Model T311
Auto-Set Clock Radio
with Digital Tuning
For additional information, online
registration, and exclusive special
offers please visit our website:
Download from Www.Somanuals.com. All Manuals Search And Download.
A Consumer Guide to Product Safety
IMPORTANT SAFETY INSTRUCTIONS
When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in
potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions
handy for future reference. Take special note of all warnings listed in these instructions and on the unit.
1. Water and Moisture – The unit should not be used near water. For example: near a bathtub, washbowl, kitchen sink, laundry tub, swimming
pool or in a wet basement.
2. Ventilation – The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, it should not
be situated on a bed, sofa, rug or similar surface that may block ventilation openings. Also, it should not be placed in a built-in installation, such
as a bookcase or cabinet, that may impede the flow of air through the ventilation openings.
3. Heat – The unit should be situated away from heat sources such as radiators, heat registers, stoves or other appliances (including amplifiers) that
produce heat.
4. Power Sources – The unit should be connected to a power supply only of the type described in the operating instructions or as marked on the
appliance itself.
5. Grounding or Polarization – This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other).
As a safety feature this plug will fit into the power outlet only one way. If you are unable to fit the plug into the outlet, try reversing the plug. If the
plug still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of your polarized plug by forcing the
plug into the outlet.
6. Power-Cord Protection – Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them. It is always best to have a clear area from where the cord exits the unit to where it is plugged into an AC outlet.
7. Cleaning – The unit should be cleaned only as recommended. See the Maintenance section of this manual for cleaning instructions.
8. Objects and Liquid Entry – Care should be taken so that objects do not fall and liquids are not spilled into any openings or vents located on
the product.
9. Attachments – Do not use attachments not recommended by the product manufacturer.
10. Lightning and Power Surge Protection – Unplug the unit from the wall outlet during a lightning storm or when it is left unattended and
unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges.
11. Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in fire or electric shock.
12. Damage Requiring Service – The unit should be serviced by qualified service personnel when:
A. the power supply cord or plug has been damaged.
B. objects have fallen into or liquid has been spilled into the enclosure.
C. the unit has been exposed to rain.
D. the unit has been dropped or the enclosure damaged.
E. the unit exhibits a marked change in performance or does not operate normally.
13. Antenna – Do not connect an external antenna to the unit.
14. Periods of Nonuse – If the unit is to be left unused for an extended period of time, such as a month or longer, the power cord should be unplugged
from the unit to prevent damage or corrosion.
15. Servicing – The user should not attempt to service the unit beyond those methods described in the user’s operating instructions. Service methods
not covered in the operating instructions should be referred to qualified service personnel.
For questions or comments regarding this or other products, please call our toll-free number: 1-800-888-4491.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation and Maintenance
Installation
1. Remove the unit and all packing materials from the carton. You should save packing materials in case unit
needs to be returned for service. If you do not wish to save the materials, please dispose of them properly.
2. Place the unit on a stable, level surface, close to an AC outlet, out of direct sunlight, and away from sources
of dust, dirt, heat, water, moisture, vibration, and strong magnetic fields.
3. After installing the batteries (see below) and reading the Maintenance notes, plug the AC cord into an outlet.
“Sure Alarm” Battery Backup Installation
It is strongly recommended that 2 “AAA” batteries be installed into the unit, as directed below, to activate the
“Sure Alarm” battery backup feature. In the event that the AC power cord is disconnected or a power failure
or other interruption occurs, the “Sure Alarm” system will maintain the clock and alarm settings for the life of
the batteries, ensuring that the alarm will sound at the set time (note: while operating on battery power, all set
alarms will sound as a buzzer). When power has been restored, the clock will cease using the battery power,
and will once again operate on AC power.
1. Gently turn the unit over and remove the battery compartment door.
2. Install 2 "AAA" batteries (alkaline batteries are recommended for longer life) into
the battery compartment, making sure that the + and – ends match the diagram
printed inside the compartment.
3. Slide the battery compartment door back on, making sure the door locks into
place, and gently return the unit to its upright position.
Battery Compartment
Maintenance
1. Place the unit on a level surface away from direct sunlight or sources of excessive heat.
2. Protect your furniture when placing the unit on natural wood or wood with a lacquered finish. A cloth or other
protective material should be placed between the unit and the furniture.
3. Clean the casing with a soft cloth moistened only with mild soap and water. Stronger cleaning agents, such
as thinner or similar agents, are not recommended, as they may damage the surface of the case.
