STOP
PLAY
EJECT
MENU
VOLUME
CHANNEL
SELECT
POWER
If you need additional operating assistance
after reading this owner's manual or to order
replacement accessories, please call
TOLL FREE : 1-800-242-7158 or visit our
STL20D5
20
Download from Www.Somanuals.com. All Manuals Search And Download.
9.Ventilation-Slots and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliable
operation of the unit and to protect it from overheating, and
these openings must not be blocked or covered. The open-
ings should never be blocked by placing the unit on a bed,
sofa, rug, or other similar surface. This unit should never be
placed near or over a radiator or heat register. This unit
should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or
the manufacturer’s instructions have been adhered to.
14.Lightning-For added protection for this unit receiver dur-
ing a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable system. This will
prevent damage to the unit due to lightning and power-line
surges.
15.Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall into
such power lines or circuits. When installing an outside
antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.
10.Power Sources-This unit should be operated only from the
type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, con-
sult your appliance dealer or local power company. For the
units intended to operate from battery power, or other
sources, refer to the operating instructions.
16.Overloading-Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
17.Object and Liquid Entry-Never push objects of any kind
into this unit through openings as they may touch danger-
ous voltage points or short out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the
unit.
11.Grounding or Polarization-This unit is equipped with a
polarized alternating-current line plug(a plug having one
blade wider than the other). This plug will fit into the
power outlet only one way. This is a safety feature. If you
are unable to insert the plug fully into the outlet, try revers-
ing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
18.Servicing-Do not attempt to service this unit yourself as
opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified
service personnel.
12.Power-Cord Protection-Power-supply cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying par-
ticular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
19.Damage Requiring Service-Unplug this unit from the wall
outlet and refer servicing to qualified service personnel
under the following conditions:
a. When the power-supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into the
unit.
13.Outdoor Antenna grounding-If an outside antenna or
cable system is connected to the unit, be sure the antenna
or cable system is grounded so as to provide some protec-
tion against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/NFPA
No. 70, provides information with respect to proper
grounding of the mast and supporting structure, grounding
of the lead-in wire to an antenna discharge unit, size of
grounding conductors, location of antenna-discharge unit,
connection to grounding electrodes, and requirements for
the grounding electrode. (Fig. A)
c. If the unit has been exposed to rain or water.
d. If the unit does not operate normally by following the oper-
ating instructions. Adjust only those controls that are cov-
ered by the operating instructions, as improper adjustment
of other controls may result in damage and will often
require extensive work by a qualified technician to restore
the unit to its normal operation.
e. If the unit has been dropped or damaged in any way.
f. When the unit exhibits a distinct change in performance,
this indicates a need for service.
FIGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
20.Replacement Parts-When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer that have the same character-
istics as the original part. Unauthorized substitutions may
result in fire, electric shock, injury to persons or other haz-
ards.
ANTENNA
LEAD I N
WI RE
GROUND
CL AMP
21.Safety Check-Upon completion of any service or repairs to
this unit, ask the service technician to perform routine safe-
ty checks to determine that the unit is in proper operating
condition.
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
22.Heat-This unit product should be situated away from heat
sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
ELECTRI C
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC
-
NATIONAL ELECTRICAL CODE
S2898A
- 3 -
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PRECAUTIONS
IMPORTANT COPYRIGHT INFORMATION
LASER SAFETY
Unauthorized copying, broadcasting, public performance
and lending of discs are prohibited.
This unit employs a laser. Only a qualified service person
should remove the cover or attempt to service this device,
due to possible eye injury.
This product incorporates copyright protection technology
that is protected by U.S. patents and other intellectual prop-
erty rights. Use of this copyright protection technology must
be authorized by Macrovision, and is intended for home and
other limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly is pro-
hibited.
CAUTION: USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE.
CAUTION: VISIBLE AND INVISIBLE LASER RADIA-
TION WHEN OPEN AND INTERLOCK DEFEATED.
DO NOT STARE INTO BEAM.
FCC WARNING- This equipment may generate or use
radio frequency energy. Changes or modifications to
this equipment may cause harmful interference unless
the modifications are expressly approved in the instruc-
tion manual. The user could lose the authority to oper-
ate this equipment if an unauthorized change or modi-
fication is made.
LOCATION: INSIDE, NEAR THE DECK MECHA-
NISM.
This Class B digital apparatus complies with Canadian
ICES-003.
RADIO-TV INTERFERENCE
Cet appareil numérique de la classe B est conforme à la
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful inter-
ference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT,
FULLY INSERT.
ATTENTION: POUR ÉVITER LES CHOC
ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS
LARGE DE LA FICHE DANS LA BORNE CORRE-
SPONDANTE DE LA PRISE ET POUSSER JUSQU’AU
FOND.
A NOTE ABOUT RECYCLING
Batteries should never be thrown away or incinerated but
disposed of in accordance with your local regulations con-
cerning chemical wastes.
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and
receiver.
3) Connect the equipment into an outlet on a circuit differ-
ent from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV techni-
cian for help.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
THIS SYMBOL INDICATES THAT
DANGEROUS VOLTAGE
CONSTITUTING A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS SYMBOL INDICATES THAT THERE
CAUTION: TO REDUCE THE RISK OF ELECTRIC
ARE IMPORTANT OPERATING AND
SHOCK, DO NOT REMOVE COVER (OR BACK). NO
MAINTENANCE INSTRUCTIONS IN THE
USER SERVICEABLE PARTS INSIDE. REFER
LITERATURE ACCOMPANYING THE
SERVICING TO QUALIFIED SERVICE PERSONNEL.
APPLIANCE.
The caution marking is located on the rear of the cabinet.
- 4 -
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCATION
SYMBOLS USED IN THIS MANUAL
The following symbols below appear in some head-
ings in this manual.
For safe operation and satisfactory performance of
your unit, keep the following in mind when selecting
a place for its installation:
Shield it from direct sunlight and keep it away
from sources of intense heat.
•
: Description refers to playback of DVD video discs
(in the DVD mode).
Avoid dusty or humid places.
Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes
at the top or bottom of the unit. Do not place the
unit on a carpet because this will block the ventila-
tion holes.
•
•
: Description refers to playback of Audio CDs
(in the DVD mode).
Install unit in a horizontal position.
Avoid locations subject to strong vibration.
Do not place the unit near strong magnetic fields.
Avoid moving the unit to locations where tempera-
•
•
: Description refers to playback of CDs with MP3
files (in the DVD mode).
•
•
ture differences are extreme.
QUICK
Be sure to remove a disc and unplug the AC power
cord from the outlet before carrying the unit.
•
: Description refers to the items to be set by the
QUICK mode (in the DVD mode).
AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE
Do not handle the power cord with wet hands.
Do not pull on the power cord when disconnecting
it from an AC wall outlet. Grasp it by the plug.
TILT STAND
You can adjust the stand to change the angle of the
TV (-5° to 10°).
•
•
If by accident, water is spilled on your unit, unplug
the power cord immediately and take the unit to our
Authorized Service Center for servicing.
•
10°
-5°
Do not put your fingers or objects into the unit
disc slot.
•
Do not place anything directly on top of the unit.
•
WARNING
Moisture condensation may occur inside the unit
when it is moved from a cold place to a warm place
or after heating a cold room or under conditions of
high humidity. If a DVD is played in a unit which
has moisture, it may damage the DVD and the unit.
Therefore when the condensation occurs inside the
unit, turn the unit on and allow at least 2 hours for
the unit to dry out.
- 5 -
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . .2
SEARCH FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . .22
TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
TITLE / CHAPTER SEARCH . . . . . . . . . . . . . . . . . . .22
TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
MARKER SETUP SCREEN . . . . . . . . . . . . . . . . . . . .23
PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
AVOID THE HAZARDS OF
SPECIAL PLAYBACK FUNCTION . . . . . . . . . . . . . . . . .24
REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
RANDOM PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .25
ELECTRICAL SHOCK AND FIRE . . . . . . . . . . . . . . . .5
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . . . .5
TILT STAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . .6
FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
CHANGING THE SETTINGS . . . . . . . . . . . . . . . . . . . . .26
SUBTITLE LANGUAGE . . . . . . . . . . . . . . . . . . . . . . .26
AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . .26
STEREO SOUND MODE . . . . . . . . . . . . . . . . . . . . . .26
CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . . . . . . .27
BLACK LEVEL SETTING . . . . . . . . . . . . . . . . . . . . . .27
VIRTUAL SURROUND . . . . . . . . . . . . . . . . . . . . . . . .27
OPERATING CONTROLS AND FUNCTIONS . . . . . . . . . .8
INSTALLING THE BATTERIES . . . . . . . . . . . . . . . . . .9
PREPARATION FOR USE . . . . . . . . . . . . . . . . . . . . . . .10
ANTENNA/CABLE CONNECTION . . . . . . . . . . . . . . .10
EXTERNAL CONNECTION . . . . . . . . . . . . . . . . . . . . .11
THE ON-SCREEN INFORMATION . . . . . . . . . . . . . . . . .28
TV SECTION
CHANGING THE DVD SET UP ITEMS . . . . . . . . . . . . . .29
CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
D LANGUAGE SETTING . . . . . . . . . . . . . . . . . . . . .29
E DISPLAY SETTING . . . . . . . . . . . . . . . . . . . . . . . .30
F AUDIO SETTING . . . . . . . . . . . . . . . . . . . . . . . . .30
TV OPERATION AND SETTINGS . . . . . . . . . . . . . . . . .12
WATCHING A TV PROGRAM . . . . . . . . . . . . . . . . . .12
CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .13
PICTURE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . .14
BACK LIGHT SETTING . . . . . . . . . . . . . . . . . . . . . . .14
SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
CLOSED CAPTION SYSTEM . . . . . . . . . . . . . . . . . .15
MTS (Multi-Channel Television Sound) System . . . . . .15
V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
G
H
PARENTAL CONTROL . . . . . . . . . . . . . . . . . . . . .31
OTHER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . .31
INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . .33
MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
A
TV RATING SET UP . . . . . . . . . . . . . . . . . . . . . . .16
DISC HANDLING . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
B MPAA RATING SET UP . . . . . . . . . . . . . . . . . . . .17
C CHANGE ACCESS CODE . . . . . . . . . . . . . . . . . .17
MENU LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . .17
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
DVD SECTION
ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . .18
UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . .18
PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . .19
DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
STEP BY STEP PLAYBACK . . . . . . . . . . . . . . . . . . .20
FAST FORWARD / FAST REVERSE . . . . . . . . . . . . .21
SLOW FORWARD / SLOW REVERSE . . . . . . . . . . . .21
ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
- 6 -
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
TV Mode
MTS/SAP Tuner
Infrared remote control
Trilingual on screen TV setup display available in
English, Spanish or French
181 channel capability PLL frequency synthesizer
tuner with direct station call (A converter may be
necessary to view scrambled cable channels.)
Auto power off system–If there is no air signal input
from the antenna terminal and no operation for 15
minutes, the unit will turn itself off automatically.
Sleep timer–Allows you to have the unit automati-
cally turn off at a desired time.
•
•
•
•
•
•
•
V-CHIP–Enables parents to prevent their children
from watching inappropriate material on TV.
Closed Caption Decoder–You may view specially
•
labeled (cc) TV programs, movies, news, etc. with
either a dialogue caption or text display added to
the program.
DVD Mode
Dolby Digital sound
Parental lock
You can set the control level to limit playback of
discs which may not be suitable for children.
•
•
•
•
This unit can handle Dolby Digital surround sound
having 5.1 channels when connected to a Dolby
Digital decoder.
Automatic detection of discs
This unit automatically detects if the loaded disc is
DVD, Audio CD or MP3 on disc.
Still/fast/slow/step playback
•
Various playback modes are available including
still pictures, fast forward/reverse, slow motion and
step frames.
On-screen display
Information about the current operation can be dis-
played on a TV screen, allowing you to confirm
the currently active functions (such as program
playback), on the TV screen using the remote con-
trol.
Random playback for Audio CD and MP3
This unit can shuffle the order of tracks to play
them in random order.
•
Program playback for Audio CD and MP3
You can program the order of tracks to play them
in any desired order.
•
Search
•
Chapter search / Title search / Track search / Time
search
DVD menus in a desired language
You can display DVD menus in a desired lan-
guage, if available on a DVD.
•
Repeat
•
•
•
•
Chapter / Title / Track / Group / All / A-B
Screen saver
Zoom
•
If the screen saver program is set to ON, it starts
when there is no input from the unit for 5 minutes
in stop mode.
Allows you to enlarge video image.
Marker
The part designated by user can be called back.
Subtitles in a desired language
You can select a desired language for the display
subtitles, if that language is available on a disc.
•
Resume Play
User can resume to playback from the part at
which the play was stopped.
Selecting a camera angle
You can select the desired camera angle, if a disc
contains sequences recorded from different angles.
•
Virtual Surround
Bit rate indication
•
•
•
Choices for audio language and sound mode
•
DRC (Dynamic range control)
You can control the range of sound volume.
You can select the desired audio language and
sound mode, if different languages and modes are
available on a disc.
- 7 -
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATING CONTROLS AND FUNCTIONS
NOTE
O
A
When you select DVD mode, press [PLAY ] or [EJECT ] first or insert a disc into the disc slot.
•
Otherwise, the DVD features are not operated.
