Quick Installation Guide
TPE-S44
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Avant de commencer
Contenu de l'emballage
TPE-S44
Guide d'installation rapide
Cordon d'alimentation
Pieds en caoutchouc
Adaptateur secteur (48VAC, 0.8A)
Configuration du système
Un ordinateur avec un adaptateur réseau correctement installé
Câble réseau RJ-45
La surface sous le commutateur doit pouvoir résister à un poids minimum
de 1,5 kg
La prise secteur doit être située à un maximum de 1,82 mètres de l'appareil
Inspectez visuellement la prise d'alimentation et assurez-vous qu'elle
est correctement connectée à l'adaptateur secteur
Vérifiez la présence d'une source de ventilation adéquate autour du
commutateur pour une dissipation efficace de la chaleur
Ne placez pas d'objets lourds sur le commutateur.
Périphérique alimenté par IEEE 802.3af
TPE-102S (non fourni)
Remarque: Le TPE-S44 ne supporte que les péripériques alimentés qui
respectent la norme IEEE 802.3af Mode A (broche 1, 2, 3, 6).
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Application
Advanced Wireless Pan & Tilt
Internet Camera Server
(TV-IP400W)
Power over Ethernet
(PoE) Splitter
(TPE-102S)
108Mbps 802.11g
Hot-Spot Access Point
(TEW-453APB)
8-Port 10/100Mbps
Fast Ethernet PoE Switch
(TPE-S44)
108Mbps 802.11g
Wireless Access Point
(TEW-450APB)
Power over Ethernet
(PoE) Splitter
(TPE-102S)
54Mbps 802.11g Wireless
PoE Access Point
(TEW-434APB)
10/100Mbps
10/100Mbps + PoE
2
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Identification des composants exterieurs
Cette partie identifie tous les principaux composants extérieurs du Switch. Les
panneaux arrière et avant sont tous deux représentés, avec une description
des caractéristiques de chaque panneau.
Remarque : Lorsque vous mettez le Switch sous tension, tous les voyants
s'allumeront pendant une seconde et s'éteindront ensuite. Seul le voyant Power
restera allumé.
Paneau frontal
PoE MAX
PoE Status (Ports 1 à 4)
Lorsque le Switch est relié à un
périphérique PoE et que le port
fournit correctement
l'alimentation, le voyant est vert.
Si le voyant est rouge, le port
n'a pas réussi à fournir
l'alimentation. Si aucun
périphérique alimenté n'est
branché, le voyant ne s'allume
pas.
Si le Switch détecte qu'il y a
7,5W (ou moins) de courant
disponible, ce voyant s'allumera.
Ceci indique une surtension. Si
le Switch detecte qu'il y a plus
de 7,5W de courant disponible,
ce voyant ne s'allumera pas.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Paneau frontal
System Power
Lorsque le voyant est allumé, le
Switch est alimenté.
100Mbps (Ports de 1 à 8)
Link/Act (Ports 1 à 8)
Lorsque le voyant est allumé, le
port est relié à un périphérique
Ethernet/Fast Ethernet actif. Il
est vert et clignote quand le port
émet ou reçoit des données.
Lorsque le voyant est allumé, le
port est relié à un périphérique
Fast Ethernet actif. S'il est
éteint, le port est soit branché à
une connexion Ethernet, soit il
n'y a pas de connexion au port.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Panneau arrière
Prise de courant DC :
PoE Ports (1 à 4)
L'alimentation est fournie via un
adaptateur secteur AC externe.
Consultez la section traitant des
spécifications techniques afin
d'obtenir des informations sur la
tension entrante.
Le port PoE sera
automatiquement activé
lorqu’un péripérique compatible
est détecté. Le Switch fournira
l’alimentation au périphérique
alimenté branché via le port
Ethernet.
Le switch ne comprenant pas
d'interrupteur on/off, en
branchant votre adapteur
secteur à une prise de courant,
vous alimenterez
immédiatement le Switch.
