BB-210CE
Owner’s
Handbook
CD/MP3/USB Boombox
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INFORMATION
Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as the power-supply cord
or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
Warning: To reduce the risk of fire or electrical shock,
do not expose this product to rain or moisture. The
product must not be exposed to dripping and splashing
and no object filled with liquids such as a vase of
flowers should be placed on the product.
IMPORTANT
CAUTION!
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communication. However, this
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one of the following measures:
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
This symbol indicates that there are important
operating and maintenance instructions in
the literature accompanying this unit.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present
within this unit.
-
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
No naked flame sources such as candles should be
placed on the product.
Caution: Changes or modifications not expressly
approved by the manufacturer could void the user’s
authority to operate this device.
Caution: Usage of controls or adjustments or
performance of procedures other than those specified
herein may result in hazardous exposure.
-
-
Connect the equipment into an outlet on
circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV
technician for help.
a
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a slightly damp cloth.
Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Do not install or operate near any heat sources such
as radiators, stoves, or other apparatus that produce
heat.
ELECTRICAL INFORMATION
Mains Supply: The mains operating voltage of this unit
is marked on a rating plate on the rear of the unit.
The means of disconnecting this appliance from
the mains supply is the mains plug. This should be
unobstructed and readily operable at all times.
WARNING: DANGER OF RADIATION
These labels tell you that the unit contains a laser
component. Opening the CD compartment lid and
defeating the safety interlocks will expose the user to
radiation from the laser beam. Do not stare into the
laser while it is operating.
Unplug this apparatus during lightning storms or when
unused for long periods of time.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
INTRODUCTION
PRELIMINARIES
INDEX
INDEX
The BB-210CE is a full-function, stereo Boombox for replay of
CD and MP3/WMA files stored on a CD-ROM, USB flash drive
or SD card.
UNPACKING
Carefully unpack the unit.
Important safety information..................................1
Introduction ............................................................2
Unpacking ...............................................................2
Controls and connections.........................................3
Fitting batteries.......................................................5
Connecting power ...................................................5
Listening to the radio ..............................................6
Setting the volume..................................................6
CD/MP3/WMA display .............................................7
Playing a CD.............................................................7
Playing MP3/WMA music files.................................8
Program play...........................................................9
Playing and recording cassettes.............................10
Troubleshooting ....................................................11
Care & Maintenance...............................................11
Specifications ........................................................11
Warranty ...............................................................11
CONTENTS
The 2-band radio receives FM stereo and AM bands, and the
built-in cassette recorder will record from the source that is
playing.
The BB-210CE may be powered from the AC mains or by
batteries for portable use.
The carton should contain:
•
•
•
The BB-210CE Boombox
Power cord
Operating Manual
If any items are missing or damaged, contact your nearest
TESCO store for a replacement. Have your receipt ready when
you call.
Retain the packaging. If you dispose of it, do so having regard
to any recycling regulations in your area.
Retain the User Handbook. If you pass the unit on to a third
party make sure you pass on the handbook.
LOCATION
Place the unit on dry stable surface away from heat and
damp and where it is unlikely to fall or be knocked over.
Download from Www.Somanuals.com. All Manuals Search And Download.
2
CONTROLS AND CONNECTIONS
TOP VIEW
a
b
c
d
e
f
g
h
i
Volume control
Function (source) switch
SD Card slot
USB connector
Telescopic aerial
CD loading door
Carrying handle
Band switch
1) Tuning scale
1! Finger lift for CD door
1@ Record key (cassette)
1# Play key (cassette)
1$ Rewind key (cassette)
1% Fast forward key (cassette)
1^ Stop/Eject key (cassette)
1& Pause key (cassette)
Tuning control
Download from Www.Somanuals.com. All Manuals Search And Download.
