2_DTH223_en 23/03/04 18:15 Page 1
Contents
Playing images (JPEG), and sounds
Connections and initial set up
(mp3,WMA) files ........................................................17
Precautions and information before connecting ......2
Setting up the remote control unit ............................2
Important information regarding the batteries..2
Connecting: DVD player +TV set................................3
Other Audio -Video connections ........................3
Sockets and cables ........................................................4
Audio sockets and cables (for sound)..................4
VIDEO socket and cable (for image)....................4
Front panel of the player..............................................5
Player display panel ......................................................6
Initial player set-up........................................................7
Using the remote control unit correctly ............7
Switch on your DVD player and your TV set ....7
Displays on your player (menus and banners) ..7
Remote control ............................................................8
Description of keys in DVD mode ......................8
Playing sound files (mp3 or WMA) ....................17
Lecture simultanée JPEG et mp3 ou WMA
(images et musique)................................................17
Playing image files (JPEG) ......................................18
Adjusting the speed of the image sequence ....18
Changing images......................................................18
Rotating an image....................................................18
Enlarging an image (zoom) and Pan and Scan
function......................................................................18
To stop the picture sequence and return to
player menu..............................................................18
To play DivX files ........................................................19
EN
EN
To play DivX files....................................................19
®
To rent (purchase) DivX VOD files ..................19
Concerning DivX files............................................19
Menus
Menus on your DVD player
(basic principles for use) ............................................20
Player menu ..............................................................20
Sub-menus ................................................................20
Functions within menus ........................................20
Play menu ....................................................................21
Start............................................................................21
Random play (CDs - mp3 - WMA) ....................21
Using the remote control unit to control
yourTV set orVCR ......................................................9
Controlling aVCR ....................................................9
Controlling a TV set ................................................9
Using the remote to Navigate through On-Screen
Menus..............................................................................9
Programming playback (Program Play)
(DVDs - CDs - mp3 - WMA) ..............................21
Automatic playback (AutoPlay)............................21
Introscan (CDs) ......................................................21
Lock menu ..................................................................22
Locking your player ................................................22
Unlocking you player..............................................22
Changing a code......................................................23
Rating limits..............................................................23
Setting a rating limits..............................................23
Discs without rating limits ........................................23
Display menu ..............................................................24
TV Image menu........................................................24
PAL or NTSC TV sets............................................25
Front Display menu ................................................25
Sound menu ................................................................26
Night Mode ..............................................................26
Virtual Surround......................................................26
Voice + ......................................................................26
Language menus..........................................................27
Playing a disc
Discs you can play........................................................10
Region code numbers of DVD discs..........................10
Loading and playing a disc..........................................11
Search Options............................................................12
Quick search of an image or a track..................12
Still picture and frame advance............................12
Slow motion (in Pause mode on an image)......12
Skipping a chapter or a track ..............................12
Playback options..........................................................12
Enlarging an image (zoom)....................................12
Scene Again™ ..........................................................12
Using the information banner ..................................13
Information banner with a DVD disc ................13
Information banner with aVCD, SVCD, DivX
discs............................................................................13
Further information
Information banner with an Audio CD disc ....13
Timer............................................................................14
Title (DVD) orTrack (CD,VCD)................................14
Chapter (DVDs) ..........................................................14
Screen fit (DVDs) ........................................................14
Play modes ..................................................................15
Troubleshooting guide ................................................28
Recommendations and information concerning discs....31
CD-R and CD-RW discs ......................................31
CD-R and CD-RW discs with mp3 format
“Sound” files ............................................................31
CD-R and CD-RW discs with JPEG format
“image” files..............................................................32
Video CD (VCD) discs..........................................32
Repeat playback of a scene between two
points A and B (DVD -VCD - SVCD) ..............15
Languages of sub-titles and dialogues (DVD) ..16
Sequence marking (DVDs)....................................16
PBC - Playback control menu (Video CDs) ....16
Camera angles (DVDs)..........................................16
SuperVideo CD (SVCD) discs ............................32
DVD-R and DVD-RW discs ................................32
DivX discs ..................................................................32
What codecs can your player read? ........................32
Caution ........................................................................33
Technical data..............................................................33
DVD copy protection
In accordance with the DVD standard, your DVD player is equipped with a Copy Protection system, which can be triggered
on and off by the DVD disc itself, in order to make any recording of the concerned DVD disc onto a videotape of very poor
picture quality, or even impossible.“This product incorporates copyright protection technology that is protected by method
claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
use only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.”
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 3
Connections and initial set up
The rear panel of your television set and your video player may be different from the ones illustrated here.
EN
EN
DTH 223 U
DTH 223 E
Television set
220 - 240V
50 - 60 Hz
DTH 223
Connecting: DVD player +TV set
Recommended Audio –Video connection
Connect a Scart-Peritel cable (not supplied) to the TV AUDIOVIDEO OUT (RGB) output
socket at the rear of your DVD player and to the AV1 input socket of your television set
(sometimes called AUX 1 or EXT 1).
Other Audio -Video connections
If there is no Scart-Peritel connector available on the television set, check whether there is
another Composite video to connect your player to by using the corresponding connector (see
page 4). In this case do not forget to also connect the Audio out socket (AUDIO OUT) to the
Audio in socket (AUDIO IN) on your TV set.
Note: for more information about signals, cables and Audio/Video sockets refer to page 4. For UK, please see
safety information regarding the mains plug at the end of this user manual, in the cover page.
Continue on page 5
3
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 4
Connections and initial set up
1
2
The back of your DVD player
3
Sockets and cables
There are several ways you can integrate your DVD player into its Audio-Video environment.The
simplest is found on page 3. It uses the Scart-Peritel cable that groups together an Audio analogue
connection for sound andVideo for RVB images.This type of connection ensures optimum image
quality. If you cannot use the Scart-Peritel connector, use the CompositeVideo and Audio
connectors.
Audio sockets and cables (for sound)
1 - Audio Out L / R
Analogue sound of a disc being played is permanently available on the two L
and R sockets on your player. If you do not use the recommended Scart
Peritel connection to your TV set (page 3) you must, in addition to the CVBS
video connection described on page 4, connect the L and R audio out sockets
on your DVD player to the L and R audio in sockets on your TV set (or
amplifier).
Note: audio sockets and cables are usually identified by a colour code (white for the
left channel and red for the right channel).
RCA sockets and
cables for analogue
L and R audio
signal.
2 - Coaxial out socket
The digital sound from a disc being played is permanently available on the
coaxial connector of your player. Use this connector when you connect a
decoder or a Dolby Digital amplifier or DTS.
Coaxial socket and
cable for digital
audio signal.
VIDEO socket and cable (for image)
3 - CompositeVideo Out socket (CVBS
)
The yellow video socket is also called composite video, or CVBS.The image
quality delivered by the video socket is the least good of all video
connections. Only use this socket if the Scart Peritel socket is already in use.
RCA socket and
cable for CVBS
Video signal, also
called Composite.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 5
Connections and initial set up
Front panel of the player
1
2
3
4
5
EN
EN
6
1
ON/STANDBY - Turns the player on or off.The indicator is green when the player is
operating and red when the player is turned off (stand by mode).
2
3
EJECT - To remove a disc.
STOP - Stops playing a disc.
NEXT - Plays the next chapter (DVD) or track (CD).
4
5
6
PLAY/PAUSE - Plays a disc.
