OPERATING INSTRUCTIONS
REMOTE CONTROLLER
C-RM1000 CU
Thank you for purchasing TOA's Remote Controller. Please carefully follow the instructions in this
manual to ensure long, trouble-free use of your equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
9.8. Combination Camera Menu Display ................................................................. 23
9.9. Storing the Preset Positions .............................................................................. 24
9.10. Deleting Preset Position Data (Communication method: Type B only) ........... 24
10. DIGITAL VIDEO RECORDER OPERATION
10.1. Video Recording ................................................................................................ 25
10.1.1. LED indication during recording ............................................................ 25
10.1.2. Priority recording operation ................................................................... 25
10.1.3. Resetting alarm event recording ........................................................... 26
10.1.4. Making normal recording ...................................................................... 26
10.2. Playback Operation
10.2.1. Playback mode settings ........................................................................ 26
10.2.2. Reverse playback ................................................................................. 26
10.2.3. Stop operation ....................................................................................... 27
10.2.4. Forward/reverse quick playback ........................................................... 27
10.2.5. Time skip forward/reverse playback ..................................................... 27
10.2.6. Pause operation .................................................................................... 27
10.2.7. Frame advance/reverse playback ......................................................... 28
10.2.8. Instant event access playback .............................................................. 28
10.2.9. Earliest image playback ........................................................................ 28
10.2.10. Lastest image revers playback .............................................................. 28
10.3. Search Operation .............................................................................................. 29
10.4. Digital Video Recorder Menu Display ................................................................ 29
10.5. Motion Detection Area Settings ......................................................................... 30
10.6. Archiving ............................................................................................................ 30
10.7. Triplex Settings .................................................................................................. 31
10.8. Entering the Digital Video Recorder Password
10.8.1. Log-in .................................................................................................... 32
10.8.2. Log-out .................................................................................................. 32
11. OTHER OPERATIONS
11.1. Log-In and Log-Out ........................................................................................... 33
11.1.1. Log-in .................................................................................................... 33
11.1.2. Log-out .................................................................................................. 33
11.2. Abbreviation Number ......................................................................................... 34
11.3. Alarm Operations
11.3.1. When alarm is triggered ........................................................................ 34
11.3.2. To stop a buzzer tone ........................................................................... 35
11.3.3. To reset alarm ....................................................................................... 35
11.3.4. Putting screen switching on hold when an alarm occurs ...................... 35
OPERATION
12. SETTINGS
12.1. Setting Item Summaries .................................................................................... 36
12.1.1. Remote controller menu list .................................................................. 37
12.2. Setting Keys and Display Screen ...................................................................... 38
12.3. Basic Setting Operations ................................................................................... 39
12.3.1. Displaying the menu ............................................................................. 39
12.3.2. Operation during menu display ............................................................. 39
12.3.3. Closing the menu .................................................................................. 39
3
Download from Www.Somanuals.com. All Manuals Search And Download.
12.4. Function Settings ............................................................................................... 40
12.4.1. Group settings ....................................................................................... 40
12.4.2. Abbreviation .......................................................................................... 41
12.4.3. Abbreviation (Quick display function) .................................................... 42
12.4.4. Abbreviation (Function programming) ................................................... 43
12.4.5. Camera protocol ................................................................................... 45
12.4.6. Password .............................................................................................. 46
12.4.7. Focus speed ......................................................................................... 48
12.4.8. Buzzer tone ........................................................................................... 48
12.4.9. Key operation tone ................................................................................ 49
12.4.10. I/O speed ............................................................................................... 49
12.4.11. DVR check ............................................................................................ 49
12.4.12. Monitor lock ........................................................................................... 50
12.4.13. Language .............................................................................................. 51
12.4.14. Initial status ........................................................................................... 51
12.4.15. Joystick position adjustment .................................................................. 51
12.4.16. Expansion .............................................................................................. 51
CONNECTIONS
13. CONNECTIONS
13.1. Equipment Connections .................................................................................... 52
13.1.1. Combination camera ............................................................................. 52
13.1.2. Digital video recorder ............................................................................ 52
13.1.3. Interface unit ......................................................................................... 52
13.2. System Example
13.2.1. Basic system ......................................................................................... 53
13.2.2. Expanded Digital video recorder system (Cascade-connection) .......... 54
13.2.3. Connections between the Remote controller
and the Digital video recorder ...................................... 55
14. DIGITAL VIDEO RECORDER FAILURE INDICATION
14.1. Remote Controller Indication and Status ........................................................... 56
14.1.1. Stopping the buzzer tone ...................................................................... 56
WHEN YOU NEED HELP
15. TROUBLESHOOTING ..................................................................................... 57
16. OPERATION GUIDE ......................................................................................... 58
17. SPECIFICATIONS ............................................................................................. 60
Accessories .............................................................................................................. 60
Optional products ..................................................................................................... 60
4
Download from Www.Somanuals.com. All Manuals Search And Download.
1. SAFETY PRECAUTIONS
• Before installation or use, be sure to carefully read all the instructions in this section for correct and safe
operation.
• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
• We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety hazards.
Do not expose the unit to rain or an environment where it may be
splashed by water or other liquids, as doing so may result in fire or
electric shock.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
WARNING
result in death or serious personal injury.
When Installing the Unit
• This is a class A product. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
• Use the unit only with the voltage specified on the unit. Using a voltage higher than that which is specified
may result in fire or electric shock.
• Do not cut, kink, otherwise damage nor modify the power supply cord. In addition, avoid using the power
cord in close proximity to heaters, and never place heavy objects -- including the unit itself -- on the power
cord, as doing so may result in fire or electric shock.
• Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a slanted surface.
Doing so may result in the unit falling down and causing personal injury and/or property damage.
When the Unit is in Use
• If any of the following irregularities occurs, immediately switch off the power, disconnect the power supply
plug from the AC outlet and inform the shop from where the unit was purchased. Further using the unit may
result in fire or electric shock.
· If you detect smoke or a strange smell coming form the unit
· If water or any metallic object gets into the unit
· If the unit falls, or the unit case breaks
· If the power supply cord is damaged (exposure of the core, disconnection, etc.)
· If no audio signal outputs
· If no image appears
• To prevent a fire or electric shock, never open the unit case nor modify the unit as there are high voltage
components inside the unit. Refer all servicing to your nearest TOA dealer.
• Do not place cups, bowls, or other containers of liquid or metallic objects on top of the unit. If they
accidentally spill into the unit, this may cause a fire or electric shock.
• Do not touch the power supply plug or control line during thunder and lightning, as this may result in electric
shock.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
When Installing the Unit
• Never plug in nor remove the power supply plug with wet hands, as doing so may cause electric shock.
• When unplugging the power supply cord, be sure to grasp the power supply plug; never pull on the cord
itself. Operating the unit with a damaged power supply cord may cause a fire or electric shock.When
removing the power cord, be sure to hold its plug to pull.
• When moving the unit, be sure to remove its power supply cord from the wall outlet. Moving the unit with the
power supply cord connected to the outlet may cause damage to the power supply cord, resulting in fire or
electric shock.
• Avoid installing the unit in humid or dusty locations, in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or steam as doing otherwise may result in fire or electric
shock.
• Do not connect a network terminal exposed to excessive voltage to the DVR control output terminal A, as
doing so may result in fire or electric shock.
When the Unit is in Use
• Do not place heavy objects on the unit as this may cause it to fall or break which may result in personal
injury and/or property damage. In addition, the object itself may fall off and cause injury and/or damage.
• Use the dedicated AC adapter for the unit. Note that the use of other adapter may cause a fire.
• Clean the unit periodically. Contact your TOA dealer regarding the cleaning. If dust is allowed to accumulate
in the unit over a long period of time, a fire may result.
• If dust accumulates on the power supply plug or in the wall AC outlet, a fire may result. Clean it periodically.
In addition, insert the plug in the wall outlet securely.
• Switch off the power, and disconnect the power supply plug from the AC outlet when cleaning or leaving the
unit unused for long periods of time. Doing otherwise may cause a fire or electric shock.
CU version complies with Part 15 of the FCC Rules.
Note
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Modifications
Any modifications made to this device that are not approved by TOA Corporation may void the authority
granted to the user by the FCC to operate this equipment.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
2. GENERAL DESCRIPTION
TOA's C-RM1000 Remote Controller is used to remotely control TOA's 9-channel (C-DR091 series) or 16-
channel (C-DR161 series) Digital Video Recorders. It can also remotely control operation of Combination
cameras connected to the Digital Video Recorder. The C-RM1000 is equipped with a 3-axis joystick that
permits main operation to be performed with one hand.
3. FUNCTIONS
Digital Video Recorder Control
Digital Video Recorder's recording and playback operation can be remotely controlled by the Remote
Controller. It is also possible to display the Digital Video Recorder's menu to change settings.
Screen Display Operation
Camera images can be viewed in full-screen, 4-segment, 9-segment, or 16-segment split screen displays or in
sequential displays. (Monitor 2 output can provide only full-screen, 4-segment split screen, and sequential
displays.)
Combination Camera Operation
The Combination Camera's pan, tilt, and zoom operation, as well as focus and iris adjustments can be
remotely controlled. It is also possible to display the Combination Camera's menu to change settings.
Preset Position Programming and Playback
The Combination Camera's preset positions can be easily programmed. Images set to the preset position can
also be displayed on the monitor screen.
Abbreviation Number Function (Quick Display Function)
Digital video recorder numbers, camera numbers, and position numbers can be programmed into a function
key (F1 - F4) or number (1 - 508). Pressing the programmed key or number permits the corresponding
camera image to be displayed on the full screen.
Abbreviation Number Function (Function Programming)
Functions, such as Auto-focus, Auto operation, and electronic zoom, can be programmed into a function key
(F1 - F4) or number (1 - 508).
Digital Video Recorder Grouping
Two or more cascade-connected Digital Video Recorders can be grouped, allowing images of all Digital Video
Recorders in the group to be displayed on one master monitor. Further, multiple Digital Video Recorders can
be viewed in sequential order through group sequence.
Password Setting
Accessible functions can be restricted by setting a password. There are 3 operation levels and different
passwords can be set for each level.
Monitor Lock
Restricts operable monitors connected to the digital video recorder’s monitor outputs 1 and 2. This eliminates
the necessity of operation for switching the monitors and prevents malfunctions.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
4. HANDLING PRECAUTIONS
• Do not connect the AC adapter when using the supplied modular cable since the power is supplied from the
Digital Video Recorder.
• Do not connect the DVR Control Output Terminal A (RJ-11) to the telephone line.
• Do not lift the Remote Controller by joystick or subject the Controller to strong shocks. Damage may be
caused to the Controller.
• To clean the front panel, wipe with a soft cloth. Do not use thinner or alcohol.
• The Remote Controller is designed for indoor use, and cannot be used outdoors.
5. CONNECTABLE EQUIPMENT AND THEIR MAXIMUM NUMBERS
5.1. Equipment that can be controlled by the Remote Controller
The following equipment can be controlled by the Remote Controller.
Communication method
Communications method Type A:
Communications method Type A/B:
C-CC501, C-CC504, C-CC551, and C-CC554
C-CC514, C-CC564, C-CC714, and C-CC764
Up to 16 cameras (9 cameras when the 9-channel Digital Video Recorder is used) can be connected per
Digital Video Recorder for remote control.
Notes
• The Digital Video Recorder is required to perform control. Cameras cannot be connected directly to the
Remote Controller for remote control.
• Avoid connecting more cameras than the number of Digital Video Recorder channels to the camera's control
line. Any connected cameras exceeding the maximum number of available channels cannot be controlled.
• The combination camera available for type A and B is factory preset to type A (TOA-A). Use the DIP switch
to change to Type B, as required. (Refer to p. 45; Camera Protocol.)
• Multiple combination cameras using different communication methods cannot be connected to a single
digital video recorder. Match the communication methods of all connected cameras.
C-DR091 and C-DR161 Series Digital Video Recorders
Up to 8 C-DR091 or C-DR161 Series Digital Video Recorders can be connected to the Remote Controller to
remotely control cameras. The Digital Video Recorder's Camera Protocol is factory-preset to Type A (TOA-A).
C-RF1000 Interface Unit
Connecting the C-RF1000 Interface Unit to the Digital Video Recorder permits up to 4 Remote Controllers to
be connected. Connected remote controllers are operated on the last-in-first-out basis.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Definition
Digital Video Recorder number (DVR):
Refers to the DVR-ID number when the Digital Video Recorders are cascade-
connected.
Monitor number (MON): Refers to the Digital Video Recorder's monitor output number.
There are two monitor outputs: Monitor outputs 1 and 2.
Camera number (CAM): Refers to the camera video input terminal number connected to the Digital
Video Recorder.
Position number (POS): The Combination Camera's orientation can be programmed into a number (1 –
255).
Group number (G):
Group sequence:
Multiple cascade-connected Digital Video Recorders can be grouped. Up to 8
groups can be set.
A sequence of images from multiple Digital Video Recorders in the same group
can be displayed on the master monitor.
Cascade connection:
Images of up to 8 Digital Video Recorders can be monitored on a single
monitor. Images of up to 8 Digital Video Recorders can be switched and
cameras can be controlled by a single Remote Controller. (Refer to p.54;
Expanded Digital Video Recorder system, (Cascade-connection.))
Priority Recording:
Refers to the highest Priority Recording mode. Press the unit's Priority
Recording key to start recording.
Alarm Event Recording: Refers to the Alarm Recording and Motion-detected Recording.
Alarm Recording starts when an alarm signal enters an alarm input terminal of
the Digital Video Recorder or Combination Camera. Motion-detected Recording
starts when the Digital Video Recorder detects the movement of the camera
images.
Alarm hold:
The monitor display automatically switches when an alarm signal is received.
