Tekram Technology CRT Television CaptureTV M205 User Manual

USER’S GUIDE  
Rev. 1.1  
07/98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M205 User’s Manual  
n n n CONTENTS  
INTRODUCTION .........................................................................................5  
n KEY FEATURES .....................................................................................................5  
Television on your PC!........................................................................................5  
Live Video Display..............................................................................................5  
Image Capture.....................................................................................................5  
The VideoCapture Utility ....................................................................................6  
Closed captioning (NTSC only)...........................................................................6  
n MINIMUM SYSTEM REQUIREMENTS........................................................................6  
HARDWARE INSTALLATION ..................................................................7  
n COMPONENTS IN THE PACKAGE .............................................................................7  
n HARDWARE INSTALLATION....................................................................................8  
Installing the Capture Card .................................................................................8  
External Connectors on the M205 Card...............................................................8  
Connecting to Cable TV or Antenna....................................................................9  
Connecting the IR Sensor....................................................................................9  
Connecting to External Video Sources (RCA jack) ..............................................9  
Connecting to External Video Sources (S-video)................................................10  
Connecting to Speakers or Headphones .............................................................10  
Connecting to a Sound Card..............................................................................11  
SOFTWARE INSTALLATION ................................................................. 12  
n INSTALLING THE WINDOWS 95 DEVICE DRIVERS ..................................................12  
n INSTALLING THE WINDOWS 98 DEVICE DRIVERS ..................................................13  
n THE AUTORUN SCREEN .......................................................................................14  
n INSTALLING THE VIDEOCAPTURE UTILITY.............................................................15  
VIDEOCAPTURE UTILITY....................................................................... 16  
n APPLICATION WINDOW .......................................................................................16  
n CONTROL PANEL ................................................................................................17  
n VIDEO DISPLAY ..................................................................................................18  
Page 3  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M205 User's Manual  
Selecting the Video Source and Adjusting the Picture Properties .......................18  
Selecting Overlay / Preview Mode .....................................................................19  
Setting the Video Display Size and Format........................................................19  
Selecting View/Capture Mode ...........................................................................20  
Creating New Palette.........................................................................................20  
Displaying Close Captioned Text.......................................................................21  
n VIDEO CAPTURE .................................................................................................22  
Changing the Settings for Video Capture...........................................................22  
Selecting the Audio Format ...............................................................................23  
Selecting the Video Compressor ........................................................................24  
Allocating Memory Space..................................................................................24  
Specifying the File Name for Motion Video Capture..........................................25  
Capturing Motion Video....................................................................................26  
Capturing a Still Image .....................................................................................26  
Copying to the Clipboard...................................................................................26  
n THE TV TUNER ..................................................................................................27  
Show / Hide Control Panel ................................................................................27  
Selecting Antenna / Cable Input ........................................................................27  
Auto Scanning for TV Channels........................................................................27  
Selecting a Channel...........................................................................................27  
Adjusting the Volume........................................................................................27  
Viewing in a Window/Full Screen.....................................................................27  
On Top..............................................................................................................28  
Channel Browsing.............................................................................................28  
THE REMOTE CONTROL ....................................................................... 29  
n USING THE REMOTE CONTROL.............................................................................29  
TROUBLESHOOTING.............................................................................. 30  
n n n APPENDIX....................................................................................... 31  
n DIRECTX 5 INSTALLATION FOR MICROSOFT WINDOWS 95....................................31  
Page 4  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
n n  
                                                
n
                                                   
INTRODUCTION  
1
Congratulations on your purchase of the CaptureTV M205, the video capture and TV  
tuner card! The M205 is actually two cards in one:  
·
A built-in TV tuner brings television to your computer screen, allowing you to  
work and watch TV at the same time.  
·
The Video and Still Image Capture function gives you the ability to capture video  
from various sources, such as your VCR or camcorder, and compose your own  
movies or still photos.  
n Key Features  
Television on your PC!  
The CaptureTV M205 virtually turns your computer into a television set, complete  
with an infra-red Remote Control! You can watch TV in a window while working in  
other applications, or switch to full screen mode (up to 1024´ 768´ 16bit color) for  
leisure viewing. Catch your favorite programs without leaving your computer! Keep up  
with the news or stock prices throughout the day! The M205’s remote control allows  
you to switch between PC and TV mode, adjust the channel, volume and more.  
