122mkIII
Technical Documentation
PRODUCT OVERVIEW
When only the best will do, call on TASCAM's
122mkIII. The 122mkIII is the de-facto
standard for cassette mastering and playback
in studios, broadcast, and live applications,
and with good reason. Few products receive
this much attention to detail during every
aspect of the production. The advanced
direct drive motor, Cobalt Amorphous heads,
built in test tones and front panel bias and
gear/clutch coupled record level controls
combine to make the 122mkIII the industry
standard recorder that professionals depend on.
• Three Head Design
• Precision VU Meters with Peak LEDs
• Cobalt Amorphous Record and Play Heads
• Advanced FG Servo Direct Drive Capstan Motor
• Gear/Clutch Coupled Input Level Controls
• Dolby B and C with HX Pro Headroom Extension
• ±12% Pitch Control with Clear On/Off Switch
• Two Locate Points and Return To Zero Functions
• Headphone Output with Level Control
• Auto-Input Monitor Selector
• Front Panel Line Inputs
• Convenient Front Panel BIAS Calibration Controls
• Built-in Tone Oscillators
• Parallel Control Port
• Fader Start Function
• MPX Filter
• Balanced XLR and Unbalanced RCA Analog I/O
• Optional RC-134 Remote Control
APPLICATIONS
SPECIFICATIONS
The 122mkIII is designed to offer convenience and reliability to
those who need it all when working in demanding environments.
If your facility has a need for high quality recording to cassette,
there is nothing better than the 122mkIII.
Performance Specifications:
Track System:
Heads:
Type of Tape:
Tape Speed:
Pitch Control:
Motors:
4 track, 2 channel stereo
(1) Erase, (1) Record, (1) Reproduce
Cassette C-60, C-90
1 7/8 ips, 4.76 cm/sec
Approx ±12%
Recording Studio Mixdown Deck
1 FG DC servo direct-drive capstan motor
1 DC reel motor
Cassettes produced on the 122mkIII will absolutely be reference
quality. The advanced FG servo direct drive capstan motor provides
very stable recordings, with almost no wow and flutter effects. The
three head design allows the user to listen to the recording from
tape. You won't have to listen to the tape in another pass to make
sure the tape didn't oversaturate. The built in tone generators and
front panel bias controls make adjusting the machine to suit the
specific tape a breeze.
1 DC ancillary motor
Frequency Response:
25Hz-20kHz ±3dB Metal
25Hz-19kHz ±3dB CrO2
25Hz-17kHz ±3dB Normal
Total Harmonic Distortion: <1% (1kHz, 160nWb/m)
Signal to Noise Ratio:
>80dB Dolby C, 1kHz, 3% THD wtd
>70dB Dolby B, 5kHz, 3% THD wtd
>60dB Dolby off
Wow and Flutter:
<0.04% (W RMS)
±0.065 peak (DIN/IEC/ANSI wtd)
150kHz
-10dBu, 20kOhm
+4dBu, 600 Ohm, balanced
-10dBu, 100 Ohm
+4dBu, 600 Ohm, balanced
100mW + 100mW, 8 Ohm
Live Theater
Bias/Erase Frequency:
Input RCA & 1/4":
Input XLR:
Line Output RCA:
Line Output XLR:
Headphone Output:
Sound quality is important, but in live productions, there is no take
two. Everything has to work right the first time. TASCAM's
legendary reputation didn't develop overnight; it was the result of
consistent delivery of robust products that never let the user down.
Broadcast Applications - Radio Studios
Let's face it, we aren't always polite when we press PLAY. Radio
stations work 24 hours a day. Three seconds of dead air can cost
you a substantial listener base, with ten seconds losing almost all
of it. The 122mkIII is designed to withstand the beating given by
engineers under pressure. Solid controls with status LEDs offer
immediate intuitive readout of exactly what is going on. Plus, the
parallel in control enables the user to directly interface the
122mkIII with broadcast consoles for event starts or "recording"
warning lights outside the studio.
General Specifications:
Power Requirements:
120V AC, 60Hz (US/Canada Model)
230V AC, 50Hz (Europe Model)
240V AC, 50Hz (Australia Model)
23W
482 x 132 x 356 mm
19" x 5 1/4" x 14"
Power Consumption:
Dimensions:
Weight:
Optional Accessories:
8.4Kg, 18.5 lbs.
Wired Remote (RC-134)
7733 Telegraph Road
•
Montebello, CA 90640
•
(323) 726-0303
•
Page 1 of 3
122mkIII_TECHDOC.pdf
032500
All features and specifications are subject to change without notice. Contact your local TASCAM representative for the latest information.
Download from Www.Somanuals.com. All Manuals Search And Download.
122mkIII Technical Documentation
FRONT AND BACK PANEL
OPTIONAL REMOTE (RC-134)
PARALLEL I/O
Pin
1
2
Signal
PLAY In
FFWD In
Control I/O Legend
12
10
8
6
4
2
13
11
9
7
5
3
1
3
REW In
4
PAUSE In
5
STOP In
6
7
8
9
REC In
25
23
21
19
17
15
NOT USED
NOT USED
TAPE DIRECTION Tally
NOT USED
PLAY Tally
FF Tally
REW Tally
PAUSE Tally
STOP Tally
REC Tally
NOT USED
NOT USED
REEL PULSE
NOT USED
RTZ In
FADER START In
NOT USED
GROUND
24
22
20
18
16
14
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
Parallel Control Notes:
All command controls are labeled as "in" on
the chart at left. The commands are active
when brought to ground for more than 50
milliseconds or longer.
FADER START pin (22) operates as a latched
function. Playback begins when the pin is
brought to ground for more than 50 msec,
and stops when the ground is released for
more than 50 msec.
Tally outputs indicates the corresponding
transport function when the pin is brought
to ground.
+5V (Max 50mA)
7733 Telegraph Road
•
Montebello, CA 90640
•
(323) 726-0303
•
Page 3 of 3
122mkIII_TECHDOC.pdf
032500
All features and specifications are subject to change without notice. Contact your local TASCAM representative for the latest information.
Download from Www.Somanuals.com. All Manuals Search And Download.
|