The Alarm Hold refers to the mode that prevents the screen from being
switched. Digital Video Recorder's Alarm Event Recording is performed even in
Alarm Hold mode.
Multi-segment split screen display:
Refers to the 4-segment, 9-segment, or 16-segment split screen.
Live mode:
Refers to the mode that displays the current camera images.
Refers to the mode that displays images recorded on a hard disk.
Playback mode:
Triplex mode:
Refer to the mode that simultaneously displays both playback and live screens.
Playback, live display, and video recording can be simultaneously performed.
Communication method: There are two types, A (TOA-A) and B (TOA-B). Operable functions differ
depending on the type. The camera, Digital Video Recorder and Remote
Controller must be identical in communication method. (Refer to p. 45; Camera
Protocol.)
Auto-function:
Auto-pan, Auto-trace, Preset sequence, and Tour. (Refer to p. 22; Auto-function
Operation.)
Monitor Lock:
Restricts operable monitors connected to the digital video recorder’s monitor
outputs 1 and 2. This eliminates the necessity of operation for switching the
monitors and prevents malfunctions.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
6. NOMENCLATURE AND FUNCTIONS
[ Top Panel ]
1
2
3
4
5
6
9
10
7
8
FOCUS
IRIS
UP
REMOTE CONTROLLER C-RM1000
PRIORITY
WIDE
TELE
DVR
MON
CAM
POS
REC
MENU
DVR MENU
CAM MENU
LEFT
RIGHT
SHIFT
1
2
5
8
0
3
6
9
SCREEN
MULTI
FULL
SEQUENCE
AUTO
4
7
C
DOWN
DVR
SEARCH
ALARM
BUZZER STOP
HOLD
PLAY
/
LIVE
RESET
SET
11
12
14
15 16
17
13
18
FULL
MULTI
SEQUENCE
AUTO
19
21
20
22
(1) LCD Screen
(5) Position Key [POS]
Use this key to play back or program the
Combination Camera's preset positions.
Displays the setting menu and data of operation
status, etc. using characters.
(2) Digital Video Recorder Key [DVR/DVR MENU]
Selects the Digital Video Recorder to be
controlled, and the DVR group number. Holding
down this key for 2 seconds or more displays
the menu of the Digital Video Recorder being
selected. This key lights red when the selected
Digital Video Recorder is in recording mode.
(6) Priority Recording Key [PRIORITY REC]
Perform priority recording. This key flashes
during priority recording. Holding down this key
for 2 seconds or more stops priority recording,
causing the key to remain unlit. (Refer to p. 25;
Video Recording.)
)
(7 Menu/Shift Key [MENU/SHIFT]
(3) Monitor Key [MON]
Menu
Switches the monitor to be operated by the
Remote Controller. The monitor toggles
between Monitor 1 and Monitor 2 each time the
Monitor key is pressed.
Holding down this key for 2 seconds or more
displays the menu screen on the LCD screen.
(Refer to p. 36; Settings.)
Shift
Use this key when viewing camera images in
multi-segment split screen displays of (19), (20)
and (21) or when selecting the DVR group
number
(4) Camera Key [CAM/CAM MENU]
Selects the camera number. Selected cameras
can be operated if they are Combination
Cameras. Holding down this key for 2 seconds
or more displays the menu of the Combination
Camera being selected.
Password
When passwords are valid, holding down this
key for 2 seconds or more displays the password
entry screen.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
(8) Joystick
In live mode
(14) Set Key [SET]
Use this key in conjunction with a ten-key
numerical pad to enter abbreviation numbers.
This key does not work even when pressed
without designating the abbreviated number.
While the menu is displayed, this key is used to
confirm settings.
Performs pan, tilt, and zoom operation of
connected Combination Cameras.
In playback mode
Performs playback, reverse playback, fast
forward playback, and pause operation.
(15) Search Key [SEARCH]
Displays the search menu.
In menu display mode
Moves the cursor (lever position: up, down, left,
or right) and confirms (clockwise lever rotation)
or cancels (counterclockwise lever rotation) the
setting.
(16) Playback/Live Key [PLAY/LIVE]
In playback mode
Switches playback to live mode.
The key remains lit while in playback mode.
Note
Settings cannot be confirmed (clockwise lever
rotation) or cancelled (counterclockwise rotation)
while the camera menu is displayed. Use the
SET key or C key for confirmation or cancellation.
In live mode
Switches live to playback mode, and playback
begins.
(9) Focus Key [FOCUS]
(17) Alarm Reset Key [BUZZER STOP/RESET]
Stops the buzzer tone. Holding down this key for
2 seconds or more stops alarm event recording.
The key flashes during alarm event recording or
when the Digital Video Recorder fails.
In live mode
Adjusts the Combination Camera's focus.
In playback mode
(only when temporarily stopped)
Performs instant event access playback.
(18) Alarm Hold Key [HOLD]
Prevents the Digital Video Recorder from
changing the screen when it receives an alarm
signal. The key lights while in alarm hold mode.
In menu display mode
Changes set values.
(10) Iris Key [IRIS]
(19) Full-Screen [FULL] /
In live mode
Adjusts the camera iris.
4-Segment Split-Screen Key
Displays the designated camera output on the
full screen. Pressing this key while the Shift key
continuously lights switches the screen to 4-
segment split -screen display.
Note
This key cannot be used when the communi-
cation method is set to Type A. (Refer to p. 45;
Camera Protocol.)
(20) Multi-Screen [MULTI] /
In playback mode
Performs playback from the earliest image, or
reverses playback from the latest image.
9-Segment Split-Screen Key
Displays connected camera outputs on the
multi-split monitor screen. The multi-split screen
display changes in sequence whenever this key
is pressed. Pressing this key while the Shift key
continuously lights switches the screen to 9-
segment split-screen display.
(11) Function Keys [F1
-
F4]
Abbreviation numbers are assigned to these
keys to perform quick display or function
programming.
(Refer to p. 42; Abbreviation Quick display
function, Refer to p. 43; Abbreviation Function
programming.)
(21) Sequence [SEQUENCE] /
16-Segment Split-Screen Key
Executes the sequential switching operation set
at the Digital Video Recorder. This key remains
lit during sequence operation. Pressing this key
while the Shift key continuously lights switches
the screen to 16-segment split-screen display.
(12) Clear Key [C]
Use this key to correct the wrong entry of a ten-
key numerical pad. While the menu is displayed,
this key is used to cancel settings.
(22) Auto Key [AUTO]
(13) Ten-Key Numerical Pad [0
-
9]
Sets the Combination Camera's auto function to
ON or OFF. This key continuously lights while
the camera is in auto operation mode.
Use this key to enter the DVR number, DVR
group number, camera number, position
number, or abbreviated number.
Note
Operation differs depending on the communi-
cations method. (Refer to p. 22; Auto-function
Operation.)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
[ Rear Panel ]
23
24
25
[ Bottom Surface Indications ]
GND
DVR CONTROL
DC IN
OUTPUT-A
DVR CONTROL
OUTPUT-B
Do not connect this jack
SER.
to telephone line.
REMOTE CONTROLLER
model C-RM1000 CU
12/13.8V
250mA
TOA Corporation
MADE IN JAPAN
(23) DVR Control Output Terminal B
(screwless type)
(25) AC Adapter Power Input Terminal
[DC IN 13.8 V]
Use this terminal when the supplied modular
cable cannot be used or when connecting the
Remote Controller to the interface unit. The
supplied AC adapter is required when using this
terminal.
Connect the DC plug of the dedicated AC
adapter to this terminal. Connect the AC adapter
when using the DVR Control Output Terminal B
(23).
(24) DVR Control Output Terminal A (RJ-11)
Use this terminal when connecting a single
Remote Controller to the Digital Video Recorder
within the distance of 3 meters (9.8 ft). Use the
supplied modular cable for connection.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
7. EQUIPMENT SELECTION
7.1. Digital Video Recorder Selection
[Example]
1. Press the desired Digital Video Recorder number using a
ten-key numerical pad.
7
2. Press the DVR key.
LCD screen
DVR
The selected Digital Video Recorder number is displayed
on the LCD screen. (The key cannot be used if the Digital
Video Recorder is not connected.) For monitors and
cameras, Monitor 1 and Camera 1 are automatically
selected.
7
1
1
DVR MENU
DVR
MON
CAM
POS
7.1.1. Group Selection (cascade connection only)
Notes
• Group settings must be performed in advance. (Refer to p. 40; Group Settings.)
• Screens are not switched during group selection even when an alarm signal is received or the priority
recording button is pressed.
[Example]
1. Press the Shift key.
MENU
SHIFT
MENU
SHIFT
2. Press the desired Digital Video Recorder group number.
2
3. Press the DVR key.
DVR
LCD screen
The indication "G_Group No." is displayed in the DVR
section of the LCD screen.
G
2
1
1
DVR MENU
DVR
MON
CAM
POS
7.2. Monitor Selection
Functions that can be displayed differ depending on the monitor output. (Refer to p. 15; Monitor display.)
Press the MON key.
The monitor output alternates between 1 and 2 each time the MON key is pressed, and the monitor number is
displayed on the LCD screen.
MON
MON
LCD screen
LCD screen
7
2
1
7
1
1
DVR
MON
CAM
POS
DVR
MON
CAM
POS
Note:
Be sure to set Monitor Lock if multiple Remote Controllers are connected in the system. (Refer to p.50;
Monitor Lock.)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3. Camera Selection
Select the camera to be displayed or operated.
[Example]
1. Press the camera number to be selected using the ten-key
numerical pad.
1
5
2. Press the CAM key.
The selected camera number is displayed on the LCD
screen (CAM section).
LCD screen
CAM
7
1
1 5
CAM MENU
DVR
MON
CAM
POS
Camera No.
displayed on the full screen
7.3.1. Quick group camera selection (available only when cascade-connected)
Specified cameras within the group can be selected using straight number entry. The selected camera images
are displayed in full-screen through the Monitor Output 1. Select the camera's serial number referring to the
system example below.
Note: Group settings must be performed in advance. (Refer to p. 40; Group Settings.)
Group 1
( System example )
1
-16
16-channel DVR 1
Remote Controller
10th
Combination Camera
10
16-channel DVR 2
1. Enter the serial number for the camera you want to select
using the ten-key numerical pad during group selection.
[Example]
Select the 10th camera connected to the Digital Video
Recorder 2 as in the system example. In a serial
numbering system, the 10th camera connected to the
Digital Video Recorder 2 becomes No. 26 by counting 16
cameras connected to the Digital Video Recorder 1 and 10
cameras connected to the Digital Video Recorder 2 (16 +
10 = 26).
2
6
LCD screen
CAM
G
1
1
2 6
CAM MENU
DVR
MON
CAM
POS
2. Press the CAM key.
The selected number is displayed on the LCD screen
(CAM).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
8. MONITOR DISPLAY
Functions that can be displayed differ between Monitor outputs 1 and 2.
Playback mode
9 Seg
4 Seg
Live mode
9 Seg
Electronic
Zoom
Cascade
output
Function
Full
4 Seg
Full
16 Seg* Sequence
16 Seg*
Monitor output 1
Monitor output 2
Digital Recorder
menu
Search
menu
Display position
setting screen
Triplex setting
screen
Archive
menu
Combination Camera
menu
Function
Monitor output 1
Monitor output 2
* Only the C-DR161 Series (16-channel versions) can display.
Note
Perform the monitor lock setting for the system using two or more remote controllers .This eliminates the
necessity of operation for switching the monitors and prevents malfunctions. (Refer to p.50; Monitor Lock)
8.1. Full Screen Display
[Example]
1. After selecting the Digital Video Recorder, enter the
camera number to be displayed.
LCD screen
1
5
1 5
7
1
1
DVR
MON
CAM
POS
2. Press the FULL key.
The designated camera's image is displayed on the
full screen and the FULL key lights. The camera
number is displayed on the LCD screen.
LCD screen
FULL
FULL
F U L L
7
1
1 5
DVR
MON
CAM
POS
Lights
Camera number
displayed on the full screen
Note
If only the FULL key is pressed, the camera image corresponding to the number shown in the CAM section of
the LCD screen is displayed on the full screen.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2. Multi-Screen Display
The screen switches as follows each time the MULTI key is pressed while in live or playback mode.
9-channel recorder
16-channel recorder
4 Seg B 4 Seg C
4 Seg A
4 Seg B
4 Seg A
16 Seg
4 Seg D
9 Seg
4 Seg C
9 Seg B
9 Seg A
Note: Monitor output 2 can display only live images in full-screen and 4-segment split-screen displays.
1. Press the MULTI key after selecting the Digital
Video Recorder.
Monitor screen
(4-segment split-screen A)
MULTI
MULTI
The MULTI key lights and camera Nos. 1-4
(4-segment split-screen A) are displayed on
the monitor.
1
2
Lights
3
4
Camera No.
2. Press the MULTI key.
Camera Nos. 5
are displayed on the monitor.
-
8 (4-segment split-screen B)
Monitor screen
(4-segment split-screen B)
MULTI
5
6
3. Repeat Step 2 to display the camera numbers
to be monitored.
7
8
The display cycles through multi-segment split
screens with each depression of the MULTI
key.
8.3. 4-Segment Split-Screen Display
MENU
SHIFT
1. Press the SHIFT key.
The key lights.
LCD screen
4
-
S E G M E N T
7
1
1 5
2. Press the FULL (4-Split-Screen) key.
The MULTI key lights and camera Nos. 1
Monitor screen
(4-segment split-screen A)
-4
(4-segment split-screen A) are displayed on
the monitor.
MULTI
FULL
1
2
Lights
3
4
3. Repeat Steps 1 and 2 to display the camera
number to be monitored.
Camera No.
The display cycles through individual 4-
segment split screens each time both the
SHIFT key and the FULL key are pressed.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
8.4. 9-Segment Split Screen Display
MENU
SHIFT
1. Press the SHIFT key.
The SHIFT key lights.
