TRENDnet Computer Hardware TK 802R User Manual

Quick Installation Guide  
TK-802R  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1. Before You Start  
Package Contents  
?
TK-802R  
Multi-Language Quick Installation Guide  
Daisy-Chain Cable  
Rack mount kit  
AC Power Adapter (9V DC, 1A)  
?
?
?
?
System Requirements  
?PS/2 Keyboard  
?PS/2 Mouse  
?VGA Compatible Monitor  
?PS/2 KVM cables (e.g. TK-C06, TK-C10, TK-C15)  
?Windows 98SE/ME/2000/XP/2003 Server/Vista, Linux and Netware  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
2. How to Install  
1. Turn OFF all computers and their peripherals,  
and then disconnect all power cords.  
2. Connect the shared PS/2 keyboard, monitor,  
and PS/2 mouse to the KVM switch's Console  
Port.  
3. Connect the included AC Power Adapter to the  
KVM switch and then to a power outlet.  
4. Use the KVM cables to connect each computer  
to the KVM switch. Note: Do not use the  
supplied daisy-chain cable to connect to your  
computer. You must purchase these KVM  
cables separately.  
5. Turn ON the connected computers one-by-one  
and wait until each computer's desktop  
appears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
Daisy-Chain  
Note:  
1. Must use the daisy chain cable provided with the KVM switch  
2. Only daisy chain the KVM switch with another TK-802R  
3. Stackable up to 16 KVM switches  
6. Connect one end of the daisy-chain to the  
Daisy chain in port on the first (master) KVM  
switch.  
Master  
7. Connect the opposite end of the daisy-chain  
cable to the Console port on the second  
switch (slave1)  
slave1  
8. If you have a third KVM switch, connect one  
end of the daisy chain to the Daisy chain in  
port on the second KVM switch (Slave 1). Then  
connect the opposite end of the daisy-chain  
cable to the console port on the third switch  
(Slave 2). Repeat for each additional switch.  
slave2  
9. Press Port 1 button on the first (master) switch  
for 3 seconds to initialize the daisy chain.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Note: DO NOT PRESS the port 1 button for 3 seconds or longer on any slave switch  
because this will initialize only the switches downstream from this slave switch.  
10. Turn ON the connected computers one-by-  
one and wait until each computer's desktop  
appears.  
Rack Mount  
The KVM Switch can be mounted in an EIA standard-size, 19-inch rack, which can be  
placed in a wiring closet with other equipment.  
Note: If you would like to mount the KVM switch to a EIA 19” equipment rack, install the  
included mounting brackets to the sides of the KVM switch, secure them with the screws  
provided, and then mount the KVM switch to the equipment rack with the hardware  
provided by the equipment rack manufacturer.  
11. Attach the mounting brackets to both sides of  
the switch and secure them with the provided  
screws.  
12. Carefully position the switch onto the rack.  
Align the bracket to the screw holes on the  
rack, then use the screws provided with the  
equipment rack to mount the switch.  
Your installation is now complete.  
Register Your Product  
To ensure the highest level of customer service and support, please take a moment to  
register your product Online at: www.trendnet.com/register  
Thank you for choosing TRENDnet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
3. Operation  
Note: To switch between computers, you can use the front-panel push buttons or the  
Hot Key commands.  
LED Indicators  
Bank Number: Indicates the number or sequence  
of the switch when daisy chained. This number is  
01 when the switch is not daisy chained.  
Red LED light: KVM cable is connected and PC  
is powering the KVM switch.  
Green LED light: Indicates the selected PC port  
is active, whether the computer is turned on or off.  
Push Buttons  
Press the push buttons to switch between  
computers.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
Hot Key Commands  
A keyboard hot key command consists of at least three keystrokes:  
Hot Key command = Scroll Lock + Scroll Lock + Command key(s)  
After pressing the Scroll Lock key, you have 2 seconds to press the Scroll Lock key  
again. You then have another 2 seconds to press a command key. A beep confirms that  
the KVM switch is in "Hot Key" mode. If you do not press a key within 2 seconds, the  
switch will exit hot key mode.  
To select a specific PC port  
Scroll Lock  
Scroll Lock  
+
+
A + B + Y + Z  
Select PC =  
Bank number  
Port number  
For example, to select port 1, hit the following key sequence:  
Select PC = Scroll Lock  
Scroll Lock  
+ 0 + 1 + 0 + 1  
+
For example, to select port 8 of the 10th KVM switch on a series of daisy chained  
TK-802R's you hit the following key sequence:  
Scroll Lock  
Scroll Lock  
+ 1 + 0 + 0 + 8  
+
Select PC =  
Note: When using the KVM switch standalone, type in 0 + 1 for the bank number.  
