Sylvania TV DVD Combo 6615LDF User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

9.Ventilation-Slots and openings in the cabinet and the back

or bottom are provided for ventilation and to ensure reliable

operation of the unit and to protect it from overheating, and

these openings must not be blocked or covered. The open-

ings should never be blocked by placing the unit on a bed,

sofa, rug, or other similar surface. This unit should never be

placed near or over a radiator or heat register. This unit

should not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or

the manufacturer’s instructions have been adhered to.

14.Lightning-For added protection for this unit receiver dur-

ing a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall

outlet and disconnect the antenna or cable system. This will

prevent damage to the unit due to lightning and power-line

surges.

15.Power Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact with them

might be fatal.

10.Power Sources-This unit should be operated only from the

type of power source indicated on the marking label. If you

are not sure of the type of power supply to your home, con-

sult your appliance dealer or local power company. For the

units intended to operate from battery power, or other

sources, refer to the operating instructions.

16.Overloading-Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry-Never push objects of any kind

into this unit through openings as they may touch danger-

ous voltage points or short out parts that could result in a

fire or electric shock. Never spill liquid of any kind on the

unit.

11.Grounding or Polarization-This unit is equipped with a

polarized alternating-current line plug(a plug having one

blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try revers-

ing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat the

safety purpose of the polarized plug.

18.Servicing-Do not attempt to service this unit yourself as

opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified

service personnel.

12.Power-Cord Protection-Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying par-

ticular attention to cords at plugs, convenience receptacles,

and the point where they exit from the appliance.

19.Damage Requiring Service-Unplug this unit from the wall

outlet and refer servicing to qualified service personnel

under the following conditions:

a. When the power-supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into the

unit.

13.Outdoor Antenna grounding-If an outside antenna or

cable system is connected to the unit, be sure the antenna

or cable system is grounded so as to provide some protec-

tion against voltage surges and built-up static charges.

Article 810 of the National Electrical Code, ANSI/NFPA

No. 70, provides information with respect to proper

grounding of the mast and supporting structure, grounding

of the lead-in wire to an antenna discharge unit, size of

grounding conductors, location of antenna-discharge unit,

connection to grounding electrodes, and requirements for

the grounding electrode. (Fig. A)

c. If the unit has been exposed to rain or water.

d. If the unit does not operate normally by following the oper-

ating instructions. Adjust only those controls that are cov-

ered by the operating instructions, as improper adjustment

of other controls may result in damage and will often

require extensive work by a qualified technician to restore

the unit to its normal operation.

e. If the unit has been dropped or damaged in any way.

f. When the unit exhibits a distinct change in performance,

this indicates a need for service.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

20.Replacement Parts-When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer that have the same character-

istics as the original part. Unauthorized substitutions may

result in fire, electric shock, injury to persons or other haz-

ards.

ANTENNA

LEAD I N

WI RE

GROUND

CL AMP

21.Safety Check-Upon completion of any service or repairs to

this unit, ask the service technician to perform routine safe-

ty checks to determine that the unit is in proper operating

condition.

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

22.Heat-This unit product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

ELECTRI C

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC

NATIONAL ELECTRICAL CODE

S2898A

- 3 -

Download from Www.Somanuals.com. All Manuals Search And Download.

PRECAUTIONS

IMPORTANT COPYRIGHT INFORMATION

LASER SAFETY

Unauthorized copying, broadcasting, public performance

and lending of discs are prohibited.

This unit employs a laser. Only a qualified service person

should remove the cover or attempt to service this device,

due to possible eye injury.

This product incorporates copyright protection technology

that is protected by U.S. patents and other intellectual prop-

erty rights. Use of this copyright protection technology must

be authorized by Macrovision, and is intended for home and

other limited viewing uses only unless otherwise authorized

by Macrovision. Reverse engineering or disassembly is pro-

hibited.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS

OR PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIA-

TION WHEN OPEN AND INTERLOCK DEFEATED.

DO NOT STARE INTO BEAM.

FCC WARNING- This equipment may generate or use

radio frequency energy. Changes or modifications to

this equipment may cause harmful interference unless

the modifications are expressly approved in the instruc-

tion manual. The user could lose the authority to oper-

ate this equipment if an unauthorized change or modi-

fication is made.

LOCATION: INSIDE, NEAR THE DECK MECHA-

NISM.

This Class B digital apparatus complies with Canadian

ICES-003.

RADIO-TV INTERFERENCE

Cet appareil numérique de la classe B est conforme à la

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reason-

able protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful inter-

ference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference

by one or more of the following measures:

norme NMB-003 du Canada.

CAUTION: TO PREVENT ELECTRIC SHOCK,

MATCH WIDE BLADE OF PLUG TO WIDE SLOT,

FULLY INSERT.

ATTENTION: POUR ÉVITER LES CHOC

ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS

LARGE DE LA FICHE DANS LA BORNE CORRE-

SPONDANTE DE LA PRISE ET POUSSER JUSQU’AU

FOND.

A NOTE ABOUT RECYCLING

Batteries should never be thrown away or incinerated but

disposed of in accordance with your local regulations con-

cerning chemical wastes.

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and

receiver.

3) Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV techni-

cian for help.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE

TO RAIN OR MOISTURE.

THIS SYMBOL INDICATES THAT

DANGEROUS VOLTAGE

CONSTITUTING A RISK OF ELECTRIC

SHOCK IS PRESENT WITHIN THIS UNIT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT THERE

CAUTION: TO REDUCE THE RISK OF ELECTRIC

ARE IMPORTANT OPERATING AND

SHOCK, DO NOT REMOVE COVER (OR BACK). NO

MAINTENANCE INSTRUCTIONS IN THE

USER SERVICEABLE PARTS INSIDE. REFER

LITERATURE ACCOMPANYING THE

SERVICING TO QUALIFIED SERVICE PERSONNEL.

APPLIANCE.

The caution marking is located on the rear of the cabinet.

- 4 -

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCATION

SYMBOLS USED IN THIS MANUAL

The following symbols below appear in some head-

ings in this manual.

For safe operation and satisfactory performance of

your unit, keep the following in mind when selecting

a place for its installation:

Shield it from direct sunlight and keep it away

from sources of intense heat.

•

: Description refers to playback of DVD video discs

(in the DVD mode).

Avoid dusty or humid places.

Avoid places with insufficient ventilation for proper

heat dissipation. Do not block the ventilation holes

at the top or bottom of the unit. Do not place the

unit on a carpet because this will block the ventila-

tion holes.

•

: Description refers to playback of Audio CDs

(in the DVD mode).

Install unit in a horizontal position.

Avoid locations subject to strong vibration.

Do not place the unit near strong magnetic fields.

Avoid moving the unit to locations where tempera-

•

: Description refers to playback of CDs with MP3

files (in the DVD mode).

•

ture differences are extreme.

QUICK

Be sure to remove a disc and unplug the AC power

cord from the outlet before carrying the unit.

•

: Description refers to the items to be set by the

QUICK mode (in the DVD mode).

AVOID THE HAZARDS OF

ELECTRICAL SHOCK AND FIRE

Do not handle the power cord with wet hands.

Do not pull on the power cord when disconnecting

it from an AC wall outlet. Grasp it by the plug.

TILT STAND

You can adjust the stand to change the angle of the

TV (-5° to 10°).

•

If by accident, water is spilled on your unit, unplug

the power cord immediately and take the unit to our

Authorized Service Center for servicing.

•

10°

-5°

Do not put your fingers or objects into the unit

disc slot.

•

Do not place anything directly on top of the unit.

•

WARNING

Moisture condensation may occur inside the unit

when it is moved from a cold place to a warm place

or after heating a cold room or under conditions of

high humidity. If a DVD is played in a unit which

has moisture, it may damage the DVD and the unit.

Therefore when the condensation occurs inside the

unit, turn the unit on and allow at least 2 hours for

the unit to dry out.

- 5 -

Download from Www.Somanuals.com. All Manuals Search And Download.

TABLE OF CONTENTS

SUPPLIED ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . . . . . . . .2

SEARCH FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . .22

TRACK SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . .22

TITLE / CHAPTER SEARCH . . . . . . . . . . . . . . . . . . .22

TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

MARKER SETUP SCREEN . . . . . . . . . . . . . . . . . . . .23

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

LOCATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

AVOID THE HAZARDS OF

SPECIAL PLAYBACK FUNCTION . . . . . . . . . . . . . . . . .24

REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

A-B REPEAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

RANDOM PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .25

ELECTRICAL SHOCK AND FIRE . . . . . . . . . . . . . . . .5

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . . . .5

TILT STAND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . .6

FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

CHANGING THE SETTINGS . . . . . . . . . . . . . . . . . . . . .26

SUBTITLE LANGUAGE . . . . . . . . . . . . . . . . . . . . . . .26

AUDIO LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . .26

STEREO SOUND MODE . . . . . . . . . . . . . . . . . . . . . .26

CAMERA ANGLE . . . . . . . . . . . . . . . . . . . . . . . . . . .27

BLACK LEVEL SETTING . . . . . . . . . . . . . . . . . . . . . .27

VIRTUAL SURROUND . . . . . . . . . . . . . . . . . . . . . . . .27

OPERATING CONTROLS AND FUNCTIONS . . . . . . . . . .8

INSTALLING THE BATTERIES . . . . . . . . . . . . . . . . . .9

PREPARATION FOR USE . . . . . . . . . . . . . . . . . . . . . . .10

ANTENNA/CABLE CONNECTION . . . . . . . . . . . . . . .10

EXTERNAL CONNECTION . . . . . . . . . . . . . . . . . . . . .11

THE ON-SCREEN INFORMATION . . . . . . . . . . . . . . . . .28

TV SECTION

CHANGING THE DVD SET UP ITEMS . . . . . . . . . . . . . .29

CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

D LANGUAGE SETTING . . . . . . . . . . . . . . . . . . . . .29

E DISPLAY SETTING . . . . . . . . . . . . . . . . . . . . . . . .30

F AUDIO SETTINGS . . . . . . . . . . . . . . . . . . . . . . . .30

TV OPERATION AND SETTINGS . . . . . . . . . . . . . . . . .12

WATCHING A TV PROGRAM . . . . . . . . . . . . . . . . . .12

CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .13

PICTURE CONTROL . . . . . . . . . . . . . . . . . . . . . . . . .14

BACK LIGHT SETTING . . . . . . . . . . . . . . . . . . . . . . .14

SLEEP TIMER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

CLOSED CAPTION SYSTEM . . . . . . . . . . . . . . . . . .15

MTS (Multi-Channel Television Sound) System . . . . . .15

V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

PARENTAL CONTROL . . . . . . . . . . . . . . . . . . . . .31

OTHER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . .31

INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

TROUBLESHOOTING GUIDE . . . . . . . . . . . . . . . . . . . .33

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

TV RATING SET UP . . . . . . . . . . . . . . . . . . . . . . .16

DISC HANDLING . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

B MPAA RATING SET UP . . . . . . . . . . . . . . . . . . . .17

C CHANGE ACCESS CODE . . . . . . . . . . . . . . . . . .17

MENU LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . .17

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

DVD SECTION

ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . . . . .18

UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . .18

PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . .19

DISC MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

TITLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

RESUME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

PAUSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

STEP BY STEP PLAYBACK . . . . . . . . . . . . . . . . . . .20

FAST FORWARD / FAST REVERSE . . . . . . . . . . . . .21

SLOW FORWARD / SLOW REVERSE . . . . . . . . . . . .21

ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

- 6 -

Download from Www.Somanuals.com. All Manuals Search And Download.

FEATURES

TV Mode

MTS/SAP Tuner

Infrared remote control

Trilingual on screen TV setup display available in

English, Spanish or French

181 channel capability PLL frequency synthesizer

tuner with direct station call (A converter may be

necessary to view scrambled cable channels.)

Auto power off system–If there is no air signal input

from the antenna terminal and no operation for 15

minutes, the unit will turn itself off automatically.

Sleep timer–Allows you to have the unit automati-

cally turn off at a desired time.

•

V-CHIP–Enables parents to prevent their children

from watching inappropriate material on TV.

Closed Caption Decoder–You may view specially

•

labeled (cc) TV programs, movies, news, etc. with

either a dialogue caption or text display added to

the program.

DVD Mode

Dolby Digital sound

Parental lock

You can set the control level to limit playback of

discs which may not be suitable for children.

•

This unit can handle Dolby Digital surround sound

having 5.1 channels when connected to a Dolby

Digital decoder.

Automatic detection of discs

This unit automatically detects if the loaded disc is

DVD, Audio CD or MP3 on disc.

Still/fast/slow/step playback

•

Various playback modes are available including

still pictures, fast forward/reverse, slow motion and

step frames.

On-screen display

Information about the current operation can be dis-

played on a TV screen, allowing you to confirm

the currently active functions (such as program

playback), on the TV screen using the remote con-

trol.

Random playback for Audio CD and MP3

This unit can shuffle the order of tracks to play

them in random order.

•

Program playback for Audio CD and MP3

You can program the order of tracks to play them

in any desired order.

•

Chapter search / Title search / Track search / Time

DVD menus in a desired language

You can display DVD menus in a desired lan-

guage, if available on a DVD.

