Technicolor Thomson Universal Remote 28VT68ND User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

_ste_afl_ee_tyvi_ps_reio_can_uts_ioe_nt_s

SAFE USE OF THE EQUIPMENT

To ensure your personal safety and the efficient operation of your

equipment, please follow the advice given below :

1. TO TURN ON

Télévision sets need ventilation to avoid overheating which can cause

damage to the components. The ventilation slots at the back of the set

should not be covered up by curtains, small covers, newspapers, etc…

There must be enough room in built-in cabinets to allow for the cooling

air to circulate. The set should not be placed directly next to heating.

10 cm

5 cm

10 cm

This appliance is designed for use in dry areas. If occasionally you

should whish to operate it outdoors (for example, on the balcony or

veranda), you must insure that it is protected against all forms of

moisture (dew, rain, splashed water).

LEAVE ROOM FOR VENTILATION

A cold set may be switched on in a warm room only after any

condensation which may happen to be on the screen has evaporated.

Never remove the cabinet back. Have your aerial installed by an

authorised dealer or service technician.

In the evenings, after the TV programmes, or in case of a prolonged

absence, it is recommended that the appliance be switched off using

the main power switch. Even if the ON/OFF switch is in OFF position

the television set is not completely separated from the mains. In order

to separate it completely from the mains, it has to be disconnected by

unplugging the mains plug. Remove the power plug from the wall

outlet under the following conditions :

AVOID HEAT, WATER, DIRECT

SUNLIGHT.

1. During a thunderstorm. It is also recommended that you disconnect

the aerial plug.

2. If you find a burning smell or smoke emerging from the set.

Additional information :

Your TV set is adequately shielded to prevent emission of X-rays.

The acceleration voltage does not exceed the maximum value of 33 kV.

Do not place audio loudspeakers

near to television. The magnets

in the speakers could cause

patches of colour to appear

on the screen.

Work by non-qualified technicians, modification of the high voltage

setting or the replacement of the tube with a model that does not

comply with the manufacturer’s specifications may lead to a

considerable increase in X-ray radiation.

A set changed in any of the above ways no longer satisfies the initial

specifications and should not be put back into service.

2. CARE OF THE EQUIPMENT

The screen should be cleaned with liquid glass cleaner.

• Never use abrasive cleaners.

• To clean the front and the cabinet of your equipment use a soft cloth dipped in mild detergent. The use of

strong solvents such as white spirits or alcohol based products could damage your equipment.

• Clean the vents on the rear panel of your set regularly.

3. DEMAGNETISATION

The earth’s magnetic field may have an effect on your television by causing patches of colour to appear on the

screen. If this happens :

• Switch off the television with the on-off button ;

• Wait a few minutes and then press again to switch on.

This allows the screen to be demagnetised automatically. If patches of colour are still visible repeat the procedure.

The pages of this publication are printed on recycled paper.

Download from Www.Somanuals.com. All Manuals Search And Download.

remote control remote control

functions

Set-up - Preferences -

Browse - Clock - Lock -

Tuning - AV1 - AV2 - AV3.

using

PROGRAMME

When a red, green or yellow button is pressed for the first

time, the contents of the menu are displayed at the top of

the screen and the menu of the function selected is

displayed at the bottom of the screen.

Moving horizontally along in the menus

selects the required function on the

contents line if it has not been already

selected.

SOUND

Audio configuration - Balance - Loudspeakers -

Headphone - AV (Audiovisual).

- The selected function is displayed in the same colour as

the button pressed (red, green, yellow).

PICTURE

Picture - PIP - Format.

Press the coloured button repeatedly to move down

through the menus selecting different lines.

TELETEXT/TOPTEXT/FASTEXT

- The line selected in the menus is displayed in the same

colour as the button pressed (red, green, yellow).

PERSONAL ADJUSTMENTS

and scrolling back through the menus.

Make any adjustments.

Changes are saved when you quit the menus, except in

the PROGRAMME menu.

TO REMOVE THE MENU DISPLAY

or to display programme information, the type of sound

transmission (MONO, STEREO or DUAL),

the programme name and number, the time.

contents

CONNECTIONS AND COMMANDS

5/6

7/9

AUTO-PROGRAMMING

Switching on - Automatic station search

Programme organiser - New region

PICTURE FREEZE

INSTALLATION

9/10

ZOOM

–

ZOOM FUNCTION

Volume limitation - Menu language -

Programme number display - Time reference -

Preferred settings

TO CALL UP PREVIOUSLY VIEWED PROGRAMME

PICTURE ADJUSTMENTS

PIP - Format

11/14

14/19

20/21

22/25

26/30

SOUND ADJUSTMENTS

Pro Logic - Loudspeakers - Headphone - AV

PR-

PR+

TO SCROLL THROUGH THE PROGRAMMES

DAY TO DAY OPERATION

Switching on/Selecting programmes - Browse

VOLUME

OTHER FUNCTIONS - EXTRAS

Clock - Child lock - Lock

- Horizontal movement in the menus

- -/+ adjustments of other functions.

CONNECTIONS

Units connected - Calling up audiovisual programmes -

z z

Keys 1 to 0 are used to :

- Select the programmes (from 1 to 99)

- Enter the channels numbers

TELETEXT

31/33

Calling up Teletext - Options - Alarm - How to select -

Subtitles - New flash

- The 0 key is used to call AV inputs 1, 2 and 3.

MANUAL PROGRAMMING

34/35

Norm - Decoder - Channel/Cable - Programme - Fine

Tuning - Station name - Store/Erase - Access to the

organiser.

MUTE

........

STAND-BY

........

BATTERIES : Refer to page 30 for the fitting of the batteries.

Download from Www.Somanuals.com. All Manuals Search And Download.

_cte_onle_nev_cis_tioio_nsn_as_ne_dt_commands

For further details,

see page 26.

ON THE FRONT SIDE

OSD

INSTAL

Connect to A.C.

main supply

ON THE RIGHT

SIDE OF

THE TV-SET

On/Standby light :

220-240 V ~ 50 Hz

Green : On

Red : Standby

On/Off Switch

PR +

Programme Selection

Volume adjustments

Display

OSD

Installation-menu

access button

INSTAL

Download from Www.Somanuals.com. All Manuals Search And Download.

_cte_onle_nev_cis_tioio_nsn_as_ne_dt_commands

AT THE BACK

Ideal setting

S-VHS

and audio sockets

AV3

Front speakers

L = Left

R = Right

VIDEO

L AUDIO R

Listening

area

Headphone

socket Ø 6,35 mm

AV3

VHS and audio sockets

Surround speakers

Connect respectively the red and black terminals of the supplied

speakers to the television’s red and black terminals.

Camcorder

or VHS

Front speaker

S-VHS

Surround speaker

AV2

(IN)

Ψ 75

S-Video

Video

Audio

(OUT)

Aerial*

Inoperative in

Pro Logic mode

Unit 1 Unit 2

AV2

AV1

Camescope

Satellite receiver

Video recorder

Camcorder

Video recorder

Decoder

CDV player

Video games console

We recommend that you use an aerial cable with double isolation.

Download from Www.Somanuals.com. All Manuals Search And Download.

_ate_utl_oe_-pv_ri_os_gi_ro_an_mmse_int_g

This set is equiped with an automatic station search system which is used for :

• Searching for all the stations received in your region and storing them in memory

• Automatically searching for the name of the station

• Automatically allocating a programme number.

WELCOME

BIENVENUE

WILLKOMMEN

WELCOME

BIENVENIDO

BENVENUTO

VÄLKOMMEN

WELKOM

Turn on the television set main power.

The WELCOME menu is displayed.

ENGLISH

Press

key number

[1]

[2]

[3]

[4]

[5]

FRANÇAIS

Appuyer sur la touche

Drücken Sie die Taste

DEUTSCH

ESPAÑOL

ITALIANO

SVENSKA

Pulse

tecla numero

Premere il tasto

If it is not,

Tryck

knapp nummer [6]

[7]

NEDERLANDS Druk op knop nummer

Press the INSTAL button on the television set control panel.

INSTAL

CHOOSE YOUR COUNTRY :

UK :

[ 1 ]

[ 2 ]

[ 3 ]

[ 4 ]

[ 5 ]

[ 6 ]

[ 7 ]

[ 8 ]

[ 9 ]

FRANCE :

GERMANY :

ITALY :

Briefly press the remote control button corresponding to the

number of the language you require for the menus.

SPAIN :

PORTUGAL :

SWISS :

A list of countries appears (on two pages).