LCD screen
9
-
S E G M E N T
7
1
1 5
Monitor screen
(9-segment split screen A)
2. Press the MULTI (9-Split-Screen) key.
The MULTI key lights and Camera Nos. 1
MULTI
MULTI
1
2
5
8
3
6
9
-9
(9-segment split screen A) are displayed on
the monitor.
4
Lights
7
Camera No.
2-1. When the 16-channel recorder is used
Repeat Steps 1 and 2 to display the camera
numbers to be monitored. The display cycles
through individual multi-segment split
screens each time both the SHIFT key and
the MULTI key are pressed.
Monitor screen
(9-segment split screen B)
10
13
16
11
14
1
12
15
2
8.5. 16-Segment Split-Screen Display
1. Press the SHIFT key .
The SHIFT key lights.
LCD screen
MENU
1 6
-
S E G M E N T
7
1
1 5
SHIFT
MULTI
2. Press the SEQUENCE (16-Split-Screen) key.
The MULTI key lights, displaying all connected
cameras on the monitor screen.
Monitor screen
SEQUENCE
1
2
3
7
4
8
Lights
5
6
9
10
14
11
15
12
16
13
Camera No.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
8.6. Changing the Multi-Screen Display Position
Live and recorded images can be set to be displayed on user-specified split screen segments, and the display
position of the multi-segment split screen can be freely changed. For more information, please read the Digital
Video Recorder's instruction manual.
1. With the display mode set to live mode, display the multi-
L
1
L
2
segment split screen to be changed. (Refer to p. 16: Multi-
Screen Display.)
L
3
L
4
2. Hold down the MULTI key for 2 seconds or more.
The display position setting screen is displayed.
3. Move the cursor to the desired display position by tilting the
joystick up, down, left or right.
In multi-screen
display mode
MULTI
4. Enter the camera number using the ten-key numerical pad,
then press the FULL key.
5. Rotate the joystick counterclockwise or press the C key to exit the
position setting screen.
L
P
1
L
L
2
4
O
S
I
T
I
O
N
S
E
T
T
I
N
G
Notes
L
3
• If a live camera image is assigned to a split-screen segment
that has already been set to display another camera live
image, the original camera image will be replaced with the new
camera image.
• Display positions cannot be changed for Monitor output 2
images.
8.7. Sequential Display
Note
Sequential display settings must be performed for the Digital
Video Recorder in advance. Please refer to the instruction
manual enclosed with the Digital Video Recorder for more
information.
SEQUENCE
SEQUENCE
Press the SEQUENCE key after selecting the Digital Video
Recorder.
The SEQUENCE key lights, commencing sequential screen
switching programmed into the Digital Video Recorder.
Lights
[Example] Monitor screen
Camera No. 1
Camera No. 2
Camera No. 16
LCD screen
2
1
16
S E Q U E N C E
7
1
1 5
18
Download from Www.Somanuals.com. All Manuals Search And Download.
8.8. Group Sequential Display
Group sequential displays can be performed if "Group" has been selected in the Cascade Connection setting.
The Monitor 1 sequential display setting is used for the group sequence function.
Notes
• Sequential display settings must be performed in advance for the Digital Video Recorder. For the sequence
setting method, please refer to the instruction manual enclosed with the Digital Video Recorder.
• Set the security function of all digital video recorders within the group to operation level 1, 2 or 3. If the
operation level of a digital video recorder in the system is set to “full-lock,” the group sequence function
cannot be operated.
• Do not turn off the power to the digital video recorder or remote controller while the group sequence function
is in operation. If power is switched off, reactivate the power to all equipment components within the system.
SEQUENCE
SEQUENCE
Press the SEQUENCE key after selecting "Group."
The SEQUENCE key lights, commencing the group sequence.
Group sequence operation is shown below.
(1) DVR 1 performs its sequence.
Lights
(2) DVR 2 begins its sequence when DVR 1's sequence is completed.
(3) After the group’s last DVR’s sequence is completed, operation
returns to DVR 1, allowing the sequence to cycle through all
DVRs in the group.
LCD screen
S E Q U E N C E
G
1
1
1 5
[Example]
When DVR 1
-4 are assigned to Group 1;
(
)
Group sequence Master Monitor 1’s display oder
"DVR" represents the Digital Video Recorder.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
8.9. Zoom Display (Electronic zoom)
Live or recorded full-screen images can be viewed in 2X zoom display. Multiple-segment split-screens cannot
be zoomed.
Note
"Zoom ON" and "Zoom OFF" must be preprogrammed into a function key or abbreviation number.
(Refer to p. 43; Abbreviation (Function programming).)
1. Press the "Zoom ON"-preprogrammed function key or
abbreviation number.
F1
The arrow is displayed in the center of the screen.
OR
2. Using the joystick, move the pointer arrow to the center of the
area to be zoomed.
SET
7
3. Press the SET key.
The screen can be viewed in 2X zoom display with the pointer
arrow as a center.
SET
Note
Operating the joystick still permits the zoomed position to be
moved even after being zoomed.
F2
4. Press the "Zoom OFF"-preprogrammed function key or
abbreviation number to cancel the zoom display.
OR
SET
8
20
Download from Www.Somanuals.com. All Manuals Search And Download.
9. COMBINATION CAMERA OPERATION
The following camera operations can be performed when the Digital Video Recorder is in live mode and the
Combination camera is selected.
9.1. Camera Rotation and Zoom Operation Using the Joystick
Connected Combination cameras can be rotated in the desired direction and their zoom lenses operated
using the joystick.
After selecting the camera, tilt the joystick in the desired direction of movement. The camera moves in the
direction in which the joystick has been tilted.
[Example] Clockwise camera rotation
LCD screen
M A N U A L
7
1
1 5
DVR
MON
CAM
POS
Joystick
After selecting the camera, rotate the joystick.
Clockwise rotation selects the telephoto lens and counterclockwise rotation selects the wide-angle lens.
Wide angle
Telephoto
9.2. Focus Adjustment
When the Combination camera is connected, the lens focus can be adjusted using the FOCUS key.
After selecting the camera, press the FOCUS (+) or ( ) key.
-
FOCUS
Focus operation continues as long as the key is pressed.
Pressing the (+) key focuses the lens on distant objects, and
pressing the (-) key focuses on near objects.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
9.3. Iris Operation (Communication method: Type B only)
This iris can be adjusted using the IRIS key when the Combination camera is connected.
IRIS
+
After selecting the camera, press the IRIS ( ) or (
operation continues as long as the key is pressed. The ( ) key
opens the iris, and the ( ) key closes the iris.
-) key. Iris
+
-
9.4. Auto-Function Operation
Auto-functions can be operated using the AUTO key when the Combination camera is connected.
Note
Auto-functions operated with the AUTO key differ depending on the Combination camera's communication
method and setting contents. The auto function cannot be used for Type B (TOA-B) combination cameras,
even when “Auto key” is selected in the camera menu.
Auto-pan function:
Auto-trace function:
Automatically pans the Combination cameras.
Play back camera operations set at the Combination Camera.
Preset sequence function: Automatically displays camera images in preset sequential order set at the
Combination Camera.
Tour:
Plays back the images in conjunction with Preset Positions and Trace.
(C-CC514, C-CC564, C-CC714 and C-CC764 only)
Hold down the AUTO key
for 2 seconds or more.
Press the abbreviation
number or function key.
Press the AUTO key.
Commences auto-pan, auto-trace or
preset sequence operation. (depend-
ing on the Combination camera's
AUTO key function setting.)
Commences auto-pan, auto-trace
or preset sequence operations.
(Auto functions can be programmed
into an abbreviation number in the
Remote Controller abbreviation
number setting.)
Type A
(TOA-A)
Terminates auto operation.
Type B
Commences auto-pan operation.
(TOA-B)
The AUTO key remains lit during auto operation, and extinguishes when auto operation is completed.
9.5. Camera Position Selection
[Example]
1 After selecting the camera, press the position number
using the ten-key numerical pad.
2
5
5
2. Press the Position Selector key.
The selected camera position image is displayed.
LCD screen
POS
7
1
1 5
2 5 5
DVR
MON
CAM
POS
Note
If the communication method is Type B, pressing only the Position key (or Position 0) displays the home
position image.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
9.6. Focus Speed Settings
Camera focus speed can be set. (Refer to p. 48; Focus Speed.)
9.7. Utilization of the Abbreviation Number Function
By pressing the SET key after entering the preprogrammed abbreviation number using the ten-key numerical
pad, or by simply pressing the function key, the following camera operations can be performed:
(Refer to p. 34; Abbreviation (Function programming).) (Refer to p. 41; Abbreviation.)
• Display of the set camera image (DVR No., Camera No. and Position No.) on the monitor.
• Display of Digital Video Recorder number on the monitor.
• Auto-focus operation.
• Auto function operation.
• Camera’s auxiliary contact control.
• Electronic zooming.
9.8. Combination Camera Menu Display
The Combination Camera's menu screen can be displayed to perform preset position programming and other
settings. For details, please refer to the instruction manual enclosed with the camera.
Note
The menu screen can be displayed for the following camera model: C-CC501, C-CC504, C-CC514, C-CC551,
C-CC554, C-CC564, C-CC714 and C-CC764.
1. Select the camera for menu display. (Refer to p. 13; Equipment
Selection.)
CAM
2. Hold down the CAM MENU key for 2 seconds or more to display
the menu screen.
CAM MENU
Operate the Remote Controller as follows while the camera is
displayed:
• To change the setting contents, tilt the joystick up, down, left or
right.
C A M E R A M E N U
• To select the setting item, tilt the joystick up, down, left or right.
• To set the setting item, press the SET key.
• To return to the previous screen, press the C key.
• To clear numbers, press the C key.
• To enter camera numbers, use a ten-key numerical pad.
• To enter position numbers, use a ten-key numerical pad.
• To set zoom, rotate the joystick clockwise or counterclockwise.
P R E S E T
I D S E T T I N G
C A M E R A S E T T I N G
A U T O M O D E
A L A R M
A U X
T I M E R
M A N U A L
M A I N T E N A N C E
C A M
• To set focus, use the FOCUS (+) or (-) key.
Notes
• Settings cannot be cancelled or confirmed by rotating the joystick clockwise or counterclockwise while
the camera menu is displayed. Use either the C or Set key.
• When the camera’s communication system is set to Type B, if the cursor does not stop at each item in
the camera menu, but instead moves past, press the SHIFT key and operate the joystick while the
SHIFT key indicator is illuminated. This allows the cursor to stop at each item. When setting preset
positions or storing camera movement for a trace function, press the SHIFT key again to extinguish the
indicator first before performing such settings.
3. Hold down the CAM MENU key for 2 seconds or more to exit the menu screen.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
9.9. Storing the Preset Positions
The preset position can be stored on the camera menu, however it can be easily stored by performing the
following operation;
1. Select the camera for which the preset position is
programmed. (Refer to p. 13; Equipment Selection.)
2. Rotate the Combination camera to set it to the desired
angle of view.
[Example]
LCD screen
3. Enter a preset position number using the ten-key numerical
pad.
3
3
7
1
1 5
MENU
SHIFT
MENU
SHIFT
4. Press the SHIFT key.
The key lights.
Lights
POS
LCD screen
5. Hold down the POS key for 2 seconds or more.
The “PRESET MEMORY” indication is displayed on the
LCD screen.
P R E S E T M E M O R Y
9.10. Deleting preset position data (Communication method: Type B only)
Preset position data can be deleted by performing the following operations.
1. Enter the preset position number to be deleted using the
[Example]
LCD screen
ten-key numerical pad.
3
3
7
1
1 5
2. Press the SHIFT key.
The key lights.
MENU
SHIFT
MENU
SHIFT
Lights
3. Hold down the C key for 2 seconds or more.
The “PRESET ERASE” indication is displayed on the LCD
screen.
LCD screen
C
P R E S E T E R A S E
24
Download from Www.Somanuals.com. All Manuals Search And Download.
10. DIGITAL VIDEO RECORDER OPERATION
The following Digital Video Recorder operations can be performed using the Remote Controller:
10.1. Video Recording
Priority recording and auto-recording (Alarm event recording and Normal recording) modes are made
available to the Digital Video Recorder. For details, please refer to the instruction manual enclosed with the
Digital Video Recorder.
10.1.1. LED indication during recording
: Lights green
: Lights red
: Flashes red
: Remains unlit
* 2
PRIORITY
REC key
ALARM
DVR key
Status
RESET key
Normal recording in progress.
Priority recording in progress.
• Priority recording has been terminated by other Remote Controller
connected to the same system.
• Priority recording has been terminated by the Digital Video Recorder.
• Termination by the Digital Video Recorder's front panel-mounted Priority
recording key.
• Termination by the Digital Video Recorder's rear panel-mounted Priority
recording terminal.
* 1
• Termination due a lapse of the Priority recording time preset at the Digital
Video Recorder.
Alarm event recording in progress. (The Digital Video Recorder in alarm
event recording mode is displayed on the LCD screen.)
• Alarm event recording has been terminated by other Remote Controller
connected to the same system.
• Alarm event recording has been terminated by the Digital Video Recorder.
• Termination by the Digital Video Recorder's front panel-mounted Alarm
reset key.
* 1
• Termination due a lapse of the alarm recording time preset at the Digital
Video Recorder.
* 1
* 2
Continuously lights red during auto-recording.
The Alarm reset key also flashes red when the Digital Video Recorder fails. (Refer to p. 56 : Digital Video Recorder failure indication.)
10.1.2. Priority recording operation
For details, please refer to the instruction manual enclosed
with the Digital Video Recorder.
1. Press the PRIORITY REC key.
The PRIORITY REC key flashes and the buzzer tone
sounds, commencing Priority recording.
