.
SLEU071–June 2006
Overview
5
Submit Documentation Feedback
Download from Www.Somanuals.com. All Manuals Search And Download.
TAS5508-5142K7EVM Features
1.1 TAS5508-5142K7EVM Features
•
•
•
•
•
•
7-channel PurePath Digital evaluation module (double-sided plated-through PCB layout)
Stereo channel line output
Stereo headphone output
Self-contained protection system (short circuit and thermal)
Standard I2S and I2C/control connector for TI input board
Double-sided plated-through PCB layout
2 Channel
Headphone Output
6 Channel
Analog
Input
7 Channel
Speaker Output
TAS5508-5142K7EVM
MODULE
Control Interface
USB
Interface
I2C Bus
Optical
and
I2S
Bus
Coaxia
S/PlDIF
Input
Example
TI Input-USB
board
Power Supply
Figure 1-1. Integrated PurePath Digital™ Amplifier System
6
Overview
SLEU071–June 2006
Submit Documentation Feedback
Download from Www.Somanuals.com. All Manuals Search And Download.
PCB Key Map
1.2 PCB Key Map
PSU
CONTROL
(J902)
PSU
INTERFACE
(J900)
J107
J106
J105
J104
J102
J103
J101
SPEAKER OUTPUTS
SPEAKER OUTPUTS
TAS5508B
HEADPHONE
OUTPUT
(J700)
3.3V
Regulator
CONTROL
INTERFACE (J40)
INPUT SIGNAL
INTERFACE (J60)
Figure 1-2. Physical Structure for TAS5508-5142K7EVM (Rough Outline)
SLEU071–June 2006
Submit Documentation Feedback
Overview
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PCB Key Map
8
Overview
SLEU071–June 2006
Submit Documentation Feedback
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
SLEU071–June 2006
System Interfaces
This chapter describes the TAS5508-5142K7EVM board in regards to power supplies
and system interfaces.
2.1 Power Supply (PSU) Interface (J901 and J900)
The TAS5508-5142K7EVM module must be powered from external power supplies. High-end audio
performance requires a stabilized power supply with low ripple voltage and low output impedance.
Note: The length of power-supply cable must be minimized. Increasing length of PSU cable is
equal to increasing the distortion for the amplifier at high output levels and low
frequencies.
Maximum output-stage supply voltage depends of the speaker load resistance. Please check the
recommended maximum supply voltage in the TAS5142 data sheet.
Table 2-1. Recommended Supply Voltages
VOLTAGE
DESCRIPTION
CURRENT RECOMMENDATIONS
LIMITATIONS
15 V to 20 V
0 V to 32 V
System power supply
0.3 A
6 A(1)
Output-stage power supply
(1)
The rated current correspond to 2-channel full scale (80 W each), which most likely is adequate for
a standard 8-channel amplifier design.
The recommended TAS5142 power-up sequence is shown in the figure below. For proper TAS5142
operation, the RESET signal should be kept low during power up. RESET is pulled low during power up
for 200 ms by the onboard reset generator (U73).
System power supply
Output stage power supply
RESET
>1ms
Figure 2-1. Recommended Power-Up Sequence
4
3
2
1
(PCB connector top view)
Figure 2-2. J901 and J900 Pin Numbers
SLEU071–June 2006
Submit Documentation Feedback
System Interfaces
9
Download from Www.Somanuals.com. All Manuals Search And Download.
PSU Control Interface (J902)
Table 2-2. J901 Pin Description
PIN NO.
NET-NAME AT SCHEMATICS
DESCRIPTION
1
2
3
4
PVDD
SYSTEM
GND
Output-stage power supply
System power supply
Ground
GND
Ground
Table 2-3. J900 Pin Description
PIN NO.
NET-NAME AT SCHEMATICS
DESCRIPTION
1
2
3
4
PVDD
PVDD
GND
Extra output-stage power supply
Extra output-stage power supply
Extra ground
GND
Extra ground
2.2 PSU Control Interface (J902)
This interface is used for onboard sensing of output supply voltage and for the power supply volume
control (PSVC) signal.
