Symphonic DVD VCR Combo WF802 User Manual

OWNER’S

MANUAL

DVD PLAYER with VIDEO CASSETTE RECORDER

WF802

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

If you need additional assistance for set-up or operating

after reading owner’s manual, please call

TOLL FREE : 1 800 242-7158

_{Download from Www.S}P_omle_aa_ns_uae_lsr_.ce_oa_md_{. A}b_lle_Mf_ao_nr_ue_alsu_Ss_ein_arg_cht_Ah_nis_{d D}e_oq_wu_nli_op_am_d.ent.

IMPORTANT SAFEGUARDS

1. Read Instructions - All the safety and operating instruc-

proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of antenna-dis-

charge unit, connection to grounding electrodes, and

requirements for the grounding electrode. (Fig. A)

tions should be read before the appliance is operated.

2. Retain Instructions- The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions

should be followed.

FIGURE A

ANTENNA

LEAD

WIRE

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

5. Cleaning - Unplug this video product from the wall outlet

before cleaning. Do not use liquid cleaners or aerosol

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

cleaners. Use

damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted

service and, that for some specific reason, such as the pos-

sibility of the loss of an authorization code for a CATV

converter, is not intended to be unplugged by the user for

cleaning or any other purpose, may exclude the reference

to unplugging the appliance in the cleaning description

otherwise required in item 5.

6. Attachments - Do not use attachments not recommended by

the video product manufacturer as they may cause hazards.

7. Water and Moisture- Do not use this video product near

water, for example, near a bath tub, wash bowl, kitchen

sink, or laundry tub, in a wet basement, or near a swim-

ming pool, and the like.

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMP

NEC – NATIONAL ELECTRICAL CODE

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

S2898A

14. Lightning - For added protection for this video product

during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This

will prevent damage to the video product due to lightning

and power-line surges.

15. Power Lines - An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them

might be fatal.

8. Accessories - Do not place this video product on

an unstable cart, stand, tripod, bracket, or table.

The video product may fall, causing serious

injury to a child or adult, and serious damage to

the appliance. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or sold

with the video product. Any mounting of the appliance

should follow the manufacturer's instructions and should use

a mounting accessory recommended by the manufacturer.

An appliance and cart combination should be moved with

care. Quick stops, excessive force, and uneven surfaces may

cause the appliance and cart combination to overturn.

16. Overloading - Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind

into this video product through any openings as they may

touch dangerous voltage points or short-out parts that

could result in a fire or electric shock. Never spill liquid of

any kind on the video product.

18. Servicing - Do not attempt to service this video product

yourself as opening or removing covers may expose you to

dangerous voltage or other hazards. Refer all servicing to

qualified service personnel.

19. Damage Requiring Service - Unplug this video product

from the wall outlet and refer servicing to qualified service

personnel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the

video product.

9. Ventilation - Slots and openings in the cabinet are provid-

ed for ventilation and to ensure reliable operation of the

video product and to protect it from overheating, and these

openings must not be blocked or covered. The openings

should never be blocked by placing the video product on a

bed, sofa, rug, or other similar surface. This video product

should not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or

the manufacturer's instructions have been adhered to.

10. Power Sources - This video product should be operated

only from the type of power source indicated on the mark-

ing label. If you are not sure of the type of power supply

to your home, consult your appliance dealer or local power

company. For products intended to operate from battery

power, or other sources, refer to the operating instructions.

11. Grounding or Polarization - This video product is

equipped with a polarized alternating-current line plug (a

plug having one blade wider than the other). This plug will

fit into the power outlet only one way. This is a safety fea-

ture. If you are unable to insert the plug fully into the out-

let, try reversing the plug. If the plug should still fail to fit,

contact your electrician to replace your obsolete outlet. Do

not defeat the safety purpose of the polarized plug.

12. Power Cord Protection - Power supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying par-

ticular attention to cords at plugs, convenience receptacles,

and the point where they exit from the appliance.

c. If the video product has been exposed to rain or water.

d. If the video product does not operate normally by follow-

ing the operating instructions. Adjust only those controls

that are covered by the operating instructions as an improp-

er adjustment of other controls may result in damage and

will often require extensive work by a qualified technician

to restore the video product to its normal operation.

e. If the video product has been dropped or damaged in any way.

f. When the video product exhibits a distinct change in per-

formance this indicates a need for service.

20. Replacement Parts - When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer or have the same character-

istics as the original part. Unauthorized substitutions may

result in fire, electric shock or other hazards.

21. Safety Check - Upon completion of any service or repairs

to this video product, ask the service technician to perform

safety checks to determine that the video product is in

proper operating condition.

13. Outdoor Antenna Grounding - If an outside antenna or

cable system is connected to the video product, be sure the

antenna or cable system is grounded so as to provide some

protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with regard to

22. Heat - This video product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

1L25

A NOTE ABOUT RECYCLING

This product’s packaging materials are recyclable and can be reused. Please dispose of all materials in

accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local

regulations concerning chemical wastes.

The serial number of this product may be found on the back of the DVD/VCR player. This serial number is

unique to your machine. You should record the number and other vital information here and retain this book as

a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

ABOUT COPYRIGHT

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

This product incorporates copyright protection technology that is protected by claims of certain U.S. patents and

other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copy-

right protection technology must be authorized by Macrovision Corporation, and is intended for home and other

limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

SUPPLIED ACCESSORIES

Coaxial Cable

Remote control

(NA200UD)

Two AA batteries

A/V cables

(approx. 3 feet (100 cm)

long) (WPZ0102TM015)

WPZ0901TM002

SYMBOLS USED IN THIS MANUAL

The following symbols below appear in some headings and notes in this manual, with the following meanings

VCR

: refers to playback of video cassette tapes.

DVD

: refers to playback of DVD video discs.

: refers to playback of audio CDs.

MP3

: refers to playback of MP3 discs.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

1L25

TABLE OF CONTENTS

ꢀ LASER SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

PLAYING A DVD VIDEO OR AN AUDIO CD . . . . . . . . . . 23

USING THE DVD MENUS . . . . . . . . . . . . . . . . . . . . . . . . . 23

USING THE TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . 24

PAUSING PLAYBACK OR DISPLAYING A STILL

PICTURE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

RESUMING PLAYBACK FROM THE POINT WHERE

ꢀ IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . . . . 3

ABOUT COPYRIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . 4

SYMBOLS USED IN THIS MANUAL. . . . . . . . . . . . . . . . . . 4

ꢀ FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

ꢀ PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

ꢀ ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

PLAYABLE DISCS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

DISC TYPES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

ꢀ OPERATING CONTROLS AND FUNCTIONS. . . . . . . . . . . 9

DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

DISPLAYS DURING OPERATION . . . . . . . . . . . . . . . . . . . 12

LOADING THE BATTERIES. . . . . . . . . . . . . . . . . . . . . . . . 12

ꢀ VIDEO/DVD SWITCHING . . . . . . . . . . . . . . . . . . . . . . . . . 13

ꢀ HOOKUPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

DVD/VCR TO TV CONNECTION. . . . . . . . . . . . . . . . . . . . 14

SETTING THE CH3/CH4 SWITCH . . . . . . . . . . . . . . . . . . . 14

CONNECTING TO A TV . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

CONNECTING TO A TV THAT HAS AN S-VIDEO INPUT

JACK OR COMPONENT VIDEO IN JACKS. . . . . . . . . . . . 14

CONNECTING TO AN AMPLIFIER EQUIPPED WITH

PLAYBACK STOPPED . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

STEPPING THROUGH FRAMES . . . . . . . . . . . . . . . . . . . . 24

FAST FORWARD/REVERSE . . . . . . . . . . . . . . . . . . . . . . . . 25

SLOW MOTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

STARTING FROM A DESIRED TRACK . . . . . . . . . . . . . . . 25

PLAYING FROM A DESIRED TITLE OR A CHAPTER . . . 25

STARTING FROM A DESIRED TIME COUNT. . . . . . . . . . 26

MARKER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

RANDOM (Audio CD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

PROGRAM (Audio CD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

ZOOM PLAYBACK (enlargement on-screen) . . . . . . . . . . . . 28

PLAYING AN MP3 DISC. . . . . . . . . . . . . . . . . . . . . . . . . . . 29

CHANGING THE ON-SCREEN DISPLAY DURING

MP3 DISC PLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

PLAYING A DESIRED TRACK FROM AN MP3 DISC . . . 30

PLAYING AN MP3 DISC RANDOMLY . . . . . . . . . . . . . . . 30

PLAYING AN MP3 DISC IN A PROGRAM. . . . . . . . . . . . . 30

ꢀ SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

CHANGING THE AUDIO LANGUAGE OR SOUND

DIGITAL INPUT JACKS SUCH AS MD DECK OR DAT

DECK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

CONNECTING TO A DOLBY DIGITAL DECODER. . . . . . 16

CONNECTING TO AN ANALOG AUDIO. . . . . . . . . . . . . . 16

ꢀ SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

AUTOMATIC CHANNEL SET UP. . . . . . . . . . . . . . . . . . . . 17

TO CHANGE THE ON-SCREEN LANGUAGE. . . . . . . . . . 18

CLOCK SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

ꢀ PLAYBACK FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

NORMAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

AUTO REPEAT PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . 19

SEARCH FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

ꢀ RECORDING FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . 20

VIEWING AND RECORDING THE SAME PROGRAM. . . 20

OTR (One Touch Recording). . . . . . . . . . . . . . . . . . . . . . . . . 20

TIMER RECORDING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

HINTS FOR TIMER RECORDING . . . . . . . . . . . . . . . . . . . 21

ꢀ SPECIAL FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

COPYING A VIDEO TAPE. . . . . . . . . . . . . . . . . . . . . . . . . . 22

MTS (Multi-Channel Television Sound) SYSTEM . . . . . . . . 22

AUTO REWIND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

REAL TIME TAPE COUNTER. . . . . . . . . . . . . . . . . . . . . . . 23

ꢀ PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

MODE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

CHANGING THE SUBTITLE LANGUAGE . . . . . . . . . . . . 32

CHANGING THE CAMERA ANGLE

(Multi-Angle Pictures). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

CHANGING THE ON-SCREEN DISPLAY . . . . . . . . . . . . . 33

BLACK LEVEL SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . 33

ꢀ CHANGING THE SETUP ITEMS. . . . . . . . . . . . . . . . . . . . 34

LANGUAGE SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

DISPLAY SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

AUDIO SETTINGS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

PARENTAL LOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

ꢀ LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . . . . . . . . 38

ꢀ TROUBLESHOOTING GUIDE. . . . . . . . . . . . . . . . . . . . . . 39

ꢀ HANDLING PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . 40

DISC HANDLING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

ꢀ SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

INDICE

ꢀ CONTROLES DEL FUNCIONAMIENETO Y SUS FUNCIONES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

ꢀ CAMBIO DE VCR/DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

ꢀ CONEXIONES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

DVD/VCR A CONEXIÓN DE TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

AJUSTANDO EL CONMUTADOR CH3/CH4

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

CONECTANDO A UN TV

. . . 46

CONECTADO A UN TV QUE TIENE TOMA DE ENTRADA DE S-VÍDEO o TOMAS DE ENTRADA DE VÍDEO COMPONENTE

CONECTANDO A UN AMPLIFICADOR EQUIPADO CON TOMAS DE ENTRADA DIGITAL, TALES COMO PLATINA MD O PLATINA DAT

. 46

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

CONECTANDO A UN DESCODIFICADOR DIGITAL DOLBY

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

CONECTANDO A UN AUDIO ANALÓGICO

ꢀ

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

PREPARACIÓN

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

PREPARACIÓN DE CANAL AUTOMÁTICA

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

PREPARACIÓN DE RELOJ

ꢀ REPRODUCCIÓN DE UN DISCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

REPRODUCIENDO UN DVD, VIDEO O UN CD AUDIO

–

Download from Www.Somanuals.com. All Manuals Search And Download.

1L25

FEATURES

Mode

DVD

¡Dolby Digital sound

¡On-screen display

This player can handle Dolby Digital surround sound

with 5.1 channels when connected to a Dolby Digital

decoder.

Information about the current operation can be displayed

on the TV screen, allowing you to confirm the currently

active functions (such as program playback), on the TV

screen using the remote control.

¡Still/fast/slow/step playback

Various playback modes are available including still pic- ¡Search

tures, fast forward/reverse, slow motion and step frames.

Chapter search: Search for a chapter designated by user is

possible.

¡Random playback for audio CD and MP3

This player can shuffle the order of tracks to play them in

random order.

Title search: Search for a title designated by user is pos-

sible.

Track search: Search for a track designated by user is

¡Program playback for audio CD and MP3

You can program the order of tracks to play them in any

desired order.

possible.

Time search: Search for a time designated by user is

possible.

¡DVD menus in a desired language

You can display DVD menus in the desired language, if

available on the DVD.

¡Repeat

Chapter:

Repeated playback of the chapter of the

disc being played is possible.

Title:

Repeated playback of the title of the disc

being played is possible.

Repeated playback of the track of the disc

being played is possible.

¡Screen saver/Auto power-off functions

The screen saver program starts when there is no input

from the player for five minutes in the stop mode. When

the screen saver program has been activated for 30 min-

utes, the screen saver is automatically turned off.

Track:

Disc (audio CD): Repeated playback of the entire disc being

(MP3)

played is possible.

Playback of the section between A and B

(designated by user) is possible.

Repeated playback of the album of the

MP3 disc being played is possible.

¡Subtitles in a desired language

You can select the desired language for the subtitle dis-

play, if that language is available on the disc.

A-B:

Album:

¡Selecting a camera angle

You can select the desired camera angle, if the disc con-

tains sequences recorded from different angles.

¡Zoom

A ×2 and ×4 magnified screen can be displayed.

¡Marker

¡Choices for audio language and sound mode

You can select the desired audio language and sound

mode, if different languages and modes are available on

the disc.

A part designated by user can be called back.

¡Resume Play

User can resume playback from the part at which the play

was stopped even if the power is turned off.

¡Parental lock

You can set the control level to limit playback of discs

which may not be suitable for children.

¡Dimmer

Brightness of the display can be varied.

¡Automatic detection of discs

This player automatically detects if the loaded disc is

DVD, audio CD or MP3 on disc.

¡Bit rate indication

¡DRC (Dynamic range control)

You can control the range of sound volume.

¡Playing an MP3 disc

You can enjoy MP3 files which are recorded on CD-

R/RW.

¡Direct Search

You can search for the desired title, chapter, and track with

the Number buttons during playback or in stop mode.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

1L25

Playback

Mode

VCR

¡S-VHS Quasi Playback (SQPB)

(Allows you to view a tape recorded in S-VHS format.)

¡Auto Repeat

Hardware specifications

¡Auto Head Cleaner

¡4 Head HiFi Stereo

¡2 Step Picture Search Operation

¡Index Search

¡Bilingual on-screen menu display selectable in

English, French, or Spanish

¡Time Search

¡181 channel capability PLL frequency synthesiz-

er tuner with direct station call

(A cable converter box may be necessary to view scram-

Recording

¡1Year, 7 events (including Daily and WeeklyTimer

Recording)

bled cable channels.)

Automatic functions

¡OTR (One Touch Recording)

¡Auto power on system

Automatically turns the DVD/VCR on when you insert the

cassette.

¡Digital Auto Tracking (DTR)

PRECAUTIONS

AVOID THE HAZARDS OF

INSTALLATION LOCATION

ELECTRICAL SHOCK AND FIRE

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it

from AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on your DVD/VCR,

unplug the power cord immediately and take the unit to

our Authorized Service Center for servicing.

• Do not put your fingers or objects into the DVD/VCR

cassette holder.

For safety and optimum performance of your DVD/VCR:

• Install the DVD/VCR in a horizontal and stable posi-

tion. Do not place anything directly on top of the

DVD/VCR. Do not place the DVD/VCR directly on top

of the TV.

• Shield it from direct sunlight and keep it away from

sources of intense heat. Avoid dusty or humid places.

Avoid places with insufficient ventilation for proper

heat dissipation. Do not block the ventilation holes

on the sides of the DVD/VCR. Avoid locations subject

to strong vibration or strong magnetic fields.

MOISTURE CONDENSATION WARNING

Moisture condensation may occur inside the unit when it is

moved from a cold place to a warm place, or after heating a

cold room or under conditions of high humidity. Do not use

the DVD/VCR at least for 2 hours until its inside is dry.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

1L25

ABOUT THE DISCS

PLAYABLE DISCS

DISC TYPES

[

]

The following discs can be played back on this

DVD/VCR.

DVD

Data on a DVD is divided into sections called "titles", and

then into subsections called "chapters", each of which is

given a title or chapter number. Playback conditions are

preset on some DVD video discs, and these playback con-

ditions take priority over user operations on this player. If

a function you selected does not run as desired, refer to

the manual accompanying the disc.