Live Video Display  
Plug in your camcorder, VCR or laser disk player! The M205 allows you to monitor  
multiple video sources on your computer full screen (640´ 480) or in a window. The  
following video sources are supported and software selectable:  
·
·
·
The Internal TV Tuner (full screen up to 1024´ 768´ 16bit color)  
Composite video: NTSC, and PAL  
S-video: NTSC, and PAL  
Image Capture  
The M205 allows still image capture as well as full-motion capture. Capture images  
from any supported video source to use in pictures, presentations, movies and more!  
Make your own home movies and capture your favorite scenes!  
Page 5  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION  
The VideoCapture Utility  
Lets you watch up to 125 cable television channels and 70 antenna channels in  
smooth, full-motion video in a window or full screen. You can capture still frames and  
movie clips, channel surf, or create your own TV transcripts. Composite Video and S-  
Video inputs support VCRs, video cameras, laser-disc players, video game consoles,  
etc. Still image and live video capturing is easy with a simple mouse click.  
Closed captioning (NTSC only)  
Support including transcript creation and Hot Words that alert you when M205  
application program is broadcasting information that you want to watch.  
n Minimum System Requirements  
·
·
·
32-bit PCI Local Bus system (with PnP)  
CPU 486DX 33Mhz or higher, Pentium CPU recommended  
8MB System RAM or more, 16MB memory and 1GB hard disk recommended for  
motion video capture  
·
·
Windows 95/98  
VGA display in 32K, 64K or 16.7M color mode with hardware assisted video  
playback acceleration and DirectDraw support  
·
·
DirectX 5.0 installed (included in the Tekram Multimedia Drivers & Utilities CD)  
Please refer to page 31 for installation procedure.  
Sound card and speakers required for audio support  
Page 6  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
n n  
                                                
n
                                                   
HARDWARE INSTALLATION  
2
n Components in the Package  
The following components should be included in your CaptureTV M205 box:  
1. CaptureTV M205 board  
2. “Tekram Multimedia Drivers & Utilities” CD-ROM  
3. IR Sensor  
4. Remote Control  
5. Audio Cable (for Sound card)  
Make sure all of the above components are accounted for before you begin the  
installation.  
Page 7  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HARDWARE INSTALLATION  
n Hardware Installation  
Installing the Capture Card  
Important: Handle circuit boards by the edges or bracket. Touch the bare metal of  
your computer case before handling any circuit boards to prevent static discharge  
damage.  
1. Turn OFF all power to your system, including any peripherals (printer, external  
drives, modem, etc.).  
2. Disconnect the power cord and the monitor cable from the back of the computer.  
3. Remove the computer cover. Refer to your system user’s manual for instructions.  
4. Align the gold-fingered edge on your card with an empty PCI expansion slot and  
gently insert it into place. You may need to remove the cover from the rear of the  
PCI expansion slot that you selected.  
5. Replace the screws to secure the card retaining bracket in place.  
6. Replace the computer cover.  
External Connectors on the M205 Card  
Refer to the diagram below while making the connections that follow.  
Page 8  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HARDWARE INSTALLATION  
Connecting to Cable TV or Antenna  
Connecting the IR Sensor  
Connecting to External Video Sources (RCA jack)  
Page 9  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HARDWARE INSTALLATION  
Connecting to External Video Sources (S-video)  
Connecting to Speakers or Headphones  
NOTE: The CaptureTV M205 audio output jack is a low-gain output suitable for  
headphones and powered speakers, as well as an input into stereo systems or other  
types of amplifiers. It is not suitable for driving unpowered external speakers alone.  
Page 10  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HARDWARE INSTALLATION  
If your system already has a sound card, hook the CaptureTV M205 card’s audio  
output to your sound card’s audio input, usually marked “LINE-IN” (sometimes called  
“AUX-IN” or “CD-IN”) with a 1/8” stereo cord, as shown below.  
