Full Automatic Washing Machine
User's manual
Model:TTL-700
Please read this manual carefully before using.
Retain it for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Names of the parts
Water valve
Water absorption cushion
Top lid B
Top lid A
Lint filter(Installed by user)
Detergent box
Control panel
Filter cover
Inner tub
Pulsator
Power line
Control panel film
Cabinet
Back cover
Adjustable foot lable
Fixed foot(3)
Adjustable foot
Meaning and description of the symbols
Accessories
Bottom plate
(one)
Contents marked with that symbol
are related to the safety of the
Tapping screws
ST4X12-A
(seven)
product and the personal safety
Warning sign
of the users. Please operate in
strict conformity to the contents.
Otherwise, it may cause damage
of the machine or injure the
personal safety of the user.
The end connecting to
the washing machine
Jointer connecting the
water inlet hose and
the water faucet
Water inlet hose
(one)
water inlet
Hose jointer
(one)
Contents marked with that symbol
are actions forbidden to perform.
Performing of those actions may
result in damage of the machine
or injure the personal safety of
the user.
The end connecting to
the water inlet hose jointer
Forbidding sign
Lint filter
(one)
Drain hose hook
(one)
All the pictures in this manual are sketch-map. And because of the continual improvement
of product, so the washing machine and accessories which you received cannot be match
accurately with the sketch map in this manual.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Safety precautions
Please plug the plug on special 220V AC receptacle.
Be sure to use threephase power receptacle. Ensure
the earthing prong of the power receptacle is earth-
ed reliably.Use a leakage protector if possible.
In normal usage of the washing machine, the power
plug shall be ready to be pulled or plugged with hang.
Be sure to pull the plug off and close the water faucet
when occurring power failure, delivering the machine,
setting the machine idle or cleaning the machine, Do
not plug or pull the power plug with wet hand.
Earth
Do not bend, stretch, twist, bind the power cord by force, or reform it.
Do not press or clamp it with heavy items. If the power cord and power
plug are bad, or the receptacle is loose, be sure to have it replaced by
the technicians of our special shop or our agent,or the customer care
department to avoid any risk.Keep the prong of the power plug clean.If
dust is found on the power plug, please wipe it off with dry cloth.
In case the washing machine is installed on ground
with carpet, be careful not to block the ventilation hole
with carpet.
Do not use water with temperature higher than 50
The ventilation holes
at the bottom
soft items
Do not wash waterproof laundry like the raincoat,
bikecovers, etc. To avoid abnormal
vibrations in spinning.
Do not put the machine at damp place like the
bathroom. Never wash it with water. Do not
put wet laundries on the control panel coating.
Do not let the machine share one receptacle with other
electrical appliances. If the plugging into the receptacle
is loose, do not use the plug any more.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Safety precautions
Do not put hand into the rotating tub. It is dangerous
even if the rotation speed is slow. Take special care of
the children. Keep children away from the washing
machine to avoid them climbing on.
Do not decompose, repair or alter the machine
by yourself.
Do not put any hot or heavy items (such as the kettle
with hot water ) on the washing machine.
Do not wash laundries with volatile materials
(such as thinner, petrol etc.)
Petrol
Thinner
The handicapped or children without care shall not
use the machine.
Keep the machine away from direct sunlight and
heat source like the heater.
To protect your laundries and washing machine,
please take out all of the coins, buttons, sand, hairpin
and other foreign materials before washing.
Please keep the lint filter in good condition, and
install it to proper position. If the lint filter is lost
or damaged, please contact the local customer
care department of our company.
Please check if the water faucet is open, and if the
connection of the water inlet pipe is proper. Hang
up the drain pipe.
Install
Dismantle
It is suggested to use foamless washing powder.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Special function introduction
Alarming function when open the cover:
During working except for water and drain, the machine will stop running and
alarm if opens the cover.