Maximum

Playback Time

Disc Type

Logo

Contents Disc Size

Approx. 4 h

(single-sided)

12 cm

Approx. 8 h

(double-sided)

Sound

and

Pictures

DVD

Video

Approx. 80 min

(single-sided)

8 cm

Example

Approx. 160 min

(double-sided)

Title 1

Title 2

12 cm

74 min

20 min

Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2

Audio

Sound

8 cm

(singles)

This player conforms to the NTSC color system. You can-

not play discs recorded in other color systems such as

PAL or SECAM.

¡Some discs include region codes as shown below.

[

]

AUDIO CD

Data on an audio CD is divided into sections called

“tracks”, each of which is given a track number.

¡The number inside the symbol refers to a region of the

world, and a disc encoded in a specific region format

can only be played back on DVD/VCR with the same

region code.

Example

Track 1

Track 2

Track 3

Track 4

Track 5

Track 6

The following discs cannot be played back on this

DVD/VCR.

DVD with region codes other than 1 or ALL.

DVD-ROM

[

]

DVD-RAM (Never attempt to play back,

otherwise a malfunction may result.)

CD-ROM

MP3

Data on an MP3 is divided into sections called "albums",

and then into subsections called "tracks", each of which is

given an album or track number.

VSD

CDV (Only plays back the audio part.)

CD-G (Only plays back the sound.)

CD-R/CD-RW

(Only plays back discs on which audio CD or

MP3 are recorded.)

Example

Album 1

Album 2

Track 1

Track 2

Track 3

Track 4

Track 1

Track 2

CD-I

(Never attempt to play back, otherwise a mal-

function may result.)

SACD

Photo CD

(Never attempt to play back, otherwise a mal-

function may result.)

Video CD

(Never attempt to play back, otherwise a mal-

function may result.)

Any other discs without compatibility indications

–

Download from Www.Somanuals.com. All Manuals Search And Download.

1L25

OPERATING CONTROLS AND FUNCTIONS

FRONT PANEL

7 8 9

POWER

VIDEO

OUTPUT

CHANNEL

DVD OPERATION

SKIP/REV PLAY

VCR OPERATION

TIMER

SET

AUDIO

VCR/TV

CST.IN

OPEN/CLOSE

STOP

FWD/SKIP

STOP/EJECT REW

PLAY

F.FWD REC/OTR

23 21

19 17 15 13 11

18 16 14 12 10

REMOTE CONTROL

tape in the DVD/VCR. It flashes when all timer

recordings or One-Touch Recordings are finished.

7. POWER Button [page 17]

POWER SPEED AUDIO

Press to turn the power on and off.

8. POWER Light

SKIP/CH.

Lights up when the power is on.

9. VIDEO In Jack

VCR/TV

SLOW

Connect a video cable coming from the video out

jack of a camcorder, another VCR, or a video source

(laser disc player, camcorder, etc.) here.

10. AUDIO In Jacks

+100

DISPLAY DVD

VCR

PAUSE

Connect audio cables coming from the audio out jacks

of a camcorder, another VCR, or an audio source here.

11. TIMER SET Button [page 21]

Press to put the DVD/VCR into standby mode for a

timer recording.

12. CST IN Light [page 19]

Lights up when a cassette is in the DVD/VCR.

13. VCR/TV Light [page 17]

PLAY

STOP

RECORD

ENTER

SETUP

TITLE

RETURN

Lights up when the DVD/VCR is in the VCR posi-

tion, and goes off when it is in the TV position.

14. CHANNEL Buttons [page 17]

MODE

CLEAR/

MODE ZOOM

C.RESET

SUBTITLE ANGLE REPEAT

In VCR mode, press to change TV channels on the

DVD/VCR; press to adjust the tracking during nor-

mal or slow motion playback; press to remove verti-

cal jitter in a Still picture.

1. Disc loading tray

2. DVD OUTPUT Light (Green) [page 13]

15. REC/OTR Button (VCR) [page 20]

Press once to start a recording. Press repeatedly to

start a One-Touch Recording.

This light appears when the DVD output mode is

selected. You can only watch DVDs when the green

DVD OUTPUT Light is on. To make the green DVD

OUTPUT light come on, press the DVD button on

the remote control or the OUTPUT button on the

front panel.

16. F.FWD Button (VCR) [page 17]

Press to rapidly advance the tape, or view the picture

rapidly in forward during playback. (Forward

Search). When setting program (For example:setting

clock or timer program), press to determine your

selection and proceed to the next step you want to

input. Press to determine the setting modes from the

on screen menu. Press to add or delete channel num-

bers during channel preset.

3. VCR OUTPUT Light (Green) [page 13]

This light appears when the VCR output mode is

selected. You can only watch tapes when the green

VCR OUTPUT light is on. To make the green VCR

OUTPUT light come on, the VCR button on the

remote control or the OUTPUT button on the front

panel.

17. PLAY Button (VCR) [page 17]

Press to begin playback. Press to enter digits when

setting program (For example: setting clock or timer

program). Press to select the setting modes from the

on screen menu.

4. CASSETTE COMPARTMENT

5. REC/OTR Light [page 20]

Lights up during recording.

18. REW Button (VCR) [page 18]

6. TIMER SET Light [page 20]

Press to rewind the tape, or to view the picture rapid-

ly in reverse during the playback mode (Rewind

Search). Press to cancel a setting of timer program.

Press to correct digits when setting program (For

This light glows when the DVD/VCR is in standby

mode or off for a timer recording or during a One-

Touch Recording. It flashes if the TIMER SET but-

ton is pressed for a timer recording, but there is no

–

9 –

Download from Www.Somanuals.com. All Manuals Search And Download.

1L25

example: setting clock or timer program). Press to

add or delete channel numbers during channel preset.

select the corresponding mode by pressing the

DVD or the VCR button on the remote control.

19. STOP/EJECT Button (VCR) [page 21

]

32. h Button

GEJECT Button

Press to remove the tape from the VCR.

GSTOP Button

Press to stop the tape motion. Press to enter digits

when setting program (For example:setting clock

or timer program). Press to select the setting

modes from the on screen menu.

GDVD mode

Press to view the DVD picture in fast reverse

motion or to reverse playback of an Audio CD.

GVCR mode

Press to rewind the tape, or to view the picture

rapidly in reverse during the playback mode

(Rewind Search). Press to cancel a setting of

timer program. Press to correct digits when setting

program (For example: setting clock or timer pro-

gram). Press to add or delete channel numbers

during channel preset.

20. OUTPUT Button [page 13]

Press to select DVD mode or VCR mode.

You can switch the output mode either by pressing

the OUTPUT button on the front panel, or by press-

ing the DVD or the VCR button on the remote con- 33. STOP Button

trol. However, if you press the OUTPUT button

on the front panel first, you need to re-select the

corresponding mode by pressing the DVD or the

VCR button on the remote control.

GDVD mode

Press to stop the disc motion.

GVCR mode

Press to stop the tape motion. Press to enter digits

when setting program (For example: setting clock

or timer program). Press to select the setting

modes from the on screen menu.

34. RECORD Button

21. FWD/SKIP Button (DVD) [page 25]

Plays back from the beginning of the next chapter or

track. Hold down to fast forward playback.

22. PLAY Button (DVD) [page 23]

Press to begin playback.

Press to start a recording.

23. SKIP/REV Button (DVD) [page 25]

Plays back from the beginning of the current chapter

or track. Hold down to fast reverse playback.

24. STOP Button (DVD) [page 23]

Stops operation of the disc.

35. MENU Button

GDVD mode [page 23]

Press to display the menu of the Disc.

GVCR mode [page 17]

Press to access the VCR menu.

36. TITLE Button [page 24]

25. OPEN/CLOSE Button [page 23]

Press to insert discs into or remove them from the tray. 37. SETUP Button [page 34]

26. Display, Remote Sensor Window

27. SPEED Button [page 20]

Press to enter the setup mode.

38. ZOOM Button [page 28]

Enlarges part of a DVD-reproduced image.

39. MODE Button [pages 19]

Activates program playback or random playback

mode when playing CDs or MP3. Sets Black level.

40. SUBTITLE Button [page 32]

Press to select the desired subtitle language.

41. ANGLE Button [page 32]

Press to change the camera angle to see the sequence

being played back from a different angle.

42. REPEAT Button [page 27]

Repeats playback of the current disc, title, chapter or

track.

Press to select the VCR’s recording speed (SP or SLP)

28. POWER Button

Press to turn the power on and off.

29. Number Buttons

GDVD mode [page 25]

Press to directly select a Track (Audio CD) for

playback.

Press to program Tracks (Audio CD) for playback.

GVCR mode [page 17]

Press to select TV channels on the DVD/VCR.

To select channels, enter channel numbers as a

two-digit number for the quickest results. For

example, to select channel 6, press 0 then 6.

43. A-B REPEAT Button [page 27]

Repeats playback of a selected section.

44. SEARCH MODE Button

+100 Button:

If you want to select channels 100 and above, press

this button first, then press the last two digits. For

example, to select channel 125, press +100 button

first, then press 2 and 5.

GDVD mode [page 25]

Press to access or remove the Search display,

which allows you to go directly to a specific

Title/Chapter/Track/Time.

30. DISPLAY Button

GVCR mode [page 19]

GDVD mode [page 29]

Press to perform a Time Search or an Index Search.

45. CLEAR/C.RESET Button

GDVD mode [page 26]

Press to access or remove the display screen during

DVD or Audio CD playback.

GVCR mode [page 22]

Press to access or remove the VCR’s on-screen sta-

tus display.

Press to reset the setting.

GVCR mode [page 18]

Press to reset the counter. Press to exit from the

MENU screen.

31. DVD Button [page 13]

Press to select DVD mode for the remote control.

GYou can switch the OUTPUT mode either by

pressing the OUTPUT button on the front panel, or

by pressing the DVD or the VCR button on the

remote control. However, if you press the OUTPUT

button on the front panel first, you need to re-

46. RETURN Button

Returns to the previous operation.

47. Arrow Buttons

Use when making settings while watching the

display on a TV screen.

48. ENTER Button

–

_{Download from Www.Somanuals.co}1_m0_{. All Manuals Search And Download.}

1L25

Press to accept a setting.

frame at a time during still mode.

53. SLOW Button [page 19]

49. g Button

GDVD mode

Press to fast forward the Disc. Press the Pause but-

ton, then press the FWD button to begin slow

motion playback. Press the FWD button repeated- 54. VCR/TV Button [page 21]

ly to change the forward speed of slow motion.

GVCR mode

During tape playback, press to view the video tape in

slow motion. Press again to resume normal playback.

This button does not affect DVD playback.

Use to select VCR or TV position. If the VCR/TV

light appears on the front of the DVD/VCR, it is in

VCR position (in either VCR or DVD mode). If the

VCR/TV light doesn’t appear on the front of the

DVD/VCR, it is in TV position.

Press to rapidly advance the tape, or view the pic-

ture rapidly in forward during playback (Forward

Search). When setting program (For example: set-

ting clock or timer program), press to determine

your selection and proceed to the next step you

want to input. Press to determine the setting

modes from the on screen menu. Press to add or

delete channel numbers during channel preset.

50. PLAY Button

GVCR Position

When the green VCR OUTPUT light appears on the

front of the DVD/VCR, use the VCR to watch a tape,

watch a TV program while recording it, or watch a

TV broadcast using the CHANNEL or the Number

buttons to change channels at the DVD/VCR.

When the green DVD OUTPUT light appears on

the front of the DVD/VCR, use the DVD/VCR to

view Disc playback or menus.

GDVD mode

Press to begin playback.

GVCR mode

Press to begin playback. Press to enter digits when

setting program (For example: setting clock or

timer program). Press to select the setting modes

from the on screen menu.

GTV Position

Use to watch TV (changing channels at the TV) or

watch one program while recording another.

55. SKIP/CH. Buttons

51. VCR Button [page 13]

GDVD mode

Press to select VCR mode for the remote control.

GYou can switch the OUTPUT mode either by

pressing the OUTPUT button on the front panel, or

Press to skip Chapters or Tracks.

GVCR mode

Press to change TV channels on the DVD/VCR.

by pressing the DVD or the VCR button on the 56. AUDIO Button [page 31]

remote control. However, if you press the OUTPUT

Press to select a desired audio language or sound mode.

button on the front panel first, you need to re- 57. AC Power Cord

select the corresponding mode by pressing the

DVD or the VCR button on the remote control.

52. PAUSE Button

Notes

GDVD mode [page 24]

¡To use the remote control to operate the DVD/VCR

and its features, press the DVD button on the remote

control before pressing other DVD buttons. Verify

that the green DVD OUTPUT Light is on.

¡To use the remote control to operate the VCR and its

features, press the VCR button on the remote control

before pressing other VCR buttons. Verify that the

green VCR OUTPUT Light is on.

Press to pause Disc playback. Press repeatedly to

advance the DVD picture step by step (or one

frame at a time).

GVCR mode [page 19]

While recording, press to temporarily stop the

recording (pause). Press a second time to resume

normal recording. You can not pause a One-Touch

Recording. Or, press during tape playback to

freeze the picture. Press to advance the picture one

REAR VIEW

58 59

DVD/VCR

OUT

ANT - IN

AUDO

DVD/VCR

AUDIO OUT

DIGITAL AUDIO OUT

PCM / BITSTREAM

S-VIDEO

OUT

COAXIAL

ANT - OUT

VIDEO

CH3 CH4

66 64

Connect to a standard AC outlet to supply power

to the DVD/VCR.

58. AUDIO IN Jacks

Connect audio cables coming from the audio out

jacks of a camcorder, another VCR, or an audio

source here.

59. DVD/VCR AUDIO OUT Jacks

–

_{Download from Www.Somanuals.co}1_m1_{. All Manuals Search And Download.}

1L25

Connect the supplied audio cables here and to the

Audio In jacks of a television or other audio

equipment.

64. CH3/CH4 Switch

Set to channel 3 or 4 to use your TV with your

DVD/VCR.

60. COAXIAL Jack

65. ANT-IN (Antenna In) Jack

Connect your antenna, Cable Box, or Direct

Broadcast System.

66. ANT-OUT (Antenna Out) Jack

Use the supplied RF coaxial cable to connect this

jack to the ANTENNA IN Jack on your TV.

Connect an optional coaxial digital audio cable

here and to the Coaxial Digital Audio In jack of a

decoder or audio receiver.

61. S-VIDEO OUT Jack

Connect an optional S-Video cable here and to

the S-Video In jack of a television.

62. DVD/VCR VIDEO OUT Jack

Connect the yellow video cable (supplied) here

and to the TV’s Video In jack.

Notes

¡The S-VIDEO OUT jack, COAXIAL jack, and

OPTICAL jack are only useful in DVD mode.

63. VIDEO IN Jack

Connect a cable coming from the video out jack

of a camcorder, another VCR, or an audio-visual

source (laser disc player, video disc player, etc.)

here.

DISPLAYS DURING

OPERATION

DISPLAY

Lit when the

A-B repeat function

is on.

Lights up when a DVD

is inserted into the tray.

Power on

Lit when the

repeat function is on.

No disc inserted

Tray open

Tray closed

Loading the Disc

Power off

Lights up when the

Lights up when a

inserted disc comes

CD is inserted on

to a pause.

the tray.

Lit when the inserted

disc is being played back.

Displays how long the current title

or track has been playing. When a

chapter or track is switched, the

number of the new title, chapter or

track is displayed.

LOADING THE BATTERIES

1. Open the battery compartment

cover.

2. Insert two AA batteries, with each

one oriented correctly.

3. Close the cover.

Notes

¡Do not mix alkaline and manganese batteries.

¡Do not mix old and new batteries.

–

_{Download from Www.Somanuals.co}1_m2_{. All Manuals Search And Download.}

1L25

VCR/DVD SWITCHING

Since this product comprises VCR and DVD players, it is necessary to select the correct

output mode.

SWITCHING TO VCR MODE

SWITCHING TO DVD MODE

Press the VCR button on the remote control.

(Verify that the VCR OUTPUT Light is lit.)

Press the DVD button on the remote control.

(Verify that the DVD OUTPUT Light is lit.)

Notes

¡Pressing only the OUTPUT button on the front panel does not switch the mode of the remote control. You

always need to select the correct mode on the remote control too.

POWER

VIDEO

POWER SPEED AUDIO

OUTPUT

CHANNEL

DVD OPERATION

SKIP/REV PLAY

VCR OPERATION

TIMER

SET

AUDIO

VCR/TV

CST.IN

OPEN/CLOSE

STOP

FWD/SKIP

STOP/EJECT REW

PLAY

F.FWD REC/OTR

SKIP/CH.

VCR/TV

SLOW

+100

DVD OUTPUT Light

DVD button

VCR OUTPUT Light

VCR button

DISPLAY DVD

VCR

PAUSE

PLAY

OUTPUT

STOP

RECORD

ENTER

LAY

FWD/SKIP

STOP/EJECT REW

SETUP

TITLE

RETURN

MODE

CLEAR/

MODE ZOOM

C.RESET

OUTPUT button

SUBTITLE ANGLE REPEAT

–

_{Download from Www.Somanuals.co}1_m3_{. All Manuals Search And Download.}

1L25

HOOKUPS

SETTING THE CH3/CH4

SWITCH

DVD/VCR TO TV CONNECTION

1. Disconnect the AC power cord of the TV from the If your TV does not have A/V terminals:

AC outlet.

