TP Link Network Router TL MR7HN User Manual

Physical Description  
Package Contents  
Before hardware connection, please write down the  
Wireless Password and SSID found on the label of your  
TL-WR710N. Both are case-sensitive.  
TL-WR710N LED Guide:  
LED  
Status  
The device is working properly.  
Solid Blue  
System is booting.  
Blinking  
The Ethernet Cable or USB Device is  
connecting to the product.  
15  
0M  
bp  
s
TL  
-WR7  
10  
N
Quick Installation Guide  
150Mbps Wireless N Mini Pocket Router - Advanced Edition  
ꢂꢃꢄ.CQTꢁ8JSFMFTTꢁ/ꢁ.JOJꢁ1PDLFUꢁ3PVUFS  
ꢅ"EWBODFEꢁ&EJUJPO  
.PEFMꢀ 5-ꢃ83ꢋꢁꢂ/  
Model:TL-WR710N(US) Ver:1.0  
1PXFSꢀꢀꢁꢂꢂꢃꢄꢅꢂ7_ꢀꢆꢂꢇꢈꢂ)[ꢀꢂꢉꢊ"  
%FGBVMUꢁ"DDFTTꢀ  
S/N:XXXXXXXXXXXX  
IUUQꢌꢇꢇUQMJOLMPHJOꢉOFU  
6TFSOBNFꢌꢀBENJO  
1BTTXPSEꢀꢌꢀBENJO  
MAC:B0487A663D6C  
Wireless Password/PIN:12345678  
SSID:TP-LINK_663D6C  
IC: 8853A-WR710N  
USB Reset LAN/WAN  
LAN  
TL-WR710N  
Ethernet Cable  
Model:TL-WR710N(US) Ver:1.0  
S/N:XXXXXXXXXXXX  
USBConnect  
a
USB Flash drive or External Hard Drive for file  
sharing. It can also be used as a charging station for mobile devices.  
MAC:B0487A663D6C  
ResetResets the TL-WR710N to factory default settings.  
LAN/WAN: Must use this port to connect to your Modem while in Router  
mode. For all other modes, use it as an additional LAN port.  
Wireless Password/PIN:12345678  
SSID:TP-LINK_663D6C  
150Mbps Wireless  
N
Mini Pocket Router - Advanced Edition  
LAN: Connect your ethernet enabled devices for wired network access.  
In client mode, use it to give wireless access to a wired-only device. In  
access point mode, use it to receive network access from your local  
network.  
MODEL NO. TL-WR710N  
Resource CD for User Guide Only  
QIG  
For more detailed information about Reset, please refer to  
Wireless Password/PIN  
:
Default Password  
Appendix: Troubleshooting  
.
SSID Default Network Name  
:
MODEL NO. TL-WR710N  
Operating Modes  
1
Wireless Router Mode (Default)  
Create an instant password-protected wireless  
network with an NAT Firewall and share internet with  
multiple devices. This mode is suitable for hotel  
rooms and home networks.  
2
Client Mode  
Use as a wireless adapter for wired-only Ethernet  
enabled devices. This mode is suitable for  
connecting Smart TVs, game consoles, or computers  
to your wireless network.  
3
4
Access Point Mode  
5
WISP Client Router Mode  
Use as a client router to receive internet access  
from a Wireless Internet Service Provider (WISP),  
and share that access with local devices.  
Repeater Mode  
Repeat signal from an existing wireless network.  
This mode is suitable to extend wireless coverage,  
reaching devices that were previously too far from  
Create  
a
wireless network from an Ethernet  
connection. This mode is suitable for dorm rooms  
or homes if there's already a wired router but you  
need a wireless hotspot.  
your primary router to maintain  
connection.  
a
stable wireless  
(Note: if the hotel’s Internet has an authentication  
process, you will need to authenticate only once and  
only on one device)  
(Note: if the hotel’s Internet has an authentication  
process, you will need to authenticate it on EACH  
device.)  
The repeated signal will display the same network  
name and password as your existing wireless  
network.  
Protected by NAT Firewall  
def  
Wired Ethernet  
Connection  
Wired Ethernet  
Connection  
.
ocedure is the same  
erent, but the pr  
eenshots may look diff  
ystem, your scr  
, or a Mac Operating S  
erent Windows  
f you are using a diff  
om Windows 7. I  
ed below are fr  
The examples illustrat  
Instant Wireless Connection  
Plug the TL-WR710N into  
near your modem or a wired ethernet connection.  
Wait until the LED is blinking.  
a
power outlet that is  
If you are connecting the TL-WR710N directly to  
your cable modem, you must first power reset the  
modem and wait until its ONLINE LED is solid.  
