OPERATING INSTRUCTIONS
UHF WIRELESS MICROPHONE
WM-4310
WM-4310A
WM-4310H
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS ............................................................................... 2
2. GENERAL DESCRIPTION ............................................................................ 3
3. FEATURES ......................................................................................................... 3
4. HANDLING PRECAUTIONS ......................................................................... 3
5. NOMENCLATURE ............................................................................................ 4
6. BATTERY INSERTION .................................................................................... 5
7. OPERATION ....................................................................................................... 5
8. OPERATIONAL HINTS ................................................................................... 6
9. DISTANCE BETWEEN THE MICROPHONE AND THE MOUTH ...... 6
10. CHANNEL NUMBER SETTING ................................................................... 6
11. AUDIO LEVEL ADJUSTMENT (SENSITIVITY CONTROL) ................ 6
12. LICENSE REQUIREMENT ............................................................................ 7
13. SPECIFICATIONS ............................................................................................ 7
Accessories ............................................................................................................. 7
Download from Www.Somanuals.com. All Manuals Search And Download.
2. GENERAL DESCRIPTION
The wireless microphone WM-4310 is of lavalier type, while the WM-4310A and WM-4310H are of headset
type, and all are designed for use on UHF band.
The WM-4310/-4310A/-4310H accommodate the supplied microphone unit or headset with a cardioid pick-up
pattern and are suitable for speech reinforcement applications. The built-in circuitry is so designed to minimize
the influence from ambient noise.
The WM-4310A differs from the WM-4310H in that the WM-4310A features sweat-proof design and is
supplied with a waist pouch.
3. FEATURES
• One frequency can be selected from 16 operating frequencies of 16 frequencies of 690 – 865 MHz.
• An optimized PLL-synthesizer minimizes the oscillation frequency drift resulting from the ambient
temperature or voltage fluctuation.
• Audio level control adjusts the microphone sensitivity.
• Battery lamp indicates battery consumption to prevent the unit from malfunctioning when the battery level
remarkably decreases.
• Compact size and high reliability
• Sweat-proof handset with an adjustable fixing band is exclusively designed for use by aerobics instructors.
(WM-4310A only)
4. HANDLING PRECAUTIONS
• Do not expose the unit to rain or an environment where it may be splashed by water or other liquids, as
doing so may result in unit failure.
• Never open nor remove the unit case to modify the unit. Refer all servicing to your nearest TOA dealer.
• Take care not to drop the unit onto the floor nor bump it against a hard object as the unit could fail.
• Do not place the unit in locations of high temperature (ex. in a car parked in summer) or high humidity as the
unit could fail.
• Do not use the unit in locations where it is exposed to seawater.
• To clean, use a dry cloth. When the unit gets very dirty, wipe lightly with a cloth damped in a dilute neutral
cleanser, then wipe with a dry cloth. Never use benzine, thinner, or chemically-treated cleaning towel.
• Avoid using a mobile telephone near the wireless microphone in use. Noise could be picked up.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
5. NOMENCLATURE
[ Main unit ]
[ Microphone unit ] (WM-4310 only)
Power/Battery lamp
(Orange LED)
Tie-clip attachment
32
23.5
Power ON/OFF
switch (push lock)
This part
rotates 360°.
Crip
Plug lock
62
Clip
(Rotates 360°.)
ø3.5
Audio level control
Channel select switch
[ Waist pouch ] (WM-4310A only)
[ Headset ] (WM-4310A only)
Adjustable band
Gooseneck
Windscreen
Plug lock
ø3.5
Microphone
[ Headset ] (WM-4310H only)
Gooseneck
Plug lock
Windscreen
ø3.5
Unit: mm
Microphone
4
Download from Www.Somanuals.com. All Manuals Search And Download.
6. BATTERY INSERTION
Step 1. Holding the microphone body, slide
the battery cover down to open it. The
battery cover is designed not to be
removed from the body.
1
Step 2. Insert the battery 6LR61 (Alkaline 9 V) according to the instructions attached
to the inside of the battery compartment. Pay attention to the correct polarity
when inserting the battery.
2
Step 3. Replace the battery cover.
Battery replacement
• A brand-new battery will provide the power enough to operate the unit
continuously for 10 hours.
• As long as the battery has sufficient power for the microphone to function
properly, the orange LED will light. When the orange LED starts to fade and
then flash, replace it with a new one.
Power/Battery lamp
(Orange LED)
7. OPERATION
Step 1. Plug the microphone's plug into the input connector as illustrated.
Step 2. Make sure that the receiver and the wireless microphone are of the same channel (frequency).
Step 3. If they are not identical in channel, you have to adjust the channel switch.
Step 4. Press the microphone ON/OFF switch to turn on the microphone.
The orange LED indicates the circuit is active.
As for the WM-4310A, insert the main unit into the waist pouch as indicated by the arrow. The main
unit's power switch should be located under the switch indication position (SW mark) of the pouch.
When turning on the microphone, press SW mark on the pouch.
Step 5. Make sure to press the ON/OFF switch again to turn off the microphone after using.
