Teac CRT Television CT W32ID User Manual
COLOUR TELEVISION  
C T - W 3 2 I D  
STANDBY  
ATV/DTV  
-
EXIT  
+
SELECT  
ATV MENU  
DTV MENU  
+
-
-
V
OL  
+
P
TV/AV  
PICTURE  
S.E.  
MUTE  
EPS&ESS  
DEF  
2
A
J
B
C
GHI  
3
1
K
L
MNO  
5
PQR  
DBB  
ZOOM/INS.  
CAPS  
4
6
STU  
7
V
WX  
8
Y
Z
9
+-!  
R
ECA  
L
L
-/--  
0
ESC  
NOTEBOOK  
RETURN  
CANCEL  
DISPLAY/DEL.  
INFO/HOLD  
TXT  
FAVORITE  
SUBTITLE  
FAVORITE  
SLEEP  
TIME  
P
AGE UP/ REVEAL SUBCODE  
GUIDE/SIZE  
GAME  
NIC  
A
M
PAGE DOWN/MIX  
CCD  
L
IS  
T
OWNER’S MANUAL  
IMPORTANT!  
WARRANTY INFORMATION INSIDE.PLEASE READ  
www.teac.com.au  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY REGISTRATION  
Please read this warranty card.  
Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service.  
Warranty Terms & Conditions  
1.  
TEAC warrants to the original retail purchaser only, that this product is free from defects in material and  
workmanship under normal domestic use and authorises free service during the warranty period at any  
TEAC Authorised Centre only. TEAC warranty only applies to products purchased, used and serviced in  
Australia.  
2.  
3.  
4.  
Subject to the terms herein, this warranty effectively covers the equipment as specified in the Warranty  
Periods Table from the date of purchase.  
All parts, except the external cabinet, are warranted as specified in Warranty Periods Table, and will be  
repaired or replaced at the sole judgement of TEAC.  
Normal customer maintenance as described in the owner’s manual is not covered by this warranty (such as  
cleaning VCR heads etc.)  
5.  
6.  
This warranty does not apply to equipment showing abuse, damage or that it may have been tampered  
with, altered or repaired outside any TEAC Authorised Service Centre. If so, the warranty will be void.  
*Your nearest Authorised TEAC Service Centre is listed in your Owners Manual  
In the event that this unit or any defective parts must be returned to TEAC Service Centres, a copy of this  
warranty certificate and of your purchase receipt must be enclosed to be a valid warranty. Such  
equipment or parts must be sent freight prepaid to the nearest authorised TEAC Service Centre. After the  
repair, the unit will be available for collection by the owner or it will be returned to the owner. The  
warranty does not cover freight or insurance. In all cases of in-transit damages or loss, a claim must be  
filed against the carrier by the purchaser.  
7.  
In home service will only be provided as part of this warranty if all the following conditions are met;  
a) The product is a Colour Television of 51cm screen size or over.  
b) The product is within the warranty period.  
c) The product is located within the normal service area of the local TEAC Service Provider.  
In any other situation or circumstance, where an in home service call is made, a service fee will be  
charged by the Service Provider.  
8.  
9.  
TEAC Total Care in home service and installation is available at competitive rates.  
No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in  
connection with the sale of any equipment other than as stated in this warranty and outlined above.  
10. In no event will TEAC be responsible or liable for indirect or consequential damages from interrupted  
operations or other causes.  
11. Warranty is not transferable to any subsequent purchaser if the product is sold during the warranty period,  
TEAC PRODUCT  
WARRANTY PERIOD  
Televisions / Plasma 106 cm and above  
LCD televisions 56cm and above  
Televisions – 51cm and above  
Televisions under 51 cm  
Digital Set Top Boxes  
VCR  
1 Year (In-Home Service Included)  
1 Year (In-Home Service Included)  
1 Year (In-Home Service Included)  
1 Year (No In-Home Service)  
1 Year (No In-Home Service)  
1 Year (No In-Home Service)  
1 Year (No In-Home Service)  
1 Year (No In-Home Service)  
DVD  
Audio Systems  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARRANTY PROCEDURES  
Please keep this information for your own records.  
Please refer to the owner’s manual to ensure that you have followed the correct installation and  
operating procedures.  
1. Read owner’s manual carefully  
2. If you require Warranty Service, please contact the TEAC Service Centre  
3. Please have your purchase receipt as your proof of purchase and the following details  
completed for a valid Warranty.  
Owner’s Name  
Owner’s Address  
Postcode  
Model Name/No.  
Dealer’s Name  
Serial No.  
Dealer’s Address  
Postcode  
4. Please ensure that your product is packed appropriately upon return to the service centre.  
If you have any other queries regarding service or warranty please contact the TEAC Service Centre in  
your State.  
[email protected]  
www.teac.com.au  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
6. DTV OPERATION  
1. INTRODUCTION  
1.1 FEATURES  
6.1 LANGUAGE SETTING  
6.2 CHANNEL SETTING  
6.2.1 AUTO SEARCH  
6.2.2 MANUAL SEARCH  
6.2.3 FIRST TIME INSTALLATION  
6.3 CONFIGURATION  
6.3.1 TIME ZONE  
1.2 PRECAUTIONS  
1.3 DESCRIPTION OF CONTROL  
KEYS & CONNECTIONS  
1.3.1 FRONT VIEW  
1.3.2 EXPLANATION OF JACKS  
OPERATION OF REMOTE CONTROL  
1.4  
6.3.2 SUBTITLE  
6.3.3 FAVOURITEMODE  
6.3.4 CHANNEL LISTMODE  
6.3.5 PASSWORD SETTINGS  
1.4.1  
DESCRIPTION OF REMOTE  
CONTROL KEYS  
1.4.2 INSTALLATION OF BATERRIES  
6.4  
CHANNEL LIST  
EFFECTIVELY USING THE REMOTE  
CONTROLLER  
1.4.3  
6.4.1 DELETE CHANNEL  
6.4.2 EDIT CHANNELNAME  
6.4.3 LOCK CHANNEL  
6.4.4 FAVOURITESLIST  
6.5 ELECTRONIC PROGRAM  
GUIDE(EPG)  
2. CONNECTIONS  
2.1  
2.2  
2.3  
ANTENNA CONNECTION  
CABLE TV CONNECTION  
TV + VCR + DVD CONNECTION  
3. ATV GENERAL OPERATION  
3.1 AUTO SEARCH  
TROUBLE SHOOTING  
7.  
8.  
7.1  
7.2  
PROBLEMS OF PICTURE  
PROBLEMS OF OPERATION  
3.2 MANUAL SEARCH  
3.3 FINE TUNING  
SPECIFICIATION  
3.4 CHANNEL NAME SETTING  
3.5 CHANNEL SKIP  
3.6 COLOUR AND SOUNDSYSTEM  
SELECTION  
3.7 PICTURE ADJUSTMENT  
3.8 PRESET PICTURE MODE  
3.9 SOUND ADJUSTMENT  
3.10 EQUALISER SELECTION  
3.11 SOUND MODE SELECTION  
4.  
TIMER FUNCTION  
4.1  
4.2  
4.3  
CLOCK  
ON-TIMER  
OFF-TIMER  
5. SPECIAL FUNCTION  
5.1 SVM SETTING  
5.2  
5.3  
5.4  
5.5  
BLUE BACK SETTING  
GEOMAGNETIC CORRECTION  
FAVORITE CHANNEL SETTING  
TETRIS GAME  
5.6 CALENDAR  
PARENTAL GUIDE  
NOTEBOOK  
PROGRAM SWAP  
5.7  
5.8  
5.9  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.  
INTRODUCTION  
FEATURES  
1.1  
-
-
PAL/BG  
TV Receiving System  
AV Color System  
PAL, NTSC 3.58 & 4.43  
Sound Systems  
DTV Systems  
Preset Programs  
Preset Method  
Tuning Method  
Voltage Range  
Display Language  
Functions Select  
Remote Control  
Input/Output  
- BG  
-
DVB-T(FreeTo Air, Standard Definition Receiver For Australia)  
- 100 (For ATV Mode)  
-
-
Auto Search, Manual Store, Fine Tune(For ATV Mode)  
FS  
- 240V~, 50Hz  
English  
-
-
-
Pop Up Menu  
Full Function Infra-red Remote Controller  
2 RCA-Type AV INPUT  
1 S-VIDEO INPUT  
-
-
-
-
-
1 YUV INPUT  
1 RCA-TYPE AV OUTPUT  
SPDIF DIGITAL OUTPUT  
RS232  
-
Useful Functions  
- Sleep Timer(15-240min.)  
- Auto Off (After 15 Min With No Signal)  
Blue Background Selection (While No Signal)  
-
- 3 Default,1 User Picture Settings  
-
-
Channel Skip  
AV Stereo  
- Surround Mode  
On/Off Timer  
Game  
-
-
- Notebook  
- Calendar  
- Favorite Channel Setting  
- Program Prearrange  
-
- Super Woofer  
ESS & EPS  
- Program Swap  
- Child Lock  
- Language Setting  
-
Time Zone  
Electronic Program Guide(EPG)  
Fully Comply With DVBAnd MPEG-2 Standards  
SPDIF Digital Audio Output  
-
-
-
-
Software Upgraded Through RS-232 Port  
- Automatic Network Search For Newly Added Channels/Programs  
- Parental Control For Channels  
-
256 Colors On-ScreenDisplay-Support For English  
-
-
OSD Teletext(DVB Compliant) And SubtitleFunction Support  
Extensive Channel Editing Functions-Rename, Delete, Lock,...  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.2 PRECAUTIONS  
CLEANING THE UNIT  
WARNING  
When the cabinet has become dirty or  
stained, dip a piece of gauze or soft cloth  
into a dilute solutionof neutral cleanserand  
wipe clean. Never use thinner or benzene  
since they will damage the surface of the  
cabinet.  
TO REDUCE THE RISK OF FIRE  
OR ELECTRIC SHOCK, DO NOT  
EXPOSE THIS APPLIANCE TO  
RAIN OR MOISTURE.  
When the television screen become dirty,  
wipe it gently with a piece of soft, lint-free  
cloth. Do not scratch the surface of the  
screen.  
CAUTION  
To reduce the risk of electric shock, do not  
attempt to open the cabinet. There are no parts  
inside you can service yourself. Refer all  
servicing to qualified personnel.  
To ensure reliable operation and to protect the  
unit from overheating, the ventilation slots and  
openings must not be blocked or covered.  