- REMOTE CONTROL
9.SETUP button (P13, P.29)
Press to enter or exit the setup menu of TV/DVD.
10. TITLE button (P.20)
POWER
SELECT
PICTURE
EJECT
CH.
Press to display the title menu.
1
2
15
16
11. CLEAR button (P12, P.22)
1
4
2
5
8
0
3
6
Press to clear/cancel a setting currently entered.
Press to clear “DISC INSIDE” display.
17
3
4
12. MODE button (P.25)
7
SLEEP
9
Press to call up the program/random screen in
stop mode.
VOL.
+100
+10
ZOOM
18
Press to call up the Black Level Setting/Virtual
Surround screen during playback.
MUTE
SKIP
19
20
21
13. SEARCH MODE button (P.22, P23)
5
6
Press to locate a desired point.
PLAY
STOP
SLOW
REV
FWD
14. AUDIO button (P.26)
For TV mode (P.15): Press to select TV sound
22
DISC
mode (STEREO/SAP/MONO).
MENU
PAUSE
For DVD mode (P.26): Press to select a desired
audio language (if available).
7
8
9
10
11
23
24
25
DISPLAY
SETUP
ENTER
15. EJECT A button (P.19)
TITLE
RETURN
Press to remove a disc from the unit.
26
27
CLEAR SEARCH MODE REPEAT
A-B
16. SELECT button (P.12)
Press to select the TV mode, external input mode
or DVD mode.
MODE
AUDIO SUBTITLE ANGLE
12
13
14
28
29
30
K
L
17. CH.
/
buttons (P.12)
Press to select memorized channels.
X
Y
18. VOL.
/
buttons (P.12)
[Fig. 1]
Press to control the volume level for the DVD
and TV.
1.POWER button (P.12)
Press to turn the power on and off.
2.PICTURE button (P.14)
Press to adjust the picture.
19. MUTE button (P.12)
Press to mute the sound or press it again to
restore sound.
3.Number buttons (P.13)
20. ZOOM button (P.21)
Press to select a desired channel number directly.
+100 button (For TV mode)
Press to enlarge the part of a DVD-reproduced
image.
Press to select channels higher than 99.
+10 button (For DVD mode)
E
21. REV
button (P.21)
Press to view the DVD picture in fast/slow
reverse motion.
Press to enter desired numbers higher than 9.
4.SLEEP button (P.14)
Press to set the Sleep Timer.
5.SKIP H / G buttons (P.22)
Press once to skip chapters/tracks to a desired point.
6.PLAY O button (P.19)
Press to playback the disc.
7.PAUSE F button (P.20)
Press to pause the current disc operation.
D
FWD
button (P.21)
Press to view in fast/slow forward motion.
22. STOP C button (P.19)
Press to stop operation of the disc.
23. DISC MENU button (P.20)
Calls up the DVD menu.
Calls up the file list in MP3 disc.
24. ENTER button (P.16)
8.DISPLAY button
For TV mode (P.15):
Press to accept a setting.
25.
K
(Up) /
L
(Down) / { (Left) / B (Right) buttons
Press to display the current channel number on
the TV screen.
Press to select or adjust menu items.
For DVD mode (P.28):
P
ress to display the current status on the TV screen.
- 8 -
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
26. RETURN button (P.27)
29. REPEAT button (P.24)
Press to return to the previous screen in the setup
menu.
Repeats playback of the current disc, title, chap-
ter, group or track.
27. A-B button (P.24)
30. SUBTITLE button (P.26)
Press to repeat the playback of a selected section.
Press to select a desired subtitle language.
28. ANGLE button (P.27)
Press to change the camera angle to see the
sequence being played back from a different angle
(if available).
- FRONT PANEL
31. STOP P button (P.19)
Press to stop operation of the disc.
32. MENU button
Press to enter or exit the setup menu of TV/DVD.
X
Y
33. VOLUME
/
buttons (P.12)
Press to control the volume level for the DVD
and TV.
X
Y
34. CHANNEL
/
buttons (P.12)
Press to select memorized channels.
STOP
PLAY
EJECT
MENU
VOLUME
CHANNEL
SELECT
POWER
35. SELECT button (P.12)
Press to select to TV mode, external input mode
or DVD mode.
36. POWER button (P.12)
STOP
PLAY
EJECT
Press to turn the power on and off.
MENU
VOLUME
CHANNEL
SELECT
POWER
N
37. EJECT button (P.19)
Press to remove a disc from the unit.
38. Remote sensor window
39. PLAY O button (P.19)
31 32 33
34 35 36 37 38 39
[Fig. 2]
Press to playback of the disc.
INSTALLING THE BATTERIES
BATTERY PRECAUTIONS
1 Open the battery compartment cover by
pressing the cover on the remote unit in the
direction of the arrow.
Be sure to follow the correct polarity as indicated
•
in the battery compartment. Reversed batteries
may cause damage to the device.
2 Insert 2 “AA” penlight batteries into the bat-
tery compartment in the direction indicated by
the polarity (+/-) markings.
Do not mix different types of batteries together
(e.g. Alkaline and Carbon-Zinc) or old batteries
with fresh ones.
•
If the device is not to be used for a long period of
time, remove the batteries to prevent damage or
injury from possible battery leakage.
•
3 Replace the cover.
Do not try to recharge batteries not intended to be
recharged; they can overheat and rupture.
•
NOTE
We do not recommend the use of universal remote controls. Not all of the functions may be controlled
•
with a universal remote control.
If you decide to use a universal remote control with this unit, please be aware that the code number given
may not operate this unit. In this case, please call the manufacturer of the universal remote control.
- 9 -
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION FOR USE
ANTENNA/CABLE CONNECTION
NOTE
Cables used here are commercially available.
For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. jack
before moving the unit.
•
•
- ANTENNA/CABLE CONNECTION (WITH OR WITHOUT BOX)
[Rear of this unit]
Antenna
Cable TV
signal
or
L
UT
DIGITA
L)
UDIOIA
(C
O
A
AX
O
2
O
E
ID
V
R
IO
D
U
A
L
T
N
E
N
Y
O
P
M
P
C
Incoming cable from home Antenna /
Cable Company (No Cable Box)
b
P
r
P
R
IO
D
U
A
L
1
O
O
VIDE
E
ID
V
S-VIDEO
NT
A
Cable Box or
Satellite Box*
OR
NE
PHO
D
EA
H
OUT
IN
ANT
Incoming cable from Cable Company
or Satellite Antenna
*Some cable TV systems use scrambled signals and
require a special converter to receive these channels.
Consult your local cable company.
IF YOU HAVE A JACK ON THE WALL
Connect the TV to the wall-mounted antenna jack
with on RF cable (commercially available).
WHEN USING CABLE BOX/SATELLITE
BOX
If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown above.
Channel selection must be made with the converter
box or satellite box. This means that channels cannot
be changed using the remote control of this unit.
IF YOU HAVE A WIRED CABLE
Connect the TV to the wired antenna cable.
NOTE
Bent pin
Before plugging the antenna into the ANT. jack of the unit, check that the pin
is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into
the ANT. jack of the unit.
•
Cable
Plug
(Needs to be
straightened)
(Straight pin)
For CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.
•
- 10 -
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
EXTERNAL CONNECTION
You can connect this unit to your own Audio/Video
equipment.
Be sure to turn off the power to all components in
the system before connecting another component.
•
L
T
U
A
IT
O
)
IG
O
L
I
D
A
A
D
I
U
X
A
AUDIO
O
C
(
Refer to the Owner’s Manuals for the equipments
to be connected to the unit.
•
O2
VIDE
R
L
Y
AUDIO
CPMPONENT
b
P
VIDEO2
VIDEO1
r
P
R
L
AUDIO
O
NOTE
O1
E
ID
V
VIDE
O
E
ID
-V
S
T
N
A
E
ON
When you use the external input, select “VIDEO1” or
“VIDEO2” by pressing [SELECT]. (Refer to page 12.)
H
P
D
EA
H
To use the VIDEO1 input jacks, select “VIDEO1”.
To use the VIDEO2 input jacks, select “VIDEO2”.
•
•
- VIDEO1 INPUT
Use this connection if your own A/V equipment (e.g.
VCR) has Video output and Audio out jacks. When
using S-Video cable, better picture is available.
ex.
(IN)
Audio Cable
(OUT)
R
AUDIO
L
Video Cable
OR
(IN)
(OUT)
(OUT)
VIDEO1
EO
VID
(IN)
Video Cassette
Recorder
S-VIDEO
S-Video Cable
NOTE
If your own equipment is monaural (has only one Audio jack), connect the Audio cable to AUDIO L jack of this unit.
If you connect Video jack and S-VIDEO jack simultaneously, the S-VIDEO jack is given priority over the VIDEO jack.
•
•
- VIDEO2 INPUT
Use this connection if your own A/V equipment (e.g.
video camera, video game) has COMPONENT
Video output (Y, Pb, Pr) jacks. You can enjoy the
best picture with this connection.
ex.
VIDEO2
R
Audio Cable
AUDIO
L
(IN)
(OUT)
(OUT)
Video Camera
COMPONENT
Y
Component
Video Cable
Pb
Pr
(IN)
Video Game
- AUDIO OUTPUT
You can enjoy DVD sound with more
presence by connecting digital audio
equipment such as Dolby Digital decoder.
To COAXIAL DIGITAL
AUDIO INPUT jack
Home Audio System
DIGITAL
AUDIO OUT
(COAXIAL)
(OUT)
Dolby Digital decoder
NOTE
The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.
If connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “BITSTREAM” for audio output in the setup mode. (Refer to page 30.)
Unless connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “PCM” for audio output in the setup mode. Playing
a unit using incorrect settings may generate noise distortion and may also damage the speakers. (Refer to page 30.)
•
•
•
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol
are trademarks of Dolby Laboratories.
- 11 -
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TV SECTION
TV OPERATION AND SETTINGS
NOTE
POWER
SELECT
PICTURE
EJECT
For channel number selection with number
buttons:
To select single-digit channel number, press
•
1
4
2
5
8
0
3
6
[0] first. (e.g. Press [0] [2] for channel 2.)
CH.
To select cable channels which are higher
•
than 99, press [+100/+10] first.
(e.g. Press [+100/+10] [2] [5] for channel 125.)
7
SLEEP
9
VOL.
+100
+10
ZOOM
X
Y
4 Use [VOL.
/
] to select the desired volume
MUTE
SKIP
level.
PLAY
STOP
SLOW
REV
FWD
VOL.
VOLUME 20
DISC
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
MENU
PAUSE
Press [MUTE] to instantly mute the sound.
Press it again to restore the previous volume
level.
•
DISPLAY
SETUP
ENTER
TITLE
RETURN
NOTE
If you use [CH.
you can change the TV channels. Even if you
turn off the unit in the DVD mode, when you
turn it on again, it will go into the TV mode.
CLEAR SEARCH MODE REPEAT
A-B
K
L
/
] in the DVD mode,
•
Shaded buttons are used for following operation.
•
WATCHING A TV PROGRAM
1 Plug the power cord into a standard
TO WATCH CABLE OR SATELLITE
CHANNEL
AC outlet.
If the unit is connected to a cable box or satellite
NOTE
K
L
box, using [CH.
/
] select CH3 or CH4 accord-
If any digits are displayed in the corner of the
•
ing to the output channel setting of the device and
select desired channel on that device.
screen, press [POWER] without unplugging
the power cord.
TO WATCH EXTERNAL INPUT
When an external equipment is connected to the front
2 Press [POWER] to turn on the unit.
POWER
AUDIO/VIDEO input jacks, press [SELECT] or
K
L
[CH.
/
] repeatedly until “VIDEO1” or
“VIDEO2” appears on the screen.
K
L
3 Use [CH.
/
] to select the desired channel
NOTE
number.
If a disc is inside the unit, “DISC INSIDE” mes-
sage is displayed on the screen for 10 seconds.
•
CH.
OR
Use the Number buttons to enter the desired
channel number.
DISC INSIDE
1
4
7
2
5
8
3
6
To clear the message instantly, press [CLEAR].
•
9
+100
0
+10
- 12 -
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDING/DELETING CHANNELS
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channel into the memory again.)
CHANNEL SET UP
AUTO CHANNEL PROGRAMMING
As the initial setting, this unit has memorized all
channels, including the ones not available in your
area. This feature automatically puts only available
channels into the memory.
1 Press [SETUP] then press [K] or [L] to point
to “CHANNEL SET UP”.
- TV SET UP -
1 Press [SETUP] then press [K] or [L] to point
B
CHANNEL SET UP
V-CHIP SET UP
SETUP
LANGUAGE [ENGLISH]
to “CHANNEL SET UP”.
CAPTION
[OFF]
BACK LIGHT [BRIGHT]
- TV SET UP -
B
CHANNEL SET UP
V-CHIP SET UP
SETUP
LANGUAGE [ENGLISH]
CAPTION
[OFF]
2 Press [ENTER] then press [K] or [L] to point
BACK LIGHT [BRIGHT]
to “ADD/DELETE CH”.
– CHANNEL SET UP –
2 Press [ENTER] then press [K] or [L] to point
B
ADD / DELETE CH (CATV)
AUTO PRESET CH
to “AUTO PRESET CH”.
ENTER
– CHANNEL SET UP –
ADD / DELETE CH (CATV)
B
AUTO PRESET CH
ENTER
3 Press [ENTER] then press the Number but-
tons or [CH.