To go to the next or previous page, press

AUSTRIA :

Briefly press the remote-control button corresponding to the

country in which you are located,

for example: for England

NETHERLANDS :

BELGIUM :

[ 1 ]

[ 2 ]

[ 3 ]

[ 4 ]

[ 5 ]

[ 6 ]

[ 7 ]

[ 8 ]

[ 9 ]

LUXEMBURG :

SWEDEN :

DANMARK :

FINLAND :

NORWAY :

OTHERS :

The menu which then appears permits the user to:

• start an automatic search,

AERIAL INSTALLATION

Make sure that the aerial cable

and decoder (if any)

are connected to this TV set.

• search for new channels,

[ 1 ] Launch terrestrial installation

[ 2 ] Update the terrest. installation

[ 3 ] Access to the organiser

• access channel organisation.

You can leave the menus at any time by pressing

the

button.

To help you, follow the instructions

at the bottom of the menu (grey background).

AUTO - PROGRAMMING

For the first time or after a change of region :

AUTO - PROGRAMMING

start automatic channel search by pressing the button

Searching for stations and storing them in the memory depends

on the language chosen from the WELCOME menu.

The previously memorised stations are erased.

Searching for stations

10 stations found

AUTO-PROGRAMMING is completed when the cursor is at

the extreme right.

To interrupt the search, press briefly on the

this displays the channel management menu.

key,

Download from Www.Somanuals.com. All Manuals Search And Download.

_ate_utl_oe_-pv_ri_os_gi_ro_an_mmse_int_g

This menu is used to :

• change the programme number,

• change the station number,

• delete a programme.

Programme Organiser

When the automatic search is completed, the

Programme Organiser menu appears.

Scan through to check that the stations found are correctly

numbered and named as you want than:

PR.- PR.+

• IF YES ➡ press briefly

the menu disappears and is replaced by the picture of the pro-

gramme selected.

PR+, PR- Select a station

+, -, 0..9

Blue

Move this programme

Change the name

• IF NO ➡ you make changes as follows

- The programme number

Select the programme number to be changed.

Bring the cursor to the new programme number.

Yellow

Erase this station

To exit, press the (TV) key

PR.- PR.+

Moving PR 06 BBC to PR 04

You may also use the number buttons 0 to 9.

Confirm the change (green button).

- The station name

+, -, 0..9

Green

Give it another number

Confirm change

Red

Cancel change

Programme Organiser

United Kingdom

Press the blue button briefly.

A list of station names per country appears

BBC 1

BBC 2

I T V

CHAN 4

CHAN 5

SKY +

M-GOLD

M-CHAN

CHILD

C N N

SKYONE

DISCOV

UKGOLD

SKYSPO

BRAVO

ESPORT

S-NEWS

M T V

United Kingdom

France

Deutschland

Italia

España

Portugal

Schweiz

Österreich

Nederlands

Belgique

Luxembourg

Sverige

Danmark

Finland

Norge

EUNEWS

+, -

Next/Previous name page

Select a new name

Confirm change

PR+, PR-

Green

Red

Cancel change

Select the country you require.

PR+, PR-

+, -, 0..9

Blue

Select a station

Move this programme

Change the name

If the name appears in the list displayed,

Yellow

Erase this station

select the name

PR.- PR.+

To exit, press the (TV) key

C N N

Confirm the selection (green button).

If the name does not appear in the list displayed,

+, -

Next/Previous position

Select a character

Confirm new name

PR+, PR-

Green

Red

PR.- PR.+

select the "- - - - - -"line

Cancel new name

You have 6 characters to enter a station name

CHILD

S-

To enter a station name,

Press the green button briefly and

the first character flashes.

+, -

Next/Previous position

Select a character

Confirm new name

PR+, PR-

Green

Red

Cancel new name

PR.- PR.+

Select the first character of the new name.

Enter the next character

PR+, PR-

+, -, 0..9

Blue

Select a station

Move this programme

Change the name

and repeat the process up to the last character.

Confirm your choice (green button). The new name is

stored in the memory and the list disappears.

Yellow

Erase this station

To exit, press the (TV) key

Download from Www.Somanuals.com. All Manuals Search And Download.

_ate_utl_oe_-pv_ri_os_gi_ro_an_mmse_int_g

To delete a programme

BBC 1

BBC 2

Select the programme to be deleted.

Press the yellow button.

PR.- _P.PR.+

CANAL+

Confirm your choice (green button).

The programme is deleted

the following programme is selected.

Erase PR 04 CANAL+

Green

R ed

Confirm erase

Cancel erase

You may cancel any unconfIrmed command (change of

programme number or channel name, programme erasure)

by pressind the red

button.

Turn on the television set by pressing

one of the buttons from 1 to 9.

New channels

To search only for new channels.

INSTAL

Press the television set INSTAL button.

Select the country and press the button

When search is finished, the Programme Organiser menu appears.

Reorganise the programmes.

To do this, follow the instructions given on the previous page.

To make the menu disappear, press

installation

With this menu you may:

• Limit the maximum volume.

• Change the menu language (German, Spanish, French, English, Italian, Swedish, Dutch),

• Permanently display the number of the programme being watched,

• Store the time reference programme number,

• Compensate for variations due to the earth's magnetic field.

PREFEREN CES

SET-UP

Press the yellow button then the (-) button.

Max. Volume

Language

The SET-UP menu is displayed

Programme Display

Time reference

IR download

Off

PR 01

(-) No

Yes (+) PR--

Off On

Teletext Fine Tuning

Picture rotation

Maximum Volume Limitation

Select the Max. Volume line (yellow button).

Max. Volume

Language

Programme Display

Time reference

IR download

Off

PR 01

(-) No

Set the maximum volume with the cursor.

Yes (+) PR--

Off On

Teletext Fine Tuning

Picture rotation

The volume cannot be set to zero when using this function.

Download from Www.Somanuals.com. All Manuals Search And Download.

television set

installation

Menu language

PREFEREN CES

SET-UP

Select the Language line (yellow key).

Select

GB : English

: Italian

Max. Volume

: French

: German

: Spanish

: Swedish

Language

Programme Display

Time reference

IR download

Off

PR 01

(-) No

NL : Dutch

Yes (+) PR--

Off On

Teletext Fine Tuning

Picture rotation

All the menus will be displayed in the language selected.

Programme number display

Select the Programme Display line (yellow key).

Max. Volume

Language

Select :

• Off

no permanent display.

the programme number

is permanently displayed

Programme Display

Time reference

IR download

Off

PR 01

(-) No

•

Yes (+) PR--

Off On

Teletext Fine Tuning

Picture rotation

Time reference

Select the Time reference (yellow key).

The television set internal clock must be set.

This synchronises automatically when the television set is

turned on to a programme broadcasting Teletext, you can

opt to select any one of the 4 channels - BBC1, BBC2, ITV, CH4.

Select the corresponding programme number.

Max. Volume

Language

Programme Display

Time reference

IR download

Off

PR 01

(-) No

Yes (+) PR--

Off On

Teletext Fine Tuning

Picture rotation

PR.- PR.+

The IR download line has no effect on your TV set.

Teletext Fine Tuning

This adjustment allows writing errors (missing letters) on the tele-

text pages of French networks (L Standard) to be reduced.

To do this,

Teletext Fine Tuning

Off

On must be selected in the Teletext Fine Tuning line.

This adjustment is not active for B, G, D, K, K' and

I standards.

Magnetic field correction

Max. Volume

This adjustment compensates for disturbances due to the Earth’s

magnetic field.

Language

Programme Display

Time reference

IR download

Off

PR 01

(-) No

Select the Picture rotation line.

Yes (+) PR--

Off On

Teletext Fine Tuning

Picture rotation

Adjust

so that the selected menu is horizontal if it was

not before.

PREFERENCES

PREFEREN CES

SET-UP

This menu enables you to save your preferred settings.

Press the yellow or pink key repeatedly to return to the

Menu contents line.

Volume

Brightness

Colour

Press to display the PREFERENCES menu.

Select the line required with the yellow key.

Set with the key.

Contrast

PREFEREN CES

Resets to these preferences

Volume

Brightness

Colour

Erase the menu.

Contrast

Resets to these preferences

To return to your preferred settings at any time,

press the pink key.

Download from Www.Somanuals.com. All Manuals Search And Download.

_pte_icl_te_urv_eis_adio_jun_stmse_ent_ts

You may adjust the picture

settings at any times.

PICTURE

Press the green key.

PICTURE

PIP

FO RMAT

The PICTURE menu is displayed :

PICTURE is selected.

Brightness

Colour

If this is not the case, select the Contents line using the

green key and Picture with the key.

Contrast

P_iI_gC_iT_tU_alR_ME_asteringPIP

FO RMAT

Off

Select the Brightness line (green key).

Brightness

Colour

Contrast

Adjust the brightness.

Digital Mastering

Off

Repeat the same procedure to select and adjust the Colour,

and Contrast.

Brightness

Colour

Contrast

The TINT line only appears if the source is

NTSC from an AV1, AV2 or

AV3 audio-visual programme.

igital Mastering

Tint

Digital Mastering

PICTURE

PIP

FO RMAT

Select the Digital Mastering line (green key).