When the DVD/VCR is in the VCR Playback mode or

when the DVD/VCR is in the VCR mode, your TV will

2. Disconnect the antenna or cable from the TV.

3. Connect the antenna or cable to the ANT-IN jack of receive signals from the DVD/VCR on either channel

the DVD/VCR.

4. Connect the DVD/VCR to the TV using the coaxial the selector switch to CH3 or CH4 (which is located in

cable. the back of your DVD/VCR), whichever is not used for

3 or channel 4. To use the DVD/VCR with your TV, set

5. Plug the AC power cords of the DVD/VCR and TV normal broadcasts in your area. Then set your TV to

into the AC outlets.

the same channel.

[VHF/UHF

[Back of the DVD/VCR]

[Indoor antenna]

combination antenna]

[Back of the

ANT - IN

UHF/VHF combination TV]

Coaxial cable

(supplied)

ANT IN

ANT - OUT

CH4

CH3

CH3 CH4

UHF/VHF

[Cable box or satellite box]

ANT - OUT

CH3 CH4

OUT

From Cable or

Satellite Company

[Back of the DVD/VCR]

Note to CATV system installer

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that pro-

vides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected

to the grounding system of the building, as close to the point of cable entry as practical.

CONNECTING TO A TV

DVD/VCR

OUT

ANT - IN

Antenna/Cable signal

AUDO

DVD/VCR

AUDIO OUT

DIGITAL AUDIO OUT

S-VIDEO

OUT

PCM

BITSTREAM

COAXIAL

ANT - OUT

A/V-compatible or

wide screen TV

VIDEO

CH3 CH4

To ANT. IN

of TV

[Fig. 1]

To VIDEO INPUT jack

To Right (red) and Left (white)

AUDIO INPUT jacks

To VIDEO OUT jack

AUDIO OUT jacks

Notes

¡Connect the DVD/VCR directly to a TV. If the A/V cables are connected to a VCR, pictures may be

distorted due to the copy protection system.

CONNECTING TO A TV THAT HAS AN

S-VIDEO INPUT JACK OR COMPONENT VIDEO IN JACKS

FOR TVs WITH S-VIDEO INPUT JACK

Use an S-Video cable (commercially available) in place of the yellow video cable to enjoy higher quality pic-

tures.

The S-Video connection only supplies video (picture) in the DVD mode of the DVD/VCR. Therefore, in order to

use the VCR features or view TV channels on the DVD/VCR, you still need to either connect the RF coaxial cable

between the ANT-OUT jack of the DVD/VCR and the TV’s Antenna In jack, or connect the yellow video cable as

described earlier (Fig.1). To connect the supplied RF coaxial cable, see “DVD/VCR TO TV CONNECTION”

above.

DVD/VCR

OUT

ANT - IN

AUDO

DVD/VCR

AUDIO OUT

DIGITAL AUDIO OUT

PCM / BITSTREAM

COAXIAL

S-VIDEO

OUT

A/V-compatible or

wide screen TV

ANT - OUT

VIDEO

CH3 CH4

To Right (red) and Left (white)

AUDIO INPUT jacks

AUDIO OUT jacks

[Fig. 2]

To S-VIDEO INPUT jack

To S-VIDEO OUT jack

–

_{Download from Www.Somanuals.co}1_m4_{. All Manuals Search And Download.}

1L25

CONNECTING TO AN AMPLIFIER EQUIPPED WITH DIGITAL

INPUT JACKS SUCH AS MD DECK OR DAT DECK

Use an audio coaxial digital cables (not included) for the audio connections.

Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck.

DVD/VCR

OUT

ANT - IN

AUDO

DVD/VCR

AUDIO OUT

DIGITAL AUDIO OUT

PCM / BITSTREAM

COAXIAL

S-VIDEO

OUT

ANT - OUT

VIDEO

CH3 CH4

Amplifier equipped with digital

input jacks, MD deck,

DAT deck, etc.

To COAXIAL DIGITAL

AUDIO OUT jack

To COAXIAL DIGITAL

AUDIO INPUT jack

[Fig. 4]

Notes

¡The audio source on a disc in the 5.1 channel Dolby Digital surround format cannot be recorded as digital

sound by an MD or DAT deck.

¡Be sure to turn off the power to all components in the system before connecting another component.

¡Refer to the Owner’s Manuals for the components to be connected to the DVD/VCR.

¡Set Dolby Digital to off for audio output in the setup mode. Playing a DVD disc using incorrect settings may

generate noise distortion, and may also damage the speakers. (See page 36 to set Dolby Digital to on)

–

_{Download from Www.Somanuals.co}1_m5_{. All Manuals Search And Download.}

1L25

CONNECTING TO A DOLBY DIGITAL DECODER

If using this DVD/VCR to play a DVD disc in 5.1 channel Dolby Digital surround formats, the DVD/VCR out-

puts a Dolby Digital data stream from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the DVD/VCR

up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-

quality surround sound of a professional standard such as can be heard in movie theaters.

Use an audio coaxial digital cables (not included) for the audio connections.

DVD/VCR

OUT

ANT - IN

AUDO

DVD/VCR

AUDIO OUT

DIGITAL AUDIO OUT

S-VIDEO

OUT

PCM

BITSTREAM

COAXIAL

ANT - OUT

VIDEO

CH3 CH4

Center speaker

To COAXIAL DIGITAL

AUDIO OUT jack

Front speaker

(right)

Front speaker

(left)

Dolby Digital decoder

To COAXIAL DIGITAL

AUDIO INPUT jack

Subwoofer

Surround

speaker

(left)

Surround

speaker

(right)

[Fig. 5]

Notes

¡Be sure to turn off the power to all components in the system before connecting another component.

¡Refer to the Owner’s Manuals for the components to be connected to the DVD/VCR.

¡If the output is Dolby Digital audio, connect to a Dolby Digital decoder, and set Dolby Digital to on for audio

output in the setup mode.

¡Unless connected to a Dolby Digital decoder, set Dolby Digital to off for audio output in the setup mode.

Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol are

trademarks of Dolby Laboratories.

CONNECTING TO AN ANALOG AUDIO

DVD/VCR

OUT

ANT - IN

AUDO

DVD/VCR

AUDIO OUT

DIGITAL AUDIO OUT

PCM / BITSTREAM

COAXIAL

S-VIDEO

OUT

ANT - OUT

VIDEO

CH3 CH4

Stereo system

To Right (red) and Left (white)

AUDIO OUT jacks

[Fig. 6]

To ANALOG AUDIO INPUT jacks

Notes

¡Be sure to turn off the power to all components in the system before connecting another component.

¡Refer to the Owner's Manuals for stereo systems and any other components to be connected to the DVD/VCR.

–

_{Download from Www.Somanuals.co}1_m6_{. All Manuals Search And Download.}

1L25

SETUP

AUTOMATIC CHANNEL SET UP

5 Begin channel preset by pressing the F.FWD

button once. The tuner scans and memorizes

all active channels in your area.

VCR

The DVD/VCR can automatically program the tuner to

scanonlythe channels which are available in your area.

¡The DVD/VCR distinguishes

CH 01

¡Channel memory programming is NOT needed

when the DVD/VCR is connected to a cable box or

a satellite box as in "DVD/VCR TO TV CONNEC-

TION" on page 14. In this case, set the CH3/CH4

Switch (which is located on the back of your VCR)

to either CH3 or CH4, whichever is not used for nor-

mal broadcasts in your area. Then set your TV to the

same channel. The channel you want to record or

view will be selected from the cable or the satellite

box.

between standard TV channels

and cable channels.

AUTO SET UP

After scanning, the tuner stops on the lowest

memorized channel.TheTV screen returns to

TV mode.

¡If “AUTO SET UP” appears on the TV screen again,

check the cable connections. Press the F.FWD but-

ton once again and the DVD/VCR will begin preset

again.

¡Follow the steps below once. Repeat only if there is

a power failure or if the DVD/VCR is unplugged for

more than 30 seconds. (In these cases, the pro-

grammed channels are erased.)

TO SELECT A DESIRED CHANNEL

You can select the desired channel by using the

CHANNEL buttons (o/p) or by directly pressing the

Number buttons on the remote control.

¡You must follow the steps below before attempting to

play or record a video tape.

Note for using the Number buttons:

You need to connect the antenna or cable to

the DVD/VCR first. Then, connect the DVD

/VCR power plug to a standard AC outlet.

¡When selecting cable channels which are higher than

99, press the +100 button first, then press the last two

digits.

¡You must precede single-digit channel numbers with

a zero (For example: 02, 03, 04 and so on).

Turn on the TV and set the TV to channel 3 or

¡Now set the CH3/CH4 switch on the back of the

DVD/VCR to match the channel selected on the TV.

TO PRESET THE CHANNELS AGAIN

Press the MENU button until the main menu

appears. (If you have already set the clock,

you only have to press it once. If not, you

have to press it twice).

Turn on the DVD/VCR by pressing the

POWER button. Both the POWER and the

VCR/TV light will come on.

Select “CHANNEL SET UP” by pressing the

PLAY or the STOP button. Then, press the

F.FWD button.

Select the On Screen Language (“ENGLISH”,

“FRANCAIS” or “ESPAÑOL”) by pressing the

PLAY or the STOP button.

Then, press the F.FWD but-

ton.

Select “AUTO SET UP” by pressing the PLAY

or the STOP button. Then, press the F.FWD

button.

¡After scanning, the tuner stops on the lowest memo-

rized channel.

–

_{Download from Www.Somanuals.co}1_m7_{. All Manuals Search And Download.}

1L25

TO ADD/DELETE CHANNELS

CLOCK SET UP

When scanning, some channels may be skipped due to

a weak signal. In such cases, you can add the channels

to the DVD/VCR memory manually.

VCR

Set the clock accurately for proper automatic timer

recording. We suggest that you use a TV or radio sta-

tion as your time source.

Press the MENU button until the main menu

appears. (If you have already set the clock,

you only have to press it once. If not you

Press the MENU button twice to call up the

main menu. (If you have already set the

clock, you only have to press it once).

have to press it twice).

- MENU -

TIMER PROGRAMMING

[OFF]

AUTO REPEAT

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

[ON]

TV STEREO

SAP

¡If the clock is not set, the CLOCK SET menu

appears first. In this case, follow step [3].

Select "CHANNEL SET UP" by pressing the

PLAY or the STOP button. Then, press the

F.FWD button.

Select "CLOCK SET" by pressing the PLAY

or the STOP button. Then, press the F.FWD

button

Select "MANUAL SET UP" by pressing the

PLAY or the STOP button. Then, press the

F.FWD button.

Set the clock.

1) Set the month

Press the PLAY button or the STOP button repeatedly.

Then, press the F.FWD button.

Enter the desired channel number by press-

ing the PLAY or the STOP button.

2) Set the day

Add or Delete it from memory by pressing the

F.FWD or the REW button so that "ADD" or

"DELETE" flashes on the TV screen accord-

ingly.

Press the PLAY button or STOP repeatedly.

Then, press the F.FWD button.

3) Set the year

Press the PLAY button or the STOP button repeatedly.

Then, press the F.FWD button.

The day of the week will appear automatically.

Exit the Preset mode by pressing the

CLEAR/C.RESET button.

4) Set the hour

TO CHANGE THE ON-SCREEN

LANGUAGE

Press the PLAY button or the STOP button repeatedly.

Then, press the F.FWD button.

VCR

5) Set the minute

Press the MENU button twice to call up the

main menu. (If you have already set the

clock, you only have to press it once).

Press the PLAY button or the STOP button repeatedly.

Then, press the F.FWD button.

Select "LANGUAGE SELECT" by pressing

the PLAY or the STOP button.Then, press the

F.FWD button.

6) Set AM or PM

CLOCK SET

MONTH DAY

YEAR

Press the PLAY button or the

STOP button repeatedly.

03 18 MON 2002

HOUR MINUTE AM/PM

PM AM

Select "ENGLISH", "FRANCAIS" or

"ESPAÑOL" by pressing the PLAY or the

STOP button. Then, press the

¡To go back one step, press the REW button.

CLEAR/C.RESET button.

Start the clock by pressing the

CLEAR/C.RESET or the F.FWD button.

–

_{Download from Www.Somanuals.co}1_m8_{. All Manuals Search And Download.}

1L25

PLAYBACK FUNCTION

NORMAL PLAYBACK

Select "AUTO REPEAT" by pressing the

PLAY or the STOP button.

VCR

Begin auto repeat playback by pressing the

F.FWD button so that [ON] appears next to

"AUTO REPEAT".

Insert a prerecorded tape. The DVD/VCR will

turn on, and the VCR/TV Light

and the CST IN Light comes

on.

¡If the on-screen menu still remains, press the

CLEAR/C.RESET button to exit the menu.

¡If the safety tab has been removed, the DVD/VCR

will start playback automatically.

To cancel the Auto repeat mode, press the F.FWD button at

step [3] so that [OFF] appears next to "AUTO REPEAT".

SEARCH FUNCTIONS

Turn on theTV and set theTV to channel 3 or 4.

¡Now set the CH3/CH4 switch on the back of the

VCR

DVD/VCR to match the channel selected on the TV.

PICTURE SEARCH

3 Begin playback by pressing the PLAY button.

If you want to skip or repeat a scene during playback,

press the F.FWD or the REW button.

¡Tracking adjustment will be done automatically

(Digital Tracking function) when you start playback.

To adjust the tracking manually, press the CHAN-

NEL buttons (o/p) on the DVD/VCR.

¡Press it again and the DVD/VCR will now search at

super high speed. (in the LP/SLP modes only).

INDEX SEARCH

The index signal is recorded on the tape automatically

when the recording is started. If you want to view a

recording at a specific start point, this can be done easily.

¡When a tape has reached the end, the DVD/VCR

will automatically rewind the tape to the beginning,

and eject the tape.

Press the SEARCH MODE button so that the

Index Search menu appears.

¡S-VHS Quasi Playback (SQPB): This unit allows

you to view a tape recorded in S-VHS format.

(Noise lines may appear on the picture.)

Enter your desired number by pressing the

PLAY or the STOP button

INDEX SEARCH

To stop playback, press the STOP button.

within 30 seconds.

PAUSE/STILL/SLOW

You can freeze the picture on TV screen by pressing

the PAUSE button during playback.

¡You can advance the picture one frame at a time by

pressing the PAUSE button during the Still mode.

¡If the picture begins to vibrate vertically during the

still mode, stabilize the picture by pressing the

CHANNEL buttons (o/p).

¡If the picture is distorted or rolling vertically, adjust

the vertical hold control on your TV, if so

equipped.You can watch in the slow motion by

pressing the SLOW button during playback or the

still mode.

¡If a noise bar appears on the TV screen, you can

reduce it by pressing the CHANNEL buttons (o/p).

¡After the DVD/VCR has been in Still/Slow mode for

5 minutes, it will stop automatically to protect the

tape and the video head from damage.

Press the F.FWD or the REW button to start

index search.

¡If you want to go in the forward direction, press the

F.FWD button. If you want to go in the reverse

direction, press the REW button.

¡After index search, the DVD/VCR will play the tape

automatically.

TIME SEARCH

This feature allows you to fast forward or rewind the

tape for the desired length of time.

Press the SEARCH MODE button twice so

that the Time Search menu appears.

Enter your desired time to

skip by pressing the PLAY

TIME SEARCH

2 : 50

or the STOP button within

30 seconds.

¡To return to playback, press the PLAY button.

Press the F.FWD or the REW button to start

time search.

AUTO REPEAT PLAYBACK

VCR

If you want to go in the forward direction, press the

F.FWD button.

¡If you want to go in the reverse direction, press the

REW button.

This feature allows you to play a tape over and over.

¡After time search, the DVD/VCR will play the tape

automatically.

Select main menu by pressing the MENU

button.

–

_{Download from Www.Somanuals.co}1_m9_{. All Manuals Search And Download.}

1L25

RECORDING FUNCTION

VCR VCR

It may be UNLAWFUL to record copyrighted materi-

If a tape ends during OTR, the VCR will stop, eject the

al without the consent of the copyright owner.

Accidental Erasure Prevention

tape, and switch to the DVD mode automatically as the

TIMER SET light blinks. (If the DVD power is off, the

DVD/VCR will become STANDBY status).

To prevent accidental recording on a

recorded cassette, remove its record

safety tab. To record on it later, cover the

When OTR is finished , the VCR turns off automatically.

To use the VCR again, press the TIMER SET button on

the DVD/VCR.

Record safety tab

hole with cellophane tape.

Before recording, make sure:

¡The desired channel is selected by pressing the

Number buttons on the remote control or the

CHANNEL buttons (o/p). (If you connected the

DVD/VCR to a cable box or satellite box as in

"DVD/VCR TO TV CONNECTION" on page 14,

set the DVD/VCR to channel 3 or 4 i.e. the same

channel as the CH3 or CH4 switch on the back of

the DVD/VCR. Then, select the channel you want

to record with the cable box or satellite box. In this

case, you can ONLY record and view the SAME

channel.)

