Technika Flat Panel Television LCD40 920 User Manual

OPERATING INSTRUCTIONS  
LCD40-920  
COLOUR TELEVISION WITH REMOTE CONTROL  
For assistance, please call our Tesco Electrical Helpline on 0845 4566767  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features  
• Remote controlled colour LCD TV.  
Accessories  
• Fully integrated digital TV (DVB-T).  
• HDMI connectors for digital video and audio. This  
connection is also designed to accept high denition  
signals.  
EPG  
SCREEN  
LANG  
SUBTITLE  
SLEEP  
ABC  
1
DEF  
GHI  
3
2
• 200 programmes from VHF, UHF(analogue).  
• 300 programmes for digital mode (IDTV).  
• OSD menu system.  
JKL  
MNO  
PQR  
4
6
5
VWX  
8
STU  
YZ  
Batteries: 2 X AAA  
7
9
FAV  
T
V
D
T
V
0
V
• Two scart sockets for external devices (such as  
video, video games, audio set, etc.).  
P
• Stereo sound system. (German+Nicam)  
Teletext, fastext, TOP text.  
• Headphone connection.  
O
K
M
• Automatic programming system.  
• Forward or backward manual tuning.  
• Sleep timer.  
Instruction Book  
Remote  
Controller  
• Child lock.  
• Automatic sound mute when no transmission.  
• NTSC playback.  
Introduction  
• PIP / PAP / PAT functions.  
• AVL (Automatic Volume Limiting).  
Thank you for choosing this product. This manual will  
guide you for the proper operation of your TV.  
Before operating the TV, please read this  
manual thoroughly.  
• When no valid signal is detected, after 5 minutes the  
TV switches itself automatically to standby mode.  
• PLL (Frequency Search).  
• PC input.  
Please do keep this manual in a safe place for  
future references.  
• Plug&Play for Windows 98, ME, 2000, XP, Vista.  
• Audio line out.  
Preparation  
For ventilation, leave a free space of at least 10 cm  
all around the set. To prevent any fault and unsafe  
situations, please do not place any objects on top  
of the set.  
• Game Mode (optional).  
• Active antenna power (optional).  
Use this device in moderate climates.  
1
0
c
m
English - 2 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 22  
17.02.2010 14:17:06  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Batteries should not be exposed to excessive heat  
such as sunshine, re or the like.  
Safety Precautions  
Please read the following recommended safety  
precautions carefully for your safety.  
Lightning  
In case of storm and lightning or when  
going on holiday, disconnect the power  
cord from the wall outlet.  
Power Source  
The TV set should be operated only from a 220-240  
VAC, 50 Hz outlet. Ensure that you select the correct  
voltage setting for your convenience.  
Replacement Parts  
When replacement parts are required, make sure that  
the service technician has used replacement parts,  
which are specied by the manufacturer or have the  
same specications as the original one. Unauthorized  
substitutions may result in re, electrical shock or  
other hazards.  
Power Cord  
Do not place the set, a piece of furniture, etc. on the  
power cord (mains lead) or pinch the cord. Handle the  
power cord by the plug. Do not unplug the appliance  
by pulling from the power cord and never touch the  
power cord with wet hands as this could cause a short  
circuit or electric shock. Never make a knot in the cord  
or tie it with other cords. The power cords should be  
placed in such a way that they are not likely to be  
stepped on. A damaged power cord can cause re or  
give you an electric shock. When it is damaged and  
needs to be replaced, it should be done by qualied  
personnel.  
Servicing  
Please refer all servicing to qualied  
personnel. Do not remove the cover  
yourself as this may result in an  
electric shock.  
Waste Disposal  
Instructions for waste disposal:  
Moisture and Water  
• Packaging and packaging aids are recyclable and  
should principally be recycled. Packaging materials,  
such as foil bag, must be kept away from children.  
Do not use this device in a humid  
and damp place (avoid the bathroom,  
the sink in the kitchen, and near the  
washing machine). Do not expose this  
device to rain or water, as this may be  
dangerous and do not place objects  
filled with liquids, such as flower  
vases, on top. Avoid from dripping  
or splashing.  
• Batteries, including those which are heavy metal-  
free, should not be disposed of with household  
waste. Please dispose of used battery in an  
environment friendly manner. Find out about the  
legal regulations which apply in your area.  
• Cold cathode fluorescent lamp in LCD PANEL  
contains a small amount of mercury; please follow  
the local laws or regulations for disposal.  
If any solid object or liquid falls into the cabinet, unplug  
the TV and have it checked by qualied personnel  
before operating it any further.  
Information for Users in European Union  
Countries  
Cleaning  
This symbol on the product or on its  
packaging means that your electrical  
and electronic device should be  
disposed at the end of its service  
life separately from your household  
wastes. There are separate collection  
systems for recycling in EU.  
Before cleaning, unplug the TV set  
from the wall outlet. Do not use  
liquid or aerosol cleaners. Use soft  
and dry cloth.  
Ventilation  
The slots and openings on the TV  
For more information, please contact the local  
authority or the dealer where you purchased the  
product.  
set are intended for ventilation and to ensure reliable  
operation. To prevent overheating, these openings  
must not be blocked or covered in anyway.  
Disconnecting the Device  
Heat and Flames  
The mains plug is used to disconnect TV set from  
the mains and therefore it must remain readily  
operable.  
The set should not be placed near  
to open flames and sources of  
intense heat such as an electric  
heater. Ensure that no open ame  
sources, such as lighted candles,  
are placed on top of the TV.  
English - 3 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 33  
17.02.2010 14:17:07  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Headphone Volume  
Excessive sound pressure from  
earphones and headphones can  
cause hearing loss.  
Installation  
To prevent injury, this device must be  
securely attached to the wall in accordance with the  
installation instructions when mounted to the wall (if  
the option is available).  
LCD Screen  
The LCD panel is a very high technology product with  
about a million thin lm transistors, giving you ne  
picture details. Occasionally, a few non-active pixels  
may appear on the screen as a xed blue, green or  
red point. Please note that this does not affect the  
performance of your product.  
Warning  
Do not leave your TV in standby or operating mode  
when you leave your house.  
English - 4 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 44  
17.02.2010 14:17:07  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview of the Remote Control  
1. Standby  
2. Yellow / Feature menu / Current language  
(*) (in DTV mode)  
3. Blue / Install menu / Favourite mode (*) (in  
DTV mode)  
4. PIP / PAP mode  
5. Guide (in DTV mode)  
6. Sleep timer  
EPG  
SCREEN  
LANG  
SUBTITLE  
SLEEP  
GHI  
3
ABC  
1
DEF  
7. Subtitle on-off / TXT subtitle  
8. Numeric buttons  
9. TV – Digital TV mode  
10. Volume up  
2
PQR  
JKL  
MNO  
4
6
5
VWX  
8
YZ  
STU  
7
9
11. Programme up / Page down (in DTV  
FAV  
D
T
V
0
mode)  
V
12. AV / Source selection  
13. Info / Reveal (in TXT mode)  
P
14. Return / Exit (in DTV mode) / Index page  
(in TXT mode)  
15. Cursor up / Page up (in TXT mode)  
16. Cursor right  
17. OK / Select / Freeze picture / Hold (in TXT  
mode)  
18. Cursor down / Page down (in TXT mode)  
19. Menu on-off  
O
K
20. Cursor left / Subpage (in TXT mode)  
21. Previous Programme / Swap  
22. Picture mode selection  
M
23. Programme down / Page up (in DTV  
mode)  
24. Mute  
25. Volume down  
26. Favourite mode (in DTV mode)  
27. Mono-Stereo / Dual I-II / Current language  
(in DTV mode) (*)  
28. Image size / Expand (in TXT mode)  
29. Teletext / Mix / PAT  
30. Update (in TXT mode)  
(*) Only for EU country options.  
31. Red / Sound menu / Channel list (in DTV  
mode)  
32. Green / Picture menu / Subtitle on-off (in  
DTV mode) (*)  
English - 5 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 55  
17.02.2010 14:17:08  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LCD TV and Operating Buttons  
1. Standby button  
2. TV/AV button  
3. Programme Up/Down buttons  
4. Volume Up/Down buttons  
Note: Press “  
” / “  
buttons at the same time to view  
main menu.  
Viewing the Connections- Back Connectors  
12  
1. S/PDIF Digital Out outputs digital audio signals of the currently watched source.  
Use a digital optic cable to transfer audio signals to a device that has S/PDIF input.  
2. Subwoofer Out is for connecting an external, active subwoofer to the set to give a much deeper bass  
effect.  
Use an appropriate RCA cable to connect the set to a subwoofer unit.  
3. Audio Line Outs output audio signals to an external device such as an optional sound system.  
To connect the external speakers to your TV, use AUDIO LINE OUTS of the TV with an audio cable.  
4. SCART 2 inputs or outputs for external devices.  
English - 6 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 66  
17.02.2010 14:17:08  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. SCART 1 inputs or outputs for external devices.  
Connect the SCART cable between SCART sockets on TV and SCART socket on your external  
device (such as a decoder, a VCR or a DVD player).  
Note: If an external device is connected via the SCART sockets, the TV will automatically switch to  
AV mode. If both sockets are employed at the same time, SCART 1 will override SCART 2 unless  
manually selected.  
Note: You should connect the decoder to EXT-1, if you are planning to watch a scrambled channel.  
The decoder might not function properly if you do not connect the decoder to the Scart 1 (Ext-1) socket  
Note: Picture state can be affected by scart cable quality.  
6. Component Video Inputs (YPbPr) are used for connecting component video.  
You can connect the component video and audio sockets with a device that has component output.  
Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and  
the component video outputs of your device. While connecting, be sure that the letters on your TV, Y”,  
Pb”, “Pr” correspond with your device’s connectors.  
7. PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that connects to the  
TV via YPbPr.  
Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of your PC to  
enable PC audio.  
Connect the audio cable between AUDIO INPUTS on the TV and audio outputs of your device to  
enable component audio.  
8. S/PDIF Coaxial Out outputs digital audio signals of the currently watched source.  
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input.  
9. RF Input connects to an antenna or a cable.  
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the  
device to the television with an appropriate antenna cable, as shown in the illustrationin the following  
pages.  
10. PC Input is for connecting a personal computer to the TV set.  
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.  
11. HDMI 2: HDMI Input  
12. HDMI 1: HDMI Input  
HDMI Inputs are for connecting a device that has an HDMI socket. Your LCD Television is capable of  
displaying High Denition pictures from devices such as a High Denition Satellite Receiver or DVD Player.  
These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept  
either 720p or 1080i signals. No sound connection is needed for an HDMI to HDMI connection.  
When you use the wall mount kit (optional) with the LCD TV, we would denitely recommend to plug all your  
cables into the back of the LCD before mounting to the wall.  
English - 7 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 77  
17.02.2010 14:17:09  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing the Connections - Side Connectors  
1. CI Slot is used for inserting a CI card. A CI card allows you to  
view all the channels that you subscribe to. For more information,  
see “Conditional Access” section.  
2. Headphone jack is used for connecting an external headphone to  
the system. Connect to the HEADPHONE jack to listen to the TV  
from headphones (optional).  
3. Video Input is used for connecting video signals of external  
devices.Connect the video cable between the VIDEO IN socket  
on the TV and the VIDEO OUT jack on your device.  
4. Audio Inputs are used for connecting audio signals of external  
devices. Connect the audio cable between the AUDIO INPUTS  
on the TV and the AUDIO OUTPUT jacks on your device. Note: If  
you connect a device to the TV via the VIDEO INPUT, you should  
also connect your device with an audio cable to the AUDIO  
INPUTS of the TV to enable audio.  
Aerial Connection  
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.  
English - 8 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 88  
17.02.2010 14:17:09  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• You may also connect through the SCART 1 or  
SCART 2. Use a SCART cable as shown below.  
Power Connection  
IMPORTANT: The TV set is designed to operate on  
Note: These three methods of connection perform the  
same function but in different levels of quality. It is not  
220-240V AC, 50 Hz.  
• After unpacking, allow the TV set to reach the  
ambient room temperature before you connect the  
set to the mains.  
necessary to connect by all three methods.  
• Plug the power cable to the mains socket outlet.  
Connecting the LCD TV to a PC  
For displaying your computer’s screen image on  
your LCD TV, you can connect your computer to the  
TV set.  
C
o
m
p
o
n
e
n
t
C
o
m
p
o
n
e
n
t
a
u
d
i
o
v
i
d
e
o
S
c
a
r
t
s
o
c
k
e
t
s
H
D
M
I
i
n
p
u
t
s
i
n
p
u
t
s
• Power off both computer and display before making  
any connections.  
i
n
p
u
t
s
• Use 15-pin D-sub display cable to connect a PC to  
the LCD TV.  
• When the connection is made, switch to PC source.  
See “Input selection” section.  
D
V
D
P
l
a
y
e
r
REAR VIEW  
Settheresolutionthatsuitsyourviewingrequirements.  
Resolution information can be found in the appendix  
parts.  
Using Side AV Connectors  
You can connect a range of optional equipment  
to your LCD TV. Possible connections are shown  
below. Note that cables shown in the illustration are  
not supplied.  
A
u
d
i
o
P
C
I
n
p
u
t
I
n
p
u
t
s
P
C
a
u
d
i
o
c
a
b
l
e
P
C
R
G
B
c
a
b
l
e
• For connecting a camcorder, connect to the VIDEO  
IN socket and theAUDIO SOCKETS. Do not connect  
the camcoder to VIDEO IN socket at the same time  
since it can cause noise in the picture. For selecting  
the related source, see the section “Input selection”  
in the following parts.  
(
n
o
t
s
u
p
p
l
i
e
d
)
(
n
o
t
s
u
p
p
l
i
e
d
)
t
o
A
U
D
I
O
I
N
P
U
T
S
t
o
P
C
i
n
p
u
t
o
n
t
h
e
T
V
To listen the TV sound from headphones, connect  
to the HEADPHONE jack of theTV.  
H
e
a
d
p
h
o
n
e
Connecting to a DVD Player  
C
a
m
c
o
r
d
e
r
If you want to connect a DVD player to your LCD  
TV, you can use connectors of the TV set. DVD  
players may have different connectors. Please refer  
to your DVD player’s instruction book for additional  
information. Power off both the TV and the device  
before making any connections.  
Note: Cables shown in the illustration are not  
supplied.  
• If your DVD player has an HDMI socket, you can  
connect via HDMI. When you connect to DVD player  
as illustrated below, switch to HDMI source. See,  
“Input Selection” section.  
• Most DVD players are connected through  
COMPONENT SOCKETS. Use a component video  
cable to connect video input. For enabling audio,  
use a component audio cable as illustrated below.  
When the connection is made, switch to YPbPr  
source. See, “Input selection” section.  
English - 9 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 99  
17.02.2010 14:17:11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Other Connectors  
Inserting Batteries in the  
Remote Control Handset  
• Remove the battery cover located on the back of  
the handset by gently pulling backwards from the  
indicated part.  
You can connect a range of optional equipment  
to your LCD TV. Possible connections are shown  
below. Note that cables shown in the illustration are  
not supplied.  
To connect external speakers, use an audio cable.  
Do not reverse theAUDIO LEFT andAUDIO RIGHT  
jacks. Turn on the LCD TV and external speaker set  
after all connections are made. Refer to your speaker  
set’s manual for further queries.  
• Insert two AAA/R3 or equivalent type batteries  
inside. Place the batteries in the right directions and  
replace the battery cover.  
• For connecting a to a device that has SPDIF support,  
use an appropriate SPDIF cable to enable sound  
connection.  
E
x
t
e
r
n
a
l
S
p
e
a
k
e
r
s
Note: Remove the battery from remote control  
handset when it is not to be used for a long period.  
Otherwise it can be damaged due to any leakage of  
batteries.  
Remote range is approximately 7m/23ft.  
A
d
e
v
i
c
e
t
h
s
a
t
Switching the TV On/Off  
To Switch the TV On  
s
u
p
p
o
r
t
S
P
D
I
F
s
i
g
n
a
l
.
• Connect the power cord to the 220-240V AC, 50  
Hz.  
• Press STANDBY switch. Then the standby LED  
lights up.  
To switch on the TV from standby mode either:  
Connecting Other Equipment via  
Scart  
Most devices support SCART connection. You can  
connect a; DVD recorder, a VCR or a decoder to your  
LCD TV by using the SCART sockets. Note that cables  
shown in the illustration are not supplied.  
• Press the “ ” button, P+ / P- or a numeric button  
on the remote control.  
• Press the -P/CH or P/CH+ button on the TV. The TV  
will then switch on.  
Note: If you switch on your TV via PROGRAMME  
UP/DOWN buttons on the remote control or on the  
TV set, the programme that you were watching last  
will be reselected.  
Power off both the TV and the devices before making  
any connections.  
For more information, refer to your device’s own  
instruction book.  
By either method the TV will switch on.  
To Switch the TV Off  
S
c
a
r
t
s
o
c
k
e
t
s
• Press the “ ” button on the remote control or  
press the STANDBY switch, so the TV will switch  
to standby mode.  
To power down the TV completely, unplug the  
power cord from the mains socket.  
Note: When the TV is switched to standby mode,  
standby LED can blink to indicate that features such  
as Standby Search, Over Air Download or Timer is  
active.  
D
e
c
o
d
e
r
D
V
D
R
e
c
o
r
d
e
r
V
i
d
e
o
R
e
c
o
r
d
e
r
English - 10 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 1100  
17.02.2010 14:17:12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation with the Remote Control  
Input Selection  
Once you have connected external systems to your  
TV, you can switch to different input sources.  
• The remote control of your TV is designed to control  
all the functions of the model you selected. The  
functions will be described in accordance with the  
menu system of your TV.  
• Press “SOURCE” button on your remote control for  
directly changing sources.  
• Functions of the menu system are described in the  
following sections.  
or,  
• Select “Source” option from the main menu  
by using “ ” or “ ” button. Use then “ ” or  
Volume Setting  
• Press “V +” button to increase the volume. Press “V  
-” button to decrease the volume. A volume level  
scale (slider) will be displayed on the screen.  
” button to highlight an input and press “ ” button  
to select.  
Note: You can mark desired source options by  
pressing the OK button. Therefore, when SOURCE”  
button is pressed, only the marked source options will  
be available (except for the TV source).  
Programme Selection (Previous or Next  
Programme)  
• Press “P -” button to select the previous programme.  
• Press “P +” button to select the next programme.  
Programme Selection (Direct Access)  
• Press numeric buttons on the remote control to select  
programmes between 0 and 9. The TV will switch  
to the selected programme. To select programmes  
between 10 - 299 (for IDTV) or 10-199 (for analogue),  
press the numeric buttons consecutively. The limit  
of the delay time is 3 seconds.  
• Press directly the programme number to reselect  
single digit programmes.  
Initial Settings  
When the TV is turned on for the rst time, the menu  
for the language selection appears on the screen. The  
message “Welcome please select your language!”  
is displayed in all language options sequentially in  
the OSD.  
Basic Operations  
You can operate your TV using both the remote  
control and onset buttons.  