Select the option required.

Brightness

Colour

When changing channels, Digital Mastering automatically

returns to On.

Contrast

Digital Mastering

Off

The process suppresses flicker from the TV image. In

addition, Digital Mastering improves image quality

with a further reduction of the trembling effect. The

images are more stable, sharper and less straining to

the eyes. Finally, image noise is reduced

automatically according to reception quality

(INR system : Intelligent Noise Reduction).

Gives you several possibilities

for programmes inlays.

PIP (Picture in picture)

You use this function to :

• inlay in one of the corners of the screen (P I P) :

– images from the input connectors (AV1, AV2, AV3 or RGB),

while viewing a channel ;

– or one of the channels, while viewing a programme from one

of the audiovisual input connectors (AV).

• inlay on the screen in groups of 12, all the channels in memory

(Channel guide).

PICTURE

PIP

FO RMAT

Press the green button once or several times to select

the Contents line.

PIP

Off

Source

(-)

(+)

Channel Guide

Change Corner

Select P I P.

The PIP menu appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

_pte_icl_te_urv_eis_adio_jun_stmse_ent_ts

Image inlay (PIP)

Use the green button to select the PIP line.

Press briefly to select : Off : no picture in picture

: picture in picture

PICTURE

PIP

FO RMAT

Use the green button to select the Source line.

As required select :

the AV1, AV2, AV3 or RGB picture, or a channel in memory.

PIP

Off

Source

(-)

(+)

Channel Guide

Change corner

(+)

Picture in picture is in 4/3 or 16/9 format depending

on the format of the AV image.

Inlaid image position

Use the green button to select the Change Corner line.

PICTURE

PIP

FO RMAT

Select position 1, 2, 3 or 4.

PIP

Off

Source

(-)

(+)

Channel Guide

Change corner

(+)

Press to erase the menu.

Picture swap

Press the

button,

to swap the image being viewed and the PIP image.

Scanning all inlaid image programmes

0/AV

Select an AV image on the screen.

Repeatedly press the PR +/- button

on the remote control to scroll through PIP displays of all

stored programmes and the other AV programmes.

Press a long time to remove the PIP.

Download from Www.Somanuals.com. All Manuals Search And Download.

_pte_icl_te_urv_eis_adio_jun_stmse_ent_ts

You can display on the screen, in group of

12, all the channels stored in memory.

Mosaic

Press the green button once or several times

to select the Contents line.

Select P I P.

PICTURE

PIP

FO RMAT

Press the green button repeatedly

to select Channel Guide.

PIP

Off

(+)

Source

(-)

(+)

Press the key.

Channel Guide

Change corner

The screen goes grey and the channels become inlaid

With the corresponding programmes numbers superimposed.

The Channel Guide programmes change every 3 seconds.

When the Channel Guide appears,

the sound goes off.

To display the programme you want on screen,

press the

button when the image of that

programme is animated

Activating the Channel Guide feature cancels any inlays.

To clear the Channel Guide, press the TV button.

FORMAT

Press the green button once or several times

to select the Contents line.

PICTURE

PIP

FO RMAT

Select FORMAT.

Format

4/3

Off

16/9

Subtitles Zoom

The following menu is displayed.

Format

PICTURE

PIP

FO RMAT

Select the Format line (green key).

Select 4/3 or 16/9 depending on the picture format.

The Subtitles Zoom line only appears when 4/3 is selected.

Some transmitters can transmit a format command W.S.S.

(Wide Screen Signaling). Your television set adapts

automatically to the format being transmitted (e.g.

Cinemascope, subtitles, 16/9). In the absence of this

command, the image returns to the last format selected

with the Zoom button.

Format

4/3

Off

16/9

Subtitles Zoom

PICTURE

PIP

FO RMAT

The format can also be selected automatically when the

source is one of the two Euro-AV sockets AV1 or AV2.

In this case, select AUTO which is only displayed for

sources AV1 and AV2.

Format

4/3

16/9

Auto

The format is stored in memory for AV1, AV2 and AV3.

Download from Www.Somanuals.com. All Manuals Search And Download.

_pte_icl_te_urv_eis_adio_jun_stmse_ent_ts

Subtitles Zoom

PICTURE

PIP

FO RMAT

Select the Subtitles Zoom line (green key).

You may select

Off : programme without subtitles.

On : subtitled programmes.

Format

4/3

Off

16/9

Subtitles Zoom

In this case, an additional line (Subtitles position) appears

You may choose between a higher or lower framing, for example,

for sub-titled programmes.

PICTURE

PIP

FO RMAT

Select Subtitles position (green key),

then set your picture lift.

Format

4/3

16/9

Subtitles Zoom

Off

Remove the menu from the screen.

Subtitles position

Down (-)

up (+)

_ste_oule_ndvi_as_di_jo_usn_tms_ee_nt_ts

Dolby* Surround Pro Logic

Derived from the DOLBY STEREO system used in cinemas, Dolby Surround Pro Logic enables you to re-create the

acoustic environment of the cinema in your own home (with a Dolby Surround signal), or to obtain enhanced sound

effects (with a mono or stereo signal).

You have three options :

• Connect two sets of speakers (Pro Logic),

• Connect one set of speakers (Dolby Surround or Dolby 3 Stereo),

• Use the television sound system only (Pro Logic mode off).

Make sure that the following steps are carried out in the order shown.

• Turn off the television at the main power switch.

• Connect the speakers to the appropriate sockets and make sure that the black speaker terminals on the speakers are

connected to the black terminals on the television, and likewise for the red terminals.

• Configure the television for the speakers that are connected or for the acoustic effect you wish to obtain.

• Balance the acoustic environment.

When these steps have been completed, you can carry out the other sound settings.

* “ DOLBY “ and the double D symbol are registered trade-marks belonging to the Dolby Laboratories Licencing Corporation.

Download from Www.Somanuals.com. All Manuals Search And Download.

_ste_oule_ndvi_as_di_jo_usn_tms_ee_nt_ts

CONNECTING THE SPEAKERS

To benefit from the Dolby Surround Pro Logic system, you must connect to your television set

4 loudspeakers :

- 2 front speakers

- 2 surround speakers

}

Speakers, ref. DPL 4 K delivered

Front speaker

Surround speaker

To select the speakers you have connected, you must configure your television set :

SPEAKER CONFIGURATION

The following menu is displayed:

SPEAKER CO N FIGURATIO N BALAN CE

Press

2 times

Configuration

Select the Configuration line.

Depending on the speakers connected, or the audio effect

preferred, choose one of the configurations offered.

ACOUSTIC EFFECT

CONFIGURATION

Mono signal

Stereo signal

TV speakers only

TV speakers +

Stereo effect

Wide stereo

Front speakers

TV speakers +

Surround speakers

TV speakers +

Front speakers +

Surround speakers

or Dolby 3 Stereo

Dolby Surround

or Hall

Matrix*

Pro Logic

or Hall

*Matrix : sound delay in the rear speakers.

Press briefly to remove the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

_ste_oule_ndvi_as_di_jo_usn_tms_ee_nt_ts

LOUDSPEAKERS

Press the red button

The following menu is displayed: LOUDSPEAKERS is selected.

LO UDSPEAKERS HEADPHO N ES AV

Sound

Auto/Stereo

Normal

Mono

Wide

Effect

If this is not the case, select the Contents line with

TV Treble

TV Bass

the red key

and LOUDSPEAKERS with

Select the SOUND line.

Sound

Auto/Stereo

Mono

This varies depending on the sound type received:

SOUND

MONO/STEREO or NICAM Stereo*

Sound

Mono

Sound Sound 1

Sound 2

DUAL (2 languages)

NICAM 3*

Sound Sound 1 Sound 2 Sound 3

Source Stereo Sound 1 Sound 2

Select the required sound for the loud speakers.

For normal operation, AUTO/STEREO position is

recommended. STEREO or MONO will be selected

automatically depending on the signal received.

*NICAM is a digital sound transmission system, it enables you to receive broad-

casts in high quality STEREO or DUAL SOUND. Analogue MONO sound is trans-

mitted simultaneously, (MONO in NICAM STEREO or SOUND 3 in NICAM 3).

Effect

Select the LOUDSPEAKERS line

LO UDSPEAKERS HEADPHO N ES AV

Sound

Auto/Stereo

Normal Hall

Mono

Dolby

The number and type of selections available varies

according to the configuration selected (see p. 15).

Effect

Treble

Bass

TV treble

TV bass

Depending on the selected configuration,you will be able to

choose betwen 2 or 3 of the following options :

Normal, Wide, Hall, Dolby.

Select the type of sound required.

According to which selection and configuration is chosen (see

page 15), you will obtain one of the sound effects shown on the

table below.