TIMER RECORDING

VCR

You may set the DVD/VCR to start recording while

you are away. You can set seven programs to record on

specific days, daily or weekly within a 1 year period.

If you have not yet set the clock, "CLOCK SET"

appears. If so, follow the steps [3] and [4] in

"CLOCK SET" section on page 18. Then, set the

timer recording.

¡There is a tape with a safety tab into the DVD/VCR.

¡The desired recording speed is selected in SP (stan-

dard play) or SLP (super long play) mode by press-

ing the SPEED button on the remote control.

Insert a tape with its safety tab intact.

Press the MENU button.

Select "TIMER PROGRAMMING" by pressing the

Tape Speed

Recording/Playback Time

PLAY or the STOP button. Then,

press the F.FWD button. The set

up screen is displayed.

Type of tape

SP mode

SLP mode

T60

1 hour

3 hours

T120

2 hours

6 hours

T160

2-2/3 hours

8 hours

TIMER PROGRAMMING

PROG.

DATE

START TIME

END TIME

1234567

CHANNEL

REC SPEED

¡TV STEREO or SAP is selected.

VIEWING AND RECORDING

THE SAME PROGRAM

Set the timer.

¡If you make mistakes, press the REW button repeat-

edly to go back to the item you want to correct.

VCR

¡If you press the REW button after step ), all the

information you’ve just entered for that program

Begin the recording by pressing the RECORD

button. The REC/OTR Light comes on.

number will be cleared.

To temporarily stop recording or to resume it, press the

PAUSE button. After the DVD/VCR has been in Pause

mode for 5 minutes, it will stop automatically to protect

the tape and the video head from damage.

1) Set the program number (1-7)

PROGRAM NUMBER

DATE - - / - -

START TIME - - : - - - -

END TIME - - : - - - -

CHANNEL - -

REC SPEED - -

A program number which is not allocated

flashes. Press the PLAY button or the

STOP button repeatedly for the desired

Press the STOP button when the recording is

completed.

program number. Then, press the F.FWD button.

If a tape ends during recording, the VCR will automati-

cally stop, rewind, and eject the tape.

2) Set the frequency of the recording

OTR (One Touch Recording)

Press the PLAY button or the STOP

PROGRAM NUMBER

button to select the desired frequency from

ONCE, DAILY, or WEEKLY recording.

Then, press the F.FWD button.

ONCE

DAILY

WEEKLY

VCR

This feature allows you to set the recording length simply by

pressing the REC/OTR button on the DVD/VCR.

ONE TIME PROGRAM

3) Set the date

PROGRAM NUMBER

Press the REC/OTR button to begin OTR. The

REC/OTR Light comes on. Change the recording

length by pressing the REC/OTR button repeatedly.

DATE

- - / - - - -

- - : - - - -

- -

START TIME

First, press the PLAY button or the STOP

button for the month. Then, press the F.FWD

button. Next, press the PLAY button or the

END

TIME

CHANNEL

REC SPEED

- -

REC

OTR(0:30)

OTR(1:00).....

STOP button for the day. Then, press the F.FWD button.

(Normal recording)

OTR(8:00)

OTR(7:30)

–

_{Download from Www.Somanuals.co}2_m0_{. All Manuals Search And Download.}

1L25

If a tape is not in the DVD/VCR or does not have a safety

tab, the TIMER SET light flashes and timer recording

will not operate. Please insert a recordable tape.

ONE TIME PROGRAM

4) Set the start time

PROGRAM NUMBER

05 /13 MON

- - : - - - -

- -

DATE

START TIME

First, press the PLAY button or the STOP

button for the hour. Then, press the

F.FWD button. Next, press the PLAY

END

TIME

CHANNEL

When all timer recordings are finished, the TIMER

SET light will flash. To use the DVD/VCR again as

usual, press the TIMER SET button to disable the

flashing TIMER SET light, then press the VCR/TV

button to select the VCR position. The VCR/TV light

will appear. Press the VCR button to choose VCR or

DVD mode, then continue with the other features as

described in this manual.

When timer recordings are set, the TIMER SET light

will come on. To use the DVD/VCR as usual until the

time for the recording, press the TIMER SET button

so that the TIMER SET light disappears. Press the

VCR/TV button to choose the VCR position. The

VCR/TV light will come on. Press the VCR button to

choose VCR or DVD modes, then continue with the

other features as described in this manual.

REC SPEED

- -

button or the STOP button for the minute. Then, press the

F.FWD button. And then, press the PLAY button or the

STOP button for AM or PM. Then, press the F.FWD button.

ONE TIME PROGRAM

5) Set the end time

PROGRAM NUMBER

DATE

05 /13 MON

07: 30 PM

- - : - - - -

- -

START TIME

Follow the same instructions as

"Set the start time" to set

the end time.

END

TIME

CHANNEL

REC SPEED

- -

ONE TIME PROGRAM

6) Set the channel number

PROGRAM NUMBER

DATE

05 /13 MON

07: 30 PM

08: 30 PM

- -

START TIME

Press the PLAY button or the STOP

button repeatedly for the desired channel

number. Then, press the F.FWD button.

END

TIME

CHANNEL

REC SPEED

- -

If you want to use the DVD player during

a VCR timer recording or while the TIMER

SET light is on or flashes.

If you connected the DVD/VCR to a cable box or satellite box

as in "DVD/VCR TO TV CONNECTION" on page 14, set the

DVD/VCR to channel 3 or 4 i.e. the same channel as the CH3

or CH4 switch on the back of the DVD/VCR. Then, select the

channel you want to record with the cable box or satellite box.

Leave the cable box or satellite box on for timer recording.

You can use the DVD player while the TIMER SET

light is on or flashes, or during a timer recording. Press

the POWER button to turn on the DVD/VCR. Press

the VCR/TV button to choose VCR position. Press the

DVD button on the remote control to choose DVD

mode, then continue with the other DVD features as

described in this manual. You don’t have to set the

TIMER off to use the DVD.

ONE TIME PROGRAM

7) Set the tape speed

PROGRAM NUMBER

DATE

05 /13 MON

07: 30 PM

08: 30 PM

START TIME

Press the PLAY button or the STOP

button repeatedly for the desired tape

speed. Then, press the F.FWD button.

END

TIME

CHANNEL

REC SPEED

SLP

TO STOP AN AUTOMATIC TIMER PRO-

GRAM ALREADY STARTED

Press the STOP/EJECT or the TIMER SET button on

the DVD /VCR.

To set another program, repeat step [4]. To exit

from the set up screen, press the

CLEAR/C.RESET button (You only exit from the

set up screen. the information you entered for

the timer recording will not be cleared).

TO CHECK, CORRECT, OR CANCEL AN

AUTOMATIC TIMER PROGRAM

When you finish programming, press the

TIMER SET button to activate the timer.

¡As the TIMER SET light comes on the VCR

becomes STANDBY status, and switches to DVD

OUTPUT mode automatically.

Turn the power on by pressing the POWER

button. (If the DVD/VCR is in TIMER STAND-

BY status, press the TIMER SET button

instead of the POWER button.)

¡When DVD sits idle for more than thirty-five min-

utes, the DVD power will be turned off automatical-

ly. If you press the TIMER SET button under such

condition, the DVD/VCR power will be turned off

and become STANDBY status.

Select main menu by pressing the MENU

button.

Select "TIMER PROGRAMMING" by press-

ing the PLAY or the STOP button. Then,

press the F.FWD button.

TO CLEAR A PROGRAM

Follow the steps from 2 to 3. Select the program num-

ber you want to clear, and then press the REW button.

Select the program number which you want

to check by pressing the PLAY or the STOP

button.

HINTS FOR TIMER

RECORDING

¡The details of the selected program appears on the

TV screen.

VCR

¡Go to the digit you want to change by pressing the

F.FWD or the REW button. Then, enter correct num-

bers by pressing the PLAY or the STOP button.

¡You may cancel the entire program by pressing the

REW button while the program number flashes.

¡If there is a power failure or the DVD/VCR is

unplugged for more than 30 seconds, the clock set-

ting and all timer settings will be lost.

¡If a tape ends during TIMER RECORDING, the

VCR will stop, eject the tape, and switch to the DVD

mode automatically as the TIMER SET light blinks.

(If the DVD power is off, the DVD/VCR will

become STANDBY status).

Press the CLEAR/C.RESET button to exit.

Press the TIMER SET button to return to

timer stand-by mode.

–

_{Download from Www.Somanuals.co}2_m1_{. All Manuals Search And Download.}

1L25

SPECIAL FEATURES

¡Always use video-quality shielded cables with

RCA-type connectors. Standard audio cables are not

recommended.

¡You can use a video disc player, satellite receiver, or

other audio/video component with A/V outputs in

place of the playing VCR.

COPYING A VIDEO TAPE

VCR

You can make copies of video tapes made by friends or

relatives for your enjoyment.

Warning:

Unauthorized recordings of copyrighted video tapes

may be an infringement of copyright laws.

Connect the recording DVD/VCR (this unit), the play-

ing VCR (another source) and your TV using the fol-

lowing diagram.

TO MONITOR THE RECORDING

Turn on theTV and set theTV to channel 3 or 4.

¡Now set the CH3/CH4 switch on the back of the

DVD /VCR to match the channel selected on the TV.

¡You can use the AUDIO/VIDEO input jacks on the

front panel of the DVD/VCR instead of using the

jacks on the back.

Press the VCR/TV button on the recording

VCR so that the VCR/TV Light comes on.

[Recording VCR]

(this unit)

MTS (Multi-Channel Television

Sound) SYSTEM

DVD/VCR

OUT

ANT - IN

AUDO

DVD/VCR

AUDIO OUT

DIGITAL AUDIO OUT

S-VIDEO

OUT

VCR

PCM BITSTREAM

COAXIAL

ANT - OUT

VIDEO

3CH 4CH

When you play a VHS tape, or receive a broadcast on the

DVD/VCR tuner channel you are watching, the current

status will appear when you press

Coaxial cable

Audio/Video cables

(not supplied)

(supplied)

STOP

12:00AM

CH 32

STEREO

SAP

the DISPLAY button on the

remote control. When you record a

MTS broadcast signal, you need to

set it to MTS mode.

[TV set]

(Use for monitoring)

1)*

OUT

LEFT RIGHT

0:00:00

HIFI

2)*

AUDIO

VIDEO

[Playing VCR]

(another source)

1)* When a program is broadcast in stereo,

ANT in

STEREO appears. When a program is

broadcast in second audio, SAP appears.

Although a program may be broadcast in both stereo

and sub audio, you must select the Recording mode to

TV STEREO or SAP before you record a broadcast.

Insert a pre-recorded tape into the playing

VCR.

Insert a tape with a safety tab into the

recording VCR.

2)* While the VCR is set in HiFi stereo mode,

HiFi appears on the TV screen. While the

VCR is set in monaural (MONO) mode,

HiFi disappears from the TV screen.

Press the SPEED button on the recording

VCR to select the desired recording speed

(SP/SLP).

¡If you play non-HiFi tapes while the VCR is set in

HiFi, HiFi will disappear from the TV screen and the

VCR will automatically play in monaural.

When you use the A/V input jacks on the back of the

DVD/VCR, select "L1" position by pressing [0], [0], [1]

on the remote control or the CHANNEL buttons (o/p).

When you use the A/V input jacks on the front of the

DVD/VCR, select "L2" position by pressing [0], [0], [2]

on the remote control or the CHANNEL buttons (o/p).

MTS RECORDING/MONITOR MODE

Display on the

TV screen

Type of

STEREO/SAP

Selection

Hi-Fi audio track

(2-channel)

Normal audio

track

broadcast

L-channel R-channel

Regular

-None-

-Invalid-

Note

(monaural audio)

Mono

L+R

“L1” and “L2” are found before the lowest memo-

rized channel. (Example: CH2)

Stereo

broadcast

STEREO

SAP

-Invalid-

TV STEREO*

SAP*

Main audio Main audio Main audio

program

Bilingual

broadcast

Sub audio Sub audio

Sub audio

program

Press the REC/OTR button on the recording VCR.

program

TV STEREO*

SAP*

L+R

Sub audio

program

Stereo &

Bilingual

broadcast

STEREO

SAP

Begin playback of the tape in the playing

VCR.

Sub audio Sub audio

program program

¡For best results during dubbing, use the

DVD/VCR’s front panel controls whenever possi-

ble. The remote control might affect the playing

DVD/VCR’s operation.

–

_{Download from Www.Somanuals.co}2_m2_{. All Manuals Search And Download.}

1L25

AUTO REWIND

REAL TIME TAPE COUNTER

When a tape reaches the end during recording, play-

back, or fast-forward, the tape will automatically

rewind to the beginning. After rewinding finishes, the

DVD/VCR will eject the tape and switch itself off.

¡The DVD/VCR will not rewind the tape automati-

cally during timer recording or One Touch

Recording.

¡This shows the elapsed recording or playback time

in hours, minutes, and seconds. (The displayed time

will not change during blank portions of the tape.)

¡The indication will appear when the tape is rewound

further than “0:00:00” on the tape counter.

PLAYING A DISC

Notes

PLAYING A DVD VIDEO

OR AN AUDIO CD

¡A “prohibited icon” may appear at

the top-right on the TV screen

during operation, warning that a

prohibited operation has been

encountered by the DVD/VCR or

the disc.

DVD

Getting started

Turn on the power of the TV, amplifier and any other

components which are connected to the DVD/VCR.

(Change the input system to suite the DVD/VCR, and

check that the sound volume is correct).

¡If a disc is dirty or has scratches, the pictures may

appear distorted and the playback operation may

stop. In such cases, clean the disc and unplug the

power cord and then plug it again before resuming

playback.

Press the POWER button.

¡The power will turn on.

¡With DVDs that use titles for playback program

signals, playback may start from the second title, or

it may skip these titles.

Check that the DVD OUTPUT Light is lit. If not

press the DVD button on the remote control to

switch to DVD/VCR mode.

¡During the playback of a two layered disc, pictures

may stop for a moment. This happens when the 1st

layer switches to the 2nd layer. This is not a mal-

function.

Press the OPEN/CLOSE button.

¡The disc loading tray will open.

Place a disc into the tray.

USING THE DVD MENUS

¡Make sure the disc is sitting properly in the correct

recess, with the label side up.

DVD

Some DVDs contain their own menus, such as a guid-

ance menu which describes the contents of the disc or

a selection menu for sound, language and other cus-

tomized settings.

Press the MENU button.

Press the PLAY button.

¡The DVD menu will appear.

¡The tray will close automatically, and playback will

then start from the first chapter or track of the disc.

You need to press the PLAY button only when the

tray has been closed by pressing the OPEN/CLOSE

button.

Select the desired title.

¡Press the Arrow buttons (L/K/B/s) to change the

setting, and then press the ENTER button.

¡If your DVD has a title menu, it may appear on the

screen. In this case, refer to “USING THE DVD

MENUS” in the next section, or “USING THE

TITLE MENU” on page 24.

Playback will start from the selected title.

Press the STOP button to stop play.

–

_{Download from Www.Somanuals.co}2_m3_{. All Manuals Search And Download.}

1L25

RESUMING PLAYBACK FROM

THE POINT WHERE

USING THE TITLE MENU

PLAYBACK STOPPED

DVD

With a DVD containing a title menu, you can select the

desired titles from the menu.

Press the STOP button during playback.

Press the TITLE button.

¡Playback will stop, and then appear the resuming

message at the center.

¡The title menu will appear.

¡With some discs, a title menu may appear automati-

cally. In this case, skip to step 2.

Press 'PLAY' to play from here.

To play the beginning, press 'STOP' first

and then 'PLAY'.

Select the desired title.

¡Press the Arrow buttons (L/K/B/s) to select a

desired title, and then press the ENTER button.

CALLING UP A MENU SCREEN

DURING PLAYBACK

For DVDs

Press the PLAY button. Playback will start

from the point where the previous playback

session was stopped.

¡Press the MENU button to call up the DVD menu.

¡Press the TITLE button to call up the title menu.

Note

¡The contents of menus and corresponding menu

operations may vary between discs. Refer to the

manual accompanying the disc for details.

¡The resume function can be reset by pressing the

STOP button twice or by opening the disc loading

tray.

PAUSING PLAYBACK OR

DISPLAYING A STILL PICTURE

STEPPING THROUGH FRAMES

DVD

Press the PAUSE button during playback.

Press the PAUSE button while playback is

¡Playback will pause, with sound

muted.

paused.

¡The next picture frame is dis-

played with sound muted each

time the button is pressed.

Press the PLAY button to resume playback.

–

_{Download from Www.Somanuals.co}2_m4_{. All Manuals Search And Download.}

1L25

STARTING FROM A DESIRED

TRACK

FAST FORWARD/REVERSE

DVD

Press the FWD g or the REV h button

during playback.

Press the Number buttons to enter the

desired track number.

¡For DVDs, pressing the FWD g or REV h but-

ton cycles the playback speed in four steps. In the

case of DVDs, the sound will mute.

