FUNAI CORPORATION
LIMITED WARRANTY
Owner’s
Manual
FUNAI CORP. will repair this product, free of charge in CANADA in the event of defect in materials or workmanship as follows:
27 INCH
COLOR TELEVISION
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of
original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty.
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original
retail purchase.
LABOR:
CWF2703
LIMITS AND EXCLUSIONS:
FEATURES
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE
RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH
THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.
●
Tinted, Bright Black Matrix Picture Tube
●
181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.
PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tun-
ing system provides free and easy channel selection, and lets you tune directly to any channel
using the channel number buttons (0~9 and +100-key) on the remote control.
On-Screen Function Display.
This warranty shall not be extended to any other person or transferee.
●
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or
if service was attempted by AUTHORIZED SERVICE FACILITY. This FUNAI CORPORATION Limited warranty
does not apply to any the product not purchased and used in CANADA.
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this prod-
uct or damage which results from fire, flood, lightning or other acts of God.
●
●
●
●
Full-Function Remote Control
Sleep Timer
Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news,
prerecorded tapes, etc. with either a dialogue caption or text display added to the program.
Auto Shut Off Function- If there is no air signal input from the antenna terminal and no
user operation for 15 minutes, the TV will turn itself off automatically.
V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.
Front / Rear AV Input
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
●
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FIT-
NESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTA-
TIVES IN CANADA.
●
●
PRECAUTIONS
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AUTHORIZED SERVICE
FACILITY.
THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO AUTHORIZED SERVICE FACILITY.
●
Place your TV in a room with adequate ventilation.
Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.
Do not place your TV on soft surfaces, such as rugs or blankets.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT.
IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS
COSTS WILL BE CHARGED.
●
●
●
Leave enough room for air to circulate around the bottom, top and back of the set.
ATTENTION:
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR
The serial number of this product may be found on the back of the TV. No others have the same
serial number as yours. You should record the number and other vital information here and retain
this book as a permanent record of your purchase to aid identification in case of theft.
NOTICE.
To locate your nearest AUTHORIZED SERVICE FACILITY or general service procedure, please contact to us:
FUNAI CORPORATION
Customer Service
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
100 North Street; Teterboro, NJ 07608 , USA
Tel: 1-800-242-7158
This Owner’s Manual is made of recycled paper.
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING
AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE
0EMN02281
Printed in Thailand
L6606TG * * * * *
ANTENNA/CABLE CONNECTIONS
UHF/VHF Rod
*Some cable TV systems use scram-
bled signals and require a special con-
verter to receive these channels.
CAUTION: TO PREVENT ELECTRIC
SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
Antenna
(Not supplied)
Consult your local cable company.
VHF
Antenna
(Not supplied)
CATV Box *
FCC WARNING- This equip-
ment may generate or use radio
frequency energy. Changes or
modifications to this equipment
may cause harmful interference
unless the modifications are
expressly approved in the
instruction manual. The user
could lose the authority to oper-
ate this equipment if an unau-
thorized change or modification
is made.
or Satellite Box
(Not supplied)
ATTENTION:
UHF
POUR ÉVITER LES CHOC ÉLECTRIQUES,
INTRODUIRE LA LAME LA PLUS LARGE
DE LA FICHE DANS LA BORNE CORRE-
SPONDANTE DE LA PRISE ET POUSSER
JUSQU’AU FOND.
Antenna
(Not supplied)
NT.IN
OUT
IN
From Cable System
or Satellite Antenna
75-ohm
Coaxial Cable
75-ohm
Coaxial Cable
ANT. IN
OR
OR
From Cable System
VHF/UHF Combiner
(Not supplied)
Note to CATV system installer:
AV input (stereo)
This reminder is provided to call the CATV system installer's attention to Article 820-
40 of the NEC that provides guidelines for proper grounding and, in particular, speci-
fies that the cable ground shall be connected to the grounding system of the building
as close to the point of cable entry as practical.
VHF/UHF
Combination Antenna
(Not supplied)
CLOSED CAPTION
This TV can receive C1 and C2 Caption and Text.
Notes:
(1)When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a
VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or
text.
(2)Captions and texts may not match the TV voice exactly.
