Quick Installation Guide
TE100-MP1UN
Download from Www.Somanuals.com. All Manuals Search And DoHwn/loWad.: V1.0R
1. Before You Start
Package Contents
?TE100-MP1UN
?Utility CD-ROM
?Multi-Language Quick Installation
Guide
?Power Adapter (5V, 2A)
System Requirements
?CD-ROM Drive
?CPU: 300Mhz or above/ 800Mhz or above (Windows Vista)
?Memory: 256MB RAM or above/ 512MB RAM or above (Window Vista)
?Windows 2000/XP/2003 Server/Vista (32bit)
Note:
1. Do not perform the following unless instructed to do so:
1. Install the utility
2. Connect printer to Print Server
3. Connect computer to Print Server
2. The utility must be installed on each computer in order to use your multi-
function printer.
Application
1-Port Multi-Function Print Server
(TE100-MP1UN)
Internet
Cable/DSL
Modem
4-Port Gigabit Firewall Router
(TWG-BRF114)
Multi-Functional
Workstations with Fast Ethernet Adapter
USB 2.0 Printer
(TE100-PCIWN)
1
Download from Www.Somanuals.com. All Manuals Search And Download.
English
2. How to install
1. Install the printer drivers to your
computer. Then power down the
printer and disconnect the printer
from your computer.
Note: Please refer to your printer's manual for printer installation instructions.
2. Insert the Utility CD-ROM into your
CD-ROM drive.
3. Click Run Autorun.exe (Windows
Vista only).
4. Click Install Utility. Then click
Setup Wizard.
5. Connect the USB Printer to the
USB port on the Print Server.
Then click OK.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
English
6. Connect a RJ-45 network cable
from a Switch/Router to the LAN
port of the Print Server.
7. Connect a RJ-45 network cable
from a Switch/Router to the
Ethernet port on your computer
and then click OK.
8. Power ON your printer and then
click OK.
9. Connect the AC Power Adapter to
the Print Server and then to a
power outlet. Then click OK.
10. Verify the Status LED is on and
the Error LED if off on the Print
Server. Then click Yes.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
English
11. Select the print server and then
click Next.
12. Configure the IP address of the
print server to be in the same
subnet as your network and then
click Next.
13. Copy down the IP address and
then click Next.
14. Click Finish.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
English
15. Click Yes.
16. Click Next and then follow the
InstallShield Wizard instructions.
17. Click Finish.
18. Click on Resource and then click
Connect.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
English
19. The printer driver wizard appears.
Follow the printer driver wizard to
install the printer.
20. Click OK.
Print Server configuration is now complete.
For detailed information regarding the TE100-MP1UN configuration and
advanced settings, please refer to the User's Guide on the Utility CD-ROM or
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
Thank you for choosing TRENDnet
6
Download from Www.Somanuals.com. All Manuals Search And Download.
English
3. Printing
Note: Only one user can use the print server at a time. Once a user has
finished using the print server, another user can use it.
1. Click on Resource and then click
Connect.
2. Status will now show the client
computer and IP address that is
currently using the printer.
3. User can now start printing.
4. Click Disconnect.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
English
4. Faxing
Note: Only one user can use the print server at a time. Once a user has
finished using the print server, another user can use it.
1. Click on Resource and then click
Connect.
2. Status will now show the client
computer and IP address that is
currently using the printer.
3. User can now start Faxing. Follow
the Multifunction printer software
instructions for faxing.
4. Click Disconnect.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
English
5. Scanning
Note: Only one user can use the print server at a time. Once a user has
finished using the print server, another user can use it.
1. Click on Resource and then click
Connect.
2. Status will now show the client
computer and IP address that is
currently using the printer.
3. Place the document on the Multi-
Function Printer's Scanner bed.
Then follow the Multifunction
printer software instructions for
scanning.
4. Click Disconnect.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
English
Troubleshooting
Q1. I inserted the Utility CD-ROM into my computer's CD-ROM Drive but the installation menu does not
appear automatically. What should I do?
A1. For Windows 2000/XP, if the window does not appear automatically, click Start, click Run, and type
D:\autorun.exe where "D" in "D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then
press the ENTER key on your keyboard. For Windows Vista, if the installation menu does not appear
automatically, click Start, click the Start Search box, and type D:\autorun.exe where "D" in
"D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your
keyboard.
Q2. The setup wizard does not detect the Print Server and/or printer/storage device. What
should I do?
A2. First, double check your hardware connections; make sure that the Print Server and printer are
powered ON and are properly connected. Make sure the RJ-45 network cable is securely connected to
the Print Server and Switch/Router. Second, disable any software firewall programs such as ZoneAlarm
or Norton Internet Security. If your computer is running Windows XP or Vista, disable the built-in firewall.
Third, click Refresh. Fourth, power cycle the Print Server. Unplug the power to the Print Server, wait 15
seconds, then plug the Print Server back in.
Q3. The setup wizard does not detect my printer device. What should I do?
A3. First, make sure the printer is powered on and properly connected to the Print Server. Second,
connect the printer with another USB cable. Third, reset the print server. Take a pin or paperclip and
press the reset button on the print server for 15 seconds, then let go.
Q4. I am unable to print to my Print Server. What should I do?
A4. First, make sure you follow the exact steps for installing the Print Server in section 2 Second, make
sure to right click on the print server in the utility and click connect. If another user is using the print
server, you must wait until the user is finished using it. Third, if you are connected to the print server and
are idled for a couple of minutes, a warning message appears. If you do not respond within a minute, you
will be automatically disconnected from the print server. You must connect to the print server again.
Q5. I can print a test page, but I cannot print anything from Microsoft Word or other applications.
A5. Make sure to set the newly installed network printer as your default printer. Click Start and then click
Printers & Faxes, verify that your printer icon has a check on it.
Q6. I configured my Print Server to automatically receive an IP Address from a DHCP server, and now I
cannot go into the Print Server's web utility.
A6. Open the print server setup wizard (See 1. How to install) to locate your Print Server's IP
Address.
Q7. Is there a way to force a computer to give up ownership to the print server?
A7. If the user has been idled for 5 minutes, the user will be automatically disconnected. You can also
force a computer to give up ownership by unplugging the power to the print server and plug the power
back in.
If you still encounter problems or have any questions regarding the TE100-MP1UN, please refer to the User's
Guide included on the Utility CD-ROM or contact TRENDnet's Technical Support Department.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de alimentacón
necesario para su funcionamiento. El uso de un adaptador distinto al mencionado puede producir
daños fisicos y/o daños al equipo conectado. El adaptador de alimentación debe operar con voltaje y
frecuencia de la energia electrica domiciliaria existente en el pais o zona de instalación.
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Warranty Registration
Please take a moment to register your product online.
20675 Manhattan Place
Torrance, CA 90501
USA
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright ©2008. All Rights Reserved. TRENDnet.
|