Connecting to a Sound Card  
Page 11  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
n n n  
SOFTWARE INSTALLATION  
3
n Installing the Windows 95 Device Drivers  
After the capture card is properly installed in the system, power on your system.  
Windows 95 will automatically detect the card as a Multimedia Device upon boot-up,  
and display a “New Hardware Found” screen like the one shown below. Click on  
“Driver Disk from Manufacturer”, insert the Tekram Multimedia Drivers & Utilities  
CD into your floppy drive, specify the path D:\M205 (D: is your CD-ROM drive) and  
follow the on-screen instructions to install the drivers for the capture card.  
After the required files are copied, the system will ask if you wish to restart your  
computer. Select YES to restart.  
Note: The Windows 95 setup screen on your system may look different than the one  
shown above if you have OSR2 / Windows 95 (B) installed.  
Page 12  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOFTWARE INSTALLATION  
n Installing the Windows 98 Device Drivers  
1. After the capture card is properly installed in the system, power on your system.  
Windows 98 will automatically detect the card as a PCI Multimedia Video Device  
upon boot-up, and display a “New Hardware Found” screen, then “Add New  
Hardware Wizard” dialog box will appear like the one shown below.  
2. Then select “Search for the best drive for your device. (Recommended).”  
3. Next select “Specify a location” then type in D:\M205  
4. Follow the on-screen instructions to complete the driver installation.  
Page 13  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOFTWARE INSTALLATION  
n The Autorun Screen  
After rebooting, insert the “Tekram Multimedia Utilities & Drivers” CD-ROM into the  
CD-ROM drive. The Autorun screen will show up. If it does not appear, run  
D:\AUTORUN (where D: is your CD-ROM drive).  
Double-clicking the appropriate product model name M205 brings up the “Function  
Selector” submenu.  
Page 14  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SOFTWARE INSTALLATION  
n Installing the VideoCapture utility  
1. Select Install Application on the Autorun Screen. The following dialog box appears:  
2. In the Installation Directory, type the drive and directory where you want the  
software installed. The default path is C:\CapTV.  
3. Click Continue to start copying of the files.  
4. Click on the Exit button after the installation is complete. The “CapTV” program  
group is added to your Windows desktop, containing the application icons as  
shown:  
Use the Uninstall program when you want to remove this application program.  
Page 15  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
n n n  
VideoCapture UTILITY  
4
The VideoCapture Utility lets you watch television and playing video in a window or  
full screen. This application is also used for capturing still images and full-motion  
video from TV or a video device.  
The VideoCapture utility saves the captured still image as DIB file format. The video  
is saved as AVI file format.  
Note : This application program cannot run under 256 or lower color mode.  
Double-click the CAPTV icon from the “CapTV” program group to start the program.  
The application window and the control panel will appear:  
n Application Window  
Title &  
Information Bar  
Menu Bar  
Display Area  
·
Title and Information Bar: Contains the program name, the standard Windows  
Minimize, Maximize and Exit buttons. Also displays information about actions  
taking place in the window.  
·
·
Menu Bar: Lists the six menus of the program.  
Display Area: The “screen” where your media plays.  
To exit from the program, either click the Exit button on the Title Bar or choose Exit  
from the File menu.  
Page 16  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VideoCapture UTILITY  
n Control Panel  
To show/hide the control panel, check Show Panel from the TV menu.  
1. POWER: Quits the M205  
VideoCapture application.  
2. PC/TV: Switches between viewing in a  
window and full screen. (*)  
3. ICONIC: minimize the program to an  
icon.  
4. CAPTURE MOTION: Captures  
motion video.  
5. CAPTURE STILL: Captures still  
image. (*)  
6. SETUP: Brings up the setup options  
dialog box.  
7. ONTOP: Enable/disable the video  
display window always on the top  
layer.  
8. STYLE: Show/hide the caption board  
and menu bar of the display window.  
The following buttons are for TV tuner use  
only. They are not active when using other  
video source.  
a. AIR/CABLE: Switches between cable TV and antenna (Air) input.  
b. MUTE: Turn off/resume the TV audio.  
c. RECALL: Changes to the previously selected channel.  
d. ENTER: After pressing the numeric keys, press ENTER to complete the channel  
selection.  
e. BROWSE: Displays all available channels. (*)  
f. SCAN: Scans all active channels.  
g. VOLUME: Volume up (right arrow button) and down (left arrow button).  
h. CHANNEL: Channel up (up arrow button) down (down arrow button).  
