Security Printing Solutions
Quick-Start Guide
READ ME FIRST
Product Installation Instructions
(For use with TROY MICR / IRD 3005 Security Printing Solutions)
Introduction
Your TROY Security Printing Solution offers value-added functionality and the flexibility to integrate smoothly
with your check-printing system. Use the TROY Security Printing Solutions CD to install the necessary
Hewlett-Packard LaserJet printer drivers and TROY support files. To ensure successful software installation,
perform the following steps in sequential order. The documentation and installation files contained on the
TROY Security Printing Solutions CD will be needed in the event that your TROY Security Printing Solution is
reinstalled in a new location or after service has been performed. In order to best install and setup your new
TROY product, use this Quick-Start Guide and the Hewlett-Packard Getting Started Guide.
Package Contents
•
•
•
•
•
•
•
TROY Security Printing Solutions CD
TROY Security Printing Solutions Information Sheet
TROY Software License Agreement
TROY MICR Document Template
TROY Security Printing Solutions User’s Guide (provided in PDF format on the CD)
TROY MICR Basics Handbook (provided in PDF format on the CD)
TROY Security Printing Solutions Quick-Start Guide (this document)
IMPORTANT: If you purchased a TROY Font Memory Card Kit, please refer to the TROY Font Card
Installation Guide provided with the TROY product to install the font card into your
Hewlett-Packard LaserJet printer before proceeding with these setup instructions. After
the font card has been installed in your printer, proceed to Step 2 in this document to install
the required TROY support files. In addition, a MICR toner cartridge must also be installed
in your HP printer to print MICR documents using the TROY Font Card Solution.
STEP 1: Unpack / Setup the TROY Security Printing Solutions Printer
1. Follow ONLY the unpacking and setup procedures described in the Hewlett-Packard Getting Started
Guide (supplied in this startup package for TROY Security Printing Solutions printers only), and then
proceed to step #2 to install the appropriate PCL 5e printer driver provided on the TROY Security
Printing Solutions CD. Do NOT use the Hewlett-Packard CD to install the printer software for this
installation process.
2. Be sure to install the TROY MICR toner cartridge (supplied with TROY Security Printing Solutions
printers only) in the same manner as described for the standard toner cartridge. The TROY MICR toner
cartridge must be installed in your TROY printer or Hewlett-Packard printer to print MICR documents.
Document #50-70430-001 Rev. B
Page 1 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Security Printing Solutions
Quick-Start Guide
15. Click on Finish to complete the installation. The printer driver installation will proceed automatically
and add the printer icon to the printer folder.
STEP 3: Install the TROY Support Files for Microsoft® Windows™
NOTE: The Hewlett-Packard PCL 5e printer driver must be installed on the host computer prior to loading the
TROY support files (refer to STEP 2 on the previous page).
The TROY metrics file contains the required escape sequences that are used to “call” the TROY security and/or
barcode fonts installed in the TROY Security Printing Solution (via the TROY Memory Card). When properly
installed, the TROY metrics file will be associated with the PCL 5e printer driver used by your TROY printer to
enable printing of the actual fonts installed in the printer. By associating the metrics file with the printer driver,
the TROY TrueType screen fonts will be automatically replaced with the actual TROY fonts at print time. If the
TROY metrics file is not properly installed, then the TROY TrueType screen fonts will print instead of the
actual TROY installed printer fonts.
Install the TROY Metrics File for Windows™ 98SE and ME Operating Systems
1. Close all applications before installing the TROY Font support files.
2. Insert the TROY Security Printing Solutions CD into your computer CD-ROM drive.
3. From the Microsoft Windows Start menu, click on Settings, and then click on Printers.
4. Right-click on your TROY Security Printing Solution icon, and then click on Properties from the pull-
down menu. If multiple printers are installed, make sure the correct printer icon is selected that
corresponds to your TROY Security Printing Solutions printer.
5. Click on the Configure tab located at the top of the Properties window.
6. Within the Other Options category, click on the More button. Some printer driver versions may not
display the Other Options category. If this is the case, simply skip to the next step.
7. Within the Fonts category, place a check mark in the Font Cards checkbox, and then click on the
Configure button (with some printer driver software versions, the Configure button may already be
“clicked”). A new window will open labeled Configure Font Cards.