Child safety lock program
1. Purpose
Child safety lock program is an added function of the washing machine. The purpose is protecting children
from potential dangerous, which due to children climb onto washing machine and open the top lid, results in
falling into washing tub and drowned. The process of this program as follows: when the child safety lock
program has been started up; then if the top lid is opened, the machine will alarm immediately. If it cannot be
dealt with duly (the way of solving: release child safety lock program), the machine will drain if there has
water in washing tub after 15 seconds. After 10 minutes, the power is off automatically. So this can reach the
purpose of protect children without care from potential dangerous.
2. Start up child safety lock program
The program is optional anytime after the machine has been started. Push and hold PROCEDURE SELECTION
and RESERVATION buttons for more than 2 seconds at the same time. After 2 beep sounds, the child safety
lock program works; all buttons are locked and cannot be selected.
3. Release child safety lock program
Similarly, push and hold PROCEDURE SELECTION and RESERVATION buttons for more than 2 seconds at
the same time. After a beep sound, the child safety lock program is released; all buttons are unlocked.
4. Notice items
# Child safety lock program is an added function. Only when it has been started up, it can work.
# It is necessary for selecting child safety lock program, which the top lid must be closed.
# The top lid cannot be opened after this program has been selected. Once the top lid is opened, the machine
will enter into alarming status. It is necessary to release child safety lock program.
# The child safety lock program can be optional only when the machine has been started.
# After the child safety lock program takes effect, all buttons are locked and cannot be selected. Only when
the program has been released, the buttons can resume its function.
# During start or release this program, the current wash program of washing machine shall not be affected
except for the beep sound.
# The power is off or pull power plug off, the child safety lock program is released automatically. The program
cannot be remembered after the power fails.
Installation and adjustment
Please install and adjust the machine according to the requirement of the manual. It is
very important to your security and correct operating the machine.
Install lint filter
Install bottom plate
After you open the package, please lean the washing
machine gently down on soft items ( like the towel cloth,
blanket, etc. ). Install the bottom plate to the bottom of
the machine with the seven screws by a cross screwdriver,
then lift the machine up gently. See to the figure:
Push lint filter downward to location for lint filter .
Install
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Adjust the installation position
The distance that washing machine away from wall should be above 20mm. The largest allowed slope of the
shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage
of the machine. Please adjust it with following methods:
Confirm it's horizontal:
Hang the lead line to confirm if it is horizontal.
<2
Adjust the adjustable foot:
Adjustable nut
1.To twist the adjustable foot, please first lift up
the side of the foot slightly, loosen the adjustable
nut, and twist the foot.
2.Fasten the nut after adjustment.
Fasten
Low
Adjustable feet
Loosen
High
Usage of the drain hose
The drainage shall be smooth with the drain hose.
1.put the drain hose up to suitable position. Do not put it 2.Do not step on or press the drain hose.
on ground
Notes: the highest point of drain pipe should be higher than
the water level of washing tub for avoiding to siphon
phenomenon during drain.
The highest point
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Install the water inlet hose
Confirm the water faucet
Water faucet, not suitable
Water faucet, suitable
Outlet end surface
>10mm
It is required that the front end shall be longer than 10cm.
The outlet end surface of the faucet shall be flat and smooth. If not please file it
to avoid leakage.
Connection between the water inlet hose jointer and
the water faucet
1.Press the lower end of the lock lever and push down the slider. Take off the water inlet
hose jointer from the water inlet hose component. See to Figure 1.
2.Loosen the screw till the water faucet can be accessed. Put the jointer of the water
inlet hose on the faucet. See to Figure 2. (If the faucet is too large and the jointer can
not be set on the water faucet, please loosen the four screws and take out the
bushing in the jointer. See to the figure.)
Water inlet pipe jointer
Screw
Slider
Mark label
Screwdriver
Liner
Locking lever
Water inlet pipe
Figure 1
Figure 2
Figure 3
3.Fasten the four screws evenly. See to Figure 4.