Operation with the Buttons on the TV  
Volume Setting  
By pressing the “ ” or “ ” buttons highlight the  
language you want to set and press OK button. After  
then, “First time installation” OSD will appear on the  
screen.  
• Press “  
” button to decrease volume or “  
” button to increase volume, so a volume level scale  
(slider) will be displayed on the screen.  
Programme Selection  
• Press “P/CH +” button to select the next programme or  
P/CH -” button to select the previous programme.  
By pressing “ ” or “ ” buttons, select the country  
you want to set and press OK button. button (** for  
EU countries).  
Viewing Main Menu  
• Press “  
” / “  
” buttons at the same time  
Note: Country selection OSD will not be available  
for UK.  
to view main menu. In the Main menu select sub-  
menu using “P/CH -” or “P/CH +” buttons and enter  
the sub-menu using “  
To learn the usage of the menus, refer to the menu  
system sections.  
After then, the active antenna selection OSD appears  
on the screen:  
” or “  
” buttons.  
By pressing “ ” or “ ” buttons, set active antenna  
mode as on or off.  
AV Mode  
• Press the “TV/AV” button in the control panel on the  
TV to switch between AV modes.  
English - 11 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 1111  
17.02.2010 14:17:12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If an active antenna is connected to your TV, you Select your Country, Language and Text language  
can select this option as On. Antenna power should by using “ ” or “ ” and “ ” or “ ” buttons. Press  
be “Off” when standard antenna is used instead of OK or RED button to continue. To cancel, press the  
the active antenna. See Conguration Menu in the BLUE button.  
following sections for more information.  
For more information on this process, see “Install  
Press OK button on the remote control to continue Menu” section.  
and the following message will be displayed on the  
screen:  
Note: For proper functioning of digital teletext in DTV  
mode, you should set country as UK in analogue  
AUTO PROGRAM (for UK only).  
General Operation  
Pressing the “TV/DTV” button at any time while  
watching television programmes will switch the TV set  
between the digital terrestrial television broadcasting  
and its normal analogue broadcasting.  
To select the “Yes” or “No” option, highlight the  
Information Banner  
item by using “ ” or “ ” buttons and press the OK  
button.  
• Whenever you change channel, using the P- / P+  
button or the numeric buttons, the TV displays the  
broadcast picture along with an information banner  
at the bottom of the screen (available only in DTV  
mode). This will remain on the screen for a few  
seconds.  
The IDTV will automatically tune to the UHF or VHF  
(** for EU countries) transmission channels, searching  
for digital terrestrial TV broadcasts and displaying the  
names of channels found. This process will take about  
a few minutes. To cancel searching, you can press the  
M” button at any time during the process.  
• The information banner can also be displayed at any  
time while watching TV by pressing the INFO button  
on the remote control:  
After Automatic Search is completed, the following  
message asking for analogue channel search appears  
on the screen:  
Hint: Not all channels broadcast the programme  
data. If the name and time of the programme are not  
available, then information banner will be displayed  
with blanks.  
If the selected channel is locked, you must enter the  
correct four numeric code to view the channel. “Enter  
PIN” will be displayed on the screen in such a case:  
To search for analogue channels, select “Yes”. TV  
switches to the analogue TV mode. The menu below  
is displayed to search for analogue channels:  
Electronic Programme Guide  
(EPG)  
• Some, but not all, channels send information about  
the current and next events.  
• Please note that event information is updated  
automatically. If there is no event information data  
available in channels, EPG will be displayed with  
blanks.  
English - 12 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 1122  
17.02.2010 14:17:13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Press EPG button to view the EPG menu.  
following warning message display on the screen (*  
for UK only):  
• Electronic Programme Guide appears on the screen.  
It is able to get Information of the channel - programs  
weekly by means of 7-DAY-EPG. All programs of  
channels are displayed. On the bottom of the screen;  
info bar, showing all the available commands, will  
be displayed.  
Digital Teletext (** for UK only)  
• Press the TELETEXT ( ) button.  
• The digital teletext information appears.  
• Operate it with the coloured buttons, cursor buttons  
and OK button.  
The operation method may differ depending on the  
contents of the digital teletext.  
Follow the instructions displayed on digital teletext  
screen.  
RED button (Shrink): makes the info boxes  
smaller.  
• When Press “SELECT” button or similar message  
appears on the screen, press the OK button.  
GREEN button (Expand): makes the info boxes  
larger.  
• When the TELETEXT ( ) button is pressed, the  
TV returns to television broadcasting.  
YELLOW button (Prev. Day): displays the  
programmes of previous day.  
• With digital terrestrial broadcasting (DVB-T), in  
addition to digital teletext broadcasting together with  
the normal broadcasting, there are also channels  
with just digital teletext broadcasting.  
BLUE button (Next day): displays the programmes  
of the next day.  
INFO (Details): displays the programmes in detail.  
Numeric buttons (Jump): go to preferred channel  
directly via numeric buttons.  
• The aspect ratio (picture shape) when watching  
a channel with just digital teletext broadcasting is  
the same as the aspect ratio of the picture viewed  
previously.  
OK : views options for future programmes.  
SWAP : jumps to the current boradcast.  
• When you press the TELETEXT ( ) button again,  
the digital teletext screen will be displayed.  
• Press “0” button to view Guide Search menu. Using  
this feature, you can search the programme guide  
database in accordance with the genre selected or  
with name match.  
Analogue Teletext  
Use of teletext and its functions are identical to  
the analogue text system. Please do refer to the  
TELETEXT” explanations.  
Note: Searching process can be performed by the  
desired date rate or by the channel basis.  
Displaying Subtitles  
Widescreen  
With digital terrestrial broadcasting (DVB-T), some  
programmes are broadcast with subtitles.  
Depending on the type of the broadcast being  
transmitted, programmes can be viewed in a number  
(** of formats. Press the “SCREEN” button repeatedly to  
select between to change zoom mode.  
Note: You can enable subtitles by pressing the  
for UK) or GREEN (* for EU countries)buttons.  
Press the “M” button to display the main menu, When Auto is selected, the format being displayed is  
highlight the Setup and then Language menu using determined by the picture being broadcast.  
” or “ ” button and press the OK button to display  
PLEASE NOTE: Menu size changes depending on  
the chosen image size.  
the “Language settings” menu.  
Highlight the “Subtitle” item in “Language settings”  
menu and use ” or “ button to set Subtitle to the  
desired language.  
If “Subtitle” is on and a language option is set,  
pressing the TELETEXT ( ) button causes the  
English - 13 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 1133  
17.02.2010 14:17:13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Moving the channels in the channel list  
IDTV Menu System  
The IDTV menu can only be viewed when watching  
• Press “ ” or “ ” buttons to select the channel that  
will be moved.  
digital terrestrial broadcasting. Press the “  
” button to turn IDTV on while the TV is in analogue  
mode.  
• Press “ ” or “ ” buttons to select the “Move” item  
on Channel List menu.  
Press the “M” button. The menu below appears on  
the screen:  
Note: If you enter the same programme number  
of the channel that you want to move, “.... channel  
services will be replaced. Do you want to continue?”  
OSD will be displayed. Press OK to conrm or select  
“No” to cancel.  
Deleting the Channels in the Channel List  
• Press “ ” or “ ” button to select the channel that  
will be deleted.  
Channel List  
Using the “ ” or “ ” button on the remote control,  
make sure that the first item, Channel List, is  
highlighted and press the OK button to display the  
Channel List.  
• Press “ ” or “ ” button to select the “Delete’’ item  
on Channel List menu.  
Channel List is the place where the channels are  
managed.  
Press the OK button to delete the highlighted channel  
in the channel list. Then the message below appears  
on the screen:  
Navigating the Entire Channel List  
Press “ ” or “ ” button for selecting the previous or  
next channel. You can press P+ or P- button to move  
page up or page down.  
To watch a specic channel, highlight it using “  
or “ ” button and then press “OK” button, while the  
“Select” item on Channel List menu is highlighted by  
using “ ” or “ ” button.  
Press “ ” or “ ” button to highlight the desired option.  
If OK button is pressed while “Yes” is highlighted, the  
highlighted channel is deleted. Selecting “No” cancels  
the deletion.  
Then the name and number of the selected channel  
will be displayed in the top-left and top-right of  
the channel display at the top-right of the screen,  
respectively.  
English - 14 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 1144  
17.02.2010 14:17:14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Renaming Channels  
Setting Favourites  
To rename a specic channel, the channel must To set a favourite you should highlight the “Favourites”  
be highlighted by pressing “ ” or “ ” button. Then item at the bottom of the Channel List menu. Then  
highlight the Edit Name item by pressing “ ” or “  
press OK button and Edit Favourite List menu appears  
” button as illustrated below. Press the OK button to on the screen.  
activate the rename feature.  
How to Add a Channel to a Favourites List  
Now pressing “ ” or “ ” button moves to the previous/  
next character. Pressing “ ” or “ ” button toggles  
the current character, i.e., ‘b’ character becomes ‘a’  
by “ ” and ‘c’ by “ ”. Pressing the numeric buttons  
‘0...9’ replaces the highlighted character with the  
characters printed above the button one by one as  
the button is pressed.  
• By pressing “ ” or “ ” buttons, highlight the channel  
that you want to add to the favourite list.  
• By pressing OK button, the highlighted channel is  
added to the Favourite List.  
• F icon indicates that a channel is added to Favourite  
List.  
Removing a Channel from Favourite List  
Press the “M” button to cancel the editing or OK button  
to save the new name.  
• Highlight the channel that you want to remove from  
the favourite list and press OK button to remove.You  
can press OK button again to re-add a channel.  
Adding Locks to Channels  
Channel locking provides a password-protected  
access to channels selected by parents. In order to  
lock a channel you should know the parental lock  
password (default value is set to 0000 in the factory  
and can only be changed from the Conguration  
menu).  