Avoid placing the unit in enclosed spaces such  
as a bookcase, unless there is adequate  
ventilation.  
NOTE ON CONDENSATION  
Moisture condensation may occur inside  
the unit when it is moved from a cold  
place to a warm place or under high  
humidity .  
Be  
completely  
evaporated  
sure any condensation has  
the unit.  
before power on  
Keep this unit away from radiators and other  
heat sources.  
Avoid usingthe unit near strongmagneticfields.  
Do not push objects of any kind into this unit  
through the cabinet slots as they could touch  
current carrying parts or short-circuit parts,  
resulting in fire, electric shock, or damage to  
the unit.  
Be careful not to spill liquid of any kind on this  
unit. If liquid is spilled into the unit, consult a  
qualified service engineer.  
Use this unit in the horizontal(flat) positiononly.  
Avoid places the unit to strong vibration.  
Do not place heavy objects on the unit. This  
may damagethe cabinetor cause troublewithin  
the unit.  
Unplug the unit from the AC outlet when it is  
not to be used for a long period of time.  
When there is lightning, unplug the unit from  
the AC outlet immediately. Never touch the  
antenna wire during a lightning storm.  
You may experience static discharge when  
touching the unit. If this happens, and the unit  
the  
disconnect the plug from the wall outlet.  
fails to operate, turn off  
power and  
When installing the TV receiver, please make  
sure that a clearance of minimum 10 cm is kept  
between the top side, back of the TV and the  
,
nearest wall or furniture enclosure in order to  
allow proper ventilation for the TV set.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.3 DESCRIPTION OF CONTROL KEYS & CONNECTIONS  
1.3.1 FRONT VIEW  
Digital Television  
9
2 3 8 7 6 5  
4
1
1. POWER button  
Turn the TV on or off.  
6. MENU button  
Press it to display ATVmain menu.  
2. STANDBY (LED INDICATOR)  
Lights to show AC power is available.  
7. TV/AV button  
Choose between TV programming  
and the AV input.  
3. SENSOR  
Receive infra-red signals from the  
remote controller.  
8. AUTO SEARCH button  
Directly access to auto search for ATV  
mode without going into submenu by  
pressing and holding this button for 3  
seconds.  
4. PROGRAM UP/DOWN buttons  
Select channel numbers.  
5. VOLUME UP/DOWN buttons  
Press it to increase or decrease the  
volume of TV.  
9. FRONT AV INPUT jacks (AV1 INPUT)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.3.2 EXPLANATION OF JACKS  
YUV  
INPUT  
AV AV  
INPUT2 OUTPUT  
75OHM  
ANTENNA  
INPUT  
Y
VIDEO  
VIDEO  
AUDIO-L  
C
C
b
r
AUDIO-L  
AUDIO-R  
SPDIF OUTPUT  
RS232  
AUDIO-R  
Digital Audio Output& RS232 Port  
Rear Panel  
AV INPUT1  
R
L(MONO)  
VIDEO  
S-VIDEO  
AUDIO  
Front AV Input  
(AV1 INPUT)  
75 OHM ANTENNA INPUT Lets you connect a coaxial cable to receive the signal from the antenna or  
cable.  
Y, Cb, CrProvides optimum picture quality because the video is separated into three signals.Use three  
video grade cables for the connection.When using this connection make sure to connect left and right  
audio cables to the AUDIO input jacks.  
Press TV/AVto choose the video input channel. ChooseYUV to view material playing on equipment  
connected to the component inputs.  
R (RIGHT) AUDIO Provides right audio connection. The right audio connector is usually red.  
Press TV/AVto choose the video input channel. Choose AV1 to view material playing on equipment  
connected to the front AV inputs or AV2 to view material playing on equipment connected to the  
rear AV inputs.  
AUDIO-R  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
L (LEFT) AUDIO Provides left audio connection.The right audio connector is usually white.  
Press TV/AVto choose the video input channel. Choose AV1 to view material playing on equipment  
connected to the front AV inputs or AV2 to view material playing on equipment connected to the  
rear AV inputs.  
VIDEO Provides composite video connection. The video connector is usually yellow.  
Press TV/AVto choose the video input channel. Choose AV1 to view material playing on equipment  
connected to the front AV inputs or AV2 to view material playing on equipment connected to the  
rear AV inputs.  
S-VIDEO IN Provides better picture quality than the standard video jack (the yellow jack) because the  
color part of the signal is separated from the black and white part of the picture. When using S-VIDEO IN,  
make sure to connect left and right audio cables to the L and R AUDIO Input jacks.  
Press TV/AVto choose the video input channel. Choose S-VIDEO to view material playing on equipment  
connected to the S-VIDEO jack.  
AUDIO/VIDEO OUTPUT Lets you connect an amplifier or audio receiver for improved soundquality.  
Press TV/AV tochoose the audio and video that is sent to the output jacks.  
SPDIF OUTPUT SPDIF Output is designed as a digital audio output (RCA OUTPUT MODE).  
RS 232 RS232 Series Port is provided for flashing new software into the digital board of your unit.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.4  
OPERATION OF REMOTE CONTROL  
1.4.1 DESCRIPTION OF REMOTE CONTROL KEYS  
LEFT- /RIGHT+ BUTTON  
Press it to enter submenus, move highlight bar  
left/right or adjust some controls.  
EXIT/SELECT BUTTON  
In ATV mode, press it to exit the on-screen  
menu directly.  
STANDBY  
ATV/DTV  
In DTV mode, press it to confirm selection.  
ATV MENU BUTTON  
Press it to display the main menu ofATV, and  
press it repeatedly to exit menu.  
DTV MENU BUTTON  
-
EXIT  
+
SELECT  
ATV MENU  
Press to display the main menu of DTV, and press  
it repeatedly to exit menu.  
DTV MENU  
+
-
-
VOL +  
P
- VOL+ BUTTON(VOLUME DOWN/UP)  
Press it todecrease or increase the volume of TV.  
- P + BUTTON(PROGRAM DOWN/UP)  
Press it todecrease or increase the current  
channel number.  
TV/AV  
PICTURE  
S.E.  
MUTE  
EPS&ESS  
DEF  
GHI  
3
ABC  
TV/AV BUTTON  
1
2
Press it toswitch between TV program and AV  
input sources  
PICTURE BUTTON  
Press it repeatedly to select picture mode among  
Mild, Normal, Dynamic and PP.  
S.E. BUTTON  
Press it repeatedly to select sound effect mode  
among PP, Music, Speech and Theatre.  
MUTE BUTTON  
Press it totemporarily turn off the sound, and to  
restore it by pressing it once again.  
EPS&ESS BUTTON  
PQR  
JKL  
MNO  
5
DBB  
ZOOM/INS.  
CAPS  
4
6
YZ  
9
VWX  
8
STU  
7
+-!  
-/--  
RECALL  
0
ESC  
NOTEBOOK  
CANCEL  
RETURN  
DISPLAY/DEL.  
INFO/HOLD  
FAVORITE  
TXT  
FAVORITE  
SLEEP  
SUBTITLE  
TIME  
PAGE UP/ REVEAL SUBCODE  
NICAM  
GUIDE/SIZE  
GAME  
Press it toselect one of the surround modes  
(OFF, Spatial Stereo and Pseudo Stereo).  
NUMBER/LETTER BUTTON  
PAGE DOWN/MIX  
CCD  
LIST  
Press it toselect channel numberdirectly, or  
press it to enter a letter, a digit or a symbol in  
some functions.  
DBB BUTTON  
Press it toturn DBB (Dynamic Bass Boost) on  
or off.  
ZOOM /INS. BUTTON  
Press it toselect the vertical size as follows:  
16:9, 4:3, 4:3 Scaling, Zoom, Subtitle mode.  
In the notebook window, press it to toggle  
between INS(insert) or OVR(overwrite) mode.  
CAPS/ESC BUTTON  
STANDBY BUTTON  
When the main power is on, press it to  
turn TV set on or off.  
ATV/DTV BUTTON  
Press it totoggle the entry mode between  
uppercase and lowercase letters, or press  
it to go back the previous menu.  
Press it to switch between ATVand DTV.  
UP /DOWN BUTTON  
Press it to move highlight bar upward or  
downward and adjust some controls.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.4.1 DESCRIPTION OF REMOTE CONTROL KEYS  
RECALL BUTTON  
In ATV mode, press it to return to the previously  
viewed channel.  
SUBTITLE BUTTON  
Press it to turn Subtitle On or Off.  
FAVORITE BUTTON  
RETURN BUTTON  
Press it to browse the favourite channelspreset  
in Favourite Channel List.This function will not  
work if you have not set any favorite channel.  
PAGE UP/REVEALBUTTON  
In DTV mode, press it to return to the previously  
viewed channel.  
-/-- / CANCEL BUTTON  
Press it to toggle between 1-digitand 2-digit  
mode before you enter the channel number.  
If you like to see a certain page which you have  
known the pagenumber, but you do not wantto  
spend time waiting for it, you can press CANCEL  
button to complete it, which will turn TELETEXT  
dispaly to TV picture.Then you can enter the  
page number you want.When the page is found,  
the page numberwill appear in the up-left corner  
of the screen.Press CANCEL button again to get  
the page immediately.  
NOTEBOOK BUTTON  
In ATV mode, directly press it to activate the  
notebook window.  
In DTV mode, if you want to open the notebook  
window, you must first press ATV MENU button  
before pressing NOTEBOOK button.  
GREEN BUTTON  
Press it to move page up in TELETEXT mode.  
This function also reveals or conceals the hidden  
4 Pages FAST TELETEXT information. Most other  
commands will conceal the information again.  
TIME/SUBCODE BUTTON  
Press it to display TELETEXT time information.  
With this function, you can also toggle the 4  
pages FAST TELETEXT between normal PAGE  
mode and subcode mode.  
GUIDE/SIZE BUTTON  
In DTV mode, press it to enter Guides submenu  
, and press it again to exit the submenu.  
In ATV mode, press it to toggle among 3 different  
series under TELETEXT mode: single height full  
page, double height top of page and double height  
bottom of page.  
SLEEP BUTTON  
Toset the sleep timer from 240 to 15 minute  
by pressing the SLEEP button repeatedly.  
Todisplay the remaining time, press SLEEP  
button once.  
Toaccess TELETEXT page corresponding  
to GREEN key.  
YELLOW BUTTON  
Toaccess TELETEXT page corresponding  
to YELLOWkey.  
Tocancel the sleep timer, press SLEEP button  
repeatedly until 0 appears.  