4.Take off the nameplate. Twist the fastening nut as per the indication of the figure to
seal up the outlet end surface of the faucet. See to Figure 5.
Remarks: Before installation, the threading is 4mm above the upper surface of
the nut. After installation, the threading is 2mm above the upper surface of the
nut. See to Figure 6.
About 4mm before twisting
About below 2mm after twisting
Nut
Figure 4
Figure 5
Figure 6
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Using
Connection between the water inlet hose and the
washing machine
1.Do not take off the water absorption
cushion. Please check if the cushion
is dropped or damaged before each
usage. If it happens please contact
our after-sale department immediately.
2.Put the nut of the water inlet hose on
the valve jointer.
Nut of the water inlet hose
3.Fasten the nut. Swing it gently to
confirm if it's suitable.
Water absorption cushion
Jointer of the water inlet valve
Connection between the jointer of the water inlet
hose and the water inlet hose
1.Push down the slider. Insert the
Jointer of the water
inlet hose
water inlet hose into the jointer.
2.Hang the lock lever to the jointer.
Release the slider till a click
sound is heard.
Locking lever
Slider
Check the connection between the jointer of the
water inlet hose and the water faucet
1.Swing the hose gently to confirm if it is fastened stable.
2.After installation, open the faucet to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if
the connection between the jointer
of the water inlet hose and the water
faucet, and the installation of the
water inlet hose are firm, so as to
prevent dropping from improper
Installation position.
Dismantle the water inlet hose
1.Close the water faucet.
2.Press the locking lever. Push down the slider. Then
Locking lever
pull of the water inlet hose. If the machine is used
more than once every week, the jointer of the water
inlet hose can be kept on the faucet to prevent
Slider
damaging the fixing screw.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
1 Preparation before washing
Preparation before washing
1. Connect the water inlet hose.
2. Confirm that the washing machine is earthed
reliably. Then insert the power plug into the
receptacle. Do not connect the earth terminal
to the gas pipe and tap water pipe.
3. Hang up the drain hose.
Pay attention to followings before washing the laundries
Confirm if there's
special requirement Take out the coins, and zippers.
for the laundries. sand, hairpins etc.
Clear the pocket.
Fasten the buttons The quantity of the
When the pulsator is
running, the buttons of
laundries shall not
exceed the rated value. the laundries may cause
The big laundries like noise. For the sake of
the jeans shall be put discretion, please put
in loosely.
the laundries with
buttons into other
laundries.
A. Check if the laundries are applicable for washing with the machine.
B. For those desrepaired laundries,wash after mending.
C. Seperate the laundries with unfast color from other laundries.
D. Put those laundries difficult to absorb water into water with hand.
E. For those laundries with heavy soil, please first remove the dirt like mud or dust. For the parts with heavy soil,
Please apply detergent in advance, which can make it easier to remove the soil.
F. For those laundries that may get lint ball and those with long fur, turn it over before putting in.
G. Do not put those laundries polluted by chemicals directly into the washing machine.
H. For those small laundries and those may get twisting or worn, and woolen/fur laundries, please put them into
Mesh bag for washing.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
2 Put in the laundries
The capacity of washing and spinning of the
machine refer to the largest weight of the standard
laundries under dry condition that can be washed or
spun in one time. One time washing quantity
shall be lower than the rated capacity. The largest
capacity of this machine is 7.2kg.
The thicknesses, size, type of the cloth will influence
the actual washing capacity. It is suitable for one
time washing to put in reasonable amount of
laundries and the laundries can be turned round in
washing.
Do not select 4 water level or above for laundries
less than 1.0kg, so as to avoid splashing of water.
Reference weight of the laundries:
working suit(up,down)
(cotton, about 1120g)
Jeans(about 800g)
Blanket
cotton, about 900g
blending coat
(about 800g)
Pajamas
(About 200g)
Jacket
(cotton, about
800g)
Shirt
(cotton, about
300g)
single bed sheet
(cotton, about 600g)
Undershirt
(cotton, about 180g)
Socking
(blending, about 50g)
Underpants
(cotton, about 70g)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
3 Add the detergent
Add the detergent and softener into the box
directly as indicated in the left figure.