•

Repeat

•

Chapter / Title / Track / Group / All / A-B

Screen saver

Zoom

•

If the screen saver program is set to ON, it starts

when there is no input from the unit for 5 minutes

in stop mode.

Allows you to enlarge video image.

Marker

The part designated by user can be called back.

Subtitles in a desired language

You can select a desired language for the display

subtitles, if that language is available on a disc.

•

Resume Play

User can resume to playback from the part at

which the play was stopped.

Selecting a camera angle

You can select the desired camera angle, if a disc

contains sequences recorded from different angles.

•

Virtual Surround

Bit rate indication

•

Choices for audio language and sound mode

•

DRC (Dynamic range control)

You can control the range of sound volume.

You can select the desired audio language and

sound mode, if different languages and modes are

available on a disc.

- 7 -

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING CONTROLS AND FUNCTIONS

NOTE

When you select DVD mode, press [SELECT], [PLAY ] or [EJECT A] first or insert a disc into the

•

disc slot. Otherwise, the DVD features are not operated.

- REMOTE CONTROL

For DVD mode (P.28):

ress to display the current status on the TV screen.

9.SETUP button (P13, P.29)

POWER PICTURE SELECT

EJECT

CH.

Press to enter or exit the setup menu of TV/DVD.

10. TITLE button (P.20)

Press to display the title menu.

11. CLEAR button (P12, P.22)

Press to clear/cancel a setting currently entered.

Press to clear “DISC INSIDE” display.

SLEEP

+100

VOL.

12. MODE button (P.25)

+10

Press to call up the program/random screen in

stop mode.

SKIP

ZOOM

MUTE

Press to call up the Black Level Setting/Virtual

Surround screen during playback.

PLAY

STOP

REV

FWD

13. SEARCH MODE button (P.22, P23)

DISC

Press to locate a desired point.

PAUSE SLOW

DISPLAY

14. AUDIO button (P.26)

For TV mode (P.15): Press to select TV sound

mode (STEREO/SAP/MONO).

ENTER

SETUP

TITLE

RETURN

For DVD mode ^(P.26): Press to select a desired

audio language (if available).

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

MODE

15. EJECT A button (P.19)

Press to remove a disc from the unit.

16. SELECT button (P.12)

Press to select the TV mode, external input mode

or DVD mode.

[Fig. 1]

17. CH. K / L buttons (P.12)

1.POWER button (P.12)

Press to turn the power on and off.

2.PICTURE button (P.14)

Press to adjust the picture.

Press to select memorized channels.

18. VOL. X / Y buttons (P.12)

Press to control the volume level for the DVD

and TV.

3.Number buttons (P.13)

19. MUTE button (P.12)

Press to select a desired channel number directly.

+100 button (For TV mode)

Press to mute the sound or press it again to

restore sound.

Press to select channels higher than 99.

+10 button (For DVD mode)

20. ZOOM button (P.21)

Press to enlarge the part of a DVD-reproduced

image.

Press to enter desired numbers higher than 9.

4.SLEEP button (P.14)

Press to set the Sleep Timer.

5.SKIP H / G buttons (P.22)

Press once to skip chapters/tracks to a desired point.

6.PLAY O button (P.19)

Press to playback the disc.

7.PAUSE F button (P.20)

Press to pause the current disc operation.

8.DISPLAY button

For TV mode (P.15):

Press to display the current channel number on

the TV screen.

21. REV h button (P.21)

Press to view the DVD picture in fast/slow

reverse motion.

FWD g button (P.21)

Press to view in fast/slow forward motion.

22. STOP C button (P.19)

Press to stop operation of the disc.

23. DISC MENU button (P.20)

– Calls up the DVD menu.

– Calls up the file list in MP3 disc.

24. ENTER button (P.16)

Press to accept a setting.

- 8 -

Download from Www.Somanuals.com. All Manuals Search And Download.

28. ANGLE button (P.27)

25.

(Up) /

(Down) / { (Left) / B (Right) buttons

Press to change the camera angle to see the

sequence being played back from a different angle

(if available).

Press to select or adjust menu items.

26. RETURN button (P.27)

Press to return to the previous screen in the setup

menu.

29. REPEAT button (P.24)

Repeats playback of the current disc, title, chap-

ter, group or track.

27. A-B button (P.24)

Press to repeat the playback of a selected section.

30. SUBTITLE button (P.26)

Press to select a desired subtitle language.

- FRONT PANEL

31. C STOP button (P.19)

Press to stop operation of the disc.

32. Remote sensor window

33. MENU button

Press to enter or exit the setup menu of TV/DVD.

34. VOLUME X / Y buttons (P.12)

Press to control the volume level for the DVD

and TV.

35. CHANNEL K / L buttons (P.12)

Press to select memorized channels.

36. SELECT button (P.12)

Press to select to TV mode, external input mode

or DVD mode.

C STOP

B PLAY A EJECT

37. POWER button (P.12)

POWER

Press to turn the power on and off.

VOLUME

CHANNEL

SELECT

38. A EJECT button (P.19)

Press to remove a disc from the unit.

39. B PLAY button (P.19)

31 32 33 34

35 36 37 38 39

Press to playback of the disc.

[Fig. 2]

INSTALLING THE BATTERIES

BATTERY PRECAUTIONS

1 Open the battery compartment cover by

pressing the cover on the remote unit in the

direction of the arrow.

Be sure to follow the correct polarity as indicated

•

in the battery compartment. Reversed batteries

may cause damage to the device.

2 Insert 2 “AA” penlight batteries into the bat-

tery compartment in the direction indicated by

the polarity (+/-) markings.

Do not mix different types of batteries together

(e.g. Alkaline and Carbon-Zinc) or old batteries

with fresh ones.

•

If the device is not to be used for a long period of

time, remove the batteries to prevent damage or

injury from possible battery leakage.

•

3 Replace the cover.

Do not try to recharge batteries not intended to be

recharged; they can overheat and rupture.

•

NOTE

We do not recommend the use of universal remote controls. Not all of the functions may be controlled

•

with a universal remote control.

If you decide to use a universal remote control with this unit, please be aware that the code number given

may not operate this unit. In this case, please call the manufacturer of the universal remote control.

- 9 -

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATION FOR USE

ANTENNA/CABLE CONNECTION

NOTE

Cables used here are commercially available.

For your safety and to avoid damages to the unit, unplug the antenna cable from the ANT. jack

before moving the unit.

•

- ANTENNA/CABLE CONNECTION

IF YOU HAVE A JACK ON THE WALL

Connect the TV to the wall-mounted antenna jack

with on RF cable (commercially available).

[Rear of this unit]

(

)

IF YOU HAVE A WIRED CABLE

Connect the TV to the wired antenna cable.

from Cable Company

or Satellite Antennna

NOTE

RF Cable

Before plugging the antenna into the ANT. jack of the

•

unit, check that the pin is not bent. If it is bent,

straighten the pin as illustrated, then plug the pin into

the ANT. jack of the unit.

Bent pin

Cable

Plug

(Needs to be

straightened)

(Straight pin)

- CABLE/SATELLITE BOX CONNECTION

WHEN USING CABLE BOX/SATELLITE

BOX

[Rear of this unit]

)

(

If your cable service supplies you with a converter

box or if you use a satellite system, you can use the

basic connection shown above.

Cable Box

or Satellite Box

Channel selection must be made with the converter

box or satellite box. This means that channels cannot

be changed using the remote control of this unit.

OUT

75-ohm

Coaxial Cable

ANT

from Cable Company

or Satellite Antenna

NOTE

For CATV system installer:

This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides

guidelines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding

system of the building as close to the point of cable entry as practical.

•

- 10 -

Download from Www.Somanuals.com. All Manuals Search And Download.

EXTERNAL CONNECTION

You can connect this unit to your own Audio/Video

[Rear of this unit]

equipment.

AUDIO

)

(

Be sure to turn off the power to all components in

•

the system before connecting another component.

VIDEO2

VIDEO1

Refer to the Owner’s Manuals for the equipments

to be connected to the unit.

•

NOTE

When you use external connections, select “VIDEO1” or

“VIDEO2” by pressing [SELECT]. (Refer to page 12.)

To use the VIDEO1 input jacks, select “VIDEO1”.

To use the VIDEO2 input jacks, select “VIDEO2”.

•

- VIDEO1 INPUT

Use this connection if your own A/V equipment (e.g.

VCR) has Video output and Audio out jacks. When

using S-Video cable, better picture is available.

ex.

Audio Cable

(OUT)

AUDIO

Video Cable

VIDEO1

VID

Video Cassette

Recorder

S-VIDEO

S-Video Cable (OUT)

NOTE

If your own equipment is monaural (has only one Audio jack), connect the Audio cable to AUDIO L jack of this unit.

If you connect Video jack and S-VIDEO jack simultaneously, the S-VIDEO jack is given priority over the VIDEO jack.

•

- VIDEO2 INPUT

Use this connection if your own A/V equipment (e.g.

video camera, video game) has COMPONENT

Video output (Y, Pb, Pr) jacks. You can enjoy the

best picture with this connection.

ex.

VIDEO2

(OUT)

Audio Cable

AUDIO

Video Camera

COMPONENT

Component

Video Cable

Video Game

- AUDIO OUTPUT

You can enjoy DVD sound with more

presence by connecting digital audio

equipment such as Dolby Digital decoder.

To COAXIAL DIGITAL

AUDIO INPUT jack

Home Audio System

DIGITAL

AUDIO OUT

(COAXIAL)

Dolby Digital decoder

NOTE

The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital sound by an MD or DAT deck.

If connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “BITSTREAM” for audio output in the setup mode. (Refer to page 30.)

Unless connected to a Dolby Digital decoder, set “DOLBY DIGITAL” to “PCM” for audio output in the setup mode. Playing

a unit using incorrect settings may generate noise distortion and may also damage the speakers. (Refer to page 30.)

•

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

- 11 -

Download from Www.Somanuals.com. All Manuals Search And Download.

TV SECTION

TV OPERATION AND SETTINGS

NOTE

For channel number selection with number

buttons:

POWER PICTURE SELECT

EJECT

CH.

To select single-digit channel number, press

•

[0] first. (e.g. Press [0] [2] for channel 2.)

To select cable channels which are higher

•

than 99, press [+100/+10] first.

(e.g. Press [+100/+10] [2] [5] for channel 125.)

SLEEP

+100

VOL.

4 Press [VOL. X / Y] to select the desired vol-

+10

ume level.

SKIP

ZOOM

MUTE

PLAY

STOP

VOL.

REV

FWD

VOLUME 20

DISC

PAUSE SLOW

DISPLAY

Press [MUTE] to instantly mute the sound.

Press it again to restore the previous volume

level.

•

ENTER

SETUP

TITLE

RETURN

NOTE

If you press [CH. K / L] in the DVD mode,

•

Shaded buttons are used for following operation.

•

you can change the TV channels. Even if you

turn off the unit in the DVD mode, when you

turn it on again, it will go into the TV mode.

WATCHING A TV PROGRAM

1 Plug the power cord into a standard

TO WATCH CABLE OR SATELLITE

CHANNEL

AC outlet.

If the unit is connected to a cable box or satellite

box, press [CH. K / L] to select CH3 or CH4

according to the output channel setting of the device

and select desired channel on that device.

NOTE

If any digits are displayed in the corner of the

•

screen, press [POWER] without unplugging

the power cord.

TO WATCH EXTERNAL INPUT

2 Press [POWER] to turn on the unit.

When an external equipment is connected to the front

AUDIO/VIDEO input jacks, press [SELECT] or

[CH. K / L] repeatedly until “VIDEO1” or

“VIDEO2” appears on the screen.

POWER

3 Press [CH. K / L] to select the desired chan-

NOTE

nel number.

If a disc is inside the unit, “DISC INSIDE” mes-

sage is displayed on the screen for 10 seconds.

•

CH.

Press the Number buttons to enter the

desired channel number.

DISC INSIDE

To clear the message instantly, press [CLEAR].

•

+100

+10

- 12 -

Download from Www.Somanuals.com. All Manuals Search And Download.

ADDING/DELETING CHANNELS

The channels you no longer receive or seldom watch

can be deleted from the memory. (Of course, you can

add the deleted channel into the memory again.)

CHANNEL SET UP

AUTO CHANNEL PROGRAMMING

As the initial setting, this unit has memorized all

channels, including the ones not available in your

area. This feature automatically puts only available

channels into the memory.

1 Press [SETUP] then press [K] or [L] to point

to “CHANNEL SET UP”.

- TV SET UP -

1 Press [SETUP] then press [K] or [L] to point

CHANNEL SET UP

V-CHIP SET UP

SETUP

LANGUAGE [ENGLISH]

to “CHANNEL SET UP”.

CAPTION

[OFF]

BACK LIGHT [BRIGHT]

- TV SET UP -

CHANNEL SET UP

V-CHIP SET UP

SETUP

LANGUAGE [ENGLISH]

CAPTION

[OFF]

2 Press [ENTER] then press [K] or [L] to point

BACK LIGHT [BRIGHT]

to “ADD/DELETE CH”.