E
Press the Esc key on your keyboard to return to viewing in a window, resume  
playing the video, or stop browsing the TV channels. Please refer to the  
subsequent sections for details.  
Page 17  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VideoCapture UTILITY  
n Video Display  
Selecting the Video Source and Adjusting the Picture Properties  
From the Options menu, choose Video Source. The Video Source dialog box appears:  
·
·
Video Connector: Select video input source (TV, Composite or S-video).  
Video Standard: Select video system type for the current input source. For proper  
operation, you must make sure that the Video System is correctly set for any given  
Video Source. For instance, your CCD camera may be a PAL device, whereas a  
camcorder or VCR may be a NTSC device.  
*
Changing the video system type brings up the Video Format dialog box. For  
Video Format settings, please refer to later section.  
·
Color: Drag the slide bars to adjust the brightness, contrast, saturation and hue of  
the displayed video.  
Page 18  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VideoCapture UTILITY  
Selecting Overlay / Preview Mode  
Select Overlay or Preview mode from the Options menu. In  
Overlay mode, video is transferred directly from the capture  
card to the memory of the display card without using any CPU  
resources. This results in better on-screen viewing. However,  
the capturing operation automatically uses the Preview mode,  
therefore, the quality of the captured image or video is the  
same regardless of the setting.  
Setting the Video Display Size and Format  
From the Options menu, choose Video Format. The Video Format dialog box appears:  
·
·
Image Dimension: Selects the image display size. Options are 160 x 120 pixels  
(1/4), 320 x 240 pixels (1/2), and 640 x 480 pixels (Full).  
Image Format: Select the image type and the amount of colors it will contain.  
Note: The higher the number of colors and the bigger the window size, the larger the  
size of the AVI file. It is recommended that you keep the image size at the default and  
colors not higher than 16 bits.  
Page 19  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VideoCapture UTILITY  
Selecting View/Capture Mode  
To display video only, select the View Mode from the Options  
menu. In this mode, you can display video full screen or in a  
scalable window, but capture is not allowed. In the Capture  
Mode, you can only display the video in the size you specify in  
the Video Format dialog box described above.  
Creating New Palette  
If the image type of the displayed video is 256 colors (8-bit color) or less, setting a new  
color palette may improve the picture dramatically.  
From the Options menu, choose Make Palette to create a new palette. The following  
dialog box appears:  
·
·
Colors: Specify the number of colors to be contained in the palette.  
Frame: Specify how many frames from which the color is to be selected for the  
palette.  
Page 20  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VideoCapture UTILITY  
Displaying Close Captioned Text  
If you are watching TV in NTSC standard or playing an NTSC videotape containing  
closed captioned material, you can enable the close captioned text to be displayed with  
the video. Choose Video Display from the Options menu. The following dialog box  
appears:  
·
Enable CC: Check this box to display the close captioned text. The text overlays  
the video as in standard TV. Select Channel 1 or Channel 2 for the source of the  
close captioned text.  
·
·
File Name: Specify the text file name for the transcribed closed captioned text.  
Alert Token: Type in this field the word that the program will detect for  
transcribing automatically.  
Page 21  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VideoCapture UTILITY  
n Video Capture  
Note: Make sure that you have selected the Capture Mode under the Options menu.  
Please refer to page 20.  
Changing the Settings for Video Capture  
Choose Capture Settings from the Capture menu to change the preferences for video  
capturing. The dialog box appears:  
* All the values will return to default after exiting the program.  
·
Frame Rate: Number of still video frames that can be captured and converted to  
digital format in one second. A lower frame rate will produce less fluid motion, but  
will result in a smaller AVI file.  
·
·
Video Buffers: If the memory capacity allowed, more buffers will result in higher  
video transfer rate. It is recommended that you leave it at the default value.  
Enable Capture Time Limit: Check this box to specify the maximum recording  
time.  
·
·
Capture Audio: Check this box to capture audio with the video.  