When the type of sound received changes (mono to stereo or

vice versa), the sound effect automatically becomes that selected

for the type of sound received.

Press briefly to remove the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

_ste_oule_ndvi_as_di_jo_usn_tms_ee_nt_ts

EFFECT SELECTION

CONFIG.

SOUND

AUDIO

Normal

Wide

Hall

Dolby

Mono

Stereo

Mono

Stereo

Mono

Stereo

Mono

Stereo

Mono

Stereo

Mono

Stereo

Mono

Stereo

Mono

Stereo

Pseudo-Stereo

Wide stereo

Pseudo-Stereo

Wide stereo

Dolby 3 Stereo

Dolby Surround

Pro Logic

Matrix

Hall

Matrix

Hall

BALANCE

Press the SOUND button then the (–) button.

The following menu is displayed :

SPEAKER CO N FIGURATIO N BALAN CE

The menu varies depending on which configuration is selected.

• Configuration 1

Select the Left/Right line.

Left/Right

Balance the sound between the two audio channels.

• Configuration 2

SPEAKER CO N FIGURATIO N BALAN CE

Adjust the balance on the front speakers, and the sound level on

the central loudspeakers as shown in the chapter BALANCING THE

ACOUSTIC ENVIRONMENT.

Test Signal

Left/Right

Centre

Off

Volume

• Configuration 3

SPEAKER CO N FIGURATIO N BALAN CE

Adjust the balance on the front speakers and the sound

level on the surround speakers, as shown in the chapter

BALANCING THE ACOUSTIC ENVIRONMENT.

Test Signal

Left/Right

Surround

Volume

Off

• Configuration 4

Adjust the balance on the front speakers and the sound

level on the surround speakers, as well as the sound level

on the central loudspeakers as shown in the chapter

BALANCING THE ACOUSTIC ENVIRONMENT.

SPEAKER CO N FIGURATIO N BALAN CE

Test Signal

Left/Right

Surround

Centre

Off

Volume

Press briefly to remove the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

_ste_oule_ndvi_as_di_jo_usn_tms_ee_nt_ts

BALANCE THE ACOUSTIC ENVIRONMENT

When you have selected the configuration you require, you can

then balance the acoustic environment (except for selection 1 :

TV only).

SPEAKER CO N FIGURATIO N BALAN CE

The instructions given below explain how to set up the

configuration (selection 4).

Test Signal

Left/Right

Surround

Centre

Off

SPEAKER CO N FIGURATIO N BALAN CE

With the BALANCE menu displayed

Select the Test Signal line.

Volume

Test Signal

Left/Right

Surround

Centre

Off

Press the + or - button to highlight On in red letters.

Volume

The sound from the programme being watched is replaced by a

”white noise” sound which is transmitted to each of the channels

in turn (Left, Center, Right and Surround).

The adjustment consists of balancing the sound level of the four

channels so that the noise has the same sound level on each of

them.

SPEAKER CO N FIGURATIO N BALAN CE

Test Signal

Left/Right

Surround

Centre

Off

Select the Left/Right line

Volume

Balance the sound level for the speakers on the right and on the

left.

Test Signal

Left/Right

Surround

Centre

Select the Surround line.

Volume

Using the + or - buttons, increase or reduce the sound level for

the rear speakers (Surround).

Test Signal

Left/Right

Surround

Centre

Select the Centre line.

Volume

Increase or reduce the sound level on the television speakers.

The above settings are correct when the sound level for the

noise is identical on each of the channels.

Test Signal

Left/Right

Surround

Centre

Volume

Press repeatedly to select the Test Signal line.

Briefly press the + or - buttons to highlight Off.

TONE ADJUSTMENT

The following menu is displayed :

LOUDSPEAKERS is selected.

LO UDSPEAKERS HEADPHO N ES AV

Select the Treble and Bass lines in turn, and

Sound

Auto/Stereo

Normal Hall

Mono

Effect

Treble

Bass

Dolby

increase or reduce the treble or bass frequency level on

the speakers, and the level on the front speakers if

they are connected.

TV Treble

TV Bass

Press briefly to remove the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

_ste_oule_ndvi_as_di_jo_usn_tms_ee_nt_ts

HEADPHONES

Press briefly

LO UDSPEAKERS HEADPHO N ES AV

The following menu is displayed :

HEADPHONES is selected.

If this is not the case, select the Contents line with the red

Headphones

button

and HEADPHONES with

Select the Headphone line (red key).

You can then adjust the volume for the headphone.

Headphones

Note : When the transmission is multilingual (DUAL) or

an AV programme, the following menu appears. It is

possible to select Sound 1 or Sound 2 in the headset.

Source

Sound 1

Sound 2

Headphones

Select the Source line:

then select

Sound 1

Sound 2

The sound output on sockets AV1 and AV2 must be adjusted

according to the type of headset connected.

LO UDSPEAKERS HEADPHO N ES AV

Press briefly.

AV Device

Stereo

Mono

The following menu is displayed :

AV is selected.

If this is not the case, select the Contents line with

the red key

and AV with

LO UDSPEAKERS HEADPHO N ES AV

Select the AV Device line (red key).

AV Device

Stereo

Mono

Then select

Stereo

Mono

= stereo VCR

= mono VCR

Selecting stereo permits simultaneous recording of both

languages of a bilingual programme on a stereo video recorder :

Sound 1 on the left track and Sound 2 on the right track.

The sound available at the AV1 and AV2 outputs must be

adjusted according to the type of device connected.

Press to remove the menu from the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

_dte_ayle_tovi_ds_ai_yo_on_pes_re_att_ion

SWITCHING ON / SELECTING PROGRAMMES

Switch on the television set with the mains switch if the standby

light is off.

If the standby light is on, select the programme required by the

remote control or the PR-/+ buttons on the front of the set.

PR 02

BBC 2

PR.- PR.+

For the programmes 1 to 9 :

0/AV

Press the corresponding number briefly.

PR 1 -

PR 14

For programmes 10 to 99 :

Hold on to display the tens.

Press briefly to display the units.

BROWSE

BRO W SE

CLO CK

LO CK

This comprises 10 pages of 10 programmes each, giving for each

programme number : the station name (if it has been

programmed).

PR 02 BBC 2

05 MOVIES

06 S-NEWS

07 M-GOLD

08 M-CHAN

09 CHILD

01 BBC 1

02 BBC 2

03 I T V

04 CHAN 4

The BROWSE menu is displayed.

+,-

Next / Previous page

0..9

Select a programme

BRO W SE

CLO CK

LO CK

To select the directory page displayed.

PR 02 BBC 2

05 S-NEWS

06 MOVIES

07 M-GOLD

08 M-CHAN

09 CHILD

To select the other pages, press repeatedly.

Example : Page 6 (programmes 50 to 59)

01 BBC 1

02 BBC 2

03 I T V

04 CHAN 4

Press 5 times

+,-

Next / Previous page

0..9

Select a programme

To select a programme from the page displayed,

press only the unit digits of the programme

selected (example for 53: press 3).

PR 53

50/AV

Programme PR 00 corresponds to the last audiovisual

programme (AV1, AV2 or AV3).

Press briefly to select BROWSE again.

+,-

Next / Previous page

Select a programme

0..9

Press briefly to remove the directory from the screen.

Volume

Set the volume as desired.

Volume

When the headphones are plugged in, you can adjust the volume

of the headphones or loudspeakers :

Headphones

Loudspeakers

Select the line you wish to adjust.

Sound mute

Pressing once turns the sound off. The sound returns

if the button is pressed once more.

Mute

Download from Www.Somanuals.com. All Manuals Search And Download.

_dte_ayle_tovi_ds_ai_yo_on_pes_re_att_ion

RETURN TO PREFERRED SETTINGS

Press briefly to return to personal adjustments

(PREFERENCES menu)

DISPLAY / ZAPPING

Displays details of the station being watched (programme name

and number, time).

Zoom 1

PR 06

11 : 35

PR.- PR.+

Press repeatedly to scroll through the programmes.

MOVIES

PICTURE FREEZE

Press key,

The picture freezes instantly

The transmission continues

The still picture cannot be recorded.

Press briefly to return to the programme being viewed.

LAST PROGRAMME VIEWED

Last

This function is used to switch rapidly between 2 programmes.

Display

programme

viewed

Picture

freeze

Press the key.

The previously viewed programme is selected.

ZOOM

Zoom

ZOOM

–

Press to enlarge or reduce the picture.

PR.-

PR.+

Zapping

ZOOM

z z

Zoom O

(4/3)

Zoom 1

(full screen

picture)

Zoom 2

Zoom 3

Zoom 4

(Subtittle) (Wide picture) (16/9)

ZOOM

–

Zoom O

Zoom 1

Zoom 2

Zoom 3

Zoom 4

0/AV

Zoom 2 : image enlarged and moved up for easier reading of

subtitles.