DISPLAY/ DEL./INFO/HOLD BUTTON  
Todisplay the current channel number&name,  
color & sound mode, press it to display the  
current time on the screen.  
Press it to remove a menu from thescreen. In  
the input field of the on-screen menus including  
Notebook, press to delete the unwantedtext.  
With this toggle command, the hold function  
can be switched on or off. When HOLD is  
STEREO / PAGE DOWN/MIX BUTTON  
Press it to change between STEREO and MONO  
sound modes.  
Press it to move page down in TELETEXT mode.  
The MIX mode results in a combined display  
of TV picture and 4 Pages FAST TELETEXT page.  
CCD BUTTON  
Your TV displays the closed caption (CCD) that  
are broadcast with some television shows, press  
it to go to the TELETEXT P801.  
switched on, the icon  
will be displayed  
on the top left corner of the screen instead of  
current page numberor subcode, and the page  
searching will stop.  
GAME/LIST BUTTON  
In ATV mode, press it to enter Game, and press  
it again to exit.  
In DTV mode, press this button to display  
detailed help information.  
TXT BUTTON  
In DTV mode, press it to display channel list  
dialog, and press it again to exit.  
Press it to activiate TELETEXT and P100  
will be displayed on the screen first.Press it  
again to go back to TV mode.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
1.4.2 INSTALLATION OF BATTERIES  
1.4.3 EFFECTIVELY USING THE  
REMOTE CONTROLLER  
Point the remote toward the infra-red remote  
sensor on the main unit.  
1. Open the battery compartment cover.  
2. Installtwo Size AA batteries in correct  
direction.  
NOTE:  
3. Closethe battery cover.  
If direct sunlight, incandescent light, or  
any other stronglight sources hitthe  
remote controller sensor, the remote  
controller may notoperate properly.  
NOTE:  
The life timeof the batteries may last up  
to one year, depending onhow often the  
remote controller isused. For thebest  
performance, the batteries should be  
replaced on ayearly basis, or when remote  
operation became erratic.  
If there isan obstacle betweenthe main  
unit and theremote controller, the remote  
controller signal maynot be received.  
Be sure to place the batteries in the correct  
direction, as shownleft.  
Do not mixold and newbatteries, or different  
types.  
Old batteries may leak chemical anddamage  
the remote controller. Always remove batteries  
as soon asthey become weak.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
2. CONNECTIONS  
2.1 ANTENNA CONNECTION  
UHF Antenna  
VHF Antenna  
75-ohm  
Coaxial Cable  
VHF/UHF  
Combination Antenna  
75 OHM  
ANTENNA INPUT  
300 to 75 ohm  
adapter  
flat twin-lead wire  
A combination antenna receives normal broadcast channels.Your connection is easy since you will  
connect the antenna to the 75 OHM ANTENNA INPUT jack on the rear of the TV.  
If your antenna has a round cable (75 ohm) on the end, then you are ready to connect it to theTV.  
Go to the next step.If your antenna has flat twin-lead wire (300 ohm), you first need to attach the  
antenna wires to the screws on a 300 to 75 ohm adapter (not supplied with your TV).  
Plug the round end of the adapter or antenna cable onto the 75 OHM ANTENNA INPUT jack on the  
rear of the TV. If the round end of the antenna cable is treaded, screw it down tight.  
Plug the TV power cord into a power outlet and turn on theTV. Refer to AUTO SEARCH to set up  
your availableTV channels.  
Note:  
If you have separate UHF andVHF antennas, you need an optional combiner to connect the antennas  
to the TV.  
2.2 CABLE TV CONNECTION  
The Cable TV signal comes directly via a 75 ohm coaxial cable, the connection is easy, using the following  
steps:  
Connect the Cable TV signal to the 75 OHM ANTENNA INPUT jack on the rear of the TV. Screw it down  
tight.  
Plug the TV s power cord into a power outlet and turn on the TV. Refer to AUTO SEARCH to set up  
your availableTV channels.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2.3 TV + VCR + DVD CONNECTION  
The basic component (VCR, DVD player etc.) toTV connection is described below. For other hookup,  
refer to your component s instruction manual.  
Connect the audio cables (white and red) to the R and L AUDIO jacks onthe TV and the Audio output  
jacks on the VCR (or other component).Match the cable color to the jack color.  
If your component has Component Output jacksYUV (Y, Cr, Cb), connect three video grade cables to  
the Y, Cr, Cb jacks on the component and to theY, Cr, Cb jacks on theTV. If your component does not  
have these jacks, go to the next step.  
If your component has an S-VIDEO jack, connect an S-VIDEO cable to the S-VIDEO jack on thefront  
of the TV and to the S-VIDEO jack on the component.If your component does not have an S-VIDEO  
jack, go to the next step.  
Connect a video cable (yellow) to the VIDEOINPUT jack on the TV and to theVIDEO OUT jack on your  
VCR (or other component).  
Turn on theTV and the component.  
Press the TV/AV button repeatedly until the correct video input channel appears in the upper right corner  
of the TV screen. For front inputs choose AV1, for rear AV inputs choose AV2 .This model has component  
jacks (Y, Cb, Cr), chooseYUV as your video input channel.  
AV INPUT1  
YUV  
INPUT  
AV  
AV  
75OHM  
ANTENNA  
INPUT  
R
L(MONO)  
AUDIO  
INPUT2 OUTPUT  
VIDEO  
S-VIDEO  
Y
VIDEO  
VIDEO  
AUDIO-L  
AUDIO-L(MONO)  
AUDIO-R  
C b  
C r  
AUDIO-L  
AUDIO-R  
Front AV input  
(AV1 INPUT)  
AUDIO-R  
Rear panel  
Under the status of DTV, repeatedly press TV/AVbutton to switch between DTV, AV1,AV2, DVD,  
SVHS mode, please see the following:  
AV1  
AV2  
DVD  
SVHS  
DTV.  
Under the status of ATV, repeatedly press TV/AVbutton to switch between TV, AV1,AV2, DVD,  
SVHS mode, please see the following:  
AV1  
AV2  
DVD  
SVHS  
TV.  
Note:  
Use either S-VIDEO jack or VIDEO INPUT1 jacks.Do not use both at the same time for the same piece  
of equipment. This would interfere with the picture display.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. ATV GENERAL OPERATION  
The following operations will beconducted in the mode of ATV.  
Picture  
Icon and the corresponding main menu  
Brightness  
Colour  
50  
50  
50  
50  
50  
Contrast  
Sharpness  
Tint  
Picture  
Clock  
Sound  
Tune  
Setup  
Picture Enhance  
Combfilter  
Color Temp.  
Picture Mode  
Middle  
On  
Normal  
PP  
MENU  
EXIT  
3.1 AUTO SEARCH  
All the active channels will be stored automatically from channel No. 1 and upward  
Tune  
Program  
Frequency  
Manual Search  
Skip  
Colour  
Name  
Auto Search  
36  
503. 25MHz  
in order.  
Off  
Auto  
Press ATV MENU button to display the on-screen menu.  
Press UP/DOWN button to select the Tune icon.  
(
)
Press RIGHT button to enter the Tune submenu.  
MENU  
EXIT  
Press UP/DOWN button to highlight Auto Search.  
Tune  
Press RIGHT button to start the auto searching, and then all available channels  
will be stored from No.1 and upward in order. Auto-searching will stop after all  
the frequency bands are searched, and the program of the first searched,  
channel 1 will show. If you want to exit auto search, just pressing EXIT or ATV  
MENU button to quit menu directly.  
Program  
Frequency  
Manual Search  
Skip  
Colour  
Name  
36  
503. 25MHz  
Off  
Auto  
(
)
Auto Search  
MENU SEARCHING... EXIT  
Note:  
When auto search is finished, sound of beep can be heard.  
3.2 MANUAL SEARCH  
Tune  
To preset the TV channel to your desired position number, manual searching  
should be used.  
Program  
Frequency  
Manual Search  
Skip  
36  
503. 25MHz  
Colour  
Name  
Auto Search  
Auto  
(
Follow above steps to enter the Tune submenu  
)
Program is highlighting, and press right button to move highlight bar right.  
Select a channel by using the number buttons, e.g. 36. .  
MENU SEARCHING...  
Press ATV MENU button to go back to the Tune submenu.  
Press UP/DOWN to select Manual Search.  
Press RIGHT button or LEFT button to start manual channel searching upward  
or downward from the current position of this channel and current frequency.  
When an available channel is searched, the searching will stop. If the searched  
channel is not as you desired, repeat the above step to search again.  
If you want to stop manual searching, press ATV MENU or EXIT button, and press  
it again to go back the previous menu.  
When you finish manual channel searching, press EXIT button to quit menu directly,  
or menu will disappear after a few seconds without further action.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. ATV GENERAL OPERATION  
3.3 FINE TUNING  
Tune  
Fine tuning function may improve the receiving quality for some weak /unstable  
channels by adjusting the channel frequency manually.  
Program  
Frequency  
Manual Search  
Skip  
Colour  
Name  
Auto Search  
36  
503. 25MHz  
Follow the above steps to enter Tune submenu.  
Auto  
(
)
Program is highlighting, and press right button to move highlight bar right.  
Select a channel by using the number buttons, e.g. 36. .  
Press ATV MENU button to go back to the Tune submenu.  
Press UP/DOWN button to select Frequency.  
MENU  
EXIT  
Press RIGHT button to enter Frequency adjustment filed.  
Press UP/DOWN button to fine tune the channel upward or downward until  
satisfied picture and sound quality are achieved.  
Press ATV MENU button to confirm and go back the previous menu.  
Press EXIT button to quit menu directly, or menu will disappear after a few  
seconds without further action.  
3.4 CHANNEL NAME SETTING  
Tune  
After storing all the available local channels into your TV set, you can use this  
function to give a name to each channel as you like. Select a channel, then  
follow the steps below:  
Program  
Frequency  
Manual Search  
Skip  
12  
503. 25MHz  
Colour  
Name  
Auto  
CCTV  
Follow the above steps to enter Tune submenu.  
Auto Search  
Program is highlighting, and press right button to move highlight bar right.  
Select a channel by using the number buttons, e.g. 36. .  
Press ATV MENU button to go back to the Tune submenu.  
Press UP/DOWN button to select Name.  
EXIT  
MENU  
Press RIGHT button to enter Name adjustment filed.  