To activate Favourites, go to the Conguration menu  
and select Favourite mode. Use “ ” / “ ” to set  
Favourite mode as on. To cancel Favourites, set  
Favourite Mode to Off.  
On Screen Help  
For all menus, press the INFO/  
the help information about the menu functions.  
button to display  
Select the channel to be locked by highlighting it and  
select the Lock option by pressing “ ” or “ ” button.  
When the OK button is pressed, a dialog OSD asking  
for the password will be displayed.  
Program Guide  
This section is same with the instructions given in  
the General Operations page. Please see Electronic  
Programme Guide (EPG) section in the General  
Operations part.  
Timers  
Enter the password by using the numeric buttons on  
the remote control. The lock icon “ ” will now be  
displayed next to the selected channel. Repeat the  
same operation to cancel the lock.  
To display timers window, activate the item from the  
main menu. To add a timer, press the YELLOW button  
English - 15 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 1155  
17.02.2010 14:17:14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
on the remote control. Then “Add Timer” window • Some CAMs may require the following set up. Please  
appears.  
set the CAM by entering the IDTV menu, Conditional  
Access then pressing the OK button. (CAM set up  
menu is not displayed when it is not required.)  
Channel: “ ” or “ ” keys will navigate the user  
through the TV or Radio list.  
To see the viewing contract information: enter IDTV;  
press the “M” button, then highlight Conditional  
Access and press the OK button.  
Date: Starting date is entered via the Left/Right or the  
numeric buttons.  
Start: Starting time is entered via the Left/Right or  
the numeric buttons.  
• When no module is inserted, “No Conditional  
Access module detected” message appears on  
the screen.  
End: Ending time is entered via the Left/Right or the  
numeric buttons.  
• Refer to the module instruction manual for details  
of the settings.  
Duration: Duration between Start and End time.  
Repeat: You can set a timer to be repeated as Once,  
Daily or Weekly.  
NOTE: Insert or remove the CI module only when the  
TV is in STAND-BY mode or SWITCHED OFF.  
Change/Delete: permits or prohibits any modications  
for other users.  
TV Setup  
You can use this item to display the TV functions.  
You can save the adjustments by pressing the GREEN  
key or cancel the process by pressing the RED button.  
You can edit the list via GREEN key and delete with  
the RED button.  
The digital TV Setup menu screen is accessed from  
the main menu. Press the “M” button to display the  
main menu and use “ ” or “ ” button to highlight  
“TV Setup”, press the OK button to display TV Setup  
menu screen.  
Conditional Access  
• Press the M button to display the main menu and use  
the “ ” or “ ” button to highlight the “Conditional  
Access” line and press the OK button:  
Some Digital Terrestrial channels operate on a Pay You can nd detailed information for all menu items  
Per View basis. These require a subscription and a in “Analogue TV Menu System” section.  
hardware decoder.  
Setup  
Obtain the Conditional Access Module (CAM) and  
The adjustments in this menu are given as the  
the viewing card by subscribing to a pay channel  
following:  
company, then insert those to the TV using the  
following procedure.  
• Switch off the TV and unplug from the mains.  
• Insert the CAM and then the viewing card to the slot  
that is located in the terminal cover at the left-hand  
side of the TV (from front view).  
• The CAM should be correctly inserted, it is impossible  
to insert fully if reversed. The CAM or the TV terminal  
may be damaged if the CAM is forcefully inserted.  
Conguration  
You can congure the settings of your TV. Select  
Conguration from Setup menu and press OK to view  
this menu. Press the RETURN button on the remote  
control to exit.  
• Connect the TV to the mains supply, switch on  
and then wait for few moments until the card is  
activated.  
English - 16 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 1166  
17.02.2010 14:17:15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
channels as well. If it is set as OFF manually, encrypted  
channels will not be located while in automatic search  
or manual search.  
Use “ ” or “ ” button to select Scan Encrypted and  
then press “ ” or “ ” button to set this setting as  
On or Off.  
Receiver Upgrade  
Over Air Download (OAD)  
To ensure that your TV always has the most update  
information, use this setting. Please ensure that the TV  
is set to standby mode. The TV automatically powers  
up at 3.00 A.M. each day and searches for any new  
information which may be broadcast and will download  
this to your receiver automatically. This operation will  
normally take approximately 30 minutes. If you have  
an important recording to be carried out at 3.00 A.M.  
and you do not want to interrupt it, disable auto OAD  
search by performing the following:  
Dolby D Digital (* for EU countries only)  
(optional)  
In the Conguration Menu, highlight the Dolby D  
item by pressing “ ” or “ ” buttons. Use the “ ” or  
” buttons to set the Dolby D Digital as On or Off.  
If the channel that you are watching supports Dolby  
Digital,you can turn this setting on.  
Hard of Hearing (* for EU countries only)  
Use “ ” or “ ” button to select Hard of Hearing and  
then press “ ” or “ ” button to set this setting as  
On or Off.  
If the broadcaster enables any special signal  
concerning the audio, you can set this setting as On  
to receive such signals.  
Favourite Mode  
• Press “M” button and using the “ ” or “ ” buttons  
to choose Setup and press the OK button.  
Use this function to enable or disable favourite  
mode. Press “ ” / “ ” button to set this function as  
on or off.  
• Highlight Conguration menu with “ ” or “ ” keys  
and press OK.  
Channel List  
• Use “ ” or “ ” buttons to choose “RECEIVER  
Use “ ” or “ ” buttons to go to Channel List option.  
Use “ ” or “ ” buttons to toggle Channel List Mode.  
If you select “TV Only”, with the “ ” or “ ” buttons,  
you navigate through only TV channels. If you select  
“Radio Only”, with the “ ” or “ ” buttons, you navigate  
through only radio channels. If you select “Text Only”,  
with the “ ” or “ ” buttons, you navigate through only  
text channels. To save the recent changes and exit;  
press the “M” button.  
UPGRADE” and press OK button.  
• Using the“ ” or “ ” button change “Automatic  
scanning” from Enabled to Disabled.  
Highlight “Scan for upgrade” menu with  
Active Antenna  
” or “ ” keys and pres OK to commence  
upgrade.  
Use “ ” or “ ” buttons to highlight Active Antenna  
option.  
After the search progress is completed, the message  
“ Completed searching for upgrade. No new software  
was found” appears on the screen if no new software  
is found.  
When antenna power option is set as On by pressing  
” or “ ” button, +5V will be transmitted to the  
antenna output.  
• Do not forget to re enable the automatic OAD  
function after you have made your recording by  
repeating the above instructions but this time  
selecting ENABLE.  
This feature enables the use of active antenna.  
Note: Antenna power should be “Off” when standard  
antenna is used instead of the active antenna.  
Scan Encrypted (**)  
Note: Your TV may start in First Time Installation mode  
after OAD update.  
(**) For UK only.  
Scan Encrypted Channel feature will always be ON  
after performing rst time installation. When this  
setting is on, search process will locate the encrypted  
English - 17 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 1177  
17.02.2010 14:17:15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parental Control  
screen. Current Time,Time Zone Setting and Time  
Zone will be available.  
Use “ ” or “ ” buttons to go to Parental Lock option.  
Press OK button to enter the menu. A dialog box Use “ ” or “ ” buttons to highlight the Time Zone  
asking for the lock key will be displayed. The key is set Setting. Time Zone Setting is set using “ ” or “  
to “0000” initially. Enter PIN. If it is incorrect, “Wrong buttons. It can be set to AUTO or MANUAL. When  
Pin” OSD will be displayed. If it is correct, the Parental AUTO is selected, Current Time and Time Zone  
Control menu will be displayed:  
options will not be available to be set. If MANUAL  
option is selected as the Time Zone Setting, Time  
Zone can be altered:  
• By pressing “ ” or “ ” buttons select Time Zone.  
Use “ ” or “ ” buttons to change the Time Zone  
between GMT-12 or GMT+12. Current Time on the  
top of the menu list will then change according to  
the selected Time Zone.  
Maturity Lock (**)  
Audio Description (Optional)  
(**) If you set Country option as UK in the rst time  
installation, Maturity Lock option will not be visible.  
Audio description refers to an additional narration  
track for blind and visually impaired viewers of visual  
media. You can use this feature, only if the broadcaster  
supports that additional narration track. Use “ ” or  
When set, this option gets the maturity information  
from the broadcast and if this maturity level is disabled,  
does not show video-audio.  
” buttons to select an item. Then use “ ” or “  
Menu Lock  
buttons to set.  
In menu lock you can set locking for all menus, or the  
Installation Menu to restrict access to these menus.  
If the menu lock is disabled, there will be free access  
to the menu system. Use “ ” or “ ” buttons to go to  
Menu Lock option. Use “ ” or “ ” buttons to choose  
Menu Lock Mode.  
DISABLED : All menus are unlocked.  
Audio Description (Optional)  
ALL MENUS : All Menus are accessible only with  
the correct lock key. So the user cannot add, delete,  
rename, channels, cannot set timers.  
This function enables or disables the audio description  
feature by pressing the “ ” or “ ” buttons.  
Preferred Language (Optional)  
INSTALLATION MENU: Installation menu is locked.  
So the user can’t add channels. Changes will be  
updated after exiting ‘Conguration Menu’.  
By pressing the “ ” or “ ” buttons the preferred audio  
description language is being changed.  
This setting can be used, only if it is available.  
Set PIN  
Relative Volume (Optional)  
Use “ ” or “ ” buttons to go to “Set PIN” option. Press  
OK to display the “Set PIN” window. Use numeric  
buttons to enter new pin number you will need to  
input your new pin a second time for verication  
purposes. The factory default pin number is 0000,  
if you change the pin number make sure you write it  
down and keep it safe.  
