TP Link Insulin Pen TL POE150S User Manual

User Guide  
TL-POE150S  
PoE Injector  
Rev:2.0.0  
7106503015  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FCC STATEMENT  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to part 15 of the FCC  
Rules. These limits are designed to provide reasonable  
protection against harmful interference in  
a
residential  
installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to  
radio or television reception, which can be determined by turning  
the equipment off and on, the user is encouraged to try to  
correct the interference by one or more of the following  
measures:  
¾
¾
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and  
receiver.  
¾
¾
Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
Consult the dealer or an experienced radio/ TV technician  
for help.  
This device complies with part 15 of the FCC Rules. Operation is  
subject to the following two conditions:  
1) This device may not cause harmful interference.  
2) This device must accept any interference received,  
including interference that may cause undesired operation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Any changes or modifications not expressly approved by the  
party responsible for compliance could void the user’s authority  
to operate the equipment.  
CE Mark Warning  
This is a class B product. In a domestic environment, this  
product may cause radio interference, in which case the user  
may be required to take adequate measures.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Package Contents  
The following items should be found in your package.  
¾
¾
¾
¾
TL-POE150S PoE Injector  
One Power Adapter  
One Ethernet (CAT5 UTP) Cable  
This User Guide  
Note:  
)
Make sure that the package contains the above items. If any of  
the listed items are damaged or missing, please contact with  
your distributor.  
Chapter 1  
Introduction  
1.1 Overview of the Production  
Thank you for choosing the TL-POE150S PoE Injector. The  
Power over Ethernet (PoE*) Injector is able to supply steady  
power to Powered Device (PD*) or PoE Splitter over the  
Ethernet cable. The Ethernet equipment can work as a Power  
Sourcing Equipment (PSE*) with the help of the TL-POE150S  
connection.  
PoE technology allows the existing Ethernet infrastructure to  
transmit electrical power, along with data, to remote IP endpoints  
over the Ethernet cables, which can greatly save the cost of the  
external power cables. Your network can benefit from PoE  
technology for it will ensure the normal working status of your  
network while keep the existing Ethernet infrastructure secure.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
       
*PoE: This technology describes a system to transmit electrical power, along  
with data, to remote devices over standard twisted-pair cable in an  
Ethernet network.  
*PD: A device powered by a PSE and thus consumes energy. Examples  
include powering IP telephones, wireless LAN access points, network  
cameras, network hubs, embedded computers etc.  
*PSE: A device (switch or hub for instance) that will provide power in a PoE  
setup.  
1.2 Features  
¾
Complies with IEEE 802.3, IEEE 802.3u, IEEE 802.3af  
standards  
¾
¾
Compatible with PoE compliant PDs and PoE Splitters  
Transmits electrical power along with data in one single  
cable  
¾
¾
External 48V DC power supply  
Supports Plug-and-Play for the devices, without any  
configuration  
¾
Elegant appearance with space-saving mini size  
Chapter 2  
Identifying External Components  
POWER+DATA OUT: Connect to the PD or PoE Splitter  
with a CAT5 UTP cable.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
     
DC 48V: Connect to the  
provided power adapter  
which can supply steady  
power of 48V DC.  
LAN IN: Connect to  
network device (such as a  
a
Switch or Router  
CAT5 UTP cable.  
)
with  
PWR: Power LED, a steady green  
light indicates that the PoE system has  
detected the PD or PoE Splitter and  
the power adapter is working properly.  
Chapter 3  
Connecting the PoE Injector  
You can use TL-POE150S PoE Injector with PD or PoE Splitter  
to expand your network to where there are no power lines or  
outlets, where you wish to fix devices such as APs, IP Cameras  
or IP Phones, etc. The following steps will tell you how to  
connect the PoE Injector correctly.  
1. Use a CAT5 UTP cable to connect port of Ethernet device  
(such as a switch, hub or router) to the LAN IN port.  
2. Please connect the power adapter properly to a power  
socket with provided power cable, and then connect the  
other end of the power adapter to the DC 48V port of the  
TL-POE150S.  
3. Connect the POWER+DATA OUT port of the TL-POE150S  
to a PD or a PoE Splitter with CAT 5 UTP cable.  
Now, the device can work normally with data and power.  
There are two schemes to realize the PoE.  
1. If the device supports PoE (take an IP camera with PoE for  
example), following topology will work:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
   
Scheme 1  
2. If the device does not support PoE, it is necessary to have a  
PoE Splitter to separate the power and data, transmitting  
them detached in one UTP cable and one power cable. Here  
we take TP-LINK TL-POE10R Splitter for example. You can  
use following topology.  
Scheme 2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
Note:  
)
¾ Do not mistake the power port of the TL-POE150S and  
TL-POE10R when choosing the Scheme 2, or else it will  
cause serious damage to your network device.  
¾ If you want to know more details about TL-POE10R Splitter,  
please refer to “TL-POE10R User Guide” on our website  
Appendix: Specifications  
Normal  
IEEE 802.3, IEEE 802.3u, IEEE  
Standards  
802.3af  
PoE Port  
100BASE-TX / 10BASE-T dual purpose  
Ports  
port  
LAN Port  
Cabling Type  
LED  
RJ45 CAT 5 UTP cable  
PWR  
Safety &  
Emissions  
FCC, CE  
Environmental and Physical  
Operating Temp  
Storage Temp  
0~40(32~104)  
-40~70(-40~158)  
Operating Humidity  
Storage Humidity  
10%~90% RH, Non-condensing  
5%~90% RH, Non-condensing  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
   

Tascam Welding System cg2000 User Manual
Taylor Scale TE11FT User Manual
Texas Instruments Switch XIO3130 EVM User Manual
Tiffen Camera Accessories Glimmerglass Bronze Glimmerglass Filters User Manual
Tiger Rice Cooker RFE 1100 User Manual
Toshiba Universal Remote 2358 User Manual
Traulsen Refrigerator AHT232NPUT FHG User Manual
Tunturi Home Gym E6R User Manual
Vivitar Binoculars viv cv 530v User Manual
VTech Mobility Scooter 91 002487 000 000 User Manual