(3)Interference may cause the closed caption system not to function properly.
(4)The caption or text characters will not be displayed while the menu display or functions dis-
play is shown.
Caption Mode
(1)Closed Caption Characters can be displayed on the TV screen only when the received broad-
cast signal contains Caption Signals.
(2)Paint-on mode: Displays input characters on the screen immediately.
Pop-on mode: Once characters are stored in memory, they are displayed all at once.
Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)
Note: If CAPTION C1 or C2 is selected but a Closed Caption signal is not included, characters
will not be displayed.
(5)If you see this screen:
Text Mode
(1)Displays the text on the screen by scrolling (max. 7 lines)
(2)If the received broadcast signal does not contain caption or text signals, no change will occur.
If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To
clear screen, select CAPTION C1, C2 or CAPTION [OFF].
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION FOR USE
3) Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.
4) Use the CH(annel) ▲ or ▼ button to select the channel you wish to put
into memory or to erase from memory.
Note: The display will return to the normal screen automatically in about
10 seconds.
ADD/DELETE
AUTO MEMO
LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the proce-
dure below.
STEREO
[ON]
PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
1) Connect the power cord to a standard AC outlet.
Note: If some digits appear in the corner of the screen,
press the POWER button without unplugging the power cord.
2) Press the POWER button to turn on the TV.
3) Press the MENU button so that the menu display appears
on the TV screen.
4) Press the CH(annel) ▲ or ▼ button to point to "[ENGLISH]".
5) Select "ENGLISH" or "FRANÇAIS" = French by using
the VOL(ume) ▲ or ▼ button.
Perform "ADD/DELETE" function while this display appears on the screen.
Press the VOL(ume) ▲ or ▼ button to light up the channel number
●
in LIGHT BLUE if you wish to add the channel into memory.
Press the VOL(ume) ▲ or ▼ button to light up the channel number
●
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
STEREO SOUND SYSTEM
6) Press the MENU button to exit the menu.
This function suppresses noise, restores the dynamic range and electronically
expands the stereo signal to create a more spacious sound effect.
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
Then, press the VOL(ume) ▲ button.
3) Press the CH(annel) ▲ or ▼ button so that "STEREO" is selected.
4) Press the VOL(ume) ▲ or ▼ button to select the stereo mode on or off.
Stereo sound is effective when "STEREO" is on.
PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
CHANNEL PRESETTING
Note:You MUST PRESET channels BEFORE using CHANNEL ▲ or ▼ button.
To preset a channel or to change a preset channel, follow the procedure below.
1) Press the POWER button to turn on the TV.
2) Press the MENU button so that the menu display appears
on the TV screen.
3) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
Then, press the VOL(ume) ▲ button.
PICTURE
PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
4) Press the CH(annel) ▲ or ▼ button to point to "AUTO MEMO".
Then, press the VOL(ume) ▲ button.
ADD/DELETE
AUTO MEMO
ADD/DELETE
AUTO MEMO
ADD/DELETE
AUTO MEMO
The tuner scans and memorizes all active channels in your area.
STEREO
[ON]
STEREO
[OFF]
●
●
●
●
The TV distinguishes between standard TV channels and cable (CATV)
channels.
When AUTO MEMO action is completed, the lowest memorized channel reappears on the
screen.
When you press the CH(annel) ▲ or ▼ button after selecting AUTO MEMO,
the tuner will stop at the memorized channels only.
The TV may memorize TV channels as CATV channels if the reception conditions are poor. If
this happens, try the AUTO MEMO action again when reception conditions are better.
STEREO
[ON]
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
Then, press the VOL(ume) ▲ button.
PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
OPERATIONS
●
GAME MODE
In the above steps, the picture adjustment
display will disappear from the TV screen
automatically after about 10 seconds if you
do not press any buttons. Press the MENU
and VOL(ume) ▲ button so that "PIC-
TURE" is selected. Then, press the
WATCHING A TV PROGRAM
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel) ▲ or ▼ button.
3) Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.
Set to the most suitable position for TV
GAME.
[+] : ON [-] : OFF
BRIGHT
Adjust until the darkest parts of the picture are
as bright as you prefer.