Then use an ethernet cable to connect to your  
modem via the LAN/WAN port on the TL-WR710N.  
Click the Wireless Network icon on your desktop  
( or ). Select the Default SSID of the  
TL-WR710N, then click Connect.  
Enter the Default Password, then click OK or  
Next.  
Congratulations! You have successfully  
connected to your network!  
1
2
3
4
5
Currently connected to:  
Not Connected  
If you are connecting the TL-WR710N to an existing  
network, simply plug the ethernet cable into the  
LAN/WAN port and to your network.  
TP-LINK_XXXXXX  
Internet access  
Connections are available  
In either case, wait until the LED is solid blue.  
Wireless Network Connection  
Wireless Network Connection  
Connected  
TP-LINK_XXXXXX  
TP-LINK_ XXXXXX  
Connect automatically  
Connect  
TP-LINK_Home  
TP-LINK_Guest  
TP-LINK_Neighbor  
Free Public WiFi  
TP-LINK_Home  
TP-LINK_Guest  
TP-LINK_Neighbor  
Free Public WiFi  
LAN  
Open Network and Sharing Center  
Wired Ethernet  
Connection  
Open Network and Sharing Center  
eset LAN/WAN  
Customizing your Wireless Network Name & Password (Optional)  
Open a web browser and go to the page  
To customise your Wireless Network Name Click  
on “Wirelessfrom the menu on the left.  
In the Wireless Network Namebox, type in  
your new Wireless Name. Then click “Save.  
To customise your Wireless Password, click  
Wireless” from the menu on the left, then click  
Wireless Security.  
In the Wireless Password” box under  
WPA/WPA2 - Personal (Recommended)” type  
in your new wireless Password. Then click “Save.  
5
1
2
3
4
Wireless Settings  
Wireless Settings  
Disable Security  
Wireless Network Name:  
(Also called the SSID)  
INSERT CUSTOM SSID HERE  
WPA/WPA2 Personal (Recommended)  
-
Region:  
United States  
Warning:  
Ensure you select correct country to conform local law.  
Incorrect settings may cause interference.  
a
Status  
Status  
Version:  
WPA2-PSK  
Status  
Quick Setup  
Quick Setup  
WPS  
Wireless Set  
Encryption:  
AES  
Mode:  
Channel Width:  
Channel:  
11bgn mixed  
Auto  
Wireless Password:  
INSERT CUSTOM PASSWORD HERE  
WPS  
Enter the login username: admin and  
password: admin.  
(You can enter ASCII characters between and 63 or Hexdecimal  
8
Working Mode  
Network  
Working Mode  
Auto  
Seconds (Keep it default if you are not sure,  
m
Group Update Key Period:  
Network  
Wireless Ne  
Enable Wireless Router Radio  
Enable SSID Broadcast  
Enable WDS Bridging  
Wireless  
Wireless  
WPA/WPA2  
-
Enterprise  
Version:  
Encryption:  
DHCP  
- Wireless Settings  
- Wireless Security  
- Wireless MAC Filtering  
- Wireless Advanced  
- Wireless Statistics  
DHCP  
Automatic  
Automatic  
Save  
admin  
LAN  
USB Settings  
Forwarding  
Security  
Radius Server IP:  
Radius Port:  
1812  
0
(1-65535, stands for default port 1812)  
0
Ch  
Radius Password:  
Parental Control  
Access Control  
Advanced Routing  
Bandwidth Control  
IP & MAC Binding  
Dynamic DNS  
System Tools  
Group Update Key Period:  
(In seconds, minimum is 30, means no upda  
0
USB Settings  
WEP  
Wireless  
Forwarding  
Automatic  
Hexadecimal  
WEP Key  
Type:  
Security  
WEP Key Format:  
Parental Control  
Access Control  
Advanced Routing  
Bandwidth Control  
IP & MAC Binding  
Dynamic DNS  
System Tools  
Key Selected:  
Key Type  
Key 1:  
Disabled  
Key 2:  
Key 3:  
Key 4:  
Disabled  
Disabled  
Disabled  
Save  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Taylor Scale TE10CSW User Manual
Technics Universal Remote RAK SA937MK User Manual
Teledyne TV Converter Box 102E User Manual
Tiger Products Co Ltd Lawn Mower TS 100A User Manual
TRENDnet Network Hardware TVP 221H User Manual
Troy Bilt Blower TB180b User Manual
True Fitness Treadmill PS75 User Manual
Univex Tablet NEXT7P12 8G User Manual
US Modular Marine Radio MA User Manual
Weber Gas Grill 55062 User Manual