– CHANNEL SET UP –

2 Press [ENTER] then press [K] or [L] to point

ADD / DELETE CH (CATV)

AUTO PRESET CH

ENTER

to “AUTO PRESET CH”.

– CHANNEL SET UP –

ADD / DELETE CH (CATV)

AUTO PRESET CH

ENTER

3 Press [ENTER] then press the Number but-

tons or [CH.

L] to select the desired

channel number.

3 Press [ENTER].

ENTER

The tuner scans and memorizes all the active

channels in your area.

The tuner stops on the lowest memorized channel.

+100

•

+10

ADD/DELETE

4 Press [ENTER] then the channel number

turned to red. The channel is deleted from

memory. If the channel number turned to

blue, the channel is added into memory.

NOTE

When “AUTO PRESET CH” is activated

•

where there is no TV signal input, “NO TV

SIGNAL” will appear on the display after the

completion of channel scanning.

ENTER

To delete another channel, repeat steps 3 to 4.

If you press [ENTER] again, the channel is

memorized again.

•

The unit may recognize CATV channels to be

TV channels if reception condition is poor. In

this case, check the antenna connection and try

“AUTO PRESET CH” again when reception

conditions are better.

Channel memory programming is NOT nec-

essary when connected to a cable box or satel-

lite box. Just select the channel for cable box

or satellite input (ex. CH3) on the unit, then

select your desired channel on the cable box

or satellite box.

•

Added channel : Light blue

Deleted channel : Light red

5 Press [SETUP] to exit the menu.

SETUP

NOTE

To confirm that channel(s) has been deleted

or added, press [CH. K / L].

•

- 13 -

Download from Www.Somanuals.com. All Manuals Search And Download.

POWER PICTURE SELECT

EJECT

NOTE

The picture control display will disapper automati-

cally after 10 seconds unless you press any buttons.

Magnetism from near by appliances and speakers

might affect the color of TV picture. If this hap-

pens, press [POWER] to turn off the TV and turn

it on again after about 30 minutes.

•

+100

SLEEP

VOL.

+10

ZOOM

SKIP

MUTE

PLAY

STOP

REV

FWD

DISC

BACK LIGHT SETTING

PAUSE SLOW

DISPLAY

1 Press [SETUP] then press [K] or [L] to point

ENTER

to “BACK LIGHT”.

SETUP

TITLE

RETURN

- TV SET UP -

CLEAR SEARCH MODE REPEAT

A-B

CHANNEL SET UP

V-CHIP SET UP

SETUP

LANGUAGE [ENGLISH]

CAPTION

[OFF]

BACK LIGHT [BRIGHT]

AUDIO SUBTITLE ANGLE

MODE

Shaded buttons are used for following operation.

•

2 Press [ENTER] then press [s] or [B] to

select to “BRIGHT”, “NORMAL” or “DARK”.

PICTURE CONTROL

ENTER

The unit’s picture controls, brightness, contrast,

color, tint and sharpness, are preset to factory speci-

fications. Although they are usually the best, you

may need to make some further adjustments for a

more natural looking image.

3 Press [SETUP].

SETUP

SLEEP TIMER

The Sleep Timer function turns off the unit without

1 Press [PICTURE] then press [K] or [L] to

select the desired control “BRIGHTNESS”,

“CONTRAST”, “COLOR”, “TINT” or “SHARP-

NESS”.

using [POWER] after a desired period of time.

1 Press [SLEEP].

PICTURE

BRIGHTNESS

SLEEP

SLEEP 0 MINUTE

2 Press

[s] or [B] to adjust to your desired

level within 5 seconds.

2 Press [SLEEP] repeatedly until the desired

sleep time is displayed.

SLEEP

Each press increases the time by 10 minutes up

•

BRIGHTNESS

CONTRAST

COLOR

to decrease

to increase

brightness

to increase

contrast

to 90 minutes.

brightness

to decrease

contrast

After 5 seconds, the Sleep Timer setting will

disappear automatically.

If you select “SLEEP 0 MINUTE”, Sleep Timer

setting is cancelled.

•

to pale

to brilliant

TINT

SHARPNESS

to purple

to soft

to green

to clear

Even if there is a power failure of any kind, the

unit will retain its memory for this feature.

•

- 14 -

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTE

CLOSED CAPTION SYSTEM

You can view specially labeled (cc) TV programs,

movies, news and pre-recorded tapes with either a

dialogue caption or text display.

Even if there is a power failure of any

kind, the unit will retain its memory for

this feature.

•

CAPTION mode: You can watch dramas, movies and

news while captioning the dialogues and the contents

of news.

TEXT mode: You can watch half screen text informa-

tion if you want.

1-2: You may get these captions or text information

by selecting either “1” or “2”. Caption “2” is usually

used for a second language if available.

MTS (Multi-Channel Television

Sound) System

TO SELECT TV SOUND MODE

1 Press [AUDIO] repeatedly to select the MTS

output mode.

NOTE

Not all programs are broadcast with closed cap-

AUDIO

•

tions. Your unit is designed to provide error free

closed captions from high quality antenna, cable

and VCR signals. Conversely, poor quality sig-

nals are likely to result in caption errors or no

captions at all. Common signal conditions which

may cause caption errors are listed below:

STEREO

The output mode changes as described below

every time you press [AUDIO].

STEREO

•

SAP*

MONO

Automobile ignition noise

Electric motor brush noise

Weak snowy reception on TV screen

Multiplex signal reception displaying picture

ghosts or airplane flutter

–

* Second Audio Program (SAP):

–

Sometimes broadcasters add another channel of

audio to the programs they air. This is usually a

secondary language or perhaps a radio station.

After 5 seconds, the current audio status will

disappear from the TV screen.

If the unit displays a black box on the TV

•

screen, this means that the unit is set to the

TEXT mode. To clear screen, select “CAP-

TION1”, “CAPTION2” or “OFF”.

•

NOTE

The initial setting is “STEREO”.

This setting is saved even if the unit is turned

off or the AC cord is unplugged.

•

TO CHECK THE SOUND STATUS

By pressing [DISPLAY], the status shown below

will appear on the display when you receive a broad-

cast on the unit tuner channel you are watching.

1 Press [SETUP] then press [K] or [L] to point

to “CAPTION”.

- TV SET UP -

CH 123

STEREO/SAP

CHANNEL SET UP

SETUP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION

[OFF]

BACK LIGHT [BRIGHT]

2 Press [ENTER] repeatedly to select the

desired caption menu “CAPTION1”, “CAP-

TION2”, “TEXT1” or “TEXT2”.

- TV SET UP -

1) When a program is broadcast in stereo,

“STEREO” appears on the TV screen.

CHANNEL SET UP

V-CHIP SET UP

2) When a program is broadcast in second audio,

LANGUAGE [ENGLISH]

ENTER

[CAPTION1]

CAPTION

“SAP” appears on the TV screen.

BACK LIGHT [BRIGHT]

3) When a program broadcast both in stereo and sec-

ond audio, “STEREO/SAP” appears on the TV

screen.

If you select “OFF”, Closed Caption System set-

ting is cancelled.

•

3 Press [SETUP] to exit the menu.

SETUP

- 15 -

Download from Www.Somanuals.com. All Manuals Search And Download.

TV RATING SET UP

CH.

Follow steps to in the V-CHIP SET UP.

SLEEP

+100

4 Press [K] or [L] to select the desired TV rat-

ing to be blocked then press [ENTER] repeat-

edly to set “BLOCK” or “VIEW”.

VOL.

+10

ZOOM

SKIP

MUTE

TV–Y

TV–Y7

TV–G

TV–PG (

TV–14

TV–MA(

[VIEW]

(

)

PLAY

STOP

ENTER

)

REV

FWD

(

DISC

PAUSE SLOW

DISPLAY

Selection

TV-Y

TV-Y7

TV-G

TV-PG

TV-14

Rating Category Explanations

Appropriate for all children

Appropriate for children seven and older

General Audience

Parental Guidance suggested.

Unsuitable for children under 14

ENTER

SETUP

TITLE

RETURN

Shaded buttons are used for following operation.

•

TV-MA Mature audience only

V-CHIP SET UP

NOTE

V-CHIP SET UP

This feature enables parents to prevent their children

from watching inappropriate material on TV. When

you try to access a program which is blocked, “PRO-

TECTED PROGRAM by ...” message appears on

the TV screen.

When you select a rating and set it to

•

“BLOCK”, the higher ratings will be blocked

automatically. The lower ratings will be avail-

able for viewing.

TV–Y

TV–Y7

TV–G

TV–PG (DLSV )

TV–14 (DLSV)

TV–MA ( LSV)

[VIEW]

(

)

[VIEW]

1 Press [SETUP] then press [K] or [L] to point

[BLOCK]

to “V-CHIP SET UP”.

- TV SET UP -

CHANNEL SET UP

V-CHIP SET UP

SETUP

When you set the lowest rating to “VIEW”, all

other ratings will automatically be available

for viewing.

•

LANGUAGE [ENGLISH]

CAPTION [OFF]

BACK LIGHT [BRIGHT]

2 Press [ENTER] then press the Number

5 When you select the ratings of TV-Y7, TV-PG,

TV-14 or TV-MA you will have the option of

setting sub rating categories.

Buttons to enter the access code.

ACCESS CODE

Press [K] or [L] to select a rating with sub-

ratings you wish to block, then press

[ENTER] twice.

ENTER

Press [K] or [L] to select a sub-rating, then

press [ENTER] to set it to “BLOCK” or “VIEW”.

For the first time set-up or in the event the unit

has lost power, enter the default code of 0000.

•

Selection

TV-Y7

Rating Category Explanations

3 Press [K] or [L] to select “TV RATING”,

“MPAA RATING” or “CHANGE CODE” then

Fantasy Violence

press [ENTER].

TV-PG, TV-14, TV-MA

– V-CHIP SET UP –

Suggestive Dialog (TV-PG, TV-14 only)

B TV RATING

MPAA RATING

Coarse Language

Sexual Situation

Violence

CHANGE CODE

ENTER

NOTE

TV RATING:

MPAA RATING: See

CHANGE CODE: See

See

TV RATING SET UP

MPAA RATING SET UP

CHANGE ACCESS CODE

The blocked sub-ratings will appear next to

the rating category in the “TV RATING”

menu.

•

- 16 -

Download from Www.Somanuals.com. All Manuals Search And Download.

Make sure you enter exactly the same new code

in the “CONFIRM CODE” space as one in the

“NEW CODE” space. If they are different, the

“NEW CODE” space is cleared for redoing.

6 Press [SETUP] to exit the menu.

•

SETUP

NOTE

5 Press [SETUP] to exit the menu.

To change the rating, the TV must be turned

•

SETUP

to an unprotected program. If “PROTECT-

ED PROGRAM by ...” appears on the

screen, please change the channel to a station

that is not protected.

NOTE

Your personal access code will be erased and

•

will return to the default (0000) when a

power failure occurs or when you turn off the

power using a wall switch. If you have for-

gotten the code, unplug the power cord for 10

seconds to restore the access code to 0000.

B ^{MPAA RATING SET UP}

Follow steps to in the V-CHIP SET UP on page

16.

4 Press [K] or [L] to point to your desired item,

then press [ENTER] to select “BLOCK” or

“VIEW”.

MENU LANGUAGE

1 Press [SETUP] then press [K] or [L] to point

[VIEW]

to “LANGUAGE”.

[VIEW]

PG–13

NC–17

[VIEW]

- TV SET UP -

[BLOCK]

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

BACK LIGHT [BRIGHT]

ENTER

Selection

Rating Category Explanations

General Audience

PG-13

Parental Guidance suggested.

Unsuitable for children under 13

Restricted; under 17 requires accompa-

nying parent or adult guardian

No one under 17 admitted

2 Press [ENTER] repeatedly to select

“ENGLISH”, “ESPAÑOL”= Spanish or

“FRANÇAIS”= French.

ENTER

NC-17

Mature audience only

3 Press [SETUP] to exit the menu.

When you select a rating and set it to “BLOCK”,

the higher ratings will be blocked automatically.

The lower ratings will be available for viewing.

When you set the lowest rating to “VIEW”, all other

ratings will automatically be available for viewing.

•

SETUP

NOTE

This function effects only the language on the

screen menu and not the audio source.

•

5 Press [SETUP] to exit the menu.

If for some reason the menu is in Spanish or

•

SETUP

French, press [SETUP], press [K] or [L] to

point to “IDIOMA [ESPAÑOL]” or “LAN-

GAGE [FRANÇAIS]”, then press [ENTER]

repeatedly to select desired language, then

press [SETUP].

CHANGE ACCESS CODE

Follow steps to in the V-CHIP SET UP on page

16.

4 Press the number buttons to enter your

desired access code in the “NEW CODE”

space, then enter the same code in the

“CONFIRM CODE” space. When completed,

the menu will return to “V-CHIP SET UP”.

