Modular MSOP8 EVM
User’s Guide
September 2003
Data Acquisition
SLAU115
Download from Www.Somanuals.com. All Manuals Search And Download.
EVM IMPORTANT NOTICE
Texas Instruments (TI) provides the enclosed product(s) under the following conditions:
This evaluation kit being sold by TI is intended for use for ENGINEERING DEVELOPMENT OR EVALUATION
PURPOSES ONLY and is not considered by TI to be fit for commercial use. As such, the goods being provided
may not be complete in terms of required design-, marketing-, and/or manufacturing-related protective
considerations, including product safety measures typically found in the end product incorporating the goods.
As a prototype, this product does not fall within the scope of the European Union directive on electromagnetic
compatibility and therefore may not meet the technical requirements of the directive.
Should this evaluation kit not meet the specifications indicated in the EVM User’s Guide, the kit may be returned
within 30 days from the date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE
WARRANTY MADE BY SELLER TO BUYER AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,
IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY
PARTICULAR PURPOSE.
The user assumes all responsibility and liability for proper and safe handling of the goods. Further, the user
indemnifies TI from all claims arising from the handling or use of the goods. Please be aware that the products
received may not be regulatory compliant or agency certified (FCC, UL, CE, etc.). Due to the open construction
of the product, it is the user’s responsibility to take any and all appropriate precautions with regard to electrostatic
discharge.
EXCEPT TO THE EXTENT OF THE INDEMNITY SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE
TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES.
TI currently deals with a variety of customers for products, and therefore our arrangement with the user is not
exclusive.
TI assumes no liability for applications assistance, customer product design, software performance, or
infringement of patents or services described herein.
Please read the EVM User’s Guide and, specifically, the EVM Warnings and Restrictions notice in the EVM
User’s Guide prior to handling the product. This notice contains important safety information about temperatures
and voltages. For further safety concerns, please contact the TI application engineer.
Persons handling the product must have electronics training and observe good laboratory practice standards.
No license is granted under any patent right or other intellectual property right of TI covering or relating to any
machine, process, or combination in which such TI products or services might be or are used.
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265
Copyright 2003, Texas Instruments Incorporated
Download from Www.Somanuals.com. All Manuals Search And Download.
EVM WARNINGS AND RESTRICTIONS
It is important to operate this EVM within the input voltage range of 1.8 VDC to 5 VDC and the
output voltage range of 0 VDC and 5 VDC.
Exceeding the specified input range may cause unexpected operation and/or irreversible
damage to the EVM. If there are questions concerning the input range, please contact a TI
field representative prior to connecting the input power.
Applying loads outside of the specified output range may result in unintended operation and/or
possible permanent damage to the EVM. Please consult the EVM User’s Guide prior to
connecting any load to the EVM output. If there is uncertainty as to the load specification,
please contact a TI field representative.
During normal operation, some circuit components may have case temperatures greater than
30°C. The EVM is designed to operate properly with certain components above 85°C as long
as the input and output ranges are maintained. These components include but are not limited
to linear regulators, switching transistors, pass transistors, and current sense resistors. These
types of devices can be identified using the EVM schematic located in the EVM User’s Guide.
When placing measurement probes near these devices during operation, please be aware
that these devices may be very warm to the touch.
Mailing Address:
Texas Instruments
Post Office Box 655303
Dallas, Texas 75265
Copyright 2003, Texas Instruments Incorporated
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
Read This First
About This Manual
This user’s guide describes the characteristics, operation, and use of the
Modular MSOP8 EVM. This EVM is a multi-device, 12 to 16 bit, SSI, analog
to digital converter Evaluation Module. A complete circuit description, as well
as schematic diagram and bill of materials, are included.
How to Use This Manual
This document contains the following chapters:
Chapter 1—EVM Overview
Chapter 2—Analog Interface
Chapter 3—Digital Interface
Chapter 4—Power Supplies
Chapter 5—EVM Operation
Chapter 6—EVM Bill of Materials and Schematic
Information About Cautions and Warnings
This book may contain cautions and warnings.