PREV/video - Skips back to the beginning of the chapter (DVD) or of the track (CD) during
playback, or to the beginning of the previous chapter or track.
Continue on page 6
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 6
Connections and initial set up
Player display panel
7
8
9
10
11
12
13
14
15
7
DVD is lit up if a DVD is loaded in the player.
Playing a disc:Video CD (VCD),Audio CD (CD).
8
Playing Audio CD or MPEG files.
9
Replay the title (DVD) or track (CD,VCD) while playing.
Replay the entire disc (DVD, CD,VCD).
Replay between 2 points A and B (DVD,VCD).
Play MP3 or WMA files.
10
11
12
13
14
15
Forward play ( ), or pause on still frame ( ).
Elapsed time (hours, minutes, seconds) and chapter (DVD).
EJECT, LoaD: Information relating to loading a disc.
STOP: Disc in the player but play halted.
CurrentTitle (DVD) during the changing of a chapter or DVD.
DVD, CD, SVCD: the INFO key on the remote control allows the elapsed time to be displayed as well as the
chapter number or current track number.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 7
Connections and initial set up
Initial player set-up
Using the remote control unit correctly
When you use remote control, point the unit at the appliance you want to control (DVD player,
TV set or video recorder). Ensure that there is no obstacle between the remote control unit and
the appliance, otherwise the infrared signal carrying the remote control commands will be
blocked.To control your DVD player, ensure that the remote control unit is in DVD mode by
pressing once on the DVD key before using any other keys.
EN
EN
Switch on your DVD player and yourTV set
1. Turn on your TV set.
2. Set your DVD player remote control unit in DVD mode by pressing once on the DVD key.
3. Switch on your player by pressing the ON/STANDBY button on the front panel of the player.
4. The first time you turn on your player, it will ask you
to select a preferred language for the various displays
via the menu which appears on your TV screen. If this
menu is not displayed, on your TV screen select the
AV socket to which you connected your player.The
player menus as well as the dialogues and subtitles of
the DVDs will always be presented in the language
you’ve chosen if it is available on the discs played.
5. Choose a language using the
,
keys on the
remote control unit, then confirm by pressing OK.
The player menu is displayed, your player is ready to
play your discs. See page 11 or read the 2 following
pages before beginning to use your player.
Displays on your player (menus and banners)
•
Disc menus – Each DVD disc offers a menu, the layout and order of which depend on the
editor of the disc.The main menu of the disc is displayed on the screen when a DVD disc is
loaded and play begins.You can also display or remove the main menu of the disc at any time
by pressing the MENU key.
•
•
Player banners – while a disc is playing back you can display or remove banners using the
INFO key on the remote control unit.The banners appear in the form of a succession of
icons at the top of the screen.The number of icons varies according to context.
Player menus – your player has menus enabling you to use functions that are not accessible
using the remote control unit keys.The player menu is displayed when the player is not
playing a disc (in STOP mode).
Note: settings will only function if the corresponding function has been provided by the editor. For instance, if
you select the subtitle icon in the banner, subtitles will only appear if they actually exist on the disc. Check
the sleeve to see what subtitles are provided. If a menu or icon appears in “grey” it means that the function
is not available.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 8
Connections and initial set up
Remote control
The remote control unit supplied with your DVD player can also be used to control most recent
TV sets and video players made by THOMSON, Saba, Brandt, Ferguson and Telefunken.You thus
have three remote control units in one using to the three modes – DVD,TV andVCR – accessible
by pressing the three corresponding keys.This page describes the keys that enable you to control
your DVD player (in DVD mode).
Note: the functions described below depend on the discs and/or the files read.
For a description of theTV andVCR functions, see the following page.
Description of keys in DVD mode
Switches the DVD player on or off.
DVD
PR
Sets the remote control unit in DVD mode (by
pressing once), enabling you to control your DVD
player.
Skips forward or backward a chapter (DVD) or
track (CD).
RETURN
MENU
Returns to the previous menu.
Displays the DVD disc menu while a disc is being
played.
CLEAR
Removes the menu or banner showing on the TV
screen.
Audio - Displays or hides the dialogue language and s
format.
Subtitles - Displays or hides the subtitle language.
INFO
Displays the player information banner on the TV
screen while a disc is being played.
TITLE
(DVD) Displays a sub-menu on the disc (where
available on the disc).
Angles (DVD) – to access a choice of angles of an
image if available on the disc.
(JPEG) To rotate an image through 90°.
0 to 9
Keys used to enter information such as a chapter
or track number, or to make choices from menus.
PLAY MODE Direct access to play mode icon.
REV
REVERSE - Fast backward while a disc is being
played.
PLAY
FWD
Plays a disc.
FORWARD - Fast forward while a disc is being
played.
STOP
Pause during playback to display player menu.
PAUSE
Pause during playback (CD) or pause on an image
(DVD).
AGAIN
ZOOM
Skips backward – each press sends play backward
last seconds during DVD playback.
Enlarges the picture during playback, slow motion
or pause mode.
OPEN.CLOSE Ejects a disc from the player.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 9
Connections and initial set up
Using the remote control unit to control yourTV set orVCR
The remote control unit supplied with your DVD player can also be used to control most recent
TV sets and video players made by THOMSON (Saba, Brandt, Ferguson and Telefunken).This page
describes the keys that enable you to control your TV set orVCR providing they are equipped
with the same functions.
Controlling aVCR
VCR
Sets the remote control unit inVCR mode (by pressing once) and then enables you to control
yourVCR.
EN
EN
Note: colour keys LOCK, TIMER, INFO make it possible to use the programming functions on your VCR.
The cassette running control keys - PLAY, FWD, REV, PAUSE STOP and the RECORD key have the
same functions as the buttons on your VCR.
Controlling aTV set
TV
Sets the remote control unit in TV mode (by pressing once) and enables you then to control
your TV set.
Switches the TV set or theVCR on or off.
Volume control.
Switches sound off or on again.
PR
Switches channel or selects an AV socket.
Selects an AV socket.
AV
0 to 9
ZOOM
MENU
RETURN
CLEAR
GUIDE
INFO
Keys enter digital values or change channel.
Enlarges (zooms in on) the picture on some TV sets.
Displays the main menu of the TV set orVCR.
Returns to the previous menu.
Removes menu or other information displayed on the screen.
Displays TV programme guide - Displays the Naviclick page (if available) (VCR).
Displays information about the channel or running theVCR.
OPEN.CLOSE To eject a disk.
Note: colour keys enable one to use the teletext function on THOMSON TV sets.
Using the remote to Navigate through On-Screen Menus
No matter what on-screen display you’re using (the DVD player’s menu, the Info Display that
appears during playback, or a disc’s menu), you’ll use the same buttons on the remote control to
navigate through the on-screen display: the four arrow buttons and the OK button.
Use the the arrow buttons on the remote to move through on-screen menus in the direction of
the arrow button (to move right, press the right arrow button; to move left, press the left arrow
button, etc.).The arrow buttons are used to highlight an option. Once highlighted, press the OK
button to select the option that is highlighted.
To move:
up,
down,
right,
left.
OK key to validate.
Note : Use the arrow buttons to highlight on-screen options. Use the OK button to select an option that is
highlighted.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 10
Playing a disc
Discs you can play
• Digital video discs - 12 cm, single or double sided, single or dual layer.
DVDs are high density optical discs on which high quality picture and audio
are recorded by means of digital signals.