8. Click on the Add button to open the Add Font Card window.
9. Click on the Browse button to open a Windows Explorer-style window. Click on the down-arrow in the
Drives box to select the CD-ROM drive on your computer. Double-click on the Support Files folder
from the list of folders, double-click on the HPD Files folder, and then double-click on the Domestic
folder. For international products, double-click on the International folder.
10. Click on the file (located in the left-hand window) named TroySEC.hpd or TroySECINTL.hpd (for
International customers), and then click on Open or OK (the displayed window may vary depending on
the operating system being used). With some printer drivers, the Add Font Card window will appear.
If this window appears, click on OK to close the window.
11. Within the Configure Font Cards window, verify the installation by clicking on the Font Card Name:
TROY Security Font Collection or TROY International Security Font Collection listed under Installed
Font Cards. Within the Fonts list, the TROY E-13B (enabled) along with other TROY fonts will be
displayed.
12. Repeat Steps 9 through 11 to install the barcode fonts. Double-click on the Support Files folder, the
HPD Files folder, and the Barcode folder, and then select the TroyBAR.hpd file. Verify the installation
by clicking on the Font Card Name: TROY Barcode Font Collection listed under Installed Font Cards.
Within the Fonts list, the TROY barcode fonts will be displayed.
Document #50-70430-001 Rev. B
Page 3 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Security Printing Solutions
Quick-Start Guide
13. Close all remaining open windows. Please refer to the TROY Security Printing Solutions User’s Guide,
Section 7 – Using TROY Fonts before using the installed fonts.
Install the TROY Screen Fonts for Windows™ 98SE and ME Operating Systems
In addition to the TROY printer fonts that are permanently programmed into your TROY Security Printing
Solution, the TROY screen fonts have been developed for display use only as a visual reference and for
making positional adjustments to the MICR line. The TROY screen fonts display differently than the actual
printer fonts to prevent unauthorized printing using the MICR screen fonts on other Windows-installed
printers.
If the E-13B MICR screen font is used for printing, the inversely printed (white characters on black
background) MICR screen font will not be readable by the bank reader/sorter machines. The uniquely
displayed screen fonts ensure that the MICR font printed on your MICR documents is generated from a
TROY Security Printing Solution and not from the Windows TrueType™ screen font. The TROY screen
fonts are provided on the TROY Security Printing Solutions CD supplied with your TROY Security
Printing Solution.
1. Close all applications before installing the TROY support files.
2. Insert the TROY Security Printing Solutions CD into your computer CD-ROM drive.
3. From the Start menu, click on Settings, and then click on Control Panel.
4. Double-click on the Fonts folder icon.
5. Click on File, and then click on Install New Font… A new window labeled Add Fonts will open and
then a Windows Explorer-style window will open.
6. Click on the down-arrow in the Drives box to select the CD-ROM drive on your computer. Double-
click on the Support Files folder from the list of folders, double-click on the HPD Files folder, and then
double-click on the Domestic folder. For international products, double-click on the International
folder.
7. A list of TROY fonts will be listed within the List of Fonts section. Click on Select All to highlight all
available fonts, and then click on OK. A processing window may appear while the installation process
proceeds. Individual fonts may be selected if all the fonts are not needed.
8. Repeat Steps 5 through 7 to install the barcode screen fonts. Double-click on the Support Files folder,
double-click on the HPD Files folder, and then double-click on the Barcode folder. Within the List of
Fonts section, click on Select All to highlight all available barcode fonts, and then click on OK. A
processing window may appear while the installation process proceeds.
9. Close all remaining open windows. The TROY screen fonts are now installed.
NOTE: For International customers, the International numeric fonts are not resident on the TROY
Memory Card. These fonts are located on the TROY Security Printing Solutions CD in the
“\Support Files\HPD Files\International\Fonts” folder and can be added to the TROY Memory
Card using the TROY Printer Utility – Download Soft Fonts Option. These fonts are designed
as non-scalable bitmapped fonts.
Document #50-70430-001 Rev. B
Page 4 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Security Printing Solutions
Quick-Start Guide
Install the TROY Metrics File for Windows™ 2000, XP, Server 2003 Operating Systems
1. Close all applications before installing the TROY Font support files.
2. Insert the TROY Security Printing Solutions CD into your computer CD-ROM drive.
3. From the Microsoft Windows Start menu, click on Settings, and then click on Printers.
4. Right-click on your TROY Security Printing Solution icon, and then click on Properties from the pull-
down menu. If multiple printers are installed, make sure the correct printer icon is selected that
corresponds to your TROY Security Printing Solutions printer.