This is an example of a caution statement.
A caution statement describes a situation that could potentially
damage your software or equipment.
This is an example of a warning statement.
A warning statement describes a situation that could potentially
cause harm to you.
-3
Download from Www.Somanuals.com. All Manuals Search And Download.
The information in a caution or a warning is provided for your protection.
Please read each caution and warning carefully.
Related Documentation From Texas Instruments
To obtain a copy of any of the following TI documents, call the Texas
Instruments Literature Response Center at (800) 477-8924 or the Product
Information Center (PIC) at (972) 644-5580. When ordering, identify this
booklet by its title and literature number. Updated documents can also be
EVM Compatible Device Data Sheets:
Literature Number:
SBAS110
ADS7816
ADS7817
ADS7818
ADS7822
ADS7834
ADS7835
ADS8320
ADS8321
ADS8324
ADS8325
SBAS230
SBAS078
SBAS062
SBAS098
SBAS102
SBAS108
SBAS123
SBAS172
SBAS226
Application Notes/Additional Literature:
Op Amps for Everyone
Literature Number:
SLOD006
5-6K Interface Board
SLAU104
Single and Bipolar Supply Signal Conditioning Boards
SLAU105
Third Party Tools:
Vendor Website:
HPA449 Development Board (MSP430 Tools)
Speedy 33 (DSP Tools)
FCC Warning
This equipment is intended for use in a laboratory test environment only. It gen-
erates, uses, and can radiate radio frequency energy and has not been tested
for compliance with the limits of computing devices pursuant to subpart J of
part 15 of FCC rules, which are designed to provide reasonable protection
against radio frequency interference. Operation of this equipment in other en-
vironments may cause interference with radio communications, in which case
the user at his own expense will be required to take whatever measures may
be required to correct this interference.
-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1
EVM Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
1.1
1.2
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
2
3
4
Analog Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Digital Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Power Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
4.1
4.2
4.3
ADC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Stand Alone Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Reference Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
5
6
EVM Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
5.1
5.2
5.3
5.4
5.5
Analog Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Digital Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Chip Select (Shut Down) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Digital I/O Buffers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Default Jumper Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
EVM BOM and Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
6.1
EVM Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
Tables
2-1
3-1
4-1
5-1
6-1
Analog Interface Pin Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
Digital Interface Pin Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
Power Supply Pin Out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
List of Jumpers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
Bill of Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
-1
Download from Www.Somanuals.com. All Manuals Search And Download.
-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
EVM Overview
The following section gives a general overview of the Modular MSOP8
evaluation board.
Topic
Page
1.1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
1.2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2
1-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
1.1 Features
Full-featured evaluation board for a variety of single channel, eight pin Mi-
cro SOP, 12 and 16-bit, serial Output, analog to digital converters
On-board reference and buffer circuits
High-speed serial interface
Modular design for use with a variety of DSP and micro controller interface
boards
1.2 Introduction
The Modular MSOP8 Evaluation Module is an updated version of the
Burr-Brown DEM-MSOP8 evaluation board. The EVM is designed so that a
single printed wiring board (PWB) supports a variety of high speed 12 and 16
bit serial ADC’s.
The modular EVM form factor allows for direct evaluation of the ADC’s
performance and operating characteristics. This EVM is compatible with the
rd
5-6K Interface Board (SLAU104) from Texas Instruments and additional 3
party boards such as the HPA449 demonstration board from SoftBaugh, Inc.
(www.hyperception.com).
1-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Analog Interface
For maximum flexibility, the Modular MSOP8 EVM is designed for easy
interfacing to multiple analog sources. Samtec part numbers
SSW-110-22-F-D-VS-K and TSM-110-01-T-DV-P provide a convenient 10-pin
dual row header/socket combination at J1. This header/socket provides
access to the analog input pins of the ADC. Consult Samtec at
options.