Key to Abort Capture: Select the key to be used for ending video capture.  
Page 22  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VideoCapture UTILITY  
·
·
Mouse to Abort Capture: Select the mouse button to be used for ending video  
capture.  
Hit OK to Capture: By default the  
capturing begin as soon as you choose the  
capture command from the Capture menu.  
Click this check box to have a dialog box  
appear before the capturing start for re-  
confirmation.  
·
Use DOS Memory: With this option  
enabled, the program will try to use the DOS  
memory for faster performance. However, the memory capacity is limited to under  
1 Megabyte.  
Selecting the Audio Format  
With the Capture Audio option enabled (See the previous section), the Audio Format  
command from the Options menu allows you to specify the format of sound you will  
record with your video. The following dialog box will appear:  
Enhancements like Stereo Sound will result in less bandwidth being used for Video  
Recording. Therefore, unless sound is important, keep the settings low or capture only  
the video.  
Page 23  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VideoCapture UTILITY  
Selecting the Video Compressor  
From the Options menu, choose Compression to select the video compression  
algorithm. The dialog box appears:  
·
·
Compressor: Selects the compressor to be used.  
Compression Quality: Sets the compression rate. The higher number will result in  
less distortion but bigger AVI file.  
·
·
Key Frame: The bigger the interval between the key frames, the more the  
distortion will be.  
Configure: Configures the settings for the selected compressor.  
Allocating Memory Space  
Digital video takes up a large amount of  
hard disk space. Before you start to  
capture a movie, check out the available  
hard disk space and set aside a memory  
size for the captured file by selecting  
Allocate File Space from the File menu.  
Page 24  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VideoCapture UTILITY  
Specifying the File Name for Motion Video Capture  
Before capturing a motion video, you should first decide the name of the captured file  
and the location on the hard drive that the image will be stored in, or the file will be  
saved to the default name and path c:\capture.avi  
Choose Set Capture File from the File menu. The following dialog box appears:  
Page 25  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VideoCapture UTILITY  
Capturing Motion Video  
Click Capture Video under the Capture menu to initiate video capture. After the  
movie is saved to disk, you will be shown the amount and percentage of dropped  
frames. After the capturing is complete, the video display will remain still. Click  
Preview or Overlay from the Options menu to resume the playing.  
Capturing a Still Image  
Click Capture Frame from the Capture menu to freeze the motion video. Then click  
Save As DIB File from the File menu to capture the current frame. The captured  
image is saved to the hard disk with the default path and filename:  
c:\tekcap.dib.  
To resume playing the video, press the Esc key on your keyboard.  
Copying to the Clipboard  
To copy the displayed image onto the Clipboard, choose Copy from the Edit menu.  
The image is captured as a bitmap and can be pasted to any application supporting the  
Windows software Clipboard.  
Page 26  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VideoCapture UTILITY  
n The TV Tuner  
Show / Hide Control Panel  
From the TV menu, check Show Panel to display/hide the  
control panel (See page 17). All the options described  
below are also available on the control panel.  
Selecting Antenna / Cable Input  
From the TV menu, click on Air or Cable to select antenna  
(air) or cable input.  
Auto Scanning for TV Channels  
When you click on Auto Scan, the TV Tuner scans for all  
active channels and stores them to a list.  
Selecting a Channel  
You can directly select a channel by clicking on Set  
Channel, the following dialog box appears:  
Key in the desired channel number and click OK.  
For channel up/down, click on Channel Forward / Channel Backward.  
Adjusting the Volume  
Click on Volume Up / Volume Down to adjust the volume. To temporarily stop playing  
the sound, click Mute. Click Mute again to resume playing the sound.  
Viewing in a Window/Full Screen  
To watch TV in a full screen, click on TV Mode, press the Esc key to return to  
Windows.  
Page 27  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VideoCapture UTILITY  
Note: M205 supports full screen viewing up to 1024´ 768´ 16bit color VGA setting,  
however, some problem may occur with certain VGA cards. If you find the image  
centered to the left of the screen and has image residue when refreshing, check the  
option Max 640´480 to solve the problem.  
On Top  
Enable/disable the M205 application window to be always on the top layer.  