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
CH(annel) ▲ or ▼ button repeatedly until
the display returns to the screen.
[+] : increase brightness [-] : decrease brightness
●
If you adjust any picture control after you
set the Game mode to [ON], the Game mode
is set to [OFF] automatically.
SETTING THE SLEEP TIMER
CONTRAST
Adjust to increase or decrease contrast.
The sleep timer function allows you to have the power automatically turn off
after a set time period.
1) Press the POWER button to turn on the TV and press the SLEEP button
on the remote control .
[+] : increase contrast [-] : decrease contrast
[USING THE GAME BUTTON]
COLOR
Adjust to be brilliant or pale color.
You may also set the Game mode and external
input mode at the same time by pressing the
GAME button on the remote control. “GAME”
appears on the TV screen.
[+] : be brilliant color [-] : be pale color
2) You may change the sleep time by pressing the SLEEP
TINT
SLEEP 10
Adjust to obtain natural skin tones.
button on the remote control repeatedly. The timer can be
●
To exit the Game mode and external input
[+] : greenish tone [-] : reddish tone
SHARPNESS
Adjust to detail in the picture.
set up to 90 minutes, 10 minutes each time the SLEEP
button is pushed. (The timer display counts up and sleep
mode, press the GAME button on the remote
control again.
To cancel the sleep timer:
Press the SLEEP button repeated-
●
To cancel the Game mode only, adjust the
timer will be displayed on the screen when you press the
ly until "SLEEP 0" is displayed.
picture control. In this case, “VIDEO” instead
of “GAME” appears on the TV screen.
[+]:increase sharpness [-]:decrease sharpness
SLEEP button on remote control.)
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the
sleep time will be lost.
●
Notes:
If you press the GAME button when the TV
●
“+” is achieved by pressing the VOL(ume)
is off, the TV turns on and will be in the
Game mode and external input mode auto-
matically.
▲ button and “-” by pressing the VOL(ume)
▼ button.
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded tapes, etc.
with either a dialogue caption or text display
added to the program.
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) ▲ or ▼ button to point
to "CAPTION".
: Press the CH(annel) ▲ or ▼ button.
3) Press the VOL(ume) ▲ or ▼ button to select
the mode you wish.
[-]
OFF
[+]
ON
[-]
[+]
[-]
[+]
[-]
[+]
[-]
[+]
[-]
[+]
GAME MODE
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
4) When done, press the MENU button to exit
the menu.
: Press the VOL(ume) ▲ or ▼ button.
V-CHIP SET UP
V-CHIP enables parents to prevent their chil-
dren from watching inappropriate material on
TV.
PICTURE
PICTURE
PICTURE
PICTURE
PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION
[
C1]
CAPTION
[
C2]
CAPTION
[
T1]
CAPTION
[
T2]
To block certain ratings, follow the steps below.
●
Programming may be rated by the Motion
Picture Association of America (MPAA) or
according to the Television Parental
V-CHIP reads the ratings for programming
(except for news and sports programs, unedited
movies on premium cable channels, and
Emergency Broadcast System signals), then
denies access to programming if the program's
rating meets or exceeds the limitations you
select. In this
Guidelines. In order to block any inappropri-
ate programming, set your limits in both
places (MPAA RATING and TV RATING).
You cannot access the menu when the "PRO-
TECTED PROGRAM by ..." message
appears. In this case, change to an unblocked
channel, then press the MENU button.
PICTURE ADJUSTMENT
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume) ▲ button so that "PICTURE" is selected.
3) Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the
●
case, "PROTECTED PROGRAM by ..." mes-
sage appears on the TV screen.
VOL(ume) ▲ or ▼ button.
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONS (Continued)
When you select TV-Y7, TV-PG, TV-14, or
TV-MA and you press the VOL(ume) ▲ but-
ton, the sub-ratings will appear on the TV
screen.
If you select the rating category (example: TV-
PG) and turn it to [BLOCK] or [VIEW], the
sub-ratings (example: V for Violence) will turn
[BLOCK] or [VIEW] automatically.
You can set the sub-ratings to [BLOCK] or
[VIEW] individually when the rating category
is set to [BLOCK]. To set the sub-ratings indi-
vidually, follow the steps below.
