9A10490700
Z
-
SR LXi
Z
Hi-Fi Table Radio
OWNER’S MANUAL
TEAC CORPORATION
3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081
TEAC AMERICA, INC.
TEAC CANADA LTD.
7733 Telegraph Road, Montebello, California 90640 Phone: (323) 726-0303
5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada Phone: (905) 890-8008
TEAC MEXICO, S.A. De C.V
Campesinos N°184, Colonia Granjas Esmeralda, Delegacion Iztapalapa, CP 09810, México DF
Phone: (525) 581-5500
Includes adapters for:
TEAC UK LIMITED
Unit 19 & 20, The Courtyards, Hatters Lane, Watford, Hertfordshire, WD18 8TE, U.K.
Phone: (0845) 130-2511
iPod nano
TEAC EUROPE GmbH
Bahnstrasse 12, 65205 Wiesbaden-Erbenheim, Germany Phone: 0611-71580
iPod with video
iPod mini
iPod with Click Wheel
iPod with color display
TEAC AUSTRALIA PTY., LTD.
A.B.N. 11 113 998 048
30 Tullamarine Park Road, Tullamarine, VIC 3043, Australia Phone: (03) 8336-6500
This appliance has a serial number located on the rear panel. Please record
the model number and serial number and retain them for your records.
Adapters sold separately:
Model number
Serial number
.
iPod with dock connector
1006 MA-1087A
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Before Using the Unit
Remote Control Unit
Display
The provided Remote Control Unit allows
the unit to be operated from a distance.
When operating the remote control unit,
point it towards the remote sensor on the
front panel of the unit.
Thank you for choosing TEAC. Read this Read this before attempting any
manual carefully to get the best operations.
performance from this unit.
A
B
C
D
< As the unit may become warm during
operation, always leave sufficient space
around the unit for ventilation.
Important Safety Instructions . . . . . . . . . . 2
Before Using the Unit . . . . . . . . . . . . . . . . 4
< Even if the remote control unit is
operated within the effective range,
remote control operation may be
impossible if there are any obstacles
between the unit and the remote control.
Remote Control Unit. . . . . . . . . . . . . . . . . 5
< The voltage supplied to the unit should
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
match the voltage as printed on the rear
Unit Functions. . . . . . . . . . . . . . . . . . . . . . 6
Connection. . . . . . . . . . . . . . . . . . . . . . . . 8
panel. If you are in any doubt regarding
this matter, consult an electrician.
G
F
E
< If the remote control unit is operated near
other products which generate infrared
rays, or if other remote control devices
using infrared rays are used near the unit,
it may operate incorrectly. Conversely, the
other products may also operate
incorrectly.
< Choose the installation location of your
unit carefully. Avoid placing it in direct
sunlight or close to a source of heat. Also
avoid locations subject to vibrations and
excessive dust, heat, cold or moisture.
A
Shows the digital clock, sleep time or
preset channels.
Getting Started. . . . . . . . . . . . . . . . . . . . 10
Setting the Clock . . . . . . . . . . . . . . . . . . 11
Basic Operation. . . . . . . . . . . . . . . . . . . . 12
Listening to iPod . . . . . . . . . . . . . . . . . . . 14
Operating iPod . . . . . . . . . . . . . . . . . . . . 15
Listening to an External Source . . . . . . . . 17
Listening to the Radio . . . . . . . . . . . . . . . 18
Preset Tuning . . . . . . . . . . . . . . . . . . . . . 19
Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
B
C
D
E
Lights during muting.
Lights when the sleep function is active.
Lights in preset tuning mode.
Lights when the timer is on.
< Do not place the unit on an
amplifier/receiver.
Battery Installation
< Do not open the cabinet as this might
result in damage to the circuitry or
electrical shock. If a foreign object should
get into the unit, contact your dealer or
service company.
Troubleshooting . . . . . . . . . . . . . . . . . . . 22
Specifications . . . . . . . . . . . . . . . . . . . . . 23
F
Shows frequency, volume, date, etc.
G
When the unit is on, one of these
indicators lights to show the current
source.
< When removing the power plug from the
wall outlet, always pull directly on the
plug, never yank the cord.
1. Remove the battery compartment cover.
2. Put in the lithium battery (CR2032, 3V).
3. Close the cover.
< Do not attempt to clean the unit with
chemical solvents as this might damage
the finish. Use a clean, dry cloth.
Battery Replacement
If the distance required between the
remote control unit and main unit
decreases, the battery is exhausted. In this
case, replace the battery with a new one.