3
CONTROLS AND CONNECTIONS
FRONT VIEW
BACK VIEW
a
Battery cover
AC mains inlet
b
a
b
c
d
e
Stop button (CD/MP3/USB/SD)
Mode button (CD/MP3/USB/SD)
Skip back button (CD/MP3/USB/SD)
Power indicator
f
g
h
i
FM stereo indicator
Skip forward button (CD/MP3/USB/SD)
Album button (MP3/USB/SD)
Play/pause button (CD/MP3/USB/SD)
CD display
1) Cassette loading door
Download from Www.Somanuals.com. All Manuals Search And Download.
4
BATTERY OPERATION
AC MAINS OPERATION
FITTING BATTERIES
1. Unclip the two battery cover latches and remove the
battery cover.
FITTING BATTERIES
Referring to the previous section, fit 6 x ‘C’/’UM2’ batteries
into the battery compartment.
Remove the batteries if the unit will not be used for a long
time to avoid the danger of leakage.
NOTE: Never mix old and new batteries or batteries of
different types. Batteries should always be replaced as sets.
CONNECTING POWER
•
Check that the mains voltage marked on the rating plate
on the back panel is the same as the voltage in your
area.
•
•
Plug the AC power cord into the AC inlet
Plug the mains plug into the wall socket and switch the
mains power on.
POWER CONTROL/FUNCTION
BATTERY DISPOSAL
The power control switch is combined with the function
selector, located on the left side of the unit.
Dispose of used batteries with regard to the recycling
regulations in your area. Do NOT short circuit batteries or
throw them into water, the general rubbish or in a fire.
Weak batteries can leak and damage the unit. Replace them
in good time!
2. Fit two ‘C’/’UM2’ batteries into the lower battery
compartment, observing polarity as shown.
To turn the radio on:
•
Slide the FUNCTION SELECTOR to the RADIO position.
To play CD/MP3/USB/SD:
•
Slide the FUNCTION SELECTOR to the CD/MP3/USB/SD
position.
To turn the cassette player on:
•
Slide the FUNCTION SELECTOR to the TAPE/OFF position.
The power will switch on automatically when a cassette
function key is pressed.
3. Fit 4 x ‘C’/’UM2’ batteries into the upper battery
compartment, observing polarity as shown.
To turn the unit off:
•
Slide the FUNCTION SELECTOR to the TAPE/OFF position.
Check that the cassette player is set to ‘STOP’.
4. Re-fit the battery cover.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
LISTENING TO FM RADIO
LISTENING TO AM RADIO
ADJUSTING THE VOLUME
To listen to FM radio:
To listen to AM radio:
To increase the volume:
•
•
Fully extend the telescopic aerial at the back of the unit.
Move the FUNCTION selector on the left side to select
the RADIO position.
Move the BAND selector on the top panel to the FM ST.
(FM stereo) position.
Turn the TUNING control to select the station you want
(the FM frequency scale is the outer scale marked in
MHz).
•
•
•
Move the FUNCTION selector on the left side to select
the RADIO position.
Move the BAND selector on the top panel to the AM
position.
Turn the TUNING control to select the station you want
(the AM frequency scale is the inner scale marked in
kHz).
•
Rotate the VOLUME control wheel on the left side towards
the back of the unit.
To decrease the volume:
•
•
•
Rotate the VOLUME control wheel on the left side towards
the front of the unit.
•
Fine adjust the tuning so that the station plays clearly.
•
Fine adjust the tuning so that the station plays clearly.
You may be able to improve the clarity of the sound by
rotating the radio until the sound is clearest.
If you can hear a lot of background noise when playing the
station, the signal may be weak.
You may be able to improve the signal strength by adjusting
the position of the telescopic aerial or moving the radio to a
different position.
NOTE:- It is not necessary to extend the telescopic aerial
when listening to AM radio.
If this doesn’t help and the noise persists, switching to FM
mono reception will reduce the background noise.
To switch to FM mono:
Move the BAND slide switch to the FM position.
NOTE:- FM mono will not give the spatial sound benefits of
FM stereo, but will always play with less background noise.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
PLAYING A CD
CD/MP3/WMA DISPLAY FEATURES
The front panel display shows track and play mode status
when playing CDs or MP3/WMA music files from a disc or
from flash media.