PRIORITY
REC
PRIORITY
REC
Flashes
2. Hold down the PRIORITY REC key for 2 seconds or more.
The key extinguishes, terminating Priority recording.
Notes
• Press the Alarm reset key to stop a buzzer during Priority
recording.
PRIORITY
REC
PRIORITY
REC
Flashes
• The PRIORITY REC key continuously lights when Priority
recording is terminated by the Digital Video Recorder. To
extinguish it, hold down the PRIORITY REC key for 2
seconds or more.
Extinguishes
25
Download from Www.Somanuals.com. All Manuals Search And Download.
10.1.3. Resetting alarm event recording
The Alarm reset key flashes and the buzzer tone sounds during Alarm event recording. Alarm event recording
cannot be initiated by the Remote Controller. For the method of starting the Alarm event recording, refer to the
instruction manual enclosed with the Digital Video Recorder. For the operations of the unit while in alarm
mode, refer to p. 34; Alarm Operations.
Hold down the Alarm reset key for 2 seconds or more.
The Alarm reset key extinguishes and the buzzer stops, terminating
Alarm event recording.
BURZZEESRESTTOP
BURZZEESRESTTOP
Notes
• Press the Alarm reset key to stop a buzzer during Alarm event
recording.
• The Alarm reset key lights when Alarm recording is terminated by
the Digital Video Recorder. To extinguish it, hold down the Alarm
reset key for 2 seconds or more.
10.1.4. Making normal recording
By performing the menu setting for the Digital Video Recorder, the schedule of Normal recording can be set.
Using the Remote Controller, display the Digital Video Recorder menu to set it. For details, please refer to the
instruction manual enclosed with the Digital Video Recorder.
10.2. Playback Operation
10.2.1. Playback mode settings
Press the PLAY/LIVE key.
PLAY / LIVE
PLAY / LIVE
Live mode is switched to the playback mode, commencing
playback.
The PLAY/LIVE key remains lit while in playback mode. Pressing
the PLAY/LIVE key again switches playback to live mode.
Lights
Notes
• Tilting the joystick to the right while in playback
mode also permits playback to begin.
• Playback begins from the position at which
playback last stopped.
Live mode
Playback mode
L 4
L 5
L 7
P B 4
P B 5
L 6
P B 6
P B 7
"L" stands for the live screen while "PB" stands
for the playback screen.
10.2.2. Reverse playback
Tilt the joystick to the left while in playback mode. Reverse playback begins.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
10.2.3. Stop operation
PLAY / LIVE
PLAY / LIVE
Press the PLAY/LIVE key while in playback mode.
Playback stops, switching to live mode. The
PLAY/LIVE key remains unlit while in live mode.
Lights
Playback mode
Extinguishes
Live mode
L 4
L 5
L 7
P B 4
P B 5
L 6
P B 6
P B 7
10.2.4. Forward/reverse quick playback
Leave the joystick tilted to the left or right during
playback. The left-tilt position permits fast reverse
playback and the right-tilt position permits fast
forward playback. Depending on the angle of
joystick tilt, playback speed varies 2-fold (2X), 4-fold
(4X), or 8-fold (8X). Returning the joystick to the
central position causes playback to progress at
normal speed.
Reverse playback
Playback
8-fold 4-fold 2-fold Standard
Standard 2-fold 4-fold 8-fold
Note
Playback speed can be fixed by pressing the SET
key during 2-fold (4-fold or 8-fold) playback. To
reset, tilt the joystick to the left or right.
10.2.5. Time skip forward/reverse playback
Rotate the joystick clockwise. Playback skips
forward in 1-minute/10-minute segments.
Reverse playback
Playback
1-minute
1-minute
Rotate the joystick counterclockwise. Playback skips
backward in 1-minute/10-minute segments.
skip advance
skip reverse
10-minute
10-minute
skip advance
skip reverse
Note
Pressing the SET key during time skip (1 or 10
minutes) playback causes time skip playback to
continue even if the joystick is returned to the
central position. To reset, tilt the joystick to the left
or right.
10.2.6. Pause operation
To temporarily stop playback, tilt the joystick down
during playback. Tilting the joystick up while playback is
temporarily stopped cancels pause mode, commencing
playback (reverse playback).
Cancels pause mode.
Pause mode
27
Download from Www.Somanuals.com. All Manuals Search And Download.
10.2.7. Frame advance/reverse playback
Tilt the joystick to the left or right while playback is
temporarily stopped.
Frame reverse
Frame advance
The left-tilt position permits frame reverse playback,
and the right-tilt position permits frame forward
playback.
In pause
10.2.8. Instant event access playback
FOCUS
FOCUS
Press the FOCUS (+) key while playback is temporarily
stopped. Playback temporarily stops at the beginning of
the next event.
In pause
Press the FOCUS (-) key while playback is temporarily
stopped. Playback temporarily stops at the beginning of
the previous event.
In pause
In pause
10.2.9. Earliest image playback
Press the IRIS (+) key. Playback is started with the earliest
recorded image.
IRIS
Note
Earliest image playback cannot be operated during
recording if the Digital Video Recorder's mode is set to
Overwrite.
10.2.10. Latest image revers playback
IRIS
Press the IRIS (-) key. Reverse playback is started with
the latest recorded image.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
10.3. Search Operation
It is possible to search recorded images by date, time, or event. For
details, please refer to the instruction manual enclosed with the Digital
Video Recorder.
SEARCH
SEARCH
1. Press the Search key. The search menu is displayed
Operate the Remote Controller as follows while the search menu is
being displayed:
• To move the cursor, tilt the joystick up, down, left, or right.
• To confirm settings, rotate the joystick clockwise or press the SET
key.
• To cancel settings, rotate the joystick counterclockwise or press the
C key.
• To change settings, use the FOCUS (+) or (-) key.
Note
Executing a search places the display in playback mode, causing
playback to temporarily stop at the searched position.
2. Tilt the joystick to the left to exit the search menu. It is also possible
to search the search menu by rotating the joystick counterclockwise
or pressing the C key.
10.4. Digital Video Recorder Menu Display
Display the Digital Video Recorder's menu and perform various settings
for the Digital Video Recorder.
1. Select the Digital Video Recorder for menu display.
(Refer to p. 13; Equipment Selection.)
DVR
2. Hold down the Menu key for 2 seconds or more to display the Digital
Video Recorder's menu.
The menu is displayed on the monitor.
DVR MENU
Operate the Remote Controller as follows while the menu is being
displayed:
• To move the cursor, tilt the joystick up, down, left, or right.
• To confirm the setting, rotate the joystick clockwise or press the
SET key.
• To cancel the setting, rotate the joystick counterclockwise or press
the C key.
• To change the setting, use the FOCUS (+) or (
-) key.
3. Tilt the joystick to the left to exit the menu.
It is also possible to exit the menu by rotating the joystick
counterclockwise or pressing the C key. If any change has been
made to the settings, save the changed setting before exiting the
menu.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
10.5. Motion Detection Area Settings
Motion detection areas can be set on the digital video recorder menu. For more information, please refer to
the digital video recorder’s instruction manual.
1. Display the motion detection area setting screen using the digital
video recorder menu.
Operate the Remote Controller as follows while the menu is being
displayed:
• To move the cursor, tilt the joystick up, down, left, or right.
• To select or cancel an area plotting square, rotate the joystick
clockwise or press the SET key. (ON: Green; OFF: Nothing
displayed.)
• To select or cancel a wide range detection areas diagonally, rotate
the joystick clockwise or press the SET key at a starting point.
Move the cursor to an ending point. Then, press the SEARCH key,
or rotate the joystick clockwise after lighting the SHIFT key.
(ON: Green; OFF: Nothing displayed.)
• To change the sensitivity, press the FOCUS (+) key.
• To change the motion activation mode, press the FOCUS (–) key.
2. Rotate the joystick counterclockwise or press the C key.
The message to confirm if set data is saved is displayed and the
display returns to the previous screen.
10.6. Archiving
Images recorded on the Digital Video Recorder can be archived to a
DVD-R disk or USB flash drive. For details, please refer to the
instruction manual enclosed with the Digital Video Recorder.
1. Hold down the Menu key for 2 seconds or more during a playback
pause.
The archive menu is displayed.
In pause
MENU
Operate the Remote Controller as follows while the archive menu is
being displayed:
SHIFT
• To move the cursor, tilt the joystick up or down.
• To set the start (end) position, rotate the joystick clockwise or press
the SET key.
• To select the camera, use the FOCUS (+) or (-) key.
• To transfer files, rotate the joystick clockwise or press the SET key.
Note
The pause time is entered for the start (end) position time. To
change the time, return to playback mode, temporarily stop at the
desired time, and then display the archive menu again.
2. Tilt the joystick to the left. The archive menu is closed, returning the
display to playback mode. It is also possible to exist the archive
menu by rotating the joystick counterclockwise or pressing the C key.
Notes
• Recorded images cannot be played back during archiving.
• To stop archiving, press the SHIFT key, then press the ALARM RESET key after the LED has lit.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
10.7. Triplex Settings
Live images can be assigned to any segment of the screen while recorded images are played back on the
multi-segment split screen. For details, please read the instruction manual enclosed with the Digital Video
Recorder.
1 Hold down the MULTI key for 2 seconds or more while recorded
In multi-screen
images are played back on the multi-segment split screen.
The Triplex setting screen is displayed.
display mode
MULTI
Operate the Remote Controller as follows while the Triplex setting
screen is being displayed:
• To move the cursor, tilt the joystick up, down, left or right.
• To view live images, enter the camera number for live display using
the ten-key numerical pad, then press the FULL key.
• To return to recorded image playback, select the live image, then
press the SEQUENCE key.
2. Rotate the joystick counterclockwise or press the C key to exit the
Triplex setting screen.
Note
Reset all live images to recorded images on the Triplex setting screen
in order to switch Triplex mode to playback mode.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
10.8. Entering the Digital Video Recorder Password
When “Remote access restriction” is set to ON in the Digital Video Recorder’s security settings and a
password is valid, only the Digital Video Recorder’s current operation level can be accessed. To change the
Digital Video Recorder’s operation level, perform the following procedure. For the Remote Controller’s login
and logout method, refer to p.33; Login and Logout.
Note
When “Remote access restriction” is set to OFF, the Remote Controller can operate the Digital Video
Recorder.
10.8.1. Log-in
DVR
1. Hold down the DVR MENU key for 2 seconds or more.
The “LOGOUT”/”LOGIN” selection screen is displayed on the
monitor.
DVR MENU
Note
If logged out, the password entry screen is immediately displayed
when the DVR MENU key is continuously pressed for 2 seconds or
more.
L
O
G
O
U
T
L
O
G
I
N
2. Select “LOGIN” using the joystick and press the SET key.
The password entry screen is displayed.
3. Select [_ _ _ _ _ _] using the joystick, enter a password, and press
the SET key.
When entering the password, press the FULL key after entering each
numeral for confirmation. The [ ] mark is displayed for each entered
numeral.
P
L
E
A
S
E
P
A
S
S W O
R
D
E
N
T
R
Y
.
_
_
_
C
L
E
A
R
C
A
N
C
E
L
[Example] When the password is “123456”.
FULL
FULL
FULL
FULL
FULL
FULL
SET
1
2
3
4
5
6
10.8.2. Log-out
1. Hold down the DVR MENU key for 2 seconds or more.
DVR
The “LOGOUT”/”LOGIN” selection screen is displayed on the
monitor.
DVR MENU
Note
When the operation level is set to Level1, holding down the DVR
MENU key for 2 seconds or more displays the screen for selecting
either LOGOUT or MENU.
2. Select LOGOUT using the joystick, then press the SET key.
Operation level changes to the lowest set operation level.
L
O
G
O
U
T
M
E
N
U
C
A
N
E
32
Download from Www.Somanuals.com. All Manuals Search And Download.
11. OTHER OPERATIONS
11.1. Log-In and Log-Out
If a password has been set, it is possible to log in to or log out of each operation level by following the
procedures below. For password settings, please refer to p. 46; Password. For the Digital Video Recorder’s
login and logout method, refer to p. 32; Entering the Digital Video Recorder Password.
11.1.1. Log-in
MENU
SHIFT
1. Hold down the Menu key for 2 seconds or more.
The “PASSWORD” indication is displayed on the LCD screen.
Note
Holding down the Menu key for 2 seconds or more when set to
the lowest operation level immediately displays the password
entry screen.
P A S S W O R D
L O G I N
2. Select LOGIN using the joystick and press the SET key.
The password entry screen is displayed.
3. Enter one of password 1-3, and press the SET key.
Access is given to the operation level corresponding to the
entered password. (Refer to p. 46; Password.)
P A S S W O R D
P A S S W O R D
11.1.2. Log-out
MENU
SHIFT
1. Hold down the Menu key for 2 seconds or more.
The “PASSWORD” indication is displayed on the LCD screen.
Note
Holding down the Menu key for 2 seconds or more when the
operation level is set to Level 1 displays the screen for selecting
either “LOGOUT” or “RM MENU”.
P A S S W O R D
L O G O U T
2. Using the joystick, select LOGOUT, then press the SET key.
The system logs out to the lowest set operation level. (Refer to p.
46; Password.)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
11.2. Abbreviation Number
This function permits quick dialing preprogrammed into a number. Camera images (DVR No., monitor No.,
camera No., and position No.) and the functions of the Combination Camera and Digital Video Recorder can
be programmed into a number. (Refer to p. 43; Abbreviation (Function programming).)
[Example]
1. Enter the abbreviation number using the ten-
key numerical pad.
LCD screen
1
5
1 5
2. Press the SET key. Operation preprogrammed
into the selected number is executed.
LCD screen
A U T O F O C U S
Note
SET
Abbreviated numbers are assigned by default.
(Refer to p. 44; Default abbreviation number
settings.)