L] to select the desired
K
/
channel number.
3 Press [ENTER].
15
1
4
7
2
5
8
3
6
ENTER
ENTER
9
+100
The tuner scans and memorizes all the active
channels in your area.
The tuner stops on the lowest memorized channel.
•
•
0
+10
ADD/DELETE
4 Press [ENTER] then the channel number
turned to red. The channel is deleted from
memory. If the channel number turned to
blue, the channel is added into memory.
NOTE
When “AUTO PRESET CH” is activated
•
where there is no TV signal input, “NO TV
SIGNAL” will appear on the display after the
completion of channel scanning.
ENTER
To delete another channel, repeat steps 3 to 4.
If you press [ENTER] again, the channel is
memorized again.
•
•
The unit may recognize CATV channels to be
TV channels if reception condition is poor. In
this case, check the antenna connection and try
“AUTO PRESET CH” again when reception
conditions are better.
Channel memory programming is NOT nec-
essary when connected to a cable box or satel-
lite box. Just select the channel for cable box
or satellite input (ex. CH3) on the unit, then
select your desired channel on the cable box
or satellite box.
•
•
Added channel : Light blue
Deleted channel : Light red
5 Press [SETUP] to exit the menu.
SETUP
NOTE
To confirm that channel(s) has been deleted
•
K
L
or added, use [CH.
/
].
- 13 -
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER
SLEEP
SELECT
PICTURE
EJECT
NOTE
The picture control display will disapper automati-
cally after 10 seconds unless you press any buttons.
•
3
+100
0
+10
ZOOM
MUTE
SKIP
BACK LIGHT SETTING
PLAY
STOP
SLOW
1 Press [SETUP] then press [K] or [L] to point
REV
FWD
to “BACK LIGHT”.
- TV SET UP -
DISC
MENU
PAUSE
CHANNEL SET UP
V-CHIP SET UP
SETUP
LANGUAGE [ENGLISH]
CAPTION
[OFF]
DISPLAY
SETUP
B
BACK LIGHT [BRIGHT]
ENTER
TITLE
RETURN
2 Press [ENTER] then press [s] or [B] to
CLEAR SEARCH MODE REPEAT
A-B
select to “BRIGHT”, “NORMAL” or “DARK”.
MODE
AUDIO SUBTITLE ANGLE
ENTER
Shaded buttons are used for following operation.
•
3 Press [SETUP].
SETUP
PICTURE CONTROL
The unit’s picture controls, brightness, contrast,
color, tint and sharpness, are preset to factory speci-
fications. Although they are usually the best, you
may need to make some further adjustments for a
more natural looking image.
SLEEP TIMER
The Sleep Timer function turns off the unit without
using [POWER] after a desired period of time.
1 Press [PICTURE] then press [K] or [L] to
select the desired control “BRIGHTNESS”,
“CONTRAST”, “COLOR”, “TINT” or “SHARP-
NESS”.
1 Press [SLEEP].
SLEEP
SLEEP 0 MINUTE
PICTURE
BRIGHTNESS
2 Press [SLEEP] repeatedly until the desired
-
+
sleep time is displayed.
SLEEP
2 Press
[s] or [B] to adjust to your desired
level within 5 seconds.
Each press increases the time by 10 minutes up
to 90 minutes.
•
After 5 seconds, the Sleep Timer setting will
disappear automatically.
•
If you select “SLEEP 0 MINUTE”, Sleep Timer
setting is cancelled.
•
BRIGHTNESS
CONTRAST
COLOR
to decrease
to increase
brightness
to increase
contrast
brightness
to decrease
contrast
to pale
to brilliant
TINT
SHARPNESS
to purple
to soft
to green
to clear
Even if there is a power failure of any kind, the
unit will retain its memory for this feature.
•
- 14 -
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
CLOSED CAPTION SYSTEM
You can view specially labeled (cc) TV programs,
movies, news and pre-recorded tapes with either a
dialogue caption or text display.
Even if there is a power failure of any
kind, the unit will retain its memory for
this feature.
•
CAPTION mode: You can watch dramas, movies and
news while captioning the dialogues and the contents
of news.
TEXT mode: You can watch half screen text informa-
tion if you want.
1-2: You may get these captions or text information
by selecting either “1” or “2”. Caption “2” is usually
used for a second language if available.
MTS (Multi-Channel Television
Sound) System
TO SELECT TV SOUND MODE
1 Press [AUDIO] repeatedly to select the MTS
output mode.
NOTE
Not all programs are broadcast with closed cap-
AUDIO
•
tions. Your unit is designed to provide error free
closed captions from high quality antenna, cable
and VCR signals. Conversely, poor quality sig-
nals are likely to result in caption errors or no
captions at all. Common signal conditions which
may cause caption errors are listed below:
STEREO
The output mode changes as described below
every time you press [AUDIO].
•
STEREO
SAP*
MONO
Automobile ignition noise
Electric motor brush noise
Weak snowy reception on TV screen
Multiplex signal reception displaying picture
ghosts or airplane flutter
If the unit displays a black box on the TV
screen, this means that the unit is set to the
TEXT mode. To clear screen, select “CAP-
TION1”, “CAPTION2” or “OFF”.
–
–
–
* Second Audio Program (SAP):
–
Sometimes broadcasters add another channel of
audio to the programs they air. This is usually a
secondary language or perhaps a radio station.
After 5 seconds, the current audio status will
disappear from the TV screen.
•
•
NOTE
The initial setting is “STEREO”.
This setting is saved even if the unit is turned
off or the AC cord is unplugged.
•
•
TO CHECK THE SOUND STATUS
By pressing [DISPLAY], the status shown below
will appear on the display when you receive a broad-
cast on the unit tuner channel you are watching.
1 Press [SETUP] then press [K] or [L] to point
to “CAPTION”.
- TV SET UP -
CH 123
CHANNEL SET UP
V-CHIP SET UP
SETUP
STEREO/SAP
3)
2)
1)
LANGUAGE [ENGLISH]
B
CAPTION
[OFF]
BACK LIGHT [BRIGHT]
2 Press [ENTER] repeatedly to select the
desired caption menu “CAPTION1”, “CAP-
TION2”, “TEXT1” or “TEXT2”.
- TV SET UP -
1) When a program is broadcast in stereo,
“STEREO” appears on the TV screen.
CHANNEL SET UP
V-CHIP SET UP
2) When a program is broadcast in second audio,
LANGUAGE [ENGLISH]
ENTER
[CAPTION1]
B
CAPTION
“SAP” appears on the TV screen.
BACK LIGHT [BRIGHT]
3) When a program broadcast both in stereo and sec-
ond audio, “STEREO/SAP” appears on the TV
screen.
If you select “OFF”, Closed Caption System set-
ting is cancelled.
•
3 Press [SETUP] to exit the menu.
SETUP
- 15 -
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
TV RATING SET UP
A
1
4
2
5
8
0
3
6
CH.
Follow steps to in the V-CHIP SET UP.
1
3
7
SLEEP
9
4 Press [K] or [L] to select the desired TV rat-
ing to be blocked then press [ENTER] repeat-
edly to set “BLOCK” or “VIEW”.
VOL.
+100
+10
ZOOM
MUTE
SKIP
B
TV–Y
TV–Y7
TV–G
TV–PG (
TV–14
TV–MA(
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
(
)
PLAY
STOP
SLOW
ENTER
)
)
)
(
REV
FWD
DISC
MENU
PAUSE
Selection
TV-Y
TV-Y7
TV-G
Rating Category Explanations
Appropriate for all children
Appropriate for children seven and older
General Audience
DISPLAY
SETUP
ENTER
TITLE
RETURN
TV-PG
TV-14
Parental Guidance suggested
Unsuitable for children under 14
Shaded buttons are used for following operation.
•
TV-MA Mature audience only
V-CHIP SET UP
V-CHIP SET UP
This feature enables parents to prevent their children
from watching inappropriate material on TV. When
you try to access a program which is blocked, “PRO-
TECTED PROGRAM by ...” message appears on
the TV screen.
NOTE
When you select a rating and set it to
•
“BLOCK”, the higher ratings will be blocked
automatically. The lower ratings will be avail-
able for viewing.
TV–Y
TV–Y7
TV–G
TV–PG (DLSV )
TV–14 (DLSV)
TV–MA ( LSV)
[VIEW]
(
)
[VIEW]
B
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
1 Press [SETUP] then press [K] or [L] to point
to “V-CHIP SET UP”.
- TV SET UP -
When you set the lowest rating to “VIEW”, all
other ratings will automatically be available
for viewing.
•
CHANNEL SET UP
B
V-CHIP SET UP
SETUP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
5 When you select the ratings of TV-Y7, TV-PG,
TV-14 or TV-MA you will have the option of
setting sub rating categories.
2 Press [ENTER] then press the Number
Buttons to enter the access code.
ACCESS CODE
1
4
7
2
5
8
3
6
9
Press [K] or [L] to select a rating with sub-
ratings you wish to block, then press
[ENTER] twice.
Press [K] or [L] to select a sub-rating, then
press [ENTER] to set it to “BLOCK” or “VIEW”.
_
_
_
_
ENTER
0
For the first time set-up or in the event the unit
has lost power, enter the default code of 0000.
•
Selection
TV-Y7
FV
Rating Category Explanations
3 Press [K] or [L] to select “TV RATING”,
Fantasy Violence
“MPAA RATING” or “CHANGE CODE” then
TV-PG, TV-14, TV-MA
press [ENTER].
D
L
S
Suggestive Dialog (TV-PG, TV-14 only)
– V-CHIP SET UP –
Coarse Language
Sexual Situation
Violence
B TV RATING
MPAA RATING
CHANGE CODE
ENTER
V
NOTE
A
B
C
TV RATING:
MPAA RATING: See
CHANGE CODE: See
See
TV RATING SET UP
MPAA RATING SET UP
CHANGE ACCESS CODE
The blocked sub-ratings will appear next to
the rating category in the “TV RATING”
menu.
•
- 16 -
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
Make sure you enter exactly the same new code
in the “CONFIRM CODE” space as one in the
“NEW CODE” space. If they are different, the
“NEW CODE” space is cleared for redoing.
6 Press [SETUP] to exit the menu.
•
SETUP
NOTE
5 Press [SETUP] to exit the menu.
To change the rating, the TV must be turned
•
SETUP
to an unprotected program. If “PROTECT-
ED PROGRAM by ...” appears on the
screen, please change the channel to a station
that is not protected.
NOTE
Your personal access code will be erased and
•
will return to the default (0000) when a
power failure occurs or when you turn off the
power using a wall switch. If you have for-
gotten the code, unplug the power cord for 10
seconds to restore the access code to 0000.
B MPAA RATING SET UP
Follow steps to in the V-CHIP SET UP on page
1
3
16.
4 Press [K] or [L] to point to your desired item,
then press [ENTER] to select “BLOCK” or
“VIEW”.
MENU LANGUAGE
1 Press [SETUP] then press [K] or [L] to point
G
[VIEW]
to “LANGUAGE”.
PG
[VIEW]
PG–13
R
NC–17
X
[VIEW]
- TV SET UP -
B
[BLOCK]
[BLOCK]
[BLOCK]
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
B
ENTER
Selection
G
Rating Category Explanations
General Audience
PG
PG-13
R
Parental Guidance suggested.
Unsuitable for children under 13
Restricted; under 17 requires accompa-
nying parent or adult guardian
No one under 17 admitted
2 Press [ENTER] repeatedly to select
“ENGLISH”, “ESPAÑOL”= Spanish or
“FRANÇAIS”= French.
ENTER
NC-17
X
Mature audience only
3 Press [SETUP] to exit the menu.
When you select a rating and set it to “BLOCK”,
the higher ratings will be blocked automatically.
The lower ratings will be available for viewing.
When you set the lowest rating to “VIEW”, all other
ratings will automatically be available for viewing.
•
•
SETUP
NOTE
This function effects only the language on the
screen menu and not the audio source.
•
5 Press [SETUP] to exit the menu.
If for some reason the menu is in Spanish or
•
SETUP
French, press [SETUP], press [K] or [L] to
point to “IDIOMA [ESPAÑOL]” or “LAN-
GAGE [FRANÇAIS]”, then press [ENTER]
repeatedly to select desired language, then
press [SETUP].
CHANGE ACCESS CODE
C
Follow steps to in the V-CHIP SET UP on page
1
3
16.
4 Press the number buttons to enter your
desired access code in the “NEW CODE”
space, then enter the same code in the
“CONFIRM CODE” space. When completed,
the menu will return to “V-CHIP SET UP”.
NEW CODE
1
4
7
2
5
8
3
6
9
X X X X
CONFIRM CODE
_
_
_
_
0
- 17 -
EN
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD SECTION
ABOUT THE DISCS
PLAYABLE DISCS
Recorded
signals
Playable
discs
Disc size
Disc type
Title 1
Region code
Mark (logo)
DVD-Video
* 1,2,4,6,10,11
or
DVD-RW
DVD-R
* 1,3,4,5,
6,7,9,10
Example
Title 2
-
-
Digital video 5 inches
(MPEG2)
Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2
(12cm)
DVD+RW
DVD+R
* 1,3,4,5,
6,8,9,10
Audio CD
* 4,6,10
-
-
Digital audio
Audio CD
MP3
Example
Track 1 Track 2 Track 3 Track 4 Track 5 Track 6
5 inches
(12cm)
CD-RW
CD-R
* 4,5,6,9,10
Example
Digital audio
Group 1
Group 2
or
MP3
Track 1 Track 2 Track 3 Track 4 Track 5 Track 6
is a trademark of DVD Format/Logo Licensing Corporation.