Table 2-1.Analog Interface Pin Out
Pin Number
J1.2
Signal
AD_IN+
AD_IN-
Unused
Unused
Unused
Unused
Unused
Unused
REF(-)
REF(+)
Unused
AGND
Description
Noninverting Input (Differential Devices)/Analog Input (Single Ended Devices)
Inverting Input (Differential Devices)/Analog Ground (Single Ended Devices)
J1.4
J1.6
J1.8
J1.10
J1.12
J1.14
J1.16
J1.18
J1.20
J1.15
Pins are unused and should be left open for use with future amplifier and sensor
input modules.
Unused
External Reference Source Input (2.5V NOM, 2.525 MAX)
J1.1- J1.19
(odd)
Analog ground connections (except J1.15)
2-1
Download from Www.Somanuals.com. All Manuals Search And Download.
2-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Digital Interface
The Modular MSOP8 EVM is designed for easy interfacing to multiple control
platforms.
Samtec
part
numbers,
SSW-110-22-F-D-VS-K
and
TSM-110-01-T-DV-P, provide a convenient 10-pin dual row header/socket
combination at J2. This header/socket provides access to the digital control
or 1-800-SAMTEC-9 for a variety of mating connector options.
Table 3-1.Digital Interface Pin Out
Pin Number
Signal
Description
J2.1
CS
Chip Select – Active low signal, enables data transfer – jumper configurable
(see schematic)
J2.3
J2.5
J2.7
SCLK
SCLKR
FS
Serial Clock
Serial Clock Return (for DSP Host systems)
Frame Sync for DSP host systems – alternate Chip Select through JMP2 (see
schematic)
J2.9
FSR
Frame Sync Return (for DSP Host systems)
Serial Data Output
J2.11
J2.13
J2.15
J2.17
J2.19
Unused
SDO
Unused
Unused
SPARE
3-1
Download from Www.Somanuals.com. All Manuals Search And Download.
3-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Power Supplies
The Modular MSOP8 EVM board requires 5 V dc for the analog section. This
includes the voltage reference (U2), the reference buffer (U4), and optionally,
the ADC installed on the EVM (via JMP1). Supply voltages of 1.8 V to 5 V dc
for the digital section are also required. When used in combination with one
of the DAP Interface boards, J3 provides connection to the common power bus
described in document SLAU104. Table 4-1 shows the pin out of J3.
Table 4-1.Power Supply Pin Out
Signal
Pin Number
Signal
Unused
+5VA
1
3
5
7
9
2
4
Unused
Unused
AGND
+VD1
DGND
+1.8VD
+3.3VD
6
8
10
+5VD
When power is supplied to J3, JMP3 allows for one of four different dc voltages
to be applied to the digital sections of the ADC. See the schematic and PWB
silkscreen for details.
Topic
Page
4.1 ADC Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
4.2 Stand Alone Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
4.3 Reference Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
4-1
Download from Www.Somanuals.com. All Manuals Search And Download.
ADC Power
4.1 ADC Power
The device installed on the modular MSOP8 EVM has several options in
regards to its power source. Refer to the schematic for the following
discussion.
JMP1 and JMP3 allow the user to select the power supply used by the ADC.
When JMP1 is in the default factory position (Shunt on pins 1-2), power to the
ADC comes from J3.3 or TP5. Single gate digital buffers (U3, U5, and U6) are
installed on the ADC’s digital input/output lines to allow operation with low
voltage controllers, such as the MSP430. The supply voltage to these buffers
is determined by JMP3 or the voltage applied to TP7.
4.2 Stand Alone Operation
When used as a stand alone EVM, the analog power can be applied to TP5,
referenced to TP6. Digital power can be applied to TP7 referenced to TP4.
While filters are provided for all power supply inputs, optimal performance of
the EVM requires a clean, well-regulated power source.
Caution
The ADC’s that are compatible with this EVM have a variety of
power supply requirements. Check the appropriate data sheets
and verify all power supplies are within the safe operating limits of
the ADC before applying power to the EVM.