........

Stand-By

STAND-BY

........

Press briefly, the Stand-By light turns red to indicate

that the set is now in standby.

AUTOMATIC STOP

The set is automatically switched to standby a few minutes

after the station being watched stops broadcasting.

Download from Www.Somanuals.com. All Manuals Search And Download.

_ote_thl_ee_rv_fuis_ni_co_tin_ons_se_{- e}t_xtras

CLOCK

BRO W SE

CLO CK

LO CK

Select CLOCK

Sleep-timer

(-/+)

- : - -

The Sleep-timer line is displayed.

Sleep-timer

Select the Sleep-timer line (yellow key).

Sleep-timer

(-/+)

- : - -

Set the time in steps of 15 minutes (up to 4 hours).

2 : 1 5

Remove the menu from the screen.

The set will switched to standby at the end of the timer interval.

You can display the time left before the stop time.

Press the TV key briefly

Sleep-timer

(-/+)

0 : 0 1

One minute before sleep timer time, the screen displays that sleep

timer is imminent.

The standby lamp flashes to indicate the CHILD LOCK state.

The television set can only be turned on with the remote

control.

You may cancel sleep timer command.

BRO W SE

CLO CK_{1 : 4 5}LO CK

(-/+)

Select the Sleep-timer line.

Sleep-timer

Press repeatedly to return to : - : - -

Sleep-timer

(-/+)

- : - -

Remove the menu from the screen.

Putting the television set on standby when a sleep timer

command is programmed, also cancels this function.

Clock (automatic on)

You can programme your television set to switch on

automatically to the programme of your choice.

The internal TV clock must be set to the correct time.

BRO W SE

CLO CK

LO CK

Sleep-timer

(-/+)

- : - -

Press briefly on the key.

Select the CLOCK menu.

Wake-up time 00:00

Select the Wake-up time line (yellow key).

The first figure flashes.

Mode

Off

Once Daily

Programme

Current time 00:11

Download from Www.Somanuals.com. All Manuals Search And Download.

_ote_thl_ee_rv_fuis_ni_co_tin_ons_se_{- e}t_xtra

To set the clock to the right time.

BRO W SE

CLO CK

LO CK

0/AV

Enter the Wake-up time using 24 hour format.

Wake-up time

06:45

Select the Mode line (yellow key).

Select

Off

Once

= the alarm is off

= the alarm will only go off once

Wake-up time 06:45

Mode

Off

Once

Daily

Daily = the alarm will go off everyday

Programme

Current time 00:11

If a new alarm is programmed, Once is selected

automatically.

Select the Programme, line (yellow key).

Select the programme for the alarm.

Remove the menu from the screen.

Wake-up time 06:45

Mode

Off

Once

Daily

Programme

Current time 00:11

........

Turn the television set on to standby.

It will turn on automatically at the time programmed

and turn off one hour after.

If the set is switched on before the alarm function is

actived, it will not switch to the programme selected for

the alarm at the programmed time.

It is possible to programme both the automatic switching

off (STANDBY) and switching on (ALARM) of the set. In

this case the automatic switching on time must be

programmed to take place after the switching off time.

CHILD LOCK

You can prohibit the use of your television set using the keypad.

Use of the TV set is prohibited :

- after the sleep timer function ;

- when the set is switched to standby and a sleep timer

command is programmed ;

........

- when the set is turn off at the mains and a sleep timer

command is programmed ;

- when a wake-up command is programmed.

- after switching off the TV set by holding down the standby

button on the remote control for more than 3 seconds.

The CHILD LOCK function is indicated by the flashing of the

indicator lamp.

The set can only be switched back on using the remote

control.

Download from Www.Somanuals.com. All Manuals Search And Download.

_ote_thl_ee_rv_fuis_ni_co_tin_ons_se_{- e}t_xtra

This function enables you, for example,

to prevent your children from watching certain programmes by

“locking“it so that the set cannot be switched on. The set can

be “unlocked“ with a PIN number

LOCK

BRO W SE

CLO CK

LO CK

Press the yellow key

to select the menu Contents line,

then the volume (+) key

to select LOCK. The following menu is displayed.

Enter your PIN number

- - - -

Enter your PIN number

Press the yellow key briefly to select the line

Enter your PIN number

- - - -

1 1 1 1

Enter your PIN number.

Then enter your PIN number figures

(example : 1111).

The menu displays :

Enter your PIN number

Store your PIN number (+)

Press the yellow button briefly to select the line

Enter your PIN number

Store your PIN number (+)

1 1 1 1

- - - -

Store your PIN number.

Press the volume (+) key briefly.

The code is stored in the memory and the menu displays :

Change your PIN number

Access the programme list (+)

If your previous code has been divulged.

Change your PIN number

Enter the your new code numbers (example : 1234).

The previous menu then returns.

Change your PIN number

1 2 3 4

Access the programme list (+)

Press the yellow button briefly to select the line

Store your PIN number.

Change your PIN number

1 2 3 4

Store your PIN number (+)

Press the volume (+) key briefly.

The new code is stored in the memory and the menu displays :

Change your PIN number

- - - -

To cancel a lock, perform the above steps by entering “0000”

at the “Change your PIN number” line.

Access the programme list (+)

When you enter a code for the first time, the figures replace

the dashes ; where not, the dashes are replaced by an

asterisk.

Change your PIN number

Access the programme list (+)

* * * *

Access the programme list

Press the yellow key briefly to select the line

Access the programme list (+).

BRO W SE

CLO CK

LO CK

Press the volume (+) key briefly.

A page of the directory appears depending on the programme

being watched (example : page 1, programme 6 : M6).

Change your PIN number

Access the programme list (+)

- - - -

Select the programme you wish to Lock or Unlock :

PR.- PR.+

Download from Www.Somanuals.com. All Manuals Search And Download.

_ote_thl_ee_rv_fuis_ni_co_tin_ons_se_{- e}t_xtra

BRO W SE

CLO CK

LO CK

ZOOM

To Lock, briefly press the zoom (+) key

the programme locked turns to red,

PR 06 MOVIES

05 S-NEWS

01 BBC 1

06 MOVIES

07 M-GOLD

08 M-CHAN

09 CHILD

ZOOM

–

02 BBC 2

03 I T V

04 CHAN 4

To Unlock, briefly press the zoom (-) key

the programme unlocked turns to blue.

Select a programme with PR+, PR -

Lock / (Unlock) with ZOOM + / (ZOOM -)

To lock or unlock other programmes :

• Select the directory range with the keys

PR.- PR.+

• Select the programme, including the audiovisual programmes

AV1, AV2 or AV3 with keys

ZOOM

• Lock the programme with the key

ZOOM

–

• Unlock the programme with the key

After locking or unlocking all of the required programmes, erase

the menu with the key

To access this programme

Enter your PIN number

The locked programmes cannot be obtained using

the Pr -/+ keys on the remote control and the keypad.

If they are selected using the remote control number buttons, the

following message is displayed on the screen :

- - - -

Incorrect PIN number

• If you do not enter the right code, the message Incorrect PIN

number will appear above the first one.

The programme does not change and after a few seconds, both

messages disappear.

To access this programme

Enter your PIN number

- - - -

• If you enter the right code, the programme selected appears

immediately.

When the code is entered once to unclock a programme, all

of the programes which were locked are also unlocked.

The lock will be re-activated after the set is turned off.

ACCESS TO THE STATION TUNING MENUS

When there is at least one programme locked, access to the

station tuning menus Auto-Programming and Manual

Programming is also locked.

If you call up one of these menus, the following message appears

on the screen.

To access this menu

Enter your PIN number

* * * *

Briefly press the yellow key to select the line

Enter your PIN number if it is not already selected.

To access this menu

Enter your PIN number

- - - -

Incorrect PIN number

Enter your code number and the menu appears immediately

If the code is not correct, the message Incorrect PIN number

appears for a few seconds.

To access this menu

Enter your PIN number

- - - -

If you forget your personal code,

see last page of instructions booklet .

Download from Www.Somanuals.com. All Manuals Search And Download.

_cte_onle_nev_cis_tioio_nsn set

VIDEO RECORDER CONNECTIONS

Refer to your VCR

manual

VIA THE AERIAL SOCKET

To tune your TV into your VCR you should refer to Manual

Programming (page 34).

The channel number (usually 36 or 60) is given in the manual of

your VCR. The programme selected for your VCR must be 9, 19

or 29.

Whenever you wish to use your VCR, you must select the

programme assigned to it.

VIA THE EURO-AV SOCKET 1 (AV1)

Video recorder

and/or

This is used to connect :

AV 1

• Satellite receiver or decoder

Decoder

and/or

• a VHS or 8mm video recoder or camcorder (VIDEO)

or a S-VHS or Hi-8mm video recorder or camcorder (S-VIDEO)

• a PC or video games console (RGB).