SELECTING CD OPERATION
PLAYBACK CONTROL
Play/pause:
•
Move the FUNCTION selector on the left side to select
the CD/MP3/USB/SD position.
The display on the front panel will light.
•
Press the PLAY/PAUSE button to toggle between play
and pause mode during playback.
LOADING/REMOVING A DISC
Before loading a disc for the first time:
Stopping playback:
• Press the STOP button during playback.
•
Lift the CD door to open the CD loading bay and remove
any transit packing that may be fitted to protect the CD
player in shipping.
Playback will stop. The total number of tracks will be
displayed.
Selecting tracks:
Loading a CD:
•
Press the SKIP+ or SKIP- button briefly to select the
next or previous track. Pressing SKIP- while playing a
track will replay the current track.
•
•
•
Remove any USB or SD card media that is inserted.
Lift the CD door to open the CD loading bay.
Holding the disc by the edges, place the disc on the
turntable in the centre of the CD loading bay with the
label uppermost. Press the centre of the disc into place
on the turntable with a click.
The track number being played will be displayed.
Fast search:
•
Press and hold the SKIP+ or SKIP- button to fast search
forward or backward through a track.
•
Gently close the CD door.
The track will search at high speed.
a
b
c
d
e
f
g
h
i
Play indicator (flashes when paused)
SD card indicator
USB drive indicator
MP3 format indicator
Repeat mode indicator
WMA format indicator
Repeat all indicator
The unit will read the disc and briefly display the total number
of tracks on the disc before commencing play automatically
Repeat/random play:
•
During playback, press the MODE button repeatedly to
cycle through the available modes shown below -
Removing a disc:
•
•
•
Ensure that the disc is stopped.
Lift the CD door to open the CD loading bay.
Holding the disc by the edges, lift the disc off the
turntable and place it back in the case.
Gently close the CD door.
The mode selected will be shown on the display.
Random indicator
Program indicator
•
Selecting‘Repeat 1’will continuously repeat the current track.
Selecting‘Repeat All’will continuously repeat the entire disc.
Selecting‘Random’will play all tracks in a random sequence.
1) Album indicator (MP3/WMA only)
1! Track/album number digits
Download from Www.Somanuals.com. All Manuals Search And Download.
7
PLAYING MP3/WMA FROM A CD-ROM OR FLASH MEDIA
MP3/WMA MUSIC FILE COMPILATIONS
LOADING A MP3/WMA COMPILATION CD-ROM
Selecting tracks:
•
Press the SKIP+ or SKIP- button briefly to select the
next or previous track. Pressing SKIP- while playing a
track will replay the current track.
This unit will also play MP3/WMA music file compilations.
These are normally created on a computer and saved to a CD-
ROM, a USB Flash drive or SD Card.
MP3/WMA compilation CD-ROMs are loaded and unloaded
in the same way as CDs. Ensure that there is no Flash Media
inserted and refer to the section‘LOADING/REMOVING A DISC’
on the previous page.
The track number being played will be displayed.
File organisation:
Selecting albums:
The files on the CD-ROM or flash media may be organised in
the following ways -
LOADING FLASH MEDIA
Loading a USB drive or SD card containing MP3/WMA
files:
•
•
•
Press the ALBUM button to display the current album
number.
Continue pressing the ALBUM button repeatedly to step
through the albums in the compilation.
NOTE: Album selection is only possible if the files on the
media have been organised into albums.
•
•
•
All music tracks stored in the ‘root’ directory of the CD-
ROM/Flash Media. In this case, all tracks will be played in
a numerical/alphabetical order.
•
If a disc is loaded, remove it before loading the USB drive/
SD card. Ensure the CD door is closed.
•
Insert the USB drive or SD card into the correct slot on the
top panel. Note that the slots are polarised.
Music tracks saved as albums into separate folders on the
CD-ROM/Flash Media. In this case, each complete album
will play in numerical/alphabetical order.