Channel Browsing  
To view all channels simultaneously, click Channel Browsing. The option is then  
toggled to Exit Browsing. To stop browsing, click Exit Browsing or press the Esc key  
on you keyboard.  
You may select the channel while browsing by clicking on the desired channel.  
Page 28  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
n n n  
THE REMOTE CONTROL  
5
n Using the Remote Control  
Included with your CaptureTV package is an infrared remote control. To use the  
remote, you must first hook up the IR Sensor, as shown on Chapter 2. You must aim  
the remote at the IR Sensor during use, so it’s recommended that you place the sensor  
near your monitor.  
Following is a summary of the Remote Control’s  
major function buttons:  
·
·
POWER:  
Quits the VideoCapture software.  
SOURCE:  
Switches between TV, S-video and composite  
video sources.  
·
·
PC/VIDEO:  
Switches between full screen and window.  
STILL:  
Freezes the video.  
·
·
·
·
·
·
:
Activates / Stops Channel Browsing.  
AIR / CABLE:  
Switches between cable TV and antenna (Air).  
MUTE:  
Stops / Resumes playing the sound.  
VOL:  
Volume up/down  
CH/TK:  
Channel up/down  
RECALL:  
Changes to the previously selected channel.  
* Reserved for future function expansion.  
Page 29  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
n n  
                                                
n
                                                   
TROUBLESHOOTING  
6
The following troubleshooting tips may help you if you experience problems. Contact  
your dealer for more advanced troubleshooting information.  
Basic Troubleshooting Tips  
·
Check that the card is seated properly in its expansion slot. If the problem still  
exists, try a different PCI expansion slot.  
·
·
·
Ensure the monitor cable is securely fastened to the card.  
Make sure that the monitor and computer are plugged in and receiving power.  
Disable any built-in graphics capabilities on your mainboard. For more  
information, see your computer documentation.  
·
·
Make sure that you selected the appropriate monitor when you install your VGA  
enhanced driver.  
Because a typical computer system consists of many different parts, difficulties  
may arise from a combination of items. Check the following list and find a  
symptom that's similar, then try the suggested solution.  
Video is unstable  
·
Check that you're using the correct broadcast standard format (NTSC, PAL, or  
SECAM).  
·
Check the quality of your incoming TV signal on another receiver; bad reception  
may be the cause.  
Video is in black and white only  
·
Check the connectors setting to make sure you've selected the correct input  
(CATV, Composite, or S-Video) for your video source device.  
No video or audio  
·
Check that the audio and video connectors are securely plugged into the correct  
jacks.  
·
·
·
Check that the Tekram Video Player card is securely seated in its slot.  
Check that the VGA enhanced driver is installed.  
Check the audio cables to make sure all connectors are securely plugged into the  
correct jacks.  
·
·
Ensure that another Windows audio program is not muting the sound.  
Check the mixer line input selling in the audio software provided with your  
sound card.  
Page 30  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
n n n APPENDIX  
n DirectX 5 Installation for Microsoft Windows 95  
1. Ensure that Windows 95 is up and running properly.  
2. Insert the Tekram Multimedia Drivers & Utilities CD-ROM into your CD-ROM  
drive.  
3. Under Start… Run of the task bar, TYPE in X:\DIRECTX5\DIRECTX\DXSETUP  
(X is the letter of your CD-ROM drive). The following dialog box will appear:  
4. Check “Direct 3D Hardware Acceleration Enabled” option and then click the  
“ReInstall DirectX” button.  
5. Restart Windows 95 to complete installation.  
Page 31  
M205 User’s Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Think Outside Mouse G981 User Manual
Toshiba Computer Monitor TR2015X User Manual
Toshiba CRT Television 30HF66 User Manual
TRENDnet Network Router TEW 413APBO User Manual
Uniden Marine RADAR CXAI 5198 User Manual
Uniden Two Way Radio uh095sx User Manual
Unitron Hearing Aid Hearing Aid Ziel BTE User Manual
Universal Gas Heater 150 FASNG User Manual
ViewSonic Flat Panel Television N1750w User Manual
VTech Electronic Keyboard Sing Piano User Manual