< Keep this manual in a safe place for
future reference.
Precautions concerning batteries
Do not heat or disassemble batteries and
never dispose of old batteries by throwing
them in a fire.
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Unit Functions
F
O
P
STANDBY/ON
MUTING
Use this button to turn the unit on or
standby.
Use this button to mute the sound.
MEMORY
The equipment draws a nominal
amount of power from the AC outlet
even with its STANDBY/ON switch in
the STANDBY position.
In TUNER mode, use this button to preset
stations.
Q
R
PRESET
In TUNER mode, use this button to select
a preset station.
G
H
Play/Pause (y/J)
Use this button to start or pause
playback of iPod.
iPod operation buttons
TIMER
SCROLL (‡/°)
Use these buttons to scroll up and down
the menu.
Use this button to turn on or off the
timer function.
A
B
C
D
E
F G
H
I
J
K
L
M
N
L
I
TIMER SET
MENU
Use this button to set a timer.
Use this button to go back to the
previous menu.
A
B
DIMMER
J
TUNING(‡/°)/Skip(.//)
In TUNER mode, use these buttons to
tune in stations.
In iPod mode, use these buttons to skip
tracks. Hold down this button to search
for a part of a track.
Use this button to dim the display.
SHUFFLE
Use this button to turn on and off the
shuffle playback.
F
VOLUME
C
Press these buttons to adjust the volume
level.
E
D
Q
P
G
J
REPEAT
Use this button to set the repeat
function.
O
B
C
SLEEP
K
CLOCK ADJ
Use this button to set sleep timer.
Hold down this button for more than 3
seconds to enter clock setting mode.
SELECT
D
FM/AM
Use this button to confirm selection in
menus.
In TUNER mode, press this button to
select FM or AM.
L
Speakers (Stereo)
Display
B
M
N
E
FUNCTION
Note:
To simplify explanations, instructions in
R
Use these buttons to select the source
you want to listen to.
Dock connector
this manual refer to the names of the
buttons and controls on the front panel
only. Associated controls on the remote
control will also operate similarly.
Before use, insert an appropriate Dock
adapter in the Dock (see page 10).
Insert an iPod mobile digital device into
this dock.
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
CAUTION:
A
D
E
AM loop antenna
VIDEO OUT
< Switch off the power before making connection.
Connect the supplied AM loop antenna
to the AM ANTENNA terminal.
Place the antenna on a shelf or hang it
on a window frame, etc., in the
direction which gives the best
reception.
If the S-VIDEO connection method is
not available, use a commercially
available RCA (pin) video cable to
connect to VIDEO IN of your TV set.
< Read the instructions of each component you intend to use with this unit.
< Be sure to insert each plug securely. To prevent hum and noise, do not bundle the
connection cords.
If you want, you can hook the AM
antenna on a wall as shown below:
PHONES
For private listening, insert the
headphones plug into this jack, and
adjust the volume using the VOLUME
button.
B
F
AUX IN
You can connect a portable audio
player to this jack.
See page 17 for details.
B
C
FM antenna
While in FM mode, tune in an FM
station and extend the lead to find the
best position for the reception. This
antenna may need to be repositioned if
you move your unit to a new location.
A
G
DC IN jack
Connect the provided AC adapter to
this jack. Then connect the AC
adapter’s plug to the AC wall socket.
E
F
G
C D
S-VIDEO OUT
You can enjoy videos or slideshow
reproduced by your iPod through your
TV screen.
Connect this jack to S-VIDEO IN of your
TV set using a commercially available S-
Video cable.
< Do not use any AC adapters other than
the one included with this unit to avoid
fire, electric shock, etc. Be sure to
connect the adapter to an AC outlet
that supplies the correct voltage.
Only use one of
method of video
connection.
S-VIDEO IN VIDEO IN
AC wall socket
TV
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Setting the Clock
The SR-LXi comes mounted with an adapter 3. Insert the adapter into the Dock of
“60GB (color) + Photo 40GB/60GB”. To
play your iPod through the SR-LXi, you have
first to check if the factory mounted adapter
fits your model of iPod. If it does not, you
have to replace it with a correct one, as
explained below.
the SR-LXi.
Fit the front edge of the adapter into the
Dock, and then press the back edge of
the adapter onto the Dock until a slight
“click” is heard indicating the adapter is
inserted correctly.
TIMER .// CLOCK
ADJ
1. Remove the adapter from the Dock
of the SR-LXi.