Using this option, the Audio Description volume level  
can be increased or decrased relatively, according to  
the general volume.  
Standby Search (*) (Optional)  
(*) This setting is visible only when the Country option  
is set to Denmark, Sweden, Norway or Finland.  
Use “ ” or “ ” button to select Standby Search and  
then press “ ” or “ ” button to set this setting as On or  
Off. If you change Standby Search to Off, this function  
will be unavailable.  
To use Standby search please make sure that  
you select Standby Search as On.  
Language  
Time Settings (**) (Optional)  
(**) If you set Country option as UK in the rst time  
installation, Time Settings option will not be visible.  
In the conguration menu, highlight the Time Settings  
item by pressing “ ” or “ ” buttons. Press OK and  
Time Settings sub menu will be displayed on the  
In this menu the user can adjust the preferred  
language. Language is changed by pressing OK  
button.  
English - 18 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 1188  
17.02.2010 14:17:16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
In the conguration menu, highlight the Language  
Settings item by pressing “ ” or “ ” buttons. Press  
OK and Language Settings submenu will be displayed  
on the screen:  
Use “ ” or “ ” buttons to highlight the menu item  
that will be adjusted and then press “ ” or “ ” button  
to set.  
Notes:  
• System Language determines the on-screen menu  
language.  
Audio Language is used for selecting the soundtrack  
of a channels.  
• Primary settings are the rst priority when multiple  
choices are available on a broadcast. Secondary  
settings are the alternatives when the rst options  
are not available.  
Menu: shows the language of the system  
Preferred  
Installation  
These settings will be used if available. Otherwise the  
current settings will be used.  
The Installation menu is mainly intended to help you  
for creating a Channel Table in the most efcient way.  
Select Installation from the Conguration menu by  
pressing “ ” or “ ” buttons.  
Audio: by pressing “ ” or “ ” keys change the  
audio language.  
Subtitle: alter the subtitle language with “ ” or “  
” keys. The chosen language will be seen in  
subtitles.  
Movie Subtitle (optional)  
• In order to display subtitles properly, use this setting  
to select a movie subtitle language.  
• By pressing “ ” or “ ” button, select the desired  
language option.  
Automatic Channel Scan  
Automatic channel scan is started by pressing  
OK button while Automatic channel scan item is  
highlighted.  
Guide: By pressing “ ” or “ ” buttons change the  
guide language.  
Current  
The following message appears on the screen:  
Audio: if audio language is supported change the  
audio language by pressing “ ” or “ ” buttons  
Subtitle: if subtitle is backed up, alter the subtitle  
language with “ ” or “ ” buttons. The chosen  
language will be seen in subtitles.  
Highlight Yes or No by using “ ” or “ ” buttons and  
press OK button to conrm.  
Note: If the Country option is set to Denmark, Sweden,  
Norway or Finland, the Language Settings menu will  
function as described below:  
If Yes is selected, automatic search starts.  
Selecting No cancels automatic search.  
Language Settings  
After search is completed for digital channels, a  
message asking whether to search for analogue  
channels appears on the screen:  
Press the OK button to search for analogue channels.  
The following menu appears on the screen for  
analogue channel search:  
English - 19 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 1199  
17.02.2010 14:17:17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
First Time Installation  
The user can use this item to load default settings,  
which were loaded to the receiver at the factory.  
To install factory settings, highlight “First Time  
Installation” menu item and press OK button, then  
you will be asked whether or not to delete the settings.  
Selecting “Yes” by pressing OK button while the “Yes”  
is highlighted will delete the existing channel table.  
Then you will be asked to conrm for deleting all  
channels and settings:  
Select your Country, Language and Text language  
by using “ ” or “ ” and “ ” or “ ” buttons. Press  
OK or RED button to continue. To cancel, press BLUE  
button. The following menu will be displayed during  
the automatic tuning:  
By selecting Yes and pressing the OK button, the  
existing channel table will be deleted.  
After factory settings are loaded, “First Time  
Installation” menu will be displayed.  
The menu which is displayed for language selection  
appears on the screen at rst. By using “ ” or “  
buttons, select the desired language option, and press  
OK button to activate.  
AfterAPS is nalized, the programme table will appear  
on the screen. In the programme table you will see  
the programme numbers and names assigned to the  
programmes.  
After then, “First time installation” OSD will appear on  
the screen. By pressing “ ” or “ ” buttons, select the  
Country you want to set and press OK button (* only  
for EU countries).  
If you do not accept the locations and/or the  
programme names, you can change them via the  
program table.  
- Next, active antenna mode selection OSD will appear  
on the screen.Use “ ” or “ ” to set and press OK  
to continue.See the section, “Initial Settings” for  
more information.  
Manual Channel Scan  
After active antenna mode option is selected, a  
message asking for automatic search appears on  
the screen:  
In manual channel scan, the number of the multiplex is  
entered manually and only that multiplex is searched  
for the channels. For every valid channel number,  
signal level and signal quality are shown on the  
screen.  
In both manual and auto search any existing channel  
in the database is not re-stored to avoid redundant  
duplicates of that channel.  
Press the OK button to start installation. After search  
is completed for digital channels, a message asking  
whether to search for analogue channels appears  
on the screen: This process is same as described in  
Automatic Search section.  
Clear Service List (*)  
(*) This setting is visible only when the Country option  
is set to Denmark, Sweden, Norway or Finland.  
Use this setting to clear channels stored. Press “ ” or  
” button to select Clear Service List and then press  
OK. The following OSD message will be displayed  
on the screen:  
Press OK to cancel. Select Yes by pressing “ ” or “  
button and press OK to delete all of the channels.  
English - 20 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 2200  
17.02.2010 14:17:18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press “ ” or “ ” button to select Film Mode.  
Press “ ” or “ ” button to set this feature On or Off.  
Turn this feature on when you are watching.  
lms to see the fast motion scenes clearly.  
Analogue TV Menu System  
Picture Menu  
Game Mode  
Select Game Mode by pressing “ ” or “ ” button.  
Use “ ” or “ ” button to set Game Mode as On or  
Off. When Game Mode is set to On, specic game  
mode settings, which are optimized for better video  
quality, will be loaded.  
Also; Picture Mode, Contrast, Brightness, Sharpness,  
Colour and Colour Temp settings will be invisible and  
disabled while Game Mode is on.  
Note:  
Picture mode selection button on the remote control  
will have no function while Game Mode is on.  
If the TV is switched to PIP/PAP mode, Game Mode  
setting will be disabled and be removed from the  
Picture menu.  
Mode  
For your viewing requirements, you can set the related  
mode option.  
Picture Zoom  
Select Picture Zoom by pressing “ ” or “  
button.  
Press “ ” or “ ” button to select Mode. Press  
” or “ ” button to choose from one of these options:  
Cinema, Dynamic and Natural.  
Use “ ” or “ ” buttons, to change picture zoom to  
Auto, 16:9, 4:3, Panoramic, 14:9, Cinema, Subtitle  
or Zoom.  
Brightness/Contrast/Colour/Sharpness/  
Hue  
Reset  
Press “ ” or “ ” button to select the desired option.  
Press “ ” or “ ” button to set the level.  
Press “ ” or “ ” button to select Reset. Press  
” or “ ” or OK button to reset the picture modes to  
Note: Hue option can only be visible when the TV  
receives an NTSC signal.  
factory default settings.  
Store  
Colour Temp  
Press “ ” or “ ” button to select Store. Press “  
or OK button to store the settings. “Stored...” will be  
displayed on the screen.  
Press “ ” or “ ” button to select Colour Temp. Press  
” or “ ” to choose from one of these options: Cool,  
Normal and Warm.  
Sound Menu  
Note:  
• Setting Cool option gives white colours a slight  
blue stress.  
• Setting Warm option gives white colours a slight  
red stress.  
• For normal colours, select Normal option.  
Noise Reduction  
If the broadcast signal is weak and the picture is  
noisy, use Noise Reduction setting to reduce the  
noise amount.  
Press “ ” or “ ” button to select Noise Reduction.  
Press “ ” or “ ” to choose from one of these options:  
Low, Medium, High or Off.  
Film Mode  
Films are recorded at a different number of frames per  
second to normal television programmes.  
English - 21 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 2211  
17.02.2010 14:17:18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PIP/PAP : PIP/PAP window sound.  
Active : Sound of the current selection.  
Volume  
Press “ ” or “ ” button to select Volume. Press “  
or “ ” button to change the level of the Volume.  
Inactive : Sound of the currently inactive window.  
Sound Mode (optional)  
Equalizer  
Press “ ” or “ ” button to select Equalizer. Press  
” button to view equalizer menu.  
Press “ ” or “ ” button to select Sound Mode. Using  
” or “ ” button, you can select Mono, Stereo, Dual I  
or Dual II mode, only if the selected channel supports  
that mode.  
AVL  
Automatic Volume Limiting (AVL) function adjusts the  
sound to obtain xed output level between programmes  
(For instance, volume level of advertisements tend to  
be louder than programmes).  
Press “ ” or “ ” button to select AVL. Press “ ” or  
” button to set the AVL as On or Off.  
Spdif Out  
Press “ ” or “ ” button to select Spdif Out.  
Press “ ” or “ ” button to set the Spdif Out. as  
On or Off.  
Note: If Spdif Out is set to On, headphone will be  
disabled.  
Press “ ” or “ ” button to change the preset. In  
equalizer menu, the preset can be changed to Music,  
Movie, Speech, Flat, Classic and User.  
Store  
Select the desired frequency by pressing “ ” or “  
button and increase or decrease the frequency gain  
by pressing “ ” or “ ” button.  