After adding, please close the detergent box.
See to following table for the dosage of the
detergent.
Location for
concentrated powder
How to use the washing
powder
Direct dissolved in the machine
1.Fill water to "Low" water level.
Detergent box
2.Add the power. Run for 30 seconds to
dissolve it completely.
3.Put in the laundries. Select suitable water level.
The instant dissolving of the washing powder:
1.Prepare warm water of 30 C and a container.
2.Add the powder while stirring to fully
dissolve it.
Howto use the whitener
The powder is more prone to pollute the
laundries than the detergent. Therefore
please use it with proper quantity.
It is suggested not to use high-sudsing
detergent.
Washing powder with poor quality or not used
for a long period may get blocked. Please
clean the detergent box in time.
Fill water to decided level. Dilute the whitener
with container. Pour it slowly into the washing
tub.
Avoid using whitener on laundries with color
or pattern as they are prone to lose color.
The whitener shall not touch the laundries
directly.
Refer to the user's manual for the usage and
quantity of the whitener.
For powder whitener, please dissolve it before
use.
Different washing powders have different
dosage. Please refer to the usage manual of
the washing powder for the details.
4 Close the top lid
If you open the top lid, the machine will stop
working except for water filling and draining.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
5 Use the operation buttons
A. Description of the function of the buttons
Mode and meaning of the indicator light
Flashing: indicate the running program
On: indicate the program about torun, or indicatethe selected mode
Flashing rapidly: indicate abnormal condition
WATER LEVEL SELECTION button
The user selects a suitable water level depending on the load.
If QUICK WASH is selected, water level will indicate 2.
After water level reaches 2, it will wash while water
filling, and wash normally upon the water level reaching 4.
After washing for 1 min, pressing WATER LEVEL button will
enable supplemental water filling, which will stop
automatically upon the water reaching overflow level.
9
7
5
3
1
10
8
STANDARD
JEANS
6
SOAK
4
WASH
RINSE
GENTLE
2
QUICK WASH
SPIN
WATER LEVEL SELECTION
PROGRAM SELECTION
PROCEDURE SELECTION
PROGRAM SELECTION button
You can select from the following four programs.
Normal wash
STANDARD
JEANS
PROCEDURE SELECTION button
Large, thick or heavily soiled laundry
Woolen textiles or underwear
10 min quick wash for load below 2 Kg
With it you can select one or several
GENTLE
processes of soak, wash, rinse and spin.
QUICK WASH
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
POWER ON/OFF button
Press POWER ON/OFF button to connect
power supply.
After power is connected, pressing this
button will cut off the supply.
START/PAUSE button
After the power is switched on, press it to
start the machine
Numeral tube
During working, push it to pause.
During pause, push this button to restart
and go on working.
To indicate -- during sensing.
To indicate remaining min. During program
running.
To indicate remaining reserved time (hrs)
during reservation period.
To indicate fault symbols for abnormal
conditions (see page 17)
Page 17
SURPLUS(MIN)
POWER
ON / OFF
START
PAUSE
+
RESERVATION
Lock
Child safety lock program
RESERVATION button
Start up: The program is optional anytime after the machine hasbeen
started. Push and hold PROCEDURE SELECTION and RESERVATION
buttons for more than 2 seconds at the same time. After 2 beep sounds,
the child safety lock program works; all buttons are locked and cannot
be selected.
Release: push and hold PROCEDURE SELECTION and RESERVATION
buttons for more than 2 seconds at the same time. After a beep sound,
the child safety lock program is released; all buttons are unlocked.
Push the button to select the reserve
washing time from 2 to 24 hours.
Pressing the button, the numeral tube
displays the reserved hours to the wash
cycle end. The point light flashes to
indicate in-reservation.