If you cannot play back a disc which bears one of the marks above, check the following notes.
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.
*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.
*3: Discs recorded in the VR (Video Recording) format cannot be played back.
*4: Scratched or stained discs may not be played back.
*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the
recorder or special properties of discs.
*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not
play them back. Even if they are played back, the sound or video quality will be compromised.
*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD recorder. However, depend-
ing on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth,
etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder.
*8: Only the discs recorded in the video format and finalized can be played back.
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be
played back at all or normally (the picture or sound may not be smooth, etc.).
3
*9: If there is too much recording space left on a disc (the used portion is less than 2- / " (55mm) across), it may not play back properly.
16
*10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read it correctly.
*11: The number inside the symbol refers to a region of the world and a disc encoded in a specific region for-
mat can only be played back on unit with the same region code.
UNPLAYABLE DISCS
NEVER play back the following discs. Otherwise, the unit may result in malfunction.
•
DVD-RAM / CD-I / Photo CD / Video CD / DVD with region codes other than 1 or ALL /
DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers
Never insert a disc which is broken or whose form is abnormal (other than 5 inch (12cm) round disc).
•
On the following disc, the sound MAY NOT be heard.
•
Super Audio CD
NOTE
Only the sound recorded on the normal CD layer can be delivered.
The sound recorded on the high density Super Audio CD layer cannot be delivered.
Any other discs without compatibility indications
•
EN
–
–
18
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYING A DISC
POWER
SELECT
PICTURE
EJECT
NOTE
When the DVD mode has been switched to the
TV mode, the DVD mode shuts down first and
then the TV picture and sound appears in about
4 seconds. Similarly, when [POWER] is
pressed to turn off in the DVD mode, this mode
shuts down first and then the unit is turned off.
•
•
3
ZOOM
0
MUTE
SKIP
“
” may appear at the top-right on the TV
PLAY
STOP
SLOW
REV
FWD
screen during operation, warning that a pro-
hibited operation has been encountered by the
DVD or the disc.
DISC
MENU
PAUSE
With DVDs that use titles for playback pro-
gram signals, playback may start from the
second title or it may skip these titles.
During the playback of a two layered disc,
pictures may stop for a moment. This happens
when the 1st layer switches to the 2nd layer.
This is not a malfunction.
•
•
DISPLAY
SETUP
ENTER
TITLE
RETURN
Shaded buttons are used for following operation.
•
BASIC PLAYBACK
MP3 PLAYBACK
GETTING STARTED
1 In stop mode, press [DISC MENU], then press
[K] or [L] to select the desired group or track.
Turn on the power of amplifier and any other compo-
nents, if necessary.
folder name 1
folder name 2
folder name 3
DISC
MENU
folder name 4
1 Press [POWER] then the power will turn on.
file name 1
file name 2
file name 3
POWER
folder name 1
2 Open the disc door manually.
If a group is selected, press [B] or [ENTER] to go
•
on to the track selection screen. Press [s] to go
back to previous screen.(except for the top page.)
If a track is selected, press [ENTER] to start
•
playing tracks. Starting from the one you’ve just
chosen the subsequent tracks will be played.
If the entire file list cannot be displayed at once
•
3
Insert a disc with the label facing back of the unit to
start playing it. By simply placing the disc gently into
the slot, it will be loaded automatically.
on a screen, “n” appears to go to the next page.
Press [TITLE] to return to the top file of the
•
highest hierarchy in the program and file list.
2 Press [STOP C] to stop playback.
STOP
NOTE
Folders are known as Groups; files are known as Tracks.
•
3
Playback will start from the first chapter/track of the disc.
If the playback does not start automatically,
press [PLAY O].
When you playback a DVD which features a
title menu, it may appear on the screen. In this
case, refer to “TITLE MENU” on page 20.
•
MP3 files are accompanied by
Maximum of 255 folders can
be recognized.
icon.
•
•
•
Maximum of 999 files can be recognized.
Up to 8 hierarchies can be created.
•
•
•
This unit recommends the use of files recorded
at the below specifications:
4 Press [STOP C] to stop playback.
Sampling frequency: 44.1kHz or 48kHz
•
Constant bit rate: 32kbps ~ 320kbps
•
STOP
For MP3 file recorded in Variable Bit Rate (VBR),
•
the unit may not display the actual elapsed time.
A
5
Press [EJECT ] to remove the disc from the unit.
EJECT
EN
–
–
19
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC MENU
RESUME
1 Press [DISC MENU].
1 During playback, press [STOP C].
DISC
MENU
Resume ON
The DVD main menu will appear.
If the feature is not available,
appear on the TV screen.
•
•
STOP
Press ’PLAY’ to play from here.
To play the beginning,
press ’STOP’ first and then ’PLAY’.
symbol may
If disc menu is available on the disc, audio lan-
guage, subtitle options, chapters for the title and
other options will appear for selection.
•
(Example: DVD or Audio CD)
Resume message will appear on the TV screen.
2 Use [K], [L], [s] or [B] to select an item and
•
press [ENTER] to confirm selection.
2 Press [PLAY O], playback will resume from
the point at which playback was stopped.
ENTER
PLAY
To cancel resume, press [STOP C] twice.
•
For MP3, playback will resume from the begin-
•
TITLE MENU
ning of the current track.
The resume information stays on even when the
power is turned off.
•
1 Press [TITLE].
TITLE
PAUSE
The title menu will appear.
If the feature is not available,
appear on the TV screen.
•
symbol may
•
1 During playback, press [PAUSE F].
PAUSE
2 Use [K], [L], [s] or [B] to select an item
then press [ENTER] to confirm selection.
Playback will pause and sound will be muted.
•
ENTER
2 To continue playback, press [PLAY O].
PLAY
CALLING UP A MENU SCREEN
DURING PLAYBACK
STEP BY STEP PLAYBACK
Press [DISC MENU] to call up the DVD menu or
press [TITLE] to call up the title menu.
NOTE
1 During playback, press [PAUSE F].
Contents of menu and corresponding menu
operations may vary between discs. Refer to
the manual accompanying the disc for details.
•
PAUSE
Playback will pause and sound will be muted.
•
2 The disc goes forward by one frame each
time [PAUSE F] is pressed.
PAUSE
3
To exit step by step playback, press [PLAY O].
PLAY
EN
–
–
20
Download from Www.Somanuals.com. All Manuals Search And Download.
FAST FORWARD /
FAST REVERSE
ZOOM
The Zoom function allows you to enlarge the video
image and to pan through the enlarged image.
D
1 During playback, press [FWD
] or
E
[REV
].
1 Press [ZOOM] during playback.
REV
FWD
ZOOM
SLOW
Playback will continue.
•
D
E
“
1” or “
1” appears on the screen.
•
2 Press [ZOOM] repeatedly to select the
required zoom factor: ZOOM1, ZOOM2,
ZOOM3 or OFF.
2 To select another speed, repeat step 1 until
your required speed number appears on the
screen.
ZOOM
For DVDs, fast forward/reverse search speed is
•
different depending on the disc. Approximate
speed is 1 (×2), 2 (×8), 3 (×20), 4 (×50) and
5 (×100).
3 Press [K], [L], [s] or [B] to move the
zoomed picture across the screen.
For Audio CDs and MP3 approximate speed is
1 (×2), 2 (×8) and 3 (×30).
•
3
To return to normal playback, press [PLAY O].
PLAY
4 To exit zoom mode, press [ZOOM] to OFF.
ZOOM
SLOW FORWARD /
SLOW REVERSE
NOTE
Zooming function does not work while disc
menu is shown.
•
Zooming function is not available on some
discs.
It may take several seconds to slide the
zoomed picture.
•
1 During playback, press [PAUSE F].
PAUSE
•
The picture may be distorted if you operate
•
D
E
2 Press [FWD
] or [REV
].
other functions repeatedly (ex. [PAUSE F] or
E
[REV
], etc.) in the zoom mode.
REV
FWD
SLOW
“
1” or “
1” appears on the screen.
•
3 To select another speed, repeat step 2 until
your required speed number appears on the
screen.
Slow forward or reverse speed varies with the
disc. Approximate speed is 1 (1/16), 2 (1/8) and
3 (1/2).
•
4
To return to normal playback, press [PLAY O].
PLAY
EN
–
–
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SEARCH FUNCTION
2 Within 30 seconds, select the desired track
1
2
5
8
0
3
CH.
number using the Number buttons.
4
6
1
4
7
2
5
8
3
6
9
7
SLEEP
9
VOL.
+100
+10
ZOOM
0
MUTE
SKIP
To select single-digit track number, press [0]
first if the total number of track in the disc is 10
or more. (e.g. Press [0] [3] for track number 3.)
Playback will start at the selected track.
•
•
PLAY
STOP
SLOW
REV
FWD
DISC
MENU
PAUSE
Using [SKIP H / G
]
DISPLAY
SETUP
During playback, press [SKIP G] to move the next
track. Press it repeatedly to skip subsequent tracks.
Press [SKIP H] to go back to beginning of the cur-
rent track. Press it repeatedly to go to the previous
tracks.
ENTER
TITLE
RETURN
CLEAR SEARCH MODE REPEAT
A-B
If [SKIP H / G] is pressed while the play-
back is paused, the playback will be paused
again after skipping to the next track.
•
Shaded buttons are used for following operation.
•
NOTE
TRACK SEARCH
[SKIP H / G] are not operative when
playback is stopped.
•
There are three ways to begin playback on an Audio
CD and MP3 at a specific track.
TITLE / CHAPTER SEARCH
Using the number buttons
1 Press the Number buttons to enter the
desired track number.
1 Press [SEARCH MODE] once for the Chapter
search, twice for the Title search during play-
back.
1
4
7
2
5
8
3
6
9
+100
_/2
SEARCH MODE
0
+10
once
Playback will start at the selected track.
To select single-digit track number, press single
number. (e.g. Press [3] for track number 3.)
To select track numbers which are higher than 9,
press [+100/+10] first.
•
•
2 Within 30 seconds, enter the desired chapter/
title number using the Number buttons.
•
1
4
7
2
5
8
3
6
9
(e.g. Press [+100/+10] [2] [5] for track number
25.)
0
Using [SEARCH MODE]
Playback will start at the selected chapter or
title.
Press [CLEAR] to erase the incorrect input.
To select single-digit chapter/title number, press
[0] first if the total number of chapter/title in the
disc 10 or more. (e.g. Press [0] [2] for
chapter/title 2.)
•
1 Press [SEARCH MODE].
•
•
SEARCH MODE
The track search display appears.
•
EN
–
–
22
Download from Www.Somanuals.com. All Manuals Search And Download.
TIME SEARCH
MARKER SETUP SCREEN
Use markers to memorize your favorite places on a disc.
1 During playback, press [SEARCH MODE]
repeatedly to display the Time Search on the
TV screen.
1 Press [SEARCH MODE] repeatedly during
playback to display the Marker screen.
_:_ _:_ _ TOTAL 1:29:00
SEARCH MODE repeatedly
1
2
3
4
5
6
7
8
9
10 AC
SEARCH MODE
_ _
_
_:_ _:_ _
repeatedlly
2 Within 30 seconds, enter a desired disc time
2 Press [s] or [B] to select 1, 2, 3, 4, 5, 6, 7,
using the Number buttons.
8, 9, or 10 and ensure that “
:
:
”
- - - - - - - -
appears in the display.
1
4
7
2
5
8
3
6
9
0
3 When you reach the desired point, press
Playback will start at the specified time.
Press [CLEAR] to erase the incorrect input.
When there is no need to enter a number, “0”
appears automatically. For example,
•
•
•
[ENTER].
ENTER
“ 0 : 0
:
” appears in the Time Search display
- - -
The Title or Track and elapsed playing time will
appear in the TV screen.
•
if the total time of the track or title is less than
10 minutes.
4 To return to the Marker later, press [SEARCH
MODE] repeatedly during playback to display
the Marker screen. Then press [s] or [B] to
choose the desired marker, then press
[ENTER].
SEARCH MODE
ENTER
repeatedly
NOTE
Operations which erase all Markers:
•
– Turning off the power.
– Ejecting a disc from the unit.
– Pressing [SELECT].
–
Selecting “AC” at step 2 and pressing
[ENTER].
To clear a marker:
•
•
– Press [s] or [B] to select a cursor on to the
marker number and press [CLEAR].
You can mark up to 10 points.
5 Press [SEARCH MODE] or [RETURN] to exit.
SEARCH MODE
EN
–
–
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIAL PLAYBACK FUNCTION
PLAY
For MP3
REV
FWD
STOP
SLOW
1 Press [REPEAT] during playback.
DISC
MENU
PAUSE
REPEAT
DISPLAY
SETUP
ENTER
The repeat mode changes as described below
every time you press the button.
•
TITLE
RETURN
CLEAR SEARCH MODE REPEAT
A-B
TRACK
(current track
repeat)
GROUP
(current group
repeat)
ALL
(entire disc
repeat)
OFF
(repeat off)
MODE
AUDIO SUBTITLE ANGLE
Shaded buttons are used for following operation.