1
1
Press and hold the CLOCK ADJ button
for more than 3 seconds and release
it when the time display starts
blinking.
3
Press the skip buttons (.//) to
select Year, and then press the
CLOCK ADJ button.
Hold the left and right sides of the
adapter and gently pull it up.
2
2. Choose the Dock adapter that fits
your iPod mobile digital device.
“Video 30GB” for iPod with video (30
GB).
< If you leave the unit idle for about 1
minute, the clock setting mode will be
cancelled.
< When you need to remove the adapter,
hold the left and right sides of the
adapter and gently pull it up.
“Video 60GB” for iPod with video (60
GB).
4
Press the skip buttons (.//) to
select Date, and then press the
CLOCK ADJ button.
“nano” for iPod nano.
“mini” for iPod mini.
< When you don’t use the Dock, use the
supplied cover for the Dock to prevent
dust from settling on the Dock.
2
Press the skip buttons (.//) to
adjust the clock, and then press the
CLOCK ADJ button.
“20GB (color) + Photo 30GB” for iPod
with color display (20GB, 30GB, U2
Special Edition).
If the power supply is interrupted, the
settings kept in memory (clock, preset
stations, timer setting) will be erased.
Compatible iPod Software
In case your iPod will not work with the SR-
LXi or with the remote control unit,
software update may solve the problem.
Visit the Apple website and download the
latest iPod Software.
“60GB (color) + Photo 40GB/60GB” for
iPod with color display (40GB, 60GB).
< Hold down the skip button (. or
/) to adjust the clock continuously.
“20GB + U2” for iPod with Click Wheel
(20 GB, U2 Special Edition).
The clock starts from 00 second.
“40GB” for iPod with Click Wheel (40
GB).
iPod is a trademark of Apple Computer,
Inc., registered in the U.S. and other
countries.
< Use a commercially available adapter to
play iPod with dock connector.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operation
3
Play the source, and adjust the
volume using the VOLUME buttons
(–/+).
Muting
Sleep Timer
To mute the sound temporarily, press the
MUTING button. Press the MUTING
button again to restore the sound.
You can set a sleep timer so the unit
turns itself off after a specified time.
Press the SLEEP button repeatedly until
desired time appears on the display.
3
2 1
The volume is adjustable from MIN (00)
to MAX (40). Hold down the VOLUME –
or + buttons to turn down or up the
volume continuously.
1
Press the STANDBY/ON switch to
turn the unit on.
< The MUTING indicator lights on the
display to indicate that the muting is
engaged.
< If you change the volume or source
during the muting, the muting will be
canceled.
< The unit turns on with the source that
was last selected. If the iPod that is in
playback mode is inserted into the Dock,
the SR-LXi will automatically turn on and
start playback of the iPod.
SLEEP 90, 60 or 30:
The power will be switched off 90, 60 or
30 minutes later.
Headphones
Dimmer
< You can also use the FUNCTION button
or Play/Pause button (y/J) to turn the
unit on.
OFF:
The sleep timer is off.
< When you set the sleep timer, the display
is dimmed automatically.
2
Press the FUNCTION button to select
a source.
< If you want to check the remaining time,
press the SLEEP button once. The
remaining time will be displayed for a
few seconds.
You can dim the front panel’s display by
pressing the DIMMER button.
Insert the headphones plug into the
PHONES jack, and adjust the volume.
< To listen to an external source connected
to the AUX IN jack, select AUX.
< This function will be cancelled when the
STANDBY/ON switch is pressed.
CAUTION
< If you press the iPod button when no
iPod is docked, the iPod indicator on the
display blinks.
Always lower the volume level prior to
plugging in your headphones. TO AVOID
DAMAGING YOUR HEARING - Do not
place your headphones on your head
until after you have plugged them in.
< When you set the sleep timer, the display
is dimmed automatically.
12
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to iPod
Operating iPod 1
Insert the iPod into the Dock of the SR-
LXi.
To select iPod mode
A
C
B C
A
To suspend playback temporarily
(pause mode)
To skip to the next or a previous
track
Then push the Play/Pause button (y/J)
on the iPod or the SR-LXi. The SR-LXi
will automatically turn on and start
playback from the iPod’s music list.
Select “iPod” using the FUNCTION
button or the “iPod” button of the
remote control unit. If an iPod is already
docked, playback will start.
< Make sure to use an appropriate Dock
adapter (see “Getting Started” on page
10).