¡For audio CDs, the playback speed is fixed at ×16.

The selected track will be located, and playback will start.

You can also press the SEARCH

MODE button and use the Number

buttons to enter the track number.

REV

Button

FWD

Button

When the track number is entered in the entry box,

playback of the desired track will start automatically.

TRICKS WITH THE SKIP BUTTONS (H, G)

If the SKIP button G is pressed during playback

or while playback is paused, the current track will

be skipped and the next track will start. If the SKIP

button H is pressed once, the beginning of the

current track will be located for replay. If the SKIP

button H is pressed again within 2 seconds

after playback begins, the previous track will be

located.

x30

x60

x30

x60

PLAYING FROM A DESIRED

TITLE OR A CHAPTER

Press the PLAY button to return to normal

playback speed.

DVD

There are two ways you can jump to a desired title or

a chapter.

SLOW MOTION

DVD

By using the ‘SEARCH MODE’ button.

Press the FWD g button while playback is

paused. (Sound remains muted.)

Press the ‘SEARCH MODE’ button.

¡The title/chapter search display will be displayed.

¡Slow motion mode will be activated.

TT : 1/ 2

TT : _/ 12

¡Pressing the FWD g button cycles the playback

speed in three steps. Select the appropriate speed

while referring to the speed indication on the screen.

CH __ / 49

CH : 12/ 49

FWD

Button

If you wish to perform a title search, select

‘TT’. If you wish to perform a chapter search,

select ‘CH’ with the Arrow buttons (K/L).

×1/16

Enter the desired title or chapter number

with the Number buttons (If you are entering

a single digit number press “0” first).

×1/8

¡When you finish entering the number, the selected

title or chapter will start automatically

Notes

×1/2

¡If you didn’t press “0” before entering the single

digit number, you have to press ENTER to go to the

desired title or the chapter.

Press the PLAY button to return to normal

playback speed.

Notes

¡Slow playback is not available with audio CDs.

¡Reverse slow motion is not available.

¡Slow playback from a TITLE to other TITLE is not

possible.

–

_{Download from Www.Somanuals.co}2_m5_{. All Manuals Search And Download.}

1L25

By using only the

TITLE SEARCH:

MARKER

Directly enter the desired title number with the

Number buttons with playback stopped.

DVD

CHAPTER SEARCH:

You can define the part to be called back.

Directly enter the desired chapter number

with the Number buttons when the disc is

being played or paused.

Press the SEARCH MODE button three

times during playback.

¡When you finish entering the number, the selected

1 2 3 4 5 AC

NOT SET

title or chapter will start automatically.

Set the marker

¡Using the Arrow buttons (s/B),

position the cursor on to the

marker number shown as “NOT SET”. Press the

ENTER button when the screen to be reviewed

appears. The marked time will be displayed. Up to

5 points can be marked.

Notes

¡Play back from a desired title or chapter is not avail-

able with some DVDs.

¡If the title being played does not display the chapter

number, that means the chapter search function is

not available with that title.

TRICKS WITH THE SKIP BUTTONS (H, G)

Call back the marker

¡Using the Arrow buttons (s/B), position the cursor

on to the marker number to be called back and press

the ENTER button.

If the SKIP button G is pressed during playback or

while playback is paused, the current chapter will be

skipped and the next chapter will start. If the SKIP

button H is pressed once, the beginning of the cur-

rent chapter will be located for replay. If the SKIP

button H is pressed again within 2 seconds after

playback begins, the previous chapter will be locat-

ed.

Clear the marker

¡Using the Arrow buttons (s/B), position the cursor

on to the marker number to be cleared and press the

CLEAR/C.RESET button.

To clear all markers, place the cursor on “AC” (All

clear markers) and press the ENTER button.

STARTING FROM A DESIRED

TIME COUNT

Press the SEARCH MODE button or the

RETURN button to exit the display.

DVD

RANDOM (Audio CD)

Press the SEARCH MODE button twice dur-

ing playback or while paused.

Press the MODE button in stop mode.

Press the Number buttons to set the desired

¡The program setting menu screen will appear.

time count.

TIME 1:23:30

TOTAL 1:29:00

¡Example: 1 hour, 23 minutes and

30 seconds

Press the MODE button again.

1 → 2 → 3 → 3 → 0

RANDOM

Notes

¡For a DVD, Time Search in Title is effective. (But

Time Search in Chapter is ineffective.)

START : PLAY

EXIT : MODE

¡For a CD, Time Search in Track is effective. (But

Time Search in the entire disc is ineffective.)

¡Playback from a desired time count is not available

with some discs or if the unit is in stop mode.

¡If the wrong numbers are entered, press the

CLEAR/C.RESET button and re-enter the correct

numbers.

Press the PLAY button. Random playback

will then start.

Note

¡Program playback is not available during random

playback.

–

_{Download from Www.Somanuals.co}2_m6_{. All Manuals Search And Download.}

1L25

REPEAT

A-B REPEAT

DVD

Press the REPEAT button during playback.

You can define a section to be played back repeatedly.

For DVDs

Press the A-B REPEAT button during playback.

¡A single title or chapter can be played back repeat-

edly.

REPEAT

¡The starting point (A) will then be

selected.

[ A -

]

¡Pressing the REPEAT button cycles the display on

the screen as follows.

REPEAT

[OFF]

No repeat playback.

Press the A-B REPEAT button again at the

end point (B) of the desired section.

REPEAT

[CHAPTER]

The current chapter is

¡The selected section will be

played back repeatedly.

REPEAT

[ A - B ]

REPEAT

[TITLE]

The current title is

played back repeatedly.

To exit A-B repeat playback, press the A-B

For audio CDs

REPEAT button and set it to OFF.

REPEAT

[ OFF ]

¡The whole disc or a single track can be played back

repeatedly.

¡Pressing the REPEAT button cycles the display on

the screen through Off, Track and All.

Notes

¡With DVDs, the A-B repeat section can be set only

within the current title.

REPEAT

[OFF]

No repeat playback.

¡With audio CDs, the A-B repeat section can be set

within the current track.

REPEAT

[TRACK]

The current track is

played back repeatedly.

¡A-B repeat is not available with some scenes in

DVD.

REPEAT

[ALL]

The whole disc is

played back repeatedly.

¡To cancel the A point which was set, press the

CLEAR/C.RESET button.

¡A-B repeat playback does not function when title,

chapter, or repeat (all) playback has been set.

If the REPEAT button is pressed once dur-

ing program/random playback, the current

track will be played back repeatedly.

If the REPEAT button is pressed again, the

program/random playback will be per-

formed repeatedly.

Notes

¡Repeat playback is not available with some discs.

¡The REPEAT setting will be cleared when moving

to an other title, chapter or track.

¡Repeat playback does not function during A-B

repeat playback.

–

_{Download from Www.Somanuals.co}2_m7_{. All Manuals Search And Download.}

1L25

ZOOM PLAYBACK

PROGRAM (Audio CD)

(enlargement on-screen)

DVD

Images can be enlarged on the screen to your taste.

Press the MODE button in stop mode.

¡The program screen will appear.

Press the ZOOM button during playback.

PROGRAM

TIME 0:00:00 1/1

¡The image will be enlarged at the center of the

screen.

¡Pressing the ZOOM button cycles the zooming

START: PLAY

DELETE

CLEAR

RETURN

RANDOM

MODE

EXIT

images in two steps.

Press the Number buttons to enter the

desired track numbers.

ZOOM [x2]

ZOOM [x4]

ZOOM [OFF]

PROGRAM

TIME 2:07:43 1/1

02 05 07 04 10 14 06 15 21 08

20 28 10 25 35 12 30 42 11 34

¡50 programs can be displayed

at once on the screen. Press

“L” to go to the next page.

49 16 40 58 18 45 63 01 03

START: PLAY

RANDOM MODE

DELETE

EXIT

CLEAR

RETURN

When the Arrow button (K/L/s / B) is

pressed during zoom play, the part to be

zoomed moves.

Press the PLAY button.

¡The zooming frame can be moved from the center 4

steps to the right, 4 steps to the left, 4 steps to the

top, and 4 steps to the bottom when times 2 zoom-

ing. The frames will move 6 steps when times 4

zooming.

¡Playback will start in the programmed order.

¡While the program is being played back, the STOP

button works as follows.

¡Press the STOP button once and then press the

PLAY button again. Playback will restart from the

point where the STOP button was pressed. (Program

continued)

¡The current position will be displayed on the right-

bottom of the screen. Press the ENTER button, and

the display will disappear.

TO CLEAR THE PROGRAM

Press the STOP button twice, and the pro-

gram will be cleared.

Notes

¡Adding programs is not possible during program

playback. You must stop the current playback before

such operations can be carried out.

¡Press the CLEAR/C.RESET button to cancel a pro-

gram. The most recently entered program will then

be deleted.

Note

¡Zooming function does not work while the disc

menu is being shown.

¡Up to 99 programs can be entered.

¡Playback from a desired track and random playback

are not available during program playback.

¡Program settings will be cleared when the power is

turned off or the disc loading tray is opened.

¡Press the MODE button to check the programmed

setting.

¡The programs will be cleared when you turn the

power off.

–

_{Download from Www.Somanuals.co}2_m8_{. All Manuals Search And Download.}

1L25

CHANGING THE ON-SCREEN

DISPLAY DURING MP3 DISC PLAY

PLAYING AN MP3 DISC

MP3

The information on an MP3 disc in play can be

checked.

Insert an MP3 file recorded on disc.

¡The MP3 menu screen is displayed.

Press the DISPLAY button during playback.

¡Folders are referred to as

“Albums” and files are

referred to as “Tracks”.

VOLUME LABEL

¡The track currently being

played will be highlighted.

ALBUM NAME

FIRST PLAY

+ALBUM01

+ALBUM02

+ALBUM03

+ALBUM04

TRACK11

TRACK12

TRACK13

TRACK14

TRACK15

1/15

¡“+” appears at the beginning

SELECT:

RETURN:

ENTER:

START

of the album name.

PLAY

¡If all the tracks cannot be displayed at once on the

screen, “L” appears to go to the next page. If there

is a previous page, “K” appears on screen. To the

left of “L”, the current page and the total number of

pages are displayed.

Press the DISPLAY button again.

¡The album name being displayed will be replaced by

the elapsed time of the track.

will be displayed when repeat play has been

¡The player can recognize 255 albums and tracks

altogether.

selected.

0:02:31

T: Track repeat

TRACK11

TRACK12

TRACK13

TRACK14

TRACK15

Using the Arrow buttons (K/L), select a

album or a track to be played.

A: Album (folder) repeat

D: Disc repeat

[When a TRACK is selected]

Starting from the selected track,

the rest of the tracks will be

played in order.

ALBUM01

+ALBUM11

+ALBUM12

+ALBUM13

+ALBUM14

+ALBUM15

Press the DISPLAY button again, and the dis-

play screen disappears.

SELECT:

RETURN:

ENTER:

START

PLAY

[When an ALBUM is selected]

Press the Arrow button (B). The track selection screen

shows up. Using the Arrow buttons (K/L), select the

tracks to be played.

¡Choose “FIRST PLAY”, and the albums and tracks

will be played from the beginning of the disc.

¡Press the TITLE button, and the top hierarchy will

be called back.

¡Albums can be played up to the 8th hierarchy.

Press the PLAY button.

¡Playback will start.

To stop playing, press the STOP button.

–

_{Download from Www.Somanuals.co}2_m9_{. All Manuals Search And Download.}

1L25

PLAYING A DESIRED TRACK

FROM AN MP3 DISC

PLAYING AN MP3 DISC IN A

PROGRAM

MP3

back.

ress the SEARCH MODE button during play-

Press the MODE button in STOP mode.

¡The program screen is displayed.

¡The SEARCH menu is displayed.

PROGRAM-FOLDER NAME

¡The track currently being played or in RESUME ON

will be highlighted. In the case of RESUME OFF,

the first track of the disc will be highlighted.

+ALBUM01

+ALBUM02

+ALBUM03

TRACK01

TRACK02

1/11

1/1

¡Press the RETURN button, and the SEARCH menu

disappears.

START

RANDOM: MODE

PLAY

DELETE: CLEAR

EXIT RETURN

ALBUM NAME

+ALBUM01

TRACK11

TRACK12

TRACK13

Use the Arrow buttons (L/K) to select a

track. Then press the ENTER button to save

it in a program.

TRACK14

1/15

SELECT:

RETURN:

ENTER:

START PLAY

PROGRAM - ALBUM01

+ALBUM11

+ALBUM12

TRACK11

TRACK12

TRACK13

TRACK11

Using the Arrow buttons (K/L), select the

track to be played. Then press the PLAY but-

ton to start playing.

1/11

1/1

START

PLAY

DELETE: CLEAR

RANDOM: MODE

EXIT

RETURN

Notes

¡When an album name is highlighted, press the

Arrow button (L), and the next hierarchy is dis-

played.

¡During play, a desired track can be searched for

directly. Just enter the track number with the

Number buttons.

¡Press the Arrow button (K) to go back to the previ-

ous hierarchy.

¡If the track number entered is not available, the “dis-

able” symbol appears and the direct search mode is

cancelled.

¡If the entire program cannot be displayed at once on

the screen, “L” appears to go to the next page.

¡Playback cannot be started from a desired time

count.

When the program has been selected, press

the PLAY button.

¡The program will begin.

PLAYING AN MP3 DISC

RANDOMLY

Notes

MP3

¡Press the CLEAR/C.RESET button, and the last-

programmed entry will be deleted.

Press the MODE button twice in STOP mode.

¡Press the RETURN button, and the program screen

will be displayed and the program stored in memo-

ry.

¡The random setting menu screen will appear.

RANDOM

¡The program setting will be cancelled when the

power is turned off or the disc tray is opened.

PROGRAM - ALBUM05

+ALBUM51

+ALBUM52

TRACK51

TRACK52

TRACK63

TRACK11

TRACK52

TRACK31

TRACK22

TRACK03

START

PLAY

EXIT: MODE

1/11

2/3

Press the PLAY button.

¡Random play will begin.

_{Download from Www.Somanuals.co}3_m0_{. All Manuals Search And Download.}

START

RANDOM: MODE

PLAY

DELETE:

EXIT

CLEAR

RETURN

–

1L25

SETTINGS

Notes

CHANGING THE AUDIO

LANGUAGE OR SOUND MODE

¡Pressing the Audio button may not work on some

DVDs with multiple audio languages (e.g. DVDs

which allow audio language setting on the disc

menu). Operation varies between discs, so refer to

the manual accompanying the disc.

DVD

The DVD/VCR has a function which allows you to

select the desired audio language and sound mode.

¡The current audio language and sound mode will be

displayed when you first press the AUDIO button.

For DVDs

¡If the desired language is not shown after pressing

the Audio button several times, the disc does not

have an audio source in that language.

Press the AUDIO button during playback.

¡The current audio status will appear at the top.

¡The audio language resets to the one which was

selected in the setup mode every time the power is

turned on or discs are replaced. If that language is

not available on a disc, a language defined by the

disc will be selected.

Press the AUDIO button repeatedly until you

see the language of your choice.

¡The audio language mode can be changed only if the

disc is recorded with a multiple language setting.

¡The screen display will disappear after about 5

seconds.

AUDIO 1.ENG DolbyD 5.1CH 48k/3

AUDIO 2.FRE DolbyD 5.1CH 48k/3

AUDIO 3.JPN DolbyD 5.1CH 48k/3

Bon jour

HELLO

For audio CDs

Press the AUDIO button during playback.

¡Pressing the AUDIO button cycles the sound mode

through STEREO, L-CH and R-CH.

AUDIO STEREO

Both right and left channels

are active (stereo).

AUDIO L-CH

Only the left channel is active.

AUDIO R-CH

Only the right channel is active.

–

_{Download from Www.Somanuals.co}3_m1_{. All Manuals Search And Download.}

1L25

¡It may take time to display the subtitles in the

selected language.

¡The screen display will disappear after about 5

CHANGING THE SUBTITLE

LANGUAGE

seconds.

DVD

¡When “SUBTITLE NOT AVAILABLE” appears on

screen, it means that no subtitle has been recorded.

The DVD/VCR has a function which allows you to

select the desired language for subtitles.

CHANGING THE CAMERA

ANGLE (Multi-Angle Pictures)

Press the SUBTITLE button during play-

back, and then press the SUBTITLE button

to select the desired subtitle language.

DVD

¡The subtitle language can be changed if the subtitles

are recorded in multiple languages on the DVD

being played.

The DVD/VCR has a function which allows you to

select the desired camera angle.

¡The subtitle language cannot be changed if the

subtitles are recorded in a single language on the

DVD being played.

Press the ANGLE button during playback.

¡If the disc contains sequences recorded from differ-

ent camera angles, the angle icon ( ) will appear

SUBTITLE 1.ENG/6

at the top-right of the screen. You can change the

camera angle when the icon appears on the screen.

Subtitle 1

SUBTITLE 2.FRE/6

¡The camera angle cannot be changed if the disc does

not contain sequences recorded from different

camera angles.