Press CAPS button to toggle between the entry modes of uppercase and  
lowercase letters, then enter a name for the selected channel using the number  
buttons, e.g. CCTV. (Only five letters can be inputted)  
Press EXIT to quit menu directly, or menu will disappear after a few seconds  
without further action.  
3.5 CHANNEL SKIP  
You can add or erase channels from the list in the TV s memory  
Using the number buttons to select a channel you want to remove from  
or add to the channel memory, e.g. 36.  
Press ATV MENU button to display the on-screen menu.  
Press UP/DOWN to select the main menu Tune.  
Press RIGHT button to enter the Tune submenu.  
Press UP/DOWN button to select Skip.  
Tune  
Program  
Frequency  
Manual Search  
Skip  
Colour  
Name  
Auto Search  
36  
503. 25MHz  
Off  
On  
Press RIGHT button to display the features of Skip.  
Press UP/DOWN to select On or Off. If you select Off, the channel 36  
will be available when you press P+\- button to move through channels.  
Choosing On will remove the channel from the TV s memory and the  
channel will be unavailable when you press P+\- button to move through  
channels.  
(
)
MENU  
EXIT  
Press EXIT to quit menu directly, or menu will disappear after a few seconds  
without further action.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. ATV GENERAL OPERATION  
3.6 COLOUR SYSTEM SELECTION  
This feature allows you to select suitable receiving system for the specific broad  
Tune  
Program  
Frequency  
Manual Search  
Skip  
36  
-casting system in your area.  
503. 25M  
Off  
Auto  
PAL  
N3.58  
N4.43  
Press ATV MENU button to display the on-screen menu.  
Press UP/DOWN button to select the main menu Tune.  
Press RIGHT button to enter the Tune submenu.  
Colour  
Name  
Auto Search  
Press UP/DOWN button to highlight Colour.  
MENU  
EXIT  
Press RIGHT button to display the features of Colour (Auto, PAL, N3.58, N4.43)  
Press UP/DOWN button to select the desired colour system.  
Press ATV MENU button to go back to the Tune submenu.  
Press EXIT to quit menu directly, or menu will disappear after a few seconds  
without furt her action.  
Notes:  
Colour system: if Auto is selected, the respective colour system will be automatically selected according to the  
transmission system. If the reception is poor at Auto mode, select your desired colour system manually.  
3.7 PICTURE ADJUSTMENT  
Picture  
To adjust your TV picture, select a channel and follow the steps below:  
Brightness  
Colour  
50  
50  
Contrast  
Sharpness  
Tint  
Picture Enhance  
Combfilter  
Color Temp.  
Picture Mode  
50  
50  
50  
Middle  
On  
Normal  
PP  
Press ATV MENU to display the on-screen menu.  
Picture is highlighted. Press RIGHT button to enter the Picture submenu.  
Press UP/DOWN button to highlight your choice: Brightness, Colour,  
Contrast, Sharpness, Tint, Rotate.  
Press RIGHT or LEFT button to increase or decrease the element you choose.  
Press UP/DOWN to go on selecting Combfilter (or Color TEMP.).  
Press RIGHT button to display the features of Combfilter (or Color TEMP.).  
Press UP/DOWN to select On or Off for Combfilter (or set Color TEMP.  
to Standard, Cool or Warm).  
EXIT  
MENU  
Press EXIT to quit menu directly, or menu will disappear after a few  
seconds without further action.  
Notes:  
Brightness: Adjust to brighten the darkest parts of the picture.  
Colour: Adjust to add or reduce colour.  
Brightness  
50  
Contrast: Adjust the distinction between the black and white parts of the picture.  
Sharpness: Improve picture detail.  
Picture  
Tint: Obtain natural skin tones of NTSC picture. (for NTSC and YUV input, this  
feature is not selectable for other signal)  
Brightness  
Colour  
50  
50  
50  
50  
50  
On  
Contrast  
Sharpness  
Tint  
Combfilter  
Picture Enhance  
Color Temp.  
Picture Mode  
Picture Enhance: you can change video picture quality by selecting Off, Middle  
or High.  
Middle  
Combfilter: This TV set has adopted one-chip multi-standard adaptive Comb  
Filter, which provides unprecedented high resolution and vivid picture.  
Color Temp.: You can select Normal, Cool, or Warm picture preference.  
Normal will keep the whites, white; Cool will keep the whites, bluish; Warm  
will keep the whites, reddish.)  
Normal  
Warm  
Cool  
MENU  
EXIT  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. ATV GENERAL OPERATION  
3.8 PRESET PICTURE MODE  
This function enables you to choose preset video settings for different types of  
programs and viewing conditions. Most picture settings are preset at the factory  
to automatically adjust the TV s Brightness, Color, Contrast, and Sharpness.  
Picture  
Brightness  
Colour  
Contrast  
Sharpness  
Tint  
Picture Enhance  
50  
50  
50  
50  
50  
Middle  
Mild  
Normal  
Dynamic  
PP  
Press ATV MENU button to display the on-screen menu.  
Picture is highlighted, press RIGHT button to enter the Picture submenu.  
Press UP/DOWN button to highlight Picture Mode.  
Press RIGHT button to display the features of Picture Mode.  
Press UP/DOWN button to select Mild, Normal, Dynamic, or PP.  
Press EXIT button to quit menu directly, or menu will disappear after a few  
seconds without further action.  
Combfilter  
Color Temp.  
Picture Mode  
MENU  
EXIT  
Notes:  
The personal setting (PP) is what you specify with the picture adjustments as  
described on page 12. Personal is the only picture setting you can change. All  
others are set at the factory.  
3.9 SOUND ADJUSTMENT  
To adjust your TV sound, select and use the sound menu controls.  
Sound  
Press ATV MENU to display the menu.  
Press UP/DOWN to highlight Sound.  
AVL  
Loudness  
DBB  
Balance  
Equalizer  
Sound Mode  
Off  
Off  
Off  
0
Press RIGHT button to enter the Sound submenu.  
Press UP/DOWN to highlight your choice: AVL, or Loudness,  
DBB, Balance, or Equalizer.  
PP  
MENU  
EXIT  
Press RIGHT button to display the features of your choice, e.g. AVL.  
Press UP/DOWN to select On or Off for AVL.  
Press EXIT to quit menu directly, or menu will disappear after a few  
seconds without further action.  
Sound  
AVL  
Loudness  
DBB  
Balance  
Equalizer  
Sound Mode  
Off  
On  
Off  
0
Notes:  
PP  
AVL: to turn AVL on or off. When On, AVL will level out the sound being  
heard when sudden changes in volume occur during commercial breaks  
or channel changes.  
MENU  
EXIT  
DBB: Adjust to turn DBB function on or off.  
Balance: To adjust the level of sound coming from the left and right speakers  
Equalizer: User can use this function to set desired sound tone.  
3.10 EQUALISER SELECTION  
You can enterEqualiser to adjustthe sound toyour desired level.  
Press ATV MENU todisplay the on-screen menu.  
Press UP/DOWN button to select Sound.  
Equaliser  
Adjust  
Reset  
Press RIGHTbutton to enter the Soundsubmenu.  
Press UP/DOWN buton to highlight Equaliser.  
Press RIGHTbutton to display the features of Equaliser.  
Press RIGHTbutton to select the frequencyyou want to  
adjust: 100HZ, 300HZ, 1KHZ, 3KHZand 8KHZ.  
Press UP/DOWN button to adjust thesetting to your desired level.  
Press ATV MENU togo back to the previous menu.Press UP/DOWN  
button to highlight Reset. Then all of the levels will be set to50%  
automatically.  
100  
300  
1K  
3K  
8K  
MENU  
EXIT  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. ATV GENERAL OPERATION  
3.11 SOUND MODE SELECTION  
You can preset sound mode that best suits your current programming among  
Sound  
PP, Music, Theatre or Speech.  
AVL  
Loudness  
DBB  
Balance  
Equalizer  
Sound Mode  
Off  
On  
Off  
0
Press ATV MENU to display the on-screen menu.  
Press UP/DOWN button to select Sound.  
PP  
Press RIGHT button to enter the Sound submenu.  
Press UP/DOWN button to select Sound Mode, press RIGHT button to display  
the features of Sound Mode.  
Music  
Speech  
Theatre  
MENU  
Press UP/DOWN to select PP, Music, Speech or Theatre.  
Press EXIT to quit menu directly, or menu will disappear after a few seconds  
without further action.  
4. TIMER FUNCTION  
4.1 CLOCK  
Follow these steps to set the clock.  
CLOCK  
Clock  
- -  
:
- -  
- -  
- -  
Press ATV MENU button to display the on-screen menu.  
Press UP/DOWN button to select CLOCK icon.  
Off Time  
Off Time  
On Time  
On Time  
On PRO.  
OFF  
- -  
OFF  
- -  
1
:
:
Press RIGHT button to enter the CLOCK submenu.  
Press UP/DOWN to highlight Clock.  
Press RIGHT button to highlight hour position in red, then use the number  
buttons or UP/DOWN button to set the hour.  
MENU  
0..9  
EXIT  
Press RIGHT button to highlight minute position in red, then use the number  
buttons or UP/DOWN button to set the minute.  
Press EXIT to quit menu directly, or menu will disappear after a few seconds  
without further action.  
4.2 ON-TIMER  
To turn on the TV to a specific channel at a specific time, use the On-Timer. Before  
CLOCK  
you begin, set the clock correctly.  
Clock  
- -  
OFF  
- -  
OFF  
:
- -  
Off Time  
Off Time  
On Time  
On Time  
ON PRO.  
:
- -  
- -  
Press ATV MENU to display the on-screen menu.  
- -  
1
:
Press UP/DOWN to select the CLOCK icon.  
Press RIGHT button to enter the CLOCK submenu.  
Press UP/DOWN to highlight ON PRO.  
MENU  
0..9 -/- -  
EXIT  
Press number buttons (or UP/DOWN button) to enter a channel number.  
This will be the channel to which the TV turns on at the specified time.  
Press UP/DOWN button to select the first ON TIME.  
CLOCK  
CLOCK  
- -  
OFF  
:
- -  
- -  
Press RIGHT button to display the features of On Time. Then press  
UP/DOWN button to select Off, Once or Daily.  
OFF TIME  
OFF TIME  
ON TIME  
ON TIME  
ON PROG  
- -  
Off  
:
Once  
Daily  
(If you select Once, the timer will turn on the TV one time within the next 24  
hours only. If you select Daily, the timer will turn on the TV at the same time  
and to the same channel every day. Choose Off to cancel the On-timer, and it  
is not available to set On-time in off mode.)  