Press “ ” or “ ” button to select Store. Press  
” or OK button to store the settings. “Stored...” will  
be displayed on the screen.  
Press the “M” button to return to the previous menu.  
Feature Menu  
Note: Equalizer menu settings can be changed only  
when the Equalizer Mode is in User.  
Balance  
This setting is used for emphasizing left or right  
speaker balance.  
Press “ ” or “ ” button to select Balance. Press “  
” or “ ” button to change the level of the balance.  
Balance level can be adjusted between -32 and +  
32.  
Headphone  
Press “ ” or “ ” button to select Headphone. Press  
” button to view the headphone menu.  
Headphone sub-menu options are described below:  
Volume  
Press “ ” or “ ” button to select Volume. Press  
Pip-Pap  
” button to increase headphone volume level. Press  
” button to decrease headphone volume level.  
In the Feature menu, highlight PIP item by pressing  
” or “ ” buttons. Press “ ” button to enter PIP  
Headphone volume level can be adjusted between  
0 and 63.  
submenu:  
Headphone Sound (optional)  
Press “ ” or “ ” button to select Headphone Sound.  
Using “ ” or “ ” button, you can select Main, PIP/PAP,  
Active or Inactive.  
Main  
: Main window sound.  
English - 22 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 2222  
17.02.2010 14:17:19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note: See Appendix E for all PIP/PAP modes.  
Sleep Timer  
Press “ ” or “ ” button to select Sleep Timer. Use  
” or “ ” button to set the Sleep Timer.  
The timer can be programmed between Off and 120  
minutes in steps of 10 minutes.  
If Sleep Timer is activated, at the end of the selected  
time, the TV goes automatically to standby mode.  
Child Lock  
Press “ ” or “ ” button to select Child Lock.  
Use “ ” or “ ” button to set the Child Lock On or Off.  
When On is selected, the TV can only be controlled  
by the remote control handset. In this case the control  
panel buttons (except for the STANDBY button) will  
not work.  
Using “ ” or “ ” button, you can switch to PIP, PAP  
mode or turn off the feature.  
Hence, if one of those buttons is pressed, Child Lock  
On will be displayed on the screen when the menu  
screen is not visible.  
If the TV is switched to PIP or PAP mode, Pip-Pap  
submenu will change accordingly and the following  
settings will appear on the same menu screen.  
Language  
Note that if you switch to PAP mode by using Pip-Pap  
setting, only Source and Swap options will be active  
among the menu settings.  
Press “ ” or “ ” button to select Language. Use  
” or “ ” button to select the Language.  
Default Zoom  
Pip-Pap  
While zoom mode is set as AUTO, the TV will set  
the zoom mode in accordance with the signal of  
the broadcast. If there is no WSS or aspect ratio  
information, the TV will then use this setting to  
This line controls Pip/Pap modes. Use “ ” or “  
buttons to switch the TV to Pip, Pap or Off.  
Pip Size  
Using this setting, you can set the size of the Pip adopt. Press “ ” or “ ” button to select Default  
window. Press “ ” or “ ” button to highlight Pip Zoom. You can set Default Zoom to Panoramic,  
Size item. Use “ ” or “ ” button to set Pip Size to 16:9, 4:3 or 14:9 by pressing “ ” or “ ” button.  
Small or Large.  
Blue Background  
Note: This setting will be inactive if the TV is set to  
Pap mode.  
If the signal is weak or absent, the TV will automatically  
change to a blue screen. To enable this, set Blue  
Background to On.  
PIP Position  
This setting is used for moving the sub picture.  
Select PIP Position item by using “ ” or  
By pressing “ ” or “ ” button, select Blue  
Background. Press “ ” or “ ” button to set Blue  
Background as On or Off.  
” button. Use “ ” or “ ” button to adjust PIP  
position.  
Menu Background  
Positions available are: Bottom Right,Bottom Left, Top  
Left and Top Right.  
Press “ ” or “ ” button to select Menu Background.  
You can set menu background level by pressing  
” or “ ” button.  
Source  
PIP Source setting enables you to select the source  
of the sub picture.  
Backlight  
This setting controls the backlight level. Select  
Backlight by pressing “ ” or “ ” button.  
Press“ ” or “ ” button to set Backlight to Auto,  
Medium, Maximum or Minimum.  
Select PIP Source item by using “ ” or “  
button. Use “ ” or “ ” button to set PIP source.  
Program  
Menu Timeout  
This setting will be unavailable to be used.  
To set a specic display timeout for menu screens,  
Swap  
set a value for this option.  
Select Swap item by using “ ” or “ ” button. Use “  
” or “ ” button to set. This function enables to swap  
between the main and the PIP picture.  
English - 23 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 2233  
17.02.2010 14:17:20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press “ ” or “ ” button to select Menu Timeout. Use Band  
” or “ ” button to change menu timeout to 15 sec,  
Band can be selected either C or S. Press “ ” or  
” button to set Band.  
30 sec or 60 sec.  
Teletext Language  
Channel  
Press “ ” or “ ” button to select Teletext Language.  
Use “ ” or “ ” button to change Teletext Language to  
West, East, Turk/Gre, Cyrillic, Arabic or Persian.  
Channel can be changed by “ ” or “ ” button or  
numeric buttons.  
Colour System  
Ext Out  
Press “ ” or “ ” button to select Colour System. Use  
Press “ ” or “ ” button to select Ext Out. Use “ ” or  
” or “ ” button to change the colour system to PAL,  
” button to set the Ext Out as On or Off.  
PAL 60, SECAM or AUTO.  
Note:  
Sound System  
For copying from a DVD or VCR device, you should  
choose desired source from source menu and turn  
“On” to EXT Out from feature menu.  
Press “ ” or “ ” button to select Sound System.  
Press “ ” or “ ” button to change the sound system  
to BG,DK, I, L or L’.  
HDMI PC Full Mode (optional)  
Fine Tune  
If you want to view PC screen in HDMI mode by using  
external connection, HDMI PC FULL MODE option  
should be On to adjust the screen ratio correctly. This  
item might be inactive in some resolutions.  
Press “ ” or “ ” button to select Fine Tune. Press “  
” or “ ” button to adjust the tuning.  
Search  
Press “ ” or “ ” button to select Search. Use “  
Note: If you connect an HDMI device and switch the  
TV to HDMI mode, this feature will be visible (except  
for 1080i/1080P resolution).  
or “ ” button to start programme searching. You can  
also enter the desired frequency using the numeric  
buttons while Search item is highlighted.  
Full Mode (optional)  
Store  
If you connect a device via HDMI or YPbPr connectors  
and set 1080i/1080P resolutions, Full Mode item will  
be visible.You can set Full Mode as 1:1 or Normal  
by using “ ” or “ ”.If you select 1:1, screen ratio will  
be adjusted correctly. If you set Normal, screen ratio  
may expand.  
Press “ ” or “ ” button to select Store. Press “  
or OK button to store the settings. “Stored...” will be  
displayed on the screen.  
Install Menu in AV Modes  
The following screen appears in the install menu when  
the TV is in AV modes. Note that limited options will  
be available. Switch to TV mode for viewing complete  
version of the Install menu.  
Install Menu  
Program  
Press “ ” or “ ” button to select Program. Use “  
or “ ” button to select the program number. You can  
also enter a number using the numeric buttons on the  
remote control. There are 200 programme storage  
between 0 and 199.  
Colour System  
Press “ ” or “ ” button to select Colour System. Use  
” or “ ” button to change the colour system to PAL,  
SECAM, PAL60, AUTO, NTSC 4,43 or NTSC 3,58.  
English - 24 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 2244  
17.02.2010 14:17:21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Store  
Press “ ” or “ ” button to select Store Program.  
Press “ ” or OK button to store the settings.  
Stored...” will be displayed on the screen.  
Program Table  
Select Program Table by pressing “ ” or “  
button.  
Country  
Press “ ” or “ ” button to select your country. If you  
want to exit from A.P.S. function, press the BLUE  
button.  
When you press OK or RED button for starting  
automatic tuning, all stored programmes will be erased  
and the TV will search for available channels. During  
the search, the following OSD will be displayed:  
By moving the cursor in four directions you can reach  
20 programmes in the same page. You can scroll the  
pages up or down by pressing the navigation buttons  
to see all the programmes in TV mode (except for the  
AV modes). By cursor action, programme selection is  
done automatically.  
Whenever you press the BLUE button, APS function  
Name  
stops and Program Table appears on the screen.  
To change the name of a programme, select the  
If you wait until the end of APS, Program Table will be  
displayed with the programmes found and located.  
programme and press the RED button.  
The rst letter of the selected name will be highlighted.  
Press “ ” or “ ” button to change that letter and “  
or “ ” button to select the other letters. By pressing  
the RED button, you can store the name.  
Move  
Select the programme which you want to insert by  
navigation buttons. Press the GREEN button. By  
navigation buttons move the selected programme to  
the decided programme space and press the GREEN  
button again.  
Delete  
To delete a programme, press the YELLOW button.  
Pressing the YELLOW button again erases the  
selected programme from the programme list, and  
the following programmes shift one line up.  
APS (Auto Programming System)  
When you press the BLUE button for starting  
automatic tuning, Auto Programming System menu  
will appear on the screen:  
English - 25 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 2255  
17.02.2010 14:17:22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Select Autoposition item by using “ ” or “ ” buttons.  
Press OK or “ ”, “ ” button.  
Source Menu  
Press “ ” or “ ” button and select the sixth icon.  
Then press “ ” or OK button. Source menu appears  
on the screen:  
Warning: Please ensure auto adjustment is performed  
with a full screen image to ensure best results.  