• DVD+/-R, DVD+/-RW - Most DVD-R and DVD+R (one recording only),
and DVD-RW and DVD+RW discs (rewritable). Recordings on DVD-R and
DVD-RW discs must be made inVideo DVD mode. Recordings on
DVD+RW discs must be made in accordance with the specifications for the
4.7 Gb capacity DVD+RW disc format. Compatibility is dependent on which
DVD writer, writer software and discs are used.
DVD+Rewritable
• Audio CDs - 12 cm audio CDs.
• CD-R, CD-RW - Most CD-R (one recording only) and CD-RW discs
(rewritable). Compatibility is dependent on which DVD writer, writer
software and discs are used.
•Video CD (VCD) - CD on which you can record up to 74 min. ofVHS-
quality video associated with still images, audio tracks and interactive menus.
• SuperVideo CD (SVCD) - Most S-VCD discs conform to the IEC 62107
standard.They can be used to record up to 70 minutes of digital sound and
video, with MPEG-2 standard video and MPEG-1 standard audio. S-VCD disc
compatibility is dependent on which MPEG coding software, disc design
software and disc writer software are used, and the discs themselves.
Note: Despite considerable progress made in providing compatibility with as many different
discs as possible, reading of discs not conforming to Audio CD,Video CD and Super Video CD
(S-VCD) disc standards cannot be guaranteed).
• JPEG files - Discs containing images in JPEG format. Compatibility is
dependent on the disc creation software used and file sizes, stated in
millions of pixels. Certain JPEG files such as Progressive JPEG files cannot be
read by this equipment.
• MP3 files - Discs containing sound files in MP3 format.
• WMA files - Discs containing sound files in WMA format.
• DivX files - Discs containing audio and image files in the certified DivX
format.
Note: Before loading a disc in the player, check that it is compatible.Also, refer to
pages 31 and 32 for our recommendations concerning discs and formats.
Region code numbers of DVD discs
Discs that can be played on your player are ones marked with area code 2
(Europe, Middle East, Republic of South Africa and Japan). Ensure that any
DVD disc you want to load bears area code 2.The ALL logo printed on
some discs means that the disc can be played on any DVD player.
Note: for your information: the other areas are: - 1: USA, Canada - 3: Southeast Asia,
Taiwan - 4: Central America, South America,Australia, Mexico, New Zealand - 5:
Russian federation,Africa (except Egypt and Rep. of South Africa), India, Pakistan - 6:
China.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 11
Playing a disc
Loading and playing a disc
Switch on your TV set and DVD player.
Note: if other devices are connected to your television set and/or DVD player, it is generally preferable to turn
off the devices that are not in use.
1. If the player menu is not displayed on TV screen, select the TV set Scart Peritel socket to
which you connected your player (see page 3).
EN
EN
Note: this menu is the main menu of your player. It is displayed
on your television screen as soon as the player is turned on if
the player is connected to the television set via the AV1
connector.After several minutes this menu is replaced by a
moving DVD logo (screen saver).To redisplay the main menu of
your player press a key
detailed on page 20.
.The functions of this menu are
2. Gently insert a disc in your player’s slot, ensuring that it is completely horizontal. It is normal
for you to feel slight resistance.When approximately half of the disc is inserted, the disc is
drawn automatically inside the player.The disc label must face upwards (double sided discs
have a small label on both sides around the centre).
Note : if you experience any problems when inserting a disc, switch off your player and then switch it on
again; then reinsert the disc.
12 cm !!
8 cm
3. According to the type of disc one of three things may now happen:
• disc playback starts,
• the disc menu appears, asking you, for instance, to choose the language of dialogues,
subtitles, etc., or to start playing the disc. Make your choice using the four navigation keys
,
,
,
and validate by pressing OK.
,
• The main player menu appears. Using the navigation keys
Playback then starts.
,
, select Play and press OK.
Note: if you have selected a restriction level and/or if you have selected Password Required for the
UnratedTitles function, your player will then ask you to enter your password.To de-activate these
functions see page 23.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 12
Playing a disc
Search Options
Note: the functions described below depend on the discs and/or the files read.
Quick search of an image or a track
In Play mode, start the Forward or Reverse fast motion playback using the FWD (forward) or
REV (reverse) keys. Press once or several times for higher speeds.To resume normal playback
press PLAY.
Still picture and frame advance
During playback press PAUSE once to freeze the image. Press PAUSE again to go into “frame”
mode (the PAUSE icon is then replaced by the FRAME icon on the TV screen). Press FWD or
REV to view images one after the other forward or backward.To resume normal playback press
PLAY.
Note: If the player is left in pause mode for a long period with a DVD or a VCD, the home screen comes on. Press
any key on the remote control unit to resume display of the image transmitted from the disc.
Slow motion (in Pause mode on an image)
During playback press PAUSE once to freeze the image. Press FWD or REV to view images in
slow motion forward or backward. Press once or several times for higher speeds.To resume
normal playback press PLAY.
Skipping a chapter or a track
During playback you can access the following or previous chapter (or track) by pressing PR
and/or PR
on the remote control unit.
Note: Forward or backward skips can also be made by using the PREV and NEXT keys on the player.
Playback options
Enlarging an image (zoom)
During playback press the ZOOM. key once or repeatedly. Move the zoomed image around using
,
,
,
to view a particular spot. If this does not work, try again after pressing PAUSE.To
resume normal playback press the key several times to return to the original format.
Scene Again™
During playback press AGAIN on the remote control unit. Each touch of the key steps back few
seconds of play.
Note: the play functions depend on the type of disc being played.With certain discs some functions are not
available.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 13
Playing a disc
Using the information banner
The information banner appears at the top of the screen when you press INFO on the remote
control unit while a disc is being played. Use the and keys to select the various icons.
When an icon is activated (highlighted), follow the instructions on the screen and use the
keys to browse for options.
or
You can only access information banners when a disc is being played.The options on an information
banner are only available if the disc has been designed to incorporate those options. If an icon is
inactive (does not light up) it means that the function is not available for the disc being played.
EN
EN
This symbol appears on the screen when a command is incorrect (prohibited, function
not available).To remove the information banner, press the INFO key on the remote
control unit.
Information banner with a DVD disc
To reframe the DVD image according to the
screen format of yourTV (page 14).
To choose the
subtitle language
(whether available
on the disc)
To memorise and use the
markers (page 16).
To change the
viewing angle
(page 16).
Chapter 2 currently being
played (page 14).
(page 16).
Title 1 currently being
To choose the dialogue
Play modes: to select a play mode
(Standard, Program) (page 15), and
to repeat play of a title, a chapter,
a scene (page 15).
played (page 14). language and audio format
(whether available on the
disc) (page 16).
Information banner with aVCD, SVCD, DivX discs
To select the PBC function (whether
available on the disc) (page 16).
To choose the subtitle
language (whether
available on the disc)
(page 16).
Title currently being
played (page 14).
To select the audio channel
Stereo, Left, Right.
Play modes: to select a play mode
To choose the dialogue language DIVX: depending
(Standard) (page 15), to repeat the
and audio format (whether
on the disc
playback of a disc or a track (page 15).
available on the disc) (page 16).
Information banner with an Audio CD disc
Track 1 currently being
played (page 14).
To memorise and use the markers (page 16).
Play modes: to select a play mode (Standard, Random) (page 15),
to operate repeat play of a disc or a music track (page 15) and
Introscan to play the first 10 seconds of each track (page 15).