4. If the unit is not to be used for a prolonged period, such as a month or longer, remove the batteries to prevent
possible corrosion. Should the battery compartment become corroded or dirty, clean the compartment
thoroughly and replace the batteries.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and Indicators
Volume Thumbwheel ·
RADIO/ON
Off/Reset Button ³
» Radio On/Sleep Button
SLEEP
OFF/RESET
SNOOZE / DIMMER
¿ Snooze/Dimmer Bar
DST
BUZZER
EVERYDAY
RADIO
MON-FRI
TIME
RADIO
BUZZER
ZONE
SAT-SUN
ꢀ Radio Alarm Button
ꢁ Buzzer Alarm Button
ꢂ Time Zone Button
Time Set Button ´
Date Set / 7-5-2 Button ²
Sleep Volume Button ¶
DATE/7-5-2
SLEEP VOL
DATE
YEAR
AM
FM1
FM2
SLEEP
1
2
3
4
5
BAND
6
Radio Band Button º
>>
> >
ENTER
ꢃ Forward/Tuning Button
Memory Set 1-6 Buttons ¾
AUTO SET
Reverse/Tuning Button µ
ƺ Enter Button
5
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Display with Indicators
Radio Alarm Indicator
Daylight-Saving Time Indicator
Buzzer Alarm Indicator
7-5-2 Alarm Settings
DST
BUZZER
EVERYDAY
RADIO
MON-FRI
7-5-2 Alarm Settings
SAT-SUN
Clock
Sleep Timer
DATE
YEAR
AM
FM1
FM2
PM Indicator
Radio Band Indicator
SLEEP
Battery Low Indicator
Radio Frequency /
Calendar Display
Sleep Volume Indicator
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto-Set and Manual Time and Date Settings
Auto-Set Time and Date Settings
This model is equipped with the Auto-Set feature, meaning that the time and date have been programmed at
the factory and will already be set when you first plug the model in. Auto-Set will automatically adjust the time
and date settings for daylight-saving time and leap years. Auto-Set is programmed for Eastern Standard Time;
if you do not live in this time zone, you can easily switch the setting to one of six other time zones.
1. To change your time zone setting, press and hold the ꢂ Time Zone Button. The current Auto-Set Time
Zone in the lower-right-hand corner of the display will flash for approximately ten seconds, after which the
display will revert to the standard clock display.
2. While the Auto-Set Time Zone is flashing, press the µ Reverse and ꢃ Forward Buttons to select your
time zone. The display will show each zone’s current time setting. There are seven zones to choose from:
Auto-Set Time Zones
Z-01
Z-02
Z-03
Z-04
Z-05
Z-06
Z-07
Atlantic Standard Time
Eastern Standard Time
Central Standard Time
Mountain Standard Time
Pacific Standard Time
Alaskan Standard Time
Hawaiian Standard Time
3. Find your time zone, then press the ƺ Enter Button or wait about ten seconds for the clock to beep twice
and the setting to lock into place.
Manual Time and Date Settings
1. To change your time setting, press and hold the ´ Time Set Button so that the clock display begins flashing.
2. While the display flashes, press the µ Reverse and ꢃ Forward Buttons to set the time. Hold a button
for a few seconds to set the time rapidly. Be sure to set the correct AM/PM time, shown by the PM Indicator.
3. After setting the time, press the ƺ Enter Button or wait about ten seconds for the clock to beep twice and
the setting to lock into place.
4. To change the calendar, press and hold the ² Date/7-5-2 Button until the display shows the flashing year.
5. Press the µ Reverse and ꢃ Forward Buttons to set the current year. When you have selected the year,
press the ƺ Enter Button, then use the µ Reverse and ꢃ Forward Buttons to set the month/day.
6. After you have set the date, press the ƺ Enter Button or wait for the display to beep twice and lock into place.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the Dual Alarm System
This clock radio features a dual alarm system, with two alarms that can be operated independently. The alarms
can be set to wake two people at different times, or to have a main alarm and a backup. One alarm features
your choice of radio stations as an alarm wake sound, while the second features a buzzer wake sound. You can
set the radio alarm, the buzzer alarm, or both alarms.
Setting the Radio Alarm
1. Press and hold the ꢀ Radio Alarm Button. The display will flash and the Radio Alarm Indicator will
appear. If you do not begin setting the time within ten seconds of pressing the button, the display will stop
flashing and you will need to press the ꢀ Radio Alarm Button again.
2. While the display flashes, press the µ Reverse and ꢃ Forward Buttons to set the wake time. Hold a button
for a few seconds to set the time rapidly. Be sure to set the correct AM/PM time, as shown by the PM Indicator.