During playback, repeatedly press the
Skip button (. or/ ) until the
desired track is found. The selected track
will be played from the beginning.
Press the Play/Pause button (G /J )
during playback. Playback stops at the
current position. To resume playback,
press the Play/Pause button (G/J) again.
When no iPod is docked the iPod
indicator on the display blinks.
< If you remove the iPod during playback,
the SR-LXi automatically turns standby.
< You can also use the Play/Pause button
(y/J) to select “iPod”.
< When the . button is pressed during
playback, the track being played will be
played from the beginning. To return to
the beginning of the previous track, press
the . button twice.
< The battery of the iPod is recharged to
the full whenever the iPod is docked and
the SR-LXi is connected to the AC power
supply.
B
Search for a part of a track
< When headphones are plugged into the
iPod, sound comes from both the
speakers of the SR-LXi and the
headphones.
During playback, hold down the Skip
button (. or /) for more than 2
seconds and release it when the part you
want to listen to is found.
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating iPod 2
Listening to an External Source
1
3
Connect the PHONES jack (audio
output jack) of a portable audio
player to the AUX IN jack of the SR-
LXi using the supplied stereo mini
plug cable.
Play the source, and adjust the
volume of both the SR-LXi and the
audio player.
To go back to the previous
menu
To activate the shuffle mode
During playback, press the SHUFFLE
button to change the shuffle mode.
Each time the SHUFFLE button is pressed,
the SHUFFLE setting of iPod is changed
as follows:
Press the MENU button. It works same as
the MENU button of the iPod.
songs
albums off
Select the menu item
When using the PHONES jack of your
mini player, you must adjust the volume
of the mini-player or you may hear no
sound from your SR-LXi.
If iPod is set to shuffle songs or albums,
the Shuffle icon ( ) appears in the
iPod’s display.
You can use this way of connection to
listen to an iPod that has no Dock
connector or that has, but an appropriate
Dock adapter is not available.
< Turning the volume of the mini player up
too high may cause the sound from your
SR-LXi to be distorted. If this is the case,
reduce the volume of the mini player
until the distortion stops and then adjust
the volume level of the SR-LXi to a
comfortable listening level
To activate the repeat mode
2
Select “AUX” using the FUNCTION
button.
During playback, press the REPEAT
button to change the repeat mode.
Each time the REPEAT button is pressed,
the REPEAT setting of iPod is changed as
follows:
Press the MENU/ALBUM buttons (‡/°)
to scroll to the menu item you want. And
then press the SELECT button.
One
All
off
If the iPod is set to repeat one song, the
repeat Once icon ( ) appears in the
iPod’s display.
If the iPod is set to repeat all songs, the
repeat icon ( ) appears in the iPod’s
display.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the Radio
Preset Tuning
Selecting stations which cannot be
You can program 10 FM & 10 AM channel
presets.
How to select a preset station
tuned automatically (manual selection)
When the Skip button (.or/) is
pressed momentarily the frequency
changes by a fixed step.
1
To select FM or AM, press the TUNER
(FM/AM) button.
If the power supply is interrupted, the
settings kept in memory (clock, preset
stations, timer setting) will be erased.
Press the Skip button repeatedly until the
station you want to listen to is found.
2 1
3
1
Tune in a station you want to listen
to (see page 18).
1
2
Select “TUNER” using the FUNCTION
button.
2
Press the MEMORY button.
2
Press the PRESET button repeatedly
until the desired preset station is
found.
To select FM or AM, press the TUNER
(FM/AM) button again.
If the reception is poor
3
Within 5 seconds, select a preset
channel to store the station using the
PRESET button.
For the best reception, rotate the FM or
the AM antenna until you get stations
clearly.
3
Select the station you want to listen
to (auto selection).
4
Within 5 seconds, press the MEMORY
button.
Hold down the Skip button (.or/)
for more than 2 seconds and release it
when the frequency display begins to
change.
When a station is tuned in, the tuning
process will stop automatically.
1
To store more stations, repeat steps
to
< To stop the auto selection, press the Skip
4
.
button.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer
2
Set the start time using the Skip
buttons (.//), and then press
the TIMER SET button.
< Playback volume will gradually increase
up to your set volume when the unit is
turned on by timer.
< If the source is set to “iPod” but no iPod
is set, the unit will turn on into TUNER
mode.
TIMER .//
SET
STANDBY/ TIMER
ON
< When the source is set to “TUNER” and
the unit turns on, it will tune in to the
station you selected last time.