5. Click on the Device Settings tab located at the top of the Properties window.
6. Click on External Font (under the Font Substitution Table category), and then click on the Properties
button.
7. Click on the Browse button to open the drive selection window. Double-click on the appropriate drive
letter to select the CD-ROM drive on your computer.
8. Double-click on the Support Files folder from the list of folders, double-click on the PCM Files folder,
Double-click on the Domestic folder, and then click on OK to close the drive selection window. For
international products, double-click on the International folder.
9. Use the SHIFT key to select all the fonts located in the left-hand window named TROY Auto-Protect,
TROY PCM7, etc., and then click on Add to add those fonts. If you want to add an individual font, just
highlight that specific font name and click on the Add button. All the added fonts should be displayed
in the right-hand window.
NOTE: If the barcode option was purchased, repeat Steps 8 through 10. Choose the TROY Barcode PCM
file from the Barcode folder on the TROY Security Printing Solutions CD.
10. Close all remaining open windows. Please refer to the TROY Security Printing Solutions User’s Guide,
Section 7 – Using TROY Fonts before using the installed fonts.
NOTE: Windows 2000/XP operating systems do not require installation of the TROY screen fonts.
Document #50-70430-001 Rev. B
Page 5 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Security Printing Solutions
Quick-Start Guide
STEP 4: Install the TROY Software for Microsoft® Windows™
Install the TROY Printer Utility for Windows™ 98SE, ME, 2000, XP, Server 2003
The TROY Printer Utility provides useful functions for testing and managing your TROY Security Printing
Solution through Microsoft® Windows™. This utility takes advantage of the Windows-installed printer
collection, allowing access to any printer installed in the Windows environment. The printer connection
may be local, network, or direct network connected. The TROY Printer Utility should be installed on the
administrator’s computer only. Some of the features of the TROY Printer Utility are provided for special
applications and may not be intended for general use. Refer to the TROY Security Printing Solutions User’s
Guide, Section 4 – Using the TROY Printer Utility for more information.
1. Close all applications before installing the TROY Printer Utility application.
2. Insert the TROY Security Printing Solutions CD into your CD-ROM drive.
3. From the Start menu, click on Run, and then click on Browse.
4. Click on the down-arrow in the Look In box at the top of the window, and then click on the drive letter
designated for the CD-ROM drive on your computer.
5. Double-click on the TROY Printer Utility folder.
6. Click on the file named setup.exe, click on Open, and then click on OK to start the installation process.
Follow the screen prompts to complete the installation.
Install the TROY Port Monitor for Windows™ 98SE, ME, 2000, XP, Server 2003
The TROY Port Monitor allows each user to embed additional user-defined data and/or print commands
(data encryption and TROY security commands) into the print data stream generated by their Windows
application before it is sent to the printer. Once a port monitor is set up on the host computer, all this
functionality takes place in the background without the need for user intervention.
Using the TROY Port Monitor or custom applications designed to print to TROY Security Printers, certain
printer feature settings can be temporarily changed during a print job. When the print job has finished, the
EX printer will automatically return to the original default feature configuration set by the administrator.
Refer to the Security Printing Solutions User’s Guide, Section 5 – Using the TROY Port Monitor for more
information.
NOTE: To maintain MICR printing security and to allow users the ability to configure their MICR print
jobs, the TROY Port Monitor must be installed on each host computer that will be used to print
MICR documents on the TROY Security Printer.
1. Close all applications before installing the TROY Port Monitor.
2. Place the TROY Security Printing Solutions CD into your CD-ROM drive.
3. From the Start menu, click on Run, and then click on Browse.
4. Click on the down-arrow in the Look In box at the top of the window, and then click on the drive letter
designated for the CD-ROM drive on your computer.
5. Double-click on the TROY Port Monitor folder.
6. Click on the file named setup.exe, click on Open, and then click on OK to start the installation process.
Follow the screen prompts to complete the installation.
Document #50-70430-001 Rev. B
Page 6 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Security Printing Solutions
Quick-Start Guide
Create a TROY Port Monitor Port on Your Host Computer for Windows™ 2000, XP, 2003
1. From the Start menu, click on Settings, Printers, right-click on the desired printer, and then left-click on
Properties.
2. Select the Ports tab, and then click on the Add Port button.
3. Select TROY Port Monitor in the Printer Ports window, and then click on the New Port button. The
TROY Port Monitor screen will appear.