Power switch position mark
4
Plug lock
1
Secure the connection
with the plug lock.
Illustration for WM-4310A
5
Download from Www.Somanuals.com. All Manuals Search And Download.
8. OPERATIONAL HINTS
• The microphone's service distance is 3 – 120 m. When the microphone user moves in a facility, signal
dropouts (momentary losses of signal reception) may be encountered. These dropouts are caused by the
building's architectural designs or materials which block the travel of or reflect the radio signal. If this occurs,
the user needs to change locations for better signal reception.
• The proper operation of your wireless system may be interfered with by other system operating on the same
frequency. In such cases, change the operating frequency of your system. (As to dealing with the
interference, refer to the operating instructions of the wireless tuner.)
• Should you have any questions regarding the use or availability of TOA wireless products, please contact
your local TOA dealer.
9. DISTANCE BETWEEN THE MICROPHONE AND THE MOUTH
[Lavalier type version (WA-4310)]
Keep your mouth 15-20 cm away from the microphone for the best possible sound reproduction. Take care
not to bring your mouth too close to the microphone (within 5 cm) as this impairs speech clarity if you speak
loudly.
[Headset type version (WA-4310A, WA-4310H)]
By adjusting the gooseneck, locate the microphone with the supplied windscreen in front of your mouth, and
position it 3-5 cm away from your mouth for the best sound reproduction. When the microphone is too close to
your mouth or you speak too loud, speech clarity will be impaired, making it hard for the audience to hear
announcements.
10. CHANNEL NUMBER SETTING
Step 1. Slide the battery cover down to open it.
2
Step 2. Using the supplied screwdriver, set the Channel setting
switch pointer to the desired channel number.
Step 3. Replace the battery cover.
Note: Make sure that the wireless microphone is identical to the wireless tuner in the channel number.
Should the microphone's setting differ from that of the tuner, the tuner does not receive the
microphone signal.
11. AUDIO LEVEL ADJUSTMENT (SENSITIVITY CONTROL)
To change the factory-preset level, follow the procedures below.
Step 1. Holding the microphone body, slide the battery cover down
to open it. The battery cover is designed not to be removed
from the body.
Audio level control
3
Step 2. Switch on the power of the tuner and microphone.
Step 3. Adjust the audio level control using the supplied screwdriver.
The microphone sensitivity increases as the control is rotated
clockwise, and decrease as rotated counterclockwise.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4. Adjust the corresponding tuner's volume control so that its knob points to the 2 o'clock position. If the
tuner's AF PEAK indicator remains lit, readjust the microphone's audio level control to the position
that causes the indicator to flash when the tuner output level reaches its peak. The AF PEAK indicator
lights when the output level reaches the point of about 3 dB below the clipping level.
Note
The AF PEAK indicator operates in response to the volume control position.
However, the AF LEVEL indicator (on the WT-4810) indicates the level regardless of the volume
control setting.
Step 5. Replace the battery cover.
12. LICENSE REQUIREMENT
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
13. SPECIFICATIONS
[ WM-4310 ]
Microphone Element
Emission
Electret condenser type, cardioid pattern
F3E
Frequency Range
Selectable Channel
RF Carrier Power
Tone Frequency
Modulation System
Maximum Input Level
Battery
690 – 865 MHz, UHF
16 channels
Less than 50 mW
32.768 kHz
PLL synthesizer
120 dB SPL
6LR61 (9 V x 1)
Battery Life
10 hours (alkaline)
Power/Battery lamp (common use)
1/4 λ herical type
Indicator
Antenna
Operating Temperature
Finish
–10 to +50°C
Resin, coating, dark gray
62 (w) x 142 (h) x 32 (d) mm
150 g (with battery)
Dimensions
Weight
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Screwdriver (for setting) .................................... 1
Channel identification seal ................................ 1
Storage case ..................................................... 1
7
Download from Www.Somanuals.com. All Manuals Search And Download.
[ WM-4310A, WM-4310H ]
Main unit
Emission
F3E
Frequency Range
Selectable Channel
RF Carrier Power
Tone Frequency
Modulation System
Maximum Input Level
Battery
690 – 865 MHz, UHF
16 channels
Less than 50 mW
32.768 kHz
PLL synthesizer
120 dB SPL
6LR61 (9 V x 1)
Battery Life
10 hours (alkaline)
Power/Battery lamp (common use)
1/4 λ herical type
–10 to +50°C
Indicator
Antenna
Operating Temperature
Finish
Resin, coating, dark gray
62 (w) x 142 (h) x 32 (d) mm
150 g (with battery)
Dimensions
Weight
Headset
Microphone Element
Power Source
Output Impedance
Cable Length
Connector
Electret type, cardioid pattern
DC (supplied from lavalier pack)
1.6 kΩ ± 30% (1,000 Hz)
1.45 m
ø3.5 mm mini-plug
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Screwdriver (for setting) .................................... 1
Channel identification seal ................................ 1
Waist pouch (WM-4310A only) ......................... 1
Printed in Taiwan
133-07-182-30
Download from Www.Somanuals.com. All Manuals Search And Download.
|