Remarks: After pressing POWER ON/OFF to connect power supply, if the washing machine
lasts idle more than 10 min, it would automatically shut off the supply.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
B.
Steps of using the operation buttons
and description of the steps
9
7
5
3
1
10
8
STANDARD
JEANS
SURPLUS(MIN)
6
SOAK
4
WASH
RINSE
GENTLE
2
QUICK WASH
SPIN
POWER
ON / OFF
START
PAUSE
WATEEVEL SELECTION
1
PROAM SELECTION
+
PR3OURE SELECTION
SERVATION
Lock
4
6
2
5
1 Push the POWER ON/OFF button to
switch on the power
POWER
ON / OFF
2 Push the PROGRAM SELECTION button to
select the suitable automatic program
PROGRAM SELECTION
After switching on the power, the machine will set to STANDARD program automatically. To select other
program, push the PROGRAM SELECTION button till the corresponding indicator is on. Refer to the
PROGRAM SELECTION button in Page 11.
Page 11
For example: select QUICK WASH for the quick washing of
the laundries with light dirt.
In selecting the STANDARD or JEANS programs, the
machine will execute fuzzy program to control the
complete procedure automatically according to the cloth,
weight and water temperature to select water level,
current and washing time.
3 Push the PROCESS SELECTION button
to select suitable programs
PROCEDURE SELECTION
After switching on the power, the machine will set to wash-rinse-spin program automatically. That is the
most common program. To select other program, push the PROCE DURE SELECTION button to select one or
more programs among soak/wash/rinse/spin. Refer to the Selection method of the procedure programs for
the selection.
Page 11
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
Attention
Even there's no water in the tub, the spinning will start
after a certain period.
Do not use the SOAK program for the woolen laundries.
Wash the laundries that are prone to lose colors
separately from other laundries.
The pulsator will not rotate unless the water is filled to
selected water level.
Selection method of the procedure programs
Times of pushing
PROCEDURE SELECTION
button
Selected procedure
program
Contents(the lighted indicators
indicate the programs about to run)
Applicable procedure
When the common laundries
need washing, rinsing and
spinning.
Soak
Wash Rinse Spin
0
1
2
3
4
5
Wash, rinse, spin
Wash(the washing
liquid remains in the
tub)
Wash, rinse(the
rinsing liquid remains
in the tub)
Repeat using the washing
liquid
Soak
Soak
Soak
Wash Rinse Spin
Wash Rinse Spin
Wash Rinse Spin
Repeat using the washing
liquid
When the laundries need
rinsing and spinning after
manual washing
Rinse, spin
When the laundries need only
spinning after manual
washing (first drain then spin)
If the laundries are very dirty,
or the sleeve and collar are
dirty, first soak then wash
Soak
Soak
Wash Rinse Spin
Wash Rinse Spin
Spin(spin after drain)
Soak, wash, rinse, spin
If you push the PROCEDURE SELECTION button for 6 times, it will resume the original mode, and it will circulate like that.
The soak program can be used as fitting of the STANDARD & JEANS automatic programs. Soak with slight
stirring before wash.
4 Push the WATER LEVEL button to select
suitable water level
WATER LEVEL SELECTION
When the power is switched on, the washing machine will check the cloth automatically. After that,
the water level is set automatically. To select other water level, push the WATER LEVELSELECTION
button in page 11 .
Page 11
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
5 Push the RESERVATION button to
select suitable reserve program
RESERVATION
When the power is switched on, the reservation program is disabled automatically. If you need to finish the
washing in reserved time, please push the RESERVATION button to select suitable program. Refer to the
RESERVATION in Page 12 for selection.
Page 12
Confirm the reservation program
When the reservation program is started, pressing the button,
the numeral tube displays the reserved hours to the wash
SURPLUS(MIN)
cycle end. The point light flashes to indicate in-reservation.
To change the running program or cancel reservation,
you have to switch off the power and make new
selection.