Subtitle 2

SUBTITLE OFF

OFF

Press the ANGLE button while the angle

number is shown on the screen.

ANGLE 1 / 8

¡Pressing the SUBTITLE button cycles the subtitle

language from SUBTITLE 1, SUBTITLE 2 and all

the languages recorded.

Angle 1

ANGLE 2 / 8

¡The current subtitle mode will be displayed when

you first press the SUBTITLE button.

Angle 2

¡Press the SUBTITLE button, and then press the

Arrow buttons (s/ B) to set it to on or off.

ANGLE 8 / 8

Angle 8

Notes

¡The screen display will disappear after about 5

seconds.

Bon jour

HELLO

¡The current camera angle will be displayed when

you first press the ANGLE button.

Notes

¡Some discs allow subtitle language setting on the

disc menu. (Operation varies between discs, so refer

to the manual accompanying the disc.)

¡If the desired language is not shown after pressing

the SUBTITLE button several times, the disc does

not have subtitles in that language.

¡The subtitle language resets to the one which was

selected in the setup mode, every time the power is

turned on or discs are replaced. If that

language is not available on a disc, a language

defined by the disc is selected.

–

_{Download from Www.Somanuals.co}3_m2_{. All Manuals Search And Download.}

1L25

CHANGING THE ON-SCREEN

DISPLAY

Press the DISPLAY button again.

DVD

ALL 4/12 0:13:45 -0:45:40 B

ALL:

TIME:

You can check the information regarding the disc by

pressing the DISPLAY button on the remote control.

Current track number

/ the total number of

tracks.

Elapsed time of the

current disk and

remaining time of

the current disc.

For DVDs

¡Use the Number buttons to start from a desired track.

Press the DISPLAY button during playback.

Press the DISPLAY button or the RETURN but-

ton to exit the display.

CH 7/49 0:01:46 -0:03:27

TIME:

CH (Chapter):

Elapsed time of the

current chapter and

remaining time of the

current chapter.

Current chapter number

/ the total number of

chapters.

BLACK LEVEL SETTINGS

DVD

You can select the BLACK LEVEL ON to make the

black areas of the picture brighter.

Press the DISPLAY button again.

TT 1/2 0:00:00 -1:23:45

Press the MODE button during playback.

TT(Title):

TIME:

Current title number

/ the total number of

titles.

¡The setup screen is displayed.

Elapsed time of the

current title and remaining

time of the current title.

BLACK LEVEL ON

Press the ENTER button to turn it on or off.

¡Use the Number button to start from the desired

chapter.

¡ON: This makes the dark parts brighter. (Default:

ON)

OFF: The original picture which is recorded on the

disc will be shown.

Press the DISPLAY button again.

¡Press the RETURN button to exit the display.

BIT RATE indicator will appear.

BIT RATE shows the quantity of

information which is recorded on the DVD.

BIT RATE

C L0

Layer number (*)

L0: Layer 0 is playing

L1: Layer 1 is playing

Current Repeat setting

C: Chapter repeat

T: Title repeat

B: A-B repeat

* appears when a layered disc is playing.

Press the DISPLAY button or the RETURN but-

ton to exit the display.

For audio CDs

Press the DISPLAY button during playback.

TR 4/12 0:03:21 -0:02:15 B

TR (Track):

TIME:

Current track number

/ the total number of

tracks.

Elapsed time of the

current track and

remaining time of

the current track.

–

_{Download from Www.Somanuals.co}3_m3_{. All Manuals Search And Download.}

1L25

CHANGING THE SETUP ITEMS

LANGUAGE SETTINGS

PLAYER MENU:

(The on-screen display appears in selected language.)

DVD

SET-UP

LANGUAGE CONTROLS

Press the SETUP button in STOP mode.

1.AUDIO

ORIGINAL

OFF

ORIGNAL

ENGLISH

2.SUBTITLE

3.DISC MENU

4.PLAYER MENU

¡The setup screen is displayed.

SET-UP

SELECT:

EXIT

SET

CANCEL: RETURN

ENTER

SETUP

1.LANGUAGE

2.DISPLAY

3.AUDIO

4.PARENTAL

Press the Arrow buttons (K/L) to select a

desired item, and then press the ENTER but-

ton.

SELECT:

EXIT

SET

CANCEL: RETURN

ENTER

SETUP

¡If “OTHER” is selected on the AUDIO, SUBTITLE

or DISC MENU setting screen, the Language Code

setting screen will appear. Press the Number buttons

to enter the desired language code while referring to

the list on page 38.

Press the Arrow buttons (K/L) to select

Language, and then press the ENTER but-

ton.

SET-UP

1.LANGUAGE

2.DISPLAY

3.AUDIO

SET-UP

LANGUAGE CONTROLS

DISC MENU

4.PARENTAL

LANGUAGE CODE

SELECT:

EXIT

SET

CANCEL: RETURN

ENTER

Please enter a 4-digit Language code.

- - - -

SETUP

EXIT: SETUP

CANCEL: RETURN

Press the Arrow buttons (K/L) to select an

item, and then press the ENTER button.

Press the SETUP button.

AUDIO:

(Voice is played in selected language.)

¡The setup mode will be canceled and the ordinary

screen is displayed.

SET-UP

LANGUAGE CONTROLS

1.AUDIO

ORIGINAL

OFF

ORIGNAL

ENGLISH

2.SUBTITLE

3.DISC MENU

4.PLAYER MENU

Notes

¡Language Setting for Audio and Subtitle is not avail-

able with some discs, so use the Audio and the

Subtitle button. Details are on pages 31 and 32.

¡You can also select an item by entering the number

besides it using the Number buttons.

SELECT:

EXIT

SET

CANCEL: RETURN

ENTER

SETUP

SUBTITLE:

(Subtitles are shown in selected language.)

SET-UP

¡When you change the setup items, press the STOP

LANGUAGE CONTROLS

button if you are in playback mode.

1.AUDIO

ORIGINAL

OFF

ORIGNAL

ENGLISH

2.SUBTITLE

3.DISC MENU

4.PLAYER MENU

¡While the setup menu is shown, you can not open or

close the tray.

SELECT:

EXIT

SET

CANCEL: RETURN

ENTER

SETUP

DISC MENU:

(The disc menu appears in selected language.)

SET-UP

LANGUAGE CONTROLS

1.AUDIO

ORIGINAL

OFF

ORIGINAL

ENGLISH

2.SUBTITLE

3.DISC MENU

4.PLAYER MENU

SELECT:

EXIT

SET

CANCEL: RETURN

ENTER

SETUP

–

_{Download from Www.Somanuals.co}3_m4_{. All Manuals Search And Download.}

1L25

DISPLAY SETTINGS

ANGLE ICON (Default: ON)

Display or not display the Angle icon on the screen.

DVD

SET-UP

DISPLAY CONTROLS

Press the SETUP button in STOP mode.

1.TV ASPECT

2.PANEL DISPLAY

3.ANGLE ICON

4:3 LETTER BOX

BRIGHT

4.AUTO POWER OFF ON

5.BACKGROUND BLUE

¡The setup screen will appear.

SELECT:

EXIT

SET

CANCEL: RETURN

ENTER

SET-UP

SETUP

1.LANGUAGE

2.DISPLAY

3.AUDIO

4.PARENTAL

AUTO POWER OFF (Default: ON)

Set or not set to turn off after the screen saver is started and

no keys are pressed for 35 minutes.

SELECT:

EXIT

SET

CANCEL: RETURN

ENTER

SETUP

SET-UP

DISPLAY CONTROLS

1.TV ASPECT

2.PANEL DISPLAY

3.ANGLE ICON

4.AUTO POWER OFF ON

5.BACKGROUND BLUE

4:3 LETTER BOX

BRIGHT

Press the Arrow buttons (K/L) to select

DISPLAY and then press the ENTER button.

SELECT:

EXIT

SET

CANCEL: RETURN

ENTER

SET-UP

SETUP

1.LANGUAGE

2.DISPLAY

3.AUDIO

BACKGROUND COLOR (Default: BLUE)

Select blue or gray.

4.PARENTAL

SELECT:

EXIT

SET

ENTER

RETURN

SETUP CANCEL

SET-UP

DISPLAY CONTROLS

1.TV ASPECT

2.PANEL DISPLAY

3.ANGLE ICON

4:3 LETTERBOX

BRIGHT

Press the Arrow buttons (K/L) to select an

item, and then press the ENTER button.

4.AUTO POWER OFF ON

5.BACKGROUND BLUE

SELECT:

EXIT

SET

CANCEL: RETURN

ENTER

SETUP

TV ASPECT (Default: 4:3 LETTER BOX)

4:3 LETTER BOX: Wide screen with black bars on top and

bottom

4:3 PAN & SCAN: Full height picture, trimmed both sides

16:9 WIDE: If wide screen TV is connected

Press the Arrow buttons (K/L) to select a

desired item, and then press the ENTER button

to change the setting.

SET-UP

DISPLAY CONTROLS

1.TV ASPECT

2.PANEL DISPLAY

3.ANGLE ICON

4.AUTO POWER OFF ON

5.BACKGROUND BLUE

4:3 LETTER BOX

BRIGHT

Press the SETUP button.

SET-UP

DISPLAY CONTROLS

SELECT:

EXIT

SET

ENTER

RETURN

¡The setup mode will be canceled and the ordinary

TV ASPECT

SETUP CANCEL

1.4:3 LETTER BOX

2.4:3 PAN & SCAN

3.16:9 WIDE

screen will appear.

Notes

SELECT:

EXIT

SET

ENTER

RETURN

¡You can also select an item by entering the number

SETUP CANCEL

besides it using the Number buttons.

PANEL DISPLAY (Default : BRIGHT)

Adjust the brightness of the display of the unit.

Auto: Stays dim only during playback.

SET-UP

DISPLAY CONTROLS

1.TV ASPECT

2.PANEL DISPLAY

3.ANGLE ICON

4:3 LETTER BOX

BRIGHT

SET-UP

DISPLAY CONTROLS

PANEL DISPLAY

4.AUTO POWER OFF ON

5.BACKGROUND BLUE

SELECT:

EXIT

SET

ENTER

RETURN

SETUP CANCEL

1.BRIGHT

2.DIMMER

3.AUTO

SELECT:

SET

ENTER

EXIT:

SETUP CANCEL

RETURN

–

_{Download from Www.Somanuals.co}3_m5_{. All Manuals Search And Download.}

1L25

Down Sampling (Default: AUTO)

Set the output for the DVD

AUDIO SETTINGS

recorded in PCM 96 kHz (96 kHz or 48 kHz)

DVD

¡Press the Arrow buttons (K/L) to select an item, and

then press the ENTER button.

Press the SETUP button in STOP mode.

SET-UP

¡The setup screen will appear.

1.LANGUAGE

2.DISPLAY

3.AUDIO

SETUP MENU

AUDIO OPTIONS

4.PARENTAL

1.DRC

2.DOLBY DIGITAL

3.DOWN SAMPLING

OFF

AUTO

SELECT:

EXIT

SET

CANCEL: RETURN

ENTER

SETUP

SELECT:

EXIT

SET

ENTER

RETURN

SET-UP

AUDIO CONTROLS

DOWN SAMPLING

SETUP CANCEL

Press the Arrow buttons (K/L) to select

Audio and then press the ENTER button.

1.AUTO

2.48kHz

3.96kHz

SET-UP

1.LANGUAGE

2.DISPLAY

3.AUDIO

SELECT:

SET

ENTER

RETURN

EXIT

SETUP CANCEL

4.PARENTAL

SELECT:

EXIT

SET

ENTER

RETURN

SETUP CANCEL

When playing a disc with copyright protection

¡If you select 96 kHz, copyright protection will be

activated and no sound will come out. If you select

AUTO, sound will be down sampled at 48 kHz.

Press the Arrow buttons (K/L) to select an

item, and then press the ENTER button.

DRC (Default: OFF)

Press the SETUP button.

On: DRC

¡The setup mode will be canceled and the ordinary

screen will appear.

(Dynamic Range Control)

¡This function is for controlling the range of sound

volume. By compressing the range of sound volume,

it is possible not only to suppress the output of loud

sound at night and but also to raise the volume of

low sound.

¡This function is effective only for the sound record-

ed by Dolby Digital recording.

SET-UP

AUDIO CONTROLS

1.DRC

2.DOLBY DIGITAL

3.DOWN SAMPLING

OFF

AUTO

SELECT:

EXIT

SET

ENTER

RETURN

SETUP CANCEL

Dolby Digital (default: ON)

On : Output by Dolby Digital

Set to On when the unit is connected to a Dolby

Digital Decoder.

SET-UP

AUDIO CONTROLS

1.DRC

2.DOLBY DIGITAL

3.DOWN SAMPLING

OFF

AUTO

SELECT:

EXIT

SET

ENTER

RETURN

SETUP CANCEL

–

_{Download from Www.Somanuals.co}3_m6_{. All Manuals Search And Download.}

1L25

When Parental Level is selected

PARENTAL LOCK

¡Press the Arrow buttons (K/L) to

select an item from “ALL” or 8 to

1 and then press the ENTER but-

ton.

DVD

Press the SETUP button in STOP mode.

¡The setup screen will appear.

SET-UP

PARENTAL CONTROLS

1.PARENTAL LEVEL

2.CHANGE

ALL

SET-UP

1.LANGUAGE

2.DISPLAY

3.AUDIO

4.PARENTAL

SET-UP

PARENTAL CONTROLS

PARENTAL LEVEL

SELECT:

EXIT

SET

ENTER

RETURN

SETUP CANCEL

ALL

SELECT:

SET

ENTER

[NC-17]

[R]

EXIT

SETUP CANCEL

RETURN

SELECT:

EXIT

SET

ENTER

RETURN

SETUP CANCEL

Press the Arrow buttons (K/L) to select

PARENTAL, and then press the ENTER but-

ton.

Press the SETUP button.

SET-UP

¡The setup mode will be canceled and the ordinary

screen will appear.

1.LANGUAGE

2.DISPLAY

3.AUDIO

4.PARENTAL

SELECT:

EXIT

SET

CANCEL: RETURN

ENTER

SETUP

CONTROL LEVELS

ALL

All parental lock is cancelled.

Press the Number buttons to enter a 4-digit

password (you can use any 4-digits except

for 4737), and then press the ENTER button.

Level 8

DVD software of any grade (adult/general/children)

can be played back.

¡This number will be used as the password from the

second time onward.

Levels 7 to 2

Only DVD software intended for general use and

children can be played back.

¡By entering the password, you can then change the

control level and password settings.

Level 1

¡If you want to change the password, select

“CHANGE” and

enter a new pass-

word. Then press

Only DVD software intended for children can be

played back, with those intended for adult and

general use prohibited.

SET-UP

PARENTAL CONTROLS

PASSWORD

the ENTER button.

Please enter a 4-digit password.

- - - -

Notes

¡With some DVDs, it may be difficult to find if they

are compatible with parental lock. Be sure to check

if the parental lock function operates in the way that

you have set.

EXIT

SETUP

CANCEL: RETURN

¡Record the password in case you forget it.

Press the Arrow buttons (K/L) buttons to

select an item, and then press the ENTER but-

ton.

IF YOU FORGET THE PASSWORD

1) Press 4, 7, 3, and 7 at Step 3.

¡Password will be cleared and parental level will be

set to ALL.

2) Proceed the above Steps 3-5 again.

–

_{Download from Www.Somanuals.co}3_m7_{. All Manuals Search And Download.}

1L25

LANGUAGE CODE LIST

Language

Country code

Language

Country code

No.