3. After setting the radio alarm time, you will need to select the station. First, press the º Radio Band Button
to select a radio frequency. Next, select a station using the ¾ Memory Set 1-6 Buttons. For more
information on programming radio stations into memory, see the Programming Radio Station Settings section
of this manual. Rotate the · Volume Thumbwheel to set the wake sound volume.
4. After setting the radio alarm wake time and sound, you will need to select the 7-5-2 setting. The 7-5-2 setting
lets you set the alarm for a full week, weekdays only, or the weekend. Before setting the alarm, be sure that
the correct date is set, as shown in the “Auto-Set” and Manual Time and Date Settings section of the manual.
While the display is still flashing, press the ² Date/7-5-2 Button until the desired setting is shown.
5. After you have set the radio alarm wake time, sound, and 7-5-2 setting, press the ƺ Enter Button. The
Radio Alarm Indicator will appear on the display, showing that the radio alarm has been set.
Setting the Buzzer Alarm
1. Press and hold the ꢁ Buzzer Alarm Button.
2. While the display flashes, press the µ Reverse and ꢃ Forward Buttons to set the buzzer alarm wake time.
3. After setting the buzzer wake time, use the ² Date/7-5-2 Button to select the 7-5-2 setting, as described
in the above section.
4. After you have set the buzzer wake time and 7-5-2 setting, press the ƺ Enter Button. The Buzzer Alarm
Indicator will appear on the display, showing that the buzzer alarm has been set.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the Dual Alarm System (Continued)
Activating the Alarms
1. To activate the radio alarm, make sure that the Radio Alarm Indicator appears on the display. If it does
not, press the ꢀ Radio Alarm Button once so that it does. As long as the indicator appears, the alarm will
sound at the set time and days.
2. To activate the buzzer alarm, make sure that the Buzzer Alarm Indicator appears on the display. If it does
not, press the ꢁ Buzzer Alarm Button once so that it does.
³
3. When the alarm sounds, press the
Off/Reset Button to turn off the alarm while still maintaining the
programmed 7-5-2 alarm settings. To turn off an alarm and cancel its 7-5-2 settings, press its Alarm Button
so that its Alarm Indicator no longer appears on the display.
4. To activate the snooze feature, press the ¿ Snooze/Dimmer Bar when the alarm sounds. The alarm will
shut off for approximately ten minutes before sounding again. The feature can be repeated several times
during the one-hour snooze cycle.
5. If it is not turned off, the alarm will sound for an hour before stopping. As long as an Alarm Indicator appears
on the display, the alarm will sound at the set time, according to the 7-5-2 settings.
Daylight-Saving Time and Leap Year Adjustments
This unit will automatically adjust the clock at the beginning and end of Daylight-Saving Time each year. It will
also adjust the month/day display for leap year automatically.
This unit automatically advances one hour at the start of Daylight-Saving Time on the first Sunday of April, and
moves back one hour at the end of Daylight-Saving Time on the last Sunday of October. If you live in an area
that does not observe Daylight-Saving Time, it will be necessary for you to manually adjust the clock back one
hour at the beginning of Daylight-Saving Time and forward one hour at the end of Daylight-Saving Time.
Adjusting the Display Backlight
• This alarm clock radio features an adjustable display backlight, with dim, medium, and bright settings. To
select a backlight setting, press the ¿ Snooze/Dimmer Bar until the desired brightness is reached.
Please note that the backlight will not work while the clock is operating on battery power.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the Radio
Operating the Radio
»
1. Press the
Radio On/Sleep Button once to turn on the radio.
»
Note: If the
Radio On/Sleep Button is pressed more than once, the unit will enter the sleep mode, with
the radio operating on a timer. See Sleeping to the Radio Using the Timer for more information about this feature.
2. Press the º Radio Band Button to select the AM band or one of the two FM bands. The Radio Band
Indicator will show which frequency is in use.
3. Press the µ Reverse and ꢃ Forward Buttons to tune into a radio station. To scan the stations, hold a
button for about three seconds. The radio will rapidly advance to the next strong signal.
4. You may also use the ¾ Memory Set Buttons to select a preset radio station. See the Programming Radio
Station Memories section for instructions on programming radio station settings.
5. Rotate the · Volume Thumbwheel to adjust the volume level.
³
6. Press the
Off/Reset Button to turn the power off.
Programming Radio Station Settings
This Alarm Clock Radio features a total of 18 programmable radio settings: 12 FM stations and six AM stations.
These allow you to preset your favorite stations and access them quickly.