< The unit can be programmed to turn on
at a specified time. The unit will turn off
after 60 minutes of reaching the
specified time.
3
Select a source (iPod or TUNER) using
the Skip buttons (.//), and
then press the TIMER SET button.
To turn on the timer
1
After setting the timer, press the
TIMER button to turn the timer on.
< Adjust the clock before setting the timer
(see page 11).
The Timer indicator (
the display.
) appears on
< You cannot select “AUX”.
If the power supply is interrupted, the
settings kept in memory (clock, preset
stations, timer setting) will be erased.
To turn off the timer
When you don’t use the timer, press the
TIMER button to turn it off.
4
Set the volume using the Skip
buttons (.//), and then press
the TIMER SET button.
2
3
Prepare the source.
When the source is set to “iPod”, insert
an iPod.
When the source is set to “TUNER”, tune
in a station.
Setting the timer
1
Press the TIMER SET button.
The Timer indicator (
from the display.
Press the TIMER button again to turn it
on.
) disappears
The volume for timer operation is
adjustable from 10 to 40.
Setting the timer is now completed.
Press the STANDBY/ON switch to
turn the unit off (standby).
The clock and the Timer indicator (
blinks on the display.
)
< If no button is pressed for about 1
minute, the timer setting mode will be
cancelled.
Don’t forget to turn the unit off
(standby), or the timer won’t work.
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Specifications
If you have problems with your system, look
TUNER Section
iPod Player
Cannot insert the iPod.
through this chart and see if you can solve
the problem yourself before calling your
dealer or TEAC service center.
Frequency Range . . . . . . . . . . . . FM: 87.5 MHz to 108.0 MHz
AM: 522 kHz to 1,629 kHz
e Check the dock adapter.
e Remove dust or obstacles from the
Dock connector of the SR-L200i and
the iPod, and insert the iPod again.
SPEAKER SYSTEM Section
General
No power
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 mm x 2
Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ohms
Will not play.
e Check the connection to the AC power
supply. Check and make sure the AC
source is not a switched outlet and
that, if it is, the switch is turned on.
Make sure there is power to the AC
outlet by plugging another item such as
a lamp or fan into the outlet.
e Remove the iPod from the dock, wait a
few seconds, and insert it again.
e Software update may solve the
problem. Visit the Apple website and
download the latest iPod Software.
GENERAL
Total Output Power. . . . . . . . . . . . . . . . . . . . . . . . 4 W + 4 W
Power Requirement . . . . . . . . . . . . . . . . . . . AC 230 V, 50 Hz
Power Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 W
Dimension (W x H x D) . . . . . . . . . . . . . . 320 x 179 x 171 mm
Weight (Net). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.8 kg
Cannot operate the iPod.
e Set off the HOLD switch of the iPod.
No sound from speakers.
e Select the source by pressing the
TUNER, iPod or AUX button.
e Adjust the volume.
e Pull out the headphone’s plug from the
PHONES jack.
e If the MUTING indicator lights on the
display, press the MUTING button.
Tuner
Standard Accessories
Cannot listen to any station, or signal is
too weak.
e Tune in the station properly.
e Rotate the FM or the AM antenna until
you get stations clearly.
Remote Control Unit (RC-1084 or RC-1085) x 1
Battery (CR2032) for Remote Control Unit x 1
AM loop antenna x 1
Stereo mini plug cable x 1
AC Adapter x 1
The sound is noisy.
Dock adapter x 8
(adapter “60GB (color) + Photo 40/60GB” premounted)
Cover for the Dock x 1
If normal operation cannot be
recovered, unplug the power cord from
the outlet and plug it again.
e The unit is too close to a TV or similar
appliances. Install the unit apart from
them, or turn them off.
Owner’s Manual x 1
Warranty Card x 1
Remote control doesn’t work.
e Press the STANDBY/ON switch to turn
the unit on.
Maintenance
e If the battery is exhausted, replace it
with a new one.
e Use remote control unit within the
range (5 m) and point at the remote
sensor on the front panel.
e Clear obstacles between the remote
control unit and the main unit.
e If a strong light is near the unit, turn it
off.
If the surface of the unit gets dirty, wipe
with a soft cloth or use a diluted mild
liquid soap. Be sure to remove any excess
liquid completely. Do not use thinner,
benzine or alcohol as they may damage
the surface of the unit. Allow the surface
of the unit to dry completely before
using.
• Design and specifications are subject to change without
notice.
• Weight and dimensions are approximate.
• Illustrations may differ slightly from production models.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
|