NEW CODE

X X X X

CONFIRM CODE

- 17 -

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD SECTION

ABOUT THE DISCS

PLAYABLE DISCS

Recorded

signals

Playable

discs

Disc size

Disc type

Title 1

Region code

Mark (logo)

DVD-Video

* 1,2,4,6,10,11

DVD-RW

DVD-R

* 1,3,4,5,

6,7,9,10

Example

Title 2

Digital video 5 inches

(MPEG2)

Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1 Chapter 2

(12cm)

DVD+RW

DVD+R

* 1,3,4,5,

6,8,9,10

Audio CD

* 4,6,10

Digital audio

Audio CD

MP3

Example

Track 1 Track 2 Track 3 Track 4 Track 5 Track 6

5 inches

(12cm)

CD-RW

CD-R

* 4,5,6,9,10

Example

Digital audio

Group 1

Group 2

MP3

Track 1 Track 2 Track 3 Track 4 Track 5 Track 6

is a trademark of DVD Format/Logo Licensing Corporation.

If you cannot play back a disc which bears one of the marks above, check the following notes.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.

*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.

*3: Discs recorded in the VR (Video Recording) format cannot be played back.

*4: Scratched or stained discs may not be played back.

*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the

recorder or special properties of discs.

*6: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not

play them back. Even if they are played back, the sound or video quality will be compromised.

*7: You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand’s DVD recorder. However, depend-

ing on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth,

etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder.

*8: Only the discs recorded in the video format and finalized can be played back.

Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be

played back at all or normally (the picture or sound may not be smooth, etc.).

*9: If there is too much recording space left on a disc (the used portion is less than 2- / " (55mm) across), it may not play back properly.

*10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read it correctly.

*11: The number inside the symbol refers to a region of the world and a disc encoded in a specific region for-

mat can only be played back on unit with the same region code.

UNPLAYABLE DISCS

NEVER play back the following discs. Otherwise, the unit may result in malfunction.

•

DVD-RAM / CD-I / Photo CD / Video CD / DVD with region codes other than 1 or ALL /

DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers

Never insert a disc which is broken or whose form is abnormal (other than 5 inch (12cm) round disc).

•

On the following disc, the sound MAY NOT be heard.

•

Super Audio CD

NOTE

Only the sound recorded on the normal CD layer can be delivered.

The sound recorded on the high density Super Audio CD layer cannot be delivered.

Any other discs without compatibility indications

•

–

Download from Www.Somanuals.com. All Manuals Search And Download.

PLAYING A DISC

POWER PICTURE SELECT

EJECT

NOTE

When the DVD mode has been switched to the

TV mode, the DVD mode shuts down first and

then the TV picture and sound appears in about

4 seconds. Similarly, when [POWER] is press

to turn off in the DVD mode, this mode shuts

down first and then the unit is turned off.

•

SKIP

ZOOM

MUTE

“

” may appear at the top-right on the TV

PLAY

STOP

REV

FWD

screen during operation, warning that a pro-

hibited operation has been encountered by the

DVD or the disc.

With DVDs that use titles for playback pro-

gram signals, playback may start from the

second title or it may skip these titles.

During the playback of a two layered disc,

pictures may stop for a moment. This happens

when the 1st layer switches to the 2nd layer.

This is not a malfunction.

DISC

PAUSE SLOW

DISPLAY

•

ENTER

SETUP

TITLE

RETURN

Shaded buttons are used for following operation.

•

BASIC PLAYBACK

GETTING STARTED

MP3 PLAYBACK

1 In stop mode, press [DISC MENU], then press

[K] or [L] to select the desired group or track.

Turn on the power of amplifier and any other compo-

nents, if necessary.

DISC

folder name 1

folder name 2

folder name 3

folder name 4

file name 1

file name 2

file name 3

1 Press [POWER] then the power will turn on.

POWER

folder name 1

2 Open the disc door manually.

If a group is selected, press [B] or [ENTER] to go

•

on to the track selection screen. Press [s] to go

back to previous screen.(except for the top page.)

If a track is selected, press [ENTER] to start

•

playing tracks. Starting from the one you’ve just

chosen the subsequent tracks will be played.

Insert a disc with the label facing back of the unit to

start playing it. By simply placing the disc gently into

the slot, it will be loaded automatically.

If the entire file list cannot be displayed at once

on a screen, “n” appears to go to the next page.

Press [TITLE] to return to the top file of the

highest hierarchy in the program and file list.

•

2 Press [STOP C] to stop playback.

STOP

NOTE

Playback will start from the first chapter/track of the disc.

If the playback does not start automatically,

press [PLAY O].

When you playback a DVD which features a

title menu, it may appear on the screen. In this

case, refer to “TITLE MENU” on page 20.

Folders are known as Groups; files are known as Tracks.

•

MP3 files are accompanied by

Maximum of 255 folders can

be recognized.

icon.

•

Maximum of 999 files can be recognized.

Up to 8 hierarchies can be created.

•

This unit recommends the use of files recorded

at the below specifications:

4 Press [STOP C] to stop playback.

Sampling frequency: 44.1kHz or 48kHz

•

STOP

Constant bit rate: 32kbps ~ 320kbps

•

For MP3 file recorded in Variable Bit Rate (VBR),

•

Press [EJECT A] to remove the disc from the unit.

the unit may not display the actual elapsed time.

EJECT

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DISC MENU

RESUME

1 Press [DISC MENU].

1 During playback, press [STOP C].

DISC

Resume ON

The DVD main menu will appear.

If the feature is not available,

appear on the TV screen.

•

STOP

Press ’PLAY’ to play from here.

To play the beginning,

press ’STOP’ first and then ’PLAY’.

symbol may

If disc menu is available on the disc, audio lan-

guage, subtitle options, chapters for the title and

other options will appear for selection.

•

(Example: DVD or Audio CD)

Resume message will appear on the TV screen.

2 Press [K], [L], [s] or [B] to select an item

•

and press [ENTER] to confirm selection.

2 Press [PLAY O], playback will resume from

the point at which playback was stopped.

ENTER

PLAY

To cancel resume, press [STOP C] twice.

•

For MP3, playback will resume from the begin-

•

TITLE MENU

ning of the current track.

The resume information stays on even when the

power is turned off.

•

1 Press [TITLE].

PAUSE

TITLE

The title menu will appear.

If the feature is not available,

appear on the TV screen.

•

symbol may

•

1 During playback, press [PAUSE F].

PAUSE

2 Press [K], [L], [s] or [B] to select an item

then press [ENTER] to confirm selection.

Playback will pause and sound will be muted.

•

ENTER

2 To continue playback, press [PLAY O].

PLAY

CALLING UP A MENU SCREEN

DURING PLAYBACK

STEP BY STEP PLAYBACK

Press [DISC MENU] to call up the DVD menu or

press [TITLE] to call up the title menu.

NOTE

1 During playback, press [PAUSE F].

Contents of menu and corresponding menu

operations may vary between discs. Refer to

the manual accompanying the disc for details.

•

PAUSE

Playback will pause and sound will be muted.

•

2 The disc goes forward by one frame each

time [PAUSE F] is pressed.

PAUSE

To exit step by step playback, press [PLAY O].

PLAY

–

Download from Www.Somanuals.com. All Manuals Search And Download.

FAST FORWARD /

FAST REVERSE

ZOOM

The Zoom function allows you to enlarge the video

image and to pan through the enlarged image.

1 During playback, press [FWD g] or

[REV h].

1 Press [ZOOM] during playback.

REV

FWD

ZOOM

SLOW

Playback will continue.

•

“ g 1” or “h 1” appears on the screen.

•

2 Press [ZOOM] repeatedly to select the

required zoom factor: ZOOM1, ZOOM2,

ZOOM3 or OFF.

2 To select another speed, repeat step 1 until

your required speed number appears on the

screen.

ZOOM

For DVDs, fast forward/reverse search speed is

•

different depending on the disc. Approximate

speed is 1(×2), 2(×8), 3(×20), 4(×50) and

5(×100).

3 Press [K], [L], [s] or [B] to move the

zoomed picture across the screen.

For Audio CDs and MP3 approximate speed is

1(×2), 2(×8) and 3(×30).

•

To return to normal playback, press [PLAY O].

PLAY

4 To exit zoom mode, press [ZOOM] to OFF.

ZOOM

SLOW FORWARD /

SLOW REVERSE

NOTE

Zooming function does not work while disc

menu is shown.

•

Zooming function is not available on some

discs.

It may take several seconds to slide the

zoomed picture.

•

1 During playback, press [PAUSE F].

PAUSE

•

The picture may be distorted if you operate

other functions repeatedly (ex. [PAUSE F] or

[REV h], etc.) in the zoom mode.

•

2 Press [FWD g] or [REV h].

REV

FWD

SLOW

“

1” or “

1” appears on the screen.

•

3 To select another speed, repeat step 2 until

your required speed number appears on the

screen.

Slow forward or reverse speed varies with the

disc. Approximate speed is 1(1/16), 2(1/8) and

3(1/2).

•

To return to normal playback, press [PLAY O].

PLAY

–

Download from Www.Somanuals.com. All Manuals Search And Download.

SEARCH FUNCTION

2 Within 30 seconds, select the desired track

CH.

number using the Number buttons.

SLEEP

+100

VOL.

+10

SKIP

ZOOM

MUTE

To select single-digit track number, press [0]

first if the total number of track in the disc is 10

or more. (e.g. Press [0] [3] for track number 3.)

Playback will start at the selected track.

•

PLAY

STOP

REV

FWD

DISC

PAUSE SLOW

DISPLAY

Using [SKIP H / G

]

During playback, press [SKIP G] to move the next

track. Press it repeatedly to skip subsequent tracks.

Press [SKIP H] to go back to beginning of the cur-

rent track. Press it repeatedly to go to the previous

tracks.

ENTER

SETUP

TITLE

RETURN

CLEAR SEARCH MODE REPEAT

A-B

If [SKIP H / G] is pressed while the play-

back is paused, the playback will be paused

again after skipping to the next track.

•

Shaded buttons are used for following operation.

•

NOTE

TRACK SEARCH

[SKIP H / G] are not operative when

playback is stopped.

•

There are three ways to begin playback on an Audio

CD and MP3 at a specific track.

TITLE / CHAPTER SEARCH

Using the number buttons

1 Press the Number buttons to enter the

desired track number.

1 Press [SEARCH MODE] once for the Chapter

search, twice for the Title search during play-

back.

+100

_/2

SEARCH MODE

+10

once

Playback will start at the selected track.

To select single-digit track number, press single

number. (e.g. Press [3] for track number 3.)

To select track numbers which are higher than 9,

press [+100/+10] first.

•

2 Within 30 seconds, enter the desired chapter/

title number using the Number buttons.

•

(e.g. Press [+100/+10] [2] [5] for track number

25.)

Using [SEARCH MODE]

Playback will start at the selected chapter or

title.

Press [CLEAR] to erase the incorrect input.

To select single-digit chapter/title number, press

[0] first if the total number of chapter/title in the

disc 10 or more. (e.g. Press [0] [2] for

chapter/title 2.)

•

1 Press [SEARCH MODE].

•

SEARCH MODE

The track search display appears.

•

–

Download from Www.Somanuals.com. All Manuals Search And Download.

TIME SEARCH

MARKER SETUP SCREEN

Use markers to memorize your favorite places on a disc.

1 During playback, press [SEARCH MODE]

repeatedly to display the Time Search on the

TV screen.

1 Press [SEARCH MODE] repeatedly during

playback to display the Marker screen.

_:_ _:_ _ TOTAL 1:29:00

^{SEARCH MODE}repeatedly

10 AC

SEARCH MODE

_ _

_:_ _:_ _

repeatedly

2 Within 30 seconds, enter a desired disc time

2 Press [s] or [B] to select 1, 2, 3, 4, 5, 6, 7,

using the Number buttons.

8, 9, or 10 and ensure that “

”

- - - - - - - -

appears in the display.

3 When you reach the desired point, press

Playback will start at the specified time.

Press [CLEAR] to erase the incorrect input.

When there is no need to enter a number, “0”

appears automatically. For example,

•

[ENTER].

ENTER

“ 0 : 0

” appears in the Time Search display

- - -

The Title or Track and elapsed playing time will

appear in the TV screen.

•

if the total time of the track or title is less than

10 minutes.

4 To return to the Marker later, press [SEARCH

MODE] repeatedly during playback to display

the Marker screen. Then press [s] or [B] to

choose the desired marker, then press

[ENTER].

SEARCH MODE

ENTER

repeatedly

NOTE

Operations which erase all Markers:

– Turning off the power.

– Ejecting a disc.

•

– Pressing [SELECT].

–

Selecting “AC” at step 2 and pressing [ENTER].

To clear a marker:

•

– Press [s] or [B] to select a cursor on to

the marker number and press [CLEAR].

You can mark up to 10 points.

5 Press [SEARCH MODE] or [RETURN] to

exit.

SEARCH MODE

–

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIAL PLAYBACK FUNCTION

For MP3

PLAY

REV

FWD

STOP

1 Press [REPEAT] during playback.

DISC

PAUSE SLOW

DISPLAY

REPEAT

The repeat mode changes as described below

every time you press the button.

ENTER

•

SETUP

TITLE

RETURN

CLEAR SEARCH MODE REPEAT

A-B

TRACK

(current track

repeat)

GROUP

(current group

repeat)

ALL

(entire disc

repeat)

OFF

(repeat off)

AUDIO SUBTITLE ANGLE

MODE

Shaded buttons are used for following operation.