H (Horizontal) Position  
This item shifts the image horizontally to right hand  
side or left hand side of the screen.  
Select H Position item by using “ ” or “ ” button. Use  
” or “ ” button to adjust the value.  
V (Vertical) Position  
This item shifts the image vertically towards the top  
or bottom of the screen.  
Select V Position item by using “ ” or “  
button. Use “ ” or “ ” button to adjust  
the value.  
Phase  
In source menu, highlight a source by pressing “  
or “ ” button and switch to that mode by pressing “  
” button. Source options are; TV, DTV, EXT-1, EXT-2,  
Depending on the resolution and scan frequency that  
you input to the TV set, you may see a hazy or noisy  
picture on the screen. In such a case you can use this  
item to get a clear picture by trial and error method.  
FAV, HDMI-1, HDMI-2, YPbPr or PC-VGA.  
Note: Once you have connected optional equipment  
systems to your TV, you should select the required  
input to view pictures from that source.  
Select Phase item by using “ ” or “ ” buttons. Use  
” or “ ” button to adjust the value.  
Dot Clock  
PC Mode Menu System  
Dot Clock adjustments correct the interference  
See “Connecting the LCD TV to a PC” section for that appear as vertical banding in dot intensive  
connecting a PC to the TV set.  
presentations like spreadsheets or paragraphs or  
text in smaller fonts.  
For switching to PC source, press “SOURCE” button  
on your remote control and select PC input. You can Select Dot Clock item by using “ ” or “ ” buttons. Use  
also use “Source” menu to switch to PC mode.  
” or “ ” button to adjust the value.  
Note that PC mode menu settings are available only  
while the TV is in PC source.  
PC Picture Menu  
For adjusting PC picture items, do the following:  
PC Position Menu  
Press “ ” or “ ” button to select the second icon. PC  
Select the first icon by pressing “ ” or Picture menu appears on the screen.  
” button. PC Position menu appears on the screen:  
Brightness, Contrast, Colour and Colour  
Temperature settings in this menu are identical to  
settings dened in TV picture menu under “Analogue  
TV Menu System”.  
Note: If you set Colour Temp as User, you can dene  
R, G, B settings manually.  
Sound, Feature and Source settings are identical  
to the settings explained in Analog TV menu  
system.  
Autoposition  
If you shift the picture horizontally or vertically to an  
unwanted position, use this item to put the picture  
into correct place automatically. This setting therefore  
automatically optimizes the display.  
English - 26 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 2266  
17.02.2010 14:17:22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Displaying TV Information  
Zoom Modes  
Programme Number, Programme Name, Sound You can change the aspect ratio (image size) of the TV  
Indicator and Zoom Mode information is displayed  
on the screen when a new programme is entered or  
for viewing the picture in different zoom modes.  
Press “SCREEN” button to directly change the zoom  
mode.  
INFO/  
” button is pressed.  
Mute Function  
Available zoom modes are listed below.  
Press “ ” button to disable sound. Mute indicator will Note:  
be displayed in the upper side of the screen.  
In YPbPr and HDMI modes, while in 720p-1080i  
To cancel mute, there are two alternatives; the rst resolutions, only 16:9 mode is available.  
one is pressing the “ ” button and the second one  
is increasing the volume level.  
In PC mode, only 16:9 mode is available.  
Auto  
PIP (Picture-in-Picture) and PAP  
When a WSS (Wide Screen Signalling) signal, which  
shows the aspect ratio of the picture, is included in  
the broadcast signal or the signal from an external  
device, the TV automatically changes the ZOOM  
mode according to the WSS signal.  
(Picture-and-Picture) Modes  
Press the “  
/
” button once to switch to PIP  
mode.  
At PIP Mode, a small picture (PIP picture) is displayed  
on the main picture. There are 1 size and 4 positions  
(upper left, upper right, bottom left and bottom right)  
available for the PIP window.  
• When the AUTO mode does not function correctly  
due to poor WSS signal quality or when you want to  
change the ZOOM mode, change to another ZOOM  
mode manually.  
When PIP Mode is entered, the default active window  
is the PIP window and the active window is indicated  
by a yellow frame around it. The active window can  
be changed by pressing “ ” or “ ” button. The  
status info OSD belongs to active window. The place  
of the status OSDs are same for both windows.  
16:9  
This uniformly stretches the left and right sides of a  
normal picture (4:3 aspect ratio) to ll the wide TV  
screen.  
Press the “  
mode.  
/
” button again to activate PAP  
At PAP Mode, two pictures with equal sizes are  
displayed on the screen.Aspect Ratios of the windows  
are xed.  
• For 16:9 aspect ratio pictures that have been  
squeezed into a normal picture (4:3 aspect ratio),  
use the 16:9 mode to restore the picture to its  
original shape.  
When you switch to PAP Mode, main window in PAP  
Mode will be displayed on the right side of the screen.  
The active window can be changed by pressing “  
” or “ ” button.  
4:3  
Use to view a normal picture (4:3 aspect ratio) as this  
is its original size.  
Press the “  
mode.  
/
” button again to exit the PAP  
Picture Mode Selection  
By pressing PRESET button, you can change Picture  
Mode settings in accordance with your viewing  
requirements.Available options are Dynamic, Natural  
and Cinema.  
Panoramic  
This stretches the left and right sides of a normal  
picture (4:3 aspect ratio) to ll the screen, without  
making the picture appear unnatural.  
Freezing Picture  
You can freeze the picture on the screen by pressing  
the “OK” button on the remote control. Press the  
OK” button to freeze picture. Press again to quit  
freeze mode.  
Note: This feature is available for analogue TV mode  
only.  
The top and bottom of the picture are slightly cut off.  
English - 27 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 2277  
17.02.2010 14:17:23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Press once to enlarge top half of the page, press again  
to enlarge the bottom half of the page. Press again to  
revert back to normal size.  
14:9  
This zooms up the wide picture (14:9 aspect ratio) to the  
upper and lower limits of the screen.  
” Reveal  
Shows hidden information (e.g. solutions of games).  
“OK” Hold  
Holds a text page when convenient. Press again to  
resume.  
Cinema  
Subcode Pages  
This zooms up the wide picture (16:9 aspect ratio) to  
the full screen.  
Selects subcode pages if available when the teletext  
is activated.  
P+ / P- and numbers (0-9)  
Press to select a page.  
Note: Most TV stations use code 100 for their index  
pages.  
Subtitle  
Coloured Buttons  
This zooms up the wide picture (16:9 aspect ratio)  
with subtitles to the full screen.  
(RED/GREEN/YELLOW/BLUE)  
Your TV supports both FASTEXT and TOP text  
systems. When these systems are available, the  
pages are divided into groups or topics.  
When FASTEXT system is available, sections in a  
teletext page will become colour-coded and can be  
selected by pressing the coloured buttons. Press  
a coloured button that corresponds to with your  
needs.  
Zoom  
This option zooms to the picture.  
The coloured writings will appear, showing you which  
coloured buttons to use when TOP text transmission  
is present. Pressing “ ” or “ commands will  
request the next or previous page respectively.  
Note: You can shift to screen up or down by pressing  
” / “ ” buttons while picture zoom is selected as  
panaromic, 14:9, Cinema or Subtitle.  
Teletext  
Teletext system transmits information such as news,  
sports and weather on your TV. Note that is the signal  
degrades, for example in poor/adverse weather  
conditions, some text errors may occur or the teletext  
mode may be aborted.  
Teletext function buttons are listed below:  
” Teletext / Mix / PAT Mode  
Activates teletext mode when pressed once.  
Press again to place the teletext screen over the  
programme (mix). Pressing this button again will  
split the screen into two windows, one displaying the  
teletext and the other displaying the current channel.  
Pressing again will quit the teletext mode.  
“RETURN” Index  
Selects the teletext index page.  
“SCREEN” Expand  
English - 28 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 2288  
17.02.2010 14:17:23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
Tips  
Screen Care  
Your TV no longer responds to the remote control.  
Perhaps the batteries are exhausted. If so you can still  
use the local buttons at the bottom of the TV.  
Clean the screen with a slightly damp, soft cloth. Do  
not use abrasive solvents as they may damage the  
coating layer of the TV screen.  
Input Sources  
If you cannot select an input source, it is possible that  
no device is connected.  
For your safety, unplug the mains plug when cleaning  
the set. When moving the TV, hold it properly from  
the bottom part.  
Check theAV cables and connections if you have tried  
to connect a device.  
Image Persistence  
Please note that ghosting may occur while displaying  
a persistent image. LCD TVs’ image persistence may  
disappear after a short time. Try turning off the TV  
for a while.  
To avoid this, do not leave the screen in still picture  
for extended periods.  
No Power  
If your TV system has no power, please check the  
main power cable and connection to the mains  
socket outlet.  
Poor Picture  
Have you selected the correct TV system? Is your TV  
set or house aerial located too close to a non-earthed  
audio equipment or neon lights, etc.?  
Mountains or high buildings can cause double pictures  
or ghost images. Sometimes you can improve the  
picture quality by changing the direction of the  
aerial.  
Is the picture or teletext unrecognisable? Check if you  
have entered the correct frequency. Please retune  
the channels.  
The picture quality may degrade when two peripherals  
are connected to the TV at the same time. In such a  
case, disconnect one of the peripherals.  
No Picture  
Is the aerial connected properly? Are the plugs  
connected tightly to the aerial socket? Is the aerial  
cable damaged? Are suitable plugs used to connect  
the aerial? If you are in doubt, consult your dealer.  
No Picture means that your TV is not receiving a  
transmission. Have you selected the correct button  
on the remote control? Try once more.  
Also make sure the correct input source has been  
selected.  
Sound  
You can not hear any sound. Did you perhaps interrupt  
the sound, pressing the  
button?  