[MPAA RATING SET UP]
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) ▲
or ▼ button to point to
[TV RATING SET UP]
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) ▲
or ▼ button to point to
"V-CHIP SET UP".
Then, press the
VOL(ume) ▲ button.
3) Press the CH(annel) ▲
or ▼ button to point to
"TV RATING".
Then, press the
VOL(ume) ▲ button.
4) Press the CH(annel) ▲
or ▼ button to point to
PICTURE
CHANNEL SET
[ENGLISH] FRANÇAIS
PICTURE
CHANNEL SET
[ENGLISH] FRANÇAIS
B V-CHIP SET UP
"V-CHIP SET UP".
B V-CHIP SET UP
CAPTION [OFF]
CAPTION [OFF]
Then, press the
VOL(ume) ▲ button.
3) Press the CH(annel) ▲
or ▼ button to point to
"MPAA RATING".
TV RATING
B TV RATING
MPAA RATING
B MPAA RATING
●
When you select [TV-Y7]:
Then, press the
Press the CH(annel) ▲ or ▼ button to select
"FV" (Fantasy Violence). Then, press the
VOL(ume) ▲ button to select [BLOCK] or
[VIEW].
VOL(ume) ▲ button.
4) Press the CH(annel) ▲
or ▼ button to point to
your desired item.
Then, press the
B G
PG
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
B TV-Y
TV-Y7(
TV-G
TV-PG(
TV-14(
TV-MA(
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
)
your desired
PG-13
R
NC-17
X
TV-Y7
[BLOCK]
item.Then, press the
VOL(ume) ▲ button to
select [BLOCK] or
[VIEW].
)
)
)
FV
[BLOCK]
VOL(ume) ▲ button
to select [BLOCK] or
[VIEW].
●
When you select [TV-PG], [TV-14] or [TV-MA]:
Press the CH(annel) ▲ or ▼ button to select
"D" (Suggestive Dialog), "L"(Coarse
Language), "S"(Sexual Situation), or "V"
(Violence).
<Selection> <Rating Category Explanations>
<Selection> <Rating Category Explanations>
• G:
• PG:
General Audience
Parental Guidance suggested.
• TV-Y:
Appropriate for all children
Appropriate for children seven and
older
• TV-Y7:
• PG-13: Unsuitable for children under 13
• R:
Restricted; under 17 requires accompany
ing parent or adult guardian
• TV-G:
General Audience
• TV-PG:
• TV-14:
• TV-MA:
Parental Guidance suggested.
Unsuitable for children under 14
Mature audience only
Then, press the VOL(ume) ▲ button to
select [BLOCK] or [VIEW].
• NC-17: No one under 17 admitted
• X: Mature audience only
TV-PG
[BLOCK]
●
When you select the rating category and turn
it to [BLOCK], the higher rating will turn
[BLOCK] automatically. Also, the lower rat-
ing will turn [VIEW] automatically.
●
When you select the rating category and turn
it to [BLOCK], the higher rating will turn
[BLOCK] automatically. Also, the lower rat-
ing will turn [VIEW] automatically.
D
L
S
V
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
●
●
When you turn "G" to [BLOCK] or [VIEW],
the all ratings will turn to [BLOCK] or
[VIEW] automatically.
When you turn "X" to [VIEW], then all rat-
ings will turn to [VIEW] automatically.
●
●
When you turn "TV-Y" to [BLOCK] or
[VIEW], then all ratings will turn to
[BLOCK] or [VIEW] automatically.
When you turn "TV-MA" to [VIEW], then
all ratings will turn to [VIEW] automatically.
Note: When you select [TV-MA], "D" does
not appear on the TV screen.
●
The sub-ratings which set to [BLOCK]
appear next to the rating category in the TV
RATING menu.
5) Press the MENU button to exit the menu.
TV-Y
TV-Y7 (
TV-G
[VIEW]
)[VIEW]
[BLOCK]
TV-PG (DLSV)[BLOCK]
TV-14 (DLSV)[BLOCK]
TV-MA ( LSV)[BLOCK]
5) Press the MENU button to exit the menu.