13
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 14
Playing a disc
Arrow
To access the information banner (only with DVD,VCD, SVCD
or CD Audio discs), press INFO on your remote control unit
during playback. Use arrow keys and on the remote
control unit to select the various icons.When an icon is
selected it is highlighted.The line under the banner is an
information and instruction line.When small arrows appear
above and below the selected icon these point to other
OK
up
Arrow
left
Arrow
right
Arrow
down
possible options. Now use the
through the various options.
and
keys to scroll
INFO
Timer
This icon shows the time elapsed since the start of playback.The time
displayed is that of the title of a DVD disc (or of the track on a CD disc)
during playback.The timer provides direct access to a scene or a musical
passage by keying in the starting time.
Select the time elapsed icon and use the numbered keys on the remote
control unit to access the place from which you want to play back. Use
two digits for each field. For instance, if you enter 01:35:12, you will
access the sequence beginning 1 hour, 35 minutes and 12 seconds after
the start of the title.
Note: For audio CDs and VCDs, the timer refers to the track currently being played.
Title (DVD) orTrack (CD,VCD)
Most DVD discs only contain one title. However some discs may contain
several titles each of which is itself divided into several chapters.
To choose a title, select icon T, then use the
or
keys to scroll the
titles or tracks. Use the numbered keys on the remote control unit to
access a particular title or track.
Chapter (DVDs)
Most DVD discs contain several chapters (similar to the tracks of audio
CDs).
To choose a chapter, select icon C, then use the
or
keys to scroll
chapters. Use the numbered keys on the remote control unit to access a
particular chapter.
Note: follow your progress below the banner.
Screen fit (DVDs)
You can change the size of the image on the TV screen during playback of a
DVD disc.
To change the size, select the Image Format icon, then use the
keys.
or
14
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 15
Playing a disc
Play modes
Your player has several play modes according to the type of disc played:
Standard play which follows the order of the tracks, titles and chapters on the
discs; Random play which plays the sequences or music tracks in a random
order; Programmed play which allows you to choose the sequences or music
tracks and the order in which they are to be played;Automatic play enables a
disk to begin playing as soon as it is inserted in the player.The play mode icon
can be accessed from the information banner when a CD orVCD disc is in
play.
Standard play
Random play
IntroScan
EN
EN
The IntroScan function enables you to listen to the first few seconds of each
track of an audio CD.
Note: when the first few seconds of all tracks have been played the player goes into
Stop.To stop IntroScan press PLAY to continue play and listen to the whole track, or
press STOP.
While a disc is being played, press PLAY MODE (the information banner is
displayed), the play mode icon is already selected. Press PLAY MODE again
to select play mode or use the
mode selected, as does the text area in the information banner:
/
keys.The icon changes according to the
DVD discs: Standard – A-B Repeat - Chapter Repeat – Title repeat (if
available on disc being played) - Program.
Audio CD discs: Standard - IntroScan - Track Repeat - Disc Repeat -
Random - Program.
VCD discs: Standard.
Discs containing mp3/WMA music files: Standard – Disc Repeat -
Group Repeat – Track Repeat – Random - Program. See page 17.
JPEG discs: See page 18.
mp3 – JPEG discs: See page 17.
Note: the standard mode is reactivated for any new disc loaded in the player.The
programme mode only works if you have keyed in a programme (see page 21).
Repeat playback of a scene between two points A and B
(DVD -VCD - SVCD)
A-B Repeat mode allows you to select exactly the sequence you wish to
repeat.
1. Select the repeat playback function using the
or
keys.
A-B Repeat appears under the banner.
Repeat playback
functions
2. Press OK to memorise the beginning of the scene you want to repeat
(point A).
3. Wait a few seconds before pressing OK again to mark the end of the
scene to be repeated (point B). A-B Repeat appears to tell you that the
repeat playback of the sequence is starting.To stop repeat, select another
mode using the
or
keys, or by pressing PLAY MODE or STOP.
Note: Repeat functions remain active until you turn them off, open the disc tray or
turn off the power. Repeat play only works with discs that show the elapsed time on
the display.This may not work correctly with certain discs (Video CDs in PBC mode).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 16
Playing a disc
Languages of sub-titles and dialogues (DVD)
1. While a disc is in play press the green key for sub-titles or red key
for dialogues (the information banner is displayed), the corresponding
icon is already selected.
Selecting the
language of
subtitles
2. If available on the disc, select the language of sub-titles or dialogues using
the same red or green keys.The name of the selected language appears
under the banner.
Note: selecting the language of subtitles only involves the disc being played. If you
remove the disc or if you switch off the player your selection will be cancelled. In this
case the default language, chosen when your player was first installed, will be
reactivated. If the preferred language is not available on the DVD disc the preferred
language of the disc (default language) will be selected automatically.With some
discs you can only access the dialogue or sub-title languages through the menu
provided on the disc.
Selecting the
language of
dialogues
Sequence marking (DVDs)
This function enables you to mark sequences on a disc so that you can access
them easily even if you switch you player off and on again (without having
ejected the disc).
Sequence marking
You can mark up to 6 scenes per disc.
1. While a disc is being played, press INFO to display the information
banner.
2. Press
until the marking icon is highlighted.
3. Press OK to display the marking banner.
Reading or deleting
a marker
• To find a sequence, select the half disc and press OK. The half disc
symbol is replaced by an arrow and a dustbin.The timer shows the
place marked.
• To play a scene with a marker, select the arrow and press OK.
Inserting a marker
• To delete a marker, select the dustbin and press OK.
PBC - Playback control menu (Video CDs)
This function enables you to make interactive selections of some scenes or
information through an on-screen menu. Moreover high resolution scenes can
be viewed if they are included on the disc. During playback press INFO (the
Selecting a play
mode
information banner appears). Press
or
to select the PBC icon. Uses the
or key to see other screens or deactivate the functions on offer.
Camera angles (DVDs)
A few DVD discs contain scenes shot from various different angles. If a disc
being played back offers different camera angles the icon in the banner will
show the number of the angle on the screen.With the disc in playback, press
on the remote control unit and choose the angle using the same key or
Changing camera
angles
the
or
keys .
Note: if the scene is only recorded in one angle the invalid command symbol
for a moment.
appears
16
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 17
Playing a disc
Playing images (JPEG), and sounds (mp3,WMA) files
Your player can play JPEG files with a resolution of up to five million pixels. However beyond
400,000 pixels there is no perceptible improvement in the quality of pictures displayed on your
TV screen.
mp3 and WMA are compressed audio file formats that make it possible to store a large quantity
of sound tracks on a disc. Files can be grouped in folders (albums) in the same way as files and
folders in your computer.A folder can thus contain other folders.WMA (Windows Media Audio)
TM
was developed by Microsoft .
EN
EN
Playing sound files (mp3 or WMA)
1. Load a disc and begin play.The list of files is displayed.The reader reads the contents of the
disc, then displays a contents menu.
2. Select a folder using the
or
keys on the remote control unit and press OK.The list of
files contained in the folder is displayed.
3. Select a file using the and
,
,
keys on the remote control unit and press PLAY.
Playback of files begins with the file selected and continues with the following files.Where
there are sub-folders in the folder, these are also played. Playback then moves to the next
folder located at the same level in the tree diagram as the folder containing the first file you
selected.