5
4
3
2
1
(PCB connector top view)
Figure 2-3. J902 Pin Numbers
Table 2-4. J902 Pin Description
PIN NO.
NET-NAME AT SCHEMATICS
DESCRIPTION
1
2
3
4
5
—
Reserved for future use
Sense of output power supply
Ground
PVDD
GND
RESET
PSVC
System reset (bidirectional)
Power supply volume control signal
2.3 Loudspeaker Connectors (J101 … J107)
CAUTION
Both positive and negative speaker outputs are floating and may not be
connected to ground (e.g., through an oscilloscope).
10
System Interfaces
SLEU071–June 2006
Submit Documentation Feedback
Download from Www.Somanuals.com. All Manuals Search And Download.
Headphone Connector (J700)
2
1
(PCB connector top view)
Figure 2-4. J101 . . . J107 Pin Numbers
Table 2-5. J101 . . . J107 Pin Description
PIN NO.
NET-NAME AT SCHEMATICS
DESCRIPTION
1
2
OUT-1
OUT-2
Speaker negative output
Speaker positive output
2.4 Headphone Connector (J700)
1
2
3
4
Figure 2-5. J700 Pin Numbers
Table 2-6. J700 Pin Description
PIN NO.
NET-NAME AT SCHEMATICS
DESCRIPTION
Right headphone output
Ground
1
2
3
4
OUT-R
GND
—
For future use
OUT-L
Left headphone output
2.5 Control Interface (J40)
This interface connects the TAS5508-5142K7EVM board to a TI input-USB board.
Table 2-7. J40 Pin Description
PIN NO.
NET-NAME AT SCHEMATICS
DESCRIPTION
Ground
—
1
2
3
4
GND
RESERVED
GND
Ground
RESET
System reset (bidirectional). Activate
MUTE before RESET for quiet reset.
5
6
7
BKND-ERR
MUTE
Backend error (or soft reset) provides
reduced click and pop reset, without
resetting I2C volume register settings.
Ramp volume from any setting to
noiseless soft mute. Mute can also be
activated by I2C.
PDN
Power down. TAS5508B will go to
power-down state when activated.
8
9
RESERVED
RESERVED
SDA
—
—
10
I2C data clock
SLEU071–June 2006
Submit Documentation Feedback
System Interfaces
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Interface (J40)
Table 2-7. J40 Pin Description (continued)
PIN NO.
11
NET-NAME AT SCHEMATICS
DESCRIPTION
GND
SCL
Ground
I2C bit clock
12
13
RESERVED
RESERVED
RESERVED
RESERVED
GND
—
14
—
15
—
16
—
17
Ground
—
18
RESERVED
RESERVED
SD
19
—
20
Shutdown error reporting for all
channels. Activated if TAS5142 has
high current or high temperature. See
Chapter 3, Protection.
21
SD
Shutdown reporting. Activated if one or
more TAS5142 has high current or high
temperature. Pin 21 connected to Pin
20. See Chapter 3, Protection.
22
23
OTW
OTW
Temperature warning. Activated if
TAS5142 has reached temperature
warning level.
Temperature warning. Activated if one
or more TAS5142 has reached
temperature warning level. Pin 23
connected to Pin 22.
24
HP-SEL
Headphone select. Headphone active
when LOW and inactive when HIGH. To
use this pin, <100-Ω resistor must be
placed for R50.
25
26
27
28
29
30
31
32
33
34
GND
GND
Ground
Ground
RESERVED
RESERVED
RESERVED
RESERVED
GND
—
—
—
—
Ground
GND
Ground
+5V
+5Vdc power supply (output)
+5Vdc power supply (output)
+5V
12
System Interfaces
SLEU071–June 2006
Submit Documentation Feedback
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Audio Interface (J60)
2.6 Digital Audio Interface (J60)
The digital audio interface contains digital audio signal data (I2S), clocks, etc. Please see the TAS5508B
Data Manual for signal timing and details not explained in this document.