4. Specify a TROY Port Monitor port name in the Port Name textbox. At this point, the TROY Port
Monitor port is configured with the following default settings: port type is LPT1, encryption OFF, no
User or Password account specified, no MICR/Printer PIN specified, no Job Name and Job PIN
specified, default paper tray mapping selected, MICR mode enabled, and wallpaper disabled. These
default settings can be changed at any time.
5. If you choose not to configure the TROY Port Monitor port at this time, click on the OK button to close
the TROY Port Monitor window, which will automatically create the new TROY Port Monitor port.
6. Click on the Close button to close the Printer Ports window.
7. Click on the Apply button from the Port tab to select the TROY Port Monitor port as the default printing
port.
8. Click on the OK button to close Printer Properties window.
Create a TROY Port Monitor Port on Your Host Computer for Windows™ 98SE, ME
1. From the Start menu, click on Settings, Printers, right-click on the desired printer, and then left-click on
Properties.
2. Select the Details tab, and then click on the Add Port button.
3. Select the Other radio button.
4. Select TROY Port Monitor from the list, and then click on the OK button. The TROY Port Monitor
screen will appear.
5. Specify a TROY Port Monitor port name in the Port Name textbox. At this point, the TROY Port
Monitor port is configured with the following default settings: port type is LPT1, encryption OFF, no
User or Password account specified, no MICR/Printer PIN specified, no Job Name and Job PIN
specified, default paper tray mapping selected, MICR mode enabled, and wallpaper disabled. These
default settings can be changed at any time.
6. If you choose not to configure the TROY Port Monitor port at this time, click on the OK button to close
the TROY Port Monitor window, which will automatically create the new TROY Port Monitor port.
7. Click on the Apply button from the Details tab to select the TROY Port Monitor port as the default
printing port.
8. Click on the OK button to close the Printer Properties window.
Document #50-70430-001 Rev. B
Page 7 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Security Printing Solutions
Quick-Start Guide
STEP 5: Test the TROY Font Support for Microsoft® Windows™
To verify that the TROY Windows font support files were properly installed on your system, demonstration
documents are provided through the TROY Printer Utility in Windows that can be printed out to visually
identify all security and/or barcode fonts downloaded to the TROY printer. Make sure your TROY printer is
properly setup, powered ON, and is online before printing the Windows Security Font and/or Windows Barcode
Font Demonstration page(s).
TO PRINT THE TROY SECURITY FONT / BARCODE FONT DEMONSTRATION PAGE(S):
NOTE: TROY Secure EX series printers must have the printer keylock switch set to
“Print MICR” to enable printing the Windows Security Font Demonstration page.
1. From the TROY Printer Utility
Main Window, click on the printer
you wish to manage.
2. If you have already set an
administrator password, type the
password into the password box at
the bottom of the Main Window.
If a password is not set, then leave
the password box blank.
3. From the Main Window, click on
File, Print, and then click on
Windows Security (MICR) Font
Demo. Select the desired printer
from the list of printers, and then
click on OK. The printer will
automatically print the Windows
Security Font Demo page.
4. Compare the actual TROY security fonts (the actual fonts generated by your printing system) shown in the
right-hand column with the facsimile image of these fonts printed in the center column (a digitized image
designed to look exactly like the actual fonts correctly generated by your system – refer to the example
shown on the next page).
If the support files were properly installed, the actual TROY security and/or barcode fonts displayed in the
right-hand column should appear identical to the facsimile fonts displayed in the center column. If the
actual fonts do not match the facsimile fonts printed on the demonstration document (fonts not printed
correctly or fonts missing on the printout), review the installation steps in this document. If further
assistance is required, contact TROY Technical Support.
Accessing TROY Fonts Using Non-Windows Applications
If you are using a non-Windows application to print MICR documents, the escape sequence for each font must
be programmed into the application in order to “call” each of the selected fonts. The <Esc> character is ASCII
character number 27 (hexadecimal number 1B). Refer to the TROY Security Printing Solutions User’s Guide
Document #50-70430-001 Rev. B
Page 8 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Security Printing Solutions
Quick-Start Guide
for the specific escape sequence (displayed above each character map) used to call each of the TROY fonts.
TROY Security Font Demonstration Page (not to scale)
Document #50-70430-001 Rev. B
Page 9 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Security Printing Solutions
Quick-Start Guide
STEP 6: Check the MICR Print Quality
Maintaining high-quality MICR printing is vital to error-free reader/sorter processing of your checks at the bank.