The unit will read the flash media and the display will briefly
show the total number of tracks on the media.
Fast search:
Press and hold the SKIP+ or SKIP- button to fast search
forward or backward through a track.
•
A compilation may also have a combination of the above
with some tracks stored in the ‘root’ directory and some
stored in album ‘folders’. In this case, the tracks in the
‘root’ directory will play first, followed by the albums,
played in sequence.
PLAYBACK CONTROL
The track will search at high speed.
Playback control is the same for all compilations, whether
stored on a CD-ROM or Flash Media. Once a compilation
is loaded, play will start automatically. The MP3 or WMA
indicator on the display will indicate the type of music file
being played.
Repeat/random play:
•
During playback, press the MODE button repeatedly to
cycle through the available modes shown below -
NOTE: MP3 andWMA files may be mixed within a compilation.
The player will switch automatically to play these as the
format changes.
Play/pause:
SELECTING MP3/WMA OPERATION
•
Press the PLAY/PAUSE button to toggle between play
•
Move the FUNCTION selector on the left side to select
and pause mode during playback.
The mode selected will be shown on the display.
the CD/MP3/USB/SD position.
The display on the front panel will light.
•
•
•
•
‘Repeat 1’will continuously repeat the current track.
‘Repeat Album’will repeat the album currently playing.
‘Repeat All’will continuously repeat the compilation.
‘Random’ will play all tracks on the entire disc/flash
media in a random sequence.
Stopping playback:
Press the STOP button during playback.
•
Playback will stop. The total number of tracks will be
displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
PROGRAM PLAY
You can store a program selection of up to 20 tracks from a CD
or 99 tracks from an MP3/WMA compilation to play in your
preferred sequence.
•
To save this track into the program sequence, press the
MODE button.
The display will show 02 flashing, indicating that you are now
entering the second track in the program sequence.
•
To set a program:
Repeat the previous two steps (three steps if you want to
change album) until you have stored all the tracks in the
program sequence.
•
Load a CD or MP3/WMA compilation and wait for it to
read.
Play will begin automatically.
•
Press the STOP button to stop playback (programming is
only possible when stopped).
Playing the program:
•
Press the PLAY/PAUSE button to start the program
•
Press the MODE button.
playing.
The display will show the PROG symbol and P01 flashing (the
position of this track in the program).
The PROG symbol will remain on and the program will begin
to play.
Selecting tracks:
•
You can navigate through the tracks stored in the
program by pressing the SKIP+ or SKIP- button.
Clearing the program:
Press the STOP button twice.
The PROG symbol will switch off.
•
•
If you are playing a MP3/WMA compilation of albums,
you can optionally change the album number to program
by pressing the ALBUM button repeatedly (skip this step
if you are programming a CD).
•
Select the track number you want to program by pressing
the SKIP+ or SKIP- button.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
PLAYING AND RECORDING CASSETTE TAPES
You can play cassette tapes in the cassette player. You can
also record on cassettes from the CD or radio.
Three types of cassette tapes are generally available - Normal
(IEC I), Chrome (IEC II) and Metal (IEC IV). The cassette
player will play all three types, but Normal cassettes are
recommended for recordings.
Fast forward and reverse:
Protecting a tape from accidental recording:
You can protect a cassette from accidental over-recording as
follows -
•
Press the F.FWD or RWD key to move quickly forwards or
backwards to a different position on the cassette tape.
Press the STOP/EJ. key to cancel fast forward or
reverse.
•
•
Hold the cassette with the side you want to protect
facing you.
NOTE:- The automatic shut off feature will not operate for fast
forward or reverse functions. Always wait by the unit when
using these functions and switch off manually if the end
of the cassette is reached. The unit may be damaged if fast
forward or reverse is left to run unattended.
Loading a cassette:
•
•
Press the STOP/EJ. key to open the cassette door.
Place a cassette tape into the loading door with the
exposed tape facing upwards and the side you want to
play facing towards you.