Latvian; Lettish

Malagasy

Maori

Afar

4 7 4 7

4 7 4 8

4 7 5 2

4 7 5 9

4 7 6 4

4 7 6 5

4 7 7 1

4 7 7 2

4 8 4 7

4 8 5 1

4 8 5 3

4 8 5 4

4 8 5 5

4 8 6 0

4 8 6 1

4 8 6 4

4 9 4 7

4 9 6 1

4 9 6 5

4 9 7 1

5 0 4 7

5 0 5 1

5 0 7 2

5 1 5 8

5 1 6 0

5 1 6 1

5 1 6 5

5 1 6 6

5 1 6 7

5 2 4 7

5 2 5 5

5 2 5 6

5 2 6 1

5 2 6 4

5 2 7 1

5 3 4 7

5 3 5 0

5 3 5 8

5 3 6 0

5 3 6 7

5 4 4 7

5 4 5 5

5 4 6 4

5 4 6 7

5 4 7 1

5 5 4 7

5 5 5 1

5 5 5 7

5 5 6 0

5 5 6 5

5 5 6 6

5 5 6 9

5 6 4 7

5 6 5 5

5 6 6 9

5 7 4 7

5 7 5 7

5 7 5 8

5 7 5 9

5 7 6 0

5 7 6 1

5 7 6 5

5 7 6 7

5 7 7 1

5 8 4 7

5 8 6 0

5 8 6 1

5 8 6 6

5 8 6 8

5 9 5 3

5 9 5 5

5 9 5 7

5 9 5 8

5 9 6 0

5 9 6 1

5 9 6 4

5 9 6 5

5 9 6 6

5 9 7 1

6 0 4 7

6 0 5 1

6 0 5 8

6 0 6 1

6 1 4 9

6 1 5 9

6 1 6 4

6 2 4 7

6 2 5 8

6 2 6 5

6 2 6 6

6 3 6 7

6 4 5 9

6 4 6 0

6 4 6 1

6 4 6 7

6 4 6 9

6 5 4 7

6 5 5 0

6 5 5 3

6 5 5 4

6 5 5 5

6 5 5 7

6 5 5 8

6 5 5 9

6 5 6 0

6 5 6 1

6 5 6 3

6 5 6 4

6 5 6 5

6 5 6 6

6 5 6 7

6 5 6 8

6 5 6 9

6 6 4 7

6 6 5 1

6 6 5 3

6 6 5 4

6 6 5 5

6 6 5 7

6 6 5 8

6 6 6 0

6 6 6 1

6 6 6 4

6 6 6 5

6 6 6 6

6 6 6 9

6 7 5 7

6 7 6 4

6 7 7 2

6 8 5 5

6 8 6 1

6 9 6 1

7 0 5 4

7 1 6 1

7 2 5 4

7 2 6 7

Abkhazian

Afrikaans

Amharic

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Arabic

Assamese

Aymara

Azerbaijani

Bashkir

Malay

Maltese

Byelorussian

Bulgarian

Bihari

Burmese

Nauru

Nepali

Bislama

Dutch [DUT]

Norwegian [NOR]

Occitan

Bengali; Bangla

Tibetan

Breton

(Afan) Oromo

Oriya

Catalan

Corsican

Czech

Panjabi

Polish

Welsh

Pashto; Pushto

Portuguese [POR]

Quechua

Danish [DAN]

German [GER]

Bhutani

Rhaeto-Romance

Kirundi

Greek [GRE]

English [ENG]

Esperanto

Spanish [SPA]

Estonian

Basque

Romanian [RUM]

Russian [RUS]

Kinyarwanda

Sanskrit

Sindhi

Sangho

Persian

Finnish [FIN]

Fiji

100 Serbo-Croatian

101 Singhalese

102 Slovak

Faroese

French [FRE]

Frisian

103 Slovenian

104 Samoan

105 Shona

106 Somali

107 Albanian

108 Serbian

109 Siswat

Irish [IRI]

Scots Gaelic

Galician

Guarani

Gujarati

Hausa

110 Sesotho

111 Sundanese

112 Swedish [SWE]

113 Swahili

114 Tamil

Hindi

Croatian

Hungarian [HUN]

Armenian

Interlingua

Interlingue

Inupiak

115 Telugu

116 Tajik

117 Thai

Indonesian

Icelandic [ICE]

Italian [ITA]

Hebrew

118 Tigrinya

119 Turkmen

120 Tagalog

121 Setswana

122 Tonga

Japanese

Yiddish

123 Turkish [TUR]

124 Tsonga

125 Tatar

Japanese [JPN]

Georgian

Kazakh

126 Twi

Greenlandic

Cambodian

Kannada

Korean [KOR]

Kashmiri

Kurdish

127 Ukrainian

128 Urdu

129 Uzbek

130 Vietnamese

131 Volapuk

132 Wolof

Kirghiz

133 Xhosa

Latin

134 Yoruba

135 Chinese [CHI]

136 Zulu

Lingala

Laothian

Lithuanian

If you choose a Language that has a 3 letter language code, the code will be displayed every time you change

the Audio or Subtitle language setting on pages 31 and 32. If you choose any other languages, ‘---’ will be dis-

played instead. (3 letter language codes are written in square brackets.)

–

_{Download from Www.Somanuals.co}3_m8_{. All Manuals Search And Download.}

1L25

TROUBLESHOOTING GUIDE

If the DVD/VCR does not perform properly when operated as instructed in this Owner's Manual, check the

player consulting the following checklist.

PROBLEM

No power.

CORRECTIVE ACTION

• Make sure the power plug is connected to an AC outlet.

• Make sure the power is turned on.

The player does not respond to. • Check if the power plug is connected to an AC outlet.

the remote control.

• Check the batteries in the remote control.

• Aim the remote control directly at the remote sensor. If necessary, remove all the

obstacles between the sensor and the remote.

• You have to be within 7 m of the player.

• Check if the correct mode is selected. If not switch the mode by pressing the DVD or

the VCR button, whichever you need, on the remote control.

Timer recording is impossible. • Make sure the timer recording is set correctly.

• Make sure the power is off.

• Make sure the DVD/VCR clock is set correctly.

Cannot go into Record mode. • Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.

• Put he player in VCR mode. Press the VCR button on the remote control so that the green

VCR OUTPUT light is lit.

(

)

Playback picture is partially noisy. • Adjust tracking control for a better picture by pressing the CHANNEL button

on the

DVD/VCR.

Cannot view a tape but the

• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING” .

• Make sure the DVD/VCR is not in the Menu mode.

audio is OK

No, or poor, playback picture.

• Select channel 3 or 4 on your TV, then press the VCR/TV button so that the VCR/TV

indicator on the VCR comes on.

• Fine tune your TV.

TV programs cannot be seen

normally.

• Re-check the ANT. IN and ANT. OUT connections. See page 14.

• Press the VCR/TV button so that the VCR/TV indicator on the DVD/VCR disappears.

• Press the VCR button on the remote control to put it in the VCR mode. Check if the green

VCR OUTPUT light is lit. Then, set it to the TV position by pressing the VCR/TV button.

The VCR/TV light goes off.

Video or color fades in and out

when making a copy of a video tape.

•

You cannot copy a copyrighted video tape. You are experiencing copy guard protection.

Cannot remove the tape.

• Check if the player is in the VCR mode. If not, press the VCR button on the remote control

to switch the mode.

No picture.

• Connect the video cables firmly.

• Insert a correct video disc that plays on this player.

• Press the DVD button on the remote control. Check if the DVD OUTPUT Light is lit. Then

try other DVD feature buttons.

• Insert the disc.

• Clean the disc.

Disc cannot be played

• Place the disc correctly, with the label side up.

• Cancel the parental lock or change the control level.

• Connect the audio cables firmly.

No sound

• Turn the power of the audio component on.

• Correct the audio output settings.

• Correct the input settings on the audio component.

• Connect the player directly to the TV.

Distorted picture

•

There are some cases where pictures may be slightly distorted, which are not a sign of a mal-

function.

• Although pictures may stop for a moment, this is not a malfunction.

Audio or subtitle language

does not match the set up

•

The selected language is not available for audio or subtitles on the DVD.

This is not a malfunction

The camera angle cannot be

changed.

• The DVD does not contain sequences recorded from different camera angles.

This is not a malfunction.

Audio or subtitle language

cannot be changed.

• The DVD does not contain audio source or subtitles in the selected language.

This is not a malfunction.

• That operation is prohibited by the player or the disc.

This is not a malfunction.

“Prohibited icon” appears on the

screen, prohibiting an operation.

Notes

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this

Owner’s Manual for details on correct operations.

¡Playback from a desired track and random playback are not available during program playback.

–

_{Download from Www.Somanuals.co}3_m9_{. All Manuals Search And Download.}

1L25

HANDLING PRECAUTIONS

AUTO HEAD CLEANING

SERVICING

• Automatically cleans video heads as you insert or remove a cas-

sette, so you can see a clear picture.

Should your DVD/VCR become inoperative, do not try

to correct the problem by yourself. There are no user-

serviceable parts inside. Turn off, unplug the power

cord, and please call our help line at 1-800-242-7158 to

locate an Authorized Service Center.

• Playback picture may become blurred or interrupted while the TV

program reception is clear. Dirt accumulated on the video heads

after long periods of use, or the usage of rental or worn tapes can

cause this problem. If a streaky or snowy picture appears during

playback, the video heads in your DVD/VCR may need to be

cleaned.

CABINET CLEANING

1. Please visit your local Audio/Video store and purchase a good

quality VHS Video Head Cleaner.

¡Wipe the front panel and other exterior surfaces of

the DVD/VCR with a soft cloth immersed in

lukewarm water and wrung dry.

2. If a Video Head Cleaner does not solve the problem, please call

our help line at 1-800-242-7158 to locate an Authorized Service

Center.

¡Never use a solvent or alcohol. Do not spray

insecticide liquid near the DVD/VCR. Such

chemicals may cause damage and discoloration to

the exposed surfaces.

NOTES:

• Remember to read the instructions included with the video head

cleaner before use.

• Clean video heads only when problems occur.

IF THE LASER OPTICAL PICKUP UNIT IS DIRTY

¡If the player still does not perform properly when it is operated while referring to the relevant sections and to the

TROUBLESHOOTING GUIDE in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your

dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

DISC HANDLING

¡Use discs which have the following logos on them. ¡To clean-off, use a soft cloth.

(Optical audio digital discs.)

¡Do not use a hard cloth since this will mar the disc.

¡Wipe the disc in a straight line from center to edge.

¡Never wipe with a circular motion.

¡Handle the discs so that fingerprints and dust do not

adhere to the surfaces of the discs.

¡Do not use detergent or abrasive cleaning agents.

¡Always store the disc in its protective case when it is

not used.

–

_{Download from Www.Somanuals.co}4_m0_{. All Manuals Search And Download.}

1L25

SPECIFICATIONS

Product type:

Discs:

DVD player with Video Cassette Recorder

DVD video

Audio CD

Video Cassette tape

Converter output:

Power source:

VHF Channel 3 or 4.

120 V AC +/- 10%, 60 Hz +/- 0.5%

25 W (standby: 7.2 W)

5°C to 40°C

Power consumption:

Operating temperature:

Dimensions:

W 17-1/8” (435 mm)

H 4” (99 mm)

D 10-1/2” (266 mm)

8.8 lbs (4 kg)

Weight:

¡Designs and specifications are subject to change without notice.

¡If there is a discrepancy between languages, the default language will be English.

–

_{Download from Www.Somanuals.co}4_m1_{. All Manuals Search And Download.}

1L25

CONTROLES DEL FUNCIONAMIENTO Y SUS FUNCIONES

PANEL DELANTERO

7 8 9

POWER

VIDEO

OUTPUT

CHANNEL

DVD OPERATION

SKIP/REV PLAY

VCR OPERATION

TIMER

SET

AUDIO

VCR/TV

CST.IN

OPEN/CLOSE

STOP

FWD/SKIP

STOP/EJECT REW

PLAY

F.FWD REC/OTR

23 21

19 17 15 13 11

18 16 14 12 10

PANEL REMOTO

Conecte aquí un cable de videó procedente de la toma de

salida de videó de un camcorder, otro VCR o una fuente de

videó (reproductor de discos láser, camcorder, etc.).

POWER SPEED AUDIO

10. Tomas AUDIO IN

Conecte aquí cables de audio procedentes de las tomas de sali-

da de audio de un camcorder, otro VCR o una fuente de audio.

11. Botón TIMER SET

SKIP/CH.

VCR/TV

SLOW

+100

Presione para poner el DVD/VCR en modo de espera para

una grabación con temporizador.

VCR

DISPLAY DVD

PAUSE

12. Luz CASSETTE IN

Se enciende cuando un cassette está en el DVD/VCR.

13. Luz VCR/TV

PLAY

Se enciende cuando el DVD/VCR está en la posición VCR,

y se apaga cuando está en la posición TV.

14. Botones CHANNEL

STOP

RECORD

En el modo VCR, presione para cambiar canales TV en el

DVD/VCR; presione para ajustar el seguimiento durante

reproducción de movimiento normal o lento; presione para

remover fluctuaciones verticales en una imagen fija.

15. Botón REC/OTR (VCR)

ENTER

SETUP

TITLE

RETURN

MODE

CLEAR/

MODE ZOOM

C.RESET

SUBTITLE ANGLE REPEAT

Presiones una vez para iniciar una grabación. Presione

repetidamente para iniciar un grabación de Un-Toque.

16. Botón F.FWD (VCR)

Presione para avanzar rápidamente la cinta o ver la

1. Bandeja de carga del disco

2. Luz DVD OUTPUT (verde)

imagen rápidamente en avance durante reproduc-

ción. (Búsqueda en Avance). Cuando ajuste progra-

ma. (Por ejemplo: ajuste reloj o programa con tem-

porizador), presione para determinar su selección y

proceder al siguiente paso que usted desea entrar.

Presione para determinar los modos de ajuste del

menú en pantalla. Presione para añadir o cancelar

números de canal durante preajuste de canal.

17. Botón PLAY (VCR)

Esta luz aparece cuando el DVD/VCR está en modo DVD.

Usted sólo puede mirar DVDs cuando la Luz DVD OUT-

PUT verde está encendida. Para hacer que la Luz DVD

OUTPUT verde se encienda, presione el Botón DVD en el

control remote o el Botón OUTPUT en el panel delantero.

3. Luz VCR OUTPUT (Verde)

Esta luz aparece cuando el DVD/VCR está en el modo

VCR. Usted puede sólo mirar cintas cuando la Luz VCR

OUTPUT verde está encendida. Para hacer que la Luz VCR

OUTPUT verde se encienda, presione el Botón VCR en el

control remote o el Botón OUTPUT en el panel delantero.

4. CASSETTE COMPARTMENT

resione para comenzar reproducción. Presione para

entrar dígitos cuando ajuste programa. (Por ejemplo:

ajuste reloj o programa con temporizador). Presione

para seleccionar los modos de ajuste del menú en

pantalla.

5. Luz REC/OTR

18. Botón REW (VCR)

Se enciende durante la grabación.

Presione para rebobinar la cinta o para ver la imagen

6. Luz TIMER SET

rápidamente en inversión durante el modo de repro-

ducción.(Búsqueda en Rebobinado). Presione para

cancelar un ajuste de programa con temporizador.

Presione para corregir dígitos cuando ajuste progra-

ma. (Por ejemplo: ajuste de reloj o programa con

temporizador). Presione para añadir o cancelar

números de canal durante preajuste de canal.

19. Botón STOP/EJECT (VCR)

Esta luz brilla cuando el DVD/VCR está en el modo espera

o apagada para una grabación con temporizador o durante

una grabación de Un-Toque, Parpadea si se presiona Botón

TIMER SET para una grabación con temporizador, pero no

hay cinta en el DVD/VCR. Parpadea cuando todas las

grabaciones con temporizador o grabaciones de Un-Toque

han terminado.

7. Botón POWER

GBotón de expulsión

Púlselo para sacar el videocasete de la

Presione para conectar y desconectar la alimentación.

8. Luz POWER

videograbadora.

Se enciende cuando la alimentación está conectada.

9. Toma VIDEO IN

Botón Stop

Presione detener el movimiento de la cinta.

–

_{Download from Www.Somanuals.co}4_m2_{. All Manuals Search And Download.}

1L25

Presione para entrar dígitos cuando ajuste progra-

ma. (Por ejemplo: ajuste reloj o programa con tem-

porizador). Presione para seleccionar los modos de

ajuste del menú en pantalla.

programa con temporizador). Presione para añadir

o cancelar números de canal durante preajuste de

canal.

33. Botón Stop

20. Botón OUTPUT

Presione detener el movimiento de la cinta.

Presione para entrar dígitos cuando ajuste progra-

ma. (Por ejemplo: ajuste reloj o programa con tem-

porizador). Presione para seleccionar los modos de

ajuste del menú en pantalla.

Presione para seleccionar el modo DVD o el modo VCR.

G Usted puede cambiar el modo de salida ya presionando

el Botón OUTPUT en el panel delantero o ya presionan-

do el Botón DVD o VCR en el control remote. Sin

embargo, si usted presiona el Botón OUTPUT en el

panel delantero primero, usted necesita volver a

seleccionar el modo correspondiente presionando el

Botón DVD o el Botón VCR en el control remote.

21. Botón FWD/SKIP (DVD)

34. Botón RECORD

Presione para iniciar una grabación. O, presione repetida-

mente para iniciar una grabación de Un-Toque.

35. Botón MENU

GModo DVD

Reproduce desde el inicio del siguiente capítulo o pista.

Retenga abajo para avanzar rápidamente la reproducción.

22. Botón PLAY (DVD)

Presione para visualizar el menú del Disco.

GModo VCR

Presione para tener acceso al menú VCR.

36. Botón TITLE

Comienza la reproducción del contenido del disco.

23. Botón SKIP/REV (DVD)

37. Botón SETUP

Reproduce desde el inicio del capítulo o pista actual.

Retenga abajo para reproducción inversa rápida.

24. Botón STOP (DVD)

Presione para entrar el modo de preparación.

38. Botón ZOOM

Amplía parte de una imagen reproducida-DVD.

39. Botón MODE

Detiene la operación del disco.

25. Botón OPEN/CLOSE

Activa modo de reproducción de programa o reproducción

aleatoria cuando se reproducen CDs o MP3. Ajusta Nivel

de negro.

Presione para insertar discos en o removerlos de la bandeja

de disco.

26. Ventanilla de Sensor Remoto, Visualización

40. Botón SUBTITLE

27. Botón SPEED

Presione para seleccionar un idioma de subtítulo deseado.