11.3. Alarm Operations
11.3.1. When alarm is triggered
The Alarm Reset key flashes red and a buzzer tone sounds, causing the alarm-activated Digital Video
Recorder number to be displayed on the LCD screen. The Digital Video Recorder begins alarm event
recording and displays the alarm-activated camera image on the full screen through Monitor Output 1.
Note
The number of the camera displayed full-screen on the monitor is not displayed on the remote controller’s
liquid crystal display. To display it in order to operate that camera, change the camera number displayed on
the remote controller’s LCD.
BURZZEESRESTTOP
BURZZEESRESTTOP
• Alarm type indication
Digital Recorder’s alarm input terminal
received an alarm signal.
Flashes
A L M T M
• Normal display
• Indicates the number of the
Digital Recorder recording
an alarm event
Digital Recorder’s motion detector
activated.
LCD screen
1 second
1 second
A L A R M
A L M M D
1
1
1
D V R
1
Combination Camera’s alarm input
terminal received an alarm signal.
A L M C M
1 second
Notes
• For Monitor Output 2 images, the screen display is not switched even when an alarm signal is received.
• When digital video recorders are connected to remote controllers in cascade, the digital video recorder
currently in alarm mode is displayed on the master monitor screen. However, it is not automatically
displayed when the digital video recorder group has been selected for the remote controller.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
11.3.2. To stop a buzzer tone
BURZZEESRESTTOP
Press the RESET key to stop the buzzer tone.
11.3.3. To reset alarm
BURZZEESRESTTOP
BURZZEESRESTTOP
Hold down the RESET key for 2 seconds or more while alarm
is being activated.
The RESET key extinguishes, canceling the alarm mode.
Note
Alarm cannot be reset when “Level” has been selected in the
Digital Video Recorder’s alarm settings. The alarm status
continues as long as the alarm signal is received.
11.3.4. Putting screen switching on hold when an alarm occurs
When an alarm occurs, the screen display is automatically switched from the camera images through Monitor
Output 1 to the alarm triggered camera images in full-screen. Press the HOLD key to put the current screen
display on hold, disabling automatic screen switching.
Notes
• Camera shift to the preset position programmed on the Digital Video Recorder is also put on hold. Alarm
action programmed on the Combination Camera cannot be put on hold.
• When digital video recorders are connected to remote controllers in cascade, the display on the master
monitor cannot be retained.
1. Press the HOLD key.
The HOLD key lights, putting the automatic screen
switching to the alarm-triggered screen display on hold.
HOLD
HOLD
Note
Lights
The screen cannot be switched due to alarm signal
reception, alarm reset nor elapse of post-time while the
HOLD key lights.
2. Hold down the HOLD key for 2 seconds or more.
The HOLD key extinguishes, enabling automatic screen
switching when an alarm signal is received.
HOLD
HOLD
Extinguishes
35
Download from Www.Somanuals.com. All Manuals Search And Download.
12. SETTINGS
12.1. Setting Item Summaries
Remote Controller Menu Display (Hold down the Menu key for 2 seconds or more.)
Setting Item
Description
Two or more cascade-connected Digital Recorders can be assigned to a group.
1. Setting
Group
It is also possible to restrict access to operation of the Remote Controllers in each group.
2. Transfer
Transfers data to copy already programmed group settings to two or more Remote Controllers
via the C-RF1000 Interface Unit.
3. Erase
Deletes all group settings at a time.
1. Setting
2. Transfer
Operations and functions can be programmed into a function key (F1-F4) and a number (1-508).
Abbreviation
Transfers data to copy already programmed abbreviation settings to two or more Remote
Controllers via the C-RF1000 Interface Unit.
3. Erase
Deletes all abbreviation settings at a time.
Selecting the Camera protocol converts the data programmed into F1 - F4 keys and
abbreviation number settings into the data for the selected protocol.
Camera Protocol
Password
1. Operation Level 1
2. Operation Level 2
Permits access to all function operations. Menus can be displayed, settings can be performed,
and data can beꢀarchived to a USB flash drive or DVD.
Access is restricted to live mode and playback mode operations, camera operations, and alarm
reset. Menus cannot be displayed, settings cannot be changed nor can data be archived to the
USB flash drive or DVD.
3. Operation Level 3
4. Log-out time.
Permits only live image screen viewing.
The interval from log-in to log-out can be set. If no operations areꢀperformed for a pre-set period
of time after log-in, the systemꢀautomatically logs out, moving to the lowest set operation level.
5. Priority recording
operator Level 3
Either “Valid” (ON) or “Invalid” (OFF) can be selected for authorization of access to the
Priority Recording key.
Focus Speed
Buzzer
Lens speed when using the Focus key can be adjusted in 4 steps.
The buzzer tone can be set to ON or OFF.
The key operation tone can be set to ON or OFF.
Sets the transfer rate of data from the control output terminal.
Key Operation Tone
I/O Speed
DVR Check
Confirms whether or not the Digital Recorder is connected to the Remote Controller.
1. Key
Permits the current screen to be held or switched to an alarm screen by key operation when
alarm is activated.
Hold
2. Always
Continues to retain the screen displayed before alarm activation without switching when alarm
is activated.
Multiple Remote Controllers can be individually set to enable orꢀdisable remote operation
of the Digital Recorder's connected monitor.
Monitor Lock
Language
1. English
2. French
Selects the language to be displayed on the LCD screen.
Returns settings to default conditions.
Initial Status
Automatically adjusts the joystick's central position.
Joystick Position Adjustment
Expansion
Cannot be used.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
12.1.1. Remote controller menu list
Group No. – Control ON/OFF
Group
1. Setting
DVR No.– Channel No. selection
RM RF
RM RF
2. Transfer
3. Erase
NO
YES
Abbreviation No. – Quick display settings
Abbreviation
1. Setting
2. Transfer
RM RF
RM RF
NO
3. Erase
YES
Camera Protocol
Password Menu
TOA-A
TOA-B
BOSCH
PELCO-D
Invalid
1. Operation level 1
2. Operation level 2
3. Operation level 3
Valid – Password entry
Invalid
Valid – Password entry
Invalid
Valid – Password entry
OFF/ 1MIN / 5MIN/ 10MIN/ 30MIN/ 60MIN
4. Log-out time
1. ON
5. Priority recording operator level 3
2. OFF
Focus Speed
1. ON
Buzzer
2. OFF
1. ON
Key Operation Tone
I / O Speed
2. OFF
9600
19200
36400
DVR Check
Hold
DVR No. entry — ON/OFF
DVR No. entry — ON/OFF
1. Key
2. Always
LOCK
Monitor Lock
Language
DVR No. – MON No. entry
UNLOCK
1. English
2. French
Execution
Execution
Initial Status
Joystick Position
Adjustment
Expansion
(Cannot be used.)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
12.2. Setting Keys and Display Screen
[Keys to be used for settings]
LCD screen
Displays setting items and contents.
Shift/ Menu key
Displays the Remote Controller
menu on the LCD screen or
closes the menu. (Refer to p. 33;
Log-In and Log-Out.)
FOCUS
RIGHT
IRIS
UP
REMOTE CONTROLLER C-RM1000
WIDE
TELE
PRIORITY
REC
DVR
MON
CAM
POS
MENU
SHIFT
DVR MENU
CAM MENU
LEFT
F1
F2
F3
F4
1
2
5
8
0
3
6
9
SCREEN
MULTI
FULL
SEQUENCE
AUTO
HOLD
4
7
C
DOWN
Joystick
DVR
SEARCH
ALARM
BUZZER STOP
PLAY
/
LIVE
RESET
Moves the cursor or selects
the setting items or contents.
SET
Set Key
Confirms the setting items or contents.
Clear Key
Cancels the setting items
or contents or numerical
values entered with a
numerical keypad.
Ten-Key Numerical Pad
Used to enter a number.
[ LCD screen display ]
Setting item
G R O U P
1 . S E T
Setting content
38
Download from Www.Somanuals.com. All Manuals Search And Download.
12.3. Basic Setting Operations
Here, basic operating procedures for each setting item are described. Enter a password to log in to Operation
Level 1 and display the Remote Controller’s menu. Refer to p. 33; Log-in and Log-out for the log-in method.
12.3.1. Displaying the menu
Note
While the digital video recorder is displaying each menu (Search Menu, Triplex Menu, or Archive Menu) or
while the combination camera’s camera menu is being displayed by the remote controller, the remote
controller’s menu cannot be activated even if the remote controller’s menu key is pressed.
1. Hold down the Menu key for 2 seconds or more. If no
MENU
password has been set, the Remote Controller’s
menu screen is displayed.
P A S S W O R D
L O G O U T
SHIFT
2. Select “RM MENU” using the joystick.
P A S S W O R D
R M M E N U
3. Rotate the joystick clockwise or press the SET key to
confirm the selection.
The menu screen is displayed.
G R O U P
SET
12.3.2. Operation during menu display
(Example)
1. Select the setting item using the joystick.
B U Z Z E R
1 . O N
2. Confirm the selected setting item by rotating the
joystick clockwise or using the SET key. Rotate the
joystick counterclockwise or press the C key to
cancel the selection.
B U Z Z E R
SET
. O N
3. Select the setting contents using the joystick.
B U Z Z E R
. O F F
4. Press the SET key to confirm the selected setting
contents.
5. To continue settings of other items, repeat Steps 2-5.
B U Z Z E R
SET
Hold down the Menu key again for 2 seconds or
more to return to the normal screen after setting
completion.
2 . O F F
Note
Numerals can be entered using the joystick or
numerical keypad.
12.3.3. Closing the menu
Hold down the Menu key for 2 seconds or more while the menu is displayed. The display reverts to the screen
shown before the menu was displayed.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
12.4. Function Settings
Follow the instructions in p. 39; Basic Setting Operations to perform the following menu displays and
operations.
12.4.1. Group settings
Assigning two or more Digital Video Recorders to the same group permits their images to be viewed on a
single monitor. Up to 8 groups can be set.
Notes
• The group setting can only be performed in DVR ID numerical order, and can only be performed in
consecutive numbers.
• When multiple Remote Controllers are connected, match the group settings of each Remote controller.
Otherwise, the camera images cannot be displayed correctly on the monitor.
[ Setting contents ]
1. Setting
Performs settings of the Digital Video Recorder groups and their control.
Transfers group setting data to other Remote Controller via the C-RF1000
Interface Unit.
2. Transfer
3. Erase
Deletes all group settings.
Group No.
When selecting “Setting” …
Control
S E T
D V R
1
O N
[ON] [OFF]
1. Select [GROUP] while the menu is displayed and press the
SET key. The setting content is displayed on the second
line.
2
1 6
No. of DVR channels
DVR No. or “Next”
2. Select [1. SET] and Press the SET key. The group number
flashes, permitting the current group setting contents to be
checked.
G R O U P
. S E T
3. Press the SET key to perform settings in succession from
Group 1.
2
3
4
S E T
1
1
4. Select Control ON or OFF and press the SET key.
ON: The group being set can be operated.
OFF: The group being set cannot be operated.
S E T
1
1
1
N
O N
O N
5. Select the DVR number and press the SET key.
6. Set the number of DVR channels by selecting either 9 or
16 and press the SET key.
S E T
D V R
7. To continue to assign the next DVR to the group, select the
DVR number and press the SET key.
5
Repeat Steps 5 and 6 to perform settings.
S E T
D V R
8. To set the next group, select [NEXT] and press the SET
key.
1
1
6
The next group number is displayed, and the Control
ON/OFF selection screen appears. Repeat Steps 4
-6.
S E T
1
3
O N
O N
D V R E X T
9. Assign all of DVRs 1
key.
-8 to any group, then press the SET
8
S E T
D V R
8
1 6
40
Download from Www.Somanuals.com. All Manuals Search And Download.
When selecting “Transfer”…
1. Select [GROUP] while the menu is displayed and press the SET key.
The setting content is displayed on the second line.
G R O U P
. T R A N S F E R
2. Select [2. TRANSFER] and press the SET key.
T R A N S F E R
. R M R F
3. Select EITHER [RM RF] or [RM RF] and press the SET key.
The “TRANSFERRING...” indication is displayed while data is being
transferred, and the “TRANSFER COMPLET” indication is displayed
when the transfer is completed.
[RM RF] : Transmits data to the interface unit.
[RM RF] : Receives data from the interface unit.
When selecting “Erase”…
1. Select [GROUP] while the menu is displayed and press the SET key.
The setting content is displayed on the second line.
2. Select [ERASE] and press the SET key.
G R O U P
. E R A S E
3. Select [YES] or [NO] and press the SET key.
[YES] : Deletes the setting and resets to default conditions.
[NO] : Does not delete the setting.
Note
Default settings: Group: 1, DVR: 1 - 8, Control: ON, Number of the Channels: 16
12.4.2. Abbreviation
[ Setting contents ]
Programs the abbreviation numbers into the Remote Controller. The following two
functions can be assigned to abbreviation settings: Quick display function and
Function programming.
1. Setting
Transfers Abbreviation settings to other Remote Controllers via the C-RF1000
Interface unit. Transfer method is the same as that of group settings.
2. Transfer
3. Erase
Erases all abbreviation settings. Function programming settings return to the
default setting.
Note
Abbreviation settings programmed into a single Remote Controller can be easily transferred to multiple
Remote Controllers. Set Monitor Lock for each Remote Controller.
If an abbreviation-set monitor is locked, camera images are displayed in full screen on an unlocked Monitor
instead when the abbreviation-set monitor is called. So, you do not need to change the abbreviated number to
call the unlocked monitor.
Follow the procedures below to perform settings.
1. Set Monitor lock for the monitor not to be operated by each Remote Controller.
(Refer to p.50; Monitor Lock)
2. Program the abbreviation number setting into one Remote Controller.
(Refer to p.42; Abbreviation, "Quick Display function.")