4.3 Reference Voltage
The modular MSOP8 can be configured to use the onboard reference/buffer
circuits (U2 and U4) or an external reference applied to J1.20. Jumpers JMP5
and JMP6 control the reference source. In the factory default position (shunt
on JMP5 pins 1-2), a 2.5 V reference is supplied by U2. Moving the shunt at
JMP5 to positions 2-3 allows an external reference applied to J1.20 to be
used.
Caution
The ADC’s that are compatible with this EVM have a variety of
reference requirements. Check the appropriate data sheets and
verify external reference sources are within the safe operating
limits of the ADC before applying power to the EVM.
JMP6 controls the actual application of the reference source to the ADC. Note
that JMP6 is not installed on EVM boards for ADS7818, ADS7834, and
ADS7835 devices. In the factory default position (shunt on pins 1-2), the
reference source is the on board reference/buffer circuit. Moving the shunt on
JMP6 to pins 2-3 allows the voltage applied to the ADC (+Vadc) to be used
as the reference source.
4-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
EVM Operation
The following section provides information in the analog input, digital control,
and general operating conditions of the Modular MSOP8 EVM.
Topic
Page
5.1 Analog Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
5.2 Digital Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
5.3 Chip Select (Shut Down) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
5.4 Digital I/O Buffers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
5.5 Default Jumper Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
5-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Analog Input
5.1 Analog Input
The analog input source can be applied directly to J1 (top or bottom side) or
through optional amplifier and signal conditioning modules. The analog input
range is dependent on the configuration of the EVM and the ADC installed at
location U1. Consult the datasheet for the device to determine the maximum
analog input range.
5.2 Digital Control
The digital control signals can be applied directly to J2 (top or bottom side).
The modular MSOP8 EVM can also be connected directly to a DSP or a micro
controller interface board, such as the HPA449. See the product folder for the
EVM or the installed device for a current list of compatible interface and/or
accessory boards.
5.3 Chip Select (Shut Down)
Jumper JMP2 is provided to allow the selection of the signals applied to the
chip select (/CS) or shutdown (SHDN) pin of the ADC installed on the EVM.
The factory default condition for the EVM is to place a shunt jumper between
pins 1-2 of JMP2. This allows the Frame Sync (FS) signal from DSP host
systems to be used as a chip select for the ADC. This signal originates from
J2.7. When JMP2 is moved to pins 2-3, the /CS (SHDN) signal is applied via
J2.1.
5.4 Digital I/O Buffers
Single gate buffers U3, U5 and U6 are provided to ensure the safe operation
of the modular MSOP8 EVM with low voltage host controllers. The digital I/O
voltage applied to these buffers via JMP3 should be set in accordance with the
operating voltage of the host controller.
5.5 Default Jumper Locations
Table 5-1 provides a list of jumpers found on the EVM and their factory default
conditions.
Table 5-1.List of Jumpers
Jumper
JMP1
JMP2
JMP3
JMP4
JMP5
JMP6
Shunt Position
Pins 1-2
Jumper Description
Controls ADC Supply Voltage (default is +5Va Source)
Controls ADC /CS(SHDN) Pin (default is FS from DSP Host)
Controls Digital I/O Voltage (default is +3.3Vd Source)
Ties ANALOG and DIGITAL grounds together
Pins 1-2
Pins 5-6
CLOSED
Pins 1-2
Controls External Ref. Source (default is +2.5V from U2)
Pins 1-2
Controls REFERENCE Source to ADC (default is onboard reference/buffer
circuit)
5-2
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
EVM BOM and Schematic
The following table contains a complete bill of materials for the modular
MSOP8 EVM bill of materials.
Table 6-1.Bill of Materials
Designators
C2 C3 C4 C13
Description
Manufacturer
Mfg. Part Number
Not Installed
Not Installed
R11
C1
0.47 µF, 0805, ceramic, X7R, 25 V, 10%
0.1 µF, 0805, ceramic, X7R, 50 V, 10%
10 µF, 1206, ceramic, Y5V, 10 V, 10%
10 µF, A case, tantalum, 10 V
15 µH inductor, SMT, 1608 Series
10 Pin, dual row, SMT header (20 [postive)
10 Pin, dual row, SMT socket (20 positive)
5 Pin, dual row, SMT socket (10 posotove)
33 Ω, 0805, 5%, .1W Resistor
0 Ω, 0805, 0.1 W resistor
Panasonic
Panasonic
Panasonic
Panasonic
Inductors, Inc.