4. Stop playback using the STOP key.
Simultaneous JPEG and mp3 or WMA play (images and sound)
Your player enables you to play images and sounds on a same disc simultaneously.
1. When a disc is loaded and the disc menu is displayed
on the screen, use the
,
,
keys and OK
,
to select (and / or open a folder), and then to select
an mp3 sound file.The name of the selected piece
appears in the “Current Selection” area of the
screen ( ).
2. Press
3. Use the
.
(once or twice) to return to the disc menu
,
,
keys and OK to select (and
,
/or open a folder), and then to select a JPEG image
file.The name of the selected photograph appears
“Current Selection” area of the screen ( ).
4. To start play press PLAY.
Note: cancel a selection by pressing CLEAR. If playback of
an audio file ends before the end of the sequence of pictures,
it will resume at the start of the folder containing the chosen
audio file until the end of the sequence of pictures.
During simultaneous play, only the picture can be changed by
using the PR
or PR
keys.
You can adjust the speed of the slide show using the
keys.
or
17
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 18
Playing a disc
Playing image files (JPEG)
1. Load a disc and begin play.The list of folders (and / or photographs) is displayed.
2. Select a folder using the
or
keys on the remote control unit and press OK.The list of
files contained in the folder is displayed.
3. Select a file using the and
,
,
keys on the remote control unit and press PLAY.
The picture sequence begins.The information banner showing both Sound (mp3) and image
(JPEG files appears.After a few seconds the first image selected is displayed and the banner
disappears.To recall the banner press INFO.
Adjusting the speed of the image sequence
Display the banner using the INFO key, then use
or
to select one of three
speeds.This adjustment does not alter the display time between images but only the
length of time each image is displayed.
Changing images
During the picture sequence change images using the PR
or PR
keys on the remote
control unit.According to the type of image (Ko or Mo) the change may take several seconds.
Rotating an image
If an image is displayed sideways, you can rotate it through 90° using the
control unit.
key on the remote
Enlarging an image (zoom) and Pan and Scan function
To view a detail press ZOOM once or several times and use the
,
,
and
. keys. Return
to normal size picture by pressing ZOOM several times or by pressing PLAY to resume the
picture sequence.
To stop the picture sequence and return to player menu
Press STOP or press MENU several times
18
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 19
Playing a disc
To play DivX files
®
®
®
Your player is an Official DivX Certified™ product that Plays DivX 5, DivX 4, DivX 3, and
®
DivX VOD video content, in compliance with DivX Certified™ technical requirements.
The correct playing of DivX in your player, depends on the preparation and production of the
audio and video files, the codecs used, the type of recording equipment employed and the
parameters of your computer. It is therefore possible that you cannot play a DivX file or that part
or all of it is defective. It is also sometimes happens that you can play the images (video) but not
the sound (audio).To guarantee playback of DivX files the audio must be mp3 format. DivX
Certified devices can play back any interleaved mp3 audio at any bitrate, both CBR andVBR.The
audio must be sampled at standard frequencies, such as 32 khz, 44.1khz, and 48khz, and must
conform to the AVI file specification.Apart from mp3, the audio formats recognised by your player
are MPEG layer 1/2,AC3, DTS, PCM. Formats such as AAC and OggVorbis are not supported by
this player.
EN
EN
To play DivX files
1. Put in a disc and start the player.The player analyses
the contents of the disk and then displays a context
menu.
2. Select the DivX file that you wish to play with the
or
keys on the remote control and press OK
to select it.
Note: to de-select the choice press the CLEAR key on the
remote control or select another title and confirm it using the
OK key.
3. Press PLAY to begin playing it.
®
To rent (purchase) DivX VOD files
DivXVOD files are comparable to DVD video rental discs and permit a video film to be viewed.
The difference lies in the access to the media. DivXVOD files are downloaded after paying a
rental from certain commercial Internet sites. In order to permit the downloading ofVOD you
need to input on the purchase form of the site, the recording number of your DVD player.
To find the recording number of your player, follow the instructions below.
1. With a disc in the tray but not playin, select Play Mode from the player menu lecteur.
2. In the Play Mode menu, select DivX.The recording number is displayed on the screen of
the television set.
3. Write down thisVOD 8 character recording number, in order to complete the form on the
®
web site where you purchase your DivX VOD files.
Note: If you cannot play a DivX VOD file, recorded on a CD-R disc after downloading, it is possible that the
rental period allocated during purchasing from the web site has expired. It may also be that the recorded file
is incompatible with your player because of different versions or incorrect download parameters.The
parameters used during the copying to CD-R may also be a cause. Since it is not possible here to supply all
®
the information, parameters and advice relating to the use of DivX VOD files, we reccomend that you visit a
Concerning DivX files
You can find DivX files for download as well as generating them your self from your own content.
In the same way as mp3 files are used for audio, DivX and mpeg4 can be used for video. Files can
be recorded from your computer on to a CD-R or RW disc, which, owing to the much higher
compression than that used for DVDs can contain a complete movie.
The DivX, XviD and RV9 formats are all file formats using the same type of compression known
as MPEG-4.Though these formats all utilise a different codec.
A note on copying: before making use of DivX or mpeg4 files, please be sure of their origin and that you
have legally purchased or rented the content. Pirate copying is illegal and may result in sanctions. Private
copies of your own material for your own use may be legal in some countries. Make sure you are aware of
applicable laws.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 20
Menus
Menus on your DVD player (basic principles for use)
The functions of your DVD player are not all accessible directly through the remote control or
front panel keys.A certain number of functions are accessible through menus that you can display
or remove as you wish.These menus are used as follows.
Player menu
The player menu appears when no disc is being played.
When a disc is being played, press STOP to stop play.
The player menu then appears. Use navigation keys
on the remote control unit to highlight the
desired function.Then press OK to validate your
,
,
selection and start the function or access the next menu.
The player menu appears when the player
is in STOP mode.
Sub-menus
Sub-menus are indicated by an arrow on the right, telling
you that the line shown is not the name of a function but
that of another menu.To access it, highlight the name of
the sub-menu and press OK on the remote control unit.
The sub-menu appears to the right of the previous menu.
The Sound menu is an example of a sub-menu.When
the Sound line is highlighted, press OK (the functions of
the sound menu appear in another menu).
The Sound menu is an example of a
sub-menu.The arrows point to other
available functions
Functions within menus
Lines without arrows are functions that can be accessed
directly by validating with the OK key.These functions
can be used in two ways:
• The function starts working after validation with the
OK key.
The Resume Play function is an example.When Resume
play is highlighted, press OK (replay begins and the menu
disappears).
• After validation with OK the function offers two
choices, usually On and Off.
The Virtual Surround function is an example.When
Virtual Surround is highlighted press OK to change the
setting from Off to On and vice-versa.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 21
Menus
Play menu
Your player has several Play modes: Standard play which
follows the order of the tracks, titles and chapters on the
discs; Random play which plays the sequences or music
tracks in a random order; Programmed play which allows
you to choose the sequences or music tracks and the
order in which they are to be played;Automatic play
enables a disk to begin playing as soon as it is inserted in
the player.The available function differ according to the
disc loaded in the player.
EN
EN
Start
The default play mode of your DVD player is the standard play, which follows the order of tracks,
titles and chapters on the disc, as they were installed at the time of manufacture, beginning with
track or chapter no. 1.
Random play (CDs - mp3 - WMA)
Random play mode plays the sequences or music tracks in a random order.