Sound is coming from only one of the speakers. Is the  
balance set to one extreme? See Sound Menu.  
English - 29 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 2299  
17.02.2010 14:17:23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix A: PC Input Typical  
Display Modes  
Appendix B: AV and HDMI Signal  
Compatibility (Input Signal Types)  
The display has a maximum resolution of 1920 x  
1200. The following table is an illustration of some of  
the typical video display modes.  
Source  
Supported Signals Available  
PAL 50/60  
NTSC 60  
RGB 50  
O
O
O
O
O
O
X
Your TV may not support different resolutions.  
Supported resolution modes are listed below.  
EXT-1  
(SCART  
1)  
If you switch your PC to an unsupported mode, a  
warning OSD will appear on the screen.  
RGB 60  
PAL 50/60  
NTSC 60  
RGB 50  
Note: Resolution modes indicated with (*) are not  
available for PIP/PAP modes.  
EXT-2  
(SCART-2)  
Resolution  
Frequency  
RGB 60  
X
Index  
Standard  
Hor  
Hor  
Ver  
Ver (Hz)  
PAL 50/60  
NTSC 60  
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
(KHz)  
37.9  
37.9  
31.5  
31.5  
35.0  
37.9  
37.5  
43.3  
35.2  
37.9  
43.8  
48.1  
46.9  
53.7  
49.7  
FAV  
1
2
640  
640  
640  
640  
640  
640  
640  
640  
800  
800  
800  
800  
800  
800  
832  
350  
400  
400  
480  
480  
480  
480  
480  
600  
600  
600  
600  
600  
600  
624  
85  
85  
70  
60  
66  
72  
75  
85  
56  
60  
70  
72  
75  
85  
75  
VESA  
VESA  
IBM VGA  
VESA  
MAC  
480I  
60Hz  
60Hz  
50Hz  
50Hz  
50Hz  
60Hz  
50Hz  
60Hz  
50Hz  
60Hz  
60Hz  
60Hz  
50Hz  
50Hz  
50Hz  
60Hz  
50Hz  
60Hz  
50Hz  
60Hz  
24 HZ  
3
4
480P  
576I  
5
6
VESA  
VESA  
VESA  
VESA  
VESA  
7
576P  
720P  
720P  
1080I  
1080I  
1080P  
1080P  
480I  
8
9
YPbPr  
10  
11  
12  
13  
14  
15  
VESA  
VESA  
VESA  
MAC  
VESA  
(interlace)  
16  
1024  
768  
43  
35.5  
17  
18*  
19*  
20*  
21*  
22  
1024  
1024  
1024  
1024  
1024  
1152  
1152  
1152  
1152  
1152  
1280  
1360  
1280  
1280  
1280  
1280  
1280  
1280  
1280  
1400  
1400  
1440  
1440  
1600  
1680  
1920  
768  
768  
60  
70  
72  
75  
85  
60  
70  
75  
85  
75  
60  
60  
75  
60  
75  
85  
60  
75  
85  
60  
75  
60  
75  
60  
60  
60  
48.4  
56.5  
57.7  
60.0  
68.3  
53.8  
64.2  
67.5  
77.1  
68.9  
47.7  
47.7  
60.2  
60.0  
75.0  
85.9  
64.0  
80.0  
91.1  
65.3  
82.3  
55.9  
70.6  
75.0  
65.3  
74.5  
VESA  
VESA  
480P  
576I  
768  
768  
576P  
720P  
720P  
1080I  
1080I  
1080P  
1080P  
1080P  
768  
864  
HDMI1  
HDMI2  
23*  
24*  
25*  
26*  
27  
864  
VESA  
VESA  
VESA  
MAC  
864  
864  
870  
768  
VESA  
28  
768  
29*  
30  
768  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
960  
31*  
32*  
33  
960  
960  
1024  
1024  
1024  
1050  
1050  
900  
(X: Not Available, O: Available)  
34*  
35*  
36  
Note: In some cases a signal on the LCD TV may  
not be displayed properly. The problem may be  
an inconsistency with standards from the source  
equipment (DVD, Set-top box, etc.). If you do  
expereince such a problem please contact your dealer  
and also the manufacturer of the source equipment.  
37*  
38  
39*  
40*  
41  
900  
1200  
1050  
1200  
VESA  
42*  
English - 30 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 3300  
17.02.2010 14:17:23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix C: Supported DVI Resolutions  
When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer  
to the following resolution information.  
24Hz  
25Hz  
30Hz  
50Hz  
60Hz  
480i  
480p  
576i  
;
;
;
;
;
;
;
576p  
720p  
1080i  
1080p  
;
;
;
;
;
;
Appendix D: PIP/PAP Mode Combinations  
PC-  
VGA  
MAIN  
TV  
DTV  
Scart1 Scart2  
FAV  
HDMI1 HDMI2 YPbPr  
9
8
TV  
8
8
8
8
8
9
9
9
9
9
8
9
9
9
9
9
8
9
9
9
9
9
9
9
8
9
9
9
9
9
9
9
9
8
(RGB)  
DTV  
9
9
9
9
9
9
Scart1  
Scart2  
FAV  
9
9
9
9
9
9
9
8
(RGB)  
(RGB) (RGB)  
9
8
8
8
8
8
8
(RGB)  
9
(RGB)  
HDMI1  
HDMI2  
YPbPr  
PC-VGA  
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
9
8
8
9
9
9
9
9
(RGB): This indicates that, selection is possible only if Scart-1 has a RGB signal.  
Restrictions: Scart-1 source must have RGB signal to perform PIP\PAP with sources TV, Scart-2, FAV.  
If these sources are set to main window, and Scart-1 does not have a RGB signal, Pip\Pap source can not  
be switched to the Scart-1 source.  
If scart-1 source is set to main window, and scart-1 does not have a RGB signal, Pip\Pap source can not be  
switched to TV, Scart-2 and FAV sources.  
Information for Users on Disposal of Old Equipment and  
Batteries  
[European Union only]  
These symbols indicate that equipment with these symbols should not  
be disposed of as general household waste. If you want to dispose  
of the product or battery, please consider the collection systems or  
facilities for appropriate recycling.  
Battery  
Notice: The sign Pb below the symbol for batteries indicates that  
this battery contains lead.  
Products  
English - 31 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 3311  
17.02.2010 14:17:23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specications  
TV BROADCASTING  
PAL/SECAM B/G D/K K’ I/I’ L/L’  
RECEIVING CHANNELS  
VHF (BAND I/III)  
UHF (BAND U)  
HYPERBAND  
MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Prole 1  
for UK  
Object carousel support compliant with ISO/IEC 135818-6 and UK DTT prole  
Frequency range: 474-850 MHz for UK models  
170-862 MHz for EU models  
Digital  
Reception  
Transmission standard: DVB-T. MPEG-2  
Demodulation: COFDM with 2K/8K FFT mode  
FEC: all DVB modes  
Video: MP@ML, PAL, 4:3/16:9  
Audio: MPEG Layer I&II 32/44.148kHz.  
NUMBER OF PRESET CHANNELS  
200  
CHANNEL INDICATOR  
On Screen Display  
RF AERIAL INPUT  
75 Ohm (unbalanced)  
OPERATING VOLTAGE  
220-240V AC, 50 Hz.  
AUDIO  
German + Nicam Stereo  
AUDIO OUTPUT POWER (WRMS.) (10% THD)  
2 x 8  
POWER CONSUMPTION (W)  
190 W (max)  
< 1 W (Standby)  
PANEL  
16:9 display, 40” Screen Size  
DIMENSIONS (mm)  
DxLxH (With foot):246 x 970 x 653  
Weight (Kg): 15,1  
DxLxH (Without foot): 99 x 970 x 613  
Weight (Kg):14,4  
English - 32 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 3322  
17.02.2010 14:17:24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important Instruction  
For your own safety read following instruction carefully before attempting to connect this unit to the mains  
supply.  
MAINS (AC) OPERATION  
The wires in the mains lead are coloured in accordance with the following code :  
GREEN  
&
FUSE  
YELLOW  
(Earth)  
(if there is earth cable)  
BROWN  
(Live)  
BLUE  
(Neutral)  
IMPORTANT  
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured  
markings identifying the terminals in your plug, proceed as follows:  
The wire which is coloured green and yellow must be connected to the terminal which is marked with  
the letter E, or by the earth symbol, or coloured green or green and yellow.  
The wire which is coloured blue or black must be connected to the terminal which is marked with the  
letter N or coloured Black.  
The wire which is coloured brown or red must be connected to the terminal which is marked with the  
letter L or coloured Red.  
For continued protection against risk of re, replace only with same type and rating of fuse (ASTA  
approved 5A 250VAC fuse).  
CAUTION  
TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFORE REMOVING  
COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
SAFETY PRECAUTION  
THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS WHEN NOT IN USE. DO NOT  
ALLOW THIS UNIT TO BE EXPOSED TO RAIN OR MOISTURE.  
English - 33 -  
[GB]_MB35_COST_40882W-1810UK_PANEUIDTV_BRONZE2_1006494466__5500116644771100....iinndddd 3333  
17.02.2010 14:17:24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Teac Musical Instrument Gf 680 User Manual
Telex TV Antenna ALP 450 User Manual
TP Link Network Router TL WPA2220 User Manual
Troy Bilt IP Phone GXP280 User Manual
Ultra Products Power Supply U1242368 User Manual
Velodyne Acoustics Speaker IA 400 User Manual
Vermont Casting Indoor Fireplace DVBR36RN User Manual
Viking Gas Grill VGBQ User Manual
Visioneer Fax Machine MFC7050C User Manual
VTech Laptop XL Series User Manual