Samtec
ECJ-2YB1C474K
C11 C12 C14
C6 C8 C10
C5 C14 C15
L1 L2 L3
ECJ-2YB1H104K
ECJ-3YF1A106Z
ECS-T1AY106R
CTDS1608C-153
TSM-110-01-T-DV-P
SSW-110-22-F-D-VS-K
SSW-105-22-F-D-VS-K
9C08052A33R0JLHFT
9C08052A0R00JLHFT
5001
J1 J2 (top side)
J1B J2B (bottom side)
J3 (bottom side)
R9 R10 R12
R1 R2 R3 R4 R6
TP1 TP2 TP3 TP5 TP7
TP4 TP6
Samtec
Samtec
Yageo America
Yageo America
Keystone
Red test point loop
Black test point loop
Keystone
5000
U1
Varies (see Note)
U2
REF3025
TI
REF3025AIDBZT
SN74LVC1G125DBVT
OPA353NA/250
U3 U5 U6
SN74LVC1G125
TI
U4
OPA353N
TI
JMP1 JMP2 JMP5
JMP6
3 Pin , 2 mm header
Samtec
TMMH-103-C-S-T
JMP3
4 Pin, dual row, TH header (8 positive)
Samtec
TSW-104-07-L-D
Note: The device installed at location U1 is dependent on the EVM ordered. This device is soldered to the board for best perfor-
mance. U1 may be replaced with any device listed in the EVM compatible device data sheets table found at the beginning
of this document.
Topic
Page
6.1 EVM Schematic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
6-1
Download from Www.Somanuals.com. All Manuals Search And Download.
EVM Schematic
6.1 EVM Schematic
The schematic diagram is provided as a reference.
6-2
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
3
4
Revision History
REV
B
ECN Number
Initial Release
Approved
TH
+5Va
C1
0.47uF
D
C
B
A
D
C
B
A
+5Va
+LVa
U2
VIN
+5Va
JMP1
1
C11
0.1uF
2
OUT
J2
3
+V(adc)
R6
GND
1
2
4
6
8
10
U4
JMP5
3
4
SCLK
3
5
7
9
JMP6
R12
33
R9 33
REF3025
1
JMP2
R10 33
SDO
C10
10uF
VREF
OPA353N
11 12
13 14
15 16
17 18
19 20
0 ohm
/CS
C6
10uF
C8
10uF
+V(i/o)
+V(i/o)
C2
NI
R11
NI
C12
0.1uF
U1
U3
R4
R2
2
3
IN+
IN-
TP2
0 ohm
0 ohm
J1
AD_IN+
AD_IN-
1
2
4
6
8
10
6
C4
NI
SDO
SDO
3
5
7
9
R1
R3
SN74LVC1G125
C13
NI
0 ohm
0 ohm
11 12
13 14
15 16
17 18
19 20
C3
NI
REF-
REF+
+V(i/o)
JMP4
U5
TP7
+LVa
+V(i/o)
+
/CS
SN74LVC1G125
L3
L1
15uF
TP1
15uF
C15
10uF
+
C5
10uF
+V(i/o)
+5Va
J3
L2
TP5
1
2
4
6
8
10
U6
3
5
7
9
DGND
AGND
15uF
TP6
TP4
+
C14
10uF
SCLK
SN74LVC1G125
JMP3
ti
DATE:
TP3
12500 TI Blvd. Dallas, Texas 75243
+VD1
+5Vd
+3.3Vd
+1.8Vd
Title:
ADSMSOP8 Evaluation Module
Schematic
Drawn By:
Tom Hendrick
Engineer:
FILE:
SIZE:
REV:
B
31-Jul-2003
Tom Hendrick
B
SHEET:
OF:
EDGE #6450847
1
1
1
2
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.
|