3. Transfer the abbreviation number settings to each Remote Controller.
(Refer to p.41; When selecting "Transfer"...)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
12.4.3. Abbreviation (Quick display function)
Camera images (DVR, monitor, camera and position numbers) can be displayed in the full screen on the
monitor by simply pressing a preprogrammed abbreviation number (numerical keypad entry and the SET key).
The abbreviation numbers that can be used for this function are Nos. 1
totaling 512 possible selections.
-508 and functions keys F1-F4,
Quick display setting screen
Abbreviation Nos.
508 and F1 F4
S E T
D
1
-
-
M
C
P
Position No.
DVR No.
Monitor No.
Camera No.
1. Select [ABBREVIATION] while the menu is displayed
and press the SET key.
S E T
D
M
C
P
2. Select [1. SET] and press the SET key.
(Example)
3. Enter an abbreviation number and press the SET
key.
SET
1
8
3
Numbers from 1-508 can be entered, and function
keys F1-F4 can be selected with the joystick.
SET
Pressing the SET key moves the flashing cursor to
the second line.
4
4. Display the quick display setting screen and press
the SET key.
S E T
D
1 8
M
C
P
(Example)
5. Enter a DVR number and press the SET key.
Use numbers 1-8. The flashing cursor moves to the
monitor number indication.
SET
SET
7
5
6. Enter a monitor number and press the SET key.
The flashing cursor moves to the camera number
indication.
S E T
1 8
D
7
M
C
P
(Example)
Note
1
6
If the entered monitor number is the number of the
monitor locked, the camera images are quickly
displayed on the unlocked monitor.
S E T
1 8
D
7
M
1
C
P
7. Enter a camera number and press the SET key.
Use numbers 1-16. The flashing cursor moves to
the position number indication.
(Example)
SET
SET
1
1
5
7
8. Enter a position number and press the SET key.
Use numbers 0-255.
S E T
1 8
Notes
D
7
M
C 1 1 P
81
• Do not enter the position number for cameras for
which no camera position has been set.
• Pressing “0” sets the Combination Camera to the
home position.
(Example)
2
9. To continue abbreviation number settings, repeat
Steps 3-8. Press the C key to return to the setting
item display.
S E T
1
D
7
M
1
C 1 1 P 2 5
Note
To delete the displayed abbreviation setting, hold on
the C key for 2 seconds or more.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
12.4.4. Abbreviation (Function programming)
The functions of the Combination Camera and Digital Video Recorder can be programmed into an
abbreviation number (1-508 and F1-F4 keys).
Note
The Combination Camera's protocol must be selected before performing abbreviation number settings. If the
protocol is selected, this permits the available functions to be selected for the camera.
1. Select [ABBREVIATION] while the menu is
displayed and press the SET key.
Function programming screen
2. Select [1. SET] and press the SET key.
Abbreviation Nos.
S E T
1
-508 and F1-F4
3. Enter an abbreviation number and press the SET
key.
Use numbers 1-508. The F1-F4 keys can be
A U T O F O C U S
Function name
selected with the joystick. Pressing the SET key
moves the flashing cursor to the second line.
4. Select the function to be programmed and press
the SET key.
Functions that can be set are as shown in the
table below.
5. To continue to set abbreviation numbers, repeat
Steps 3 and 4. To return to the setting item
display, press the C key.
When the camera's protocol is TOA-A (Type A)...
Function Name
Function Name
AUX1 OFF
AUX2 ON
AUX2 OFF
AUTO PAN
Description
Description
Quick display setting screen
DVR Name display
DVR Name hide
Zoom ON
Contact 1 OFF
Contact 2 ON
Contact 2 OFF
Auto pan start
D
M
C
P
DVR NAME DISPLAY
DVR NAME HIDE
ZOOM ON
Zoom OFF
Preset sequence start
Trace start
ZOOM OFF
AUTO FOCUS
AUX1 ON
PRESET SEQUENCE
AUTO TRACE
Auto focus
Contact 1 ON
Cannot be used
FUNCTION A
-Z
43
Download from Www.Somanuals.com. All Manuals Search And Download.
When the camera's protocol is TOA-B (Type B)...
Function Name
Function Name
AUTO PAN PIVOT
SET PAN LEFT
SET PAN RIGHT
PRESET SEQ NUM
PRESET SEQ RND
PRESET SEQ TEST
AUTO TRACE 1
Description
Description
Auto pan (pivot) start
Auto pan end point setting (left)
Auto pan end point setting (right)
Preset sequence (numerical order) start
Preset sequence (random) start
Preset sequence (test) start
Trace 1 start
Quick display setting screen
DVR Name display
DVR Name hide
Zoom ON
D
M
C
P
DVR NAME DISPLAY
DVR NAME HIDE
ZOOM ON
ZOOM OFF
AUTO FOCUS
AUX1 ON
Zoom OFF
Auto focus
Contact 1 ON
Trace 2 start
Contact 1 OFF
AUTO TRACE 2
AUX1 OFF
Trace 1 memory start
Trace 2 memory start
Trace memory end
Tours 1-16 start
Alarm action allowed
Contact 2 ON
Contact 2 OFF
Auto pan (preprogrammed) start
Auto pan (reverse) start
Auto pan (skip) start
Auto pan (random) start
MEMORY TRACE 1
MEMORY TRACE 2
FINISH MEM TRACE
AUX2 ON
AUX2 OFF
AUTO PAN DEF
AUTO PAN INV
AUTO PAN SKIP
AUTO PAN RANDOM
TOUR
ALARM ACT PERMIT
FUNCTION A
1
-
16
Cannot be used
-
Z
Default abbreviation number settings
Functions are assigned to abbreviation numbers by the factory as shown below. Each function can be
performed by entering the corresponding number using the ten-key numerical pad, and pressing the SET key.
Abbre-
viation
No.
Abbre-
viation
No.
Default Setting
Description
Default Setting
Description
For TOA-B (Type B)
For TOA-A (Type A)
F1
F2
Auto focus
AUTO FOCUS
AUTO PAN
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
Preset sequence (random) start
Preset sequence (test) start
Auto pan (preprogrammed)
Auto pan (reverse) start
Auto pan (skip) start
Auto pan (random) start
Auto pan (pivot) start
Auto pan end point setting (left)
Auto pan end point setting (right)
Trace 1 start
PRESET SEQ RND
PRESET SEQ TEST
AUTO PAN DEF
Auto pan start
Preset sequence start
Trace start
DVR Name display
DVR Name hide
Zoom ON
F3
F4
PRESET SEQUENCE
AUTO TRACE
DVR NAME DISPLAY
DVR NAME HIDE
ZOOM ON
ZOOM OFF
AUTO FOCUS
AUX1 ON
AUX1 OFF
AUX2 ON
AUX2 OFF
AUTO PAN
AUTO PAN INV
251
252
253
254
255
256
257
258
259
260
261
262
AUTO PAN SKIP
AUTO PAN RANDOM
AUTO PAN PIVOT
SET PAN LEFT
SET PAN RIGHT
AUTO TRACE 1
AUTO TRACE 2
MEMORY TRACE 1
MEMORY TRACE 2
FINISH MEM TRACE
Zoom OFF
Auto focus
Contact 1 ON
Contact 1 OFF
Contact 2 ON
Contact 2 OFF
Auto pan start
Preset sequence start
Trace start
Trace 2 start
Trace 1 memory start
Trace 2 memory start
Trace memory end
Tour 1 start
PRESET SEQUENCE
AUTO TRACE
TOUR
TOUR
TOUR
TOUR
TOUR
TOUR
TOUR
TOUR
TOUR
1
2
3
4
5
6
7
8
9
Tour 2 start
Tour 3 start
For TOA-B (Type B)
Tour 4 start
F1
F2
Auto focus
Preset sequence (numerical order) start
Tour 1 start
AUTO FOCUS
PRESET SEQ NUM
Tour 5 start
Tour 6 start
F3
F4
TOUR
TOUR
1
2
Tour 7 start
Tour 2 start
Tour 8 start
301
302
303
304
305
306
307
308
309
310
DVR Name display
DVR Name hide
Zoom ON
Zoom OFF
Auto focus
Contact 1 ON
Contact 1 OFF
Contact 2 ON
Contact 2 OFF
Preset sequence (numerical order) start
DVR NAME DISPLAY
DVR NAME HIDE
ZOOM ON
Tour 9 start
Tour 10 start
TOUR 10
Tour 11 start
ZOOM OFF
TOUR 11
TOUR 12
TOUR 13
TOUR 14
TOUR 15
TOUR 16
ALARM ACT PERMIT
AUTO FOCUS
AUX1 ON
Tour 12 start
Tour 13 start
AUX1 OFF
Tour 14 start
AUX2 ON
Tour 15 start
AUX2 OFF
Tour 16 start
PRESET SEQ NUM
Alarm action allowed
44
Download from Www.Somanuals.com. All Manuals Search And Download.
12.4.5. Camera Protocol
Selecting protocol of the Combination Camera connected to the Digital Video Recorder only displays the
abbreviation function that can be used for each protocol. The abbreviation function table is factory-preset to
those for the model of TOA-A.
Note
Multiple combination cameras using different communication methods cannot be connected to a single digital
video recorder. Match the communication methods of all connected cameras.
TOA-A
TOA-B
: Select this model when connecting TOA’s Combination Camera to the Digital Video
Recorder using Type A communications method. (The Digital Video Recorder’s Camera
Protocol: TOA-A)
: Select this model when connecting TOA’s Combination Camera to the Digital Video
Recorder using Type B communications method. (The Digital Video Recorder’s Camera
Protocol: TOA-B)
BOSCH
: Select this model when using BOSCH’s Combination Camera in conjunction with the Digital
Video Recorder.
PELCO-D
: Select this model when using PELCO’s Combination Camera in conjunction with the Digital
Video Recorder.
Some functions or operations are not available depending on the communications method. Determine the
communications method referring to the following table.
Iris key
Position 0 *1
AUTO key
2
TOA
-A
*
(Type A)
3
TOA
-B
*
(Type B)
1
2
Operation for returning the camera to home position. Enter 0, then press the POS key.
*
*
Begins and terminates operations set in the Combination Camera’ s “Auto Function”
settings with each depression of the key. (Refer to p. 22 ; Auto Function Operations.)
3
Begins auto pan operation when pressed, and terminates all auto operations when
pressed again during auto pan operation.
*
Note
As shown below, TOA’s Combination Cameras are divided into two groups: one using the Type A (TOA-A)
communications method and the other using the communications method of both Types A and B (selectable
by DIP switch). The communications method is factory-preset to Type A (TOA-A).
For the DIP switch position and settings, refer to the setup manual enclosed with the Combination Camera.
TOA-A (Type A)
: C-CC501, C-CC504, C-CC551, and C-CC554
TOA-A/B (Types A/B selectable) : C-CC514, C-CC564, C-CC714, and C-CC764
45
Download from Www.Somanuals.com. All Manuals Search And Download.
12.4.6. Password
The Remote Controller's operation level can be set using passwords. The table below shows the available and
unavailable functions of each operation level. Please set the appropriate operation level referring to this table.
High
Low
Full-Lock
Operation Level 1 Operation Level 2 Operation Level 3
Menu Setting
Archive
Recording/Playback
Priority Recording
Triplex
Camera Operation
Live Screen Operation
Alarm Reset
(*1)
(*2)
Buzzer Reset
Operation Level 1 All functions available, including setting changes and archiving. Entering the corresponding password
gives access to Operation Level 1 from any other operation level.
Operation Level 2 Live and recorded images can be monitored, however setting changes and archiving cannot be
operated. Entering a password for operation level 2 allows login to operation level 2.
Operation Level 3 Only recorded images can be monitored. The Priority Recording key can be used if settings are
performed(*1). Entering a password for operation level 3 allows login to operation level 3.
No operation possible. If Operation Level 3 is valid (Password #3 has been set), the system
automatically switches to “Full-Lock” mode when the user logs out of Operation Level 3 or when the
log-out interval elapses.
Full-Lock
Log-Out Time
Can be set to 1, 5, 10, 30 or 60 minutes or OFF.
If no operations areꢀperformed for a pre-set period of time after log-in, the systemꢀautomatically logs
out, moving to the lowest set operation level.
[Example] When Operation Levels 1 and 2 are valid (Passwords 1 and 2 have been set),
the operation level after log-out is Level 3.
Priority recording Selecting ON permits the Priority Recording key to be used even when Operation Level 3 is valid.
operator Level 3
If OFF is selected, the Priority Recording key cannot be used when Operation Level 3 is valid.
Regardless of this ON/OFF setting, the Priority Recording key can always be used at Operation
Levels 1 and 2, and cannot be used when in Full-Lock mode.
(Factory-preset to OFF.)
(*1) Whether or not to make the Priority Recording key usable at Operation Level 3 can be set in the “Priority Recording
Operation Level 3” settings.
(*2) The Camera menu cannot be displayed.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
[ Passwords and operation levels ]
If no passwords have been set, Operation Level is “1.”
Refer to the table below if a password has been set.
Password 1
Password 2
Password 3
Operation Level 1 Operation Level 2 Operation Level 3
Full-Lock
Set Password
1
2
3
4
5
6
7
Password 1
Password 2
Password 3
Password 1 and 2
Password 2 and 3
Password 1 and 3
Password 1, 2, and 3
: Level after log-out.
: No operation level exists since no password has been set.
Enter the password corresponding to the desired operation level.
Operation levels after log-out are shown enclosed in a bold rectangle.
• Pattern 3
• Pattern 1
Password 3
entered
Password 1
entered
Operation
Level 1
Operation
Level 1
Operation
Level 2
Full-lock
• Pattern 4
• Pattern 6
Password 2
entered
Password 3
entered
Operation
Level 2
Operation
Level 2
Operation
Level 3
Full-lock
Password 1
entered
Password 1
entered
Operation
Operation
Level 1
Level 1
• Pattern 7
Password 1
entered
Password 3
entered
Operation
Level 3
Full-lock
Password 2
entered
Operation
Level 2
Password 1
entered
Operation
Level 1
47
Download from Www.Somanuals.com. All Manuals Search And Download.