Satellite receiver

Camcorder

PC or video

games console

VIA THE EURO-AV SOCKET 2 (AV2)

Video recorder

and/or

This is used to connect :

• a VHS or 8mm (VIDEO), S-VHS or Hi-8mm (S-VIDEO) video

recorder.

Satellite

receiver

AV 2

If you have two VCRs connected, the decoder must be connected to the VCR connected to the

Euro-AV1 socket.

If you have a satellite receiver, refer to the operating manual in order to find out the type of

signal delivered then select VIDEO, S-VIDEO or RGB.

You can also connect it to the decoder socket of the second VCR if the latter is fitted with one.

VIA THE AUDIO/VIDEO/S-VIDEO SOCKETS (AV2)

This is used to connect :

• an S-VHS or Hi-8mm video recorder (S-VIDEO)(S and AUDIO

sockets).

(IN)

S-Video

Video

Audio

In order to maintain the optimum sound and picture quality

of your set, it is recommended not to connect 2 units to the

Euro- AV1 socket and the AUDIO/VIDEO/S sockets

simultaneously.

(OUT)

VIA THE AUDIO/VIDEO/S-VIDEO SOCKETS (AV3)

This is used to connect :

•

to a camcorder VHS or 8 mm (VIDEO)(VIDEO and AUDIO sockets)

S-VHS or Hi 8 mm (S-VIDEO)(S and AUDIO sockets).

VHS

VIDEO L AUDIO R

S-VHS

Download from Www.Somanuals.com. All Manuals Search And Download.

_cte_onle_nev_cis_tioio_nsn set

Your television set selects and

automatically displays in the menu the type

of signal (Video or S-Video) for

Signal

Name

Video

RGB

the equipment connected.

Signal

Name

S-Video

RGB

UNITS CONNECTED

EURO

AV 1

EURO

AV 2

AUDIO/VIDEO/

S-VIDEO AV 2 SOCKETS S-VIDEO AV 3 SOCKETS

PAY-TV decoder

VIDEO

Automatic selection

VIDEO

Automatic selection

Satellite receiver

Video recorder VHS/S-VHS

Camcorder

VIDEO

Automatic selection

VIDEO/S-VIDEO

Automatic selection

VIDEO/S-VIDEO

Automatic selection

VIDEO/S-VIDEO

Call AV 2

VIDEO/S-VIDEO

Call AV 3

0/AV

PC / Games console

Select RGB

Call AV 1 0/AV

Name

You may give each piece of equipment connected a name.

Call up the AV 1, AV 2 or AV 3 menu.

AV 1

AV 2

AV 3

Select the Signal line (yellow key).

Signal

Name

Video

RGB

Check the type of signal or select as necessary.

Signal

Name

S-Video

RGB

Select the Name line.

The first dash flashes.

Signal

Name

Video

RGB

You may enter the name of the channel using 6 characters.

Continue to press, the signs, figures and letters are displayed in

alphabetical order.

Continue to press : the letters are shown in reverse order.

When the required character appears, go to next character.

To leave a space look for the blank character (between ? and A)

or press briefly

0/AV

CALLING UP AUDIOVISUAL PROGRAMMES

Press AV to call AV1, AV2 or AV3 programmes in sequence.

In most cases, the television set changes automatically to AV1 or

AV2, when the VCR connected is in play back mode.

When the VCR is stopped, the TV set returns to the station

previously watched.

The TV set changes automatically to 16/9 format if the unit

connected supplies the control voltage and if you have

selected AUTO from the FORMAT menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

_cte_onle_nev_cis_tioio_nsn set

COPYING VIDEO TAPES

It is necessary to have 2 VCRs with the same specifications : 2 VHS/8 mm or 2 S-VHS/Hi-8 mm.

Connect the playback VCR to the Euro-AV1 socket in playback mode.

Connect the recording VCR to the Euro-AV2 socket in recording mode.

During the copying of the tape, you can watch the station you are copying.

PLAY

CALL UP

RECORD

EQUIPMENT

SOCKET

PROGRAMME

EQUIPMENT

SOCKET

Video recorder

Euro-AV 2

VHS

Euro-AV 1

AV 1

AV 3

Video recorder

Audio/S-Video AV 2

Euro-AV 2

Camcorder

Video recorder

Camcorder

S-VHS

Camcorder

Audio/Video/S-Video

(at the back)

Audio/S-Video AV 2

SPEAKERS CONNECTIONS (OTHER OPTIONS)

CENTRAL SPEAKER

• Direct connection

If preferred, one or two speakers can be connected to replace the loudspeakers on your television set, as shown below :

Dummy plug to cut the

sound from the second

internal loudspeaker

(if you plug one speaker only)

Unit 2

Unit 1

In this case, the speakers must be placed beneath the television set.

CONNECTION TO A HI-FI SYSTEM

To boost the audio power, you may connect a Hi-Fi system, if you have one.

You must however avoid connecting your Hi-Fi and speakers to similar outputs (e.g. Hi-Fi on the CINCH surround

socket and speakers on the surround clips).

In this case, the configuration of the television set will match that described on page 15.

For a full appreciation of Dolby Surround Pro Logic sound, your television set should be placed in a spacious

room.

Download from Www.Somanuals.com. All Manuals Search And Download.

_cte_onle_nev_cis_tioio_nsn set

• Dolby Surround Pro Logic

Surround

speaker

Surround

speaker

Hi-Fi

After making the connection, choose configuration 4 from the SPEAKER CONFIGURATION menu, and Dolby from

the LOUDSPEAKERS menu.

Then proceed to the adjustment of the audio environment.

To do so, call up the BALANCE menu (page 17) and proceed as shown.

You should also adjust the volume of your Hi-Fi.

If you have an amplifier or another Hi-Fi :

Hi-Fi

Amplifier

Dummy plug :

Cut the sound

Dummy plug :

Cut the sound

from the internal

loudspeaker

from the internal

loudspeaker

Unit 1 Unit 2

After making the connection, choose :

- configuration 4 from the SPEAKER CONFIGURATION menu

- and Dolby from the LOUDSPEAKERS menu.

Then proceed to the adjustment of the audio environment.

To do so, call up the BALANCE menu (page 17) and proceed as shown.

You should also adjust the volume of your Hi-Fi.

Download from Www.Somanuals.com. All Manuals Search And Download.

_cte_onle_nev_cis_tioio_nsn set

• WIDE STEREO/Dolby 3 Stereo

Hi-Fi

After making the connection, choose :

- configuration 2 from the SPEAKER CONFIGURATION menu

- and from the LOUDSPEAKERS menu to obtain wide stereo

- or Dolby to obtain Dolby 3 Stereo sound.

Then proceed to the adjustment of the audio environment.

To do so, call up the BALANCE menu (page 17) and proceed as shown.

You should also adjust the volume of your Hi-Fi.

FITTING BATTERIES

Remove the cover at the back of the remote control and

insert 2 LR03 (AAA) 1.5 V type batteries.

For a cleaner environment, please dispose of used

batteries in the containers provided for this

purpose.

Download from Www.Somanuals.com. All Manuals Search And Download.

television set

teletext

Your television set is equipped to receive teletext. There are 3 types of teletext :

• Teletexte (France-Europe),

• Fastext (UK, Spain),

• Toptext (Germany)

If you notice writing errors (missing letters) on the teletext pages of French networks (L Standards), check :

• That you have good reception

• That On is selected in the Teletext Fine Tuning line of the SET-UP menu (see page 10).

CALLING UP TELETEXT

S100 SKYTEXT 100

Tue 18 Oct 1544:10

Select a station on which there is Teletext (for France, TF 1, FR2).

0/AV

A - Z

INDEX ON

199

Press once or twice the blue key,

WHAT'S ON YOUR TV GUIDE......110

TV GUIDE.....110

CABLE........140

RADIO........145

SUSCRIBE.....150

FINANCE......200

SHARES.......220

LOANS........288

WEATHER......300

the contents page (Page 100) appears.

You may enter the page number required

(3 figures).

Example: page 170, enter 1, 7, 0 (the number is displayed at the

top left of the screen).

NEWS FLASHES: SPORT 104 FINANCE 239

ON SKYSPORTS: SPORT, FOOTBALL, RACING

HENNESSY GOLD CUP BREAK SkyOne p 365

GUIDE

FAVORITE

DISPLAY

110

SUBCODE

200

When the page is found, it appears on the screen.

You can move through the pages to select them.

ZOOM

–

PR.- PR.+

While the teletext is displayed, you may adjust or turn off

the volume.

To quit Teletext, press

GUIDE

FAVORITE

DISPLAY

110

SUBCODE

See next page.