- -  
:
- -  
EXIT  
MENU  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. TIMER FUNCTION  
Press ATV MENU button to go back to the submenu of Timer. Then press  
UP/DOWN button to select ON TIME.  
Press RIGHT button to highlight hour position in red, then use the number  
buttons or UP/DOWN buttons to set the hour.  
Press RIGHT button to highlight minute position in red, then use the number  
buttons or UP/DOWN buttons to set the minute.  
Press EXIT to quit menu directly, or menu will disappear after a few seconds  
without further action.  
4.3 OFF-TIMER  
To turn off the TV at a specific time every day, use the Off-imer. Before you begin,  
you must set the clock correctly.  
CLOCK  
CLOCK  
- -  
Off  
Once  
Daily  
- -  
1
:
- -  
OFF TIME  
OFF TIME  
ON TIME  
ON TIME  
ON PROG  
Press ATV MENU button to display the on-screen menu.  
:
- -  
Press UP/DOWN button to select the CLOCK icon..  
Press RIGHT button to enter the CLOCK submenu.  
Press UP/DOWN button to highlight the first OFF TIME.  
MENU  
EXIT  
Press RIGHT button to display the featuresof the Off Time.Then  
press UP/DOWN to selectOff, Once or Daily.  
(If you select Once, the timer will turn off theTV once.If you select  
Daily, the timer will turn off theTV at the same time every day.Choose  
Off to cancel the Off-timer, and it is notavailable to setOff-time in off  
mode.)  
Press ATV MENU button to go back to the submenu of Timer. Then press  
UP/DOWN button to select OFF TIME..  
Press RIGHT button to highlight hour position in red, then use the  
number buttons or UP/DOWN buttons to set the hour.  
Press RIGHT button to highlight minute position in red, then use the  
number buttons or UP/DOWN buttons to set the minute.  
Press EXIT button to quit menu directly, or menu will disappearafter a  
few seconds without further action.  
5. SPECIAL FUNCTION  
5.1 SVM SETTING  
This function (Scan Velocity Modulation) enables you to improve the  
picture quality.  
Setup  
SVM  
Blue Bac+k  
Rotate  
Off  
Weak  
Strong  
Parent Guide  
Game  
Calendar  
Favorite  
Press ATV MENU to display the on-screen menu.  
Press UP/DOWN button to select Setup.  
Press RIGHT button to enter the Setup submenu.  
Highlight SVM with UP/DOWN button and then press RIGHT button  
to display the features of SVM.  
PRO. Swap  
MENU  
EXIT  
Press UP/DOWN to set SVM to Off, Weak or Strong mode.  
Press EXIT to quit menu, or menu will disappear after a few seconds  
without any further action.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. SPECIAL FUNCTION  
5.2 BLUE BACK SETTING  
If this function is set to On mode, it will display a solid blue screen when a channel  
is selected that has no signal.  
Setup  
SVM  
Blue Back  
Rotate  
Parent Guide  
Game  
Off  
Off  
On  
Press ATV MENU button to display the menu.  
Press UP/DOWN button to select Setup.  
Calendar  
Favorite  
Press RIGHT button to enter the Setup submenu.  
Press UP/DOWN down to select Blue Back.  
PRO. Swap  
MENU  
Press RIGHT button to display the features of Blue Back.  
Press UP/DOWN button to set Blue Back to On or Off mode.  
Press EXIT button to quit menu directly, or menu will disappear after a few  
seconds without further action.  
EXIT  
5.3 GEOMAGNATIC CORRECTION  
Due to thegeomagnatic effect, the picture willslant horizontally.You  
can adjust itas follows:  
Press ATV MENU todisplay the on-screen menu.  
Press UP/DOWN button to select Setup.  
Setup  
SVM  
Blue Back  
Rotate  
Parent Guide  
Game  
Off  
On  
0
Calendar  
Favorite  
Press RIGHT button to enterthe Setup submenu.  
Press UP/DOWN button to select Rotate.  
Press RIGHT button to adjustthe gradient of the pictureuntil you get  
the satisfied display.  
PRO. Swap  
MENU  
EXIT  
Press EXIT toquit menu, ormenu will disappearafter a few seconds  
without any further action.  
5.4 FAVORITE CHANNEL SETTING  
Setup  
You can store five channels you prefer into the Favorite List and recall these  
channels easily by pressing the FAVOURITE button on the remote control.  
Press ATV MENU button to display the on-screen menu.  
Press UP/DOWN button to select the main menu Setup.  
SVM  
Blue Back  
Rotate  
Parent Guide  
Game  
Off  
Off  
0
Calendar  
Favorite  
PRO. Swap  
MENU  
Press RIGHT button to enter the Setup submenu.  
EXIT  
Press UP/DOWN button to select Favorite.  
FAVORITE  
Press RIGHT button to display the features of Favorite.  
- -  
- -  
- -  
- -  
- -  
FAV.  
FAV.  
FAV.  
FAV.  
FAV.  
1
2
3
4
5
Press UP/DOWN button to FAV.1 (or FAV.2, FAV.3, FAV.4, FAV.5), then  
press RIGHT button to enter the channel number input filed.  
Press the -/-- to select the 1-digit or 2-digit channel number, then input the  
channel number using the number buttons. You can delete the unwanted digit  
with DISPLAY/DEL button and reset the favorite channel number again.  
Press EXIT button to quit menu directly, or menu will disappear after a few  
seconds without further action.  
MENU  
EXIT  
5.5 TETRIS GAME  
Tetris is deceptively simple, yet, completely addictive. Small shapes called Tetraminoes fall from the top of  
the Playfield to the bottom. Players must rotate the Tetraminoes as they fall, and fit them together to complete  
lines. When the player fills an entire line with blocks, that line is removed from the screen. If the player cannot  
complete lines, the blocks will eventually rise past the top of the screen and the game ends.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. SPECIAL FUNCTION  
Press ATV MENU to display the on-screen menu.  
Press UP/DOWN button to highlight Setup icon.  
Press RIGHT button to enter the Setup submenu.  
Press UP/DOWN button to highlight Game.  
Setup  
SVM  
Blue Back  
Rotate  
Parent Guide  
Game  
Off  
Off  
0
Calendar  
Favorite  
Press RIGHT button to enter Game directly.  
PRO. Swap  
MENU  
Play game with UP/DOWN button and LEFT/RIGHT button.  
Press EXIT to quit menu directly, or menu will disappear after a few  
seconds without further action.  
EXIT  
Note: 1. Do not play game in Zoom or Subtitle mode.  
2. When the button is pressed, sound of beep can be heard.  
3. The game is not available under DTV mode.  
Setup  
5.6 CALENDAR  
SVM  
Blue Back  
Rotate  
Parent Guide  
Game  
Calendar  
Favorite  
PRO. Swap  
Off  
Off  
0
This feature enables you look up date easily.  
Press ATV MENU to display the on-screen menu.  
Press UP/DOWN to highlight Setup.  
Press RIGHT button to enter the Setup submenu.  
Press UP/DOWN button to highlight Calendar.  
MENU  
EXIT  
Calendar  
Press RIGHT button to display the features of Calendar.  
Press RIGHT button to select year position (or month, day).  
Press UP/DOWN button to select the desired year (month, or day).  
Press EXIT to quit menu directly, or menu will disappear after a few  
seconds without further action.  
MENU  
EXIT  
5.7 PARENTAL GUIDE  
Using this function, you can lock the channels you think inappropriate  
for children to watch.If you want to lock the channels, you must enter  
the password firstly.  
Press ATV MENU to display the on-screen menu.  
Press UP/DOWN to select the main menu Setup.  
Press RIGHT to enter the Setup submenu.  
Setup  
SVM  
Blue Back  
Rotate  
Parent Guide  
Game  
Off  
Off  
0
- - - -  
Calendar  
Favorite  
PRO. Swap  
MENU  
Press UP/DOWN to select Parent Guide.  
EXIT  
Press RIGHT to highlight the password position anduse number  
buttons to enter a password (0000 isthe default code of the TV).  
Then the features of Parental Guide are displayed on the screen.  
Press UP/DOWN to select the first Channel Lock, then press RIGHT/  
LEFT to select Disable or Enable. If Enable is highligted,  
Frequency, Manual Search& Auto Search in Tunemenu will be  
unable to use.  
Parent Guide  
Channel Lock  
Program  
Channel Lock  
Child Lock  
Change PWD  
Disable  
8
Off  
Off  
MENU  
EXIT  
Note: You can use the smart code 5898 to enter the Parent Guide  
menu instead of the default code 0000 or the new password you  
have set.  
Parent Guide  
Channel Lock  
Program  
Channel Lock  
Child Lock  
Change PWD  
Disable  
8
Off  
On  
If you want to lock a program, following the steps below:  
Press UP/DOWN to select Program, and then enter a channel number  
with number buttons eg. 8. This is the channel you want to lock.  
Press ATV MENU to go back to the previous menu, andthen press UP/  
DOWN button to select the second Channel Lock.  
MENU  
EXIT  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. SPECIAL FUNCTION  
Press RIGHT todisplay the features of Channel Lock and then  
press UP/DOWN to select Onor Off.When On is selected, itmeans  
you want to lock this channel. Repeat the above steps to set other  
channels you want to lock.  
Parent Guide  
Channel Lock  
Program  
Channel Lock  
Child Lock  
Change PWD  
Disable  
Enable  
Off  
Off  
Press ATV MENU togo back to the previous menu, andthen press  
UP/DOWN to select the firstChannel Lock.  
Press RIGHT todisplay the features of Channel Lock and then  
press UP/DOWN to select Disable or Enable. When Enableis  
selected, all thechannels you select to belocked will be enabled.  
MENU  
EXIT  
If you wantto prevent thechildren against allchannels, go on  
with the followingsteps:  
Press ATV MENU togo back to the previous menu, andthen press  
UP/DOWN to highlight Child Lock.  
Parent Guide  
Channel Lock  
Program  
Channel Lock  
Child Lock  
Change PWD  
Disable  
8
Off  
Off  
On  
Press RIGHT todisplay the features of Child Lock and then press  
UP/DOWN to select On orOff. When On is selected, thebuttons on  
the front panelof the TV will bedisabled.  
MENU  
EXIT  
When turning on the TV, INPUT PASSWORD appears on the screen.  
One has toinput the password, then allbuttons become active  
again.  