41. Botón ANGLE

Presiona para seleccionar la velocidad de grabación de

VCR (SP o SLP)

Presione para cambiar el ángulo de cámara para ver la

secuencia que se está reproduciendo desde un ángulo difer-

ente.

28. Botón POWER

Presione para conectar y desconectar la alimentación.

29. Botones numéricos

42. Botón REPEAT

GModo DVD

Repite la reproducción del disco, título, capítulo o pista

actual.

Presione para seleccionar directamente una Pista (CD de

Audio) para reproducción.

43. Botón A-B REPEAT

Presione para programar Pistas (Dcde Audio) para repro-

ducir.

Repite la reproducción de una sección seleccionada.

44. Botón SEARCH MODE

GModo VCR

GModo DVD

Presione para seleccionar canales de TV en el DVD/VCR.

Para seleccionar canales, entre números de canal como un

número de dos dígitos para los resultados más rápidos.

Por ejemplo, para seleccionar canal 6, presione 0.6.

Botón +100:

Presione para tener acceso o remover la indicación de

búsqueda, que le permite ir directamente

Título/Capítulo/Pista/Tiempo especificado.

GModo VCR

Presione para avanzar o rebobinar rápidamente la cinta a

una longitud específica de tiempo.

45. Botón CLEAR/C.RESET

GModo DVD

Si usted desea seleccionar canales 100 y arriba, presione

este Botón primero, luego presione los dos dígitos últi-

mos. Por ejemplo, para seleccionar canal 125, presione

Botón “+100” primero, luego presione “2” y “5”.

30. Botón DISPLAY

Presione para reponen el ajuste.

GModo VCR

Presione para reponer el contador. Presione para salir de

la pantalla MEMU.

GModo DVD

Presione para tener acceso o remover la pantalla de visu-

alización durante reproducción DVD o CD de audio.

GModo VCR

46. Botón RETURN

Vuelve a la operación previa.

Presione para tener acceso o remover visualización de

estado en pantalla de VCR.

47. Botones de flecha

Utilice cuando haga ajustes mientras mira la indicación en

una pantalla de TV.

31. Botón DVD

Presione antes de utilizar el control remote para funciones

DVD.

48. Botón ENTER

Presione para aceptar un ajuste.

49. Botón g

32. Botón h

GModo DVD

Presione para ver la imagen DVD en movimiento de

inversión rápida o para invertir la reproducción de un

DC de Audio.

Presione para avanzar rápidamente el Disco. Presione el

Botón PAUSE, luego presione el Botón FWD iniciar a

reproducción en movimiento lento. Presione el Botón

FWD repetidamente para cambiar la velocidad de

avance del movimiento lento.

GModo VCR

Presione para rebobinar la cinta o para ver la ima-

gen rápidamente en inversión durante el modo de

reproducción.(Búsqueda en Rebobinado). Presione

para cancelar un ajuste de programa con tempo-

rizador. Presione para corregir dígitos cuando

ajuste programa. (Por ejemplo: ajuste de reloj o

GModo VCR

resione para avanzar rápidamente la cinta o ver la

imagen rápidamente en avance durante reproduc-

ción. (Búsqueda en Avance). Cuando ajuste pro-

grama. (Por ejemplo: ajuste reloj o programa con

–

_{Download from Www.Somanuals.co}4_m3_{. All Manuals Search And Download.}

1L25

temporizador), presione para determinar su selec-

ción y proceder al siguiente paso que usted desea

entrar. Presione para determinar los modos de

ajuste del menú en pantalla. Presione para añadir o

cancelar números de canal durante preajuste de

canal.

Utilice para seleccionar la posición VCR o TV. Si la Luz

VCR/TV aparece en la parte delantera del DVD/VCR, está

en la posición VCR (en cualquier modo VCR o DVD). Si

la Luz VCR/TV no aparece en la parte delantera del

DVD/VCR, está en la posición TV.

GPosición VCR

Cuando la Luz VCR OUTPUT verde aparece en la parte

delantera del DVD/VCR, utilice la VCR para mirar una cinta,

para mirar un programa de TV mientras lo graba o para mirar

una radiodifusión de TV utilizando los botones CHANNEL o

Numéricos para cambiar canales en la DVD/VCR.

Cuando la Luz DVD/VCR aparece en la parte delantera de la

DVD/VCR, utilice el DVD/VCR para mirar la reproducción

de Disco o menús.

50. Botón PLAY

Presione para comenzar reproducción. Presione

para entrar dígitos cuando ajuste programa. (Por

ejemplo: ajuste reloj o programa con tempo-

rizador). Presione para seleccionar los modos de

ajuste del menú en pantalla.

51. Botón VCR

Presione antes de utilizar el control remote para fun-

ciones de VCR.

GPosición de TV

Utilice para mirar TV (cambiando canales en el TV) o

para mirar un programa mientras graba otro.

55. Botones SKIP/CH

52. Botón PAUSE

GModo DVD

Presione para pausar la reproducción de Disco. Presione

repetidamente para avanzar la imagen DVD paso a paso

(o un fotograma cada vez).

GModo DVD

Presione para saltar Capítulos o Pistas.

GModo VCR

Presione para cambiar canales de TV en la DVD/VCR.

56. Botón AUDIO

Mientras graba, presione para detener provisionalmente

la grabación (pausa). Presione por segunda vez para

reanudar la grabación normal. Usted no puede pausar

Grabación de Un-Toque. O, presione durante la repro-

ducción de cinta para congelar la imagen.

53. Botón SLOW

Presione para seleccionar un idioma de audio deseado o

modo de sonido.

Notas

Para utilizar el control remote para operar el DVD/VCR y

sus funciones, presione el Botón DVD en el control remote

antes de presionar otros botones DVD. Verifique que la

Luz DVD OUTPUT verde está encendida.

Durante la reproducción de cinta, presione mirar la cinta de

videó a movimiento lento. Presione de nuevo para reanudar

la reproducción normal. Este Botón no afecta la reproduc-

ción DVD.

Para utilizar el control remote para operar la VCR y sus

funciones, presione el Botón VCR en el control remote

antes de presionar otros botones VCR. Verifique que la

Luz VCR OUTPUT verde está encendida.

54. Botón VDR/TV

VISIÓN TRASERA

58 59

DVD/VCR

OUT

ANT - IN

DVD/VCR

AUDIO OUT

AUDO

DIGITAL AUDIO OUT

PCM / BITSTREAM

COAXIAL

S-VIDEO

OUT

ANT - OUT

VIDEO

CH3 CH4

66 64

Conecte aquí el cable de videó amarillo (provisto) y a la

57. Cordón de Alimentación AC

toma de entrada de Videó de TV.

Conecte a una toma de corriente AC estándar para sum-

inistrar corriente al DVD/VCR.

63. Toma VIDEO IN

Conecte un cable procedente de la toma de salida de

videó de un camcorder, otra VCR o una fuente de audio-

visual (reproductor de disco láser, reproductor de disco

de videó, etc.) aquí.

58. Tomas AUDIO IN

Conecte aquí los cables de audio procedentes de las

tomas de salida de audio de un camcorder, otra VCR o

una fuente de audio.

64. Cambio CH3/CH4

59. Tomas DVD/VCR AUDIO OUT

Conecte aquí los cables de audio provistos y a las tomas

de entrada de audio de un televisor u otro equipo de

audio.

Ajuste a canal 3 ó 4 para utilizar su TV con su

DVD/VCR.

65. Toma ANTI-IN (Entrada de Antena)

Conecte su antena o cable aquí.

60.Toma COAXIAL

Conecte aquí un cable de audio digital coaxial opcional

y a la toma de entrada Audio Digital Coaxial de un

descodificador o receptor de audio.

66. Toma ANT-OUT (Salida de Antena)

Utilice el cable coaxial RF provisto para conectar esta

toma a la Toma ANTENNA IN en su TV.

Caja de cables o Sistema de Radiodifusión Directa.

61. Toma S-VIDEO OUT

Conecte aquí un cable de S-Videó opcional y a la toma

de entrada de S-Videó de un televisor.

62. Toma DVD/VCR VIDEO OUT

Notas

¡La toma S-VIDEO OUT, toma COAXIAL, toma OPTICAL son sólo útiles en el modo DVD.

–

_{Download from Www.Somanuals.co}4_m4_{. All Manuals Search And Download.}

1L25

CAMBIO DE VCR/DVD

Como este producto se utiliza del reproductor VCR y DVD, es necesario cambiar uno del

otro.

CAMBIO AL MODO VCR

CAMBIO AL MODO DVD

Presione el Botón VCR en el control remote.

(Verifique que la Luz VCR OUTPUT está enendida.)

Presione el Botón DVD en el control remote.

(Verifique que la Luz DVD OUTPUT está encendida)

Notas

¡Presionando sólo el Botón OUTPUT en el panel delantero no cambia el modo del control remote. Usted siem-

pre necesita seleccionar el modo correcto en el control remote, también.

POWER

VIDEO

POWER SPEED AUDIO

OUTPUT

CHANNEL

DVD OPERATION

SKIP/REV PLAY

VCR OPERATION

TIMER

SET

AUDIO

VCR/TV

CST.IN

OPEN/CLOSE

STOP

FWD/SKIP

STOP/EJECT REW

PLAY

F.FWD REC/OTR

SKIP/CH.

VCR/TV

SLOW

+100

DVD OUTPUT Light

DVD button

VCR OUTPUT Light

VCR button

DISPLAY DVD

VCR

PAUSE

PLAY

OUTPUT

STOP

RECORD

ENTER

LAY

FWD/SKIP

STOP/EJECT REW

SETUP

TITLE

RETURN

MODE

CLEAR/

MODE ZOOM

C.RESET

OUTPUT button

SUBTITLE ANGLE REPEAT

–

_{Download from Www.Somanuals.co}4_m5_{. All Manuals Search And Download.}

1L25

CONEXIONES

AJUSTANDO EL CONMUTADOR

CH3/CH4

DVD/VCR A CONEXIÓN DE TV

1. Desconecte el cordón de alimentación AC del toma de Si su TV no tiene terminales A/V:

corriente AC.

Cuando el DVD/VCR está en modo de Reproducción

VCR o cuando el DVD/VCR está en el modo VCR. su

2. Desconecte la antena o cable del TV.

3. Conecte la antena o cable a la toma ANT.IN del TV recibirá señales del DVD/VCR en cualquiera de

DVD/VCR.

los canales 3 ó 4. Para utilizar el DVD/VCR con su TV,

4. Conecte el DVD/VCR al TV utilizando el cable coaxi- ponga el conmutador selector en CH3 o CH4 (que está

al.

ubicado en la parte trasera de su DVD/VCR),

5. Enchufe los cordones de alimentación CA del cualquiera no se utilice para radiodifusiones normales

DVD/VCR y TV dentro de las tomas de corriente AC. en su área. Luego, ajuste su TV al mismo canal.

CONECTANDO A UN TV

Por favor, vea la [Fig.1] en la página 14 para detalles.

CONECTADO A UN TV QUE TIENE TOMA DE ENTRADA DE S-

VÍDEO o TOMAS DE ENTRADA DE VÍDEO COMPONENTE

Por favor, vea la [Fig. 2] en la página 14 para detalles.

CONECTANDO A UN AMPLIFICADOR EQUIPADO CON TOMAS DE

ENTRADA DIGITAL, TALES COMO PLATINA MD O PLATINA DAT

Por favor, vea la [Fig. 4] en la página 15 para detalles.

CONECTANDO A UN DESCODIFICADOR DIGITAL DOLBY

Por favor, vea la [Fig. 5] en la página 16 para detalles.

CONECTANDO A UN AUDIO ANALÓGICO

Por favor vea la [Fig. 6] en la página 16 para detalles.

PREPARACIÓN

PREPARACIÓN DE CANAL AUTOMÁTICA

VCR

4 Inicie canal preajustado presionando [F.FWD]

una vez. El sintonizador explora y memoriza

todos los canales activos de su área.

Conecte elTV y ponga elTV en el canal 3 ó 4.

Conecte el DVD/VCR presionando [POWER].

Ambas Luces POWER y VCR/TV se encen-

derán.

Después de explorar, el sintonizador de

detiene en el canal memorizado más bajo. La

pantalla de TV retorna al modo TV.

Seleccione el Idioma en la pantalla (“INGLÉS”,

“FRANCÉS” o “ESPAÑOL”) presionando [PLAY] o

[STOP]. Luego, presione [F.FWD].

–

_{Download from Www.Somanuals.co}4_m6_{. All Manuals Search And Download.}

1L25

PREPARACIÓN DE RELOJ

REPRODUCCIÓN DE UN DISCO

VCR

REPRODUCIENDO UN DVD,

VIDEO O UN CD AUDIO

Ajuste el reloj con precisión para grabación con tempo-

rizador automática adecuada. Le sugerimos que usted utilice

un TV o estación de radio como su fuente de tiempos.

DVD

Presione [MENU] dos veces para llamar el menú Para empezar

principal. (Si usted ha ajustado ya el reloj, usted Conecte la alimentación del TV, amplificador y

sólo tiene que presionarlo una vez).

cualquier otro componente que se encuentre conectado

al DVD/VCR. (Cambie el sistema de entrada para que

se adapte DVD/VCR y compruebe que el volumen de

sonido sea correcto).

Si el reloj no está ajustado, aparece primero el menú

CLOCK SET. En este caso, siga el paso [3].

Seleccione “CLOCK SET” presionando [PLAY]o

[STOP]. Luego, presione [F.FWD]

Presione el Botón POWER.

¡La alimentación se conectará.

Ajuste el reloj.

Compruebe que la Luz DVD OUTPUT está encen-

dida. Si no, presione el Botón DVD en el control

remote para cambiar el modo DVD/VCR.

1) Ajuste el mes

Presione [PLAY] o [STOP] repetidamente

Luego, presione [F.FWD].

Presione el Botón OPEN/CLOSE.

¡La bandeja de carga del disco se abrirá.

2) Ajuste el día

Ponga un disco en la bandeja.

Presione [PLAY] o [STOP] repetidamente

Luego, presione [F.FWD].

¡Asegúrese de que el disco está asentado correcta-

mente, con el lado de la etiqueta arriba.

3) Ajuste el año

Presione el Botón PLAY.

Presione [PLAY] o [STOP] repetidamente

Luego, presione [F.FWD].

¡La bandeja se cerrará automáticamente, y la repro-

ducción empezará luego desde el primer capítulo o

pista del disco. Usted necesita presionar el Botón

PLAY sólo cuando la bandeja se ha cerrado presion-

ando el Botón OPEN/CLOSE.

El día de la semana aparecerá automáticamente.

4) Ajuste la hora

Presione [PLAY] o [STOP] repetidamente

Luego, presione [F.FWD].

Presione el Botón STOP para detener la

reproducción.

5) Ajuste el minuto

Presione [PLAY] o [STOP] repetidamente

Luego, presione [F.FWD].

6) Ajuste el AM o PM

AJUSTE DE RELOJ

MES DIA

AÑO

Presione [PLAY] o [STOP]

repetidamente.

03 18 LUN 2002

HORA MINUTO AM/PM

PM AM

¡Para retroceder un paso, presione [REW]

Ponga en marcha el reloj presionando

[CLEAR/C.RESET] o [F.FWD].

–

_{Download from Www.Somanuals.co}4_m7_{. All Manuals Search And Download.}

1L25

FUNAI CORPORATION

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workman-

ship as follows:

DURATION:

PARTS:

FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from

the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded

from this warranty.

LABOR:

FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date

of original retail purchase.

LIMITS AND EXCLUSIONS:

This warranty is extended only to the original retail purchaser. A purchase receipt or other proof of original retail

purchase will be required together with the product to obtain service under this warranty.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or

if service was attempted by an unauthorized service center. This FUNAI CORPORATION Limited warranty does

not apply to any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It

does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not

supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,

alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this prod-

uct or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE

USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF

FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FIT-

NESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTA-

TIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED

SERVICE CENTER. THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO FUNAI AUTHO-

RIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE, IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE

UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT

FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT

WITHOUT PRIOR NOTICE.

To locate your nearest FUNAI Authorized Service Center or for general service procedure,

please call 1-800-242-7158 or write to the following:

FUNAI CORPORATION

Customer Service

100 North Street; Teterboro, NJ 07608

Tel :1-800-242-7158

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

Printed in China

0VMN03152

#####

Download from Www.Somanuals.com. All Manuals Search And Download.

H9223UD

Sennheiser Musical Table MKE 2 4 GOLD C User Manual
Shark Vacuum Cleaner SV726 User Manual
Sharp Refrigerator SJ560M User Manual
Sierra Webcam VSP 3001 User Manual
Snapper Lawn Mower 07224 User Manual
Sony MP3 Docking Station RDPXA700IP User Manual
Stanton CD Player C314 User Manual
Subaru Robin Power Products Automobile Parts EX30D User Manual
Sylvania TV VCR Combo SRC2213W User Manual
Tamron Camera Lens AF016C700 User Manual