200

OPTIONS

The two menu lines, under the Teletext page, are different,

depending on the type of Teletext received (Teletext, Fastext,

Toptext) and your selection (see page 33).

GUIDE

FAVORITE

DISPLAY

110

SUBCODE

200

You may select different options using the top line of this menu.

These are shown in colour.

Briefly press the corresponding colour key

(red, green, yellow, blue).

FAVORITE

DISPLAY

SUBCODE

100 200 300 400 500 600

GUIDE

HOLD

FAVORITE

DISPLAY

ZOOM

SUBCODE

MIX

The menu bottom line is then activated.

GUIDE

CLEAR

FAVORITE

DISPLAY

SUBCODE

To select options from the bottom line, press the equivalent

colour button.

ALARM ON

Subpage No

To return to the first line of the menu, press the pink key.

ALARM

If the teletext transmits an alarm page, you can make it come up at a set time.

While entering the number of the alarm page (E. G. TVE : 697, ORF : 784). Then enter the digits to choose the time

(e.g., for 20.45, type 2, 0, 4, 5) and hold down the last digit until the teletext is removed.

At the chosen time, the alarm page will appear on the screen.

To erase the alarm page, first press the blue key then the key

Download from Www.Somanuals.com. All Manuals Search And Download.

When the red

and green

rectangles are displayed in these menus, pressing

the red key displays the previous page, pressing

the green key displays te next page.

television set

teletext

100

TOP Menu

ARD11:25:49

NACHRICHTEN

FINANZ-INFOS

SPORT

UEBERSICHT

Key Type

Name

Functions

Menus

WETTER

DIE AKTUELLE

DOLLARKURS

WOCHENSCHAU

LOTTO/SPIELE

A-Z/ADRESSEN

FERNSEHEN

TV HEUTE

TV-MORGEN

SUBPAGES

DISPLAY

SUBCODE

UEBERSICHT

Displays Toptext menu (red key).

DIE AKTUELLE

TOP-Overview

DIRECT

retour

THEME

SUBCODE

CHAPITRE

DIRECT

Directly displays the priority pages determined by the

DIRECT

SUBPAGES

DISPLAY

Direct page : ÜBERSICHT 2

station (red and green keys).

TOPTEXT

PREVIEW

GUIDE

Displays TV programme page (red and green keys)

TV PROG

GUIDE

SUBPAGES

DISPLAY

SUBCODE

TV PROG : TV HEUTE

Displays subject (yellow key) or field (blue key)

SUBPAGE

DISPLAY

TV-TIPS

SUBCODE

TV-MORGEN

Red

INDEX

GUIDE

SUBPAGES

DISPLAY

SUBCODE

INDEX

GUIDE

Calls up Contents page (red key).

INDEX PA 100

FASTEXT

Selects different heading (red, green, yellow, blue keys)

SUBPAGES

FIN INDEX

DISPLAY

SUBCODE

TV INDEX

HEADLINES

INDEX

GUIDE

Displays Contents page (red key).

INDEX

SUBPAGES

DISPLAY

SUBCODE

INDEX PA 100

You may call :

GUIDE

SUBPAGES

DISPLAY

110

SUBCODE

200

• The previous page (red key)

• The next page

200

TELETEXT

• The first page of the next ten after the page

displayed (yellow key)

110

• The first page of the next hundred after the page

displayed (blue key). Eg : page displayed : 135

-> page called up : 140 or 200

SUBPAGES

Used to display subpages if any.

GUIDE

SUBPAGES

DISPLAY

SUBCODE

The number of the subpage displayed is underlined.

Select subpages with red or green keys.

01 02 03 04 05 06 07 08

TOPTEXT

Green

FASTEXT FAVORITE Allows you to store up to 6 of your favourite teletext pages.

To store your favourite pages, select one of the 6 locations by

FAVORITE

DISPLAY

SUBCODE

231 240 . . . . . . . . . . . .

TELETEXT

using either the red or green keys (the selected location will

have its 3-digit number underlined). Then enter the number

of the required page. Repeat the process for each favourite page.

(There are 6 favourite page locations for each PR number).

DISPLAY

The colour of the buttons depends on the option

required.

GUIDE

SUBPAGES

DISPLAY

ZOOM

SUBCODE

MIX

HOLD

Option selection.

For games :

GUIDE

HOLD

SUBPAGES

DISPLAY

ZOOM

SUBCODE

MIX

Briefly press the green key to see a hidden answer.

TOPTEXT

FASTEXT

TELETEXT

To enlarge the text : yellow key

GUIDE

HOLD

SUBPAGES

DISPLAY

ZOOM

SUBCODE

MIX

Press once : top half of screen doubled in height.

Press twice : bottom half of screen doubled in height.

Press three times : return to normal Teletext.

Yellow

Mix mode :

Briefly press the blue key to overlay the Teletext page on

the TV picture.

GUIDE

HOLD

SUBPAGES

DISPLAY

ZOOM

SUBCODE

MIX

If you wish to stop page scrolling (eg : 4/7)

Briefly press the red key, the page number

replaces «HOLD».

GUIDE

HOLD

SUBPAGES

DISPLAY

ZOOM

SUBCODE

MIX

Press the red key again to continue scrolling.

UPDATE

Automatic renewal of the page displayed.

Press the yellow key, you can watch your TV programme

while waiting for page search to complete.

GUIDE

SUBPAGES

UPDATE

SUBCODE

Back to TV until new page received

When the page is found, the message «PAGE XXX RECEIVED

appears on the screen.

Press the blue button to display the page.

Blue

GUIDE

CLEAR

FAVORITE

UPDATE

SUBCODE

TOPTEXT SUBCODE

FASTEXT

TELETEXT

Enter the subpage number (eg : 0009).

Press the green key.

The TV picture is displayed and as soon as the subpage is

found, it is displayed.

ALARM ON

Subpage No

Download from Www.Somanuals.com. All Manuals Search And Download.

television set

teletext

HOW TO SELECT

Repeatedly press the pink key

to select the possible options under the required colour.

OVERVIEW

FAVORITE

DISPLAY

SUBCODE

TOP-Menu

STORE (+)

GUIDE

TV PROG

DIRECT

OVERVIEW

FAVORITE

DISPLAY

SUBCODE

Red key

: MENU, DIRECT, PREVIEW, GUIDE (Toptext)

INDEX, GUIDE (Teletext or Fastext)

: FAVORITE, SUBPAGE

TOP-Menu

STORE (+)

GUIDE

INDEX

FAVORITE

DISPLAY

SUBCODE

INDEX PAGE 100

STORE (+)

SUBPAGES

INDEX

FAVORITE

DISPLAY

SUBCODE

Green key

Yellow key

Blue key

STORE(+)

UPDATE

DISPLAY

INDEX

HOLD

FAVORITE

SUBCODE

MIX

: DISPLAY, UPDATE

ZOOM

CLEAR

FAVORITE

DISPLAY

SUBCODE

: SUBCODE

Sous-Pages

ALARM ON

Briefly press the same colour key (red, green, yellow or blue) to

select.

To save your choice,

briefly press the (+) button.

SUBTITLES

Some programmes are transmitted with subtitles for the hard of

hearing. These subtitles are received via Teletext on a special page

number. They can be superimposed on the screen by selecting

that page in Teletext mode. Find the appropriate page number

from the Teletext Index page. Enter the number and once the

page has been found, you will see the normal TV programme

with the subtitles superimposed on it.

To erase the subtitles, press twice the key

NEWS FLASH

The latest news can be superimposed on the television picture.

Look up the teletext index to find the page number and enter it.

Once the page has been found, you can watch the normal

television programme. When the lastest news page is updated

it will be superimposed on the picture.

The remote control can be used for sound and picture settings

again. If you switch to another station, the «Latest news»

function is disabled.

If after having seen these news you wish to remove the

display from the screen, press the blue key

followed by the key

Download from Www.Somanuals.com. All Manuals Search And Download.

television set

manual programming

You may use this channel adjustment menu if you do not wish to restart

auto programming (where there are only few channels in your area

or if a new channel is transmitting).

PROGRAMME

TUN IN G

AV1

AV2

AV3

The following menu is displayed :

Norm (-/+)

Decoder

PAL I (UK)

None

AV1

AV2

TUNING is selected

Channel

CH 22

CC --

If this is not the case, select the contents line using the

Cable

Programme

Fine Tuning

Station name

Erase (-)

yellow key

and TUNING with the key

BBC 2

Store (+)

If the menu is not in English, refer to the INSTALLATION

chapter, page 10.

Access to the organiser (+)

Norm

TUN IN G

AV1

AV2

AV3

Select the Norm (-/+) line (yellow key).