TROY’s Security Printing Solutions have been consistently shown to have the lowest bank reject rates in the
industry. Poor MICR print quality will cause your checks to be rejected by the bank’s automatic MICR readers,
and therefore, you may incur significant manual processing fees from your bank for each rejected check. The
TROY MICR Quality Document is resident in your TROY printer and can be printed out at any time using the
TROY Printer Utility or printer control panel. Use the TROY MICR Quality Document as a reference to
evaluate the general print quality of your TROY Security Printing Solution.
PRINT THE TROY MICR QUALITY DOCUMENT:
NOTE: TROY Secure EX series printers must have the printer keylock switch set to
“Print MICR” to enable printing of the MICR Quality Document.
1. From the Printer Utility Main Window, click on the printer you wish to manage.
2. If you have already set an administrator password, type the password into the
password box at the bottom of the Main
Window. If a password is not set, then leave
the password box blank.
3. From the Main Window, click on File, and
then click on Print.
4. Click on Quality Document. Choose either
the E-13B or CMC-7 version of this
document. The printer will automatically
print the TROY MICR Quality Document.
Identifying Print Defects
Continuous streaks and/or voids that appear on
the MICR Quality Document are usually the
result of a low toner condition. A scratch or
other contamination on the surface of the optical
drum inside the toner cartridge can also cause
streaking and other print quality defects.
To ensure optimum MICR print quality, always
use a TROY MICR toner cartridge with your
TROY Security Printing Solution. Always
replace the TROY MICR toner cartridge with a
new TROY MICR toner cartridge when a low
toner condition exists. MICR documents printed
after a low toner condition occurs may not meet
MICR specifications and cause your printed
checks to be rejected, thereby incurring
significant manual processing fees to you by
your bank.
NOTE: If your TROY Security Printing Solution develops a noticeable print quality defect that cannot be corrected
by replacing the MICR toner cartridge, the MICR Quality Document can be sent to TROY for evaluation.
Do not continue to print MICR documents if print defects are present.
Document #50-70430-001 Rev. B
Page 10 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Security Printing Solutions
Quick-Start Guide
Obtaining Technical Assistance
The TROY Printer Utility provides several help screens to guide you through the available features and
functions of your TROY Security Printing Solution. TROY technical support is available to assist you with any
questions concerning the setup, operation and maintenance of your Security Printing Solution. Specific system
information about your TROY product configuration is available through the TROY Printer Utility. You are
also encouraged to visit the TROY website for the latest FAQs (Frequently Asked Questions), information on
the latest TROY products, or for ordering MICR toner and other printing supplies.
TO VIEW TECHNICAL SUPPORT INFORMATION:
From the Main Window, click on Help, and then click on Technical Support to view the TROY Technical
Support HTML page for telephone numbers and hours of business.
TO VIEW INFORMATION ON THE TROY WEBSITE:
From the Main Window, click on Help, and then click on TROY on the Web to access the TROY website.
Click on the Services and Support button at the top of the web page to view the available topics. You can
TROY Product Return Policy and Procedure
•
•
•
A Return Goods Authorization (RGA) number is always required. Please call toll free 800-332-MICR
(6427) for a return authorization number and shipping instructions.
The product should be returned in the original packaging and in new condition. Unauthorized returns,
products returned without original packaging, or products showing use or wear will be refused.
Damaged products must be reported within 72 hours. Call 800-332-MICR (6427) and ask for the RGA
coordinator.
•
•
•
If a product is returned for repair, any physical damage will void the warranty.
A 25% restocking fee will be applied to any non-defective items returned within 30 days.
No returns will be accepted after 30 days, unless otherwise stated.
Return product to:
TROY Group Inc
3 Bryan Drive
Wheeling, WV 26003
Attn: (Your RGA Number)
Reference Material
•
•
•
•
•
TROY MICR Basics Handbook (provided on the TROY Security Printing Solutions CD)
TROY Security Printing Solutions User’s Guide (provided on the TROY Security Printing Solutions CD)
TROY Programmer’s Reference Guide (provided on the TROY Security Printing Solutions CD)
Hewlett-Packard Getting Started Guide (provided in TROY Security Printing Solutions Startup Package)
Hewlett-Packard Printer User’s Guide (provided on the Hewlett-Packard CD)
Document #50-70430-001 Rev. B
Page 11 of 11
Download from Www.Somanuals.com. All Manuals Search And Download.
|