1. If a disc is playing, press STOP to stop play.
2. Press
to highlight Play Mode, and press OK. Press
press OK.
to highlight Random play, then
3. To stop random play, press STOP twice.To Resume Play press PLAY.
Programming playback (Program Play) (DVDs - CDs - mp3 - WMA)
To program the playing of a disc, you must create your playback list.The player menu must be
displayed. If it is not displayed press STOP. Select Play Mode and validate by pressing OK. Select
Program Play and validate with OK. Choose the tacks you want to play usint the
and
keys, then validate with OK.To cancel a programme press CLEAR. Start the programmed play by
pressing the PLAY key on the remote control.
Automatic playback (AutoPlay)
You can adjust your player so that it plays a disc as soon as it is inserted.The player menu must
be displayed. If it is not displayed press STOP. Select Play Mode and validate with OK. Highlight
AutoPlay using the
key and validate with OK (On appears beside the AutoPlay menu).To
go from automatic play to stop, press OK again when AutoPlay is highlighted.
Note:Automatic play cannot be used with mp3 discs.
Introscan (CDs)
Select Introscan and press OK to listen to the first seconds of each music track on an Audio
CD.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 22
Menus
Lock menu
Your player makes it possible to set ratings limits to playing discs and to lock playback for discs
that contain information or scenes that exceed the ratings limit you have set.This function allows
you, for instance, to control the type of matter a child can watch.A padlock in the Parental
Control menu shows whether the player is locked or unlocked.
Locked:You must enter a password (code) in order to play discs that exceed the ratings
limit you have set.When the player is locked nobody can access the lock menu without
entering the code.
Unlocked: No code is needed to play discs. Even if you have set a ratings limit discs will
not be blocked while the player is unlocked.
Locking your player
1. If a disc is being played, press STOP (the player menu
appears).
2. Press
to highlight Parental Control and press OK.
Note: the first time you access the Parental Control menu
your player will ask you to enter a code.
3. Lock is highlighted, press OK on the remote control
unit.
4. Press the
key to select On and confirm it with the OK key (the password entry screen is
displayed).
5. Using the numbered keys on the remote control unit enter the code (4 digit number) and
press OK.Another screen appears asking you to confirm the code. Key in the same code
number and press OK (if necessary, press
to return to the previous menu).
Note: Once the player is locked you will have to key in the code each time you want to access the
Parental Control menu.
The player is supplied without any ratings limit setting. If you want to prohibit playback of certain discs you
will have to set a ratings limit (see following page for instructions).
Unlocking you player
1. If a disc is being played, press STOP (the player menu appears).
2. Press
to highlight Parental Control and press OK.
3. Using the numbered keys on the remote control unit, key in the 4 digit number of your code
and press OK.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 23
Menus
Changing a code
1. If a disc is being played, press STOP (the player menu appears).
2. Press
to highlight Parental Control and press OK (if requested to do so key in your
code; the Parental Control menu appears).
3. Press the
key to highlight Password and press
OK (a screen for entering the new code appears).
4. Using the numbered keys on the remote control unit,
key in the 4 digit number you have chosen as your
new code and press OK.You will then be asked to
confirm the new code. Key in the same password
EN
EN
number and press OK (if necessary, press
to
return to the previous menu).
Ratings limits
Your player provides ratings limits on a scale of 1 to 8.The Ratings limit function does not work
if the disc being played does not have a rating limit. In Europe ratings limits are as yet uncommon
on DVD discs on sale.
Setting a rating limits
1. If a disc is being played, press STOP (the player menu appears).
2. Press
to highlight Parental Control and press OK (if requested to do so key in your
code; the Parental Control menu appears).
3. Press
to highlight Rating limits and press OK.
or to move the setting bar to the desired
4. Use
level.
5. Press OK.
6. To return to the player menu, press
until the
menu is displayed on the screen.
Discs without rating limits
We often feel that some DVD discs ought to have a ratings limit. Unfortunately few discs in
Europe have one.You can however restrict viewing of such discs by means of the UnratedTitles
function by ticking the Password Required, option and then locking the player as described on
page 20.When this is done the password will be requested before playing any DVD disc, including
those that would not normally need a restriction.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 24
Menus
Display menu
The Display menu provides you with settings to adapt the picture format and TV standard
(PAL/NTSC) to that of your TV set.You can also adjust the brightness of the player’s display panel
and activate the Progressive Scan function.
TV Image menu
The TV Image menu allows you to set the image format (4x3, 16x9, etc.) of films according to
the format of your TV screen.
1. If a disc is being played, press STOP ( the player menu appears).
2. Press
options).
to highlight Display and press OK (The Display menu appears giving a choice of
3. TV Image is already highlighted; press OK (the
settings of the image format are shown).
4. Use the
or
key to highlight one of the three
formats described below, then press OK.
• 4 x 3 Standard – Select this setting if you want to the
film to fill the whole of the screen. In this case the left
and right edges of the image will not be visible.
4 x 3 Standard
• 4 x 3 Letterbox – Select this setting if you want to
watch films in their original format (height/width ratio).
You will then view the whole image, but it may fill a
smaller area of your screen.The film might appear
between black bars at the top and bottom of the
screen.
4 x 3 Letterbox
• 16 x 9 widescreen – Select this setting if your DVD
player is connected to a 16x9 TV set. If you select this
setting for a TV set with a different screen size, the
images may appear deformed due to vertical
compression of the image.When a DVD disc with a 4x3
image format is played vertical black bands appear to the
left and right of the image.
16 x 9 widescreen
24
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 25
Menus
PAL or NTSCTV sets
If the picture on the DVD being played appear in black and white on your TV screen, the standard
of the video signals transmitted to your TV is incorrect. Change the video signal from PAL to
NTSC or vice versa.
Select PAL/NTSC then with the OK key choose PAL or NTSC.
PAL is the name of the colour coding system used in most European countries.
NTSC is the name of the colour coding system used in the United States and some other countries.
EN
EN
Front Display menu
Depending on the brightness of the room where you’ve installed your player, select one of the 4
settings to adapt the brightness of the display panel to suit its environment.
1. If a disc is being played, press STOP (the player menu appears).
2. Press
options).
to highlight Display and press OK (The Display menu appears giving a choice of
3. Press
to highlight Front Display and press OK (The Front Display menu appears giving
a choice of options).
4. Use keys or to highlight one of the four available options and press OK to validate
your choice.
•
•
•
•
Dim for Movies (dimmed lighting during replay of a disc),
Off for Movies (no display during replay of a disc),
Always Bright,
Always Dim.
5. To return to the player menu, press
until the menu is displayed on the screen.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 26
Menus
Sound menu
The Sound menu provides you with settings so you can adapt your player to the devices
connected. It also enables you to access specific functions.
Night Mode
This function is designed for night-time listening to avoid disturbing your neighbours.The player
then adjusts the differences in sound levels through dynamic compression. It then becomes easier
to hear the soft sounds while the louder sounds are dampened.
1. In the player menu (with the player running, but no disc in play), highlight the Sound function
and press OK on the remote control unit (the Sound menu appears).
2. Night Mode is already highlighted, press the OK button on the remote control or use the
button to display the parameters screen.
3. Select Moderate, Quiet or Off with the
or
button and confirm with OK.
Note: the performance of this function depends on the appliances connected to your player and on the
sound format of the disc being played.