Select the broadcasting standard :

Norm (-/+)

Decoder

PAL I (UK)

None

AV1

AV2

PAL/SECAM BG (Euro) : Western Europe (BG)

Channel

CH 22

CC --

FRANCE LL'

PAL BG+

: France and Luxembourg (LL’)

: Special standards (Switzerland)

: Eastern Europe, Middle Eadt (DKK’)

: United Kingdom, Ireland (I)

Cable

Programme

Fine Tuning

Station name

Erase (-)

BBC 2

SECAM DKK’

PAL I (UK)

Store (+)

Access to the organiser (+)

Decoder

This function allows you to access programmes using the PR –/+

keys (zapping).

Select Decoder line (yellow key).

Select one of the options :

Norm (-/+)

Decoder

PAL I (UK)

None

AV1

AV2

Channel

CH 22

CC --

Cable

Programme

Fine Tuning

Station name

Erase (-)

None

AV1

AV2

= no decoder

= Decoder connected to Euro-AV1 socket.

= Decoder connected to Euro-AV2 socket.

BBC 2

Store (+)

Access to the organiser (+)

Channel/Cable

If you do not know the channel numbers.

TUN IN G

AV1

AV2

AV3

Select the Search line (yellow key).

Start the search by pressing :

+ : for forward channel search

Norm (-/+)

Decoder

PAL I (UK)

None

AV1

AV2

Channel

CH 22

CC --

: for backward channel search.

Cable

Programme

Fine Tuning

Station name

Erase (-)

The cursor indicates the part of the range in which it is perfor-

ming the search.

BBC 2

Store (+)

Access to the organiser (+)

The channel numbers are displayed on

• Channel line when received via an aerial

• Cable line for cable networks.

Once a station has been received, the picture appears on the

screen. If the picture, corresponds to the station required, go to

the Programme line, otherwise continue the search, with (+).

TUN IN G

AV1

AV2

AV3

Norm (-/+)

Decoder

PAL I (UK)

None

AV1

AV2

Channel

CH 22

CC --

If you already know the channel numbers.

Cable

Programme

Fine Tuning

Station name

Erase (-)

BBC 2

Select the line

Store (+)

• Channel for TV channels (aerial) or

Access to the organiser (+)

• Cable for cable networks.

Enter the channel number (it must have 2 digits)

e.g. : for channel 6, enter 0 and then 6.

0/AV

Download from Www.Somanuals.com. All Manuals Search And Download.

television set

manual programming

Programme

Select the Programme line (yellow key).

Enter the station number.

TUN IN G

AV1

AV2

AV3

Norm (-/+)

Decoder

PAL I (UK)

None

AV1

AV2

Programme 1 to 9 :

Press the corresponding digit briefly (eg: 03, press 3).

Channel

CH 22

CC --

Cable

Programme

Fine Tuning

Station name

Erase (-)

BBC 2

Programme 10 to 99 (eg : 52) :

Briefly press 5 to display the tens :

Store (+)

Access to the organiser (+)

5 -

Briefly press 2 to display the units : 5 2

Optional :

To be used if the picture is not clear or for searching for

a specific source, for example, a video recorder channel

Fine Tuning

Channel

CH 22

CC --

Cable

Select Fine Tuning line (yellow key).

Programme

Fine Tuning

Station name

Erase (-)

BBC 2

+ : sharper picture contours or search higher in the range

Store (+)

Access to the organiser (+)

: softer picture contours or search lower in the range.

Station name

Select the Station name line (yellow key).

The station name can be written in 6 characters.

Hold down the button : the characters are displayed in ascending order.

TUN IN G

AV1

AV2

AV3

Norm (-/+)

Decoder

PAL I (UK)

None

AV1

AV2

Hold down the button : the characters are displayed in the

descending order.

When the required character appears, press these buttons to go

the next or previous character.

Channel

CH 22

CC --

Cable

Programme

Fine Tuning

Station name

Erase (-)

BBC 2

Store (+)

Access to the organiser (+)

To leave a space look for the blank character (between ? and A)

or press briefly

0/AV

Store / Erase

Press yellow key to select Erase (-) Store (+) line.

TUN IN G

AV1

AV2

AV3

Briefly press, your channel is stored in the memory.

If you wish to Erase, press

Norm (-/+)

Decoder

PAL I (UK)

None

AV1

AV2

Continue the search for a different station.

Search and store all the stations by repeating the above

procedure starting from Search, Channel or Cable.

Repeat the process for the next programme/station starting

from NORM.

Channel

CH 22

CC --

Cable

Programme

Fine Tuning

Station name

Erase (-)

BBC 2

Store (+)

Access to the organiser (+)

Access to the organiser

Programme Organiser

When all the channels or the new channel have been retrieved,

you can access the channels management menu.

BBC 1

BBC 2

Select the line Access to the organiser (yellow key)

The menu Programme Organiser appears.

Proceed as explained on page 8 to list the channels in the order

required by you and to give them a name if this

has not already been done.

To return to the TUNING menu

PR+, PR- Select a station

+, -, 0..9

Blue

Move this programme

press once on the key

Change the name

Erase this station

Yellow

To exit, press the (TV) key

To clear the menus

press twice on the key

Download from Www.Somanuals.com. All Manuals Search And Download.

Nous vous recommandons de découper cette vignette pour qu’un enfant ne puisse pas en prendre connaissance.

SI VOUS NE VOUS SOUVENEZ PLUS DE VOTRE CODE PERSONNEL

Appuyez sur la touche jaune pour sélectionner le ligne Sommaire du menu,

puis sur la touche (+) pour sélectionner VERROUILLAGE.

Appuyer sur la touche jaune pour sélectionner la ligne Entrer votre numéro de code.

Appuyez simultanément sur les touches

du téléviseur.

L’ancien code se trouve alors effacé et vous pouvez en entrer un nouveau.

Après le changement de code, il n’est pas nécessaire de reverrouiller les programmes qui étaient verrouillés.

✄

Wir empfehlen Ihnen, diesen Abschnitt auszuschneiden, damit er nicht von Kindern gelesen werden kann.

WENN SIE SICH NICHT MEHR AN IHRE PIN-NR ERINNERN

Kurzes Drücken der gelben Taste, die Titelzeile des Menüs wird aufgerufen,

anschließend mit der Taste (+) SPERRUNG wählen.

Drücken Sie die gelbe Taste, die Zeile Geben Sie Ihre PIN-Nr ein wird aufgerufen.

Drücken Sie gleichzeitig die entsprechende Taste

und

am Fernsehgerät.

Die frühere PIN-Nr ist nun gelöscht und Sie können einen neuen Code eingeben.

Nach dem Ändern der PIN-Nummer brauchen die vorher gesperrten Programme nicht nochmals gesperrt werden.

Vi consigliamo di staccare questo tagliando per evitare che i bambini ne prendano conoscenza.

SE NON RICORDATE PIÚ IL CODICE SEGRETO

Premere il tasto giallo per selezionare le riga Sommario del menu,

poi il tasto (+) per selezionare BLOCCO PROG.

Premere il tasto giallo per selezionare la riga Inserire il codice segreto.

Premere simultaneamente i tasti

del televisore.

Il codice precedente viene cancellato e potete quindi inserire un nuovo codice segreto.

Dopo aver cambiato il codice, non è necessario di ribloccare i programmi che erano bloccati.

✄

Recomendamos cortar este cupón para que los niños no tengan acceso al mismo.

SI SE OLVIDO EL CÓDIGO PERSONAL

Pulse la tecla amarilla para seleccionar la línea Índice del menú,

luego la tecla (+) para seleccionar BLOQUEO.

Pulse la tecla amarilla para seleccionar la línea Introducir el número del código.

Pulsar simultáneamente las teclas

del televisor.

El código antiguo se borra, pudiendose introducir otro nuevo.

Después de un cambio de código, no es necesario volver a proteger los programas que ya estaban protegidos.

We recommend you cut out this sticker to keep it hidden from the children.

IF YOU NO LONGER REMEMBER YOUR PERSONAL CODE

Press the yellow button to select the menu Contents line,

then the (+) button to select LOCK.

Press the yellow button to select the line Enter your PIN number.

Press simultaneously the

and

buttons on the TV.

The old code is then erased and you may enter a new one.

After changing code, it is not necessary to relock the programs which were already locked.

✄

Download from Www.Somanuals.com. All Manuals Search And Download.

Technics Speaker System SB SL101 User Manual
Toshiba TV DVD Combo 26LV67 User Manual
Toshiba Universal Remote 62CM9UA User Manual
Tripp Lite Network Cables N002 005 YW User Manual
True Manufacturing Company Refrigerator TCGR 50 User Manual
Uniden Cordless Telephone XS1415 1415+1 User Manual
Verona Cooktop CTG212FD User Manual
Vivitek Projector D86X User Manual
Wagner SprayTech Paint Sprayer 2309 518 User Manual
Weed Eater Lawn Mower Accessory 961140007 User Manual