•
NOTE
Repeat Track/Group setting will be cleared
when moving to other track or group.
•
REPEAT
REPEAT is available only during playback.
For DVD-Vs
A-B REPEAT
1 To activate the repeat function, press
[REPEAT] during playback.
REPEAT
1 Press [A-B] at your chosen starting point.
A-B
The repeat mode changes as described below
every time you press the button.
•
“
A-” appears briefly on the TV screen.
•
CHAPTER
(current chapter repeat) (current title repeat)
TITLE
OFF
(repeat off)
2 Press [A-B] again at your chosen end point.
A-B
“
A-B” appears briefly on the TV screen, and
•
NOTE
the repeat sequence begins.
Repeat Title/Chapter is not available with
some scenes.
•
•
3 To exit the sequence, press [A-B].
A-B
Repeat setting will be cleared when moving
to other title or chapter.
NOTE
The A-B repeat section can only be set within
the current title (for DVDs) or current track
(for Audio CDs).
A-B repeat is not available with some scenes in DVD.
To cancel the A point which was set, press
[CLEAR].
•
For Audio CDs
1 To activate the repeat function, press
•
•
[REPEAT] during playback.
REPEAT
A-B repeat playback does not function during
title, chapter, track or all repeat playback.
•
The repeat mode changes as described below
every time you press the button.
•
TRACK
(current track repeat)
ALL
OFF
(repeat off)
(entire disc repeat)
NOTE
Repeat Track setting will be cleared when
moving to other track.
Repeat playback does not function during A-
B repeat playback.
•
•
EN
–
–
24
Download from Www.Somanuals.com. All Manuals Search And Download.
PROGRAM
RANDOM PLAYBACK
You may determine the order in which tracks will play. This function shuffles the playing order of tracks
instead of playback in the sequence.
1 In stop mode, press [MODE].
MODE
1 In stop mode, press [MODE] twice.
RANDOM
CD-DA
TOTAL 0:45:55
The “PROGRAM” screen will appear.
•
MODE
RANDOM PROGRAM
no indication
twice
-
-
-
-
2 Press [▲ ] or [▼] to select a track, then press
PLAY
[ENTER].
“RANDOM” screen appears.
•
TOTAL 1:03:30
1
5
3:30
5:10
10 4:20
11 3:00
12 3:20
17 4:10
22 2:50
2/3
2 Press [PLAY O] to start random playback.
ENTER
1/4
PLAY
NOTE
Press [CLEAR] to erase the most recently
entered track.
If the entire Program cannot be displayed at
once on a screen, “G” appears to go to the next
page and “H” appears to go back to the previ-
ous page.
•
•
If you like to repeat the current track in the ran-
dom selection, press [REPEAT] several times
until “
you like to repeat the entire random selection
press [REPEAT] several times until “
appears during playback.
•
TRACK” appears during playback. If
ALL”
While an MP3 folder is open:
Press [B] when you want to go to the next
•
hierarchy.
Press [s] when you want to go back to the
previous hierarchy.
•
3 Repeat step 2 until you have selected all the
tracks you want to play in the program.
4
Press [PLAY O] to play the programmed tracks.
PLAY
NOTE
While the program is being played back,
pressing [STOP C] works as follows.
Press [STOP C] once and then [PLAY O]
again, playback will restart from the point where
[STOP C] was pressed (MP3: from the begin-
ning of the current track). (Program continued)
•
•
Press [STOP C] twice and then [PLAY O]
again, playback will restart from the track in
the usual way. (Program canceled)
•
Up to 99 tracks can be entered.
To erase all tracks in the program at once, select
“ALL CLEAR” at the bottom of the list at step 2.
If you like to repeat the current track in the
•
•
•
program, press [REPEAT] several times until
“
TRACK” appears during playback. If you
like to repeat the entire program press
[REPEAT] several times until “
appears during playback.
ALL”
EN
–
–
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE SETTINGS
DISPLAY
ENTER
AUDIO LANGUAGE
SETUP
TITLE
RETURN
CLEAR SEARCH MODE REPEAT
A-B
MODE
AUDIO SUBTITLE ANGLE
The unit allows you to select a language during DVD
disc (if multi languages are available) playback.
Shaded buttons are used for following operation.
•
1 Press [AUDIO] during playback.
1.ENG Dolby D 3/2.1ch 48k/3
AUDIO
SUBTITLE LANGUAGE
2 Press [AUDIO] repeatedly to select your
The unit allows you to select a language for subtitles
during DVD disc (if available) playback.
desired language.
AUDIO
NOTE
1 Press [SUBTITLE] during playback.
Pressing [AUDIO] may not work on some
•
1.ENG/6
DVDs with multiple audio languages (e.g.
DVDs which allow audio language setting on
the disc menu).
SUBTITLE
The subtitle language will appear on the display
bar at the top of the TV screen.
•
2 Press [SUBTITLE] repeatedly to select your
desired subtitle language.
STEREO SOUND MODE
SUBTITLE
3 To turn off subtitles, press [SUBTITLE]
repeatedly until “OFF” appears.
SUBTITLE
1
Press [AUDIO] repeatedly during playback to
select between “STEREO”, “L-ch” or “R-ch”.
STEREO
AUDIO
NOTE
Pressing [SUBTITLE] may not work on
•
STEREO - both right and left channels are
active (stereo)
L-ch - only left channel is active
R-ch - only right channel is active
•
some DVDs with multiple subtitle languages.
In this case, set it on the disc menu.
(Operation varies between discs Refer to the
manual of the disc.)
If the desired language is not shown after
pressing [SUBTITLE] several times, the disc
does not have subtitles in that language.
•
When “NOT AVAILABLE” appears on the TV
screen, it means no subtitle is recorded on the
scene.
•
NOT AVAILABLE
If you choose a language that has a 3 letter
•
language code, the code will be displayed
every time you change the Subtitle language
setting. If you choose any other languages,
“---” will be displayed instead. (Refer to page
29.)
EN
–
–
26
Download from Www.Somanuals.com. All Manuals Search And Download.
CAMERA ANGLE
VIRTUAL SURROUND
Some DVD discs contain scenes which have been shot You can enjoy surround-sound effect over two speak-
simultaneously from various angles. You can change ers on this unit.
the camera angle when the “
screen.
” icon appears on the
1 Press [MODE] repeatedly during playback
then press [ENTER] to set it “1”, “2” or “OFF”.
1 Press [ANGLE] during playback.
OFF
MODE
twice
ENTER
1 / 8
ANGLE
1:
2:
Natural effect
The selected angle will be displayed on the dis-
play bar at the top of the screen.
•
Emphasized effect
OFF: Original Sound
If the “ANGLE ICON” setting is “OFF” in the
•
2 Press [MODE] to exit.
“OTHERS” menu, the “
” icon will not
MODE
appear. (Refer to page 31.)
2 Press [ANGLE] repeatedly to select your
You can also exit the menu by pressing
[RETURN].
•
desired angle.
ANGLE
NOTE
For CD play only:
Virtual Surround will not be effective if the
•
sound mode is set to something other than
STEREO. (Refer to “STEREO SOUND
MODE” on pge 26.)
BLACK LEVEL SETTING
Adjust the Black Level Settings to make the black
parts of the picture brighter.
1 Press [MODE] during playback then press
[ENTER] to switch “ON” or “OFF”.
OFF
MODE
ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.
(Initial setting)
2 Press [MODE] twice or [RETURN] to exit.
MODE
RETURN
twice OR
NOTE
The setting will be saved even if the unit is
turned off.
•
EN
–
–
27
Download from Www.Somanuals.com. All Manuals Search And Download.
THE ON-SCREEN INFORMATION
2 Press [DISPLAY] again to show current Total
DISPLAY
ENTER
Track.
SETUP
TITLE
RETURN
ALL:
Current track number / Total tracks
4/12 0:13:45 - 0:45:40
T
Shaded buttons are used for following operation.
•
Current repeat setting appears only
when the repeat setting is active
T: Track repeat
A: All Tracks repeat
You can check the information about the current disc
A
B: A-B repeat
by pressing [DISPLAY].
Remaining time of the entire disc
Elapsed time of the entire disc
For DVD-Vs
3 Press [DISPLAY] again to exit.
1 Press [DISPLAY] during playback to show
current Chapter.
Angle icon, appears only when avail-
able on the DVD
NOTE
Current playback status
11/16 0:00:00 - 0:03:30
When you are playing a disc in PROGRAM
or RANDOM mode, “ PROGRAM” (or
RANDOM) will be displayed at step 2.
•
Remaining time of the current chapter
Elapsed time of the current chapter
CH(Chapter):
Current chapter number / Total chapters
2
Press [DISPLAY] again to show current Title.
For MP3
1/3 0:00:00 - 1:23:45
1 Press [DISPLAY] during playback.
Remaining time of the current title
Current playback status
Elapsed time of the current title
3
TRACK 01
TT(Title):
Current title number / Total titles
The name of the file currently in play
will be displayed.
3 Press [DISPLAY] again.
2 Press [DISPLAY] again.
T
L1
TR(Track):
Layer numbers, appears only when
playing a two-layered Disc
L0: Layer 0 is playing
Current track number / Total tracks
1/36 0:01:15
T
Current repeat setting, if active
T: Track repeat
L1: Layer 1 is playing
G: Group (folder) repeat
A: Disc repeat
Current repeat setting appears only
when the repeat setting is active
C: Chapter repeat / T: Title repeat /
Elapsed playing time of the current
track
A
B: A-B repeat
BIT RATE: The amount of audio and
video data currently being read
3 Press [DISPLAY] again to show the current-
playback mode.
4 Press [DISPLAY] again to exit.
(Only when you are playing a disc in PROGRAM or
RANDOM mode.)
PROGRAM
RANDOM
or
4 Press [DISPLAY] again to exit.
For Audio CDs
1 Press [DISPLAY] during playback to show the
current Track.
Current playback status
4/12 0:03:21 - 0:02:15
T
Remaining time of the current track
Elapsed time of the current track
TR(Track):
Current track number / Total tracks
EN
–
–
28
Download from Www.Somanuals.com. All Manuals Search And Download.
CHANGING THE DVD SET UP ITEMS
MENU
PAUSE
D
LANGUAGE SETTING
DISPLAY
ENTER
Follow steps to in the
CUSTOM MENU
.
1
2
SETUP
TITLE
RETURN
3 Press [K] or [L] to select the desired item
CLEAR
A-B
then press [ENTER].
Shaded buttons are used for following operation.
•
SETUP
LANGUAGE
AUDIO
ORIGINAL
SUBTITLE
DISC MENU
OFF
ENGLISH
ENTER
CUSTOM MENU
You can change the DVD player’s settings.
AUDIO: Sets the audio language.
SUBTITLE: Sets the subtitle language
DISC MENU: Sets the language for DVD menu.
1 In stop mode, press [SETUP] twice, [L] to
select “CUSTOM” then press [ENTER].
4 Press [K] or [L] to select a setting then press
SETUP
[ENTER].
twice
SETUP
AUDIO
ORIGINAL
ENGLISH
FRENCH
LANGUAGE
LANGUAGE
LANGUAGE
SETUP
QUICK
CUSTOM
INITIALIZE
ENTER
ENTER
SETUP
SUBTITLE
OFF
ENGLISH
FRENCH
NOTE
If the menu does not appear, press [PLAY O]
•
first, then press [STOP C]. Make sure the
disc is in stop mode, then slowly press
[SETUP] twice.
SETUP
DISC MENU
ENGLISH
FRENCH
SPANISH
2 Press [K] or [L] to select the desired item
If “OTHER” is selected on the “AUDIO”, “SUB-
TITLE” or “DISC MENU” screen, press four-
digit number to enter the code for the desired
language.
•
•
then press [ENTER] to confirm.
SETUP
CUSTOM
LANGUAGE
DISPLAY
AUDIO
ENTER
Only the languages supported by the disc can be
selected.
PARENTAL
OTHERS
5 Press [SETUP] to exit the menu.
Refer to the pages below to set up each item.
SETUP
D
E
F
LANGUAGE: See
LANGUAGE SETTING
DISPLAY:
See
See
DISPLAY SETTING
AUDIO SETTINGS
PARENTAL CONTROL
OTHER SETTINGS
AUDIO:
NOTE
G
H
PARENTAL: See
OTHERS: See
Language Setting for Audio and Subtitle are
•
not valid for some discs due to default setting
of the disc. In this case, set them by pressing
[AUDIO] and [SUBTITLE]. (Refer to page
26.)
If you select a language that is not supported
•
by the disc, subtitle will automatically be set
OFF and the first item of the audio languages
will be automatically set.
EN
–
–
29
Download from Www.Somanuals.com. All Manuals Search And Download.
E
F
DISPLAY SETTING
AUDIO SETTING
Choose the appropriate Audio settings for your equip-
ment as it only affects during the playback of DVD
discs.
Follow steps to in the on
CUSTOM MENU
page 29.
1
2
3 Press [K] or [L] to select the below items then
Follow steps to in the on
CUSTOM MENU
1
2
press [ENTER].
page 29.
SETUP
DISPLAY
3 Press [K] or [L] to select the below items then
TV MODE
STILL MODE
4:3 LETTER BOX
AUTO
ENTER
press [ENTER].