•

NOTE

Repeat setting will be cleared when moving

to other track.

•

REPEAT

REPEAT is available only during playback.

A-B REPEAT

For DVD-Vs

1 To activate the repeat function, press

[REPEAT] during playback.

1 Press [A-B] at your chosen starting point.

REPEAT

A-B

The repeat mode changes as described below

every time you press the button.

•

“

A-” appears briefly on the TV screen.

•

2 Press [A-B] again at your chosen end point.

CHAPTER

(current chapter repeat) (current title repeat)

TITLE

OFF

(repeat off)

A-B

“

A-B” appears briefly on the TV screen, and

•

the repeat sequence begins.

NOTE

Repeat Title/Chapter is not available with

some scenes.

The REPEAT setting will be cleared when

moving to other title or chapter.

•

3 To exit the sequence, press [A-B].

A-B

NOTE

The A-B repeat section can only be set within

the current title (for DVDs) or current track

(for Audio CDs).

A-B repeat is not available with some scenes in DVD.

To cancel the A point which was set, press

[CLEAR].

•

For CDs

1 To activate the repeat function, press

[REPEAT] during playback.

REPEAT

•

A-B repeat playback does not function during

title, chapter, track or all repeat playback.

•

The repeat mode changes as described below

every time you press the button.

•

TRACK

(current track repeat)

ALL

OFF

(repeat off)

(entire disc repeat)

NOTE

Repeat setting will be cleared when moving

to other track.

Repeat playback does not function during A-

B repeat playback.

•

–

Download from Www.Somanuals.com. All Manuals Search And Download.

PROGRAM

RANDOM PLAYBACK

You may determine the order in which tracks will play. This function shuffles the playing order of tracks

instead of playback in the sequence.

1 In stop mode, press [MODE].

1 In stop mode, press [MODE] twice.

MODE

RANDOM

CD-DA

TOTAL 0:45:55

The “PROGRAM” screen will appear.

•

MODE

RANDOM PROGRAM

no indication

twice

2 Press [▲ ] or [▼] to select a track, then press

PLAY

[ENTER].

“RANDOM” screen appears.

•

TOTAL 1:03:30

3:30

5:10

10 4:20

11 3:00

12 3:20

17 4:10

22 2:50

2/3

2 Press [PLAY O] to start random playback.

ENTER

1/4

PLAY

NOTE

Press [CLEAR] to erase the most recently

entered track.

If the entire Program cannot be displayed at

once on a screen, “G” appears to go to the next

page and “H” appears to go back to the previ-

ous page.

•

If you like to repeat the current track in the ran-

dom selection, press [REPEAT] several times

until “

you like to repeat the entire random selection

press [REPEAT] several times until “

appears during playback.

•

TRACK” appears during playback. If

ALL”

While an MP3 folder is open:

Press [ B] when you want to go to the next

•

hierarchy.

Press [s ] when you want to go back to the

previous hierarchy.

•

3 Repeat step 2 until you have selected all the

tracks you want to play in the program.

Press [PLAY O] to play the programmed tracks.

PLAY

NOTE

While the program is being played back,

pressing [STOP C] works as follows.

Press [STOP C] once and then [PLAY O]

again, playback will restart from the point where

[STOP C] was pressed (MP3: from the begin-

ning of the current track). (Program continued)

•

Press [STOP C] twice and then [PLAY O]

again, playback will restart from the track in

the usual way. (Program canceled)

•

Up to 99 tracks can be entered.

To erase all tracks in the program at once, select

“ALL CLEAR” at the bottom of the list at step 2.

If you like to repeat the current track in the

•

program, press [REPEAT] several times until

“

TRACK” appears during playback. If you

like to repeat the entire program press

[REPEAT] several times until “

appears during playback.

ALL”

–

Download from Www.Somanuals.com. All Manuals Search And Download.

CHANGING THE SETTINGS

DISPLAY

ENTER

AUDIO LANGUAGE

SETUP

TITLE

RETURN

CLEAR SEARCH MODE REPEAT

A-B

AUDIO SUBTITLE ANGLE

The unit allows you to select a language during DVD

disc (if multi languages are available) playback.

MODE

Shaded buttons are used for following operation.

•

1 Press [AUDIO] during playback.

1.ENG Dolby D 3/2.1ch 48k/3

SUBTITLE LANGUAGE

AUDIO

2 Press [AUDIO] repeatedly to select your

The unit allows you to select a language for subtitles

during DVD disc (if available) playback.

desired language.

AUDIO

NOTE

1 Press [SUBTITLE] during playback.

Pressing [AUDIO] may not work on some

•

1.ENG/6

DVDs with multiple audio languages (e.g.

DVDs which allow audio language setting on

the disc menu).

SUBTITLE

The subtitle language will appear on the display

bar at the top of the TV screen.

•

2 Press [SUBTITLE] repeatedly to select your

desired subtitle language.

STEREO SOUND MODE

SUBTITLE

3 To turn off subtitles, press [SUBTITLE]

repeatedly until “OFF” appears.

SUBTITLE

Press [AUDIO] repeatedly during playback to

select between “STEREO”, “L-ch” or “R-ch”.

STEREO

AUDIO

NOTE

Pressing [SUBTITLE] may not work on

•

STEREO - both right and left channels are

active (stereo)

L-ch - only left channel is active

R-ch - only right channel is active

•

some DVDs with multiple subtitle languages.

In this case, set it on the disc menu.

(Operation varies between discs Refer to the

manual of the disc.)

If the desired language is not shown after

pressing [SUBTITLE] several times, the disc

does not have subtitles in that language.

•

When “NOT AVAILABLE” appears on the TV

screen, it means no subtitle is recorded on the

scene.

•

NOT AVAILABLE

If you choose a language that has a 3 letter

•

language code, the code will be displayed

every time you change the Subtitle language

setting. If you choose any other languages,

“---” will be displayed instead. (Refer to page

29.)

–

Download from Www.Somanuals.com. All Manuals Search And Download.

CAMERA ANGLE

VIRTUAL SURROUND

Some DVD discs contain scenes which have been shot You can enjoy surround-sound effect over two speak-

simultaneously from various angles. You can change ers on this unit.

the camera angle when the “

screen.

” icon appears on the

1 Press [MODE] repeatedly during playback

then press [ENTER] to set it “1”, “2” or “OFF”.

1 Press [ANGLE] during playback.

OFF

MODE

ENTER

repeatedly

1 / 8

ANGLE

1: Natural effect

The selected angle will be displayed on the dis-

play bar at the top of the screen.

•

2: Emphasized effect

OFF: Original Sound

If the “ANGLE ICON” setting is “OFF” in the

•

2 Press [MODE] to exit.

“OTHERS” menu, the “

” icon will not

MODE

appear. (Refer to page 31.)

2 Press [ANGLE] repeatedly to select your

You can also exit the menu by pressing

[RETURN].

•

desired angle.

ANGLE

NOTE

For CD play only:

Virtual Surround will not be effective if the

•

sound mode is set to something other than

STEREO. (Refer to “STEREO SOUND

MODE” on pge 26.)

BLACK LEVEL SETTING

Adjust the Black Level Settings to make the black

parts of the picture brighter.

1 Press [MODE] during playback then press

[ENTER] to switch “ON” or “OFF”.

OFF

MODE

ON: Makes the dark parts brighter.

OFF: Shows the original picture as recorded.

(Initial setting)

2 Press [MODE] twice or [RETURN] to exit.

^MODEtwice OR

RETURN

NOTE

The setting will be saved even if the unit is

turned off.

•

–

Download from Www.Somanuals.com. All Manuals Search And Download.

THE ON-SCREEN INFORMATION

DISPLAY

2 Press [DISPLAY] again to show current Total

ENTER

Track.

SETUP

TITLE

RETURN

ALL:

Current track number / Total tracks

4/12 0:13:45 - 0:45:40

Shaded buttons are used for following operation.

•

Current repeat setting appears only

when the repeat setting is active

T: Track repeat

A: All Tracks repeat

You can check the information about the current disc

B: A-B repeat

by pressing [DISPLAY].

Remaining time of the entire disc

Elapsed time of the entire disc

For DVD-Vs

3 Press [DISPLAY] again to exit.

1 Press [DISPLAY] during playback to show

current Chapter.

Angle icon, appears only when avail-

able on the DVD

NOTE

Current playback status

11/16 0:00:00 - 0:03:30

When you are playing a disc in PROGRAM

or RANDOM mode, “ PROGRAM” (or

RANDOM) will be displayed at step 2.

•

Remaining time of the current chapter

Elapsed time of the current chapter

CH(Chapter):

Current chapter number / Total chapters

Press [DISPLAY] again to show current Title.

For MP3

1/3 0:00:00 - 1:23:45

1 Press [DISPLAY] during playback.

Remaining time of the current title

Current playback status

Elapsed time of the current title

TRACK 01

TT(Title):

Current title number / Total titles

The name of the file currently in play

will be displayed.

3 Press [DISPLAY] again.

2 Press [DISPLAY] again.

TR(Track):

Layer numbers, appears only when

playing a two-layered Disc

L0: Layer 0 is playing

Current track number / Total tracks

1/36 0:01:15

Current repeat setting, if active

T: Track repeat

L1: Layer 1 is playing

G: Group (folder) repeat

A: Disc repeat

Current repeat setting appears only

when the repeat setting is active

C: Chapter repeat / T: Title repeat /

Elapsed playing time of the current

track

B: A-B repeat

BIT RATE: The amount of audio and

video data currently being read

3 Press [DISPLAY] again to show the current-

playback mode.

4 Press [DISPLAY] again to exit.

(Only when you are playing a disc in PROGRAM or

RANDOM mode.)

PROGRAM

RANDOM

4 Press [DISPLAY] again to exit.

For Audio CDs

1 Press [DISPLAY] during playback to show the

current Track.

Current playback status

4/12 0:03:21 - 0:02:15

Remaining time of the current track

Elapsed time of the current track

TR(Track):

Current track number / Total tracks

–

Download from Www.Somanuals.com. All Manuals Search And Download.

CHANGING THE DVD SET UP ITEMS

LANGUAGE SETTING

DISPLAY

ENTER

Follow steps to in the

CUSTOM MENU

SETUP

TITLE

RETURN

3 Press [K] or [L] to select the desired item

Shaded buttons are used for following operation.

•

then press [ENTER].

SETUP

LANGUAGE

CUSTOM MENU

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

ENTER

You can change the DVD player’s settings.

AUDIO: Sets the audio language.

SUBTITLE: Sets the subtitle language

DISC MENU: Sets the language for DVD menu.

1 In stop mode, press [SETUP] twice, [L] to

select “CUSTOM” then press [ENTER].

SETUP

4 Press [K] or [L] to select a setting then press

twice

[ENTER].

SETUP

AUDIO

ORIGINAL

ENGLISH

FRENCH

LANGUAGE

QUICK

CUSTOM

INITIALIZE

ENTER

NOTE

SETUP

SUBTITLE

OFF

ENGLISH

FRENCH

If the menu does not appear, press [PLAY O]

first, then press [STOP C]. Make sure the

disc is in stop mode, then slowly press

[SETUP] twice.

•

SETUP

DISC MENU

ENGLISH

FRENCH

SPANISH

2 Press [K] or [L] to select the desired item

then press [ENTER] to confirm.

If “OTHER” is selected on the “AUDIO”, “SUB-

TITLE” or “DISC MENU” screen, press four-

digit number to enter the code for the desired

language.

•

SETUP

CUSTOM

LANGUAGE

DISPLAY

AUDIO

ENTER

PARENTAL

OTHERS

Only the languages supported by the disc can be

selected.

Refer to the pages below to set up each item.

5 Press [SETUP] to exit the menu.

LANGUAGE: See

LANGUAGE SETTING

DISPLAY SETTING

AUDIO SETTINGS

SETUP

DISPLAY:

See

AUDIO:

PARENTAL: See

OTHERS: See

PARENTAL CONTROL

OTHER SETTINGS

NOTE

Language Setting for Audio and Subtitle are

•

not valid for some discs due to default setting

of the disc. In this case, set them by pressing

[AUDIO] and [SUBTITLE]. (Refer to page

26.)

If you select a language that is not supported

•

by the disc, subtitle will automatically be set

OFF and the first item of the audio languages

will be automatically set.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DISPLAY SETTING

AUDIO SETTINGS

Choose the appropriate Audio settings for your equip-

ment as it only affects during the playback of DVD

discs.

Follow steps to in the on

CUSTOM MENU

page 29.

3 Press [K] or [L] to select the below items then

Follow steps to in the on

CUSTOM MENU

press [ENTER].

page 29.

SETUP

DISPLAY

3 Press [K] or [L] to select the below items then

TV MODE

STILL MODE

4:3 LETTER BOX

AUTO

ENTER

press [ENTER].

SETUP

AUDIO

DRC

DOWN SAMPLING

DOLBY DIGITAL

BITSTREAM

ENTER

TV MODE:

QUICK

You can change certain aspects of the DVD display

screens and on-screen messages on the TV screen.