[ Password Settings ]
1. Select [PASSWORD] while the menu is displayed and press the
SET key.
2. Select the operation level and press the SET key.
3. Select [ON] and press the SET key.
P A S S W O R D
1 . L E V E L 1
4. Enter a password (6-digit number).
O N
5. To continue to set Operation Levels 2 and 3, repeat Steps 2-4.
P A S S W O R D
1 . L E V E L 1
12.4.7. Focus speed
Lens speed when the FOCUS key is pressed can be adjusted in 4 steps.
1. Select [FOCUS SPEED] while the menu is displayed and press
the SET key.
F O C U S S P E E D
> > > >
2. Tilt the joystick to the left or right to select the desired speed and
press the SET key.
(Factory-preset to [>>>>], maximum.)
12.4.8. Buzzer tone
The buzzer tone can be set to ON or OFF.
1. Select [BUZZER] while the menu is displayed and press the SET
key.
B U Z Z E R
The setting content is displayed on the second line.
2. Select the setting content and press the SET key.
[Setting contents]
The buzzer tone is sounded when alarm is triggered, when priority recording is
performed, or when the Digital Video Recorder fails.
1. ON
The buzzer tone is not sounded when alarm is triggered, when priority recording is
performed, or when the Digital Video Recorder fails.
2. OFF
(Factory-preset to ON.)
48
Download from Www.Somanuals.com. All Manuals Search And Download.
12.4.9. Key operation tone
The tone generated whenever the key is pressed can be set to
sound or not to sound.
K E Y C L I C K O N / O F F
1. Select [KEY CLICK ON/OFF] while the menu is displayed and
press the SET key.
The setting content is displayed on the second line.
2. Select the setting content and press the SET key.
[Setting Contents]
1. ON
The key operation tone is sounded when the key is pressed.
The key operation tone is not sounded when the key is pressed.
2. OFF
(Factory-preset to ON.)
12.4.10. I/O Speed
Set the DVR control output terminal's transmission rate. (Factory-preset to [38400].)
1. Select [I/O SPEED] while the menu is displayed and press the
SET key.
I
/ O S P E E D
3 8 4 0 0
2. Tilt the joystick to the left or right to select the transmission rate:
[9600], [19200] or [38400].
Note
Set the same transmission rate for the components connected to
the control terminal. The Digital Video Recorder (C-DR091 and C-
DR161 Series) and the C-RF1000 Interface Unit are factory
preset to 38400 bps.
I
/ O S P E E D
3. Press the SET key to confirm the selected transmission rate.
12.4.11. DVR check
Check the Digital Video Recorder connected to the control terminal.
Select [DVR CHECK] while the menu is displayed and press the
SET key.
The connected Digital Video Recorder number is displayed.
D V R C H E C K
Note
Performing the DVR check during cascade connection displays all
connected Digital Video Recorder numbers. If the number of the
connected Digital Video Recorder is not displayed, communications
may not have been established. In such cases, check to see if:
• The connection terminal is correctly connected.
• The Remote Controller’s transmission rate matches that of the Digital Video Recorder.
• The Digital Video Recorder’s DVR-ID number is correctly set.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
12.4.12. Monitor lock
Set the Monitor Lock function for the system in which multiple remote controllers are connected. This restricts
operable monitors and eliminates the necessity for switching monitors, allowing malfunctions to be avoided.
Using the Monitor lock function in combination with the abbreviation number function makes the abbreviation
number settings simple. (Refer to p.41; Abbreviation. )
Set Monitor Lock, as shown in the system example below.
1. Select [MONITOR LOCK] while the menu is displayed and press
the SET key.
M O N I T O R L O C K
D V R N O .
A DVR number option is displayed on the second line.
2. Select the [DVR NO.] and press the SET key.
M O N I T O R L O C K
M O N N O .
A monitor number (MON No.) option is displayed on the second
line.
3. Select the [MON NO.] and press the SET key.
4. Select the setting content and press the SET key.
[Setting Contents]
M O N I T O R L O C K
1 . L
1. LOCK
Images are displayed, however set monitors cannot be operated or selected.
Set monitors can be operated and selected.
2. UNLOCK
(Factory-preset to 2. UNLOCK.)
[ System Example ]
Monitor 2
R M 4
R M 3
D V R 3
D V R 2
DVR : Digital Video Recorder
RM : Remote Controller
RF : Interface Unit
3 F
: Monitor Output 1
: Monitor Output 2
: Remote Controller control line
Monitor 2
Monitor 2
2 F
1 F
Caretaker's room
Master
monitor
D V R 1
R F
R M 2
R M 1
[ Setting example ]
Remote
1
2
2
2
R M 1
R M 2
LOCK
Monitor 1
R M 3
R M 4
*
*
*
*
controller
Digital
Video
LOCK
LOCK
LOCK
UNLOCK
Monitor 1
UNLOCK
Monitor 2 Monitor 1, 2
Monitor 1
UNLOCK
UNLOCK
Recorder
D V R 1
D V R 2
D V R 3
Monitor 2
Monitor 2
Monitor 2
Monitor 1, 2
Monitor 1 Monitor 1, 2
Monitor 1 Monitor 1, 2
Monitor 2 Monitor 1, 2
Monitor 1
Monitor 1, 2
Monitor 2
1
2
To operate the master monitor, do not set the Monitor Lock to "LOCK” for any cascade-connected
Digital Video Recorders’ (DVR1 3) Monitor 1.
*
*
-
Set the Monitor lock to "UNLOCK” for only the monitors to be operated and "LOCK” for other
monitors not to be operated.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
12.4.13. Language
Set the language to be displayed on the LCD screen.
1. Select [LANGUAGE] while the menu is displayed and press the
SET key.
L A N G U A G E
The setting content is displayed on the second line.
1 . E
2. Select the setting content and press the SET key.
[Setting Contents]
1. ENGLISH
2. FRENCH
The English language is displayed on the LCD screen.
The French language is displayed on the LCD screen.
(Factory-preset to 1. ENGLISH.)
12.4.14. Initial status
Returns settings to default conditions.
Note: Abbreviation number contents are not erased even if the settings are returned to their initial status.
1. Select [SET TO DEFAULT] while the menu is displayed, and
press the SET key.
S E T T O D E F A U L T
2. Press the SET key to confirm the selection.
To cancel the selection, press the C key.
12.4.15. Joystick position adjustment
Adjust the joystick’s central position.
1. Select [JOYSTICK CAL] while the menu is displayed.
J O Y S T I C K C A L
2. Press the SET key to confirm the selection.
The current joystick position is assumed to be a center. To
cancel, press the C key.
Note: Do not press the SET key with the joystick tilted.
12.4.16. Expansion
Cannot be used.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
13. CONNECTIONS
13.1. Equipment Connections
• Use the CPEV-S cable (twisted pair shielded cable) with diameter larger than 0.65 mm (AWG22) for
connection between control terminals. Be sure to connect the shielded cable to the GND terminal.
• The control cable length between the Remote Controller and the farthest Digital Video Recorder must be
shorter than 1.2 km (3,937 ft).
• All connected components must be identical in transmission rate.
• When using the supplied modular cable (3 m (9.8 ft)) for connection to the Digital Video Recorder, the
supplied AC adapter is not required since the power is supplied from the Digital Video Recorder. When
using the Remote Controller’s screwless terminal, connect the supplied AC adapter to supply the power.
13.1.1. Combination camera
• Up to 16 Combination Cameras can be operated per Digital Video Recorder (up to 9 cameras per 9-channel
Digital Video Recorder). Avoid connecting more cameras than the number of Digital Video Recorder
channels to the Digital Video Recorder’s camera control terminal.
• The Digital Video Recorder must be used to control the Combination Camera. It is impossible to control the
camera by connecting the Remote Controller directly to the camera.
• There are two communications methods of the Combination Camera: Type A and Type B.(Refer to p. 45;
Camera Protocol.) Multiple combination cameras using different communication methods cannot be
connected to a single digital video recorder. Match the communication methods of all connected cameras.
• Match the transmission rate among the combination camera, digital video recorder, and remote controller.
(Refer to p. 49; I/O Speed.)
• Match the Combination Camera’s address to the Digital Video Recorder’s video input number. The camera
number entered at the Remote Controller is the Combination Camera’s address number.
13.1.2. Digital video recorder
• Up to 8 Digital Video Recorders can be cascade-connected and controlled by the Remote Controller.
• When cascade-connecting the Digital Video Recorder, set the termination switch of the last connected
Digital Connector to ON.
• Be sure to select “ON” in the digital video recorder’s controller response setting.
• The Digital Video Recorder’s “DVR-ID” settings must be performed when cascade-connecting the recorder.
For more information, please read the Digital Video Recorder’s instruction manual.
Note
Two setting methods are available: one from the Digital Video Recorder's menu and the other using the
Digital Video Recorder's front-mounted keys. For more information, refer to the operation manual enclosed
with the Digital Video Recorder.
• Do not connect 2 Remote Controllers simultaneously to each Remote Controller Input Terminals A and B, as
they could not be operated correctly. Use the Interface Unit when connecting multiple Remote controllers to
the Digital Video Recorder.
13.1.3. Interface unit
• Up to 4 Remote Controllers can be expanded with the use of the Interface Unit. (Up to 3 controllers when
the RS-232C terminal is in use.) Set the Monitor Lock when connecting multiple Remote Controllers to the
interface unit. (Refer to p.50; Monitor Lock.)
• When multiple connected remote controllers are operated simultaneously, the most recently operated
remote controller takes precedence.
• The transmission rate between the Interface Unit and the Digital Video Recorder is fixed to 38,400 bps.
When using the Interface Unit, set the Digital Video Recorder’s remote control transmission rate to 38,400
bps.
• Make sure to match the transmission rate of all components connected to the Interface Unit. Also, match the
Interface Unit’s DIP switching settings to the Remote Controller’s transmission rate settings.
• When the Interface Unit is used, the power to the Remote Controller is supplied from the supplied AC
adapter.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
13.2. System Example
13.2.1. Basic system
DVR CONTROL
OUTPUT-A
Color camera
Remote Controller
C-RM1000
Digital Video Recorder
C-DR091 or
RM IN-A
Termination: ON
C-DR161 Series
1
ARCHIVE
1
9
2
3
4
5
6
7
8
REC
FAILURE
HD FULL
KEY LOCK
10
11
12
13
14
15
16
Combination
Camera
DIGITAL VIDEO RECORDER C-DR161
16
Monitor 1
10BASE-T
100BASE-TX
DISK
1
*
ARRAY
RS-485
Live display
only
LAN
Monitor 2
1
*
RS-485
To AC Mains
PC
HDD expansion unit
C-DA1000 Series
1
: Coaxial cable (video signal)
: CPEV-S 0.65-2C (RS-485 control line)
Match the Combination Camera’ s address to the Digital Video
Recorder’ s video input number.
*
: Modular cable, 3 m (9.8 ft).
(supplied with the C-RM1000)
: Modular cable, 1 m (3.3 ft)
(supplied with HDD expansion unit)
: S-ATA cable, 1 m (3.3 ft)
(supplied with HDD expansion unit)
53
Download from Www.Somanuals.com. All Manuals Search And Download.
13.2.2. Expanded Digital video recorder system (Cascade-connection)
REMOTE
CONTROLLER
Interface Unit C-RF1000
INPUT-B
REMOTE CONTROLLER
1
2
3
4
POWER/DVR
INTERFACE UNIT C-RF1000
DVR CONTROL
OUTPUT-A
Supplied modular cable (3 m (9.8 ft))
RM IN-A
Group 1
Digital Video Recorder 1
C-DR091 or
REMOTE
CONTROLLER
OUTPUT-B
Remote
Termination: OFF
Monitor
Controller 1
C-RM1000
Combination Camera
C-DR161 Series
output 1
Group 1
Master
monitor
ARCHIVE
1
9
2
3
4
5
6
7
8
REC
AILURE
D FULL
KEY LOCK
10
11
12
13
14
15
16
1
*
DIGITAL VIDEO RECORDER C-DR161
RS-485
LINK
RM
Monitor
output 2
1
-16
OUT-B
To AC Main
DVR 1
Live display
only
AC adapter
To LAN
RS-485
Monitor
output 1
Remote
RM IN-B
Controller 2
Termination: OFF
Digital Video Recorder 2
DVR 2
Live display
only
ARCHIVE
1
2
3
4
5
6
7
8
REC
KEY LOCK
9
10
11
12
13
14
15
16
1
FAILURE
HD FULL
*
DIGITAL VIDEO RECORDER C-DR161
Monitor
RS-485
output 2
RM
1
-16
OUT-B
To LAN
RS-485
Group 2
RM IN-B
Remote
Monitor
output 1
Termination: OFF
Controller 3
Digital Video Recorder 3
Group 2
Master
monitor
ARCHIVE
1
2
3
4
5
6
7
8
1
*
REC
KEY LOCK
9
10
11
12
13
14
15
16
FAILURE
HD FULL
DIGITAL VIDEO RECORDER C-DR161
RS-485
LINK
RM
OUT-B
1
-16
Monitor
output 2
DVR 3
Live display
only
To LAN
Monitor
output 1
RM IN-B
Remote
Termination: ON
Digital Video Recorder 8
Controller 4
DVR 8
Live display
only
ARCHIVE
1
2
3
4
5
6
7
8
1
REC
FAILURE
D FULL
KEY LOCK
9
10
11
12
13
14
15
16
*
DIGITAL VIDEO RECORDER C-DR161
Monitor
output 2
RS-485
1
-16
To LAN
PC
: Coaxial cable (video signal)
: CPEV-S 0.65-2C (RS-485 control line)
: Modular cable, 3 m (9.8 ft).