Virtual Surround
This function enables you to simulate, on the L and R audio channels of your TV set (or stereo
amplifier), the multi-channel sound effects of a Dolby or DTS film.
1. In the player menu (with the player running, but no disc in play), highlight the Sound function
and press OK on the remote control unit (the Sound menu appears).
2. Press
to highlight Virtual Surround and press OK on the remote control unit to Start
or Stop virtual surround.
Voice +
This function enables you to increase the sound volume of the central audio channel.
1. In the player menu (with the player running, but no disc in play), highlight the Sound function
and press OK on the remote control unit (the Sound menu appears).
2. Press
to highlight Voice + and press OK on the remote control unit.
or key and confirm with OK.
3. Select On with the
DTS - is a digital sound compression technique developed by Digital Theater Sound Systems for digital audio
multichannel signals.“DTS” and “DTS Digital Out” are registered trademarks of Digital Theater Systems inc.
Dolby Digital is a sound compression technique developed by Dolby for multi-channel digital audio signals.
The Dolby Digital system enables any audio channel configuration, from a stereo sound (2 channels) up to
the digital “surround” sound 5.1.
«Dolby Digital» and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
Copyright 1992 Dolby Laboratories Inc.All rights reserved.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 27
Menus
Language menus
Your player gives you a selection of languages to choose from.You can change the language of the
player menus, the language of the disc menus, the language of the dialogues and that of the
subtitles. In the menu, choose your preferred language for dialogues and subtitles. If it is available
on the DVD you will be playing, it will be selected automatically.The default language is the one
which is selected in the main menu. During playback, you can display or remove the subtitles and
change the language of the subtitles using the banners.
The Languages menu enables you to set preferred language options for:
EN
EN
•
•
•
•
player Menus,
disc Menus,
Audio dialogues,
Subtitles.
The method of selecting a language is the same for all Language sub-menus.
1. In the player menu (with the player running, but no
disc in play), highlight the Languages function and
press OK on the remote control unit (the
Languages menu appears).
2. Press
or
to highlight the desired setting, and
press OK on the remote control unit (a screen giving
the list of available languages appears).
3. Press
or
to select a language, and press OK
on the remote control unit to validate.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 28
Further information
Troubleshooting guide
You will be able to solve most problems involving your player by referring to the troubleshooting
guide below.
Note: if you encounter difficulties, you can contact our Help-line by dialling the following number:
You can contactTHOMSON by dialling: 0871 712 1312
(For Great-Britain, all calls will be charged 0,10£ / mn)
The player does not work at all
• Switch the player off and remove the plug from the mains socket.Wait for two minutes,
then plug it in again.
The player does not switch on
• Check the connections to the mains supply. Is the mains socket live? Check this by
plugging in a table lamp. If necessary, check the plug fuse and the fuse-box.
The player switches itself off automatically
• The DVD player switches off automatically after 30 minutes if it is not running.To switch
it on again, press the ON/STANDBY button on the front panel of the player.
The disc does not run
• In the case of single-sided discs, the disc label must face upwards.
• Check the type of disc you want to play. Check that it is one in the list given on page 10,
or that the format is one that is accepted by the player.
• The DVD player and discs are area coded. If the area code is different, the disc will not be
recognised by the player.The code number for your area is 2.
Play starts, then stops immediately
• Is the disc clean or damaged (is it scratched or marked)?
• If the disc (or the player) has been stored in a cold atmosphere before being installed in a
warmer room, condensation may have formed on the colder parts and interfered with the
running. Immediately unplug the player and wait for the condensation to evaporate
naturally.
The disc does not begin to play
• The level of the ratings limit on the disc may be in excess of the limit you set in the
Rating Limits menu. Unlock the player and / or change the ratings limit setting in the menus.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 29
Further information
There is no picture
• Select the correct In socket on your TV set.
• Important - If you don’t have a Progressive Scan TV or you don’t have the DVD player
connected to the correct Input Jacks, and you activate Progressive Scan in the DVD
player you won’t see a picture!
Don’t panic—try the following: first, press the PREV/video button on the front of the
DVD player (it will go to the next video output option, which is an interlace output so a
picture should appear on the TV screen). If that doesn’t work, press and hold PREV/video
button on the front of the DVD player for 3 seconds. Now, press the PREV/video button
again (it will go to the next video output option, which is an interlace output so a picture
should appear on the TV screen).As a last resort, you can reset the DVD player to the
factory default settings.
EN
EN
There is no sound, or it can hardly be heard
• Ensure that the plugs of the various cables are securely fitted into the sockets.
• If you connect an appliance (such as an amplifier) that includes a DTS or Dolby Digital
decoder, check that the input parameters of the appliance are correctly defined.
• According to the type of connection, select the appropriate setting in the sound menu of
your player and tick the DTS or Dolby Digital options.
The remote control unit does not work
• Did you press the key corresponding to the appliance to be controlled (DVD,VCR,TV)? Is
the appliance to be controlled manufactured by a brand other than one in the Thomson
group (Thomson, Brandt, Ferguson, Saba,Telefunken)?
• Point the remote control unit toward the front of the player.The maximum distance from
which it can be used is 8 metres. Ensure that there is no obstacle (object, animal) between
the remote control unit and the player.
• Remove batteries and hold down one or more keys for several minutes to drain the
microprocessor inside the remote to reset it. Reinstall batteries and try remote again.
• The batteries are fully discharged and must be replaced.When you insert the replacement
batteries, ensure you align their positive and negative polarities correctly (page 2).
The invalid icon appears on the screen
• Some functions are not accessible because they depend on the disc playing.
The language of subtitles or dialogues is not the one you selected at the time
of the initial setup
• When the language of subtitles or dialogues is not available on the disc, a default language
is selected automatically.You can select the subtitles or dialogue language through the
information banner (INFO key) or the language selection menu on the player.
The menu language is not the one you wanted
• In STOP mode select the Languages menu on the DVD player, then the Player Menu
function. Select a language from among those available, OK.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 30
Further information
If you forget your code
• Ensure that there is no disc in the player. Display the player menu on the television screen.
Now press the STOP button on your player and hold the CLEAR key on the remote
control unit down for two seconds.The code that you selected is cancelled.To recreate a
code, see page 22.
Reconfiguring your player’s initial set-up
• Make sure there is no disc in the player. Display the player menu on the television screen.
Now press on the NEXT and STOP keys of your player for more than 2 seconds.All
settings you made since the initial set up will be cancelled.The player is reconfigured to
the state it was in upon delivery (manufacturer’s settings).
If you switch your player off and then on again, the original choice of languages appears.
Refer to page 7 of this booklet to set up the player again.
Your DivX files won’t play
• Check that the file is actually DivX
When you encounter problems make sure that:
- the file that you are trying to play actually contains DivX video.The files often use the
term “DivX” in their filename even though they have in fact been coded in another format.
Problems playing DivX version 5.1 and the version 2.5 player
• With some recent DivX versions coding problems may arise that are directly linked to the
ability of you computer to provide the total capacity of its microprocessor during the
coding procedure and during play, this leads to malfunctions with the image or a lack of
synchronisation between sound and image.
There is no sound with the image
• Is the volume turned down? The audio codec of your player cannot play DivX files with
the most recent codecs.