For a list of all the Hot Key commands, please see the Quick Reference Sheet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
On Screen Display (OSD) Control  
To activate the OSD Menu, use the following hot-key command:  
Scroll Lock  
Scroll Lock  
Space Bar  
+
+
Note: For detailed information about the operation of the OSD, please refer the Quick  
Referece Sheet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
Quick Reference Sheet for TK-802R  
Hot Keys  
Front-panel  
Description  
Command  
Select PC  
OSD  
Select the active bank  
(switch) and channel  
(computer)  
Use arrow keys to  
select and then  
hit enter  
Press Push Button  
for a specific port  
to the switch  
Scroll Lock  
+
Scroll Lock  
+
+
+
+
A
B
Y
Z
(ab) = bank number  
(yz)= 2-digit channel number  
Select the next lower  
connected channel  
Only works within  
active bank  
Use arrow keys to  
select and then  
hit enter  
Next lower  
channel  
Scroll Lock  
+
Scroll Lock  
+
- - -  
(Arrow down)  
Select the next higher  
connected channel  
Only works within  
active bank  
Use arrow keys to  
select and then  
hit enter  
Next higher  
channel  
Scroll Lock  
Scroll Lock  
+
+
Scroll Lock  
Scroll Lock  
+
+
- - -  
(Arrow up)  
Select the next lower  
bank when multiple  
switches are  
Next lower  
bank  
- - -  
Page Down  
Page Down  
daisy-chained  
Select the next higher  
bank when multiple  
switches are  
Next higher  
bank  
- - -  
Scroll Lock  
Scroll Lock  
+
+
Scroll Lock  
Scroll Lock  
+
+
Page Up  
Page Up  
daisy chained  
Autoscan  
Beep Sound  
On/Off  
Toggle On/Off beep  
during autoscan mode  
B
- - -  
- - -  
- - -  
Restore to Factory  
Defaults except  
password  
Reflash  
EEPROM  
- - -  
- - -  
Scroll Lock  
Scroll Lock  
+
+
Scroll Lock  
Scroll Lock  
- - -  
+
+
R
F
Find PC by  
Name  
Search presence of a  
specific PC by name  
- - -  
- - -  
Use arrow keys to  
select and then hit  
enter  
Change PC  
Name  
Change the PC Name  
Resets/reboot/initialize  
daisy-chain and  
activates password  
protection  
Reset /  
Initialize  
Press on button  
1 for 3 seconds  
- - -  
- - -  
Scroll Lock  
Scroll Lock  
+
+
Scroll Lock  
Scroll Lock  
+
+
End  
Show OSD  
Menu  
Space Bar  
- - -  
- - -  
Activates OSD menu  
Autoscan through every  
connected channel for  
quick browsing of each  
channel  
Press any push  
button  
Scroll Lock  
+
Scroll Lock  
+
S
Autoscan  
Autoscan  
with  
Programmable  
Delay Time  
Use arrow keys to  
navigate, then hit  
enter to select and  
edit name  
Specify a delay within a  
range of 5~99 seconds  
- - -  
- - -  
Press any button  
or key  
Press any button  
or key  
Press any key on keyboard  
Stop Autoscan  
End Autoscan activity  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Troubleshooting  
Do I need to use the included external AC adapter?  
It is recommended that you use the included external AC adapter with the TK-802R KVM  
switch.  
Can I connect or disconnect the KVM cables while the computers are turned on?  
Yes, you can connect or disconnect the KVM cables while the computers are turned on,  
because the interface is Hot-Pluggable.  
Will the KVM switch restore the keyboard settings when switching between computers?  
Yes, the KVM switch will restore the keyboard settings when switching between computers.  
(i.e.: Caps Lock, Num Lock, etc.)  
The KVM switch prompts for a password. What should I do?  
The default password is 00000000. Type this in. If this does not work, follow the below  
procedure to reset the KVM switch:  
1. Shutdown your computers.  
2. Unplug the power to the KVM switch.  
3. Press on the reset button using a pin or paper clip. The reset button is on the back of the  
KVM switch, next to the power.  
4. Plug the power while still pressing on the reset button.  
5. Wait for the beep and let go.  
How do I switch from one computer to another with the KVM switch?  
You can switch computers by pressing the Push Buttons on the KVM switch or using the Hot  
Key commands. Go to Section 3 Operation for more information.  
If you still encounter problems or have any questions regarding the TK-802R, please contact  
TRENDnet's Technical Support Department.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
Limited Warranty  
TRENDnet warrants its products against defects in material and workmanship, under normal  
use and service, for the following lengths of time from the date of purchase.  
TK-802R - 2 Year Limited Warranty  
AC/DC Power Adapter, Cooling Fan and Power Supply carry a 1 year limited warranty  
If a product does not operate as warranted during the applicable warranty period, TRENDnet  
shall reserve the right, at its expense, to repair or replace the defective product or part and  
deliver an equivalent product or part to the customer. The repair/replacement unit's warranty  
continues from the original date of purchase. All products that are replaced become the  
property of TRENDnet. Replacement products may be new or reconditioned. TRENDnet  
does not issue refunds or credit. Please contact the point-of-purchase for their return policies.  
