Ø
Ø
SupportsACPI, PCIpowermanagement
Use the drivers supplied by the diskette included in The Product. For
detail description, please refer to "help" in the diskette provided by the
Product.
I/OAddress: Assignedbysystem
Complies with the IEEE802.3u Fast Ethernet, 100Base-TX
standardandIEEE802.3CSMA/CD10Base-Tstandard
SupportsFullDuplexFlowControl(IEEE802.3x)
Fullduplexdesigntodoubletheperformance
SupportsAuto-Negotiationfunction
Software: ODI driver for NetWare 3.x, 4.x, NDIS driver for Microsoft
LAN manager and Windows 98, Windows ME, Windows NT, Windows
2000 Packet driver for TCP/IP
Ø
Ø
Ø
Ø
Ø
User's Guide
Temperature: 0o C to 40o C (Operating)
AppendixA:Troubleshooting
Humidity: 5% to 95% (Non-condensing)
If you experience any problems with the adapter, first make sure the
appropriate driver is loaded, the proper cable is connected to the
adapter port and the hub complies with the adapter specification, such
as10Mbps10Base-Tor100Mbps100Base-TX. ThenrechecktheLED.
Auto-setupsIRQandI/Oaddress
Power consumption: 1W(Max)
Contains two large (2Kbyte) independent receive and transmit
FIFOs
Appendix C: Contact Information
Ø
Ø
OneSTP/UTPconnectorfor10Mbpsor100MbpsnetworkSpeed
Provides diagnostic software and one LED to indicate network
Link/activity
For help with the installation or operation of the TP-LINK TF-3239D/
TF-3239DL Adapter, please contact us.
TheProductprovidedone LEDstoindicatenetworkstatus.
LINK/ACTIVE LED
TP-LINK TECHNOLOGIES CO., LTD.
Ø
Ø
Supports smart remote boot ROM and provides the help for
RPL/PXE(ExcludeTF-3239DL)
TF-3239D/TF-3239DL
Add: Fl.3, Bldg.R1-B, High-Tech Industrial Park, Shennan Road,
A red LED indicates if the 10 or 100Mbps STP/UTP has been link OK or
not and is working or not. When the light is OFF, it indicates that the
STP/UTP port has not been connected or link not OK; When the light
is ON, it indicates that the STP/UTP port link OK. When the light is
BLINKING, it indicates that the STP/UTP port is receiving data or
transmitting data.
Supports ODI Driver for NetWare 3.x, 4.x, NDIS Driver for LAN
Manager, Windows 95, Windows NT, Windows 2000, Packet
driver forTCP/IP
Shenzhen, China
10/100M Fast Ethernet Adapter
E-mail: [email protected]
Website: http://www.tp-link.com
Chapter 2 Installation
Card Installation
Appendix B: Technical Specification
ToinsertTheProductintoyourcomputer, follow thestepslistbelow.
Topology:Star
1
2
3
Turn off the computer and remove its cover.
Insert The Product into a PCI slot.
ConnectorSupported:RJ45
Standard:IEEE802.310Base-T
IEEE802.3u100Base-TX
Secure the Product to the rear of the computer chassis and put
backthecomputercover.
TransmissionRate:100Mbpsor200Mbps
Hardware:IBMPCcompatibles(ItmusthavePCIslot)
IRQLine: Assignedbysystem
4
ConnecttheProduct to the networkusing twisted-pair cables.
Driver Installation
Made in China
2
3
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
|