»
1. Press the
Radio On/Sleep Button once to turn on the radio.
2. Press the º Radio Band Button to select a radio band. The AM/FM Radio Indicator will show which
band is in use.
3. Press the µ Reverse and ꢃ Forward Buttons to find a station to program into the memory.
4. When you have reached the station you wish to program, press and hold one of the six ¾ Memory Set
Buttons until you hear a beep. The radio station has now been programmed into that preset slot, and you
can reach the station by pressing its ¾ Memory Set Button while the radio is turned on.
5. Follow the above instructions to continue programming radio station settings into the memory. You can save
a total of 18 stations using the three bands.
6. To edit a setting, enter a different radio station as an existing ¾ Memory Set Button. This overrides the
original setting.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleeping to the Radio Using the Timer
Note: For more information about playing the radio, see the Listening to the Radio section of this manual.
»
1. Press the
Radio On/Sleep Button twice to enter the sleep mode.
2. Continue pressing the ᕡ On/Sleep Button to select a 90-, 60-, 30-, or 15-minute sleep time. When the
display shows the desired sleep time, stop pressing the button. The sleep timer setting remains active for
approximately ten seconds before returning to the standard clock display. The Sleep Indicator will appear,
showing that the radio timer has been activated.
3. Select a radio station using the º Radio Band Button and the ¾ Memory Set Buttons.
4. Press the ¶ Sleep Volume Button to adjust the sleep volume to a comfortable level without affecting the
alarm volume. The Sleep Volume Indicator will show the current sleep volume level. Turning the · Volume
Thumbwheel will also adjust the sleep volume.
5. The radio will play for the programmed sleep time and then shut off. To check how much sleep time is
»
remaining, press the
Radio On/Sleep Button once.
³
6. To turn off the radio before the sleep time has elapsed, press the
Off/Reset Button.
Antenna Information and Adjustment
FM – Extend the FM wire antenna to its full length and vary the direction to its strongest signal.
AM – The AM bar antenna is located inside the cabinet. Rotate the unit until you find the strongest AM signal.
Last Station Memory
The tuner always remembers the last station selected before the radio was switched off, and automatically selects
the station again when the radio is turned on.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited 90-Day Warranty Information
Timex Audio Products, a division of SDI Technologies Inc. (hereafter referred to as SDI Technologies), warrants this product
to be free from defects in workmanship and materials, under normal use and conditions, for a period of 90 days from the date
of original purchase.
Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased.
Should this fail to resolve the matter and service still be required by reason of any defect or malfunction during the warranty period,
SDI Technologies will repair or, at its discretion, replace this product without charge (except for a $5.00 charge for handling,
packing, return UPS/postage, and insurance). This decision is subject to verification of the defect or malfunction upon delivery
of this product to the Factory Service Center listed below. The product must include proof of purchase, including date of
purchase. The fee for service after the warranty period or without proof of purchase is $10.00.
Before returning this product for service, please first replace the batteries (if applicable) with fresh ones, as exhausted or
defective batteries are the most common cause of problems encountered.
If service is still required:
1. Remove the batteries (if applicable) and pack the unit in a well padded, heavy corrugated box.
2. Enclose a photocopy of your sales receipt, credit card statement, or other proof of the date of purchase, if within the
warranty period.
3. Enclose a check or money order payable to the order of SDI Technologies, for the sum of $5.00 ($10.00 after warranty period).
4. Send the unit prepaid and insured, to the Factory Service Center listed below.
Consumer Repair Department
SDI Technologies Inc.
Timex Audio Products Division
1401 Pullman Drive, Suite A
El Paso, TX 79936-7726
NOTE: This warranty is valid only if the product is used for the purpose for which it was designed. It does not cover (i) products
which have been damaged by negligence, misuse or accident, or which have been modified or repaired by unauthorized
persons; (ii) cracked or broken cabinets, or units damaged by excessive heat; (iii) damage to CD’s or tape cassettes (if
applicable); (iv) the cost of shipping this product to the Factory Service Center and its return to the owner.
This warranty is valid only in the United States of America and does not extend to owners of the product subsequent to the
original purchaser. Any applicable implied warranties are also limited to 90 days, and SDI Technologies will not be liable for
consequential damages. (Some states do not allow limitations on implied warranties or exclusion of consequential damages,
so these restrictions may not apply to you.) This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
For questions or comments regarding this or other products, please call our toll-free number 1-800-888-4491.
TIMEX is a registered trademark of Timex Corporation in the U.S. and other countries.
T311-071603-02
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|