TRENDnet shall not be responsible for any software, firmware, information, or memory data of  
customer contained in, stored on, or integrated with any products returned to TRENDnet  
pursuant toany warranty.  
There are no user serviceable parts inside the product. Do not remove or attempt to service the  
product by any unauthorized service center. This warranty is voided if (i) the product has been  
modified or repaired by any unauthorized service center, (ii) the product was subject to accident,  
abuse, or improper use (iii) the product was subject to conditions more severe than those  
specified in themanual.  
Warranty service may be obtained by contacting TRENDnet within the applicable warranty  
period and providing a copy of the dated proof of the purchase. Upon proper submission of  
required documentation a Return Material Authorization (RMA) number will be issued. An RMA  
number is required in order to initiate warranty service support for all TRENDnet products.  
Products that are sent to TRENDnet for RMAservice must have the RMAnumber marked on the  
outside of return packages and sent to TRENDnet prepaid, insured and packaged appropriately  
for safe shipment. Customers shipping from outside of the USAand Canada are responsible for  
return shipping fees. Customers shipping from outside of the USA are responsible for custom  
charges, including but not limited to, duty, tax, and other fees.  
Download from Www.Somanuals.co
1
m
0
. All Manuals Search And Download.  
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS  
WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDNET'S  
OPTION, REPAIR OR REPLACE. THE FOREGOING WARRANTIES AND REMEDIES ARE  
EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED,  
EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING  
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  
TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME  
FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION  
MAINTENANCEOR USEOFTRENDNET'SPRODUCTS.  
TRENDNET SHALL NOT BE LIABLE UNDER THIS WARRANTY IF ITS TESTING AND  
EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT IN THE PRODUCT DOES NOT  
EXIST OR WAS CAUSED BY CUSTOMER'S ORANYTHIRD PERSON'S MISUSE, NEGLECT,  
IMPROPER INSTALLATION OR TESTING, UNAUTHORIZED ATTEMPTS TO REPAIR OR  
MODIFY, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR BY  
ACCIDENT, FIRE, LIGHTNING, OROTHERHAZARD.  
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW TRENDNET ALSO  
EXCLUDES FOR ITSELF AND ITS SUPPLIERS ANY LIABILITY, WHETHER BASED IN  
CONTRACT OR TORT (INCLUDING NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL,  
INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OFANY KIND, OR FOR LOSS OF REVENUE  
OR PROFITS, LOSS OF BUSINESS, LOSS OF INFORMATION OR DATE, OR OTHER  
FINANCIALLOSSARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION,  
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF THE  
POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS LIABILITY TO REPAIR,  
REPLACEMENT, OR REFUND OF THE PURCHASE PRICE PAID,ATTRENDNET'S OPTION.  
THIS DISCLAIMER OF LIABILITY FOR DAMAGES WILL NOT BE AFFECTED IF ANY  
REMEDYPROVIDEDHEREINSHALLFAILOF ITSESSENTIALPURPOSE.  
Governing Law:This Limited Warranty shall begoverned by the laws ofthestate ofCalifornia.  
SomeTRENDnet products include software code written by third party developers. These codes  
are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License  
("LGPL").  
Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download section and look for  
the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are  
distributed WITHOUT WARRANTY and are subject to the copyrights of the developers.  
TRENDnet does not provide technical support for these codes. Please go to  
each license.  
PWP05202009v2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
Certifications  
This equipment has been tested and found to comply with FCC and CE Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference.  
(2) This device must accept any interference received. Including interference that may  
cause undesired operation.  
Waste electrical and electronic products must not  
be disposed of with household waste. Please  
recycle where facilities exist. Check with you Local  
Authority or Retailer for recycling advice.  
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV  
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS  
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO  
OPERATE THE EQUIPMENT.  
ADVERTENCIA  
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de alimentacón  
necesario para su funcionamiento. El uso de un adaptador distinto al mencionado puede producir  
daños fisicos y/o daños al equipo conectado. El adaptador de alimentación debe operar con voltaje y  
frecuencia de la energia electrica domiciliaria existente en el pais o zona de instalación.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Warranty Registration  
Please take a moment to register your product online.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Copyright ©2009. All Rights Reserved. TRENDnet.  

Tektronix Sprinkler 7603 User Manual
Telex Projector P170 User Manual
Toastmaster Toaster T2010F User Manual
Toshiba Flat Panel Television 20HL86 User Manual
Toshiba MP3 Player SD V65HT User Manual
Vantec Computer Drive NST D150SU BK User Manual
Vertical Communications Vacuum Cleaner UV800B User Manual
Vidikron Projector 150 LightAmp User Manual
Vox Music Pedal Satchurator User Manual
VTech Cordless Telephone MI6807 User Manual