Change Password  
If you wantto change thepassword, go onwith the following  
steps:  
New PWD  
Confirm  
- - - -  
- - - -  
Press ATV MENU togo back to the previous menu, andthen press  
UP/DOWN to select Change PWD.  
Press RIGHT andthen New PWD.is highlighted. Use the number  
buttons to enter a new password and finally enterthe same digit  
again to confirm.  
MENU  
EXIT  
5.8 NOTEBOOK  
This feature enables you to store personalmessages.  
Press NOTEBOOK button to display Notebook window directly.  
Press CAPS button to togglethe entry mode between uppercase  
or lowercase letters.  
Notebook  
F
Use number buttons to enterletters, numbers or some special  
symbols.  
Press DISPLAY/DEL button to delete theunwanted text.  
Press ZOOM/INS button to selectINS(INSERT) or OVR(OVERITE)  
on the screenand then usenumber buttons to insert or overwrite  
the letter ornumber in thetext.  
-- : --  
OVR CAPS  
MESSAGE OFF  
Press UP/DOWN button to select MESSAGE, and then press  
LEFT/RIGHT button to select ONor OFF. Ifyou select ON, the  
Notebook window with the storedmessage will bedisplayed on the  
screen first whenthe TV is turned on.Meanwhile, you can hear the  
sound of beep.  
If you want to display the message at aspecified time, go on selecting  
--:--, enter thetime using LEFT/RIGHTbutton, e.g.7:30, meanwhile,  
message should beselected on, thenset MESSAGE to ON. It means  
that the Notebookwindow with the stored messagewill be automatically  
displayed on the screen at7:30. Meanwhile, you can hear thesound of  
beep.  
Note: This functionis not availableunder DTV mode.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. SPECIAL FUNCTION  
5.9 PROGRAM SWAP  
Setup  
After the autoor manual search, you may want to rearrange the  
program numbers in which thechannels are stored.In this case,  
program swapfunction may be useful toyou.  
SVM  
Blue Back  
Rotate  
Parent Guide  
Game  
Off  
Off  
0
Press ATV MENU todisplay the on-screen menu.  
Press UP/DOWN button to select the Setupicon.  
Press RIGHT button to enterthe Setup submenu.  
Press UP/DOWN button to select PRO.Swap.  
Calendar  
Favorite  
PRO. Swap  
MENU  
EXIT  
Press RIGHT button to enterPRO. Swap.  
Press UP/ DOWN button to select Program 1, thenpress RIGHT  
.
button to highlight the program number positionand use number  
buttons to enter the program number, e.g. 30. Usethe same  
method to enterthe program number in thenext line, e.g. 20. That  
means these twoprograms will be switched.  
PRO. Swap  
Program1  
30  
20  
Program2  
Swap  
Then press the UP/DOWN button to select Swap and press RIGHT  
to finish thesetting.  
MENU  
EXIT  
If you want to set other channel, follow the above procedure.  
Press EXIT toquit menu, ormenu will disappearafter a few seconds  
without any further action  
6. DTV OPERATION  
After your TV waspowered on, you can enter DTV modeby pressing  
ATV/DTVbutton.  
6.1 LANGUAGE SETTING  
Main Menu  
Channel List  
Favourites  
The default settings of the OSD language, audio language or subtitle  
language are all English, you can adjust the language of your TV as  
English, German, French , Italian or Spanish, follow these steps to  
conduct language settings:  
Guides  
Settings  
Press DTV MENU button to display Main Menu as figure1.  
Press UP or DOWN button to highlight the Settings submenu, and  
press SELECT button to access, please see figure2.  
Figure1  
Settings  
Configuration  
Language  
Press UP or DOWN button to highlight Language and press SELECT  
button to display the features of the Language submenu.  
Press UP or DOWN button to highlight Preferred and enter its submenu  
by pressing SELECT button.  
Installation  
Press UP or DOWN button to highlight Audio Language and display its  
features by pressing SELECT or Right button, please see figure3.  
Press UP or DOWN button to highlight your preferred audio language,  
such as English, and select it by pressing SELECT button.  
Follow the above same steps to select your preferred subtitle language.  
Current language is the language to be used for the current selected  
channel, only language available with currently selected channel will be  
displayed .  
Figure2  
Language Setting  
Preferred  
Change  
-Audio Language  
-Subtitle Language  
English  
German  
French  
Italian  
ABCT
V
Spanish  
Select  
i
Change Preferred Audio/Subtitle  
More  
Press ESC button to quit current menu and go back its previous menu,  
or press DTV MENU button directly to exit main menu.  
Figure3  
i
More  
Note:  
at the bottom right of the Figure3 means getting more information by pressing  
INFO button. When the dialog of detailed information is displayed in the bottom of  
screen, the dialog will be vertically zoomed in by pressing SELECT button, and the  
dialog will exit by pressing the button again.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. DTV OPERATION  
6.2 CHANNEL SETTING  
6.2.1 AUTOSEARCH  
Automatic search isprovided to scaneach channel forservices,  
follow these steps to perform auto search channel:  
Installation  
Automatic Search  
Manual Search  
First Time Installation  
Figure4  
Highlight the Settings in Main Menu and press SELECT button to  
access.  
Press UP or DOWN button to highlight Installation and press SELECT  
button to display the features of the Installation submenu, please see  
figure 4.  
Do you want to start automatic search? Your  
previous channel list will be replaced.  
Press UP or DOWN button to highlight Automatic Search and press  
SELECT button to display the dialog as right, figure5.  
Yes  
No  
Figure 5  
Select Yes by pressing SELECT button to start automatic search, please  
see figure6.  
Automatic Search  
If selecting No, it will exit all menus and go back to the program playing.  
If you want to cancel the ongoing auto search, press DTV MENU button.  
When automatic search finished, your TV will go back to the programme  
that has been just searched.  
Searching channel: 350. Please wait. This will takea few minutes.  
0%  
100%  
MENU Cancel  
Figure6  
Note: In DTVmode, you cannot search programfrom analog signal, but you can  
conduct some settingsdistributed in theOSD of analogparts, such asPicture,  
Contrast, Brightness, etc.  
6.2.2 MANUAL SEARCH  
Manual search isprovided to allow the userto scan anindividual  
channel for services, follow these steps toperform manual search:  
Installation  
Automatic Search  
Highlight the Settings in Main Menu, and press SELECT button to  
Manual Search  
access.  
Press UP or DOWN button to highlight Installation and press SELECT  
button to display the features of the Installation submenu.  
Press UP or DOWN button to highlight Manual Search, next press  
SELECT button to enter Manual Search dialog, then press LEFT or  
RIGHT button to select a channel to search, finally press SELECT  
button to search the channel, see figure8.  
First Time Installation  
Figure7  
Manual Search  
Channel Number:  
56  
When an available channel is searched, the searching will stop, and  
your TV will go into the mode of the searched channel playing.  
Signal Quality: None  
Signal Lever  
SELECT  
MENU Exit  
More  
Select Channel  
Search  
i
When the selected channel is not available, the dialog  
No channels  
Figure8  
found on the selected channel  
will appear on the screen, press  
SELECT button to go back to watch TV.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. DTV OPERATION  
6.2.3 FIRST TIME INSTALLATION  
When your TV is first switched on, the TV will configureitself  
for the first time, this is called"First Time Installation", or you  
can also follow below steps to setFirst Time Installation:  
Installation  
Automatic Search  
Manual Search  
Highlight the Settings in Main Menu and press SELECT to access.  
Press UP or DOWN to highlight Installation and press SELECT button  
to display the features of the Installation submenu.  
First Time Installation  
Figure9  
Press UP or DOWN button to highlight First Time Installation, next  
press SELECT button to enter the dialog as figure 10.  
Are you sure you want to delete all channels  
and setting for first time installation?  
Move hightlight bar toYes and press SELECT button to display the  
dialog as figure 11, select Yes by pressing SELECT button to start  
automatic search. If you move RIGHT button to select No, yourTV  
will exit all menus and go back to program playing.After you selected  
Yes, all existing settings will be deleted.  
Yes  
No  
Figure10  
Do you want to start automatic search?  
Yes  
No  
Figure11  
6.3 CONFIGURATION  
This feature enables you to configure your TV system as amode  
that you desired.  
6.3.1 TIME ZONE  
Settings  
NSW/ACT, NT, QLD, SA, TAS, VIC and WA, seven types of time  
zones, are provided to you to select, follow these steps below to  
set a Time Zone thatyou want:  
Configuration  
Language  
Highlight the Settings in Main Menu and press SELECT button to  
access, figure12.  
Installation  
Figure12  
Press UP or DOWN button to highlight Configuration and press  
SELECT button to display the features of the Configuration submenu,  
please see figure13.  
Configuration  
NSW/ACT  
Time Zone  
Subtitle  
On  
Off  
Favourite Mode  
Channel List  
Show all  
Press UP or DOWN button to highlight Time Zone and start selecting  
a kind of time zone by repeatedly pressing LEFT or RIGHT button.  
Press ESC to quit current menu and go back its previous menu,  
or press DTV MENU directly to exit main menu.  
Password Setting  
Version: HW768.256_SW1.1.16  
31
ABCT
V
Change Time Zone  
i
More  
Figure13  
6.3.2 SUBTITLE  
Subtitles can beenabled or disabled using the Subtitle key on the  
remote control, orthrough dialog provided in theConfiguration  
item of Settingssubmenu in MainMenu. In Configuration dialog,  
follow these steps below to set your TV subtitle:  
Configuration  
NSW/ACT  
On  
Time Zone  
Subtitle  
Favourite Mode  
Off  
Channel List  
Show all  
Highlight the Settings in Main Menu and press SELECT button to access.  
Press UP or DOWN button to highlight Configuration and press SELECT  
button to display the features of the Configuration submenu.  
Press UP or DOWN button to highlight Subtitle and changing Subtitle  
into On or Off by repeatedly pressing LEFT or RIGHT button, please see  
figure14.  
Password Setting  
Version: HW768.256_SW1.1.16  
1
ABCT
V
i
More  
Change Default Subtitle  
Figure14  
Press ESC button to quit current menu and go back its previous menu,  
or press DTV MENU directly to exit main menu.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. DTV OPERATION  
6.3.3 FAVOURITE MODE  
The favourite mode can be enabled or disabled from the Configuration  
of Settings, or you can also enable or disable the modeby repeatedly  
pressing FAVOURITEbutton on the remote control.After selecting a  
favourite mode, you can quickly switch between some different favourite  
channels that belongto the samefavourite listthrough pressing P+or-  
:
button. The TV allows you to have up to five different favourites lists,  
follow these steps below to select favourite mode:  
Highlight the Settings in Main Menu and press SELECT button to access.  