Table 2-8. J60 Pin Description
PIN NO.
NET-NAME AT SCHEMATICS
DESCRIPTION
1
2
GND
Ground
MCLK
Master clock input. Low jitter system
clock for PWM generation and
reclocking. Ground connection from
source to TAS5508B must be a low
impedance connection.
3
4
GND
SDIN1
SDIN2
SDIN3
SDIN4
—
Ground
I2S data 1, channel 1 and 2
I2S data 2, channel 3 and 4
I2S data 3
5
6
7
I2S data 4
8
Reserved
9
—
Reserved
10
11
12
13
14
15
16
GND
SCLK
GND
LRCLK
GND
—
Ground
I2S bit clock
Ground
I2S left-right clock
Ground
Reserved
GND
Ground
SLEU071–June 2006
Submit Documentation Feedback
System Interfaces
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital Audio Interface (J60)
14
System Interfaces
SLEU071–June 2006
Submit Documentation Feedback
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
SLEU071–June 2006
Protection
This chapter describes the short-circuit protection and fault-reporting circuitry of the
TAS5142 device.
3.1 Short-Circuit Protection and Fault-Reporting Circuitry
The TAS5142 is a self-protecting device that provides fault reporting (including high-temperature
protection and short-circuit protection). The TAS5142 is configured in back-end auto-recovery mode and,
therefore, resets automatically after all errors (M1, M2, and M3 are set low). This means that the device
will restart itself after a error occasion and report through the SD error signal.
3.2 Fault Reporting
The OTW and SD outputs from the TAS5142 indicate fault conditions. Please refer to the TAS5142 Data
Manual for a description of these pins.
Table 3-1. TAS5142 Warning/Error Signal Decoding
OTW
SD
0
DEVICE CONDITION
0
0
1
1
High-temperature error and/or high-current error
High-temperature warning
1
0
Undervoltage lockout or high-current error
Normal operation, no errors/warnings
1
The temperature warning signals at the TAS5508-5142K7EVM board are wired-OR to one temperature
warning signal (OTW – pin 22 in control interface connector). Shutdown signals are wired-OR into one
shutdown signal (SD – pin 20 in control interface connector).
The shutdown signals, together with the temperature warning signal, give chip state information as
SLEU071–June 2006
Submit Documentation Feedback
Protection
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Fault Reporting
16
Protection
SLEU071–June 2006
Submit Documentation Feedback
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
SLEU071–June 2006
Related Documentation From Texas Instruments
The following is a list of documents that have detailed descriptions of the integrated circuits used in the
•
•
•
•
•
•
TAS5508B data sheet (SLES162)
TAS5142 data sheet (SLES126)
TPA112 data sheet (SLOS212)
TPS3801K33 data sheet (SLVS219)
LM317M data sheet (SLVS297)
TPS76733 data sheet (SLVS208)
Additional documents
•
•
•
TAS5508-5142K7EVM Application Report (SLEA055)
PC Configuration Tool for TAS5508B (TAS5508 GUI ver. 4.0 or later)
General Application Notes
4.1 Trademarks
Equibit, PurePath Digital, and PowerPAD are trademarks of Texas Instruments.
SLEU071–June 2006
Submit Documentation Feedback
Related Documentation From Texas Instruments
Download from Www.Somanuals.com. All Manuals Search And Download.
17
EVALUATION BOARD/KIT IMPORTANT NOTICE
Texas Instruments (TI) provides the enclosed product(s) under the following conditions:
This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT,
DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a
finished end-product fit for general consumer use. Persons handling the product(s) must have
electronics training and observe good engineering practice standards. As such, the goods being
provided are not intended to be complete in terms of required design-, marketing-, and/or
manufacturing-related protective considerations, including product safety and environmental
measures typically found in end products that incorporate such semiconductor components or
circuit boards. This evaluation board/kit does not fall within the scope of the European Union
directives regarding electromagnetic compatibility, restricted substances (RoHS), recycling
(WEEE), FCC, CE or UL, and therefore may not meet the technical requirements of these
directives or other related directives.