(supplied with the C-RM1000)
LAN
*1 Match the Combination Camera’s address to the Digital Video Recorder’ s video input number.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
13.2.3. Connections between the Remote controller and the Digital video recorder
[C-RF1000 Interface Unit Connections]
The maximum cable length is 1.2 km (3,937 ft) for each distance between the Remote Controller and the
Interface Unit and between the Interface Unit and the farthest Digital Video Recorder.
The maximum cable length is 1.2 km (3,937 ft) for each distance between
the Remote Controller and the Interface Unit.
Interface unit
C-RF1000
Screwless terminal
Remote controller 1
Screwless terminal
Remote controller 2
Screwless terminal
Remote controller 3
*1
Screwless terminal
Remote controller 4
*2
PC
Notes
*1. Match the transmission rate of all components connected to the Interface Unit. The Interface Unit's DIP
switch settings must also be identical with the Remote Controller's bit rate settings.
*2. Remote Controller Input Terminal 4 cannot be used simultaneously with the RS-232C port. Connect
either.
[Remote Controller connections using the dedicated cable]
The maximum cable length is 1.2 km (3,937 ft) for distance between the Remote Controller
and the Digital Video Recorder of which termination switch is set to ON.
No AC adapter required
Termination switch: OFF
Termination switch: OFF
Termination switch: ON
Remote
Digital Video
Recorder
Digital Video
Recorder
Digital Video
Recorder
Controller
RJ-11
RJ-11
Screwless
terminal
Screwless
terminal
Screwless
terminal
Screwless
terminal
terminal
terminal
Power supply
Supplied modular cable (3 m (9.8 ft))
CPEV-S larger than AWG22 (Ø0.65 mm)
Note: Do not connect the AC adapter.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
[Cable length extension between the Remote Controller and Digital Video Recorder]
Power to the Remote Controller is supplied from the AC adapter.
The maximum cable length is 1.2 km (3,937 ft) for distance between the Remote Controller
and the Digital Video Recorder of which termination switch is set to ON.
Termination switch: OFF
Termination switch: OFF
Termination switch: ON
Digital Video
Recorder
Digital Video
Recorder
Remote
Digital Video
Recorder
Controller
Screwless
terminal
Screwless
terminal
Screwless
terminal
Screwless
terminal
Screwless
terminal
Screwless
terminal
AC adapter
required
CPEV-S larger than AWG22 (Ø0.65 mm)
Note: Do not connect the supplied modular cable.
14. DIGITAL VIDEO RECORDER FAILURE INDICATION
The Digital Video Recorder's failures can be confirmed at the Remote Controller.
14.1. Remote Controller Indication and Status
: Flashes red
ALARM RESET
LCD Screen
Buzzer *
Digital VideoRecorder Failure Status
Key
A hard disk error, video loss or fan failure has occurred at the Digital Video
Recorder number displayed on the LCD screen. Check the Digital Video
Recorder’s failure log to take appropriate steps. For details, please read the
Digital Video Recorder’s instruction manual.
F A
I
L U R E
1
D V R
The hard disk of the Digital Video Recorder number displayed on the LCD
screen is full. Check the Digital Video Recorder’s failure log to take
appropriate steps. For details, please read the Digital Video Recorder’s
instruction manual.
H D F U L L
D V R
1
* Available when the Remote Controller’s buzzer settings are set to ON.
Note
When the Digital Video Recorder recovers from the failure, the Alarm Reset key lights to indicate the
occurrence of an error. Hold down the key for 2 seconds or more to extinguish it.
14.1.1. Stopping the buzzer tone
BURZZEESRESTTOP
Press the Alarm Reset key to stop the buzzer tone.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
15. TROUBLESHOOTING
Possible Cause
Symptom
Remedy
• Connect correctly.
[If the supplied modular cable is used]
• The Remote Controller is not
correctly connected to the Digital
Video Recorder using the supplied
modular cable.
Power not supplied to
the Remote Controller.
• The Digital Video Recorder’s power
source is not connected to the wall
AC outlet.
• Connect to the AC outlet. (The Digital
Video Recorder supplies power to the
Remote Controller even when in standby
mode.)
[If the AC adapter is used]
• AC adapter not correctly connected.
• Connect correctly.
Cannot operate the
Digital Video Recorder
from the Remote Cont-
roller.
• The Digital Video Recorder’s power
not switched on.
• Switch on the power.
• The Digital Video Recorder to be
operated not selected.
• Connect equipment correctly. (Refer to p.
13; Equipment Selection.)
• Password for the Remote Controller
not set.
• Enter the password and log in to the
desired operation level. (Refer to p. 33;
Log-In and Log-Out.)
• Password for the Digital Video
Recorder not set.
• Enter the password and log in to the
desired operation level. (Refer to p. 32;
Entering the Digital Video Recorder
Password.)
• The Digital Video Recorder’s USB
key detached.
• Insert the USB key.
• Access to the Digital Video Recorder
to be operated not allowed.
• Set “Control” in the group settings to ON.
(Refer to p. 40; Group Settings.)
• Monitor lock function enabled.
• Set the Monitor lock settings to [UNLOCK].
(Refer to p. 50; Monitor Lock.)
• Communications not performed
between the Remote Controller and
Digital Video Recorder.
• Perform DVR check to confirm that the
Digital Video Recorder to be operated is
recognized. (Refer to p. 49; DVR Check.)
Cannot operate the
Combination Camera
from the Remote Con-
troller.
• The Combination Camera to be
operated not selected.
• Select equipment correctly. (Refer to p.
13; Equipment Selection.)
• Camera address not matched.
• Match the camera address and the Digital
Video Recorder’s video input number.
(Refer to p. 52; Equipment Connections.)
• Match the transmission rate. (Refer to p.
45; Camera Protocol.)
• Transmission rate not matched.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
16. OPERATION GUIDE
Reference
Page
Operation Method
(Key Operation)
Display Status
Remark
Operation Item
• Equipment selection
Digital Video recorder
Numerical keypad (DVR No.) + DVR DVR No. displayed on the LCD and
DVR lights.
P. 13
P. 14
selection
Monitor alternates between
Monitor selection
MON
Monitor No. displayed on the LCD.
1 and 2 as the key is pressed.
Numerical keypad (camera No.)
+ CAM
Camera No. displayed on the LCD and
CAM lights.
Camera selection
Group selection
P. 14
P. 13
Shift + Numerical keypad
(group No.) + DVR
Group No. (G_) displayed on the LCD.
Only when setting groups
• Monitor display
Numerical keypad (camera No.)
+ FULL
FULL light.
Full-screen display
P. 15
P. 16
Multi-segment split screen
switches as the key is
pressed.
Multi-screen display
MULTI
MULTI lights.
+
4-segment split screen display SHIFT FULL
MULTI lights.
P. 16
Split screen segment switc-
hes with repetition of the
same operation.
+
9-segment split screen display SHIFT MULTI
MULTI lights.
MULTI lights.
P. 17
P. 17
P. 18
+
16-segment split screen display SHIFT SEQUENCE
Display position change
Live mode + Multi-screen display
+ continuous depression of MULTI
SEQUENCE
Performs sequential display
as set at the Digital Video
Recorder.
Sequential display
SEQUENCE lights.
P. 18
• Combination Camera operation (available only while the live screen is displayed)
Numerical keypad (camera No.)
Full-screen camera operation
FULL light.
P. 15
P. 16
+ FULL
Multi-screen camera operation Multi-screen display + Numerical MULTI light.
keypad (camera No.) + CAM
Camera rotation
Camera selection + Up, Down,
Left or Right
P. 21
Combination Camera only
Camera telephoto (wide angle)
operation
Camera selection + TELE (WIDE)
P. 21
Focus adjustment
Camera selection + FOCUS (+) or (–)
Camera selection + IRIS (+) or (–)
P. 21
P. 22
Iris adjustment
Combination Camera
type B only
Auto operation terminated
by continuously pressing
the AUTO key.
Auto-pan operation
Camera selection + AUTO
Auto lights.
P. 22
P. 24
Camera selection + numerical
keypad (position No.) + SHIFT
+ POS (continuous depression)
Preset position storing
PRESET MEMORY indication displayed
on the LCD.
Camera selection + numerical key-
pad (position No.) + SHIFT + C
(continuous depression)
Preset position erasure
PRESET CLEAR indication displayed
on the LCD.
P. 24
Combination Camera only
Preset position selection
Camera menu display
Camera selection + numerical
keypad (position No.) + POS
Position number displayed on the LCD.
Camera menu displayed on Monitor 1.
P. 22
P. 23
Camera menu closed by
continuously pressing the
CAM MENU key again.
Continuous depression of the
CAM MENU key
• Digital Video Recorder operation
Priority recording stopped by
continuously pressing the
PRIORITY REC key again.
Priority recording
PRIORITY REC
PRIORITY REC flashes.
P. 25
Stopping a buzzer tone
Playback
P. 35
P. 26
P. 27
P. 26
ALARM RESET
PLAY/LIVE
Monitor 1 PLAY
Switches to playback mode.
Switches to live mode.
PLAY/LIVE extinguishes.
Monitor 1 REV
Stopping playback
Reverse playback
PLAY/LIVE
Playback + LEFT
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation Method
(Key Operation)
Reference
Page
Display Status
Remark
Operation Item
• Digital Video Recorder operation
Monitor 1
Monitor 1
Monitor 1
PLAYX2 (X4, X8)
REVX2 (X4, X8)
PLAYX1M (X10M)
Forward quick playback
Reverse quick playback
Playback + RIGHT
P. 27
P. 27
P. 27
Speed changes as the
joystick is tilted. (Can be
fixed with the SET key.)
Playback + LEFT
TELE
1-minute/10-minute skip
forward playback
Skip time changes depend-
ing on the joystick rotation
angle. (Can be fixed with
the SET key.)
1-minute/10-minute skip
reverse playback
Monitor 1
Monitor 1
REVX1M (X10M)
PAUSE
WIDE
P. 27
Pause
Playback + DOWN
Pause mode + UP
Pause mode + RIGHT
Pause mode + LEFT
P. 27
P. 27
P. 28
P. 28
P. 28
P. 28
P. 28
Pause reset
Frame advance playback
Frame reverse playback
Instant event access (forward) Pause mode + FOCUS (+)
Instant event access (reverse) Pause mode + FOCUS (–)
Earliest image playback
IRIS (+)
Cannot be used during
recording in overwrite mode.
Lastest image reverse
playback
P. 28
P. 29
IRIS (–)
Search
SEARCH
Search menu displayed on Monitor 1.
Select search method and
confirm the method using
TELE.
Digital Video Recorder menu
display
Continuous depression of
DVR MENU
Digital Video Recorder menu displayed
on Monitor 1.
P. 29
Pause mode + continuous
depression of MENU
Archive menu displayed on Monitor 1.
Archive menu display
Triplex settings
P. 30
P. 31
Playback mode + multi-screen
display + continuous depression
of MULTI
Login screen display + Numerical
The [****** ] mark is displayed for
Digital Recorder's password
entry
P. 32
keypad + FULL (Repeat) + SET entered numeral.
• Other operations
Log-in
Continuous depression of MENU
Select LOGIN and enter password.
P. 33
P. 33
Log-out
Continuous depression of MENU
Select LOGOUT.
Numerical keypad (abbreviation
Abbreviation
Alarm reset
P. 34
P. 35
number) + SET
Alarm mode + continuous
depression of RESET
Alarm hold
HOLD
P. 35
P. 35
Alarm Hold reset
Continuous depression of HOLD
• Settings and basic operations
Can be displayed only for
Operation Level 1 when a
password has been set.
Menu display
Continuous depression of MENU
P. 39
Selection item movement
Setting confirmation
P. 39
P. 39
Menu display + UP, DOWN,
LEFT or RIGHT
Only the SET key can be
used while the camera menu
is displayed.
Menu display + TELE or SET
Only the C key can be used
while the camera menu is
displayed.
Setting cancellation
Exiting the menu
Menu display + WIDE or C
P. 39
P. 39
Continuous depression of MENU
Note: Continuous depression: Hold down the key for 2 seconds or more.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
17. SPECIFICATIONS
Power Source
12 V AC, 60 Hz (use of the supplied AC adapter)
or 12 V DC (supplied from the digital video recorder)
Current Consumption
80 mA (use of the supplied AC adapter)
Digital Video Recorder
Control
RS-485, RJ11 (6P 6C)
(when the included 3-meters (9.8 ft) modular cable is used)
RS-485, screwless connector (3 pins)
(with cable length of 3-meters (9.8 ft) and more, or when C-RF1000 (option) is used)
Alarm Signal
Continuous alarm tone (can be turned on and off through the menu)
Maximum Cable Distance 1.2 km (3,937 ft) *
Function
Password setting, DVR Group setting, Abbreviation function (512 types),
Preset position setting, Language choice (English/French)
0°C to +40°C (32°F to 104°F)
Operating Temperature
Operating Humidity
Finish
Under 80%RH (no condensation)
Panel: Surface-treated steel plate, silver, paint
Sides: Rubber
Dimensions
Weight
323.6 (W) x 112.7 (H) x 181 (D) mm (12.7 (W) x 4.4 (H) x 7.1 (D) inch)
1.6 kg (3.5 lb) (excluding AC adapter)
* Applies to the system where the unit and digital video recorder are connected in a matched pair. Represents
the total of connected cable distances if multiple digital video recorders or Interface units are connected in
the system.
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
AC adapter (1.8 m (5.9 ft)) ...................... 1
Modular cable (3 m (9.8 ft)) ..................... 1
• Optional products
Digital video recorder: C-DR091/C-DR161 Series
Interface unit:
C-RF1000
133-12-992-40
Download from Www.Somanuals.com. All Manuals Search And Download.
|