Press UP or DOWN button to highlight Configuration and press SELECT  
to display the features of the Configuration submenu.  
Configuration  
NSW/ACT  
On  
Time Zone  
Subtitle  
Favourtite Mode  
Off  
Press UP or DOWN button to highlight FAVOURITE MODE and display  
a kind of favourite mode by repeatedly pressing LEFT or RIGHT button,  
then press SELECT button to confirm, please see figure15. If no favourite  
channels have been set in a favourite list, please go to Edit Favourite Lists  
to set favourites in Favourites submenu, please refer to 6.4.4 Favourite Lists  
for more detail.  
Show all  
Channel List  
Password Setting  
31
ABCT
V
Version: HW768.256_SW1.1.16  
Change Favourite Mode  
i
More  
Figure15  
Press ESC to quit current menu and go back its previous menu, or press  
DTV MENU directly to exit main menu.  
6.3.4 CHANNEL LIST MODE  
You can configure this TV to use exclusive TV, Radio or Text  
services, this feature is known as Channel List Mode.When the  
channel list mode is enabled, the P+ or- buttons on the remote  
control will only select those services in the current Channel List  
Mode. You can select a kind of channel list mode in Configuration  
dialog, follow these steps toset Channel List Mode:  
Highlight the Settings in Main Menu and press SELECT button to access.  
Press UP or DOWN button to highlight Configuration and press SELECT  
to display the features of the Configuration submenu.  
Configuration  
NSW/ACT  
Time Zone  
Subtitle  
On  
Favourite Mode  
Off  
Press UP or DOWN button to highlight Channel List, and repeatedly  
pressing LEFT or RIGHT button to display a kind of channel list mode,  
such as Show all, then press SELECT to confirm. The channel list mode  
cannot be selected if there are no services available.  
Channel List  
Show all  
Password Setting  
1
ABCT
V
Version: HW768.256_SW1.1.16  
i
More  
Change Channel List  
Figure16  
Press ESC to quit current menu and go back its previous menu, or press  
DTV MENU directly to exit main menu.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. DTV OPERATION  
6.3.5 PASSWORD SETTINGS  
This feature allows you to lock Main Menu, Installation.When  
the above services are locked, it is impossible to accessto  
the service without entering password, follow these steps  
below to lock the above menus:  
Highlight the Settings in Main Menu, and press SELECT button to  
access.  
Configuration  
NSW/ACT  
Time Zone  
Subtitle  
On  
Press UP or DOWN button to highlight Configuration and press  
SELECT to display the features of the Configuration submenu.  
Press UP or DOWN button to highlight Password Settings, and press  
SELECT button to display the dialog as figure17.  
Favourite Mode  
Off  
Channel List  
Show all  
Enter Lock Key  
Password Setting  
ABCT
V
Version: HW768.256_S
SELECT Enter  
Type Key  
MENU  
Cancel  
0
9
i
More  
Use the digit button to enter a password in the dialog, the default  
password of the lock key is 0000.After inputting the password, press  
SELECT button to enter the dialog as figure18. If user has forgot  
password that was previously set, the password can be reset to "0000"  
by implementing First Time Installation in main menu.  
Figure17  
Configuration  
NSW/ACT  
Time Zone  
Subtitle  
On  
Favourite Mode  
Off  
Channel List  
Show all  
Password Setting  
Version: HW768.256_SW1.1.16  
Press UP or DOWN button to highlight Menu Lock, then press LEFT  
or RIGHT button to select Installation.  
1
Disabled  
ABCT
V
Menu Lock  
Set Lock Key  
MENU  
Exit  
i
More  
Press UP or DOWN button to highlight Set Lock Key, then input a new  
password by using digit button on the remote control to lock the Installation  
menu.You must be very careful when you perform the operation, because  
once you forgot the new password, you can not reset it by performing First  
Time Installation. Follow the above steps to lock Main Menu.  
Press ESC to quit current menu and go back its previous menu, or press DTV  
MENU directly to exit main menu.  
Figure18  
Warning:  
When inputting new password in Set Lock Key highlight bar, you must  
keep a very good memory. Once you forgot the password of Installation  
Menu or Main Menu, you will no longer be able to reset the password with  
attempting to perform First Time Installation. Certainly, you can not enter  
Main Menu or Installation Menu without the password, so you must be very  
prudent when inputting a new password.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. DTV OPERATION  
6.4 CHANNEL LIST  
This feature enables you to delete anunwanted channel, edit  
channel name, lock any inappropriate channel, etc.  
Main Menu  
Channel List  
Favourites  
6.4.1 DELETE CHANNEL  
Guides  
Todelete an unwanted channel, follow these steps below:  
Settings  
Highlight Channel List in Main Menu, and press SELECT buttons to  
display the dialog of the Channel List.  
Figure19  
Channel List  
Press UP or DOWN button to select an unwanted channel.  
Press LEFT or Right buttons to highlight Delete, and press SELECT  
button to display a dialog as figure20.  
1. ABC TV  
2. ABC TWO  
The selected service will be permanently deleted,  
and favourite list will be turned off.Are you sure?  
Move hightlight bar toYes and press SELECT button to delete the  
unwanted channel.  
Yes  
Delete  
Function  
No  
Lock  
Select  
Edit Name  
Favourite  
Select Channel Select Delete  
i
More  
Press ESC to quit current menu and go back its previous menu,  
or press DTV MENU directly to exit main menu.  
Figure20  
6.4.2 EDIT CHANNEL NAME  
Tochange or editan existing channel name, follow these steps below:  
:
Highlight Channel List in Main Menu, and press SELECT buttons to  
display the dialog of the Channel List.  
Channel List  
1. ABC TV  
2. ABC TWO  
Press UP or DOWN button to select an existing channel.  
Press LEFT or Right buttons to highlight Edit Name, and press SELECT  
button to enter the channel editing dialog, please see figure21.  
Repeatedly press digit/letter buttons or UP/ DOWN button to edit the  
channel name, and press SELECT button to confirm.  
31
ABCT
V
[A]BC TV  
Select  
Delete  
Edit Name  
Favourite  
Lock  
Update  
Menu Cancel  
Enter Name Select  
i
More  
Figure21  
Press ESC to quit current menu and go back its previous menu,  
or press DTV MENU directly to exit main menu.  
6.4.3 LOCK CHANNEL  
You can seta password to lock a channel beingunfit for children  
to watch in Channel Listdialog, follow below steps to lock an  
unwanted channel:  
Channel List  
1. ABC TV  
2. ABC TWO  
Enter Lock Key  
Highlight Channel List in Main Menu, and press SELECT button to  
display the dialog of the Channel List.  
ABCT
V
Select  
Delete  
Edit Name  
Lock  
Favourite  
More  
Press LEFT or Right buttons to highlight Lock, and press SELECT  
button to display the Enter Lock Key dialog as figure22.  
Use the digit buttons on the remote control to input the password of  
lock (the default code of lock is 0000) in the above dialog to enter the  
lock mode dialog as figure23.This password is the same as the  
password of Password Settings.  
Menu Cancel  
Enter Key  
i
Figure22  
Channel List  
1. ABC TV  
2. ABC TWO  
31
ABCT
V
Press UP or DOWN button to highlight a channel, and repeatedly  
press SELECT button to lock or unlock the channel.  
Select  
Delete  
Edit Name  
Lock  
Favourite  
More  
Menu Exit  
Select Channel  
Select Lock/Unlock  
i
Press ESC to quit current menu and go back its previous menu,  
or press DTV MENU directly to exit main menu.  
Figure23  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. DTV OPERATION  
6.4.4 FAVOURITES LIST  
This feature enables you to quickly select a listof channels you  
consider favourite, the TV allows you to have up to five different  
favourites lists. EditFavourtie Listsdialog can beaccessed not  
only by selecting the Favourites on the Channel Listdialog, but  
also by selecting Favourites in Main Menu, followthese steps  
below to edit favourite lists in Channel List dialog.  
Channel List  
1. ABC TV  
2. ABC TWO  
1
ABCT
V
Highlight Channel List in Main Menu, and press SELECT button to  
display the dialog of the Channel List.  
Select  
Delete  
Edit Name  
Favourite  
More  
Lock  
Function  
Select Channel Select Enter  
i
Figure24  
Press LEFT or RIGHT buttons to highlight Favuourites in the dialog,  
and press SELECT button to enter Edit Favourtite Lists dialog.  
Press UP or DOWN button to highlight a channel, then press LEFT or  
RIGHT button to highlight a list, next press SELECT button to add the  
highlighted channel to the highlighted favourite list.If you want to  
remove the channel from the favourite list, please press SELECT button  
again, please see figure25.  
Edit Favourite Lists  
1. ABC TV  
3
2. ABC TWO  
1
ABCT
V
List1  
List2  
List3  
Select Channel Select Add/Remove  
List4  
List5  
More  
Select List  
i
Press ESC to quit current menu and go back its previous menu, or press  
DTV MENU directly to exit main menu.  
Figure25  
6.5 ELECTRONIC PROGRAM GUIDE(EPG)  
This EPG feature contains twoaspects, one is Now/Next EPG,  
the other is List Schedule EPG.An Now/Next EPG dialog is  
provided that allows you to view the current and next programme  
playing on each service, follow these steps to enter the dialog:  
Guides  
Now/Next EPG  
List Schedule EPG  
Press UP or DOWN button in Main Menuto highlight Guides.  
Press SELECT button to display the features of Guides, or you  
can also display the features by directly pressing Guide button.  
Press SELECT button again to enter Now/Next EPG dialog as  
figure27.  
Figure26  
Electronic Programme Guide  
15:20-15:25  
ABC TV  
[News/CA] National and International  
news from the ABC. Followed by Play  
School.  
In this dialoga list ofchannels and thecorresponding current and  
next program are displayed, you can navigate up and down the list  
of channels by pressing UPor DOWN button and highlight either  
the now or next programme.  
1
ABCT
V
Current Event  
Channels  
Next Event  
Play School  
ABC News  
1.ABC TV  
2.ABC TWO  
The Hoobs  
Australia Wide  
Schedule  
Select Watch  
More  
Navigate  
i
Information for the highlighted programme is displayed in the box  
to the leftof the video. This information includesthe start/end  
time of theprogramme, the programme genre in brackets, and a  
synopsis of theprogramme content.You may select a highlighted  
program in the Current Event list towatch by pressing SELECT  
button.  