• The majority of applications on your computer require the video and audio to be coded
separately.The two flows are mixed after coding. More information on this can be found
using the various Internet search engines.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 31
Further information
Recommendations and information concerning discs
CD-R and CD-RW discs
This player can play most CD-R and CD-RW discs. However, depending on the recorder of your
personal computer, the type of disc and recording method used, it may be that some discs cannot
be played, or that the performance does not meet the expected standard of quality.When playing
a CD-R disc, it is completely normal for the unit to take up to 20 seconds to recognize the disc
before starting to play. If the disc is not recognized after a period of 20 seconds, remove the disc,
and then insert it again. If after several trials, this disc cannot be recognized, make sure you have
followed the recommendations below or try another type of disc.
EN
EN
•
•
Whatever the actual recording capacity of a disc, do not fill it to maximum capacity.
Use CD-R discs rather than CD-RW (re-recordable CDs), as replay of CD-RWs may
sometimes not work properly.
•
•
Use a reliable and good quality recording software.
Before recording on a disc, close all applications on you personal computer in order to
optimise the quality and reliability of recordings on the disc.
CD-R and CD-RW discs with mp3 format “Sound” files
In the case of discs that include mp3 files, follow not only the general recommendations for CD-R
and CD-RW discs, but also the following specific recommendations:
•
The format of your mp3 files should be ISO 9660 or JOLIET.These files are compatible with
DOS and Windows applications as well as with Mac OS.
•
Your mp3 files must have a name no longer than 12 characters as well as the suffix “.mp3”.
They must be recorded in the form: title.mp3. Ensure that you do not leave spaces or use
special characters such as ( . , / , \ , = ,+) in the name.
•
•
Use a decompression transfer rate of at least 128 kb/sec (kilobytes/second) when recording
mp3 files. Sound quality with mp3 files basically depends on the rate of
compression/decompression you choose. Getting audio CD quality sound requires an
analogue/digital sampling rate, that is conversion to mp3 format, of at least 128 kb/sec and up
to 160 kb/sec. However, choosing higher rates, like 192 kb/sec or more, only rarely give even
better sound quality. Conversely, files with sampling rates below 128 kb/sec will not be played
properly.
Do not attempt to record protected mp3 files. Such files are coded and protected.
Important:The above recommendations cannot be taken as a guarantee that the DVD player will play mp3
recordings, or as an assurance of sound quality.You should note that certain technologies and methods for
mp3 file recording on CD-Rs prevent optimal playback of these files on your DVD player (that is degraded
sound quality and even, in some cases, inability of the player to read the file or files).
Information updated in January 2003
31
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 32
Further information
CD-R and CD-RW discs with JPEG format “image” files
To view your JPEG images on a TV set you do not need to record your photographs with a
resolution above 400,000 pixels (which corresponds to an image format of about 720 x 576 dots),
for television screens do not allow a higher quality given their limited characteristics. In this case
ensure that you reduce the quality of your photographs before recording on a disc in order not
to impede the proper running of your player.This is because excessively loaded pictures would
slow down or might prevent the proper functioning of the slide show during playback on your
player. Compatibility of JPEG files depends on the software on which they were created and on
the size of files expressed in pixels. Some JPEG files, including Progressive JPEG files (display in
stages) cannot be played on this appliance.
Video CD (VCD) discs
VCD (Video Compact Disc) discs enable up to 74 minutes ofVHS quality video associated with
still pictures, audio tracks and interactive menus to be recorded on a CD.
SuperVideo CD (SVCD) discs
SVCD (SuperVideo Compact Disc) discs comply with standard IEC62107, making it possible to
record up to 70 minutes of digital images and sound at standard MPEG-2 for video and MPEG-1
for audio. Compatibility of SVCD discs depends on the MPEG coding software, the disc design
software, as well as the recording software used and the discs themselves.
Important: Despite considerable progress made in providing compatibility with as many different discs as
possible, reading of discs not conforming to Audio CD,Video CD and Super Video CD (S-VCD) disc standards
cannot be guaranteed.
DVD-R and DVD-RW discs
Your player can play DVD-R and DVD+R (single recording) and DVD-RW and DVD+RW
(re-recordable) discs. Recordings on DVD-RW discs must be made in DVDVideo mode.
Recordings on DVD+RW discs must be made in accordance with the specifications for the 4.7 Gb
capacity DVD+RW disc format. Compatibility is dependent on which DVD writer, writer software
and disks are used.
DivX discs
DivX is a compression format answering the MPEG-4 standard and that allows an entire film to
be contained on a single CD.
The compatibility of DivX formats depends on MPEG-4 coding software, disc design software and
the recording software employed, as well as the discs themselves.
What codecs can your player read?
•
•
•
Playback of DivX 3.11 content.
Playback of DivX 4 Content (Based on MPEG-4 Simple Profile)
Playback of DivX 5 Content (MPEG-4 simple profile plus additional features such as bi-
directional frames. Qpel and GMC are not supported).
•
•
•
•
•
Resolutions up to 720 x 480 at 30fps and 720 x 576 at 25fps are supported.
Macroblocks per second 40500.
Maximum average bitrate 4000 kbps
Maximum peak bitrate during any 3 seconds of video 10000 kbps
MinimumVBV buffer size (kbytes) 384k bytes
Note: for DivX 3.11 content at Home Theater Profile, the required average bitrate is 1000 kbps, and the
required maximum peak bitrate is 4000 kbps. Mpeg4 and Xvid content may or may not play back
depending on the exact recording method and codec used.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
2_DTH223_en 23/03/04 18:15 Page 33
Further information
Caution
• Protect the player from moisture and excess heat (e.g. fireplace) or equipment creating strong
magnetic or electric fields (i. e. speakers ...). Disconnect the power cable from the mains
electricity supply if the player malfunctions.Your player is not intended for industrial use but
for domestic purposes only. Use of this product is for personal use only. Copying CDs or
downloading music files for sale or other business purposes is or may be a violation of copyright
law.
• Disclaimer of warranty: to the extent allowed by applicable law. Representations and warranties
of non-infringement of copyrights or other intellectual property rights resulting from the use of
the product under conditions other than as hereabove specified are hereby excluded.
EN
EN
Condensation
• If your player or a disc have been stored in a cold atmosphere, as for example during
transportation in the winter, wait for approximately 2 hours until they have reached room
temperature.
Discs
• Always handle your discs with care. Hold a disc with fingers on the border or hole.Always place
disc with the label facing upward (in case of a single-sided disc).Always place the disc properly
into the tray using the proper guide area.Always use a soft cloth to clean discs if necessary, wipe
from the centre to the border.Always put discs back into their cases after playing and store in a
vertical position. Never use record cleaning sprays, benzine, static electricity liquids or any other
solvent, if the disc surface is dirty.Wipe gently with a soft damp (water only) cloth, never wipe
the disc in a circular motion, since circular scratches are likely to occur and could cause noise
during playback.
For your safety
• Never open the player or any of its components. It can be dangerous for you or for certain
fragile components.You could receive an electric shock or touch the laser beam. Do not try to
gain access to the device through the tray or any other openings.
Technical data
Power requirements 230V - 50 hertz
Power consumption 15 W (approx. 1,5 W when power is OFF)
Operating temperature range + 5 to + 35° C
Operating humidity range 10 to 75% (no condensation)
Nominal Specification - THOMSON reserves the right to change the specifications without notice.
THOMSON shall not be responsible if the player is not used according to this manual.
SHINCO - DTH 223 EN ISSUE 1 / RST - BEI / 04-2004
33
Download from Www.Somanuals.com. All Manuals Search And Download.
|