Recording from the CD player, flash media or radio:
Using the record function, you can record a radio program or
from CD/MP3/USB/SD onto a cassette tape.
•
Close the cassette loading door gently.
Removing a cassette:
•
•
•
Select the function that you want to record from (CD/
MP3/USB/SD or radio).
Load the cassette tape that you want to use for the
recording.
•
If a cassette is playing, press the STOP/EJ. key to stop
playback.
Press the STOP/EJ. key to open the cassette door.
Lift the cassette out of the loading door.
Close the cassette loading door gently.
•
•
Using a small screwdriver, break out the tab at the left of
the cassette as shown.
It will not now be possible to depress the recording
button if an attempt is made to record on this side of the
tape.
•
•
•
Press the PAUSE key
The key will lock down.
Press the REC key.
Playing a cassette:
•
•
NOTE:- The recording function can be re-enabled if required
by sticking adhesive tape over the slot in the tape.
Move the FUNCTION slide switch on the left side to
select the TAPE/OFF position.
Load a cassette tape.
The PLAY key will also lock down automatically.
The player is now paused, ready to record.
•
•
•
If recording from a CD, start the CD playing. If recording
from the radio, wait until the moment the program
begins.
Press the PAUSE key to begin recording.
To pause a recording while it is in progress, press the
PAUSE key at any time.
Press the PLAY key.
The tape will begin to play. The player will switch off
automatically when the tape has finished playing,
•
•
Pausing a cassette during play:
•
The key will latch down and playback will pause.
To re-start tape playback, press the PAUSE key again.
Press the PAUSE key.
•
When you have finished recording, press the STOP/EJ.
key to cancel record mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
TROUBLESHOOTING
CARE AND MAINTENANCE
WARRANTY&SPECIFICATIONS
Poor quality radio reception
SPECIFICATIONS
CARE AND CLEANING
The aerial signal may not be adequate. Try repositioning the
telescopic aerial (FM band) or rotating the unit (AM band).
Supply Voltage, AC mains :......220-230 V~, 50Hz
Supply Voltage, Battery :.........9V (C/UM2 x 6)
Power consumption ................12.5W
Frequency range .....................88-108MHz (FM)
540-1600kHz (AM)
All care and cleaning operations should be carried out with
the unit unplugged from the mains power.
The surface of the unit can be cleaned with a barely damp
cloth and then dried carefully. Never use abrasives, abrasive
cloths or chemical solvents .
Skipping when playing a CD/CD-ROM
The CD playing surface may be dirty or marked with finger
prints. Try cleaning the CD with a CD cleaner.
Net Weight:.............................1.9kg
Music files from a computer will not play
The music files may not be a compatible format. Check that
they are MP3 or WMA format.
The music files may be protected WMA files. If so, these will
be skipped during play.
Class II construction double insulated.
This product must not be connected to earth.
UK: Waste electrical products/batteries should
not be disposed of with household waste.
Separate disposal facilities exist, for your near-
in-store for details.
ROI: Produced after 13th August 2005. Waste
electrical products/batteries should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
Poor quality sound when playing cassettes
The cassette tape head may be dirty. Use a tape head cleaning
kit to clean the tape head.
The cassette RECORD key will not depress
The cassette may be a pre-recorded music cassette or
another cassette with the record protection tab removed. Use
a different cassette for the recording or use adhesive tape to
defeat the record protection (see page 10).
WARRANTY
Your Tesco appliance is covered by a warranty for 12 months
from the date of purchase. If a fault develops during this
period, please contact the TESCO electrical help line on 0845
456 6767. Please have your original purchase receipt with
you when you call. This warranty in no way affects your
consumer rights.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Te sco Stores Ltd,
Delamare Road, Cheshunt, Herts, EN8 9SL
BB210CE V0.1
Technika Helpline: 0845 456 6767 (Calls cost up to 4p per minute from a BT landline, other providers may vary)
Download from Www.Somanuals.com. All Manuals Search And Download.
|