Quick Installation Guide
TV-IP110
TV-IP110W
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Before You Start
Package Contents
?TV-IP110/TV-IP110W
?Utility CD-ROM
?Quick Installation Guide
?1 x 2dBi Detachable Antenna
(TV-IP110W)
?AC Power Adapter (5V, 2.5A)
System Requirements
?10/100Mbps Ethernet
?CPU: 1GHz processor or above
?Memory: 256MB RAM or above/ 512MB RAM or above (Windows Vista)
?Windows 2000/XP/Vista
?VGA Resolution: 800 x 600 or above
?Web Browser: Internet Explorer (6.0 or higher)
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Application
Internet Camera Server
(TV-IP110)
Cable/DSL 4-Port
Broadband Router
(TW100-S4W1CA)
Internet
Notebook with PC Card
(TE100-PCBUSR)
Modem
10/100Mbps
Wireless Internet Camera Server
(TV-IP110W)
Wireless G Firewall Router
(TEW-432BRP)
Internet
Notebook with
Wireless G PC Card
(TEW-421PC)
Modem
54Mbps
2
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Hardware Installation
1. Attach the Antenna. (TV-IP110W)
2. Connect a RJ-45 network cable
from a Switch/Router to the
Ethernet port of the Internet
Camera Server.
3. Connect the AC Power Adapter to
the Internet Camera Server and
then to a power outlet.
4. Verify the Power and Link LEDs
are on.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Configure the Internet Camera
Note:
1. It is recommended that you configure the Internet Camera from a wired
computer.
2. If you would like to use SecurView software, please refer to the User's Guide
on the CD for more information.
1. Insert the Utility CD-ROM into your
CD-ROM drive and then click IP
Setup.
2. Follow the Installation Wizard
instructions and then click Close.
3. Go to Start -> Programs ->
TRENDnet -> IPSetup and click
IPSetup.
Note: By default, the IP setting on the TV-IP110/TV-IP110W is set to DHCP.
Please skip to step 8. If you want to give the TV-IP110/TV-IP110W static IP
address, continue on to step 4.
4. Select the Internet Camera and
click Change IP.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Configure the IP address to be in
the same subnet as your network,
type in the Administrator ID and
Password and click Change. By
default:
ID: admin
Password: admin
6. Click OK and wait 30 seconds.
7. Click OK.
8. Double click the IP Camera to
access the browser configuration.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Enter the User name and
Password, and then click OK.
User Name: admin
Password: admin
10. Right click and select Install
ActiveX Control.
11. Click Install.
12. Click Setup, Network and then
click Wireless. (TV-IP110W only)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Click Site Survey. Select your
wireless network. If encryption is
enabled, select the proper
Authentication type, enter the
Pre-Shared Key and then click
Apply. (Example shows WPA2-
PSK. If your wireless network
does not support WPA, select
open or shared instead. Contact
your network administrator for
more information) (TV-IP110W
only).
14. Disconnect the RJ-45 cable and
unplug the power. Then plug the
power back in (TV-IP110W).
Note: The TV-IP110W will not work wirelessly until you disconnect the Ethernet
cable from the back of the camera.
15. Verify the Power and Link LEDs
are on.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
16. Click Live View.
Your installation is now complete.
Note: For detailed information regarding the TV-IP110/TV-IP110W configuration
and advanced settings, please refer to the Troubleshooting section, User's
Guide on the Utility CD-ROM, or TRENDnet's website at
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
Thank you for choosing TRENDnet
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Q1: IP Setup is unable to detect my camera. What should I do?
A1: First, verify that you have followed all the steps in the Section 2: Hardware Installation.
Second, disable any software firewall programs such as ZoneAlarm or Norton Internet
Security. If you are using Windows XP or Windows Vista, disable the built in firewall. Third,
click on Search in the IPSetup setup wizard.
Q2: I do not have a DHCP server or DHCP is disabled on my network and I am unable to
configure the TV-IP110/TV-IP110W. What should I do?
A2: First, go to the TCP/IP settings on your computer and assign a static IP address on your
computer's network adapter in the subnet of 192.168.10.x. Since default IP address of the
TV-IP110/W is 192.168.10.30, do not assign a static IP address of 192.168.10.30 on your
computer's network adapter. Second, run the IPSetup wizard and double click on the
TV-IP110/TV-IP110W to access the browser configuration.
Q3: The Image is blurry. How can I adjust the focus on the Internet camera?
A3: You can adjust the Internet Camera’s focus by rotating the lens.
Q4: When I click on Live View the image does not load?
A4: First, make sure that you are using a browser that supports ActiveX. Second, make
sure that you added ActiveX. See step 10 and 11 in Section 2: Configure the Internet
Camera.
Q5: How do I connect the TV-IP110W to my wireless router or access point?
A5: Make sure that you configure the camera to have the same SSID, encryption mode and
key (if enabled). Follow the instructions in section 2 to configure the camera with the SSID
and encryption key.
Q6: After I successfully configured the TV-IP110W to match my wireless network settings, I
can not connect to the camera.
A6: First, verify that the wireless settings match your wireless network settings. Second,
verify in the wireless section of the browser configuration that the Enable option is checked.
Third, make sure to disconnect the Ethernet cable from the camera and verify that the LINK
LED is blinking green.
Q7: I forgot my password. What should I do?
A7: Take a pin or paperclip and press the reset button on the back of the unit for 15 seconds.
This will return settings back to factory defaults. The default IP address is 192.168.10.30.
The default administrator ID and password is admin.
If you still encounter problems or have any questions regarding the TV-IP110/TV-IP110W, please
contact TRENDnet’s Technical Support Department.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may
cause undesired operation.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
ADVERTENCIA
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de
alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al
mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador
de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria
existente en el pais o zona de instalación.
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Warranty Registration
Please take a moment to register your product online.
20675 Manhattan Place
Torrance, CA 90501
USA
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright ©2008. All Rights Reserved. TRENDnet.
|