DRC (Dynamic Range Control):

SETUP

AUDIO

SETUP

DISPLAY

DRC

DOWN SAMPLING

DOLBY DIGITAL

BITSTREAM

TV MODE

STILL MODE

4:3 LETTER BOX

AUTO

To compress the range of soft to loud sound.

The default setting is “ON”.

•

4:3 LETTER BOX (default): To show black bars

on top and bottom of the screen.

•

4:3 PAN & SCAN: To show a full height picture

with both sides trimmed.

DOWN SAMPLING:

SETUP

AUDIO

DRC

DOWN SAMPLING

DOLBY DIGITAL

BITSTREAM

STILL MODE

This function allows you to adjust picture resolu-

tion and quality in the still mode.

ON : Output in 48 kHz. (default)

OFF : Output the original sound.

When playing disc with copyright Protection

If you select “OFF”, copyright protection will be

activated and sound will be down sampled at

48kHz.

•

SETUP

DISPLAY

•

TV MODE

STILL MODE

4:3 LETTER BOX

AUTO

•

AUTO (default): Automatically select the best

resolution setting (FRAME or FIELD) based on

the data characteristics of the pictures.

FIELD: Select “FIELD” when the pictures are

still unstable even if “AUTO” is selected.

FIELD stabilizes the pictures, although the pic-

ture quality may become coarse due to the limit-

ed amount of data.

FRAME: Select “FRAME” to display relatively

motionless pictures in higher resolution.

FRAME improves the picture quality, although it

may unstabilizethe pictures due to simultaneous

output of two field data.

•

DOLBY DIGITAL:

Set to “BITSTREAM” when the unit is connected

QUICK

to a Dolby Digital Decoder.

SETUP

AUDIO

DRC

DOWN SAMPLING

DOLBY DIGITAL

BITSTREAM

•

BITSTREAM: Output a Dolby Digital signal

(default)

PCM: Convert the Dolby Digital to PCM

(2 channel stereo)

•

4 Press [SETUP] to exit the menu.

SETUP

4 Press [SETUP] to exit the menu.

SETUP

QUICK MENU

You can select the “TV MODE” or “DOLBY DIGITAL” from the QUICK menu quickly. To access the

•

QUICK menu, select “QUICK” instead of “CUSTOM” at step on page 29.

TV SET UP MENU IN DVD MODE

You can access the TV SETUP menu by pressing [SETUP] from the DVD mode, and select only

“LANGUAGE” and “BACK LIGHT”.

•

–

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTROL LEVELS

PARENTAL CONTROL

ALL

•

Parental Control limits the disc viewing that exceed

your setting (with a password or playback will stop).

This feature allows you to prevent discs with alterna-

tive scenes from being played by your children.

All parental lock is cancelled.

Level 8

•

DVD software of any grade (adult/general/children)

can be played back.

Levels 7 to 2

Only DVD software intended for general use and

children can be played back.

•

PARENTAL LEVEL

Parental Level allows you to set the rating level of

your DVD discs. Playback will stop if the disc’s rat-

ings exceed the level you set.

Level 1

•

Only DVD software intended for children can be

played back, with those intended for adult and gen-

eral use prohibited.

Follow steps to in the

CUSTOM MENU

page 29.

3 Enter your four-digit password then press

OTHER SETTINGS

[ENTER].

Follow steps to in the on

CUSTOM MENU

SETUP

PARENTAL

PASSWORD

Enter current password.

page 29.

ENTER

3 Press [K] or [L] to select the below items then

press [ENTER].

Press [4], [7], [3], [7] then enter your password

if you forget the password.

•

SETUP

OTHERS

ANGLE ICON

SCREEN SAVER

OFF

ENTER

4 Press [K] or [L] to select “PARENTAL LEVEL”

then press [ENTER].

ANGLE ICON:

SETUP

PARENTAL

Press [ENTER] repeatedly to turn Angle icon

“ON” or “OFF”.

•

PARENTAL LEVEL

PASSWORD CHANGE

ALL

ENTER

The default setting is “ON”.

SCREEN SAVER:

•

5 Press [K] or [L] to select the desired level

Press [ENTER] repeatedly to turn Screen Saver

“ON” or “OFF”.

•

then press [ENTER].

SETUP

PARENTAL

The default setting is “OFF”. If you select “ON”,

the screen saver program starts when there is no

input from the unit for 5 minutes in stop mode.

•

PARENTAL LEVEL

ALL

ENTER

7 [NC-17]

6 [R]

4 Press [SETUP] to exit the menu.

6 Press [SETUP] to exit the menu.

SETUP

NOTE

When doing this for the first time, enter any 4

digits. (except for 4737) That number will be

used as the password. (in the event you forget

the password, see below)

To change the password, press [K] or [L] to

select “PASSWORD CHANGE” at step 4

then press [ENTER]. Enter the four-digit

password, then press [ENTER].

With some DVDs, it may be difficult to find

if they are compatible with parental lock. Be

sure to check if the parental lock function

operates in the way that you have set.

Record the password in case you forget it.

•

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DISPLAY

SETUP

ENTER

TITLE

RETURN

Shaded buttons are used for following operation.

•

INITIALIZE

This allows you to return all selections of SETUP

(except for “PARENTAL” and menu language) to

their default settings.

1 Press [SETUP] twice in stop mode so that the

“INITIALIZE” menu appears.

SETUP

2 Press [K] or [L] to select “INITIALIZE” then

press [ENTER].

SETUP

QUICK

CUSTOM

ENTER

INITIALIZE

3 Press [K] or [L] to select “YES” then press

[ENTER] twice.

SETUP

INITIALIZE

Initialize?

YES

ENTER

twice

All the settings (except for “PARENTAL” and

menu language) will be cleared.

To cancel the initialization, select “NO”.

•

4 Press [SETUP] to exit the menu.

SETUP

–

Download from Www.Somanuals.com. All Manuals Search And Download.

TROUBLESHOOTING GUIDE

If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the unit, con-

sulting the following checklist.

PROBLEM

CORRECTIVE ACTION

Make sure the power plug is connected to an AC outlet.

Make sure the power is turned on.

Check if the power plug is connected to an AC outlet.

Check the batteries in the remote control.

Aim the remote control directly at the remote sensor. If necessary,

remove all the obstacles between the sensor and the remote control.

You have to be within 23 feet of the unit.

No power

•

No operation by infrared remote

control

•

Check if the correct mode is selected. If not switch the mode by

pressing [SELECT], whichever you need.

TV Mode

Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked

possibilities. Before arranging for service, check these items. It could save your time and money.

PROBLEM

No picture or sound

CORRECTIVE ACTION

Make sure the AC cord is connected to an AC outlet.

Check antenna connection.

Press [SELECT] to select TV mode.

Then try other TV feature.

•

Let the unit program its tuner memory.

Adjust direction or replace antenna.

Adjust picture controls.

Check for broken pin of the antenna cable.

Adjust volume control on remote control or main unit.

Press [MUTE] to restore sound.

•

No picture or poor picture on the

unit

No sound or poor sound

Bars On Screen

If outside antenna is being used, check for broken wire.

Check for local interference.

Picture Distorted or Blurred

Try a new channel, if OK, then possible station trouble.

If outside antenna is being used, check for broken wire.

Try a new channel, if OK, then possible station trouble.

If outside antenna is being used, check for broken wire.

Check for local interference.

Try a new channel, if OK, then possible station trouble.

Is antenna connected to jack on the back of the set?

If outside antenna is being used, check for broken wire.

Adjust “COLOR” control.

Try a new channel, if OK, then possible station trouble.

Is antenna connected to jack on the back of the set?

If outside antenna is being used, check for broken wire.

Check for local interference.

Try a new channel, if OK, then possible station trouble.

Is antenna connected to jack on the back of the set?

If outside antenna is being used, check for broken wire.

Adjust “CONTRAST” & “BRIGHT” control.

Picture Rolls Vertically

Lines or Streaks in Picture

No Color

Poor Reception on Some Channels

Ghosts in Picture

Weak Picture

–

Download from Www.Somanuals.com. All Manuals Search And Download.

PROBLEM

Sound OK, Picture Poor

CORRECTIVE ACTION

Try a new channel, if OK, then possible station trouble.

Is antenna connected to jack on the back of the set?

If outside antenna is being used, check for broken wire.

Check for local interference.

Adjust “CONTRAST” & “BRIGHT” control.

Try a new channel, if OK, then possible station trouble.

Check for local interference.

•

Picture OK, Sound Poor

•

No operation by infrared Remote

Control

Different color marks on screen

Make sure the AC cord is connected to an AC outlet.

Check batteries in remote control.

•

Magnetism from nearby appliances and geomagnetism might affect

the color of the TV picture. Move the unit away from the appliances,

the unit can repair itself automatically. If you want to repair immedi-

ately, unplug the power cord, then plug it in again 30 minutes later or

so. This automatically resets the unit.

•

CLOSED CAPTION PROBLEM

POSSIBLE REMEDY

Misspelling in captions

• Error committed by the closed captioning production company.

• Possible in a live broadcast. Not in case of a prerecorded program.

• A few seconds of delay is common for live broadcast.

• Display capacity may not exceed 220 words per minute. If a dialogue

• exceeds that rate, selective editing is used to insure that the captions

• remain up-to-date with the current TV screen dialogue.

Text is not shown in its entirety or

a delay occurs from what is being

said.

Captions scrambled with white

boxes

• Caused by interferences of building, power lines, thunderstorms, etc.

No captions in a program which

must contain closed caption

• The broadcast may use a time compression process to speed up the

• program. The decoder cannot read the compressed information and

• captions will be lost.

Black box in the TV screen

• You are in TEXT mode. Select a CAPTION mode (“C1”, “C2”) or

• Caption “OFF”.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Mode

PROBLEM

CORRECTIVE ACTION

• Insert a correct video disc that plays on this unit.

• Press [SELECT] to select DVD mode, then try other DVD feature.

• Insert the disc.

No picture

Disc cannot be played

• Clean the disc.

• Place the disc correctly, with the label side up.

• Cancel the parental lock or change the control level.

• Connect the audio cables firmly.

No sound

• Turn the power of the audio component on.

• Correct the audio output settings.

• Correct the input settings on the audio component.

• This unit does not support DTS audio. This is not a malfunction.

• There are some cases where pictures may be slightly distorted, which

are not a sign of a malfunction.

No DTS audio is output

Distorted picture

• Although pictures may stop for a moment, this is not a malfunction.

• The selected language is not available for audio or subtitles on the

DVD. (This is not a malfunction.)

Audio or subtitle language

does not match the set up

The camera angle cannot be changed • The DVD does not contain sequences recorded from different camera

angles. (This is not a malfunction.)

Audio or subtitle language cannot be • The DVD does not contain audio source or subtitles in the selected

changed

language. (This is not a malfunction.)

“Prohibited icon” appears on the

screen, prohibiting an operation

CD sound dropout

• That operation is prohibited by the unit or the disc.

(This is not a malfunction.)

• Scratched disc. Replace the disc with an unscratched one.

No CD reproduction

DVD picture dropout

DVD picture freeze

DVD picture in mosaic

No DVD reproduction

Disc cannot be inserted

Disc cannot be taken out

• Check if any disc is already in.

• Unplug and plug again the power cord to the outlet, and then press

[EJECT A] on the remote control.

• Press and hold [A EJECT] on the unit for more than 5 secounds.

NOTE

Some functions are not available in specific modes, but this is not a malfunction. Read the description in

this Owner’s Manual for details on correct operations.

•

Playback from a desired track and random playback are not available during program playback.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

MAINTENANCE

CABINET CLEANING

DISC HANDLING

Wipe the front panel and other exterior surfaces of

the unit with a soft cloth immersed in lukewarm

water and wrung dry.

•

Handle the discs so that fingerprints and dust do

not adhere to the surfaces of the discs.

•

Never use a solvent or alcohol. Do not spray insec-

•

ticide liquid near the unit. Such chemicals may

cause damage and discoloration to the exposed sur-

faces.

SERVICING

Always store the disc in its protective case when it

is not used.

Should your unit become inoperative, do not try to

•

correct the problem by yourself. There are no user-

serviceable parts inside. Turn off, unplug the power

cord and please call our help line mentioned on

the front page, to locate an Authorized Service

Center.

IF THE LASER OPTICAL PICKUP UNIT

IS DIRTY

To clean-off, use a soft cloth.

•

If the unit still does not perform properly when it is

Do not use a hard cloth since this will mar the disc.

Wipe the disc in a straight line from center to edge.

Never wipe with a circular motion.

•

operated, while referring to the relevant sections

and to “TROUBLESHOOTING GUIDE” in this

Owner’s Manual, the laser optical pickup unit may

be dirty. Consult your dealer or an Authorized

Service Center for inspection and cleaning of the

laser optical pickup unit.