TROUBLESHOOTING GUIDE
MAINTENANCE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-
looked possibilities. Before arranging for service, check these items. It could save you time and money.
CABINET CLEANING
PICTURE TUBE CLEANING
●
Wipe the front panel and other exterior sur-
Wipe the picture tube of the TV with a soft
cloth. Before cleaning the picture tube, discon-
nect the power cord.
faces of the TV with a soft cloth immersed
in lukewarm water and wrung dry.
Never use a solvent or alcohol. Do not spray
●
insecticide liquid near the TV. Such chemi-
cals may cause damage and discoloration to
the exposed surfaces.
QUICK SERVICE CHECK LIST
POSSIBLE REMEDY
SUPPLIED ACCESSORIES
Try a new channel, if OK, then possible station trouble.
Owner’s Manual
(0EMN02281)
Remote control unit
Is TV plugged in?
Power at outlet?
Owner’s
Manual
(N0108UD or N0132UD)
Is TV’s POWER button on?
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Batteries ("AA" x 2)
Turn off with POWER button and then turn it on after about a minute.
Adjust COLOR control.
SPECIFICATIONS
Adjust CONTRAST & BRIGHT control.
Check batteries in Remote Control.
Move the TV away from the nearby appliances which have Magnetism.
Turn off using the POWER button, then turn it on again 30 minutes or so later.
GENERAL SPECIFICATIONS
ELECTRICAL SPECIFICATIONS
Television system:
NTSC-M
Sound output:
1W, 8 ohm x2
TV Standard
Closed Caption Problem
Possible Remedy
Closed Caption
System:
OTHER SPECIFICATIONS
My TV is showing captions that are
misspelled.
You are watching a live broadcast and spelling errors made by the
closed captioning production company may pass through uncorrect-
ed. A prerecorded program will not show any misspelled words
because of the normal time available for editing the captions.
§15.119/FCC
Remote control:
Digital encoded
Channel coverage
VHF:
infrared light system
2 ~ 13
Operating
temperature:
UHF:
14 ~ 69
5°C to 40°C
(41°F~104°F)
CATV:
2 ~ 13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
181 channel
frequency synthesized
tuning system
Direct access keyboard,
programmable
scan and up/down
My TV will not show the text in its entirety Captions that are delayed a few seconds behind the actual dialogue
or there is a delay of what is being said.
are common for live broadcasts. Most captioning production compa-
nies can display a dialogue to a maximum of 220 words per minute.
If a dialogue exceeds that rate, selective editing is used to insure that
the captions remain up-to-date with the current TV screen dialogue.
Power requirements: AC120V, 60Hz
Power consumption
Tuning System
Channel access:
(Maximum):
Picture tube:
Dimensions:
110W
27"
My captions are scrambled with white
boxes on the TV screen.
Interference caused by building, power lines, thunderstorms, etc.
may cause scrambled or incomplete captions to appear.
H : 22-1/16” (560mm)
W: 26” (660mm)
D : 19-11/16” (500mm)
77.2 lbs. (35kg)
My program guide listed a TV show as
being closed captioned
but none of the captions were displayed.
Broadcasters may at times use a time compression process to the
actual program so that additional advertising time can be given.
Since the decoder cannot read the compressed information, captions
will be lost.
Weight:
Terminals
Antenna input:
VHF/UHF/CATV
75 ohm unbalanced
(F-type)
•Designs and specifications are subject to
change without notice and without our
legal obligation.
•If there is a discrepancy between languages,
the default language will be English.
My prerecorded videotape does not show
any captions. The tape box mentions it
being closed captioned.
The videotape was either an illegal copying or the tape duplicating
company accidentally left out the captioning signals during the
copying process.
Video input:
Audio input:
RCA connector x 2
(1 x Front / 1 x Rear)
RCA connector x 4
My TV screen shows a black box on certain You are in the TEXT mode. Select CAPTION mode or CAPTION
channels. [OFF].
(2 (L/R) x Front / 2 (L/R) x Rear)
Stereo Sound System
2 speakers
As an ENERGY STAR® Partner, our company has determined that this product meets
the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark.
Download from Www.Somanuals.com. All Manuals Search And Download.
|