Should this evaluation board/kit not meet the specifications indicated in the User’s Guide, the
board/kit may be returned within 30 days from the date of delivery for a full refund. THE
FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY SELLER TO BUYER
AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY,
INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR
PURPOSE.
The user assumes all responsibility and liability for proper and safe handling of the goods. Further,
the user indemnifies TI from all claims arising from the handling or use of the goods. Due to the
open construction of the product, it is the user’s responsibility to take any and all appropriate
precautions with regard to electrostatic discharge.
EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY
SHALL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES.
TI currently deals with a variety of customers for products, and therefore our arrangement with the
user is not exclusive.
TI assumes no liability for applications assistance, customer product design, software
performance, or infringement of patents or services described herein.
Please read the User’s Guide and, specifically, the Warnings and Restrictions notice in the User’s
Guide prior to handling the product. This notice contains important safety information about
temperatures and voltages. For additional information on TI’s environmental and/or safety
No license is granted under any patent right or other intellectual property right of TI covering or
relating to any machine, process, or combination in which such TI products or services might be
or are used.
FCC Warning
This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT,
DEMONSTRATION, OR EVALUATION PURPOSES ONLY and is not considered by TI to be a
finished end-product fit for general consumer use. It generates, uses, and can radiate radio
frequency energy and has not been tested for compliance with the limits of computing devices
pursuant to part 15 of FCC rules, which are designed to provide reasonable protection against
radio frequency interference. Operation of this equipment in other environments may cause
interference with radio communications, in which case the user at his own expense will be
required to take whatever measures may be required to correct this interference.
Download from Www.Somanuals.com. All Manuals Search And Download.
EVM WARNINGS AND RESTRICTIONS
It is important to operate this EVM within the input voltage range of 0 to 32 V and the output
voltage range of 15 V to 20 V.
Exceeding the specified input range may cause unexpected operation and/or irreversible damage
to the EVM. If there are questions concerning the input range, please contact a TI field
representative prior to connecting the input power.
Applying loads outside of the specified output range may result in unintended operation and/or
possible permanent damage to the EVM. Please consult the EVM User's Guide prior to
connecting any load to the EVM output. If there is uncertainty as to the load specification, please
contact a TI field representative.
During normal operation, some circuit components may have case temperatures greater than
75°C. The EVM is designed to operate properly with certain components above 75°C as long as
the input and output ranges are maintained. These components include but are not limited to
linear regulators, switching transistors, pass transistors, and current sense resistors. These types
of devices can be identified using the EVM schematic located in the EVM User's Guide. When
placing measurement probes near these devices during operation, please be aware that these
devices may be very warm to the touch.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2006, Texas Instruments Incorporated
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements,
improvements, and other changes to its products and services at any time and to discontinue any product or service without notice.
Customers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s
standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should
provide adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask
work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services
are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such
products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under
the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an
unfair and deceptive business practice. TI is not responsible or liable for such altered documentation.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service
voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business
practice. TI is not responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would
reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement
specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications
of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related
requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any
applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its
representatives against any damages arising out of the use of TI products in such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is
solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in
connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products
are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any
non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products
Amplifiers
Data Converters
DSP
Applications
Audio
amplifier.ti.com
dataconverter.ti.com
dsp.ti.com
Automotive
Broadband
Digital Control
Military
Interface
interface.ti.com
logic.ti.com
Logic
Power Mgmt
Microcontrollers
RFID
power.ti.com
Optical Networking
Security
microcontroller.ti.com
Telephony
Low Power
Wireless
Video & Imaging
Wireless
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2007, Texas Instruments Incorporated
Download from Www.Somanuals.com. All Manuals Search And Download.
|