Portsethernet(5à8)
Lorsque le voyant est vert, le
switch est alimenté.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Installation du matériel
Remarque : La tension maximale disponible est de 15,4 watts par port et de 30
Watts au total. Si une surcharge se produit, le Switch donnera la priorité à la
distribution de courant par port (du plus bas au plus haut). Donc, le port 1
recevra la priorité la plus importante et le port 4, la priorité la plus faible. La
fonction PoE des ports avec la priorité la plus faible sera désactivéejusqu'à ce
qu'au moins 7,5 Watts soient disponibles.
1. Branchez le cordon d'alimentation
sur l' adaptateur secteur AC.
Branchez l'adaptateur secteur AC
au TPE-S44 et à une prise de
courant.
2. Branchez un câble réseau RJ-45
entre l'ordinateur et un port
Ethernet disponible sur le
TPE-S44.
3. Branchez un câble RJ-45 cable
entre un port PoE (1 à 4) du
TPE-S44 et le port LAN du
périphérique PoE (p. ex. le
TEW-434APB)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Vérifiez que les voyants suivants
du panneau sont allumés: System
Power, PoE Status et Link/ACT.
Utilisation du TPE-S44 et du TPE-102S avec un
périphérique non-POE
1. Sélectionnez le voltage adéquat
(5V ou 12V).
2. Branchez un câble Ethernet entre
le port PoE (1 à 4) du switch
TPE-S44 et le port POE IN du
TPE-102S.
3. Branchez une câble Ethernet entre
le périphérique non PoE et le port
DATA OUT du TPE-102S.
4. Branchez le câble Jumper entre un
périphérique non PoE (p. ex. le
TV-IP100) et le TPE-102S.
5. Vérifiez que les voyants suivants
du panneau sont allumés: System
Power, PoE Status et Link/ACT.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Specifications
General
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
ANSI/IEEE 802.3 NWay Auto-negotiation
IEEE 802.3x Full-Duplex Flow Control
IEEE 802.3af Power over Ethernet
Standards
Protocol
CSMA/CD
Ethernet:
10Mbps (half-duplex), 20Mbps (full-duplex)
Fast Ethernet:
100Mbps (half-duplex), 200Mbps (full-duplex)
Data Transfer Rates
Topology
Star
Ethernet:
UTP/STP CAT-3, -4, -5 ; up to 100M
Fast Ethernet:
UTP/STP CAT-5, -5e, -6; up to 100M
Network Cables
Number of Ports
4 × 10/100Mbps Auto-MDIX RJ45 ports with
PoE enabled (port 1 ~ port 4)
4 × 10/100Mbps Auto-MDIX RJ45 ports
(port 5 ~ port 8)
Power+: pin 3 & pin 6
Power-: pin 1 & pin 2
PoE Power on RJ-45
LED
Per Unit: System Power; PoE Max
Per 10/100 Port: Link/ACT, 100
Per PoE Port: PoE Status, Link/ACT, 100
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Physical and Environmental
DC inputs
48V DC, 0.8A
6.3 watts. (max. for ports 5~8)
30 watts (max for PoE ports)
36.3 watts (total)
Power Consumption
Temperature
Humidity
Operating: 0° ~ 40° C, Storage: -10° ~ 70° C
Operating: 10% ~ 90%, Storage:5% ~ 90%
Dimensions
Weight
171 x 98 x 29 mm
44g
CE, FCC
Certification
Performance
Transmission Method
Store-and-forward
10Mbps Ethernet: 14,880pps (packet per
second)
100Mbps Fast Ethernet: 148,800pps
Packet Filtering/
Forwarding Rate
MAC Address Learning
Automatic Update
96K bytes per device
1K entries per device
RAM Buffer
Filtering Address Table
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Q1: After connecting the Switch to a power outlet, the LEDs do not turn
on.
A1: Check the connection of the external power adapter to the TPE-S44
and the power outlet. Also check that the power outlet is receiving power.
Q2: After I connect my PCs to the Switch, I am unable to share files.
A2: First, check the LEDs on the Switch. Make sure the Link/ACT LED is
on. Second, check the network cable. The minimum length of the cable is
1.5 meters and the maximum length of the cable is 100 meters. Third,
disable any software firewall program. Fourth, verify that you have file
sharing enabled. Please contact your Operating System support for more
information.