The washing will finish
about 18 hours later
6 Push the START/PAUSE button
START
PAUSE
6 Washing finished
The power will be switched off automatically
after the finishing of the washing.
After Finishing wash,
alarm automatically
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using process
7 Disposal after washing
After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise, it may influence
your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Please rotates detergent box to control panel after
clean it.
The lint filter must be used during washing.
It must be cleaned in time after each using
Lint filter:
1 pull upward to dismantle lint filter;
2 push downward to install lint filter;
3 please clean lint filter after wash.
Install
Dismantle
Dismantle & Install
Clean
The filter screen of the water inlet valve is likely to
be blocked by foreign materials to influence the
water inlet. Please clean it with brush every two
months.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol etc.
1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water completely after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time
(about 1 hour), then close the top lid.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble-shooting Answer to question
(If there's a breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns
sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special
maintenance department or after-sale service department of our company. Do not repair it by yourself.
Phenomena
Reason
How to settle
After the reservation is started,
it rings and the digital tube
displays "E0"
The top lid is not closed
Close the top lid
Is the drain hose blocked by
foreign material?
Is the drain hose frozen?
After long running of pump in the hot
weather, power will be cut automati-
cally for safe.
Clean the foreign material. Open
and close the top lid once.
Clean the frozen material.
Some minutes later the machine will
continue to work
The draining does not work,
or the speed of draining is
too slow. The digital tube
displays "E1" and it rings.
It stops running except water
filling and draining.The digital
tube displays "E2" and it rings.
The top lid is not closed
Close the top lid
The safety switch acts. The
spinning cannot work (after
twice revising). The digital
tube displays "E3" and it rings.
Are the laundries put slantingly?
Is the machine slanting?
Re-order the laundries. Close the top lid.
Level the machine in right position.
Open and close the top lid once.
It does not do water inlet or
the speed is slow (the water
level is not reached after 15
minutes). The digital tube
displays "E4" and it rings.
Is the water faucet open or is
there water supply failure?
Is the water inlet valve is
blocked
Open the water faucet. Open and close
the top lid once.
Clean the water inlet valve. Open and
close the top lid once.
The machine does not act.
(The indicators are off.)
Is there power failure?
Is the power plug loose?
Is the machine slanting?
Use it when the power is on.
Insert the power plug tightly.
Level the machine properly.
Fasten the buttons and zipper
Is there metal material inside
the washing machine?
Are the laundries slanting in
spinning?
There's abnormal sound
inside the machine.
Re-order the laundries. Close the
top lid.
Fasten the jointer screw properly.
Is the jointer screw of the water
inlet hose is loose or twisted awry?
The water faucet leaks.
Common phenomena
Phenomena
Explanation
The spinning is intermittent when it starts.
Pause during washing.
Balance the laundries to avoid slanting.
supplemental water filled after fabric sensor has checked
fabric (about 48 seconds)
The program is setting the drain time. Some
time is needed before it starts spinning.
Select spin, but it doesn't work.
The pulsator pauses during water inlet in
wash and rinse.
It is to avoid splashing during water inlet.
There may be some water flowing out of the
drain hose in the first use of the machine.
It is the water remained in the factory
inspection of performance.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Packing list
Name
Quantity
One
Storage position
Inside the document bag
User's manual
One
One
Lint filter
Inside the document bag
Inside the inner tub
Drain hose hook
Components of the
water inlet hose
Inside the accessory bag
One
Between the upper cushion of the
washing machine package and the
upper seal of the package carton
Bottom plate
One
Tapping screws ST4x12-A
Seven
One
Inside the document bag
Full automatic washing machine
with pump
Specification
Rated washing / spinning capacity
Water level/Water quantity (about)
Injection pressure
7.2kg (weight of standard dry cloth)
1/13L 2/16L 3/24L 4/28L 5/31L
6/34L 7/37L 8/40L 9/43L 10/46L
0.03MPa~0.78MPa
18
Download from Www.Somanuals.com. All Manuals Search And Download.
|