SETUP
AUDIO
DRC
ON
DOWN SAMPLING
DOLBY DIGITAL
ON
BITSTREAM
ENTER
TV MODE:
QUICK
You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.
DRC (Dynamic Range Control):
SETUP
AUDIO
SETUP
DISPLAY
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
BITSTREAM
TV MODE
STILL MODE
4:3 LETTER BOX
AUTO
To compress the range of soft to loud sound.
The default setting is “ON”.
•
4:3 LETTER BOX (default): To show black bars
on top and bottom of the screen.
•
•
•
4:3 PAN & SCAN: To show a full height picture
with both sides trimmed.
DOWN SAMPLING:
SETUP
AUDIO
DRC
DOWN SAMPLING
DOLBY DIGITAL
ON
ON
BITSTREAM
STILL MODE
This function allows you to adjust picture resolu-
tion and quality in the still mode.
:
ON : Output in 48 kHz. (default)
OFF : Output the original sound.
When playing disc with copyright Protection
If you select “OFF”, copyright protection will be
activated and sound will be down sampled at
48kHz.
•
SETUP
DISPLAY
•
TV MODE
STILL MODE
4:3 LETTER BOX
AUTO
•
AUTO (default): Automatically select the best
resolution setting (FRAME or FIELD) based on
the data characteristics of the pictures.
FIELD: Select “FIELD” when the pictures are
still unstable even if “AUTO” is selected.
FIELD stabilizes the pictures, although the pic-
ture quality may become coarse due to the limit-
ed amount of data.
FRAME: Select “FRAME” to display relatively
motionless pictures in higher resolution.
FRAME improves the picture quality, although it
may unstabilizethe pictures due to simultaneous
output of two field data.
•
•
DOLBY DIGITAL:
Set to “BITSTREAM” when the unit is connected
QUICK
to a Dolby Digital Decoder.
SETUP
AUDIO
DRC
ON
DOWN SAMPLING
DOLBY DIGITAL
ON
BITSTREAM
•
BITSTREAM: Output a Dolby Digital signal
(default)
PCM: Convert the Dolby Digital to PCM
(2 channel stereo)
•
•
4 Press [SETUP] to exit the menu.
SETUP
4 Press [SETUP] to exit the menu.
SETUP
QUICK MENU
You can select the “TV MODE” or “DOLBY DIGITAL” from the QUICK menu quickly. To access the
•
QUICK menu, select “QUICK” instead of “CUSTOM” at step on page 29.
1
TV SET UP MENU IN DVD MODE
You can access the TV SETUP menu by pressing [SETUP] from the DVD mode, and select only
“LANGUAGE” and “BACK LIGHT”.
•
EN
–
–
30
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROL LEVELS
G
PARENTAL CONTROL
ALL
•
Parental Control limits the disc viewing that exceed
your setting (with a password or playback will stop).
This feature allows you to prevent discs with alterna-
tive scenes from being played by your children.
All parental lock is cancelled.
Level 8
•
DVD software of any grade (adult/general/children)
can be played back.
Levels 7 to 2
Only DVD software intended for general use and
children can be played back.
•
PARENTAL LEVEL
Parental Level allows you to set the rating level of
your DVD discs. Playback will stop if the disc’s rat-
ings exceed the level you set.
Level 1
•
Only DVD software intended for children can be
played back, with those intended for adult and gen-
eral use prohibited.
Follow steps to in the
CUSTOM MENU
on
1
2
page 29.
3 Enter your four-digit password then press
H
OTHER SETTINGS
[ENTER].
Follow steps to in the on
CUSTOM MENU
1
4
7
2
5
8
3
6
9
1
2
SETUP
PARENTAL
PASSWORD
Enter current password.
page 29.
ENTER
3 Press [K] or [L] to select the below items then
0
press [ENTER].
Press [4], [7], [3], [7] then enter your password
if you forget the password.
•
SETUP
OTHERS
ANGLE ICON
SCREEN SAVER
ON
OFF
ENTER
4 Press [K] or [L] to select “PARENTAL LEVEL”
then press [ENTER].
ANGLE ICON:
SETUP
PARENTAL
Press [ENTER] repeatedly to turn Angle icon
“ON” or “OFF”.
•
PARENTAL LEVEL
PASSWORD CHANGE
ALL
ENTER
The default setting is “ON”.
SCREEN SAVER:
•
5 Press [K] or [L] to select the desired level
Press [ENTER] repeatedly to turn Screen Saver
•
then press [ENTER].
“ON” or “OFF”.
SETUP
PARENTAL
The default setting is “OFF”. If you select “ON”,
the screen saver program starts when there is no
input from the unit for 5 minutes in stop mode.
•
PARENTAL LEVEL
ALL
ENTER
8
7 [NC-17]
6 [R]
4 Press [SETUP] to exit the menu.
6 Press [SETUP] to exit the menu.
SETUP
SETUP
NOTE
When doing this for the first time, enter any 4
digits. (except for 4737) That number will be
used as the password. (in the event you forget
the password, see below)
To change the password, press [K] or [L] to
select “PASSWORD CHANGE” at step 4
then press [ENTER]. Enter the four-digit
password, then press [ENTER].
With some DVDs, it may be difficult to find
if they are compatible with parental lock. Be
sure to check if the parental lock function
operates in the way that you have set.
Record the password in case you forget it.
•
•
•
•
EN
–
–
31
Download from Www.Somanuals.com. All Manuals Search And Download.
MENU
PAUSE
DISPLAY
ENTER
SETUP
TITLE
RETURN
Shaded buttons are used for following operation.
•
INITIALIZE
This allows you to return all selections of SETUP
(except for “PARENTAL” and menu language) to
their default settings.
1 Press [SETUP] twice in stop mode so that the
“INITIALIZE” menu appears.
SETUP
2 Press [K] or [L] to select “INITIALIZE” then
press [ENTER].
SETUP
QUICK
CUSTOM
ENTER
INITIALIZE
3 Press [K] or [L] to select “YES” then press
[ENTER] twice.
SETUP
INITIALIZE
Initialize?
NO
YES
ENTER
twice
All the settings (except for “PARENTAL” and
menu language) will be cleared.
To cancel the initialization, select “NO”.
•
4 Press [SETUP] to exit the menu.
SETUP
EN
–
–
32
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit, con-
sulting the following checklist.
PROBLEM
CORRECTIVE ACTION
Make sure the power plug is connected to an AC outlet.
Make sure the power is turned on.
Aim the remote control directly at the sensor on the front of the unit.
Reduce the distance to the unit. You have to be within 23 feet.
Replace the batteries in the remote control.
Re-insert the batteries with their polarities (+/- signs) as indicated.
Tune your radio to an empty AM station so that you hear a lot of
noises. Then, turn the volume up. If you hear some signal sound from
the radio when pressing buttons on the remote control, the remote con-
trol is working.
No power
•
•
•
•
•
•
•
The unit does not respond to the
remote control
Check if the correct mode is selected. If not switch the mode by
pressing [SELECT], whichever you need.
•
TV Mode
Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked
possibilities. Before arranging for service, check these items. It could save your time and money.
PROBLEM
No picture or sound
CORRECTIVE ACTION
Make sure the AC cord is connected to an AC outlet.
Check antenna connection.
Press [SELECT] to select TV mode.
Then try other TV feature.
•
•
•
Let the unit program its tuner memory.
Adjust direction or replace antenna.
Adjust picture controls.
Check for broken pin of the antenna cable.
Adjust volume control on remote control or main unit.
Press [MUTE] to restore sound.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
No picture or poor picture on the
unit
No sound or poor sound
Bars On Screen
If outside antenna is being used, check for broken wire.
Check for local interference.
Picture Distorted or Blurred
Try a new channel, if OK, then possible station trouble.
If outside antenna is being used, check for broken wire.
Try a new channel, if OK, then possible station trouble.
If outside antenna is being used, check for broken wire.
Check for local interference.
Try a new channel, if OK, then possible station trouble.
Is antenna connected to jack on the back of the set?
If outside antenna is being used, check for broken wire.
Adjust “COLOR” control.
Try a new channel, if OK, then possible station trouble.
Is antenna connected to jack on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Try a new channel, if OK, then possible station trouble.
Is antenna connected to jack on the back of the set?
If outside antenna is being used, check for broken wire.
Adjust “CONTRAST” & “BRIGHT” control.
Picture Rolls Vertically
Lines or Streaks in Picture
No Color
Poor Reception on Some Channels
Ghosts in Picture
Weak Picture
EN
–
–
33
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEM
Sound OK, Picture Poor
CORRECTIVE ACTION
Try a new channel, if OK, then possible station trouble.
Is antenna connected to jack on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Adjust “CONTRAST” & “BRIGHT” control.
Try a new channel, if OK, then possible station trouble.
Check for local interference.
•
•
•
•
•
Picture OK, Sound Poor
•
•
No operation by infrared Remote
Control
Different color marks on screen
Make sure the AC cord is connected to an AC outlet.
Check batteries in remote control.
•
•
Magnetism from nearby appliances and geomagnetism might affect
the color of the TV picture. Move the unit away from the appliances,
the unit can repair itself automatically. If you want to repair immedi-
ately, unplug the power cord, then plug it in again 30 minutes later or
so. This automatically resets the unit.
•
CLOSED CAPTION PROBLEM
POSSIBLE REMEDY
Misspelling in captions
• Error committed by the closed captioning production company.
• Possible in a live broadcast. Not in case of a prerecorded program.
• A few seconds of delay is common for live broadcast.
• Display capacity may not exceed 220 words per minute. If a dialogue
• exceeds that rate, selective editing is used to insure that the captions
• remain up-to-date with the current TV screen dialogue.
Text is not shown in its entirety or
a delay occurs from what is being
said.
Captions scrambled with white
boxes
• Caused by interferences of building, power lines, thunderstorms, etc.
No captions in a program which
must contain closed caption
• The broadcast may use a time compression process to speed up the
• program. The decoder cannot read the compressed information and
• captions will be lost.
Black box in the TV screen
• You are in TEXT mode. Select a CAPTION mode (“C1”, “C2”) or
• Caption “OFF”.
EN
–
–
34
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Mode
PROBLEM
CORRECTIVE ACTION
• Insert a correct video disc that plays on this unit.
• Press [SELECT] to select DVD mode, then try other DVD feature.
• Insert the disc.
No picture
Disc cannot be played
• Clean the disc.
• Place the disc correctly, with the label side up.
• Cancel the parental lock or change the control level.
• Connect the audio cables firmly.
No sound
• Turn the power of the audio component on.
• Correct the audio output settings.
• Correct the input settings on the audio component.
• This unit does not support DTS audio. This is not a malfunction.
• There are some cases where pictures may be slightly distorted, which
are not a sign of a malfunction.
No DTS audio is output
Distorted picture
• Although pictures may stop for a moment, this is not a malfunction.
• The selected language is not available for audio or subtitles on the
DVD. (This is not a malfunction.)
Audio or subtitle language
does not match the set up
The camera angle cannot be changed • The DVD does not contain sequences recorded from different camera
angles. (This is not a malfunction.)
Audio or subtitle language cannot be • The DVD does not contain audio source or subtitles in the selected
changed
language. (This is not a malfunction.)
“Prohibited icon” appears on the
screen, prohibiting an operation
CD sound dropout
• That operation is prohibited by the unit or the disc.
(This is not a malfunction.)
• Scratched disc. Replace the disc with an unscratched one.
No CD reproduction
DVD picture dropout
DVD picture freeze
DVD picture in mosaic
No DVD reproduction
Disc cannot be inserted
Disc cannot be taken out
• Check if any disc is already in.
• Unplug and plug again the power cord to the outlet, and then press
A
[EJECT ].
N
• Press and hold [EJECT ] on the unit for more than 5 seconds.
NOTE
Some functions are not available in specific modes, but this is not a malfunction. Read the description in
this Owner’s Manual for details on correct operations.
•
•
Playback from a desired track and random playback are not available during program playback.
EN
–
–
35
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
CABINET CLEANING
DISC HANDLING
Wipe the front panel and other exterior surfaces of
the unit with a soft cloth immersed in lukewarm
water and wrung dry.
•
Handle the discs so that fingerprints and dust do
not adhere to the surfaces of the discs.
•
•
Never use a solvent or alcohol. Do not spray insec-
•
ticide liquid near the unit. Such chemicals may
cause damage and discoloration to the exposed sur-
faces.
SERVICING
Always store the disc in its protective case when it
is not used.
Should your unit become inoperative, do not try to
•
correct the problem by yourself. There are no user-
serviceable parts inside. Turn off, unplug the power
cord and please call our help line mentioned on
the front page, to locate an Authorized Service
Center.
IF THE LASER OPTICAL PICKUP UNIT
IS DIRTY
To clean-off, use a soft cloth.
•
•
•
•
•
If the unit still does not perform properly when it is
Do not use a hard cloth since this will mar the disc.
Wipe the disc in a straight line from center to edge.
Never wipe with a circular motion.
•
operated, while referring to the relevant sections
and to “TROUBLESHOOTING GUIDE” in this
Owner’s Manual, the laser optical pickup unit may
be dirty. Consult your dealer or an Authorized
Service Center for inspection and cleaning of the
laser optical pickup unit.
Do not use detergent or abrasive cleaning agents.