Do not use detergent or abrasive cleaning agents.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

GENERAL SPECIFICATIONS

ELECTRICAL SPECIFICATIONS

Sound output:

2 speakers, 1W, 8 ohm

LCD :

Television system :

Closed caption system :§15.119/FCC

Channel coverage:

15 inch

NTSC-M

OTHER SPECIFICATIONS

Terminals

Antenna input:

VHF/UHF/CATV

75 ohm unbalanced (F-type)

Mini DIN 4-pin jack

RCA connector [ 1

VHF:

UHF:

CATV:

2 ~ 13

14 ~ 69

S-Video input:

Video input:

Audio L/R input:

2 ~13, A ~ W,

W+1 ~ W+84,

A-5 ~ A-1, 5A

181 channel

frequency synthesized

tuning system

Direct access keyboard,

programmable

scan and up/down

RCA connector [ 4

Component video input:

One pin jack (Y), 1Vpp (75 ohm)

Two pin jacks (Pr)/(Pb), 700mVpp (75 ohm)

Coaxial digital audio output:

Tuning System:

Channel access:

One pin jack, 500mmVpp (75 ohm)

Headphone:

Remote control:

1/8" stereo (3,5mm)

Digital encoded

infrared light system

Operating

temperature:

5°C to 40°C

DVD

(41°F~104°F)

Product type:

Discs:

DVD Player

DVD video, Audio CD

CD with MP3 files

Power requirements: AC 120V, 60Hz

Power consumption

(Maximum):

LCD:

47W

15"

Dimensions:

H:15-13/16" (402mm)

W:15-3/16" (385mm)

D:8-7/16" (215mm)

9.7 lbs. (4.4kg)

Weight:

Designs and specifications are subject to change without notice.

If there is a discrepancy between languages, the default language will be English.

•

–

Download from Www.Somanuals.com. All Manuals Search And Download.

INDICE

■ INDICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

■ CONTROLES DE OPERACIÓN Y FUNCIONES . . . . . 38

PARA INSERTAR LAS PILAS . . . . . . . . . . . . . . . . . . . . 39

■ PREPARACIÓN PARA LA UTILIZACIÓN . . . . . . . . . . 40

CONEXIONES DE ANTENA/CABLE . . . . . . . . . . . . . . 40

CONEXIÓN EXTERNA . . . . . . . . . . . . . . . . . . . . . . . . . 41

SECCIÓN DE DVD

■ REPRODUCCIÓN DE UN DISCO . . . . . . . . . . . . . . . . 44

REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . . . . . . 44

MENÚ DE DISCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

REANUDACIÓN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

SECCIÓN DE TV

■ OPERACIÓN DE TV Y AJUSTES. . . . . . . . . . . . . . . . . 42

PARA MIRAR UN PROGRAMA DE TV . . . . . . . . . . . . 42

AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

IDIOMA DE MENÚ . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

CONTROLES DE OPERACIÓN Y FUNCIONES

NOTE

Para elegir el modo de DVD presione primero [SELECT], [PLAY O] o [EJECT A], o introduzca un

disco en la ranura. De otra manera, el DVD no funcionará.

•

- MANDO A DISTANCIA

• Para saber cómo funciona el mando a distancia, consulte la [Fig.1] de la página 8.

1.Botón POWER

11. Botón CLEAR

Presione para encender y apagar la unidad.

Presione para cancelar o borrar un ajuste intro-

ducido actualmente.

2.Botón PICTURE

Presione para ajustar la imagen.

3.Botones numéricos

Presione para seleccionar directamente el número

de canal deseado .

Botón +100 (para modo TV)

Presione para seleccionar canales cuyo número

sea superior a 99.

Botón +10 (para modo DVD)

Presione para introducir los números superiores a

9 deseados.

Presione para borrar la pantalla “DISCO ADEN-

TRO”.

12. Botón MODE

Presione para visualizar la pantalla de la repro-

ducción programada o la de reproducción aleato-

ria en el modo de parada.

Presione para visualizar la pantalla de ajuste del

nivel del negro o la pantalla de sonido envolvente

durante la reproducción.

13. Botón SEARCH MODE

Presione para localizar un punto deseado.

4.Botón SLEEP

Presione para ajustar el temporizador de reposo

14. Botón AUDIO

Para modo TV: Presione para seleccionar el

modo de sonido de TV (ESTEREO/SAP/MONO).

Para modo DVD: Presione para seleccionar un

idioma de audio deseado (si está disponible).

5.Botones SKIP H /

Presione una vez para omitir capítulos o pistas y

desplazarse a un punto específico.

6.Botón PLAY

15. Botón EJECT

Presione para reproducir el disco.

Presione para extraer un disco de la unidad.

7.Botón PAUSE

16. Botón SELECT

Presione para hacer una pausa en la reproducción

del disco actual.

Presione para seleccionar el modo TV, modo de

entrada externa o modo de DVD.

8.Botón DISPLAY

Para modo TV

17. Botones CH. K /

Presione para seleccionar canales memorizados.

Presione para visualizar el número actual de canal en

la pantalla del televisor.

18. Botones VOL. X /

Para modo DVD

Presione para controlar el nivel de volumen del

DVD y el televisor.

Presione para visualizar el estado actual en la pan-

talla del televisor.

19. Botón MUTE

9.Botón SETUP

Presione para entrar o salir del menú de configu-

ración del TV/DVD.

Presione para silenciar el sonido. Presiónelo de

nuevo para restablecer el sonido.

20. Botón ZOOM

10. Botón TITLE

Presione para ampliar la parte de la imagen repro-

ducida en un DVD.

Presione para visualizar el menú de títulos.

- 38 -

Download from Www.Somanuals.com. All Manuals Search And Download.

26. Botón RETURN

21. Botón REV

Presione para volver a la pantalla anterior en el

menú de configuración.

Presione para ver la imagen en DVD en retroceso

o en cámara lenta de retroceso.

27. Botón A-B

Botón FWD

Presione para mover en avance rápido o en

cámara lenta en el disco.

Presione para repetir la reproducción de una sec-

ción seleccionada.

28. Botón ANGLE

22. Botón STOP

Presione para cambiar el ángulo de la cámara y

ver la secuencia que se está reproduciendo desde

un ángulo diferente (si existe).

Presione para detener la reproducción del disco.

23. Botón DISC MENU

– Muestra el menú del DVD.

29. Botón REPEAT

– Muestra la lista de archivos del disco MP3.

Repite la reproducción del disco, título, capítulo,

grupo o pista actual.

24. Botón ENTER

Presione para establecer un ajuste.

30. Botón SUBTITLE

25. Botones

(Arriba) /

(Abajo) /{

(Izquierda) /

Presione para seleccionar el idioma de los subtí-

tulos.

(Derecha)

Presione para seleccionar o ajustar los ítems del

menú.

- PANEL FRONTAL

• Para ver la ilustración del panel frontal, vaya a la página 9, [Fig. 2].

36. Botón SELECT

31. Botón STOP

Presione para seleccionar el modo TV, modo de

entrada externa o modo de DVD.

Presione para detener la reproducción del disco.

32. Ventana de sensor remoto

33. Botón MENU

37. Botón POWER

Presione para encender y apagar la unidad.

Presione para entrar o salir del menú de configu-

ración del TV/DVD.

38. Botón A EJECT

Presione para extraer un disco de la unidad.

34. Botones VOLUME X /

39. Botón PLAY

Presione para controlar el nivel de volumen del

DVD y el televisor.

Presione para reproducir el disco.

35. Botones CHANNEL K /

Presione para seleccionar canales memorizados.

PARA INSERTAR LAS PILAS

PRECAUCIONES A LA HORA DE

INSERTAR LAS PILAS

1 Abra la cubierta del compartimiento de las

pilas empujando la cubierta del mando a dis-

tancia en el sentido de la flecha.

Asegúrese de seguir la polaridad correcta, tal como

•

se indica en el compartimiento de las pilas. Si se

colocan las pilas con la polaridad invertida se

pueden ocasionar daños a la unidad.

2 Inserte 2 pilas “AA” en el compartimiento de

las pilas, en el sentido indicado por las mar-

cas de polaridad (+/-).

No mezcle distintos tipos de pilas (ej. alcalina y de

carbón-zinc) o pilas viejas con nuevas.

•

3 Vuelva a poner la cubierta.

Si no va a usarse la unidad durante un período

•

largo de tiempo, quite las pilas para prevenir daños

o lesiones ocasionadas por posibles fugas de las

pilas.

No intente recargar las pilas que no sean para

recargar; pueden sobrecalentarse y estropearse.

•

NOTA

No se recomienda el uso de mandos a distancia universales. No todas las funciones pueden controlarse

con un mando a distancia universal.

•

Si decide usar un mando a distancia universal con esta unidad, sea consciente de que el número de código

suministrado puede no adecuarse a la unidad. En este caso, llame al fabricante del mando a distancia uni-

versal.

- 39 -

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARACIÓN PARA LA UTILIZACIÓN

CONEXIONES DE ANTENA/CABLE

NOTA

Los cables utilizados aquí están disponibles en los comercios.

Para su seguridad y para evitar daños a la unidad, desconecte el cable de antena de la toma ANT.

antes de trasladar la unidad.

•

- CONEXIONES DE ANTENA/CABLE

SI TIENE UNA TOMA DE PARED

Conecte el televisor a la toma de antena de pared con

el cable RF (disponible en los comercios).

[Parte posterior de

este unidad]

(

)

SI TIENE CABLE DE HILOS

Conecte el televisor al cable de antena.

desde Compañia de Cable o

Antena de Satélite

NOTA

Cable RF

Antes de conectar la antena en la toma ANT. de la unidad,

•

compruebe que la patilla no esté torcida. Si lo está, ponga la

patilla recta tal como se muestra en la ilustración y a contin-

uación conecte la patilla a la toma ANT. de la unidad.

Patilla torcida

Cable

Conector

(Debe ponerse

recta)

(patilla recta)

- CONEXIÓN CON CAJA DE CONVERTIDOR /CAJA DE SATÉLITE

CUANDO SE USA UNA CAJA DE CON-

VERTIDOR/CAJA DE SATÉLITE

[Parte posterior de este unidad]

Si su compañía de televisión por cable le suministra

una caja de convertidor o si usa un sistema de

satélite, podrá utilizar la conexión básica que se

muestra anteriormente.

(

)

Caja de convertidor

o caja de satélite

La selección de los canales deberá hacerse con la

caja de convertidor o caja de satélite. Esto significa

que no es posible cambiar de canal utilizando el

mando a distancia de la unidad.

SALIDA

ENTRADA

Cable coaxial

de 75 ohmios

ANT

desde Compañia de Cable o

Antena de Satélite

NOTA

Para el instalador de sistemas CATV:

Esta nota tiene la finalidad de llamar la atención del instalador de sistemas CATV para que tenga en cuenta el

Artículo 820-40 de la NEC, que proporciona recomendaciones para hacer una conexión a tierra apropiada y, en par-

ticular, especifica que la tierra del cable debe conectarse al sistema de puesta a tierra del edificio, tan cerca del punto

de entrada del cable como sea posible.

•

- 40 -

Download from Www.Somanuals.com. All Manuals Search And Download.

CONEXIÓN EXTERNA

Puede conectar esta unidad a su equipo de audio/vídeo.

[Parte posterior

de este unidad]

AUDIO

Asegúrese de apagar todos los componentes del

sistema antes de conectar otro componente.

Consulte los manuales de instrucciones de los

componentes que va a conectar a la unidad.

NOTA

•

(

)

•

VIDEO2

VIDEO1

Cuando utilice las tomas de entrada externa, seleccione

“AUX1” o “AUX2” presionando [INPUT SELECT].

(Consulte la página 42.)

Para utilizar la tomas VIDEO1, seleccione

“AUX1”.

•

Para utilizar la tomas VIDEO1, seleccione

“AUX2”.

•

Use esta conexión si su propio equipo A/V (ej.

videograbadora) tiene tomas de salida de audio y

vídeo. Cuando se usa un cable Vídeo-S, se obtiene

una imagen mejor.

- ENTRADA DE VÍDEO1

ej.

Cable de audio (SALIDA)

AUDIO

(SALIDA)

Cable de vídeo

VIDEO1

VID

Videograbadora

S-VIDEO

Cable VIDEO-S (SALIDA)

NOTA

Si su propio equipo es monofónico (sólo tiene una toma de audio), conecte el cable de audio a la toma AUDIO L de esta unidad.

Si conecta la toma VIDEO y la toma S-VIDEO simultáneamente, se da prioridad a la S-VIDEO. .

•

Use esta conexión si el equipo A/V (ej. videocámara

o videojuego) tiene tomas de salida de vídeo COM-

PONENTE (Y,Pb,Pr). Podrá disfrutar de una mejor

imagen con esta conexión.

ej.

- ENTRADA DE VÍDEO2

VIDEO2

(SALIDA)

Cable de audio

AUDIO

COMPONENT

Cable de vídeo

componente

Videojuego

Podrá disfrutar de un sonido de DVD con

más presencia desconectando el equipo de

audio digital, tal como el descodificador

Dolby Digital.

- SALIDA DE AUDIO

A toma de ENTRADA

DIGITAL COAXIAL DE AUDIO

Equipo doméstico de audio

Descodificador Dolby Digital

DIGITAL

AUDIO OUT

(COAXIAL)

NOTA

La fuente de audio de un disco en un formato de sonido envolvente Dolby Digital de 5,1 canales no se

•

puede grabar como sonido digital mediante una pletina MD o DAT.