Figure27  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. DTV OPERATION  
An List Schedule EPG dialog is provided that presents some  
extended schedule EPG information, eitheron a banner for  
the current service, or as a full screen dialog showing multiple  
services, follow these steps below to enter the dialog:  
Guides  
Now/Next EPG  
Move the hightlight bar until List Schedule EPG in Guides  
submenu, and pressSELECT button to enter thedialog as  
figure29.  
List Schedule EPG  
Figure28  
Press ESC to quit current menuand go back its previous  
menu, or pressDTV MENU directly to exit main menu.  
Electronic Programme Guide  
Wed 19/11, 15:24  
Wed 19/11, 15:00-17:00  
ABC TV  
14:35 Something in the air  
15:20 Play School  
15:25 Balamory  
15:45 Arthur  
15:55 Little Lulu  
1. ABC TV  
In this dialog, the leftmost list displays all available services, the  
current selected service is displayed in the title bar of the list. The  
rightmost list displays two hoursof schedule information for the  
currently selected service, its title shows the time span covered by  
the list. You can navigate between thetwo lists tochange the  
selected service or the highlighted programme by pressing  
LEFT/RIGHT buttons, and you can also change the time span of the  
schedule information displayed for a channel by either twohours or  
an entire day through pressing RED/GREEN button or YELLOW/BLUE  
button on the remote control.  
2. ABC TWO  
16:10 Get Your Own Back  
16:35 That's Genius!  
Something in the air  
14:35:15:20  
[Entertainment] Under Wraps: Whena phial of deadly nerve poisonis  
stolen from laboratory, nd Sir Matthew Osterson whoruns nursing  
home receives blackmail letter, Bergerac attempts to solve the...  
a
a
a
a
Advance Day  
More  
Change Time  
Navigate  
i
Figure29  
In the case when there is no schedule information available, the list  
shown on the dialog will display the label No Information Available.  
NOTE:  
In DTV main menu, press SELECT button to enter Channel List dialog, or directly press List  
button on the remote controller to enter Channel List dialog, press UP/DOWN button to  
highlight a channel, and press SELECT button to select the channel as current channel, then  
press DTV MENU or LIST button to exit the dialog and watch the current selected channel.  
In DTV mode, you can select a program by directly pressing P-/+ button or digit button. For  
example, if you selected CHANNEL 7, and the following six sub-channels,7.7, 70.7, 71.7, 72.7  
, 73.7, 77.7, has existed in the channel. You can watch the program of 71.7 by directly pressing  
the digits 7 and 1. Next, if you press P+ button, your TV will access to the program of 72.7.  
If you press digit 7 and 4 buttons, your TV will access to the program of 73.7, because 73 is the  
closest and smallest digit to 74.If the current sub-channel is 73.7, when you press P+ button,  
your TV will access to the program of 77.7, that is tosay, any empty program can not be selected  
by pressing P+/- button or digit buttons.  
In DTV mode, some audio programs without picture can be received.  
Your TV is fit forMPEG-2 standard and AUSTRALIA DVB-T standard. Itis a standard  
definition handled module, so the TVcan not decode high definition (HD)content, it  
can only decode standard definition content. When your TV selected a program of high  
definition, the following dialog will appear on the screen: can not decode HD content  
.
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. TROUBLESHOOTING  
7.1 PROBLEMS OF PICTURE  
The most common types of picture problems are as follows:  
IGNITION  
Black spots or horizontal streaks appear, or  
the picture flutters or drifts. This is usually  
caused by interference from car ignition  
system, neon lamps, electric drills, or other  
electrical appliances.  
GHOSTS  
Ghosts are caused by the television signal  
following two paths. One is the direct path, the  
other is reflected from tall buildings, hills, or  
other objects. Changing the direction or  
position of the antenna may improve the  
reception.  
SNOW  
If the antenna is located in the fringe area of a  
television signal where the signal is weak, the  
picture may be marred by dots. When the  
signal is extremely weak, it may be necessary  
to install a special antenna to improve the  
reception.  
RADIO FREQUENCY  
INTERFERENCE  
This interference produces moving ripples or  
diagonal streaks, and in some cases, loss of  
contrast in the picture.  
CRT DEGAUSSING  
If the TV screen has been magnetized with  
impropercolourappearing on the particular area  
of screen,poweroff the TV (or unplug AC cord).  
After10 minutes, turnon themainpower(orplug  
in AC cord). Repeat the above process until  
improper colour disappear.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7. TROUBLESHOOTING  
7.2 PROBLEMS IN OPERATION  
If this unit does not seem to operate properly, check the POSSIBLE CAUSES below.  
SYMPTOM  
POSSIBLE CAUSES  
NO POWER  
The power cord is not connected.  
The POWER BUTTON on the main unit is off.  
NO TV RECEPTION  
NOISY PICTURE  
The antenna connector is not connected, or wires are broken.  
Cables are incorrectly connected to external equipment.  
The appropriate colour system is not selected.  
The TV is not fine-tuned correctly.  
The antenna is not adjusted correctly.  
Cables are incorrectly connected to external equipment.  
Possible station trouble.  
Possible local interference  
.
NO REMOTE CONTROL OPERATION  
NORMAL PICTURE, NO SOUND  
The batteries need to be replaced.  
Polarities of the batteries are incorrect.  
Main power is not on.  
Something may interfere the path to remote sensor.  
Volume is set to min., press VOL. + button.  
Volume is set to mute, press MUTE button.  
Possible chassis problem.  
NO PICTURE, NORMAL SOUND  
NO COLOUR  
Brightness & Contrast may be set to min.  
.
TV station problem.  
Select other colour systems by SYSTEM key.  
Colour may be set to min..  
Program may be in black and white.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. SPECIFICATIONS  
MAIN UNIT  
1. ATV Parts:  
TV Receiving System:  
AV Color System:  
Tuner:  
PAL/BG  
PAL, NTSC 3.58 & 4.43  
FS TUNER  
100 (0-99)  
Number of Preset Program:  
Channel Indicator:  
FunctionAdjust Indicator:  
Languageof OSD:  
RF Aerial Input:  
On screen display  
MENU display  
English  
75-ohm unbalanced  
75-ohm 1.0Vp-p, RCA  
10k ohm 0.5 Vrms, high impedance  
1k ohm 0.5 Vrms  
6W+6W  
Video Input/Output:  
Audio Input:  
Audio Output:  
Audio  
Power:  
Output  
2. DTV Parts:  
Tuner and Channel  
Connector :  
1 Phono type(7/8M)Input  
51 to 858MHz  
75-ohm unbalanced  
-20dBmV to 75dBmV  
COFDM  
QPSK, 16-QAM, 64-QAM  
7 MHz/8MHz  
2K/8K  
1/4, 1/8, 1/16, 1/32, off  
1/2, 2/3, 3/4, 5/6 and 7/8  
Frequency Range:  
Input Impedance :  
Digital Signal InputLevel:  
Demodulation :  
Constellation :  
Tuner Bandwidth :  
FFT mode:  
Guard Interval:  
FEC Code Rate:  
MPEG TransportStream A/V Decoding:  
Transport Stream:  
MPEG-2 ISO/IEC 13818, Transport stream  
specification  
Profile Level :  
Input Rate:  
MPEG-2 MP@ML  
Max. 27.71Mbit/s  
Aspect Ratio:  
Video Resolution:  
Audio Decoding:  
Audio Mode :  
4:3, 16:9  
SD 576i  
MPEG layer I and II, Musicam  
Stereo Channel, DualMono, Joint Stereo Channel,  
Mono  
32, 44.1 and48KHz  
SPDIF  
Sampling Rate:  
Digital Audio:  
Digital system hardware section:  
CPU :  
PNx831X  
SDRAM Memory:  
Flash memory:  
RS-232 Data Port 9 pin D-sub Type, Baud rate 9600~115200Kbps.  
16Mbyte  
4Mbyte  
SPDIF Digital Audio Output: RCA  
Tuner:  
DVB-T  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Other parts:  
Operating  
240V~, 50Hz  
Voltage:  
Power Consumption:  
PictureTUbe:  
110W  
32 (76cm)  
,,  
Dimensions:  
550 578 MM (W X D X H)  
865  
X
X
Net Weight:  
61 kg  
INFRA-RED REMOTE CONTROL:  
Features:  
Full Function Remote Control  
8 meters  
Effective Distance Power:  
Power Supply:  
DC 3V (two batteries, size AA)  
PACKINGLIST:  
1. TV set - one set  
2. Remote Control Handset - one set  
3. Operation Manual - one pc  
Product is subjected to change without notice.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan  
Phone:  
Phone :  
(0422) 52-5081  
(03)9672 2400  
TEAC CORPORATION  
TEAC AUSTRALIA PTY.,LTD.  
A.B.N.:80 005 408 462  
280 William Street, Melbourne, VIC 3000  
HEAD OFFICE  
SERVICE DIVISION  
MELBOURNE, VIC  
DANDENONG, VIC  
SYDNEY, NSW  
BRISBANE, QLD  
PERTH, WA  
Pier 31 Lorimer Street, Port Melbourne, VIC 3207  
32 Lonsdale Street, Dandenong, VIC 3175  
Phone :  
Phone :  
Phone :  
Phone :  
Phone :  
Phone :  
(03)9644 2444  
(03)9791 9139  
(02)8811 4000  
(07)3010 0100  
(08)9479 6522  
(08)8234 1044  
Unit 8, 20-22 Foundry Rd., Seven Hills, NSW 2147.  
335 Montague Road, West End, QLD 4101.  
273 Great Eastern Highway, Belmont, WA 6104.  
Cnr. Sir D. Bradman & Marion Roads, Cowandilla, SA 5033.  
ADELAIDE, SA  
E-mail  
[email protected]  
Website  
http://www.teac.com.au  
72-329045-E639A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Texas Instruments Calculator TI 10 User Manual
Tiffen Camera Accessories Camera Filters User Manual
TOA Electronics Microphone WM 370 User Manual
Tokina Camera Accessories TM7Z0818N User Manual
Toshiba Air Conditioner RAV SP1404AT E User Manual
Toshiba Graphics Tablet WT8 A Series User Manual
Tripp Lite Network Cables N002 025 GN User Manual
Vision Fitness Home Gym ST760 User Manual
Vision Fitness Treadmill T9500HRT Orbo User Manual
Weed Eater Blower 530088049 User Manual