EN
–
–
36
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
GENERAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
Sound output:
2 speakers, 1W, 8 ohm
TV
LCD :
Television system :
Closed caption system :§15.119/FCC
Channel coverage:
20 inch
NTSC-M
OTHER SPECIFICATIONS
Terminals
Antenna input:
VHF/UHF/CATV
75 ohm unbalanced (F-type)
Mini DIN 4-pin jack
RCA connector [ 1
VHF:
UHF:
CATV:
2 ~ 13
14 ~ 69
S-Video input:
Video input:
Audio L/R input:
2 ~13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
181 channel
frequency synthesized
tuning system
Direct access keyboard,
programmable
scan and up/down
RCA connector [ 4
Component video input:
One pin jack (Y), 1Vpp (75 ohm)
Two pin jacks (Pr)/(Pb), 700mVpp (75 ohm)
Coaxial digital audio output:
Tuning System:
Channel access:
One pin jack, 500mmVpp (75 ohm)
Headphone:
Remote control:
1/8" stereo (3.5mm)
Digital encoded
infrared light system
Operating
temperature:
5°C to 40°C
DVD
(41°F~104°F)
Product type:
Discs:
DVD Player
DVD video, Audio CD
CD with MP3 files
Power requirements: AC 120V, 60Hz
Power consumption
(Maximum):
LCD:
65W
20"
Dimensions:
H :20-1/16"(510mm)
W:19-1/2" (495mm)
D :14-7/16"(366mm)
16.3 lbs. (7.4kg)
Weight:
Designs and specifications are subject to change without notice.
If there is a discrepancy between languages, the default language will be English.
•
•
EN
–
–
37
Download from Www.Somanuals.com. All Manuals Search And Download.
INDICE
■ INDICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 38
PARA INSERTAR LAS PILAS . . . . . . . . . . . . . . . . . . . . 39
■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 40
CONEXIONES DE ANTENA/CABLE . . . . . . . . . . . . . . 40
CONEXIÓN EXTERNA . . . . . . . . . . . . . . . . . . . . . . . . . 41
SECCIÓN DE DVD
■ REPRODUCCIÓN DE UN DISCO . . . . . . . . . . . . . . . . 44
REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . . . . . . 44
MENÚ DE DISCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
REANUDACIÓN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
SECCIÓN DE TV
■ OPERACIÓN DE TV Y AJUSTES. . . . . . . . . . . . . . . . . 42
PARA MIRAR UN PROGRAMA DE TV . . . . . . . . . . . . 42
AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
IDIOMA DE MENÚ . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
CONTROLES DE OPERACIÓN Y FUNCIONES
NOTE
A
Para elegir el modo de DVD presione primero [PLAY O] o [EJECT ], o introduzca un disco en la
ranura. De otra manera, el DVD no funcionará.
•
- MANDO A DISTANCIA
• Para saber cómo funciona el mando a distancia, consulte la [Fig.1] de la página 8.
1.Botón POWER
11. Botón CLEAR
Presione para encender y apagar la unidad.
Presione para cancelar o borrar un ajuste intro-
ducido actualmente.
2.Botón PICTURE
Presione para ajustar la imagen.
3.Botones numéricos
Presione para seleccionar directamente el número
de canal deseado .
Botón +100 (para modo TV)
Presione para seleccionar canales cuyo número
sea superior a 99.
Botón +10 (para modo DVD)
Presione para introducir los números superiores a
9 deseados.
Presione para borrar la pantalla “DISCO ADEN-
TRO”.
12. Botón MODE
Presione para visualizar la pantalla de la repro-
ducción programada o la de reproducción aleato-
ria en el modo de parada.
Presione para visualizar la pantalla de ajuste del
nivel del negro o la pantalla de sonido envolvente
durante la reproducción.
13. Botón SEARCH MODE
Presione para localizar un punto deseado.
4.Botón SLEEP
Presione para ajustar el temporizador de reposo
14. Botón AUDIO
Para modo TV: Presione para seleccionar el
modo de sonido de TV (ESTEREO/SAP/MONO).
Para modo DVD: Presione para seleccionar un
idioma de audio deseado (si está disponible).
5.Botones SKIP H /
G
Presione una vez para omitir capítulos o pistas y
desplazarse a un punto específico.
6.Botón PLAY
O
15. Botón EJECT
A
Presione para reproducir el disco.
Presione para extraer un disco de la unidad.
7.Botón PAUSE
F
16. Botón SELECT
Presione para hacer una pausa en la reproducción
del disco actual.
Presione para seleccionar el modo TV, modo de
entrada externa o modo de DVD.
8.Botón DISPLAY
Para modo TV
K
L
17. Botones CH.
/
:
Presione para seleccionar canales memorizados.
Presione para visualizar el número actual de canal en
la pantalla del televisor.
X
Y
18. Botones VOL.
/
Para modo DVD
:
Presione para controlar el nivel de volumen del
DVD y el televisor.
Presione para visualizar el estado actual en la pan-
talla del televisor.
19. Botón MUTE
9.Botón SETUP
Presione para entrar o salir del menú de configu-
ración del TV/DVD.
Presione para silenciar el sonido. Presiónelo de
nuevo para restablecer el sonido.
20. Botón ZOOM
10. Botón TITLE
Presione para ampliar la parte de la imagen repro-
ducida en un DVD.
Presione para visualizar el menú de títulos.
- 38 -
ES
Download from Www.Somanuals.com. All Manuals Search And Download.
26. Botón RETURN
E
21. Botón REV
Presione para volver a la pantalla anterior en el
menú de configuración.
Presione para ver la imagen en DVD en retroceso
o en cámara lenta de retroceso.
27. Botón A-B
D
Botón FWD
Presione para repetir la reproducción de una sec-
ción seleccionada.
Presione para mover en avance rápido o en
cámara lenta en el disco.
28. Botón ANGLE
22. Botón STOP
C
Presione para cambiar el ángulo de la cámara y
ver la secuencia que se está reproduciendo desde
un ángulo diferente (si existe).
Presione para detener la reproducción del disco.
23. Botón DISC MENU
– Muestra el menú del DVD.
29. Botón REPEAT
– Muestra la lista de archivos del disco MP3.
Repite la reproducción del disco, título, capítulo,
grupo o pista actual.
24. Botón ENTER
Presione para establecer un ajuste.
30. Botón SUBTITLE
25. Botones
K
(Arriba) /
L
(Abajo) /{ (Izquierda) /
Presione para seleccionar el idioma de los subtí-
tulos.
B
(Derecha)
Presione para seleccionar o ajustar los ítems del
menú.
- PANEL FRONTAL
• Para ver la ilustración del panel frontal, vaya a la página 9, [Fig. 2].
35. Botón SELECT
31. Botón STOP
P
Presione para seleccionar el modo TV, modo de
entrada externa o modo de DVD.
Presione para detener la reproducción del disco.
32. Botón MENU
36. Botón POWER
Presione para entrar o salir del menú de configu-
ración del TV/DVD.
Presione para encender y apagar la unidad.
N
X
Y
37. Botón EJECT
33. Botones VOLUME
/
Presione para extraer un disco de la unidad.
38. Ventana de sensor remoto
Presione para controlar el nivel de volumen del
DVD y el televisor.
X
Y
34. Botones CHANNEL
/
39. Botón PLAY
O
Presione para seleccionar canales memorizados.
Presione para reproducir el disco.
PARA INSERTAR LAS PILAS
PRECAUCIONES A LA HORA DE
INSERTAR LAS PILAS
1 Abra la cubierta del compartimiento de las
pilas empujando la cubierta del mando a dis-
tancia en el sentido de la flecha.
Asegúrese de seguir la polaridad correcta, tal como
•
se indica en el compartimiento de las pilas. Si se
colocan las pilas con la polaridad invertida se
pueden ocasionar daños a la unidad.
2 Inserte 2 pilas “AA” en el compartimiento de
las pilas, en el sentido indicado por las mar-
cas de polaridad (+/-).
No mezcle distintos tipos de pilas (ej. alcalina y de
carbón-zinc) o pilas viejas con nuevas.
•
3 Vuelva a poner la cubierta.
Si no va a usarse la unidad durante un período
•
largo de tiempo, quite las pilas para prevenir daños
o lesiones ocasionadas por posibles fugas de las
pilas.
No intente recargar las pilas que no sean para
recargar; pueden sobrecalentarse y estropearse.
•
NOTA
No se recomienda el uso de mandos a distancia universales. No todas las funciones pueden controlarse
con un mando a distancia universal.
•
Si decide usar un mando a distancia universal con esta unidad, sea consciente de que el número de código
suministrado puede no adecuarse a la unidad. En este caso, llame al fabricante del mando a distancia uni-
versal.
- 39 -
ES
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARACIÓN PARA LA UTILIZACIÓN
CONEXIONES DE ANTENA/CABLE
NOTA
Los cables utilizados aquí están disponibles en los comercios.
Para su seguridad y para evitar daños a la unidad, desconecte el cable de antena de la toma ANT.
antes de trasladar la unidad.
•
•
- CONEXIONES DE ANTENA/CABLE (CON O SIN CAJA)
[Parte posterior de este unidad]
Señal del
TV cable
Antena
o
ITAL
DIG
AUDIXOIAOU)T
(COA
L
2
O
E
ID
V
R
IO
D
U
A
L
T
N
E
N
Y
O
P
M
P
C
Cable de entrada de la antena del hogar
/ empresa de cable (sin caja de cable)
b
P
r
P
R
IO
D
U
A
L
1
O
E
ID
V
VIDEO
S-VIDEO
NT
A
Caja de Cable o
Caja de Satélite *
O
NE
HO
P
AD
HE
OUT
IN
(SALIDA)
(ENTRADA)
ANT
Cable de entrada de la empresa de cable
o antena de satélite
*Algunos sistemas de TV por cable utilizan señales codifi-
cadas y requieren un convertidor especial para recibir
estos canales. Consulte con su empresa de cable local.
SI TIENE UNA TOMA DE PARED
Conecte el televisor a la toma de antena de pared con
el cable RF (disponible en los comercios).
CUANDO SE USA UNA CAJA DE CON-
VERTIDOR/CAJA DE SATÉLITE
Si su compañía de televisión por cable le suministra
una caja de convertidor o si usa un sistema de
satélite, podrá utilizar la conexión básica que se
muestra anteriormente.
SI TIENE CABLE DE HILOS
Conecte el televisor al cable de antena.
La selección de los canales deberá hacerse con la
caja de convertidor o caja de satélite. Esto significa
que no es posible cambiar de canal utilizando el
mando a distancia de la unidad.
NOTA
Patilla torcida
Antes de conectar la antena en la toma ANT. de la unidad, compruebe que la
patilla no esté torcida. Si lo está, ponga la patilla recta tal como se muestra en la
ilustración y a continuación conecte la patilla a la toma ANT. de la unidad.
•
Cable
Conector
(Debe ponerse recta) (patilla recta)
Para el instalador de sistemas CATV:
Esta nota tiene la finalidad de llamar la atención del instalador de sistemas CATV para que tenga en cuenta el
Artículo 820-40 de la NEC, que proporciona recomendaciones para hacer una conexión a tierra apropiada y, en par-
ticular, especifica que la tierra del cable debe conectarse al sistema de puesta a tierra del edificio, tan cerca del punto
de entrada del cable como sea posible.
•
- 40 -
ES
Download from Www.Somanuals.com. All Manuals Search And Download.
CONEXIÓN EXTERNA
Puede conectar esta unidad a su equipo de audio/vídeo.
[Parte posterior
de este unidad]
Asegúrese de apagar todos los componentes del
sistema antes de conectar otro componente.
Consulte los manuales de instrucciones de los
componentes que va a conectar a la unidad.
NOTA
•
•
L
O
IA
T
)
U
ITA
L
DIG IO
D
OA
(C
X
AU
AUDIO
R
L
VIDEO2
IO
P
UD
A
T
N
E
N
Y
O
M
P
C
Pb
Pr
VIDEO2
VIDEO1
Cuando utilice las tomas de entrada externa selec-
cione el “AUX1” o “AUX2” presionando [INPUT
SELECT]. (Consulte la página 42.)
R
L
AUDIO
IDEO
V
IDEO1
V
O
E
ID
-V
S
ANT
NE
HO
P
AD
HE
Para utilizar la tomas VIDEO1, seleccione
“AUX1”.
•
Para utilizar la tomas VIDEO1, seleccione
“AUX2”.
•
Use esta conexión si su propio equipo A/V (ej.
videograbadora) tiene tomas de salida de audio y
vídeo. Cuando se usa un cable Vídeo-S, se obtiene
una imagen mejor.
- ENTRADA DE VÍDEO1
(ENTRADA)
(SALIDA)
ej.
Cable de audio
R
AUDIO
L
Cable de vídeo
O
VIDEO1
EO
VID
Videograbadora
S-VIDEO
Cable VIDEO-S
NOTA
Si su propio equipo es monofónico (sólo tiene una toma de audio), conecte el cable de audio a la toma AUDIO L de esta unidad.
Si conecta la toma VIDEO y la toma S-VIDEO simultáneamente, se da prioridad a la S-VIDEO. .
•
•
Use esta conexión si el equipo A/V (ej. videocámara
o videojuego) tiene tomas de salida de vídeo COM-
PONENTE (Y,Pb,Pr). Podrá disfrutar de una mejor
imagen con esta conexión.
ej.