Q3: After I connect my PCs to the Switch, I can only get onto the Internet
from one computer.
A3: The Switch was not designed to share Internet between multiple
computers. You need to get an Internet router such as the
TW100-S4W1CA.
Q4: My 802.3af Powered device does not power on when I plug the device
into the Switch. What should I do?
A4: First, verify that the PoE device supports IEEE 802.3af protocol.
Second, power cycle the PoE switch. Unplug power to the Switch, wait 15
seconds, then plug the power back in. Third, plug the device into a
different port on the PoE switch. Fourth, try using another RJ-45 network
cable. Fifth, a power overload may have an occurred. Connect your
802.3af Powered Device into port 1 and/or disconnect all other 802.3af
Powered Device.
If you still encounter problems or have any questions regarding the TPE-S44
please contact TRENDnet's Technical Support Department.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
TRENDnet warrants its products against defects in material and workmanship, under
normal use and service, for the following lengths of time from the date of purchase.
TPE-S44 - 5-Year Warranty
If a product does not operate as warranted above during the applicable warranty period,
TRENDnet shall, at its option and expense, repair the defective product or deliver to
customer an equivalent product to replace the defective item. All products that are
replaced will become the property of TRENDnet. Replacement products may be new or
reconditioned.
TRENDnet shall not be responsible for any software, firmware, information, or memory
data of customer contained in, stored on, or integrated with any products returned to
TRENDnet pursuant to any warranty.
There are no user serviceable parts inside the product. Do not remove or attempt to
service the product through any unauthorized service center. This warranty is voided if
(i) the product has been modified or repaired by any unauthorized service center, (ii) the
product was subject to accident, abuse, or improper use (iii) the product was subject to
conditions more severe than those specified in the manual.
Warranty service may be obtained by contacting TRENDnet office within the applicable
warranty period for a Return Material Authorization (RMA) number, accompanied by a
copy of the dated proof of the purchase. Products returned to TRENDnet must be pre-
authorized by TRENDnet with RMA number marked on the outside of the package, and
sent prepaid, insured and packaged appropriately for safe shipment.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE
AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT
TRENDNET’S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING
WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER
WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF
LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. TRENDNET
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT
ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE OR USE OF TRENDNET’S PRODUCTS.
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES
NOT EXIST OR WAS CAUSED BY CUSTOMER’S OR ANY THIRD PERSON’S
MISUSE, NEGLECT, IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED
ATTEMPTS TO REPAIR OR MODIFY, OR ANY OTHER CAUSE BEYOND THE
RANGE OF THE INTENDED USE, OR BY ACCIDENT, FIRE, LIGHTNING, OR OTHER
HAZARD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET
ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER
BASED IN CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL,
CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND,
OR FOR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATE, OR OTHER FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE SALE, INSTALLATION, MAINTENANCE, USE,
PERFORMANCE, FAILURE, OR INTERRUPTION OF THE POSSIBILITY OF SUCH
DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT TRENDNET’S OPTION. THIS DISCLAIMER OF
LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED
HEREIN SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Governing Law: This Limited Warranty shall be governed by the laws of the state of
California.
Note: AC/DC Power Adapter, Cooling Fan, Cables and Power Supply carry a 1-Year
Warranty
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de
alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al
mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador
de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria
existente en el pais o zona de instalación.
Download from Www.Somanuals.com. All Manuals Search And Download.
TRENDnet Technical Support
.
US Canada
Toll Free Telephone: 1(866) 845-3673
24/7 Tech Support
.
.
.
.
.
Europe (Germany France Italy Spain Switzerland UK)
Toll Free Telephone: +00800 60 76 76 67
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Worldwide
Telephone: +(31) (0) 20 504 05 35
English/Espanol - 24/7
Francais/Deutsch - 11am-8pm, Monday - Friday MET
Product Warranty Registration
Please take a moment to register your product online.
20675 Manhattan Place
Torrance, CA 90501
USA
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright ©2007. All Rights Reserved. TRENDnet.
|