Si conecta un descodificador Dolby Digital, ajuste la función “DOLBY DIGITAL” a “BITSTREAM”

para salida de audio en el modo de configuración. (Consulte la página 30).

A menos que se haga la conexión a un decodificador “DOLBY DIGITAL” a “PCM” para salida de audio

en el modo de configuración.

La reproducción en una unidad utilizando ajustes incorrectos puede generar ruido y distorsión, y también

puede provocar daños a los altavoces. (Consulte la página 30).

Fabricado bajo licencia de Dolby Laboratories. “Dolby” y el símbolo de la doble D son marcas comerciales de

Dolby Laboratories.

- 41 -

Download from Www.Somanuals.com. All Manuals Search And Download.

SECCIÓN DE TV

OPERACIÓN DE TV Y AJUSTES

NOTA

Para seleccionar el número de canal medi-

ante los botones numéricos:

POWER PICTURE SELECT

EJECT

CH.

Para seleccionar un número de canal de un

•

solo dígito, presione primero [0] (ej. Para el

canal 2, presione [0] [2]).

Para seleccionar canales por cable cuyos números

•

sean superiores a 99, presione primero[+100/+10].

(ej. Para el canal 125, presione [+100/+10] [2] [5]).

SLEEP

+100

VOL.

+10

4 Presione [VOL. X / Y] para seleccionar el

SKIP

ZOOM

MUTE

nivel de volumen deseado.

PLAY

STOP

REV

FWD

VOL.

DISC

VOLUMEN 20

PAUSE SLOW

DISPLAY

Presione [MUTE] para silenciar el sonido al instante.

Vuelva a presionarlo para restaurar el nivel de

volumen anterior.

•

ENTER

SETUP

TITLE

RETURN

NOTA

Los botones sombreados se utilizan para las siguientes operaciones.

•

Si presiona [CH. K / L] en el modo DVD,

•

puede cambiar los canales del televisor. Incluso

si apaga la unidad en el modo DVD, cuando

vuelve a encenderlo se pondrá en el modo TV.

PARA MIRAR UN PROGRAMA DE TV

1 Conecte el cable de alimentación de

la unidad a una toma estándar CA.

PARA VER UN CANAL POR CABLE O

SATÉLITE

Si la unidad está conectada a una caja de convertidor

o caja de satélite, presione [CH. K / L] para selec-

cionar CH3 o CH4 según el ajuste de canal de salida

del aparato, y seleccione en él el canal deseado.

NOTA

Si se visualiza algún dígito en la esquina de la

•

pantalla, presione [POWER] sin desconectar

el cable de alimentación.

2 Presione [POWER] para encender la unidad.

PARA VER SEÑALES DE ENTRADA DE

UN DISPOSITIVO EXTERNO

POWER

Cuando conecte un equipo externo a las tomas de

entrada delanteras AUDIO/VIDEO, presione

[SELECT] o [CH. K / L] repetidamente hasta que

aparezca en la pantalla “AUX1” o “AUX2”.

3 Presione [CH. K / L] para seleccionar el

número de canal deseado.

CH.

NOTA

Si hay un disco dentro de la unidad, se visu-

•

alizará el mensaje “DISCO ADENTRO” en la

pantalla durante 10 segundos.

Presione los botones numéricos para intro-

ducir el número de canal deseado.

DISCO ADENTRO

+100

+10

Para borrar el mensaje al instante, presione [CLEAR].

•

- 42 -

Download from Www.Somanuals.com. All Manuals Search And Download.

AJUSTE DE CANAL

IDIOMA DE MENÚ

PROGRAMACIÓN AUTOMÁTICA DE CANAL

1 Presione [SETUP] y a continuación presione

[K] o [L] para seleccionar el “LANGUAGE”.

De acuerdo con la configuración de fábrica, esta

unidad ha memorizado todos los canales, incluidos

los que no están disponibles en su localidad. Esta

función solo pone automáticamente en memoria los

canales disponibles.

- TV SET UP -

CHANNEL SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

BACK LIGHT [BRIGHT]

ENTER

1 Presione [SETUP] y a continuación presione

2 Presione [ENTER] repetidamente para selec-

cionar “ENGLISH” = inglés, “ESPAÑOL” o

“FRANÇAIS”= francés.

[

K] o [L] para señalar “AJUSTE DE CANAL”.

- TV PREP. -

AJUSTE DE CANAL

AJUSTE DE V-CHIP

SETUP

IDIOMA

TITULO

[ESPAÑOL]

[OFF]

ENTER

LUZ DE FONDO [BRILLO]

3 Presione [SETUP] para salir del menú.

SETUP

2 Presione [ENTER] y a continuación presione

[

K] o [L] para señalar “PREA. AUTO CA.”.

– AJUSTE DE CANAL –

NOTA

AGREGAR/BORRAR CA (CATV)

Esta función selecciona sólo el idioma del

menú de pantalla; no la fuente de audio.

•

PREA. AUTO CA.

ENTER

Si por alguna razón el menú está en español o

•

en francés, presione [SETUP], luego [K] o

[L] para seleccionar “IDIOMA [ESPAÑOL]”

o “LANGAGE [FRANÇAIS]”, y a contin-

uación presione [ENTER] repetidamente para

seleccionar el idioma deseado y luego pre-

sione [SETUP].

3 Presione [ENTER].

ENTER

El sintonizador explora y memoriza todos los

canales activos de su localidad.

El sintonizador se detiene en el canal memorizado

inferior.

•

NOTA

Cuando está activado “PREA. AUTO CA.”

•

donde no hay entrada de señal de TV, apare-

cerá “NO HAY SEÑAL DE TV” en la pan-

talla después de completarse la exploración

de los canales

La unidad puede reconocer canales CATV como

canales de TV si las condiciones de recepción

son malas. En este caso, compruebe la conexión

de la antena y vuelva a intentar “PREA. AUTO

CA.” cuando las condiciones de recepción

mejoren.

La programación de canales memorizados

NO es necesaria cuando la unidad está conec-

tada a una caja de convertidor o caja de

satélite. Sólo tiene que seleccionar el canal

para caja de convertidor o entrada de satélite

(ej. CH3) de la unidad y a continuación selec-

cione el canal que desee en la caja de conver-

tidor o la caja de satélite.

•

- 43 -

Download from Www.Somanuals.com. All Manuals Search And Download.

SECCIÓN DE DVD

REPRODUCCIÓN DE UN DISCO

POWER PICTURE SELECT

EJECT

5 Precione [EJECT A] para extraer la disco de

la unidad.

EJECT

SKIP

ZOOM

MUTE

NOTA

Cuando el modo DVD se ha cambiado al modo

•

TV, el modo DVD se desactiva primero y a

continuación aparece la imagen y suena el

sonido en el TV al cabo de unos 4 segundos.

De la misma manera, cuando se presiona

[POWER] para apagar la unidad en el modo

DVD, este modo se desactiva primero y a con-

tinuación se apaga la unidad.

PLAY

STOP

REV

FWD

DISC

PAUSE SLOW

DISPLAY

ENTER

SETUP

TITLE

RETURN

Puede aparecer “

” en la parte superior

•

derecha de la pantalla del TV durante su fun-

cionamiento, que avisa de que el DVD o el

disco han encontrado una operación prohibida.

Con los DVD que utilizan títulos para señales

de reproducción programada, la reproducción

puede empezar desde el segundo título y

puede omitir estos títulos.

Durante la reproducción de un disco de dos

capas, las imágenes pueden detenerse durante

un rato. Esto ocurre cuando la 1ª capa cambia

a la 2ª. No se trata de una anomalía.

Los botones sombreados se utilizan para las sigu-

ientes operaciones.

•

REPRODUCCIÓN BÁSICA

PARA EMPEZAR

Si es necesario, encienda el amplificador y cualquier

otro componente.

REPRODUCCIÓN DE MP3

1 Presione [POWER] para encender la unidad.

POWER

En el modo de parada, presione [DISC MENU] y precione

[K] o [L] para seleccionar el grupo o pista que desee.

2 Abra la bandeja del disco manualmente.

LISTA DE ARCHIVOS

NOMBRE DE DISCO

DISC

Nombre de carpeta 1

Nombre de carpeta 2

Nombre de carpeta 3

Nombre de carpeta 4

Nombre de archivo 1

Nombre de archivo 2

Nombre de archivo 3

Nombre de carpeta 1

Introduzca el disco elegido con la etiqueta hacia la parte trasera de la

unidad para reproducirlo. Al presionar suavemente el disco para intro-

ducirlo en la ranura, su reproducción empezará automáticamente.

Si ha selecciona un grupo, presione [B] o

[ENTER] para ir a la pantalla de selección de

pistas. Presione [s] para volver a la pantalla

anterior (excepto la página superior).

Si ha seleccionado una pista, presione [ENTER]

para empezar a reproducir pistas. Si empieza por

la que acaba de elegir se reproducirán las pistas

siguientes.

Si no puede visualizarse enseguida en pantalla la

lista entera de archivos, aparece la “n”para ir a la

página siguiente. appears to go to the next page.

Presione [TITLE] para volver al archivo superior

de la jerarquía más alta del programa y de la

lista de archivos.

•

La reproducción empezará desde el primer capí-

tulo/pista del disco.

•

Si la reproducción no empieza automáticamente,

presione [PLAY O].

•

Presione [STOP C] para detener la reproducción.

Presione [STOP ] para detener la reproducción.

STOP

- 44 -

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTA

REANUDACIÓN

Las carpetas se conocen como grupos; los

•

archivos, como pistas.

Los archivos MP3 van acompañados de

iconos.

1 Durante la reproducción, presione [STOP C].

Se puede reconocer un máximo de 255 carpetas.

Se puede reconocer un máximo de 999 archivos.

Pueden crearse hasta 8 jerarquías.

•

REANUDACIÓN ACTIVADA

Se recomienda para esta unidad el uso de

archivos grabados según las especificaciones

siguientes:

STOP

Presione 'PLAY' para reproducir

desde aquí.

Para reproducir desde el inicio,

primero presione 'STOP' y luego 'PLAY'.

Frecuencia de muestreo: 44,1 kHz o 48kHz

•

Velocidad de transmisión de bits constante:

•

32kbps ~ 320kbps

(Ejemplo: DVD o CD audio)

Para archivos MP3 grabados en velocidad de

•

Aparecerá el mensaje de reanudación en la pan-

talla del TV.

•

transmisión de bits variable (VBR), la unidad

puede no mostrar el tiempo real transcurrido.

2 Presione [PLAY O], la reproducción contin-

uará desde el punto donde se paró la repro-

ducción.

MENÚ DE DISCO

PLAY

Para cancelar el modo de reanudación, presione

dos veces [STOP C].

Para MP3, la reproducción se reanudará desde el

•

1 Presione [DISC MENU].

principio de la pista actual.

DISC

La información de reanudación permanece activa-

da incluso cuando apaga el interruptor principal.

•

Aparecerá el menú principal de DVD

Si esta función no está disponible,

lo puede aparecer en la pantalla del televisor.

Si el menú de disco está disponible en el disco,

aparecerán las opciones de idioma de audio, de

subtítulos, capítulos del título y otras para su

selección.

•

el símbo-

•

2 Presione [K], [L], [s] o [B] para seleccionar

un ítem y presione [ENTER] para confirmar la

selección.

ENTER

- 45 -

Download from Www.Somanuals.com. All Manuals Search And Download.

MEMO

- 46 -

Download from Www.Somanuals.com. All Manuals Search And Download.

MEMO

- 47 -

Download from Www.Somanuals.com. All Manuals Search And Download.

LIMITED WARRANTY

FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or

workmanship as follows:

DURATION:

PARTS:

FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the

date of original retail purchase. Two (2) years for Picture Tube. Certain parts and LCD image burn-in

are not covered under this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of

original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE

RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH

THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing

or if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to

any product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It

does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not

supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,

alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this

product or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE

USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF

FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS

REPRESENTATIVES IN THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED

SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO A FUNAI

AUTHORIZED SERVICE FACILITY.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE

UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI

CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT

WITHOUT PRIOR NOTICE.

To locate your nearest Authorized Service Center or for general service inquiries, please call or

write to the following:

FUNAI CORPORATION, INC.

SERVICE CENTER

19900 Van Ness Avenue, Torrance, CA 90501

Tel :1-800-968-3429

http://www.SylvaniaConsumerElectronics.com

Head Office: 100 North Street, Teterboro, NJ 07608

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

Printed in China

1EMN20335

L3150UA ★★★★★

Download from Www.Somanuals.com. All Manuals Search And Download.

Sennheiser Microphone MKH 800 Twin User Manual
Sony Car Stereo System CDXGT740UI User Manual
Sony Ericsson Cell Phone W550i User Manual
Sony Home Theater System 3 094 057 221 User Manual
Sony Laptop PCG 838 User Manual
Sony Speaker System SS SP32FW User Manual
Stanton CD Player C502 User Manual
StarTechcom Computer Drive IDE2510U2 User Manual
Subaru Robin Power Products Automobile Parts EX13 User Manual
Tanita Scale TL 150MA User Manual