- ENTRADA DE VÍDEO2
VIDEO2
Cable de audio
R
AUDIO
L
(ENTRADA)
(SALIDA)
(SALIDA)
COMPONENT
Y
Cable de vídeo
componente
Pb
Pr
(ENTRADA)
Videojuego
Podrá disfrutar de un sonido de DVD con
más presencia desconectando el equipo de
audio digital, tal como el descodificador
Dolby Digital.
- SALIDA DE AUDIO
A toma de ENTRADA
DIGITAL COAXIAL DE AUDIO
Equipo doméstico de audio
Descodificador Dolby Digital
DIGITAL
AUDIO OUT
(COAXIAL)
(SALIDA)
NOTA
La fuente de audio de un disco en un formato de sonido envolvente Dolby Digital de 5,1 canales no se
•
•
•
puede grabar como sonido digital mediante una pletina MD o DAT.
Si conecta un descodificador Dolby Digital, ajuste la función “DOLBY DIGITAL” a “BITSTREAM”
para salida de audio en el modo de configuración. (Consulte la página 30).
A menos que se haga la conexión a un decodificador “DOLBY DIGITAL” a “PCM” para salida de audio
en el modo de configuración.
La reproducción en una unidad utilizando ajustes incorrectos puede generar ruido y distorsión, y también
puede provocar daños a los altavoces. (Consulte la página 30).
Fabricado bajo licencia de Dolby Laboratories. “Dolby” y el símbolo de la doble D son marcas comerciales de
Dolby Laboratories.
- 41 -
ES
Download from Www.Somanuals.com. All Manuals Search And Download.
SECCIÓN DE TV
OPERACIÓN DE TV Y AJUSTES
NOTA
Para seleccionar el número de canal medi-
ante los botones numéricos:
POWER
SELECT
PICTURE
EJECT
Para seleccionar un número de canal de un
•
1
4
2
5
8
0
3
6
solo dígito, presione primero [0] (ej. Para el
CH.
canal 2, presione [0] [2]).
Para seleccionar canales por cable cuyos números
•
sean superiores a 99, presione primero[+100/+10].
7
SLEEP
9
(ej. Para el canal 125, presione [+100/+10] [2] [5]).
VOL.
+100
+10
ZOOM
MUTE
SKIP
X
Y
4 Presione [VOL.
/
] para seleccionar el
nivel de volumen deseado.
PLAY
STOP
SLOW
REV
FWD
VOL.
DISC
MENU
PAUSE
VOLUMEN 20
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
DISPLAY
SETUP
Presione [MUTE] para silenciar el sonido al instante.
Vuelva a presionarlo para restaurar el nivel de
volumen anterior.
•
ENTER
TITLE
RETURN
CLEAR
A-B
NOTA
Si presiona [CH.
puede cambiar los canales del televisor. Incluso
si apaga la unidad en el modo DVD, cuando
vuelve a encenderlo se pondrá en el modo TV.
Los botones sombreados se utilizan para las siguientes operaciones.
•
K
L
/
] en el modo DVD,
•
PARA MIRAR UN PROGRAMA DE TV
1 Conecte el cable de alimentación de
la unidad a una toma estándar CA.
PARA VER UN CANAL POR CABLE O
SATÉLITE
NOTA
Si la unidad está conectada a una caja de convertidor
Si se visualiza algún dígito en la esquina de la
•
K
L
o caja de satélite, presione [CH.
/
] para selec-
pantalla, presione [POWER] sin desconectar
cionar CH3 o CH4 según el ajuste de canal de salida
del aparato, y seleccione en él el canal deseado.
el cable de alimentación.
2 Presione [POWER] para encender la unidad.
PARA VER SEÑALES DE ENTRADA DE
UN DISPOSITIVO EXTERNO
POWER
Cuando conecte un equipo externo a las tomas de
entrada delanteras AUDIO/VIDEO, presione
K
L
3 Presione [CH.
/
] para seleccionar el
K
L
[SELECT] o [CH.
/
] repetidamente hasta que
número de canal deseado.
aparezca en la pantalla “AUX1” o “AUX2”.
NOTA
CH.
Si hay un disco dentro de la unidad, se visu-
•
alizará el mensaje “DISCO ADENTRO” en la
O
pantalla durante 10 segundos.
Presione los botones numéricos para intro-
ducir el número de canal deseado.
1
4
7
2
5
8
3
6
9
DISCO ADENTRO
+100
0
+10
Para borrar el mensaje al instante, presione [CLEAR].
•
- 42 -
ES
Download from Www.Somanuals.com. All Manuals Search And Download.
AJUSTE DE CANAL
IDIOMA DE MENÚ
PROGRAMACIÓN AUTOMÁTICA DE CANAL
1 Presione [SETUP] y a continuación presione
[K] o [L] para seleccionar el “LANGUAGE”.
De acuerdo con la configuración de fábrica, esta
unidad ha memorizado todos los canales, incluidos
los que no están disponibles en su localidad. Esta
función solo pone automáticamente en memoria los
canales disponibles.
- TV SET UP -
CHANNEL SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
BACK LIGHT [BRIGHT]
B
ENTER
1 Presione [SETUP] y a continuación presione
2 Presione [ENTER] repetidamente para selec-
cionar “ENGLISH” = inglés, “ESPAÑOL” o
“FRANÇAIS”= francés.
[
K] o [L] para señalar “AJUSTE DE CANAL”.
- TV PREP. -
B
AJUSTE DE CANAL
AJUSTE DE V-CHIP
SETUP
IDIOMA
TITULO
[ESPAÑOL]
[OFF]
ENTER
LUZ DE FONDO [BRILLO]
3 Presione [SETUP] para salir del menú.
SETUP
2 Presione [ENTER] y a continuación presione
[
K] o [L] para señalar “PREA. AUTO CA.”.
– AJUSTE DE CANAL –
NOTA
AGREGAR/BORRAR CA (CATV)
Esta función selecciona sólo el idioma del
menú de pantalla; no la fuente de audio.
•
B
PREA. AUTO CA.
ENTER
Si por alguna razón el menú está en español o
•
en francés, presione [SETUP], luego [K] o
[L] para seleccionar “IDIOMA [ESPAÑOL]”
o “LANGAGE [FRANÇAIS]”, y a contin-
uación presione [ENTER] repetidamente para
seleccionar el idioma deseado y luego pre-
sione [SETUP].
3 Presione [ENTER].
ENTER
El sintonizador explora y memoriza todos los
canales activos de su localidad.
El sintonizador se detiene en el canal memorizado
inferior.
•
•
NOTA
Cuando está activado “PREA. AUTO CA.”
•
donde no hay entrada de señal de TV, apare-
cerá “NO HAY SEÑAL DE TV” en la pan-
talla después de completarse la exploración
de los canales
La unidad puede reconocer canales CATV como
canales de TV si las condiciones de recepción
son malas. En este caso, compruebe la conexión
de la antena y vuelva a intentar “PREA. AUTO
CA.” cuando las condiciones de recepción
mejoren.
La programación de canales memorizados
NO es necesaria cuando la unidad está conec-
tada a una caja de convertidor o caja de
satélite. Sólo tiene que seleccionar el canal
para caja de convertidor o entrada de satélite
(ej. CH3) de la unidad y a continuación selec-
cione el canal que desee en la caja de conver-
tidor o la caja de satélite.
•
•
- 43 -
ES
Download from Www.Somanuals.com. All Manuals Search And Download.
SECCIÓN DE DVD
REPRODUCCIÓN DE UN DISCO
POWER
SELECT
PICTURE
EJECT
A
5 Precione [EJECT ] para extraer la disco de
la unidad.
EJECT
OL
0
3
ZOOM
MUTE
SKIP
NOTA
Cuando el modo DVD se ha cambiado al modo
•
TV, el modo DVD se desactiva primero y a
continuación aparece la imagen y suena el
sonido en el TV al cabo de unos 4 segundos.
De la misma manera, cuando se presiona
[POWER] para apagar la unidad en el modo
DVD, este modo se desactiva primero y a con-
tinuación se apaga la unidad.
PLAY
STOP
SLOW
REV
FWD
DISC
MENU
PAUSE
DISPLAY
SETUP
ENTER
Puede aparecer “
” en la parte superior
•
TITLE
RETURN
derecha de la pantalla del TV durante su fun-
cionamiento, que avisa de que el DVD o el
disco han encontrado una operación prohibida.
Con los DVD que utilizan títulos para señales
de reproducción programada, la reproducción
puede empezar desde el segundo título y
puede omitir estos títulos.
Durante la reproducción de un disco de dos
capas, las imágenes pueden detenerse durante
un rato. Esto ocurre cuando la 1ª capa cambia
a la 2ª. No se trata de una anomalía.
Los botones sombreados se utilizan para las sigu-
ientes operaciones.
•
•
•
REPRODUCCIÓN BÁSICA
PARA EMPEZAR
Si es necesario, encienda el amplificador y cualquier
otro componente.
REPRODUCCIÓN DE MP3
1 Presione [POWER] para encender la unidad.
POWER
1
En el modo de parada, presione [DISC MENU] y precione
[K] o [L] para seleccionar el grupo o pista que desee.
2 Abra la bandeja del disco manualmente.
LISTA DE ARCHIVOS
NOMBRE DE DISCO
Nombre de carpeta 1
Nombre de carpeta 2
Nombre de carpeta 3
Nombre de carpeta 4
Nombre de archivo 1
Nombre de archivo 2
Nombre de archivo 3
DISC
MENU
Nombre de carpeta 1
Si ha selecciona un grupo, presione [B] o
•
3
4
Introduzca el disco elegido con la etiqueta hacia la parte trasera de la
unidad para reproducirlo. Al presionar suavemente el disco para intro-
ducirlo en la ranura, su reproducción empezará automáticamente.
[ENTER] para ir a la pantalla de selección de
pistas. Presione [s] para volver a la pantalla
anterior (excepto la página superior).
Si ha seleccionado una pista, presione [ENTER]
•
para empezar a reproducir pistas. Si empieza por
la que acaba de elegir se reproducirán las pistas
siguientes.
Si no puede visualizarse enseguida en pantalla la
•
lista entera de archivos, aparece la “ ”para ir a la
n
La reproducción empezará desde el primer capí-
tulo/pista del disco.
•
página siguiente. appears to go to the next page.
Presione [TITLE] para volver al archivo superior
de la jerarquía más alta del programa y de la
lista de archivos.
•
Si la reproducción no empieza automáticamente,
presione [PLAY O].
•
C
2
Presione [STOP ] para detener la reproducción.
Presione [STOP C] para detener la reproducción.
STOP
STOP
- 44 -
ES
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTA
REANUDACIÓN
Las carpetas se conocen como grupos; los
archivos, como pistas.
Los archivos MP3 van acompañados de
•
3
iconos.
•
•
•
•
Se puede reconocer un máximo de 255 carpetas.
Se puede reconocer un máximo de 999 archivos.
Pueden crearse hasta 8 jerarquías.
1 Durante la reproducción, presione [STOP C].
Se recomienda para esta unidad el uso de archivos
grabados según las especificaciones siguientes:
REANUDACIÓN ACTIVADA
STOP
Presione 'PLAY' para reproducir
Frecuencia de muestreo: 44,1 kHz o 48kHz
•
desde aquí.
Para reproducir desde el inicio,
primero presione 'STOP' y luego 'PLAY'.
Velocidad de transmisión de bits constante:
•
32kbps ~ 320kbps
Para archivos MP3 grabados en velocidad de
•
transmisión de bits variable (VBR), la unidad
puede no mostrar el tiempo real transcurrido.
(Ejemplo: DVD o CD audio)
Aparecerá el mensaje de reanudación en la pan-
talla del TV.
•
2 Presione [PLAY O], la reproducción contin-
uará desde el punto donde se paró la repro-
ducción.
MENÚ DE DISCO
PLAY
1 Presione [DISC MENU].
Para cancelar el modo de reanudación, presione
dos veces [STOP C].
Para MP3, la reproducción se reanudará desde el
principio de la pista actual.
La información de reanudación permanece acti-
vada incluso cuando apaga el interruptor princi-
pal.
DISC
•
MENU
•
Aparecerá el menú principal de DVD
Si esta función no está disponible,
•
el símbo-
•
•
•
lo puede aparecer en la pantalla del televisor.
Si el menú de disco está disponible en el disco,
aparecerán las opciones de idioma de audio, de
subtítulos, capítulos del título y otras para su
selección.
2 Presione [K], [L], [s] o [B] para seleccionar
un ítem y presione [ENTER] para confirmar la
selección.
ENTER
- 45 -
ES
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
- 46 -
ES
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
- 47 -
ES
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNAI CORPORATION
LIMITED WARRANTY
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship
as follows:
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from
the date of original retail purchase. Certain parts and LCD image burn-in are not covered under
this warranty.
LABOR:
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date
of original retail purchase.
LIMITS AND EXCLUSIONS:
This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail
purchase will be required together with the product to obtain service under this warranty.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing
or if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does
not apply to any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS
REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE
PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE
UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT
FUNAI CORP.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT
PRIOR NOTICE.
To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries,
please contact us at:
FUNAI CORPORATION
Customer Service
Tel :1-800-242-7158
19900 Van Ness Avenue, Torrance, CA 90501
Printed in China
1EMN21009
L3251UB ★★★★★
Download from Www.Somanuals.com. All Manuals Search And Download.
|